opcodes/ChangeLog

   1 2009-11-17  Sebastian Pop  <sebastian.pop@amd.com>
   2             Quentin Neill  <quentin.neill@amd.com>
   3
   4         * i386-dis.c (OP_Vex_2src_1): New.
   5         (OP_Vex_2src_2): New.
   6         (Vex_2src_1): New.
   7         (Vex_2src_2): New.
   8         (XOP_08): Added.
   9         (VEX_LEN_XOP_08_A0): Added.
  10         (VEX_LEN_XOP_08_A1): Added.
  11         (VEX_LEN_XOP_09_80): Added.
  12         (VEX_LEN_XOP_09_81): Added.
  13         (xop_table): Added an entry for XOP_08.  Handle xop instructions.
  14         (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
  15         VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
  16         (get_valid_dis386): Handle XOP_08.
  17         (OP_Vex_2src): New.
  18         * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
  19         (cpu_flags): Add CpuXOP and CpuCVT16.
  20         (opcode_modifiers): Add XOP08, Vex2Sources.
  21         * i386-opc.h (CpuXOP): Added.
  22         (CpuCVT16): Added.
  23         (i386_cpu_flags): Add cpuxop and cpucvt16.
  24         (XOP08): Added.
  25         (Vex2Sources): Added.
  26         (i386_opcode_modifier): Add xop08, vex2sources.
  27         * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
  28         * i386-init.h: Regenerated.
  29         * i386-tbl.h: Regenerated.
  30
  31 2009-11-17  Nick Clifton  <nickc@redhat.com>
  32
  33         PR binutils/10924
  34         * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
  35         instruction variants.  Add pattern for MRS variant that was being
  36         confused with CMP.
  37         (arm_decode_shift): Place error message in a comment.
  38         (print_insn_arm): Note that writing back to the PC is
  39         unpredictable.
  40         Only print 'p' variants of cmp/cmn/teq/tst instructions if
  41         decoding for pre-V6 architectures.
  42
  43 2009-11-17  Edward Nevill <edward.nevill@arm.com>
  44
  45         * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
  46
  47 2009-11-14  Doug Evans  <dje@sebabeach.org>
  48
  49         * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
  50         ../cgen/cpu.
  51         * Makefile.in: Regenerate.
  52
  53 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
  54
  55         * i386-dis.c (OP_E_extended): Removed.
  56
  57 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
  58
  59         * i386-dis.c (print_insn): Check rex_ignored.
  60
  61 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
  62
  63         * i386-dis.c (ckprefix): Updated to return 0 if number of
  64         prefixes > 14 and record the last position for each prefix.
  65         (lock_prefix): Removed.
  66         (data_prefix): Likewise.
  67         (addr_prefix): Likewise.
  68         (repz_prefix): Likewise.
  69         (repnz_prefix): Likewise.
  70         (last_lock_prefix): New.
  71         (last_repz_prefix): Likewise.
  72         (last_repnz_prefix): Likewise.
  73         (last_data_prefix): Likewise.
  74         (last_addr_prefix): Likewise.
  75         (last_rex_prefix): Likewise.
  76         (last_seg_prefix): Likewise.
  77         (MAX_CODE_LENGTH): Likewise.
  78         (ADDR16_PREFIX): Likewise.
  79         (ADDR32_PREFIX): Likewise.
  80         (DATA16_PREFIX): Likewise.
  81         (DATA32_PREFIX): Likewise.
  82         (REP_PREFIX): Likewise.
  83         (seg_prefix): Likewise.
  84         (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
  85         (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
  86         DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
  87         (get_valid_dis386): Updated.
  88         (OP_C): Likewise.
  89         (OP_Monitor): Likewise.
  90         (REP_Fixup): Likewise.
  91         (print_insn): Display all prefixes.
  92         (putop): Set PREFIX_DATA on used_prefixes only if it is used.
  93         (intel_operand_size): Likewise.
  94         (OP_E_register): Likewise.
  95         (OP_G): Likewise.
  96         (OP_REG): Likewise.
  97         (OP_IMREG): Likewise.
  98         (OP_I): Likewise.
  99         (OP_I64): Likewise.
 100         (OP_sI): Likewise.
 101         (CRC32_Fixup): Likewise.
 102         (MOVBE_Fixup): Likewise.
 103         (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
 104         in 16bit mode.
 105         (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
 106         used_prefixes only if it is used.
 107
 108 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 109
 110         * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
 111         or, sbb, sub, xor and xchg with register only operands.
 112         * i386-tbl.h: Regenerated.
 113
 114 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 115
 116         * i386-gen.c (opcode_modifiers): Add IsLockable.
 117
 118         * i386-opc.h (IsLockable): New.
 119         (i386_opcode_modifier): Add islockable.
 120
 121         * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
 122         bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
 123         xor, xadd and xchg.
 124         * i386-tbl.h: Regenerated.
 125
 126 2009-11-12  Daniel Jacobowitz  <dan@codesourcery.com>
 127
 128         * arm-dis.c (coprocessor_opcodes): Use %A instead of %C.  Remove
 129         generic coprocessor instructions for FPA loads and stores.
 130         (print_insn_coprocessor): Remove %C support.  Display address for
 131         PC-relative offsets in %A.
 132
 133 2009-11-11  H.J. Lu  <hongjiu.lu@intel.com>
 134
 135         * i386-dis.c (all_prefixes): New.
 136         (ckprefix): Set all_prefixes.
 137         (print_insn): Print all_prefixes instead of lock_prefix,
 138         repz_prefix, repnz_prefix, addr_prefix and data_prefix.
 139
 140 2009-11-11  Nick Clifton  <nickc@redhat.com>
 141
 142         PR binutils/10924
 143         * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
 144         (print_insn_arm): Extend %s format control code to check for
 145         unpredictable addressing modes.  Add support for %S format control
 146         code which suppresses this check.
 147         (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
 148         (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
 149         PRE_BIT_SET): New macros.
 150         (print_insn_coprocessor): Use the new macros instead of magic
 151         constants.
 152         (print_arm_address): Likewise.
 153         (pirnt_insn_arm): Likewise.
 154         (print_insn_thumb32): Likewise.
 155
 156 2009-11-11  Nick Clifton  <nickc@redhat.com>
 157
 158         * po/id.po: Updated Indonesian translation.
 159
 160 2009-11-10  Maxim Kuvyrkov  <maxim@codesourcery.com>
 161
 162         * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
 163
 164 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
 165
 166         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
 167         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
 168         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
 169         the xop_table.
 170         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
 171         XOP instructions.
 172
 173 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
 174             Quentin Neill  <quentin.neill@amd.com>
 175
 176         * opcodes/i386-dis.c (OP_LWPCB_E): New.
 177         (OP_LWP_E): New.
 178         (OP_LWP_I): New.
 179         (USE_XOP_8F_TABLE): New.
 180         (XOP_8F_TABLE): New.
 181         (REG_XOP_LWPCB): New.
 182         (REG_XOP_LWP): New.
 183         (XOP_09): New.
 184         (XOP_0A): New.
 185         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
 186         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
 187         (xop_table): New.
 188         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
 189         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
 190         to access to the vex_table.
 191         (OP_LWPCB_E): New.
 192         (OP_LWP_E): New.
 193         (OP_LWP_I): New.
 194         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
 195         (cpu_flags): Add CpuLWP.
 196         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
 197         * opcodes/i386-opc.h (CpuLWP): New.
 198         (i386_cpu_flags): Add bit cpulwp.
 199         (VexLWP): New.
 200         (XOP09): New.
 201         (XOP0A): New.
 202         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
 203         * opcodes/i386-opc.tbl (llwpcb): Added.
 204         (lwpval): Added.
 205         (lwpins): Added.
 206
 207 2009-11-04  DJ Delorie  <dj@redhat.com>
 208
 209         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
 210         (mvtcp, mvfcp, opecp): Remove.
 211         * rx-decode.c: Regenerate.
 212         * rx-dis.c (cpen): Remove.
 213
 214 2009-11-03  Doug Evans  <dje@sebabeach.org>
 215
 216         * m32c-desc.c: Regenerate.
 217         * mep-desc.c: Regenerate.
 218
 219 2009-11-02  Paul Brook  <paul@codesourcery.com>
 220
 221         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
 222         Add VFPv4 instructions.
 223
 224 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
 225
 226         * i386-dis.c (OP_VEX_FMA): Removed.
 227         (VexFMA): Removed.
 228         (Vex128FMA): Removed.
 229         (prefix_table): First source operand of FMA4 insns is decoded
 230         with Vex not with VexFMA.
 231         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
 232         when vex.w is set.  Third source operand is decoded with
 233
 234 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
 235
 236         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
 237         * Makefile.in: Regenerate.
 238         * po/POTFILES.in: Regenerate.
 239
 240 2009-10-23  Doug Evans  <dje@sebabeach.org>
 241
 242         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
 243         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
 244         * cgen-bitset.c: Update.
 245         * fr30-desc.h: Regenerate.
 246         * frv-desc.h: Regenerate.
 247         * ip2k-desc.h: Regenerate.
 248         * iq2000-desc.h: Regenerate.
 249         * lm32-desc.h: Regenerate.
 250         * m32c-desc.h: Regenerate.
 251         * m32c-opc.h: Regenerate.
 252         * m32r-desc.h: Regenerate.
 253         * mep-desc.h: Regenerate.
 254         * mt-desc.h: Regenerate.
 255         * openrisc-desc.h: Regenerate.
 256         * xc16x-desc.h: Regenerate.
 257         * xstormy16-desc.h: Regenerate.
 258
 259 2009-10-22  DJ Delorie  <dj@redhat.com>
 260
 261         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
 262         * rx-decode.c: Regenerated.
 263
 264 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 265
 266         PR gas/10775
 267         * i386-dis.c: Document LB, LS and LV macros.
 268         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 269         with the 64-bit displacement or immediate operand.
 270         (putop): Handle LB, LS and LV macros.
 271
 272 2009-10-18  Doug Evans  <dje@sebabeach.org>
 273
 274         * lm32-opinst.c: Regenerate.
 275         * m32c-desc.c: Regenerate.
 276         * m32r-opinst.c: Regenerate.
 277         * openrisc-ibld.c: Regenerate.
 278         * xc16x-desc.c: Regenerate.
 279         * xc16x-desc.h: Regenerate.
 280
 281 2009-10-17  Doug Evans  <dje@sebabeach.org>
 282
 283         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 284         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 285         sorted alphabetically.
 286         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 287         stamp-* rules are sorted alphabetically.
 288         * Makefile.in: Regenerate.
 289
 290 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * i386-opc.h: Use enum instead of nested macros.
 293
 294 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 295
 296         * i386-dis.c: Simplify enums.
 297
 298 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 299             Ineiev <ineiev@gmail.com>
 300
 301         PR binutils/10767
 302         * i386-dis.c: Use enum instead of nested macros.
 303
 304 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 305
 306         * i386-dis.c (MAX_BYTEMODE): Removed.
 307
 308 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 309
 310         PR 969
 311         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 312
 313 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 314
 315         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 316         and vex_w_done.
 317
 318 2009-10-07  Michael Eager  <eager@eagercon.com>
 319
 320         * microblaze-dis.c: Add include for microblaze-dis.h,
 321         eliminate local extern decls.
 322         * microblaze-dis.h: New.
 323
 324 2009-10-06  Nick Clifton  <nickc@redhat.com>
 325
 326         * po/fi.po: Updated Finnish translation.
 327
 328 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 329
 330         * opc2c.c: Include "libiberty.h" and <errno.h>.
