1 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
3 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
6 2002-02-11 Alan Modra <amodra@bigpond.net.au>
8 * Makefile.am: "make dep-am".
9 * Makefile.in: Regenerate.
10 * aclocal.m4: Regenerate.
11 * config.in: Regenerate.
12 * configure: Regenerate.
14 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
16 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
17 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
19 * configure: Regenerate.
21 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
23 * cgen-dis.c: Add prototypes for count_decodable_bits
24 and add_insn_to_hash_chain.
26 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
28 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
31 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
33 * or32-opc.c: Fix compile time warning messages.
34 * or32-dis.c: Fix compile time warning messages.
36 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
39 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
40 * sh64-opc.c: Regenerate.
41 2001-03-13 DJ Delorie <dj@redhat.com>
42 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
43 purpose is more obvious.
44 * sh64-opc.c (shmedia_table): Ditto.
45 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
46 (print_insn_shmedia): Ditto.
47 2001-03-12 DJ Delorie <dj@redhat.com>
48 * sh64-opc.c: Adjust comments to reflect reality: replace bits
49 3:0 with zeros (not "reserved"), replace "rrrrrr" with
50 "gggggg" for two-operand floating point opcodes. Remove
52 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
53 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
54 Correct printing of .byte:s. Return number of printed bytes or
56 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
57 to next four-byte-alignment if insn or data is not aligned.
58 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
59 * sh64-dis.c: Update comments and fix comment formatting.
60 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
61 Abort instead of setting length to 0.
62 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
63 crange_bsearch_cmpl, sh64_get_contents_type,
64 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
65 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
66 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
67 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
68 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
69 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
70 address with same prefix as SHcompact.
71 In the disassembler, use a .cranges section for linked executables.
72 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
73 and update for using structure in info->private_data.
74 (struct sh64_disassemble_info): New.
75 (is_shmedia_p): Delete.
76 (crange_qsort_cmpb): New function.
77 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
78 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
79 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
80 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
81 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
82 pair. Display addresses for linked executables only.
83 (print_insn_sh64x_media): Initialize info->private_data by calling
84 init_sh64_disasm_info.
85 (print_insn_sh64x): Ditto. Find out type of contents by calling
86 sh64_contents_type_disasm. Display data regions using ".long" and
87 ".byte" similar to unrecognized opcodes.
88 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
89 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
90 information in section flags before considering symbols. Don't
91 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
92 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
93 matching $target $canon_targets instead of looking at the
94 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
95 * configure: Regenerate.
96 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
97 * sh64-opc.c (shmedia_creg_table): New.
98 * sh64-opc.h (shmedia_creg_info): New type.
99 (shmedia_creg_table): Declare.
100 * sh64-dis.c (creg_name): New function.
101 (print_insn_shmedia): Use it.
102 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
103 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
104 print_insn_sh64l if little-endian.
105 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
106 (print_insn_sh64l): New.
107 (print_insn_sh64x): New.
108 (print_insn_sh64x_media): New.
109 (print_insn_sh64): Break out code to print_insn_sh64x and
110 print_insn_sh64x_media.
111 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
112 * sh64-opc.h: New file
113 * sh64-opc.c: New file
114 * sh64-dis.c: New file
115 * Makefile.am: Add sh64 targets.
116 (HFILES): Add sh64-opc.h.
117 (CFILES): Add sh64-opc.c and sh64-dis.c.
118 (ALL_MACHINES): Add sh64 files.
119 * Makefile.in: Regenerate.
120 * configure.in: Add support for sh64 to bfd_sh_arch.
121 * configure: Regenerate.
122 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
123 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
125 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
126 * po/POTFILES.in: Regenerate.
127 * po/opcodes.pot: Regenerate.
129 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
131 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
133 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
135 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
137 2002-02-01 Alan Modra <amodra@bigpond.net.au>
139 * Makefile.am: Run "make dep-am"
140 * Makefile.in: Regenerate.
142 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
144 * or32-dis.c: New file.
145 * or32-opc.c: New file.
146 * configure.in: Add support for or32.
147 * configure: Regenerate.
148 * Makefile.am: Add support for or32.
149 * Makefile.in: Regenerate.
150 * disassemble.c: Add support for or32.
151 * po/POTFILES.in: Regenerate.
152 * po/opcodes.pot: Regenerate.
154 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
156 * configure: Regenerated.
158 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
160 * po/fr.po: Updated version.
162 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
164 * po/es.po: Updated version.
166 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
168 * po/da.po: New version.
170 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
172 * po/da.po: New file: Spanish translation.
173 * configure.in (ALL_LINGUAS): Add da.
174 * configure: Regenerate.
176 2002-01-22 Graydon Hoare <graydon@redhat.com>
178 * fr30-asm.c: Regenerate.
179 * fr30-desc.c: Likewise.
180 * fr30-desc.h: Likewise.
181 * fr30-dis.c: Likewise.
182 * fr30-ibld.c: Likewise.
183 * fr30-opc.c: Likewise.
184 * fr30-opc.h: Likewise.
185 * m32r-asm.c: Likewise.
186 * m32r-desc.c: Likewise.
187 * m32r-desc.h: Likewise.
188 * m32r-dis.c: Likewise.
189 * m32r-ibld.c: Likewise.
190 * m32r-opc.c: Likewise.
191 * m32r-opc.h: Likewise.
192 * m32r-opinst.c: Likewise.
193 * openrisc-asm.c: Likewise.
194 * openrisc-desc.c: Likewise.
195 * openrisc-desc.h: Likewise.
196 * openrisc-dis.c: Likewise.
197 * openrisc-ibld.c: Likewise.
198 * openrisc-opc.c: Likewise.
199 * openrisc-opc.h: Likewise.
200 * xstormy16-desc.c: Likewise.
202 2002-01-22 Richard Henderson <rth@redhat.com>
204 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
207 2002-01-22 Alan Modra <amodra@bigpond.net.au>
209 * Makefile.am: Run "make dep-am".
210 * Makefile.in: Regenerate.
211 * opcodes/po/POTFILES.in: Regenerate.
213 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
215 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
216 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
218 2002-01-18 Keith Walker <keith.walker@arm.com>
220 * arm-opc.h (arm_opcodes): Add bxj instruction.
222 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
224 * po/opcodes.pot: Regenerate.
225 * po/fr.po: Regenerate.
226 * po/sv.po: Regenerate.
227 * po/tr.po: Regenerate.
229 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
231 * po/tr.po: Import new version.
233 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
235 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
236 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
239 2002-01-10 matthew green <mrg@redhat.com>
241 * xstormy16-asm.c: Regenerate.
242 * xstormy16-desc.c: Likewise.
243 * xstormy16-desc.h: Likewise.
244 * xstormy16-dis.c: Likewise.
245 * xstormy16-opc.c: Likewise.
246 * xstormy16-opc.h: Likewise.
248 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
250 * po/es.po: New file: Spanish translation.
251 * configure.in (ALL_LINGUAS): Add es.
252 * configure: Regenerate.
254 2001-12-31 Jeffrey A Law (law@redhat.com)
256 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
257 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
258 Always emit a space after 'H'.
260 2001-12-18 matthew green <mrg@redhat.com>
262 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
264 2001-12-17 Richard Henderson <rth@redhat.com>
266 * alpha-opc.c (unop): Encode with RB as $sp.
268 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
270 * Makefile.am: Add support for xstormy16.
271 * Makefile.in: Regenerate.
272 * configure.in: Add support for xstormy16.
273 * configure: Regenerate.
274 * disassemble.c: Add support for xstormy16.
275 * xstormy16-asm.c: New generated file.
276 * xstormy16-desc.c: New generated file.
277 * xstormy16-desc.h: New generated file.
278 * xstormy16-dis.c: New generated file.
279 * xstormy16-ibld.c: New generated file.
280 * xstormy16-opc.c: New generated file.
281 * xstormy16-opc.h: New generated file.
283 2001-12-06 Richard Henderson <rth@redhat.com>
285 * alpha-opc.c (alpha_opcodes): Add wh64en.
287 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
289 * d10v-opc.c (d10v_predefined_registers): Remove warnings
290 introduced in Nov 29's patch.
292 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
295 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
298 * d10v-opc.c (RSRC_NOSP): New macro.
299 (d10v_operands): Add it.
300 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
302 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
304 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
305 (RSRC_SP): New macro.
306 (d10v_operands): Add it.
307 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
309 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
311 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
312 Also, break out of the loop as soon as an instruction has been
315 2001-11-17 matthew green <mrg@redhat.com>
317 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
319 2001-11-15 Alan Modra <amodra@bigpond.net.au>
321 * po/POTFILES.in: Regenerate.
323 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
324 (insert_bat, extract_bat, insert_bba, extract_bba,
325 insert_bd, extract_bd, insert_bdm, extract_bdm,
326 insert_bdp, extract_bdp, valid_bo,
327 insert_bo, extract_bo, insert_boe, extract_boe,
328 insert_ds, extract_ds, insert_de, extract_de,
329 insert_des, extract_des, insert_li, extract_li,
330 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
331 insert_nb, extract_nb, insert_nsi, extract_nsi,
332 insert_ral, insert_ram, insert_ras,
333 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
334 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
335 (extract_bd, extract_bdm, extract_bdp,
336 extract_ds, extract_des,
337 extract_li, extract_nsi): Implement sign extension without conditional.
338 (insert_bdm, extract_bdm,
339 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
340 (extract_bdm, extract_bdp): Correct 32 bit validation.
341 (AT1_MASK, AT2_MASK): Define.
342 (BBOAT_MASK): Define.
343 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
344 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
345 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
346 (PPCCOM32, PPCCOM64): Define.
347 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
348 and add new patterns to implement 64 bit branches with hints. Move
349 booke instructions so they match before ppc64.
351 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
352 64 bit default targets, and parse "32" and "64" in options.
354 (print_insn_powerpc): Pass dialect to operand->extract.
356 2001-11-14 Dave Brolley <brolley@redhat.com>
358 * cgen-dis.c (count_decodable_bits): New function.
359 (add_insn_to_hash_chain): New function.
360 (hash_insn_array): Call add_insn_to_hash_chain.
361 (hash_insn_list): Call add_insn_to_hash_chain.
362 * m32r-dis.c: Regenerated.
363 * fr30-dis.c: Regenerated.
365 2001-11-14 Andreas Jaeger <aj@suse.de>
367 * i386-dis.c (print_insn): Use x86-64 as option.
369 2001-11-14 Alan Modra <amodra@bigpond.net.au>
371 * disassemble.c (disassembler): Call print_insn_i386.
372 * i386-dis.c (SUFFIX_ALWAYS): Define.
373 (struct dis_private): Add orig_sizeflag.
374 (print_insn_i386): Make it a wrapper, calling..
375 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
376 warning without using volatile by moving orig_sizeflag to priv,
377 and removing inbuf. Parse disassembler_options.
378 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
380 (putop): Remove #ifdef SUFFIX_ALWAYS.
382 2001-11-11 Timothy Wall <twall@alum.mit.edu>
384 * tic54x-dis.c: Use revised opcode structure. Export opcode
386 (has_lkaddr): Don't forget about Lmem insns.
387 * tic54x-opc.c: Add emulation trap. Parallel table now uses
388 standard opcode templates.
390 2001-11-13 Zack Weinberg <zack@codesourcery.com>
392 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
393 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
394 category instead of Ew.
396 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
398 * m68k-opc.c: Fix definitions of wddata[bwl].
400 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
402 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
403 fit in the buffer, try to match the empty keyword.
405 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
407 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
408 * fr30-ibld.c: Regenerate.
409 * m32r-ibld.c: Regenerate.
410 * openrisc-ibld.c: Regenerate.
412 2001-11-04 Chris Demetriou <cgd@broadcom.com>
414 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
416 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
418 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
419 * configure: Regernate.
420 * po/fr.po: New file.
421 * po/sv.po: New file.
422 * po/tr.po: New file.
424 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
426 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
429 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
431 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
433 * Makefile.in: Regenerate.
434 * mmix-dis.c, mmix-opc.c: New files.
436 2001-10-29 Kazu Hirata <kazu@hxi.com>
438 * d30v-dis.c: Fix a comment typo.
440 2001-10-23 Chris Demetriou <cgd@broadcom.com>
442 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
443 "bltzall" as writing GPR 31 (since they do).
445 * mips-dis.c (print_insn_arg): Calculate info->target
447 (print_insn_mips): Fill in instruction info.
448 (print_mips16_insn_arg): Remove unneded variable 'val'.
449 Removed duplicated instruction target calculations,
450 calculate once and print that result. Use same idiom for
451 masking the jump segment bits as is used in print_insn_arg.
453 2001-10-20 Alan Modra <amodra@bigpond.net.au>
455 * ppc-opc.c (CT): Make it an optional operand.
457 2001-10-17 Chris Demetriou <cgd@broadcom.com>
459 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
460 SB-1 binaries include instructions specific to the SB-1.
461 * mips-opc.c (SB1): New definition.
462 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
463 "recip.ps", "rsqrt.ps", and "sqrt.ps".
465 2001-10-17 matthew green <mrg@redhat.com>
467 * ppc-opc.c (STRM): New AltiVec operand.
468 (XDSS): New AltiVec instruction form.
469 (mtvscr): Correct operand list.
470 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
472 2001-10-17 Alan Modra <amodra@bigpond.net.au>
474 * po/POTFILES.in: Regenerate.
476 2001-10-13 matthew green <mrg@redhat.com>
478 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
479 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
480 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
482 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
484 * cgen-ibld.in: Include safe-ctype.h in preference to
486 * cgen-asm.in: Include safe-ctype.h in preference to
487 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
488 TOLOWER instead of tolower.
489 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
490 string elements in constructed regular expression.
491 * fr30-asm.c: Regenerate.
492 * fr30-desc.c: Regenerate.
493 * fr30-ibld.c: Regenerate.
494 * m32r-asm.c: Regenerate.
495 * m32r-desc.c: Regenerate.
496 * m32r-ibld.c: Regenerate.
497 * openrisc-asm.c: Regenerate.
498 * openrisc-desc.c: Regenerate.
499 * openrisc-ibld.c: Regenerate.
500 * po/opcodes.pot: Regenerate.
502 2001-10-12 matthew green <mrg@redhat.com>
504 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
505 instruction field instruction/extraction functions for new BookE
506 DE form instructions.
507 (CT): New macro for CT field in an X form instruction.
508 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
510 (PPC64): Don't include PPC_OPCODE_PPC.
511 (403): New opcode macro for PPC403 processors.
512 (BOOKE): New opcode macro for BookE processors.
513 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
514 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
515 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
516 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
517 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
518 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
519 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
520 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
521 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
522 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
523 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
524 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
525 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
526 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
528 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
529 for a disassembler option of `booke', `booke32' or `booke64' to enable
530 BookE support in the disassembler.
532 2001-10-12 John Healy <jhealy@redhat.com>
534 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
535 for the length when extracting the base part of the insn.
537 2001-10-09 Bruno Haible <haible@clisp.cons.org>
539 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
540 regular expression. Fix some formatting problems.
541 * fr30-asm.c: Regenerate.
542 * openrisc-asm.c: Regenerate.
543 * m32r-asm.c: Regenerate.
545 2001-10-09 Christian Groessler <cpg@aladdin.de>
547 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
548 of indirect register memory accesses to be same format the
551 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
553 * sh-opc.h: Fix encoding of least significant nibble of the
554 DSP single data transfer instructions.
556 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
559 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
561 * cgen-asm.in: Fix compile time warning messages in generated
563 * cgen-dis.in: The same.
564 * cgen-ibld.in: The same.
565 * fr30-asm.c: Regenerate.
566 * fr30-desc.c: Regenerate.
567 * fr30-dis.c: Regenerate.
568 * fr30-ibld.c: Regenerate.
569 * fr30-opc.c: Regenerate.
570 * m32r-asm.c: Regenerate.
571 * m32r-desc.c: Regenerate.
572 * m32r-dis.c: Regenerate.
573 * m32r-ibld.c: Regenerate.
574 * m32r-opc.c: Regenerate.
575 * m32r-opinst.c Regenerate.
576 * openrisc-asm.c: Regenerate.
577 * openrisc-desc.c: Regenerate.
578 * openrisc-dis.c: Regenerate.
579 * openrisc-ibld.c: Regenerate.
580 * openrisc-opc.c: Regenerate.
581 * openrisc-opc.h: Regenerate.
582 * Makefile.in: Regenerate.
583 * po/POTFILES.in: Regenerate.
584 * po/opcodes.pot: Regenerate.
586 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
588 * arm-opc.h (arm_opcodes): Add cirrus insns.
590 * arm-dis.c (print_insn_arm): Add 'I' case.
592 2001-10-03 Alan Modra <amodra@bigpond.net.au>
594 * po/POTFILES.in: Regenerate.
595 * configure: Regenerate.
597 2001-10-02 Alan Modra <amodra@bigpond.net.au>
599 * Makefile.am (Makefile): Depend on bfd/configure.in.
601 * Makefile.in: Regenerate.
603 2001-09-30 John Healy <jhealy@redhat.com>
605 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
606 calls to cgen_get_insn_value and cgen_put_insn_value calls.
607 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
609 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
611 * Makefile.am: Update dependencies with "make dep-am".
612 * Makefile.in: Regenerate.
614 2001-09-26 Alan Modra <amodra@bigpond.net.au>
616 * arc-dis.c: Formatting fixes.
617 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
619 2001-09-21 Bruno Haible <haible@clisp.cons.org>
621 * arc-dis.c: Don't include <ctype.h>.
622 * openrisc-desc.c: Likewise.
623 * openrisc-ibld.c: Likewise.
625 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
627 * fr30-opc.c: Fix compile time warning messages.
628 * i370-opc.c: Fix compile time warning messages.
629 * i960-dis.c: Fix compile time warning messages.
630 * m32r-asm.c: Fix compile time warning messages.
631 * m32r-desc.c: Fix compile time warning messages.
632 * m32r-dis.c: Fix compile time warning messages.
633 * m32r-ibld.c: Fix compile time warning messages.
634 * m32r-opc.c: Fix compile time warning messages.
635 * m32r-opinst.c: Fix compile time warning messages.
636 * ns32k-dis.c: Fix compile time warning messages.
637 * openrisc-asm.c: Fix compile time warning messages.
638 * openrisc-desc.c: Fix compile time warning messages.
639 * openrisc-dis.c: Fix compile time warning messages.
640 * openrisc-ibld.c: Fix compile time warning messages.
641 * openrisc-opc.c: Fix compile time warning messages.
642 * pdp11-dis.c: Fix compile time warning messages.
643 * tic54x-dis.c: Fix compile time warning messages.
644 * v850-opc.c: Fix compile time warning messages.
645 * vax-dis.c: Fix compile time warning messages.
646 * w65-opc.h: Fix compile time warning messages.
647 * z8k-opc.h: Fix compile time warning messages.
648 * z8kgen.c: Fix compile time warning messages.
650 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
652 * arm-dis.c: Fix compile time warning messages.
653 * cgen-asm.c: Fix compile time warning messages.
654 * cgen-dis.c: Fix compile time warning messages.
655 * cris-dis.c: Fix compile time warning messages.
656 * d10v-dis.c: Fix compile time warning messages.
657 * fr30-asm.c: Fix compile time warning messages.
658 * fr30-desc.c: Fix compile time warning messages.
659 * fr30-dis.c: Fix compile time warning messages.
660 * fr30-ibld.c: Fix compile time warning messages.
662 2001-09-18 Bruno Haible <haible@clisp.cons.org>
664 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
665 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
666 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
667 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
669 (cgen_keyword_add): Use ISALNUM instead of isalnum.
670 (hash_keyword_name): Use TOLOWER instead of tolower.
671 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
672 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
674 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
675 * fr30-desc.c: Don't include <ctype.h>.
676 * fr30-ibld.c: Likewise.
677 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
678 (load_insn_classes, parse_resource_users, load_depfile): Use
679 ISSPACE instead of isspace.
680 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
681 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
683 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
684 * m32r-desc.c: Don't include <ctype.h>.
685 * m32r-ibld.c: Likewise.
686 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
687 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
689 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
691 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
693 * Makefile.am: Add rules and dependencies to create the s/390 opcode
694 table out of s390-opc.txt automatically.
695 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
696 * s390-mkopc.c (dumpTable): Change output to create a complete file.
697 * s390-opc.c: New improved opcode format macros and remove the
698 pregenerated opcode table.
699 * s390-opc.txt: Adapt to new improved opcode format macros.
701 2001-09-14 David Schleef <ds@schleef.org>
703 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
705 2001-09-04 Alan Modra <amodra@bigpond.net.au>
707 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
708 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
710 2001-08-31 Eric Christopher <echristo@redhat.com>
711 Jason Eckhardt <jle@redhat.com>
713 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
714 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
717 2001-08-31 Andreas Jaeger <aj@suse.de>
719 * tic54x-opc.c: Add default initializers to avoid warnings.
721 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
722 * arc-ext.c: Likewise.
724 2001-08-28 matthew gren <mrg@redhat.com>
726 * ppc-opc.c (icbt): Order correctly.
728 2001-08-27 David Edelsohn <dje@watson.ibm.com>
729 Torbjorn Granlund <tege@swox.com>
731 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
733 (insert_ds): Complain if not a multiple of 4.
735 (XSYNC_MASK): Define.
736 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
737 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
739 2001-08-26 Andreas Jaeger <aj@suse.de>
741 * h8500-opc.h: Add default initializers to h8500_table to shut up
744 2001-08-25 Andreas Jaeger <aj@suse.de>
746 * tic54x-dis.c: Add unused attributes where needed.
748 * z8k-dis.c (output_instr): Add unused attribute.
750 * h8300-dis.c: Add missing prototypes.
751 (bfd_h8_disassemble): Make static.
753 * cris-dis.c: Add missing prototype.
754 * h8500-dis.c: Likewise.
755 * m68hc11-dis.c: Likewise.
756 * pj-dis.c: Likewise.
757 * tic54x-dis.c: Likewise.
758 * v850-dis.c: Likewise.
759 * vax-dis.c: Likewise.
760 * w65-dis.c: Likewise.
761 * z8k-dis.c: Likewise.
763 * d10v-dis.c: Add missing prototype.
764 (dis_long): Remove unused variable.
765 (dis_2_short): Likewise.
767 * sh-dis.c: Add missing prototypes.
768 * v850-opc.c: Likewise.
769 Add unused attributes where needed.
771 * ns32k-dis.c: Add missing prototypes.
772 (bit_extract_simple): Remove unused variable.
774 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
776 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
777 branch instructions for gcc 3.0.
778 * opcodes/s390-opc.txt: Likewise.
780 2001-08-21 Andreas Jaeger <aj@suse.de>
782 * i960-dis.c: Add parameters for prototypes
783 (ctrl): Add unused attributes.
787 * mips-dis.c: Add missing prototypes.
788 * a29k-dis.c: Likewise.
789 * arc-dis.c: Likewise.
790 * ia64-opc.c: Likewise.
792 * s390-dis.c: Add missing prototypes.
793 (init_disasm): Remove unused attribute since the parameter is
796 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
798 * mips-opc.c (M1): Define. Reformatted Code.
799 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
802 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
804 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
805 the corresponding non-likely insn is in MIPS I.
807 2001-08-13 Kazu Hirata <kazu@hxi.com>
809 * mcore-dis.c: Fix formatting.
810 * mips-dis.c: Likewise.
811 * pj-dis.c: Likewise.
812 * z8k-dis.c: Likewise.
814 2001-08-12 Richard Henderson <rth@redhat.com>
816 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
817 to *VALUEP. Regenerate all cgen files.
819 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
821 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
823 * mips-opc.c (G6): Undefine.
824 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
825 as the first "move" alternative.
827 2001-08-10 Andreas Jaeger <aj@suse.de>
829 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
831 * configure: Regenerate.
833 2001-08-10 Alan Modra <amodra@bigpond.net.au>
835 * ppc-opc.c: Revert 2001-08-08.
837 2001-08-09 Alan Modra <amodra@bigpond.net.au>
839 * dis-buf.c (generic_strcat_address): Add missing prototype.
840 #if 0 the functions as it is unused.
842 2001-08-08 Alan Modra <amodra@bigpond.net.au>
844 1999-10-25 Torbjorn Granlund <tege@swox.com>
845 * ppc-opc.c: Include "bfd.h".
846 (powerpc_operands): Add new field for reloc type.
848 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
850 * mips-dis.c (print_insn_arg): Don't use software integer registers
851 for coprocessor registers.
852 (get_mips_isa): Removed.
853 (is_newabi): New function, checks if NewABI is used.
854 (_print_insn_mips): Get distinction between old ABI and new ABI right.
856 2001-08-01 Christian Groessler <cpg@aladdin.de>
858 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
859 get stderr definition.
860 (internal, gas): Removed warnings.
861 (gas): Create a correct final entry for created array.
862 * z8k-opc.h: Recreated with new z8kgen.
864 2001-07-28 Kazu Hirata <kazu@hxi.com>
866 * i386-dis.c: Fix formatting.
868 2001-07-28 Matthias Kramm <kramm@quiss.org>
870 * i386-dis.c: Change formatting conventions for architecture
871 i386:intel to better match the format of various intel i386
872 assemblers, like nasm, tasm or masm.
874 2001-07-24 Alan Modra <amodra@bigpond.net.au>
876 * Makefile.am: Update dependencies with "make dep-am".
877 * Makefile.in: Regenerate
879 2001-07-24 Kazu Hirata <kazu@hxi.com>
881 * alpha-dis.c: Fix formatting.
882 * cris-dis.c: Likewise.
883 * d10v-dis.c: Likewise.
884 * d30v-dis.c: Likewise.
885 * m10300-dis.c: Likewise.
886 * tic54x-dis.c: Likewise.
888 2001-07-23 Kazu Hirata <kazu@hxi.com>
890 * m68k-dis.c: Fix formatting.
891 * pj-dis.c: Likewise.
892 * s390-dis.c: Likewise.
893 * z8k-dis.c: Likewise.
895 2001-07-21 Chris Demetriou <cgd@broadcom.com>
897 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
898 into the rest of the surrounding definitions.
900 2001-07-18 Alan Modra <amodra@bigpond.net.au>
902 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
903 for lgdt, lidt, sgdt, sidt.
905 2001-07-13 Philip Blundell <philb@gnu.org>
907 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
909 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
911 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
913 (@arch@_cgen_build_insn_regex): New routine from Graydon.
914 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
915 to verify if it is worth parsing the insn as insn "x". Also update
916 error message when insn is not a recognized format of the insn vs
917 when the insn is completely unrecognized.
919 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
921 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
923 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
924 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
926 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
928 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
929 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
930 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
932 2001-07-05 Ben Elliston <bje@redhat.com>
934 * Makefile.am (CPUDIR): Define.
935 (stamp-m32r): Update dependencies.
937 (stamp-openrisc): Ditto.
938 * Makefile.in: Regenerate.
940 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
942 * ppc-opc.c: Fix encoding of 'clf' instruction.
944 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
946 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
948 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
950 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
951 * cgen-opc.c (cgen_keyword_add): Ignore special first
952 character when building nonalpha_chars field.
954 2001-06-24 Ben Elliston <bje@redhat.com>
956 * m88k-dis.c: Format to conform to GNU coding standards.
958 2001-06-23 Andreas Jaeger <aj@suse.de>
960 * disassemble.c (disassembler_usage): Add unused attribute.
962 2001-06-22 Eric Christopher <echristo@redhat.com>
964 * mips-opc.c: Move prefx to start of the table.
966 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
968 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
971 2001-06-22 Pauli <pauli@moreton.com.au>
973 * m68k-opc.c: Add wdebug instruction.
975 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
977 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
979 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
981 * cgen-asm.c (cgen_parse_keyword): When looking for the
982 boundaries of a keyword, allow any special characters
983 that are actually in one of the allowed keyword.
984 * cgen-opc.c (cgen_keyword_add): Add any special characters
985 to the nonalpha_chars field.
987 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
989 * s390-opc.c: Add lgh instruction.
990 * s390-opc.txt: Likewise.
992 2001-06-11 Alan Modra <amodra@bigpond.net.au>
994 * i386-dis.c: Group function prototypes in one place.
995 (FLOATCODE): Redefine as 1.
996 (USE_GROUPS): Redefine as 2.
997 (USE_PREFIX_USER_TABLE): Redefine as 3.
998 (X86_64_SPECIAL): Define as 4.
999 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1000 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1001 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1002 (dis386): New table combining above four tables.
1003 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1004 (dis386_twobyte): New table combining above two tables.
1005 (x86_64_table): New table to handle x86_64.
1007 (float_mem_att, float_mem_intel): Delet.
1008 (float_mem): New table combining above two tables.
1009 (print_insn_i386): Modify for above.
1010 (dofloat): Likewise.
1011 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1012 Return 0 on success, 1 if no valid alternative.
1013 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1014 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1015 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1016 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1018 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1019 (OP_I64): If not 64-bit mode, call OP_I.
1020 OP_OFF64): If not 64-bit mode, call OP_OFF.
1021 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1022 'ignore'/'ignored' to 'bytemode'.
1024 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1026 * configure.in: Sort 'ta' case statement.
1027 * configure: Regenerate.
1029 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1031 (disx86_64_att): Likewise.
1032 (dis386_twobyte_att): Likewise.
1033 (print_insn_i386): Don't print branch hints as a prefix.
1034 (putop): 'H' macro prints branch hints.
1035 (get64): Kill compile warnings.
1037 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1039 * sh-opc.h (sh_table): Don't use empty initializers.
1041 2001-06-06 Christian Groessler <cpg@aladdin.de>
1043 * z8k-dis.c: Fix formatting.
1044 (unpack_instr): Remove unused cases in switch statement. Add
1045 safety abort() in default case.
1046 (unparse_instr): Add safety abort() in default case.
1048 2001-06-06 Peter Jakubek <pjak@snafu.de>
1050 * m68k-dis.c (print_insn_m68k): Fix typo.
1051 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1052 mcf (ColdFire) div, rem and moveb instructions.
1054 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1056 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1057 (cond_jump_mode, loop_jcxz_mode): Define.
1058 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1059 appropriate, and 'F' suffix to loop insns.
1060 (disx86_64_att): Likewise.
1061 (dis386_twobyte_att): Likewise.
1062 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1063 Output data size prefix for long conditional jumps. Output cs and
1065 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1066 (OP_J): Don't make PREFIX_DATA used.
1068 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1070 * sh-opc.h (sh_table): Complete last element entry to avoid
1073 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1075 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1077 2001-05-23 Alan Modra <amodra@one.net.au>
1079 * arc-opc.c: Whitespace changes.
1081 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1083 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1086 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1088 * cgen-dis.in (extract_normal): Complete support for min<base case.
1090 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1092 * mips-dis.c (INSNLEN): Rename MAXLEN.
1093 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1094 (print_insn_arg): Remove $ prefix of register names.
1095 (set_mips_isa_type): Remove.
1096 (mips_isa_type): New function.
1097 (get_mips_isa): New Function.
1098 (print_insn_mips): Rename _print_insn_mips.
1099 (_print_insn_mips): New function, contains code which was
1100 duplicated in print_insn_big_mips and print_insn_little_mips.
1101 (print_insn_big_mips): Moved code to _print_insn_mips.
1102 (print_insn_little_mips): Likewise.
1103 (print_mips16_insn_arg): Remove $ prefix of register names.
1104 Print error message before abort.
1106 2001-05-14 J.T. Conklin <jtc@redback.com>
1108 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1109 simplified mnemonics used for setting PPC750-specific special
1112 2001-05-12 H.J. Lu <hjl@gnu.org>
1114 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1117 2001-05-12 Peter Targett <peter.targett@arccores.com>
1119 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1120 register to r/w. Formatting fixes throughout file.
1122 2001-05-12 Alan Modra <amodra@one.net.au>
1124 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1126 (twobyte_has_modrm): Update table.
1127 (need_modrm): Give it file scope.
1128 (MODRM_CHECK): Define.
1129 (dofloat): Use MODRM_CHECK.
1134 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1136 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1137 even at end of a section.
1138 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1139 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1141 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1143 * disassemble.c (disassembler_usage): Remove unused attribute.
1145 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1147 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1149 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1151 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1152 assume incoming buffer already has the base insn loaded. Handle
1153 smaller-than-base instructions for variable-length case.
1155 2001-05-04 Alan Modra <amodra@one.net.au>
1157 * i386-dis.c (Ev, Ed): Remove duplicate define.
1160 (OP_XS): New function.
1161 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1163 (dis386_twobyte_intel): Likewise.
1164 (prefix_user_table): Use MS for maskmovq operand.
1166 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1168 * Makefile.am: Add OpenRISC target.
1169 * Makefile.in: Regenerated.
1171 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1173 * configure.in (bfd_openrisc_arch): Add target.
1174 * configure: Regenerated.
1176 * openrisc-asm.c: New file.
1177 * openrisc-desc.c: Likewise.
1178 * openrisc-desc.h: Likewise.
1179 * openrisc-dis.c: Likewise.
1180 * openrisc-ibld.c: Likewise.
1181 * openrisc-opc.c: Likewise.
1182 * openrisc-opc.h: Likewise.
1184 2001-04-24 Christian Groessler <cpg@aladdin.de>
1186 * z8k-dis.c: add names of control registers (ctrl_names);
1187 (seg_length): provides instruction length fixup for segmented
1188 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1189 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1190 (unparse_intr): handle CLASS_PR, print addresses without '#'
1191 * z8k-opc.h: re-created with new z8kgen
1192 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1193 entries for ldctl/ldctlb instruction
1195 2001-04-06 Andreas Jaeger <aj@suse.de>
1197 * i386-dis.c: Add ffreep instruction.
1199 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1201 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1203 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1205 * i386-dis.c (PREGRP25): Define.
1206 (dis386_twobyte_att): Use here in place of "movntq" entry.
1207 (dis386_twobyte_intel): Likewise.
1208 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1210 (dis386_twobyte_att): Use here.
1211 (dis386_twobyte_intel): Likewise.
1212 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1213 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1214 (prefix_user_table): Cosmetic changes to "bad" entries.
1216 2001-03-23 Nick Clifton <nickc@redhat.com>
1218 * mips-opc.c: Remove extraneous whitespace.
1219 * mips-dis.c: Remove extraneous whitespace.
1221 2001-03-22 Ben Elliston <bje@redhat.com>
1223 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1224 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1225 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1226 to allay a compiler warning.
1228 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1230 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1231 (dis386_twobyte_intel): Likewise.
1232 (twobyte_has_modrm): Set entry for paddq, psubq.
1234 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1236 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1237 determination via CGEN_COMPUTE_MACH.
1238 * fr30-desc.c: Regenerate.
1239 * fr30-dis.c: Regenerate.
1240 * fr30-opc.h: Regenerate.
1241 * m32r-desc.c: Regenerate.
1242 * m32r-dis.c: Regenerate.
1243 * m32r-opc.h: Regenerate.
1244 * m32r-opinst.c: Regenerate.
1246 2001-03-20 H.J. Lu <hjl@gnu.org>
1248 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1249 * configure: Rebuild.
1251 2001-03-19 Jim Wilson <wilson@redhat.com>
1253 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1254 notestr if larger than xsect.
1255 (in_class): Handle format M5.
1256 * ia64-asmtab.c: Regnerate.
1258 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1260 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1261 has more than one byte left to read.
1263 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1265 * s390-opc.c: Add new opcodes. Smooth out formatting.
1266 * s390-opc.txt: Add new opcodes.
1268 2001-03-06 Nick Clifton <nickc@redhat.com>
1270 * arm-dis.c (print_insn_thumb): Compute destination address
1271 of BLX(1) instruction by taking bit 1 from PC and not from bit
1274 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1276 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1277 so command line switches will work.
1279 2001-03-05 Dave Brolley <brolley@redhat.com>
1281 * fr30-asm.c: Regenerate.
1282 * fr30-desc.c: Regenerate.
1283 * fr30-desc.h: Regenerate.
1284 * fr30-dis.c: Regenerate.
1285 * fr30-ibld.c: Regenerate.
1286 * fr30-opc.c: Regenerate.
1287 * fr30-opc.h: Regenerate.
1288 * m32r-asm.c: Regenerate.
1289 * m32r-desc.c: Regenerate.
1290 * m32r-desc.h: Regenerate.
1291 * m32r-dis.c: Regenerate.
1292 * m32r-ibld.c: Regenerate.
1293 * m32r-opc.c: Regenerate.
1294 * m32r-opc.h: Regenerate.
1295 * m32r-opinst.c: Regenerate.
1297 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1299 * m68k-opc.c: fix cpushl according to Motorola. Enable
1300 bunch of instructions for Coldfire 5407 and add all new.
1302 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1304 * configure.in (BFD_VERSION): Do without grep.
1305 * configure: Regenerate.
1306 * Makefile.am: Run "make dep-am".
1307 * Makefile.in: Regenerate.
1309 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1311 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1312 * ia64-asmtab.c: Regenerate.
1314 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1316 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1317 separate variants: one for IMM22 and the other for IMM14.
1318 * ia64-asmtab.c: Regenerate.
1320 2001-02-21 Greg McGary <greg@mcgary.org>
1322 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1324 2001-02-20 H.J. Lu <hjl@gnu.org>
1326 * Makefile.am (ia64-ic.tbl): Remove the target.
1327 (ia64-raw.tbl): Likewise.
1328 (ia64-waw.tbl): Likewise.
1329 (ia64-war.tbl): Likewise.
1330 (ia64-asmtab.c): Generate it in the source directory.
1331 * Makefile.in: Regenerated.
1333 2001-02-18 lars brinkhoff <lars@nocrew.org>
1335 * Makefile.am: Add PDP-11 target.
1336 * configure.in: Likewise.
1337 * disassemble.c: Likewise.
1338 * pdp11-dis.c: New file.
1339 * pdp11-opc.c: New file.
1341 2001-02-14 Jim Wilson <wilson@redhat.com>
1343 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1344 * ia64-asmtab.c: Regenerate.
1346 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1348 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1352 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1354 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1355 the following instruction not of the jump itself for the jump
1357 (print_mips16_insn_arg): Likewise.
1359 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1361 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1363 * Makefile.in: Regenerate.
1365 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1367 * Makefile.am: Add linux target for S/390.
1368 * Makefile.in: Likewise.
1369 * configure.in: Likewise.
1370 * disassemble.c: Likewise.
1371 * s390-dis.c: New file.
1372 * s390-mkopc.c: New file.
1373 * s390-opc.c: New file.
1374 * s390-opc.txt: New file.
1376 2001-02-05 Jim Wilson <wilson@redhat.com>
1378 * ia64-asmtab.c: Revert 2000-12-16 change.
1380 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1382 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1383 * m32r-desc.h: Regenerate.
1385 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1387 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1388 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1390 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1392 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1394 2001-01-13 Nick Clifton <nickc@redhat.com>
1396 * disassemble.c: Remove spurious white space.
1398 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1400 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1403 2001-01-11 Peter Targett <peter.targett@arccores.com>
1405 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1406 * Makefile.am (C_FILES): Add arc-ext.c.
1407 (ALL_MACHINES) Add arc-ext.lo.
1408 (INCLUDES) Add opcode directory to list.
1409 New dependency entry for arc-ext.lo.
1410 * disassemble.c (disassembler): Correct call to
1411 arc_get_disassembler.
1412 * arc-opc.c: New update for ARC, including full base
1413 instructions for ARC variants.
1414 * arc-dis.h, arc-dis.c: New update for ARC, including
1415 extensibility functionality.
1416 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1418 2001-01-10 Jan Hubicka <jh@suse.cz>
1420 * i386-dis.c (PREGRP15 - PREGRP24): New.
1421 (dis386_twobyt): Add SSE2 instructions.
1422 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1423 (twobyte_uses_f3_prefix): ... this one.
1424 (grps): Add SSE instructions.
1425 (prefix_user_table): Add two new slots; add SSE2 instructions.
1426 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1427 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1428 to prefix_user_table.
1429 (OP_E): Accept mfence and lfence as well.
1430 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1431 (OP_XMM): Support REX extensions.
1435 2001-01-09 Nick Clifton <nickc@redhat.com>
1437 * arm-dis.c (print_insn): Set pc to zero for instructions with
1438 a reloc associated with them.
1440 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1442 * cgen-asm.in (parse_insn_normal): Changed syn to be
1443 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1444 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1445 to '\0' to use 0 instead.
1446 * cgen-dis.in (print_insn_normal): Ditto.
1447 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1449 2001-01-05 Jan Hubicka <jh@suse.cz>
1451 * i386-dis.c: Add x86_64 support.
1452 (rex): New static variable.
1453 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1454 (USED_REX): New macro.
1455 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1456 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1457 (OP_REG, OP_OFF): Declare.
1458 (get64, get32, get32s): New functions.
1459 (r??_reg): New constants.
1460 (dis386_att): Change templates of instruction implicitly promoted
1461 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1463 (dis386_intel): Likewise.
1464 (dixx86_64_att): New table based on dis386_att.
1465 (dixx86_64_intel): New table based on dis386_intel.
1466 (names64, names8rex): New global variable.
1467 (names32, names16): Add extended registers.
1468 (prefix_user_t): Recognize rex prefixes.
1469 (prefix_name): Print REX prefixes nicely.
1470 (op_riprel): New global variable.
1471 (start_pc): Set type to bfd_vma.
1472 (print_insn_i386): Detect the 64bit mode and use proper table;
1473 move ckprefix after initializing the buffer; output unused rex prefixes;
1474 output information about target of RIP relative addresses.
1475 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1476 (print_operand_value): New function.
1477 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1478 REX prefix and new modes.
1479 (get64, get32s): New.
1480 (get32): Return bfd_signed_vma type.
1481 (set_op): Initialize the op_riprel.
1482 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1484 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1486 cgen-dis.in (read_insn): Use bfd_get_bits()
1488 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1490 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1491 (hash_insn_list): Likewise
1492 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1493 (extract_1): Use bfd_get_bits().
1494 (extract_normal): Apply sign extension to both extraction
1496 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1497 (cgen_put_insn_value): Use bfd_put_bits()
1499 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1501 * cgen-asm.in (parse_insn_normal): Print better error message for
1502 instructions with missing operands.
1504 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1506 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1508 2000-12-16 Nick Clifton <nickc@redhat.com>
1510 * Makefile.in: Regenerate.
1511 * aclocal.m4: Regenerate.
1512 * config.in: Regenerate.
1513 * configure.in: Add spacing.
1514 * configure: Regenerate.
1515 * ia64-asmtab.c: Regenerate.
