opcodes/ChangeLog

   1 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
   4         and vex_w_done.
   5
   6 2009-10-07  Michael Eager  <eager@eagercon.com>
   7
   8         * microblaze-dis.c: Add include for microblaze-dis.h,
   9         eliminate local extern decls.
  10         * microblaze-dis.h: New.
  11
  12 2009-10-06  Nick Clifton  <nickc@redhat.com>
  13
  14         * po/fi.po: Updated Finnish translation.
  15
  16 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
  17
  18         * opc2c.c: Include "libiberty.h" and <errno.h>.
  19         (orig_filename): Constify.
  20         (dump_lines): Fix line number directive.
  21         (main): Set orig_filename to basename of input file.  Use
  22         xstrerror.
  23
  24         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
  25         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
  26         instead of $(EXEEXT).
  27         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
  28         $(LINK_FOR_BUILD).  Link with libiberty.
  29         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
  30         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
  31         * Makefile.in: Regenerated.
  32         * rx-decode.c: Regenerated.
  33
  34 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
  35
  36         * arm-dis.c (print_insn): Check symtab_size not *symtab.
  37
  38 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
  39
  40         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
  41         * i386-tbl.h: Regenerated.
  42
  43 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
  44
  45         * ppc-dis.c (ppc_opts): Add "476" entry.
  46         * ppc-opc.c (PPC476): Define.
  47         (powerpc_opcodes): Update mnemonics where required for 476.
  48
  49 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
  50
  51         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
  52         * ppc-dis.c (ppc_opts): Likewise.
  53         Rename "ppca2" to "a2".
  54
  55 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
  56
  57         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
  58
  59 2009-09-29  DJ Delorie  <dj@redhat.com>
  60
  61         * Makefile.am: Add RX files.
  62         * configure.in: Add support for RX target.
  63         * disassemble.c: Likewise.
  64         * Makefile.in: Regenerate.
  65         * configure: Regenerate.
  66         * opc2c.c: New file.
  67         * rx-decode.c: New file.
  68         * rx-decode.opc: New file.
  69         * rx-dis.c: New file.
  70
  71 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
  72
  73         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
  74         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
  75
  76 2009-09-25  Michael Eager  <eager@eagercon.com>
  77
  78         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
  79         microblaze_decode_insn): Add declarations.
  80         (get_delay_slots_microblaze): Remove.
  81
  82 2009-09-25  Martin Thuresson  <martint@google.com>
  83
  84         Update sources to make arc and arm targets compile cleanly with
  85         -Wc++-compat:
  86         * arc-dis.c Fix casts.
  87         * arc-ext.c: Add casts.
  88         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
  89         enum.
  90
  91 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
  92
  93         * i386-gen.c (opcode_modifiers): Remove Vex256.
  94         (set_bitfield): Handle XXX=V.
  95
  96         * i386-opc.h (Vex): Update comments.
  97         (Vex256): Removed.
  98         (VexNDS): Updated.
  99         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 100
 101         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 102         * i386-tbl.h: Regenerated.
 103
 104 2009-09-23  Nick Clifton  <nickc@redhat.com>
 105
 106         * po/fr.po: Updated French translation.
 107
 108 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 109             Peter Bergner  <bergner@vnet.ibm.com>
 110
 111         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 112         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 113         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 114         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 115         ici mnemonics.
 116         (ERAT_T): New operand.
 117         (XWC_MASK): New mask.
 118         (XOPL2): New macro.
 119         (PPCA2): Define.
 120
 121 2009-09-18  Nick Clifton  <nickc@redhat.com>
 122
 123         * po/es.po: Updated Spanish translation.
 124         * po/vi.po: Updated Vietnamese translation.
 125
 126 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 127
 128         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 129         disp == -disp.
 130
 131 2009-09-14  Nick Clifton  <nickc@redhat.com>
 132
 133         * po/nl.po: Updated Dutch translation.
 134
 135 2009-09-11  Nick Clifton  <nickc@redhat.com>
 136
 137         * po/opcodes.pot: Updated by the Translation project.
 138
 139 2009-09-11  Martin Thuresson  <martint@google.com>
 140
 141         Updated sources to compile cleanly with -Wc++-compat:
 142         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 143         * ldcref.c: Add casts.
 144         * ldctor.c: Add casts.
 145         * ldexp.c
 146         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 147         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 148         * ldlang.h (enum statement_enum): Move to top level.
 149         * ldmain.c: Add casts.
 150         * ldwrite.c: Add casts.
