1 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3 * ppc-opc.c (powerpc_operands): Make comment match the
4 actual fields (no shift field).
5 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
7 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
8 partial implementation, work in progress.
9 * tic80-opc.c (tic80_operands): Begin construction operands table.
10 (tic80_opcodes): Continue populating opcodes table and start
11 filling in the operand indices.
12 (tic80_num_opcodes): Add this.
15 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
17 * m68k-opc.c: Add #B case for moveq.
19 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
21 * mn10300-dis.c (disassemble): Make sure all variables are initialized
25 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
27 * v850-opc.c (v850_opcodes): Put curly-braces around operands
28 for "breakpoint" instruction.
31 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
33 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
34 (dep): Use ALL_CFLAGS rather than CFLAGS.
37 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
39 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
43 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
45 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
47 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
50 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
52 * mips16-opc.c: Add "abs".
55 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
57 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
58 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
59 (disassembler): Add bfd_arch_tic80 support to set disassemble
61 * tic80-dis.c (print_insn_tic80): Add stub.
63 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
65 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
66 * configure: Regenerate with autoconf.
67 * tic80-dis.c: Add file.
68 * tic80-opc.c: Add file.
72 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
74 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
77 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
79 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
80 (mn10200_opcodes): Use it for some logicals and btst insns.
81 Add "break" and "trap" instructions.
83 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
85 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
87 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
89 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
90 relative load or add now depends upon whether the instruction is
93 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
95 * mn10200-dis.c: Finish writing disassembler.
96 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
97 Fix mask for "jmp (an)".
99 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
100 handle endianness issues for mn10300.
102 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
104 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
106 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
107 instruction. Fix opcode field for "movb (imm24),dn".
109 * mn10200-opc.c (mn10200_operands): Fix insertion position
112 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
114 * mn10200-opc.c: Create mn10200 opcode table.
115 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
116 but moving along nicely.
118 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
120 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
122 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
124 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
125 specifiers for fmovem* instructions.
127 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
129 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
131 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
133 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
136 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
138 * mn10300-opc.c: Add some comments explaining the various
141 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
143 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
145 * m68k-dis.c (print_insn_arg): Handle new < and > operand
148 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
149 operand specifiers in fmovm* instructions.
151 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
153 * ppc-opc.c (insert_li): Give an error if the offset has the two
154 least significant bits set.
156 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
158 * mips-dis.c (print_insn_mips16): Separate the instruction from
159 the arguments with a tab, not a space.
161 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
163 * mn10300-dis.c (disasemble): Finish conversion to '$' as
166 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
169 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
171 * configure: Rebuild with autoconf 2.12.
173 Add support for mips16 (16 bit MIPS implementation):
174 * mips16-opc.c: New file.
175 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
176 (mips16_reg_names): New static array.
177 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
178 after seeing a 16 bit symbol.
179 (print_insn_little_mips): Likewise.
180 (print_insn_mips16): New static function.
181 (print_mips16_insn_arg): New static function.
182 * mips-opc.c: Add jalx instruction.
183 * Makefile.in (mips16-opc.o): New target.
184 * configure.in: Use mips16-opc.o for bfd_mips_arch.
185 * configure: Rebuild.
187 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
189 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
190 operand specifiers in *save, *restore and movem* instructions.
192 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
195 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
196 register operands for immediate arithmetic, not, neg, negx, and
197 set according to condition instructions.
199 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
200 specifier of the effective-address operand in immediate forms of
201 arithmetic instructions. The specifier for the immediate operand
202 notes how and where the constant will be stored.
204 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
206 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
209 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
212 * mn10300-dis.c (disassemble): Prefix registers with '%'.
214 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
216 * mn10300-dis.c (disassemble): Handle register lists.
218 * mn10300-opc.c: Fix handling of register list operand for
219 "call", "ret", and "rets" instructions.
221 * mn10300-dis.c (disassemble): Print PC-relative and memory
222 addresses symbolically if possible.
223 * mn10300-opc.c: Distinguish between absolute memory addresses,
224 pc-relative offsets & random immediates.
226 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
228 (disassemble): Handle SPLIT and EXTENDED operands.
230 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
232 * mn10300-dis.c: Rough cut at printing some operands.
234 * mn10300-dis.c: Start working on disassembler support.
235 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
237 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
239 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
242 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
244 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
247 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
249 * mn10300-opc.c (mn10300_opcodes): Demand parens around
250 register argument is calls and jmp instructions.
252 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
254 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
255 getx operand. Fix opcode for mulqu imm,dn.
257 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
259 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
260 in MN10300_OPERAND_SPLIT operands for how many bits
261 appear in the basic insn word. Add IMM32_HIGH24,
262 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
263 (mn10300_opcodes): Use new operands as needed.
265 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
266 for bset, bclr, btst instructions.
267 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
269 * mn10300-opc.c (mn10300_operands): Remove many redundant
270 operands. Update opcode table as appropriate.
271 (IMM32): Add MN10300_OPERAND_SPLIT flag.
272 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
274 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
276 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
277 operands (for indexed load/stores). Fix bitpos for DI
278 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
279 few instructions that insert immediates/displacements in the
280 middle of the instruction. Add IMM8E for 8 bit immediate in
281 the extended part of an instruction.
282 (mn10300_operands): Use new opcodes as appropriate.
285 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
287 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
288 sequential so the assembler never parallelizes it with
292 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
294 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
295 a data/address register that appears in register field 0
296 and register field 1.
297 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
299 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
301 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
302 standard disassembly.
304 * alpha-opc.c (alpha_operands): Rearrange flags slot.
305 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
306 Recategorize PALcode instructions.
309 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
311 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
314 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
316 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
317 there are no operand types.
320 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
322 * v850-opc.c (D9_RELAX): Renamed from D9, all references
324 (v850_operands): Make sure D22 immediately follows D9_RELAX.
327 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
329 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
332 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
334 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
335 and sst.w instructions.
337 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
341 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
343 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
346 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
348 * ppc-opc.c (PPCPWR2): Define.
349 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
352 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
354 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
355 field for movhu instruction.
358 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
359 cast value to "long" not "signed long" to keep hpux10
363 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
365 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
368 * mn10300-opc.c (FMT*): Remove definitions.
370 * mn10300-opc.c (mn10300_opcodes): Fix destination register
371 for shift-by-register opcodes.
373 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
374 into [AD][MN][01] for encoding the position of the register
377 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
379 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
380 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
382 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
384 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
385 Fix various typos. Add "PAREN" operand.
387 (mn10300_opcodes): Surround all memory addresses with "PAREN"
388 operands. Fix several typos.
390 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
393 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
395 * mn10300-opc.c (FMT_XX): Renumber starting at one.
396 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
398 (mn10300_opcodes): Break opcode format out into its own field.
399 Update many operand fields to deal with signed vs unsigned
400 issues. Fix one or two typos in the "mov" instruction
401 opcode, mask and/or operand fields.
403 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
405 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
408 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
410 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
411 all opcodes. Very rough cut at operands for all opcodes.
413 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
416 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
418 * mn10200-opc.c, mn10300-opc.c: New files.
419 * mn10200-dis.c, mn10300-dis.c: New files.
420 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
421 * disassemble.c: Break mn10x00 support into 10200 and 10300
423 * configure.in: Likewise.
