Update libstdc++ manual in preparation for GCC 8 release
[gcc.git] / libstdc++-v3 / libsupc++ / Makefile.am
1 ## Makefile for the GNU C++ Support library.
2 ##
3 ## Copyright (C) 2000-2018 Free Software Foundation, Inc.
4 ##
5 ## Process this file with automake to produce Makefile.in.
6 ##
7 ## This file is part of GCC.
8 ##
9 ## GCC is free software; you can redistribute it and/or modify
10 ## it under the terms of the GNU General Public License as published by
11 ## the Free Software Foundation; either version 3, or (at your option)
12 ## any later version.
13 ##
14 ## GCC is distributed in the hope that it will be useful,
15 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
16 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 ## GNU General Public License for more details.
18 ##
19 ## You should have received a copy of the GNU General Public License
20 ## along with GCC; see the file COPYING3. If not see
21 ## <http://www.gnu.org/licenses/>.
22
23 include $(top_srcdir)/fragment.am
24
25 # Need this library to both be part of libstdc++.a, and installed
26 # separately too.
27 # 1) separate libsupc++.la
28 toolexeclib_LTLIBRARIES = libsupc++.la
29
30 # 2) integrated libsupc++convenience.la that is to be a part of libstdc++.a
31 noinst_LTLIBRARIES = libsupc++convenience.la
32
33 std_HEADERS = \
34 cxxabi.h exception initializer_list new typeinfo
35
36 bits_HEADERS = \
37 atomic_lockfree_defines.h cxxabi_forced.h \
38 exception_defines.h exception_ptr.h hash_bytes.h nested_exception.h exception.h cxxabi_init_exception.h
39
40 headers = $(std_HEADERS) $(bits_HEADERS)
41
42 if GLIBCXX_HOSTED
43 c_sources = \
44 cp-demangle.c
45 endif
46
47 sources = \
48 array_type_info.cc \
49 atexit_arm.cc \
50 atexit_thread.cc \
51 bad_alloc.cc \
52 bad_array_length.cc \
53 bad_array_new.cc \
54 bad_cast.cc \
55 bad_typeid.cc \
56 class_type_info.cc \
57 del_op.cc \
58 del_ops.cc \
59 del_opnt.cc \
60 del_opv.cc \
61 del_opvs.cc \
62 del_opvnt.cc \
63 dyncast.cc \
64 eh_alloc.cc \
65 eh_arm.cc \
66 eh_aux_runtime.cc \
67 eh_call.cc \
68 eh_catch.cc \
69 eh_exception.cc \
70 eh_globals.cc \
71 eh_personality.cc \
72 eh_ptr.cc \
73 eh_term_handler.cc \
74 eh_terminate.cc \
75 eh_tm.cc \
76 eh_throw.cc \
77 eh_type.cc \
78 eh_unex_handler.cc \
79 enum_type_info.cc \
80 function_type_info.cc \
81 fundamental_type_info.cc \
82 guard.cc \
83 guard_error.cc \
84 hash_bytes.cc \
85 nested_exception.cc \
86 new_handler.cc \
87 new_op.cc \
88 new_opnt.cc \
89 new_opv.cc \
90 new_opvnt.cc \
91 new_opa.cc \
92 new_opant.cc \
93 new_opva.cc \
94 new_opvant.cc \
95 del_opa.cc \
96 del_opant.cc \
97 del_opsa.cc \
98 del_opva.cc \
99 del_opvant.cc \
100 del_opvsa.cc \
101 pbase_type_info.cc \
102 pmem_type_info.cc \
103 pointer_type_info.cc \
104 pure.cc \
105 si_class_type_info.cc \
106 tinfo.cc \
107 tinfo2.cc \
108 vec.cc \
109 vmi_class_type_info.cc \
110 vterminate.cc
111
112 if ENABLE_VTABLE_VERIFY
113 if !VTV_CYGMIN
114 vtv_sources = \
115 vtv_stubs.cc
116 endif
117 endif
118
119 libsupc___la_SOURCES = $(sources) $(c_sources) $(vtv_sources)
120 libsupc__convenience_la_SOURCES = $(sources) $(c_sources) $(vtv_sources)
121
122 cp-demangle.c:
123 rm -f $@
124 $(LN_S) $(toplevel_srcdir)/libiberty/cp-demangle.c $@
125 cp-demangle.lo: cp-demangle.c
126 $(LTCOMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
127 cp-demangle.o: cp-demangle.c
128 $(C_COMPILE) -DIN_GLIBCPP_V3 -Wno-error -c $<
129
130
131 # Use special rules for the C++17 sources so that the proper flags are passed.
132 new_opa.lo: new_opa.cc
133 $(LTCXXCOMPILE) -std=gnu++1z -c $<
134 new_opant.lo: new_opant.cc
135 $(LTCXXCOMPILE) -std=gnu++1z -c $<
136 new_opva.lo: new_opva.cc
137 $(LTCXXCOMPILE) -std=gnu++1z -c $<
138 new_opvant.lo: new_opvant.cc
139 $(LTCXXCOMPILE) -std=gnu++1z -c $<
140 del_opa.lo: del_opa.cc
141 $(LTCXXCOMPILE) -std=gnu++1z -c $<
142 del_opant.lo: del_opant.cc
143 $(LTCXXCOMPILE) -std=gnu++1z -c $<
144 del_opsa.lo: del_opsa.cc
145 $(LTCXXCOMPILE) -std=gnu++1z -c $<
146 del_opva.lo: del_opva.cc
147 $(LTCXXCOMPILE) -std=gnu++1z -c $<
148 del_opvant.lo: del_opvant.cc
149 $(LTCXXCOMPILE) -std=gnu++1z -c $<
150 del_opvsa.lo: del_opvsa.cc
151 $(LTCXXCOMPILE) -std=gnu++1z -c $<
152
153 # AM_CXXFLAGS needs to be in each subdirectory so that it can be
154 # modified in a per-library or per-sub-library way. Need to manually
155 # set this option because CONFIG_CXXFLAGS has to be after
156 # OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
157 # as the occasion call for it.
158 AM_CXXFLAGS = \
159 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \
160 $(XTEMPLATE_FLAGS) \
161 $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS)
162
163 AM_MAKEFLAGS = \
164 "gxx_include_dir=$(gxx_include_dir)"
165
166
167 # Use special rules for pulling things out of libiberty. These
168 # objects should be compiled with the "C" compiler, not the C++
169 # compiler, and also should not use the C++ includes.
170 C_INCLUDES = -I.. -I$(toplevel_srcdir)/libiberty -I$(toplevel_srcdir)/include
171 C_COMPILE = \
172 $(CC) $(DEFS) $(C_INCLUDES) \
173 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)
174
175 # LTCOMPILE is copied from LTCXXCOMPILE below.
176 LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared $(LIBTOOLFLAGS) --mode=compile \
177 $(CC) $(DEFS) $(C_INCLUDES) \
178 $(glibcxx_lt_pic_flag) $(glibcxx_compiler_shared_flag) \
179 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(EXTRA_CFLAGS)
180
181 # Libtool notes
182
183 # 1) In general, libtool expects an argument such as `--tag=CXX' when
184 # using the C++ compiler, because that will enable the settings
185 # detected when C++ support was being configured. However, when no
186 # such flag is given in the command line, libtool attempts to figure
187 # it out by matching the compiler name in each configuration section
188 # against a prefix of the command line. The problem is that, if the
189 # compiler name and its initial flags stored in the libtool
190 # configuration file don't match those in the command line, libtool
191 # can't decide which configuration to use, and it gives up. The
192 # correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
193 # CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
194 # attempt to infer which configuration to use.
195 #
196 # The second tag argument, `--tag disable-shared` means that libtool
197 # only compiles each source once, for static objects. In actuality,
198 # glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to
199 # the libtool command that is used create the object, which is
200 # suitable for shared libraries. The `--tag disable-shared` must be
201 # placed after --tag CXX lest things CXX undo the affect of
202 # disable-shared.
203
204 # 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is
205 # last. (That way, things like -O2 passed down from the toplevel can
206 # be overridden by --enable-debug.)
207 LTCXXCOMPILE = \
208 $(LIBTOOL) --tag CXX --tag disable-shared \
209 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
210 --mode=compile $(CXX) $(TOPLEVEL_INCLUDES) \
211 $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS)
212
213 LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))
214
215 # 3) We'd have a problem when building the shared libstdc++ object if
216 # the rules automake generates would be used. We cannot allow g++ to
217 # be used since this would add -lstdc++ to the link line which of
218 # course is problematic at this point. So, we get the top-level
219 # directory to configure libstdc++-v3 to use gcc as the C++
220 # compilation driver.
221 CXXLINK = \
222 $(LIBTOOL) --tag CXX --tag disable-shared \
223 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
224 --mode=link $(CXX) \
225 $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@
226
227 # Install notes
228 # We have to have rules modified from the default to counteract SUN make
229 # prepending each of $(*_HEADERS) with VPATH below.
230 stddir = $(gxx_include_dir)
231 bitsdir = $(gxx_include_dir)/bits
232
233 install-stdHEADERS: $(std_HEADERS)
234 @$(NORMAL_INSTALL)
235 $(mkinstalldirs) $(DESTDIR)$(stddir)
236 @list='$(std_HEADERS)'; for p in $$list; do \
237 q=`echo $$p | sed -e 's,.*/,,'`; \
238 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
239 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q"; \
240 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(stddir)/$$q; \
241 done
242
243 install-bitsHEADERS: $(bits_HEADERS)
244 @$(NORMAL_INSTALL)
245 $(mkinstalldirs) $(DESTDIR)$(bitsdir)
246 @list='$(bits_HEADERS)'; for p in $$list; do \
247 q=`echo $$p | sed -e 's,.*/,,'`; \
248 if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
249 echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q"; \
250 $(INSTALL_DATA) $$d$$p $(DESTDIR)$(bitsdir)/$$q; \
251 done
252
253 uninstall-stdHEADERS:
254 @$(NORMAL_UNINSTALL)
255 list='$(std_HEADERS)'; for p in $$list; do \
256 q=`echo $$p | sed -e 's,.*/,,'`; \
257 rm -f $(DESTDIR)$(stddir)/$$q; \
258 done
259
260 uninstall-bitsHEADERS:
261 @$(NORMAL_UNINSTALL)
262 list='$(bits_HEADERS)'; for p in $$list; do \
263 q=`echo $$p | sed -e 's,.*/,,'`; \
264 rm -f $(DESTDIR)$(bitsdir)/$$q; \
265 done
266
267
268 # By adding these files here, automake will remove them for 'make clean'
269 CLEANFILES = stamp-*
270