 151         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 152         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 153
 154 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 155
 156         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 157
 158 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 159
 160         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 161         (print_insn_s390): Signextend and shift pcrel operands before printing.
 162
 163 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 164
 165         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 166         VEX_LEN_AE_R_X_M_0 in comments.
 167
 168 2009-09-08  DJ Delorie  <dj@redhat.com>
 169
 170         * mep-opc.c: Regenerate.
 171
 172 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 173
 174         * z8kgen.c (struct op): Replace unused flavor with id.
 175         (opt): Remove extra xorb entry.
 176         (func): Use id field as fallback.
 177         (sub): Return new string, caller changed.
 178         (internal): Allocate end marker.  Assign unique id before sorting.
 179         (gas): Likewise.  Fix loop end condition.
 180         * z8k-opc.h: Regenerate.
 181
 182 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 183
 184         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 185
 186 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 187
 188         * z8kgen.c (func): Fix thinko last patch.
 189
 190 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 191
 192         * z8kgen.c (func): Stabilize qsort of identically named entries.
 193         * z8k-opc.h: Regenerate.
 194
 195 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 196
 197         * po/opcodes.pot: Regenerate.
 198
 199 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 200
 201         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 202         * configure: Regenerate.
 203         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 204         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 205         (i386-gen, ia64-gen, z8kgen): ..here.
 206         * Makefile.in: Regenerate.
 207
 208 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 209
 210         * z8k-opc.h: Regenerate.
 211
 212 2009-09-05  Martin Thuresson  <martin@mtme.org>
 213
 214         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 215         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 216         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 217         Rename argument class to symbol_class.
 218
 219 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 220
 221         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 222         to the new encoding of DBGA, DBGAH, and DBGAL.
 223         (_print_insn_bfin): Likewise.
 224
 225 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 226
 227         * bfin-dis.c (_print_insn_bfin): Don't declare.
 228         (print_insn_bfin): Don't declare.
 229         (dregs_pair): Remove.
 230         (ignore_bits): Remove.
 231         (ccstat): Remove.
 232
 233 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 234
 235         * bfin-dis.c (IS_DREG): Define.
 236         (IS_PREG): Define.
 237         (IS_AREG): Define.
 238         (IS_GENREG): Define.
 239         (IS_DAGREG): Define.
 240         (IS_SYSREG): Define.
 241         (decode_REGMV_0): Check illegal register move instructions.
 242
 243 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 244
 245         * Makefile.am (BUILD_LIBINTL): New variable.
 246         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 247         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 248         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 249         * Makefile.in: Regenerate.
 250
 251 2009-09-01  DJ Delorie  <dj@redhat.com>
 252
 253         * mep-asm.c: Regenerate.
 254         * mep-desc.c: Regenerate.
 255         * mep-opc.c: Regenerate.
 256
 257 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 258
 259         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 260         dependencies.  Remove unused FORMAT variable.
 261         * configure.com: New file to create build.com DCL script for
 262         Itanium VMS or Alpha VMS.
 263
 264 2009-08-29  Martin Thuresson  <martin@mtme.org>
 265
 266         * cris-dis.c (bytes_to_skip): Update code to use new name.
 267         * i386-dis.c (putop): Update code to use new name.
 268         * i386-gen.c (process_i386_opcodes): Update code to use
 269         new name.
 270         * i386-opc.h (struct template): Rename struct template to
 271         insn_template. Update code accordingly.
 272         * i386-tbl.h (i386_optab): Update type to use new name.
 273         * ia64-dis.c (print_insn_ia64): Rename variable template
 274         to template_val.
 275         * tic30-dis.c (struct instruction, get_tic30_instruction):
 276         Update code to use new name.
 277         * tic54x-dis.c (has_lkaddr, get_insn_size)
 278         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 279         Update code to use new name.
 280         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 281         Update type to new name.
 282         * z8kgen.c (internal, gas): Rename variable new to new_op.
 283
 284 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 285
 286         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 287         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 288         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 289         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 290         * Makefile.in: Regenerated.
 291
 292 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 293
 294         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 295         [INSTALL_LIBBFD]: ... here, ...
 296         [INSTALL_LIBBFD]: ... and empty overrides here.
 297         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 298         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 299         * Makefile.in: Regenerate.
 300         * configure: Regenerate.
 301
 302 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 303
 304         * m68k-dis.c (print_insn_arg): Add movecr register names for
 305         coldfire v4e families.
 306
 307 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 308
 309         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 310         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 311         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 312         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 313         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 314         (i386-gen.o): New rule.
 315         ($(srcdir)/i386-init.h): Adjust.
 316         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 317         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 318         (ia64-gen.o): New rule.
 319         (ia64_asmtab_deps): New variable.
 320         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 321         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 322         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 323         likewise.
 324         (s390-opc.tab): Adjust.
 325         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 326         rules.
 327         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 328         * Makefile.in: Regenerate.
 329         * z8kgen.c (gas): Avoid '/*' in comment.
 330         * z8k-opc.h (func): Regenerate.
 331
 332 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 333
 334         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 335         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 336         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 337         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 338         msp430-dis.c added.
 339         (LIBOPCODES_CFILES): New variable, adding to
 340         TARGET_LIBOPCODES_CFILES also non-target library sources.
 341         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 342         files.
 343         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 344         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 345         * Makefile.in: Regenerate.
 346         * po/POTFILES.in: Regenerate.
 347
 348 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 349
 350         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 351         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 352         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 353         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 354         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 355         is built shared even if it is not to be installed.
 356         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 357         (install_libopcodes, uninstall_libopcodes): Remove.
 358         (AM_CPPFLAGS): Renamed from ...
 359         (INCLUDES): ... this.
 360         * Makefile.in: Regenerate.
 361
 362         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 363         1.11, foreign, no-dist.
 364         (MKDEP, m32c_opc_h): Remove variables.
 365         (disassemble.lo): Rewrite using automake-style dependency
 366         tracking rules; only list the dependency upon the primary source
 367         file, but no included headers.
 368         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 369         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 370         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 371         ensure all dependency fragments are included in the Makefile.
 372         (s390-opc.lo): Depend on s390-opc.tab.
 373         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 374         (mkdep section): Remove.
 375         * Makefile.in: Regenerate.
 376         * po/POTFILES.in: Regenerate.
 377
 378         * Makefile.am (install-pdf, install-html): Remove.
 379         * Makefile.in: Regenerate.
 380
 381         * Makefile.in: Regenerate.
 382         * aclocal.m4: Likewise.
 383         * config.in: Likewise.
 384         * configure: Likewise.
 385
 386 2009-08-06  Michael Eager <eager@eagercon.com>
 387
 388         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 389         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 390         * Makefile.in: Regenerate.
 391         * configure.in: Add bfd_microblaze_arch target.
 392         * configure: Regenerate.
 393         * disassemble.c: Define ARCH_microblaze, return
 394         print_insn_microblaze().
 395         * microblaze-dis.c: New MicroBlaze disassembler.
 396         * microblaze-opc.h: New MicroBlaze opcode definitions.
 397         * microblaze-opcm.h: New MicroBlaze opcode types.
 398
 399 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 400
 401         * configure.in: Handle bfd_l1om_arch.
 402         * disassemble.c (disassembler): Likewise.
 403
 404         * configure: Regenerated.
 405
 406         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 407         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 408
 409         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 410         Add CPU_L1OM_FLAGS.
 411         (cpu_flags): Add CpuL1OM.
 412         (set_bitfield): Take an argument to set the value field.
 413         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 414         (process_i386_opcode_modifier): Updated.
 415         (process_i386_operand_type): Likewise.
 416         * i386-init.h: Regenerated.
 417         * i386-tbl.h: Likewise.
 418
 419         * i386-opc.h (CpuL1OM): New.
 420         (CpuXsave): Updated.
 421         (i386_cpu_flags): Add cpul1om.
 422
 423 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 424
 425         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 426         frstpm.
 427         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 428         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 429         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 430         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 431         Define.
 432         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 433         and cpufisttp.
 434         * i386-opc.tbl: Qualify floating point instructions by their
 435         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 436         and fsincos to be avilable only on 387. Fix fstsw ax to be
 437         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 438         and frstpm.
 439         * i386-init.h, i386-tbl.h: Regenerate.
 440
 441 2009-07-20  Nick Clifton  <nickc@redhat.com>
 442
 443         PR 10288
 444         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 445         offset or indexed based addressing mode 3.
 446
 447 2009-07-14  Nick Clifton  <nickc@redhat.com>
 448
 449         PR 10288
 450         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 451         patterns.
 452         (arm_decode_shift): Catch illegal register based shifts.
 453         (print_insn_arm): Properly handle negative register r0
 454         post-indexed addressing.
 455
 456 2009-07-10  Doug Kwan  <dougkwan@google.com>
 457
 458         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 459         lower 32 bits of long types to make hexadecimal output consistent
 460         on both 32-bit and 64-bit hosts.
 461
 462 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 463
 464         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 465         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 466         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 467         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 468         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 469         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 470         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 471         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 472         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 473         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 474         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 475         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 476
 477 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 478
 479         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 480
 481 2009-07-07  Nick Clifton  <nickc@redhat.com>
 482
 483         PR 10288
 484         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 485         addressing modes.
 486
 487 2009-07-06  DJ Delorie  <dj@redhat.com>
 488
 489         * mep-desc.c: Regenerate.
 490         * mep-desc.h: Regenerate.
 491         * mep-opc.c: Regenerate.
 492         * mep-opc.h: Regenerate.
 493
 494 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 495
 496         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 497         (i386_cpu_flags): New.
 498         * i386-gen.c: Add CPU_FMA4_FLAGS.
 499         * i386-opc.tbl: Add FMA4 instructions.
 500         * i386-tbl.h: Regenerate.
 501         * i386-init.h: Regenerate.
 502         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 503         (OP_XMM_VexW): Ditto.
 504         (OP_EX_VexW): Ditto.
 505         (VEXI4_Fixup): Ditto.
 506         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 507         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 508         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 509         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 510         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 511         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 512         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 513         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 514         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 515         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 516         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 517         (get_vex_imm8): New. handle FMA4.
 518         (OP_EX_VexReg): Ditto.
 519
 520 2009-06-30  Nick Clifton  <nickc@redhat.com>
 521
 522         PR 10288
 523         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 524         LFM and SFM instructions as comments,.
 525         Improve consistency of formatting for instructions displayed as
 526         comments and decimal values displayed with their hexadecimal
 527         equivalents.
 528         Formatting tidy ups.
 529
 530 2009-06-29  Nick Clifton  <nickc@redhat.com>
 531
 532         PR 10288
 533         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 534         boundary between variaant and generic coprocessor instuctions.
 535         (coprocessor): Use it.
 536         Fix architecture version of MCRR and MRRC instructions.
 537         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 538         (print_insn_coprocessor): Check architecture and extension masks.
 539         Print a hexadecimal version of any decimal constant that is
 540         outside of the range of -16 to +32.
 541         (print_arm_address): Add a return value of the offset used in the
 542         adress, if it is worth printing a hexadecimal version of it.
 543         (print_insn_neon): Print a hexadecimal version of any decimal
 544         constant that is outside of the range of -16 to +32.
 545         (print_insn_arm): Likewise.
 546         (print_insn_thumb16): Likewise.
 547         (print_insn_thumb32): Likewise.
 548
 549         PR 10297
 550         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 551         of an undefined instruction.
 552         (arm_opcodes): Use it.
 553         (thumb_opcod): Use it.
 554         (thumb32_opc): Use it.
 555
 556 2009-06-23  DJ Delorie  <dj@redhat.com>
 557
 558         * mep-desc.c: Regenerate.
 559         * mep-desc.h: Regenerate.
 560         * mep-dis.c: Regenerate.
 561         * mep-ibld.c: Regenerate.
 562         * mep-opc.c: Regenerate.
 563
 564         * mep-asm.c: Regenerate.
 565         * mep-opc.c: Regenerate.
 566         * mep-opc.h: Regenerate.
 567
 568 2009-06-22  Nick Clifton  <nickc@redhat.com>
 569
 570         * po/fi.po: Updated Finish translation.
 571
 572 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 573
 574         * m32c-asm.c: Regenerate.
 575
 576 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 577
 578         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 579         case label to proper lexical block.
 580         * score7-dis.c (print_insn_score32): Likewise.
 581
 582 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 583
 584         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 585         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 586         * s390-opc.txt (nopr, nop): Use new instruction format.
 587
 588 2009-06-18  Nick Clifton  <nickc@redhat.com>
 589
 590         PR 10288
 591         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 592         ARM architecture supports the matched instruction.
 593         (print_insn_arm): Likewise.
 594         (select_arm_features): New function.  Fills in the fields of an
 595         arm_feature_set structure based on a given arm machine number.
 596         (print_insn): Initialise an arm_feature_set structure.
 597
 598 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 599
 600         * vax-dis.c (is_function_entry): Return success for synthetic
 601         symbols too.
 602         (is_plt_tail): New function.
 603         (print_insn_vax): Decode PLT entry offset longword.
 604
 605 2009-06-15  Nick Clifton  <nickc@redhat.com>
 606
 607         PR 10186
 608         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 609         instruction.
 610
 611         PR 10173
 612         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 613
 614 2009-06-15  Nick Clifton  <nickc@redhat.com>
 615
 616         PR 10263
 617         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 618         the disassembly of data as well as instructions.
 619
 620 2009-06-11  Doug Evans  <dje@sebabeach.org>
 621
 622         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 623
 624 2009-06-11  Anthony Green  <green@moxielogic.com>
 625
 626         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 627         (moxie_form3_opc_info): Add branch instructions.
 628         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 629         encoded instructions.
 630
 631 2009-06-06  Anthony Green  <green@moxielogic.com>
 632
 633         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 634         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 635
 636 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 637
 638         * dep-in.sed: Don't use \n in replacement part of s command.
 639         * Makefile.am (DEP1): LC_ALL for uniq.
 640         * Makefile.in: Regenerate.
 641
 642 2009-06-02  Nick Clifton  <nickc@redhat.com>
 643
 644         * po/nl.po: Updated Dutch translation.
 645
 646 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 647
 648         * ia64-gen.c (parse_resource_users, print_dependency_table,
 649         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 650         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 651         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 652         insert_completer_entry, print_completer_entry, print_completer_table,
 653         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 654
 655 2009-05-28  DJ Delorie  <dj@redhat.com>
 656
 657         * mep-asm.c: Regenerate.
 658         * mep-desc.c: Regenerate.
 659
 660 2009-05-26  DJ Delorie  <dj@redhat.com>
 661
 662         * mep-asm.c: Regenerate.
 663         * mep-desc.c: Regenerate.
 664         * mep-desc.h: Regenerate.
 665         * mep-dis.c: Regenerate.
 666         * mep-ibld.c: Regenerate.
 667         * mep-opc.c: Regenerate.
 668         * mep-opc.h: Regenerate.
 669
 670 2009-05-26  Nick Clifton  <nickc@redhat.com>
 671
 672         * po/id.po: Updated Indonesian translation.
 673         * po/opcodes.pot: Updated template file.
 674
 675 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 676
 677         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 678         per line with all lines having continuation backslash.  Prefix
 679         first line with "A", following lines with "B".
 680         * Makefile.am (DEP): Don't use dep.sed here.
 681         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 682         dep.sed here on dependencies, sort and uniq.
 683         * Makefile.in: Regenerate.
 684
 685 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 686
 687         * makefile.vms (OPT): New variable.
 688         (CFLAGS): Update compilation flags.
 689
 690 2009-05-22  DJ Delorie  <dj@redhat.com>
 691
 692         * mep-asm.c: Regenerate.
 693         * mep-desc.c: Regenerate.
 694         * mep-desc.h: Regenerate.
 695         * mep-dis.c: Regenerate.
 696         * mep-ibld.c: Regenerate.
 697         * mep-opc.c: Regenerate.
 698         * mep-opc.h: Regenerate.
 699
 700 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 701
 702         * i386-opc.h (Cpusse5): Delete.
 703         (i386_cpu_flags): Delete.
 704         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 705         * i386-opc.tbl: Remove SSE5 instructions.
 706         * i386-tbl.h: Regenerate.
 707         * i386-init.h: Regenerate.
 708         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 709         (print_drex_arg): Delete.
 710         (OP_DREX4): Delete.
 711         (OP_DREX3): Delete.
 712         (OP_DREX_ICMP): Delete.
 713         (OP_DREX_FCMP): Delete.
 714         (DREX_*): Delete.
 715         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 716
 717 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 718
 719         * Makefile.am: Run "make dep-am".
 720         * Makefile.in: Regenerate.
 721         * po/POTFILES.in: Regenerate.
 722
 723 2009-05-19  DJ Delorie  <dj@redhat.com>
 724
 725         * mep-asm.c: Regenerate.
 726         * mep-opc.c: Regenerate.
 727
 728 2009-04-30  DJ Delorie  <dj@redhat.com>
 729
 730         * mep-asm.c: Regenerate.
 731         * mep-desc.c: Regenerate.
 732         * mep-desc.h: Regenerate.
 733         * mep-dis.c: Regenerate.
 734         * mep-ibld.c: Regenerate.
 735         * mep-opc.c: Regenerate.
 736         * mep-opc.h: Regenerate.
 737
 738 2009-04-17  DJ Delorie  <dj@redhat.com
 739
 740         * mep-desc.c: Regenerate.
 741         * mep-ibld.c: Regenerate.
 742         * mep-opc.c: Regenerate.
 743         * mep-opc.h: Regenerate.
 744
 745 2009-04-15  Anthony Green  <green@moxielogic.com>
 746
 747         * moxie-opc.c, moxie-dis.c: Created.
 748         * Makefile.am: Build the moxie source files.
 749         * configure.in: Add moxie support.
 750         * Makefile.in, configure: Rebuilt.
 751         * disassemble.c (disassembler): Add moxie support.
 752         (ARCH_moxie): Define.
 753
 754 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 755
 756         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 757         extension to None.
 758         (pshab, pshaw, pshad, pshaq): Likewise.
 759         * i386-tbl.h: Re-generate.
 760
 761 2009-04-08  DJ Delorie  <dj@redhat.com
 762
 763         * mep-asm.c: Regenerate.
 764         * mep-desc.c: Regenerate.
 765         * mep-desc.h: Regenerate.
 766         * mep-dis.c: Regenerate.
 767         * mep-ibld.c: Regenerate.
 768         * mep-opc.c: Regenerate.
 769         * mep-opc.h: Regenerate.
 770
 771 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 772
 773         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 774         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 775         Reorder entries so the extended mnemonics are listed before tlbilx.
 776
 777 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 778
 779         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 780         due to -many/-Many.
 781         (print_insn_powerpc): Make sure we only deprecate instructions using
 782         the original dialect and not a modified dialect due to -Many handling.
 783         Move the handling of the condition register and default operands to
 784         the end of the if/else if/else chain.
 785         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 786         instructions from newer processors are listed before older ones.
 787         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 788         that have instructions with conflicting opcodes.
 789
 790 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 791
 792         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 793         E500MC entries.
 794
 795 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 796
 797         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 798
 799 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 800
 801         * arm-dis.c (print_insn): Also check section matches in backwards
 802         search for mapping symbol.
 803
 804 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
 805
 806         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
 807
 808 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
 809
 810         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
 811         * Makefile.am: Run "make dep-am".
 812         * Makefile.in: Regenerate.
 813         * openrisc-opc.c: Regenerate.
 814
 815 2009-03-10  Nick Clifton  <nickc@redhat.com>
 816
 817         * po/id.po: Updated Indonesian translation.
 818
 819 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
 820
 821         * ppc-dis.c: Include "opintl.h".
 822         (struct ppc_mopt, ppc_opts): New.
 823         (ppc_parse_cpu): New function.
 824         (powerpc_init_dialect): Use it.
 825         (print_ppc_disassembler_options): Dump options from ppc_opts.
 826         Internationalize message.
 827
 828 2009-03-06  Nick Clifton  <nickc@redhat.com>
 829
 830         * po/es.po: Updated Spanish translation.
 831
 832 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
 833
 834         PR 6768
 835         * configure.in: Test for ld --as-needed support.  Link shared
 836         libopcodes against libm.
 837         * configure: Regenerate.
 838
 839 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
 840
 841         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 842         instructions from newer processors are listed before older ones.
 843
 844 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
 845
 846         * Makefile.am: Run "make dep-am".
 847         (HFILES): Move lm32-desc.h and lm32-opc.h from..
 848         (CFILES): ..here.
 849         * Makefile.in: Regenerate.
 850
 851 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
 852
 853         * score7-dis.c: New file.
 854         * Makefile.am: Add dependencies for score7-dis.c.
 855         * Makefile.in: Regenerate.
 856         * configure.in: Add score7-dis to score files.
 857         * configure: Regenerate.
 858         * score-dis.c: Add support for score7 architecture.
 859         * score-opc.h: Likewise.
 860
 861 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 862
 863         * configure: Regenerate.
 864
 865 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
 866
 867         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
 868
 869 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
 870
 871         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
 872         the power7 and the isel instructions.
 873         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
 874         (insert_dm, extract_dm): Likewise.
 875         (XB6): Update comment to include XX2 form.
 876         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
 877         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
 878         (RemoveXX3DM): Delete.
 879         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
 880         "mftgpr">: Deprecate for POWER7.
 881         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
 882         "frsqrte.">: Deprecate the three operand form and enable the two
 883         operand form for POWER7 and later.
 884         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
 885         <"waitsrv", "waitimpl">: Add extended opcodes.
 886         <"ldbrx", "stdbrx">: Enable for POWER7.
 887         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
 888         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
 889         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
 890         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
 891         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
 892         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
 893         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
 894         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
 895         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
 896         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
 897         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
 898         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
 899         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
 900         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
 901         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
 902         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
 903         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
 904         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
 905         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
 906         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
 907         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
 908         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
 909         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
 910         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
 911         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
 912         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
 913         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
 914         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
 915         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
 916         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
 917         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
 918         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
 919         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
 920         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
 921         "xxspltw", "xxswapd">: Add VSX opcodes.
 922
 923 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
 924
 925         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
 926         (operand_types): Remove Vex_Imm4.
 927
 928         * i386-opc.h (Vex_Imm4): Removed.
 929         (OTMax): Updated.
 930         (i386_operand_type): Remove vex_imm4.
 931
 932         * i386-opc.tbl: Remove Vex_Imm4 comments.
 933         * i386-init.h: Regenerated.
 934         * i386-tbl.h: Likewise.
 935
 936 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
 937
 938         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
 939         vq{r}shr{u}n.s64 insnstructions.
 940
 941 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
 942
 943         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
 944         operand to be a float point register (FRT/FRS).
 945
 946 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
 947
 948         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
 949         dmfc2 and dmtc2 before the architecture-level variants.
 950
 951 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
 952
 953         * fr30-opc.c: Regenerate.
 954         * frv-opc.c: Regenerate.
 955         * ip2k-opc.c: Regenerate.
 956         * iq2000-opc.c: Regenerate.
 957         * lm32-opc.c: Regenerate.
 958         * m32c-opc.c: Regenerate.
 959         * m32r-opc.c: Regenerate.
 960         * mep-opc.c: Regenerate.
 961         * mt-opc.c: Regenerate.
 962         * xc16x-opc.c: Regenerate.
 963         * xstormy16-opc.c: Regenerate.
 964         * tic54x-dis.c (print_instruction): Avoid compiler warning on
 965         sprintf call.
 966
 967 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
 968
 969         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
 970
 971 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
 972
 973         * ppc-opc.c: Update copyright year.
 974         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
 975         ordering for POWER4 and later and use the correct Server ordering.
 976
 977 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 978
 979         AVX Programming Reference (January, 2009)
 980         * i386-dis.c (PREFIX_VEX_3A44): New.
 981         (VEX_LEN_3A44_P_2): Likewise.
 982         (PREFIX_VEX_3A48): Updated.
 983         (VEX_LEN_3A4C_P_2): Likewise.
 984         (prefix_table): Add PREFIX_VEX_3A44.
 985         (vex_table): Likewise.
 986         (vex_len_table): Add VEX_LEN_3A44_P_2.
 987
 988         * i386-opc.tbl: Add PCLMUL + AVX instructions.
 989         * i386-tbl.h: Regenerated.
 990
 991 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
 992
 993         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
 994         (mips_arch_choices): Add XLR entry.
 995         * mips-opc.c (XLR): Define.
 996         (mips_builtin_opcodes): Add XLR instructions.
 997
 998 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
 999
1000         * Makefile.am: Add install-pdf target.
1001         * po/Make-in: Add install-pdf target.
1002         * Makefile.in: Regenerate.
1003
1004 2009-02-02  DJ Delorie  <dj@redhat.com>
1005
1006         * mep-asm.c: Regenerate.
1007         * mep-desc.c: Regenerate.
1008         * mep-desc.h: Regenerate.
1009         * mep-dis.c: Regenerate.
1010         * mep-ibld.c: Regenerate.
1011         * mep-opc.c: Regenerate.
1012         * mep-opc.h: Regenerate.
1013
1014 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1015
1016         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1017         qsub, and qdsub.
1018
1019 2009-01-28  Chao-ying Fu  <fu@mips.com>
1020
1021         * mips-opc.c (suxc1): Add the flag of FP_D.
1022
1023 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1024
1025         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1026         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1027         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1028         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1029         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1030         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1031         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1032         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1033
1034 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1035
1036         * configure.in (commonbfdlib): Delete.
1037         (SHARED_LIBADD): Add pic libiberty if such is available.
1038         * configure: Regenerate.
1039         * po/POTFILES.in: Regenerate.
1040
1041 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1042
1043         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1044         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1045         operand form and enable the four operand form for POWER6 and later.
1046         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1047         three operand form for POWER6 and later.
1048
1049 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1050
1051         * bfin-dis.c (OUTS): Use "%s" as format string.
1052
1053 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1054
1055         * i386-gen.c (cpu_flag_init): Remove a white space.
1056         (operand_type_init): Likewise.
1057
1058 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1059
1060         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1061         * i386-tbl.h: Regenerated.
1062
1063 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1064
1065         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1066         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1067         subS, xorS and cmpS.
1068
1069 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1070
1071         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1072         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1073         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1074         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1075         and CpuSYSCALL.
1076         (lineno): Removed.
1077         (set_bitfield): Take an argument, lineno.  Don't report lineno
1078         on error if it is -1.
1079         (process_i386_cpu_flag): Take an argument, lineno.
1080         (process_i386_opcode_modifier): Likewise.
1081         (process_i386_operand_type): Likewise.
1082         (output_i386_opcode): Likewise.
1083         (opcode_hash_entry): Add lineno.
1084         (process_i386_opcodes): Updated.
1085         (process_i386_registers): Likewise.
1086         (process_i386_initializers): Likewise.
1087
1088         * i386-opc.h (CpuP4): Removed.
1089         (CpuK6): Likewise.
1090         (CpuK8): Likewise.
1091         (CpuClflush): New.
1092         (CpuSYSCALL): Likewise.
1093         (CpuMMX): Updated.
1094         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1095         cpuclflush and cpusyscall.
1096
1097         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1098         syscall and sysret.
1099         * i386-init.h: Regenerated.
1100         * i386-tbl.h: Likewise.
1101
1102 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1103
1104         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1105         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1106         (cpu_flags): Add CpuRdtscp.
1107         (set_bitfield): Remove CpuSledgehammer check.
1108
1109         * i386-opc.h (CpuRdtscp): New.
1110         (CpuLM): Updated.
1111         (i386_cpu_flags): Add cpurdtscp.
1112
1113         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1114         * i386-init.h: Regenerated.
1115         * i386-tbl.h: Likewise.
1116
1117 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1118
1119         * ppc-opc.c (PPCNONE): Define.
1120         (NOPOWER4): Delete.
1121         (powerpc_opcodes): Initialize the new "deprecated" field.
1122
1123 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1124
1125         AVX Programming Reference (December, 2008)
1126         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1127         (VEX_LEN_E7_P_2_M_0): Likewise.
1128         (VEX_LEN_2C_P_1): Updated.
1129         (VEX_LEN_E8_P_2): Likewise.
1130         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1131         (mod_table): Likewise.
1132
1133         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1134         * i386-tbl.h: Regenerated.
1135
1136 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1137
1138         * i386-gen.c (process_copyright): Update for 2009.
1139
1140         * i386-init.h: Regenerated.
1141         * i386-tbl.h: Likewise.
1142
1143 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1144
1145         AVX Programming Reference (December, 2008)
1146         * i386-dis.c (OP_VEX_FMA): Removed.
1147         (OP_EX_VexW): Likewise.
1148         (OP_EX_VexImmW): Likewise.
1149         (OP_XMM_VexW): Likewise.
1150         (VEXI4_Fixup): Likewise.
1151         (VPERMIL2_Fixup): Likewise.
1152         (VexI4): Likewise.
1153         (VexFMA): Likewise.
1154         (Vex128FMA): Likewise.
1155         (EXVexW): Likewise.
1156         (EXdVexW): Likewise.
1157         (EXqVexW): Likewise.
1158         (EXVexImmW): Likewise.
1159         (XMVexW): Likewise.
1160         (VPERMIL2): Likewise.
1161         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1162         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1163         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1164         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1165         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1166         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1167         (get_vex_imm8): Likewise.
1168         (OP_EX_VexReg): Likewise.
1169         vpermil2_op): Likewise.
1170         (EXVexWdq): New.
1171         (vex_w_dq_mode): Likewise.
1172         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1173         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1174         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1175         (es_reg): Updated.
1176         (PREFIX_VEX_38DB): Likewise.
1177         (PREFIX_VEX_3A4A): Likewise.
1178         (PREFIX_VEX_3A60): Likewise.
1179         (PREFIX_VEX_3ADF): Likewise.
1180         (VEX_LEN_3ADF_P_2): Likewise.
1181         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1182         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1183         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1184         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1185         PREFIX_VEX_3896...PREFIX_VEX_389F,
1186         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1187         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1188         (vex_table): Likewise.
1189         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1190         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1191         (putop): Support "%XW".
1192         (intel_operand_size): Handle vex_w_dq_mode.
1193
1194         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1195
1196         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1197         instructions.  Add new FMA instructions.
1198         * i386-tbl.h: Regenerated.
1199
1200 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1201
1202         * or32-opc.c (or32_print_register, or32_print_immediate,
1203         disassemble_insn): Don't rely on undefined sprintf behaviour.
1204
1205 For older changes see ChangeLog-2008
1206 \f
1207 Local Variables:
1208 mode: change-log
1209 left-margin: 8
1210 fill-column: 74
1211 version-control: never
1212 End: