1 2000-01-27 Nick Clifton <nickc@redhat.com>
3 * disassemble.c (disassembler_usage): New function: Print out any
4 target specific disassembler options.
5 Call arm_disassembler_options() if the ARM architecture is being
8 * arm-dis.c (NUM_ELEM): Define this macro if not already
10 (arm_regname): New struct type for ARM register names.
11 (arm_toggle_regnames): Delete.
12 (parse_disassembler_option): Use register name structure.
13 (print_insn): New function: Combines duplicate code found in
14 print_insn_big_arm and print_insn_little_arm.
15 (print_insn_big_arm): Call print_insn.
16 (print_insn_little_arm): Call print_insn.
17 (print_arm_disassembler_options): Display list of supported,
18 ARM specific disassembler options.
20 2000-01-27 Thomas de Lellis <tdel@windriver.com>
22 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
23 ARM_STT_16BIT flag as Thumb code symbols.
25 * arm-dis.c (printf_insn_little_arm): Ditto.
27 2000-01-25 Thomas de Lellis <tdel@windriver.com>
29 * arm-dis.c (printf_insn_thumb): Prevent double dumping
30 of raw thumb instructions.
32 2000-01-20 Nick Clifton <nickc@cygnus.com>
34 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
36 2000-01-03 Nick Clifton <nickc@cygnus.com>
38 * arm-dis.c (streq): New macro.
40 (force_thumb): ew local variable.
41 (parse_disassembler_option): New function: Parse a single, ARM
42 specific disassembler command line switch.
43 (parse_disassembler_option): Call parse_disassembler_option to
44 parse individual command line switches.
45 (print_insn_big_arm): Check force_thumb.
46 (print_insn_little_arm): Check force_thumb.
48 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
50 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
52 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
54 * m10300-opc.c, m10300-dis.c: Add am33 support.
56 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
58 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
59 (print_insn_hppa): Handle 'B' operand.
61 1999-11-22 Nick Clifton <nickc@cygnus.com>
63 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
65 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
67 * mips-opc.c (I5): New.
68 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
69 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
70 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
72 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
74 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
75 * arm-opc.h (print_insn_arm): Added comment documenting
76 the 'X' format just added to arm-dis.c.
78 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
80 * mips-opc.c (la): Create a version that just uses addiu directly.
81 (dla): Expand to daddiu if possible.
83 1999-11-11 Nick Clifton <nickc@cygnus.com>
85 * mips-opc.c: Add ssnop pattern.
87 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
89 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
91 1999-10-29 Nick Clifton <nickc@cygnus.com>
93 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
94 (d30v_format_tab): Define the SHORT_AR format.
96 1999-10-28 Nick Clifton <nickc@cygnus.com>
98 * mcore-dis.c: Remove spurious code introduced in previous delta.
100 1999-10-27 Scott Bambrough <scottb@netwinder.org>
102 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
104 1999-10-18 Michael Meissner <meissner@cygnus.com>
106 * alpha-opc.c (alpha_operands): Fill in missing initializer.
107 (alpha_num_operands): Convert to unsigned.
108 (alpha_num_opcodes): Ditto.
109 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
114 (extract_bdisp): Ditto.
115 (extract_jhint): Ditto.
116 (extract_ev6hwjhint): Ditto.
118 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
120 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
123 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
125 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
127 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
129 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
130 rac/rachi instructions.
131 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
134 1999-10-04 Doug Evans <devans@casey.cygnus.com>
136 * fr30-asm.c,fr30-desc.h: Rebuild.
137 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
138 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
140 1999-09-29 Nick Clifton <nickc@cygnus.com>
142 * sh-opc.h: Fix bit patterns for several load and store
145 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
147 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
148 cleaner code using completer prefixes. Add 'Y'.
150 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
152 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
154 * hppa-dis.c (extract_22): New function.
156 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
158 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
160 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
162 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
164 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
166 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
168 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
170 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
172 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
174 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
176 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
178 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
181 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
183 * hppa-dis.c: (print_insn_hppa): Add missing break after
186 * hppa-dis.c: Finish constifying various completers, register
189 1999-09-14 Michael Meissner <meissner@cygnus.com>
191 * configure.in (Canonicalization of target names): Remove adding
192 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
193 generates $ac_config_sub with a ${CONFIG_SHELL} already.
194 * configure: Regenerate.
196 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
198 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
200 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
202 1999-09-07 Nick Clifton <nickc@cygnus.com>
204 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
205 names for the mulu and muls patterns.
207 1999-09-04 Steve Chamberlain <sac@pobox.com>
209 * pj-opc.c: New file.
210 * pj-dis.c: New file.
211 * disassemble.c (disassembler): Handle bfd_arch_pj.
212 * configure.in: Handle bfd_pj_arch.
213 * Makefile.am: Rebuild dependencies.
214 (CFILES): Add pj-dis.c and pj-opc.c.
215 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
216 * configure, Makefile.in: Rebuild.
218 1999-09-04 H.J. Lu <hjl@gnu.org>
220 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
222 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
224 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
226 1999-08-04 Doug Evans <devans@casey.cygnus.com>
228 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
229 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
230 * m32r-opinst.c: Rebuild.
232 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
234 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
235 register args by 'f'.
237 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
239 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
240 extract_10U_store): New.
241 (print_insn_hppa): Add new completers.
243 * hppa-dis.c (signed_unsigned_names,mix_half_names,
244 saturation_names): New.
245 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
247 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
249 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
251 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
252 to decide to print a space.
254 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
256 * i386-dis.c: Add AMD athlon instruction support.
258 1999-08-10 Ian Lance Taylor <ian@zembu.com>
260 From Wally Iimura <iimura@microunity.com>:
261 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
262 overflow at end of address space.
263 (generic_print_address): Use sprintf_vma.
265 1999-08-08 Ian Lance Taylor <ian@zembu.com>
267 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
268 MKDEP. Rebuild dependencies.
269 * Makefile.in: Rebuild.
271 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
273 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
274 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
275 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
276 (print_insn_hppa): Add 64 bit condition completers.
278 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
280 * hppa-dis.c (print_insn_hppa): Change condition args to use
283 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
285 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
288 1999-07-21 Ian Lance Taylor <ian@zembu.com>
291 * configure.bat: Remove; obsolete.
293 1999-07-11 Ian Lance Taylor <ian@zembu.com>
295 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
296 (generic_strcat_address): Add cast to avoid warning.
297 * i386-dis.c: Initialize all structure fields to avoid warnings.
298 Add ATTRIBUTE_UNUSED as appropriate.
300 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
302 * sparc-dis.c (print_insn_sparc): Differentiate between
303 addition and oring when guessing symbol for comment.
305 1999-07-05 Nick Clifton <nickc@cygnus.com>
307 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
310 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
312 * i386-dis.c: Mention intel mode specials in macro char comment.
314 1999-06-21 Ian Lance Taylor <ian@zembu.com>
316 * alpha-dis.c: Don't include <stdlib.h>.
317 * arm-dis.c: Include "sysdep.h".
318 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
320 * Makefile.am: Rebuild dependencies.
321 * Makefile.in: Rebuild.
323 1999-06-16 Nick Clifton <nickc@cygnus.com>
325 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
328 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
330 * arm-dis.c (arm_regnames): Turn into a pointer to a register
332 (arm_regnames_standard): New variable: Array of ARM register
333 names according to ARM instruction set nomenclature.
334 (arm_regnames_apcs): New variable: Array of ARM register names
335 according to ARM Procedure Call Standard.
336 (arm_regnames_raw): New variable: Array of ARM register names
337 using just 'r' and the register number.
338 (arm_toggle_regnames): New function: Toggle the chosen register set
340 (parse_disassembler_options): New function: Parse any target
341 disassembler command line options.
342 (print_insn_big_arm): Call parse_disassembler_options if any
344 (print_insn_little_arm): Call parse_disassembler_options if any
347 1999-06-13 Ian Lance Taylor <ian@zembu.com>
349 * i386-dis.c (FWAIT_OPCODE): Define.
350 (used_prefixes): New static variable.
351 (fetch_data): Don't print an error message if we have already
352 fetched some bytes successfully.
353 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
354 (prefix_name): New static function.
355 (print_insn_i386): If setjmp fails, indicating a data error, but
356 we have managed to fetch some bytes, print the first one as a
357 prefix or a .byte pseudo-op. If fwait is followed by a non
358 floating point instruction, print the first prefix. Set
359 used_prefixes when prefixes are used. If any prefixes were not
360 used after disassembling the instruction, print the first prefix
361 instead of printing the instruction.
362 (putop): Set used_prefixes when prefixes are used.
363 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
364 (OP_DIR, OP_SIMD_Suffix): Likewise.
366 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
368 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
369 Support signx %reg, clruw %reg.
371 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
373 * sparc-opc.c: Add aliases Solaris as supports.
375 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
377 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
378 * Makefile.in: Regenerated.
380 1999-06-03 Philip Blundell <philb@gnu.org>
382 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
383 when target is PC-relative.
385 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
387 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
390 * m68k-dis.c (fetch_arg): Add places `n', `o'.
392 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
393 Add mcf5206e to appropriate instructions.
394 Add alias for MAC, MSAC.
396 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
399 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
400 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
402 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
404 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
406 * i386-dis.c (Ed): Define.
407 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
409 (OP_rm): Rename to OP_Rd.
412 (putop): Add const to template and p.
413 (print_insn_x86): Delete.
414 (print_insn_i386): Merge old function print_insn_x86. Add const
416 (struct dis386): Add const to name.
417 (dis386_att, dis386_intel): Add const.
418 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
419 (names32, names16, names8, names_seg, index16): Add const.
420 (grps, prefix_user_table, float_reg): Add const.
421 (float_mem_att, float_mem_intel): Add const.
422 (oappend): Add const to s.
423 (OP_REG): Add const to s.
424 (ptr_reg): Add const to s.
425 (dofloat): Add const to dp.
426 (OP_C): Don't skip modrm, it's now done in OP_Rd.
429 (OP_Rd): Check for valid mod. Call Op_E to print.
430 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
431 (OP_MS): Check for valid mod. Call Op_EM to print.
432 (OP_3DNowSuffix): Set obufp and use oappend rather than
433 strcat. Call BadOp() for errors.
434 (OP_SIMD_Suffix): Likewise.
435 (BadOp): New function.
437 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
439 * i386-dis.c (dis386_intel): Remove macro chars, except for
440 jEcxz. Change cWtR and cRtd to cW and cR.
441 (dis386_twobyte_intel): Remove macro chars here too.
442 (putop): Handle R and W macros for intel mode.
444 * i386-dis.c (SIMD_Fixup): New function.
445 (dis386_twobyte_att): Use it on movlps and movhps, and change
446 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
447 (dis386_twobyte_intel): Same here.
449 * i386-dis.c (Av): Remove.
453 (OP_SIMD_Suffix): New function.
454 (OP_DIR): Remove dead code.
455 (eAX_reg..eDI_reg): Renumber.
456 (onebyte_has_modrm): Table numbering comments.
457 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
458 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
459 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
460 and handle SIMD cmp insns in OP_SIMD_Suffix.
461 (info->bytes_per_line): Bump from 5 to 6.
463 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
464 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
466 PIII SIMD support from Doug Ledford <dledford@redhat.com>
467 * i386-dis.c (XM, EX, None): Define.
468 (OP_XMM, OP_EX, OP_None): New functions.
469 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
470 (GRP14): Rename to GRPAMD.
471 (GRP*): Add USE_GROUPS flag.
473 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
474 (twobyte_has_modrm): Add SIMD entries.
475 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
476 (grps): Add SIMD insns.
477 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
478 oappend repz if uses_f3_prefix. Add code to handle new groups for
481 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
482 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
483 operand from Av to Jv.
485 1999-05-07 Nick Clifton <nickc@cygnus.com>
487 * mcore-dis.c (print_insn_mcore): Use .short to display
488 unidentified instructions, not .word.
490 1999-04-26 Tom Tromey <tromey@cygnus.com>
492 * aclocal.m4, configure: Updated for new version of libtool.
494 1999-04-14 Doug Evans <devans@casey.cygnus.com>
496 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
497 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
499 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
501 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
504 1999-04-10 Doug Evans <devans@casey.cygnus.com>
506 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
507 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
509 1999-04-06 Ian Lance Taylor <ian@zembu.com>
511 * opintl.h (LC_MESSAGES): Never define.
513 1999-04-04 Ian Lance Taylor <ian@zembu.com>
515 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
516 (separator_char, scale_char): Likewise.
517 (print_insn_x86): Likewise.
518 (print_insn_i386): Likewise. Add declaration.
520 1999-03-26 Doug Evans <devans@casey.cygnus.com>
522 * fr30-dis.c: Rebuild.
523 * m32r-dis.c: Rebuild.
525 1999-03-23 Ian Lance Taylor <ian@zembu.com>
527 * m68k-opc.c: Change compare instructions to use "@s" rather than
528 ";s" when used with an immediate operand.
530 1999-03-22 Doug Evans <devans@casey.cygnus.com>
532 * cgen-opc.c (cgen_set_cpu): Delete.
533 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
534 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
536 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
538 * po/opcodes.pot: Rebuild.
540 1999-03-16 Martin Hunt <hunt@cygnus.com>
542 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
544 1999-03-11 Doug Evans <devans@casey.cygnus.com>
546 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
547 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
548 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
549 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
550 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
551 * m32r-opinst.c: Rebuild.
553 1999-02-25 Doug Evans <devans@casey.cygnus.com>
555 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
556 (cgen_hw_lookup_by_num): Rewrite.
557 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
558 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
559 * m32r-opinst.c: Rebuild.
561 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
563 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
564 (insert_jhint): Fix insertion mask.
565 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
567 1999-02-10 Doug Evans <devans@casey.cygnus.com>
569 * Makefile.in: Rebuild.
571 1999-02-09 Doug Evans <devans@casey.cygnus.com>
573 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
574 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
575 * Makefile.am: Remove references to them.
576 (HFILES): Add fr30-desc.h,m32r-desc.h.
577 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
579 (ALL_MACHINES): Update.
580 * configure.in: Redo handling of cgen_files.
581 (bfd_i960_arch): Delete i960c-*.lo files.
582 * configure: Regenerate.
583 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
584 (hash_insn_array): Rewrite.
585 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
586 (hash_insn_array): Rewrite.
587 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
588 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
589 (cgen_lookup_get_insn_operands): Ditto.
590 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
591 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
592 * po/POTFILES.in: Rebuild.
593 * po/opcodes.pot: Rebuild.
595 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
597 * Makefile.am: Rebuild dependencies.
598 (HFILES): Add fr30-opc.h.
599 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
600 * Makefile.in: Rebuild.
602 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
603 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
605 * acconfig.h: Remove.
606 * configure: Rebuild with current autoconf/automake.
607 * aclocal.m4: Likewise.
608 * config.in: Likewise.
609 * Makefile.in: Likewise.
611 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
613 * m68k-opc.c: Correct move (not movew) to status word on 5200.
615 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
617 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
618 * i386-dis.c (x_mode): Define.
622 (dis386_twobyte): Remove.
623 (dis386_twobyte_att): New.
624 (dis386_twobyte_intel): New.
625 (print_insn_x86): Use new arrays.
627 (float_mem_intel): New.
628 (float_mem_att): New.
629 (dofloat): Use new float_mem arrays.
630 (print_insn_i386_att): New.
631 (print_insn_i386_intel): New.
632 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
633 (putop): Handle intel syntax.
634 (OP_indirE): Handle intel syntax.
635 (OP_E): Handle intel syntax.
636 (OP_I): Handle intel syntax.
637 (OP_sI): Handle intel syntax.
638 (OP_OFF): Handle intel syntax.
642 1999-01-27 Doug Evans <devans@casey.cygnus.com>
644 * fr30-opc.h,fr30-opc.c: Rebuild.
645 * i960c-opc.h,i960c-opc.c: Rebuild.
646 * m32r-opc.c: Rebuild.
648 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
650 * hppa-dis.c: revert HP merge changes until HP gives us
653 1999-01-19 Nick Clifton <nickc@cygnus.com>
655 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
656 offsets as well as symbloic address.
658 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
660 * hppa-dis.c: fix comments and some indentation.
662 1999-01-12 Doug Evans <devans@casey.cygnus.com>
664 * fr30-opc.c,i960c-opc.c: Regenerate.
666 1999-01-11 Doug Evans <devans@casey.cygnus.com>
668 * fr30-opc.c: Regenerate.
670 1999-01-06 Doug Evans <devans@casey.cygnus.com>
672 * m32r-dis.c: Regenerate.
674 1999-01-05 Doug Evans <devans@casey.cygnus.com>
676 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
677 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
678 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
680 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
682 * configure.in: Require autoconf 2.12.1 or higher.
684 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
686 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
688 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
690 * fr30-opc.c: Regenerated.
692 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
694 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
696 1998-12-15 Dave Brolley <brolley@cygnus.com>
698 * fr30-opc.c,fr30-opc.h: Regenerated.
700 1998-12-14 Dave Brolley <brolley@cygnus.com>
702 * fr30-opc.c,fr30-opc.h: Regenerated.
704 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
706 * fr30-opc.c,fr30-opc.h: Regenerated.
708 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
710 * m32r-opc.c: Regenerate.
712 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
714 * dis-buf.c (generic_strcat_address): reformat to GNU coding
715 conventions. change sprintf call to an sprintf_vma call.
717 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
719 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
721 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
723 The following changes were made by
724 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
725 David Taylor <taylor@texas.cygnus.com>, and
726 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
727 merge in changes by HP; HP did not create ChangeLog entries.
729 * dis-buf.c (generic_strcat_address): new function.
731 * hppa-dis.c: Changes to improve hppa disassembly.
732 Changed formatting in : reg_names, fp_reg_names,control_reg,
733 New variables : sign_extension_names, deposit_names, conversion_names
734 float_test_names, compare_cond_names_double, add_cond_names_double,
735 logical_cond_names_double, unit_cond_names_double,
736 branch_push_pop_names, saturation_names, shift_names, mix_names,
737 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
738 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
739 (fput_const): renamed as fput_hex_const
741 - use the macros fputs_filtered and
742 fput_decimal_const whenever possible; calls to sign_extend require
743 2 params -- add a missing second param of 0.
744 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
745 architecture version number of current machine. HP folks are
746 trying to handle situation where the target program was compiled
747 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
749 - added new cases : 'g', 'B', 'm'
750 - added cases specifically for PA 2.0
751 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
752 - calls to fput_const become calls to fput_hex_const
754 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
756 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
757 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
758 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
759 * Makefile.in: Rebuilt.
760 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
762 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
763 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
765 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
767 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
769 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
771 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
773 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
774 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
776 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
778 * fr30-opc.c: Regenerate.
780 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
782 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
784 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
786 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
788 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
790 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
792 1998-11-30 Doug Evans <devans@casey.cygnus.com>
794 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
795 CGEN_INSN_BASE_VALUE.
796 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
797 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
799 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
801 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
803 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
805 * fr30-asm.c,fr30-dis.c: Regenerated.
807 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
809 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
811 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
813 * fr30-opc.c: Regenerated.
815 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
817 * fr30-opc.c: Regenerated.
818 * fr30-opc.h: Regenerated.
819 * fr30-dis.c: Regenerated.
820 * fr30-asm.c: Regenerated.
822 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
824 * mips-opc.c (sync.p,sync.l): Swap insn values.
826 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
828 * fr30-opc.c: Regenerate.
830 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
832 * fr30-opc.c: Regenerated.
833 * fr30-opc.h: Regenerated.
835 1998-11-18 Doug Evans <devans@casey.cygnus.com>
837 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
838 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
840 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
842 * fr30-opc.c: Regenerated.
844 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
846 * fr30-opc.c: Regenerated.
847 * fr30-opc.h: Regenerated.
848 * fr30-dis.c: Regenerated.
849 * fr30-asm.c: Regenerated.
851 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
853 * po/opcodes.pot: Regenerated.
854 * fr30-opc.c: Regenerated.
855 * fr30-opc.h: Regenerated.
856 * fr30-dis.c: Regenerated.
857 * fr30-asm.c: Regenerated.
859 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
861 * disassemble.c (disassembler): Add support for FR30 target.
863 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
865 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
866 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
868 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
870 * po/opcodes.pot: Regenerate.
871 * po/POTFILES.in: Regenerate.
872 * fr30-opc.c: Regenerate.
873 * fr30-opc.h: Regenerate.
875 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
877 * m32r-asm.c: Regenerate.
879 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
881 * configure.in: Added case for bfd_fr30_arch.
882 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
883 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
884 (CLEANFILES): Added stamp-fr30.
886 * fr30-asm.c: New file.
887 * fr30-dis.c: New file.
888 * fr30-opc.c: New file.
889 * fr30-opc.h: New file.
890 * po/POTFILES.in: Regenerated
891 * po/opcodes.pot: Regenerated
893 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
895 * configure.in: detect cygwin* instead of cygwin32*
896 * configure: regenerate
898 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
900 * mips-opc.c (IS_M): Added.
902 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
904 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
906 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
908 * m32r-opc.h,m32r-opc.c: Regenerate.
910 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
912 * i386-dis.c (OP_3DNowSuffix): New static function.
915 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
916 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
917 (insn_codep): New static variable.
918 (print_insn_x86): Init insn_codep after prefixes.
919 (grps): Add GRP14 entries for prefetch, prefetchw.
922 From Jeff B Epler <jepler@usgs.gov>
923 * i386-dis.c (Suffix3DNow): New table.
925 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
927 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
929 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
931 * d10v-dis.c (print_operand): If num is nonzero, then
932 add OPERAND_ACC1, not OPERAND_ACC0.
934 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
936 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
939 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
941 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
944 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
946 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
948 1998-09-09 Michael Meissner <meissner@cygnus.com>
950 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
953 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
955 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
957 (print_insn_little_arm): Detect Thumb symbols in elf object
960 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
962 * alpha-dis.c (print_insn_alpha): Use the machine type to
963 decide which PALcode set to include.
965 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
967 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
969 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
971 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
972 MSUB and MSUBS instructions.
974 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
976 * ppc-opc.c (powerpc_operands): Omit parens around additions in
979 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
981 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
982 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
983 +, -, and d for ColdFire.
985 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
986 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
987 (extract_mbe): Likewise.
989 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
991 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
993 * m10300-opc.c: First cut at UDF instructions.
995 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
997 * m32r-opc.c: Regenerate (remove semantic descriptions).
999 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1001 * arm-dis.c (print_insn_big_arm): Fix indentation.
1002 (print_insn_little_arm): Likewise.
1004 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1006 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1008 (print_insn_little_arm): Likewise.
1010 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1012 Move all global state data into opcode table struct, and treat
1013 opcode table as something that is "opened/closed".
1014 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1015 (cgen_asm_init): Delete.
1016 (cgen_set_parse_operand_fn): New function.
1017 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1018 (cgen_dis_init): Delete.
1019 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1020 (cgen_current_{opcode_table_mach,endian}): Delete.
1021 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1023 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1025 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1028 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1030 * m10300-opc.c: Add entries for "no_match_operands" field in
1033 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1035 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1037 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1039 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1041 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1043 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1045 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1047 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1048 will be masked later.
1050 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1052 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1054 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1056 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1058 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1060 * m10300-dis.c: Only recognize instructions from the currently
1062 * m10300-opc.c: Add field indicating the particular variant of
1063 the mn10300 each instruction is available on.
1065 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1067 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1068 * Makefile.am: Rebuild dependencies.
1069 (CFILES): Add vax-dis.c.
1070 (ALL_MACHINES): Add vax-dis.lo.
1071 * aclocal.m4: Rebuild with current libtool.
1072 * configure, Makefile.in: Rebuild.
1074 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1076 * vax-dis.c: New file, from work by Pauline Middelink
1077 <middelin@polyware.iaf.nl>.
1078 * disassemble.c (ARCH_vax): Define if ARCH_all.
1079 (disassembler): Add case for ARCH_vax.
1080 * makefile.vms: Support compilation on vms/vax.
1082 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1084 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1085 related to sign extension and the size of ints.
1087 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1089 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1090 instructions. Support (sp) addressing mode by expanding it into
1093 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1095 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1097 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1099 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1101 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1103 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1106 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1108 * mips-dis.c (print_insn_little_mips): Previously, instruction
1109 printing references the symbol table to determine whether the
1110 instruction resides in a block regular instructions or mips16
1111 instructions. However, when the disassembler gets used in other
1112 environments where the symbol table is not present, we no longer
1113 rely in the symbol table, rather, use the low bit of the
1114 instructions address to guess. There should be no change for usage
1115 of the disassembler in host based programs, gdb, objdump.
1116 (print_insn_big_mips): ditto.
1117 (print_insn_mips): ditto
1119 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1121 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1123 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1125 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1127 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1129 * i386-dis.c (index16): Add '%' to register names. Use ','
1132 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1134 * i386-dis.c: Don't print opcode suffix when we can figure out the
1135 size (and gas can!) by register operands, or from the default
1137 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1139 (dis386, dis386_twobyte, grps): Use new suffix macros.
1140 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1141 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1142 order of cmps operands to agree with Intel docs. Correct operand
1143 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1144 agree with Intel docs.
1145 (print_insn_x86): Print orphan fwait before other prefixes.
1146 Return correct byte count for orphan fwait with prefixes. Don't
1147 print `bound' operands in reverse order.
1148 (ckprefix): Stop accumulating prefixes if we get fwait.
1149 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1151 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1153 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1154 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1156 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1158 Fix problems when bfd_vma is wider than long.
1159 * i386-dis.c: Make op_address and start_pc unsigned.
1160 (set_op): Make parameter unsigned.
1161 (print_insn_x86): Cast to bfd_vma when passing a value to
1163 * ns32k-dis.c (CORE_ADDR): Don't define.
1164 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1165 bfd_scan_vma to read back address.
1166 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1168 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1169 (NEXTULONG): New definition.
1170 (print_insn_m68k): Avoid overflow when computing third argument of
1172 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1173 Use disp instead of val to store offset values.
1174 (print_indexed): Use base_disp instead of word to store base
1175 displacement, to avoid overflow.
1176 * m10300-dis.c (disassemble): Cast value to long when computing
1177 pc-relative address, to get correct sign extension.
1179 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1181 * m32r-opc.c: Regenerate.
1183 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1185 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1186 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1188 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1190 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1192 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1194 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1196 (OP_DSreg): Rename from OP_DSSI.
1197 (OP_ESreg): Rename from OP_ESDI.
1198 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1200 (append_seg): Rename from append_prefix.
1201 (ptr_reg): New function.
1202 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1204 (PREFIX_ADDR): Rename from PREFIX_ADR.
1205 (float_reg): Add non-broken opcodes for people who don't want
1208 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1210 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1213 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1215 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1217 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1219 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1220 0; produce error message for shifts of size 32 (or 64 for 64-bit
1221 shifts), because the hardware doesn't support them.
1223 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1225 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1226 LONG_2, LONG_2b formats to use this new operand.
1228 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1230 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1232 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1234 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1235 endian data support.
1237 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1239 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1240 and SHORT_B3b formats to use Rb instead of Ra.
1242 Add FLAG_MUL16 to MUL2XH opcode.
1244 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1245 to existing 1.1.1 parallelisation prohibition procedure.
1247 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1249 * m32r-asm.c,m32r-dis.c: Regenerate.
1251 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1253 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1254 with a shift count of 0.
1256 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1258 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1259 (cgen_hw_lookup_by_num): New function.
1261 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1263 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1265 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1267 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1268 as big-endian on SPARClite.
1270 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1272 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1274 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1276 * po/Make-in (install-info): New target.
1278 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1280 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1281 * configure: Rebuild.
1283 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1285 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1286 variety of ISA2 instructions to set bottom ten bits of trap code.
1288 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1290 * Makefile.am (config.status): Add explicit target so that
1291 config.status depends upon bfd/configure.in.
1292 * Makefile.in: Rebuild.
1294 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1296 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1297 instructions to set bottom ten bits of break code.
1298 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1299 for above optional argument.
1301 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1303 * makefile.vms: Run dec c with /nodebug.
1305 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1307 * Makefile.in: Rebuilt.
1308 * Makefile.am: Regenerated dependencies with mkdep.
1310 * opintl.h (_): Define as dgettext.
1312 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1314 * cgen-asm.c: Internationalised.
1315 * m32r-asm.c: Internationalised.
1316 * m32r-dis.c: Internationalised.
1317 * m32r-opc.c: Internationalised.
1319 * aclocal.m4: Regenerated.
1320 * configure: Regenerated.
1321 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1322 * Makefile.in: Rebuild.
1323 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1324 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1326 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1328 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1330 * aclocal.m4, configure: Rebuild with current tools.
1332 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1334 * opintl.h: New file - contains internationalisation macros used
1335 by source files in this directory.
1336 * po/: New subdirectory - contains internationalisation files.
1337 * po/Make-in: New file - Makefile constructor.
1338 * po/POTFILES.in: New file - list of files in opcodes directory
1339 that should be scan for internationalisation macros.
1340 * po/opcodes.pot: New file - list of internationisation strings
1341 found in files mentioned in po/POTFILES.in.
1342 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1343 entry. Add intl directory to include paths.
1344 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1345 HAVE_STRCPY, HAVE_LC_MESSAGES
1346 * configure.in: Add rule to build Makefile in po subdirectory.
1347 * Makefile.in: Rebuilt.
1348 * aclocal.m4: Rebuilt.
1349 * config.in: Rebuilt.
1350 * configure: Rebuilt.
1351 * alpha-opc.c: Internationalised.
1352 * arc-dis.c: Internationalised.
1353 * arc-opc.c: Internationalised.
1354 * arm-dis.c: Internationalised.
1355 * cgen-asm.c: Internationalised.
1356 * d30v-dis.c: Internationalised.
1357 * dis-buf.c: Internationalised.
1358 * h8300-dis.c: Internationalised.
1359 * h8500-dis.c: Internationalised.
1360 * i386-dis.c: Internationalised.
1361 * m10200-dis.c: Internationalised.
1362 * m10300-dis.c: Internationalised.
1363 * m68k-dis.c: Internationalised.
1364 * m88k-dis.c: Internationalised.
1365 * mips-dis.c: Internationalised.
1366 * ns32k-dis.c: Internationalised.
1367 * opintl.h: Internationalised.
1368 * ppc-opc.c: Internationalised.
1369 * sparc-dis.c: Internationalised.
1370 * v850-dis.c: Internationalised.
1371 * v850-opc.c: Internationalised.
1373 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1375 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1376 (asm_hash_table_entries): New variable.
1377 (cgen_asm_init): Free asm_hash_table_entries.
1378 (hash_insn_array,hash_insn_list): New functions.
1379 (build_asm_hash_table): Use them. Hash macro insns as well.
1380 (cgen_asm_lookup_insn): Update.
1381 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1382 (dis_hash_table_entries): New variable.
1383 (cgen_dis_init): Free dis_hash_table_entries.
1384 (hash_insn_array,hash_insn_list): New functions.
1385 (build_dis_hash_table): Use them. Hash macro insns as well.
1386 (cgen_dis_lookup_insn): Update.
1387 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1388 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1389 (cgen_macro_insn_count): New function.
1390 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1392 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1394 * i386-dis.c (OP_DSSI): Print segment override.
1396 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1398 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1401 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1403 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1404 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1405 * configure.in: Define and substitute WIN32LDFLAGS and
1407 * aclocal.m4: Rebuild with new libtool.
1408 * configure, Makefile.in: Rebuild.
1410 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1412 * m32r-opc.c: Regenerate.
1414 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1416 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1417 before trying to copy it.
1418 * Makefile.in: Rebuild.
1420 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1422 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1424 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1426 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1427 from an arbitrary valid buffer instead of fetching them on demand
1429 (invalid_float): use bit_extract_simple() instead of bit_extract().
1431 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1433 From H.J. Lu <hjl@gnu.org>:
1434 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1437 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1439 * Branched binutils 2.9.
1441 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1443 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1444 disassembling last 4 bytes of a section.
1446 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1448 Fix some gcc -Wall warnings:
1449 * arc-dis.c (print_insn): Add casts to avoid warnings.
1450 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1451 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1452 * m10200-dis.c (disassemble): Likewise.
1453 * m10300-dis.c (disassemble): Likewise.
1454 * ns32k-dis.c (print_insn_ns32k): Likewise.
1455 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1456 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1457 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1458 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1459 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1460 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1461 * tic80-dis.c (print_one_instruction): Likewise.
1462 * w65-dis.c (print_operand): Likewise.
1463 * z8k-dis.c (fetch_data): Likewise.
1464 * a29k-dis.c: Add return type for find_byte_func_type.
1465 * arc-opc.c: Include <stdio.h>. Remove declarations of
1466 insert_multshift and extract_multshift.
1467 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1469 (extract_value): Fully parenthesize expression.
1470 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1471 * h8500-opc.h (h8500_table): Fully bracket initializer.
1472 * w65-opc.h (optable): Likewise.
1473 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1474 * i386-dis.c (OP_E): Initialize local variables.
1475 * m10200-dis.c (print_insn_mn10200): Likewise.
1476 * mips-dis.c (print_insn_mips16): Likewise.
1477 * sh-dis.c (print_insn_shx): Likewise.
1478 * v850-dis.c (print_insn_v850): Likewise.
1479 * ns32k-dis.c (print_insn_arg): Declare.
1480 (get_displacement, invalid_float): Declare.
1481 (list_search, sign_extend, flip_bytes): Declare return type.
1482 (get_displacement): Likewise.
1483 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1485 (print_insn_ns32k): Make i unsigned.
1486 (invalid_float): Make static. Declare type of val.
1487 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1488 on each for iteration.
1489 * tic30-dis.c (get_indirect_operand): Likewise.
1490 * z8k-dis.c (print_insn_z8001): Declare return type.
1491 (print_insn_z8002): Likewise.
1492 (unparse_instr): Fix sprintf format strings.
1494 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1496 * mips-opc.c: Add "sync.l" and "sync.p".
1498 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1500 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1501 default m68k variant to recognize.
1503 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1504 (ctrl, cobr, mem, ea): Likewise.
1505 (print_addr): Likewise. Remove cast.
1506 (ea): Cast argument of print_addr to bfd_vma.
1508 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1510 (cgen_parse_unsigned_integer): Likewise.
1511 (cgen_parse_address): Likewise.
1513 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1515 * i960-dis.c (ctrl): Add full braces to structure initialization.
1516 (cobr, mem, reg): Likewise.
1517 (ea): Correct parenthesization in expression.
1519 * cgen-asm.c: Include <ctype.h>.
1520 (build_asm_hash_table): Remove unused local variable i.
1521 (cgen_parse_keyword): Add casts to avoid warnings.
1523 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1524 symbol. Fix indentation.
1525 (print_insn_little_arm): Likewise.
1527 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1529 * configure.in: Use AM_DISABLE_SHARED.
1530 * aclocal.m4, configure: Rebuild with libtool 1.2.
1532 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1534 These patches are courtesy of Jonathan Walton and Tony Thompson
1535 (athompso@cambridge.arm.com).
1537 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1540 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1541 both the offset and the label closest to the destination.
1543 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1545 * m32r-opc.h: Regenerate.
1547 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1549 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1551 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1553 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1554 assume that info->symbols is non-empty.
1556 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1558 * alpha-opc.c (cvtqs) There is no such thing.
1559 (cvttq): Missing most of the /*d variants.
1561 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1563 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1564 delayed branches or jumps.
1566 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1568 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1570 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1571 * tic30-dis.c (print_branch): Likewise.
1573 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1575 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1576 saved_symbol code as it is no longer needed.
1578 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1580 * cgen-asm.c: Include symcat.h.
1581 * cgen-dis.c,cgen-opc.c: Ditto.
1582 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1584 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1586 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1588 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1590 * m32r-opc.[ch]: Regenerate.
1592 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1594 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1595 arguments. Don't perform validation here.
1596 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1598 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1600 * m32r-opc.c: Regenerate.
1602 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1604 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1605 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1607 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1609 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1611 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1613 * configure.in: Get the version number from BFD.
1614 * configure: Rebuild.
1616 From H.J. Lu <hjl@gnu.org>:
1617 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1618 * Makefile.in: Rebuild.
1620 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1622 * m32r-opc.c: Regenerate.
1623 * m32r-opc.h: Regenerate.
1625 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1627 * m32r-opc.c: Regenerate.
1629 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1631 Fix rac to accept only a0:
1632 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1633 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1634 Introduce OPERAND_GPR.
1635 * d10v-dis.c (print_operand): Likewise.
1637 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1639 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1640 (cgen_hw_lookup): Make result const.
1641 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1643 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1645 * configure, aclocal.m4: Rebuild with new libtool.
1647 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1649 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1650 instructions use a PC relative branch, not absolute.
1652 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1654 * configure.in: Set libtool_enable_shared rather than
1655 libtool_shared. Remove diversion hack.
1656 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1658 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1660 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1661 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1663 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1665 * tic30-dis.c: New file.
1666 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1667 * configure.in: Handle bfd_tic30_arch.
1668 * Makefile.am: Rebuild dependencies.
1669 (CFILES): Add tic30-dis.c
1670 (ALL_MACHINES): Add tic30-dis.lo.
1671 * configure, Makefile.in: Rebuild.
1673 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1675 * m32r-opc.h (HAVE_CPU_M32R): Define.
1677 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1679 * v850-opc.c (insertion routines): If both alignment and size is
1680 wrong then report this.
1682 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1684 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1685 Only recognize instructions for the current target_processor.
1687 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1689 * d10v-dis.c (PC_MASK): Correct value.
1690 (print_operand): If there's a reloc, don't calculate the
1691 address because they could be in different sections.
1693 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1695 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1696 instruction after the 4650's "mul" instruction; nobody's using the
1697 4010 these days. If object files someday indicate which processor
1698 variant they're intended for, we can do a better job at this.
1700 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1702 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1703 table provided entry size. Use CGEN_INSN_MNEMONIC.
1704 (cgen_parse_keyword): Rewrite.
1705 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1706 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1707 * cgen-opc.c: Clean up pass over `struct foo' usage.
1708 (cgen_keyword_lookup_value): Handle "" entry.
1709 (cgen_keyword_add): Likewise.
1711 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1713 * mips-opc.c: Add FP_D to s.d instruction flags.
1715 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1717 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1719 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1721 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1722 PC relative offset forms before the 15 bit forms. An assembler command
1723 line option now chooses the default.
1725 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1727 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1728 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1730 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1732 * configure: Only build libopcodes shared if --enable-shared's value
1733 was `yes', or was set to `*opcodes*'.
1734 * aclocal.m4: Likewise.
1735 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1736 original source of this bit of code. It's not clear what the best fix
1739 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1741 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1742 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1743 offset forms before the 15 bit forms, to default to the long forms.
1745 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1747 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1749 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1751 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1752 symbol if none is present.
1753 (print_insn_big_arm): Prevent examination of stored symbol if
1756 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1758 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1760 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1762 * disassemble.c: Remove disasm_symaddr() function.
1764 * arm-dis.c: Use info->symbol instead of info->flags to determine
1765 if disassmbly should be in Thumb or Arm mode.
1767 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1769 * arm-dis.c: Add support for disassembling Thumb opcodes.
1770 (print_insn_thumb): New function.
1772 * disassemble.c (disasm_symaddr): New function.
1774 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1775 (thumb_opcodes): Table of Thumb opcodes.
1777 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1779 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1781 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1782 and 'v' as operand types.
1784 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1786 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1787 <olivier.carmona@di.epfl.ch>.
1788 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1789 which has a two word opcode with a one word argument.
1791 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1793 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1794 unsigned, not signed.
1795 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1797 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1799 * d10v-dis.c (print_operand):
1800 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1802 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1804 * d10v-opc.c (OPERAND_FLAG): Split into:
1805 (OPERAND_FFLAG, OPERAND_CFLAG) .
1809 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1811 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1812 field for all INSN_MACRO's.
1813 * mips16-opc.c: same
1815 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1817 * mips-opc.c (sync,cache): These are 3900 insns.
1819 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1821 sh-opc.h (sh_table): Remove ftst/nan.
1823 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1825 * mips-opc.c (ffc, ffs): Fix mask.
1827 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1829 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1832 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1834 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1835 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1837 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1839 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1840 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1842 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1844 * v850-dis.c (disassemble): Replace // with /* ... */
1846 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1848 * sparc-opc.c: Add wr & rd for v9a asr's.
1849 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1850 (v9a_asr_reg_names): New variable.
1851 Patch from David Miller <davem@vger.rutgers.edu>.
1853 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1855 * sparc-opc.c (v9notv9a): New insn type.
1856 (IMPDEP): Move to the end to not conflict with edge8 et al.
1857 Patch from David Miller <davem@vger.rutgers.edu>.
1859 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1861 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1863 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1865 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1867 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1869 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1870 of disassemble_info structure to determine if an overlay address
1871 has a matching symbol in low memory.
1873 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1874 new symbol_at_address_func field in disassemble_info structure.
1876 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1878 * v850-opc.c (extract_d22): Use signed arithmatic.
1880 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1882 * mips-opc.c: Three op mult is not an ISA insn.
1884 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1886 * mips-opc.c: Fix formatting.
1888 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1890 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1891 than assuming that char is signed. Explicitly sign extend 16 bit
1892 values, rather than assuming that short is 16 bits.
1893 (OP_sI, OP_J, OP_DIR): Likewise.
1895 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1897 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1900 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1902 * v850-opc.c: Fix typo in comment.
1904 * v850-dis.c (disassemble): Add test of processor type when
1905 determining opcodes.
1907 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * configure.in: Use a diversion to set enable_shared before the
1910 arguments are parsed.
1911 * configure: Rebuild.
1913 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1915 * m68k-opc.c (TBL1): Use ! rather than `.
1916 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1918 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1920 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1922 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1924 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1927 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1928 * aclocal.m4: Rebuild with new libtool.
1929 * configure: Rebuild.
1931 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1933 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1935 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1937 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1939 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1941 * v850-opc.c (v850_opcodes): Further rearrangements.
1943 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1945 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1947 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1949 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1952 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1954 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1956 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1958 * v850-opc.c: Initialise processors field of v850_opcode structure.
1960 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1962 Merge changes from Martin Hunt:
1964 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1966 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1967 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1968 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1970 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1972 * d30v-dis.c (print_insn): First operand of d*i (delayed
1973 branch) instructions is relative.
1975 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1976 (d30v_operand_table): Add IMM6S3 type.
1977 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1979 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1980 and cmp instructions.
1982 * d30v-opc.c: Correct entries for repeat*, and sat*.
1983 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1984 types. Correct several formats.
1986 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1988 * d30v-opc.c (pre_defined_registers): Change control registers.
1990 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1991 SHORT_C2. Manual was incorrect.
1993 * d30v-dis.c (lookup_opcode): Return value now indicates
1994 if an opcode has a short and a long form. Used for deciding
1995 to append a ".s" or ".l".
1996 (print_insn): Append a ".s" to an instruction if it is
1997 the short form and ".l" if it is a long form. Do not append
1998 anything if the instruction has only one possible size.
2000 * d30v-opc.c: Change mulx2h to require an even register.
2001 New form: SHORT_A2; a SHORT_A form that needs an even
2002 register as the first operand.
2004 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2005 instruction was not being disassembled if there were an odd
2006 number of instructions.
2008 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2010 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2012 * v850-dis.c (disassemble): Improved display of register lists.
2014 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2016 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2017 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2018 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2019 fandnot1s, fandnot2s.
2021 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2023 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2025 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2027 * cgen-asm.c (cgen_parse_address): New argument resultp.
2028 All callers updated.
2029 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2031 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2033 * mn10200-dis.c (disassemble): PC relative instructions are
2034 relative to the next instruction, not the current instruction.
2036 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2038 * v850-dis.c (disassemble): Only signed extend values that are not
2039 returned by extract functions.
2040 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2042 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2044 * v850-opc.c: Update comments. Remove use of
2045 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2047 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2049 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2051 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2053 * configure: Rebuilt with latest devo autoconf for NT support.
2055 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2057 * v850-dis.c (disassemble): Use curly brace syntax for register
2060 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2061 where r0 is being used as a destination register.
2063 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2065 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2067 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2069 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2071 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2073 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2074 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2077 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2079 * configure (cgen_files): Add support for v850e target.
2080 * configure.in (cgen_files): Add support for v850e target.
2082 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2084 * configure (cgen_files): Add support for v850ea target.
2085 * configure.in (cgen_files): Add support for v850ea target.
2087 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2089 * configure.in (bfd_arc_arch): Add.
2090 * configure: Rebuild.
2091 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2092 * Makefile.in: Rebuild.
2093 * arc-dis.c, arc-opc.c: New files.
2094 * disassemble.c (ARCH_all): Define ARCH_arc.
2095 (disassembler): Add ARC support.
2097 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2099 * v850-dis.c (disassemble): Add support for v850EA instructions.
2101 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2102 (v850_opcodes): Add v850EA instructions.
2104 * v850-dis.c (disassemble): Add support for v850E instructions.
2106 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2107 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2108 insert_spe, extract_spe): New Functions.
2109 (v850_opcodes): Add v850E instructions.
2111 * v850-opc.c: Reorganised and re-layed out to improve readability
2114 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2116 * configure: Rebuild with autoconf 2.12.1.
2118 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2120 * aclocal.m4, configure: Rebuild with new automake patches.
2122 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2124 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2125 * acinclude.m4: Just include acinclude.m4 from BFD.
2126 * aclocal.m4, configure: Rebuild.
2128 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2130 * Makefile.am: New file, based on old Makefile.in.
2131 * acconfig.h: New file.
2132 * acinclude.m4: New file.
2133 * stamp-h.in: New file.
2134 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2135 Removed shared library handling; now handled by libtool. Replace
2136 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2137 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2138 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2139 handling in AC_OUTPUT.
2140 * dep-in.sed: Change .o to .lo.
2141 * Makefile.in: Now built with automake.
2142 * aclocal.m4: Now built with aclocal.
2143 * config.in, configure: Rebuild.
2145 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2147 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2149 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2151 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2153 * sparc-dis.c (sorted_opcodes): New static local.
2154 (struct opcode_hash): `opcode' is pointer to const element.
2155 (build_hash): First arg is now table of sorted pointers.
2156 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2157 (compare_opcodes): Update.
2159 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2161 * cgen-opc.c: #include <ctype.h>.
2162 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2163 Handle case insensitive hashing.
2164 (hash_keyword_value): Change type of `value' to unsigned int.
2166 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2168 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2169 precision FP, mark it as such. Likewise for double precision
2170 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2173 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2175 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2177 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2178 nesting depth when all the macros are expanded.
2180 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2182 * sparc-opc.c: The fcmp v9a instructions take an integer register
2183 as a destination, not a floating point register. From Christian
2184 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2186 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2188 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2189 syntax. From Roman Hodek
2190 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2192 * i386-dis.c (twobyte_has_modrm): Fix pand.
2194 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2196 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2198 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2200 * arm-dis.c: Add prototypes for arm_decode_shift and
2203 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2205 * mips-opc.c: Add r3900 insns.
2207 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2209 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2210 print delay slot instructions on the same line. When using a PC
2211 relative load, add a comment with the value being loaded if it can
2214 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2216 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2217 to pushS/popS for segment regs and byte constant so that
2218 pushw/popw printed when in 16 bit data mode.
2220 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2221 print cbtw, cwtd in 16 bit data mode.
2222 * i386-dis.c (putop): extra case W to support above.
2224 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2225 address size prefix in 16 bit address mode.
2227 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * sh-dis.c: Reindent. Rename local variable fprintf to
2232 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2234 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2236 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2238 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2240 * mips16-opc.c (mip16_opcodes): same.
2242 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2244 * m68k-opc.c (moveb): Change $d to %d.
2246 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2248 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2249 (twobyte_has_modrm): Likewise.
2251 (OP_MMX, OP_EM, OP_MS): New static functions.
2253 * i386-dis.c: Revert patch of April 4. The output now matches
2256 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2258 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2261 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2263 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2265 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2267 * Makefile.in (install): Depend upon installdirs.
2268 (installdirs): New target.
2270 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2272 From Thomas Graichen <graichen@rzpd.de>:
2273 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2274 * configure: Rebuild.
2276 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2278 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2279 Delete string{,s}.h support.
2281 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2283 * cgen-asm.c (cgen_parse_operand_fn): New global.
2284 (cgen_parse_{{,un}signed_integer,address}): Update call to
2285 cgen_parse_operand_fn.
2286 (cgen_init_parse_operand): New function.
2287 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2288 from cgen_asm_init_parse.
2289 (m32r_cgen_assemble_insn): New operand `errmsg'.
2290 Delete call to as_bad, return error message to caller.
2291 (m32r_cgen_asm_hash_keywords): #if 0 out.
2293 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2295 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2297 [case 'J']: Fix typo in register name.
2299 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2301 * configure.in: Substitute SHLIB_LIBS.
2302 * configure: Rebuild.
2303 * Makefile.in (SHLIB_LIBS): New variable.
2304 ($(SHLIB)): Use $(SHLIB_LIBS).
2306 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2308 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2310 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2312 * disassemble.c (disassembler): Handle m32r.
2314 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2316 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2317 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2318 * Makefile.in (CFILES): Add them.
2319 (ALL_MACHINES): Add them.
2320 (dependencies): Regenerate.
2321 * configure.in (cgen_files): New variable.
2322 (bfd_m32r_arch): Add entry.
2323 * configure: Regenerate.
2325 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2327 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2328 * configure: Rebuild.
2330 * Makefile.in: Rebuild dependencies.
2332 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2334 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2337 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2339 * Branched binutils 2.8.
2341 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2343 * m10200-dis.c: Rename from mn10200-dis.c.
2344 * m10200-opc.c: Rename from mn10200-opc.c.
2345 * m10300-dis.c: Rename from mn10300-dis.c
2346 * m10300-opc.c: Rename from mn10300-opc.c.
2347 * Makefile.in: Update accordingly.
2349 * mips16-opc.c: Add mul and dmul macros.
2351 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2353 * makefile.vms: Update CFLAGS, add clean target.
2355 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2357 * mips-opc.c: Add "wait". From Ralf Baechle
2358 <ralf@gnu.ai.mit.edu>.
2360 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2361 * configure, config.in: Rebuild.
2362 * sysdep.h: Include <stdlib.h> if it exists.
2363 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2365 * Makefile.in: Rebuild dependencies.
2367 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2369 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2370 Andrew Bray <andy@madhouse.demon.co.uk>.
2372 * mips-opc.c: Add cast when setting mips_opcodes.
2374 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2376 * v850-dis.c (disassemble): Fix sign extension problem.
2377 * v850-opc.c (extract_d*): Fix sign extension problems to make
2378 disassembly calculate branch offsets correctly.
2380 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2382 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2384 * mips-opc.c: Add dctr and dctw.
2386 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2388 * d30v-dis.c (print_insn): Change the way signed constants
2391 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2393 * Makefile.in (BFD_H): New variable.
2394 (HFILES): New variable.
2395 (CFILES): Add all C files.
2396 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2397 Delete old dependencies, and build new ones.
2398 * dep-in.sed: New file.
2400 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2402 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2404 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2406 * mn10200-opc.c: Change "trap" to "syscall".
2407 * mn10300-opc.c: Add new "syscall" instruction.
2409 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2411 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2412 mulul insns on the coldfire.
2414 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2416 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2417 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2418 (print_insn_little_arm): Likewise.
2420 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2422 Based on patches from H.J. Lu <hjl@lucon.org>:
2423 * i386-dis.c (fetch_data): Add prototype.
2424 * m68k-dis.c (fetch_data): Add prototype.
2425 (dummy_print_address): Add prototype. Make static.
2426 * ppc-opc.c (valid_bo): Add prototype.
2427 * sparc-dis.c (build_hash_table): Add prototype.
2428 (is_delayed_branch, compute_arch_mask): Add prototypes.
2429 (print_insn_sparc): Make several local variables const.
2430 (compare_opcodes): Change arguments to const PTR. Add prototype.
2431 * sparc-opc.c (arg): Change name field to be const.
2432 (lookup_name, lookup_value): Add prototypes. Change table and
2433 name parameters to be const.
2434 (sparc_encode_asi): Change name parameter to be const.
2435 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2436 (sparc_encode_sparclet_cpreg): Likewise.
2437 (sparc_decode_asi): Change return type to be const.
2438 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2439 (sparc_decode_sparclet_cpreg): Likewise.
2441 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2443 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2444 Solaris doesn't like the combined options, and the -f is
2446 (stamp-tshlink, install): Likewise.
2448 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2450 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2453 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2455 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2457 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2459 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2462 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2464 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2466 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2468 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2470 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2472 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2474 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2476 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2477 floatformat_to_double to make portable.
2478 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2481 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2483 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2484 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2486 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2488 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2489 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2491 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2493 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2494 (OFF_SL_BR_SCALED): ... to this, and added the flag
2495 TIC80_OPERAND_BASEREL to the flags word.
2496 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2499 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2501 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2502 Change mips_opcodes from const array to a pointer,
2503 and change bfd_mips_num_opcodes from const int to int,
2504 so that we can increase the size of the mips opcodes table
2507 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2509 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2510 store BITNUM values in the table in one's complement form
2511 to match behavior when assembler is given a raw numeric
2512 value for a BITNUM operand.
2513 * tic80-dis.c (print_operand_bitnum): Ditto.
2515 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2517 * d30v-opc.c: Removed references to FLAG_X.
2519 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2521 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2523 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2525 * Makefile.in: Added d30v object files.
2526 * configure: (bfd_d30v_arch) Rebuilt.
2527 * configure.in: (bfd_d30v_arch) Added new case.
2528 * d30v-dis.c: New file.
2529 * d30v-opc.c: New file.
2530 * disassemble.c (disassembler) Add entry for d30v.
2532 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2534 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2535 representations for the floating point BITNUM values.
2537 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2540 in the table in one's complement form, as they appear in the
2542 (tic80_symbol_to_value): Use macros to access predefined
2544 (tic80_value_to_symbol): Ditto.
2545 (tic80_next_predefined_symbol): New function.
2546 * tic80-dis.c (print_operand_bitnum): Remove code that did
2547 one's complement for BITNUM values.
2549 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2551 * makefile.vms: Remove 8 bit characters. Update to latest
2554 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2556 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2558 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2560 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2561 (IMM24_PCREL): Likewise.
2563 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2565 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2566 address for an extended PC relative instruction that is not a
2569 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2571 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2574 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2576 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2577 (tic80_opcodes): Sort entries so that long immediate forms
2578 come after short immediate forms, making it easier for
2579 assembler to select the right one for a given operand.
2581 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2583 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2585 (print_insn_mips16): Likewise.
2587 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2589 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2590 a symbol class that restricts translation to just that
2591 class (general register, condition code, etc).
2593 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2595 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2596 and REG_DEST_E for register operands that have to be
2597 an even numbered register. Add REG_FPA for operands that
2598 are one of the floating point accumulator registers.
2599 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2600 (tic80_opcodes): Change entries that need even numbered
2601 register operands to use the new operand table entries.
2602 Add "or" entries that are identical to "or.tt" entries.
2604 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2606 * mips16-opc.c: Add new cases of exit instruction for
2608 * mips-dis.c (print_mips16_insn_arg): Display floating point
2609 registers in operands of exit instruction. Print `$' before
2610 register names in operands of entry and exit instructions.
2612 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2614 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2615 pairs for all predefined symbols recognized by the assembler.
2616 Also used by the disassembling routines.
2617 (tic80_symbol_to_value): New function.
2618 (tic80_value_to_symbol): New function.
2619 * tic80-dis.c (print_operand_control_register,
2620 print_operand_condition_code, print_operand_bitnum):
2621 Remove private tables and use tic80_value_to_symbol function.
2623 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2625 * d10v-dis.c (print_operand): Change address printing
2626 to correctly handle PC wrapping. Fixes PR11490.
2628 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2630 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2633 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2635 * mips-dis.c (print_insn_mips16): Set insn_info information.
2636 (print_mips16_insn_arg): Likewise.
2638 * mips-dis.c (print_insn_mips16): Better handling of an extend
2639 opcode followed by an instruction which can not be extended.
2641 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2643 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2644 coldfire moveb instruction to not allow an address register as
2645 destination. Although the documentation does not indicate that
2646 this is invalid, experiments uncovered unexpected behavior.
2647 Added a comment explaining the situation. Thanks to Andreas
2648 Schwab for pointing this out to me.
2650 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2652 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2653 entries are presorted so that entries with the same mnemonic are
2654 adjacent to each other in the table. Sort the entries for each
2655 instruction so that this is true.
2657 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2659 * m68k-dis.c: Include <libiberty.h>.
2660 (print_insn_m68k): Sort the opcode table on the most significant
2661 nibble of the opcode.
2663 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2665 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2666 "vsub", "vst", "xnor", and "xor" instructions.
2667 (V_a1): Renamed from V_a, msb of accumulator reg number.
2668 (V_a0): Add macro, lsb of accumulator reg number.
2670 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2672 * tic80-dis.c (print_insn_tic80): Broke excessively long
2673 function up into several smaller ones and arranged for
2674 the instruction printing function to be callable recursively
2675 to print vector instructions that have both a load and a
2676 math instruction packed into a single opcode.
2677 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2678 to explain why it comes after the other vector opcodes.
2680 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2682 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2683 move insns to handle immediate operands.
2685 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2687 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2688 fix operand mask in the "moveml" entries for the coldfire.
2690 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2692 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2693 New macros for building vector instruction opcodes.
2694 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2695 FMT_LI, which were unused. The field is now a flags field.
2696 Remove some opcodes that are possible, but illegal, such
2697 as long immediate instructions with doubles for immediate
2698 values. Add "vadd" and "vld" instructions.
2700 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2702 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2703 the order more logical. Move the shift alias instructions ("rotl",
2704 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2705 interspersed with the regular sr.x and sl.x instructions. Add
2706 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2707 "sub", "subu", "swcr", and "trap".
2709 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2711 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2712 (OFF_SL_PC): Renamed from OFF_SL.
2713 (OFF_SS_BR): New operand type for base relative operand.
2714 (OFF_SL_BR): New operand type for base relative operand.
2715 (REG_BASE): New operand type for base register operand.
2716 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2717 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2718 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2720 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2721 10 char field, padded with spaces on rhs, rather than a string
2722 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2723 than old TIC80_OPERAND_RELATIVE. Add support for new
2724 TIC80_OPERAND_BASEREL flag bit.
2726 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2728 * tic80-dis.c (print_insn_tic80): Print floating point operands
2730 * tic80-opc.c (SPFI): Add single precision floating point
2731 immediate operand type.
2732 (ROTATE): Add rotate operand type for shifts.
2733 (ENDMASK): Add for shifts.
2734 (n): Macro for the 'n' bit.
2735 (i): Macro for the 'i' bit.
2736 (PD): Macro for the 'PD' field.
2737 (P2): Macro for the 'P2' field.
2738 (P1): Macro for the 'P1' field.
2739 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2742 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2744 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2745 adding in current address for pc-relative operands.
2747 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2750 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2751 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2752 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2753 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2754 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2755 (REG_SCALED, LSI_SCALED): New operand types.
2756 (E): New macro for 'E' bit at bit 27.
2757 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2758 opcodes, including the various size flavors (b,h,w,d) for
2759 the direct load and store instructions.
2761 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2763 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2765 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2766 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2767 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2768 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2769 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2770 masks with "MASK_* & ~M_*" to get the M bit reset.
2771 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2773 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2775 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2776 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2777 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2779 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2780 CC, SICR, and LICR table entries.
2781 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2782 "bcnd", and "brcr" opcodes.
2784 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2786 * ppc-opc.c (powerpc_operands): Make comment match the
2787 actual fields (no shift field).
2788 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2789 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2790 partial implementation, work in progress.
2791 * tic80-opc.c (tic80_operands): Begin construction operands table.
2792 (tic80_opcodes): Continue populating opcodes table and start
2793 filling in the operand indices.
2794 (tic80_num_opcodes): Add this.
2796 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2798 * m68k-opc.c: Add #B case for moveq.
2800 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2802 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2803 before they are used.
2805 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2807 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2808 for "breakpoint" instruction.
2810 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2812 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2813 (dep): Use ALL_CFLAGS rather than CFLAGS.
2815 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2817 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2820 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2822 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2823 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2825 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2827 * mips16-opc.c: Add "abs".
2829 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2831 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2832 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2833 (disassembler): Add bfd_arch_tic80 support to set disassemble
2834 to print_insn_tic80.
2835 * tic80-dis.c (print_insn_tic80): Add stub.
2837 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2839 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2840 * configure: Regenerate with autoconf.
2841 * tic80-dis.c: Add file.
2842 * tic80-opc.c: Add file.
2844 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2846 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2848 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2850 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2851 (mn10200_opcodes): Use it for some logicals and btst insns.
2852 Add "break" and "trap" instructions.
2854 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2856 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2858 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2860 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2861 relative load or add now depends upon whether the instruction is
2864 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2866 * mn10200-dis.c: Finish writing disassembler.
2867 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2868 Fix mask for "jmp (an)".
2870 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2871 handle endianness issues for mn10300.
2873 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2875 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2877 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2878 instruction. Fix opcode field for "movb (imm24),dn".
2880 * mn10200-opc.c (mn10200_operands): Fix insertion position
2883 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2885 * mn10200-opc.c: Create mn10200 opcode table.
2886 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2887 but moving along nicely.
2889 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2891 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2893 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2895 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2896 specifiers for fmovem* instructions.
2898 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2900 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2902 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2904 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2907 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2909 * mn10300-opc.c: Add some comments explaining the various
2912 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2914 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2916 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2919 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2920 operand specifiers in fmovm* instructions.
2922 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2924 * ppc-opc.c (insert_li): Give an error if the offset has the two
2925 least significant bits set.
2927 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2929 * mips-dis.c (print_insn_mips16): Separate the instruction from
2930 the arguments with a tab, not a space.
2932 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2937 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2940 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2942 * configure: Rebuild with autoconf 2.12.
2944 Add support for mips16 (16 bit MIPS implementation):
2945 * mips16-opc.c: New file.
2946 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2947 (mips16_reg_names): New static array.
2948 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2949 after seeing a 16 bit symbol.
2950 (print_insn_little_mips): Likewise.
2951 (print_insn_mips16): New static function.
2952 (print_mips16_insn_arg): New static function.
2953 * mips-opc.c: Add jalx instruction.
2954 * Makefile.in (mips16-opc.o): New target.
2955 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2956 * configure: Rebuild.
2958 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2960 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2961 operand specifiers in *save, *restore and movem* instructions.
2963 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2966 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2967 register operands for immediate arithmetic, not, neg, negx, and
2968 set according to condition instructions.
2970 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2971 specifier of the effective-address operand in immediate forms of
2972 arithmetic instructions. The specifier for the immediate operand
2973 notes how and where the constant will be stored.
2975 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2977 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2980 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2983 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2985 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2987 * mn10300-dis.c (disassemble): Handle register lists.
2989 * mn10300-opc.c: Fix handling of register list operand for
2990 "call", "ret", and "rets" instructions.
2992 * mn10300-dis.c (disassemble): Print PC-relative and memory
2993 addresses symbolically if possible.
2994 * mn10300-opc.c: Distinguish between absolute memory addresses,
2995 pc-relative offsets & random immediates.
2997 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2999 (disassemble): Handle SPLIT and EXTENDED operands.
3001 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3003 * mn10300-dis.c: Rough cut at printing some operands.
3005 * mn10300-dis.c: Start working on disassembler support.
3006 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3008 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3010 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3012 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3014 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3016 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3018 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3019 register argument is calls and jmp instructions.
3021 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3023 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3024 getx operand. Fix opcode for mulqu imm,dn.
3026 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3029 in MN10300_OPERAND_SPLIT operands for how many bits
3030 appear in the basic insn word. Add IMM32_HIGH24,
3031 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3032 (mn10300_opcodes): Use new operands as needed.
3034 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3035 for bset, bclr, btst instructions.
3036 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3038 * mn10300-opc.c (mn10300_operands): Remove many redundant
3039 operands. Update opcode table as appropriate.
3040 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3041 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3043 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3045 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3046 operands (for indexed load/stores). Fix bitpos for DI
3047 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3048 few instructions that insert immediates/displacements in the
3049 middle of the instruction. Add IMM8E for 8 bit immediate in
3050 the extended part of an instruction.
3051 (mn10300_operands): Use new opcodes as appropriate.
3053 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3055 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3056 sequential so the assembler never parallelizes it with
3059 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3061 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3062 a data/address register that appears in register field 0
3063 and register field 1.
3064 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3066 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3068 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3069 standard disassembly.
3071 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3072 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3073 Recategorize PALcode instructions.
3075 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3077 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3079 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3081 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3082 there are no operand types.
3084 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3086 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3088 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3090 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3092 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3094 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3097 and sst.w instructions.
3099 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3102 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3104 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3107 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3109 * ppc-opc.c (PPCPWR2): Define.
3110 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3113 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3115 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3116 field for movhu instruction.
3118 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3119 cast value to "long" not "signed long" to keep hpux10
3122 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3124 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3127 * mn10300-opc.c (FMT*): Remove definitions.
3129 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3130 for shift-by-register opcodes.
3132 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3133 into [AD][MN][01] for encoding the position of the register
3136 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3138 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3139 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3141 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3143 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3144 Fix various typos. Add "PAREN" operand.
3145 (MEM, MEM2): Define.
3146 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3147 operands. Fix several typos.
3149 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3152 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3154 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3155 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3157 (mn10300_opcodes): Break opcode format out into its own field.
3158 Update many operand fields to deal with signed vs unsigned
3159 issues. Fix one or two typos in the "mov" instruction
3160 opcode, mask and/or operand fields.
3162 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3164 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3165 m68851 wasn't reset.
3167 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3169 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3170 all opcodes. Very rough cut at operands for all opcodes.
3172 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3175 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3177 * mn10200-opc.c, mn10300-opc.c: New files.
3178 * mn10200-dis.c, mn10300-dis.c: New files.
3179 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3180 * disassemble.c: Break mn10x00 support into 10200 and 10300
3182 * configure.in: Likewise.
3183 * configure: Rebuilt.
3185 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3187 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3189 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3191 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3193 * disassemble (ARCH_mn10x00): Define.
3194 (disassembler): Handle bfd_arch_mn10x00.
3195 * configure.in: Recognize bfd_mn10x00_arch.
3196 * configure: Rebuilt.
3198 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3200 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3201 accordingly. Don't declare functions using op_rtn.
3203 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3205 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3206 params to be more standard.
3207 * (disassemble): Print absolute addresses and symbolic names for
3208 branch and jump targets.
3209 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3211 * (v850_opcodes): Add breakpoint insn.
3213 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3215 * m68k-opc.c: Move the fmovemx data register cases before the
3216 other cases, so that they get recognized before the data register
3217 does gets treated as a degenerate register list.
3219 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3221 * mips-opc.c: Add a case for "div" and "divu" with two registers
3222 and a destination of $0.
3224 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3226 * mips-dis.c (print_insn_arg): Add prototype.
3227 (_print_insn_mips): Ditto.
3229 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * mips-dis.c (print_insn_arg): Print condition code registers as
3234 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3236 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3238 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3240 * v850-dis.c (disassemble): Make static. Provide prototype.
3242 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3244 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3247 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3249 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3250 ']' characters into the output stream.
3251 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3252 Add "memop" field to all opcodes (for the disassembler).
3253 Reorder opcodes so that "nop" comes before "mov" and "jr"
3254 comes before "jarl".
3256 * v850-dis.c (print_insn_v850): Fix typo in last change.
3258 * v850-dis.c (print_insn_v850): Properly handle disassembling
3259 a two byte insn at the end of a memory region when the memory
3260 region's size is only two byte aligned.
3262 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3264 * v850-dis.c (v850_reg_names): Define.
3265 (v850_sreg_names, v850_cc_names): Likewise.
3266 (disassemble): Very rough cut at printing operands (unformatted).
3268 * v850-opc.c (BOP_MASK): Fix.
3269 (v850_opcodes): Fix mask for jarl and jr.
3271 * v850-dis.c: New file. Skeleton for disassembler support.
3272 * Makefile.in Remove v850 references, they're not needed here.
3273 * configure.in: Add v850-dis.o when building v850 toolchains.
3274 * configure: Rebuilt.
3275 * disassemble.c (disassembler): Call v850 disassembler.
3277 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3278 (insert_d8_6, extract_d8_6): New functions.
3279 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3280 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3282 (IF4A, IF4B): Use "D7" instead of "D7S".
3283 (IF4C, IF4D): Use "D8_7" instead of "D8".
3284 (IF4E, IF4F): New. Use "D8_6".
3285 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3286 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3288 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3289 (v850_operands): Change D16 to D16_15, use special insert/extract
3290 routines. New new D16 that uses the generic insert/extract code.
3291 (IF7A, IF7B): Use D16_15.
3292 (IF7C, IF7D): New. Use D16.
3293 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3295 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3296 message. Issue an error if the branch offset is odd.
3298 * v850-opc.c: Add notes about needing special insert/extract
3299 for all the load/store insns, except "ld.b" and "st.b".
3301 * v850-opc.c (insert_d22, extract_d22): New functions.
3302 (v850_operands): Use insert_d22 and extract_d22 for
3304 (insert_d9): Fix range check.
3306 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3308 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3309 and set bits field to D9 and D22 operands.
3311 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3313 * v850-opc.c (v850_operands): Define SR2 operand.
3314 (v850_opcodes): "ldsr" uses R1,SR2.
3316 * v850-opc.c (v850_opcodes): Fix opcode specs for
3317 sld.w, sst.b, sst.h, sst.w, and nop.
3319 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3321 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3322 end of the opcode table.
3324 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3326 * d10v-opc.c (pre_defined_registers): Added register pairs,
3327 "r0-r1", "r2-r3", etc.
3329 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3331 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3332 Create I16U for an unsigned 16bit mmediate operand.
3333 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3335 * v850-opc.c (v850_operands): Define EP operand.
3336 (IF4A, IF4B, IF4C, IF4D): Use EP.
3338 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3339 with immediate operand, "movhi". Tweak "ldsr".
3341 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3342 correct. Get sld.[bhw] and sst.[bhw] closer.
3344 * v850-opc.c (v850_operands): "not" is a two byte insn
3346 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3348 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3350 * v850-opc.c (two): Get order of words correct.
3352 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3354 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3355 register source and destination operands.
3356 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3358 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3359 same thinko in "trap" opcode.
3361 * v850-opc.c (v850_opcodes): Add initializer for size field
3364 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3365 Add D8 for 8-bit unsigned field in short load/store insns.
3366 (IF4A, IF4D): These both need two registers.
3367 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3368 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3369 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3370 for "ldsr" and "stsr".
3371 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3374 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3375 short store word (sst.w).
3377 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3379 * v850-opc.c (v850_operands): Added insert and extract fields,
3380 pointers to functions that handle unusual operand encodings.
3382 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3384 * v850-opc.c (v850_opcodes): Enable "trap".
3386 * v850-opc.c (v850_opcodes): Fix order of displacement
3387 and register for "set1", "clr1", "not1", and "tst1".
3389 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3391 * v850-opc.c (v850_operands): Add "B3" support.
3392 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3395 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3397 * v850-opc.c: Close unterminated comment.
3399 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3401 * v850-opc.c (v850_operands): Add flags field.
3402 (v850_opcodes): add move opcodes.
3404 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3406 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3407 * configure: (bfd_v850v_arch) Add new case.
3408 * configure.in: (bfd_v850_arch) Add new case.
3409 * v850-opc.c: New file.
3411 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3413 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3415 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3417 * d10v-opc.c: Add additional information to the opcode
3418 table to help determinine which instructions can be done
3421 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3423 * mpw-make.sed: Update editing of include pathnames to be
3426 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3428 * arm-opc.h: Added "bx" instruction definition.
3430 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3432 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3434 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3436 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3438 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3440 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3442 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3444 * makefile.vms: Update for alpha-opc changes.
3446 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3448 * i386-dis.c (print_insn_i386): Actually return the correct value.
3449 (ONE, OP_ONE): #ifdef out; not used.
3451 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3453 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3454 Changed subi operand type to treat 0 as 16.
3456 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3458 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3461 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3463 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3464 memory transfer instructions. Add new format string entries %h and %s.
3465 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3468 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3470 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3471 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3473 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3475 * alpha-dis.c (print_insn_alpha_osf): Remove.
3476 (print_insn_alpha_vms): Remove.
3477 (print_insn_alpha): Make globally visible. Chose the register
3478 names based on info->flavour.
3479 * disassemble.c: Always return print_insn_alpha for the alpha.
3481 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3483 * d10v-dis.c (dis_long): Handle unknown opcodes.
3485 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3487 * d10v-opc.c: Changes to support signed and unsigned numbers.
3488 All instructions with the same name that have long and short forms
3489 now end in ".l" or ".s". Divs added.
3490 * d10v-dis.c: Changes to support signed and unsigned numbers.
3492 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3494 * d10v-dis.c: Change all functions to use info->print_address_func.
3496 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3498 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3499 move ccr/sr insns more strict so that the disassembler only
3500 selects them when the addressing mode is data register.
3502 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3503 * d10v-opc.c (pre_defined_registers): Declare.
3504 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3505 to pick a better name for the registers.
3507 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3509 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3510 operands for fexpand and fpmerge. From Christian Kuehnke
3511 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3513 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3515 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3516 print routine. Take new regnames and cpumask arguments.
3517 Kill the environment variable nonsense.
3518 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3519 (print_insn_alpha_vms): New function. Do VMS style regnames.
3520 * disassemble.c (disassembler): Test bfd flavour to pick
3521 between OSF and VMS routines. Default to OSF.
3523 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3526 * configure: Rebuild.
3527 * Makefile.in (install): Use @INSTALL_SHLIB@.
3529 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3531 * configure: (bfd_d10v_arch) Add new case.
3532 * configure.in: (bfd_d10v_arch) Add new case.
3533 * d10v-dis.c: New file.
3534 * d10v-opc.c: New file.
3535 * disassemble.c (disassembler) Add entry for d10v.
3537 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3539 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3540 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3542 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3544 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3545 distinguish between variants of the instruction set.
3546 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3547 distinguish between variants of the instruction set.
3549 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3551 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3552 the 8086 instruction set.
3553 * i386-dis.c: General cleanups. Make most things static. Add
3554 prototypes. Get rid of static variables aflags and dflags. Pass
3555 them as args (to almost everything).
3557 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3559 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3561 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3563 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3564 if the next arg is marked with SRC_IN_DST. Gross.
3566 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3567 we're looking for and find EXR.
3569 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3570 if we're looking for KBIT and we don't find it.
3572 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3575 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3576 3bit immediate operands.
3578 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * Released binutils 2.7.
3582 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3583 <kkaempf@progis.ac-net.de>.
3585 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3587 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3589 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3591 * sparc-dis.c (print_insn_sparclite): New routine to print
3592 sparclite instructions.
3594 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3596 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3598 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3600 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3601 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3602 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3604 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3606 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3607 Use autoconf-set values.
3608 (docdir, oldincludedir): Removed.
3609 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3611 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3613 * alpha-opc.c: New file.
3614 * alpha-opc.h: Remove.
3615 * alpha-dis.c: Complete rewrite to use new opcode table.
3616 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3617 * configure: Rebuild with autoconf 2.10.
3618 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3619 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3621 (alpha-opc.o): New target.
3623 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3625 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3626 Set imm_added_to_rs1 even if the source and destination register
3629 * sparc-opc.c: Add some two operand forms of the wr instruction.
3631 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3633 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3636 * disassemble.c (disassembler): Handle H8/S.
3637 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3639 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3641 * sparc-opc.c: Add beq/teq as aliases for be/te.
3643 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3644 <sergei@msil.sps.mot.com>.
3646 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3648 * makefile.vms: New file.
3650 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3652 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3654 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3657 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3659 * i386-dis.c (OP_OFF): Call append_prefix.
3661 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3663 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3664 unsigned long to silence a warning from the Solaris PowerPC
3667 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3669 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3671 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3673 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3675 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3676 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3677 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3678 cpush, cpusha, cpull sparclet insns.
3680 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3682 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3684 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3686 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3687 Set F_FLOAT on other floating point instructions.
3689 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3691 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3693 (powerpc_opcodes): Add 860/821 specific SPRs.
3695 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3697 * configure.in: Permit --enable-shared to specify a list of
3698 directories. Set and substitute BFD_PICLIST.
3699 * configure: Rebuild.
3700 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3701 uses. Set to @BFD_PICLIST@.
3703 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3705 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3706 not "abs", which may be needed for the absolute in something
3707 like btst #0,@10:8. Print L_3 immediates separately from other
3708 immediates. Change ABSMOV reference to ABS8MEM.
3710 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3712 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3713 (current_arch_mask): New static global.
3714 (compute_arch_mask): New static function.
3715 (print_insn_sparc): Delete sparc_v9_p. New static local
3716 current_mach. Resort opcode table if current_mach changes.
3717 Generalize "insn not supported" test.
3718 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3719 Delete test for v9/!v9.
3720 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3722 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3723 (brfcx): Renamed to FBRX.
3724 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3725 coprocessor mnemonics are not supported on the sparclet).
3726 (condf): Renamed to CONDF.
3727 (SLCBCC2): Delete F_ALIAS flag.
3729 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3731 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3732 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3734 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3736 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3737 that the shared library version number is set correctly.
3739 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3741 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3742 Miles Bader <miles@gnu.ai.mit.edu>.
3743 * configure: Rebuild.
3745 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3747 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3750 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3752 * configure: Rebuild with autoconf 2.8.
3754 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3756 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3757 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3759 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3761 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3762 since they appear as targets in Makefile.in.
3763 * configure: Rebuild.
3765 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3767 * mpw-make.sed: Edit out shared library support bits.
3769 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3771 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3772 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3773 (sparc_opcodes): Add sparclet insns.
3774 (sparclet_cpreg_table): New static local.
3775 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3776 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3778 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3780 * i386-dis.c (index16): New static variable.
3781 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3783 (OP_indirE): Return result of OP_E.
3784 (OP_E): Check for 16 bit addressing mode, and disassemble
3785 correctly. Optimised 32 bit case a little. Don't print
3786 "(base,index,scale)" when sib specifies only an offset.
3788 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3790 * configure.in: Set and substitute SHLIB_DEP.
3791 * configure: Rebuild.
3792 * Makefile.in (SHLIB_DEP): New variable.
3793 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3794 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3795 COMMON_SHLIB, add them to piclist with appropriate modifications.
3796 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3797 here: just use piclist.
3799 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3801 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3802 (print_insn_sparc): Rewrite v9/not-v9 tests.
3803 (compare_opcodes): Likewise.
3804 * sparc-opc.c (MASK_<ARCH>): Define.
3805 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3806 (sparclet,v6notv9): Define.
3807 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3808 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3810 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3812 * configure.in: Call AC_PROG_CC before configure.host.
3813 * configure: Rebuild.
3815 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3817 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3819 * i386-dis.c (onebyte_has_modrm): New static array.
3820 (twobyte_has_modrm): New static array.
3821 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3823 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3825 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3828 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3830 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3833 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3835 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3836 m68010up, not just m68020up | cpu32.
3838 * Makefile.in (SONAME): New variable.
3839 ($(SHLINK)): Make a link to the transformed name, as well.
3840 (stamp-tshlink): New target.
3841 (install): Skip stamp-tshlink during install.
3843 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3845 * configure.in: Call AC_ARG_PROGRAM.
3846 * configure: Rebuild.
3847 * Makefile.in (program_transform_name): New variable.
3848 (install): Transform library name before installing it.
3850 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3852 * i960-dis.c (mem): Add HX dcinva instruction.
3854 Support for building as a shared library, based on patches from
3855 Alan Modra <alan@spri.levels.unisa.edu.au>:
3856 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3857 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3858 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3859 * configure: Rebuild.
3860 * Makefile.in (ALLLIBS): New variable.
3861 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3862 (COMMON_SHLIB, SHLINK): New variables.
3863 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3864 (STAGESTUFF): Remove variable.
3865 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3866 (stamp-piclist, piclist): New targets.
3867 ($(SHLIB), $(SHLINK)): New targets.
3868 ($(OFILES)): Depend upon stamp-picdir.
3869 (disassemble.o): Build twice if PICFLAG is set.
3870 (MOSTLYCLEAN): Add pic/*.o.
3871 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3872 (distclean): Remove pic and stamp-picdir.
3873 (install): Install shared libraries.
3874 (stamp-picdir): New target.
3876 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3878 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3879 Print unknown instruction as "unknown", rather than in hex.
3881 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3883 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3885 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3887 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3889 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3891 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3892 when necessary. From Ulrich Drepper
3893 <drepper@myware.rz.uni-karlsruhe.de>.
3895 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3897 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3898 sparc_num_opcodes. Update architecture enum values.
3899 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3900 (sparc_opcode_lookup_arch): New function.
3901 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3902 (sparc_opcodes): Add v9a shutdown insn.
3904 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3906 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3907 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3909 (print_insn_sparc64): Deleted.
3910 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3913 * sparc-opc.c (architecture_pname): Add v9a.
3915 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3917 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3918 incorrectly defined as 0x16 when it should be 0x15.
3919 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3920 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3921 excb (exception barrier) which is defined in the Alpha
3922 Architecture Handbook version 2.
3923 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3924 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3925 disassembled as or, for example.
3927 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3929 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3930 (_print_insn_mips): Change i from int to unsigned int.
3932 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3934 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3935 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3937 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3939 * i386-dis.c: Added Pentium Pro instructions.
3941 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3943 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3946 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3948 * sh-opc.h (sh_nibble_type): Added REG_B.
3949 (sh_arg_type): Added A_REG_B.
3950 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3952 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3954 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3956 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3958 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3960 * Makefile.in (distclean): Remove stamp-h. From Ronald
3961 F. Guilmette <rfg@monkeys.com>.
3963 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3965 From David Mosberger-Tang <davidm@azstarnet.com>:
3966 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3969 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3971 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3972 (sh_table): Added many SH3 opcodes.
3973 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3975 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3977 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3978 (subco,subco.): Mark this PPC, not PPCCOM.
3980 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3982 * configure: Rebuild with autoconf 2.7.
3984 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3986 * configure: Rebuild with autoconf 2.6.
3988 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3990 * configure.in: Sort list of architectures. Accept but do nothing
3991 for alliant, convex, pyramid, romp, and tahoe.
3993 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3995 * a29k-dis.c (print_special): Change num to unsigned int.
3997 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3999 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4002 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4004 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4005 * configure: Rebuilt.
4007 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4009 * configure.in: Add case for bfd_i860_arch.
4010 * configure: Rebuild.
4012 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4014 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4015 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4016 (NEXTDOUBLE): Likewise.
4017 (print_insn_m68k): Don't match fmoveml if there is more than one
4018 register in the list.
4019 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4021 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4023 * m68k-opc.c: Use #W rather than #w.
4024 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4026 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4028 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4029 and likewise for all the dbxx opcodes.
4031 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4033 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4035 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4037 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4038 the VR4100 specific instructions to the mips_opcodes structure.
4040 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4042 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4043 ugly Metrowerks bug in CW6, is fixed in CW7.
4045 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4047 * ppc-opc.c (whole file): Add flags for common/any support.
4049 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4051 * Makefile.in (BISON): Remove macro.
4052 (FLAGS_TO_PASS): Remove BISON.
4054 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4056 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4058 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4059 instructions that take no args by looking at the match mask.
4060 (print_insn_arg): Always print "%" before register names.
4061 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4062 [case '_']: Don't print "@#" before address.
4063 [case 'J']: Use "%s" as format string, not register name.
4064 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4066 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4068 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4071 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4073 From David Mosberger-Tang <davidm@azstarnet.com>
4075 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4076 (alpha_insn_set): added definitions for VAX floating point
4077 instructions (Unix compilers don't generate these, but handcoded
4078 assembly might still use them).
4080 * alpha-dis.c (print_insn_alpha): added support for disassembling
4081 the miscellaneous instructions in the Alpha instruction set.
4083 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4085 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4086 no longer create sysdep.h, sed ppc-opc.c to work around a
4087 serious Metrowerks C bug.
4088 * mpw-make.in: Remove.
4089 * mpw-make.sed: New file, used by mpw-configure to edit
4090 Makefile.in into an MPW makefile.
4092 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * Makefile.in (maintainer-clean): New synonym for realclean.
4096 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4098 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4099 which use '0', '1', and '2' instead. Specify the proper size for
4100 a pmove immediate operand. Correct the pmovefd patterns to be
4101 moves to a register, not from a register.
4102 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4104 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4106 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4107 %psr, %wim, %tbr as F_NOTV9.
4109 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4111 * Makefile.in (Makefile): Just rebuild Makefile when running
4113 (config.h, stamp-h): New targets.
4114 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4115 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4116 rebuilding config.h.
4117 * configure: Rebuild.
4119 * mips-opc.c: Change unaligned loads and stores with "t,A"
4120 operands to use "t,A(b)".
4122 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4124 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4126 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4128 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4129 until 3 instead of until 2.
4131 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4133 * Makefile.in (ALL_CFLAGS): Define.
4134 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4135 (MOSTLYCLEAN): Add config.log.
4136 (distclean): Don't remove config.log.
4137 * configure.in: Substitute HDEFINES.
4138 * configure: Rebuild.
4140 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4142 * sh-opc.h (sh_arg_type): Add F_FR0.
4143 (sh_table, case fmac): Add F_FR0 as first argument.
4145 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4147 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4149 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4151 * sparc-dis.c: Remove all references to NO_V9.
4153 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4155 * aclocal.m4: Just include ../bfd/aclocal.m4.
4156 * configure: Rebuild.
4158 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4160 * sparc-dis.c (X_DISP19): Define.
4161 (print_insn, case 'G'): Use it.
4162 (print_insn, case 'L'): Sign extend displacement.
4164 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4166 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4167 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4168 host_makefile_frag or frags.
4169 * aclocal.m4: New file.
4170 * configure: Rebuild.
4171 * Makefile.in (INSTALL): Set to @INSTALL@.
4172 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4173 (INSTALL_DATA): Set to @INSTALL_DATA@.
4175 (AR_FLAGS): Set to rc rather than qc.
4176 (CC): Define as @CC@.
4177 (CFLAGS): Set to @CFLAGS@.
4178 (@host_makefile_frag@): Remove.
4179 (config.status): Remove dependency upon @frags@.
4181 * configure.in: ../bfd/config.bfd now just sets shell variables.
4182 Use them rather than looking through target Makefile fragments.
4183 * configure: Rebuild.
4185 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4187 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4189 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4191 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4192 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4195 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4196 (lookup_{name,value}): New functions.
4197 (prefetch_table): New static local.
4198 (sparc_{encode,decode}_prefetch): New functions.
4199 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4201 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4203 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4206 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4208 * sh-dis.c: Correct comment on first line of file.
4210 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4212 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4214 * sparc-opc.c (asi, membar): New static locals.
4215 (sparc_{encode,decode}_{asi,membar}): New functions.
4216 (sparc_opcodes, membar insn): Fix.
4217 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4218 Support decoding of membar masks.
4221 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4223 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4225 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4227 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4228 and likewise for the other branches. Add bhs as an alias for bcc,
4229 and likewise for the size variants. Add dbhs as an alias for
4232 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4234 * sh-opc.h (FP sts instructions): Update to match reality.
4236 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4238 * m68k-dis.c: (fpcr_names): Add % before all register names.
4239 (reg_names): Likewise.
4240 (print_insn_arg): Don't explicitly print % before register names.
4241 Add % before register names in static array names. In case 'r',
4242 print data registers as `@(Dn)', not `Dn@'. When printing a
4243 memory address, don't print @# before it.
4244 (print_indexed): Change base_disp and outer_disp from int to
4245 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4246 syntax. Sign extend 8 byte displacement correctly.
4247 (print_base): Print using MIT syntax. Print zpc when appropriate.
4248 Change parameter disp from int to bfd_vma.
4250 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4253 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4255 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4256 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4257 * sh-opc.h (sh_arg_type): Add new operand types.
4258 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4260 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4262 * Makefile.in (distclean): Remove generated file config.h.
4264 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4266 * Makefile.in (distclean): Remove generated file config.h.
4268 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4270 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4272 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4274 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4275 rather than numopcodes. Use m68k_opcodes rather than removed
4276 opcode function. Don't check F_ALIAS.
4277 (print_insn_arg): Change first parameter to be const char *.
4278 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4279 (m68k-opc.o): New target.
4280 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4281 * configure: Rebuild.
4283 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4285 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4286 (opcode_bits, opcode_hash_table): New variables.
4287 (opcodes_initialized): Renamed from opcodes_sorted.
4288 (build_hash_table): New function.
4289 (is_delayed_branch): Use hash table.
4290 (print_insn): Renamed from print_insn_sparc, made static.
4291 Build and use hash table. If !sparc64, ignore sparc64 insns,
4292 and vice-versa if sparc64.
4293 (print_insn_sparc, print_insn_sparc64): New functions.
4294 (compare_opcodes): Move sparc64 opcodes to end.
4295 Print commutative insns with constant second.
4296 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4298 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4300 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4301 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4302 avoids printing a delay slot in a delay slot.
4303 * sh-opc.h (sh_table): Fully bracket last entry.
4305 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4307 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4309 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4311 * configure.in: Get host_makefile_frag from ${srcdir}.
4313 * configure.in: Autoconfiscated. Check for string[s].h. Create
4314 config.h from config.in. Don't set up sysdep.h link.
4315 * sysdep.h: New file.
4316 * configure, config.in: New files, generated from configure.in.
4317 * Makefile.in: Updated to be processed autoconf-style.
4318 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4319 (Makefile): Depend on config.status.
4320 (config.status): New rule.
4321 * configure.bat: Update Makefile substitutions.
4323 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4325 * mips-opc.c (L1): Define.
4326 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4327 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4330 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4332 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4333 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4334 have multiple add units but only a single logical unit.
4336 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4337 shifted by 18, without any insertion or extraction function.
4338 (insert_cr, extract_cr): Remove.
4340 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4342 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4345 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4347 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4348 * sh-opc.h: Add copyright.
4350 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4352 * Makefile.in (crunch-m68k): Delete extra target accidentally
4353 checked in a while ago.
4355 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4357 * sh-opc.h (sh_table): Add SH3 support.
4359 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4361 * sh-opc.h: Added bsrf and braf.
4363 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4365 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4366 bogus [ls]fm{ea,fd} patterns.
4368 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4369 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4370 initialize it from memory. Make function static.
4371 (print_insn_{big,little}_arm): New functions.
4372 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4373 the correct endianness.
4375 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4377 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4380 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4382 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4383 17th, so that it builds again using GCC as the compiler.
4385 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4387 * mips-dis.c (print_insn_little_mips): Cast return value from
4388 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4389 expects an unsigned long, and that might be fewer words of
4390 argument storage (e.g., if bfd_vma is long long on a 32-bit
4392 (print_insn_big_mips): Likewise with bfd_getb32 value.
4393 (_print_insn_mips): Now static.
4395 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4397 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4398 gcc memory hog problem with initializer is fixed.
4400 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4402 Merge in support for Mac MPW as a host.
4403 (Old change descriptions retained for informational value.)
4405 * mpw-config.in (archname): Compute from the config.
4406 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4408 * mpw-config.in (target_arch): Compute from canonical target.
4409 (m68k, mips, powerpc, sparc): Add architectures.
4410 * mpw-make.in (disassemble.c.o): Add.
4411 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4413 * mpw-config.in (BFD_MACHINES): Set to a default value.
4414 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4416 * mpw-make.in (CSEARCH): Add extra-include to search path.
4418 * mpw-config.in (varargs.h): Don't create.
4419 (sysdep.h): Create using forward-include.
4420 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4422 * mpw-config.in: New file, MPW version of configure.in.
4423 * mpw-make.in: New file, MPW version of Makefile.in.
4425 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4427 * alpha-dis.c (print_insn_alpha): Put empty statement after
4430 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4432 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4433 (low_sign_extend): Likewise.
4434 (get_field): Delete unused function.
4435 (set_field, deposit_14, deposit_21): Likewise.
4437 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4439 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4442 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4444 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4446 * alpha-opc.h (OSF_ASMCODE): define
4447 print pal-code names as defined in App C of the
4448 Alpha Architecture Reference Manual
4450 * alpha-dis.c: cleaned up output
4451 print stylized code forms as defined in App A.4.3 of the
4452 Alpha Architecture Reference Manual
4454 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4456 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4458 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4461 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4463 * m68k-dis.c (opcode): New function. Returns address of opcode
4464 table entry given index, even if the opcode table was split to
4465 work around gcc bugs.
4466 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4468 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4469 (reg_names): Now const.
4470 (print_insn_arg): Arrays cacheFieldName and names now const.
4471 (print_indexed): Array scales now const.
4473 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4475 * ppc-opc.c: Sort recently added instructions by minor opcode
4476 number within major opcode number.
4478 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4480 * hppa-dis.c: Include libhppa.h.
4482 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4484 * mips-opc.c: Change dli to use M_DLI, and add dla.
4486 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4488 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4490 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4492 * mips-opc.c: Add r4650 mul instruction.
4494 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4496 * mips-opc.c: Add uld and usd macros for unaligned double load and
4499 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4501 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4502 mfdcr, mtdcr, icbt, iccci.
4504 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4506 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4507 signed char fields to shorts, more portable.
4509 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4511 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4512 char fields as signed chars, since they may have negative values.
4514 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4516 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4517 (mycroft@netbsd.org).
4519 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4521 From "Logg, Ed" <elogg@ea.com>:
4522 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4523 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4526 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4528 * ppc-opc.c: Changes based on patch from David Edelsohn
4529 <edelsohn@mhpcc.edu>.
4530 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4533 (insert_tbr): New static function.
4534 (extract_tbr): New static function.
4535 (XFXFXM_MASK, XFXM): Define.
4536 (XSPRBAT_MASK, XSPRG_MASK): Define.
4537 (powerpc_opcodes): Add instructions to access special registers by
4538 name. Add mtcr and mftbu.
4540 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4542 * mips-opc.c (P3): Define.
4543 (mips_opcodes): Add mad and madu.
4545 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4547 * configure.in: Add W65 support.
4548 * disassemble.c: Likewise.
4549 * w65-opc.h, w65-dis.c: New files.
4551 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4553 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4556 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4558 * mips-opc.c: Add dli as a synonym for li.
4560 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4562 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4563 print something for reserved opcode values, even if it won't
4566 * mips-dis.c (_print_insn_mips): When initializing, shift right
4567 and mask, to avoid sign extension problems on the Alpha.
4569 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4572 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4574 * sh-opc.h (mov.l gbr): Get direction right.
4575 * sh-dis.c (print_insn_shx): New function.
4576 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4577 print opcodes with right byte order.
4579 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4581 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4582 to avoid conflicts with getopt.
4584 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4586 * hppa-dis.c (print_insn_hppa): Read the instruction using
4587 bfd_getb32, so that it works on a little endian or 64 bit host.
4588 Remove unused local variable op.
4590 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4592 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4593 addu does not work correctly if -mips3.
4595 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4597 * a29k-dis.c (print_special): Add special register names defined
4598 on 29030, 29040 and 29050.
4599 (print_insn): Handle new operand type 'I'.
4601 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4603 * Makefile.in (INSTALL): Use top level install.sh script.
4605 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4607 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4608 that it works on a little endian host.
4610 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4612 * configure.in: Use ${config_shell} when running config.bfd.
4614 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4616 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4618 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4620 * a29k-dis.c (print_insn): Print the opcode.
4622 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4624 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4626 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4628 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4630 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4632 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4633 which store a value into memory.
4635 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4637 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4638 * arm-dis.c, arm-opc.h: New files.
4640 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4642 * Makefile.in (ns32k-dis.o): Add dependency.
4643 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4644 string, not as array of chars.
4646 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4648 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4650 * sparc-opc.c: Added sparclite extended FP operations, and
4651 versions of v9 impdep* instructions permitting specification of
4654 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4656 * i960-dis.c (reg_names): Now const.
4657 (struct sparse_tabent): New type, copied from array type in mem
4659 (ctrl): Local static array ctrl_tab now const.
4660 (cobr): Local static array cobr_tab now const.
4661 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4662 static variable mem_tab no longer explicitly initialized. Changed
4663 mem_init to const array of struct sparse_tabent.
4664 (reg): Local static variable reg_tab no longer explicitly
4665 initialized. Changed reg_init to const array of struct
4667 (ea): Local static array scale_tab now const.
4669 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4672 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4674 * configure.bat: the disassember needs to be enabled for
4675 "objdump -d" to work in djgpp.
4677 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4679 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4680 (invalid_float): Enabled general version, doesn't require running
4681 on ns32k host. Changed to take char* argument, and test for
4682 explicitly specified sizes, instead of using sizeof() on host CPU
4684 (INVALID_FLOAT): Cast first argument.
4685 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4686 list_P032, list_M032): Now const.
4687 (optlist, list_search): Made appropriate arguments now point to
4689 (print_insn_arg): Changed static array of one-character-string
4690 pointers into a static const array of characters; fixed sprintf
4691 statement accordingly.
4693 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4695 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4696 from distribution. A ns32k-dis.c from a previous distribution has
4697 been brought up to date and supports the new interface.
4699 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4701 * configure.in: add bfd_ns32k_arch target support.
4703 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4704 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4706 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4708 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4711 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4713 * h8300-dis.c, mips-dis.c: Don't use true and false.
4715 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4717 * configure.in: Change --with-targets to --enable-targets.
4719 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4721 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4722 opcodes to the first instruction with that opcode, to speed
4723 disassembly of large files. From ralphc@pyramid.com (Ralph
4726 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4728 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4730 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4732 * configure.bat: update to latest makefile.in
4734 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4736 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4737 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4738 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4739 slot insn is in a delay slot.
4740 * z8k-opc.h: (resflg): Fix patterns.
4741 * h8500-opc.h Fix CR insn patterns.
4743 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4745 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4746 "cmpl" before POWER versions, so that gas -many uses them.
4748 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4750 * disassemble.c: New file.
4751 * Makefile.in (OFILES): Add disassemble.o.
4752 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4753 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4754 binutils/configure.in.
4756 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4757 opcode being examined.
4759 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4761 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4762 (insert_ral, insert_ram, insert_ras): New functions.
4763 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4764 RAS for store with update.
4766 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4768 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4769 (edelsohn@npac.syr.edu).
4771 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4776 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4778 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4780 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4782 * ppc-opc.c (powerpc_operands): The signedp field has been
4783 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4784 instead. Add new operand SISIGNOPT.
4785 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4786 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4787 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4790 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4792 * i386-dis.c (struct private): Renamed to dis_private. `private'
4793 is a reserved word for dynix cc.
4795 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4797 * configure.in: Change error message to refer to bfd/config.bfd
4798 rather than bfd/configure.in.
4800 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4802 * ppc-opc.c: Define POWER2 as short alias flag.
4803 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4806 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4808 * i960-dis.c (print_insn_i960): Don't read a second word for
4809 opcodes 0, 1, 2 and 3.
4811 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4813 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4815 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4817 * m68881-ext.c: Removed; no longer used.
4818 * Makefile.in: Changed accordingly.
4820 * m68k-dis.c (ext_format_68881): Don't declare.
4821 (print_insn_m68k): If an instruction uses place 'i', it uses at
4822 least four fixed bytes.
4823 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4824 extended float, convert to double using floatformat_to_double, not
4825 ieee_extended_to_double, and fetch the data before converting it.
4827 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4829 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4830 davidj@ICSI.Berkeley.EDU (David Johnson).
4832 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4835 PowerPC uses bdnz[l][a].
4837 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4839 * dis-buf.c, i386-dis.c: Include sysdep.h.
4841 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4843 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4845 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4846 by Motorola PowerPC 601 with PPC_OPCODE_601.
4847 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4848 Disassemble Motorola PowerPC 601 instructions as well as normal
4849 PowerPC instructions.
4851 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4853 * i960-dis.c (reg, mem): Just use a static array instead of
4856 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4858 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4859 condition name index if this is for a negated condition.
4861 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4862 Floating point format for 'H' operand is backwards from normal
4863 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4864 operands (fmpyadd and fmpysub), handle bizarre register
4865 translation correctly for single precision format.
4867 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4868 or 'I' operands if the next format specifier is 'M' (fcmp
4869 condition completer).
4871 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4874 single number giving a bitmask for the MB and ME fields of an M
4875 form instruction. Change NB to accept 32, and turn it into 0;
4876 also turn 0 into 32 when disassembling. Seperated SH from NB.
4877 (insert_mbe, extract_mbe): New functions.
4878 (insert_nb, extract_nb): New functions.
4879 (SC_MASK): Mask out SA and LK bits.
4880 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4881 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4882 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4883 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4884 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4885 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4886 (powerpc_macros): Define table of macro definitions.
4887 (powerpc_num_macros): Define.
4889 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4890 if PPC_OPERAND_NEXT is set.
4892 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4894 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4895 char. Retrieve contents using bfd_getl32 instead of shifting.
4897 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * ppc-opc.c: New file. Opcode table for PowerPC, including
4900 opcodes for POWER (RS/6000).
4901 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4902 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4903 (CFILES): Add ppc-dis.c.
4904 (ppc-dis.o, ppc-opc.o): New targets.
4905 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4907 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4909 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4910 No space before 'u', 'f', or 'N'.
4912 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4914 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4915 farther than we should.
4917 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4919 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4921 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4923 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4925 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4926 needs it, to prevent reading past the end of a section.
4928 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4930 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4931 Removed t,A case for la; always use t,A(b) case.
4933 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4935 From Ted Lemen <mellon@pepper.ncd.com>
4936 * mips-dis.c (print_insn_arg): Handle 'k'.
4937 * mips-opc.c: Make cache use k, not t.
4939 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4941 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4942 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4943 FLOAT_FORMAT_CODE to put out floating point register names.
4945 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4947 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4949 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4951 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4953 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4955 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4956 larger than 32. Moved dsxx32 variants first for disassembler.
4958 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4960 * z8kgen.c, z8k-opc.h: Add full lda information.
4962 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4964 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4965 movb instructions. Any necessary space will be emitted by
4966 the code to handle nullification completers.
4968 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4970 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4972 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4974 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4975 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4977 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4979 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4981 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4983 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4984 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4986 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4988 * m88k-dis.c (m88kdis): comment change. Remove space after
4990 (printop): handle new arg types DEC and XREG for m88110.
4992 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4994 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4995 type for absolute branch addresses. Delete special
4996 "ble" and "be" code in 'W' operand code.
4998 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5000 * mips-opc.c: Set hazard information correctly for branch
5001 likely instructions.
5003 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5005 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5006 info->fprintf_func for printing and info->print_address_func for
5009 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5011 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5013 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5015 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5016 Corrected second case of "b" for disassembler.
5018 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5020 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5021 to BFD swapping routines to correspond to BFD name changes.
5023 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5025 * mips-opc.c: Change div machine instruction to be z,s,t rather
5026 than s,t. Change div macro to be d,v,t rather than d,s,t.
5027 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5028 rem and remu which generates only the corresponding div
5029 instruction. This is for compatibility with the MIPS assembler,
5030 which only generates the simple machine instruction when an
5031 explicit destination of $0 is used.
5032 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5034 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5036 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5037 WR_31 hazard for bal, bgezal, bltzal.
5039 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5041 * hppa-dis.c (print_insn_hppa): Use print function
5042 from within the disassemble_info, not fprintf_filtered.
5044 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5046 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5047 Law, law@cs.utah.edu.)
5049 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5051 * mips-opc.c ("absu"): Removed.
5054 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5057 Changed hazard information to distinguish between memory load
5058 delays and coprocessor load delays.
5060 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5062 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5064 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5066 * configure.in: Don't pass cpu to config.bfd.
5068 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * m88k-dis.c (m88kdis): Make class unsigned.
5072 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5074 * alpha-dis.c (print_insn_alpha): One branch format case was
5075 missing the instruction name.
5077 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5079 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5080 Add the arch-specific auxiliary files.
5081 (OFILES): Remove the arch-specific auxiliary files
5082 and use BFD_MACHINES instead of DIS_LIBS.
5083 * configure.in: Set BFD_MACHINES based on --with-targets option.
5085 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5087 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5090 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5092 * sparc-opc.c: Change CONST to const to deal with gcc
5093 -Dconst=__const -traditional.
5095 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5097 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5098 coprocessor instructions out of #if 0, and made them use new
5101 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5103 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5105 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5107 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5108 instruction, for use by the disassembler.
5110 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5111 hand-coded sign extensions that depended on 32-bit host ints.
5112 FIXME, we still depend on big-endian host bitfield ordering.
5113 (sparc_print_insn): Set the insn_info_valid field, and the
5114 other fields that describe the instruction being printed.
5116 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5118 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5119 `jmp' instead of just one of them.
5121 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5123 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5124 (fput_fp_reg_r): Renamed from fput_reg_r.
5125 (fput_fp_reg): New function.
5126 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5128 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5130 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5132 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5134 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5136 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5137 don't output a space.
5139 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5141 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5143 * mips-opc.c: New file, containing opcode table from
5144 ../include/opcode/mips.h.
5145 * Makefile.in: Add it.
5147 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5149 * m88k-dis.c: New file, moved in from gdb and changed to use the
5150 new dis-asm.h disassembler interface.
5151 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5152 (m88k-dis.o): New target.
5154 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5156 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5157 argument string const char * to correspond to opcode/mips.h.
5159 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5161 * mips-dis.c: Updated to account for name changes in new version
5163 * Makefile.in: Added header file dependencies.
5165 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5167 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5169 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5171 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5172 extend, rather than shifts.
5174 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5176 * Makefile.in: Undo 15 June change.
5178 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5180 * m68k-dis.c (print_insn_arg): Change return value to byte count
5182 * m68k-dis.c: Re-write to detect invalid operands before
5183 printing anything, so we can handle this the same way we
5184 handle invalid opcodes.
5186 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5188 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5190 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5192 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5195 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5197 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5199 * configure.in: Do make sysdep.h link.
5200 * Makefile.in: Search ../include. Don't search ../bfd.
5202 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5204 Changes from Jeff Law, law@cs.utah.edu:
5205 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5206 Do not print a space before the completers specified by
5209 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5211 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5212 defined, since gdb has been fixed.
5214 Changes from Jeff Law, law@cs.utah.edu:
5215 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5216 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5217 be a *disassemble_info, not a *FILE.
5218 * hppa-dis.c: Support 'd', '!', and 'a'.
5219 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5220 * hppa-dis.c: Delete cases which are no longer needed.
5222 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5224 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5226 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5228 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5231 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5233 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5234 * configure.in: No longer need to configure to get sysdep.h.
5236 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5238 * Patches from Jeffrey Law <law@cs.utah.edu>.
5239 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5240 templates for 1.1 FP computational instructions.
5242 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5244 * h8500-dis.c (print_insn_h8500): Address argument is type
5246 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5249 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5250 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5252 * sparc-dis.c (compare_opcodes): Move static declaration to
5255 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5257 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5258 instruction, remove unimp hack from 'l' argument.
5260 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5262 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5265 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5267 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5268 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5271 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5273 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5274 arrays of string pointers to 2-d arrays of chars, to save
5277 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5279 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5280 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5282 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5284 * hppa-dis.c: New file from Utah, adapted to new disassembler
5286 * Makefile.in: Include it.
5288 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5290 * sh-dis.c, sh-opc.h: New files.
5292 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5294 * alpha-dis.c, alpha-opc.h: New files.
5296 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5298 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5301 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5303 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5305 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5307 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5310 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5312 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5313 and double percent signs a few places.
5315 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5317 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5318 Use info->print_address_func not print_address.
5320 * dis-buf.c (generic_print_address): New function.
5322 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5324 * Makefile.in: Add sparc-dis.c.
5325 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5327 Add `add' instruction to the set that get checked
5328 for a preceding `sethi' in order to print an absolute address.
5329 * (print_insn): Disassembly prefers real instructions.
5330 (is_delayed_branch): Speed up.
5331 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5332 Still missing some float ops, and needs testing.
5333 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5334 F_ALIAS. Use printf, not fprintf, when not passing a file
5336 (compare_opcodes): Check that identical instructions have
5337 identical opcodes, complain otherwise.
5340 * Include reg_names.
5342 Use dis-asm.h/read_memory_func interface.
5344 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5346 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5347 deliberately return non-zero to setjmp from longjmp. Otherwise
5348 this code fails to compile.
5350 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5352 * m68k-dis.c: Fix prototype for fetch_arg().
5354 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5356 * dis-buf.c: New file, for new read_memory_func interface.
5357 Makefile.in (OFILES): Include it.
5358 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5359 Use new read_memory_func interface.
5361 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5363 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5364 * h8500-opc.h: Fix couple of opcodes.
5366 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5368 * Makefile.in: add dvi & installcheck targets
5370 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5372 * Makefile.in: Update for h8500-dis.c.
5374 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5376 * h8500-dis.c, h8500-opc.h: New files
5378 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5380 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5381 ../include/dis-asm.h.
5382 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5383 and ../gdb/m68k-pinsn.c).
5384 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5385 and ../gdb/i386-pinsn.c).
5386 * m68881-ext.c: New file. Moved definition of
5387 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5388 * Makefile.in: Adjust for new files.
5389 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5390 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5391 can be dis-assembled.
5393 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5395 * mips-dis.c (print_insn_arg): Now returns void.
5397 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5399 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5400 files that use the macros.
5402 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5404 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5405 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5406 (CFILES): Added mips-dis.c.
5408 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5410 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5411 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5413 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5415 * Makefile.in: Improve *clean rules.
5416 * configure.in: Allow a default host.
5418 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5420 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5421 files include other sysdep files
5423 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5425 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5427 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5429 * configure.in: For host support, use ../bfd/configure.host
5430 so it stays in sync with the ../bfd/hosts database.
5432 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5434 * configure.in: use cpu-vendor-os triple instead of nested cases
5436 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5438 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5439 *always* the wrong one.
5441 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5443 * z8kgen.c: added copyright info
5445 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5447 * z8k-dis.c (unparse_instr): prettier tabs
5448 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5450 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5452 * configure.in: Add ncr* configuration.
5453 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5454 picayune ANSI compilers happy.
5456 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5458 * configure.in (i386): Make i386 and i486 synonymous for now.
5459 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5461 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5463 * Makefile.in (install): Fix typo.
5465 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5467 * Makefile.in (make): Remove obsolete crud.
5468 (sparc-opc.o): Avoid Sun Make VPATH bug.
5470 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5472 * Makefile.in: since there are no SUBDIRS, remove rule and
5473 references of subdir_do.
5475 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5477 * Makefile.in (install): Get the library name right here too.
5478 Don't install bfd.h, since it's unrelated to this library. No
5479 subdirs to recurse into, either.
5480 (CFILES): The source file has a .c suffix, not .o.
5482 * sparc-opc.c: New file, moved from BFD.
5483 * Makefile.in (OFILES): Build it.
5485 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5487 * z8k-dis.c: fixed forward refferences of some declarations.
5489 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5491 * Makefile.in: get the name of the library right
5493 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5495 * z8k-dis.c: knows how to disassemble z8k stuff
5496 * z8k-opc.h: new file full of z8000 opcodes
5500 version-control: never