1516 * po/opcodes.pot: Regenerate.
1518 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1520 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1521 error messages over later parse-time ones.
1523 2000-12-12 Jim Wilson <wilson@redhat.com>
1525 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1527 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1528 (print_dependency_table): Print NULL if semantics field not set.
1529 (insert_opcode_dependencies): Mark cmp parameter as unused.
1530 (print_main_table): Use fprintf_vma to print long long fields.
1531 (main): Mark argv paramter as unused. Convert to old style definition.
1532 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1533 * ia64-asmtab.c: Regnerate.
1535 2000-12-09 Nick Clifton <nickc@redhat.com>
1537 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1540 * fr30-dis.c: Regenerate.
1542 2000-12-08 Peter Targett <peter.targett@arccores.com>
1544 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1545 * Makefile.am (C_FILES): Add arc-ext.c.
1546 (ALL_MACHINES) Add arc-ext.lo.
1547 (INCLUDES) Add opcode directory to list.
1548 New dependency entry for arc-ext.lo.
1549 * disassemble.c (disassembler): Correct call to
1550 arc_get_disassembler.
1551 * arc-opc.c: New update for ARC, including full base
1552 instructions for ARC variants.
1553 * arc-dis.h, arc-dis.c: New update for ARC, including
1554 extensibility functionality.
1555 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1557 2000-12-03 Chris Demetriou cgd@sibyte.com
1559 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1560 MOD_HILO, and MOD_LO macros.
1562 * mips-opc.c (M1, M2): Delete.
1563 (mips_builtin_opcodes): Remove all uses of M1.
1565 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1566 instructions take "G" format second operands and use the
1568 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1570 Delete "sel" code operands from mfc1 and mtc1.
1571 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1574 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1575 Chris Demetriou cgd@sibyte.com
1577 * mips-opc.c (mips_builtin_opcodes): Finish additions
1578 for MIPS32 support, and clean up existing entries for
1579 aesthetics, consistency with the MIPS32 ISA, and
1580 with consistency the rest of the table.
1582 2000-12-01 Nick Clifton <nickc@redhat.com>
1584 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1587 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1589 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1590 specifiers. Update 'B' for new constant names, and remove
1592 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1593 near the top of the array, so they are disassembled properly.
1594 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1595 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1596 specifier. Add 'H' format specifier variants for "mfc1,"
1597 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1598 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1599 "wait" variant which uses 'J' operand specifier.
1601 * mips-dis.c (set_mips_isa_type): Update to use
1602 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1603 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1604 * mips-opc.c (I32): New constant for instructions added in
1607 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1609 * mips-dis.c (set_mips_isa_type): Add cases for
1610 bfd_mach_mips5 and bfd_mach_mips64.
1611 * mips-opc.c (I64): New definitions.
1613 * mips-dis.c (set_mips_isa_type): Add case for
1616 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1618 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1619 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1620 Initialize variable dc to NULL.
1621 (print_insn_shx): Remove unused label d_reg_n.
1623 2000-11-24 Nick Clifton <nickc@redhat.com>
1625 * arm-opc.h: Add new opcode formatting parameter 'B'.
1626 (arm_opcodes): Add XScale, v5, and v5te instructions.
1627 (thumb_opcodes): Add v5t instructions.
1629 * arm-dis.c (print_insn_arm): Handle new 'B' format
1631 (print_insn_thumb): Decode BLX(1) instruction.
1633 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1635 * mips-opc.c: Fix file header comment.
1637 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1639 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1640 print_insn_cris_with_register_prefix.
1642 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1644 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1646 2000-11-07 Matthew Green <mrg@redhat.com>
1648 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1649 must be loaded there in their entirety.
1651 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1653 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1654 (compute_arch_mask): Add v8plusb and v9b machines.
1655 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1656 * sparc-opc.c: Support for Cheetah instruction set.
1657 (prefetch_table): Add #invalidate.
1659 2000-10-16 Nick Clifton <nickc@redhat.com>
1661 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1663 2000-10-06 Dave Brolley <brolley@redhat.com>
1665 * fr30-desc.h: Regenerate.
1666 * m32r-desc.h: Regenerate.
1667 * m32r-ibld.c: Regenerate.
1669 2000-10-05 Jim Wilson <wilson@redhat.com>
1671 * ia64-ic.tbl: Update from Intel.
1672 * ia64-asmtab.c: Regenerate.
1674 2000-10-04 Kazu Hirata <kazu@hxi.com>
1676 * ia64-gen.c: Convert C++-style comments to C-style comments.
1677 * tic54x-dis.c: Likewise.
1679 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1681 Changes to add dollar prefix to registers for files where user symbols
1682 don't have a leading underscore. Fix formatting.
1683 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1684 (format_reg): Add parameter with_reg_prefix. All callers changed.
1685 (print_with_operands): Ditto.
1686 (print_insn_cris_generic): Renamed from print_insn_cris, add
1687 parameter with_reg_prefix.
1688 (print_insn_cris_with_register_prefix,
1689 print_insn_cris_without_register_prefix, cris_get_disassembler):
1691 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1693 2000-09-22 Jim Wilson <wilson@redhat.com>
1695 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1696 gt, ge, ngt, and nge.
1697 * ia64-asmtab.c: Regenerate.
1699 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1700 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1701 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1702 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1703 * ia64-asmtab.c: Regnerate.
1705 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1707 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1708 Add mfc0 and mtc0 with sub-selection values.
1709 Add clo and clz opcodes.
1710 Add msub and msubu instructions for MIPS32.
1711 Add madd/maddu aliases for mad/madu for MIPS32.
1712 Support wait, deret, eret, movn, pref for MIPS32.
1713 Support tlbp, tlbr, tlbwi, tlbwr.
1716 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1717 (print_insn_arg): Handle 'H' args.
1718 (set_mips_isa_type): Recognize 4K.
1719 Use CPU_* defines instead of hardcoded numbers.
1721 2000-09-11 Catherine Moore <clm@redhat.com>
1723 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1724 (d30v_format_tab): Use Rb2 for modinc and moddec.
1726 2000-09-07 Catherine Moore <clm@redhat.com>
1728 * d30v-opc.c (d30v_format_tab): Use format Ra for
1731 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1733 * configure: Rebuilt with new libtool.m4.
1735 2000-09-05 Nick Clifton <nickc@redhat.com>
1737 * configure: Regenerate.
1738 * po/opcodes.pot: Regenerate.
1740 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1742 * acinclude.m4: Include libtool and gettext macros from the
1744 * aclocal.m4, configure: Rebuilt.
1746 2000-08-30 Kazu Hirata <kazu@hxi.com>
1748 * tic80-dis.c: Fix formatting.
1750 2000-08-29 Kazu Hirata <kazu@hxi.com>
1752 * w65-dis.c: Fix formatting.
1754 2000-08-28 Mark Hatle <mhatle@mvista.com>
1756 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1757 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1758 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1759 instructions. Added extended mnemonic mftbl as defined in the
1760 405GP manual for all PPCs.
1762 2000-08-28 Jim Wilson <wilson@redhat.com>
1764 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1765 call. Change last goto to use failed instead of done.
1767 2000-08-28 Dave Brolley <brolley@redhat.com>
1769 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1770 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1771 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1772 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1773 * cgen-dis.in (read_insn): New static function.
1774 (print_insn): Use read_insn to read the insn into the buffer and set
1776 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1778 * fr30-asm.c: Regenerated.
1779 * fr30-desc.c: Regenerated.
1780 * fr30-desc.h: Regenerated.
1781 * fr30-dis.c: Regenerated.
1782 * fr30-ibld.c: Regenerated.
1783 * fr30-opc.c: Regenerated.
1784 * fr30-opc.h: Regenerated.
1785 * m32r-asm.c: Regenerated.
1786 * m32r-desc.c: Regenerated.
1787 * m32r-desc.h: Regenerated.
1788 * m32r-dis.c: Regenerated.
1789 * m32r-ibld.c: Regenerated.
1790 * m32r-opc.c: Regenerated.
1792 2000-08-28 Kazu Hirata <kazu@hxi.com>
1794 * tic30-dis.c: Fix formatting.
1796 2000-08-27 Kazu Hirata <kazu@hxi.com>
1798 * sh-dis.c: Fix formatting.
1800 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1802 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1804 2000-08-24 Kazu Hirata <kazu@hxi.com>
1806 * z8k-dis.c: Fix formatting.
1808 2000-08-16 Jim Wilson <wilson@redhat.com>
1810 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1811 break, mov-immediate, nop.
1812 * ia64-opc-f.c: Delete fpsub instructions.
1813 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1814 address operand. Rewrite using macros to avoid long lines.
1815 * ia64-opc.h (POSTINC): Define.
1816 * ia64-asmtab.c: Regenerate.
1818 2000-08-15 Jim Wilson <wilson@redhat.com>
1820 * ia64-ic.tbl: Add missing entries.
1822 2000-08-08 Jason Eckhardt <jle@redhat.com>
1824 * i860-dis.c (print_br_address): Change third argument from int
1827 2000-08-07 Richard Henderson <rth@redhat.com>
1829 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1830 for MLI templates. Handle IA64_OPND_TGT64.
1832 2000-08-04 Ben Elliston <bje@redhat.com>
1834 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1835 * cgen.sh: Likewise.
1837 2000-08-02 Jim Wilson <wilson@redhat.com>
1839 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1841 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1843 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1844 Change return type from void to int. Check the combination
1845 of operands, return 1 if valid. Fix to avoid BUF overflow.
1846 Report undefined combinations of operands in COMMENT.
1847 Report internal errors to stderr. Output the adiw/sbiw
1848 constant operand in both decimal and hex.
1849 (print_insn_avr): Disassemble ldd/std with displacement of 0
1850 as ld/st. Check avr_operand () return value, handle invalid
1851 combinations of operands like unknown opcodes.
1853 2000-07-28 Ben Elliston <bje@redhat.com>
1855 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1856 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1857 * Makefile.in: Regenerate.
1858 * configure.in: Add --enable-cgen-maint option.
1859 * configure: Regenerate.
1861 2000-07-26 Dave Brolley <brolley@redhat.com>
1863 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1864 (cgen_hw_lookup_by_num): Ditto.
1865 (cgen_operand_lookup_by_name): Ditto.
1866 (print_address): Ditto.
1867 (print_keyword): Ditto.
1868 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1870 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1872 (cgen_parse_keyword): Ditto.
1874 2000-07-22 Jason Eckhardt <jle@redhat.com>
1876 * i860-dis.c: New file.
1877 (print_insn_i860): New function.
1878 (print_br_address): New function.
1879 (sign_extend): New function.
1880 (BITWISE_OP): New macro.
1881 (I860_REG_PREFIX): New macro.
1882 (grnames, frnames, crnames): New structures.
1884 * disassemble.c (ARCH_i860): Define.
1885 (disassembler): Add check for bfd_arch_i860 to set disassemble
1886 function to print_insn_i860.
1888 * Makefile.in (CFILES): Added i860-dis.c.
1889 (ALL_MACHINES): Added i860-dis.lo.
1890 (i860-dis.lo): New dependences.
1892 * configure.in: New bits for bfd_i860_arch.
1894 * configure: Regenerated.
1896 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1898 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1899 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1900 (cris-dis.lo, cris-opc.lo): New rules.
1901 * Makefile.in: Rebuild.
1902 * configure.in (bfd_cris_arch): New target.
1903 * configure: Rebuild.
1904 * disassemble.c (ARCH_cris): Define.
1905 (disassembler): Support ARCH_cris.
1906 * cris-dis.c, cris-opc.c: New files.
1907 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1909 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1911 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1912 Reported by Bill Clarke <llib@computer.org>.
1914 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1916 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1917 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1919 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1921 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1922 fput_const, extract_3, extract_5_load, extract_5_store,
1923 extract_5r_store, extract_5R_store, extract_10U_store,
1924 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1925 extract_12, extract_17, extract_22): Prototype.
1926 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1927 shadowing outer block.
1930 2000-07-05 DJ Delorie <dj@redhat.com>
1934 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1936 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1938 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1940 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1941 marked for translation (exception from the usual coding style).
1942 (print_insn_avr): Initialize insn2 to avoid warnings.
1944 2000-07-03 Kazu Hirata <kazu@hxi.com>
1946 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1947 * h8500-dis.c: Fix formatting.
1949 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1951 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1952 (CLEANFILES): Add DEPA.
1953 * Makefile.in: Regenerate.
1955 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1957 * arm-dis.c (regnames): Add an additional register set to match
1958 the set used by GCC. Make it the default.
1960 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1962 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1964 * Makefile.in: Regenerate.
1966 2000-06-20 H.J. Lu <hjl@gnu.org>
1968 * Makefile.am: Rebuild dependency.
1969 * Makefile.in: Rebuild.
1971 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1973 * Makefile.in, configure: regenerate
1974 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1976 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1978 * configure.in: Recognize m68hc12 and m68hc11.
1979 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1980 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1981 and opcode generation for m68hc11 and m68hc12.
1983 2000-06-16 Nick Duffek <nsd@redhat.com>
1985 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1986 bfd_mach_ppc_620 instead of 620.
1988 2000-06-12 Kazu Hirata <kazu@hxi.com>
1990 * h8300-dis.c: Fix formatting.
1991 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1994 2000-06-09 Denis Chertykov <denisc@overta.ru>
1996 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1998 2000-06-07 Denis Chertykov <denisc@overta.ru>
2000 * avr-dis.c: completely rewritten.
2002 2000-06-02 Kazu Hirata <kazu@hxi.com>
2004 * h8300-dis.c: Follow the GNU coding style.
2005 (bfd_h8_disassemble) Fix a typo.
2007 2000-06-01 Kazu Hirata <kazu@hxi.com>
2009 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2010 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2011 correctly. Fix a typo.
2013 2000-05-31 Nick Clifton <nickc@redhat.com>
2015 * opintl.h (_(String)): Explain why dgettext is used instead of
2018 2000-05-30 Nick Clifton <nickc@redhat.com>
2020 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2021 bindtextdomain): Replace defines with those from intl/libgettext.h
2022 to quieten gcc warnings.
2024 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2026 * Makefile.am: Update dependencies with "make dep-am"
2027 * Makefile.in: Regenerate.
2029 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2031 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2032 sign-extending operands.
2034 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2036 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2039 2000-05-21 Nick Clifton <nickc@redhat.com>
2041 * Makefile.am (LIBIBERTY): Define.
2043 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2045 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2046 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2047 (reg_names): Rename to std_reg_names. Change it to a char **
2049 (std_reg_names): New name for reg_names.
2050 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2053 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2055 * fr30-desc.h: Partially regenerated to account for changed
2056 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2057 * m32r-desc.h: Ditto.
2059 2000-05-15 Nick Clifton <nickc@redhat.com>
2061 * arm-opc.h: Use upper case for flasg in MSR and MRS
2062 instructions. Allow any bit to be set in the field_mask of
2063 the MSR instruction.
2065 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2066 field_mask of an MSR instruction.
2068 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2070 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2071 instructions changed to ldrsb/ldrsh.
2073 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2075 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2076 target addresses for 'jal' and 'j'.
2078 2000-05-10 Geoff Keating <geoffk@redhat.com>
2080 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2081 also available in common mode when powerpc syntax is being used.
2083 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2085 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2086 (dummy_print_address): Ditto.
2088 2000-05-04 Timothy Wall <twall@redhat.com>
2090 * tic54x-opc.c: New.
2091 * tic54x-dis.c: New.
2092 * disassemble.c (disassembler): Add ARCH_tic54x.
2093 * configure.in: Added tic54x target.
2095 * Makefile.am: Add tic54x dependencies.
2096 * Makefile.in: Ditto.
2098 2000-05-03 J.T. Conklin <jtc@redback.com>
2100 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2101 vector unit operands.
2102 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2103 unit instruction formats.
2104 (PPCVEC): New macro, mask for vector instructions.
2105 (powerpc_operands): Add table entries for above operand types.
2106 (powerpc_opcodes): Add table entries for vector instructions.
2108 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2109 (print_insn_little_powerpc): Likewise.
2110 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2112 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2114 * configure.in: Add bfd_powerpc_64_arch.
2115 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2118 2000-04-24 Nick Clifton <nickc@redhat.com>
2120 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2123 2000-04-23 Denis Chertykov <denisc@overta.ru>
2125 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2127 (reg_fmul_r): New. Extract source register from FMUL instruction.
2128 (reg_muls_d): New. Extract destination register from MULS instruction.
2129 (reg_muls_r): New. Extract source register from MULS instruction.
2130 (reg_movw_d): New. Extract destination register from MOVW instruction.
2131 (reg_movw_r): New. Extract source register from MOVW instruction.
2132 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2133 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2135 2000-04-22 Timothy Wall <twall@redhat.com>
2137 * ia64-gen.c (general): Add an ordered table of primary
2138 opcode names, as well as priority fields to disassembly data
2139 structures to enforce a preferred disassembly format based on the
2140 ordering of the opcode tables.
2141 (load_insn_classes): Show a useful message if IC tables are missing.
2142 (load_depfile): Ditto.
2143 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2144 distinguish preferred disassembly.
2145 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2146 format. Fix incorrect flag on fma.s/fma.s.s0.
2147 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2148 the highest priority.
2149 * ia64-opc-b.c: Use more abbreviations.
2150 * ia64-asmtab.c: Regenerate.
2152 2000-04-21 Jason Eckhardt <jle@redhat.com>
2154 * hppa-dis.c (extract_16): New function.
2155 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2156 new operand types l,y,&,fe,fE,fx.
2158 2000-04-21 Richard Henderson <rth@redhat.com>
2159 David Mosberger <davidm@hpl.hp.com>
2160 Timothy Wall <twall@redhat.com>
2161 Bob Manson <manson@charmed.cygnus.com>
2162 Jim Wilson <wilson@redhat.com>
2164 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2165 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2166 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2168 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2169 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2170 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2171 * Makefile.in: Rebuild.
2172 * configure Rebuild.
2173 * configure.in (bfd_ia64_arch): New target.
2174 * disassemble.c (ARCH_ia64): Define.
2175 (disassembler): Support ARCH_ia64.
2176 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2177 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2178 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2179 ia64-war.tbl, ia64-waw.tbl: New files.
2181 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2183 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2184 (disassemble): Use them.
2186 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2188 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2189 * Makefile.am: Update dependencies.
2190 * Makefile.in: Regenerate.
2192 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2194 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2195 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2196 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2197 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2198 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2199 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2200 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2201 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2202 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2203 ansidecl.h as sysdep.h includes it.
2205 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2207 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2208 --enable-build-warnings option.
2209 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2210 * Makefile.in, configure: Re-generate.
2212 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2214 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2215 stc GBR,@-<REG_N> is available for arch_sh1_up.
2216 Group parallel processing insn with identical mnemonics together.
2217 Make three-operand psha / pshl come first.
2219 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2221 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2222 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2223 (sh_arg_type): Add A_PC.
2224 (sh_table): Update entries using immediates. Add repeat.
2225 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2226 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2228 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2230 * po/opcodes.pot: Regenerate.
2232 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2233 (DEP): Quote when passing vars to sub-make. Add warning message
2235 (DEP1): Rewrite for "gcc -MM".
2236 (CLEANFILES): Add DEP2.
2237 Update dependencies.
2238 * Makefile.in: Regenerate.
2240 2000-04-03 Denis Chertykov <denisc@overta.ru>
2242 * avr-dis.c: Syntax cleanup.
2243 (add0fff): Print the pc relative address as a signed number.
2244 (add03f8): Likewise.
2246 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2248 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2249 the parameter ATTRIBUTE_UNUSED.
2250 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2252 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2254 * m10300-opc.c: SP-based offsets are always unsigned.
2256 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2258 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2259 [branch always] instead of "undefined".
2261 2000-03-27 Nick Clifton <nickc@redhat.com>
2263 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2264 short instructions, from end of list of long instructions.
2266 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2268 * Makefile.am (CFILES): Add avr-dis.c.
2269 (ALL_MACHINES): Add avr-dis.lo.
2271 2000-03-27 Alan Modra <alan@linuxcare.com>
2273 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2275 (print_insn_avr): Call function via pointer in K&R compatible way.
2276 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2277 add0fff, add03f8): Convert to old style function declaration and
2279 (avrdis_opcode): Add prototype.
2281 2000-03-27 Denis Chertykov <denisc@overta.ru>
2283 * avr-dis.c: New file. AVR disassembler.
2284 * configure.in (bfd_avr_arch): New architecture support.
2285 * disassemble.c: Likewise.
2286 * configure: Regenerate.
2288 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2290 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2292 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2294 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2295 flag to determine if operand is pc-relative.
2297 (d30v_format_table):
2298 (REL6S3): Renamed from IMM6S3.
2299 Added flag OPERAND_PCREL.
2300 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2301 added flag OPERAND_PCREL.
2302 (IMM12S3U): Replaced with REL12S3.
2303 (SHORT_D2, LONG_D): Delay target is pc-relative.
2304 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2305 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2306 using the REL* operands.
2307 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2308 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2309 LONG_Db, using REL* operands.
2310 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2311 (d30v_opcode_table): Use new *r formats.
2313 2000-02-28 Nick Clifton <nickc@redhat.com>
2315 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2316 'signed_overflow_ok_p'.
2318 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2320 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2321 name of the libtool directory.
2322 * Makefile.in: Rebuild.
2324 2000-02-24 Nick Clifton <nickc@redhat.com>
2326 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2327 (cgen_clear_signed_overflow_ok): New function.
2328 (cgen_signed_overflow_ok_p): New function.
2330 2000-02-23 Andrew Haley <aph@redhat.com>
2332 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2333 m32r-ibld.c, m32r-opc.h: Rebuild.
2335 2000-02-23 Linas Vepstas <linas@linas.org>
2337 * i370-dis.c, i370-opc.c: New.
2339 * disassemble.c (ARCH_i370): Define.
2340 (disassembler): Handle it.
2342 * Makefile.am: Add support for Linux/IBM 370.
2343 * configure.in: Likewise.
2345 * Makefile.in: Regenerate.
2346 * configure: Likewise.
2348 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2350 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2351 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2354 2000-02-22 Andrew Haley <aph@redhat.com>
2356 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2358 * mips-opc.c (G6): New define.
2359 (mips_builtin_op): Add "move" definition for -gp32.
2361 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2363 From Grant Erickson <gerickso@Brocade.COM>:
2364 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2366 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2368 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2371 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2373 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2374 (print_insn_ppi): Likewise.
2375 (print_insn_shx): Use info->mach to select appropriate insn set.
2376 Add support for sh-dsp. Remove FD_REG_N support.
2377 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2378 (sh_arg_type): Likewise. Remove FD_REG_N.
2379 (sh_dsp_reg_nums): New enum.
2380 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2381 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2382 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2383 (arch_sh3_dsp_up): Likewise.
2384 (sh_opcode_info): New field: arch.
2385 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2386 D_REG_N. Fill in arch field. Add sh-dsp insns.
2388 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2390 * arm-dis.c: Change flavor name from atpcs-special to
2391 special-atpcs to prevent name conflict in gdb.
2392 (get_arm_regname_num_options, set_arm_regname_option,
2393 get_arm_regnames): New functions. API to access the several
2394 flavor of register names. Note: Used by gdb.
2395 (print_insn_thumb): Use the register name entry from the currently
2396 selected flavor for LR and PC.
2398 2000-02-10 Nick Clifton <nickc@redhat.com>
2400 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2402 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2403 "mulsh.h" instructions.
2404 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2406 (print_insn_mcore): Add support for little endian targets.
2407 Add support for MULSH and OPSR classes.
2409 2000-02-07 Nick Clifton <nickc@redhat.com>
2411 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2412 Previous delat did not take.
2414 2000-02-03 Timothy Wall <twall@redhat.com>
2416 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2417 to adjust target address bounds checking and calculate the
2418 appropriate octet offset into data.
2420 2000-01-27 Nick Clifton <nickc@redhat.com>
2422 * arm-dis.c: (parse_disassembler_option): Rename to
2423 parse_arm_disassembler_option and allow to be exported.
2425 * disassemble.c (disassembler_usage): New function: Print out any
2426 target specific disassembler options.
2427 Call arm_disassembler_options() if the ARM architecture is being
2430 * arm-dis.c (NUM_ELEM): Define this macro if not already
2432 (arm_regname): New struct type for ARM register names.
2433 (arm_toggle_regnames): Delete.
2434 (parse_disassembler_option): Use register name structure.
2435 (print_insn): New function: Combines duplicate code found in
2436 print_insn_big_arm and print_insn_little_arm.
2437 (print_insn_big_arm): Call print_insn.
2438 (print_insn_little_arm): Call print_insn.
2439 (print_arm_disassembler_options): Display list of supported,
2440 ARM specific disassembler options.
2442 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2444 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2445 ARM_STT_16BIT flag as Thumb code symbols.
2447 * arm-dis.c (printf_insn_little_arm): Ditto.
2449 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2451 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2452 of raw thumb instructions.
2454 2000-01-20 Nick Clifton <nickc@redhat.com>
2456 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2458 2000-01-03 Nick Clifton <nickc@cygnus.com>
2460 * arm-dis.c (streq): New macro.
2461 (strneq): New macro.
2462 (force_thumb): ew local variable.
2463 (parse_disassembler_option): New function: Parse a single, ARM
2464 specific disassembler command line switch.
2465 (parse_disassembler_option): Call parse_disassembler_option to
2466 parse individual command line switches.
2467 (print_insn_big_arm): Check force_thumb.
2468 (print_insn_little_arm): Check force_thumb.
2470 For older changes see ChangeLog-9899
2476 version-control: never
projects / binutils-gdb.git / blob