opcodes/ChangeLog

   1 start-sanitize-r5900
   2 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
   3
   4         * mips-opc.c: Add many missing r5900 instructions.
   5
   6 end-sanitize-r5900
   7 start-sanitize-r5900
   8 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
   9
  10         * d30v-opc.c (d30v_opcode_table): Set new flags bits
  11         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
  12
  13 end-sanitize-r5900
  14 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
  15
  16         * configure: Only build libopcodes shared if --enable-shared's value
  17         was `yes', or was set to `*opcodes*'.
  18         * aclocal.m4: Likewise.
  19         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
  20         original source of this bit of code.  It's not clear what the best fix
  21         would be, though.
  22
  23 start-sanitize-r5900
  24 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
  25
  26         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
  27 end-sanitize-r5900
  28 start-sanitize-tic80
  29 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
  30
  31         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
  32         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
  33         offset forms before the 15 bit forms, to default to the long forms.
  34
  35 end-sanitize-tic80
  36 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
  37
  38         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
  39
  40 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
  41
  42         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
  43         symbol if none is present.
  44         (print_insn_big_arm):  Prevent examination of stored symbol if
  45         none is present.
  46
  47 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
  48
  49         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
  50
  51 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
  52
  53         * disassemble.c: Remove disasm_symaddr() function.
  54
  55         * arm-dis.c: Use info->symbol instead of info->flags to determine
  56         if disassmbly should be in Thumb or Arm mode.
  57
  58 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
  59
  60         * arm-dis.c: Add support for disassembling Thumb opcodes.
  61         (print_insn_thumb): New function.
  62
  63         * disassemble.c (disasm_symaddr): New function.
  64
  65         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
  66         (thumb_opcodes): Table of Thumb opcodes.
  67
  68 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  69
  70         * m68k-opc.c (btst): Change Dd@s to Dd;b.
  71
  72         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
  73         and 'v' as operand types.
  74
  75 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
  76
  77         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
  78         <olivier.carmona@di.epfl.ch>.
  79         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
  80         which has a two word opcode with a one word argument.
  81
  82 start-sanitize-d30v
  83 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
  84
  85         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
  86         unsigned, not signed.
  87         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
  88
  89 end-sanitize-d30v
  90 start-sanitize-sh4
  91 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
  92
  93         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
  94         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
  95         (ftrv): Slay the cut-and-paste monster.
  96
  97 end-sanitize-sh4
  98 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  99
 100         * d10v-dis.c (print_operand):
 101         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
 102
 103 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
 104
 105         * d10v-opc.c (OPERAND_FLAG): Split into:
 106         (OPERAND_FFLAG, OPERAND_CFLAG) .
 107         (FSRC): Split into:
 108         (FFSRC, CFSRC).
 109
 110 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
 111
 112         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
 113         field for all INSN_MACRO's.
 114         * mips16-opc.c: same
 115
 116 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
 117
 118         * mips-opc.c (sync,cache): These are 3900 insns.
 119
 120 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 121
 122         sh-opc.h (sh_table): Remove ftst/nan.
 123
 124 start-sanitize-vr5400
 125 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
 126
 127         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
 128         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
 129         last.
 130         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
 131
 132 end-sanitize-vr5400
 133 start-sanitize-tx49
 134 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
 135
 136         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
 137         Add tx49 insns and configury.
 138
 139 end-sanitize-tx49
 140 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
 141
 142         * mips-opc.c (ffc, ffs): Fix mask.
 143
 144 start-sanitize-d30v
 145 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 146
 147         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 148         control registers.
 149
 150 end-sanitize-d30v
 151 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 152
 153         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 154 start-sanitize-vr5400
 155         Added VR5400 instructions.
 156         (N5): New cpu-id macro.
 157 end-sanitize-vr5400
 158         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 159
 160 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 161
 162         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 163         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 164
 165 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 166
 167         * v850-dis.c (disassemble): Replace // with /* ... */
 168
 169 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 170
 171         * sparc-opc.c: Add wr & rd for v9a asr's.
 172         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 173         (v9a_asr_reg_names): New variable.
 174         Patch from David Miller <davem@vger.rutgers.edu>.
 175
 176 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 177
 178         * sparc-opc.c (v9notv9a): New insn type.
 179         (IMPDEP): Move to the end to not conflict with edge8 et al.
 180         Patch from David Miller <davem@vger.rutgers.edu>.
 181
 182 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 183
 184         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 185
 186 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 187
 188         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 189
 190 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 191
 192         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 193         of disassemble_info structure to determine if an overlay address
 194         has a matching symbol in low memory.
 195
 196         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 197         new symbol_at_address_func field in disassemble_info structure.
 198
 199 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 200
 201         * v850-opc.c (extract_d22): Use signed arithmatic.
 202
 203 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 204
 205         * mips-opc.c: Three op mult is not an ISA insn.
 206
 207 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 208
 209         * mips-opc.c: Fix formatting.
 210
 211 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 212
 213         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 214         than assuming that char is signed.  Explicitly sign extend 16 bit
 215         values, rather than assuming that short is 16 bits.
 216         (OP_sI, OP_J, OP_DIR): Likewise.
 217
 218 start-sanitize-v850e
 219 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 220
 221         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 222         system registers.
 223
 224 end-sanitize-v850e
 225 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 226
 227         * v850-opc.c: Fix typo in comment.
 228
 229         * v850-dis.c (disassemble): Add test of processor type when
 230         determining opcodes.
 231
 232 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 233
 234         * configure.in: Use a diversion to set enable_shared before the
 235         arguments are parsed.
 236         * configure: Rebuild.
 237
 238 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 239
 240         * m68k-opc.c (TBL1): Use ! rather than `.
 241         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 242
 243 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 244
 245         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 246
 247         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 248
 249         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 250         for mcf5200.
 251
 252         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 253         * aclocal.m4: Rebuild with new libtool.
 254         * configure: Rebuild.
 255
 256 start-sanitize-v850e
 257 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 258
 259         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 260
 261 end-sanitize-v850e
 262 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 263
 264         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 265
 266 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 267
 268         * v850-opc.c (v850_opcodes): Further rearrangements.
 269
 270 start-sanitize-d30v
 271 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 272
 273         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 274
 275 end-sanitize-d30v
 276 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 277
 278         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 279         parser to work.
 280
 281 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 282
 283         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 284 start-sanitize-tx19
 285         * mips16-opc.c: Added mips16 sdbbp.
 286 end-sanitize-tx19
 287
 288 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 289
 290         * v850-opc.c: Initialise processors field of v850_opcode structure.
 291
 292 start-sanitize-d30v
 293 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 294
 295         Merge changes from Martin Hunt:
 296
 297         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 298
 299         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 300         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 301         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 302
 303         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 304
 305         * d30v-dis.c (print_insn): First operand of d*i (delayed
 306         branch) instructions is relative.
 307
 308         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 309         (d30v_operand_table): Add IMM6S3 type.
 310         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 311
 312         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 313         and cmp instructions.
 314
 315         * d30v-opc.c: Correct entries for repeat*, and sat*.
 316         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 317         types. Correct several formats.
 318
 319         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 320
 321         * d30v-opc.c (pre_defined_registers): Change control registers.
 322
 323         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 324         SHORT_C2.  Manual was incorrect.
 325
 326         * d30v-dis.c (lookup_opcode):  Return value now indicates
 327         if an opcode has a short and a long form.  Used for deciding
 328         to append a ".s" or ".l".
 329         (print_insn): Append a ".s" to an instruction if it is
 330         the short form and ".l" if it is a long form. Do not append
 331         anything if the instruction has only one possible size.
 332
 333         * d30v-opc.c: Change mulx2h to require an even register.
 334         New form: SHORT_A2; a SHORT_A form that needs an even
 335         register as the first operand.
 336
 337         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 338         instruction was not being disassembled if there were an odd
 339         number of instructions.
 340
 341         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 342
 343 end-sanitize-d30v
 344 start-sanitize-v850e
 345 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 346
 347         * v850-dis.c (disassemble): Improved display of register lists.
 348
 349 end-sanitize-v850e
 350 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 351
 352         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 353         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 354         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 355         fandnot1s, fandnot2s.
 356
 357 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 358
 359         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 360
 361 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 362
 363         * cgen-asm.c (cgen_parse_address): New argument resultp.
 364         All callers updated.
 365         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 366
 367 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 368
 369         * mn10200-dis.c (disassemble): PC relative instructions are
 370         relative to the next instruction, not the current instruction.
 371
 372 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 373
 374         * v850-dis.c (disassemble): Only signed extend values that are not
 375         returned by extract functions.
 376         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 377
 378 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 379
 380         * v850-opc.c: Update comments.  Remove use of
 381         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 382
 383 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 384
 385         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 386
 387 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 388
 389         * configure: Rebuilt with latest devo autoconf for NT support.
 390
 391 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 392
 393         * v850-dis.c (disassemble): Use curly brace syntax for register
 394         lists.
 395
 396         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 397         where r0 is being used as a destination register.
 398
 399 start-sanitize-v850e
 400 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 401
 402         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 403 end-sanitize-v850e
 404
 405 start-sanitize-sh4
 406 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 407
 408         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
 409         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
 410         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
 411         Add insns to access SGR and DBR.
 412         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
 413
 414 end-sanitize-sh4
 415 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 416
 417         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 418
 419 start-sanitize-v850e
 420 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 421
 422         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 423         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 424         opcodes..
 425
 426 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 427
 428         * configure (cgen_files): Add support for v850e target.
 429         * configure.in (cgen_files):  Add support for v850e target.
 430
 431 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 432
 433         * configure (cgen_files): Add support for v850ea target.
 434         * configure.in (cgen_files):  Add support for v850ea target.
 435 end-sanitize-v850e
 436
 437 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 438
 439         * configure.in (bfd_arc_arch): Add.
 440         * configure: Rebuild.
 441         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 442         * Makefile.in: Rebuild.
 443         * arc-dis.c, arc-opc.c: New files.
 444         * disassemble.c (ARCH_all): Define ARCH_arc.
 445         (disassembler): Add ARC support.
 446
 447 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 448
 449 start-sanitize-v850e
 450         * v850-dis.c (disassemble): Add support for v850EA instructions.
 451
 452         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 453         (v850_opcodes): Add v850EA instructions.
 454
 455         * v850-dis.c (disassemble): Add support for v850E instructions.
 456
 457         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 458         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 459         insert_spe, extract_spe): New Functions.
 460         (v850_opcodes): Add v850E instructions.
 461 end-sanitize-v850e
 462
 463         * v850-opc.c: Reorganised and re-layed out to improve readability
 464         and portability.
 465
 466 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 467
 468         * configure: Rebuild with autoconf 2.12.1.
 469
 470 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 471
 472         * aclocal.m4, configure: Rebuild with new automake patches.
 473
 474 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 475
 476         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
 477         * acinclude.m4: Just include acinclude.m4 from BFD.
 478         * aclocal.m4, configure: Rebuild.
 479
 480 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
 481
 482         * Makefile.am: New file, based on old Makefile.in.
 483         * acconfig.h: New file.
 484         * acinclude.m4: New file.
 485         * stamp-h.in: New file.
 486         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
 487         Removed shared library handling; now handled by libtool.  Replace
 488         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
 489         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
 490         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
 491         handling in AC_OUTPUT.
 492         * dep-in.sed: Change .o to .lo.
 493         * Makefile.in: Now built with automake.
 494         * aclocal.m4: Now built with aclocal.
 495         * config.in, configure: Rebuild.
 496
 497 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
 498
 499         * mips-opc.c: Fix typo/thinko in "eret" instruction.
