2 Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
4 * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
5 * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
6 (extract_ffstreg): Fix calculation of reg part of returned value.
8 Thu Nov 19 16:38:16 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
10 * mips-opc.c (sync*): Flag these instructions with INSN_SYNC.
12 Wed Jul 29 09:41:19 1998 Frank Ch. Eigler <fche@cygnus.com>
14 * dvp-opc.c (vu_lower_opcodes): Allow ISW, ISWR, MFIR instructions
15 to take multiple destination (xyzw) flags.
17 Thu Jul 23 18:26:49 1998 Frank Ch. Eigler <fche@cygnus.com>
19 * dvp-opc.c (vu_operands): Add UW operand type to force ".w" suffix
20 on ft operand of CLIP.
21 (insert_w): New function for same.
22 (vu_opcodes): Use "broadcast" style argument list for two-operand
23 CLIP insn. Call UW constraint above.
25 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
27 * dvp-dis.c (print_insn): Disassemble DVP_OPERAND_RELOC_11_S4 as
31 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
33 * dis-buf.c (generic_strcat_address): reformat to GNU coding
34 conventions. change sprintf call to an sprintf_vma call.
37 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
39 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
42 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
44 The following changes were made by
45 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
46 David Taylor <taylor@texas.cygnus.com>, and
47 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
48 merge in changes by HP; HP did not create ChangeLog entries.
50 * dis-buf.c (generic_strcat_address): new function.
52 * hppa-dis.c: Changes to improve hppa disassembly.
53 Changed formatting in : reg_names, fp_reg_names,control_reg,
54 New variables : sign_extension_names, deposit_names, conversion_names
55 float_test_names, compare_cond_names_double, add_cond_names_double,
56 logical_cond_names_double, unit_cond_names_double,
57 branch_push_pop_names, saturation_names, shift_names, mix_names,
58 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
59 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
60 (fput_const): renamed as fput_hex_const
62 - use the macros fputs_filtered and
63 fput_decimal_const whenever possible; calls to sign_extend require
64 2 params -- add a missing second param of 0.
65 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
66 architecture version number of current machine. HP folks are
67 trying to handle situation where the target program was compiled
68 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
70 - added new cases : 'g', 'B', 'm'
71 - added cases specifically for PA 2.0
72 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
73 - calls to fput_const become calls to fput_hex_const
75 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
77 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
78 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
80 (CLEANFILES): Add stamp-i960.
82 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
85 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
86 * Makefile.in: Rebuilt.
87 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
89 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
90 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
93 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
95 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
98 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
100 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
102 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
103 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
106 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
108 * fr30-opc.c: Regenerate.
110 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
112 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
114 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
116 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
118 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
120 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
123 1998-11-30 Doug Evans <devans@casey.cygnus.com>
125 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
126 CGEN_INSN_BASE_VALUE.
127 start-sanitize-cygnus
128 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
129 New args word_offset, word_length. Rewrite.
131 (insert_1): Fix lsb0 case.
132 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
133 New args word_offset, word_length. Rewrite.
135 (extract_1): Fix lsb0 case.
136 * cgen-opc.in (FLD): Define.
138 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
140 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
143 start-sanitize-cygnus
144 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
146 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
147 * Makefile.in: Rebuild.
151 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
153 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
155 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
157 * fr30-asm.c,fr30-dis.c: Regenerated.
159 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
161 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
163 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
165 * fr30-opc.c: Regenerated.
167 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
169 * fr30-opc.c: Regenerated.
170 * fr30-opc.h: Regenerated.
171 * fr30-dis.c: Regenerated.
172 * fr30-asm.c: Regenerated.
175 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
177 * mips-opc.c (sync.p,sync.l): Swap insn values.
180 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
182 * fr30-opc.c: Regenerate.
184 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
186 * fr30-opc.c: Regenerated.
187 * fr30-opc.h: Regenerated.
190 1998-11-18 Doug Evans <devans@casey.cygnus.com>
192 start-sanitize-cygnus
193 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
194 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
196 (insert_insn_normal): Fix typo.
197 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
198 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
199 Rewrite ! CGEN_INT_INSN_P case.
200 (extract_insn_normal): Ditto.
201 (extract_1): New arg `pc'. All callers updated.
202 Replace calls to bfd_getb8.
203 (fill_cache): New fn.
204 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
205 * cgen-opc.in: ... from here.
206 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
208 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
210 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
214 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
216 * fr30-opc.c: Regenerated.
218 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
220 * fr30-opc.c: Regenerated.
221 * fr30-opc.h: Regenerated.
222 * fr30-dis.c: Regenerated.
223 * fr30-asm.c: Regenerated.
225 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
227 * po/opcodes.pot: Regenerated.
228 * fr30-opc.c: Regenerated.
229 * fr30-opc.h: Regenerated.
230 * fr30-dis.c: Regenerated.
231 * fr30-asm.c: Regenerated.
233 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
235 * disassemble.c (disassembler): Add support for FR30 target.
238 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
240 start-sanitize-cygnus
241 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
242 CGEN_OPERAND_SEM_ONLY.
244 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
246 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
248 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
250 * po/opcodes.pot: Regenerate.
251 * po/POTFILES.in: Regenerate.
252 * fr30-opc.c: Regenerate.
253 * fr30-opc.h: Regenerate.
255 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
257 * m32r-asm.c: Regenerate.
260 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
262 * configure.in: Added case for bfd_fr30_arch.
263 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
264 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
265 (CLEANFILES): Added stamp-fr30.
267 * fr30-asm.c: New file.
268 * fr30-dis.c: New file.
269 * fr30-opc.c: New file.
270 * fr30-opc.h: New file.
271 * po/POTFILES.in: Regenerated
272 * po/opcodes.pot: Regenerated
276 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
278 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
279 to bcl8,bncl8 entries.
280 (macro_insn_table_entries): Add FILL_SLOT attribute
281 to bcl8r,bncl8r entries.
284 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
286 * configure.in: detect cygwin* instead of cygwin32*
287 * configure: regenerate
289 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
291 * mips-opc.c (IS_M): Added.
294 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
296 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
300 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
302 start-sanitize-cygnus
303 * cgen-asm.in (insert_1): New function.
304 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
305 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
306 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
307 * cgen-dis.in (extract_1): New function.
308 (extract_normal): buf_ctrl renamed to ex_info, update type.
309 Progress on handling of CGEN_INT_INSN_P.
310 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
311 Update handling of CGEN_INT_INSN_P. Handle errors from
312 @arch@_cgen_extract_operand.
313 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
314 (default_print_insn): Renamed from print_insn.
315 Handle ! CGEN_INT_INSN_P.
316 (print_insn_@arch@): Handle error returns from print_insn.
317 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
318 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
319 (@arch@_cgen_lookup_get_insn_operands): Ditto.
321 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
324 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
326 * m10300-opc.c: Allow autoincrement stores using the same register
327 for source and destination operands.
329 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
331 * m10300-opc.c: DSP instrutions which only write to one general
332 register have no restrictions on matching operands.
334 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
337 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
339 * m32r-opc.h,m32r-opc.c: Regenerate.
342 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
344 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
347 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
349 * i386-dis.c (OP_3DNowSuffix): New static function.
352 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
353 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
354 (insn_codep): New static variable.
355 (print_insn_x86): Init insn_codep after prefixes.
356 (grps): Add GRP14 entries for prefetch, prefetchw.
359 From Jeff B Epler <jepler@usgs.gov>
360 * i386-dis.c (Suffix3DNow): New table.
362 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
364 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
366 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
368 * d10v-dis.c (print_operand): If num is nonzero, then
369 add OPERAND_ACC1, not OPERAND_ACC0.
371 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
373 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
376 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
378 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
382 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
384 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
387 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
389 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
391 start-sanitize-nortel-ppc750
392 1998-09-09 Michael Meissner <meissner@cygnus.com>
394 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
397 end-sanitize-nortel-ppc750
398 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
400 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
402 (print_insn_little_arm): Detect Thumb symbols in elf object
405 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
407 * alpha-dis.c (print_insn_alpha): Use the machine type to
408 decide which PALcode set to include.
410 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
412 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
414 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
416 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
417 MSUB and MSUBS instructions.
420 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
422 * mips-opc.c: Insert contents of vu0.h, rather than including it.
424 * Makefile.am: Rebuild dependencies.
428 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
430 * ppc-opc.c (powerpc_operands): Omit parens around additions in
433 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
435 start-sanitize-coldfire
436 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
437 ColdFire, as below for mulsl and mulul.
439 end-sanitize-coldfire
440 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
441 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
442 +, -, and d for ColdFire.
444 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
445 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
446 (extract_mbe): Likewise.
448 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
450 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
452 * m10300-opc.c: First cut at UDF instructions.
454 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
456 * m32r-opc.c: Regenerate (remove semantic descriptions).
458 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
460 * arm-dis.c (print_insn_big_arm): Fix indentation.
461 (print_insn_little_arm): Likewise.
463 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
465 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
467 (print_insn_little_arm): Likewise.
469 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
471 Move all global state data into opcode table struct, and treat
472 opcode table as something that is "opened/closed".
473 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
474 (cgen_asm_init): Delete.
475 (cgen_set_parse_operand_fn): New function.
476 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
477 (cgen_dis_init): Delete.
478 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
479 (cgen_current_{opcode_table_mach,endian}): Delete.
480 start-sanitize-cygnus
481 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
482 * cgen-dis.in (all fns): Ditto.
483 * cgen-opc.in (all fns): Ditto.
485 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
487 start-sanitize-cygnus
488 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
490 * cgen-dis.in (print_normal): Split into two.
491 (print_address): New function.
492 (extract_insn_normal): Clarify insn_value arg.
493 (print_int_insn): Renamed from print_insn.
494 (print_insn): New arg.
495 (print_insn_@arch@): Open opcode table if not already done so.
496 Move reading of insn into print_insn.
499 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
501 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
505 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
507 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
508 accept an accumulator choice.
509 * m32r-opc.c,m32r-opc.h: Regenerate.
512 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
514 * m10300-opc.c: Add entries for "no_match_operands" field in
518 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
520 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
524 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
526 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
529 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
531 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
533 * m10300-opc.c: Add autoincrement memory loads/stores.
537 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
539 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
540 phmsubh respectively.
543 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
545 start-sanitize-cygnus
546 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
548 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
549 @arch_cgen_get_int_operand.
550 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
551 Update call to @arch@_cgen_insert_operand.
552 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
553 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
554 (extract_insn_normal): New arg `pc', callers updated.
555 Update call to @arch@_cgen_extract_operand.
556 (print_insn): Update call to CGEN_EXTRACT_FN.
558 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
561 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
563 * m10300-opc.c: Fix load to sp and store from sp for the am33.
564 Add more multimedia instructions.
566 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
568 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
573 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
575 * mips-opc.c (pref): Enabled for the r5900.
578 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
580 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
582 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
584 (OP_J): Remove unnecessary subtraction when 16-bit displacement
585 will be masked later.
588 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
590 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
593 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
595 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
596 from raw register #s to symbolic names to make debugging easier.
599 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
601 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
603 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
605 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
606 start-sanitize-cygnus
607 * Makefile.am (CGENDIR): Set via configure.
608 (CGEN): New variable.
609 (CGENFILES): object.scm renamed to cos.scm.
610 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
611 (stamp-m32r): Pass prefix to run-cgen.
612 * Makefile.in: Regenerate.
613 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
614 * cgen-dis.in: Ditto.
615 * cgen-opc.in: Ditto.
616 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
617 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
618 * configure: Regenerate.
622 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
624 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
626 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
628 * m10300-opc.c: Reorder more instructions so that we do not
629 accidentally match a mn10300 instruction when we really
630 wanted an am33 instruction.
633 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
635 * m10300-dis.c: Only recognize instructions from the currently
637 * m10300-opc.c: Add field indicating the particular variant of
638 the mn10300 each instruction is available on.
640 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
642 * configure.in: For bfd_vax_arch, build vax-dis.lo.
643 * Makefile.am: Rebuild dependencies.
644 (CFILES): Add vax-dis.c.
645 (ALL_MACHINES): Add vax-dis.lo.
646 * aclocal.m4: Rebuild with current libtool.
647 * configure, Makefile.in: Rebuild.
649 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
651 * vax-dis.c: New file, from work by Pauline Middelink
652 <middelin@polyware.iaf.nl>.
653 * disassemble.c (ARCH_vax): Define if ARCH_all.
654 (disassembler): Add case for ARCH_vax.
655 * makefile.vms: Support compilation on vms/vax.
658 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
660 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
661 the DVP_OPERAND_RELOC_11_S4 relocation.
665 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
667 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
669 (disassemble): Correctly handle FMT_D10 instructions.
671 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
672 am33 shift instructions.
674 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
676 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
677 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
679 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
680 (mn10300_opcodes): Reorder so as to try and select opcodes from
681 the core chip when multiple alternatives exist. Change several
682 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
683 "macbu" instructions. Fix typos in a couple DSP instructions too.
686 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
688 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
689 related to sign extension and the size of ints.
691 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
693 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
694 instructions. Support (sp) addressing mode by expanding it into
698 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
700 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
701 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
702 be used as immediate values.
706 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
708 * m10300-opc.c: Support 4 byte DSP instructions.
711 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
713 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
716 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
718 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
721 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
723 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
726 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
728 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
729 found on the mn10300.
732 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
734 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
737 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
739 * mips-dis.c (print_insn_little_mips): Previously, instruction
740 printing references the symbol table to determine whether the
741 instruction resides in a block regular instructions or mips16
742 instructions. However, when the disassembler gets used in other
743 environments where the symbol table is not present, we no longer
744 rely in the symbol table, rather, use the low bit of the
745 instructions address to guess. There should be no change for usage
746 of the disassembler in host based programs, gdb, objdump.
747 (print_insn_big_mips): ditto.
748 (print_insn_mips): ditto
750 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
752 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
754 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
757 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
758 operands for the am33.
759 (mn10300_opcodes): Add new instructions from the am33.
761 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
763 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
765 * i386-dis.c (index16): Add '%' to register names. Use ','
768 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
770 * i386-dis.c: Don't print opcode suffix when we can figure out the
771 size (and gas can!) by register operands, or from the default
773 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
775 (dis386, dis386_twobyte, grps): Use new suffix macros.
776 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
777 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
778 order of cmps operands to agree with Intel docs. Correct operand
779 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
780 agree with Intel docs.
