1 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10200-opc.c (mn10200_operands): Fix insertion position
6 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
8 * mn10200-opc.c: Create mn10200 opcode table.
9 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
10 but moving along nicely.
12 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
14 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
16 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
18 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
19 specifiers for fmovem* instructions.
21 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
23 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
25 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
27 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
30 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
32 * mn10300-opc.c: Add some comments explaining the various
35 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
37 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
39 * m68k-dis.c (print_insn_arg): Handle new < and > operand
42 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
43 operand specifiers in fmovm* instructions.
45 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
47 * ppc-opc.c (insert_li): Give an error if the offset has the two
48 least significant bits set.
50 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
52 * mips-dis.c (print_insn_mips16): Separate the instruction from
53 the arguments with a tab, not a space.
55 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
57 * mn10300-dis.c (disasemble): Finish conversion to '$' as
60 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
63 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
65 * configure: Rebuild with autoconf 2.12.
67 Add support for mips16 (16 bit MIPS implementation):
68 * mips16-opc.c: New file.
69 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
70 (mips16_reg_names): New static array.
71 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
72 after seeing a 16 bit symbol.
73 (print_insn_little_mips): Likewise.
74 (print_insn_mips16): New static function.
75 (print_mips16_insn_arg): New static function.
76 * mips-opc.c: Add jalx instruction.
77 * Makefile.in (mips16-opc.o): New target.
78 * configure.in: Use mips16-opc.o for bfd_mips_arch.
81 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
83 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
84 operand specifiers in *save, *restore and movem* instructions.
86 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
89 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
90 register operands for immediate arithmetic, not, neg, negx, and
91 set according to condition instructions.
93 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
94 specifier of the effective-address operand in immediate forms of
95 arithmetic instructions. The specifier for the immediate operand
96 notes how and where the constant will be stored.
98 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
100 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
103 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
106 * mn10300-dis.c (disassemble): Prefix registers with '%'.
108 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
110 * mn10300-dis.c (disassemble): Handle register lists.
112 * mn10300-opc.c: Fix handling of register list operand for
113 "call", "ret", and "rets" instructions.
115 * mn10300-dis.c (disassemble): Print PC-relative and memory
116 addresses symbolically if possible.
117 * mn10300-opc.c: Distinguish between absolute memory addresses,
118 pc-relative offsets & random immediates.
120 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
122 (disassemble): Handle SPLIT and EXTENDED operands.
124 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
126 * mn10300-dis.c: Rough cut at printing some operands.
128 * mn10300-dis.c: Start working on disassembler support.
129 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
131 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
133 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
136 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
138 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
141 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
143 * mn10300-opc.c (mn10300_opcodes): Demand parens around
144 register argument is calls and jmp instructions.
146 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
148 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
149 getx operand. Fix opcode for mulqu imm,dn.
151 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
153 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
154 in MN10300_OPERAND_SPLIT operands for how many bits
155 appear in the basic insn word. Add IMM32_HIGH24,
156 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
157 (mn10300_opcodes): Use new operands as needed.
159 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
160 for bset, bclr, btst instructions.
161 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
163 * mn10300-opc.c (mn10300_operands): Remove many redundant
164 operands. Update opcode table as appropriate.
165 (IMM32): Add MN10300_OPERAND_SPLIT flag.
166 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
168 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
170 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
171 operands (for indexed load/stores). Fix bitpos for DI
172 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
173 few instructions that insert immediates/displacements in the
174 middle of the instruction. Add IMM8E for 8 bit immediate in
175 the extended part of an instruction.
176 (mn10300_operands): Use new opcodes as appropriate.
179 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
181 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
182 sequential so the assembler never parallelizes it with
186 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
188 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
189 a data/address register that appears in register field 0
190 and register field 1.
191 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
193 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
195 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
196 standard disassembly.
198 * alpha-opc.c (alpha_operands): Rearrange flags slot.
199 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
200 Recategorize PALcode instructions.
203 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
205 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
208 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
210 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
211 there are no operand types.
214 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
216 * v850-opc.c (D9_RELAX): Renamed from D9, all references
218 (v850_operands): Make sure D22 immediately follows D9_RELAX.
221 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
223 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
226 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
228 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
229 and sst.w instructions.
231 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
235 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
237 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
240 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
242 * ppc-opc.c (PPCPWR2): Define.
243 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
246 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
248 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
249 field for movhu instruction.
252 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
253 cast value to "long" not "signed long" to keep hpux10
257 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
259 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
262 * mn10300-opc.c (FMT*): Remove definitions.
264 * mn10300-opc.c (mn10300_opcodes): Fix destination register
265 for shift-by-register opcodes.
267 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
268 into [AD][MN][01] for encoding the position of the register
271 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
273 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
274 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
276 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
278 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
279 Fix various typos. Add "PAREN" operand.
281 (mn10300_opcodes): Surround all memory addresses with "PAREN"
282 operands. Fix several typos.
284 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
287 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
289 * mn10300-opc.c (FMT_XX): Renumber starting at one.
290 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
292 (mn10300_opcodes): Break opcode format out into its own field.
293 Update many operand fields to deal with signed vs unsigned
294 issues. Fix one or two typos in the "mov" instruction
295 opcode, mask and/or operand fields.
297 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
299 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
302 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
304 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
305 all opcodes. Very rough cut at operands for all opcodes.
307 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
310 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
312 * mn10200-opc.c, mn10300-opc.c: New files.
313 * mn10200-dis.c, mn10300-dis.c: New files.
314 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
315 * disassemble.c: Break mn10x00 support into 10200 and 10300
317 * configure.in: Likewise.
318 * configure: Rebuilt.
320 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
322 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
324 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
326 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
328 * disassemble (ARCH_mn10x00): Define.
329 (disassembler): Handle bfd_arch_mn10x00.
330 * configure.in: Recognize bfd_mn10x00_arch.
331 * configure: Rebuilt.
333 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
335 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
336 accordingly. Don't declare functions using op_rtn.
339 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
341 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
342 params to be more standard.
343 * (disassemble): Print absolute addresses and symbolic names for
344 branch and jump targets.
345 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
347 * (v850_opcodes): Add breakpoint insn.
350 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
352 * m68k-opc.c: Move the fmovemx data register cases before the
353 other cases, so that they get recognized before the data register
354 does gets treated as a degenerate register list.
356 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
358 * mips-opc.c: Add a case for "div" and "divu" with two registers
359 and a destination of $0.
361 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
363 * mips-dis.c (print_insn_arg): Add prototype.
364 (_print_insn_mips): Ditto.
366 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
368 * mips-dis.c (print_insn_arg): Print condition code registers as
371 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
373 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
376 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
378 * v850-dis.c (disassemble): Make static. Provide prototype.
380 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
382 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
385 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
387 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
388 ']' characters into the output stream.
389 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
390 Add "memop" field to all opcodes (for the disassembler).
391 Reorder opcodes so that "nop" comes before "mov" and "jr"
394 * v850-dis.c (print_insn_v850): Fix typo in last change.
396 * v850-dis.c (print_insn_v850): Properly handle disassembling
397 a two byte insn at the end of a memory region when the memory
398 region's size is only two byte aligned.
400 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
402 * v850-dis.c (v850_reg_names): Define.
403 (v850_sreg_names, v850_cc_names): Likewise.
404 (disassemble): Very rough cut at printing operands (unformatted).
406 * v850-opc.c (BOP_MASK): Fix.
407 (v850_opcodes): Fix mask for jarl and jr.
409 * v850-dis.c: New file. Skeleton for disassembler support.
410 * Makefile.in Remove v850 references, they're not needed here
411 and they weren't being sanitized away.
412 * configure.in: Add v850-dis.o when building v850 toolchains.
413 * configure: Rebuilt.
414 * disassemble.c (disassembler): Call v850 disassembler.
416 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
417 (insert_d8_6, extract_d8_6): New functions.
418 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
419 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
421 (IF4A, IF4B): Use "D7" instead of "D7S".
422 (IF4C, IF4D): Use "D8_7" instead of "D8".
423 (IF4E, IF4F): New. Use "D8_6".
424 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
425 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
427 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
428 (v850_operands): Change D16 to D16_15, use special insert/extract
429 routines. New new D16 that uses the generic insert/extract code.
430 (IF7A, IF7B): Use D16_15.
431 (IF7C, IF7D): New. Use D16.
432 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
434 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
435 message. Issue an error if the branch offset is odd.
437 * v850-opc.c: Add notes about needing special insert/extract
438 for all the load/store insns, except "ld.b" and "st.b".
440 * v850-opc.c (insert_d22, extract_d22): New functions.
441 (v850_operands): Use insert_d22 and extract_d22 for
443 (insert_d9): Fix range check.
445 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
447 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
448 and set bits field to D9 and D22 operands.
450 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
452 * v850-opc.c (v850_operands): Define SR2 operand.
453 (v850_opcodes): "ldsr" uses R1,SR2.
455 * v850-opc.c (v850_opcodes): Fix opcode specs for
456 sld.w, sst.b, sst.h, sst.w, and nop.
458 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
460 * v850-opc.c (v850_opcodes): Add null opcode to mark the
461 end of the opcode table.
465 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
467 * d10v-opc.c (pre_defined_registers): Added register pairs,
468 "r0-r1", "r2-r3", etc.
472 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
474 * v850-opc.c (v850_operands): Make I16 be a signed operand.
475 Create I16U for an unsigned 16bit mmediate operand.
476 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
478 * v850-opc.c (v850_operands): Define EP operand.
479 (IF4A, IF4B, IF4C, IF4D): Use EP.
481 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
482 with immediate operand, "movhi". Tweak "ldsr".
484 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
485 correct. Get sld.[bhw] and sst.[bhw] closer.
487 * v850-opc.c (v850_operands): "not" is a two byte insn
489 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
491 * v850-opc.c (v850_operands): D16 inserts at offset 16!
493 * v850-opc.c (two): Get order of words correct.
495 * v850-opc.c (v850_operands): I16 inserts at offset 16!
497 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
498 register source and destination operands.
499 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
501 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
502 same thinko in "trap" opcode.
504 * v850-opc.c (v850_opcodes): Add initializer for size field
507 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
508 Add D8 for 8-bit unsigned field in short load/store insns.
509 (IF4A, IF4D): These both need two registers.
510 (IF4C, IF4D): Define. Use 8-bit unsigned field.
511 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
512 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
513 for "ldsr" and "stsr".
514 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
517 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
518 short store word (sst.w).
520 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
522 * v850-opc.c (v850_operands): Added insert and extract fields,
523 pointers to functions that handle unusual operand encodings.
525 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
527 * v850-opc.c (v850_opcodes): Enable "trap".
529 * v850-opc.c (v850_opcodes): Fix order of displacement
530 and register for "set1", "clr1", "not1", and "tst1".
532 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
534 * v850-opc.c (v850_operands): Add "B3" support.
535 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
538 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
540 * v850-opc.c: Close unterminated comment.
542 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
544 * v850-opc.c (v850_operands): Add flags field.
545 (v850_opcodes): add move opcodes.
547 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
549 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
550 * configure: (bfd_v850v_arch) Add new case.
551 * configure.in: (bfd_v850_arch) Add new case.
552 * v850-opc.c: New file.
555 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
557 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
560 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
562 * d10v-opc.c: Add additional information to the opcode
563 table to help determinine which instructions can be done
567 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
569 * mpw-make.sed: Update editing of include pathnames to be
572 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
574 * arm-opc.h: Added "bx" instruction definition.
576 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
578 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
581 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
583 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
585 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
587 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
590 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
592 * makefile.vms: Update for alpha-opc changes.
594 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
596 * i386-dis.c (print_insn_i386): Actually return the correct value.
597 (ONE, OP_ONE): #ifdef out; not used.
600 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
602 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
603 Changed subi operand type to treat 0 as 16.
606 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
608 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
611 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
613 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
614 memory transfer instructions. Add new format string entries %h and %s.
615 * arm-dis.c: (print_insn_arm): Provide decoding of the new
619 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
621 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
622 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
625 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
627 * alpha-dis.c (print_insn_alpha_osf): Remove.
628 (print_insn_alpha_vms): Remove.
629 (print_insn_alpha): Make globally visible. Chose the register
630 names based on info->flavour.
631 * disassemble.c: Always return print_insn_alpha for the alpha.
634 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
636 * d10v-dis.c (dis_long): Handle unknown opcodes.
638 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
640 * d10v-opc.c: Changes to support signed and unsigned numbers.
641 All instructions with the same name that have long and short forms
642 now end in ".l" or ".s". Divs added.
643 * d10v-dis.c: Changes to support signed and unsigned numbers.
645 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
647 * d10v-dis.c: Change all functions to use info->print_address_func.
650 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
652 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
653 move ccr/sr insns more strict so that the disassembler only
654 selects them when the addressing mode is data register.
657 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
658 * d10v-opc.c (pre_defined_registers): Declare.
659 * d10v-dis.c (print_operand): Now uses pre_defined_registers
660 to pick a better name for the registers.
663 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
665 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
666 operands for fexpand and fpmerge. From Christian Kuehnke
667 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
669 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
671 * alpha-dis.c (print_insn_alpha): No longer the user-visible
672 print routine. Take new regnames and cpumask arguments.
673 Kill the environment variable nonsense.
674 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
675 (print_insn_alpha_vms): New function. Do VMS style regnames.
676 * disassemble.c (disassembler): Test bfd flavour to pick
677 between OSF and VMS routines. Default to OSF.
679 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
681 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
682 * configure: Rebuild.
683 * Makefile.in (install): Use @INSTALL_SHLIB@.
686 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
688 * configure: (bfd_d10v_arch) Add new case.
689 * configure.in: (bfd_d10v_arch) Add new case.
690 * d10v-dis.c: New file.
691 * d10v-opc.c: New file.
692 * disassemble.c (disassembler) Add entry for d10v.
695 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
697 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
698 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
700 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
702 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
703 distinguish between variants of the instruction set.
704 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
705 distinguish between variants of the instruction set.
707 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
709 * i386-dis.c (print_insn_i8086): New routine to disassemble using
710 the 8086 instruction set.
711 * i386-dis.c: General cleanups. Make most things static. Add
712 prototypes. Get rid of static variables aflags and dflags. Pass
713 them as args (to almost everything).
715 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
717 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
719 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
721 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
722 if the next arg is marked with SRC_IN_DST. Gross.
724 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
725 we're looking for and find EXR.
727 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
728 if we're looking for KBIT and we don't find it.
730 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
733 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
734 3bit immediate operands.
736 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
738 * Released binutils 2.7.
740 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
741 <kkaempf@progis.ac-net.de>.
743 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
745 * alpha-opc.c: Correct second case of "mov" to use OPRL.
747 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
749 * sparc-dis.c (print_insn_sparclite): New routine to print
750 sparclite instructions.
752 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
754 * m68k-opc.c (m68k_opcodes): Add coldfire support.
756 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
758 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
759 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
760 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
762 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
764 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
765 Use autoconf-set values.
766 (docdir, oldincludedir): Removed.
767 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
769 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
771 * alpha-opc.c: New file.
772 * alpha-opc.h: Remove.
773 * alpha-dis.c: Complete rewrite to use new opcode table.
774 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
775 * configure: Rebuild with autoconf 2.10.
776 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
777 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
779 (alpha-opc.o): New target.
781 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
783 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
784 Set imm_added_to_rs1 even if the source and destination register
787 * sparc-opc.c: Add some two operand forms of the wr instruction.
789 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
791 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
794 * disassemble.c (disassembler): Handle H8/S.
795 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
797 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
799 * sparc-opc.c: Add beq/teq as aliases for be/te.
801 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
802 <sergei@msil.sps.mot.com>.
804 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
806 * makefile.vms: New file.
808 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
810 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
812 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
815 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
817 * i386-dis.c (OP_OFF): Call append_prefix.
819 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
821 * ppc-opc.c (instruction encoding macros): Add explicit casts to
822 unsigned long to silence a warning from the Solaris PowerPC
825 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
827 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
829 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
831 * sparc-dis.c (X_IMM,X_SIMM): New macros.
833 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
834 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
835 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
836 cpush, cpusha, cpull sparclet insns.
838 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
840 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
842 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
844 * sparc-opc.c: Set F_FBR on floating point branch instructions.
845 Set F_FLOAT on other floating point instructions.
847 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
849 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
851 (powerpc_opcodes): Add 860/821 specific SPRs.
853 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
855 * configure.in: Permit --enable-shared to specify a list of
856 directories. Set and substitute BFD_PICLIST.
857 * configure: Rebuild.
858 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
859 uses. Set to @BFD_PICLIST@.
861 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
863 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
864 not "abs", which may be needed for the absolute in something
865 like btst #0,@10:8. Print L_3 immediates separately from other
866 immediates. Change ABSMOV reference to ABS8MEM.
868 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
870 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
871 (current_arch_mask): New static global.
872 (compute_arch_mask): New static function.
873 (print_insn_sparc): Delete sparc_v9_p. New static local
874 current_mach. Resort opcode table if current_mach changes.
875 Generalize "insn not supported" test.
876 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
877 Delete test for v9/!v9.
878 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
880 (brfc): Split into CBR and FBR for coprocessor/fp branches.
881 (brfcx): Renamed to FBRX.
882 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
883 coprocessor mnemonics are not supported on the sparclet).
884 (condf): Renamed to CONDF.
885 (SLCBCC2): Delete F_ALIAS flag.
887 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
889 * sparc-opc.c (sparc_opcodes): rd must be 0 for
890 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
892 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
894 * Makefile.in (config.status): Depend upon BFD VERSION file, so
895 that the shared library version number is set correctly.
897 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
899 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
900 Miles Bader <miles@gnu.ai.mit.edu>.
901 * configure: Rebuild.
903 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
905 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
908 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
910 * configure: Rebuild with autoconf 2.8.
912 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
914 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
915 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
917 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
919 * configure.in: Don't set SHLIB or SHLINK to an empty string,
920 since they appear as targets in Makefile.in.
921 * configure: Rebuild.
923 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
925 * mpw-make.sed: Edit out shared library support bits.
927 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
929 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
930 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
931 (sparc_opcodes): Add sparclet insns.
932 (sparclet_cpreg_table): New static local.
933 (sparc_{encode,decode}_sparclet_cpreg): New functions.
934 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
936 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
938 * i386-dis.c (index16): New static variable.
939 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
941 (OP_indirE): Return result of OP_E.
942 (OP_E): Check for 16 bit addressing mode, and disassemble
943 correctly. Optimised 32 bit case a little. Don't print
944 "(base,index,scale)" when sib specifies only an offset.
946 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
948 * configure.in: Set and substitute SHLIB_DEP.
949 * configure: Rebuild.
950 * Makefile.in (SHLIB_DEP): New variable.
951 (LIBIBERTY_LISTS, BFD_LIST): New variables.
952 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
953 COMMON_SHLIB, add them to piclist with appropriate modifications.
954 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
955 here: just use piclist.
957 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
959 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
960 (print_insn_sparc): Rewrite v9/not-v9 tests.
961 (compare_opcodes): Likewise.
962 * sparc-opc.c (MASK_<ARCH>): Define.
963 (v6,v7,v8,sparclite,v9,v9a): Redefine.
964 (sparclet,v6notv9): Define.
965 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
966 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
968 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
970 * configure.in: Call AC_PROG_CC before configure.host.
971 * configure: Rebuild.
973 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
975 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
977 * i386-dis.c (onebyte_has_modrm): New static array.
978 (twobyte_has_modrm): New static array.
979 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
981 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
983 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
986 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
988 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
991 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
993 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
994 m68010up, not just m68020up | cpu32.
996 * Makefile.in (SONAME): New variable.
997 ($(SHLINK)): Make a link to the transformed name, as well.
998 (stamp-tshlink): New target.
999 (install): Skip stamp-tshlink during install.
1001 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1003 * configure.in: Call AC_ARG_PROGRAM.
1004 * configure: Rebuild.
1005 * Makefile.in (program_transform_name): New variable.
1006 (install): Transform library name before installing it.
1008 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1010 * i960-dis.c (mem): Add HX dcinva instruction.
1012 Support for building as a shared library, based on patches from
1013 Alan Modra <alan@spri.levels.unisa.edu.au>:
1014 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1015 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1016 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1017 * configure: Rebuild.
1018 * Makefile.in (ALLLIBS): New variable.
1019 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1020 (COMMON_SHLIB, SHLINK): New variables.
1021 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1022 (STAGESTUFF): Remove variable.
1023 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1024 (stamp-piclist, piclist): New targets.
1025 ($(SHLIB), $(SHLINK)): New targets.
1026 ($(OFILES)): Depend upon stamp-picdir.
1027 (disassemble.o): Build twice if PICFLAG is set.
1028 (MOSTLYCLEAN): Add pic/*.o.
1029 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1030 (distclean): Remove pic and stamp-picdir.
1031 (install): Install shared libraries.
1032 (stamp-picdir): New target.
1034 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1036 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1037 Print unknown instruction as "unknown", rather than in hex.
1039 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1041 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1043 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1045 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1047 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1049 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1050 when necessary. From Ulrich Drepper
1051 <drepper@myware.rz.uni-karlsruhe.de>.
1053 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1055 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1056 sparc_num_opcodes. Update architecture enum values.
1057 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1058 (sparc_opcode_lookup_arch): New function.
1059 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1060 (sparc_opcodes): Add v9a shutdown insn.
1062 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1064 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1065 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1067 (print_insn_sparc64): Deleted.
1068 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1071 * sparc-opc.c (architecture_pname): Add v9a.
1073 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1075 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1076 incorrectly defined as 0x16 when it should be 0x15.
1077 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1078 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1079 excb (exception barrier) which is defined in the Alpha
1080 Architecture Handbook version 2.
1081 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1082 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1083 disassembled as or, for example.
1085 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1087 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1088 (_print_insn_mips): Change i from int to unsigned int.
1090 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1092 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1093 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1095 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1097 * i386-dis.c: Added Pentium Pro instructions.
1099 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1101 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1104 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1106 * sh-opc.h (sh_nibble_type): Added REG_B.
1107 (sh_arg_type): Added A_REG_B.
1108 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1110 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1112 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1114 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1116 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1118 * Makefile.in (distclean): Remove stamp-h. From Ronald
1119 F. Guilmette <rfg@monkeys.com>.
1121 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1123 From David Mosberger-Tang <davidm@azstarnet.com>:
1124 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1127 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1129 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1130 (sh_table): Added many SH3 opcodes.
1131 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1133 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1135 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1136 (subco,subco.): Mark this PPC, not PPCCOM.
1138 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1140 * configure: Rebuild with autoconf 2.7.
1142 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1144 * configure: Rebuild with autoconf 2.6.
1146 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1148 * configure.in: Sort list of architectures. Accept but do nothing
1149 for alliant, convex, pyramid, romp, and tahoe.
1151 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1153 * a29k-dis.c (print_special): Change num to unsigned int.
1155 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1157 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1160 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1162 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1163 * configure: Rebuilt.
1165 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1167 * configure.in: Add case for bfd_i860_arch.
1168 * configure: Rebuild.
1170 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1172 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1173 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1174 (NEXTDOUBLE): Likewise.
1175 (print_insn_m68k): Don't match fmoveml if there is more than one
1176 register in the list.
1177 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1179 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1181 * m68k-opc.c: Use #W rather than #w.
1182 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1184 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1186 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1187 and likewise for all the dbxx opcodes.
1189 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1191 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1193 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1195 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1196 the VR4100 specific instructions to the mips_opcodes structure.
1198 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1200 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1201 ugly Metrowerks bug in CW6, is fixed in CW7.
1203 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1205 * ppc-opc.c (whole file): Add flags for common/any support.
1207 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1209 * Makefile.in (BISON): Remove macro.
1210 (FLAGS_TO_PASS): Remove BISON.
1212 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1214 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1216 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1217 instructions that take no args by looking at the match mask.
1218 (print_insn_arg): Always print "%" before register names.
1219 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1220 [case '_']: Don't print "@#" before address.
1221 [case 'J']: Use "%s" as format string, not register name.
1222 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1224 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1226 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1229 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1231 From David Mosberger-Tang <davidm@azstarnet.com>
1233 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1234 (alpha_insn_set): added definitions for VAX floating point
1235 instructions (Unix compilers don't generate these, but handcoded
1236 assembly might still use them).
1238 * alpha-dis.c (print_insn_alpha): added support for disassembling
1239 the miscellaneous instructions in the Alpha instruction set.
1241 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1243 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1244 no longer create sysdep.h, sed ppc-opc.c to work around a
1245 serious Metrowerks C bug.
1246 * mpw-make.in: Remove.
1247 * mpw-make.sed: New file, used by mpw-configure to edit
1248 Makefile.in into an MPW makefile.
1250 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1252 * Makefile.in (maintainer-clean): New synonym for realclean.
1254 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1256 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1257 which use '0', '1', and '2' instead. Specify the proper size for
1258 a pmove immediate operand. Correct the pmovefd patterns to be
1259 moves to a register, not from a register.
1260 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1262 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1264 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1265 %psr, %wim, %tbr as F_NOTV9.
1267 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1269 * Makefile.in (Makefile): Just rebuild Makefile when running
1271 (config.h, stamp-h): New targets.
1272 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1273 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1274 rebuilding config.h.
1275 * configure: Rebuild.
1277 * mips-opc.c: Change unaligned loads and stores with "t,A"
1278 operands to use "t,A(b)".
1280 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1282 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1284 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1286 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1287 until 3 instead of until 2.
1289 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1291 * Makefile.in (ALL_CFLAGS): Define.
1292 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1293 (MOSTLYCLEAN): Add config.log.
1294 (distclean): Don't remove config.log.
1295 * configure.in: Substitute HDEFINES.
1296 * configure: Rebuild.
1298 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1300 * sh-opc.h (sh_arg_type): Add F_FR0.
1301 (sh_table, case fmac): Add F_FR0 as first argument.
1303 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1305 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1307 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1309 * sparc-dis.c: Remove all references to NO_V9.
1311 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1313 * aclocal.m4: Just include ../bfd/aclocal.m4.
1314 * configure: Rebuild.
1316 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1318 * sparc-dis.c (X_DISP19): Define.
1319 (print_insn, case 'G'): Use it.
1320 (print_insn, case 'L'): Sign extend displacement.
1322 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1324 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1325 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1326 host_makefile_frag or frags.
1327 * aclocal.m4: New file.
1328 * configure: Rebuild.
1329 * Makefile.in (INSTALL): Set to @INSTALL@.
1330 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1331 (INSTALL_DATA): Set to @INSTALL_DATA@.
1333 (AR_FLAGS): Set to rc rather than qc.
1334 (CC): Define as @CC@.
1335 (CFLAGS): Set to @CFLAGS@.
1336 (@host_makefile_frag@): Remove.
1337 (config.status): Remove dependency upon @frags@.
1339 * configure.in: ../bfd/config.bfd now just sets shell variables.
1340 Use them rather than looking through target Makefile fragments.
1341 * configure: Rebuild.
1343 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1345 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1347 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1349 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1350 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1353 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1354 (lookup_{name,value}): New functions.
1355 (prefetch_table): New static local.
1356 (sparc_{encode,decode}_prefetch): New functions.
1357 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1359 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1361 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1364 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1366 * sh-dis.c: Correct comment on first line of file.
1368 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1370 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1372 * sparc-opc.c (asi, membar): New static locals.
1373 (sparc_{encode,decode}_{asi,membar}): New functions.
1374 (sparc_opcodes, membar insn): Fix.
1375 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1376 Support decoding of membar masks.
1379 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1381 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1383 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1385 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1386 and likewise for the other branches. Add bhs as an alias for bcc,
1387 and likewise for the size variants. Add dbhs as an alias for
1390 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1392 * sh-opc.h (FP sts instructions): Update to match reality.
1394 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1396 * m68k-dis.c: (fpcr_names): Add % before all register names.
1397 (reg_names): Likewise.
1398 (print_insn_arg): Don't explicitly print % before register names.
1399 Add % before register names in static array names. In case 'r',
1400 print data registers as `@(Dn)', not `Dn@'. When printing a
1401 memory address, don't print @# before it.
1402 (print_indexed): Change base_disp and outer_disp from int to
1403 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1404 syntax. Sign extend 8 byte displacement correctly.
1405 (print_base): Print using MIT syntax. Print zpc when appropriate.
1406 Change parameter disp from int to bfd_vma.
1408 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1411 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1413 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1414 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1415 * sh-opc.h (sh_arg_type): Add new operand types.
1416 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1418 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1420 * Makefile.in (distclean): Remove generated file config.h.
1422 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1424 * Makefile.in (distclean): Remove generated file config.h.
1426 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1428 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1430 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1432 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1433 rather than numopcodes. Use m68k_opcodes rather than removed
1434 opcode function. Don't check F_ALIAS.
1435 (print_insn_arg): Change first parameter to be const char *.
1436 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1437 (m68k-opc.o): New target.
1438 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1439 * configure: Rebuild.
1441 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1443 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1444 (opcode_bits, opcode_hash_table): New variables.
1445 (opcodes_initialized): Renamed from opcodes_sorted.
1446 (build_hash_table): New function.
1447 (is_delayed_branch): Use hash table.
1448 (print_insn): Renamed from print_insn_sparc, made static.
1449 Build and use hash table. If !sparc64, ignore sparc64 insns,
1450 and vice-versa if sparc64.
1451 (print_insn_sparc, print_insn_sparc64): New functions.
1452 (compare_opcodes): Move sparc64 opcodes to end.
1453 Print commutative insns with constant second.
1454 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1456 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1458 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1459 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1460 avoids printing a delay slot in a delay slot.
1461 * sh-opc.h (sh_table): Fully bracket last entry.
1463 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1465 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1467 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1469 * configure.in: Get host_makefile_frag from ${srcdir}.
1471 * configure.in: Autoconfiscated. Check for string[s].h. Create
1472 config.h from config.in. Don't set up sysdep.h link.
1473 * sysdep.h: New file.
1474 * configure, config.in: New files, generated from configure.in.
1475 * Makefile.in: Updated to be processed autoconf-style.
1476 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1477 (Makefile): Depend on config.status.
1478 (config.status): New rule.
1479 * configure.bat: Update Makefile substitutions.
1481 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1483 * mips-opc.c (L1): Define.
1484 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1485 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1488 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1490 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1491 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1492 have multiple add units but only a single logical unit.
1494 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1495 shifted by 18, without any insertion or extraction function.
1496 (insert_cr, extract_cr): Remove.
1499 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1501 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1504 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1506 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1509 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1511 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1512 * sh-opc.h: Add copyright.
1514 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1516 * Makefile.in (crunch-m68k): Delete extra target accidentally
1517 checked in a while ago.
1519 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1521 * sh-opc.h (sh_table): Add SH3 support.
1523 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1525 * sh-opc.h: Added bsrf and braf.
1527 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1529 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1530 bogus [ls]fm{ea,fd} patterns.
1532 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1533 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1534 initialize it from memory. Make function static.
1535 (print_insn_{big,little}_arm): New functions.
1536 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1537 the correct endianness.
1540 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1542 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1543 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1546 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1548 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1551 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1553 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1554 17th, so that it builds again using GCC as the compiler.
1556 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1558 * mips-dis.c (print_insn_little_mips): Cast return value from
1559 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1560 expects an unsigned long, and that might be fewer words of
1561 argument storage (e.g., if bfd_vma is long long on a 32-bit
1563 (print_insn_big_mips): Likewise with bfd_getb32 value.
1564 (_print_insn_mips): Now static.
1566 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1568 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1569 gcc memory hog problem with initializer is fixed.
1572 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1574 * arc-opc.c (NULL): Define.
1575 (arc_operands, insn fields u,s): Delete.
1576 (arc_operands, insn fields a,b,c): Mark as signed.
1577 (arc_opcodes): No longer const, links computed at run-time.
1578 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1579 suffixes that affect the insn code.
1580 (arc_opcodes): Resort table to macros are first.
1581 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1582 (arc_opcodes, st [b] entry): Likewise.
1583 (arc_opcodes, st [b,d] entry): Fix mask, value.
1584 (arc_reg_names): Add entries for r29, r30, r31, r60.
1585 (opcode_map, icode_map): New static globals.
1586 (arc_opcode_init_tables): Initialize them.
1587 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1588 (insert_shimmoffset): Signal error if register present.
1590 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1593 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1595 Merge in support for Mac MPW as a host.
1596 (Old change descriptions retained for informational value.)
1598 * mpw-config.in (archname): Compute from the config.
1599 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1601 * mpw-config.in (target_arch): Compute from canonical target.
1602 (m68k, mips, powerpc, sparc): Add architectures.
1603 * mpw-make.in (disassemble.c.o): Add.
1604 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1606 * mpw-config.in (BFD_MACHINES): Set to a default value.
1607 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1609 * mpw-make.in (CSEARCH): Add extra-include to search path.
1611 * mpw-config.in (varargs.h): Don't create.
1612 (sysdep.h): Create using forward-include.
1613 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1615 * mpw-config.in: New file, MPW version of configure.in.
1616 * mpw-make.in: New file, MPW version of Makefile.in.
1619 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1621 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1622 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1623 (print_insn_*): Pass bfd mach number, not opcode version.
1624 * arc-opc.c (arc_get_opcode_mach): New function.
1627 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1629 * alpha-dis.c (print_insn_alpha): Put empty statement after
1632 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1634 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1635 (low_sign_extend): Likewise.
1636 (get_field): Delete unused function.
1637 (set_field, deposit_14, deposit_21): Likewise.
1639 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1641 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1644 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1646 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1648 * alpha-opc.h (OSF_ASMCODE): define
1649 print pal-code names as defined in App C of the
1650 Alpha Architecture Reference Manual
1652 * alpha-dis.c: cleaned up output
1653 print stylized code forms as defined in App A.4.3 of the
1654 Alpha Architecture Reference Manual
1656 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1658 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1660 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1663 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1665 * m68k-dis.c (opcode): New function. Returns address of opcode
1666 table entry given index, even if the opcode table was split to
1667 work around gcc bugs.
1668 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1670 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1671 (reg_names): Now const.
1672 (print_insn_arg): Arrays cacheFieldName and names now const.
1673 (print_indexed): Array scales now const.
1676 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1678 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1679 (print_insn_arc_{host,graphics,audio}): Likewise.
1680 (print_insn): Add prototype.
1681 (arc_get_disassembler): New arg `big_p'. Return little or big
1682 print fn accordingly.
1683 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1684 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1685 (arc_opval_supported): Likewise.
1686 * disassemble.c (disassembler): Pass big endian flag to
1687 arc_get_disassembler.
1690 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1692 * ppc-opc.c: Sort recently added instructions by minor opcode
1693 number within major opcode number.
1695 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1697 * hppa-dis.c: Include libhppa.h.
1699 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1701 * mips-opc.c: Change dli to use M_DLI, and add dla.
1703 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1705 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1708 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1710 * arc-dis.c (arc_get_disassembler): Change argument to int,
1711 one of bfd_mach_arc_xxx. All callers updated.
1714 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1716 * mips-opc.c: Add r4650 mul instruction.
1718 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1720 * mips-opc.c: Add uld and usd macros for unaligned double load and
1723 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1725 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1726 mfdcr, mtdcr, icbt, iccci.
1729 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1731 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1732 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1733 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1734 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1735 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1736 (insert_absaddr): New function.
1738 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1740 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1741 New argument `cpu', pass it to arc_opcode_init_tables.
1742 Document byte order dependencies. Ignore unsupported insns.
1743 (arc_get_disassembler): New function.
1744 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1745 print_insn_arc_audio): New functions.
1746 * arc-opc.c (MULTSHIFT operand): Delete.
1747 (UNSIGNED, SATURATION): New operands.
1748 (mac, mul, mul64, mulu64): New insns.
1749 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1750 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1751 (host,graphics,audio extended and auxiliary regs): Define.
1752 (ss, sc, mh, ml): New suffixes.
1753 (arc_opcode_supported, arc_opval_supported): New functions.
1754 (insert_multshift, extract_multshift): Deleted.
1755 * disassemble.c (disassembler, case bfd_arch_arc): Call
1756 arc_get_disassembler to get disassembler routine.
1759 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1761 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1762 signed char fields to shorts, more portable.
1764 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1766 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1767 char fields as signed chars, since they may have negative values.
1769 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1771 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1772 (mycroft@netbsd.org).
1774 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1776 From "Logg, Ed" <elogg@ea.com>:
1777 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1778 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1781 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1783 * ppc-opc.c: Changes based on patch from David Edelsohn
1784 <edelsohn@mhpcc.edu>.
1785 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1788 (insert_tbr): New static function.
1789 (extract_tbr): New static function.
1790 (XFXFXM_MASK, XFXM): Define.
1791 (XSPRBAT_MASK, XSPRG_MASK): Define.
1792 (powerpc_opcodes): Add instructions to access special registers by
1793 name. Add mtcr and mftbu.
1795 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1797 * mips-opc.c (P3): Define.
1798 (mips_opcodes): Add mad and madu.
1800 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1802 * configure.in: Add W65 support.
1803 * disassemble.c: Likewise.
1804 * w65-opc.h, w65-dis.c: New files.
1806 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1808 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1812 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1814 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1816 * arc-opc.c (extract_reladdr): New function.
1817 (insert_reladdr): Store address right-shifted by 2.
1820 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1822 * mips-opc.c: Add dli as a synonym for li.
1825 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1827 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1829 (extraction fns): Insn argument now array of two words. Return pointer
1830 to value's table entry. All uses changed.
1831 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1832 (insert_multshift, extract_multshift): New fns.
1833 (arc_operands): Add support for cache bypass suffix. Add support for
1834 predefined aux regs. Modifier bits moved to flags field.
1835 (arc_opcodes): Likewise.
1836 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1837 New insn rlc. Update to syntax in programmer's manual.
1838 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1839 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1841 (arc_opcode_init_tables): New argument to indicate cpu type.
1842 (insert_reg): Handle predefined aux regs.
1843 (extract_reg): Likewise.
1844 (lookup_register): New fn.
1845 * arc-dis.c (arc_condition_codes): Deleted.
1846 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1847 Clean up modifier handling. Handle predefined aux regs.
1850 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1852 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1853 print something for reserved opcode values, even if it won't
1856 * mips-dis.c (_print_insn_mips): When initializing, shift right
1857 and mask, to avoid sign extension problems on the Alpha.
1859 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1863 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1865 * configure.in: Add ARC support.
1866 * disassemble.c: Likewise.
1867 * arc-dis.c, arc-opc.c: New files.
1870 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1872 * sh-opc.h (mov.l gbr): Get direction right.
1873 * sh-dis.c (print_insn_shx): New function.
1874 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1875 print opcodes with right byte order.
1877 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1879 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1880 to avoid conflicts with getopt.
1882 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1884 * hppa-dis.c (print_insn_hppa): Read the instruction using
1885 bfd_getb32, so that it works on a little endian or 64 bit host.
1886 Remove unused local variable op.
1888 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1890 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1891 addu does not work correctly if -mips3.
1893 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1895 * a29k-dis.c (print_special): Add special register names defined
1896 on 29030, 29040 and 29050.
1897 (print_insn): Handle new operand type 'I'.
1899 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1901 * Makefile.in (INSTALL): Use top level install.sh script.
1903 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1905 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1906 that it works on a little endian host.
1908 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1910 * configure.in: Use ${config_shell} when running config.bfd.
1912 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1914 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1916 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1918 * a29k-dis.c (print_insn): Print the opcode.
1920 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1922 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1924 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1926 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1928 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1930 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1931 which store a value into memory.
1933 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1935 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1936 * arm-dis.c, arm-opc.h: New files.
1938 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1940 * Makefile.in (ns32k-dis.o): Add dependency.
1941 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1942 string, not as array of chars.
1944 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1946 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1948 * sparc-opc.c: Added sparclite extended FP operations, and
1949 versions of v9 impdep* instructions permitting specification of
1952 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1954 * i960-dis.c (reg_names): Now const.
1955 (struct sparse_tabent): New type, copied from array type in mem
1957 (ctrl): Local static array ctrl_tab now const.
1958 (cobr): Local static array cobr_tab now const.
1959 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1960 static variable mem_tab no longer explicitly initialized. Changed
1961 mem_init to const array of struct sparse_tabent.
1962 (reg): Local static variable reg_tab no longer explicitly
1963 initialized. Changed reg_init to const array of struct
1965 (ea): Local static array scale_tab now const.
1967 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1970 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1972 * configure.bat: the disassember needs to be enabled for
1973 "objdump -d" to work in djgpp.
1975 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1977 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1978 (invalid_float): Enabled general version, doesn't require running
1979 on ns32k host. Changed to take char* argument, and test for
1980 explicitly specified sizes, instead of using sizeof() on host CPU
1982 (INVALID_FLOAT): Cast first argument.
1983 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1984 list_P032, list_M032): Now const.
1985 (optlist, list_search): Made appropriate arguments now point to
1987 (print_insn_arg): Changed static array of one-character-string
1988 pointers into a static const array of characters; fixed sprintf
1989 statement accordingly.
1991 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1993 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1994 from distribution. A ns32k-dis.c from a previous distribution has
1995 been brought up to date and supports the new interface.
1997 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1999 * configure.in: add bfd_ns32k_arch target support.
2001 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2002 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2004 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2006 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2009 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2011 * h8300-dis.c, mips-dis.c: Don't use true and false.
2013 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2015 * configure.in: Change --with-targets to --enable-targets.
2017 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2019 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2020 opcodes to the first instruction with that opcode, to speed
2021 disassembly of large files. From ralphc@pyramid.com (Ralph
2024 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2026 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2028 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2030 * configure.bat: update to latest makefile.in
2032 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2034 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2035 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2036 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2037 slot insn is in a delay slot.
2038 * z8k-opc.h: (resflg): Fix patterns.
2039 * h8500-opc.h Fix CR insn patterns.
2041 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2043 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2044 "cmpl" before POWER versions, so that gas -many uses them.
2046 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2048 * disassemble.c: New file.
2049 * Makefile.in (OFILES): Add disassemble.o.
2050 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2051 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2052 binutils/configure.in.
2054 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2055 opcode being examined.
2057 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2059 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2060 (insert_ral, insert_ram, insert_ras): New functions.
2061 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2062 RAS for store with update.
2064 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2066 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2067 (edelsohn@npac.syr.edu).
2069 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2071 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2074 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2076 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2078 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2080 * ppc-opc.c (powerpc_operands): The signedp field has been
2081 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2082 instead. Add new operand SISIGNOPT.
2083 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2084 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2085 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2088 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2090 * i386-dis.c (struct private): Renamed to dis_private. `private'
2091 is a reserved word for dynix cc.
2093 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2095 * configure.in: Change error message to refer to bfd/config.bfd
2096 rather than bfd/configure.in.
2098 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2100 * ppc-opc.c: Define POWER2 as short alias flag.
2101 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2104 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2106 * i960-dis.c (print_insn_i960): Don't read a second word for
2107 opcodes 0, 1, 2 and 3.
2109 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2111 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2113 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2115 * m68881-ext.c: Removed; no longer used.
2116 * Makefile.in: Changed accordingly.
2118 * m68k-dis.c (ext_format_68881): Don't declare.
2119 (print_insn_m68k): If an instruction uses place 'i', it uses at
2120 least four fixed bytes.
2121 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2122 extended float, convert to double using floatformat_to_double, not
2123 ieee_extended_to_double, and fetch the data before converting it.
2125 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2127 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2128 davidj@ICSI.Berkeley.EDU (David Johnson).
2130 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2132 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2133 PowerPC uses bdnz[l][a].
2135 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2137 * dis-buf.c, i386-dis.c: Include sysdep.h.
2139 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2141 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2143 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2144 by Motorola PowerPC 601 with PPC_OPCODE_601.
2145 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2146 Disassemble Motorola PowerPC 601 instructions as well as normal
2147 PowerPC instructions.
2149 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2151 * i960-dis.c (reg, mem): Just use a static array instead of
2154 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2156 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2157 condition name index if this is for a negated condition.
2159 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2160 Floating point format for 'H' operand is backwards from normal
2161 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2162 operands (fmpyadd and fmpysub), handle bizarre register
2163 translation correctly for single precision format.
2165 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2166 or 'I' operands if the next format specifier is 'M' (fcmp
2167 condition completer).
2169 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2171 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2172 single number giving a bitmask for the MB and ME fields of an M
2173 form instruction. Change NB to accept 32, and turn it into 0;
2174 also turn 0 into 32 when disassembling. Seperated SH from NB.
2175 (insert_mbe, extract_mbe): New functions.
2176 (insert_nb, extract_nb): New functions.
2177 (SC_MASK): Mask out SA and LK bits.
2178 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2179 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2180 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2181 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2182 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2183 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2184 (powerpc_macros): Define table of macro definitions.
2185 (powerpc_num_macros): Define.
2187 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2188 if PPC_OPERAND_NEXT is set.
2190 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2192 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2193 char. Retrieve contents using bfd_getl32 instead of shifting.
2195 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2197 * ppc-opc.c: New file. Opcode table for PowerPC, including
2198 opcodes for POWER (RS/6000).
2199 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2200 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2201 (CFILES): Add ppc-dis.c.
2202 (ppc-dis.o, ppc-opc.o): New targets.
2203 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2205 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2207 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2208 No space before 'u', 'f', or 'N'.
2210 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2212 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2213 farther than we should.
2215 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2217 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2219 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2221 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2223 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2224 needs it, to prevent reading past the end of a section.
2226 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2228 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2229 Removed t,A case for la; always use t,A(b) case.
2231 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2233 From Ted Lemen <mellon@pepper.ncd.com>
2234 * mips-dis.c (print_insn_arg): Handle 'k'.
2235 * mips-opc.c: Make cache use k, not t.
2237 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2239 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2240 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2241 FLOAT_FORMAT_CODE to put out floating point register names.
2243 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2245 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2247 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2249 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2251 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2253 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2254 larger than 32. Moved dsxx32 variants first for disassembler.
2256 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2258 * z8kgen.c, z8k-opc.h: Add full lda information.
2260 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2262 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2263 movb instructions. Any necessary space will be emitted by
2264 the code to handle nullification completers.
2266 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2268 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2270 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2272 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2273 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2275 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2277 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2279 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2281 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2282 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2284 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2286 * m88k-dis.c (m88kdis): comment change. Remove space after
2288 (printop): handle new arg types DEC and XREG for m88110.
2290 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2292 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2293 type for absolute branch addresses. Delete special
2294 "ble" and "be" code in 'W' operand code.
2296 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2298 * mips-opc.c: Set hazard information correctly for branch
2299 likely instructions.
2301 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2303 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2304 info->fprintf_func for printing and info->print_address_func for
2307 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2309 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2311 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2313 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2314 Corrected second case of "b" for disassembler.
2316 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2318 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2319 to BFD swapping routines to correspond to BFD name changes.
2321 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2323 * mips-opc.c: Change div machine instruction to be z,s,t rather
2324 than s,t. Change div macro to be d,v,t rather than d,s,t.
2325 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2326 rem and remu which generates only the corresponding div
2327 instruction. This is for compatibility with the MIPS assembler,
2328 which only generates the simple machine instruction when an
2329 explicit destination of $0 is used.
2330 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2332 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2334 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2335 WR_31 hazard for bal, bgezal, bltzal.
2337 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2339 * hppa-dis.c (print_insn_hppa): Use print function
2340 from within the disassemble_info, not fprintf_filtered.
2342 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2344 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2345 Law, law@cs.utah.edu.)
2347 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2349 * mips-opc.c ("absu"): Removed.
2352 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2354 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2355 Changed hazard information to distinguish between memory load
2356 delays and coprocessor load delays.
2358 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2360 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2362 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2364 * configure.in: Don't pass cpu to config.bfd.
2366 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2368 * m88k-dis.c (m88kdis): Make class unsigned.
2370 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2372 * alpha-dis.c (print_insn_alpha): One branch format case was
2373 missing the instruction name.
2375 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2377 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2378 Add the arch-specific auxiliary files.
2379 (OFILES): Remove the arch-specific auxiliary files
2380 and use BFD_MACHINES instead of DIS_LIBS.
2381 * configure.in: Set BFD_MACHINES based on --with-targets option.
2383 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2385 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2388 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2390 * sparc-opc.c: Change CONST to const to deal with gcc
2391 -Dconst=__const -traditional.
2393 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2395 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2396 coprocessor instructions out of #if 0, and made them use new
2399 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2401 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2403 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2405 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2406 instruction, for use by the disassembler.
2408 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2409 hand-coded sign extensions that depended on 32-bit host ints.
2410 FIXME, we still depend on big-endian host bitfield ordering.
2411 (sparc_print_insn): Set the insn_info_valid field, and the
2412 other fields that describe the instruction being printed.
2414 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2416 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2417 `jmp' instead of just one of them.
2419 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2421 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2422 (fput_fp_reg_r): Renamed from fput_reg_r.
2423 (fput_fp_reg): New function.
2424 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2426 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2428 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2430 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2432 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2434 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2435 don't output a space.
2437 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2439 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2441 * mips-opc.c: New file, containing opcode table from
2442 ../include/opcode/mips.h.
2443 * Makefile.in: Add it.
2445 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2447 * m88k-dis.c: New file, moved in from gdb and changed to use the
2448 new dis-asm.h disassembler interface.
2449 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2450 (m88k-dis.o): New target.
2452 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2454 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2455 argument string const char * to correspond to opcode/mips.h.
2457 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2459 * mips-dis.c: Updated to account for name changes in new version
2461 * Makefile.in: Added header file dependencies.
2463 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2465 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2467 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2469 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2470 extend, rather than shifts.
2472 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2474 * Makefile.in: Undo 15 June change.
2476 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2478 * m68k-dis.c (print_insn_arg): Change return value to byte count
2480 * m68k-dis.c: Re-write to detect invalid operands before
2481 printing anything, so we can handle this the same way we
2482 handle invalid opcodes.
2484 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2486 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2488 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2490 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2493 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2495 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2497 * configure.in: Do make sysdep.h link.
2498 * Makefile.in: Search ../include. Don't search ../bfd.
2500 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2502 Changes from Jeff Law, law@cs.utah.edu:
2503 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2504 Do not print a space before the completers specified by
2507 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2509 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2510 defined, since gdb has been fixed.
2512 Changes from Jeff Law, law@cs.utah.edu:
2513 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2514 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2515 be a *disassemble_info, not a *FILE.
2516 * hppa-dis.c: Support 'd', '!', and 'a'.
2517 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2518 * hppa-dis.c: Delete cases which are no longer needed.
2520 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2522 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2524 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2526 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2529 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2531 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2532 * configure.in: No longer need to configure to get sysdep.h.
2534 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2536 * Patches from Jeffrey Law <law@cs.utah.edu>.
2537 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2538 templates for 1.1 FP computational instructions.
2540 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2542 * h8500-dis.c (print_insn_h8500): Address argument is type
2544 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2547 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2548 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2550 * sparc-dis.c (compare_opcodes): Move static declaration to
2553 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2555 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2556 instruction, remove unimp hack from 'l' argument.
2558 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2560 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2563 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2565 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2566 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2569 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2571 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2572 arrays of string pointers to 2-d arrays of chars, to save
2575 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2577 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2578 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2580 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2582 * hppa-dis.c: New file from Utah, adapted to new disassembler
2584 * Makefile.in: Include it.
2586 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2588 * sh-dis.c, sh-opc.h: New files.
2590 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2592 * alpha-dis.c, alpha-opc.h: New files.
2594 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2596 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2599 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2601 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2603 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2605 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2608 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2610 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2611 and double percent signs a few places.
2613 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2615 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2616 Use info->print_address_func not print_address.
2618 * dis-buf.c (generic_print_address): New function.
2620 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2622 * Makefile.in: Add sparc-dis.c.
2623 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2625 Add `add' instruction to the set that get checked
2626 for a preceding `sethi' in order to print an absolute address.
2627 * (print_insn): Disassembly prefers real instructions.
2628 (is_delayed_branch): Speed up.
2629 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2630 Still missing some float ops, and needs testing.
2631 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2632 F_ALIAS. Use printf, not fprintf, when not passing a file
2634 (compare_opcodes): Check that identical instructions have
2635 identical opcodes, complain otherwise.
2638 * Include reg_names.
2640 Use dis-asm.h/read_memory_func interface.
2642 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2644 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2645 deliberately return non-zero to setjmp from longjmp. Otherwise
2646 this code fails to compile.
2648 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2650 * m68k-dis.c: Fix prototype for fetch_arg().
2652 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2654 * dis-buf.c: New file, for new read_memory_func interface.
2655 Makefile.in (OFILES): Include it.
2656 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2657 Use new read_memory_func interface.
2659 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2661 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2662 * h8500-opc.h: Fix couple of opcodes.
2664 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2666 * Makefile.in: add dvi & installcheck targets
2668 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2670 * Makefile.in: Update for h8500-dis.c.
2672 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2674 * h8500-dis.c, h8500-opc.h: New files
2676 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2678 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2679 ../include/dis-asm.h.
2680 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2681 and ../gdb/m68k-pinsn.c).
2682 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2683 and ../gdb/i386-pinsn.c).
2684 * m68881-ext.c: New file. Moved definition of
2685 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2686 * Makefile.in: Adjust for new files.
2687 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2688 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2689 can be dis-assembled.
2691 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2693 * mips-dis.c (print_insn_arg): Now returns void.
2695 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2697 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2698 files that use the macros.
2700 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2702 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2703 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2704 (CFILES): Added mips-dis.c.
2706 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2708 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2709 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2711 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2713 * Makefile.in: Improve *clean rules.
2714 * configure.in: Allow a default host.
2716 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2718 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2719 files include other sysdep files
2721 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2723 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2725 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2727 * configure.in: For host support, use ../bfd/configure.host
2728 so it stays in sync with the ../bfd/hosts database.
2730 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2732 * configure.in: use cpu-vendor-os triple instead of nested cases
2734 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2736 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2737 *always* the wrong one.
2739 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2741 * z8kgen.c: added copyright info
2743 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2745 * z8k-dis.c (unparse_instr): prettier tabs
2746 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2748 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2750 * configure.in: Add ncr* configuration.
2751 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2752 picayune ANSI compilers happy.
2754 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2756 * configure.in (i386): Make i386 and i486 synonymous for now.
2757 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2759 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2761 * Makefile.in (install): Fix typo.
2763 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2765 * Makefile.in (make): Remove obsolete crud.
2766 (sparc-opc.o): Avoid Sun Make VPATH bug.
2768 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2770 * Makefile.in: since there are no SUBDIRS, remove rule and
2771 references of subdir_do.
2773 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2775 * Makefile.in (install): Get the library name right here too.
2776 Don't install bfd.h, since it's unrelated to this library. No
2777 subdirs to recurse into, either.
2778 (CFILES): The source file has a .c suffix, not .o.
2780 * sparc-opc.c: New file, moved from BFD.
2781 * Makefile.in (OFILES): Build it.
2783 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2785 * z8k-dis.c: fixed forward refferences of some declarations.
2787 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2789 * Makefile.in: get the name of the library right
2791 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2793 * z8k-dis.c: knows how to disassemble z8k stuff
2794 * z8k-opc.h: new file full of z8000 opcodes
2798 version-control: never