1 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3 * mips-dis.c (is_newabi): EABI is not a NewABI.
5 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
7 * configure.in (shle-*-*elf*): Include sh64 support.
8 * configure: Regenerate.
10 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
12 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
13 (print_insn_mode): Print some basic info about floating point values.
15 2002-05-09 Anton Blanchard <anton@samba.org>
17 * ppc-opc.c: Add "tlbiel" for POWER4.
19 2002-05-07 Graydon Hoare <graydon@redhat.com>
21 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
22 than just most-recently-opened.
24 2002-05-01 Alan Modra <amodra@bigpond.net.au>
26 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
28 2002-04-24 Christian Groessler <chris@groessler.org>
30 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
31 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
33 (z8k_lookup_instr): CLASS_IGNORE case added.
34 (output_instr): Don't print hex codes, they are already
36 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
37 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
38 (unparse_instr): Fix base and indexed addressing disassembly:
39 The index is inside the brackets.
40 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
41 (opt): Fix shift left/right arithmetic/logical byte defines:
42 The high byte of the immediate word is ignored by the
44 Fix n parameter of ldm opcodes: The opcode contains (n-1).
45 (args): Fix "n" entry.
46 (toks): Add "nim4" and "iiii" entries.
47 * z8k-opc.h: Regenerated with new z8kgen.c.
49 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
51 * po/id.po: New Indonesian translation.
52 * configure.in (ALL_LIGUAS): Add id.po
53 * configure: Regenerate.
55 2002-04-17 matthew green <mrg@redhat.com>
57 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
59 2002-04-04 Alan Modra <amodra@bigpond.net.au>
61 * dep-in.sed: Cope with absolute paths.
62 * Makefile.am (dep.sed): Subst TOPDIR.
64 * Makefile.in: Regenerate.
65 * ppc-opc.c: Whitespace.
66 * s390-dis.c: Fix copyright date.
68 2002-03-23 matthew green <mrg@redhat.com>
70 * ppc-opc.c (vmaddfp): Fix operand order.
72 2002-03-21 Alan Modra <amodra@bigpond.net.au>
74 * Makefile.am: Run "make dep-am".
75 * Makefile.in: Regenerate.
77 2002-03-21 Anton Blanchard <anton@samba.org>
79 * ppc-opc.c: Add optional field to mtmsrd.
80 (MTMSRD_L, XRLARB_MASK): Define.
82 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
84 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
86 (print_insn) Likewise.
87 (putop): Fix handling of 'E'
88 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
91 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
93 * po/fr.po: Updated version.
95 2002-03-16 Chris Demetriou <cgd@broadcom.com>
97 * mips-opc.c (M3D): Tweak comment.
98 (mips_builtin_op): Add comment indicating that opcodes of the
99 same name must be placed together in the table, and sort
100 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
101 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
103 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
105 * Makefile.am: Tidy up sh64 rules.
106 * Makefile.in: Regenerate.
108 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
110 * mips-dis.c: Update copyright years.
112 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
114 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
115 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
116 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
117 indicate that they should dissassemble all applicable
119 * mips-opc.c: Add support for MIPS-3D instructions.
120 (M3D): New definition.
122 * mips-opc.c: Update copyright years.
124 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
126 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
128 2002-03-15 Chris Demetriou <cgd@broadcom.com>
130 * mips-dis.c (is_newabi): Fix ABI decoding.
132 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
134 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
135 and bfd_mach_mipsisa64 cases to match the rest.
137 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
139 * po/fr.po: Updated version.
141 2002-03-13 Alan Modra <amodra@bigpond.net.au>
143 * ppc-opc.c: Add optional `L' field to tlbie.
144 (XRTLRA_MASK): Define.
146 2002-03-06 Chris Demetriou <cgd@broadcom.com>
148 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
151 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
153 2002-03-05 Paul Koning <pkoning@equallogic.com>
155 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
156 for float opcodes that take float operands. Add alternate
157 names (xxxD vs. xxxF) for float opcodes.
158 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
159 (print_foperand): New function to handle float opcode operands.
160 (print_insn_pdp11): Use print_foperand to disassemble float ops.
162 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
166 2002-02-26 Brian Gaeke <brg@dgate.org>
168 * Makefile.am (install-data-local): Install dis-asm.h.
170 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
172 * configure.in (LINGUAS): Add de.po.
173 * configure: Regenerate.
174 * po/de.po: New file.
176 2002-02-25 Alan Modra <amodra@bigpond.net.au>
178 * ppc-dis.c (powerpc_dialect): Handle power4 option.
179 * ppc-opc.c (insert_bdm): Correct description of "at" branch
180 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
181 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
182 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
183 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
184 (PPCCOM32, PPCCOM64): Delete.
185 (NOPOWER4, POWER4): Define.
186 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
187 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
188 are enabled for power4 rather than ppc64.
190 2002-02-20 Tom Rix <trix@redhat.com>
192 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
194 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
196 * s390-dis.c (init_disasm): Use renamed architecture defines.
198 2002-02-19 matthew green <mrg@redhat.com>
200 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
203 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
205 * po/tr.po: Updated translation.
207 2002-02-15 Richard Henderson <rth@redhat.com>
209 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
212 2002-02-15 Richard Henderson <rth@redhat.com>
214 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
217 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
219 * po/da.po: Updated translation.
221 2002-02-12 Graydon Hoare <graydon@redhat.com>
223 * cgen-asm.in (parse_insn_normal): Change call from
224 @arch@_cgen_parse_operand to cd->parse_operand, to
225 facilitate CGEN_ASM_INIT_HOOK doing useful work.
227 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
229 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
232 2002-02-11 Alan Modra <amodra@bigpond.net.au>
234 * Makefile.am: "make dep-am".
235 * Makefile.in: Regenerate.
236 * aclocal.m4: Regenerate.
237 * config.in: Regenerate.
238 * configure: Regenerate.
240 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
242 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
243 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
245 * configure: Regenerate.
247 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
249 * cgen-dis.c: Add prototypes for count_decodable_bits
250 and add_insn_to_hash_chain.
252 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
254 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
255 * configure: Rebuilt.
257 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
259 * or32-opc.c: Fix compile time warning messages.
260 * or32-dis.c: Fix compile time warning messages.
262 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
265 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
266 * sh64-opc.c: Regenerate.
267 2001-03-13 DJ Delorie <dj@redhat.com>
268 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
269 purpose is more obvious.
270 * sh64-opc.c (shmedia_table): Ditto.
271 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
272 (print_insn_shmedia): Ditto.
273 2001-03-12 DJ Delorie <dj@redhat.com>
274 * sh64-opc.c: Adjust comments to reflect reality: replace bits
275 3:0 with zeros (not "reserved"), replace "rrrrrr" with
276 "gggggg" for two-operand floating point opcodes. Remove
278 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
279 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
280 Correct printing of .byte:s. Return number of printed bytes or
282 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
283 to next four-byte-alignment if insn or data is not aligned.
284 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
285 * sh64-dis.c: Update comments and fix comment formatting.
286 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
287 Abort instead of setting length to 0.
288 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
289 crange_bsearch_cmpl, sh64_get_contents_type,
290 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
291 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
292 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
293 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
294 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
295 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
296 address with same prefix as SHcompact.
297 In the disassembler, use a .cranges section for linked executables.
298 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
299 and update for using structure in info->private_data.
300 (struct sh64_disassemble_info): New.
301 (is_shmedia_p): Delete.
302 (crange_qsort_cmpb): New function.
303 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
304 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
305 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
306 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
307 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
308 pair. Display addresses for linked executables only.
309 (print_insn_sh64x_media): Initialize info->private_data by calling
310 init_sh64_disasm_info.
311 (print_insn_sh64x): Ditto. Find out type of contents by calling
312 sh64_contents_type_disasm. Display data regions using ".long" and
313 ".byte" similar to unrecognized opcodes.
314 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
315 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
316 information in section flags before considering symbols. Don't
317 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
318 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
319 matching $target $canon_targets instead of looking at the
320 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
321 * configure: Regenerate.
322 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
323 * sh64-opc.c (shmedia_creg_table): New.
324 * sh64-opc.h (shmedia_creg_info): New type.
325 (shmedia_creg_table): Declare.
326 * sh64-dis.c (creg_name): New function.
327 (print_insn_shmedia): Use it.
328 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
329 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
330 print_insn_sh64l if little-endian.
331 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
332 (print_insn_sh64l): New.
333 (print_insn_sh64x): New.
334 (print_insn_sh64x_media): New.
335 (print_insn_sh64): Break out code to print_insn_sh64x and
336 print_insn_sh64x_media.
337 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
338 * sh64-opc.h: New file
339 * sh64-opc.c: New file
340 * sh64-dis.c: New file
341 * Makefile.am: Add sh64 targets.
342 (HFILES): Add sh64-opc.h.
343 (CFILES): Add sh64-opc.c and sh64-dis.c.
344 (ALL_MACHINES): Add sh64 files.
345 * Makefile.in: Regenerate.
346 * configure.in: Add support for sh64 to bfd_sh_arch.
347 * configure: Regenerate.
348 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
349 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
351 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
352 * po/POTFILES.in: Regenerate.
353 * po/opcodes.pot: Regenerate.
355 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
357 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
359 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
361 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
363 2002-02-01 Alan Modra <amodra@bigpond.net.au>
365 * Makefile.am: Run "make dep-am"
366 * Makefile.in: Regenerate.