424 * configure: Rebuilt.
426 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
428 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
430 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
432 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
434 * disassemble (ARCH_mn10x00): Define.
435 (disassembler): Handle bfd_arch_mn10x00.
436 * configure.in: Recognize bfd_mn10x00_arch.
437 * configure: Rebuilt.
439 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
441 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
442 accordingly. Don't declare functions using op_rtn.
445 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
447 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
448 params to be more standard.
449 * (disassemble): Print absolute addresses and symbolic names for
450 branch and jump targets.
451 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
453 * (v850_opcodes): Add breakpoint insn.
456 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
458 * m68k-opc.c: Move the fmovemx data register cases before the
459 other cases, so that they get recognized before the data register
460 does gets treated as a degenerate register list.
462 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
464 * mips-opc.c: Add a case for "div" and "divu" with two registers
465 and a destination of $0.
467 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
469 * mips-dis.c (print_insn_arg): Add prototype.
470 (_print_insn_mips): Ditto.
472 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
474 * mips-dis.c (print_insn_arg): Print condition code registers as
477 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
479 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
482 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
484 * v850-dis.c (disassemble): Make static. Provide prototype.
486 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
488 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
491 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
493 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
494 ']' characters into the output stream.
495 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
496 Add "memop" field to all opcodes (for the disassembler).
497 Reorder opcodes so that "nop" comes before "mov" and "jr"
500 * v850-dis.c (print_insn_v850): Fix typo in last change.
502 * v850-dis.c (print_insn_v850): Properly handle disassembling
503 a two byte insn at the end of a memory region when the memory
504 region's size is only two byte aligned.
506 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
508 * v850-dis.c (v850_reg_names): Define.
509 (v850_sreg_names, v850_cc_names): Likewise.
510 (disassemble): Very rough cut at printing operands (unformatted).
512 * v850-opc.c (BOP_MASK): Fix.
513 (v850_opcodes): Fix mask for jarl and jr.
515 * v850-dis.c: New file. Skeleton for disassembler support.
516 * Makefile.in Remove v850 references, they're not needed here
517 and they weren't being sanitized away.
518 * configure.in: Add v850-dis.o when building v850 toolchains.
519 * configure: Rebuilt.
520 * disassemble.c (disassembler): Call v850 disassembler.
522 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
523 (insert_d8_6, extract_d8_6): New functions.
524 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
525 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
527 (IF4A, IF4B): Use "D7" instead of "D7S".
528 (IF4C, IF4D): Use "D8_7" instead of "D8".
529 (IF4E, IF4F): New. Use "D8_6".
530 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
531 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
533 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
534 (v850_operands): Change D16 to D16_15, use special insert/extract
535 routines. New new D16 that uses the generic insert/extract code.
536 (IF7A, IF7B): Use D16_15.
537 (IF7C, IF7D): New. Use D16.
538 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
540 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
541 message. Issue an error if the branch offset is odd.
543 * v850-opc.c: Add notes about needing special insert/extract
544 for all the load/store insns, except "ld.b" and "st.b".
546 * v850-opc.c (insert_d22, extract_d22): New functions.
547 (v850_operands): Use insert_d22 and extract_d22 for
549 (insert_d9): Fix range check.
551 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
553 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
554 and set bits field to D9 and D22 operands.
556 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
558 * v850-opc.c (v850_operands): Define SR2 operand.
559 (v850_opcodes): "ldsr" uses R1,SR2.
561 * v850-opc.c (v850_opcodes): Fix opcode specs for
562 sld.w, sst.b, sst.h, sst.w, and nop.
564 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
566 * v850-opc.c (v850_opcodes): Add null opcode to mark the
567 end of the opcode table.
571 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
573 * d10v-opc.c (pre_defined_registers): Added register pairs,
574 "r0-r1", "r2-r3", etc.
578 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
580 * v850-opc.c (v850_operands): Make I16 be a signed operand.
581 Create I16U for an unsigned 16bit mmediate operand.
582 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
584 * v850-opc.c (v850_operands): Define EP operand.
585 (IF4A, IF4B, IF4C, IF4D): Use EP.
587 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
588 with immediate operand, "movhi". Tweak "ldsr".
590 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
591 correct. Get sld.[bhw] and sst.[bhw] closer.
593 * v850-opc.c (v850_operands): "not" is a two byte insn
595 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
597 * v850-opc.c (v850_operands): D16 inserts at offset 16!
599 * v850-opc.c (two): Get order of words correct.
601 * v850-opc.c (v850_operands): I16 inserts at offset 16!
603 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
604 register source and destination operands.
605 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
607 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
608 same thinko in "trap" opcode.
610 * v850-opc.c (v850_opcodes): Add initializer for size field
613 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
614 Add D8 for 8-bit unsigned field in short load/store insns.
615 (IF4A, IF4D): These both need two registers.
616 (IF4C, IF4D): Define. Use 8-bit unsigned field.
617 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
618 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
619 for "ldsr" and "stsr".
620 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
623 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
624 short store word (sst.w).
626 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
628 * v850-opc.c (v850_operands): Added insert and extract fields,
629 pointers to functions that handle unusual operand encodings.
631 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
633 * v850-opc.c (v850_opcodes): Enable "trap".
635 * v850-opc.c (v850_opcodes): Fix order of displacement
636 and register for "set1", "clr1", "not1", and "tst1".
638 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
640 * v850-opc.c (v850_operands): Add "B3" support.
641 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
644 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
646 * v850-opc.c: Close unterminated comment.
648 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
650 * v850-opc.c (v850_operands): Add flags field.
651 (v850_opcodes): add move opcodes.
653 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
655 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
656 * configure: (bfd_v850v_arch) Add new case.
657 * configure.in: (bfd_v850_arch) Add new case.
658 * v850-opc.c: New file.
661 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
663 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
666 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
668 * d10v-opc.c: Add additional information to the opcode
669 table to help determinine which instructions can be done
673 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
675 * mpw-make.sed: Update editing of include pathnames to be
678 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
680 * arm-opc.h: Added "bx" instruction definition.
682 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
684 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
687 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
689 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
691 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
693 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
696 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
698 * makefile.vms: Update for alpha-opc changes.
700 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
702 * i386-dis.c (print_insn_i386): Actually return the correct value.
703 (ONE, OP_ONE): #ifdef out; not used.
706 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
708 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
709 Changed subi operand type to treat 0 as 16.
712 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
714 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
717 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
719 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
720 memory transfer instructions. Add new format string entries %h and %s.
721 * arm-dis.c: (print_insn_arm): Provide decoding of the new
725 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
727 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
728 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
731 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
733 * alpha-dis.c (print_insn_alpha_osf): Remove.
734 (print_insn_alpha_vms): Remove.
735 (print_insn_alpha): Make globally visible. Chose the register
736 names based on info->flavour.
737 * disassemble.c: Always return print_insn_alpha for the alpha.
740 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
742 * d10v-dis.c (dis_long): Handle unknown opcodes.
744 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
746 * d10v-opc.c: Changes to support signed and unsigned numbers.
747 All instructions with the same name that have long and short forms
748 now end in ".l" or ".s". Divs added.
749 * d10v-dis.c: Changes to support signed and unsigned numbers.
751 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
753 * d10v-dis.c: Change all functions to use info->print_address_func.
756 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
758 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
759 move ccr/sr insns more strict so that the disassembler only
760 selects them when the addressing mode is data register.
763 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
764 * d10v-opc.c (pre_defined_registers): Declare.
765 * d10v-dis.c (print_operand): Now uses pre_defined_registers
766 to pick a better name for the registers.
769 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
771 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
772 operands for fexpand and fpmerge. From Christian Kuehnke
773 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
775 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
777 * alpha-dis.c (print_insn_alpha): No longer the user-visible
778 print routine. Take new regnames and cpumask arguments.
779 Kill the environment variable nonsense.
780 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
781 (print_insn_alpha_vms): New function. Do VMS style regnames.
782 * disassemble.c (disassembler): Test bfd flavour to pick
783 between OSF and VMS routines. Default to OSF.
785 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
787 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
788 * configure: Rebuild.
789 * Makefile.in (install): Use @INSTALL_SHLIB@.
792 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
794 * configure: (bfd_d10v_arch) Add new case.
795 * configure.in: (bfd_d10v_arch) Add new case.
796 * d10v-dis.c: New file.
797 * d10v-opc.c: New file.
798 * disassemble.c (disassembler) Add entry for d10v.
801 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
803 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
804 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
806 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
808 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
809 distinguish between variants of the instruction set.
810 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
811 distinguish between variants of the instruction set.
813 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
815 * i386-dis.c (print_insn_i8086): New routine to disassemble using
816 the 8086 instruction set.
817 * i386-dis.c: General cleanups. Make most things static. Add
818 prototypes. Get rid of static variables aflags and dflags. Pass
819 them as args (to almost everything).
821 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
823 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
825 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
827 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
828 if the next arg is marked with SRC_IN_DST. Gross.
830 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
831 we're looking for and find EXR.
833 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
834 if we're looking for KBIT and we don't find it.
836 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
839 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
840 3bit immediate operands.
842 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
844 * Released binutils 2.7.
846 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
847 <kkaempf@progis.ac-net.de>.
849 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
851 * alpha-opc.c: Correct second case of "mov" to use OPRL.
853 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
855 * sparc-dis.c (print_insn_sparclite): New routine to print
856 sparclite instructions.
858 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
860 * m68k-opc.c (m68k_opcodes): Add coldfire support.
862 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
864 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
865 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
866 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
868 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
870 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
871 Use autoconf-set values.
872 (docdir, oldincludedir): Removed.
873 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
875 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
877 * alpha-opc.c: New file.
878 * alpha-opc.h: Remove.
879 * alpha-dis.c: Complete rewrite to use new opcode table.
880 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
881 * configure: Rebuild with autoconf 2.10.
882 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
883 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
885 (alpha-opc.o): New target.
887 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
889 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
890 Set imm_added_to_rs1 even if the source and destination register
893 * sparc-opc.c: Add some two operand forms of the wr instruction.
895 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
897 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
900 * disassemble.c (disassembler): Handle H8/S.
901 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
903 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
905 * sparc-opc.c: Add beq/teq as aliases for be/te.
907 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
908 <sergei@msil.sps.mot.com>.
910 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
912 * makefile.vms: New file.
914 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
916 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
918 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
921 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
923 * i386-dis.c (OP_OFF): Call append_prefix.
925 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
927 * ppc-opc.c (instruction encoding macros): Add explicit casts to
928 unsigned long to silence a warning from the Solaris PowerPC
931 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
933 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
935 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
937 * sparc-dis.c (X_IMM,X_SIMM): New macros.
939 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
940 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
941 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
942 cpush, cpusha, cpull sparclet insns.
944 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
946 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
948 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
950 * sparc-opc.c: Set F_FBR on floating point branch instructions.
951 Set F_FLOAT on other floating point instructions.
953 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
955 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
957 (powerpc_opcodes): Add 860/821 specific SPRs.
959 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
961 * configure.in: Permit --enable-shared to specify a list of
962 directories. Set and substitute BFD_PICLIST.
963 * configure: Rebuild.
964 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
965 uses. Set to @BFD_PICLIST@.
967 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
969 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
970 not "abs", which may be needed for the absolute in something
971 like btst #0,@10:8. Print L_3 immediates separately from other
972 immediates. Change ABSMOV reference to ABS8MEM.
974 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
976 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
977 (current_arch_mask): New static global.
978 (compute_arch_mask): New static function.
979 (print_insn_sparc): Delete sparc_v9_p. New static local
980 current_mach. Resort opcode table if current_mach changes.
981 Generalize "insn not supported" test.
982 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
983 Delete test for v9/!v9.
984 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
986 (brfc): Split into CBR and FBR for coprocessor/fp branches.
987 (brfcx): Renamed to FBRX.
988 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
989 coprocessor mnemonics are not supported on the sparclet).
990 (condf): Renamed to CONDF.
991 (SLCBCC2): Delete F_ALIAS flag.
993 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
995 * sparc-opc.c (sparc_opcodes): rd must be 0 for
996 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
998 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1000 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1001 that the shared library version number is set correctly.
1003 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1005 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1006 Miles Bader <miles@gnu.ai.mit.edu>.
1007 * configure: Rebuild.
1009 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1011 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1014 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1016 * configure: Rebuild with autoconf 2.8.
1018 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1020 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1021 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1023 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1025 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1026 since they appear as targets in Makefile.in.
1027 * configure: Rebuild.
1029 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1031 * mpw-make.sed: Edit out shared library support bits.
1033 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1035 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1036 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1037 (sparc_opcodes): Add sparclet insns.
1038 (sparclet_cpreg_table): New static local.
1039 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1040 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1042 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1044 * i386-dis.c (index16): New static variable.
1045 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1047 (OP_indirE): Return result of OP_E.
1048 (OP_E): Check for 16 bit addressing mode, and disassemble
1049 correctly. Optimised 32 bit case a little. Don't print
1050 "(base,index,scale)" when sib specifies only an offset.
1052 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1054 * configure.in: Set and substitute SHLIB_DEP.
1055 * configure: Rebuild.
1056 * Makefile.in (SHLIB_DEP): New variable.
1057 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1058 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1059 COMMON_SHLIB, add them to piclist with appropriate modifications.
1060 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1061 here: just use piclist.
1063 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1065 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1066 (print_insn_sparc): Rewrite v9/not-v9 tests.
1067 (compare_opcodes): Likewise.
1068 * sparc-opc.c (MASK_<ARCH>): Define.
1069 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1070 (sparclet,v6notv9): Define.
1071 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1072 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1074 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1076 * configure.in: Call AC_PROG_CC before configure.host.
1077 * configure: Rebuild.
1079 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1081 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1083 * i386-dis.c (onebyte_has_modrm): New static array.
1084 (twobyte_has_modrm): New static array.
1085 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1087 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1089 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1092 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1094 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1097 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1099 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1100 m68010up, not just m68020up | cpu32.
1102 * Makefile.in (SONAME): New variable.
1103 ($(SHLINK)): Make a link to the transformed name, as well.
1104 (stamp-tshlink): New target.
1105 (install): Skip stamp-tshlink during install.
1107 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1109 * configure.in: Call AC_ARG_PROGRAM.
1110 * configure: Rebuild.
1111 * Makefile.in (program_transform_name): New variable.
1112 (install): Transform library name before installing it.
1114 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1116 * i960-dis.c (mem): Add HX dcinva instruction.
1118 Support for building as a shared library, based on patches from
1119 Alan Modra <alan@spri.levels.unisa.edu.au>:
1120 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1121 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1122 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1123 * configure: Rebuild.
1124 * Makefile.in (ALLLIBS): New variable.
1125 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1126 (COMMON_SHLIB, SHLINK): New variables.
1127 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1128 (STAGESTUFF): Remove variable.
1129 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1130 (stamp-piclist, piclist): New targets.
1131 ($(SHLIB), $(SHLINK)): New targets.
1132 ($(OFILES)): Depend upon stamp-picdir.
1133 (disassemble.o): Build twice if PICFLAG is set.
1134 (MOSTLYCLEAN): Add pic/*.o.
1135 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1136 (distclean): Remove pic and stamp-picdir.
1137 (install): Install shared libraries.
1138 (stamp-picdir): New target.
1140 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1142 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1143 Print unknown instruction as "unknown", rather than in hex.
1145 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1147 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1149 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1151 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1153 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1155 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1156 when necessary. From Ulrich Drepper
1157 <drepper@myware.rz.uni-karlsruhe.de>.
1159 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1161 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1162 sparc_num_opcodes. Update architecture enum values.
1163 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1164 (sparc_opcode_lookup_arch): New function.
1165 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1166 (sparc_opcodes): Add v9a shutdown insn.
1168 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1170 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1171 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1173 (print_insn_sparc64): Deleted.
1174 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1177 * sparc-opc.c (architecture_pname): Add v9a.
1179 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1181 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1182 incorrectly defined as 0x16 when it should be 0x15.
1183 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1184 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1185 excb (exception barrier) which is defined in the Alpha
1186 Architecture Handbook version 2.
1187 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1188 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1189 disassembled as or, for example.
1191 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1193 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1194 (_print_insn_mips): Change i from int to unsigned int.
1196 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1198 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1199 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1201 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1203 * i386-dis.c: Added Pentium Pro instructions.
1205 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1207 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1210 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1212 * sh-opc.h (sh_nibble_type): Added REG_B.
1213 (sh_arg_type): Added A_REG_B.
1214 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1216 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1218 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1220 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1222 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1224 * Makefile.in (distclean): Remove stamp-h. From Ronald
1225 F. Guilmette <rfg@monkeys.com>.
1227 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1229 From David Mosberger-Tang <davidm@azstarnet.com>:
1230 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1233 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1235 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1236 (sh_table): Added many SH3 opcodes.
1237 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1239 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1241 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1242 (subco,subco.): Mark this PPC, not PPCCOM.
1244 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1246 * configure: Rebuild with autoconf 2.7.
1248 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1250 * configure: Rebuild with autoconf 2.6.
1252 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1254 * configure.in: Sort list of architectures. Accept but do nothing
1255 for alliant, convex, pyramid, romp, and tahoe.
1257 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1259 * a29k-dis.c (print_special): Change num to unsigned int.
1261 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1263 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1266 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1268 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1269 * configure: Rebuilt.
1271 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1273 * configure.in: Add case for bfd_i860_arch.
1274 * configure: Rebuild.
1276 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1278 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1279 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1280 (NEXTDOUBLE): Likewise.
1281 (print_insn_m68k): Don't match fmoveml if there is more than one
1282 register in the list.
1283 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1285 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1287 * m68k-opc.c: Use #W rather than #w.
1288 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1290 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1292 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1293 and likewise for all the dbxx opcodes.
1295 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1297 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1299 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1301 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1302 the VR4100 specific instructions to the mips_opcodes structure.
1304 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1306 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1307 ugly Metrowerks bug in CW6, is fixed in CW7.
1309 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1311 * ppc-opc.c (whole file): Add flags for common/any support.
1313 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1315 * Makefile.in (BISON): Remove macro.
1316 (FLAGS_TO_PASS): Remove BISON.
1318 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1320 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1322 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1323 instructions that take no args by looking at the match mask.
1324 (print_insn_arg): Always print "%" before register names.
1325 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1326 [case '_']: Don't print "@#" before address.
1327 [case 'J']: Use "%s" as format string, not register name.
1328 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1330 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1332 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1335 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1337 From David Mosberger-Tang <davidm@azstarnet.com>
1339 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1340 (alpha_insn_set): added definitions for VAX floating point
1341 instructions (Unix compilers don't generate these, but handcoded
1342 assembly might still use them).
1344 * alpha-dis.c (print_insn_alpha): added support for disassembling
1345 the miscellaneous instructions in the Alpha instruction set.
1347 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1349 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1350 no longer create sysdep.h, sed ppc-opc.c to work around a
1351 serious Metrowerks C bug.
1352 * mpw-make.in: Remove.
1353 * mpw-make.sed: New file, used by mpw-configure to edit
1354 Makefile.in into an MPW makefile.
1356 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1358 * Makefile.in (maintainer-clean): New synonym for realclean.
1360 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1362 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1363 which use '0', '1', and '2' instead. Specify the proper size for
1364 a pmove immediate operand. Correct the pmovefd patterns to be
1365 moves to a register, not from a register.
1366 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1368 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1370 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1371 %psr, %wim, %tbr as F_NOTV9.
1373 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1375 * Makefile.in (Makefile): Just rebuild Makefile when running
1377 (config.h, stamp-h): New targets.
1378 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1379 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1380 rebuilding config.h.
1381 * configure: Rebuild.
1383 * mips-opc.c: Change unaligned loads and stores with "t,A"
1384 operands to use "t,A(b)".
1386 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1388 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1390 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1392 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1393 until 3 instead of until 2.
1395 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1397 * Makefile.in (ALL_CFLAGS): Define.
1398 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1399 (MOSTLYCLEAN): Add config.log.
1400 (distclean): Don't remove config.log.
1401 * configure.in: Substitute HDEFINES.
1402 * configure: Rebuild.
1404 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1406 * sh-opc.h (sh_arg_type): Add F_FR0.
1407 (sh_table, case fmac): Add F_FR0 as first argument.
1409 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1411 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1413 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1415 * sparc-dis.c: Remove all references to NO_V9.
1417 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1419 * aclocal.m4: Just include ../bfd/aclocal.m4.
1420 * configure: Rebuild.
1422 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1424 * sparc-dis.c (X_DISP19): Define.
1425 (print_insn, case 'G'): Use it.
1426 (print_insn, case 'L'): Sign extend displacement.
1428 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1430 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1431 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1432 host_makefile_frag or frags.
1433 * aclocal.m4: New file.
1434 * configure: Rebuild.
1435 * Makefile.in (INSTALL): Set to @INSTALL@.
1436 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1437 (INSTALL_DATA): Set to @INSTALL_DATA@.
1439 (AR_FLAGS): Set to rc rather than qc.
1440 (CC): Define as @CC@.
1441 (CFLAGS): Set to @CFLAGS@.
1442 (@host_makefile_frag@): Remove.
1443 (config.status): Remove dependency upon @frags@.
1445 * configure.in: ../bfd/config.bfd now just sets shell variables.
1446 Use them rather than looking through target Makefile fragments.
1447 * configure: Rebuild.
1449 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1451 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1453 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1455 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1456 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1459 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1460 (lookup_{name,value}): New functions.
1461 (prefetch_table): New static local.
1462 (sparc_{encode,decode}_prefetch): New functions.
1463 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1465 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1467 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1470 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1472 * sh-dis.c: Correct comment on first line of file.
1474 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1476 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1478 * sparc-opc.c (asi, membar): New static locals.
1479 (sparc_{encode,decode}_{asi,membar}): New functions.
1480 (sparc_opcodes, membar insn): Fix.
1481 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1482 Support decoding of membar masks.
1485 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1487 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1489 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1491 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1492 and likewise for the other branches. Add bhs as an alias for bcc,
1493 and likewise for the size variants. Add dbhs as an alias for
1496 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1498 * sh-opc.h (FP sts instructions): Update to match reality.
1500 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1502 * m68k-dis.c: (fpcr_names): Add % before all register names.
1503 (reg_names): Likewise.
1504 (print_insn_arg): Don't explicitly print % before register names.
1505 Add % before register names in static array names. In case 'r',
1506 print data registers as `@(Dn)', not `Dn@'. When printing a
1507 memory address, don't print @# before it.
1508 (print_indexed): Change base_disp and outer_disp from int to
1509 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1510 syntax. Sign extend 8 byte displacement correctly.
1511 (print_base): Print using MIT syntax. Print zpc when appropriate.
1512 Change parameter disp from int to bfd_vma.
1514 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1517 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1519 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1520 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1521 * sh-opc.h (sh_arg_type): Add new operand types.
1522 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1524 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1526 * Makefile.in (distclean): Remove generated file config.h.
1528 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1530 * Makefile.in (distclean): Remove generated file config.h.
1532 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1534 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1536 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1538 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1539 rather than numopcodes. Use m68k_opcodes rather than removed
1540 opcode function. Don't check F_ALIAS.
1541 (print_insn_arg): Change first parameter to be const char *.
1542 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1543 (m68k-opc.o): New target.
1544 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1545 * configure: Rebuild.
1547 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1549 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1550 (opcode_bits, opcode_hash_table): New variables.
1551 (opcodes_initialized): Renamed from opcodes_sorted.
1552 (build_hash_table): New function.
1553 (is_delayed_branch): Use hash table.
1554 (print_insn): Renamed from print_insn_sparc, made static.
1555 Build and use hash table. If !sparc64, ignore sparc64 insns,
1556 and vice-versa if sparc64.
1557 (print_insn_sparc, print_insn_sparc64): New functions.
1558 (compare_opcodes): Move sparc64 opcodes to end.
1559 Print commutative insns with constant second.
1560 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1562 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1564 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1565 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1566 avoids printing a delay slot in a delay slot.
1567 * sh-opc.h (sh_table): Fully bracket last entry.
1569 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1571 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1573 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1575 * configure.in: Get host_makefile_frag from ${srcdir}.
1577 * configure.in: Autoconfiscated. Check for string[s].h. Create
1578 config.h from config.in. Don't set up sysdep.h link.
1579 * sysdep.h: New file.
1580 * configure, config.in: New files, generated from configure.in.
1581 * Makefile.in: Updated to be processed autoconf-style.
1582 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1583 (Makefile): Depend on config.status.
1584 (config.status): New rule.
1585 * configure.bat: Update Makefile substitutions.
1587 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1589 * mips-opc.c (L1): Define.
1590 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1591 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1594 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1596 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1597 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1598 have multiple add units but only a single logical unit.
1600 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1601 shifted by 18, without any insertion or extraction function.
1602 (insert_cr, extract_cr): Remove.
1605 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1607 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1610 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1612 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1615 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1617 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1618 * sh-opc.h: Add copyright.
1620 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1622 * Makefile.in (crunch-m68k): Delete extra target accidentally
1623 checked in a while ago.
1625 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1627 * sh-opc.h (sh_table): Add SH3 support.
1629 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1631 * sh-opc.h: Added bsrf and braf.
1633 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1635 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1636 bogus [ls]fm{ea,fd} patterns.
1638 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1639 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1640 initialize it from memory. Make function static.
1641 (print_insn_{big,little}_arm): New functions.
1642 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1643 the correct endianness.
1646 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1648 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1649 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1652 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1654 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1657 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1659 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1660 17th, so that it builds again using GCC as the compiler.
1662 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1664 * mips-dis.c (print_insn_little_mips): Cast return value from
1665 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1666 expects an unsigned long, and that might be fewer words of
1667 argument storage (e.g., if bfd_vma is long long on a 32-bit
1669 (print_insn_big_mips): Likewise with bfd_getb32 value.
1670 (_print_insn_mips): Now static.
1672 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1674 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1675 gcc memory hog problem with initializer is fixed.
1678 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1680 * arc-opc.c (NULL): Define.
1681 (arc_operands, insn fields u,s): Delete.
1682 (arc_operands, insn fields a,b,c): Mark as signed.
1683 (arc_opcodes): No longer const, links computed at run-time.
1684 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1685 suffixes that affect the insn code.
1686 (arc_opcodes): Resort table to macros are first.
1687 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1688 (arc_opcodes, st [b] entry): Likewise.
1689 (arc_opcodes, st [b,d] entry): Fix mask, value.
1690 (arc_reg_names): Add entries for r29, r30, r31, r60.
1691 (opcode_map, icode_map): New static globals.
1692 (arc_opcode_init_tables): Initialize them.
1693 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1694 (insert_shimmoffset): Signal error if register present.
1696 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1699 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1701 Merge in support for Mac MPW as a host.
1702 (Old change descriptions retained for informational value.)
1704 * mpw-config.in (archname): Compute from the config.
1705 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1707 * mpw-config.in (target_arch): Compute from canonical target.
1708 (m68k, mips, powerpc, sparc): Add architectures.
1709 * mpw-make.in (disassemble.c.o): Add.
1710 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1712 * mpw-config.in (BFD_MACHINES): Set to a default value.
1713 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1715 * mpw-make.in (CSEARCH): Add extra-include to search path.
1717 * mpw-config.in (varargs.h): Don't create.
1718 (sysdep.h): Create using forward-include.
1719 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1721 * mpw-config.in: New file, MPW version of configure.in.
1722 * mpw-make.in: New file, MPW version of Makefile.in.
1725 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1727 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1728 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1729 (print_insn_*): Pass bfd mach number, not opcode version.
1730 * arc-opc.c (arc_get_opcode_mach): New function.
1733 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1735 * alpha-dis.c (print_insn_alpha): Put empty statement after
1738 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1740 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1741 (low_sign_extend): Likewise.
1742 (get_field): Delete unused function.
1743 (set_field, deposit_14, deposit_21): Likewise.
1745 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1747 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1750 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1752 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1754 * alpha-opc.h (OSF_ASMCODE): define
1755 print pal-code names as defined in App C of the
1756 Alpha Architecture Reference Manual
1758 * alpha-dis.c: cleaned up output
1759 print stylized code forms as defined in App A.4.3 of the
1760 Alpha Architecture Reference Manual
1762 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1764 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1766 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1769 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1771 * m68k-dis.c (opcode): New function. Returns address of opcode
1772 table entry given index, even if the opcode table was split to
1773 work around gcc bugs.
1774 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1776 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1777 (reg_names): Now const.
