1 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
4 operand specifiers in *save, *restore and movem* instructions.
6 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
9 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
10 register operands for immediate arithmetic, not, neg, negx, and
11 set according to condition instructions.
13 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
14 specifier of the effective-address operand in immediate forms of
15 arithmetic instructions. The specifier for the immediate operand
16 notes how and where the constant will be stored.
18 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
20 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
23 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
26 * mn10300-dis.c (disassemble): Prefix registers with '%'.
28 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
30 * mn10300-dis.c (disassemble): Handle register lists.
32 * mn10300-opc.c: Fix handling of register list operand for
33 "call", "ret", and "rets" instructions.
35 * mn10300-dis.c (disassemble): Print PC-relative and memory
36 addresses symbolically if possible.
37 * mn10300-opc.c: Distinguish between absolute memory addresses,
38 pc-relative offsets & random immediates.
40 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
42 (disassemble): Handle SPLIT and EXTENDED operands.
44 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
46 * mn10300-dis.c: Rough cut at printing some operands.
48 * mn10300-dis.c: Start working on disassembler support.
49 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
51 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
53 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
56 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
58 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
61 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
63 * mn10300-opc.c (mn10300_opcodes): Demand parens around
64 register argument is calls and jmp instructions.
66 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
68 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
69 getx operand. Fix opcode for mulqu imm,dn.
71 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
73 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
74 in MN10300_OPERAND_SPLIT operands for how many bits
75 appear in the basic insn word. Add IMM32_HIGH24,
76 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
77 (mn10300_opcodes): Use new operands as needed.
79 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
80 for bset, bclr, btst instructions.
81 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
83 * mn10300-opc.c (mn10300_operands): Remove many redundant
84 operands. Update opcode table as appropriate.
85 (IMM32): Add MN10300_OPERAND_SPLIT flag.
86 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
88 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
90 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
91 operands (for indexed load/stores). Fix bitpos for DI
92 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
93 few instructions that insert immediates/displacements in the
94 middle of the instruction. Add IMM8E for 8 bit immediate in
95 the extended part of an instruction.
96 (mn10300_operands): Use new opcodes as appropriate.
99 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
101 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
102 sequential so the assembler never parallelizes it with
106 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
108 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
109 a data/address register that appears in register field 0
110 and register field 1.
111 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
113 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
115 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
116 standard disassembly.
118 * alpha-opc.c (alpha_operands): Rearrange flags slot.
119 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
120 Recategorize PALcode instructions.
123 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
125 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
128 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
130 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
131 there are no operand types.
134 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
136 * v850-opc.c (D9_RELAX): Renamed from D9, all references
138 (v850_operands): Make sure D22 immediately follows D9_RELAX.
141 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
143 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
146 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
148 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
149 and sst.w instructions.
151 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
155 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
157 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
160 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
162 * ppc-opc.c (PPCPWR2): Define.
163 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
166 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
168 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
169 field for movhu instruction.
172 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
173 cast value to "long" not "signed long" to keep hpux10
177 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
179 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
182 * mn10300-opc.c (FMT*): Remove definitions.
184 * mn10300-opc.c (mn10300_opcodes): Fix destination register
185 for shift-by-register opcodes.
187 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
188 into [AD][MN][01] for encoding the position of the register
191 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
193 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
194 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
196 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
198 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
199 Fix various typos. Add "PAREN" operand.
201 (mn10300_opcodes): Surround all memory addresses with "PAREN"
202 operands. Fix several typos.
204 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
207 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
209 * mn10300-opc.c (FMT_XX): Renumber starting at one.
210 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
212 (mn10300_opcodes): Break opcode format out into its own field.
213 Update many operand fields to deal with signed vs unsigned
214 issues. Fix one or two typos in the "mov" instruction
215 opcode, mask and/or operand fields.
217 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
219 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
222 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
224 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
225 all opcodes. Very rough cut at operands for all opcodes.
227 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
230 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
232 * mn10200-opc.c, mn10300-opc.c: New files.
233 * mn10200-dis.c, mn10300-dis.c: New files.
234 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
235 * disassemble.c: Break mn10x00 support into 10200 and 10300
237 * configure.in: Likewise.
238 * configure: Rebuilt.
240 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
242 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
244 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
246 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
248 * disassemble (ARCH_mn10x00): Define.
249 (disassembler): Handle bfd_arch_mn10x00.
250 * configure.in: Recognize bfd_mn10x00_arch.
251 * configure: Rebuilt.
253 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
255 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
256 accordingly. Don't declare functions using op_rtn.
259 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
261 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
262 params to be more standard.
263 * (disassemble): Print absolute addresses and symbolic names for
264 branch and jump targets.
265 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
267 * (v850_opcodes): Add breakpoint insn.
270 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
272 * m68k-opc.c: Move the fmovemx data register cases before the
273 other cases, so that they get recognized before the data register
274 does gets treated as a degenerate register list.
276 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
278 * mips-opc.c: Add a case for "div" and "divu" with two registers
279 and a destination of $0.
281 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
283 * mips-dis.c (print_insn_arg): Add prototype.
284 (_print_insn_mips): Ditto.
286 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
288 * mips-dis.c (print_insn_arg): Print condition code registers as
291 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
293 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
296 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
298 * v850-dis.c (disassemble): Make static. Provide prototype.
300 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
302 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
305 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
307 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
308 ']' characters into the output stream.
309 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
310 Add "memop" field to all opcodes (for the disassembler).
311 Reorder opcodes so that "nop" comes before "mov" and "jr"
314 * v850-dis.c (print_insn_v850): Fix typo in last change.
316 * v850-dis.c (print_insn_v850): Properly handle disassembling
317 a two byte insn at the end of a memory region when the memory
318 region's size is only two byte aligned.
320 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
322 * v850-dis.c (v850_reg_names): Define.
323 (v850_sreg_names, v850_cc_names): Likewise.
324 (disassemble): Very rough cut at printing operands (unformatted).
326 * v850-opc.c (BOP_MASK): Fix.
327 (v850_opcodes): Fix mask for jarl and jr.
329 * v850-dis.c: New file. Skeleton for disassembler support.
330 * Makefile.in Remove v850 references, they're not needed here
331 and they weren't being sanitized away.
332 * configure.in: Add v850-dis.o when building v850 toolchains.
333 * configure: Rebuilt.
334 * disassemble.c (disassembler): Call v850 disassembler.
336 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
337 (insert_d8_6, extract_d8_6): New functions.
338 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
339 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
341 (IF4A, IF4B): Use "D7" instead of "D7S".
342 (IF4C, IF4D): Use "D8_7" instead of "D8".
343 (IF4E, IF4F): New. Use "D8_6".
344 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
345 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
347 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
348 (v850_operands): Change D16 to D16_15, use special insert/extract
349 routines. New new D16 that uses the generic insert/extract code.
350 (IF7A, IF7B): Use D16_15.
351 (IF7C, IF7D): New. Use D16.
352 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
354 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
355 message. Issue an error if the branch offset is odd.
357 * v850-opc.c: Add notes about needing special insert/extract
358 for all the load/store insns, except "ld.b" and "st.b".
360 * v850-opc.c (insert_d22, extract_d22): New functions.
361 (v850_operands): Use insert_d22 and extract_d22 for
363 (insert_d9): Fix range check.
365 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
367 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
368 and set bits field to D9 and D22 operands.
370 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
372 * v850-opc.c (v850_operands): Define SR2 operand.
373 (v850_opcodes): "ldsr" uses R1,SR2.
375 * v850-opc.c (v850_opcodes): Fix opcode specs for
376 sld.w, sst.b, sst.h, sst.w, and nop.
378 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
380 * v850-opc.c (v850_opcodes): Add null opcode to mark the
381 end of the opcode table.
385 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
387 * d10v-opc.c (pre_defined_registers): Added register pairs,
388 "r0-r1", "r2-r3", etc.
392 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
394 * v850-opc.c (v850_operands): Make I16 be a signed operand.
395 Create I16U for an unsigned 16bit mmediate operand.
396 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
398 * v850-opc.c (v850_operands): Define EP operand.
399 (IF4A, IF4B, IF4C, IF4D): Use EP.
401 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
402 with immediate operand, "movhi". Tweak "ldsr".
404 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
405 correct. Get sld.[bhw] and sst.[bhw] closer.
407 * v850-opc.c (v850_operands): "not" is a two byte insn
409 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
411 * v850-opc.c (v850_operands): D16 inserts at offset 16!
413 * v850-opc.c (two): Get order of words correct.
415 * v850-opc.c (v850_operands): I16 inserts at offset 16!
417 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
418 register source and destination operands.
419 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
421 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
422 same thinko in "trap" opcode.
424 * v850-opc.c (v850_opcodes): Add initializer for size field
427 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
428 Add D8 for 8-bit unsigned field in short load/store insns.
429 (IF4A, IF4D): These both need two registers.
430 (IF4C, IF4D): Define. Use 8-bit unsigned field.
431 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
432 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
433 for "ldsr" and "stsr".
434 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
437 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
438 short store word (sst.w).
440 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
442 * v850-opc.c (v850_operands): Added insert and extract fields,
443 pointers to functions that handle unusual operand encodings.
445 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
447 * v850-opc.c (v850_opcodes): Enable "trap".
449 * v850-opc.c (v850_opcodes): Fix order of displacement
450 and register for "set1", "clr1", "not1", and "tst1".
452 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
454 * v850-opc.c (v850_operands): Add "B3" support.
455 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
458 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
460 * v850-opc.c: Close unterminated comment.
462 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
464 * v850-opc.c (v850_operands): Add flags field.
465 (v850_opcodes): add move opcodes.
467 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
469 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
470 * configure: (bfd_v850v_arch) Add new case.
471 * configure.in: (bfd_v850_arch) Add new case.
472 * v850-opc.c: New file.
475 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
477 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
480 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
482 * d10v-opc.c: Add additional information to the opcode
483 table to help determinine which instructions can be done
487 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
489 * mpw-make.sed: Update editing of include pathnames to be
492 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
494 * arm-opc.h: Added "bx" instruction definition.
496 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
498 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
501 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
503 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
505 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
507 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
510 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
512 * makefile.vms: Update for alpha-opc changes.
514 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
516 * i386-dis.c (print_insn_i386): Actually return the correct value.
517 (ONE, OP_ONE): #ifdef out; not used.
520 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
522 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
523 Changed subi operand type to treat 0 as 16.
526 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
528 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
531 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
533 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
534 memory transfer instructions. Add new format string entries %h and %s.
535 * arm-dis.c: (print_insn_arm): Provide decoding of the new
539 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
541 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
542 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
545 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
547 * alpha-dis.c (print_insn_alpha_osf): Remove.
548 (print_insn_alpha_vms): Remove.
549 (print_insn_alpha): Make globally visible. Chose the register
550 names based on info->flavour.
551 * disassemble.c: Always return print_insn_alpha for the alpha.
554 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
556 * d10v-dis.c (dis_long): Handle unknown opcodes.
558 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
560 * d10v-opc.c: Changes to support signed and unsigned numbers.
561 All instructions with the same name that have long and short forms
562 now end in ".l" or ".s". Divs added.
563 * d10v-dis.c: Changes to support signed and unsigned numbers.
565 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
567 * d10v-dis.c: Change all functions to use info->print_address_func.
570 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
572 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
573 move ccr/sr insns more strict so that the disassembler only
574 selects them when the addressing mode is data register.
577 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
578 * d10v-opc.c (pre_defined_registers): Declare.
579 * d10v-dis.c (print_operand): Now uses pre_defined_registers
580 to pick a better name for the registers.
583 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
585 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
586 operands for fexpand and fpmerge. From Christian Kuehnke
587 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
589 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
591 * alpha-dis.c (print_insn_alpha): No longer the user-visible
592 print routine. Take new regnames and cpumask arguments.
593 Kill the environment variable nonsense.
594 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
595 (print_insn_alpha_vms): New function. Do VMS style regnames.
596 * disassemble.c (disassembler): Test bfd flavour to pick
597 between OSF and VMS routines. Default to OSF.
599 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
601 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
602 * configure: Rebuild.
603 * Makefile.in (install): Use @INSTALL_SHLIB@.
606 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
608 * configure: (bfd_d10v_arch) Add new case.
609 * configure.in: (bfd_d10v_arch) Add new case.
610 * d10v-dis.c: New file.
611 * d10v-opc.c: New file.
612 * disassemble.c (disassembler) Add entry for d10v.
615 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
617 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
618 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
620 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
622 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
623 distinguish between variants of the instruction set.
624 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
625 distinguish between variants of the instruction set.
627 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
629 * i386-dis.c (print_insn_i8086): New routine to disassemble using
630 the 8086 instruction set.
631 * i386-dis.c: General cleanups. Make most things static. Add
632 prototypes. Get rid of static variables aflags and dflags. Pass
633 them as args (to almost everything).
635 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
637 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
639 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
641 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
642 if the next arg is marked with SRC_IN_DST. Gross.
644 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
645 we're looking for and find EXR.
647 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
648 if we're looking for KBIT and we don't find it.
650 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
653 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
654 3bit immediate operands.
656 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
658 * Released binutils 2.7.
660 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
661 <kkaempf@progis.ac-net.de>.
663 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
665 * alpha-opc.c: Correct second case of "mov" to use OPRL.
667 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
669 * sparc-dis.c (print_insn_sparclite): New routine to print
670 sparclite instructions.
672 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
674 * m68k-opc.c (m68k_opcodes): Add coldfire support.
676 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
678 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
679 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
680 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
682 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
684 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
685 Use autoconf-set values.
686 (docdir, oldincludedir): Removed.
687 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
689 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
691 * alpha-opc.c: New file.
692 * alpha-opc.h: Remove.
693 * alpha-dis.c: Complete rewrite to use new opcode table.
694 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
695 * configure: Rebuild with autoconf 2.10.
696 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
697 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
699 (alpha-opc.o): New target.
701 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
703 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
704 Set imm_added_to_rs1 even if the source and destination register
707 * sparc-opc.c: Add some two operand forms of the wr instruction.
709 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
711 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
714 * disassemble.c (disassembler): Handle H8/S.
715 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
717 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
719 * sparc-opc.c: Add beq/teq as aliases for be/te.
721 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
722 <sergei@msil.sps.mot.com>.
724 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
726 * makefile.vms: New file.
728 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
730 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
732 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
735 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
737 * i386-dis.c (OP_OFF): Call append_prefix.
739 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
741 * ppc-opc.c (instruction encoding macros): Add explicit casts to
742 unsigned long to silence a warning from the Solaris PowerPC
745 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
747 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
749 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
751 * sparc-dis.c (X_IMM,X_SIMM): New macros.
753 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
754 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
755 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
756 cpush, cpusha, cpull sparclet insns.
758 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
760 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
762 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
764 * sparc-opc.c: Set F_FBR on floating point branch instructions.
765 Set F_FLOAT on other floating point instructions.
767 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
769 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
771 (powerpc_opcodes): Add 860/821 specific SPRs.
773 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
775 * configure.in: Permit --enable-shared to specify a list of
776 directories. Set and substitute BFD_PICLIST.
777 * configure: Rebuild.
778 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
779 uses. Set to @BFD_PICLIST@.
781 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
783 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
784 not "abs", which may be needed for the absolute in something
785 like btst #0,@10:8. Print L_3 immediates separately from other
786 immediates. Change ABSMOV reference to ABS8MEM.
788 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
790 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
791 (current_arch_mask): New static global.
792 (compute_arch_mask): New static function.
793 (print_insn_sparc): Delete sparc_v9_p. New static local
794 current_mach. Resort opcode table if current_mach changes.
795 Generalize "insn not supported" test.
796 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
797 Delete test for v9/!v9.
798 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
800 (brfc): Split into CBR and FBR for coprocessor/fp branches.
801 (brfcx): Renamed to FBRX.
802 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
803 coprocessor mnemonics are not supported on the sparclet).
804 (condf): Renamed to CONDF.
805 (SLCBCC2): Delete F_ALIAS flag.
807 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
809 * sparc-opc.c (sparc_opcodes): rd must be 0 for
810 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
812 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
814 * Makefile.in (config.status): Depend upon BFD VERSION file, so
815 that the shared library version number is set correctly.
817 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
819 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
820 Miles Bader <miles@gnu.ai.mit.edu>.
821 * configure: Rebuild.
823 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
825 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
828 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
830 * configure: Rebuild with autoconf 2.8.
832 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
834 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
835 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
837 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
839 * configure.in: Don't set SHLIB or SHLINK to an empty string,
840 since they appear as targets in Makefile.in.
841 * configure: Rebuild.
843 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
845 * mpw-make.sed: Edit out shared library support bits.
847 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
849 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
850 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
851 (sparc_opcodes): Add sparclet insns.
852 (sparclet_cpreg_table): New static local.
853 (sparc_{encode,decode}_sparclet_cpreg): New functions.
854 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
856 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
858 * i386-dis.c (index16): New static variable.
859 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
861 (OP_indirE): Return result of OP_E.
862 (OP_E): Check for 16 bit addressing mode, and disassemble
863 correctly. Optimised 32 bit case a little. Don't print
864 "(base,index,scale)" when sib specifies only an offset.
866 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
868 * configure.in: Set and substitute SHLIB_DEP.
869 * configure: Rebuild.
870 * Makefile.in (SHLIB_DEP): New variable.
871 (LIBIBERTY_LISTS, BFD_LIST): New variables.
872 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
873 COMMON_SHLIB, add them to piclist with appropriate modifications.
874 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
875 here: just use piclist.
877 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
879 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
880 (print_insn_sparc): Rewrite v9/not-v9 tests.
881 (compare_opcodes): Likewise.
882 * sparc-opc.c (MASK_<ARCH>): Define.
883 (v6,v7,v8,sparclite,v9,v9a): Redefine.
884 (sparclet,v6notv9): Define.
885 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
886 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
888 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
890 * configure.in: Call AC_PROG_CC before configure.host.
891 * configure: Rebuild.
893 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
895 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
897 * i386-dis.c (onebyte_has_modrm): New static array.
898 (twobyte_has_modrm): New static array.
899 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
901 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
903 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
906 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
908 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
911 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
913 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
914 m68010up, not just m68020up | cpu32.
916 * Makefile.in (SONAME): New variable.
917 ($(SHLINK)): Make a link to the transformed name, as well.
918 (stamp-tshlink): New target.
919 (install): Skip stamp-tshlink during install.
921 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
923 * configure.in: Call AC_ARG_PROGRAM.
924 * configure: Rebuild.
925 * Makefile.in (program_transform_name): New variable.
926 (install): Transform library name before installing it.
928 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
930 * i960-dis.c (mem): Add HX dcinva instruction.
932 Support for building as a shared library, based on patches from
933 Alan Modra <alan@spri.levels.unisa.edu.au>:
934 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
935 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
936 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
937 * configure: Rebuild.
938 * Makefile.in (ALLLIBS): New variable.
939 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
940 (COMMON_SHLIB, SHLINK): New variables.
941 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
942 (STAGESTUFF): Remove variable.
943 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
944 (stamp-piclist, piclist): New targets.
945 ($(SHLIB), $(SHLINK)): New targets.
946 ($(OFILES)): Depend upon stamp-picdir.
947 (disassemble.o): Build twice if PICFLAG is set.
948 (MOSTLYCLEAN): Add pic/*.o.
949 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
950 (distclean): Remove pic and stamp-picdir.
951 (install): Install shared libraries.
952 (stamp-picdir): New target.
954 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
956 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
957 Print unknown instruction as "unknown", rather than in hex.
959 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
961 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
963 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
965 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
967 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
969 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
970 when necessary. From Ulrich Drepper
971 <drepper@myware.rz.uni-karlsruhe.de>.
973 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
975 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
976 sparc_num_opcodes. Update architecture enum values.
977 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
978 (sparc_opcode_lookup_arch): New function.
979 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
980 (sparc_opcodes): Add v9a shutdown insn.
982 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
984 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
985 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
987 (print_insn_sparc64): Deleted.
988 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
991 * sparc-opc.c (architecture_pname): Add v9a.
993 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
995 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
996 incorrectly defined as 0x16 when it should be 0x15.
997 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
998 (alpha_insn_set): added cvtst and cvttq float ops. Also added
999 excb (exception barrier) which is defined in the Alpha
1000 Architecture Handbook version 2.
1001 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1002 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1003 disassembled as or, for example.
1005 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1007 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1008 (_print_insn_mips): Change i from int to unsigned int.
1010 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1012 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1013 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1015 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1017 * i386-dis.c: Added Pentium Pro instructions.
1019 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1021 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1024 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1026 * sh-opc.h (sh_nibble_type): Added REG_B.
1027 (sh_arg_type): Added A_REG_B.
1028 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1030 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1032 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1034 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1036 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1038 * Makefile.in (distclean): Remove stamp-h. From Ronald
1039 F. Guilmette <rfg@monkeys.com>.
1041 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1043 From David Mosberger-Tang <davidm@azstarnet.com>:
1044 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1047 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1049 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1050 (sh_table): Added many SH3 opcodes.
1051 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1053 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1055 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1056 (subco,subco.): Mark this PPC, not PPCCOM.
1058 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1060 * configure: Rebuild with autoconf 2.7.
1062 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1064 * configure: Rebuild with autoconf 2.6.
1066 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1068 * configure.in: Sort list of architectures. Accept but do nothing
1069 for alliant, convex, pyramid, romp, and tahoe.
1071 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1073 * a29k-dis.c (print_special): Change num to unsigned int.
1075 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1077 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1080 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1082 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1083 * configure: Rebuilt.
1085 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1087 * configure.in: Add case for bfd_i860_arch.
1088 * configure: Rebuild.
1090 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1092 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1093 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1094 (NEXTDOUBLE): Likewise.
1095 (print_insn_m68k): Don't match fmoveml if there is more than one
1096 register in the list.
1097 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1099 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1101 * m68k-opc.c: Use #W rather than #w.
1102 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1104 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1106 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1107 and likewise for all the dbxx opcodes.
1109 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1111 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1113 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1115 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1116 the VR4100 specific instructions to the mips_opcodes structure.
1118 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1120 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1121 ugly Metrowerks bug in CW6, is fixed in CW7.
1123 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1125 * ppc-opc.c (whole file): Add flags for common/any support.
1127 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1129 * Makefile.in (BISON): Remove macro.
1130 (FLAGS_TO_PASS): Remove BISON.
1132 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1134 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1136 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1137 instructions that take no args by looking at the match mask.
1138 (print_insn_arg): Always print "%" before register names.
1139 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1140 [case '_']: Don't print "@#" before address.
1141 [case 'J']: Use "%s" as format string, not register name.
1142 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1144 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1146 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1149 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1151 From David Mosberger-Tang <davidm@azstarnet.com>
1153 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1154 (alpha_insn_set): added definitions for VAX floating point
1155 instructions (Unix compilers don't generate these, but handcoded
1156 assembly might still use them).
1158 * alpha-dis.c (print_insn_alpha): added support for disassembling
1159 the miscellaneous instructions in the Alpha instruction set.
1161 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1163 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1164 no longer create sysdep.h, sed ppc-opc.c to work around a
1165 serious Metrowerks C bug.
1166 * mpw-make.in: Remove.
1167 * mpw-make.sed: New file, used by mpw-configure to edit
1168 Makefile.in into an MPW makefile.
1170 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1172 * Makefile.in (maintainer-clean): New synonym for realclean.
1174 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1176 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1177 which use '0', '1', and '2' instead. Specify the proper size for
1178 a pmove immediate operand. Correct the pmovefd patterns to be
1179 moves to a register, not from a register.
1180 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1182 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1184 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1185 %psr, %wim, %tbr as F_NOTV9.
1187 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1189 * Makefile.in (Makefile): Just rebuild Makefile when running
1191 (config.h, stamp-h): New targets.
1192 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1193 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1194 rebuilding config.h.
1195 * configure: Rebuild.
1197 * mips-opc.c: Change unaligned loads and stores with "t,A"
1198 operands to use "t,A(b)".
1200 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1202 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1204 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1206 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1207 until 3 instead of until 2.
1209 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1211 * Makefile.in (ALL_CFLAGS): Define.
1212 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1213 (MOSTLYCLEAN): Add config.log.
1214 (distclean): Don't remove config.log.
1215 * configure.in: Substitute HDEFINES.
1216 * configure: Rebuild.
1218 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1220 * sh-opc.h (sh_arg_type): Add F_FR0.
1221 (sh_table, case fmac): Add F_FR0 as first argument.
1223 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1225 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1227 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1229 * sparc-dis.c: Remove all references to NO_V9.
1231 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1233 * aclocal.m4: Just include ../bfd/aclocal.m4.
1234 * configure: Rebuild.
1236 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1238 * sparc-dis.c (X_DISP19): Define.
1239 (print_insn, case 'G'): Use it.
1240 (print_insn, case 'L'): Sign extend displacement.
1242 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1244 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1245 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1246 host_makefile_frag or frags.
1247 * aclocal.m4: New file.
1248 * configure: Rebuild.
1249 * Makefile.in (INSTALL): Set to @INSTALL@.
1250 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1251 (INSTALL_DATA): Set to @INSTALL_DATA@.
1253 (AR_FLAGS): Set to rc rather than qc.
1254 (CC): Define as @CC@.
1255 (CFLAGS): Set to @CFLAGS@.
1256 (@host_makefile_frag@): Remove.
1257 (config.status): Remove dependency upon @frags@.
1259 * configure.in: ../bfd/config.bfd now just sets shell variables.
1260 Use them rather than looking through target Makefile fragments.
1261 * configure: Rebuild.
1263 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1265 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1267 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1269 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1270 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1273 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1274 (lookup_{name,value}): New functions.
1275 (prefetch_table): New static local.
1276 (sparc_{encode,decode}_prefetch): New functions.
1277 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1279 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1281 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1284 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1286 * sh-dis.c: Correct comment on first line of file.
1288 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1290 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1292 * sparc-opc.c (asi, membar): New static locals.
1293 (sparc_{encode,decode}_{asi,membar}): New functions.
1294 (sparc_opcodes, membar insn): Fix.
1295 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1296 Support decoding of membar masks.
1299 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1301 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1303 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1305 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1306 and likewise for the other branches. Add bhs as an alias for bcc,
1307 and likewise for the size variants. Add dbhs as an alias for
1310 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1312 * sh-opc.h (FP sts instructions): Update to match reality.
1314 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1316 * m68k-dis.c: (fpcr_names): Add % before all register names.
1317 (reg_names): Likewise.
1318 (print_insn_arg): Don't explicitly print % before register names.
1319 Add % before register names in static array names. In case 'r',
1320 print data registers as `@(Dn)', not `Dn@'. When printing a
1321 memory address, don't print @# before it.
1322 (print_indexed): Change base_disp and outer_disp from int to
1323 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1324 syntax. Sign extend 8 byte displacement correctly.
1325 (print_base): Print using MIT syntax. Print zpc when appropriate.
1326 Change parameter disp from int to bfd_vma.
1328 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1331 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1333 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1334 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1335 * sh-opc.h (sh_arg_type): Add new operand types.
1336 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1338 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1340 * Makefile.in (distclean): Remove generated file config.h.
1342 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1344 * Makefile.in (distclean): Remove generated file config.h.
1346 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1348 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1350 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1352 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1353 rather than numopcodes. Use m68k_opcodes rather than removed
1354 opcode function. Don't check F_ALIAS.
1355 (print_insn_arg): Change first parameter to be const char *.
1356 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1357 (m68k-opc.o): New target.
1358 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1359 * configure: Rebuild.
1361 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1363 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1364 (opcode_bits, opcode_hash_table): New variables.
1365 (opcodes_initialized): Renamed from opcodes_sorted.
1366 (build_hash_table): New function.
1367 (is_delayed_branch): Use hash table.
1368 (print_insn): Renamed from print_insn_sparc, made static.
1369 Build and use hash table. If !sparc64, ignore sparc64 insns,
1370 and vice-versa if sparc64.
1371 (print_insn_sparc, print_insn_sparc64): New functions.
1372 (compare_opcodes): Move sparc64 opcodes to end.
1373 Print commutative insns with constant second.
1374 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1376 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1378 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1379 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1380 avoids printing a delay slot in a delay slot.
1381 * sh-opc.h (sh_table): Fully bracket last entry.
1383 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1385 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1387 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1389 * configure.in: Get host_makefile_frag from ${srcdir}.
1391 * configure.in: Autoconfiscated. Check for string[s].h. Create
1392 config.h from config.in. Don't set up sysdep.h link.
1393 * sysdep.h: New file.
1394 * configure, config.in: New files, generated from configure.in.
1395 * Makefile.in: Updated to be processed autoconf-style.
1396 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1397 (Makefile): Depend on config.status.
1398 (config.status): New rule.
1399 * configure.bat: Update Makefile substitutions.
1401 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1403 * mips-opc.c (L1): Define.
1404 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1405 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1408 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1410 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1411 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1412 have multiple add units but only a single logical unit.
1414 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1415 shifted by 18, without any insertion or extraction function.
1416 (insert_cr, extract_cr): Remove.
1419 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1421 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1424 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1426 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1429 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1431 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1432 * sh-opc.h: Add copyright.
1434 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1436 * Makefile.in (crunch-m68k): Delete extra target accidentally
1437 checked in a while ago.
1439 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1441 * sh-opc.h (sh_table): Add SH3 support.
1443 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1445 * sh-opc.h: Added bsrf and braf.
1447 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1449 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1450 bogus [ls]fm{ea,fd} patterns.
1452 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1453 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1454 initialize it from memory. Make function static.
1455 (print_insn_{big,little}_arm): New functions.
1456 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1457 the correct endianness.
1460 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1462 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1463 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1466 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1468 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1471 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1473 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1474 17th, so that it builds again using GCC as the compiler.
1476 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1478 * mips-dis.c (print_insn_little_mips): Cast return value from
1479 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1480 expects an unsigned long, and that might be fewer words of
1481 argument storage (e.g., if bfd_vma is long long on a 32-bit
1483 (print_insn_big_mips): Likewise with bfd_getb32 value.
1484 (_print_insn_mips): Now static.
1486 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1488 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1489 gcc memory hog problem with initializer is fixed.
1492 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1494 * arc-opc.c (NULL): Define.
1495 (arc_operands, insn fields u,s): Delete.
1496 (arc_operands, insn fields a,b,c): Mark as signed.
1497 (arc_opcodes): No longer const, links computed at run-time.
1498 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1499 suffixes that affect the insn code.
1500 (arc_opcodes): Resort table to macros are first.
1501 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1502 (arc_opcodes, st [b] entry): Likewise.
1503 (arc_opcodes, st [b,d] entry): Fix mask, value.
1504 (arc_reg_names): Add entries for r29, r30, r31, r60.
1505 (opcode_map, icode_map): New static globals.
1506 (arc_opcode_init_tables): Initialize them.
1507 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1508 (insert_shimmoffset): Signal error if register present.
1510 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1513 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1515 Merge in support for Mac MPW as a host.
1516 (Old change descriptions retained for informational value.)
1518 * mpw-config.in (archname): Compute from the config.
1519 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1521 * mpw-config.in (target_arch): Compute from canonical target.
1522 (m68k, mips, powerpc, sparc): Add architectures.
1523 * mpw-make.in (disassemble.c.o): Add.
1524 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1526 * mpw-config.in (BFD_MACHINES): Set to a default value.
1527 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1529 * mpw-make.in (CSEARCH): Add extra-include to search path.
1531 * mpw-config.in (varargs.h): Don't create.
1532 (sysdep.h): Create using forward-include.
1533 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1535 * mpw-config.in: New file, MPW version of configure.in.
1536 * mpw-make.in: New file, MPW version of Makefile.in.
1539 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1541 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1542 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1543 (print_insn_*): Pass bfd mach number, not opcode version.
1544 * arc-opc.c (arc_get_opcode_mach): New function.
1547 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1549 * alpha-dis.c (print_insn_alpha): Put empty statement after
1552 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1554 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1555 (low_sign_extend): Likewise.
1556 (get_field): Delete unused function.
1557 (set_field, deposit_14, deposit_21): Likewise.
1559 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1561 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1564 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1566 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1568 * alpha-opc.h (OSF_ASMCODE): define
1569 print pal-code names as defined in App C of the
1570 Alpha Architecture Reference Manual
1572 * alpha-dis.c: cleaned up output
1573 print stylized code forms as defined in App A.4.3 of the
1574 Alpha Architecture Reference Manual
1576 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1578 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1580 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1583 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1585 * m68k-dis.c (opcode): New function. Returns address of opcode
1586 table entry given index, even if the opcode table was split to
1587 work around gcc bugs.
1588 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1590 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1591 (reg_names): Now const.
1592 (print_insn_arg): Arrays cacheFieldName and names now const.
1593 (print_indexed): Array scales now const.
1596 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1598 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1599 (print_insn_arc_{host,graphics,audio}): Likewise.
1600 (print_insn): Add prototype.
1601 (arc_get_disassembler): New arg `big_p'. Return little or big
1602 print fn accordingly.
1603 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1604 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1605 (arc_opval_supported): Likewise.
1606 * disassemble.c (disassembler): Pass big endian flag to
1607 arc_get_disassembler.
1610 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1612 * ppc-opc.c: Sort recently added instructions by minor opcode
1613 number within major opcode number.
1615 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1617 * hppa-dis.c: Include libhppa.h.
1619 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1621 * mips-opc.c: Change dli to use M_DLI, and add dla.
1623 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1625 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1628 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1630 * arc-dis.c (arc_get_disassembler): Change argument to int,
1631 one of bfd_mach_arc_xxx. All callers updated.
1634 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1636 * mips-opc.c: Add r4650 mul instruction.
1638 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1640 * mips-opc.c: Add uld and usd macros for unaligned double load and
1643 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1645 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1646 mfdcr, mtdcr, icbt, iccci.
1649 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1651 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1652 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1653 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1654 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1655 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1656 (insert_absaddr): New function.
1658 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1660 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1661 New argument `cpu', pass it to arc_opcode_init_tables.
1662 Document byte order dependencies. Ignore unsupported insns.
1663 (arc_get_disassembler): New function.
1664 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1665 print_insn_arc_audio): New functions.
1666 * arc-opc.c (MULTSHIFT operand): Delete.
1667 (UNSIGNED, SATURATION): New operands.
1668 (mac, mul, mul64, mulu64): New insns.
1669 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1670 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1671 (host,graphics,audio extended and auxiliary regs): Define.
1672 (ss, sc, mh, ml): New suffixes.
1673 (arc_opcode_supported, arc_opval_supported): New functions.
1674 (insert_multshift, extract_multshift): Deleted.
1675 * disassemble.c (disassembler, case bfd_arch_arc): Call
1676 arc_get_disassembler to get disassembler routine.
1679 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1681 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1682 signed char fields to shorts, more portable.
1684 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1686 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1687 char fields as signed chars, since they may have negative values.
1689 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1691 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1692 (mycroft@netbsd.org).
1694 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1696 From "Logg, Ed" <elogg@ea.com>:
1697 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1698 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1701 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1703 * ppc-opc.c: Changes based on patch from David Edelsohn
1704 <edelsohn@mhpcc.edu>.
1705 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1708 (insert_tbr): New static function.
1709 (extract_tbr): New static function.
1710 (XFXFXM_MASK, XFXM): Define.
1711 (XSPRBAT_MASK, XSPRG_MASK): Define.
1712 (powerpc_opcodes): Add instructions to access special registers by
1713 name. Add mtcr and mftbu.
1715 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1717 * mips-opc.c (P3): Define.
1718 (mips_opcodes): Add mad and madu.
1720 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1722 * configure.in: Add W65 support.
1723 * disassemble.c: Likewise.
1724 * w65-opc.h, w65-dis.c: New files.
1726 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1728 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1732 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1734 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1736 * arc-opc.c (extract_reladdr): New function.
1737 (insert_reladdr): Store address right-shifted by 2.
1740 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1742 * mips-opc.c: Add dli as a synonym for li.
1745 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1747 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1749 (extraction fns): Insn argument now array of two words. Return pointer
1750 to value's table entry. All uses changed.
1751 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1752 (insert_multshift, extract_multshift): New fns.
1753 (arc_operands): Add support for cache bypass suffix. Add support for
1754 predefined aux regs. Modifier bits moved to flags field.
1755 (arc_opcodes): Likewise.
1756 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1757 New insn rlc. Update to syntax in programmer's manual.
1758 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1759 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1761 (arc_opcode_init_tables): New argument to indicate cpu type.
1762 (insert_reg): Handle predefined aux regs.
1763 (extract_reg): Likewise.
1764 (lookup_register): New fn.
1765 * arc-dis.c (arc_condition_codes): Deleted.
1766 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1767 Clean up modifier handling. Handle predefined aux regs.
1770 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1772 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1773 print something for reserved opcode values, even if it won't
1776 * mips-dis.c (_print_insn_mips): When initializing, shift right
1777 and mask, to avoid sign extension problems on the Alpha.
1779 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1783 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1785 * configure.in: Add ARC support.
1786 * disassemble.c: Likewise.
1787 * arc-dis.c, arc-opc.c: New files.
1790 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1792 * sh-opc.h (mov.l gbr): Get direction right.
1793 * sh-dis.c (print_insn_shx): New function.
1794 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1795 print opcodes with right byte order.
1797 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1799 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1800 to avoid conflicts with getopt.
1802 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1804 * hppa-dis.c (print_insn_hppa): Read the instruction using
1805 bfd_getb32, so that it works on a little endian or 64 bit host.
1806 Remove unused local variable op.
1808 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1810 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1811 addu does not work correctly if -mips3.
1813 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1815 * a29k-dis.c (print_special): Add special register names defined
1816 on 29030, 29040 and 29050.
1817 (print_insn): Handle new operand type 'I'.
1819 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1821 * Makefile.in (INSTALL): Use top level install.sh script.
1823 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1825 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1826 that it works on a little endian host.
1828 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1830 * configure.in: Use ${config_shell} when running config.bfd.
1832 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1834 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1836 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1838 * a29k-dis.c (print_insn): Print the opcode.
1840 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1842 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1844 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1846 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1848 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1850 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1851 which store a value into memory.
1853 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1855 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1856 * arm-dis.c, arm-opc.h: New files.
1858 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1860 * Makefile.in (ns32k-dis.o): Add dependency.
1861 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1862 string, not as array of chars.
1864 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1866 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1868 * sparc-opc.c: Added sparclite extended FP operations, and
1869 versions of v9 impdep* instructions permitting specification of
1872 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1874 * i960-dis.c (reg_names): Now const.
1875 (struct sparse_tabent): New type, copied from array type in mem
1877 (ctrl): Local static array ctrl_tab now const.
1878 (cobr): Local static array cobr_tab now const.
1879 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1880 static variable mem_tab no longer explicitly initialized. Changed
1881 mem_init to const array of struct sparse_tabent.
1882 (reg): Local static variable reg_tab no longer explicitly
1883 initialized. Changed reg_init to const array of struct
1885 (ea): Local static array scale_tab now const.
1887 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1890 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1892 * configure.bat: the disassember needs to be enabled for
1893 "objdump -d" to work in djgpp.
1895 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1897 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1898 (invalid_float): Enabled general version, doesn't require running
1899 on ns32k host. Changed to take char* argument, and test for
1900 explicitly specified sizes, instead of using sizeof() on host CPU
1902 (INVALID_FLOAT): Cast first argument.
1903 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1904 list_P032, list_M032): Now const.
1905 (optlist, list_search): Made appropriate arguments now point to
1907 (print_insn_arg): Changed static array of one-character-string
1908 pointers into a static const array of characters; fixed sprintf
1909 statement accordingly.
1911 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1913 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1914 from distribution. A ns32k-dis.c from a previous distribution has
1915 been brought up to date and supports the new interface.
1917 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1919 * configure.in: add bfd_ns32k_arch target support.
1921 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1922 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1924 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1926 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1929 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1931 * h8300-dis.c, mips-dis.c: Don't use true and false.
1933 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1935 * configure.in: Change --with-targets to --enable-targets.
1937 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1939 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1940 opcodes to the first instruction with that opcode, to speed
1941 disassembly of large files. From ralphc@pyramid.com (Ralph
1944 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1946 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1948 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1950 * configure.bat: update to latest makefile.in
1952 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1954 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1955 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1956 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1957 slot insn is in a delay slot.
1958 * z8k-opc.h: (resflg): Fix patterns.
1959 * h8500-opc.h Fix CR insn patterns.
1961 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1963 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1964 "cmpl" before POWER versions, so that gas -many uses them.
1966 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1968 * disassemble.c: New file.
1969 * Makefile.in (OFILES): Add disassemble.o.
1970 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1971 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1972 binutils/configure.in.
1974 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1975 opcode being examined.
1977 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1979 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1980 (insert_ral, insert_ram, insert_ras): New functions.
1981 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1982 RAS for store with update.
1984 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1986 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1987 (edelsohn@npac.syr.edu).
1989 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1991 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1994 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1996 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1998 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2000 * ppc-opc.c (powerpc_operands): The signedp field has been
2001 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2002 instead. Add new operand SISIGNOPT.
2003 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2004 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2005 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2008 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2010 * i386-dis.c (struct private): Renamed to dis_private. `private'
2011 is a reserved word for dynix cc.
2013 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2015 * configure.in: Change error message to refer to bfd/config.bfd
2016 rather than bfd/configure.in.
2018 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2020 * ppc-opc.c: Define POWER2 as short alias flag.
2021 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2024 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2026 * i960-dis.c (print_insn_i960): Don't read a second word for
2027 opcodes 0, 1, 2 and 3.
2029 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2031 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2033 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2035 * m68881-ext.c: Removed; no longer used.
2036 * Makefile.in: Changed accordingly.
2038 * m68k-dis.c (ext_format_68881): Don't declare.
2039 (print_insn_m68k): If an instruction uses place 'i', it uses at
2040 least four fixed bytes.
2041 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2042 extended float, convert to double using floatformat_to_double, not
2043 ieee_extended_to_double, and fetch the data before converting it.
2045 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2047 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2048 davidj@ICSI.Berkeley.EDU (David Johnson).
2050 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2052 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2053 PowerPC uses bdnz[l][a].
2055 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2057 * dis-buf.c, i386-dis.c: Include sysdep.h.
2059 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2061 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2063 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2064 by Motorola PowerPC 601 with PPC_OPCODE_601.
2065 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2066 Disassemble Motorola PowerPC 601 instructions as well as normal
2067 PowerPC instructions.
2069 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2071 * i960-dis.c (reg, mem): Just use a static array instead of
2074 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2076 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2077 condition name index if this is for a negated condition.
2079 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2080 Floating point format for 'H' operand is backwards from normal
2081 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2082 operands (fmpyadd and fmpysub), handle bizarre register
2083 translation correctly for single precision format.
2085 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2086 or 'I' operands if the next format specifier is 'M' (fcmp
2087 condition completer).
2089 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2091 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2092 single number giving a bitmask for the MB and ME fields of an M
2093 form instruction. Change NB to accept 32, and turn it into 0;
2094 also turn 0 into 32 when disassembling. Seperated SH from NB.
2095 (insert_mbe, extract_mbe): New functions.
2096 (insert_nb, extract_nb): New functions.
2097 (SC_MASK): Mask out SA and LK bits.
2098 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2099 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2100 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2101 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2102 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2103 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2104 (powerpc_macros): Define table of macro definitions.
2105 (powerpc_num_macros): Define.
2107 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2108 if PPC_OPERAND_NEXT is set.
2110 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2112 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2113 char. Retrieve contents using bfd_getl32 instead of shifting.
2115 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2117 * ppc-opc.c: New file. Opcode table for PowerPC, including
2118 opcodes for POWER (RS/6000).
2119 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2120 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2121 (CFILES): Add ppc-dis.c.
2122 (ppc-dis.o, ppc-opc.o): New targets.
2123 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2125 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2127 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2128 No space before 'u', 'f', or 'N'.
2130 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2132 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2133 farther than we should.
2135 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2137 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2139 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2141 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2143 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2144 needs it, to prevent reading past the end of a section.
2146 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2148 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2149 Removed t,A case for la; always use t,A(b) case.
2151 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2153 From Ted Lemen <mellon@pepper.ncd.com>
2154 * mips-dis.c (print_insn_arg): Handle 'k'.
2155 * mips-opc.c: Make cache use k, not t.
2157 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2159 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2160 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2161 FLOAT_FORMAT_CODE to put out floating point register names.
2163 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2165 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2167 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2169 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2171 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2173 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2174 larger than 32. Moved dsxx32 variants first for disassembler.
2176 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2178 * z8kgen.c, z8k-opc.h: Add full lda information.
2180 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2182 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2183 movb instructions. Any necessary space will be emitted by
2184 the code to handle nullification completers.
2186 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2188 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2190 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2192 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2193 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2195 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2197 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2199 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2201 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2202 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2204 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2206 * m88k-dis.c (m88kdis): comment change. Remove space after
2208 (printop): handle new arg types DEC and XREG for m88110.
2210 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2212 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2213 type for absolute branch addresses. Delete special
2214 "ble" and "be" code in 'W' operand code.
2216 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2218 * mips-opc.c: Set hazard information correctly for branch
2219 likely instructions.
2221 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2223 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2224 info->fprintf_func for printing and info->print_address_func for
2227 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2229 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2231 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2233 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2234 Corrected second case of "b" for disassembler.
2236 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2238 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2239 to BFD swapping routines to correspond to BFD name changes.
2241 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2243 * mips-opc.c: Change div machine instruction to be z,s,t rather
2244 than s,t. Change div macro to be d,v,t rather than d,s,t.
2245 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2246 rem and remu which generates only the corresponding div
2247 instruction. This is for compatibility with the MIPS assembler,
2248 which only generates the simple machine instruction when an
2249 explicit destination of $0 is used.
2250 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2252 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2254 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2255 WR_31 hazard for bal, bgezal, bltzal.
2257 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2259 * hppa-dis.c (print_insn_hppa): Use print function
2260 from within the disassemble_info, not fprintf_filtered.
2262 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2264 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2265 Law, law@cs.utah.edu.)
2267 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2269 * mips-opc.c ("absu"): Removed.
2272 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2274 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2275 Changed hazard information to distinguish between memory load
2276 delays and coprocessor load delays.
2278 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2280 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2282 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2284 * configure.in: Don't pass cpu to config.bfd.
2286 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2288 * m88k-dis.c (m88kdis): Make class unsigned.
2290 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2292 * alpha-dis.c (print_insn_alpha): One branch format case was
2293 missing the instruction name.
2295 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2297 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2298 Add the arch-specific auxiliary files.
2299 (OFILES): Remove the arch-specific auxiliary files
2300 and use BFD_MACHINES instead of DIS_LIBS.
2301 * configure.in: Set BFD_MACHINES based on --with-targets option.
2303 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2305 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2308 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2310 * sparc-opc.c: Change CONST to const to deal with gcc
2311 -Dconst=__const -traditional.
2313 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2315 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2316 coprocessor instructions out of #if 0, and made them use new
2319 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2321 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2323 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2325 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2326 instruction, for use by the disassembler.
2328 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2329 hand-coded sign extensions that depended on 32-bit host ints.
2330 FIXME, we still depend on big-endian host bitfield ordering.
2331 (sparc_print_insn): Set the insn_info_valid field, and the
2332 other fields that describe the instruction being printed.
2334 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2336 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2337 `jmp' instead of just one of them.
2339 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2341 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2342 (fput_fp_reg_r): Renamed from fput_reg_r.
2343 (fput_fp_reg): New function.
2344 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2346 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2348 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2350 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2352 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2354 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2355 don't output a space.
2357 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2359 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2361 * mips-opc.c: New file, containing opcode table from
2362 ../include/opcode/mips.h.
2363 * Makefile.in: Add it.
2365 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2367 * m88k-dis.c: New file, moved in from gdb and changed to use the
2368 new dis-asm.h disassembler interface.
2369 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2370 (m88k-dis.o): New target.
2372 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2374 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2375 argument string const char * to correspond to opcode/mips.h.
2377 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2379 * mips-dis.c: Updated to account for name changes in new version
2381 * Makefile.in: Added header file dependencies.
2383 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2385 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2387 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2389 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2390 extend, rather than shifts.
2392 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2394 * Makefile.in: Undo 15 June change.
2396 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2398 * m68k-dis.c (print_insn_arg): Change return value to byte count
2400 * m68k-dis.c: Re-write to detect invalid operands before
2401 printing anything, so we can handle this the same way we
2402 handle invalid opcodes.
2404 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2406 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2408 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2410 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2413 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2415 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2417 * configure.in: Do make sysdep.h link.
2418 * Makefile.in: Search ../include. Don't search ../bfd.
2420 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2422 Changes from Jeff Law, law@cs.utah.edu:
2423 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2424 Do not print a space before the completers specified by
2427 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2429 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2430 defined, since gdb has been fixed.
2432 Changes from Jeff Law, law@cs.utah.edu:
2433 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2434 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2435 be a *disassemble_info, not a *FILE.
2436 * hppa-dis.c: Support 'd', '!', and 'a'.
2437 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2438 * hppa-dis.c: Delete cases which are no longer needed.
2440 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2442 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2444 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2446 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2449 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2451 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2452 * configure.in: No longer need to configure to get sysdep.h.
2454 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2456 * Patches from Jeffrey Law <law@cs.utah.edu>.
2457 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2458 templates for 1.1 FP computational instructions.
2460 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2462 * h8500-dis.c (print_insn_h8500): Address argument is type
2464 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2467 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2468 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2470 * sparc-dis.c (compare_opcodes): Move static declaration to
2473 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2475 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2476 instruction, remove unimp hack from 'l' argument.
2478 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2480 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2483 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2485 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2486 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2489 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2491 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2492 arrays of string pointers to 2-d arrays of chars, to save
2495 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2497 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2498 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2500 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2502 * hppa-dis.c: New file from Utah, adapted to new disassembler
2504 * Makefile.in: Include it.
2506 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2508 * sh-dis.c, sh-opc.h: New files.
2510 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2512 * alpha-dis.c, alpha-opc.h: New files.
2514 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2516 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2519 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2521 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2523 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2525 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2528 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2530 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2531 and double percent signs a few places.
2533 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2535 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2536 Use info->print_address_func not print_address.
2538 * dis-buf.c (generic_print_address): New function.
2540 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2542 * Makefile.in: Add sparc-dis.c.
2543 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2545 Add `add' instruction to the set that get checked
2546 for a preceding `sethi' in order to print an absolute address.
2547 * (print_insn): Disassembly prefers real instructions.
2548 (is_delayed_branch): Speed up.
2549 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2550 Still missing some float ops, and needs testing.
2551 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2552 F_ALIAS. Use printf, not fprintf, when not passing a file
2554 (compare_opcodes): Check that identical instructions have
2555 identical opcodes, complain otherwise.
2558 * Include reg_names.
2560 Use dis-asm.h/read_memory_func interface.
2562 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2564 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2565 deliberately return non-zero to setjmp from longjmp. Otherwise
2566 this code fails to compile.
2568 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2570 * m68k-dis.c: Fix prototype for fetch_arg().
2572 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2574 * dis-buf.c: New file, for new read_memory_func interface.
2575 Makefile.in (OFILES): Include it.
2576 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2577 Use new read_memory_func interface.
2579 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2581 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2582 * h8500-opc.h: Fix couple of opcodes.
2584 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2586 * Makefile.in: add dvi & installcheck targets
2588 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2590 * Makefile.in: Update for h8500-dis.c.
2592 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2594 * h8500-dis.c, h8500-opc.h: New files
2596 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2598 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2599 ../include/dis-asm.h.
2600 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2601 and ../gdb/m68k-pinsn.c).
2602 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2603 and ../gdb/i386-pinsn.c).
2604 * m68881-ext.c: New file. Moved definition of
2605 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2606 * Makefile.in: Adjust for new files.
2607 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2608 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2609 can be dis-assembled.
2611 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2613 * mips-dis.c (print_insn_arg): Now returns void.
2615 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2617 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2618 files that use the macros.
2620 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2622 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2623 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2624 (CFILES): Added mips-dis.c.
2626 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2628 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2629 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2631 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2633 * Makefile.in: Improve *clean rules.
2634 * configure.in: Allow a default host.
2636 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2638 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2639 files include other sysdep files
2641 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2643 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2645 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2647 * configure.in: For host support, use ../bfd/configure.host
2648 so it stays in sync with the ../bfd/hosts database.
2650 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2652 * configure.in: use cpu-vendor-os triple instead of nested cases
2654 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2656 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2657 *always* the wrong one.
2659 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2661 * z8kgen.c: added copyright info
2663 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2665 * z8k-dis.c (unparse_instr): prettier tabs
2666 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2668 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2670 * configure.in: Add ncr* configuration.
2671 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2672 picayune ANSI compilers happy.
2674 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2676 * configure.in (i386): Make i386 and i486 synonymous for now.
2677 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2679 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2681 * Makefile.in (install): Fix typo.
2683 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2685 * Makefile.in (make): Remove obsolete crud.
2686 (sparc-opc.o): Avoid Sun Make VPATH bug.
2688 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2690 * Makefile.in: since there are no SUBDIRS, remove rule and
2691 references of subdir_do.
2693 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2695 * Makefile.in (install): Get the library name right here too.
2696 Don't install bfd.h, since it's unrelated to this library. No
2697 subdirs to recurse into, either.
2698 (CFILES): The source file has a .c suffix, not .o.
2700 * sparc-opc.c: New file, moved from BFD.
2701 * Makefile.in (OFILES): Build it.
2703 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2705 * z8k-dis.c: fixed forward refferences of some declarations.
2707 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2709 * Makefile.in: get the name of the library right
2711 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2713 * z8k-dis.c: knows how to disassemble z8k stuff
2714 * z8k-opc.h: new file full of z8000 opcodes
2718 version-control: never