368 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
370 * or32-dis.c: New file.
371 * or32-opc.c: New file.
372 * configure.in: Add support for or32.
373 * configure: Regenerate.
374 * Makefile.am: Add support for or32.
375 * Makefile.in: Regenerate.
376 * disassemble.c: Add support for or32.
377 * po/POTFILES.in: Regenerate.
378 * po/opcodes.pot: Regenerate.
380 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
382 * configure: Regenerated.
384 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
386 * po/fr.po: Updated version.
388 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
390 * po/es.po: Updated version.
392 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
394 * po/da.po: New version.
396 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
398 * po/da.po: New file: Spanish translation.
399 * configure.in (ALL_LINGUAS): Add da.
400 * configure: Regenerate.
402 2002-01-22 Graydon Hoare <graydon@redhat.com>
404 * fr30-asm.c: Regenerate.
405 * fr30-desc.c: Likewise.
406 * fr30-desc.h: Likewise.
407 * fr30-dis.c: Likewise.
408 * fr30-ibld.c: Likewise.
409 * fr30-opc.c: Likewise.
410 * fr30-opc.h: Likewise.
411 * m32r-asm.c: Likewise.
412 * m32r-desc.c: Likewise.
413 * m32r-desc.h: Likewise.
414 * m32r-dis.c: Likewise.
415 * m32r-ibld.c: Likewise.
416 * m32r-opc.c: Likewise.
417 * m32r-opc.h: Likewise.
418 * m32r-opinst.c: Likewise.
419 * openrisc-asm.c: Likewise.
420 * openrisc-desc.c: Likewise.
421 * openrisc-desc.h: Likewise.
422 * openrisc-dis.c: Likewise.
423 * openrisc-ibld.c: Likewise.
424 * openrisc-opc.c: Likewise.
425 * openrisc-opc.h: Likewise.
426 * xstormy16-desc.c: Likewise.
428 2002-01-22 Richard Henderson <rth@redhat.com>
430 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
433 2002-01-22 Alan Modra <amodra@bigpond.net.au>
435 * Makefile.am: Run "make dep-am".
436 * Makefile.in: Regenerate.
437 * opcodes/po/POTFILES.in: Regenerate.
439 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
441 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
442 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
444 2002-01-18 Keith Walker <keith.walker@arm.com>
446 * arm-opc.h (arm_opcodes): Add bxj instruction.
448 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
450 * po/opcodes.pot: Regenerate.
451 * po/fr.po: Regenerate.
452 * po/sv.po: Regenerate.
453 * po/tr.po: Regenerate.
455 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
457 * po/tr.po: Import new version.
459 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
461 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
462 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
465 2002-01-10 matthew green <mrg@redhat.com>
467 * xstormy16-asm.c: Regenerate.
468 * xstormy16-desc.c: Likewise.
469 * xstormy16-desc.h: Likewise.
470 * xstormy16-dis.c: Likewise.
471 * xstormy16-opc.c: Likewise.
472 * xstormy16-opc.h: Likewise.
474 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
476 * po/es.po: New file: Spanish translation.
477 * configure.in (ALL_LINGUAS): Add es.
478 * configure: Regenerate.
480 2001-12-31 Jeffrey A Law (law@redhat.com)
482 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
483 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
484 Always emit a space after 'H'.
486 2001-12-18 matthew green <mrg@redhat.com>
488 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
490 2001-12-17 Richard Henderson <rth@redhat.com>
492 * alpha-opc.c (unop): Encode with RB as $sp.
494 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
496 * Makefile.am: Add support for xstormy16.
497 * Makefile.in: Regenerate.
498 * configure.in: Add support for xstormy16.
499 * configure: Regenerate.
500 * disassemble.c: Add support for xstormy16.
501 * xstormy16-asm.c: New generated file.
502 * xstormy16-desc.c: New generated file.
503 * xstormy16-desc.h: New generated file.
504 * xstormy16-dis.c: New generated file.
505 * xstormy16-ibld.c: New generated file.
506 * xstormy16-opc.c: New generated file.
507 * xstormy16-opc.h: New generated file.
509 2001-12-06 Richard Henderson <rth@redhat.com>
511 * alpha-opc.c (alpha_opcodes): Add wh64en.
513 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
515 * d10v-opc.c (d10v_predefined_registers): Remove warnings
516 introduced in Nov 29's patch.
518 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
521 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
524 * d10v-opc.c (RSRC_NOSP): New macro.
525 (d10v_operands): Add it.
526 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
528 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
530 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
531 (RSRC_SP): New macro.
532 (d10v_operands): Add it.
533 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
535 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
537 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
538 Also, break out of the loop as soon as an instruction has been
541 2001-11-17 matthew green <mrg@redhat.com>
543 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
545 2001-11-15 Alan Modra <amodra@bigpond.net.au>
547 * po/POTFILES.in: Regenerate.
549 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
550 (insert_bat, extract_bat, insert_bba, extract_bba,
551 insert_bd, extract_bd, insert_bdm, extract_bdm,
552 insert_bdp, extract_bdp, valid_bo,
553 insert_bo, extract_bo, insert_boe, extract_boe,
554 insert_ds, extract_ds, insert_de, extract_de,
555 insert_des, extract_des, insert_li, extract_li,
556 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
557 insert_nb, extract_nb, insert_nsi, extract_nsi,
558 insert_ral, insert_ram, insert_ras,
559 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
560 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
561 (extract_bd, extract_bdm, extract_bdp,
562 extract_ds, extract_des,
563 extract_li, extract_nsi): Implement sign extension without conditional.
564 (insert_bdm, extract_bdm,
565 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
566 (extract_bdm, extract_bdp): Correct 32 bit validation.
567 (AT1_MASK, AT2_MASK): Define.
568 (BBOAT_MASK): Define.
569 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
570 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
571 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
572 (PPCCOM32, PPCCOM64): Define.
573 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
574 and add new patterns to implement 64 bit branches with hints. Move
575 booke instructions so they match before ppc64.
577 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
578 64 bit default targets, and parse "32" and "64" in options.
580 (print_insn_powerpc): Pass dialect to operand->extract.
582 2001-11-14 Dave Brolley <brolley@redhat.com>
584 * cgen-dis.c (count_decodable_bits): New function.
585 (add_insn_to_hash_chain): New function.
586 (hash_insn_array): Call add_insn_to_hash_chain.
587 (hash_insn_list): Call add_insn_to_hash_chain.
588 * m32r-dis.c: Regenerated.
589 * fr30-dis.c: Regenerated.
591 2001-11-14 Andreas Jaeger <aj@suse.de>
593 * i386-dis.c (print_insn): Use x86-64 as option.
595 2001-11-14 Alan Modra <amodra@bigpond.net.au>
597 * disassemble.c (disassembler): Call print_insn_i386.
598 * i386-dis.c (SUFFIX_ALWAYS): Define.
599 (struct dis_private): Add orig_sizeflag.
600 (print_insn_i386): Make it a wrapper, calling..
601 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
602 warning without using volatile by moving orig_sizeflag to priv,
603 and removing inbuf. Parse disassembler_options.
604 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
606 (putop): Remove #ifdef SUFFIX_ALWAYS.
608 2001-11-11 Timothy Wall <twall@alum.mit.edu>
610 * tic54x-dis.c: Use revised opcode structure. Export opcode
612 (has_lkaddr): Don't forget about Lmem insns.
613 * tic54x-opc.c: Add emulation trap. Parallel table now uses
614 standard opcode templates.
616 2001-11-13 Zack Weinberg <zack@codesourcery.com>
618 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
619 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
620 category instead of Ew.
622 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
624 * m68k-opc.c: Fix definitions of wddata[bwl].
626 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
628 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
629 fit in the buffer, try to match the empty keyword.
631 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
633 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
634 * fr30-ibld.c: Regenerate.
635 * m32r-ibld.c: Regenerate.
636 * openrisc-ibld.c: Regenerate.
638 2001-11-04 Chris Demetriou <cgd@broadcom.com>
640 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
642 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
644 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
645 * configure: Regernate.
646 * po/fr.po: New file.
647 * po/sv.po: New file.
648 * po/tr.po: New file.
650 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
652 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
655 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
657 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
659 * Makefile.in: Regenerate.
660 * mmix-dis.c, mmix-opc.c: New files.
662 2001-10-29 Kazu Hirata <kazu@hxi.com>
664 * d30v-dis.c: Fix a comment typo.
666 2001-10-23 Chris Demetriou <cgd@broadcom.com>
668 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
669 "bltzall" as writing GPR 31 (since they do).
671 * mips-dis.c (print_insn_arg): Calculate info->target
673 (print_insn_mips): Fill in instruction info.
674 (print_mips16_insn_arg): Remove unneded variable 'val'.
675 Removed duplicated instruction target calculations,
676 calculate once and print that result. Use same idiom for
677 masking the jump segment bits as is used in print_insn_arg.
679 2001-10-20 Alan Modra <amodra@bigpond.net.au>
681 * ppc-opc.c (CT): Make it an optional operand.
683 2001-10-17 Chris Demetriou <cgd@broadcom.com>
685 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
686 SB-1 binaries include instructions specific to the SB-1.
687 * mips-opc.c (SB1): New definition.
688 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
689 "recip.ps", "rsqrt.ps", and "sqrt.ps".
691 2001-10-17 matthew green <mrg@redhat.com>
693 * ppc-opc.c (STRM): New AltiVec operand.
694 (XDSS): New AltiVec instruction form.
695 (mtvscr): Correct operand list.
696 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
698 2001-10-17 Alan Modra <amodra@bigpond.net.au>
700 * po/POTFILES.in: Regenerate.
702 2001-10-13 matthew green <mrg@redhat.com>
704 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
705 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
706 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
708 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
710 * cgen-ibld.in: Include safe-ctype.h in preference to
712 * cgen-asm.in: Include safe-ctype.h in preference to
713 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
714 TOLOWER instead of tolower.
715 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
716 string elements in constructed regular expression.
717 * fr30-asm.c: Regenerate.
718 * fr30-desc.c: Regenerate.
719 * fr30-ibld.c: Regenerate.
720 * m32r-asm.c: Regenerate.
721 * m32r-desc.c: Regenerate.
722 * m32r-ibld.c: Regenerate.
723 * openrisc-asm.c: Regenerate.
724 * openrisc-desc.c: Regenerate.
725 * openrisc-ibld.c: Regenerate.
726 * po/opcodes.pot: Regenerate.
728 2001-10-12 matthew green <mrg@redhat.com>
730 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
731 instruction field instruction/extraction functions for new BookE
732 DE form instructions.
733 (CT): New macro for CT field in an X form instruction.
734 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
736 (PPC64): Don't include PPC_OPCODE_PPC.
737 (403): New opcode macro for PPC403 processors.
738 (BOOKE): New opcode macro for BookE processors.
739 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
740 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
741 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
742 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
743 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
744 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
745 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
746 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
747 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
748 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
749 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
750 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
751 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
752 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
754 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
755 for a disassembler option of `booke', `booke32' or `booke64' to enable
756 BookE support in the disassembler.
758 2001-10-12 John Healy <jhealy@redhat.com>
760 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
761 for the length when extracting the base part of the insn.
763 2001-10-09 Bruno Haible <haible@clisp.cons.org>
765 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
766 regular expression. Fix some formatting problems.
767 * fr30-asm.c: Regenerate.
768 * openrisc-asm.c: Regenerate.
769 * m32r-asm.c: Regenerate.
771 2001-10-09 Christian Groessler <cpg@aladdin.de>
773 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
774 of indirect register memory accesses to be same format the
777 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
779 * sh-opc.h: Fix encoding of least significant nibble of the
780 DSP single data transfer instructions.
782 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
785 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
787 * cgen-asm.in: Fix compile time warning messages in generated
789 * cgen-dis.in: The same.
790 * cgen-ibld.in: The same.
791 * fr30-asm.c: Regenerate.
792 * fr30-desc.c: Regenerate.
793 * fr30-dis.c: Regenerate.
794 * fr30-ibld.c: Regenerate.
795 * fr30-opc.c: Regenerate.
796 * m32r-asm.c: Regenerate.
797 * m32r-desc.c: Regenerate.
798 * m32r-dis.c: Regenerate.
799 * m32r-ibld.c: Regenerate.
800 * m32r-opc.c: Regenerate.
801 * m32r-opinst.c Regenerate.
802 * openrisc-asm.c: Regenerate.
803 * openrisc-desc.c: Regenerate.
804 * openrisc-dis.c: Regenerate.
805 * openrisc-ibld.c: Regenerate.
806 * openrisc-opc.c: Regenerate.
807 * openrisc-opc.h: Regenerate.
808 * Makefile.in: Regenerate.
809 * po/POTFILES.in: Regenerate.
810 * po/opcodes.pot: Regenerate.
812 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
814 * arm-opc.h (arm_opcodes): Add cirrus insns.
816 * arm-dis.c (print_insn_arm): Add 'I' case.
818 2001-10-03 Alan Modra <amodra@bigpond.net.au>
820 * po/POTFILES.in: Regenerate.
821 * configure: Regenerate.
823 2001-10-02 Alan Modra <amodra@bigpond.net.au>
825 * Makefile.am (Makefile): Depend on bfd/configure.in.
827 * Makefile.in: Regenerate.
829 2001-09-30 John Healy <jhealy@redhat.com>
831 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
832 calls to cgen_get_insn_value and cgen_put_insn_value calls.
833 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
835 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
837 * Makefile.am: Update dependencies with "make dep-am".
838 * Makefile.in: Regenerate.
840 2001-09-26 Alan Modra <amodra@bigpond.net.au>
842 * arc-dis.c: Formatting fixes.
843 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
845 2001-09-21 Bruno Haible <haible@clisp.cons.org>
847 * arc-dis.c: Don't include <ctype.h>.
848 * openrisc-desc.c: Likewise.
849 * openrisc-ibld.c: Likewise.
851 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
853 * fr30-opc.c: Fix compile time warning messages.
854 * i370-opc.c: Fix compile time warning messages.
855 * i960-dis.c: Fix compile time warning messages.
856 * m32r-asm.c: Fix compile time warning messages.
857 * m32r-desc.c: Fix compile time warning messages.
858 * m32r-dis.c: Fix compile time warning messages.
859 * m32r-ibld.c: Fix compile time warning messages.
860 * m32r-opc.c: Fix compile time warning messages.
861 * m32r-opinst.c: Fix compile time warning messages.
862 * ns32k-dis.c: Fix compile time warning messages.
863 * openrisc-asm.c: Fix compile time warning messages.
864 * openrisc-desc.c: Fix compile time warning messages.
865 * openrisc-dis.c: Fix compile time warning messages.
866 * openrisc-ibld.c: Fix compile time warning messages.
867 * openrisc-opc.c: Fix compile time warning messages.
868 * pdp11-dis.c: Fix compile time warning messages.
869 * tic54x-dis.c: Fix compile time warning messages.
870 * v850-opc.c: Fix compile time warning messages.
871 * vax-dis.c: Fix compile time warning messages.
872 * w65-opc.h: Fix compile time warning messages.
873 * z8k-opc.h: Fix compile time warning messages.
874 * z8kgen.c: Fix compile time warning messages.
876 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
878 * arm-dis.c: Fix compile time warning messages.
879 * cgen-asm.c: Fix compile time warning messages.
880 * cgen-dis.c: Fix compile time warning messages.
881 * cris-dis.c: Fix compile time warning messages.
882 * d10v-dis.c: Fix compile time warning messages.
883 * fr30-asm.c: Fix compile time warning messages.
884 * fr30-desc.c: Fix compile time warning messages.
885 * fr30-dis.c: Fix compile time warning messages.
886 * fr30-ibld.c: Fix compile time warning messages.
888 2001-09-18 Bruno Haible <haible@clisp.cons.org>
890 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
891 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
892 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
893 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
895 (cgen_keyword_add): Use ISALNUM instead of isalnum.
896 (hash_keyword_name): Use TOLOWER instead of tolower.
897 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
898 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
900 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
901 * fr30-desc.c: Don't include <ctype.h>.
902 * fr30-ibld.c: Likewise.
903 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
904 (load_insn_classes, parse_resource_users, load_depfile): Use
905 ISSPACE instead of isspace.
906 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
907 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
909 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
910 * m32r-desc.c: Don't include <ctype.h>.
911 * m32r-ibld.c: Likewise.
912 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
913 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
915 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
917 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
919 * Makefile.am: Add rules and dependencies to create the s/390 opcode
920 table out of s390-opc.txt automatically.
921 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
922 * s390-mkopc.c (dumpTable): Change output to create a complete file.
923 * s390-opc.c: New improved opcode format macros and remove the
924 pregenerated opcode table.
925 * s390-opc.txt: Adapt to new improved opcode format macros.
927 2001-09-14 David Schleef <ds@schleef.org>
929 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
931 2001-09-04 Alan Modra <amodra@bigpond.net.au>
933 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
934 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
936 2001-08-31 Eric Christopher <echristo@redhat.com>
937 Jason Eckhardt <jle@redhat.com>
939 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
940 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
943 2001-08-31 Andreas Jaeger <aj@suse.de>
945 * tic54x-opc.c: Add default initializers to avoid warnings.
947 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
948 * arc-ext.c: Likewise.
950 2001-08-28 matthew green <mrg@redhat.com>
952 * ppc-opc.c (icbt): Order correctly.
954 2001-08-27 David Edelsohn <dje@watson.ibm.com>
955 Torbjorn Granlund <tege@swox.com>
957 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
959 (insert_ds): Complain if not a multiple of 4.
961 (XSYNC_MASK): Define.
962 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
963 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
965 2001-08-26 Andreas Jaeger <aj@suse.de>
967 * h8500-opc.h: Add default initializers to h8500_table to shut up
970 2001-08-25 Andreas Jaeger <aj@suse.de>
972 * tic54x-dis.c: Add unused attributes where needed.
974 * z8k-dis.c (output_instr): Add unused attribute.
976 * h8300-dis.c: Add missing prototypes.
977 (bfd_h8_disassemble): Make static.
979 * cris-dis.c: Add missing prototype.
980 * h8500-dis.c: Likewise.
981 * m68hc11-dis.c: Likewise.
982 * pj-dis.c: Likewise.
983 * tic54x-dis.c: Likewise.
984 * v850-dis.c: Likewise.
985 * vax-dis.c: Likewise.
986 * w65-dis.c: Likewise.
987 * z8k-dis.c: Likewise.
989 * d10v-dis.c: Add missing prototype.
990 (dis_long): Remove unused variable.
991 (dis_2_short): Likewise.
993 * sh-dis.c: Add missing prototypes.
994 * v850-opc.c: Likewise.
995 Add unused attributes where needed.
997 * ns32k-dis.c: Add missing prototypes.
998 (bit_extract_simple): Remove unused variable.
1000 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1002 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1003 branch instructions for gcc 3.0.
1004 * opcodes/s390-opc.txt: Likewise.
1006 2001-08-21 Andreas Jaeger <aj@suse.de>
1008 * i960-dis.c: Add parameters for prototypes
1009 (ctrl): Add unused attributes.
1011 (put_abs): Likewise.
1013 * mips-dis.c: Add missing prototypes.
1014 * a29k-dis.c: Likewise.
1015 * arc-dis.c: Likewise.
1016 * ia64-opc.c: Likewise.
1018 * s390-dis.c: Add missing prototypes.
1019 (init_disasm): Remove unused attribute since the parameter is
1022 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1024 * mips-opc.c (M1): Define. Reformatted Code.
1025 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1028 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1030 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1031 the corresponding non-likely insn is in MIPS I.
1033 2001-08-13 Kazu Hirata <kazu@hxi.com>
1035 * mcore-dis.c: Fix formatting.
1036 * mips-dis.c: Likewise.
1037 * pj-dis.c: Likewise.
1038 * z8k-dis.c: Likewise.
1040 2001-08-12 Richard Henderson <rth@redhat.com>
1042 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1043 to *VALUEP. Regenerate all cgen files.
1045 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1047 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1049 * mips-opc.c (G6): Undefine.
1050 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1051 as the first "move" alternative.
1053 2001-08-10 Andreas Jaeger <aj@suse.de>
1055 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1057 * configure: Regenerate.
1059 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1061 * ppc-opc.c: Revert 2001-08-08.
1063 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1065 * dis-buf.c (generic_strcat_address): Add missing prototype.
1066 #if 0 the functions as it is unused.
1068 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1070 1999-10-25 Torbjorn Granlund <tege@swox.com>
1071 * ppc-opc.c: Include "bfd.h".
1072 (powerpc_operands): Add new field for reloc type.
1074 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1076 * mips-dis.c (print_insn_arg): Don't use software integer registers
1077 for coprocessor registers.
1078 (get_mips_isa): Removed.
1079 (is_newabi): New function, checks if NewABI is used.
1080 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1082 2001-08-01 Christian Groessler <cpg@aladdin.de>
1084 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1085 get stderr definition.
1086 (internal, gas): Removed warnings.
1087 (gas): Create a correct final entry for created array.
1088 * z8k-opc.h: Recreated with new z8kgen.
1090 2001-07-28 Kazu Hirata <kazu@hxi.com>
1092 * i386-dis.c: Fix formatting.
1094 2001-07-28 Matthias Kramm <kramm@quiss.org>
1096 * i386-dis.c: Change formatting conventions for architecture
1097 i386:intel to better match the format of various intel i386
1098 assemblers, like nasm, tasm or masm.
1100 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1102 * Makefile.am: Update dependencies with "make dep-am".
1103 * Makefile.in: Regenerate
1105 2001-07-24 Kazu Hirata <kazu@hxi.com>
1107 * alpha-dis.c: Fix formatting.
1108 * cris-dis.c: Likewise.
1109 * d10v-dis.c: Likewise.
1110 * d30v-dis.c: Likewise.
1111 * m10300-dis.c: Likewise.
1112 * tic54x-dis.c: Likewise.
1114 2001-07-23 Kazu Hirata <kazu@hxi.com>
1116 * m68k-dis.c: Fix formatting.
1117 * pj-dis.c: Likewise.
1118 * s390-dis.c: Likewise.
1119 * z8k-dis.c: Likewise.
1121 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1123 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1124 into the rest of the surrounding definitions.
1126 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1128 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1129 for lgdt, lidt, sgdt, sidt.
1131 2001-07-13 Philip Blundell <philb@gnu.org>
1133 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1135 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1137 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1139 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1140 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1141 to verify if it is worth parsing the insn as insn "x". Also update
1142 error message when insn is not a recognized format of the insn vs
1143 when the insn is completely unrecognized.
1145 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1147 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1149 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1150 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1152 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1154 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1155 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1156 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1158 2001-07-05 Ben Elliston <bje@redhat.com>
1160 * Makefile.am (CPUDIR): Define.
1161 (stamp-m32r): Update dependencies.
1162 (stamp-fr30): Ditto.
1163 (stamp-openrisc): Ditto.
1164 * Makefile.in: Regenerate.
1166 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1168 * ppc-opc.c: Fix encoding of 'clf' instruction.
1170 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1172 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1174 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1176 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1177 * cgen-opc.c (cgen_keyword_add): Ignore special first
1178 character when building nonalpha_chars field.
1180 2001-06-24 Ben Elliston <bje@redhat.com>
1182 * m88k-dis.c: Format to conform to GNU coding standards.
1184 2001-06-23 Andreas Jaeger <aj@suse.de>
1186 * disassemble.c (disassembler_usage): Add unused attribute.
1188 2001-06-22 Eric Christopher <echristo@redhat.com>
1190 * mips-opc.c: Move prefx to start of the table.
1192 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1194 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1197 2001-06-22 Pauli <pauli@moreton.com.au>
1199 * m68k-opc.c: Add wdebug instruction.
1201 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1203 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1205 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1207 * cgen-asm.c (cgen_parse_keyword): When looking for the
1208 boundaries of a keyword, allow any special characters
1209 that are actually in one of the allowed keyword.
1210 * cgen-opc.c (cgen_keyword_add): Add any special characters
1211 to the nonalpha_chars field.
1213 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1215 * s390-opc.c: Add lgh instruction.
1216 * s390-opc.txt: Likewise.
1218 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1220 * i386-dis.c: Group function prototypes in one place.
1221 (FLOATCODE): Redefine as 1.
1222 (USE_GROUPS): Redefine as 2.
1223 (USE_PREFIX_USER_TABLE): Redefine as 3.
1224 (X86_64_SPECIAL): Define as 4.
1225 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1226 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1227 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1228 (dis386): New table combining above four tables.
1229 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1230 (dis386_twobyte): New table combining above two tables.
1231 (x86_64_table): New table to handle x86_64.
1233 (float_mem_att, float_mem_intel): Delet.
1234 (float_mem): New table combining above two tables.
1235 (print_insn_i386): Modify for above.
1236 (dofloat): Likewise.
1237 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1238 Return 0 on success, 1 if no valid alternative.
1239 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1240 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1241 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1242 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1244 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1245 (OP_I64): If not 64-bit mode, call OP_I.
1246 OP_OFF64): If not 64-bit mode, call OP_OFF.
1247 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1248 'ignore'/'ignored' to 'bytemode'.
1250 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1252 * configure.in: Sort 'ta' case statement.
1253 * configure: Regenerate.
1255 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1257 (disx86_64_att): Likewise.
1258 (dis386_twobyte_att): Likewise.
1259 (print_insn_i386): Don't print branch hints as a prefix.
1260 (putop): 'H' macro prints branch hints.
1261 (get64): Kill compile warnings.
1263 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1265 * sh-opc.h (sh_table): Don't use empty initializers.
1267 2001-06-06 Christian Groessler <cpg@aladdin.de>
1269 * z8k-dis.c: Fix formatting.
1270 (unpack_instr): Remove unused cases in switch statement. Add
1271 safety abort() in default case.
1272 (unparse_instr): Add safety abort() in default case.
1274 2001-06-06 Peter Jakubek <pjak@snafu.de>
1276 * m68k-dis.c (print_insn_m68k): Fix typo.
1277 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1278 mcf (ColdFire) div, rem and moveb instructions.
1280 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1282 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1283 (cond_jump_mode, loop_jcxz_mode): Define.
1284 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1285 appropriate, and 'F' suffix to loop insns.
1286 (disx86_64_att): Likewise.
1287 (dis386_twobyte_att): Likewise.
1288 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1289 Output data size prefix for long conditional jumps. Output cs and
1291 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1292 (OP_J): Don't make PREFIX_DATA used.
1294 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1296 * sh-opc.h (sh_table): Complete last element entry to avoid
1299 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1301 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1303 2001-05-23 Alan Modra <amodra@one.net.au>
1305 * arc-opc.c: Whitespace changes.
1307 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1309 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1312 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1314 * cgen-dis.in (extract_normal): Complete support for min<base case.
1316 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1318 * mips-dis.c (INSNLEN): Rename MAXLEN.
1319 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1320 (print_insn_arg): Remove $ prefix of register names.
1321 (set_mips_isa_type): Remove.
1322 (mips_isa_type): New function.
1323 (get_mips_isa): New Function.
1324 (print_insn_mips): Rename _print_insn_mips.
1325 (_print_insn_mips): New function, contains code which was
1326 duplicated in print_insn_big_mips and print_insn_little_mips.
1327 (print_insn_big_mips): Moved code to _print_insn_mips.
1328 (print_insn_little_mips): Likewise.
1329 (print_mips16_insn_arg): Remove $ prefix of register names.
1330 Print error message before abort.
1332 2001-05-14 J.T. Conklin <jtc@redback.com>
1334 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1335 simplified mnemonics used for setting PPC750-specific special
1338 2001-05-12 H.J. Lu <hjl@gnu.org>
1340 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1343 2001-05-12 Peter Targett <peter.targett@arccores.com>
1345 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1346 register to r/w. Formatting fixes throughout file.
1348 2001-05-12 Alan Modra <amodra@one.net.au>
1350 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1352 (twobyte_has_modrm): Update table.
1353 (need_modrm): Give it file scope.
1354 (MODRM_CHECK): Define.
1355 (dofloat): Use MODRM_CHECK.
1360 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1362 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1363 even at end of a section.
1364 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1365 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1367 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1369 * disassemble.c (disassembler_usage): Remove unused attribute.
1371 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1373 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1375 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1377 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1378 assume incoming buffer already has the base insn loaded. Handle
1379 smaller-than-base instructions for variable-length case.
1381 2001-05-04 Alan Modra <amodra@one.net.au>
1383 * i386-dis.c (Ev, Ed): Remove duplicate define.
1386 (OP_XS): New function.
1387 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1389 (dis386_twobyte_intel): Likewise.
1390 (prefix_user_table): Use MS for maskmovq operand.
1392 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1394 * Makefile.am: Add OpenRISC target.
1395 * Makefile.in: Regenerated.
1397 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1399 * configure.in (bfd_openrisc_arch): Add target.
1400 * configure: Regenerated.
1402 * openrisc-asm.c: New file.
1403 * openrisc-desc.c: Likewise.
1404 * openrisc-desc.h: Likewise.
1405 * openrisc-dis.c: Likewise.
1406 * openrisc-ibld.c: Likewise.
1407 * openrisc-opc.c: Likewise.
1408 * openrisc-opc.h: Likewise.
1410 2001-04-24 Christian Groessler <cpg@aladdin.de>
1412 * z8k-dis.c: add names of control registers (ctrl_names);
1413 (seg_length): provides instruction length fixup for segmented
1414 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1415 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1416 (unparse_intr): handle CLASS_PR, print addresses without '#'
1417 * z8k-opc.h: re-created with new z8kgen
1418 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1419 entries for ldctl/ldctlb instruction
1421 2001-04-06 Andreas Jaeger <aj@suse.de>
1423 * i386-dis.c: Add ffreep instruction.
1425 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1427 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1429 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1431 * i386-dis.c (PREGRP25): Define.
1432 (dis386_twobyte_att): Use here in place of "movntq" entry.
1433 (dis386_twobyte_intel): Likewise.
1434 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1436 (dis386_twobyte_att): Use here.
1437 (dis386_twobyte_intel): Likewise.
1438 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1439 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1440 (prefix_user_table): Cosmetic changes to "bad" entries.
1442 2001-03-23 Nick Clifton <nickc@redhat.com>
1444 * mips-opc.c: Remove extraneous whitespace.
1445 * mips-dis.c: Remove extraneous whitespace.
1447 2001-03-22 Ben Elliston <bje@redhat.com>
1449 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1450 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1451 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1452 to allay a compiler warning.
1454 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1456 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1457 (dis386_twobyte_intel): Likewise.
1458 (twobyte_has_modrm): Set entry for paddq, psubq.
1460 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1462 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1463 determination via CGEN_COMPUTE_MACH.
1464 * fr30-desc.c: Regenerate.
1465 * fr30-dis.c: Regenerate.
1466 * fr30-opc.h: Regenerate.
1467 * m32r-desc.c: Regenerate.
1468 * m32r-dis.c: Regenerate.
1469 * m32r-opc.h: Regenerate.
1470 * m32r-opinst.c: Regenerate.
1472 2001-03-20 H.J. Lu <hjl@gnu.org>
1474 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1475 * configure: Rebuild.
1477 2001-03-19 Jim Wilson <wilson@redhat.com>
1479 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1480 notestr if larger than xsect.
1481 (in_class): Handle format M5.
1482 * ia64-asmtab.c: Regnerate.
1484 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1486 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1487 has more than one byte left to read.
1489 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1491 * s390-opc.c: Add new opcodes. Smooth out formatting.
1492 * s390-opc.txt: Add new opcodes.
1494 2001-03-06 Nick Clifton <nickc@redhat.com>
1496 * arm-dis.c (print_insn_thumb): Compute destination address
1497 of BLX(1) instruction by taking bit 1 from PC and not from bit
1500 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1502 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1503 so command line switches will work.
1505 2001-03-05 Dave Brolley <brolley@redhat.com>
1507 * fr30-asm.c: Regenerate.
1508 * fr30-desc.c: Regenerate.
1509 * fr30-desc.h: Regenerate.
1510 * fr30-dis.c: Regenerate.
1511 * fr30-ibld.c: Regenerate.
1512 * fr30-opc.c: Regenerate.
1513 * fr30-opc.h: Regenerate.
1514 * m32r-asm.c: Regenerate.
1515 * m32r-desc.c: Regenerate.
1516 * m32r-desc.h: Regenerate.
1517 * m32r-dis.c: Regenerate.
1518 * m32r-ibld.c: Regenerate.
1519 * m32r-opc.c: Regenerate.
1520 * m32r-opc.h: Regenerate.
1521 * m32r-opinst.c: Regenerate.
1523 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1525 * m68k-opc.c: fix cpushl according to Motorola. Enable
1526 bunch of instructions for Coldfire 5407 and add all new.
1528 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1530 * configure.in (BFD_VERSION): Do without grep.
1531 * configure: Regenerate.
1532 * Makefile.am: Run "make dep-am".
1533 * Makefile.in: Regenerate.
1535 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1537 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1538 * ia64-asmtab.c: Regenerate.
1540 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1542 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1543 separate variants: one for IMM22 and the other for IMM14.
1544 * ia64-asmtab.c: Regenerate.
1546 2001-02-21 Greg McGary <greg@mcgary.org>
1548 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1550 2001-02-20 H.J. Lu <hjl@gnu.org>
1552 * Makefile.am (ia64-ic.tbl): Remove the target.
1553 (ia64-raw.tbl): Likewise.
1554 (ia64-waw.tbl): Likewise.
1555 (ia64-war.tbl): Likewise.
1556 (ia64-asmtab.c): Generate it in the source directory.
1557 * Makefile.in: Regenerated.
1559 2001-02-18 lars brinkhoff <lars@nocrew.org>
1561 * Makefile.am: Add PDP-11 target.
1562 * configure.in: Likewise.
1563 * disassemble.c: Likewise.
1564 * pdp11-dis.c: New file.
1565 * pdp11-opc.c: New file.
1567 2001-02-14 Jim Wilson <wilson@redhat.com>
1569 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1570 * ia64-asmtab.c: Regenerate.
1572 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1574 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1578 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1580 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1581 the following instruction not of the jump itself for the jump
1583 (print_mips16_insn_arg): Likewise.
1585 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1587 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1589 * Makefile.in: Regenerate.
1591 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1593 * Makefile.am: Add linux target for S/390.
1594 * Makefile.in: Likewise.
1595 * configure.in: Likewise.
1596 * disassemble.c: Likewise.
1597 * s390-dis.c: New file.
1598 * s390-mkopc.c: New file.
1599 * s390-opc.c: New file.
1600 * s390-opc.txt: New file.
1602 2001-02-05 Jim Wilson <wilson@redhat.com>
1604 * ia64-asmtab.c: Revert 2000-12-16 change.
1606 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1608 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1609 * m32r-desc.h: Regenerate.
1611 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1613 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1614 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1616 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1618 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1620 2001-01-13 Nick Clifton <nickc@redhat.com>
1622 * disassemble.c: Remove spurious white space.
1624 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1626 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1629 2001-01-11 Peter Targett <peter.targett@arccores.com>
1631 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1632 * Makefile.am (C_FILES): Add arc-ext.c.
1633 (ALL_MACHINES) Add arc-ext.lo.
1634 (INCLUDES) Add opcode directory to list.
1635 New dependency entry for arc-ext.lo.
1636 * disassemble.c (disassembler): Correct call to
1637 arc_get_disassembler.
1638 * arc-opc.c: New update for ARC, including full base
1639 instructions for ARC variants.
1640 * arc-dis.h, arc-dis.c: New update for ARC, including
1641 extensibility functionality.
1642 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1644 2001-01-10 Jan Hubicka <jh@suse.cz>
1646 * i386-dis.c (PREGRP15 - PREGRP24): New.
1647 (dis386_twobyt): Add SSE2 instructions.
1648 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1649 (twobyte_uses_f3_prefix): ... this one.
1650 (grps): Add SSE instructions.
1651 (prefix_user_table): Add two new slots; add SSE2 instructions.
1652 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1653 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1654 to prefix_user_table.
1655 (OP_E): Accept mfence and lfence as well.
1656 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1657 (OP_XMM): Support REX extensions.
1661 2001-01-09 Nick Clifton <nickc@redhat.com>
1663 * arm-dis.c (print_insn): Set pc to zero for instructions with
1664 a reloc associated with them.
1666 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1668 * cgen-asm.in (parse_insn_normal): Changed syn to be
1669 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1670 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1671 to '\0' to use 0 instead.
1672 * cgen-dis.in (print_insn_normal): Ditto.
1673 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1675 2001-01-05 Jan Hubicka <jh@suse.cz>
1677 * i386-dis.c: Add x86_64 support.
1678 (rex): New static variable.
1679 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1680 (USED_REX): New macro.
1681 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1682 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1683 (OP_REG, OP_OFF): Declare.
1684 (get64, get32, get32s): New functions.
1685 (r??_reg): New constants.
1686 (dis386_att): Change templates of instruction implicitly promoted
1687 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1689 (dis386_intel): Likewise.
1690 (dixx86_64_att): New table based on dis386_att.
1691 (dixx86_64_intel): New table based on dis386_intel.
1692 (names64, names8rex): New global variable.
1693 (names32, names16): Add extended registers.
1694 (prefix_user_t): Recognize rex prefixes.
1695 (prefix_name): Print REX prefixes nicely.
1696 (op_riprel): New global variable.
1697 (start_pc): Set type to bfd_vma.
1698 (print_insn_i386): Detect the 64bit mode and use proper table;
1699 move ckprefix after initializing the buffer; output unused rex prefixes;
1700 output information about target of RIP relative addresses.
1701 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1702 (print_operand_value): New function.
1703 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1704 REX prefix and new modes.
1705 (get64, get32s): New.
1706 (get32): Return bfd_signed_vma type.
1707 (set_op): Initialize the op_riprel.
1708 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1710 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1712 cgen-dis.in (read_insn): Use bfd_get_bits()
1714 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1716 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1717 (hash_insn_list): Likewise
1718 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1719 (extract_1): Use bfd_get_bits().
1720 (extract_normal): Apply sign extension to both extraction
1722 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1723 (cgen_put_insn_value): Use bfd_put_bits()
1725 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1727 * cgen-asm.in (parse_insn_normal): Print better error message for
1728 instructions with missing operands.
1730 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1732 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1734 2000-12-16 Nick Clifton <nickc@redhat.com>
1736 * Makefile.in: Regenerate.
1737 * aclocal.m4: Regenerate.
1738 * config.in: Regenerate.
1739 * configure.in: Add spacing.
1740 * configure: Regenerate.
1741 * ia64-asmtab.c: Regenerate.
1742 * po/opcodes.pot: Regenerate.
1744 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1746 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1747 error messages over later parse-time ones.
1749 2000-12-12 Jim Wilson <wilson@redhat.com>
1751 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1753 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1754 (print_dependency_table): Print NULL if semantics field not set.
1755 (insert_opcode_dependencies): Mark cmp parameter as unused.
1756 (print_main_table): Use fprintf_vma to print long long fields.
1757 (main): Mark argv paramter as unused. Convert to old style definition.
1758 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1759 * ia64-asmtab.c: Regnerate.
1761 2000-12-09 Nick Clifton <nickc@redhat.com>
1763 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1766 * fr30-dis.c: Regenerate.
1768 2000-12-08 Peter Targett <peter.targett@arccores.com>
1770 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1771 * Makefile.am (C_FILES): Add arc-ext.c.
1772 (ALL_MACHINES) Add arc-ext.lo.
1773 (INCLUDES) Add opcode directory to list.
1774 New dependency entry for arc-ext.lo.
1775 * disassemble.c (disassembler): Correct call to
1776 arc_get_disassembler.
1777 * arc-opc.c: New update for ARC, including full base
1778 instructions for ARC variants.
1779 * arc-dis.h, arc-dis.c: New update for ARC, including
1780 extensibility functionality.
1781 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1783 2000-12-03 Chris Demetriou cgd@sibyte.com
1785 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1786 MOD_HILO, and MOD_LO macros.
1788 * mips-opc.c (M1, M2): Delete.
1789 (mips_builtin_opcodes): Remove all uses of M1.
1791 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1792 instructions take "G" format second operands and use the
1794 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1796 Delete "sel" code operands from mfc1 and mtc1.
1797 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1800 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1801 Chris Demetriou cgd@sibyte.com
1803 * mips-opc.c (mips_builtin_opcodes): Finish additions
1804 for MIPS32 support, and clean up existing entries for
1805 aesthetics, consistency with the MIPS32 ISA, and
1806 with consistency the rest of the table.
1808 2000-12-01 Nick Clifton <nickc@redhat.com>
1810 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1813 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1815 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1816 specifiers. Update 'B' for new constant names, and remove
1818 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1819 near the top of the array, so they are disassembled properly.
1820 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1821 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1822 specifier. Add 'H' format specifier variants for "mfc1,"
1823 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1824 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1825 "wait" variant which uses 'J' operand specifier.
1827 * mips-dis.c (set_mips_isa_type): Update to use
1828 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1829 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1830 * mips-opc.c (I32): New constant for instructions added in
1833 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1835 * mips-dis.c (set_mips_isa_type): Add cases for
1836 bfd_mach_mips5 and bfd_mach_mips64.
1837 * mips-opc.c (I64): New definitions.
1839 * mips-dis.c (set_mips_isa_type): Add case for
1842 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1844 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1845 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1846 Initialize variable dc to NULL.
1847 (print_insn_shx): Remove unused label d_reg_n.
1849 2000-11-24 Nick Clifton <nickc@redhat.com>
1851 * arm-opc.h: Add new opcode formatting parameter 'B'.
1852 (arm_opcodes): Add XScale, v5, and v5te instructions.
1853 (thumb_opcodes): Add v5t instructions.
1855 * arm-dis.c (print_insn_arm): Handle new 'B' format
1857 (print_insn_thumb): Decode BLX(1) instruction.
1859 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1861 * mips-opc.c: Fix file header comment.
1863 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1865 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1866 print_insn_cris_with_register_prefix.
1868 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1870 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1872 2000-11-07 Matthew Green <mrg@redhat.com>
1874 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1875 must be loaded there in their entirety.
1877 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1879 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1880 (compute_arch_mask): Add v8plusb and v9b machines.
1881 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1882 * sparc-opc.c: Support for Cheetah instruction set.
1883 (prefetch_table): Add #invalidate.
1885 2000-10-16 Nick Clifton <nickc@redhat.com>
1887 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1889 2000-10-06 Dave Brolley <brolley@redhat.com>
1891 * fr30-desc.h: Regenerate.
1892 * m32r-desc.h: Regenerate.
1893 * m32r-ibld.c: Regenerate.
1895 2000-10-05 Jim Wilson <wilson@redhat.com>
1897 * ia64-ic.tbl: Update from Intel.
1898 * ia64-asmtab.c: Regenerate.
1900 2000-10-04 Kazu Hirata <kazu@hxi.com>
1902 * ia64-gen.c: Convert C++-style comments to C-style comments.
1903 * tic54x-dis.c: Likewise.
1905 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1907 Changes to add dollar prefix to registers for files where user symbols
1908 don't have a leading underscore. Fix formatting.
1909 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1910 (format_reg): Add parameter with_reg_prefix. All callers changed.
1911 (print_with_operands): Ditto.
1912 (print_insn_cris_generic): Renamed from print_insn_cris, add
1913 parameter with_reg_prefix.
1914 (print_insn_cris_with_register_prefix,
1915 print_insn_cris_without_register_prefix, cris_get_disassembler):
1917 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1919 2000-09-22 Jim Wilson <wilson@redhat.com>
1921 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1922 gt, ge, ngt, and nge.
1923 * ia64-asmtab.c: Regenerate.
1925 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1926 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1927 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1928 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1929 * ia64-asmtab.c: Regnerate.
1931 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1933 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1934 Add mfc0 and mtc0 with sub-selection values.
1935 Add clo and clz opcodes.
1936 Add msub and msubu instructions for MIPS32.
1937 Add madd/maddu aliases for mad/madu for MIPS32.
1938 Support wait, deret, eret, movn, pref for MIPS32.
1939 Support tlbp, tlbr, tlbwi, tlbwr.
1942 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1943 (print_insn_arg): Handle 'H' args.
1944 (set_mips_isa_type): Recognize 4K.
1945 Use CPU_* defines instead of hardcoded numbers.
1947 2000-09-11 Catherine Moore <clm@redhat.com>
1949 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1950 (d30v_format_tab): Use Rb2 for modinc and moddec.
1952 2000-09-07 Catherine Moore <clm@redhat.com>
1954 * d30v-opc.c (d30v_format_tab): Use format Ra for
1957 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1959 * configure: Rebuilt with new libtool.m4.
1961 2000-09-05 Nick Clifton <nickc@redhat.com>
1963 * configure: Regenerate.
1964 * po/opcodes.pot: Regenerate.
1966 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1968 * acinclude.m4: Include libtool and gettext macros from the
1970 * aclocal.m4, configure: Rebuilt.
1972 2000-08-30 Kazu Hirata <kazu@hxi.com>
1974 * tic80-dis.c: Fix formatting.
1976 2000-08-29 Kazu Hirata <kazu@hxi.com>
1978 * w65-dis.c: Fix formatting.
1980 2000-08-28 Mark Hatle <mhatle@mvista.com>
1982 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1983 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1984 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1985 instructions. Added extended mnemonic mftbl as defined in the
1986 405GP manual for all PPCs.
1988 2000-08-28 Jim Wilson <wilson@redhat.com>
1990 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1991 call. Change last goto to use failed instead of done.
1993 2000-08-28 Dave Brolley <brolley@redhat.com>
1995 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1996 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1997 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1998 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1999 * cgen-dis.in (read_insn): New static function.
2000 (print_insn): Use read_insn to read the insn into the buffer and set
2002 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2004 * fr30-asm.c: Regenerated.
2005 * fr30-desc.c: Regenerated.
2006 * fr30-desc.h: Regenerated.
2007 * fr30-dis.c: Regenerated.
2008 * fr30-ibld.c: Regenerated.
2009 * fr30-opc.c: Regenerated.
2010 * fr30-opc.h: Regenerated.
2011 * m32r-asm.c: Regenerated.
2012 * m32r-desc.c: Regenerated.
2013 * m32r-desc.h: Regenerated.
2014 * m32r-dis.c: Regenerated.
2015 * m32r-ibld.c: Regenerated.
2016 * m32r-opc.c: Regenerated.
2018 2000-08-28 Kazu Hirata <kazu@hxi.com>
2020 * tic30-dis.c: Fix formatting.
2022 2000-08-27 Kazu Hirata <kazu@hxi.com>
2024 * sh-dis.c: Fix formatting.
2026 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2028 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2030 2000-08-24 Kazu Hirata <kazu@hxi.com>
2032 * z8k-dis.c: Fix formatting.
2034 2000-08-16 Jim Wilson <wilson@redhat.com>
2036 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2037 break, mov-immediate, nop.
2038 * ia64-opc-f.c: Delete fpsub instructions.
2039 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2040 address operand. Rewrite using macros to avoid long lines.
2041 * ia64-opc.h (POSTINC): Define.
2042 * ia64-asmtab.c: Regenerate.
2044 2000-08-15 Jim Wilson <wilson@redhat.com>
2046 * ia64-ic.tbl: Add missing entries.
2048 2000-08-08 Jason Eckhardt <jle@redhat.com>
2050 * i860-dis.c (print_br_address): Change third argument from int
2053 2000-08-07 Richard Henderson <rth@redhat.com>
2055 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2056 for MLI templates. Handle IA64_OPND_TGT64.
2058 2000-08-04 Ben Elliston <bje@redhat.com>
2060 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2061 * cgen.sh: Likewise.
2063 2000-08-02 Jim Wilson <wilson@redhat.com>
2065 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2067 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2069 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2070 Change return type from void to int. Check the combination
2071 of operands, return 1 if valid. Fix to avoid BUF overflow.
2072 Report undefined combinations of operands in COMMENT.
2073 Report internal errors to stderr. Output the adiw/sbiw
2074 constant operand in both decimal and hex.
2075 (print_insn_avr): Disassemble ldd/std with displacement of 0
2076 as ld/st. Check avr_operand () return value, handle invalid
2077 combinations of operands like unknown opcodes.
2079 2000-07-28 Ben Elliston <bje@redhat.com>
2081 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2082 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2083 * Makefile.in: Regenerate.
2084 * configure.in: Add --enable-cgen-maint option.
2085 * configure: Regenerate.
2087 2000-07-26 Dave Brolley <brolley@redhat.com>
2089 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2090 (cgen_hw_lookup_by_num): Ditto.
2091 (cgen_operand_lookup_by_name): Ditto.
2092 (print_address): Ditto.
2093 (print_keyword): Ditto.
2094 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2096 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2098 (cgen_parse_keyword): Ditto.
2100 2000-07-22 Jason Eckhardt <jle@redhat.com>
2102 * i860-dis.c: New file.
2103 (print_insn_i860): New function.
2104 (print_br_address): New function.
2105 (sign_extend): New function.
2106 (BITWISE_OP): New macro.
2107 (I860_REG_PREFIX): New macro.
2108 (grnames, frnames, crnames): New structures.
2110 * disassemble.c (ARCH_i860): Define.
2111 (disassembler): Add check for bfd_arch_i860 to set disassemble
2112 function to print_insn_i860.
2114 * Makefile.in (CFILES): Added i860-dis.c.
2115 (ALL_MACHINES): Added i860-dis.lo.
2116 (i860-dis.lo): New dependences.
2118 * configure.in: New bits for bfd_i860_arch.
2120 * configure: Regenerated.
2122 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2124 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2125 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2126 (cris-dis.lo, cris-opc.lo): New rules.
2127 * Makefile.in: Rebuild.
2128 * configure.in (bfd_cris_arch): New target.
2129 * configure: Rebuild.
2130 * disassemble.c (ARCH_cris): Define.
2131 (disassembler): Support ARCH_cris.
2132 * cris-dis.c, cris-opc.c: New files.
2133 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2135 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2137 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2138 Reported by Bill Clarke <llib@computer.org>.
2140 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2142 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2143 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2145 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2147 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2148 fput_const, extract_3, extract_5_load, extract_5_store,
2149 extract_5r_store, extract_5R_store, extract_10U_store,
2150 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2151 extract_12, extract_17, extract_22): Prototype.
2152 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2153 shadowing outer block.
2156 2000-07-05 DJ Delorie <dj@redhat.com>
2160 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2162 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2164 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2166 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2167 marked for translation (exception from the usual coding style).
2168 (print_insn_avr): Initialize insn2 to avoid warnings.
2170 2000-07-03 Kazu Hirata <kazu@hxi.com>
2172 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2173 * h8500-dis.c: Fix formatting.
2175 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2177 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2178 (CLEANFILES): Add DEPA.
2179 * Makefile.in: Regenerate.
2181 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2183 * arm-dis.c (regnames): Add an additional register set to match
2184 the set used by GCC. Make it the default.
2186 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2188 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2190 * Makefile.in: Regenerate.
2192 2000-06-20 H.J. Lu <hjl@gnu.org>
2194 * Makefile.am: Rebuild dependency.
2195 * Makefile.in: Rebuild.
2197 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2199 * Makefile.in, configure: regenerate
2200 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2202 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2204 * configure.in: Recognize m68hc12 and m68hc11.
2205 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2206 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2207 and opcode generation for m68hc11 and m68hc12.
2209 2000-06-16 Nick Duffek <nsd@redhat.com>
2211 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2212 bfd_mach_ppc_620 instead of 620.
2214 2000-06-12 Kazu Hirata <kazu@hxi.com>
2216 * h8300-dis.c: Fix formatting.
2217 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2220 2000-06-09 Denis Chertykov <denisc@overta.ru>
2222 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2224 2000-06-07 Denis Chertykov <denisc@overta.ru>
2226 * avr-dis.c: completely rewritten.
2228 2000-06-02 Kazu Hirata <kazu@hxi.com>
2230 * h8300-dis.c: Follow the GNU coding style.
2231 (bfd_h8_disassemble) Fix a typo.
2233 2000-06-01 Kazu Hirata <kazu@hxi.com>
2235 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2236 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2237 correctly. Fix a typo.
2239 2000-05-31 Nick Clifton <nickc@redhat.com>
2241 * opintl.h (_(String)): Explain why dgettext is used instead of
2244 2000-05-30 Nick Clifton <nickc@redhat.com>
2246 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2247 bindtextdomain): Replace defines with those from intl/libgettext.h
2248 to quieten gcc warnings.
2250 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2252 * Makefile.am: Update dependencies with "make dep-am"
2253 * Makefile.in: Regenerate.
2255 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2257 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2258 sign-extending operands.
2260 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2262 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2265 2000-05-21 Nick Clifton <nickc@redhat.com>
2267 * Makefile.am (LIBIBERTY): Define.
2269 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2271 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2272 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2273 (reg_names): Rename to std_reg_names. Change it to a char **
2275 (std_reg_names): New name for reg_names.
2276 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2279 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2281 * fr30-desc.h: Partially regenerated to account for changed
2282 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2283 * m32r-desc.h: Ditto.
2285 2000-05-15 Nick Clifton <nickc@redhat.com>
2287 * arm-opc.h: Use upper case for flasg in MSR and MRS
2288 instructions. Allow any bit to be set in the field_mask of
2289 the MSR instruction.
2291 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2292 field_mask of an MSR instruction.
2294 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2296 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2297 instructions changed to ldrsb/ldrsh.
2299 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2301 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2302 target addresses for 'jal' and 'j'.
2304 2000-05-10 Geoff Keating <geoffk@redhat.com>
2306 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2307 also available in common mode when powerpc syntax is being used.
2309 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2311 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2312 (dummy_print_address): Ditto.
2314 2000-05-04 Timothy Wall <twall@redhat.com>
2316 * tic54x-opc.c: New.
2317 * tic54x-dis.c: New.
2318 * disassemble.c (disassembler): Add ARCH_tic54x.
2319 * configure.in: Added tic54x target.
2321 * Makefile.am: Add tic54x dependencies.
2322 * Makefile.in: Ditto.
2324 2000-05-03 J.T. Conklin <jtc@redback.com>
2326 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2327 vector unit operands.
2328 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2329 unit instruction formats.
2330 (PPCVEC): New macro, mask for vector instructions.
2331 (powerpc_operands): Add table entries for above operand types.
2332 (powerpc_opcodes): Add table entries for vector instructions.
2334 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2335 (print_insn_little_powerpc): Likewise.
2336 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2338 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2340 * configure.in: Add bfd_powerpc_64_arch.
2341 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2344 2000-04-24 Nick Clifton <nickc@redhat.com>
2346 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2349 2000-04-23 Denis Chertykov <denisc@overta.ru>
2351 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2353 (reg_fmul_r): New. Extract source register from FMUL instruction.
2354 (reg_muls_d): New. Extract destination register from MULS instruction.
2355 (reg_muls_r): New. Extract source register from MULS instruction.
2356 (reg_movw_d): New. Extract destination register from MOVW instruction.
2357 (reg_movw_r): New. Extract source register from MOVW instruction.
2358 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2359 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2361 2000-04-22 Timothy Wall <twall@redhat.com>
2363 * ia64-gen.c (general): Add an ordered table of primary
2364 opcode names, as well as priority fields to disassembly data
2365 structures to enforce a preferred disassembly format based on the
2366 ordering of the opcode tables.
2367 (load_insn_classes): Show a useful message if IC tables are missing.
2368 (load_depfile): Ditto.
2369 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2370 distinguish preferred disassembly.
2371 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2372 format. Fix incorrect flag on fma.s/fma.s.s0.
2373 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2374 the highest priority.
2375 * ia64-opc-b.c: Use more abbreviations.
2376 * ia64-asmtab.c: Regenerate.
2378 2000-04-21 Jason Eckhardt <jle@redhat.com>
2380 * hppa-dis.c (extract_16): New function.
2381 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2382 new operand types l,y,&,fe,fE,fx.
2384 2000-04-21 Richard Henderson <rth@redhat.com>
2385 David Mosberger <davidm@hpl.hp.com>
2386 Timothy Wall <twall@redhat.com>
2387 Bob Manson <manson@charmed.cygnus.com>
2388 Jim Wilson <wilson@redhat.com>
2390 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2391 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2392 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2394 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2395 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2396 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2397 * Makefile.in: Rebuild.
2398 * configure Rebuild.
2399 * configure.in (bfd_ia64_arch): New target.
2400 * disassemble.c (ARCH_ia64): Define.
2401 (disassembler): Support ARCH_ia64.
2402 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2403 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2404 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2405 ia64-war.tbl, ia64-waw.tbl: New files.
2407 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2409 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2410 (disassemble): Use them.
2412 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2414 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2415 * Makefile.am: Update dependencies.
2416 * Makefile.in: Regenerate.
2418 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2420 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2421 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2422 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2423 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2424 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2425 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2426 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2427 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2428 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2429 ansidecl.h as sysdep.h includes it.
2431 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2433 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2434 --enable-build-warnings option.
2435 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2436 * Makefile.in, configure: Re-generate.
2438 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2440 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2441 stc GBR,@-<REG_N> is available for arch_sh1_up.
2442 Group parallel processing insn with identical mnemonics together.
2443 Make three-operand psha / pshl come first.
2445 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2447 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2448 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2449 (sh_arg_type): Add A_PC.
2450 (sh_table): Update entries using immediates. Add repeat.
2451 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2452 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2454 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2456 * po/opcodes.pot: Regenerate.
2458 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2459 (DEP): Quote when passing vars to sub-make. Add warning message
2461 (DEP1): Rewrite for "gcc -MM".
2462 (CLEANFILES): Add DEP2.
2463 Update dependencies.
2464 * Makefile.in: Regenerate.
2466 2000-04-03 Denis Chertykov <denisc@overta.ru>
2468 * avr-dis.c: Syntax cleanup.
2469 (add0fff): Print the pc relative address as a signed number.
2470 (add03f8): Likewise.
2472 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2474 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2475 the parameter ATTRIBUTE_UNUSED.
2476 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2478 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2480 * m10300-opc.c: SP-based offsets are always unsigned.
2482 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2484 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2485 [branch always] instead of "undefined".
2487 2000-03-27 Nick Clifton <nickc@redhat.com>
2489 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2490 short instructions, from end of list of long instructions.
2492 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2494 * Makefile.am (CFILES): Add avr-dis.c.
2495 (ALL_MACHINES): Add avr-dis.lo.
2497 2000-03-27 Alan Modra <alan@linuxcare.com>
2499 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2501 (print_insn_avr): Call function via pointer in K&R compatible way.
2502 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2503 add0fff, add03f8): Convert to old style function declaration and
2505 (avrdis_opcode): Add prototype.
2507 2000-03-27 Denis Chertykov <denisc@overta.ru>
2509 * avr-dis.c: New file. AVR disassembler.
2510 * configure.in (bfd_avr_arch): New architecture support.
2511 * disassemble.c: Likewise.
2512 * configure: Regenerate.
2514 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2516 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2518 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2520 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2521 flag to determine if operand is pc-relative.
2523 (d30v_format_table):
2524 (REL6S3): Renamed from IMM6S3.
2525 Added flag OPERAND_PCREL.
2526 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2527 added flag OPERAND_PCREL.
2528 (IMM12S3U): Replaced with REL12S3.
2529 (SHORT_D2, LONG_D): Delay target is pc-relative.
2530 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2531 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2532 using the REL* operands.
2533 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2534 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2535 LONG_Db, using REL* operands.
2536 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2537 (d30v_opcode_table): Use new *r formats.
2539 2000-02-28 Nick Clifton <nickc@redhat.com>
2541 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2542 'signed_overflow_ok_p'.
2544 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2546 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2547 name of the libtool directory.
2548 * Makefile.in: Rebuild.
2550 2000-02-24 Nick Clifton <nickc@redhat.com>
2552 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2553 (cgen_clear_signed_overflow_ok): New function.
2554 (cgen_signed_overflow_ok_p): New function.
2556 2000-02-23 Andrew Haley <aph@redhat.com>
2558 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2559 m32r-ibld.c, m32r-opc.h: Rebuild.
2561 2000-02-23 Linas Vepstas <linas@linas.org>
2563 * i370-dis.c, i370-opc.c: New.
2565 * disassemble.c (ARCH_i370): Define.
2566 (disassembler): Handle it.
2568 * Makefile.am: Add support for Linux/IBM 370.
2569 * configure.in: Likewise.
2571 * Makefile.in: Regenerate.
2572 * configure: Likewise.
2574 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2576 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2577 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2580 2000-02-22 Andrew Haley <aph@redhat.com>
2582 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2584 * mips-opc.c (G6): New define.
2585 (mips_builtin_op): Add "move" definition for -gp32.
2587 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2589 From Grant Erickson <gerickso@Brocade.COM>:
2590 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2592 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2594 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2597 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2599 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2600 (print_insn_ppi): Likewise.
2601 (print_insn_shx): Use info->mach to select appropriate insn set.
2602 Add support for sh-dsp. Remove FD_REG_N support.
2603 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2604 (sh_arg_type): Likewise. Remove FD_REG_N.
2605 (sh_dsp_reg_nums): New enum.
2606 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2607 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2608 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2609 (arch_sh3_dsp_up): Likewise.
2610 (sh_opcode_info): New field: arch.
2611 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2612 D_REG_N. Fill in arch field. Add sh-dsp insns.
2614 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2616 * arm-dis.c: Change flavor name from atpcs-special to
2617 special-atpcs to prevent name conflict in gdb.
2618 (get_arm_regname_num_options, set_arm_regname_option,
2619 get_arm_regnames): New functions. API to access the several
2620 flavor of register names. Note: Used by gdb.
2621 (print_insn_thumb): Use the register name entry from the currently
2622 selected flavor for LR and PC.
2624 2000-02-10 Nick Clifton <nickc@redhat.com>
2626 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2628 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2629 "mulsh.h" instructions.
2630 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2632 (print_insn_mcore): Add support for little endian targets.
2633 Add support for MULSH and OPSR classes.
2635 2000-02-07 Nick Clifton <nickc@redhat.com>
2637 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2638 Previous delat did not take.
2640 2000-02-03 Timothy Wall <twall@redhat.com>
2642 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2643 to adjust target address bounds checking and calculate the
2644 appropriate octet offset into data.
2646 2000-01-27 Nick Clifton <nickc@redhat.com>
2648 * arm-dis.c: (parse_disassembler_option): Rename to
2649 parse_arm_disassembler_option and allow to be exported.
2651 * disassemble.c (disassembler_usage): New function: Print out any
2652 target specific disassembler options.
2653 Call arm_disassembler_options() if the ARM architecture is being
2656 * arm-dis.c (NUM_ELEM): Define this macro if not already
2658 (arm_regname): New struct type for ARM register names.
2659 (arm_toggle_regnames): Delete.
2660 (parse_disassembler_option): Use register name structure.
2661 (print_insn): New function: Combines duplicate code found in
2662 print_insn_big_arm and print_insn_little_arm.
2663 (print_insn_big_arm): Call print_insn.
2664 (print_insn_little_arm): Call print_insn.
2665 (print_arm_disassembler_options): Display list of supported,
2666 ARM specific disassembler options.
2668 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2670 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2671 ARM_STT_16BIT flag as Thumb code symbols.
2673 * arm-dis.c (printf_insn_little_arm): Ditto.
2675 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2677 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2678 of raw thumb instructions.
2680 2000-01-20 Nick Clifton <nickc@redhat.com>
2682 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2684 2000-01-03 Nick Clifton <nickc@cygnus.com>
2686 * arm-dis.c (streq): New macro.
2687 (strneq): New macro.
2688 (force_thumb): ew local variable.
2689 (parse_disassembler_option): New function: Parse a single, ARM
2690 specific disassembler command line switch.
2691 (parse_disassembler_option): Call parse_disassembler_option to
2692 parse individual command line switches.
2693 (print_insn_big_arm): Check force_thumb.
2694 (print_insn_little_arm): Check force_thumb.
2696 For older changes see ChangeLog-9899
2702 version-control: never