781 (print_insn_x86): Print orphan fwait before other prefixes.
782 Return correct byte count for orphan fwait with prefixes. Don't
783 print `bound' operands in reverse order.
784 (ckprefix): Stop accumulating prefixes if we get fwait.
785 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
787 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
789 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
790 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
792 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
794 Fix problems when bfd_vma is wider than long.
795 * i386-dis.c: Make op_address and start_pc unsigned.
796 (set_op): Make parameter unsigned.
797 (print_insn_x86): Cast to bfd_vma when passing a value to
799 * ns32k-dis.c (CORE_ADDR): Don't define.
800 (print_insn_ns32k): Change type of addr to bfd_vma. Use
801 bfd_scan_vma to read back address.
802 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
804 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
805 (NEXTULONG): New definition.
806 (print_insn_m68k): Avoid overflow when computing third argument of
808 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
809 Use disp instead of val to store offset values.
810 (print_indexed): Use base_disp instead of word to store base
811 displacement, to avoid overflow.
812 * m10300-dis.c (disassemble): Cast value to long when computing
813 pc-relative address, to get correct sign extension.
815 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
817 * m32r-opc.c: Regenerate.
819 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
821 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
822 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
824 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
826 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
828 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
830 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
832 (OP_DSreg): Rename from OP_DSSI.
833 (OP_ESreg): Rename from OP_ESDI.
834 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
836 (append_seg): Rename from append_prefix.
837 (ptr_reg): New function.
838 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
840 (PREFIX_ADDR): Rename from PREFIX_ADR.
841 (float_reg): Add non-broken opcodes for people who don't want
844 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
846 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
849 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
851 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
853 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
855 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
856 0; produce error message for shifts of size 32 (or 64 for 64-bit
857 shifts), because the hardware doesn't support them.
860 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
862 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
865 * vu0.h (sqc2): Fix opcode.
867 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
871 start-sanitize-cygnus
872 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
874 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
875 Change pinfo to use WR_HILO.
878 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
880 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
881 LONG_2, LONG_2b formats to use this new operand.
883 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
885 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
887 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
889 * sparc-dis.c (print_insn_sparc): big endian instruction / little
892 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
894 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
895 and SHORT_B3b formats to use Rb instead of Ra.
897 Add FLAG_MUL16 to MUL2XH opcode.
899 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
900 to existing 1.1.1 parallelisation prohibition procedure.
902 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
904 start-sanitize-cygnus
905 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
906 * cgen-dis.in (extract_normal): Likewise.
908 * m32r-asm.c,m32r-dis.c: Regenerate.
911 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
913 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
917 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
919 * mips-opc.c (multu1): Add two operand variant for the r5900.
922 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
924 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
925 with a shift count of 0.
928 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
930 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
932 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
934 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
935 (_print_insn_mips): Likewise.
936 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
940 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
942 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
943 (cgen_hw_lookup_by_num): New function.
946 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
949 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
951 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
953 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
955 * sparc-dis.c (print_insn_sparc): Always fetch instructions
956 as big-endian on SPARClite.
959 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
961 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
963 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
967 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
969 * d30v-opc.c (pre_defined_register): Remove alias for r0.
972 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
974 * mips-opc.c (break): Added 20-bit single-operand break
975 instruction for R5900 only.
978 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
980 * po/Make-in (install-info): New target.
982 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
984 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
985 * configure: Rebuild.
987 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
989 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
990 variety of ISA2 instructions to set bottom ten bits of trap code.
992 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
994 * Makefile.am (config.status): Add explicit target so that
995 config.status depends upon bfd/configure.in.
996 * Makefile.in: Rebuild.
998 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1000 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1001 instructions to set bottom ten bits of break code.
1002 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1003 for above optional argument.
1005 start-sanitize-cygnus
1006 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
1008 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
1009 * m32r-opc.h: Regenerate.
1012 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1014 * makefile.vms: Run dec c with /nodebug.
1016 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1018 * Makefile.in: Rebuilt.
1019 * Makefile.am: Regenerated dependencies with mkdep.
1021 * opintl.h (_): Define as dgettext.
1023 start-sanitize-cygnus
1024 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
1026 * configure.in: Add support for --enable-cgen-maint.
1027 * Makefile.am (M32R_DEPS): New variable.
1028 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
1029 * aclocal.m4: Regenerate.
1030 * Makefile.in: Regenerate.
1031 * configure: Regenerate.
1033 * Makefile.am (CGENFILES): Add minsn.scm.
1036 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1038 * cgen-asm.c: Internationalised.
1039 start-sanitize-cygnus
1040 * cgen-asm.in: Internationalised.
1041 * cgen-opc.in: Internationalised.
1043 * m32r-asm.c: Internationalised.
1044 * m32r-dis.c: Internationalised.
1045 * m32r-opc.c: Internationalised.
1047 * aclocal.m4: Regenerated.
1048 * configure: Regenerated.
1049 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1050 * Makefile.in: Rebuild.
1051 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1052 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1054 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1056 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1058 * aclocal.m4, configure: Rebuild with current tools.
1060 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1062 * opintl.h: New file - contains internationalisation macros used
1063 by source files in this directory.
1064 * po/: New subdirectory - contains internationalisation files.
1065 * po/Make-in: New file - Makefile constructor.
1066 * po/POTFILES.in: New file - list of files in opcodes directory
1067 that should be scan for internationalisation macros.
1068 * po/opcodes.pot: New file - list of internationisation strings
1069 found in files mentioned in po/POTFILES.in.
1070 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1071 entry. Add intl directory to include paths.
1072 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1073 HAVE_STRCPY, HAVE_LC_MESSAGES
1074 * configure.in: Add rule to build Makefile in po subdirectory.
1075 * Makefile.in: Rebuilt.
1076 * aclocal.m4: Rebuilt.
1077 * config.in: Rebuilt.
1078 * configure: Rebuilt.
1079 * alpha-opc.c: Internationalised.
1080 * arc-dis.c: Internationalised.
1081 * arc-opc.c: Internationalised.
1082 * arm-dis.c: Internationalised.
1083 * cgen-asm.c: Internationalised.
1084 * d30v-dis.c: Internationalised.
1085 * dis-buf.c: Internationalised.
1087 * dvp-dis.c: Internationalised.
1088 * dvp-opc.c: Internationalised.
1090 * h8300-dis.c: Internationalised.
1091 * h8500-dis.c: Internationalised.
1092 * i386-dis.c: Internationalised.
1093 * m10200-dis.c: Internationalised.
1094 * m10300-dis.c: Internationalised.
1095 * m68k-dis.c: Internationalised.
1096 * m88k-dis.c: Internationalised.
1097 * mips-dis.c: Internationalised.
1098 * ns32k-dis.c: Internationalised.
1099 * opintl.h: Internationalised.
1100 * ppc-opc.c: Internationalised.
1101 * sparc-dis.c: Internationalised.
1102 * v850-dis.c: Internationalised.
1103 * v850-opc.c: Internationalised.
1105 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1107 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1108 (asm_hash_table_entries): New variable.
1109 (cgen_asm_init): Free asm_hash_table_entries.
1110 (hash_insn_array,hash_insn_list): New functions.
1111 (build_asm_hash_table): Use them. Hash macro insns as well.
1112 (cgen_asm_lookup_insn): Update.
1113 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1114 (dis_hash_table_entries): New variable.
1115 (cgen_dis_init): Free dis_hash_table_entries.
1116 (hash_insn_array,hash_insn_list): New functions.
1117 (build_dis_hash_table): Use them. Hash macro insns as well.
1118 (cgen_dis_lookup_insn): Update.
1119 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1120 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1121 (cgen_macro_insn_count): New function.
1122 start-sanitize-cygnus
1123 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1124 All callers updated. Sanity check result of extract fn.
1125 (@arch@_cgen_get_insn_operands): Change result type to void.
1126 Delete args insn_value, length. New arg fields. All callers updated.
1127 (@arch@_cgen_lookup_get_insn_operands): New function.
1129 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1131 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1133 * i386-dis.c (OP_DSSI): Print segment override.
1135 start-sanitize-r5900
1136 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1138 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1141 start-sanitize-r5900
1142 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1144 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1147 start-sanitize-r5900
1148 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1150 * vu0.h (vlqd, vlqi): Update per revised specs.
1154 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1156 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1157 (vif_operands): Update.
1158 (vif_get_unpackloc): Delete.
1159 (state_vif_unpackloc{,_star_p}): Delete.
1160 (dvp_opcode_init_parse): Update.
1161 (vif_unpack_len_value): Avoid divide by zero.
1164 start-sanitize-r5900
1165 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1167 * vu0.h: Specs changed for VCALLMSR bit pattern.
1168 * mips-dis.c: (print_insn_arg) Matching change.
1171 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1173 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1176 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1178 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1179 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1180 * configure.in: Define and substitute WIN32LDFLAGS and
1182 * aclocal.m4: Rebuild with new libtool.
1183 * configure, Makefile.in: Rebuild.
1185 start-sanitize-r5900
1186 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1188 * vu0.h: Corrected bit pattern for VMAXI opcode.
1191 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1193 * m32r-opc.c: Regenerate.
1196 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1198 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1199 (dvp_expand_macro): Implement.
1200 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1201 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1204 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1206 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1207 before trying to copy it.
1208 * Makefile.in: Rebuild.
1210 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1212 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1214 start-sanitize-m32rx
1215 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1217 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1220 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1222 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1223 from an arbitrary valid buffer instead of fetching them on demand
1225 (invalid_float): use bit_extract_simple() instead of bit_extract().
1227 start-sanitize-m32rx
1228 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1230 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1231 * m32r-opc.h: Add extra control registers.
1234 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1236 From H.J. Lu <hjl@gnu.org>:
1237 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1240 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1242 * Branched binutils 2.9.
1244 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1246 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1247 disassembling last 4 bytes of a section.
1249 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1251 Fix some gcc -Wall warnings:
1252 * arc-dis.c (print_insn): Add casts to avoid warnings.
1253 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1254 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1256 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1257 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1258 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1259 (parse_ffstreg, parse_vif_mode): Likewise.
1261 * m10200-dis.c (disassemble): Likewise.
1262 * m10300-dis.c (disassemble): Likewise.
1263 * ns32k-dis.c (print_insn_ns32k): Likewise.
1264 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1265 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1266 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1267 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1268 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1270 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1271 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1272 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1274 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1275 start-sanitize-tic80
1276 * tic80-dis.c (print_one_instruction): Likewise.
1278 * w65-dis.c (print_operand): Likewise.
1279 * z8k-dis.c (fetch_data): Likewise.
1280 * a29k-dis.c: Add return type for find_byte_func_type.
1281 * arc-opc.c: Include <stdio.h>. Remove declarations of
1282 insert_multshift and extract_multshift.
1283 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1285 (extract_value): Fully parenthesize expression.
1287 * dvp-opc.c: Include <ctype.h>.
1288 (print_sdest): Add default case to switch.
1290 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1291 * h8500-opc.h (h8500_table): Fully bracket initializer.
1292 * w65-opc.h (optable): Likewise.
1293 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1294 * i386-dis.c (OP_E): Initialize local variables.
1295 * m10200-dis.c (print_insn_mn10200): Likewise.
1296 * mips-dis.c (print_insn_mips16): Likewise.
1297 * sh-dis.c (print_insn_shx): Likewise.
1298 * v850-dis.c (print_insn_v850): Likewise.
1299 * ns32k-dis.c (print_insn_arg): Declare.
1300 (get_displacement, invalid_float): Declare.
1301 (list_search, sign_extend, flip_bytes): Declare return type.
1302 (get_displacement): Likewise.
1303 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1305 (print_insn_ns32k): Make i unsigned.
1306 (invalid_float): Make static. Declare type of val.
1307 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1308 on each for iteration.
1309 * tic30-dis.c (get_indirect_operand): Likewise.
1310 * z8k-dis.c (print_insn_z8001): Declare return type.
1311 (print_insn_z8002): Likewise.
1312 (unparse_instr): Fix sprintf format strings.
1314 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1316 * mips-opc.c: Add "sync.l" and "sync.p".
1319 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1321 * dvp-opc.c (extract_vif_datalen): Rewrite.
1322 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1324 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1326 * dvp-dis.c (print_insn): Print unpack address in hex.
1327 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1328 Don't skip over '*', just record it.
1329 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1330 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1331 Don't skip over '*', just record it.
1332 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1333 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1334 (vif_opcodes): Likewise.
1335 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1336 (vif_macros,vif_macro_count): New globals.
1337 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1338 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1339 (vif_get_wl_cl): New function.
1340 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1343 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1345 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1346 default m68k variant to recognize.
1348 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1349 (ctrl, cobr, mem, ea): Likewise.
1350 (print_addr): Likewise. Remove cast.
1351 (ea): Cast argument of print_addr to bfd_vma.
1353 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1355 (cgen_parse_unsigned_integer): Likewise.
1356 (cgen_parse_address): Likewise.
1358 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1360 * i960-dis.c (ctrl): Add full braces to structure initialization.
1361 (cobr, mem, reg): Likewise.
1362 (ea): Correct parenthesization in expression.
1364 * cgen-asm.c: Include <ctype.h>.
1365 (build_asm_hash_table): Remove unused local variable i.
1366 (cgen_parse_keyword): Add casts to avoid warnings.
1368 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1369 symbol. Fix indentation.
1370 (print_insn_little_arm): Likewise.
1372 start-sanitize-r5900
1373 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1375 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1379 start-sanitize-m32rx
1380 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1382 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1387 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1389 * dvp-opc.c (vif_operand_datalen_special): New global.
1392 start-sanitize-r5900
1393 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1395 * vu0.h (vcallms): Use 'O' for call target operand.
1396 * mips-dis.c (print_insn_arg): Handle 'O'.
1399 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1401 * configure.in: Use AM_DISABLE_SHARED.
1402 * aclocal.m4, configure: Rebuild with libtool 1.2.
1404 start-sanitize-r5900
1405 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1407 * mips-dis.c: Change '%' to '#' in r5900 support.
1411 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1413 These patches are courtesy of Jonathan Walton and Tony Thompson
1414 (athompso@cambridge.arm.com).
1416 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1419 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1420 both the offset and the label closest to the destination.
1422 start-sanitize-r5900
1423 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1425 * vu0.h: New file with cop2/vu0 instructions.
1426 * mips-opc.c: Include vu0.h.
1427 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1429 (print_insn_mips): Do not emit a tab after an instruction if the
1430 first arg is an instruction completer (&). If the next arg is an
1431 escape character (%), then print the next arg verbatim.
1432 * Makefile.am (mips-opc.lo): Depend on vu0.h
1436 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1438 * dvp-opc.c (vif_opcodes): Add stcycl.
1440 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1442 * dvp-dis.c (print_dma): Change length from 16 to 8.
1445 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1447 * m32r-opc.h: Regenerate.
1450 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1452 * dvp-opc.c (print_dest1): Print dest spec again.
1453 (print_vfreg,print_accdest): Likewise.
1454 (vif_unpack_len): Round result up to word boundary.
1457 start-sanitize-vr4320
1458 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1460 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1462 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1464 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1469 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1471 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1472 (print_insn): Do mask comparison on proper opcode word.
1473 Print unsigned values in hex.
1474 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1475 (parse_bc): Catch missing dest.
1476 (parse_vfreg): Replace atoi call with strtol.
1477 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1478 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1479 (extract_gif_eop): New function.
1480 (gif_operands): Update eop entry.
1481 (VGIFOP,VGIFNREGS): Fix calcs.
1482 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1483 (gif_regs): Add entry for unused 11 case.
1484 (print_gif_regs): Print empty list instead of nothing.
1485 (extract_gif_nloop): Fix value calc.
1486 (print_gif_nloop): Always print value, even if 0.
1487 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1488 (vif_operands): Use them for wl,cl fields.
1489 (state_vif_wl,state_vif_cl): New static locals.
1490 (parse_vif_mode): Handle numeric args.
1491 (vif_unpack_len_value,vif_unpack_len): New functions.
1492 (vif_insn_len): Call vif_unpack_len.
1495 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1497 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1499 start-sanitize-cygnus
1500 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1502 * cgen-asm.in: Move insertion of generated routines to top of file.
1503 (insert_normal): Add prototype. Delete `shift' arg.
1504 * cgen-dis.in: Move insertion of generated routines to top of file.
1505 (extract_normal): Add prototype. Delete `shift' arg.
1506 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1507 (print_keyword): Add prototype. Fix type of `attrs' arg.
1510 start-sanitize-vr4320
1511 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1513 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1514 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1517 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1519 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1520 assume that info->symbols is non-empty.
1522 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1524 * alpha-opc.c (cvtqs) There is no such thing.
1525 (cvttq): Missing most of the /*d variants.
1527 start-sanitize-r5900
1528 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1530 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1532 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1533 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1536 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1538 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1539 delayed branches or jumps.
1542 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1544 * dvp-opc.c (vif_operands): Add unpack[u] support.
1545 (vif_opcodes): Ditto.
1546 (*_vif_imrubits): Renamed from *_vif_imrbits.
1548 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1550 * dvp-dis.c (print_insn): Handle word number.
1551 Handle mips address vs vu address.
1552 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1553 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1554 ({insert,extract}_dma_addr): Fix word ofset.
1555 ({insert,print}_gif_regs): Fix encode/decode.
1558 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1560 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1562 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1563 * tic30-dis.c (print_branch): Likewise.
1565 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1566 * dvp-dis.c (dvp_info_mach_type): New function.
1567 (print_insn_dvp): Call it.
1568 (print_vif): Return length of 4 if mpg or direct insn so following
1569 insns get properly disabled.
1570 (print_gif): Fix word order.
1571 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1572 (gif_operands): Fix word order.
1573 (gif_opcodes): Likewise.
1574 ({insert,extract,print}_gif_regs): Likewise.
1575 (gif_regs): Add new register number/name changes.
1576 (dma_opcodes): Add dmarefe insn.
1579 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1581 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1582 saved_symbol code as it is no longer needed.
1584 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1586 * cgen-asm.c: Include symcat.h.
1587 * cgen-dis.c,cgen-opc.c: Ditto.
1588 start-sanitize-cygnus
1589 * cgen-asm.in,cgen-dis.in: Ditto.
1591 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1594 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1596 * dvp-opc.c (extra_dma_flags): Fix typos.
1597 (dma_operands): Fix word numbers.
1598 (dma_opcodes): Likewise.
1599 ({insert,extract}_dma_flags): Likewise.
1602 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1604 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1607 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1609 * dvp-dis.c (print_gif): Complete.
1610 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1611 (state_gif_{nregs,regs,nloop}): New static locals.
1612 (*_gif_*): Complete.
1613 (dvp_opcode_init_{parse,print}): Init gif state locals.
1614 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1615 (vif_insn_len): Handle `unpack'.
1616 ({insert,extract}_dma_flags): Complete.
1619 start-sanitize-r5900
1620 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1622 * mips-opc.c (mula.s): Renamed from multa.s.
1625 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1627 * m32r-opc.[ch]: Regenerate.
1630 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1632 * dvp-opc.c (dma_operands): Rewrite.
1633 (dma_operand_{count,addr}): New globals.
1634 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1635 (insert_dma_addr): Insert value into insn.
1636 (extract_dma_addr): Extract value from insn.
1638 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1640 * dvp-dis.c (print_vu): Handle loi insns.
1641 (print_insn): Likewise.
1642 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1643 (vu_operands): Make LDEST1 a FAKE operand.
1644 (parse_dest1): Allow elided argument.
1645 (print_dest1): Don't print the argument.
1647 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1649 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1650 (print_vfreg): Don't print dest spec.
1651 (parse_accdest): Dest spec is optional.
1652 (print_accdest): Don't print dest spec.
1655 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1657 start-sanitize-cygnus
1658 * Makefile.am (CGENFILES): Update.
1659 * Makefile.in: Regenerate.
1660 * cgen-asm.in (insert_normal): Result is error message now.
1661 Validate value to be inserted.
1662 (insert_insn_normal): Result is error message now.
1663 (@arch@_cgen_assemble_insn): Update.
1665 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1666 arguments. Don't perform validation here.
1667 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1669 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1671 start-sanitize-cygnus
1672 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1673 operand instance list.
1675 * m32r-opc.c: Regenerate.
1677 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1679 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1680 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1682 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1684 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1686 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1688 * configure.in: Get the version number from BFD.
1689 * configure: Rebuild.
1691 From H.J. Lu <hjl@gnu.org>:
1692 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1693 * Makefile.in: Rebuild.
1695 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1697 * m32r-opc.c: Regenerate.
1698 * m32r-opc.h: Regenerate.
1700 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1702 start-sanitize-cygnus
1703 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1704 Ignore ALIAS insns if asked to.
1705 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1707 * m32r-opc.c: Regenerate.
1710 * dvp.opc.c: Nicely format opcode tables.
1711 (vu_operands): New element UFLAGS.
1712 (parse_uflags,print_uflags): New functions.
1713 (vu_upper_opcodes): Add UFLAGS to all insns.
1716 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1718 Fix rac to accept only a0:
1719 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1720 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1721 Introduce OPERAND_GPR.
1722 * d10v-dis.c (print_operand): Likewise.
1724 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1726 start-sanitize-cygnus
1727 * cgen-opc.in: New file.
1728 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1729 * Makefile.am (CGENFILES): Add cgen-opc.in.
1730 * Makefile.in: Regenerate.
1731 * cgen-dis.in (*): Use PTR instead of void *.
1732 (print_insn): Delete unused vars `i', `syntax'.
1734 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1735 (cgen_hw_lookup): Make result const.
1736 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1739 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1741 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1742 (vif_opcodes): Update renamed insns.
1743 * dvp-dis.c (*): Likewise.
1746 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1748 * configure, aclocal.m4: Rebuild with new libtool.
1750 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1752 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1753 instructions use a PC relative branch, not absolute.
1755 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1757 * configure.in: Set libtool_enable_shared rather than
1758 libtool_shared. Remove diversion hack.
1759 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1761 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1763 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1764 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1766 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1768 * tic30-dis.c: New file.
1769 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1770 * configure.in: Handle bfd_tic30_arch.
1771 * Makefile.am: Rebuild dependencies.
1772 (CFILES): Add tic30-dis.c
1773 (ALL_MACHINES): Add tic30-dis.lo.
1774 * configure, Makefile.in: Rebuild.
1776 start-sanitize-m32rx
1777 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1779 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1780 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1781 macwhi-a and macwlo-a instructions.
1785 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1787 * dvp-opc.c, fixed encoding of a bunch of instructions to
1788 be consistent with the asmvu assembler (and inconsistent
1789 with the specification).
1791 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1793 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1794 in the opcode table. The pkemscalf instruction must come first.
1796 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1798 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1801 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1803 * m32r-opc.h (HAVE_CPU_M32R): Define.
1806 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1808 * dvp-dis.c, dvp-opc.c: New files.
1809 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1810 * configure: Regenerate.
1811 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1812 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1813 (mips-dis.lo): Compile with @archdefs@.
1814 * Makefile.in: Regenerate.
1815 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1816 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1819 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1821 * v850-opc.c (insertion routines): If both alignment and size is
1822 wrong then report this.
1824 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1826 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1827 Only recognize instructions for the current target_processor.
1829 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1831 * d10v-dis.c (PC_MASK): Correct value.
1832 (print_operand): If there's a reloc, don't calculate the
1833 address because they could be in different sections.
1835 start-sanitize-cygnus
1836 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1838 * cgen.sh: Rewrite to be like simulator's version.
1839 * Makefile.am (cgen): Update call to cgen.sh.
1840 * Makefile.in: Regenerate
1843 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1845 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1846 instruction after the 4650's "mul" instruction; nobody's using the
1847 4010 these days. If object files someday indicate which processor
1848 variant they're intended for, we can do a better job at this.
1850 start-sanitize-r5900
1851 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1853 * mips-opc.c (c.lt.s): Add r5900 variant.
1857 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1859 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1860 table provided entry size. Use CGEN_INSN_MNEMONIC.
1861 (cgen_parse_keyword): Rewrite.
1862 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1863 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1864 * cgen-opc.c: Clean up pass over `struct foo' usage.
1865 (cgen_keyword_lookup_value): Handle "" entry.
1866 (cgen_keyword_add): Likewise.
1867 start-sanitize-cygnus
1868 * Makefile.am: Add cgen support.
1869 * Makefile.in: Regenerate.
1870 * configure.in: Add cgen support.
1871 * configure: Regenerate.
1872 * aclocal.m4: Regenerate.
1873 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1876 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1878 * mips-opc.c: Add FP_D to s.d instruction flags.
1880 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1882 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1884 start-sanitize-tic80
1885 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1887 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1888 PC relative offset forms before the 15 bit forms. An assembler command
1889 line option now chooses the default.
1892 start-sanitize-r5900
1893 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1895 * mips-opc.c: Add many missing r5900 instructions.
1898 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1900 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1901 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1903 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1905 * configure: Only build libopcodes shared if --enable-shared's value
1906 was `yes', or was set to `*opcodes*'.
1907 * aclocal.m4: Likewise.
1908 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1909 original source of this bit of code. It's not clear what the best fix
1912 start-sanitize-r5900
1913 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1915 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1917 start-sanitize-tic80
1918 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1920 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1921 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1922 offset forms before the 15 bit forms, to default to the long forms.
1925 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1927 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1929 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1931 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1932 symbol if none is present.
1933 (print_insn_big_arm): Prevent examination of stored symbol if
1936 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1938 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1940 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1942 * disassemble.c: Remove disasm_symaddr() function.
1944 * arm-dis.c: Use info->symbol instead of info->flags to determine
1945 if disassmbly should be in Thumb or Arm mode.
1947 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1949 * arm-dis.c: Add support for disassembling Thumb opcodes.
1950 (print_insn_thumb): New function.
1952 * disassemble.c (disasm_symaddr): New function.
1954 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1955 (thumb_opcodes): Table of Thumb opcodes.
1957 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1959 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1961 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1962 and 'v' as operand types.
1964 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1966 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1967 <olivier.carmona@di.epfl.ch>.
1968 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1969 which has a two word opcode with a one word argument.
1971 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1973 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1974 unsigned, not signed.
1975 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1977 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1979 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1980 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1981 (ftrv): Slay the cut-and-paste monster.
1983 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1985 * d10v-dis.c (print_operand):
1986 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1988 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1990 * d10v-opc.c (OPERAND_FLAG): Split into:
1991 (OPERAND_FFLAG, OPERAND_CFLAG) .
1995 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1997 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1998 field for all INSN_MACRO's.
1999 * mips16-opc.c: same
2001 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2003 * mips-opc.c (sync,cache): These are 3900 insns.
2005 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2007 sh-opc.h (sh_table): Remove ftst/nan.
2009 start-sanitize-cygnus
2010 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
2012 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
2013 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
2015 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
2019 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
2021 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
2022 Add tx49 insns and configury.
2025 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2027 * mips-opc.c (ffc, ffs): Fix mask.
2029 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2031 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2034 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2036 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2037 start-sanitize-cygnus
2038 Added VR5400 instructions.
2039 (N5): New cpu-id macro.
2041 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2043 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2045 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2046 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2048 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2050 * v850-dis.c (disassemble): Replace // with /* ... */
2052 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2054 * sparc-opc.c: Add wr & rd for v9a asr's.
2055 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2056 (v9a_asr_reg_names): New variable.
2057 Patch from David Miller <davem@vger.rutgers.edu>.
2059 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2061 * sparc-opc.c (v9notv9a): New insn type.
2062 (IMPDEP): Move to the end to not conflict with edge8 et al.
2063 Patch from David Miller <davem@vger.rutgers.edu>.
2065 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2067 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2069 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2071 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2073 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2075 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2076 of disassemble_info structure to determine if an overlay address
2077 has a matching symbol in low memory.
2079 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2080 new symbol_at_address_func field in disassemble_info structure.
2082 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2084 * v850-opc.c (extract_d22): Use signed arithmatic.
2086 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2088 * mips-opc.c: Three op mult is not an ISA insn.
2090 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2092 * mips-opc.c: Fix formatting.
2094 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2096 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2097 than assuming that char is signed. Explicitly sign extend 16 bit
2098 values, rather than assuming that short is 16 bits.
2099 (OP_sI, OP_J, OP_DIR): Likewise.
2101 start-sanitize-v850e
2102 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2104 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2108 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2110 * v850-opc.c: Fix typo in comment.
2112 * v850-dis.c (disassemble): Add test of processor type when
2113 determining opcodes.
2115 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2117 * configure.in: Use a diversion to set enable_shared before the
2118 arguments are parsed.
2119 * configure: Rebuild.
2121 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2123 * m68k-opc.c (TBL1): Use ! rather than `.
2124 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2126 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2128 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2130 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2132 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2135 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2136 * aclocal.m4: Rebuild with new libtool.
2137 * configure: Rebuild.
2139 start-sanitize-v850e
2140 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2142 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2145 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2147 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2149 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2151 * v850-opc.c (v850_opcodes): Further rearrangements.
2153 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2155 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2157 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2159 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2162 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2164 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2166 * mips16-opc.c: Added mips16 sdbbp.
2169 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2171 * v850-opc.c: Initialise processors field of v850_opcode structure.
2173 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2175 Merge changes from Martin Hunt:
2177 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2179 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2180 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2181 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2183 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2185 * d30v-dis.c (print_insn): First operand of d*i (delayed
2186 branch) instructions is relative.
2188 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2189 (d30v_operand_table): Add IMM6S3 type.
2190 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2192 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2193 and cmp instructions.
2195 * d30v-opc.c: Correct entries for repeat*, and sat*.
2196 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2197 types. Correct several formats.
2199 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2201 * d30v-opc.c (pre_defined_registers): Change control registers.
2203 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2204 SHORT_C2. Manual was incorrect.
2206 * d30v-dis.c (lookup_opcode): Return value now indicates
2207 if an opcode has a short and a long form. Used for deciding
2208 to append a ".s" or ".l".
2209 (print_insn): Append a ".s" to an instruction if it is
2210 the short form and ".l" if it is a long form. Do not append
2211 anything if the instruction has only one possible size.
2213 * d30v-opc.c: Change mulx2h to require an even register.
2214 New form: SHORT_A2; a SHORT_A form that needs an even
2215 register as the first operand.
2217 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2218 instruction was not being disassembled if there were an odd
2219 number of instructions.
2221 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2223 start-sanitize-v850e
2224 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2226 * v850-dis.c (disassemble): Improved display of register lists.
2229 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2231 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2232 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2233 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2234 fandnot1s, fandnot2s.
2236 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2238 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2240 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2242 * cgen-asm.c (cgen_parse_address): New argument resultp.
2243 All callers updated.
2244 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2246 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2248 * mn10200-dis.c (disassemble): PC relative instructions are
2249 relative to the next instruction, not the current instruction.
2251 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2253 * v850-dis.c (disassemble): Only signed extend values that are not
2254 returned by extract functions.
2255 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2257 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2259 * v850-opc.c: Update comments. Remove use of
2260 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2262 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2264 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2266 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2268 * configure: Rebuilt with latest devo autoconf for NT support.
2270 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2272 * v850-dis.c (disassemble): Use curly brace syntax for register
2275 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2276 where r0 is being used as a destination register.
2278 start-sanitize-v850e
2279 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2281 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2284 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2286 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2287 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2288 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2289 Add insns to access SGR and DBR.
2290 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2292 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2294 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2296 start-sanitize-v850e
2297 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2299 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2300 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2303 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2305 * configure (cgen_files): Add support for v850e target.
2306 * configure.in (cgen_files): Add support for v850e target.
2308 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2310 * configure (cgen_files): Add support for v850ea target.
2311 * configure.in (cgen_files): Add support for v850ea target.
2314 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2316 * configure.in (bfd_arc_arch): Add.
2317 * configure: Rebuild.
2318 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2319 * Makefile.in: Rebuild.
2320 * arc-dis.c, arc-opc.c: New files.
2321 * disassemble.c (ARCH_all): Define ARCH_arc.
2322 (disassembler): Add ARC support.
2324 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2326 start-sanitize-v850e
2327 * v850-dis.c (disassemble): Add support for v850EA instructions.
2329 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2330 (v850_opcodes): Add v850EA instructions.
2332 * v850-dis.c (disassemble): Add support for v850E instructions.
2334 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2335 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2336 insert_spe, extract_spe): New Functions.
2337 (v850_opcodes): Add v850E instructions.
2340 * v850-opc.c: Reorganised and re-layed out to improve readability
2343 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2345 * configure: Rebuild with autoconf 2.12.1.
2347 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2349 * aclocal.m4, configure: Rebuild with new automake patches.
2351 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2353 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2354 * acinclude.m4: Just include acinclude.m4 from BFD.
2355 * aclocal.m4, configure: Rebuild.
2357 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2359 * Makefile.am: New file, based on old Makefile.in.
2360 * acconfig.h: New file.
2361 * acinclude.m4: New file.
2362 * stamp-h.in: New file.
2363 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2364 Removed shared library handling; now handled by libtool. Replace
2365 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2366 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2367 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2368 handling in AC_OUTPUT.
2369 * dep-in.sed: Change .o to .lo.
2370 * Makefile.in: Now built with automake.
2371 * aclocal.m4: Now built with aclocal.
2372 * config.in, configure: Rebuild.
2374 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2376 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2378 start-sanitize-r5900
2379 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2381 * mips-opc.c: Fix coding of mtsa.
2384 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2386 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2388 * sparc-dis.c (sorted_opcodes): New static local.
2389 (struct opcode_hash): `opcode' is pointer to const element.
2390 (build_hash): First arg is now table of sorted pointers.
2391 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2392 (compare_opcodes): Update.
2394 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2396 * cgen-opc.c: #include <ctype.h>.
2397 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2398 Handle case insensitive hashing.
2399 (hash_keyword_value): Change type of `value' to unsigned int.
2401 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2403 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2404 precision FP, mark it as such. Likewise for double precision
2405 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2407 start-sanitize-r5900
2408 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2411 start-sanitize-r5900
2412 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2414 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2415 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2418 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2420 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2422 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2423 nesting depth when all the macros are expanded.
2425 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2427 * sparc-opc.c: The fcmp v9a instructions take an integer register
2428 as a destination, not a floating point register. From Christian
2429 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2431 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2433 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2434 syntax. From Roman Hodek
2435 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2437 * i386-dis.c (twobyte_has_modrm): Fix pand.
2439 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2441 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2443 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2445 * arm-dis.c: Add prototypes for arm_decode_shift and
2448 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2450 * mips-opc.c: Add r3900 insns.
2452 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2454 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2455 print delay slot instructions on the same line. When using a PC
2456 relative load, add a comment with the value being loaded if it can
2459 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2461 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2462 to pushS/popS for segment regs and byte constant so that
2463 pushw/popw printed when in 16 bit data mode.
2465 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2466 print cbtw, cwtd in 16 bit data mode.
2467 * i386-dis.c (putop): extra case W to support above.
2469 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2470 address size prefix in 16 bit address mode.
2472 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * sh-dis.c: Reindent. Rename local variable fprintf to
2477 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2479 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2481 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2483 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2485 * mips16-opc.c (mip16_opcodes): same.
2487 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2489 * m68k-opc.c (moveb): Change $d to %d.
2491 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2493 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2494 (twobyte_has_modrm): Likewise.
2496 (OP_MMX, OP_EM, OP_MS): New static functions.
2498 * i386-dis.c: Revert patch of April 4. The output now matches
2501 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2503 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2506 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2508 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2510 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2512 * Makefile.in (install): Depend upon installdirs.
2513 (installdirs): New target.
2515 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2517 From Thomas Graichen <graichen@rzpd.de>:
2518 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2519 * configure: Rebuild.
2521 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2523 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2524 Delete string{,s}.h support.
2526 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2528 * cgen-asm.c (cgen_parse_operand_fn): New global.
2529 (cgen_parse_{{,un}signed_integer,address}): Update call to
2530 cgen_parse_operand_fn.
2531 (cgen_init_parse_operand): New function.
2532 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2533 from cgen_asm_init_parse.
2534 (m32r_cgen_assemble_insn): New operand `errmsg'.
2535 Delete call to as_bad, return error message to caller.
2536 (m32r_cgen_asm_hash_keywords): #if 0 out.
2538 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2540 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2542 [case 'J']: Fix typo in register name.
2544 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2546 * configure.in: Substitute SHLIB_LIBS.
2547 * configure: Rebuild.
2548 * Makefile.in (SHLIB_LIBS): New variable.
2549 ($(SHLIB)): Use $(SHLIB_LIBS).
2551 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2553 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2555 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2557 * disassemble.c (disassembler): Handle m32r.
2559 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2561 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2562 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2563 * Makefile.in (CFILES): Add them.
2564 (ALL_MACHINES): Add them.
2565 (dependencies): Regenerate.
2566 * configure.in (cgen_files): New variable.
2567 (bfd_m32r_arch): Add entry.
2568 * configure: Regenerate.
2570 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2572 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2573 * configure: Rebuild.
2575 * Makefile.in: Rebuild dependencies.
2577 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2579 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2582 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2584 * Branched binutils 2.8.
2586 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2588 * m10200-dis.c: Rename from mn10200-dis.c.
2589 * m10200-opc.c: Rename from mn10200-opc.c.
2590 * m10300-dis.c: Rename from mn10300-dis.c
2591 * m10300-opc.c: Rename from mn10300-opc.c.
2592 * Makefile.in: Update accordingly.
2594 * mips16-opc.c: Add mul and dmul macros.
2596 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2598 * makefile.vms: Update CFLAGS, add clean target.
2600 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2602 * mips-opc.c: Add "wait". From Ralf Baechle
2603 <ralf@gnu.ai.mit.edu>.
2605 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2606 * configure, config.in: Rebuild.
2607 * sysdep.h: Include <stdlib.h> if it exists.
2608 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2610 * Makefile.in: Rebuild dependencies.
2612 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2614 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2615 Andrew Bray <andy@madhouse.demon.co.uk>.
2617 * mips-opc.c: Add cast when setting mips_opcodes.
2619 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2621 * v850-dis.c (disassemble): Fix sign extension problem.
2622 * v850-opc.c (extract_d*): Fix sign extension problems to make
2623 disassembly calculate branch offsets correctly.
2625 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2627 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2629 * mips-opc.c: Add dctr and dctw.
2631 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2633 * d30v-dis.c (print_insn): Change the way signed constants
2636 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2638 * Makefile.in (BFD_H): New variable.
2639 (HFILES): New variable.
2640 (CFILES): Add all C files.
2641 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2642 Delete old dependencies, and build new ones.
2643 * dep-in.sed: New file.
2645 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2647 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2649 start-sanitize-coldfire
2650 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2652 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2655 end-sanitize-coldfire
2656 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2658 * mn10200-opc.c: Change "trap" to "syscall".
2659 * mn10300-opc.c: Add new "syscall" instruction.
2661 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2663 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2664 mulul insns on the coldfire.
2666 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2668 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2669 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2670 (print_insn_little_arm): Likewise.
2672 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2674 Based on patches from H.J. Lu <hjl@lucon.org>:
2675 * i386-dis.c (fetch_data): Add prototype.
2676 * m68k-dis.c (fetch_data): Add prototype.
2677 (dummy_print_address): Add prototype. Make static.
2678 * ppc-opc.c (valid_bo): Add prototype.
2679 * sparc-dis.c (build_hash_table): Add prototype.
2680 (is_delayed_branch, compute_arch_mask): Add prototypes.
2681 (print_insn_sparc): Make several local variables const.
2682 (compare_opcodes): Change arguments to const PTR. Add prototype.
2683 * sparc-opc.c (arg): Change name field to be const.
2684 (lookup_name, lookup_value): Add prototypes. Change table and
2685 name parameters to be const.
2686 (sparc_encode_asi): Change name parameter to be const.
2687 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2688 (sparc_encode_sparclet_cpreg): Likewise.
2689 (sparc_decode_asi): Change return type to be const.
2690 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2691 (sparc_decode_sparclet_cpreg): Likewise.
2693 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2695 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2696 Solaris doesn't like the combined options, and the -f is
2698 (stamp-tshlink, install): Likewise.
2700 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2702 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2705 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2707 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2709 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2711 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2714 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2716 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2718 start-sanitize-tic80
2719 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2721 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2723 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2725 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2728 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2730 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2731 floatformat_to_double to make portable.
2732 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2735 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2737 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2738 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2740 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2742 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2743 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2745 start-sanitize-tic80
2746 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2748 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2749 (OFF_SL_BR_SCALED): ... to this, and added the flag
2750 TIC80_OPERAND_BASEREL to the flags word.
2751 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2755 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2757 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2758 Change mips_opcodes from const array to a pointer,
2759 and change bfd_mips_num_opcodes from const int to int,
2760 so that we can increase the size of the mips opcodes table
2763 start-sanitize-tic80
2764 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2766 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2767 store BITNUM values in the table in one's complement form
2768 to match behavior when assembler is given a raw numeric
2769 value for a BITNUM operand.
2770 * tic80-dis.c (print_operand_bitnum): Ditto.
2773 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2775 * d30v-opc.c: Removed references to FLAG_X.
2777 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2779 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2781 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2783 * Makefile.in: Added d30v object files.
2784 * configure: (bfd_d30v_arch) Rebuilt.
2785 * configure.in: (bfd_d30v_arch) Added new case.
2786 * d30v-dis.c: New file.
2787 * d30v-opc.c: New file.
2788 * disassemble.c (disassembler) Add entry for d30v.
2790 start-sanitize-tic80
2791 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2793 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2794 representations for the floating point BITNUM values.
2796 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2798 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2799 in the table in one's complement form, as they appear in the
2801 (tic80_symbol_to_value): Use macros to access predefined
2803 (tic80_value_to_symbol): Ditto.
2804 (tic80_next_predefined_symbol): New function.
2805 * tic80-dis.c (print_operand_bitnum): Remove code that did
2806 one's complement for BITNUM values.
2809 start-sanitize-r5900
2810 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2812 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2815 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2817 * makefile.vms: Remove 8 bit characters. Update to latest
2820 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2822 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2824 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2826 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2827 (IMM24_PCREL): Likewise.
2829 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2831 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2832 address for an extended PC relative instruction that is not a
2835 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2837 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2840 start-sanitize-tic80
2841 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2843 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2844 (tic80_opcodes): Sort entries so that long immediate forms
2845 come after short immediate forms, making it easier for
2846 assembler to select the right one for a given operand.
2849 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2851 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2853 (print_insn_mips16): Likewise.
2855 start-sanitize-r5900
2856 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2858 * mips-opc.c: add r5900.
2861 start-sanitize-tic80
2862 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2864 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2865 a symbol class that restricts translation to just that
2866 class (general register, condition code, etc).
2868 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2870 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2871 and REG_DEST_E for register operands that have to be
2872 an even numbered register. Add REG_FPA for operands that
2873 are one of the floating point accumulator registers.
2874 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2875 (tic80_opcodes): Change entries that need even numbered
2876 register operands to use the new operand table entries.
2877 Add "or" entries that are identical to "or.tt" entries.
2880 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2882 * mips16-opc.c: Add new cases of exit instruction for
2884 * mips-dis.c (print_mips16_insn_arg): Display floating point
2885 registers in operands of exit instruction. Print `$' before
2886 register names in operands of entry and exit instructions.
2888 start-sanitize-tic80
2889 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2891 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2892 pairs for all predefined symbols recognized by the assembler.
2893 Also used by the disassembling routines.
2894 (tic80_symbol_to_value): New function.
2895 (tic80_value_to_symbol): New function.
2896 * tic80-dis.c (print_operand_control_register,
2897 print_operand_condition_code, print_operand_bitnum):
2898 Remove private tables and use tic80_value_to_symbol function.
2901 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2903 * d10v-dis.c (print_operand): Change address printing
2904 to correctly handle PC wrapping. Fixes PR11490.
2906 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2908 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2911 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2913 * mips-dis.c (print_insn_mips16): Set insn_info information.
2914 (print_mips16_insn_arg): Likewise.
2916 * mips-dis.c (print_insn_mips16): Better handling of an extend
2917 opcode followed by an instruction which can not be extended.
2919 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2921 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2922 coldfire moveb instruction to not allow an address register as
2923 destination. Although the documentation does not indicate that
2924 this is invalid, experiments uncovered unexpected behavior.
2925 Added a comment explaining the situation. Thanks to Andreas
2926 Schwab for pointing this out to me.
2928 start-sanitize-tic80
2929 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2931 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2932 entries are presorted so that entries with the same mnemonic are
2933 adjacent to each other in the table. Sort the entries for each
2934 instruction so that this is true.
2937 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2939 * m68k-dis.c: Include <libiberty.h>.
2940 (print_insn_m68k): Sort the opcode table on the most significant
2941 nibble of the opcode.
2943 start-sanitize-tic80
2944 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2946 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2947 "vsub", "vst", "xnor", and "xor" instructions.
2948 (V_a1): Renamed from V_a, msb of accumulator reg number.
2949 (V_a0): Add macro, lsb of accumulator reg number.
2951 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2953 * tic80-dis.c (print_insn_tic80): Broke excessively long
2954 function up into several smaller ones and arranged for
2955 the instruction printing function to be callable recursively
2956 to print vector instructions that have both a load and a
2957 math instruction packed into a single opcode.
2958 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2959 to explain why it comes after the other vector opcodes.
2962 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2964 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2965 move insns to handle immediate operands.
2967 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2969 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2970 fix operand mask in the "moveml" entries for the coldfire.
2972 start-sanitize-tic80
2973 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2975 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2976 New macros for building vector instruction opcodes.
2977 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2978 FMT_LI, which were unused. The field is now a flags field.
2979 Remove some opcodes that are possible, but illegal, such
2980 as long immediate instructions with doubles for immediate
2981 values. Add "vadd" and "vld" instructions.
2983 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2985 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2986 the order more logical. Move the shift alias instructions ("rotl",
2987 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2988 interspersed with the regular sr.x and sl.x instructions. Add
2989 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2990 "sub", "subu", "swcr", and "trap".
2992 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2994 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2995 (OFF_SL_PC): Renamed from OFF_SL.
2996 (OFF_SS_BR): New operand type for base relative operand.
2997 (OFF_SL_BR): New operand type for base relative operand.
2998 (REG_BASE): New operand type for base register operand.
2999 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3000 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3001 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3003 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3004 10 char field, padded with spaces on rhs, rather than a string
3005 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3006 than old TIC80_OPERAND_RELATIVE. Add support for new
3007 TIC80_OPERAND_BASEREL flag bit.
3009 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3011 * tic80-dis.c (print_insn_tic80): Print floating point operands
3013 * tic80-opc.c (SPFI): Add single precision floating point
3014 immediate operand type.
3015 (ROTATE): Add rotate operand type for shifts.
3016 (ENDMASK): Add for shifts.
3017 (n): Macro for the 'n' bit.
3018 (i): Macro for the 'i' bit.
3019 (PD): Macro for the 'PD' field.
3020 (P2): Macro for the 'P2' field.
3021 (P1): Macro for the 'P1' field.
3022 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3026 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3028 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3029 adding in current address for pc-relative operands.
3031 start-sanitize-tic80
3032 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3034 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3035 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3036 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3037 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3038 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3039 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3040 (REG_SCALED, LSI_SCALED): New operand types.
3041 (E): New macro for 'E' bit at bit 27.
3042 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3043 opcodes, including the various size flavors (b,h,w,d) for
3044 the direct load and store instructions.
3046 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3048 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3050 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3051 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3052 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3053 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3054 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3055 masks with "MASK_* & ~M_*" to get the M bit reset.
3056 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3058 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3060 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3061 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3062 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3064 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3065 CC, SICR, and LICR table entries.
3066 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3067 "bcnd", and "brcr" opcodes.
3070 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3072 * ppc-opc.c (powerpc_operands): Make comment match the
3073 actual fields (no shift field).
3074 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3075 start-sanitize-tic80
3076 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3077 partial implementation, work in progress.
3078 * tic80-opc.c (tic80_operands): Begin construction operands table.
3079 (tic80_opcodes): Continue populating opcodes table and start
3080 filling in the operand indices.
3081 (tic80_num_opcodes): Add this.
3084 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3086 * m68k-opc.c: Add #B case for moveq.
3088 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3090 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3091 before they are used.
3093 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3095 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3096 for "breakpoint" instruction.
3098 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3100 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3101 (dep): Use ALL_CFLAGS rather than CFLAGS.
3103 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3105 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3108 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3110 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3111 start-sanitize-tic80
3112 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3115 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3117 * mips16-opc.c: Add "abs".
3119 start-sanitize-tic80
3120 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3122 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3123 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3124 (disassembler): Add bfd_arch_tic80 support to set disassemble
3125 to print_insn_tic80.
3126 * tic80-dis.c (print_insn_tic80): Add stub.
3128 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3130 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3131 * configure: Regenerate with autoconf.
3132 * tic80-dis.c: Add file.
3133 * tic80-opc.c: Add file.
3136 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3138 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3140 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3142 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3143 (mn10200_opcodes): Use it for some logicals and btst insns.
3144 Add "break" and "trap" instructions.
3146 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3148 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3150 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3152 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3153 relative load or add now depends upon whether the instruction is
3156 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3158 * mn10200-dis.c: Finish writing disassembler.
3159 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3160 Fix mask for "jmp (an)".
3162 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3163 handle endianness issues for mn10300.
3165 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3167 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3169 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3170 instruction. Fix opcode field for "movb (imm24),dn".
3172 * mn10200-opc.c (mn10200_operands): Fix insertion position
3175 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3177 * mn10200-opc.c: Create mn10200 opcode table.
3178 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3179 but moving along nicely.
3181 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3183 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3185 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3187 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3188 specifiers for fmovem* instructions.
3190 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3192 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3194 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3196 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3199 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3201 * mn10300-opc.c: Add some comments explaining the various
3204 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3206 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3208 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3211 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3212 operand specifiers in fmovm* instructions.
3214 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3216 * ppc-opc.c (insert_li): Give an error if the offset has the two
3217 least significant bits set.
3219 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3221 * mips-dis.c (print_insn_mips16): Separate the instruction from
3222 the arguments with a tab, not a space.
3224 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3226 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3229 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3232 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3234 * configure: Rebuild with autoconf 2.12.
3236 Add support for mips16 (16 bit MIPS implementation):
3237 * mips16-opc.c: New file.
3238 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3239 (mips16_reg_names): New static array.
3240 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3241 after seeing a 16 bit symbol.
3242 (print_insn_little_mips): Likewise.
3243 (print_insn_mips16): New static function.
3244 (print_mips16_insn_arg): New static function.
3245 * mips-opc.c: Add jalx instruction.
3246 * Makefile.in (mips16-opc.o): New target.
3247 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3248 * configure: Rebuild.
3250 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3252 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3253 operand specifiers in *save, *restore and movem* instructions.
3255 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3258 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3259 register operands for immediate arithmetic, not, neg, negx, and
3260 set according to condition instructions.
3262 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3263 specifier of the effective-address operand in immediate forms of
3264 arithmetic instructions. The specifier for the immediate operand
3265 notes how and where the constant will be stored.
3267 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3269 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3272 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3275 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3277 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3279 * mn10300-dis.c (disassemble): Handle register lists.
3281 * mn10300-opc.c: Fix handling of register list operand for
3282 "call", "ret", and "rets" instructions.
3284 * mn10300-dis.c (disassemble): Print PC-relative and memory
3285 addresses symbolically if possible.
3286 * mn10300-opc.c: Distinguish between absolute memory addresses,
3287 pc-relative offsets & random immediates.
3289 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3291 (disassemble): Handle SPLIT and EXTENDED operands.
3293 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3295 * mn10300-dis.c: Rough cut at printing some operands.
3297 * mn10300-dis.c: Start working on disassembler support.
3298 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3300 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3302 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3304 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3306 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3308 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3310 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3311 register argument is calls and jmp instructions.
3313 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3315 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3316 getx operand. Fix opcode for mulqu imm,dn.
3318 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3320 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3321 in MN10300_OPERAND_SPLIT operands for how many bits
3322 appear in the basic insn word. Add IMM32_HIGH24,
3323 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3324 (mn10300_opcodes): Use new operands as needed.
3326 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3327 for bset, bclr, btst instructions.
3328 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3330 * mn10300-opc.c (mn10300_operands): Remove many redundant
3331 operands. Update opcode table as appropriate.
3332 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3333 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3335 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3337 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3338 operands (for indexed load/stores). Fix bitpos for DI
3339 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3340 few instructions that insert immediates/displacements in the
3341 middle of the instruction. Add IMM8E for 8 bit immediate in
3342 the extended part of an instruction.
3343 (mn10300_operands): Use new opcodes as appropriate.
3345 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3347 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3348 sequential so the assembler never parallelizes it with
3351 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3353 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3354 a data/address register that appears in register field 0
3355 and register field 1.
3356 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3358 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3360 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3361 standard disassembly.
3363 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3364 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3365 Recategorize PALcode instructions.
3367 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3369 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3371 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3373 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3374 there are no operand types.
3376 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3378 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3380 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3382 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3384 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3386 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3388 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3389 and sst.w instructions.
3391 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3394 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3396 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3399 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3401 * ppc-opc.c (PPCPWR2): Define.
3402 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3405 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3407 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3408 field for movhu instruction.
3410 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3411 cast value to "long" not "signed long" to keep hpux10
3414 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3416 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3419 * mn10300-opc.c (FMT*): Remove definitions.
3421 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3422 for shift-by-register opcodes.
3424 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3425 into [AD][MN][01] for encoding the position of the register
3428 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3430 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3431 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3433 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3435 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3436 Fix various typos. Add "PAREN" operand.
3437 (MEM, MEM2): Define.
3438 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3439 operands. Fix several typos.
3441 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3444 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3446 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3447 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3449 (mn10300_opcodes): Break opcode format out into its own field.
3450 Update many operand fields to deal with signed vs unsigned
3451 issues. Fix one or two typos in the "mov" instruction
3452 opcode, mask and/or operand fields.
3454 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3456 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3457 m68851 wasn't reset.
3459 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3462 all opcodes. Very rough cut at operands for all opcodes.
3464 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3467 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3469 * mn10200-opc.c, mn10300-opc.c: New files.
3470 * mn10200-dis.c, mn10300-dis.c: New files.
3471 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3472 * disassemble.c: Break mn10x00 support into 10200 and 10300
3474 * configure.in: Likewise.
3475 * configure: Rebuilt.
3477 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3479 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3481 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3483 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3485 * disassemble (ARCH_mn10x00): Define.
3486 (disassembler): Handle bfd_arch_mn10x00.
3487 * configure.in: Recognize bfd_mn10x00_arch.
3488 * configure: Rebuilt.
3490 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3492 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3493 accordingly. Don't declare functions using op_rtn.
3495 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3497 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3498 params to be more standard.
3499 * (disassemble): Print absolute addresses and symbolic names for
3500 branch and jump targets.
3501 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3503 * (v850_opcodes): Add breakpoint insn.
3505 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3507 * m68k-opc.c: Move the fmovemx data register cases before the
3508 other cases, so that they get recognized before the data register
3509 does gets treated as a degenerate register list.
3511 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3513 * mips-opc.c: Add a case for "div" and "divu" with two registers
3514 and a destination of $0.
3516 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3518 * mips-dis.c (print_insn_arg): Add prototype.
3519 (_print_insn_mips): Ditto.
3521 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3523 * mips-dis.c (print_insn_arg): Print condition code registers as
3526 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3528 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3530 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3532 * v850-dis.c (disassemble): Make static. Provide prototype.
3534 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3536 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3539 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3541 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3542 ']' characters into the output stream.
3543 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3544 Add "memop" field to all opcodes (for the disassembler).
3545 Reorder opcodes so that "nop" comes before "mov" and "jr"
3546 comes before "jarl".
3548 * v850-dis.c (print_insn_v850): Fix typo in last change.
3550 * v850-dis.c (print_insn_v850): Properly handle disassembling
3551 a two byte insn at the end of a memory region when the memory
3552 region's size is only two byte aligned.
3554 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3556 * v850-dis.c (v850_reg_names): Define.
3557 (v850_sreg_names, v850_cc_names): Likewise.
3558 (disassemble): Very rough cut at printing operands (unformatted).
3560 * v850-opc.c (BOP_MASK): Fix.
3561 (v850_opcodes): Fix mask for jarl and jr.
3563 * v850-dis.c: New file. Skeleton for disassembler support.
3564 * Makefile.in Remove v850 references, they're not needed here.
3565 * configure.in: Add v850-dis.o when building v850 toolchains.
3566 * configure: Rebuilt.
3567 * disassemble.c (disassembler): Call v850 disassembler.
3569 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3570 (insert_d8_6, extract_d8_6): New functions.
3571 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3572 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3574 (IF4A, IF4B): Use "D7" instead of "D7S".
3575 (IF4C, IF4D): Use "D8_7" instead of "D8".
3576 (IF4E, IF4F): New. Use "D8_6".
3577 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3578 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3580 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3581 (v850_operands): Change D16 to D16_15, use special insert/extract
3582 routines. New new D16 that uses the generic insert/extract code.
3583 (IF7A, IF7B): Use D16_15.
3584 (IF7C, IF7D): New. Use D16.
3585 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3587 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3588 message. Issue an error if the branch offset is odd.
3590 * v850-opc.c: Add notes about needing special insert/extract
3591 for all the load/store insns, except "ld.b" and "st.b".
3593 * v850-opc.c (insert_d22, extract_d22): New functions.
3594 (v850_operands): Use insert_d22 and extract_d22 for
3596 (insert_d9): Fix range check.
3598 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3600 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3601 and set bits field to D9 and D22 operands.
3603 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3605 * v850-opc.c (v850_operands): Define SR2 operand.
3606 (v850_opcodes): "ldsr" uses R1,SR2.
3608 * v850-opc.c (v850_opcodes): Fix opcode specs for
3609 sld.w, sst.b, sst.h, sst.w, and nop.
3611 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3613 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3614 end of the opcode table.
3616 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3618 * d10v-opc.c (pre_defined_registers): Added register pairs,
3619 "r0-r1", "r2-r3", etc.
3621 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3623 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3624 Create I16U for an unsigned 16bit mmediate operand.
3625 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3627 * v850-opc.c (v850_operands): Define EP operand.
3628 (IF4A, IF4B, IF4C, IF4D): Use EP.
3630 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3631 with immediate operand, "movhi". Tweak "ldsr".
3633 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3634 correct. Get sld.[bhw] and sst.[bhw] closer.
3636 * v850-opc.c (v850_operands): "not" is a two byte insn
3638 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3640 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3642 * v850-opc.c (two): Get order of words correct.
3644 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3646 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3647 register source and destination operands.
3648 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3650 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3651 same thinko in "trap" opcode.
3653 * v850-opc.c (v850_opcodes): Add initializer for size field
3656 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3657 Add D8 for 8-bit unsigned field in short load/store insns.
3658 (IF4A, IF4D): These both need two registers.
3659 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3660 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3661 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3662 for "ldsr" and "stsr".
3663 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3666 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3667 short store word (sst.w).
3669 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3671 * v850-opc.c (v850_operands): Added insert and extract fields,
3672 pointers to functions that handle unusual operand encodings.
3674 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3676 * v850-opc.c (v850_opcodes): Enable "trap".
3678 * v850-opc.c (v850_opcodes): Fix order of displacement
3679 and register for "set1", "clr1", "not1", and "tst1".
3681 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3683 * v850-opc.c (v850_operands): Add "B3" support.
3684 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3687 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3689 * v850-opc.c: Close unterminated comment.
3691 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3693 * v850-opc.c (v850_operands): Add flags field.
3694 (v850_opcodes): add move opcodes.
3696 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3698 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3699 * configure: (bfd_v850v_arch) Add new case.
3700 * configure.in: (bfd_v850_arch) Add new case.
3701 * v850-opc.c: New file.
3703 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3705 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3707 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3709 * d10v-opc.c: Add additional information to the opcode
3710 table to help determinine which instructions can be done
3713 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3715 * mpw-make.sed: Update editing of include pathnames to be
3718 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3720 * arm-opc.h: Added "bx" instruction definition.
3722 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3724 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3726 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3728 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3730 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3732 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3734 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3736 * makefile.vms: Update for alpha-opc changes.
3738 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3740 * i386-dis.c (print_insn_i386): Actually return the correct value.
3741 (ONE, OP_ONE): #ifdef out; not used.
3743 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3745 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3746 Changed subi operand type to treat 0 as 16.
3748 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3750 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3753 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3755 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3756 memory transfer instructions. Add new format string entries %h and %s.
3757 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3760 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3762 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3763 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3765 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3767 * alpha-dis.c (print_insn_alpha_osf): Remove.
3768 (print_insn_alpha_vms): Remove.
3769 (print_insn_alpha): Make globally visible. Chose the register
3770 names based on info->flavour.
3771 * disassemble.c: Always return print_insn_alpha for the alpha.
3773 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3775 * d10v-dis.c (dis_long): Handle unknown opcodes.
3777 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3779 * d10v-opc.c: Changes to support signed and unsigned numbers.
3780 All instructions with the same name that have long and short forms
3781 now end in ".l" or ".s". Divs added.
3782 * d10v-dis.c: Changes to support signed and unsigned numbers.
3784 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3786 * d10v-dis.c: Change all functions to use info->print_address_func.
3788 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3790 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3791 move ccr/sr insns more strict so that the disassembler only
3792 selects them when the addressing mode is data register.
3794 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3795 * d10v-opc.c (pre_defined_registers): Declare.
3796 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3797 to pick a better name for the registers.
3799 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3801 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3802 operands for fexpand and fpmerge. From Christian Kuehnke
3803 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3805 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3807 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3808 print routine. Take new regnames and cpumask arguments.
3809 Kill the environment variable nonsense.
3810 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3811 (print_insn_alpha_vms): New function. Do VMS style regnames.
3812 * disassemble.c (disassembler): Test bfd flavour to pick
3813 between OSF and VMS routines. Default to OSF.
3815 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3817 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3818 * configure: Rebuild.
3819 * Makefile.in (install): Use @INSTALL_SHLIB@.
3821 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3823 * configure: (bfd_d10v_arch) Add new case.
3824 * configure.in: (bfd_d10v_arch) Add new case.
3825 * d10v-dis.c: New file.
3826 * d10v-opc.c: New file.
3827 * disassemble.c (disassembler) Add entry for d10v.
3829 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3831 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3832 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3834 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3836 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3837 distinguish between variants of the instruction set.
3838 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3839 distinguish between variants of the instruction set.
3841 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3843 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3844 the 8086 instruction set.
3845 * i386-dis.c: General cleanups. Make most things static. Add
3846 prototypes. Get rid of static variables aflags and dflags. Pass
3847 them as args (to almost everything).
3849 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3851 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3853 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3855 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3856 if the next arg is marked with SRC_IN_DST. Gross.
3858 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3859 we're looking for and find EXR.
3861 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3862 if we're looking for KBIT and we don't find it.
3864 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3867 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3868 3bit immediate operands.
3870 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3872 * Released binutils 2.7.
3874 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3875 <kkaempf@progis.ac-net.de>.
3877 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3879 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3881 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3883 * sparc-dis.c (print_insn_sparclite): New routine to print
3884 sparclite instructions.
3886 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3888 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3890 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3892 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3893 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3894 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3896 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3898 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3899 Use autoconf-set values.
3900 (docdir, oldincludedir): Removed.
3901 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3903 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3905 * alpha-opc.c: New file.
3906 * alpha-opc.h: Remove.
3907 * alpha-dis.c: Complete rewrite to use new opcode table.
3908 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3909 * configure: Rebuild with autoconf 2.10.
3910 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3911 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3913 (alpha-opc.o): New target.
3915 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3917 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3918 Set imm_added_to_rs1 even if the source and destination register
3921 * sparc-opc.c: Add some two operand forms of the wr instruction.
3923 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3925 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3928 * disassemble.c (disassembler): Handle H8/S.
3929 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3931 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3933 * sparc-opc.c: Add beq/teq as aliases for be/te.
3935 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3936 <sergei@msil.sps.mot.com>.
3938 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3940 * makefile.vms: New file.
3942 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3944 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3946 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3949 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3951 * i386-dis.c (OP_OFF): Call append_prefix.
3953 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3955 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3956 unsigned long to silence a warning from the Solaris PowerPC
3959 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3961 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3963 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3965 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3967 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3968 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3969 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3970 cpush, cpusha, cpull sparclet insns.
3972 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3974 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3976 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3978 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3979 Set F_FLOAT on other floating point instructions.
3981 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3983 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3985 (powerpc_opcodes): Add 860/821 specific SPRs.
3987 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3989 * configure.in: Permit --enable-shared to specify a list of
3990 directories. Set and substitute BFD_PICLIST.
3991 * configure: Rebuild.
3992 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3993 uses. Set to @BFD_PICLIST@.
3995 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3997 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3998 not "abs", which may be needed for the absolute in something
3999 like btst #0,@10:8. Print L_3 immediates separately from other
4000 immediates. Change ABSMOV reference to ABS8MEM.
4002 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4004 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4005 (current_arch_mask): New static global.
4006 (compute_arch_mask): New static function.
4007 (print_insn_sparc): Delete sparc_v9_p. New static local
4008 current_mach. Resort opcode table if current_mach changes.
4009 Generalize "insn not supported" test.
4010 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4011 Delete test for v9/!v9.
4012 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4014 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4015 (brfcx): Renamed to FBRX.
4016 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4017 coprocessor mnemonics are not supported on the sparclet).
4018 (condf): Renamed to CONDF.
4019 (SLCBCC2): Delete F_ALIAS flag.
4021 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4023 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4024 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4026 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4028 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4029 that the shared library version number is set correctly.
4031 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4033 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4034 Miles Bader <miles@gnu.ai.mit.edu>.
4035 * configure: Rebuild.
4037 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4039 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4042 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4044 * configure: Rebuild with autoconf 2.8.
4046 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4048 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4049 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4051 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4053 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4054 since they appear as targets in Makefile.in.
4055 * configure: Rebuild.
4057 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4059 * mpw-make.sed: Edit out shared library support bits.
4061 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4063 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4064 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4065 (sparc_opcodes): Add sparclet insns.
4066 (sparclet_cpreg_table): New static local.
4067 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4068 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4070 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4072 * i386-dis.c (index16): New static variable.
4073 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4075 (OP_indirE): Return result of OP_E.
4076 (OP_E): Check for 16 bit addressing mode, and disassemble
4077 correctly. Optimised 32 bit case a little. Don't print
4078 "(base,index,scale)" when sib specifies only an offset.
4080 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4082 * configure.in: Set and substitute SHLIB_DEP.
4083 * configure: Rebuild.
4084 * Makefile.in (SHLIB_DEP): New variable.
4085 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4086 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4087 COMMON_SHLIB, add them to piclist with appropriate modifications.
4088 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4089 here: just use piclist.
4091 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4093 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4094 (print_insn_sparc): Rewrite v9/not-v9 tests.
4095 (compare_opcodes): Likewise.
4096 * sparc-opc.c (MASK_<ARCH>): Define.
4097 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4098 (sparclet,v6notv9): Define.
4099 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4100 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4102 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4104 * configure.in: Call AC_PROG_CC before configure.host.
4105 * configure: Rebuild.
4107 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4109 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4111 * i386-dis.c (onebyte_has_modrm): New static array.
4112 (twobyte_has_modrm): New static array.
4113 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4115 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4117 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4120 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4122 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4125 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4127 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4128 m68010up, not just m68020up | cpu32.
4130 * Makefile.in (SONAME): New variable.
4131 ($(SHLINK)): Make a link to the transformed name, as well.
4132 (stamp-tshlink): New target.
4133 (install): Skip stamp-tshlink during install.
4135 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4137 * configure.in: Call AC_ARG_PROGRAM.
4138 * configure: Rebuild.
4139 * Makefile.in (program_transform_name): New variable.
4140 (install): Transform library name before installing it.
4142 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4144 * i960-dis.c (mem): Add HX dcinva instruction.
4146 Support for building as a shared library, based on patches from
4147 Alan Modra <alan@spri.levels.unisa.edu.au>:
4148 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4149 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4150 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4151 * configure: Rebuild.
4152 * Makefile.in (ALLLIBS): New variable.
4153 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4154 (COMMON_SHLIB, SHLINK): New variables.
4155 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4156 (STAGESTUFF): Remove variable.
4157 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4158 (stamp-piclist, piclist): New targets.
4159 ($(SHLIB), $(SHLINK)): New targets.
4160 ($(OFILES)): Depend upon stamp-picdir.
4161 (disassemble.o): Build twice if PICFLAG is set.
4162 (MOSTLYCLEAN): Add pic/*.o.
4163 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4164 (distclean): Remove pic and stamp-picdir.
4165 (install): Install shared libraries.
4166 (stamp-picdir): New target.
4168 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4170 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4171 Print unknown instruction as "unknown", rather than in hex.
4173 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4175 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4177 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4179 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4181 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4183 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4184 when necessary. From Ulrich Drepper
4185 <drepper@myware.rz.uni-karlsruhe.de>.
4187 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4189 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4190 sparc_num_opcodes. Update architecture enum values.
4191 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4192 (sparc_opcode_lookup_arch): New function.
4193 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4194 (sparc_opcodes): Add v9a shutdown insn.
4196 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4198 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4199 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4201 (print_insn_sparc64): Deleted.
4202 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4205 * sparc-opc.c (architecture_pname): Add v9a.
4207 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4209 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4210 incorrectly defined as 0x16 when it should be 0x15.
4211 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4212 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4213 excb (exception barrier) which is defined in the Alpha
4214 Architecture Handbook version 2.
4215 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4216 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4217 disassembled as or, for example.
4219 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4221 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4222 (_print_insn_mips): Change i from int to unsigned int.
4224 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4226 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4227 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4229 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4231 * i386-dis.c: Added Pentium Pro instructions.
4233 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4235 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4238 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4240 * sh-opc.h (sh_nibble_type): Added REG_B.
4241 (sh_arg_type): Added A_REG_B.
4242 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4244 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4246 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4250 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4252 * Makefile.in (distclean): Remove stamp-h. From Ronald
4253 F. Guilmette <rfg@monkeys.com>.
4255 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4257 From David Mosberger-Tang <davidm@azstarnet.com>:
4258 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4261 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4263 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4264 (sh_table): Added many SH3 opcodes.
4265 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4267 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4269 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4270 (subco,subco.): Mark this PPC, not PPCCOM.
4272 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4274 * configure: Rebuild with autoconf 2.7.
4276 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4278 * configure: Rebuild with autoconf 2.6.
4280 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4282 * configure.in: Sort list of architectures. Accept but do nothing
4283 for alliant, convex, pyramid, romp, and tahoe.
4285 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4287 * a29k-dis.c (print_special): Change num to unsigned int.
4289 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4291 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4294 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4296 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4297 * configure: Rebuilt.
4299 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4301 * configure.in: Add case for bfd_i860_arch.
4302 * configure: Rebuild.
4304 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4306 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4307 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4308 (NEXTDOUBLE): Likewise.
4309 (print_insn_m68k): Don't match fmoveml if there is more than one
4310 register in the list.
4311 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4313 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4315 * m68k-opc.c: Use #W rather than #w.
4316 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4318 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4320 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4321 and likewise for all the dbxx opcodes.
4323 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4325 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4327 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4329 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4330 the VR4100 specific instructions to the mips_opcodes structure.
4332 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4334 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4335 ugly Metrowerks bug in CW6, is fixed in CW7.
4337 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4339 * ppc-opc.c (whole file): Add flags for common/any support.
4341 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4343 * Makefile.in (BISON): Remove macro.
4344 (FLAGS_TO_PASS): Remove BISON.
4346 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4348 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4350 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4351 instructions that take no args by looking at the match mask.
4352 (print_insn_arg): Always print "%" before register names.
4353 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4354 [case '_']: Don't print "@#" before address.
4355 [case 'J']: Use "%s" as format string, not register name.
4356 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4358 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4360 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4363 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4365 From David Mosberger-Tang <davidm@azstarnet.com>
4367 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4368 (alpha_insn_set): added definitions for VAX floating point
4369 instructions (Unix compilers don't generate these, but handcoded
4370 assembly might still use them).
4372 * alpha-dis.c (print_insn_alpha): added support for disassembling
4373 the miscellaneous instructions in the Alpha instruction set.
4375 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4377 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4378 no longer create sysdep.h, sed ppc-opc.c to work around a
4379 serious Metrowerks C bug.
4380 * mpw-make.in: Remove.
4381 * mpw-make.sed: New file, used by mpw-configure to edit
4382 Makefile.in into an MPW makefile.
4384 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4386 * Makefile.in (maintainer-clean): New synonym for realclean.
4388 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4390 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4391 which use '0', '1', and '2' instead. Specify the proper size for
4392 a pmove immediate operand. Correct the pmovefd patterns to be
4393 moves to a register, not from a register.
4394 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4396 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4398 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4399 %psr, %wim, %tbr as F_NOTV9.
4401 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4403 * Makefile.in (Makefile): Just rebuild Makefile when running
4405 (config.h, stamp-h): New targets.
4406 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4407 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4408 rebuilding config.h.
4409 * configure: Rebuild.
4411 * mips-opc.c: Change unaligned loads and stores with "t,A"
4412 operands to use "t,A(b)".
4414 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4416 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4418 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4420 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4421 until 3 instead of until 2.
4423 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4425 * Makefile.in (ALL_CFLAGS): Define.
4426 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4427 (MOSTLYCLEAN): Add config.log.
4428 (distclean): Don't remove config.log.
4429 * configure.in: Substitute HDEFINES.
4430 * configure: Rebuild.
4432 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4434 * sh-opc.h (sh_arg_type): Add F_FR0.
4435 (sh_table, case fmac): Add F_FR0 as first argument.
4437 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4439 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4441 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4443 * sparc-dis.c: Remove all references to NO_V9.
4445 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4447 * aclocal.m4: Just include ../bfd/aclocal.m4.
4448 * configure: Rebuild.
4450 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4452 * sparc-dis.c (X_DISP19): Define.
4453 (print_insn, case 'G'): Use it.
4454 (print_insn, case 'L'): Sign extend displacement.
4456 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4458 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4459 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4460 host_makefile_frag or frags.
4461 * aclocal.m4: New file.
4462 * configure: Rebuild.
4463 * Makefile.in (INSTALL): Set to @INSTALL@.
4464 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4465 (INSTALL_DATA): Set to @INSTALL_DATA@.
4467 (AR_FLAGS): Set to rc rather than qc.
4468 (CC): Define as @CC@.
4469 (CFLAGS): Set to @CFLAGS@.
4470 (@host_makefile_frag@): Remove.
4471 (config.status): Remove dependency upon @frags@.
4473 * configure.in: ../bfd/config.bfd now just sets shell variables.
4474 Use them rather than looking through target Makefile fragments.
4475 * configure: Rebuild.
4477 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4479 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4481 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4483 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4484 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4487 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4488 (lookup_{name,value}): New functions.
4489 (prefetch_table): New static local.
4490 (sparc_{encode,decode}_prefetch): New functions.
4491 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4493 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4495 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4498 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4500 * sh-dis.c: Correct comment on first line of file.
4502 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4504 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4506 * sparc-opc.c (asi, membar): New static locals.
4507 (sparc_{encode,decode}_{asi,membar}): New functions.
4508 (sparc_opcodes, membar insn): Fix.
4509 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4510 Support decoding of membar masks.
4513 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4515 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4517 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4519 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4520 and likewise for the other branches. Add bhs as an alias for bcc,
4521 and likewise for the size variants. Add dbhs as an alias for
4524 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4526 * sh-opc.h (FP sts instructions): Update to match reality.
4528 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4530 * m68k-dis.c: (fpcr_names): Add % before all register names.
4531 (reg_names): Likewise.
4532 (print_insn_arg): Don't explicitly print % before register names.
4533 Add % before register names in static array names. In case 'r',
4534 print data registers as `@(Dn)', not `Dn@'. When printing a
4535 memory address, don't print @# before it.
4536 (print_indexed): Change base_disp and outer_disp from int to
4537 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4538 syntax. Sign extend 8 byte displacement correctly.
4539 (print_base): Print using MIT syntax. Print zpc when appropriate.
4540 Change parameter disp from int to bfd_vma.
4542 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4545 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4547 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4548 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4549 * sh-opc.h (sh_arg_type): Add new operand types.
4550 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4552 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4554 * Makefile.in (distclean): Remove generated file config.h.
4556 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4558 * Makefile.in (distclean): Remove generated file config.h.
4560 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4562 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4564 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4566 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4567 rather than numopcodes. Use m68k_opcodes rather than removed
4568 opcode function. Don't check F_ALIAS.
4569 (print_insn_arg): Change first parameter to be const char *.
4570 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4571 (m68k-opc.o): New target.
4572 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4573 * configure: Rebuild.
4575 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4577 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4578 (opcode_bits, opcode_hash_table): New variables.
4579 (opcodes_initialized): Renamed from opcodes_sorted.
4580 (build_hash_table): New function.
4581 (is_delayed_branch): Use hash table.
4582 (print_insn): Renamed from print_insn_sparc, made static.
4583 Build and use hash table. If !sparc64, ignore sparc64 insns,
4584 and vice-versa if sparc64.
4585 (print_insn_sparc, print_insn_sparc64): New functions.
4586 (compare_opcodes): Move sparc64 opcodes to end.
4587 Print commutative insns with constant second.
4588 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4590 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4592 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4593 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4594 avoids printing a delay slot in a delay slot.
4595 * sh-opc.h (sh_table): Fully bracket last entry.
4597 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4599 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4601 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4603 * configure.in: Get host_makefile_frag from ${srcdir}.
4605 * configure.in: Autoconfiscated. Check for string[s].h. Create
4606 config.h from config.in. Don't set up sysdep.h link.
4607 * sysdep.h: New file.
4608 * configure, config.in: New files, generated from configure.in.
4609 * Makefile.in: Updated to be processed autoconf-style.
4610 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4611 (Makefile): Depend on config.status.
4612 (config.status): New rule.
4613 * configure.bat: Update Makefile substitutions.
4615 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4617 * mips-opc.c (L1): Define.
4618 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4619 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4622 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4624 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4625 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4626 have multiple add units but only a single logical unit.
4628 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4629 shifted by 18, without any insertion or extraction function.
4630 (insert_cr, extract_cr): Remove.
4632 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4634 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4637 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4639 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4640 * sh-opc.h: Add copyright.
4642 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4644 * Makefile.in (crunch-m68k): Delete extra target accidentally
4645 checked in a while ago.
4647 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4649 * sh-opc.h (sh_table): Add SH3 support.
4651 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4653 * sh-opc.h: Added bsrf and braf.
4655 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4657 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4658 bogus [ls]fm{ea,fd} patterns.
4660 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4661 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4662 initialize it from memory. Make function static.
4663 (print_insn_{big,little}_arm): New functions.
4664 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4665 the correct endianness.
4667 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4669 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4672 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4674 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4675 17th, so that it builds again using GCC as the compiler.
4677 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4679 * mips-dis.c (print_insn_little_mips): Cast return value from
4680 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4681 expects an unsigned long, and that might be fewer words of
4682 argument storage (e.g., if bfd_vma is long long on a 32-bit
4684 (print_insn_big_mips): Likewise with bfd_getb32 value.
4685 (_print_insn_mips): Now static.
4687 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4689 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4690 gcc memory hog problem with initializer is fixed.
4692 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4694 Merge in support for Mac MPW as a host.
4695 (Old change descriptions retained for informational value.)
4697 * mpw-config.in (archname): Compute from the config.
4698 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4700 * mpw-config.in (target_arch): Compute from canonical target.
4701 (m68k, mips, powerpc, sparc): Add architectures.
4702 * mpw-make.in (disassemble.c.o): Add.
4703 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4705 * mpw-config.in (BFD_MACHINES): Set to a default value.
4706 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4708 * mpw-make.in (CSEARCH): Add extra-include to search path.
4710 * mpw-config.in (varargs.h): Don't create.
4711 (sysdep.h): Create using forward-include.
4712 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4714 * mpw-config.in: New file, MPW version of configure.in.
4715 * mpw-make.in: New file, MPW version of Makefile.in.
4717 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4719 * alpha-dis.c (print_insn_alpha): Put empty statement after
4722 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4724 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4725 (low_sign_extend): Likewise.
4726 (get_field): Delete unused function.
4727 (set_field, deposit_14, deposit_21): Likewise.
4729 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4731 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4734 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4736 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4738 * alpha-opc.h (OSF_ASMCODE): define
4739 print pal-code names as defined in App C of the
4740 Alpha Architecture Reference Manual
4742 * alpha-dis.c: cleaned up output
4743 print stylized code forms as defined in App A.4.3 of the
4744 Alpha Architecture Reference Manual
4746 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4748 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4750 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4753 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4755 * m68k-dis.c (opcode): New function. Returns address of opcode
4756 table entry given index, even if the opcode table was split to
4757 work around gcc bugs.
4758 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4760 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4761 (reg_names): Now const.
4762 (print_insn_arg): Arrays cacheFieldName and names now const.
4763 (print_indexed): Array scales now const.
4765 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4767 * ppc-opc.c: Sort recently added instructions by minor opcode
4768 number within major opcode number.
4770 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4772 * hppa-dis.c: Include libhppa.h.
4774 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4776 * mips-opc.c: Change dli to use M_DLI, and add dla.
4778 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4780 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4782 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4784 * mips-opc.c: Add r4650 mul instruction.
4786 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4788 * mips-opc.c: Add uld and usd macros for unaligned double load and
4791 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4793 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4794 mfdcr, mtdcr, icbt, iccci.
4796 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4798 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4799 signed char fields to shorts, more portable.
4801 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4803 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4804 char fields as signed chars, since they may have negative values.
4806 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4808 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4809 (mycroft@netbsd.org).
4811 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4813 From "Logg, Ed" <elogg@ea.com>:
4814 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4815 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4818 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4820 * ppc-opc.c: Changes based on patch from David Edelsohn
4821 <edelsohn@mhpcc.edu>.
4822 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4825 (insert_tbr): New static function.
4826 (extract_tbr): New static function.
4827 (XFXFXM_MASK, XFXM): Define.
4828 (XSPRBAT_MASK, XSPRG_MASK): Define.
4829 (powerpc_opcodes): Add instructions to access special registers by
4830 name. Add mtcr and mftbu.
4832 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4834 * mips-opc.c (P3): Define.
4835 (mips_opcodes): Add mad and madu.
4837 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4839 * configure.in: Add W65 support.
4840 * disassemble.c: Likewise.
4841 * w65-opc.h, w65-dis.c: New files.
4843 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4845 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4848 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4850 * mips-opc.c: Add dli as a synonym for li.
4852 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4854 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4855 print something for reserved opcode values, even if it won't
4858 * mips-dis.c (_print_insn_mips): When initializing, shift right
4859 and mask, to avoid sign extension problems on the Alpha.
4861 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4864 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4866 * sh-opc.h (mov.l gbr): Get direction right.
4867 * sh-dis.c (print_insn_shx): New function.
4868 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4869 print opcodes with right byte order.
4871 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4873 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4874 to avoid conflicts with getopt.
4876 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4878 * hppa-dis.c (print_insn_hppa): Read the instruction using
4879 bfd_getb32, so that it works on a little endian or 64 bit host.
4880 Remove unused local variable op.
4882 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4884 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4885 addu does not work correctly if -mips3.
4887 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4889 * a29k-dis.c (print_special): Add special register names defined
4890 on 29030, 29040 and 29050.
4891 (print_insn): Handle new operand type 'I'.
4893 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4895 * Makefile.in (INSTALL): Use top level install.sh script.
4897 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4899 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4900 that it works on a little endian host.
4902 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4904 * configure.in: Use ${config_shell} when running config.bfd.
4906 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4908 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4910 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4912 * a29k-dis.c (print_insn): Print the opcode.
4914 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4916 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4918 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4920 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4922 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4924 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4925 which store a value into memory.
4927 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4929 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4930 * arm-dis.c, arm-opc.h: New files.
4932 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4934 * Makefile.in (ns32k-dis.o): Add dependency.
4935 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4936 string, not as array of chars.
4938 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4940 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4942 * sparc-opc.c: Added sparclite extended FP operations, and
4943 versions of v9 impdep* instructions permitting specification of
4946 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4948 * i960-dis.c (reg_names): Now const.
4949 (struct sparse_tabent): New type, copied from array type in mem
4951 (ctrl): Local static array ctrl_tab now const.
4952 (cobr): Local static array cobr_tab now const.
4953 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4954 static variable mem_tab no longer explicitly initialized. Changed
4955 mem_init to const array of struct sparse_tabent.
4956 (reg): Local static variable reg_tab no longer explicitly
4957 initialized. Changed reg_init to const array of struct
4959 (ea): Local static array scale_tab now const.
4961 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4964 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4966 * configure.bat: the disassember needs to be enabled for
4967 "objdump -d" to work in djgpp.
4969 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4971 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4972 (invalid_float): Enabled general version, doesn't require running
4973 on ns32k host. Changed to take char* argument, and test for
4974 explicitly specified sizes, instead of using sizeof() on host CPU
4976 (INVALID_FLOAT): Cast first argument.
4977 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4978 list_P032, list_M032): Now const.
4979 (optlist, list_search): Made appropriate arguments now point to
4981 (print_insn_arg): Changed static array of one-character-string
4982 pointers into a static const array of characters; fixed sprintf
4983 statement accordingly.
4985 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4987 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4988 from distribution. A ns32k-dis.c from a previous distribution has
4989 been brought up to date and supports the new interface.
4991 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4993 * configure.in: add bfd_ns32k_arch target support.
4995 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4996 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4998 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5000 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5003 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5005 * h8300-dis.c, mips-dis.c: Don't use true and false.
5007 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5009 * configure.in: Change --with-targets to --enable-targets.
5011 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5013 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5014 opcodes to the first instruction with that opcode, to speed
5015 disassembly of large files. From ralphc@pyramid.com (Ralph
5018 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5020 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5022 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5024 * configure.bat: update to latest makefile.in
5026 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5028 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5029 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5030 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5031 slot insn is in a delay slot.
5032 * z8k-opc.h: (resflg): Fix patterns.
5033 * h8500-opc.h Fix CR insn patterns.
5035 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5037 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5038 "cmpl" before POWER versions, so that gas -many uses them.
5040 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5042 * disassemble.c: New file.
5043 * Makefile.in (OFILES): Add disassemble.o.
5044 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5045 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5046 binutils/configure.in.
5048 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5049 opcode being examined.
5051 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5053 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5054 (insert_ral, insert_ram, insert_ras): New functions.
5055 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5056 RAS for store with update.
5058 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5060 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5061 (edelsohn@npac.syr.edu).
5063 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5065 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5068 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5070 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5072 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5074 * ppc-opc.c (powerpc_operands): The signedp field has been
5075 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5076 instead. Add new operand SISIGNOPT.
5077 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5078 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5079 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5082 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5084 * i386-dis.c (struct private): Renamed to dis_private. `private'
5085 is a reserved word for dynix cc.
5087 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5089 * configure.in: Change error message to refer to bfd/config.bfd
5090 rather than bfd/configure.in.
5092 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5094 * ppc-opc.c: Define POWER2 as short alias flag.
5095 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5098 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5100 * i960-dis.c (print_insn_i960): Don't read a second word for
5101 opcodes 0, 1, 2 and 3.
5103 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5107 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5109 * m68881-ext.c: Removed; no longer used.
5110 * Makefile.in: Changed accordingly.
5112 * m68k-dis.c (ext_format_68881): Don't declare.
5113 (print_insn_m68k): If an instruction uses place 'i', it uses at
5114 least four fixed bytes.
5115 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5116 extended float, convert to double using floatformat_to_double, not
5117 ieee_extended_to_double, and fetch the data before converting it.
5119 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5121 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5122 davidj@ICSI.Berkeley.EDU (David Johnson).
5124 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5126 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5127 PowerPC uses bdnz[l][a].
5129 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5131 * dis-buf.c, i386-dis.c: Include sysdep.h.
5133 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5137 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5138 by Motorola PowerPC 601 with PPC_OPCODE_601.
5139 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5140 Disassemble Motorola PowerPC 601 instructions as well as normal
5141 PowerPC instructions.
5143 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5145 * i960-dis.c (reg, mem): Just use a static array instead of
5148 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5150 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5151 condition name index if this is for a negated condition.
5153 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5154 Floating point format for 'H' operand is backwards from normal
5155 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5156 operands (fmpyadd and fmpysub), handle bizarre register
5157 translation correctly for single precision format.
5159 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5160 or 'I' operands if the next format specifier is 'M' (fcmp
5161 condition completer).
5163 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5165 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5166 single number giving a bitmask for the MB and ME fields of an M
5167 form instruction. Change NB to accept 32, and turn it into 0;
5168 also turn 0 into 32 when disassembling. Seperated SH from NB.
5169 (insert_mbe, extract_mbe): New functions.
5170 (insert_nb, extract_nb): New functions.
5171 (SC_MASK): Mask out SA and LK bits.
5172 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5173 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5174 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5175 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5176 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5177 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5178 (powerpc_macros): Define table of macro definitions.
5179 (powerpc_num_macros): Define.
5181 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5182 if PPC_OPERAND_NEXT is set.
5184 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5186 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5187 char. Retrieve contents using bfd_getl32 instead of shifting.
5189 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5191 * ppc-opc.c: New file. Opcode table for PowerPC, including
5192 opcodes for POWER (RS/6000).
5193 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5194 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5195 (CFILES): Add ppc-dis.c.
5196 (ppc-dis.o, ppc-opc.o): New targets.
5197 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5199 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5201 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5202 No space before 'u', 'f', or 'N'.
5204 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5206 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5207 farther than we should.
5209 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5211 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5213 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5215 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5217 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5218 needs it, to prevent reading past the end of a section.
5220 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5222 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5223 Removed t,A case for la; always use t,A(b) case.
5225 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5227 From Ted Lemen <mellon@pepper.ncd.com>
5228 * mips-dis.c (print_insn_arg): Handle 'k'.
5229 * mips-opc.c: Make cache use k, not t.
5231 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5233 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5234 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5235 FLOAT_FORMAT_CODE to put out floating point register names.
5237 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5239 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5241 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5243 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5245 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5247 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5248 larger than 32. Moved dsxx32 variants first for disassembler.
5250 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5252 * z8kgen.c, z8k-opc.h: Add full lda information.
5254 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5256 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5257 movb instructions. Any necessary space will be emitted by
5258 the code to handle nullification completers.
5260 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5262 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5264 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5266 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5267 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5269 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5271 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5273 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5275 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5276 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5278 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5280 * m88k-dis.c (m88kdis): comment change. Remove space after
5282 (printop): handle new arg types DEC and XREG for m88110.
5284 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5286 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5287 type for absolute branch addresses. Delete special
5288 "ble" and "be" code in 'W' operand code.
5290 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5292 * mips-opc.c: Set hazard information correctly for branch
5293 likely instructions.
5295 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5297 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5298 info->fprintf_func for printing and info->print_address_func for
5301 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5303 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5305 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5307 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5308 Corrected second case of "b" for disassembler.
5310 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5312 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5313 to BFD swapping routines to correspond to BFD name changes.
5315 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5317 * mips-opc.c: Change div machine instruction to be z,s,t rather
5318 than s,t. Change div macro to be d,v,t rather than d,s,t.
5319 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5320 rem and remu which generates only the corresponding div
5321 instruction. This is for compatibility with the MIPS assembler,
5322 which only generates the simple machine instruction when an
5323 explicit destination of $0 is used.
5324 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5326 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5328 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5329 WR_31 hazard for bal, bgezal, bltzal.
5331 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5333 * hppa-dis.c (print_insn_hppa): Use print function
5334 from within the disassemble_info, not fprintf_filtered.
5336 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5338 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5339 Law, law@cs.utah.edu.)
5341 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5343 * mips-opc.c ("absu"): Removed.
5346 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5348 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5349 Changed hazard information to distinguish between memory load
5350 delays and coprocessor load delays.
5352 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5354 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5356 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5358 * configure.in: Don't pass cpu to config.bfd.
5360 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5362 * m88k-dis.c (m88kdis): Make class unsigned.
5364 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5366 * alpha-dis.c (print_insn_alpha): One branch format case was
5367 missing the instruction name.
5369 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5371 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5372 Add the arch-specific auxiliary files.
5373 (OFILES): Remove the arch-specific auxiliary files
5374 and use BFD_MACHINES instead of DIS_LIBS.
5375 * configure.in: Set BFD_MACHINES based on --with-targets option.
5377 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5379 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5382 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5384 * sparc-opc.c: Change CONST to const to deal with gcc
5385 -Dconst=__const -traditional.
5387 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5389 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5390 coprocessor instructions out of #if 0, and made them use new
5393 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5395 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5397 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5399 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5400 instruction, for use by the disassembler.
5402 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5403 hand-coded sign extensions that depended on 32-bit host ints.
5404 FIXME, we still depend on big-endian host bitfield ordering.
5405 (sparc_print_insn): Set the insn_info_valid field, and the
5406 other fields that describe the instruction being printed.
5408 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5410 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5411 `jmp' instead of just one of them.
5413 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5415 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5416 (fput_fp_reg_r): Renamed from fput_reg_r.
5417 (fput_fp_reg): New function.
5418 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5420 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5422 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5424 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5426 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5428 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5429 don't output a space.
5431 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5433 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5435 * mips-opc.c: New file, containing opcode table from
5436 ../include/opcode/mips.h.
5437 * Makefile.in: Add it.
5439 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5441 * m88k-dis.c: New file, moved in from gdb and changed to use the
5442 new dis-asm.h disassembler interface.
5443 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5444 (m88k-dis.o): New target.
5446 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5448 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5449 argument string const char * to correspond to opcode/mips.h.
5451 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5453 * mips-dis.c: Updated to account for name changes in new version
5455 * Makefile.in: Added header file dependencies.
5457 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5459 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5461 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5463 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5464 extend, rather than shifts.
5466 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5468 * Makefile.in: Undo 15 June change.
5470 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5472 * m68k-dis.c (print_insn_arg): Change return value to byte count
5474 * m68k-dis.c: Re-write to detect invalid operands before
5475 printing anything, so we can handle this the same way we
5476 handle invalid opcodes.
5478 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5480 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5482 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5484 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5487 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5489 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5491 * configure.in: Do make sysdep.h link.
5492 * Makefile.in: Search ../include. Don't search ../bfd.
5494 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5496 Changes from Jeff Law, law@cs.utah.edu:
5497 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5498 Do not print a space before the completers specified by
5501 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5503 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5504 defined, since gdb has been fixed.
5506 Changes from Jeff Law, law@cs.utah.edu:
5507 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5508 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5509 be a *disassemble_info, not a *FILE.
5510 * hppa-dis.c: Support 'd', '!', and 'a'.
5511 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5512 * hppa-dis.c: Delete cases which are no longer needed.
5514 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5516 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5518 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5520 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5523 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5525 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5526 * configure.in: No longer need to configure to get sysdep.h.
5528 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5530 * Patches from Jeffrey Law <law@cs.utah.edu>.
5531 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5532 templates for 1.1 FP computational instructions.
5534 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5536 * h8500-dis.c (print_insn_h8500): Address argument is type
5538 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5541 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5542 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5544 * sparc-dis.c (compare_opcodes): Move static declaration to
5547 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5549 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5550 instruction, remove unimp hack from 'l' argument.
5552 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5554 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5557 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5559 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5560 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5563 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5565 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5566 arrays of string pointers to 2-d arrays of chars, to save
5569 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5571 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5572 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5574 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5576 * hppa-dis.c: New file from Utah, adapted to new disassembler
5578 * Makefile.in: Include it.
5580 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5582 * sh-dis.c, sh-opc.h: New files.
5584 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5586 * alpha-dis.c, alpha-opc.h: New files.
5588 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5590 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5593 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5595 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5597 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5599 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5602 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5604 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5605 and double percent signs a few places.
5607 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5609 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5610 Use info->print_address_func not print_address.
5612 * dis-buf.c (generic_print_address): New function.
5614 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5616 * Makefile.in: Add sparc-dis.c.
5617 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5619 Add `add' instruction to the set that get checked
5620 for a preceding `sethi' in order to print an absolute address.
5621 * (print_insn): Disassembly prefers real instructions.
5622 (is_delayed_branch): Speed up.
5623 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5624 Still missing some float ops, and needs testing.
5625 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5626 F_ALIAS. Use printf, not fprintf, when not passing a file
5628 (compare_opcodes): Check that identical instructions have
5629 identical opcodes, complain otherwise.
5632 * Include reg_names.
5634 Use dis-asm.h/read_memory_func interface.
5636 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5638 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5639 deliberately return non-zero to setjmp from longjmp. Otherwise
5640 this code fails to compile.
5642 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5644 * m68k-dis.c: Fix prototype for fetch_arg().
5646 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5648 * dis-buf.c: New file, for new read_memory_func interface.
5649 Makefile.in (OFILES): Include it.
5650 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5651 Use new read_memory_func interface.
5653 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5655 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5656 * h8500-opc.h: Fix couple of opcodes.
5658 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5660 * Makefile.in: add dvi & installcheck targets
5662 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5664 * Makefile.in: Update for h8500-dis.c.
5666 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5668 * h8500-dis.c, h8500-opc.h: New files
5670 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5672 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5673 ../include/dis-asm.h.
5674 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5675 and ../gdb/m68k-pinsn.c).
5676 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5677 and ../gdb/i386-pinsn.c).
5678 * m68881-ext.c: New file. Moved definition of
5679 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5680 * Makefile.in: Adjust for new files.
5681 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5682 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5683 can be dis-assembled.
5685 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5687 * mips-dis.c (print_insn_arg): Now returns void.
5689 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5691 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5692 files that use the macros.
5694 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5696 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5697 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5698 (CFILES): Added mips-dis.c.
5700 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5702 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5703 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5705 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5707 * Makefile.in: Improve *clean rules.
5708 * configure.in: Allow a default host.
5710 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5712 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5713 files include other sysdep files
5715 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5717 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5719 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5721 * configure.in: For host support, use ../bfd/configure.host
5722 so it stays in sync with the ../bfd/hosts database.
5724 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5726 * configure.in: use cpu-vendor-os triple instead of nested cases
5728 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5730 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5731 *always* the wrong one.
5733 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5735 * z8kgen.c: added copyright info
5737 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5739 * z8k-dis.c (unparse_instr): prettier tabs
5740 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5742 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5744 * configure.in: Add ncr* configuration.
5745 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5746 picayune ANSI compilers happy.
5748 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5750 * configure.in (i386): Make i386 and i486 synonymous for now.
5751 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5753 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5755 * Makefile.in (install): Fix typo.
5757 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5759 * Makefile.in (make): Remove obsolete crud.
5760 (sparc-opc.o): Avoid Sun Make VPATH bug.
5762 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5764 * Makefile.in: since there are no SUBDIRS, remove rule and
5765 references of subdir_do.
5767 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5769 * Makefile.in (install): Get the library name right here too.
5770 Don't install bfd.h, since it's unrelated to this library. No
5771 subdirs to recurse into, either.
5772 (CFILES): The source file has a .c suffix, not .o.
5774 * sparc-opc.c: New file, moved from BFD.
5775 * Makefile.in (OFILES): Build it.
5777 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5779 * z8k-dis.c: fixed forward refferences of some declarations.
5781 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5783 * Makefile.in: get the name of the library right
5785 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5787 * z8k-dis.c: knows how to disassemble z8k stuff
5788 * z8k-opc.h: new file full of z8000 opcodes
5792 version-control: never