 331         (orig_filename): Constify.
 332         (dump_lines): Fix line number directive.
 333         (main): Set orig_filename to basename of input file.  Use
 334         xstrerror.
 335
 336         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 337         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 338         instead of $(EXEEXT).
 339         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 340         $(LINK_FOR_BUILD).  Link with libiberty.
 341         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 342         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 343         * Makefile.in: Regenerated.
 344         * rx-decode.c: Regenerated.
 345
 346 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 347
 348         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 349
 350 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 351
 352         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 353         * i386-tbl.h: Regenerated.
 354
 355 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 356
 357         * ppc-dis.c (ppc_opts): Add "476" entry.
 358         * ppc-opc.c (PPC476): Define.
 359         (powerpc_opcodes): Update mnemonics where required for 476.
 360
 361 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 362
 363         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 364         * ppc-dis.c (ppc_opts): Likewise.
 365         Rename "ppca2" to "a2".
 366
 367 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 368
 369         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 370
 371 2009-09-29  DJ Delorie  <dj@redhat.com>
 372
 373         * Makefile.am: Add RX files.
 374         * configure.in: Add support for RX target.
 375         * disassemble.c: Likewise.
 376         * Makefile.in: Regenerate.
 377         * configure: Regenerate.
 378         * opc2c.c: New file.
 379         * rx-decode.c: New file.
 380         * rx-decode.opc: New file.
 381         * rx-dis.c: New file.
 382
 383 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 384
 385         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 386         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 387
 388 2009-09-25  Michael Eager  <eager@eagercon.com>
 389
 390         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 391         microblaze_decode_insn): Add declarations.
 392         (get_delay_slots_microblaze): Remove.
 393
 394 2009-09-25  Martin Thuresson  <martint@google.com>
 395
 396         Update sources to make arc and arm targets compile cleanly with
 397         -Wc++-compat:
 398         * arc-dis.c Fix casts.
 399         * arc-ext.c: Add casts.
 400         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 401         enum.
 402
 403 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 404
 405         * i386-gen.c (opcode_modifiers): Remove Vex256.
 406         (set_bitfield): Handle XXX=V.
 407
 408         * i386-opc.h (Vex): Update comments.
 409         (Vex256): Removed.
 410         (VexNDS): Updated.
 411         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 412
 413         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 414         * i386-tbl.h: Regenerated.
 415
 416 2009-09-23  Nick Clifton  <nickc@redhat.com>
 417
 418         * po/fr.po: Updated French translation.
 419
 420 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 421             Peter Bergner  <bergner@vnet.ibm.com>
 422
 423         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 424         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 425         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 426         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 427         ici mnemonics.
 428         (ERAT_T): New operand.
 429         (XWC_MASK): New mask.
 430         (XOPL2): New macro.
 431         (PPCA2): Define.
 432
 433 2009-09-18  Nick Clifton  <nickc@redhat.com>
 434
 435         * po/es.po: Updated Spanish translation.
 436         * po/vi.po: Updated Vietnamese translation.
 437
 438 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 439
 440         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 441         disp == -disp.
 442
 443 2009-09-14  Nick Clifton  <nickc@redhat.com>
 444
 445         * po/nl.po: Updated Dutch translation.
 446
 447 2009-09-11  Nick Clifton  <nickc@redhat.com>
 448
 449         * po/opcodes.pot: Updated by the Translation project.
 450
 451 2009-09-11  Martin Thuresson  <martint@google.com>
 452
 453         Updated sources to compile cleanly with -Wc++-compat:
 454         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 455         * ldcref.c: Add casts.
 456         * ldctor.c: Add casts.
 457         * ldexp.c
 458         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 459         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 460         * ldlang.h (enum statement_enum): Move to top level.
 461         * ldmain.c: Add casts.
 462         * ldwrite.c: Add casts.
 463         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 464         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 465
 466 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 467
 468         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 469
 470 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 471
 472         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 473         (print_insn_s390): Signextend and shift pcrel operands before printing.
 474
 475 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 476
 477         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 478         VEX_LEN_AE_R_X_M_0 in comments.
 479
 480 2009-09-08  DJ Delorie  <dj@redhat.com>
 481
 482         * mep-opc.c: Regenerate.
 483
 484 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 485
 486         * z8kgen.c (struct op): Replace unused flavor with id.
 487         (opt): Remove extra xorb entry.
 488         (func): Use id field as fallback.
 489         (sub): Return new string, caller changed.
 490         (internal): Allocate end marker.  Assign unique id before sorting.
 491         (gas): Likewise.  Fix loop end condition.
 492         * z8k-opc.h: Regenerate.
 493
 494 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 495
 496         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 497
 498 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 499
 500         * z8kgen.c (func): Fix thinko last patch.
 501
 502 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 503
 504         * z8kgen.c (func): Stabilize qsort of identically named entries.
 505         * z8k-opc.h: Regenerate.
 506
 507 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 508
 509         * po/opcodes.pot: Regenerate.
 510
 511 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 512
 513         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 514         * configure: Regenerate.
 515         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 516         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 517         (i386-gen, ia64-gen, z8kgen): ..here.
 518         * Makefile.in: Regenerate.
 519
 520 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 521
 522         * z8k-opc.h: Regenerate.
 523
 524 2009-09-05  Martin Thuresson  <martin@mtme.org>
 525
 526         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 527         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 528         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 529         Rename argument class to symbol_class.
 530
 531 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 532
 533         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 534         to the new encoding of DBGA, DBGAH, and DBGAL.
 535         (_print_insn_bfin): Likewise.
 536
 537 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 538
 539         * bfin-dis.c (_print_insn_bfin): Don't declare.
 540         (print_insn_bfin): Don't declare.
 541         (dregs_pair): Remove.
 542         (ignore_bits): Remove.
 543         (ccstat): Remove.
 544
 545 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 546
 547         * bfin-dis.c (IS_DREG): Define.
 548         (IS_PREG): Define.
 549         (IS_AREG): Define.
 550         (IS_GENREG): Define.
 551         (IS_DAGREG): Define.
 552         (IS_SYSREG): Define.
 553         (decode_REGMV_0): Check illegal register move instructions.
 554
 555 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 556
 557         * Makefile.am (BUILD_LIBINTL): New variable.
 558         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 559         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 560         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 561         * Makefile.in: Regenerate.
 562
 563 2009-09-01  DJ Delorie  <dj@redhat.com>
 564
 565         * mep-asm.c: Regenerate.
 566         * mep-desc.c: Regenerate.
 567         * mep-opc.c: Regenerate.
 568
 569 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 570
 571         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 572         dependencies.  Remove unused FORMAT variable.
 573         * configure.com: New file to create build.com DCL script for
 574         Itanium VMS or Alpha VMS.
 575
 576 2009-08-29  Martin Thuresson  <martin@mtme.org>
 577
 578         * cris-dis.c (bytes_to_skip): Update code to use new name.
 579         * i386-dis.c (putop): Update code to use new name.
 580         * i386-gen.c (process_i386_opcodes): Update code to use
 581         new name.
 582         * i386-opc.h (struct template): Rename struct template to
 583         insn_template. Update code accordingly.
 584         * i386-tbl.h (i386_optab): Update type to use new name.
 585         * ia64-dis.c (print_insn_ia64): Rename variable template
 586         to template_val.
 587         * tic30-dis.c (struct instruction, get_tic30_instruction):
 588         Update code to use new name.
 589         * tic54x-dis.c (has_lkaddr, get_insn_size)
 590         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 591         Update code to use new name.
 592         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 593         Update type to new name.
 594         * z8kgen.c (internal, gas): Rename variable new to new_op.
 595
 596 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 597
 598         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 599         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 600         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 601         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 602         * Makefile.in: Regenerated.
 603
 604 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 605
 606         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 607         [INSTALL_LIBBFD]: ... here, ...
 608         [INSTALL_LIBBFD]: ... and empty overrides here.
 609         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 610         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 611         * Makefile.in: Regenerate.
 612         * configure: Regenerate.
 613
 614 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 615
 616         * m68k-dis.c (print_insn_arg): Add movecr register names for
 617         coldfire v4e families.
 618
 619 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 620
 621         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 622         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 623         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 624         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 625         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 626         (i386-gen.o): New rule.
 627         ($(srcdir)/i386-init.h): Adjust.
 628         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 629         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 630         (ia64-gen.o): New rule.
 631         (ia64_asmtab_deps): New variable.
 632         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 633         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 634         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 635         likewise.
 636         (s390-opc.tab): Adjust.
 637         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 638         rules.
 639         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 640         * Makefile.in: Regenerate.
 641         * z8kgen.c (gas): Avoid '/*' in comment.
 642         * z8k-opc.h (func): Regenerate.
 643
 644 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 645
 646         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 647         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 648         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 649         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 650         msp430-dis.c added.
 651         (LIBOPCODES_CFILES): New variable, adding to
 652         TARGET_LIBOPCODES_CFILES also non-target library sources.
 653         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 654         files.
 655         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 656         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 657         * Makefile.in: Regenerate.
 658         * po/POTFILES.in: Regenerate.
 659
 660 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 661
 662         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 663         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 664         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 665         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 666         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 667         is built shared even if it is not to be installed.
 668         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 669         (install_libopcodes, uninstall_libopcodes): Remove.
 670         (AM_CPPFLAGS): Renamed from ...
 671         (INCLUDES): ... this.
 672         * Makefile.in: Regenerate.
 673
 674         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 675         1.11, foreign, no-dist.
 676         (MKDEP, m32c_opc_h): Remove variables.
 677         (disassemble.lo): Rewrite using automake-style dependency
 678         tracking rules; only list the dependency upon the primary source
 679         file, but no included headers.
 680         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 681         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 682         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 683         ensure all dependency fragments are included in the Makefile.
 684         (s390-opc.lo): Depend on s390-opc.tab.
 685         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 686         (mkdep section): Remove.
 687         * Makefile.in: Regenerate.
 688         * po/POTFILES.in: Regenerate.
 689
 690         * Makefile.am (install-pdf, install-html): Remove.
 691         * Makefile.in: Regenerate.
 692
 693         * Makefile.in: Regenerate.
 694         * aclocal.m4: Likewise.
 695         * config.in: Likewise.
 696         * configure: Likewise.
 697
 698 2009-08-06  Michael Eager <eager@eagercon.com>
 699
 700         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 701         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 702         * Makefile.in: Regenerate.
 703         * configure.in: Add bfd_microblaze_arch target.
 704         * configure: Regenerate.
 705         * disassemble.c: Define ARCH_microblaze, return
 706         print_insn_microblaze().
 707         * microblaze-dis.c: New MicroBlaze disassembler.
 708         * microblaze-opc.h: New MicroBlaze opcode definitions.
 709         * microblaze-opcm.h: New MicroBlaze opcode types.
 710
 711 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 712
 713         * configure.in: Handle bfd_l1om_arch.
 714         * disassemble.c (disassembler): Likewise.
 715
 716         * configure: Regenerated.
 717
 718         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 719         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 720
 721         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 722         Add CPU_L1OM_FLAGS.
 723         (cpu_flags): Add CpuL1OM.
 724         (set_bitfield): Take an argument to set the value field.
 725         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 726         (process_i386_opcode_modifier): Updated.
 727         (process_i386_operand_type): Likewise.
 728         * i386-init.h: Regenerated.
 729         * i386-tbl.h: Likewise.
 730
 731         * i386-opc.h (CpuL1OM): New.
 732         (CpuXsave): Updated.
 733         (i386_cpu_flags): Add cpul1om.
 734
 735 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 736
 737         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 738         frstpm.
 739         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 740         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 741         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 742         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 743         Define.
 744         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 745         and cpufisttp.
 746         * i386-opc.tbl: Qualify floating point instructions by their
 747         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 748         and fsincos to be avilable only on 387. Fix fstsw ax to be
 749         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 750         and frstpm.
 751         * i386-init.h, i386-tbl.h: Regenerate.
 752
 753 2009-07-20  Nick Clifton  <nickc@redhat.com>
 754
 755         PR 10288
 756         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 757         offset or indexed based addressing mode 3.
 758
 759 2009-07-14  Nick Clifton  <nickc@redhat.com>
 760
 761         PR 10288
 762         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 763         patterns.
 764         (arm_decode_shift): Catch illegal register based shifts.
 765         (print_insn_arm): Properly handle negative register r0
 766         post-indexed addressing.
 767
 768 2009-07-10  Doug Kwan  <dougkwan@google.com>
 769
 770         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 771         lower 32 bits of long types to make hexadecimal output consistent
 772         on both 32-bit and 64-bit hosts.
 773
 774 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 775
 776         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 777         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 778         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 779         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 780         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 781         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 782         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 783         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 784         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 785         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 786         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 787         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 788
 789 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 790
 791         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 792
 793 2009-07-07  Nick Clifton  <nickc@redhat.com>
 794
 795         PR 10288
 796         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 797         addressing modes.
 798
 799 2009-07-06  DJ Delorie  <dj@redhat.com>
 800
 801         * mep-desc.c: Regenerate.
 802         * mep-desc.h: Regenerate.
 803         * mep-opc.c: Regenerate.
 804         * mep-opc.h: Regenerate.
 805
 806 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 807
 808         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 809         (i386_cpu_flags): New.
 810         * i386-gen.c: Add CPU_FMA4_FLAGS.
 811         * i386-opc.tbl: Add FMA4 instructions.
 812         * i386-tbl.h: Regenerate.
 813         * i386-init.h: Regenerate.
 814         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 815         (OP_XMM_VexW): Ditto.
 816         (OP_EX_VexW): Ditto.
 817         (VEXI4_Fixup): Ditto.
 818         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 819         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 820         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 821         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 822         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 823         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 824         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 825         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 826         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 827         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 828         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 829         (get_vex_imm8): New. handle FMA4.
 830         (OP_EX_VexReg): Ditto.
 831
 832 2009-06-30  Nick Clifton  <nickc@redhat.com>
 833
 834         PR 10288
 835         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 836         LFM and SFM instructions as comments,.
 837         Improve consistency of formatting for instructions displayed as
 838         comments and decimal values displayed with their hexadecimal
 839         equivalents.
 840         Formatting tidy ups.
 841
 842 2009-06-29  Nick Clifton  <nickc@redhat.com>
 843
 844         PR 10288
 845         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 846         boundary between variaant and generic coprocessor instuctions.
 847         (coprocessor): Use it.
 848         Fix architecture version of MCRR and MRRC instructions.
 849         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 850         (print_insn_coprocessor): Check architecture and extension masks.
 851         Print a hexadecimal version of any decimal constant that is
 852         outside of the range of -16 to +32.
 853         (print_arm_address): Add a return value of the offset used in the
 854         adress, if it is worth printing a hexadecimal version of it.
 855         (print_insn_neon): Print a hexadecimal version of any decimal
 856         constant that is outside of the range of -16 to +32.
 857         (print_insn_arm): Likewise.
 858         (print_insn_thumb16): Likewise.
 859         (print_insn_thumb32): Likewise.
 860
 861         PR 10297
 862         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 863         of an undefined instruction.
 864         (arm_opcodes): Use it.
 865         (thumb_opcod): Use it.
 866         (thumb32_opc): Use it.
 867
 868 2009-06-23  DJ Delorie  <dj@redhat.com>
 869
 870         * mep-desc.c: Regenerate.
 871         * mep-desc.h: Regenerate.
 872         * mep-dis.c: Regenerate.
 873         * mep-ibld.c: Regenerate.
 874         * mep-opc.c: Regenerate.
 875
 876         * mep-asm.c: Regenerate.
 877         * mep-opc.c: Regenerate.
 878         * mep-opc.h: Regenerate.
 879
 880 2009-06-22  Nick Clifton  <nickc@redhat.com>
 881
 882         * po/fi.po: Updated Finish translation.
 883
 884 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 885
 886         * m32c-asm.c: Regenerate.
 887
 888 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 889
 890         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 891         case label to proper lexical block.
 892         * score7-dis.c (print_insn_score32): Likewise.
 893
 894 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 895
 896         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 897         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 898         * s390-opc.txt (nopr, nop): Use new instruction format.
 899
 900 2009-06-18  Nick Clifton  <nickc@redhat.com>
 901
 902         PR 10288
 903         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 904         ARM architecture supports the matched instruction.
 905         (print_insn_arm): Likewise.
 906         (select_arm_features): New function.  Fills in the fields of an
 907         arm_feature_set structure based on a given arm machine number.
 908         (print_insn): Initialise an arm_feature_set structure.
 909
 910 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 911
 912         * vax-dis.c (is_function_entry): Return success for synthetic
 913         symbols too.
 914         (is_plt_tail): New function.
 915         (print_insn_vax): Decode PLT entry offset longword.
 916
 917 2009-06-15  Nick Clifton  <nickc@redhat.com>
 918
 919         PR 10186
 920         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 921         instruction.
 922
 923         PR 10173
 924         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 925
 926 2009-06-15  Nick Clifton  <nickc@redhat.com>
 927
 928         PR 10263
 929         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 930         the disassembly of data as well as instructions.
 931
 932 2009-06-11  Doug Evans  <dje@sebabeach.org>
 933
 934         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 935
 936 2009-06-11  Anthony Green  <green@moxielogic.com>
 937
 938         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 939         (moxie_form3_opc_info): Add branch instructions.
 940         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 941         encoded instructions.
 942
 943 2009-06-06  Anthony Green  <green@moxielogic.com>
 944
 945         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 946         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 947
 948 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 949
 950         * dep-in.sed: Don't use \n in replacement part of s command.
 951         * Makefile.am (DEP1): LC_ALL for uniq.
 952         * Makefile.in: Regenerate.
 953
 954 2009-06-02  Nick Clifton  <nickc@redhat.com>
 955
 956         * po/nl.po: Updated Dutch translation.
 957
 958 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 959
 960         * ia64-gen.c (parse_resource_users, print_dependency_table,
 961         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 962         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 963         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 964         insert_completer_entry, print_completer_entry, print_completer_table,
 965         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 966
 967 2009-05-28  DJ Delorie  <dj@redhat.com>
 968
 969         * mep-asm.c: Regenerate.
 970         * mep-desc.c: Regenerate.
 971
 972 2009-05-26  DJ Delorie  <dj@redhat.com>
 973
 974         * mep-asm.c: Regenerate.
 975         * mep-desc.c: Regenerate.
 976         * mep-desc.h: Regenerate.
 977         * mep-dis.c: Regenerate.
 978         * mep-ibld.c: Regenerate.
 979         * mep-opc.c: Regenerate.
 980         * mep-opc.h: Regenerate.
 981
 982 2009-05-26  Nick Clifton  <nickc@redhat.com>
 983
 984         * po/id.po: Updated Indonesian translation.
 985         * po/opcodes.pot: Updated template file.
 986
 987 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 988
 989         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 990         per line with all lines having continuation backslash.  Prefix
 991         first line with "A", following lines with "B".
 992         * Makefile.am (DEP): Don't use dep.sed here.
 993         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 994         dep.sed here on dependencies, sort and uniq.
 995         * Makefile.in: Regenerate.
 996
 997 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 998
 999         * makefile.vms (OPT): New variable.
1000         (CFLAGS): Update compilation flags.
1001
1002 2009-05-22  DJ Delorie  <dj@redhat.com>
1003
1004         * mep-asm.c: Regenerate.
1005         * mep-desc.c: Regenerate.
1006         * mep-desc.h: Regenerate.
1007         * mep-dis.c: Regenerate.
1008         * mep-ibld.c: Regenerate.
1009         * mep-opc.c: Regenerate.
1010         * mep-opc.h: Regenerate.
1011
1012 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
1013
1014         * i386-opc.h (Cpusse5): Delete.
1015         (i386_cpu_flags): Delete.
1016         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1017         * i386-opc.tbl: Remove SSE5 instructions.
1018         * i386-tbl.h: Regenerate.
1019         * i386-init.h: Regenerate.
1020         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1021         (print_drex_arg): Delete.
1022         (OP_DREX4): Delete.
1023         (OP_DREX3): Delete.
1024         (OP_DREX_ICMP): Delete.
1025         (OP_DREX_FCMP): Delete.
1026         (DREX_*): Delete.
1027         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1028
1029 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
1030
1031         * Makefile.am: Run "make dep-am".
1032         * Makefile.in: Regenerate.
1033         * po/POTFILES.in: Regenerate.
1034
1035 2009-05-19  DJ Delorie  <dj@redhat.com>
1036
1037         * mep-asm.c: Regenerate.
1038         * mep-opc.c: Regenerate.
1039
1040 2009-04-30  DJ Delorie  <dj@redhat.com>
1041
1042         * mep-asm.c: Regenerate.
1043         * mep-desc.c: Regenerate.
1044         * mep-desc.h: Regenerate.
1045         * mep-dis.c: Regenerate.
1046         * mep-ibld.c: Regenerate.
1047         * mep-opc.c: Regenerate.
1048         * mep-opc.h: Regenerate.
1049
1050 2009-04-17  DJ Delorie  <dj@redhat.com
1051
1052         * mep-desc.c: Regenerate.
1053         * mep-ibld.c: Regenerate.
1054         * mep-opc.c: Regenerate.
1055         * mep-opc.h: Regenerate.
1056
1057 2009-04-15  Anthony Green  <green@moxielogic.com>
1058
1059         * moxie-opc.c, moxie-dis.c: Created.
1060         * Makefile.am: Build the moxie source files.
1061         * configure.in: Add moxie support.
1062         * Makefile.in, configure: Rebuilt.
1063         * disassemble.c (disassembler): Add moxie support.
1064         (ARCH_moxie): Define.
1065
1066 2009-04-15  Jan Beulich  <jbeulich@novell.com>
1067
1068         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1069         extension to None.
1070         (pshab, pshaw, pshad, pshaq): Likewise.
1071         * i386-tbl.h: Re-generate.
1072
1073 2009-04-08  DJ Delorie  <dj@redhat.com
1074
1075         * mep-asm.c: Regenerate.
1076         * mep-desc.c: Regenerate.
1077         * mep-desc.h: Regenerate.
1078         * mep-dis.c: Regenerate.
1079         * mep-ibld.c: Regenerate.
1080         * mep-opc.c: Regenerate.
1081         * mep-opc.h: Regenerate.
1082
1083 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
1084
1085         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1086         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1087         Reorder entries so the extended mnemonics are listed before tlbilx.
1088
1089 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
1090
1091         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1092         due to -many/-Many.
1093         (print_insn_powerpc): Make sure we only deprecate instructions using
1094         the original dialect and not a modified dialect due to -Many handling.
1095         Move the handling of the condition register and default operands to
1096         the end of the if/else if/else chain.
1097         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1098         instructions from newer processors are listed before older ones.
1099         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1100         that have instructions with conflicting opcodes.
1101
1102 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
1103
1104         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1105         E500MC entries.
1106
1107 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
1108
1109         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1110
1111 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
1112
1113         * arm-dis.c (print_insn): Also check section matches in backwards
1114         search for mapping symbol.
1115
1116 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
1117
1118         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1119
1120 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
1121
1122         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1123         * Makefile.am: Run "make dep-am".
1124         * Makefile.in: Regenerate.
1125         * openrisc-opc.c: Regenerate.
1126
1127 2009-03-10  Nick Clifton  <nickc@redhat.com>
1128
1129         * po/id.po: Updated Indonesian translation.
1130
1131 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
1132
1133         * ppc-dis.c: Include "opintl.h".
1134         (struct ppc_mopt, ppc_opts): New.
1135         (ppc_parse_cpu): New function.
1136         (powerpc_init_dialect): Use it.
1137         (print_ppc_disassembler_options): Dump options from ppc_opts.
1138         Internationalize message.
1139
1140 2009-03-06  Nick Clifton  <nickc@redhat.com>
1141
1142         * po/es.po: Updated Spanish translation.
1143
1144 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
1145
1146         PR 6768
1147         * configure.in: Test for ld --as-needed support.  Link shared
1148         libopcodes against libm.
1149         * configure: Regenerate.
1150
1151 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
1152
1153         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1154         instructions from newer processors are listed before older ones.
1155
1156 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
1157
1158         * Makefile.am: Run "make dep-am".
1159         (HFILES): Move lm32-desc.h and lm32-opc.h from..
1160         (CFILES): ..here.
1161         * Makefile.in: Regenerate.
1162
1163 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1164
1165         * score7-dis.c: New file.
1166         * Makefile.am: Add dependencies for score7-dis.c.
1167         * Makefile.in: Regenerate.
1168         * configure.in: Add score7-dis to score files.
1169         * configure: Regenerate.
1170         * score-dis.c: Add support for score7 architecture.
1171         * score-opc.h: Likewise.
1172
1173 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1174
1175         * configure: Regenerate.
1176
1177 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1178
1179         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1180
1181 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1182
1183         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1184         the power7 and the isel instructions.
1185         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1186         (insert_dm, extract_dm): Likewise.
1187         (XB6): Update comment to include XX2 form.
1188         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1189         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1190         (RemoveXX3DM): Delete.
1191         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1192         "mftgpr">: Deprecate for POWER7.
1193         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1194         "frsqrte.">: Deprecate the three operand form and enable the two
1195         operand form for POWER7 and later.
1196         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1197         <"waitsrv", "waitimpl">: Add extended opcodes.
1198         <"ldbrx", "stdbrx">: Enable for POWER7.
1199         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1200         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1201         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1202         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1203         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1204         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1205         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1206         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1207         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1208         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1209         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1210         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1211         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1212         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1213         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1214         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1215         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1216         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1217         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1218         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1219         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1220         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1221         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1222         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1223         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1224         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1225         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1226         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1227         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1228         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1229         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1230         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1231         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1232         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1233         "xxspltw", "xxswapd">: Add VSX opcodes.
1234
1235 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1236
1237         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1238         (operand_types): Remove Vex_Imm4.
1239
1240         * i386-opc.h (Vex_Imm4): Removed.
1241         (OTMax): Updated.
1242         (i386_operand_type): Remove vex_imm4.
1243
1244         * i386-opc.tbl: Remove Vex_Imm4 comments.
1245         * i386-init.h: Regenerated.
1246         * i386-tbl.h: Likewise.
1247
1248 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1249
1250         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1251         vq{r}shr{u}n.s64 insnstructions.
1252
1253 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1254
1255         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1256         operand to be a float point register (FRT/FRS).
1257
1258 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1259
1260         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1261         dmfc2 and dmtc2 before the architecture-level variants.
1262
1263 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1264
1265         * fr30-opc.c: Regenerate.
1266         * frv-opc.c: Regenerate.
1267         * ip2k-opc.c: Regenerate.
1268         * iq2000-opc.c: Regenerate.
1269         * lm32-opc.c: Regenerate.
1270         * m32c-opc.c: Regenerate.
1271         * m32r-opc.c: Regenerate.
1272         * mep-opc.c: Regenerate.
1273         * mt-opc.c: Regenerate.
1274         * xc16x-opc.c: Regenerate.
1275         * xstormy16-opc.c: Regenerate.
1276         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1277         sprintf call.
1278
1279 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1280
1281         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1282
1283 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1284
1285         * ppc-opc.c: Update copyright year.
1286         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1287         ordering for POWER4 and later and use the correct Server ordering.
1288
1289 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1290
1291         AVX Programming Reference (January, 2009)
1292         * i386-dis.c (PREFIX_VEX_3A44): New.
1293         (VEX_LEN_3A44_P_2): Likewise.
1294         (PREFIX_VEX_3A48): Updated.
1295         (VEX_LEN_3A4C_P_2): Likewise.
1296         (prefix_table): Add PREFIX_VEX_3A44.
1297         (vex_table): Likewise.
1298         (vex_len_table): Add VEX_LEN_3A44_P_2.
1299
1300         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1301         * i386-tbl.h: Regenerated.
1302
1303 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1304
1305         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1306         (mips_arch_choices): Add XLR entry.
1307         * mips-opc.c (XLR): Define.
1308         (mips_builtin_opcodes): Add XLR instructions.
1309
1310 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1311
1312         * Makefile.am: Add install-pdf target.
1313         * po/Make-in: Add install-pdf target.
1314         * Makefile.in: Regenerate.
1315
1316 2009-02-02  DJ Delorie  <dj@redhat.com>
1317
1318         * mep-asm.c: Regenerate.
1319         * mep-desc.c: Regenerate.
1320         * mep-desc.h: Regenerate.
1321         * mep-dis.c: Regenerate.
1322         * mep-ibld.c: Regenerate.
1323         * mep-opc.c: Regenerate.
1324         * mep-opc.h: Regenerate.
1325
1326 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1327
1328         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1329         qsub, and qdsub.
1330
1331 2009-01-28  Chao-ying Fu  <fu@mips.com>
1332
1333         * mips-opc.c (suxc1): Add the flag of FP_D.
1334
1335 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1336
1337         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1338         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1339         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1340         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1341         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1342         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1343         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1344         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1345
1346 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1347
1348         * configure.in (commonbfdlib): Delete.
1349         (SHARED_LIBADD): Add pic libiberty if such is available.
1350         * configure: Regenerate.
1351         * po/POTFILES.in: Regenerate.
1352
1353 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1354
1355         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1356         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1357         operand form and enable the four operand form for POWER6 and later.
1358         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1359         three operand form for POWER6 and later.
1360
1361 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1362
1363         * bfin-dis.c (OUTS): Use "%s" as format string.
1364
1365 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1366
1367         * i386-gen.c (cpu_flag_init): Remove a white space.
1368         (operand_type_init): Likewise.
1369
1370 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1371
1372         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1373         * i386-tbl.h: Regenerated.
1374
1375 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1376
1377         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1378         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1379         subS, xorS and cmpS.
1380
1381 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1382
1383         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1384         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1385         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1386         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1387         and CpuSYSCALL.
1388         (lineno): Removed.
1389         (set_bitfield): Take an argument, lineno.  Don't report lineno
1390         on error if it is -1.
1391         (process_i386_cpu_flag): Take an argument, lineno.
1392         (process_i386_opcode_modifier): Likewise.
1393         (process_i386_operand_type): Likewise.
1394         (output_i386_opcode): Likewise.
1395         (opcode_hash_entry): Add lineno.
1396         (process_i386_opcodes): Updated.
1397         (process_i386_registers): Likewise.
1398         (process_i386_initializers): Likewise.
1399
1400         * i386-opc.h (CpuP4): Removed.
1401         (CpuK6): Likewise.
1402         (CpuK8): Likewise.
1403         (CpuClflush): New.
1404         (CpuSYSCALL): Likewise.
1405         (CpuMMX): Updated.
1406         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1407         cpuclflush and cpusyscall.
1408
1409         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1410         syscall and sysret.
1411         * i386-init.h: Regenerated.
1412         * i386-tbl.h: Likewise.
1413
1414 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1415
1416         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1417         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1418         (cpu_flags): Add CpuRdtscp.
1419         (set_bitfield): Remove CpuSledgehammer check.
1420
1421         * i386-opc.h (CpuRdtscp): New.
1422         (CpuLM): Updated.
1423         (i386_cpu_flags): Add cpurdtscp.
1424
1425         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1426         * i386-init.h: Regenerated.
1427         * i386-tbl.h: Likewise.
1428
1429 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1430
1431         * ppc-opc.c (PPCNONE): Define.
1432         (NOPOWER4): Delete.
1433         (powerpc_opcodes): Initialize the new "deprecated" field.
1434
1435 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1436
1437         AVX Programming Reference (December, 2008)
1438         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1439         (VEX_LEN_E7_P_2_M_0): Likewise.
1440         (VEX_LEN_2C_P_1): Updated.
1441         (VEX_LEN_E8_P_2): Likewise.
1442         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1443         (mod_table): Likewise.
1444
1445         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1446         * i386-tbl.h: Regenerated.
1447
1448 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1449
1450         * i386-gen.c (process_copyright): Update for 2009.
1451
1452         * i386-init.h: Regenerated.
1453         * i386-tbl.h: Likewise.
1454
1455 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1456
1457         AVX Programming Reference (December, 2008)
1458         * i386-dis.c (OP_VEX_FMA): Removed.
1459         (OP_EX_VexW): Likewise.
1460         (OP_EX_VexImmW): Likewise.
1461         (OP_XMM_VexW): Likewise.
1462         (VEXI4_Fixup): Likewise.
1463         (VPERMIL2_Fixup): Likewise.
1464         (VexI4): Likewise.
1465         (VexFMA): Likewise.
1466         (Vex128FMA): Likewise.
1467         (EXVexW): Likewise.
1468         (EXdVexW): Likewise.
1469         (EXqVexW): Likewise.
1470         (EXVexImmW): Likewise.
1471         (XMVexW): Likewise.
1472         (VPERMIL2): Likewise.
1473         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1474         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1475         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1476         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1477         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1478         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1479         (get_vex_imm8): Likewise.
1480         (OP_EX_VexReg): Likewise.
1481         vpermil2_op): Likewise.
1482         (EXVexWdq): New.
1483         (vex_w_dq_mode): Likewise.
1484         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1485         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1486         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1487         (es_reg): Updated.
1488         (PREFIX_VEX_38DB): Likewise.
1489         (PREFIX_VEX_3A4A): Likewise.
1490         (PREFIX_VEX_3A60): Likewise.
1491         (PREFIX_VEX_3ADF): Likewise.
1492         (VEX_LEN_3ADF_P_2): Likewise.
1493         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1494         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1495         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1496         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1497         PREFIX_VEX_3896...PREFIX_VEX_389F,
1498         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1499         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1500         (vex_table): Likewise.
1501         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1502         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1503         (putop): Support "%XW".
1504         (intel_operand_size): Handle vex_w_dq_mode.
1505
1506         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1507
1508         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1509         instructions.  Add new FMA instructions.
1510         * i386-tbl.h: Regenerated.
1511
1512 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1513
1514         * or32-opc.c (or32_print_register, or32_print_immediate,
1515         disassemble_insn): Don't rely on undefined sprintf behaviour.
1516
1517 For older changes see ChangeLog-2008
1518 \f
1519 Local Variables:
1520 mode: change-log
1521 left-margin: 8
1522 fill-column: 74
1523 version-control: never
1524 End: