1 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (print_insn): Check rex_ignored.
5 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
7 * i386-dis.c (ckprefix): Updated to return 0 if number of
8 prefixes > 14 and record the last position for each prefix.
9 (lock_prefix): Removed.
10 (data_prefix): Likewise.
11 (addr_prefix): Likewise.
12 (repz_prefix): Likewise.
13 (repnz_prefix): Likewise.
14 (last_lock_prefix): New.
15 (last_repz_prefix): Likewise.
16 (last_repnz_prefix): Likewise.
17 (last_data_prefix): Likewise.
18 (last_addr_prefix): Likewise.
19 (last_rex_prefix): Likewise.
20 (last_seg_prefix): Likewise.
21 (MAX_CODE_LENGTH): Likewise.
22 (ADDR16_PREFIX): Likewise.
23 (ADDR32_PREFIX): Likewise.
24 (DATA16_PREFIX): Likewise.
25 (DATA32_PREFIX): Likewise.
26 (REP_PREFIX): Likewise.
27 (seg_prefix): Likewise.
28 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
29 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
30 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
31 (get_valid_dis386): Updated.
33 (OP_Monitor): Likewise.
34 (REP_Fixup): Likewise.
35 (print_insn): Display all prefixes.
36 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
37 (intel_operand_size): Likewise.
38 (OP_E_register): Likewise.
45 (CRC32_Fixup): Likewise.
46 (MOVBE_Fixup): Likewise.
47 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
49 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
50 used_prefixes only if it is used.
52 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
54 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
55 or, sbb, sub, xor and xchg with register only operands.
56 * i386-tbl.h: Regenerated.
58 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
60 * i386-gen.c (opcode_modifiers): Add IsLockable.
62 * i386-opc.h (IsLockable): New.
63 (i386_opcode_modifier): Add islockable.
65 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
66 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
68 * i386-tbl.h: Regenerated.
70 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
72 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
73 generic coprocessor instructions for FPA loads and stores.
74 (print_insn_coprocessor): Remove %C support. Display address for
75 PC-relative offsets in %A.
77 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
79 * i386-dis.c (all_prefixes): New.
80 (ckprefix): Set all_prefixes.
81 (print_insn): Print all_prefixes instead of lock_prefix,
82 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
84 2009-11-11 Nick Clifton <nickc@redhat.com>
87 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
88 (print_insn_arm): Extend %s format control code to check for
89 unpredictable addressing modes. Add support for %S format control
90 code which suppresses this check.
91 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
92 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
93 PRE_BIT_SET): New macros.
94 (print_insn_coprocessor): Use the new macros instead of magic
96 (print_arm_address): Likewise.
97 (pirnt_insn_arm): Likewise.
98 (print_insn_thumb32): Likewise.
100 2009-11-11 Nick Clifton <nickc@redhat.com>
102 * po/id.po: Updated Indonesian translation.
104 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
106 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
108 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
110 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
111 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
112 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
114 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
117 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
118 Quentin Neill <quentin.neill@amd.com>
120 * opcodes/i386-dis.c (OP_LWPCB_E): New.
123 (USE_XOP_8F_TABLE): New.
125 (REG_XOP_LWPCB): New.
129 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
130 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
132 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
133 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
134 to access to the vex_table.
138 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
139 (cpu_flags): Add CpuLWP.
140 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
141 * opcodes/i386-opc.h (CpuLWP): New.
142 (i386_cpu_flags): Add bit cpulwp.
146 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
147 * opcodes/i386-opc.tbl (llwpcb): Added.
151 2009-11-04 DJ Delorie <dj@redhat.com>
153 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
154 (mvtcp, mvfcp, opecp): Remove.
155 * rx-decode.c: Regenerate.
156 * rx-dis.c (cpen): Remove.
158 2009-11-03 Doug Evans <dje@sebabeach.org>
160 * m32c-desc.c: Regenerate.
161 * mep-desc.c: Regenerate.
163 2009-11-02 Paul Brook <paul@codesourcery.com>
165 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
166 Add VFPv4 instructions.
168 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
170 * i386-dis.c (OP_VEX_FMA): Removed.
172 (Vex128FMA): Removed.
173 (prefix_table): First source operand of FMA4 insns is decoded
174 with Vex not with VexFMA.
175 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
176 when vex.w is set. Third source operand is decoded with
178 2009-10-27 Alan Modra <amodra@bigpond.net.au>
180 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
181 * Makefile.in: Regenerate.
182 * po/POTFILES.in: Regenerate.
184 2009-10-23 Doug Evans <dje@sebabeach.org>
186 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
187 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
188 * cgen-bitset.c: Update.
189 * fr30-desc.h: Regenerate.
190 * frv-desc.h: Regenerate.
191 * ip2k-desc.h: Regenerate.
192 * iq2000-desc.h: Regenerate.
193 * lm32-desc.h: Regenerate.
194 * m32c-desc.h: Regenerate.
195 * m32c-opc.h: Regenerate.
196 * m32r-desc.h: Regenerate.
197 * mep-desc.h: Regenerate.
198 * mt-desc.h: Regenerate.
199 * openrisc-desc.h: Regenerate.
200 * xc16x-desc.h: Regenerate.
201 * xstormy16-desc.h: Regenerate.
203 2009-10-22 DJ Delorie <dj@redhat.com>
205 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
206 * rx-decode.c: Regenerated.
208 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
211 * i386-dis.c: Document LB, LS and LV macros.
212 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
213 with the 64-bit displacement or immediate operand.
214 (putop): Handle LB, LS and LV macros.
216 2009-10-18 Doug Evans <dje@sebabeach.org>
218 * lm32-opinst.c: Regenerate.
219 * m32c-desc.c: Regenerate.
220 * m32r-opinst.c: Regenerate.
221 * openrisc-ibld.c: Regenerate.
222 * xc16x-desc.c: Regenerate.
223 * xc16x-desc.h: Regenerate.
225 2009-10-17 Doug Evans <dje@sebabeach.org>
227 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
228 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
229 sorted alphabetically.
230 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
231 stamp-* rules are sorted alphabetically.
232 * Makefile.in: Regenerate.
234 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
236 * i386-opc.h: Use enum instead of nested macros.
238 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
240 * i386-dis.c: Simplify enums.
242 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
243 Ineiev <ineiev@gmail.com>
246 * i386-dis.c: Use enum instead of nested macros.
248 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
250 * i386-dis.c (MAX_BYTEMODE): Removed.
252 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
255 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
257 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
259 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
262 2009-10-07 Michael Eager <eager@eagercon.com>
264 * microblaze-dis.c: Add include for microblaze-dis.h,
265 eliminate local extern decls.
266 * microblaze-dis.h: New.
268 2009-10-06 Nick Clifton <nickc@redhat.com>
270 * po/fi.po: Updated Finnish translation.
272 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
274 * opc2c.c: Include "libiberty.h" and <errno.h>.
275 (orig_filename): Constify.
276 (dump_lines): Fix line number directive.
277 (main): Set orig_filename to basename of input file. Use
280 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
281 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
282 instead of $(EXEEXT).
283 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
284 $(LINK_FOR_BUILD). Link with libiberty.
285 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
286 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
287 * Makefile.in: Regenerated.
288 * rx-decode.c: Regenerated.
290 2009-10-03 Paul Reed <paulreed@paddedcell.com>
292 * arm-dis.c (print_insn): Check symtab_size not *symtab.
294 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
296 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
297 * i386-tbl.h: Regenerated.
299 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
301 * ppc-dis.c (ppc_opts): Add "476" entry.
302 * ppc-opc.c (PPC476): Define.
303 (powerpc_opcodes): Update mnemonics where required for 476.
305 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
307 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
308 * ppc-dis.c (ppc_opts): Likewise.
309 Rename "ppca2" to "a2".
311 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
313 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
315 2009-09-29 DJ Delorie <dj@redhat.com>
317 * Makefile.am: Add RX files.
318 * configure.in: Add support for RX target.
319 * disassemble.c: Likewise.
320 * Makefile.in: Regenerate.
321 * configure: Regenerate.
323 * rx-decode.c: New file.
324 * rx-decode.opc: New file.
325 * rx-dis.c: New file.
327 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
329 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
330 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
332 2009-09-25 Michael Eager <eager@eagercon.com>
334 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
335 microblaze_decode_insn): Add declarations.
336 (get_delay_slots_microblaze): Remove.
338 2009-09-25 Martin Thuresson <martint@google.com>
340 Update sources to make arc and arm targets compile cleanly with
342 * arc-dis.c Fix casts.
343 * arc-ext.c: Add casts.
344 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
347 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
349 * i386-gen.c (opcode_modifiers): Remove Vex256.
350 (set_bitfield): Handle XXX=V.
352 * i386-opc.h (Vex): Update comments.
355 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
357 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
358 * i386-tbl.h: Regenerated.
360 2009-09-23 Nick Clifton <nickc@redhat.com>
362 * po/fr.po: Updated French translation.
364 2009-09-21 Ben Elliston <bje@au.ibm.com>
365 Peter Bergner <bergner@vnet.ibm.com>
367 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
368 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
369 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
370 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
372 (ERAT_T): New operand.
373 (XWC_MASK): New mask.
377 2009-09-18 Nick Clifton <nickc@redhat.com>
379 * po/es.po: Updated Spanish translation.
380 * po/vi.po: Updated Vietnamese translation.
382 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
384 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
387 2009-09-14 Nick Clifton <nickc@redhat.com>
389 * po/nl.po: Updated Dutch translation.
391 2009-09-11 Nick Clifton <nickc@redhat.com>
393 * po/opcodes.pot: Updated by the Translation project.
395 2009-09-11 Martin Thuresson <martint@google.com>
397 Updated sources to compile cleanly with -Wc++-compat:
398 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
399 * ldcref.c: Add casts.
400 * ldctor.c: Add casts.
402 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
403 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
404 * ldlang.h (enum statement_enum): Move to top level.
405 * ldmain.c: Add casts.
406 * ldwrite.c: Add casts.
407 * lexsup.c: Add casts. (enum control_enum): Move to top level.
408 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
410 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
412 * s390-dis.c (print_insn_s390): Avoid 'long long'.
414 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
416 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
417 (print_insn_s390): Signextend and shift pcrel operands before printing.
419 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
421 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
422 VEX_LEN_AE_R_X_M_0 in comments.
424 2009-09-08 DJ Delorie <dj@redhat.com>
426 * mep-opc.c: Regenerate.
428 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
430 * z8kgen.c (struct op): Replace unused flavor with id.
431 (opt): Remove extra xorb entry.
432 (func): Use id field as fallback.
433 (sub): Return new string, caller changed.
434 (internal): Allocate end marker. Assign unique id before sorting.
435 (gas): Likewise. Fix loop end condition.
436 * z8k-opc.h: Regenerate.
438 2009-09-08 Alan Modra <amodra@bigpond.net.au>
440 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
442 2009-09-07 Alan Modra <amodra@bigpond.net.au>
444 * z8kgen.c (func): Fix thinko last patch.
446 2009-09-07 Alan Modra <amodra@bigpond.net.au>
448 * z8kgen.c (func): Stabilize qsort of identically named entries.
449 * z8k-opc.h: Regenerate.
451 2009-09-07 Tristan Gingold <gingold@adacore.com>
453 * po/opcodes.pot: Regenerate.
455 2009-09-07 Alan Modra <amodra@bigpond.net.au>
457 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
458 * configure: Regenerate.
459 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
460 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
461 (i386-gen, ia64-gen, z8kgen): ..here.
462 * Makefile.in: Regenerate.
464 2009-09-07 Tristan Gingold <gingold@adacore.com>
466 * z8k-opc.h: Regenerate.
468 2009-09-05 Martin Thuresson <martin@mtme.org>
470 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
471 * m88k-dis.c (m88kdis): Rename variable class to in_class.
472 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
473 Rename argument class to symbol_class.
475 2009-09-04 Jie Zhang <jie.zhang@analog.com>
477 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
478 to the new encoding of DBGA, DBGAH, and DBGAL.
479 (_print_insn_bfin): Likewise.
481 2009-09-03 Jie Zhang <jie.zhang@analog.com>
483 * bfin-dis.c (_print_insn_bfin): Don't declare.
484 (print_insn_bfin): Don't declare.
485 (dregs_pair): Remove.
486 (ignore_bits): Remove.
489 2009-09-03 Jie Zhang <jie.zhang@analog.com>
491 * bfin-dis.c (IS_DREG): Define.
497 (decode_REGMV_0): Check illegal register move instructions.
499 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
501 * Makefile.am (BUILD_LIBINTL): New variable.
502 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
503 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
504 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
505 * Makefile.in: Regenerate.
507 2009-09-01 DJ Delorie <dj@redhat.com>
509 * mep-asm.c: Regenerate.
510 * mep-desc.c: Regenerate.
511 * mep-opc.c: Regenerate.
513 2009-09-01 Tristan Gingold <gingold@adacore.com>
515 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
516 dependencies. Remove unused FORMAT variable.
517 * configure.com: New file to create build.com DCL script for
518 Itanium VMS or Alpha VMS.
520 2009-08-29 Martin Thuresson <martin@mtme.org>
522 * cris-dis.c (bytes_to_skip): Update code to use new name.
523 * i386-dis.c (putop): Update code to use new name.
524 * i386-gen.c (process_i386_opcodes): Update code to use
526 * i386-opc.h (struct template): Rename struct template to
527 insn_template. Update code accordingly.
528 * i386-tbl.h (i386_optab): Update type to use new name.
529 * ia64-dis.c (print_insn_ia64): Rename variable template
531 * tic30-dis.c (struct instruction, get_tic30_instruction):
532 Update code to use new name.
533 * tic54x-dis.c (has_lkaddr, get_insn_size)
534 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
535 Update code to use new name.
536 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
537 Update type to new name.
538 * z8kgen.c (internal, gas): Rename variable new to new_op.
540 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
542 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
543 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
544 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
545 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
546 * Makefile.in: Regenerated.
548 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
550 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
551 [INSTALL_LIBBFD]: ... here, ...
552 [INSTALL_LIBBFD]: ... and empty overrides here.
553 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
554 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
555 * Makefile.in: Regenerate.
556 * configure: Regenerate.
558 2009-08-26 Philippe De Muyter <phdm@macqel.be>
560 * m68k-dis.c (print_insn_arg): Add movecr register names for
561 coldfire v4e families.
563 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
565 * Makefile.am (SUBDIRS): Build '.' before 'po'.
566 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
567 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
568 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
569 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
570 (i386-gen.o): New rule.
571 ($(srcdir)/i386-init.h): Adjust.
572 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
573 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
574 (ia64-gen.o): New rule.
575 (ia64_asmtab_deps): New variable.
576 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
577 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
578 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
580 (s390-opc.tab): Adjust.
581 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
583 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
584 * Makefile.in: Regenerate.
585 * z8kgen.c (gas): Avoid '/*' in comment.
586 * z8k-opc.h (func): Regenerate.
588 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
590 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
591 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
592 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
593 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
595 (LIBOPCODES_CFILES): New variable, adding to
596 TARGET_LIBOPCODES_CFILES also non-target library sources.
597 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
599 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
600 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
601 * Makefile.in: Regenerate.
602 * po/POTFILES.in: Regenerate.
604 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
606 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
607 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
608 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
609 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
610 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
611 is built shared even if it is not to be installed.
612 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
613 (install_libopcodes, uninstall_libopcodes): Remove.
614 (AM_CPPFLAGS): Renamed from ...
615 (INCLUDES): ... this.
616 * Makefile.in: Regenerate.
618 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
619 1.11, foreign, no-dist.
620 (MKDEP, m32c_opc_h): Remove variables.
621 (disassemble.lo): Rewrite using automake-style dependency
622 tracking rules; only list the dependency upon the primary source
623 file, but no included headers.
624 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
625 (i386-gen.o, ia64-gen.o): Remove dependency statements.
626 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
627 ensure all dependency fragments are included in the Makefile.
628 (s390-opc.lo): Depend on s390-opc.tab.
629 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
630 (mkdep section): Remove.
631 * Makefile.in: Regenerate.
632 * po/POTFILES.in: Regenerate.
634 * Makefile.am (install-pdf, install-html): Remove.
635 * Makefile.in: Regenerate.
637 * Makefile.in: Regenerate.
638 * aclocal.m4: Likewise.
639 * config.in: Likewise.
640 * configure: Likewise.
642 2009-08-06 Michael Eager <eager@eagercon.com>
644 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
645 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
646 * Makefile.in: Regenerate.
647 * configure.in: Add bfd_microblaze_arch target.
648 * configure: Regenerate.
649 * disassemble.c: Define ARCH_microblaze, return
650 print_insn_microblaze().
651 * microblaze-dis.c: New MicroBlaze disassembler.
652 * microblaze-opc.h: New MicroBlaze opcode definitions.
653 * microblaze-opcm.h: New MicroBlaze opcode types.
655 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
657 * configure.in: Handle bfd_l1om_arch.
658 * disassemble.c (disassembler): Likewise.
660 * configure: Regenerated.
662 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
663 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
665 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
667 (cpu_flags): Add CpuL1OM.
668 (set_bitfield): Take an argument to set the value field.
669 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
670 (process_i386_opcode_modifier): Updated.
671 (process_i386_operand_type): Likewise.
672 * i386-init.h: Regenerated.
673 * i386-tbl.h: Likewise.
675 * i386-opc.h (CpuL1OM): New.
677 (i386_cpu_flags): Add cpul1om.
679 2009-07-24 Jan Beulich <jbeulich@novell.com>
681 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
683 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
684 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
685 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
686 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
688 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
690 * i386-opc.tbl: Qualify floating point instructions by their
691 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
692 and fsincos to be avilable only on 387. Fix fstsw ax to be
693 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
695 * i386-init.h, i386-tbl.h: Regenerate.
697 2009-07-20 Nick Clifton <nickc@redhat.com>
700 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
701 offset or indexed based addressing mode 3.
703 2009-07-14 Nick Clifton <nickc@redhat.com>
706 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
708 (arm_decode_shift): Catch illegal register based shifts.
709 (print_insn_arm): Properly handle negative register r0
710 post-indexed addressing.
712 2009-07-10 Doug Kwan <dougkwan@google.com>
714 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
715 lower 32 bits of long types to make hexadecimal output consistent
716 on both 32-bit and 64-bit hosts.
718 2009-07-10 Alan Modra <amodra@bigpond.net.au>
720 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
721 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
722 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
723 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
724 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
725 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
726 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
727 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
728 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
729 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
730 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
731 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
733 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
735 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
737 2009-07-07 Nick Clifton <nickc@redhat.com>
740 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
743 2009-07-06 DJ Delorie <dj@redhat.com>
745 * mep-desc.c: Regenerate.
746 * mep-desc.h: Regenerate.
747 * mep-opc.c: Regenerate.
748 * mep-opc.h: Regenerate.
750 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
752 * i386-opc.h (CpuFMA4): Add CpuFMA4.
753 (i386_cpu_flags): New.
754 * i386-gen.c: Add CPU_FMA4_FLAGS.
755 * i386-opc.tbl: Add FMA4 instructions.
756 * i386-tbl.h: Regenerate.
757 * i386-init.h: Regenerate.
758 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
759 (OP_XMM_VexW): Ditto.
761 (VEXI4_Fixup): Ditto.
762 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
763 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
764 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
765 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
766 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
767 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
768 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
769 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
770 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
771 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
772 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
773 (get_vex_imm8): New. handle FMA4.
774 (OP_EX_VexReg): Ditto.
776 2009-06-30 Nick Clifton <nickc@redhat.com>
779 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
780 LFM and SFM instructions as comments,.
781 Improve consistency of formatting for instructions displayed as
782 comments and decimal values displayed with their hexadecimal
786 2009-06-29 Nick Clifton <nickc@redhat.com>
789 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
790 boundary between variaant and generic coprocessor instuctions.
791 (coprocessor): Use it.
792 Fix architecture version of MCRR and MRRC instructions.
793 (arm_opcdes): Fix patterns for STRB and STRH instructions.
794 (print_insn_coprocessor): Check architecture and extension masks.
795 Print a hexadecimal version of any decimal constant that is
796 outside of the range of -16 to +32.
797 (print_arm_address): Add a return value of the offset used in the
798 adress, if it is worth printing a hexadecimal version of it.
799 (print_insn_neon): Print a hexadecimal version of any decimal
800 constant that is outside of the range of -16 to +32.
801 (print_insn_arm): Likewise.
802 (print_insn_thumb16): Likewise.
803 (print_insn_thumb32): Likewise.
806 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
807 of an undefined instruction.
808 (arm_opcodes): Use it.
809 (thumb_opcod): Use it.
810 (thumb32_opc): Use it.
812 2009-06-23 DJ Delorie <dj@redhat.com>
814 * mep-desc.c: Regenerate.
815 * mep-desc.h: Regenerate.
816 * mep-dis.c: Regenerate.
817 * mep-ibld.c: Regenerate.
818 * mep-opc.c: Regenerate.
820 * mep-asm.c: Regenerate.
821 * mep-opc.c: Regenerate.
822 * mep-opc.h: Regenerate.
824 2009-06-22 Nick Clifton <nickc@redhat.com>
826 * po/fi.po: Updated Finish translation.
828 2009-06-22 Alan Modra <amodra@bigpond.net.au>
830 * m32c-asm.c: Regenerate.
832 2009-06-22 Alan Modra <amodra@bigpond.net.au>
834 * score-dis.c (print_insn_score48, print_insn_score32): Move default
835 case label to proper lexical block.
836 * score7-dis.c (print_insn_score32): Likewise.
838 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
840 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
841 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
842 * s390-opc.txt (nopr, nop): Use new instruction format.
844 2009-06-18 Nick Clifton <nickc@redhat.com>
847 * arm-dis.c (print_insn_coprocessor): Check that a user specified
848 ARM architecture supports the matched instruction.
849 (print_insn_arm): Likewise.
850 (select_arm_features): New function. Fills in the fields of an
851 arm_feature_set structure based on a given arm machine number.
852 (print_insn): Initialise an arm_feature_set structure.
854 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
856 * vax-dis.c (is_function_entry): Return success for synthetic
858 (is_plt_tail): New function.
859 (print_insn_vax): Decode PLT entry offset longword.
861 2009-06-15 Nick Clifton <nickc@redhat.com>
864 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
868 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
870 2009-06-15 Nick Clifton <nickc@redhat.com>
873 * arm-dis.c (print_insn): Ignore is_data if the user has requested
874 the disassembly of data as well as instructions.
876 2009-06-11 Doug Evans <dje@sebabeach.org>
878 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
880 2009-06-11 Anthony Green <green@moxielogic.com>
882 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
883 (moxie_form3_opc_info): Add branch instructions.
884 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
885 encoded instructions.
887 2009-06-06 Anthony Green <green@moxielogic.com>
889 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
890 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
892 2009-06-04 Alan Modra <amodra@bigpond.net.au>
894 * dep-in.sed: Don't use \n in replacement part of s command.
895 * Makefile.am (DEP1): LC_ALL for uniq.
896 * Makefile.in: Regenerate.
898 2009-06-02 Nick Clifton <nickc@redhat.com>
900 * po/nl.po: Updated Dutch translation.
902 2009-06-02 Tristan Gingold <gingold@adacore.com>
904 * ia64-gen.c (parse_resource_users, print_dependency_table,
905 add_dis_table_ent, finish_distable, insert_bit_table_ent,
906 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
907 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
908 insert_completer_entry, print_completer_entry, print_completer_table,
909 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
911 2009-05-28 DJ Delorie <dj@redhat.com>
913 * mep-asm.c: Regenerate.
914 * mep-desc.c: Regenerate.
916 2009-05-26 DJ Delorie <dj@redhat.com>
918 * mep-asm.c: Regenerate.
919 * mep-desc.c: Regenerate.
920 * mep-desc.h: Regenerate.
921 * mep-dis.c: Regenerate.
922 * mep-ibld.c: Regenerate.
923 * mep-opc.c: Regenerate.
924 * mep-opc.h: Regenerate.
926 2009-05-26 Nick Clifton <nickc@redhat.com>
928 * po/id.po: Updated Indonesian translation.
929 * po/opcodes.pot: Updated template file.
931 2009-05-26 Alan Modra <amodra@bigpond.net.au>
933 * dep-in.sed: Don't modify .o to .lo here. Output one filename
934 per line with all lines having continuation backslash. Prefix
935 first line with "A", following lines with "B".
936 * Makefile.am (DEP): Don't use dep.sed here.
937 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
938 dep.sed here on dependencies, sort and uniq.
939 * Makefile.in: Regenerate.
941 2009-05-25 Tristan Gingold <gingold@adacore.com>
943 * makefile.vms (OPT): New variable.
944 (CFLAGS): Update compilation flags.
946 2009-05-22 DJ Delorie <dj@redhat.com>
948 * mep-asm.c: Regenerate.
949 * mep-desc.c: Regenerate.
950 * mep-desc.h: Regenerate.
951 * mep-dis.c: Regenerate.
952 * mep-ibld.c: Regenerate.
953 * mep-opc.c: Regenerate.
954 * mep-opc.h: Regenerate.
956 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
958 * i386-opc.h (Cpusse5): Delete.
959 (i386_cpu_flags): Delete.
960 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
961 * i386-opc.tbl: Remove SSE5 instructions.
962 * i386-tbl.h: Regenerate.
963 * i386-init.h: Regenerate.
964 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
965 (print_drex_arg): Delete.
968 (OP_DREX_ICMP): Delete.
969 (OP_DREX_FCMP): Delete.
971 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
973 2009-05-22 Alan Modra <amodra@bigpond.net.au>
975 * Makefile.am: Run "make dep-am".
976 * Makefile.in: Regenerate.
977 * po/POTFILES.in: Regenerate.
979 2009-05-19 DJ Delorie <dj@redhat.com>
981 * mep-asm.c: Regenerate.
982 * mep-opc.c: Regenerate.
984 2009-04-30 DJ Delorie <dj@redhat.com>
986 * mep-asm.c: Regenerate.
987 * mep-desc.c: Regenerate.
988 * mep-desc.h: Regenerate.
989 * mep-dis.c: Regenerate.
990 * mep-ibld.c: Regenerate.
991 * mep-opc.c: Regenerate.
992 * mep-opc.h: Regenerate.
994 2009-04-17 DJ Delorie <dj@redhat.com
996 * mep-desc.c: Regenerate.
997 * mep-ibld.c: Regenerate.
998 * mep-opc.c: Regenerate.
999 * mep-opc.h: Regenerate.
1001 2009-04-15 Anthony Green <green@moxielogic.com>
1003 * moxie-opc.c, moxie-dis.c: Created.
1004 * Makefile.am: Build the moxie source files.
1005 * configure.in: Add moxie support.
1006 * Makefile.in, configure: Rebuilt.
1007 * disassemble.c (disassembler): Add moxie support.
1008 (ARCH_moxie): Define.
1010 2009-04-15 Jan Beulich <jbeulich@novell.com>
1012 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1014 (pshab, pshaw, pshad, pshaq): Likewise.
1015 * i386-tbl.h: Re-generate.
1017 2009-04-08 DJ Delorie <dj@redhat.com
1019 * mep-asm.c: Regenerate.
1020 * mep-desc.c: Regenerate.
1021 * mep-desc.h: Regenerate.
1022 * mep-dis.c: Regenerate.
1023 * mep-ibld.c: Regenerate.
1024 * mep-opc.c: Regenerate.
1025 * mep-opc.h: Regenerate.
1027 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1029 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1030 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1031 Reorder entries so the extended mnemonics are listed before tlbilx.
1033 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1035 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1037 (print_insn_powerpc): Make sure we only deprecate instructions using
1038 the original dialect and not a modified dialect due to -Many handling.
1039 Move the handling of the condition register and default operands to
1040 the end of the if/else if/else chain.
1041 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1042 instructions from newer processors are listed before older ones.
1043 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1044 that have instructions with conflicting opcodes.
1046 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1048 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1051 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1053 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1055 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1057 * arm-dis.c (print_insn): Also check section matches in backwards
1058 search for mapping symbol.
1060 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1062 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1064 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1066 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1067 * Makefile.am: Run "make dep-am".
1068 * Makefile.in: Regenerate.
1069 * openrisc-opc.c: Regenerate.
1071 2009-03-10 Nick Clifton <nickc@redhat.com>
1073 * po/id.po: Updated Indonesian translation.
1075 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1077 * ppc-dis.c: Include "opintl.h".
1078 (struct ppc_mopt, ppc_opts): New.
1079 (ppc_parse_cpu): New function.
1080 (powerpc_init_dialect): Use it.
1081 (print_ppc_disassembler_options): Dump options from ppc_opts.
1082 Internationalize message.
1084 2009-03-06 Nick Clifton <nickc@redhat.com>
1086 * po/es.po: Updated Spanish translation.
1088 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1091 * configure.in: Test for ld --as-needed support. Link shared
1092 libopcodes against libm.
1093 * configure: Regenerate.
1095 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1097 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1098 instructions from newer processors are listed before older ones.
1100 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1102 * Makefile.am: Run "make dep-am".
1103 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1105 * Makefile.in: Regenerate.
1107 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1109 * score7-dis.c: New file.
1110 * Makefile.am: Add dependencies for score7-dis.c.
1111 * Makefile.in: Regenerate.
1112 * configure.in: Add score7-dis to score files.
1113 * configure: Regenerate.
1114 * score-dis.c: Add support for score7 architecture.
1115 * score-opc.h: Likewise.
1117 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1119 * configure: Regenerate.
1121 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1123 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1125 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1127 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1128 the power7 and the isel instructions.
1129 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1130 (insert_dm, extract_dm): Likewise.
1131 (XB6): Update comment to include XX2 form.
1132 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1133 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1134 (RemoveXX3DM): Delete.
1135 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1136 "mftgpr">: Deprecate for POWER7.
1137 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1138 "frsqrte.">: Deprecate the three operand form and enable the two
1139 operand form for POWER7 and later.
1140 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1141 <"waitsrv", "waitimpl">: Add extended opcodes.
1142 <"ldbrx", "stdbrx">: Enable for POWER7.
1143 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1144 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1145 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1146 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1147 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1148 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1149 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1150 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1151 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1152 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1153 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1154 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1155 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1156 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1157 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1158 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1159 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1160 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1161 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1162 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1163 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1164 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1165 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1166 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1167 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1168 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1169 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1170 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1171 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1172 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1173 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1174 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1175 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1176 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1177 "xxspltw", "xxswapd">: Add VSX opcodes.
1179 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1181 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1182 (operand_types): Remove Vex_Imm4.
1184 * i386-opc.h (Vex_Imm4): Removed.
1186 (i386_operand_type): Remove vex_imm4.
1188 * i386-opc.tbl: Remove Vex_Imm4 comments.
1189 * i386-init.h: Regenerated.
1190 * i386-tbl.h: Likewise.
1192 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1194 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1195 vq{r}shr{u}n.s64 insnstructions.
1197 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1199 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1200 operand to be a float point register (FRT/FRS).
1202 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1204 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1205 dmfc2 and dmtc2 before the architecture-level variants.
1207 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1209 * fr30-opc.c: Regenerate.
1210 * frv-opc.c: Regenerate.
1211 * ip2k-opc.c: Regenerate.
1212 * iq2000-opc.c: Regenerate.
1213 * lm32-opc.c: Regenerate.
1214 * m32c-opc.c: Regenerate.
1215 * m32r-opc.c: Regenerate.
1216 * mep-opc.c: Regenerate.
1217 * mt-opc.c: Regenerate.
1218 * xc16x-opc.c: Regenerate.
1219 * xstormy16-opc.c: Regenerate.
1220 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1223 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1225 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1227 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1229 * ppc-opc.c: Update copyright year.
1230 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1231 ordering for POWER4 and later and use the correct Server ordering.
1233 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1235 AVX Programming Reference (January, 2009)
1236 * i386-dis.c (PREFIX_VEX_3A44): New.
1237 (VEX_LEN_3A44_P_2): Likewise.
1238 (PREFIX_VEX_3A48): Updated.
1239 (VEX_LEN_3A4C_P_2): Likewise.
1240 (prefix_table): Add PREFIX_VEX_3A44.
1241 (vex_table): Likewise.
1242 (vex_len_table): Add VEX_LEN_3A44_P_2.
1244 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1245 * i386-tbl.h: Regenerated.
1247 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1249 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1250 (mips_arch_choices): Add XLR entry.
1251 * mips-opc.c (XLR): Define.
1252 (mips_builtin_opcodes): Add XLR instructions.
1254 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1256 * Makefile.am: Add install-pdf target.
1257 * po/Make-in: Add install-pdf target.
1258 * Makefile.in: Regenerate.
1260 2009-02-02 DJ Delorie <dj@redhat.com>
1262 * mep-asm.c: Regenerate.
1263 * mep-desc.c: Regenerate.
1264 * mep-desc.h: Regenerate.
1265 * mep-dis.c: Regenerate.
1266 * mep-ibld.c: Regenerate.
1267 * mep-opc.c: Regenerate.
1268 * mep-opc.h: Regenerate.
1270 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1272 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1275 2009-01-28 Chao-ying Fu <fu@mips.com>
1277 * mips-opc.c (suxc1): Add the flag of FP_D.
1279 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1281 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1282 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1283 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1284 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1285 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1286 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1287 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1288 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1290 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1292 * configure.in (commonbfdlib): Delete.
1293 (SHARED_LIBADD): Add pic libiberty if such is available.
1294 * configure: Regenerate.
1295 * po/POTFILES.in: Regenerate.
1297 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1299 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1300 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1301 operand form and enable the four operand form for POWER6 and later.
1302 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1303 three operand form for POWER6 and later.
1305 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1307 * bfin-dis.c (OUTS): Use "%s" as format string.
1309 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1311 * i386-gen.c (cpu_flag_init): Remove a white space.
1312 (operand_type_init): Likewise.
1314 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1316 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1317 * i386-tbl.h: Regenerated.
1319 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1321 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1322 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1323 subS, xorS and cmpS.
1325 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1327 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1328 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1329 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1330 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1333 (set_bitfield): Take an argument, lineno. Don't report lineno
1334 on error if it is -1.
1335 (process_i386_cpu_flag): Take an argument, lineno.
1336 (process_i386_opcode_modifier): Likewise.
1337 (process_i386_operand_type): Likewise.
1338 (output_i386_opcode): Likewise.
1339 (opcode_hash_entry): Add lineno.
1340 (process_i386_opcodes): Updated.
1341 (process_i386_registers): Likewise.
1342 (process_i386_initializers): Likewise.
1344 * i386-opc.h (CpuP4): Removed.
1348 (CpuSYSCALL): Likewise.
1350 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1351 cpuclflush and cpusyscall.
1353 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1355 * i386-init.h: Regenerated.
1356 * i386-tbl.h: Likewise.
1358 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1360 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1361 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1362 (cpu_flags): Add CpuRdtscp.
1363 (set_bitfield): Remove CpuSledgehammer check.
1365 * i386-opc.h (CpuRdtscp): New.
1367 (i386_cpu_flags): Add cpurdtscp.
1369 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1370 * i386-init.h: Regenerated.
1371 * i386-tbl.h: Likewise.
1373 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1375 * ppc-opc.c (PPCNONE): Define.
1377 (powerpc_opcodes): Initialize the new "deprecated" field.
1379 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1381 AVX Programming Reference (December, 2008)
1382 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1383 (VEX_LEN_E7_P_2_M_0): Likewise.
1384 (VEX_LEN_2C_P_1): Updated.
1385 (VEX_LEN_E8_P_2): Likewise.
1386 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1387 (mod_table): Likewise.
1389 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1390 * i386-tbl.h: Regenerated.
1392 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1394 * i386-gen.c (process_copyright): Update for 2009.
1396 * i386-init.h: Regenerated.
1397 * i386-tbl.h: Likewise.
1399 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1401 AVX Programming Reference (December, 2008)
1402 * i386-dis.c (OP_VEX_FMA): Removed.
1403 (OP_EX_VexW): Likewise.
1404 (OP_EX_VexImmW): Likewise.
1405 (OP_XMM_VexW): Likewise.
1406 (VEXI4_Fixup): Likewise.
1407 (VPERMIL2_Fixup): Likewise.
1410 (Vex128FMA): Likewise.
1412 (EXdVexW): Likewise.
1413 (EXqVexW): Likewise.
1414 (EXVexImmW): Likewise.
1416 (VPERMIL2): Likewise.
1417 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1418 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1419 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1420 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1421 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1422 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1423 (get_vex_imm8): Likewise.
1424 (OP_EX_VexReg): Likewise.
1425 vpermil2_op): Likewise.
1427 (vex_w_dq_mode): Likewise.
1428 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1429 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1430 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1432 (PREFIX_VEX_38DB): Likewise.
1433 (PREFIX_VEX_3A4A): Likewise.
1434 (PREFIX_VEX_3A60): Likewise.
1435 (PREFIX_VEX_3ADF): Likewise.
1436 (VEX_LEN_3ADF_P_2): Likewise.
1437 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1438 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1439 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1440 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1441 PREFIX_VEX_3896...PREFIX_VEX_389F,
1442 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1443 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1444 (vex_table): Likewise.
1445 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1446 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1447 (putop): Support "%XW".
1448 (intel_operand_size): Handle vex_w_dq_mode.
1450 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1452 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1453 instructions. Add new FMA instructions.
1454 * i386-tbl.h: Regenerated.
1456 2009-01-02 Matthias Klose <doko@ubuntu.com>
1458 * or32-opc.c (or32_print_register, or32_print_immediate,
1459 disassemble_insn): Don't rely on undefined sprintf behaviour.
1461 For older changes see ChangeLog-2008
1467 version-control: never