1778 (print_insn_arg): Arrays cacheFieldName and names now const.
1779 (print_indexed): Array scales now const.
1782 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1784 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1785 (print_insn_arc_{host,graphics,audio}): Likewise.
1786 (print_insn): Add prototype.
1787 (arc_get_disassembler): New arg `big_p'. Return little or big
1788 print fn accordingly.
1789 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1790 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1791 (arc_opval_supported): Likewise.
1792 * disassemble.c (disassembler): Pass big endian flag to
1793 arc_get_disassembler.
1796 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1798 * ppc-opc.c: Sort recently added instructions by minor opcode
1799 number within major opcode number.
1801 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1803 * hppa-dis.c: Include libhppa.h.
1805 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1807 * mips-opc.c: Change dli to use M_DLI, and add dla.
1809 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1811 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1814 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1816 * arc-dis.c (arc_get_disassembler): Change argument to int,
1817 one of bfd_mach_arc_xxx. All callers updated.
1820 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1822 * mips-opc.c: Add r4650 mul instruction.
1824 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1826 * mips-opc.c: Add uld and usd macros for unaligned double load and
1829 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1831 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1832 mfdcr, mtdcr, icbt, iccci.
1835 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1837 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1838 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1839 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1840 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1841 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1842 (insert_absaddr): New function.
1844 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1846 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1847 New argument `cpu', pass it to arc_opcode_init_tables.
1848 Document byte order dependencies. Ignore unsupported insns.
1849 (arc_get_disassembler): New function.
1850 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1851 print_insn_arc_audio): New functions.
1852 * arc-opc.c (MULTSHIFT operand): Delete.
1853 (UNSIGNED, SATURATION): New operands.
1854 (mac, mul, mul64, mulu64): New insns.
1855 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1856 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1857 (host,graphics,audio extended and auxiliary regs): Define.
1858 (ss, sc, mh, ml): New suffixes.
1859 (arc_opcode_supported, arc_opval_supported): New functions.
1860 (insert_multshift, extract_multshift): Deleted.
1861 * disassemble.c (disassembler, case bfd_arch_arc): Call
1862 arc_get_disassembler to get disassembler routine.
1865 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1867 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1868 signed char fields to shorts, more portable.
1870 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1872 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1873 char fields as signed chars, since they may have negative values.
1875 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1877 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1878 (mycroft@netbsd.org).
1880 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1882 From "Logg, Ed" <elogg@ea.com>:
1883 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1884 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1887 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1889 * ppc-opc.c: Changes based on patch from David Edelsohn
1890 <edelsohn@mhpcc.edu>.
1891 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1894 (insert_tbr): New static function.
1895 (extract_tbr): New static function.
1896 (XFXFXM_MASK, XFXM): Define.
1897 (XSPRBAT_MASK, XSPRG_MASK): Define.
1898 (powerpc_opcodes): Add instructions to access special registers by
1899 name. Add mtcr and mftbu.
1901 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1903 * mips-opc.c (P3): Define.
1904 (mips_opcodes): Add mad and madu.
1906 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1908 * configure.in: Add W65 support.
1909 * disassemble.c: Likewise.
1910 * w65-opc.h, w65-dis.c: New files.
1912 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1914 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1918 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1920 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1922 * arc-opc.c (extract_reladdr): New function.
1923 (insert_reladdr): Store address right-shifted by 2.
1926 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1928 * mips-opc.c: Add dli as a synonym for li.
1931 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1933 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1935 (extraction fns): Insn argument now array of two words. Return pointer
1936 to value's table entry. All uses changed.
1937 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1938 (insert_multshift, extract_multshift): New fns.
1939 (arc_operands): Add support for cache bypass suffix. Add support for
1940 predefined aux regs. Modifier bits moved to flags field.
1941 (arc_opcodes): Likewise.
1942 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1943 New insn rlc. Update to syntax in programmer's manual.
1944 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1945 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1947 (arc_opcode_init_tables): New argument to indicate cpu type.
1948 (insert_reg): Handle predefined aux regs.
1949 (extract_reg): Likewise.
1950 (lookup_register): New fn.
1951 * arc-dis.c (arc_condition_codes): Deleted.
1952 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1953 Clean up modifier handling. Handle predefined aux regs.
1956 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1958 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1959 print something for reserved opcode values, even if it won't
1962 * mips-dis.c (_print_insn_mips): When initializing, shift right
1963 and mask, to avoid sign extension problems on the Alpha.
1965 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1969 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1971 * configure.in: Add ARC support.
1972 * disassemble.c: Likewise.
1973 * arc-dis.c, arc-opc.c: New files.
1976 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1978 * sh-opc.h (mov.l gbr): Get direction right.
1979 * sh-dis.c (print_insn_shx): New function.
1980 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1981 print opcodes with right byte order.
1983 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1985 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1986 to avoid conflicts with getopt.
1988 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1990 * hppa-dis.c (print_insn_hppa): Read the instruction using
1991 bfd_getb32, so that it works on a little endian or 64 bit host.
1992 Remove unused local variable op.
1994 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1996 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1997 addu does not work correctly if -mips3.
1999 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2001 * a29k-dis.c (print_special): Add special register names defined
2002 on 29030, 29040 and 29050.
2003 (print_insn): Handle new operand type 'I'.
2005 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2007 * Makefile.in (INSTALL): Use top level install.sh script.
2009 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2011 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2012 that it works on a little endian host.
2014 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2016 * configure.in: Use ${config_shell} when running config.bfd.
2018 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2020 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2022 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2024 * a29k-dis.c (print_insn): Print the opcode.
2026 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2028 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2030 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2032 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2034 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2036 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2037 which store a value into memory.
2039 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2041 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2042 * arm-dis.c, arm-opc.h: New files.
2044 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2046 * Makefile.in (ns32k-dis.o): Add dependency.
2047 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2048 string, not as array of chars.
2050 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2052 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2054 * sparc-opc.c: Added sparclite extended FP operations, and
2055 versions of v9 impdep* instructions permitting specification of
2058 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2060 * i960-dis.c (reg_names): Now const.
2061 (struct sparse_tabent): New type, copied from array type in mem
2063 (ctrl): Local static array ctrl_tab now const.
2064 (cobr): Local static array cobr_tab now const.
2065 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2066 static variable mem_tab no longer explicitly initialized. Changed
2067 mem_init to const array of struct sparse_tabent.
2068 (reg): Local static variable reg_tab no longer explicitly
2069 initialized. Changed reg_init to const array of struct
2071 (ea): Local static array scale_tab now const.
2073 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2076 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2078 * configure.bat: the disassember needs to be enabled for
2079 "objdump -d" to work in djgpp.
2081 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2083 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2084 (invalid_float): Enabled general version, doesn't require running
2085 on ns32k host. Changed to take char* argument, and test for
2086 explicitly specified sizes, instead of using sizeof() on host CPU
2088 (INVALID_FLOAT): Cast first argument.
2089 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2090 list_P032, list_M032): Now const.
2091 (optlist, list_search): Made appropriate arguments now point to
2093 (print_insn_arg): Changed static array of one-character-string
2094 pointers into a static const array of characters; fixed sprintf
2095 statement accordingly.
2097 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2099 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2100 from distribution. A ns32k-dis.c from a previous distribution has
2101 been brought up to date and supports the new interface.
2103 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2105 * configure.in: add bfd_ns32k_arch target support.
2107 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2108 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2110 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2112 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2115 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2117 * h8300-dis.c, mips-dis.c: Don't use true and false.
2119 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2121 * configure.in: Change --with-targets to --enable-targets.
2123 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2125 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2126 opcodes to the first instruction with that opcode, to speed
2127 disassembly of large files. From ralphc@pyramid.com (Ralph
2130 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2132 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2134 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2136 * configure.bat: update to latest makefile.in
2138 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2140 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2141 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2142 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2143 slot insn is in a delay slot.
2144 * z8k-opc.h: (resflg): Fix patterns.
2145 * h8500-opc.h Fix CR insn patterns.
2147 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2149 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2150 "cmpl" before POWER versions, so that gas -many uses them.
2152 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2154 * disassemble.c: New file.
2155 * Makefile.in (OFILES): Add disassemble.o.
2156 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2157 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2158 binutils/configure.in.
2160 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2161 opcode being examined.
2163 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2165 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2166 (insert_ral, insert_ram, insert_ras): New functions.
2167 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2168 RAS for store with update.
2170 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2172 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2173 (edelsohn@npac.syr.edu).
2175 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2177 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2180 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2182 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2184 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2186 * ppc-opc.c (powerpc_operands): The signedp field has been
2187 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2188 instead. Add new operand SISIGNOPT.
2189 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2190 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2191 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2194 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2196 * i386-dis.c (struct private): Renamed to dis_private. `private'
2197 is a reserved word for dynix cc.
2199 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2201 * configure.in: Change error message to refer to bfd/config.bfd
2202 rather than bfd/configure.in.
2204 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2206 * ppc-opc.c: Define POWER2 as short alias flag.
2207 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2210 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2212 * i960-dis.c (print_insn_i960): Don't read a second word for
2213 opcodes 0, 1, 2 and 3.
2215 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2217 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2219 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2221 * m68881-ext.c: Removed; no longer used.
2222 * Makefile.in: Changed accordingly.
2224 * m68k-dis.c (ext_format_68881): Don't declare.
2225 (print_insn_m68k): If an instruction uses place 'i', it uses at
2226 least four fixed bytes.
2227 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2228 extended float, convert to double using floatformat_to_double, not
2229 ieee_extended_to_double, and fetch the data before converting it.
2231 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2233 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2234 davidj@ICSI.Berkeley.EDU (David Johnson).
2236 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2238 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2239 PowerPC uses bdnz[l][a].
2241 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2243 * dis-buf.c, i386-dis.c: Include sysdep.h.
2245 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2247 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2249 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2250 by Motorola PowerPC 601 with PPC_OPCODE_601.
2251 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2252 Disassemble Motorola PowerPC 601 instructions as well as normal
2253 PowerPC instructions.
2255 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2257 * i960-dis.c (reg, mem): Just use a static array instead of
2260 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2262 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2263 condition name index if this is for a negated condition.
2265 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2266 Floating point format for 'H' operand is backwards from normal
2267 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2268 operands (fmpyadd and fmpysub), handle bizarre register
2269 translation correctly for single precision format.
2271 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2272 or 'I' operands if the next format specifier is 'M' (fcmp
2273 condition completer).
2275 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2277 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2278 single number giving a bitmask for the MB and ME fields of an M
2279 form instruction. Change NB to accept 32, and turn it into 0;
2280 also turn 0 into 32 when disassembling. Seperated SH from NB.
2281 (insert_mbe, extract_mbe): New functions.
2282 (insert_nb, extract_nb): New functions.
2283 (SC_MASK): Mask out SA and LK bits.
2284 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2285 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2286 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2287 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2288 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2289 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2290 (powerpc_macros): Define table of macro definitions.
2291 (powerpc_num_macros): Define.
2293 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2294 if PPC_OPERAND_NEXT is set.
2296 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2298 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2299 char. Retrieve contents using bfd_getl32 instead of shifting.
2301 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2303 * ppc-opc.c: New file. Opcode table for PowerPC, including
2304 opcodes for POWER (RS/6000).
2305 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2306 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2307 (CFILES): Add ppc-dis.c.
2308 (ppc-dis.o, ppc-opc.o): New targets.
2309 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2311 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2313 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2314 No space before 'u', 'f', or 'N'.
2316 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2318 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2319 farther than we should.
2321 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2323 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2325 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2327 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2329 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2330 needs it, to prevent reading past the end of a section.
2332 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2334 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2335 Removed t,A case for la; always use t,A(b) case.
2337 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2339 From Ted Lemen <mellon@pepper.ncd.com>
2340 * mips-dis.c (print_insn_arg): Handle 'k'.
2341 * mips-opc.c: Make cache use k, not t.
2343 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2345 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2346 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2347 FLOAT_FORMAT_CODE to put out floating point register names.
2349 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2351 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2353 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2355 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2357 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2359 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2360 larger than 32. Moved dsxx32 variants first for disassembler.
2362 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2364 * z8kgen.c, z8k-opc.h: Add full lda information.
2366 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2368 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2369 movb instructions. Any necessary space will be emitted by
2370 the code to handle nullification completers.
2372 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2374 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2376 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2378 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2379 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2381 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2383 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2385 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2387 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2388 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2390 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2392 * m88k-dis.c (m88kdis): comment change. Remove space after
2394 (printop): handle new arg types DEC and XREG for m88110.
2396 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2398 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2399 type for absolute branch addresses. Delete special
2400 "ble" and "be" code in 'W' operand code.
2402 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2404 * mips-opc.c: Set hazard information correctly for branch
2405 likely instructions.
2407 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2409 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2410 info->fprintf_func for printing and info->print_address_func for
2413 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2415 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2417 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2419 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2420 Corrected second case of "b" for disassembler.
2422 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2424 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2425 to BFD swapping routines to correspond to BFD name changes.
2427 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2429 * mips-opc.c: Change div machine instruction to be z,s,t rather
2430 than s,t. Change div macro to be d,v,t rather than d,s,t.
2431 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2432 rem and remu which generates only the corresponding div
2433 instruction. This is for compatibility with the MIPS assembler,
2434 which only generates the simple machine instruction when an
2435 explicit destination of $0 is used.
2436 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2438 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2440 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2441 WR_31 hazard for bal, bgezal, bltzal.
2443 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2445 * hppa-dis.c (print_insn_hppa): Use print function
2446 from within the disassemble_info, not fprintf_filtered.
2448 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2450 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2451 Law, law@cs.utah.edu.)
2453 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2455 * mips-opc.c ("absu"): Removed.
2458 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2460 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2461 Changed hazard information to distinguish between memory load
2462 delays and coprocessor load delays.
2464 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2466 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2468 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2470 * configure.in: Don't pass cpu to config.bfd.
2472 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2474 * m88k-dis.c (m88kdis): Make class unsigned.
2476 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2478 * alpha-dis.c (print_insn_alpha): One branch format case was
2479 missing the instruction name.
2481 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2483 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2484 Add the arch-specific auxiliary files.
2485 (OFILES): Remove the arch-specific auxiliary files
2486 and use BFD_MACHINES instead of DIS_LIBS.
2487 * configure.in: Set BFD_MACHINES based on --with-targets option.
2489 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2491 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2494 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2496 * sparc-opc.c: Change CONST to const to deal with gcc
2497 -Dconst=__const -traditional.
2499 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2501 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2502 coprocessor instructions out of #if 0, and made them use new
2505 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2507 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2509 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2511 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2512 instruction, for use by the disassembler.
2514 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2515 hand-coded sign extensions that depended on 32-bit host ints.
2516 FIXME, we still depend on big-endian host bitfield ordering.
2517 (sparc_print_insn): Set the insn_info_valid field, and the
2518 other fields that describe the instruction being printed.
2520 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2522 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2523 `jmp' instead of just one of them.
2525 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2527 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2528 (fput_fp_reg_r): Renamed from fput_reg_r.
2529 (fput_fp_reg): New function.
2530 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2532 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2534 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2536 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2538 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2540 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2541 don't output a space.
2543 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2545 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2547 * mips-opc.c: New file, containing opcode table from
2548 ../include/opcode/mips.h.
2549 * Makefile.in: Add it.
2551 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2553 * m88k-dis.c: New file, moved in from gdb and changed to use the
2554 new dis-asm.h disassembler interface.
2555 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2556 (m88k-dis.o): New target.
2558 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2560 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2561 argument string const char * to correspond to opcode/mips.h.
2563 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2565 * mips-dis.c: Updated to account for name changes in new version
2567 * Makefile.in: Added header file dependencies.
2569 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2571 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2573 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2575 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2576 extend, rather than shifts.
2578 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2580 * Makefile.in: Undo 15 June change.
2582 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2584 * m68k-dis.c (print_insn_arg): Change return value to byte count
2586 * m68k-dis.c: Re-write to detect invalid operands before
2587 printing anything, so we can handle this the same way we
2588 handle invalid opcodes.
2590 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2592 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2594 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2596 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2599 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2601 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2603 * configure.in: Do make sysdep.h link.
2604 * Makefile.in: Search ../include. Don't search ../bfd.
2606 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2608 Changes from Jeff Law, law@cs.utah.edu:
2609 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2610 Do not print a space before the completers specified by
2613 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2615 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2616 defined, since gdb has been fixed.
2618 Changes from Jeff Law, law@cs.utah.edu:
2619 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2620 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2621 be a *disassemble_info, not a *FILE.
2622 * hppa-dis.c: Support 'd', '!', and 'a'.
2623 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2624 * hppa-dis.c: Delete cases which are no longer needed.
2626 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2628 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2630 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2632 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2635 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2637 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2638 * configure.in: No longer need to configure to get sysdep.h.
2640 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2642 * Patches from Jeffrey Law <law@cs.utah.edu>.
2643 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2644 templates for 1.1 FP computational instructions.
2646 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2648 * h8500-dis.c (print_insn_h8500): Address argument is type
2650 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2653 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2654 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2656 * sparc-dis.c (compare_opcodes): Move static declaration to
2659 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2661 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2662 instruction, remove unimp hack from 'l' argument.
2664 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2666 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2669 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2671 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2672 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2675 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2677 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2678 arrays of string pointers to 2-d arrays of chars, to save
2681 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2683 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2684 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2686 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2688 * hppa-dis.c: New file from Utah, adapted to new disassembler
2690 * Makefile.in: Include it.
2692 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2694 * sh-dis.c, sh-opc.h: New files.
2696 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2698 * alpha-dis.c, alpha-opc.h: New files.
2700 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2702 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2705 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2707 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2709 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2711 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2714 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2716 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2717 and double percent signs a few places.
2719 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2721 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2722 Use info->print_address_func not print_address.
2724 * dis-buf.c (generic_print_address): New function.
2726 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2728 * Makefile.in: Add sparc-dis.c.
2729 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2731 Add `add' instruction to the set that get checked
2732 for a preceding `sethi' in order to print an absolute address.
2733 * (print_insn): Disassembly prefers real instructions.
2734 (is_delayed_branch): Speed up.
2735 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2736 Still missing some float ops, and needs testing.
2737 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2738 F_ALIAS. Use printf, not fprintf, when not passing a file
2740 (compare_opcodes): Check that identical instructions have
2741 identical opcodes, complain otherwise.
2744 * Include reg_names.
2746 Use dis-asm.h/read_memory_func interface.
2748 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2750 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2751 deliberately return non-zero to setjmp from longjmp. Otherwise
2752 this code fails to compile.
2754 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2756 * m68k-dis.c: Fix prototype for fetch_arg().
2758 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2760 * dis-buf.c: New file, for new read_memory_func interface.
2761 Makefile.in (OFILES): Include it.
2762 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2763 Use new read_memory_func interface.
2765 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2767 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2768 * h8500-opc.h: Fix couple of opcodes.
2770 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2772 * Makefile.in: add dvi & installcheck targets
2774 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2776 * Makefile.in: Update for h8500-dis.c.
2778 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2780 * h8500-dis.c, h8500-opc.h: New files
2782 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2784 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2785 ../include/dis-asm.h.
2786 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2787 and ../gdb/m68k-pinsn.c).
2788 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2789 and ../gdb/i386-pinsn.c).
2790 * m68881-ext.c: New file. Moved definition of
2791 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2792 * Makefile.in: Adjust for new files.
2793 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2794 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2795 can be dis-assembled.
2797 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2799 * mips-dis.c (print_insn_arg): Now returns void.
2801 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2803 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2804 files that use the macros.
2806 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2808 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2809 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2810 (CFILES): Added mips-dis.c.
2812 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2814 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2815 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2817 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2819 * Makefile.in: Improve *clean rules.
2820 * configure.in: Allow a default host.
2822 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2824 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2825 files include other sysdep files
2827 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2829 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2831 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2833 * configure.in: For host support, use ../bfd/configure.host
2834 so it stays in sync with the ../bfd/hosts database.
2836 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2838 * configure.in: use cpu-vendor-os triple instead of nested cases
2840 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2842 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2843 *always* the wrong one.
2845 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2847 * z8kgen.c: added copyright info
2849 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2851 * z8k-dis.c (unparse_instr): prettier tabs
2852 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2854 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2856 * configure.in: Add ncr* configuration.
2857 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2858 picayune ANSI compilers happy.
2860 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2862 * configure.in (i386): Make i386 and i486 synonymous for now.
2863 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2865 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2867 * Makefile.in (install): Fix typo.
2869 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2871 * Makefile.in (make): Remove obsolete crud.
2872 (sparc-opc.o): Avoid Sun Make VPATH bug.
2874 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2876 * Makefile.in: since there are no SUBDIRS, remove rule and
2877 references of subdir_do.
2879 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2881 * Makefile.in (install): Get the library name right here too.
2882 Don't install bfd.h, since it's unrelated to this library. No
2883 subdirs to recurse into, either.
2884 (CFILES): The source file has a .c suffix, not .o.
2886 * sparc-opc.c: New file, moved from BFD.
2887 * Makefile.in (OFILES): Build it.
2889 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2891 * z8k-dis.c: fixed forward refferences of some declarations.
2893 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2895 * Makefile.in: get the name of the library right
2897 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2899 * z8k-dis.c: knows how to disassemble z8k stuff
2900 * z8k-opc.h: new file full of z8000 opcodes
2904 version-control: never