 500
 501 start-sanitize-r5900
 502 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 503
 504         * mips-opc.c: Fix coding of mtsa.
 505
 506 end-sanitize-r5900
 507 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
 508
 509         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
 510         Make array const.
 511         * sparc-dis.c (sorted_opcodes): New static local.
 512         (struct opcode_hash): `opcode' is pointer to const element.
 513         (build_hash): First arg is now table of sorted pointers.
 514         (print_insn_sparc): Sort opcodes by sorting table of pointers.
 515         (compare_opcodes): Update.
 516
 517 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 518
 519         * cgen-opc.c: #include <ctype.h>.
 520         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
 521         Handle case insensitive hashing.
 522         (hash_keyword_value): Change type of `value' to unsigned int.
 523
 524 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
 525
 526         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
 527         precision FP, mark it as such.  Likewise for double precision
 528         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
 529         possible.
 530 start-sanitize-r5900
 531         (mips_builtin_opcodes): Remove non-existant r5900 instructions
 532 end-sanitize-r5900
 533
 534 start-sanitize-r5900
 535 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
 536
 537         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
 538         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
 539
 540 end-sanitize-r5900
 541 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
 542
 543         * ppc-opc.c (extract_nsi): make unsigned expression signed before
 544         negating it.
 545         (UNUSED): remove one level of parens, so MSVC doesn't choke on
 546         nesting depth when all the macros are expanded.
 547
 548 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
 549
 550         * sparc-opc.c: The fcmp v9a instructions take an integer register
 551         as a destination, not a floating point register.  From Christian
 552         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
 553
 554 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
 555
 556         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
 557         syntax.  From Roman Hodek
 558         <rnhodek@faui22c.informatik.uni-erlangen.de>.
 559
 560         * i386-dis.c (twobyte_has_modrm): Fix pand.
 561
 562 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
 563
 564         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
 565
 566 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
 567
 568         * arm-dis.c: Add prototypes for arm_decode_shift and
 569         print_insn_arm.
 570
 571 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
 572
 573         * mips-opc.c: Add r3900 insns.
 574
 575 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 576
 577         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
 578         print delay slot instructions on the same line.  When using a PC
 579         relative load, add a comment with the value being loaded if it can
 580         be obtained.
 581
 582 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
 583
 584         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
 585         to pushS/popS for segment regs and byte constant so that
 586         pushw/popw printed when in 16 bit data mode.
 587
 588         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
 589         print cbtw, cwtd in 16 bit data mode.
 590         * i386-dis.c (putop): extra case W to support above.
 591
 592         * i386-dis.c (print_insn_x86): print addr32 prefix when given
 593         address size prefix in 16 bit address mode.
 594
 595 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
 596
 597         * sh-dis.c: Reindent.  Rename local variable fprintf to
 598         fprintf_fn.
 599
 600 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
 601
 602         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
 603
 604 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
 605
 606         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
 607           field membership.
 608         * mips16-opc.c (mip16_opcodes): same.
 609
 610 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
 611
 612         * m68k-opc.c (moveb): Change $d to %d.
 613
 614 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 615
 616         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
 617         (twobyte_has_modrm): Likewise.
 618         (grps): Likewise.
 619         (OP_MMX, OP_EM, OP_MS): New static functions.
 620
 621         * i386-dis.c: Revert patch of April 4.  The output now matches
 622         what gcc generates.
 623
 624 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
 625
 626         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
 627         of $simm16.
 628
 629 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
 630
 631         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
 632
 633 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 634
 635         * Makefile.in (install): Depend upon installdirs.
 636         (installdirs): New target.
 637
 638 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 639
 640         From Thomas Graichen <graichen@rzpd.de>:
 641         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 642         * configure: Rebuild.
 643
 644 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 645
 646         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 647         Delete string{,s}.h support.
 648
 649 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 650
 651         * cgen-asm.c (cgen_parse_operand_fn): New global.
 652         (cgen_parse_{{,un}signed_integer,address}): Update call to
 653         cgen_parse_operand_fn.
 654         (cgen_init_parse_operand): New function.
 655         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 656         from cgen_asm_init_parse.
 657         (m32r_cgen_assemble_insn): New operand `errmsg'.
 658         Delete call to as_bad, return error message to caller.
 659         (m32r_cgen_asm_hash_keywords): #if 0 out.
 660
 661 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 662
 663         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 664         not data register.
 665         [case 'J']: Fix typo in register name.
 666
 667 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 668
 669         * configure.in: Substitute SHLIB_LIBS.
 670         * configure: Rebuild.
 671         * Makefile.in (SHLIB_LIBS): New variable.
 672         ($(SHLIB)): Use $(SHLIB_LIBS).
 673
 674 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 675
 676         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 677
 678         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 679
 680         * disassemble.c (disassembler): Handle m32r.
 681
 682 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 683
 684         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 685         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 686         * Makefile.in (CFILES): Add them.
 687         (ALL_MACHINES): Add them.
 688         (dependencies): Regenerate.
 689         * configure.in (cgen_files): New variable.
 690         (bfd_m32r_arch): Add entry.
 691         * configure: Regenerate.
 692
 693 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 694
 695         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 696         * configure: Rebuild.
 697
 698         * Makefile.in: Rebuild dependencies.
 699
 700         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 701
 702         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 703         fdivp.
 704
 705 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 706
 707         * Branched binutils 2.8.
 708
 709 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 710
 711         * m10200-dis.c: Rename from mn10200-dis.c.
 712         * m10200-opc.c: Rename from mn10200-opc.c.
 713         * m10300-dis.c: Rename from mn10300-dis.c
 714         * m10300-opc.c: Rename from mn10300-opc.c.
 715         * Makefile.in: Update accordingly.
 716
 717         * mips16-opc.c: Add mul and dmul macros.
 718
 719 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 720
 721         * makefile.vms: Update CFLAGS, add clean target.
 722
 723 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 724
 725         * mips-opc.c: Add "wait".  From Ralf Baechle
 726         <ralf@gnu.ai.mit.edu>.
 727
 728         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 729         * configure, config.in: Rebuild.
 730         * sysdep.h: Include <stdlib.h> if it exists.
 731         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 732         <string.h>.
 733         * Makefile.in: Rebuild dependencies.
 734
 735 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 736
 737         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 738         Andrew Bray <andy@madhouse.demon.co.uk>.
 739
 740         * mips-opc.c: Add cast when setting mips_opcodes.
 741
 742 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 743
 744         * v850-dis.c (disassemble):  Fix sign extension problem.
 745         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 746         disassembly calculate branch offsets correctly.
 747
 748 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 749
 750         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 751
 752         * mips-opc.c: Add dctr and dctw.
 753
 754 start-sanitize-d30v
 755 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 756
 757         * d30v-dis.c (print_insn): Change the way signed constants
 758         are displayed.
 759 end-sanitize-d30v
 760 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 761
 762         * Makefile.in (BFD_H): New variable.
 763         (HFILES): New variable.
 764         (CFILES): Add all C files.
 765         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 766         Delete old dependencies, and build new ones.
 767         * dep-in.sed: New file.
 768
 769 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 770
 771         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 772
 773 start-sanitize-coldfire
 774 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
 775
 776         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
 777         instructions.
 778
 779 end-sanitize-coldfire
 780 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 781
 782         * mn10200-opc.c: Change "trap" to "syscall".
 783         * mn10300-opc.c: Add new "syscall" instruction.
 784
 785 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 786
 787         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 788         mulul insns on the coldfire.
 789
 790 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 791
 792         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 793         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 794         (print_insn_little_arm): Likewise.
 795
 796 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 797
 798         Based on patches from H.J. Lu <hjl@lucon.org>:
 799         * i386-dis.c (fetch_data): Add prototype.
 800         * m68k-dis.c (fetch_data): Add prototype.
 801         (dummy_print_address): Add prototype.  Make static.
 802         * ppc-opc.c (valid_bo): Add prototype.
 803         * sparc-dis.c (build_hash_table): Add prototype.
 804         (is_delayed_branch, compute_arch_mask): Add prototypes.
 805         (print_insn_sparc): Make several local variables const.
 806         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 807         * sparc-opc.c (arg): Change name field to be const.
 808         (lookup_name, lookup_value): Add prototypes.  Change table and
 809         name parameters to be const.
 810         (sparc_encode_asi): Change name parameter to be const.
 811         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 812         (sparc_encode_sparclet_cpreg): Likewise.
 813         (sparc_decode_asi): Change return type to be const.
 814         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 815         (sparc_decode_sparclet_cpreg): Likewise.
 816
 817 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 818
 819         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 820         Solaris doesn't like the combined options, and the -f is
 821         unnecessary.
 822         (stamp-tshlink, install): Likewise.
 823
 824 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 825
 826         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 827         as relaxable.
 828
 829 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 830
 831         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 832
 833 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 834
 835         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 836         the mc68000.
 837
 838 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 839
 840         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 841
 842 start-sanitize-tic80
 843 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 844
 845         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 846
 847 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 848
 849         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 850
 851 end-sanitize-tic80
 852 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 853
 854         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 855         floatformat_to_double to make portable.
 856         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 857         precision float.
 858
 859 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 860
 861         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 862         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 863
 864 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 865
 866         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 867         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 868
 869 start-sanitize-tic80
 870 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 871
 872         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 873         (OFF_SL_BR_SCALED): ... to this, and added the flag
 874         TIC80_OPERAND_BASEREL to the flags word.
 875         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 876         OFF_SL_BR_SCALED.
 877
 878 end-sanitize-tic80
 879 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 880
 881         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 882         Change mips_opcodes from const array to a pointer,
 883         and change bfd_mips_num_opcodes from const int to int,
 884         so that we can increase the size of the mips opcodes table
 885         dynamically.
 886
 887 start-sanitize-tic80
 888 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 889
 890         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 891         store BITNUM values in the table in one's complement form
 892         to match behavior when assembler is given a raw numeric
 893         value for a BITNUM operand.
 894         * tic80-dis.c (print_operand_bitnum): Ditto.
 895
 896 end-sanitize-tic80
 897 start-sanitize-d30v
 898 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 899
 900         * d30v-opc.c: Removed references to FLAG_X.
 901
 902 end-sanitize-d30v
 903 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 904
 905         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 906
 907 start-sanitize-d30v
 908 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 909
 910         * Makefile.in: Added d30v object files.
 911         * configure: (bfd_d30v_arch) Rebuilt.
 912         * configure.in: (bfd_d30v_arch) Added new case.
 913         * d30v-dis.c: New file.
 914         * d30v-opc.c: New file.
 915         * disassemble.c (disassembler) Add entry for d30v.
 916
 917 end-sanitize-d30v
 918 start-sanitize-tic80
 919 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 920
 921         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 922         representations for the floating point BITNUM values.
 923
 924 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 925
 926         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 927         in the table in one's complement form, as they appear in the
 928         actual instruction.
 929         (tic80_symbol_to_value): Use macros to access predefined
 930         symbol fields.
 931         (tic80_value_to_symbol): Ditto.
 932         (tic80_next_predefined_symbol): New function.
 933         * tic80-dis.c (print_operand_bitnum): Remove code that did
 934         one's complement for BITNUM values.
 935
 936 end-sanitize-tic80
 937 start-sanitize-r5900
 938 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
 939
 940         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
 941
 942 end-sanitize-r5900
 943 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 944
 945         * makefile.vms: Remove 8 bit characters.  Update to latest
 946         gcc release.
 947
 948 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 949
 950         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 951
 952 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 953
 954         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 955         (IMM24_PCREL): Likewise.
 956
 957 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 958
 959         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 960         address for an extended PC relative instruction that is not a
 961         branch.
 962
 963 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 964
 965         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 966         bytes_per_line.
 967
 968 start-sanitize-tic80
 969 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 970
 971         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 972         (tic80_opcodes): Sort entries so that long immediate forms
 973         come after short immediate forms, making it easier for
 974         assembler to select the right one for a given operand.
 975
 976 end-sanitize-tic80
 977 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 978
 979         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 980         display_endian.
 981         (print_insn_mips16): Likewise.
 982
 983 start-sanitize-r5900
 984 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 985
 986         * mips-opc.c: add r5900.
 987
 988 end-sanitize-r5900
 989 start-sanitize-tic80
 990 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 991
 992         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
 993         a symbol class that restricts translation to just that
 994         class (general register, condition code, etc).
 995
 996 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
 997
 998         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
 999         and REG_DEST_E for register operands that have to be
1000         an even numbered register.  Add REG_FPA for operands that
1001         are one of the floating point accumulator registers.
1002         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1003         (tic80_opcodes): Change entries that need even numbered
1004         register operands to use the new operand table entries.
1005         Add "or" entries that are identical to "or.tt" entries.
1006
1007 end-sanitize-tic80
1008 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1009
1010         * mips16-opc.c: Add new cases of exit instruction for
1011         disassembler.
1012         * mips-dis.c (print_mips16_insn_arg): Display floating point
1013         registers in operands of exit instruction.  Print `$' before
1014         register names in operands of entry and exit instructions.
1015
1016 start-sanitize-tic80
1017 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
1018
1019         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1020         pairs for all predefined symbols recognized by the assembler.
1021         Also used by the disassembling routines.
1022         (tic80_symbol_to_value): New function.
1023         (tic80_value_to_symbol): New function.
1024         * tic80-dis.c (print_operand_control_register,
1025         print_operand_condition_code, print_operand_bitnum):
1026         Remove private tables and use tic80_value_to_symbol function.
1027
1028 end-sanitize-tic80
1029 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
1030
1031         * d10v-dis.c (print_operand): Change address printing
1032         to correctly handle PC wrapping.  Fixes PR11490.
1033
1034 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
1035
1036         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1037         branches relaxable.
1038
1039 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
1040
1041         * mips-dis.c (print_insn_mips16): Set insn_info information.
1042         (print_mips16_insn_arg): Likewise.
1043
1044         * mips-dis.c (print_insn_mips16): Better handling of an extend
1045         opcode followed by an instruction which can not be extended.
1046
1047 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
1048
1049         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1050         coldfire moveb instruction to not allow an address register as
1051         destination.  Although the documentation does not indicate that
1052         this is invalid, experiments uncovered unexpected behavior.
1053         Added a comment explaining the situation.  Thanks to Andreas
1054         Schwab for pointing this out to me.
1055
1056 start-sanitize-tic80
1057 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
1058
1059         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1060         entries are presorted so that entries with the same mnemonic are
1061         adjacent to each other in the table.  Sort the entries for each
1062         instruction so that this is true.
1063
1064 end-sanitize-tic80
1065 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1066
1067         * m68k-dis.c: Include <libiberty.h>.
1068         (print_insn_m68k): Sort the opcode table on the most significant
1069         nibble of the opcode.
1070
1071 start-sanitize-tic80
1072 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
1073
1074         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1075         "vsub", "vst", "xnor", and "xor" instructions.
1076         (V_a1): Renamed from V_a, msb of accumulator reg number.
1077         (V_a0): Add macro, lsb of accumulator reg number.
1078
1079 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
1080
1081         * tic80-dis.c (print_insn_tic80): Broke excessively long
1082         function up into several smaller ones and arranged for
1083         the instruction printing function to be callable recursively
1084         to print vector instructions that have both a load and a
1085         math instruction packed into a single opcode.
1086         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1087         to explain why it comes after the other vector opcodes.
1088
1089 end-sanitize-tic80
1090 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1091
1092         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1093         move insns to handle immediate operands.
1094
1095 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1096
1097         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1098         fix operand mask in the "moveml" entries for the coldfire.
1099
1100 start-sanitize-tic80
1101 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
1102
1103         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1104         New macros for building vector instruction opcodes.
1105         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1106         FMT_LI, which were unused.  The field is now a flags field.
1107         Remove some opcodes that are possible, but illegal, such
1108         as long immediate instructions with doubles for immediate
1109         values.  Add "vadd" and "vld" instructions.
1110
1111 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
1112
1113         * tic80-opc.c (tic80_operands): Reorder some table entries to make
1114         the order more logical.  Move the shift alias instructions ("rotl",
1115         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1116         interspersed with the regular sr.x and sl.x instructions.  Add
1117         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1118         "sub", "subu", "swcr", and "trap".
1119
1120 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1121
1122         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1123         (OFF_SL_PC): Renamed from OFF_SL.
1124         (OFF_SS_BR): New operand type for base relative operand.
1125         (OFF_SL_BR): New operand type for base relative operand.
1126         (REG_BASE): New operand type for base register operand.
1127         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1128         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1129         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1130         instructions.
1131         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1132         10 char field, padded with spaces on rhs, rather than a string
1133         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1134         than old TIC80_OPERAND_RELATIVE.  Add support for new
1135         TIC80_OPERAND_BASEREL flag bit.
1136
1137 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1138
1139         * tic80-dis.c (print_insn_tic80): Print floating point operands
1140         as floats.
1141         * tic80-opc.c (SPFI): Add single precision floating point
1142         immediate operand type.
1143         (ROTATE): Add rotate operand type for shifts.
1144         (ENDMASK): Add for shifts.
1145         (n): Macro for the 'n' bit.
1146         (i): Macro for the 'i' bit.
1147         (PD): Macro for the 'PD' field.
1148         (P2): Macro for the 'P2' field.
1149         (P1): Macro for the 'P1' field.
1150         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1151         "fcmp", and "fdiv".
1152
1153 end-sanitize-tic80
1154 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1155
1156         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1157         adding in current address for pc-relative operands.
1158
1159 start-sanitize-tic80
1160 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1161
1162         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1163         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1164         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1165         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1166         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1167         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1168         (REG_SCALED, LSI_SCALED): New operand types.
1169         (E): New macro for 'E' bit at bit 27.
1170         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1171         opcodes, including the various size flavors (b,h,w,d) for
1172         the direct load and store instructions.
1173
1174 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1175
1176         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1177         in an instruction.
1178         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1179         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1180         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1181         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1182         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1183         masks with "MASK_* & ~M_*" to get the M bit reset.
1184         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1185
1186 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1187
1188         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1189         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1190         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1191         form.
1192         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1193         CC, SICR, and LICR table entries.
1194         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1195         "bcnd", and "brcr" opcodes.
1196
1197 end-sanitize-tic80
1198 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1199
1200         * ppc-opc.c (powerpc_operands): Make comment match the
1201         actual fields (no shift field).
1202         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1203 start-sanitize-tic80
1204         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1205         partial implementation, work in progress.
1206         * tic80-opc.c (tic80_operands): Begin construction operands table.
1207         (tic80_opcodes): Continue populating opcodes table and start
1208         filling in the operand indices.
1209         (tic80_num_opcodes): Add this.
1210 end-sanitize-tic80
1211
1212 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1213
1214         * m68k-opc.c: Add #B case for moveq.
1215
1216 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1217
1218         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1219         before they are used.
1220
1221 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1222
1223         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1224         for "breakpoint" instruction.
1225
1226 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1227
1228         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1229         (dep): Use ALL_CFLAGS rather than CFLAGS.
1230
1231 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1232
1233         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1234         flag.
1235
1236 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1237
1238         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1239 start-sanitize-tic80
1240         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1241 end-sanitize-tic80
1242
1243 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1244
1245         * mips16-opc.c: Add "abs".
1246
1247 start-sanitize-tic80
1248 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1249
1250         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1251         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1252         (disassembler): Add bfd_arch_tic80 support to set disassemble
1253         to print_insn_tic80.
1254         * tic80-dis.c (print_insn_tic80): Add stub.
1255
1256 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1257
1258         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1259         * configure: Regenerate with autoconf.
1260         * tic80-dis.c: Add file.
1261         * tic80-opc.c: Add file.
1262
1263 end-sanitize-tic80
1264 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1265
1266         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1267
1268 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1269
1270         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1271         (mn10200_opcodes): Use it for some logicals and btst insns.
1272         Add "break" and "trap" instructions.
1273
1274         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1275
1276         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1277
1278 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1279
1280         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1281         relative load or add now depends upon whether the instruction is
1282         in a delay slot.
1283
1284 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1285
1286         * mn10200-dis.c: Finish writing disassembler.
1287         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1288         Fix mask for "jmp (an)".
1289
1290         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1291         handle endianness issues for mn10300.
1292
1293         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1294
1295 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1296
1297         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1298         instruction.  Fix opcode field for "movb (imm24),dn".
1299
1300         * mn10200-opc.c (mn10200_operands): Fix insertion position
1301         for DI operand.
1302
1303 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1304
1305         * mn10200-opc.c: Create mn10200 opcode table.
1306         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1307         but moving along nicely.
1308
1309 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1310
1311         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1312
1313 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1314
1315         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1316         specifiers for fmovem* instructions.
1317
1318 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1319
1320         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1321
1322 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1323
1324         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1325         with dsrl.
1326
1327 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1328
1329         * mn10300-opc.c: Add some comments explaining the various
1330         operands and such.
1331
1332         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1333
1334 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1335
1336         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1337         specifiers.
1338
1339         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1340         operand specifiers in fmovm* instructions.
1341
1342 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1343
1344         * ppc-opc.c (insert_li): Give an error if the offset has the two
1345         least significant bits set.
1346
1347 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1348
1349         * mips-dis.c (print_insn_mips16): Separate the instruction from
1350         the arguments with a tab, not a space.
1351
1352 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1353
1354         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1355         register prefix.
1356
1357         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1358         mov am,(imm32,sp).
1359
1360 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1361
1362         * configure: Rebuild with autoconf 2.12.
1363
1364         Add support for mips16 (16 bit MIPS implementation):
1365         * mips16-opc.c: New file.
1366         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1367         (mips16_reg_names): New static array.
1368         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1369         after seeing a 16 bit symbol.
1370         (print_insn_little_mips): Likewise.
1371         (print_insn_mips16): New static function.
1372         (print_mips16_insn_arg): New static function.
1373         * mips-opc.c: Add jalx instruction.
1374         * Makefile.in (mips16-opc.o): New target.
1375         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1376         * configure: Rebuild.
1377
1378 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1379
1380         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1381         operand specifiers in *save, *restore and movem* instructions.
1382
1383         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1384         the coldfire.
1385
1386         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1387         register operands for immediate arithmetic, not, neg, negx, and
1388         set according to condition instructions.
1389
1390         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1391         specifier of the effective-address operand in immediate forms of
1392         arithmetic instructions.  The specifier for the immediate operand
1393         notes how and where the constant will be stored.
1394
1395 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1396
1397         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1398         opcode.
1399
1400         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1401         register prefix.
1402
1403         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1404
1405 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1406
1407         * mn10300-dis.c (disassemble): Handle register lists.
1408
1409         * mn10300-opc.c: Fix handling of register list operand for
1410         "call", "ret", and "rets" instructions.
1411
1412         * mn10300-dis.c (disassemble): Print PC-relative and memory
1413         addresses symbolically if possible.
1414         * mn10300-opc.c: Distinguish between absolute memory addresses,
1415         pc-relative offsets & random immediates.
1416
1417         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1418         in 7 byte insns.
1419         (disassemble): Handle SPLIT and EXTENDED operands.
1420
1421 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1422
1423         * mn10300-dis.c: Rough cut at printing some operands.
1424
1425         * mn10300-dis.c: Start working on disassembler support.
1426         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1427
1428         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1429         list.
1430         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1431
1432 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1433
1434         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1435
1436 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1437
1438         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1439         register argument is calls and jmp instructions.
1440
1441 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1442
1443         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1444         getx operand.  Fix opcode for mulqu imm,dn.
1445
1446 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1447
1448         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1449         in MN10300_OPERAND_SPLIT operands for how many bits
1450         appear in the basic insn word.  Add IMM32_HIGH24,
1451         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1452         (mn10300_opcodes): Use new operands as needed.
1453
1454         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1455         for bset, bclr, btst instructions.
1456         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1457
1458         * mn10300-opc.c (mn10300_operands): Remove many redundant
1459         operands.  Update opcode table as appropriate.
1460         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1461         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1462
1463 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
1464
1465         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1466         operands (for indexed load/stores).  Fix bitpos for DI
1467         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1468         few instructions that insert immediates/displacements in the
1469         middle of the instruction.  Add IMM8E for 8 bit immediate in
1470         the extended part of an instruction.
1471         (mn10300_operands): Use new opcodes as appropriate.
1472
1473 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1474
1475         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1476         sequential so the assembler never parallelizes it with
1477         other instructions.
1478
1479 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
1480
1481         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1482         a data/address register that appears in register field 0
1483         and register field 1.
1484         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1485
1486 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
1487
1488         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1489         standard disassembly.
1490
1491         * alpha-opc.c (alpha_operands): Rearrange flags slot.
1492         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1493         Recategorize PALcode instructions.
1494
1495 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
1496
1497         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1498
1499 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
1500
1501         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1502         there are no operand types.
1503
1504 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
1505
1506         * v850-opc.c (D9_RELAX): Renamed from D9, all references
1507         changed.
1508         (v850_operands): Make sure D22 immediately follows D9_RELAX.
1509
1510 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
1511
1512         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1513
1514 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
1515
1516         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1517         and sst.w instructions.
1518
1519         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1520         "bCC"instructions).
1521
1522 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1523
1524         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1525         and the arguments.
1526
1527 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1528
1529         * ppc-opc.c (PPCPWR2): Define.
1530         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1531         it.
1532
1533 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1534
1535         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1536         field for movhu instruction.
1537
1538         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1539         cast value to "long" not "signed long" to keep hpux10
1540         compiler quiet.
1541
1542 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1543
1544         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1545         for mov (abs16),DN.
1546
1547         * mn10300-opc.c (FMT*): Remove definitions.
1548
1549         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1550         for shift-by-register opcodes.
1551
1552         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1553         into [AD][MN][01] for encoding the position of the register
1554         in the opcode.
1555
1556 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1557
1558         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1559         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1560
1561 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1562
1563         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1564         Fix various typos.  Add "PAREN" operand.
1565         (MEM, MEM2): Define.
1566         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1567         operands.  Fix several typos.
1568
1569         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1570         changes.
1571
1572 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1573
1574         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1575         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1576         at this time.
1577         (mn10300_opcodes): Break opcode format out into its own field.
1578         Update many operand fields to deal with signed vs unsigned
1579         issues.  Fix one or two typos in the "mov" instruction
1580         opcode, mask and/or operand fields.
1581
1582 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1583
1584         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1585         m68851 wasn't reset.
1586
1587 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1588
1589         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1590         all opcodes.  Very rough cut at operands for all opcodes.
1591
1592         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1593         opcode table.
1594
1595 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1596
1597         * mn10200-opc.c, mn10300-opc.c: New files.
1598         * mn10200-dis.c, mn10300-dis.c: New files.
1599         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1600         * disassemble.c: Break mn10x00 support into 10200 and 10300
1601         support.
1602         * configure.in: Likewise.
1603         * configure: Rebuilt.
1604
1605 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1606
1607         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1608
1609 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1610
1611         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1612         MN10x00 processors.
1613         * disassemble (ARCH_mn10x00): Define.
1614         (disassembler): Handle bfd_arch_mn10x00.
1615         * configure.in: Recognize bfd_mn10x00_arch.
1616         * configure: Rebuilt.
1617
1618 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1619
1620         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1621         accordingly.  Don't declare functions using op_rtn.
1622
1623 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1624
1625         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1626         params to be more standard.
1627         * (disassemble):  Print absolute addresses and symbolic names for
1628         branch and jump targets.
1629         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1630         bit operands.
1631         * (v850_opcodes):  Add breakpoint insn.
1632
1633 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1634
1635         * m68k-opc.c: Move the fmovemx data register cases before the
1636         other cases, so that they get recognized before the data register
1637         does gets treated as a degenerate register list.
1638
1639 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1640
1641         * mips-opc.c: Add a case for "div" and "divu" with two registers
1642         and a destination of $0.
1643
1644 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1645
1646         * mips-dis.c (print_insn_arg): Add prototype.
1647         (_print_insn_mips): Ditto.
1648
1649 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1650
1651         * mips-dis.c (print_insn_arg): Print condition code registers as
1652         $fccN.
1653
1654 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1655
1656         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1657
1658 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1659
1660         * v850-dis.c (disassemble): Make static.  Provide prototype.
1661
1662 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1663
1664         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1665         in range checks.
1666
1667 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1668
1669         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1670         ']' characters into the output stream.
1671         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1672         Add "memop" field to all opcodes (for the disassembler).
1673         Reorder opcodes so that "nop" comes before "mov" and "jr"
1674         comes before "jarl".
1675
1676         * v850-dis.c (print_insn_v850): Fix typo in last change.
1677
1678         * v850-dis.c (print_insn_v850): Properly handle disassembling
1679         a two byte insn at the end of a memory region when the memory
1680         region's size is only two byte aligned.
1681
1682         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1683
1684         * v850-dis.c (v850_reg_names): Define.
1685         (v850_sreg_names, v850_cc_names): Likewise.
1686         (disassemble): Very rough cut at printing operands (unformatted).
1687
1688         * v850-opc.c (BOP_MASK): Fix.
1689         (v850_opcodes): Fix mask for jarl and jr.
1690
1691         * v850-dis.c: New file.  Skeleton for disassembler support.
1692         * Makefile.in Remove v850 references, they're not needed here.
1693         * configure.in: Add v850-dis.o when building v850 toolchains.
1694         * configure: Rebuilt.
1695         * disassemble.c (disassembler): Call v850 disassembler.
1696
1697         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1698         (insert_d8_6, extract_d8_6): New functions.
1699         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1700         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1701         Add D8_6.
1702         (IF4A, IF4B): Use "D7" instead of "D7S".
1703         (IF4C, IF4D): Use "D8_7" instead of "D8".
1704         (IF4E, IF4F): New.  Use "D8_6".
1705         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1706         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1707
1708         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1709         (v850_operands): Change D16 to D16_15, use special insert/extract
1710         routines.  New new D16 that uses the generic insert/extract code.
1711         (IF7A, IF7B): Use D16_15.
1712         (IF7C, IF7D): New.  Use D16.
1713         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1714
1715         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1716         message.  Issue an error if the branch offset is odd.
1717
1718         * v850-opc.c: Add notes about needing special insert/extract
1719         for all the load/store insns, except "ld.b" and "st.b".
1720
1721         * v850-opc.c (insert_d22, extract_d22): New functions.
1722         (v850_operands): Use insert_d22 and extract_d22 for
1723         D22 operands.
1724         (insert_d9): Fix range check.
1725
1726 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1727
1728         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1729         and set bits field to D9 and D22 operands.
1730
1731 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1732
1733         * v850-opc.c (v850_operands): Define SR2 operand.
1734         (v850_opcodes): "ldsr" uses R1,SR2.
1735
1736         * v850-opc.c (v850_opcodes): Fix opcode specs for
1737         sld.w, sst.b, sst.h, sst.w, and nop.
1738
1739 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1740
1741         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1742         end of the opcode table.
1743
1744 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1745
1746         * d10v-opc.c (pre_defined_registers): Added register pairs,
1747         "r0-r1", "r2-r3", etc.
1748
1749 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1750
1751         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1752         Create I16U for an unsigned 16bit mmediate operand.
1753         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1754
1755         * v850-opc.c (v850_operands): Define EP operand.
1756         (IF4A, IF4B, IF4C, IF4D): Use EP.
1757
1758         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1759         with immediate operand, "movhi".  Tweak "ldsr".
1760
1761         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1762         correct.  Get sld.[bhw] and sst.[bhw] closer.
1763
1764         * v850-opc.c (v850_operands): "not" is a two byte insn
1765
1766         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1767
1768         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1769
1770         * v850-opc.c (two): Get order of words correct.
1771
1772         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1773
1774         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1775         register source and destination operands.
1776         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1777
1778         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1779         same thinko in "trap" opcode.
1780
1781         * v850-opc.c (v850_opcodes): Add initializer for size field
1782         on all opcodes.
1783
1784         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1785         Add D8 for 8-bit unsigned field in short load/store insns.
1786         (IF4A, IF4D): These both need two registers.
1787         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1788         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1789         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1790         for "ldsr" and "stsr".
1791         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1792         is unsigned.
1793
1794         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1795         short store word (sst.w).
1796
1797 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1798
1799         * v850-opc.c (v850_operands): Added insert and extract fields,
1800         pointers to functions that handle unusual operand encodings.
1801
1802 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1803
1804         * v850-opc.c (v850_opcodes): Enable "trap".
1805
1806         * v850-opc.c (v850_opcodes): Fix order of displacement
1807         and register for "set1", "clr1", "not1", and "tst1".
1808
1809 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1810
1811         * v850-opc.c (v850_operands): Add "B3" support.
1812         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1813         and "tst1".
1814
1815         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1816
1817         * v850-opc.c: Close unterminated comment.
1818
1819 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1820
1821         * v850-opc.c (v850_operands): Add flags field.
1822         (v850_opcodes): add move opcodes.
1823
1824 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1825
1826         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1827         * configure: (bfd_v850v_arch) Add new case.
1828         * configure.in: (bfd_v850_arch) Add new case.
1829         * v850-opc.c: New file.
1830
1831 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1832
1833         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1834
1835 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1836
1837         * d10v-opc.c: Add additional information to the opcode
1838         table to help determinine which instructions can be done
1839         in parallel.
1840
1841 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1842
1843         * mpw-make.sed: Update editing of include pathnames to be
1844         more general.
1845
1846 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1847
1848         * arm-opc.h: Added "bx" instruction definition.
1849
1850 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1851
1852         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1853
1854 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1855
1856         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1857
1858 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1859
1860         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1861
1862 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1863
1864         * makefile.vms: Update for alpha-opc changes.
1865
1866 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1867
1868         * i386-dis.c (print_insn_i386): Actually return the correct value.
1869         (ONE, OP_ONE): #ifdef out; not used.
1870
1871 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1872
1873         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1874         Changed subi operand type to treat 0 as 16.
1875
1876 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1877
1878         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1879         <rose@netcom.com>.
1880
1881 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1882
1883         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1884         memory transfer instructions. Add new format string entries %h and %s.
1885         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1886         formats %h and %s.
1887
1888 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1889
1890         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1891         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1892
1893 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1894
1895         * alpha-dis.c (print_insn_alpha_osf): Remove.
1896         (print_insn_alpha_vms): Remove.
1897         (print_insn_alpha): Make globally visible.  Chose the register
1898         names based on info->flavour.
1899         * disassemble.c: Always return print_insn_alpha for the alpha.
1900
1901 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1902
1903         * d10v-dis.c (dis_long): Handle unknown opcodes.
1904
1905 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1906
1907         * d10v-opc.c: Changes to support signed and unsigned numbers.
1908         All instructions with the same name that have long and short forms
1909         now end in ".l" or ".s".  Divs added.
1910         * d10v-dis.c: Changes to support signed and unsigned numbers.
1911
1912 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1913
1914         * d10v-dis.c: Change all functions to use info->print_address_func.
1915
1916 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1917
1918         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1919         move ccr/sr insns more strict so that the disassembler only
1920         selects them when the addressing mode is data register.
1921
1922 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1923         * d10v-opc.c (pre_defined_registers):  Declare.
1924         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1925         to pick a better name for the registers.
1926
1927 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1928
1929         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1930         operands for fexpand and fpmerge.  From Christian Kuehnke
1931         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1932
1933 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1934
1935         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1936         print routine.  Take new regnames and cpumask arguments.
1937         Kill the environment variable nonsense.
1938         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1939         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1940         * disassemble.c (disassembler): Test bfd flavour to pick
1941         between OSF and VMS routines.  Default to OSF.
1942
1943 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1944
1945         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1946         * configure: Rebuild.
1947         * Makefile.in (install): Use @INSTALL_SHLIB@.
1948
1949 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1950
1951         * configure: (bfd_d10v_arch) Add new case.
1952         * configure.in: (bfd_d10v_arch) Add new case.
1953         * d10v-dis.c: New file.
1954         * d10v-opc.c: New file.
1955         * disassemble.c (disassembler) Add entry for d10v.
1956
1957 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1958
1959         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1960         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1961
1962 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1963
1964         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1965         distinguish between variants of the instruction set.
1966         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1967         distinguish between variants of the instruction set.
1968
1969 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1970
1971         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1972         the 8086 instruction set.
1973         * i386-dis.c:  General cleanups.  Make most things static.  Add
1974         prototypes.  Get rid of static variables aflags and dflags.  Pass
1975         them as args (to almost everything).
1976
1977 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1978
1979         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1980
1981         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1982
1983         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1984         if the next arg is marked with SRC_IN_DST.  Gross.
1985
1986         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1987         we're looking for and find EXR.
1988
1989         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1990         if we're looking for KBIT and we don't find it.
1991
1992         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1993         for L_3 and L_2.
1994
1995         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1996         3bit immediate operands.
1997
1998 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1999
2000         * Released binutils 2.7.
2001
2002         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
2003         <kkaempf@progis.ac-net.de>.
2004
2005 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2006
2007         * alpha-opc.c: Correct second case of "mov" to use OPRL.
2008
2009 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
2010
2011         * sparc-dis.c (print_insn_sparclite):  New routine to print
2012         sparclite instructions.
2013
2014 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2015
2016         * m68k-opc.c (m68k_opcodes): Add coldfire support.
2017
2018 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
2019
2020         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2021         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2022         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2023
2024 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2025
2026         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2027         Use autoconf-set values.
2028         (docdir, oldincludedir): Removed.
2029         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2030
2031 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
2032
2033         * alpha-opc.c: New file.
2034         * alpha-opc.h: Remove.
2035         * alpha-dis.c: Complete rewrite to use new opcode table.
2036         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2037         * configure: Rebuild with autoconf 2.10.
2038         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2039         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2040         alpha-opc.h.
2041         (alpha-opc.o): New target.
2042
2043 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
2044
2045         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2046         Set imm_added_to_rs1 even if the source and destination register
2047         are not the same.
2048
2049         * sparc-opc.c: Add some two operand forms of the wr instruction.
2050
2051 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
2052
2053         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2054         to just "mode".
2055
2056         * disassemble.c (disassembler): Handle H8/S.
2057         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2058
2059 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
2060
2061         * sparc-opc.c: Add beq/teq as aliases for be/te.
2062
2063         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
2064         <sergei@msil.sps.mot.com>.
2065
2066 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
2067
2068         * makefile.vms: New file.
2069
2070         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2071
2072 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
2073
2074         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2075         regardless of plen.
2076
2077 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
2078
2079         * i386-dis.c (OP_OFF): Call append_prefix.
2080
2081 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2082
2083         * ppc-opc.c (instruction encoding macros): Add explicit casts to
2084         unsigned long to silence a warning from the Solaris PowerPC
2085         compiler.
2086
2087 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
2088
2089         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2090
2091 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
2092
2093         * sparc-dis.c (X_IMM,X_SIMM): New macros.
2094         (X_IMM13): Delete.
2095         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
2096         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2097         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
2098         cpush, cpusha, cpull sparclet insns.
2099
2100 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
2101
2102         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2103
2104 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2105
2106         * sparc-opc.c: Set F_FBR on floating point branch instructions.
2107         Set F_FLOAT on other floating point instructions.
2108
2109 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2110
2111         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2112         registers.
2113         (powerpc_opcodes): Add 860/821 specific SPRs.
2114
2115 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
2116
2117         * configure.in: Permit --enable-shared to specify a list of
2118         directories.  Set and substitute BFD_PICLIST.
2119         * configure: Rebuild.
2120         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
2121         uses.  Set to @BFD_PICLIST@.
2122
2123 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
2124
2125         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2126         not "abs", which may be needed for the absolute in something
2127         like btst #0,@10:8.  Print L_3 immediates separately from other
2128         immediates.  Change ABSMOV reference to ABS8MEM.
2129
2130 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2131
2132         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2133         (current_arch_mask): New static global.
2134         (compute_arch_mask): New static function.
2135         (print_insn_sparc): Delete sparc_v9_p.  New static local
2136         current_mach.  Resort opcode table if current_mach changes.
2137         Generalize "insn not supported" test.
2138         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2139         Delete test for v9/!v9.
2140         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2141         (v6notlet): Define.
2142         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2143         (brfcx): Renamed to FBRX.
2144         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2145         coprocessor mnemonics are not supported on the sparclet).
2146         (condf): Renamed to CONDF.
2147         (SLCBCC2): Delete F_ALIAS flag.
2148
2149 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2150
2151         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2152         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2153
2154 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2155
2156         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2157         that the shared library version number is set correctly.
2158
2159 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2160
2161         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2162         Miles Bader <miles@gnu.ai.mit.edu>.
2163         * configure: Rebuild.
2164
2165 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2166
2167         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2168         malloc.
2169
2170 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2171
2172         * configure: Rebuild with autoconf 2.8.
2173
2174 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2175
2176         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2177         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2178
2179 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2180
2181         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2182         since they appear as targets in Makefile.in.
2183         * configure: Rebuild.
2184
2185 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2186
2187         * mpw-make.sed: Edit out shared library support bits.
2188
2189 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2190
2191         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2192         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2193         (sparc_opcodes): Add sparclet insns.
2194         (sparclet_cpreg_table): New static local.
2195         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2196         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2197
2198 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2199
2200         * i386-dis.c (index16): New static variable.
2201         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2202         other way around.
2203         (OP_indirE): Return result of OP_E.
2204         (OP_E): Check for 16 bit addressing mode, and disassemble
2205         correctly.  Optimised 32 bit case a little.  Don't print
2206         "(base,index,scale)" when sib specifies only an offset.
2207
2208 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2209
2210         * configure.in: Set and substitute SHLIB_DEP.
2211         * configure: Rebuild.
2212         * Makefile.in (SHLIB_DEP): New variable.
2213         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2214         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2215         COMMON_SHLIB, add them to piclist with appropriate modifications.
2216         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2217         here: just use piclist.
2218
2219 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2220
2221         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2222         (print_insn_sparc): Rewrite v9/not-v9 tests.
2223         (compare_opcodes): Likewise.
2224         * sparc-opc.c (MASK_<ARCH>): Define.
2225         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2226         (sparclet,v6notv9): Define.
2227         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2228         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2229
2230 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2231
2232         * configure.in: Call AC_PROG_CC before configure.host.
2233         * configure: Rebuild.
2234
2235         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2236
2237 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2238
2239         * i386-dis.c (onebyte_has_modrm): New static array.
2240         (twobyte_has_modrm): New static array.
2241         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2242
2243 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2244
2245         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2246         $(SHLINK).
2247
2248 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2249
2250         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2251         doesn't conflict.
2252
2253 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2254
2255         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2256         m68010up, not just m68020up | cpu32.
2257
2258         * Makefile.in (SONAME): New variable.
2259         ($(SHLINK)): Make a link to the transformed name, as well.
2260         (stamp-tshlink): New target.
2261         (install): Skip stamp-tshlink during install.
2262
2263 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2264
2265         * configure.in: Call AC_ARG_PROGRAM.
2266         * configure: Rebuild.
2267         * Makefile.in (program_transform_name): New variable.
2268         (install): Transform library name before installing it.
2269
2270 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2271
2272         * i960-dis.c (mem): Add HX dcinva instruction.
2273
2274         Support for building as a shared library, based on patches from
2275         Alan Modra <alan@spri.levels.unisa.edu.au>:
2276         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2277         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2278         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2279         * configure: Rebuild.
2280         * Makefile.in (ALLLIBS): New variable.
2281         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2282         (COMMON_SHLIB, SHLINK): New variables.
2283         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2284         (STAGESTUFF): Remove variable.
2285         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2286         (stamp-piclist, piclist): New targets.
2287         ($(SHLIB), $(SHLINK)): New targets.
2288         ($(OFILES)): Depend upon stamp-picdir.
2289         (disassemble.o): Build twice if PICFLAG is set.
2290         (MOSTLYCLEAN): Add pic/*.o.
2291         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2292         (distclean): Remove pic and stamp-picdir.
2293         (install): Install shared libraries.
2294         (stamp-picdir): New target.
2295
2296 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2297
2298         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2299         Print unknown instruction as "unknown", rather than in hex.
2300
2301 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2302
2303         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2304
2305 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2306
2307         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2308
2309 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2310
2311         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2312         when necessary.  From Ulrich Drepper
2313         <drepper@myware.rz.uni-karlsruhe.de>.
2314
2315 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2316
2317         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2318         sparc_num_opcodes.  Update architecture enum values.
2319         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2320         (sparc_opcode_lookup_arch): New function.
2321         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2322         (sparc_opcodes): Add v9a shutdown insn.
2323
2324 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2325
2326         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2327         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2328         architecture.
2329         (print_insn_sparc64): Deleted.
2330         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2331         print_insn_sparc.
2332
2333         * sparc-opc.c (architecture_pname): Add v9a.
2334
2335 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2336
2337         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2338         incorrectly defined as 0x16 when it should be 0x15.
2339         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2340         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2341         excb (exception barrier) which is defined in the Alpha
2342         Architecture Handbook version 2.
2343         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2344         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2345         disassembled as or, for example.
2346
2347 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2348
2349         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2350         (_print_insn_mips): Change i from int to unsigned int.
2351
2352 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2353
2354         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2355         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2356
2357 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2358
2359         * i386-dis.c: Added Pentium Pro instructions.
2360
2361 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2362
2363         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2364         being for Power2.
2365
2366 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2367
2368         * sh-opc.h (sh_nibble_type): Added REG_B.
2369         (sh_arg_type): Added A_REG_B.
2370         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2371         and stc.l opcodes.
2372         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2373
2374 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2375
2376         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2377
2378 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2379
2380         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2381         F. Guilmette <rfg@monkeys.com>.
2382
2383 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2384
2385         From David Mosberger-Tang  <davidm@azstarnet.com>:
2386         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2387         instruction.
2388
2389 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2390
2391         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2392         (sh_table): Added many SH3 opcodes.
2393         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2394
2395 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2396
2397         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2398         (subco,subco.): Mark this PPC, not PPCCOM.
2399
2400 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2401
2402         * configure: Rebuild with autoconf 2.7.
2403
2404 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2405
2406         * configure: Rebuild with autoconf 2.6.
2407
2408 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2409
2410         * configure.in: Sort list of architectures.  Accept but do nothing
2411         for alliant, convex, pyramid, romp, and tahoe.
2412
2413 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2414
2415         * a29k-dis.c (print_special): Change num to unsigned int.
2416
2417 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2418
2419         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2420         shifting it.
2421
2422 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2423
2424         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2425         * configure: Rebuilt.
2426
2427 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2428
2429         * configure.in: Add case for bfd_i860_arch.
2430         * configure: Rebuild.
2431
2432 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2433
2434         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2435         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2436         (NEXTDOUBLE): Likewise.
2437         (print_insn_m68k): Don't match fmoveml if there is more than one
2438         register in the list.
2439         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2440
2441 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2442
2443         * m68k-opc.c: Use #W rather than #w.
2444         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2445
2446 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2447
2448         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2449         and likewise for all the dbxx opcodes.
2450
2451 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2452
2453         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2454
2455 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2456
2457         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2458         the VR4100 specific instructions to the mips_opcodes structure.
2459
2460 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2461
2462         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2463         ugly Metrowerks bug in CW6, is fixed in CW7.
2464
2465 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2466
2467         * ppc-opc.c (whole file): Add flags for common/any support.
2468
2469 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
2470
2471         * Makefile.in (BISON): Remove macro.
2472         (FLAGS_TO_PASS): Remove BISON.
2473
2474 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
2475
2476         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2477
2478         * m68k-dis.c (print_insn_m68k): Recognize all two-word
2479         instructions that take no args by looking at the match mask.
2480         (print_insn_arg): Always print "%" before register names.
2481         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2482         [case '_']: Don't print "@#" before address.
2483         [case 'J']: Use "%s" as format string, not register name.
2484         [case 'B']: Treat place == 'C' like 'l' and 'L'.
2485
2486 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
2487
2488         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2489         name correctly.
2490
2491 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
2492
2493         From David Mosberger-Tang  <davidm@azstarnet.com>
2494
2495         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2496         (alpha_insn_set): added definitions for VAX floating point
2497         instructions (Unix compilers don't generate these, but handcoded
2498         assembly might still use them).
2499
2500         * alpha-dis.c (print_insn_alpha): added support for disassembling
2501         the miscellaneous instructions in the Alpha instruction set.
2502
2503 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
2504
2505         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2506         no longer create sysdep.h, sed ppc-opc.c to work around a
2507         serious Metrowerks C bug.
2508         * mpw-make.in: Remove.
2509         * mpw-make.sed: New file, used by mpw-configure to edit
2510         Makefile.in into an MPW makefile.
2511
2512 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2513
2514         * Makefile.in (maintainer-clean): New synonym for realclean.
2515
2516 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2517
2518         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2519         which use '0', '1', and '2' instead.  Specify the proper size for
2520         a pmove immediate operand.  Correct the pmovefd patterns to be
2521         moves to a register, not from a register.
2522         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2523
2524 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2525
2526         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2527         %psr, %wim, %tbr as F_NOTV9.
2528
2529 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2530
2531         * Makefile.in (Makefile): Just rebuild Makefile when running
2532         config.status.
2533         (config.h, stamp-h): New targets.
2534         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2535         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2536         rebuilding config.h.
2537         * configure: Rebuild.
2538
2539         * mips-opc.c: Change unaligned loads and stores with "t,A"
2540         operands to use "t,A(b)".
2541
2542 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2543
2544         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2545
2546 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2547
2548         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2549         until 3 instead of until 2.
2550
2551 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2552
2553         * Makefile.in (ALL_CFLAGS): Define.
2554         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2555         (MOSTLYCLEAN): Add config.log.
2556         (distclean): Don't remove config.log.
2557         * configure.in: Substitute HDEFINES.
2558         * configure: Rebuild.
2559
2560 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2561
2562         * sh-opc.h (sh_arg_type): Add F_FR0.
2563         (sh_table, case fmac): Add F_FR0 as first argument.
2564
2565 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2566
2567         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2568
2569 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2570
2571         * sparc-dis.c: Remove all references to NO_V9.
2572
2573 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2574
2575         * aclocal.m4: Just include ../bfd/aclocal.m4.
2576         * configure: Rebuild.
2577
2578 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2579
2580         * sparc-dis.c (X_DISP19): Define.
2581         (print_insn, case 'G'): Use it.
2582         (print_insn, case 'L'): Sign extend displacement.
2583
2584 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2585
2586         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2587         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2588         host_makefile_frag or frags.
2589         * aclocal.m4: New file.
2590         * configure: Rebuild.
2591         * Makefile.in (INSTALL): Set to @INSTALL@.
2592         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2593         (INSTALL_DATA): Set to @INSTALL_DATA@.
2594         (AR): Set to @AR@.
2595         (AR_FLAGS): Set to rc rather than qc.
2596         (CC): Define as @CC@.
2597         (CFLAGS): Set to @CFLAGS@.
2598         (@host_makefile_frag@): Remove.
2599         (config.status): Remove dependency upon @frags@.
2600
2601         * configure.in: ../bfd/config.bfd now just sets shell variables.
2602         Use them rather than looking through target Makefile fragments.
2603         * configure: Rebuild.
2604
2605 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2606
2607         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2608
2609 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2610
2611         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2612         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2613         sparc64 insns.
2614
2615         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2616         (lookup_{name,value}): New functions.
2617         (prefetch_table): New static local.
2618         (sparc_{encode,decode}_prefetch): New functions.
2619         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2620
2621 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2622
2623         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2624         instructions.
2625
2626 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2627
2628         * sh-dis.c: Correct comment on first line of file.
2629
2630 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2631
2632         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2633
2634         * sparc-opc.c (asi, membar): New static locals.
2635         (sparc_{encode,decode}_{asi,membar}): New functions.
2636         (sparc_opcodes, membar insn): Fix.
2637         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2638         Support decoding of membar masks.
2639         (X_MEMBAR): Define.
2640
2641 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2642
2643         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2644
2645 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2646
2647         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2648         and likewise for the other branches.  Add bhs as an alias for bcc,
2649         and likewise for the size variants.  Add dbhs as an alias for
2650         dbcc.
2651
2652 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2653
2654         * sh-opc.h (FP sts instructions): Update to match reality.
2655
2656 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2657
2658         * m68k-dis.c: (fpcr_names): Add % before all register names.
2659         (reg_names): Likewise.
2660         (print_insn_arg): Don't explicitly print % before register names.
2661         Add % before register names in static array names.  In case 'r',
2662         print data registers as `@(Dn)', not `Dn@'.  When printing a
2663         memory address, don't print @# before it.
2664         (print_indexed): Change base_disp and outer_disp from int to
2665         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2666         syntax.  Sign extend 8 byte displacement correctly.
2667         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2668         Change parameter disp from int to bfd_vma.
2669
2670         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2671         for jsr.
2672
2673 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2674
2675         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2676         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2677         * sh-opc.h (sh_arg_type): Add new operand types.
2678         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2679
2680 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2681
2682         * Makefile.in (distclean): Remove generated file config.h.
2683
2684 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2685
2686         * Makefile.in (distclean): Remove generated file config.h.
2687
2688 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2689
2690         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2691         Clean up tables.
2692         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2693         (opcode): Remove.
2694         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2695         rather than numopcodes.  Use m68k_opcodes rather than removed
2696         opcode function.  Don't check F_ALIAS.
2697         (print_insn_arg): Change first parameter to be const char *.
2698         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2699         (m68k-opc.o): New target.
2700         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2701         * configure: Rebuild.
2702
2703 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2704
2705         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2706         (opcode_bits, opcode_hash_table): New variables.
2707         (opcodes_initialized): Renamed from opcodes_sorted.
2708         (build_hash_table): New function.
2709         (is_delayed_branch): Use hash table.
2710         (print_insn): Renamed from print_insn_sparc, made static.
2711         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2712         and vice-versa if sparc64.
2713         (print_insn_sparc, print_insn_sparc64): New functions.
2714         (compare_opcodes): Move sparc64 opcodes to end.
2715         Print commutative insns with constant second.
2716         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2717
2718 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2719
2720         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2721         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2722         avoids printing a delay slot in a delay slot.
2723         * sh-opc.h (sh_table): Fully bracket last entry.
2724
2725 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2726
2727         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2728
2729 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2730
2731         * configure.in: Get host_makefile_frag from ${srcdir}.
2732
2733         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2734         config.h from config.in.  Don't set up sysdep.h link.
2735         * sysdep.h: New file.
2736         * configure, config.in: New files, generated from configure.in.
2737         * Makefile.in: Updated to be processed autoconf-style.
2738         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2739         (Makefile): Depend on config.status.
2740         (config.status): New rule.
2741         * configure.bat: Update Makefile substitutions.
2742
2743 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2744
2745         * mips-opc.c (L1): Define.
2746         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2747         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2748         and wb.
2749
2750 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2751
2752         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2753         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2754         have multiple add units but only a single logical unit.
2755
2756         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2757         shifted by 18, without any insertion or extraction function.
2758         (insert_cr, extract_cr): Remove.
2759
2760 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2761
2762         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2763         register names.
2764
2765 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2766
2767         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2768         * sh-opc.h: Add copyright.
2769
2770 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2771
2772         * Makefile.in (crunch-m68k): Delete extra target accidentally
2773         checked in a while ago.
2774
2775 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2776
2777         * sh-opc.h (sh_table): Add SH3 support.
2778
2779 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2780
2781         * sh-opc.h: Added bsrf and braf.
2782
2783 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2784
2785         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2786         bogus [ls]fm{ea,fd} patterns.
2787
2788         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2789         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2790         initialize it from memory.  Make function static.
2791         (print_insn_{big,little}_arm): New functions.
2792         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2793         the correct endianness.
2794
2795 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2796
2797         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2798         enum list.
2799
2800 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2801
2802         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2803         17th, so that it builds again using GCC as the compiler.
2804
2805 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2806
2807         * mips-dis.c (print_insn_little_mips): Cast return value from
2808         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2809         expects an unsigned long, and that might be fewer words of
2810         argument storage (e.g., if bfd_vma is long long on a 32-bit
2811         machine).
2812         (print_insn_big_mips): Likewise with bfd_getb32 value.
2813         (_print_insn_mips): Now static.
2814
2815 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2816
2817         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2818         gcc memory hog problem with initializer is fixed.
2819
2820 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2821
2822         Merge in support for Mac MPW as a host.
2823         (Old change descriptions retained for informational value.)
2824
2825         * mpw-config.in (archname): Compute from the config.
2826         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2827
2828         * mpw-config.in (target_arch): Compute from canonical target.
2829         (m68k, mips, powerpc, sparc): Add architectures.
2830         * mpw-make.in (disassemble.c.o): Add.
2831         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2832
2833         * mpw-config.in (BFD_MACHINES): Set to a default value.
2834         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2835
2836         * mpw-make.in (CSEARCH): Add extra-include to search path.
2837
2838         * mpw-config.in (varargs.h): Don't create.
2839         (sysdep.h): Create using forward-include.
2840         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2841
2842         * mpw-config.in: New file, MPW version of configure.in.
2843         * mpw-make.in: New file, MPW version of Makefile.in.
2844
2845 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2846
2847         * alpha-dis.c (print_insn_alpha): Put empty statement after
2848         default label.
2849
2850 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2851
2852         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2853         (low_sign_extend): Likewise.
2854         (get_field): Delete unused function.
2855         (set_field, deposit_14, deposit_21): Likewise.
2856
2857 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2858
2859         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2860           (guy@netapp.com).
2861
2862 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2863
2864         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2865
2866         * alpha-opc.h (OSF_ASMCODE): define
2867         print pal-code names as defined in App C of the
2868         Alpha Architecture Reference Manual
2869
2870         * alpha-dis.c: cleaned up output
2871         print stylized code forms as defined in App A.4.3 of the
2872         Alpha Architecture Reference Manual
2873
2874 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2875
2876         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2877         `rfe'.
2878         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2879         'N', and 'M'.
2880
2881 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2882
2883         * m68k-dis.c (opcode): New function.  Returns address of opcode
2884         table entry given index, even if the opcode table was split to
2885         work around gcc bugs.
2886         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2887         directly.
2888         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2889         (reg_names): Now const.
2890         (print_insn_arg): Arrays cacheFieldName and names now const.
2891         (print_indexed): Array scales now const.
2892
2893 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2894
2895         * ppc-opc.c: Sort recently added instructions by minor opcode
2896         number within major opcode number.
2897
2898 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2899
2900         * hppa-dis.c: Include libhppa.h.
2901
2902 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2903
2904         * mips-opc.c: Change dli to use M_DLI, and add dla.
2905
2906 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2907
2908         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2909
2910 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2911
2912         * mips-opc.c: Add r4650 mul instruction.
2913
2914 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2915
2916         * mips-opc.c: Add uld and usd macros for unaligned double load and
2917         store.
2918
2919 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2920
2921         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2922         mfdcr, mtdcr, icbt, iccci.
2923
2924 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2925
2926         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2927         signed char fields to shorts, more portable.
2928
2929 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2930
2931         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2932         char fields as signed chars, since they may have negative values.
2933
2934 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2935
2936         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2937           (mycroft@netbsd.org).
2938
2939 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2940
2941         From "Logg, Ed" <elogg@ea.com>:
2942         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2943         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2944         value.
2945
2946 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2947
2948         * ppc-opc.c: Changes based on patch from David Edelsohn
2949         <edelsohn@mhpcc.edu>.
2950         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2951         SPR.
2952         (FXM_MASK): Define.
2953         (insert_tbr): New static function.
2954         (extract_tbr): New static function.
2955         (XFXFXM_MASK, XFXM): Define.
2956         (XSPRBAT_MASK, XSPRG_MASK): Define.
2957         (powerpc_opcodes): Add instructions to access special registers by
2958         name.  Add mtcr and mftbu.
2959
2960 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2961
2962         * mips-opc.c (P3): Define.
2963         (mips_opcodes): Add mad and madu.
2964
2965 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2966
2967         * configure.in: Add W65 support.
2968         * disassemble.c: Likewise.
2969         * w65-opc.h, w65-dis.c: New files.
2970
2971 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2972
2973         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2974         immediates.
2975
2976 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2977
2978         * mips-opc.c: Add dli as a synonym for li.
2979
2980 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2981
2982         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2983         print something for reserved opcode values, even if it won't
2984         assemble again.
2985
2986         * mips-dis.c (_print_insn_mips): When initializing, shift right
2987         and mask, to avoid sign extension problems on the Alpha.
2988
2989         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2990         control registers.
2991
2992 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2993
2994         * sh-opc.h (mov.l gbr): Get direction right.
2995         * sh-dis.c (print_insn_shx): New function.
2996         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2997         print opcodes with right byte order.
2998
2999 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
3000
3001         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3002         to avoid conflicts with getopt.
3003
3004 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3005
3006         * hppa-dis.c (print_insn_hppa): Read the instruction using
3007         bfd_getb32, so that it works on a little endian or 64 bit host.
3008         Remove unused local variable op.
3009
3010 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3011
3012         * mips-opc.c: Use or instead of addu for pseudo-op move, since
3013         addu does not work correctly if -mips3.
3014
3015 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3016
3017         * a29k-dis.c (print_special): Add special register names defined
3018         on 29030, 29040 and 29050.
3019         (print_insn): Handle new operand type 'I'.
3020
3021 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3022
3023         * Makefile.in (INSTALL): Use top level install.sh script.
3024
3025 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3026
3027         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3028         that it works on a little endian host.
3029
3030 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
3031
3032         * configure.in: Use ${config_shell} when running config.bfd.
3033
3034 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3035
3036         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3037
3038 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3039
3040         * a29k-dis.c (print_insn): Print the opcode.
3041
3042 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3043
3044         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3045
3046 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
3047
3048         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3049
3050 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3051
3052         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3053         which store a value into memory.
3054
3055 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3056
3057         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3058         * arm-dis.c, arm-opc.h: New files.
3059
3060 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
3061
3062         * Makefile.in (ns32k-dis.o): Add dependency.
3063         * ns32k-dis.c (print_insn_arg): Declare initialized local as
3064         string, not as array of chars.
3065
3066 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3067
3068         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3069
3070         * sparc-opc.c: Added sparclite extended FP operations, and
3071         versions of v9 impdep* instructions permitting specification of
3072         the OPF field.
3073
3074 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3075
3076         * i960-dis.c (reg_names): Now const.
3077         (struct sparse_tabent): New type, copied from array type in mem
3078         function.
3079         (ctrl): Local static array ctrl_tab now const.
3080         (cobr): Local static array cobr_tab now const.
3081         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
3082         static variable mem_tab no longer explicitly initialized.  Changed
3083         mem_init to const array of struct sparse_tabent.
3084         (reg): Local static variable reg_tab no longer explicitly
3085         initialized.  Changed reg_init to const array of struct
3086         sparse_tabent.
3087         (ea): Local static array scale_tab now const.
3088
3089         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3090         (REG_MAX): Updated.
3091
3092 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
3093
3094         * configure.bat: the disassember needs to be enabled for
3095         "objdump -d" to work in djgpp.
3096
3097 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3098
3099         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3100         (invalid_float): Enabled general version, doesn't require running
3101         on ns32k host.  Changed to take char* argument, and test for
3102         explicitly specified sizes, instead of using sizeof() on host CPU
3103         types.
3104         (INVALID_FLOAT): Cast first argument.
3105         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3106         list_P032, list_M032): Now const.
3107         (optlist, list_search): Made appropriate arguments now point to
3108         const.
3109         (print_insn_arg): Changed static array of one-character-string
3110         pointers into a static const array of characters; fixed sprintf
3111         statement accordingly.
3112
3113 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
3114
3115         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
3116         from distribution. A ns32k-dis.c from a previous distribution has
3117         been brought up to date and supports the new interface.
3118
3119         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3120
3121         * configure.in: add bfd_ns32k_arch target support.
3122
3123         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3124         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3125
3126 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
3127
3128         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3129         disassembly right.
3130
3131 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3132
3133         * h8300-dis.c, mips-dis.c: Don't use true and false.
3134
3135 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3136
3137         * configure.in: Change --with-targets to --enable-targets.
3138
3139 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3140
3141         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3142         opcodes to the first instruction with that opcode, to speed
3143         disassembly of large files.  From ralphc@pyramid.com (Ralph
3144         Campbell).
3145
3146 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3147
3148         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3149
3150 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3151
3152         * configure.bat: update to latest makefile.in
3153
3154 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3155
3156         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3157         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3158         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3159         slot insn is in a delay slot.
3160         * z8k-opc.h: (resflg): Fix patterns.
3161         * h8500-opc.h Fix CR insn patterns.
3162
3163 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3164
3165         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3166         "cmpl" before POWER versions, so that gas -many uses them.
3167
3168 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3169
3170         * disassemble.c: New file.
3171         * Makefile.in (OFILES): Add disassemble.o.
3172         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3173         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3174         binutils/configure.in.
3175
3176         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3177         opcode being examined.
3178
3179 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3180
3181         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3182         (insert_ral, insert_ram, insert_ras): New functions.
3183         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3184         RAS for store with update.
3185
3186 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3187
3188         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3189         (edelsohn@npac.syr.edu).
3190
3191 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3192
3193         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3194         immediate argument.
3195
3196 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3197
3198         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3199
3200 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3201
3202         * ppc-opc.c (powerpc_operands): The signedp field has been
3203         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3204         instead.  Add new operand SISIGNOPT.
3205         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3206         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3207         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3208         than signedp field.
3209
3210 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3211
3212         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3213         is a reserved word for dynix cc.
3214
3215 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3216
3217         * configure.in: Change error message to refer to bfd/config.bfd
3218         rather than bfd/configure.in.
3219
3220 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3221
3222         * ppc-opc.c: Define POWER2 as short alias flag.
3223         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3224         fsqrt.
3225
3226 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3227
3228         * i960-dis.c (print_insn_i960): Don't read a second word for
3229         opcodes 0, 1, 2 and 3.
3230
3231 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3232
3233         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3234
3235 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3236
3237         * m68881-ext.c: Removed; no longer used.
3238         * Makefile.in: Changed accordingly.
3239
3240         * m68k-dis.c (ext_format_68881): Don't declare.
3241         (print_insn_m68k): If an instruction uses place 'i', it uses at
3242         least four fixed bytes.
3243         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3244         extended float, convert to double using floatformat_to_double, not
3245         ieee_extended_to_double, and fetch the data before converting it.
3246
3247 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3248
3249         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3250         davidj@ICSI.Berkeley.EDU (David Johnson).
3251
3252 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3253
3254         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3255         PowerPC uses bdnz[l][a].
3256
3257 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3258
3259         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3260
3261 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3262
3263         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3264
3265         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3266         by Motorola PowerPC 601 with PPC_OPCODE_601.
3267         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3268         Disassemble Motorola PowerPC 601 instructions as well as normal
3269         PowerPC instructions.
3270
3271 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3272
3273         * i960-dis.c (reg, mem): Just use a static array instead of
3274         calling xmalloc.
3275
3276 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3277
3278         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3279         condition name index if this is for a negated condition.
3280
3281         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3282         Floating point format for 'H' operand is backwards from normal
3283         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3284         operands (fmpyadd and fmpysub), handle bizarre register
3285         translation correctly for single precision format.
3286
3287         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3288         or 'I' operands if the next format specifier is 'M' (fcmp
3289         condition completer).
3290
3291 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3292
3293         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3294         single number giving a bitmask for the MB and ME fields of an M
3295         form instruction.  Change NB to accept 32, and turn it into 0;
3296         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3297         (insert_mbe, extract_mbe): New functions.
3298         (insert_nb, extract_nb): New functions.
3299         (SC_MASK): Mask out SA and LK bits.
3300         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3301         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3302         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3303         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3304         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3305         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3306         (powerpc_macros): Define table of macro definitions.
3307         (powerpc_num_macros): Define.
3308
3309         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3310         if PPC_OPERAND_NEXT is set.
3311
3312 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3313
3314         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3315         char.  Retrieve contents using bfd_getl32 instead of shifting.
3316
3317 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3318
3319         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3320         opcodes for POWER (RS/6000).
3321         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3322         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3323         (CFILES): Add ppc-dis.c.
3324         (ppc-dis.o, ppc-opc.o): New targets.
3325         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3326
3327 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3328
3329         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3330         No space before 'u', 'f', or 'N'.
3331
3332 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3333
3334         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3335         farther than we should.
3336
3337         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3338
3339 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3340
3341         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3342
3343 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3344
3345         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3346         needs it, to prevent reading past the end of a section.
3347
3348 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3349
3350         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3351         Removed t,A case for la; always use t,A(b) case.
3352
3353 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3354
3355         From Ted Lemen <mellon@pepper.ncd.com>
3356         * mips-dis.c (print_insn_arg): Handle 'k'.
3357         * mips-opc.c: Make cache use k, not t.
3358
3359 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3360
3361         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3362         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3363         FLOAT_FORMAT_CODE to put out floating point register names.
3364
3365 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3366
3367         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3368
3369 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3370
3371         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3372
3373 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3374
3375         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3376         larger than 32.  Moved dsxx32 variants first for disassembler.
3377
3378 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3379
3380         * z8kgen.c, z8k-opc.h: Add full lda information.
3381
3382 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3383
3384         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3385         movb instructions.  Any necessary space will be emitted by
3386         the code to handle nullification completers.
3387
3388 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3389
3390         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3391
3392 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3393
3394         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3395         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3396
3397 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3398
3399         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3400
3401 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3402
3403         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3404         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3405
3406 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3407
3408         * m88k-dis.c (m88kdis): comment change.  Remove space after
3409           printing mnemonic.
3410           (printop): handle new arg types DEC and XREG for m88110.
3411
3412 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3413
3414         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3415         type for absolute branch addresses.  Delete special
3416         "ble" and "be" code in 'W' operand code.
3417
3418 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3419
3420         * mips-opc.c: Set hazard information correctly for branch
3421         likely instructions.
3422
3423 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3424
3425         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3426         info->fprintf_func for printing and info->print_address_func for
3427         address output.
3428
3429 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3430
3431         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3432
3433 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3434
3435         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3436         Corrected second case of "b" for disassembler.
3437
3438 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3439
3440         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3441         to BFD swapping routines to correspond to BFD name changes.
3442
3443 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3444
3445         * mips-opc.c: Change div machine instruction to be z,s,t rather
3446         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3447         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3448         rem and remu which generates only the corresponding div
3449         instruction.  This is for compatibility with the MIPS assembler,
3450         which only generates the simple machine instruction when an
3451         explicit destination of $0 is used.
3452         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3453
3454 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3455
3456         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3457         WR_31 hazard for bal, bgezal, bltzal.
3458
3459 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3460
3461         * hppa-dis.c (print_insn_hppa): Use print function
3462         from within the disassemble_info, not fprintf_filtered.
3463
3464 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3465
3466         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3467         Law, law@cs.utah.edu.)
3468
3469 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3470
3471         * mips-opc.c ("absu"): Removed.
3472         ("dabs"): Added.
3473
3474 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3475
3476         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3477         Changed hazard information to distinguish between memory load
3478         delays and coprocessor load delays.
3479
3480 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3481
3482         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3483
3484 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3485
3486         * configure.in: Don't pass cpu to config.bfd.
3487
3488 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3489
3490         * m88k-dis.c (m88kdis): Make class unsigned.
3491
3492 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3493
3494         * alpha-dis.c (print_insn_alpha): One branch format case was
3495         missing the instruction name.
3496
3497 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3498
3499         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3500         Add the arch-specific auxiliary files.
3501         (OFILES): Remove the arch-specific auxiliary files
3502         and use BFD_MACHINES instead of DIS_LIBS.
3503         * configure.in: Set BFD_MACHINES based on --with-targets option.
3504
3505 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3506
3507         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3508         for swc1.
3509
3510 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3511
3512         * sparc-opc.c: Change CONST to const to deal with gcc
3513         -Dconst=__const -traditional.
3514
3515 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3516
3517         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3518         coprocessor instructions out of #if 0, and made them use new
3519         argument type "C".
3520
3521 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3522
3523         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3524
3525 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3526
3527         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3528         instruction, for use by the disassembler.
3529
3530         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3531         hand-coded sign extensions that depended on 32-bit host ints.
3532         FIXME, we still depend on big-endian host bitfield ordering.
3533         (sparc_print_insn):  Set the insn_info_valid field, and the
3534         other fields that describe the instruction being printed.
3535
3536 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3537
3538         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3539         `jmp' instead of just one of them.
3540
3541 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3542
3543         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3544         (fput_fp_reg_r): Renamed from fput_reg_r.
3545         (fput_fp_reg): New function.
3546         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3547
3548         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3549
3550         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3551
3552 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3553
3554         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3555
3556         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3557         don't output a space.
3558
3559         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3560
3561 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3562
3563         * mips-opc.c: New file, containing opcode table from
3564         ../include/opcode/mips.h.
3565         * Makefile.in: Add it.
3566
3567 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3568
3569         * m88k-dis.c: New file, moved in from gdb and changed to use the
3570         new dis-asm.h disassembler interface.
3571         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3572         (m88k-dis.o): New target.
3573
3574 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3575
3576         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3577         argument string const char * to correspond to opcode/mips.h.
3578
3579 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3580
3581         * mips-dis.c: Updated to account for name changes in new version
3582         of opcode/mips.h.
3583         * Makefile.in: Added header file dependencies.
3584
3585 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3586
3587         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3588
3589 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3590
3591         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3592         extend, rather than shifts.
3593
3594 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3595
3596         * Makefile.in: Undo 15 June change.
3597
3598 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3599
3600         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3601         or error code.
3602         * m68k-dis.c:  Re-write to detect invalid operands before
3603         printing anything, so we can handle this the same way we
3604         handle invalid opcodes.
3605
3606 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3607
3608         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3609
3610 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3611
3612         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3613         header files.
3614
3615 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3616
3617         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3618
3619         * configure.in: Do make sysdep.h link.
3620         * Makefile.in: Search ../include.  Don't search ../bfd.
3621
3622 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3623
3624         Changes from Jeff Law, law@cs.utah.edu:
3625         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3626         Do not print a space before the completers specified by
3627         'a' and 'd'.
3628
3629 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3630
3631         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3632         defined, since gdb has been fixed.
3633
3634         Changes from Jeff Law, law@cs.utah.edu:
3635         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3636         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3637         be a *disassemble_info, not a *FILE.
3638         * hppa-dis.c: Support 'd', '!', and 'a'.
3639         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3640         * hppa-dis.c: Delete cases which are no longer needed.
3641
3642 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3643
3644         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3645
3646 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3647
3648         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3649         H8/300-H opcodes.
3650
3651 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3652
3653         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3654         * configure.in:  No longer need to configure to get sysdep.h.
3655
3656 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3657
3658         * Patches from Jeffrey Law <law@cs.utah.edu>.
3659         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3660         templates for 1.1 FP computational instructions.
3661
3662 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3663
3664         * h8500-dis.c (print_insn_h8500): Address argument is type
3665         bfd_vma.
3666         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3667         Ditto.
3668
3669         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3670         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3671
3672         * sparc-dis.c (compare_opcodes): Move static declaration to
3673         top-level.
3674
3675 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3676
3677         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3678         instruction, remove unimp hack from 'l' argument.
3679
3680 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3681
3682         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3683         happy.
3684
3685 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3686
3687         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3688         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3689         instructions.
3690
3691 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3692
3693         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3694         arrays of string pointers to 2-d arrays of chars, to save
3695         space.
3696
3697 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3698
3699         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3700         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3701
3702 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3703
3704         * hppa-dis.c: New file from Utah, adapted to new disassembler
3705         calling interface.
3706         * Makefile.in: Include it.
3707
3708 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3709
3710         * sh-dis.c, sh-opc.h: New files.
3711
3712 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3713
3714         * alpha-dis.c, alpha-opc.h: New files.
3715
3716 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3717
3718         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3719         value.
3720
3721 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3722
3723         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3724
3725 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3726
3727         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3728         const.
3729
3730 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3731
3732         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3733         and double percent signs a few places.
3734
3735         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3736
3737         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3738         Use info->print_address_func not print_address.
3739
3740         * dis-buf.c (generic_print_address): New function.
3741
3742 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3743
3744         * Makefile.in: Add sparc-dis.c.
3745         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3746         From GDB:
3747             Add `add' instruction to the set that get checked
3748             for a preceding `sethi' in order to print an absolute address.
3749             * (print_insn):  Disassembly prefers real instructions.
3750             (is_delayed_branch):  Speed up.
3751             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
3752             Still missing some float ops, and needs testing.
3753             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3754             F_ALIAS.  Use printf, not fprintf, when not passing a file
3755             pointer...
3756             (compare_opcodes): Check that identical instructions have
3757             identical opcodes, complain otherwise.
3758         From binutils:
3759             * New 'm' arg.
3760             * Include reg_names.
3761         From neither:
3762             Use dis-asm.h/read_memory_func interface.
3763
3764 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3765
3766         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3767           deliberately return non-zero to setjmp from longjmp.  Otherwise
3768           this code fails to compile.
3769
3770 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3771
3772         * m68k-dis.c:  Fix prototype for fetch_arg().
3773
3774 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3775
3776         * dis-buf.c: New file, for new read_memory_func interface.
3777         Makefile.in (OFILES): Include it.
3778         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3779         Use new read_memory_func interface.
3780
3781 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3782
3783         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3784         * h8500-opc.h: Fix couple of opcodes.
3785
3786 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3787
3788         * Makefile.in: add dvi & installcheck targets
3789
3790 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3791
3792         * Makefile.in:  Update for h8500-dis.c.
3793
3794 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3795
3796         * h8500-dis.c, h8500-opc.h: New files
3797
3798 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3799
3800         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3801         ../include/dis-asm.h.
3802         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3803         and ../gdb/m68k-pinsn.c).
3804         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3805         and ../gdb/i386-pinsn.c).
3806         * m68881-ext.c:  New file.  Moved definition of
3807         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3808         * Makefile.in:  Adjust for new files.
3809         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3810         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3811         can be dis-assembled.
3812
3813 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3814
3815         * mips-dis.c (print_insn_arg): Now returns void.
3816
3817 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3818
3819         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3820         files that use the macros.
3821
3822 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3823
3824         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3825         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3826         (CFILES): Added mips-dis.c.
3827
3828 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3829
3830         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3831         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3832
3833 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3834
3835         * Makefile.in:  Improve *clean rules.
3836         * configure.in:  Allow a default host.
3837
3838 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3839
3840         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3841         files include other sysdep files
3842
3843 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3844
3845         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3846
3847 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3848
3849         * configure.in:  For host support, use ../bfd/configure.host
3850         so it stays in sync with the ../bfd/hosts database.
3851
3852 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3853
3854         * configure.in: use cpu-vendor-os triple instead of nested cases
3855
3856 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3857
3858         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3859         *always* the wrong one.
3860
3861 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3862
3863         * z8kgen.c: added copyright info
3864
3865 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3866
3867         * z8k-dis.c (unparse_instr): prettier tabs
3868         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3869
3870 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3871
3872         * configure.in:  Add ncr* configuration.
3873         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3874         picayune ANSI compilers happy.
3875
3876 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3877
3878         * configure.in (i386):  Make i386 and i486 synonymous for now.
3879         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3880
3881 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3882
3883         * Makefile.in (install): Fix typo.
3884
3885 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3886
3887         * Makefile.in (make):  Remove obsolete crud.
3888         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3889
3890 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3891
3892         * Makefile.in: since there are no SUBDIRS, remove rule and
3893         references of subdir_do.
3894
3895 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3896
3897         * Makefile.in (install): Get the library name right here too.
3898         Don't install bfd.h, since it's unrelated to this library.  No
3899         subdirs to recurse into, either.
3900         (CFILES): The source file has a .c suffix, not .o.
3901
3902         * sparc-opc.c: New file, moved from BFD.
3903         * Makefile.in (OFILES): Build it.
3904
3905 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3906
3907         * z8k-dis.c: fixed forward refferences of some declarations.
3908
3909 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3910
3911         * Makefile.in: get the name of the library right
3912
3913 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3914
3915         * z8k-dis.c: knows how to disassemble z8k stuff
3916         * z8k-opc.h: new file full of z8000 opcodes
3917
3918 \f
3919 Local Variables:
3920 version-control: never
3921 End: