1 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
3 * configure.in: Added case for bfd_fr30_arch.
4 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
5 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
6 (CLEANFILES): Added stamp-fr30.
8 * fr30-asm.c: New file.
9 * fr30-dis.c: New file.
10 * fr30-opc.c: New file.
11 * fr30-opc.h: New file.
12 * po/POTFILES.in: Regenerated
13 * po/opcodes.pot: Regenerated
15 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
17 * configure.in: detect cygwin* instead of cygwin32*
18 * configure: regenerate
20 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
22 * mips-opc.c (IS_M): Added.
25 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
27 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
31 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
34 * cgen-asm.in (insert_1): New function.
35 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
36 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
37 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
38 * cgen-dis.in (extract_1): New function.
39 (extract_normal): buf_ctrl renamed to ex_info, update type.
40 Progress on handling of CGEN_INT_INSN_P.
41 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
42 Update handling of CGEN_INT_INSN_P. Handle errors from
43 @arch@_cgen_extract_operand.
44 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
45 (default_print_insn): Renamed from print_insn.
46 Handle ! CGEN_INT_INSN_P.
47 (print_insn_@arch@): Handle error returns from print_insn.
48 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
49 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
50 (@arch@_cgen_lookup_get_insn_operands): Ditto.
52 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
55 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
57 * m10300-opc.c: Allow autoincrement stores using the same register
58 for source and destination operands.
60 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
62 * m10300-opc.c: DSP instrutions which only write to one general
63 register have no restrictions on matching operands.
65 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
68 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
70 * m32r-opc.h,m32r-opc.c: Regenerate.
73 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
75 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
78 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
80 * i386-dis.c (OP_3DNowSuffix): New static function.
83 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
84 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
85 (insn_codep): New static variable.
86 (print_insn_x86): Init insn_codep after prefixes.
87 (grps): Add GRP14 entries for prefetch, prefetchw.
90 From Jeff B Epler <jepler@usgs.gov>
91 * i386-dis.c (Suffix3DNow): New table.
93 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
95 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
97 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
99 * d10v-dis.c (print_operand): If num is nonzero, then
100 add OPERAND_ACC1, not OPERAND_ACC0.
102 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
104 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
107 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
109 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
113 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
115 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
118 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
120 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
122 start-sanitize-nortel-ppc750
123 1998-09-09 Michael Meissner <meissner@cygnus.com>
125 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
128 end-sanitize-nortel-ppc750
129 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
131 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
133 (print_insn_little_arm): Detect Thumb symbols in elf object
136 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
138 * alpha-dis.c (print_insn_alpha): Use the machine type to
139 decide which PALcode set to include.
141 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
143 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
145 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
147 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
148 MSUB and MSUBS instructions.
151 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
153 * mips-opc.c: Insert contents of vu0.h, rather than including it.
155 * Makefile.am: Rebuild dependencies.
159 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
161 * ppc-opc.c (powerpc_operands): Omit parens around additions in
164 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
166 start-sanitize-coldfire
167 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
168 ColdFire, as below for mulsl and mulul.
170 end-sanitize-coldfire
171 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
172 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
173 +, -, and d for ColdFire.
175 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
176 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
177 (extract_mbe): Likewise.
179 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
181 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
183 * m10300-opc.c: First cut at UDF instructions.
185 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
187 * m32r-opc.c: Regenerate (remove semantic descriptions).
189 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
191 * arm-dis.c (print_insn_big_arm): Fix indentation.
192 (print_insn_little_arm): Likewise.
194 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
196 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
198 (print_insn_little_arm): Likewise.
200 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
202 Move all global state data into opcode table struct, and treat
203 opcode table as something that is "opened/closed".
204 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
205 (cgen_asm_init): Delete.
206 (cgen_set_parse_operand_fn): New function.
207 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
208 (cgen_dis_init): Delete.
209 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
210 (cgen_current_{opcode_table_mach,endian}): Delete.
211 start-sanitize-cygnus
212 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
213 * cgen-dis.in (all fns): Ditto.
214 * cgen-opc.in (all fns): Ditto.
216 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
218 start-sanitize-cygnus
219 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
221 * cgen-dis.in (print_normal): Split into two.
222 (print_address): New function.
223 (extract_insn_normal): Clarify insn_value arg.
224 (print_int_insn): Renamed from print_insn.
225 (print_insn): New arg.
226 (print_insn_@arch@): Open opcode table if not already done so.
227 Move reading of insn into print_insn.
230 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
232 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
236 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
238 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
239 accept an accumulator choice.
240 * m32r-opc.c,m32r-opc.h: Regenerate.
243 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
245 * m10300-opc.c: Add entries for "no_match_operands" field in
249 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
251 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
255 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
257 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
260 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
262 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
264 * m10300-opc.c: Add autoincrement memory loads/stores.
268 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
270 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
271 phmsubh respectively.
274 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
276 start-sanitize-cygnus
277 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
279 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
280 @arch_cgen_get_int_operand.
281 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
282 Update call to @arch@_cgen_insert_operand.
283 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
284 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
285 (extract_insn_normal): New arg `pc', callers updated.
286 Update call to @arch@_cgen_extract_operand.
287 (print_insn): Update call to CGEN_EXTRACT_FN.
289 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
292 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
294 * m10300-opc.c: Fix load to sp and store from sp for the am33.
295 Add more multimedia instructions.
297 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
299 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
304 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
306 * mips-opc.c (pref): Enabled for the r5900.
309 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
311 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
313 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
315 (OP_J): Remove unnecessary subtraction when 16-bit displacement
316 will be masked later.
319 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
321 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
324 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
326 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
327 from raw register #s to symbolic names to make debugging easier.
330 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
332 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
334 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
336 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
337 start-sanitize-cygnus
338 * Makefile.am (CGENDIR): Set via configure.
339 (CGEN): New variable.
340 (CGENFILES): object.scm renamed to cos.scm.
341 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
342 (stamp-m32r): Pass prefix to run-cgen.
343 * Makefile.in: Regenerate.
344 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
345 * cgen-dis.in: Ditto.
346 * cgen-opc.in: Ditto.
347 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
348 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
349 * configure: Regenerate.
353 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
355 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
357 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
359 * m10300-opc.c: Reorder more instructions so that we do not
360 accidentally match a mn10300 instruction when we really
361 wanted an am33 instruction.
364 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
366 * m10300-dis.c: Only recognize instructions from the currently
368 * m10300-opc.c: Add field indicating the particular variant of
369 the mn10300 each instruction is available on.
371 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
373 * configure.in: For bfd_vax_arch, build vax-dis.lo.
374 * Makefile.am: Rebuild dependencies.
375 (CFILES): Add vax-dis.c.
376 (ALL_MACHINES): Add vax-dis.lo.
377 * aclocal.m4: Rebuild with current libtool.
378 * configure, Makefile.in: Rebuild.
380 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
382 * vax-dis.c: New file, from work by Pauline Middelink
383 <middelin@polyware.iaf.nl>.
384 * disassemble.c (ARCH_vax): Define if ARCH_all.
385 (disassembler): Add case for ARCH_vax.
386 * makefile.vms: Support compilation on vms/vax.
389 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
391 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
392 the DVP_OPERAND_RELOC_11_S4 relocation.
396 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
398 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
400 (disassemble): Correctly handle FMT_D10 instructions.
402 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
403 am33 shift instructions.
405 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
407 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
408 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
410 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
411 (mn10300_opcodes): Reorder so as to try and select opcodes from
412 the core chip when multiple alternatives exist. Change several
413 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
414 "macbu" instructions. Fix typos in a couple DSP instructions too.
417 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
419 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
420 related to sign extension and the size of ints.
422 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
424 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
425 instructions. Support (sp) addressing mode by expanding it into
429 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
431 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
432 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
433 be used as immediate values.
437 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
439 * m10300-opc.c: Support 4 byte DSP instructions.
442 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
444 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
447 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
449 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
452 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
454 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
457 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
459 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
460 found on the mn10300.
463 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
465 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
468 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
470 * mips-dis.c (print_insn_little_mips): Previously, instruction
471 printing references the symbol table to determine whether the
472 instruction resides in a block regular instructions or mips16
473 instructions. However, when the disassembler gets used in other
474 environments where the symbol table is not present, we no longer
475 rely in the symbol table, rather, use the low bit of the
476 instructions address to guess. There should be no change for usage
477 of the disassembler in host based programse, gdb ,objdump.
478 (print_insn_big_mips): ditto.
479 (print_insn_mips): ditto
481 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
483 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
485 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
488 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
489 operands for the am33.
490 (mn10300_opcodes): Add new instructions from the am33.
492 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
494 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
496 * i386-dis.c (index16): Add '%' to register names. Use ','
499 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
501 * i386-dis.c: Don't print opcode suffix when we can figure out the
502 size (and gas can!) by register operands, or from the default
504 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
506 (dis386, dis386_twobyte, grps): Use new suffix macros.
507 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
508 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
509 order of cmps operands to agree with Intel docs. Correct operand
510 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
511 agree with Intel docs.
512 (print_insn_x86): Print orphan fwait before other prefixes.
513 Return correct byte count for orphan fwait with prefixes. Don't
514 print `bound' operands in reverse order.
515 (ckprefix): Stop accumulating prefixes if we get fwait.
516 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
518 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
520 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
521 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
523 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
525 Fix problems when bfd_vma is wider than long.
526 * i386-dis.c: Make op_address and start_pc unsigned.
527 (set_op): Make parameter unsigned.
528 (print_insn_x86): Cast to bfd_vma when passing a value to
530 * ns32k-dis.c (CORE_ADDR): Don't define.
531 (print_insn_ns32k): Change type of addr to bfd_vma. Use
532 bfd_scan_vma to read back address.
533 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
535 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
536 (NEXTULONG): New definition.
537 (print_insn_m68k): Avoid overflow when computing third argument of
539 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
540 Use disp instead of val to store offset values.
541 (print_indexed): Use base_disp instead of word to store base
542 displacement, to avoid overflow.
543 * m10300-dis.c (disassemble): Cast value to long when computing
544 pc-relative address, to get correct sign extension.
546 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
548 * m32r-opc.c: Regenerate.
550 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
552 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
553 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
555 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
557 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
559 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
561 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
563 (OP_DSreg): Rename from OP_DSSI.
564 (OP_ESreg): Rename from OP_ESDI.
565 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
567 (append_seg): Rename from append_prefix.
568 (ptr_reg): New function.
569 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
571 (PREFIX_ADDR): Rename from PREFIX_ADR.
572 (float_reg): Add non-broken opcodes for people who don't want
575 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
577 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
580 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
582 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
584 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
586 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
587 0; produce error message for shifts of size 32 (or 64 for 64-bit
588 shifts), because the hardware doesn't support them.
591 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
593 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
596 * vu0.h (sqc2): Fix opcode.
598 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
602 start-sanitize-cygnus
603 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
605 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
606 Change pinfo to use WR_HILO.
609 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
611 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
612 LONG_2, LONG_2b formats to use this new operand.
614 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
616 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
618 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
620 * sparc-dis.c (print_insn_sparc): big endian instruction / little
623 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
625 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
626 and SHORT_B3b formats to use Rb instead of Ra.
628 Add FLAG_MUL16 to MUL2XH opcode.
630 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
631 to existing 1.1.1 parallelisation prohibition procedure.
633 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
635 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
636 * cgen-dis.in (extract_normal): Likewise.
637 * m32r-asm.c,m32r-dis.c: Regenerate.
640 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
642 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
646 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
648 * mips-opc.c (multu1): Add two operand variant for the r5900.
651 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
653 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
654 with a shift count of 0.
657 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
659 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
661 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
663 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
664 (_print_insn_mips): Likewise.
665 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
669 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
671 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
672 (cgen_hw_lookup_by_num): New function.
675 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
678 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
680 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
682 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
684 * sparc-dis.c (print_insn_sparc): Always fetch instructions
685 as big-endian on SPARClite.
688 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
690 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
692 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
696 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
698 * d30v-opc.c (pre_defined_register): Remove alias for r0.
701 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
703 * mips-opc.c (break): Added 20-bit single-operand break
704 instruction for R5900 only.
707 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
709 * po/Make-in (install-info): New target.
711 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
713 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
714 * configure: Rebuild.
716 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
718 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
719 variety of ISA2 instructions to set bottom ten bits of trap code.
721 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
723 * Makefile.am (config.status): Add explicit target so that
724 config.status depends upon bfd/configure.in.
725 * Makefile.in: Rebuild.
727 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
729 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
730 instructions to set bottom ten bits of break code.
731 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
732 for above optional argument.
734 start-sanitize-cygnus
735 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
737 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
738 * m32r-opc.h: Regenerate.
741 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
743 * makefile.vms: Run dec c with /nodebug.
745 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
747 * Makefile.in: Rebuilt.
748 * Makefile.am: Regenerated dependencies with mkdep.
750 * opintl.h (_): Define as dgettext.
752 start-sanitize-cygnus
753 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
755 * configure.in: Add support for --enable-cgen-maint.
756 * Makefile.am (M32R_DEPS): New variable.
757 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
758 * aclocal.m4: Regenerate.
759 * Makefile.in: Regenerate.
760 * configure: Regenerate.
762 * Makefile.am (CGENFILES): Add minsn.scm.
765 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
767 * cgen-asm.c: Internationalised.
768 start-sanitize-cygnus
769 * cgen-asm.in: Internationalised.
770 * cgen-opc.in: Internationalised.
772 * m32r-asm.c: Internationalised.
773 * m32r-dis.c: Internationalised.
774 * m32r-opc.c: Internationalised.
776 * aclocal.m4: Regenerated.
777 * configure: Regenerated.
778 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
779 * Makefile.in: Rebuild.
780 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
781 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
783 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
785 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
787 * aclocal.m4, configure: Rebuild with current tools.
789 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
791 * opintl.h: New file - contains internationalisation macros used
792 by source files in this directory.
793 * po/: New subdirectory - contains internationalisation files.
794 * po/Make-in: New file - Makefile constructor.
795 * po/POTFILES.in: New file - list of files in opcodes directory
796 that should be scan for internationalisation macros.
797 * po/opcodes.pot: New file - list of internationisation strings
798 found in files mentioned in po/POTFILES.in.
799 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
800 entry. Add intl directory to include paths.
801 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
802 HAVE_STRCPY, HAVE_LC_MESSAGES
803 * configure.in: Add rule to build Makefile in po subdirectory.
804 * Makefile.in: Rebuilt.
805 * aclocal.m4: Rebuilt.
806 * config.in: Rebuilt.
807 * configure: Rebuilt.
808 * alpha-opc.c: Internationalised.
809 * arc-dis.c: Internationalised.
810 * arc-opc.c: Internationalised.
811 * arm-dis.c: Internationalised.
812 * cgen-asm.c: Internationalised.
813 * d30v-dis.c: Internationalised.
814 * dis-buf.c: Internationalised.
816 * dvp-dis.c: Internationalised.
817 * dvp-opc.c: Internationalised.
819 * h8300-dis.c: Internationalised.
820 * h8500-dis.c: Internationalised.
821 * i386-dis.c: Internationalised.
822 * m10200-dis.c: Internationalised.
823 * m10300-dis.c: Internationalised.
824 * m68k-dis.c: Internationalised.
825 * m88k-dis.c: Internationalised.
826 * mips-dis.c: Internationalised.
827 * ns32k-dis.c: Internationalised.
828 * opintl.h: Internationalised.
829 * ppc-opc.c: Internationalised.
830 * sparc-dis.c: Internationalised.
831 * v850-dis.c: Internationalised.
832 * v850-opc.c: Internationalised.
834 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
836 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
837 (asm_hash_table_entries): New variable.
838 (cgen_asm_init): Free asm_hash_table_entries.
839 (hash_insn_array,hash_insn_list): New functions.
840 (build_asm_hash_table): Use them. Hash macro insns as well.
841 (cgen_asm_lookup_insn): Update.
842 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
843 (dis_hash_table_entries): New variable.
844 (cgen_dis_init): Free dis_hash_table_entries.
845 (hash_insn_array,hash_insn_list): New functions.
846 (build_dis_hash_table): Use them. Hash macro insns as well.
847 (cgen_dis_lookup_insn): Update.
848 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
849 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
850 (cgen_macro_insn_count): New function.
851 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
852 All callers updated. Sanity check result of extract fn.
853 (@arch@_cgen_get_insn_operands): Change result type to void.
854 Delete args insn_value, length. New arg fields. All callers updated.
855 (@arch@_cgen_lookup_get_insn_operands): New function.
856 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
858 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
860 * i386-dis.c (OP_DSSI): Print segment override.
863 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
865 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
869 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
871 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
875 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
877 * vu0.h (vlqd, vlqi): Update per revised specs.
881 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
883 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
884 (vif_operands): Update.
885 (vif_get_unpackloc): Delete.
886 (state_vif_unpackloc{,_star_p}): Delete.
887 (dvp_opcode_init_parse): Update.
888 (vif_unpack_len_value): Avoid divide by zero.
892 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
894 * vu0.h: Specs changed for VCALLMSR bit pattern.
895 * mips-dis.c: (print_insn_arg) Matching change.
898 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
900 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
903 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
905 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
906 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
907 * configure.in: Define and substitute WIN32LDFLAGS and
909 * aclocal.m4: Rebuild with new libtool.
910 * configure, Makefile.in: Rebuild.
913 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
915 * vu0.h: Corrected bit pattern for VMAXI opcode.
918 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
920 * m32r-opc.c: Regenerate.
923 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
925 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
926 (dvp_expand_macro): Implement.
927 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
928 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
931 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
933 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
934 before trying to copy it.
935 * Makefile.in: Rebuild.
937 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
939 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
942 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
944 * m32r-opc.c: Fix bit patterns for SAT and SATB.
947 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
949 * ns32k-dis.c (bit_extract_simple): New function to extract bits
950 from an arbitrary valid buffer instead of fetching them on demand
952 (invalid_float): use bit_extract_simple() instead of bit_extract().
955 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
957 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
958 * m32r-opc.h: Add extra control registers.
961 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
963 From H.J. Lu <hjl@gnu.org>:
964 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
967 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
969 * Branched binutils 2.9.
971 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
973 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
974 disassembling last 4 bytes of a section.
976 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
978 Fix some gcc -Wall warnings:
979 * arc-dis.c (print_insn): Add casts to avoid warnings.
980 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
981 * d10v-dis.c (dis_long, dis_2_short): Likewise.
983 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
984 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
985 (parse_bc, parse_vfreg, parse_accdest): Likewise.
986 (parse_ffstreg, parse_vif_mode): Likewise.
988 * m10200-dis.c (disassemble): Likewise.
989 * m10300-dis.c (disassemble): Likewise.
990 * ns32k-dis.c (print_insn_ns32k): Likewise.
991 * ppc-opc.c (insert_ral, insert_ram): Likewise.
992 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
993 * cgen-opc.c (cgen_keyword_search_next): Likewise.
994 * d10v-dis.c (dis_long, dis_2_short): Likewise.
995 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
997 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
998 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
999 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1001 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1002 start-sanitize-tic80
1003 * tic80-dis.c (print_one_instruction): Likewise.
1005 * w65-dis.c (print_operand): Likewise.
1006 * z8k-dis.c (fetch_data): Likewise.
1007 * a29k-dis.c: Add return type for find_byte_func_type.
1008 * arc-opc.c: Include <stdio.h>. Remove declarations of
1009 insert_multshift and extract_multshift.
1010 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1012 (extract_value): Fully parenthesize expression.
1014 * dvp-opc.c: Include <ctype.h>.
1015 (print_sdest): Add default case to switch.
1017 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1018 * h8500-opc.h (h8500_table): Fully bracket initializer.
1019 * w65-opc.h (optable): Likewise.
1020 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1021 * i386-dis.c (OP_E): Initialize local variables.
1022 * m10200-dis.c (print_insn_mn10200): Likewise.
1023 * mips-dis.c (print_insn_mips16): Likewise.
1024 * sh-dis.c (print_insn_shx): Likewise.
1025 * v850-dis.c (print_insn_v850): Likewise.
1026 * ns32k-dis.c (print_insn_arg): Declare.
1027 (get_displacement, invalid_float): Declare.
1028 (list_search, sign_extend, flip_bytes): Declare return type.
1029 (get_displacement): Likewise.
1030 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1032 (print_insn_ns32k): Make i unsigned.
1033 (invalid_float): Make static. Declare type of val.
1034 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1035 on each for iteration.
1036 * tic30-dis.c (get_indirect_operand): Likewise.
1037 * z8k-dis.c (print_insn_z8001): Declare return type.
1038 (print_insn_z8002): Likewise.
1039 (unparse_instr): Fix sprintf format strings.
1041 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1043 * mips-opc.c: Add "sync.l" and "sync.p".
1046 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1048 * dvp-opc.c (extract_vif_datalen): Rewrite.
1049 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1051 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1053 * dvp-dis.c (print_insn): Print unpack address in hex.
1054 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1055 Don't skip over '*', just record it.
1056 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1057 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1058 Don't skip over '*', just record it.
1059 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1060 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1061 (vif_opcodes): Likewise.
1062 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1063 (vif_macros,vif_macro_count): New globals.
1064 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1065 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1066 (vif_get_wl_cl): New function.
1067 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1070 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1072 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1073 default m68k variant to recognize.
1075 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1076 (ctrl, cobr, mem, ea): Likewise.
1077 (print_addr): Likewise. Remove cast.
1078 (ea): Cast argument of print_addr to bfd_vma.
1080 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1082 (cgen_parse_unsigned_integer): Likewise.
1083 (cgen_parse_address): Likewise.
1085 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1087 * i960-dis.c (ctrl): Add full braces to structure initialization.
1088 (cobr, mem, reg): Likewise.
1089 (ea): Correct parenthesization in expression.
1091 * cgen-asm.c: Include <ctype.h>.
1092 (build_asm_hash_table): Remove unused local variable i.
1093 (cgen_parse_keyword): Add casts to avoid warnings.
1095 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1096 symbol. Fix indentation.
1097 (print_insn_little_arm): Likewise.
1099 start-sanitize-r5900
1100 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1102 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1106 start-sanitize-m32rx
1107 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1109 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1114 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1116 * dvp-opc.c (vif_operand_datalen_special): New global.
1119 start-sanitize-r5900
1120 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1122 * vu0.h (vcallms): Use 'O' for call target operand.
1123 * mips-dis.c (print_insn_arg): Handle 'O'.
1126 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1128 * configure.in: Use AM_DISABLE_SHARED.
1129 * aclocal.m4, configure: Rebuild with libtool 1.2.
1131 start-sanitize-r5900
1132 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1134 * mips-dis.c: Change '%' to '#' in r5900 support.
1138 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1140 These patches are courtesy of Jonathan Walton and Tony Thompson
1141 (athompso@cambridge.arm.com).
1143 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1146 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1147 both the offset and the label closest to the destination.
1149 start-sanitize-r5900
1150 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1152 * vu0.h: New file with cop2/vu0 instructions.
1153 * mips-opc.c: Include vu0.h.
1154 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1156 (print_insn_mips): Do not emit a tab after an instruction if the
1157 first arg is an instruction completer (&). If the next arg is an
1158 escape character (%), then print the next arg verbatim.
1159 * Makefile.am (mips-opc.lo): Depend on vu0.h
1163 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1165 * dvp-opc.c (vif_opcodes): Add stcycl.
1167 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1169 * dvp-dis.c (print_dma): Change length from 16 to 8.
1172 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1174 * m32r-opc.h: Regenerate.
1177 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1179 * dvp-opc.c (print_dest1): Print dest spec again.
1180 (print_vfreg,print_accdest): Likewise.
1181 (vif_unpack_len): Round result up to word boundary.
1184 start-sanitize-vr4320
1185 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1187 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1189 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1191 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1196 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1198 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1199 (print_insn): Do mask comparison on proper opcode word.
1200 Print unsigned values in hex.
1201 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1202 (parse_bc): Catch missing dest.
1203 (parse_vfreg): Replace atoi call with strtol.
1204 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1205 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1206 (extract_gif_eop): New function.
1207 (gif_operands): Update eop entry.
1208 (VGIFOP,VGIFNREGS): Fix calcs.
1209 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1210 (gif_regs): Add entry for unused 11 case.
1211 (print_gif_regs): Print empty list instead of nothing.
1212 (extract_gif_nloop): Fix value calc.
1213 (print_gif_nloop): Always print value, even if 0.
1214 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1215 (vif_operands): Use them for wl,cl fields.
1216 (state_vif_wl,state_vif_cl): New static locals.
1217 (parse_vif_mode): Handle numeric args.
1218 (vif_unpack_len_value,vif_unpack_len): New functions.
1219 (vif_insn_len): Call vif_unpack_len.
1222 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1224 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1226 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1228 * cgen-asm.in: Move insertion of generated routines to top of file.
1229 (insert_normal): Add prototype. Delete `shift' arg.
1230 * cgen-dis.in: Move insertion of generated routines to top of file.
1231 (extract_normal): Add prototype. Delete `shift' arg.
1232 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1233 (print_keyword): Add prototype. Fix type of `attrs' arg.
1235 start-sanitize-vr4320
1236 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1238 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1239 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1242 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1244 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1245 assume that info->symbols is non-empty.
1247 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1249 * alpha-opc.c (cvtqs) There is no such thing.
1250 (cvttq): Missing most of the /*d variants.
1252 start-sanitize-r5900
1253 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1255 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1257 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1258 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1261 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1263 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1264 delayed branches or jumps.
1267 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1269 * dvp-opc.c (vif_operands): Add unpack[u] support.
1270 (vif_opcodes): Ditto.
1271 (*_vif_imrubits): Renamed from *_vif_imrbits.
1273 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1275 * dvp-dis.c (print_insn): Handle word number.
1276 Handle mips address vs vu address.
1277 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1278 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1279 ({insert,extract}_dma_addr): Fix word ofset.
1280 ({insert,print}_gif_regs): Fix encode/decode.
1283 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1285 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1287 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1288 * tic30-dis.c (print_branch): Likewise.
1290 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1291 * dvp-dis.c (dvp_info_mach_type): New function.
1292 (print_insn_dvp): Call it.
1293 (print_vif): Return length of 4 if mpg or direct insn so following
1294 insns get properly disabled.
1295 (print_gif): Fix word order.
1296 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1297 (gif_operands): Fix word order.
1298 (gif_opcodes): Likewise.
1299 ({insert,extract,print}_gif_regs): Likewise.
1300 (gif_regs): Add new register number/name changes.
1301 (dma_opcodes): Add dmarefe insn.
1304 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1306 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1307 saved_symbol code as it is no longer needed.
1309 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1311 * cgen-asm.c: Include symcat.h.
1312 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1314 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1317 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1319 * dvp-opc.c (extra_dma_flags): Fix typos.
1320 (dma_operands): Fix word numbers.
1321 (dma_opcodes): Likewise.
1322 ({insert,extract}_dma_flags): Likewise.
1325 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1327 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1330 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1332 * dvp-dis.c (print_gif): Complete.
1333 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1334 (state_gif_{nregs,regs,nloop}): New static locals.
1335 (*_gif_*): Complete.
1336 (dvp_opcode_init_{parse,print}): Init gif state locals.
1337 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1338 (vif_insn_len): Handle `unpack'.
1339 ({insert,extract}_dma_flags): Complete.
1342 start-sanitize-r5900
1343 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1345 * mips-opc.c (mula.s): Renamed from multa.s.
1348 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1350 * m32r-opc.[ch]: Regenerate.
1353 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1355 * dvp-opc.c (dma_operands): Rewrite.
1356 (dma_operand_{count,addr}): New globals.
1357 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1358 (insert_dma_addr): Insert value into insn.
1359 (extract_dma_addr): Extract value from insn.
1361 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1363 * dvp-dis.c (print_vu): Handle loi insns.
1364 (print_insn): Likewise.
1365 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1366 (vu_operands): Make LDEST1 a FAKE operand.
1367 (parse_dest1): Allow elided argument.
1368 (print_dest1): Don't print the argument.
1370 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1372 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1373 (print_vfreg): Don't print dest spec.
1374 (parse_accdest): Dest spec is optional.
1375 (print_accdest): Don't print dest spec.
1378 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1380 * Makefile.am (CGENFILES): Update.
1381 * Makefile.in: Regenerate.
1382 * cgen-asm.in (insert_normal): Result is error message now.
1383 Validate value to be inserted.
1384 (insert_insn_normal): Result is error message now.
1385 (@arch@_cgen_assemble_insn): Update.
1386 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1387 arguments. Don't perform validation here.
1388 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1390 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1392 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1393 operand instance list.
1394 * m32r-opc.c: Regenerate.
1396 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1398 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1399 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1401 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1403 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1405 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1407 * configure.in: Get the version number from BFD.
1408 * configure: Rebuild.
1410 From H.J. Lu <hjl@gnu.org>:
1411 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1412 * Makefile.in: Rebuild.
1414 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1416 * m32r-opc.c: Regenerate.
1417 * m32r-opc.h: Regenerate.
1419 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1421 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1422 Ignore ALIAS insns if asked to.
1423 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1424 * m32r-opc.c: Regenerate.
1427 * dvp.opc.c: Nicely format opcode tables.
1428 (vu_operands): New element UFLAGS.
1429 (parse_uflags,print_uflags): New functions.
1430 (vu_upper_opcodes): Add UFLAGS to all insns.
1433 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1435 Fix rac to accept only a0:
1436 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1437 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1438 Introduce OPERAND_GPR.
1439 * d10v-dis.c (print_operand): Likewise.
1441 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1443 * cgen-opc.in: New file.
1444 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1445 * Makefile.am (CGENFILES): Add cgen-opc.in.
1446 * Makefile.in: Regenerate.
1448 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1449 (cgen_hw_lookup): Make result const.
1451 * cgen-dis.in (*): Use PTR instead of void *.
1452 (print_insn): Delete unused vars `i', `syntax'.
1454 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1457 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1459 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1460 (vif_opcodes): Update renamed insns.
1461 * dvp-dis.c (*): Likewise.
1464 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1466 * configure, aclocal.m4: Rebuild with new libtool.
1468 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1470 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1471 instructions use a PC relative branch, not absolute.
1473 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1475 * configure.in: Set libtool_enable_shared rather than
1476 libtool_shared. Remove diversion hack.
1477 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1479 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1481 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1482 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1484 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1486 * tic30-dis.c: New file.
1487 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1488 * configure.in: Handle bfd_tic30_arch.
1489 * Makefile.am: Rebuild dependencies.
1490 (CFILES): Add tic30-dis.c
1491 (ALL_MACHINES): Add tic30-dis.lo.
1492 * configure, Makefile.in: Rebuild.
1494 start-sanitize-m32rx
1495 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1497 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1498 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1499 macwhi-a and macwlo-a instructions.
1503 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1505 * dvp-opc.c, fixed encoding of a bunch of instructions to
1506 be consistent with the asmvu assembler (and inconsistent
1507 with the specification).
1509 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1511 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1512 in the opcode table. The pkemscalf instruction must come first.
1514 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1516 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1519 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1521 * m32r-opc.h (HAVE_CPU_M32R): Define.
1524 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1526 * dvp-dis.c, dvp-opc.c: New files.
1527 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1528 * configure: Regenerate.
1529 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1530 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1531 (mips-dis.lo): Compile with @archdefs@.
1532 * Makefile.in: Regenerate.
1533 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1534 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1537 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1539 * v850-opc.c (insertion routines): If both alignment and size is
1540 wrong then report this.
1542 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1544 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1545 Only recognize instructions for the current target_processor.
1547 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1549 * d10v-dis.c (PC_MASK): Correct value.
1550 (print_operand): If there's a reloc, don't calculate the
1551 address because they could be in different sections.
1553 start-sanitize-cygnus
1554 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1556 * cgen.sh: Rewrite to be like simulator's version.
1557 * Makefile.am (cgen): Update call to cgen.sh.
1558 * Makefile.in: Regenerate
1561 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1563 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1564 instruction after the 4650's "mul" instruction; nobody's using the
1565 4010 these days. If object files someday indicate which processor
1566 variant they're intended for, we can do a better job at this.
1568 start-sanitize-r5900
1569 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1571 * mips-opc.c (c.lt.s): Add r5900 variant.
1575 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1577 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1578 table provided entry size. Use CGEN_INSN_MNEMONIC.
1579 (cgen_parse_keyword): Rewrite.
1580 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1581 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1582 * cgen-opc.c: Clean up pass over `struct foo' usage.
1583 (cgen_keyword_lookup_value): Handle "" entry.
1584 (cgen_keyword_add): Likewise.
1585 start-sanitize-cygnus
1586 * Makefile.am: Add cgen support.
1587 * Makefile.in: Regenerate.
1588 * configure.in: Add cgen support.
1589 * configure: Regenerate.
1590 * aclocal.m4: Regenerate.
1591 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1594 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1596 * mips-opc.c: Add FP_D to s.d instruction flags.
1598 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1600 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1602 start-sanitize-tic80
1603 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1605 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1606 PC relative offset forms before the 15 bit forms. An assembler command
1607 line option now chooses the default.
1610 start-sanitize-r5900
1611 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1613 * mips-opc.c: Add many missing r5900 instructions.
1616 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1618 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1619 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1621 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1623 * configure: Only build libopcodes shared if --enable-shared's value
1624 was `yes', or was set to `*opcodes*'.
1625 * aclocal.m4: Likewise.
1626 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1627 original source of this bit of code. It's not clear what the best fix
1630 start-sanitize-r5900
1631 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1633 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1635 start-sanitize-tic80
1636 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1638 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1639 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1640 offset forms before the 15 bit forms, to default to the long forms.
1643 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1645 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1647 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1649 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1650 symbol if none is present.
1651 (print_insn_big_arm): Prevent examination of stored symbol if
1654 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1656 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1658 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1660 * disassemble.c: Remove disasm_symaddr() function.
1662 * arm-dis.c: Use info->symbol instead of info->flags to determine
1663 if disassmbly should be in Thumb or Arm mode.
1665 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1667 * arm-dis.c: Add support for disassembling Thumb opcodes.
1668 (print_insn_thumb): New function.
1670 * disassemble.c (disasm_symaddr): New function.
1672 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1673 (thumb_opcodes): Table of Thumb opcodes.
1675 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1677 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1679 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1680 and 'v' as operand types.
1682 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1685 <olivier.carmona@di.epfl.ch>.
1686 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1687 which has a two word opcode with a one word argument.
1689 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1691 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1692 unsigned, not signed.
1693 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1695 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1697 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1698 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1699 (ftrv): Slay the cut-and-paste monster.
1701 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1703 * d10v-dis.c (print_operand):
1704 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1706 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1708 * d10v-opc.c (OPERAND_FLAG): Split into:
1709 (OPERAND_FFLAG, OPERAND_CFLAG) .
1713 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1715 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1716 field for all INSN_MACRO's.
1717 * mips16-opc.c: same
1719 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1721 * mips-opc.c (sync,cache): These are 3900 insns.
1723 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1725 sh-opc.h (sh_table): Remove ftst/nan.
1727 start-sanitize-cygnus
1728 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1730 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1731 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1733 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1737 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1739 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1740 Add tx49 insns and configury.
1743 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1745 * mips-opc.c (ffc, ffs): Fix mask.
1747 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1749 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1752 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1754 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1755 start-sanitize-cygnus
1756 Added VR5400 instructions.
1757 (N5): New cpu-id macro.
1759 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1761 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1763 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1764 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1766 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1768 * v850-dis.c (disassemble): Replace // with /* ... */
1770 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1772 * sparc-opc.c: Add wr & rd for v9a asr's.
1773 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1774 (v9a_asr_reg_names): New variable.
1775 Patch from David Miller <davem@vger.rutgers.edu>.
1777 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1779 * sparc-opc.c (v9notv9a): New insn type.
1780 (IMPDEP): Move to the end to not conflict with edge8 et al.
1781 Patch from David Miller <davem@vger.rutgers.edu>.
1783 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1785 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1787 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1789 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1791 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1793 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1794 of disassemble_info structure to determine if an overlay address
1795 has a matching symbol in low memory.
1797 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1798 new symbol_at_address_func field in disassemble_info structure.
1800 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1802 * v850-opc.c (extract_d22): Use signed arithmatic.
1804 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1806 * mips-opc.c: Three op mult is not an ISA insn.
1808 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1810 * mips-opc.c: Fix formatting.
1812 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1814 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1815 than assuming that char is signed. Explicitly sign extend 16 bit
1816 values, rather than assuming that short is 16 bits.
1817 (OP_sI, OP_J, OP_DIR): Likewise.
1819 start-sanitize-v850e
1820 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1822 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1826 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1828 * v850-opc.c: Fix typo in comment.
1830 * v850-dis.c (disassemble): Add test of processor type when
1831 determining opcodes.
1833 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1835 * configure.in: Use a diversion to set enable_shared before the
1836 arguments are parsed.
1837 * configure: Rebuild.
1839 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1841 * m68k-opc.c (TBL1): Use ! rather than `.
1842 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1844 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1846 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1848 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1850 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1853 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1854 * aclocal.m4: Rebuild with new libtool.
1855 * configure: Rebuild.
1857 start-sanitize-v850e
1858 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1860 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1863 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1865 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1867 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1869 * v850-opc.c (v850_opcodes): Further rearrangements.
1871 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1873 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1875 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1877 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1880 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1882 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1884 * mips16-opc.c: Added mips16 sdbbp.
1887 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1889 * v850-opc.c: Initialise processors field of v850_opcode structure.
1891 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1893 Merge changes from Martin Hunt:
1895 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1897 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1898 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1899 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1901 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1903 * d30v-dis.c (print_insn): First operand of d*i (delayed
1904 branch) instructions is relative.
1906 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1907 (d30v_operand_table): Add IMM6S3 type.
1908 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1910 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1911 and cmp instructions.
1913 * d30v-opc.c: Correct entries for repeat*, and sat*.
1914 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1915 types. Correct several formats.
1917 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1919 * d30v-opc.c (pre_defined_registers): Change control registers.
1921 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1922 SHORT_C2. Manual was incorrect.
1924 * d30v-dis.c (lookup_opcode): Return value now indicates
1925 if an opcode has a short and a long form. Used for deciding
1926 to append a ".s" or ".l".
1927 (print_insn): Append a ".s" to an instruction if it is
1928 the short form and ".l" if it is a long form. Do not append
1929 anything if the instruction has only one possible size.
1931 * d30v-opc.c: Change mulx2h to require an even register.
1932 New form: SHORT_A2; a SHORT_A form that needs an even
1933 register as the first operand.
1935 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1936 instruction was not being disassembled if there were an odd
1937 number of instructions.
1939 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1941 start-sanitize-v850e
1942 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1944 * v850-dis.c (disassemble): Improved display of register lists.
1947 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1949 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1950 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1951 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1952 fandnot1s, fandnot2s.
1954 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1956 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1958 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1960 * cgen-asm.c (cgen_parse_address): New argument resultp.
1961 All callers updated.
1962 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1964 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1966 * mn10200-dis.c (disassemble): PC relative instructions are
1967 relative to the next instruction, not the current instruction.
1969 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1971 * v850-dis.c (disassemble): Only signed extend values that are not
1972 returned by extract functions.
1973 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1975 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1977 * v850-opc.c: Update comments. Remove use of
1978 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1980 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1982 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1984 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1986 * configure: Rebuilt with latest devo autoconf for NT support.
1988 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1990 * v850-dis.c (disassemble): Use curly brace syntax for register
1993 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1994 where r0 is being used as a destination register.
1996 start-sanitize-v850e
1997 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1999 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2002 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2004 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2005 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2006 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2007 Add insns to access SGR and DBR.
2008 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2010 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2012 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2014 start-sanitize-v850e
2015 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2017 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2018 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2021 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2023 * configure (cgen_files): Add support for v850e target.
2024 * configure.in (cgen_files): Add support for v850e target.
2026 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2028 * configure (cgen_files): Add support for v850ea target.
2029 * configure.in (cgen_files): Add support for v850ea target.
2032 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2034 * configure.in (bfd_arc_arch): Add.
2035 * configure: Rebuild.
2036 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2037 * Makefile.in: Rebuild.
2038 * arc-dis.c, arc-opc.c: New files.
2039 * disassemble.c (ARCH_all): Define ARCH_arc.
2040 (disassembler): Add ARC support.
2042 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2044 start-sanitize-v850e
2045 * v850-dis.c (disassemble): Add support for v850EA instructions.
2047 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2048 (v850_opcodes): Add v850EA instructions.
2050 * v850-dis.c (disassemble): Add support for v850E instructions.
2052 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2053 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2054 insert_spe, extract_spe): New Functions.
2055 (v850_opcodes): Add v850E instructions.
2058 * v850-opc.c: Reorganised and re-layed out to improve readability
2061 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2063 * configure: Rebuild with autoconf 2.12.1.
2065 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2067 * aclocal.m4, configure: Rebuild with new automake patches.
2069 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2071 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2072 * acinclude.m4: Just include acinclude.m4 from BFD.
2073 * aclocal.m4, configure: Rebuild.
2075 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2077 * Makefile.am: New file, based on old Makefile.in.
2078 * acconfig.h: New file.
2079 * acinclude.m4: New file.
2080 * stamp-h.in: New file.
2081 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2082 Removed shared library handling; now handled by libtool. Replace
2083 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2084 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2085 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2086 handling in AC_OUTPUT.
2087 * dep-in.sed: Change .o to .lo.
2088 * Makefile.in: Now built with automake.
2089 * aclocal.m4: Now built with aclocal.
2090 * config.in, configure: Rebuild.
2092 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2094 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2096 start-sanitize-r5900
2097 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2099 * mips-opc.c: Fix coding of mtsa.
2102 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2104 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2106 * sparc-dis.c (sorted_opcodes): New static local.
2107 (struct opcode_hash): `opcode' is pointer to const element.
2108 (build_hash): First arg is now table of sorted pointers.
2109 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2110 (compare_opcodes): Update.
2112 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2114 * cgen-opc.c: #include <ctype.h>.
2115 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2116 Handle case insensitive hashing.
2117 (hash_keyword_value): Change type of `value' to unsigned int.
2119 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2121 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2122 precision FP, mark it as such. Likewise for double precision
2123 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2125 start-sanitize-r5900
2126 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2129 start-sanitize-r5900
2130 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2132 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2133 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2136 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2138 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2140 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2141 nesting depth when all the macros are expanded.
2143 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2145 * sparc-opc.c: The fcmp v9a instructions take an integer register
2146 as a destination, not a floating point register. From Christian
2147 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2149 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2151 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2152 syntax. From Roman Hodek
2153 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2155 * i386-dis.c (twobyte_has_modrm): Fix pand.
2157 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2159 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2161 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2163 * arm-dis.c: Add prototypes for arm_decode_shift and
2166 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2168 * mips-opc.c: Add r3900 insns.
2170 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2172 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2173 print delay slot instructions on the same line. When using a PC
2174 relative load, add a comment with the value being loaded if it can
2177 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2179 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2180 to pushS/popS for segment regs and byte constant so that
2181 pushw/popw printed when in 16 bit data mode.
2183 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2184 print cbtw, cwtd in 16 bit data mode.
2185 * i386-dis.c (putop): extra case W to support above.
2187 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2188 address size prefix in 16 bit address mode.
2190 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2192 * sh-dis.c: Reindent. Rename local variable fprintf to
2195 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2197 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2199 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2201 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2203 * mips16-opc.c (mip16_opcodes): same.
2205 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2207 * m68k-opc.c (moveb): Change $d to %d.
2209 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2211 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2212 (twobyte_has_modrm): Likewise.
2214 (OP_MMX, OP_EM, OP_MS): New static functions.
2216 * i386-dis.c: Revert patch of April 4. The output now matches
2219 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2221 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2224 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2226 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2228 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2230 * Makefile.in (install): Depend upon installdirs.
2231 (installdirs): New target.
2233 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2235 From Thomas Graichen <graichen@rzpd.de>:
2236 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2237 * configure: Rebuild.
2239 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2241 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2242 Delete string{,s}.h support.
2244 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2246 * cgen-asm.c (cgen_parse_operand_fn): New global.
2247 (cgen_parse_{{,un}signed_integer,address}): Update call to
2248 cgen_parse_operand_fn.
2249 (cgen_init_parse_operand): New function.
2250 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2251 from cgen_asm_init_parse.
2252 (m32r_cgen_assemble_insn): New operand `errmsg'.
2253 Delete call to as_bad, return error message to caller.
2254 (m32r_cgen_asm_hash_keywords): #if 0 out.
2256 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2258 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2260 [case 'J']: Fix typo in register name.
2262 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2264 * configure.in: Substitute SHLIB_LIBS.
2265 * configure: Rebuild.
2266 * Makefile.in (SHLIB_LIBS): New variable.
2267 ($(SHLIB)): Use $(SHLIB_LIBS).
2269 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2271 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2273 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2275 * disassemble.c (disassembler): Handle m32r.
2277 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2279 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2280 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2281 * Makefile.in (CFILES): Add them.
2282 (ALL_MACHINES): Add them.
2283 (dependencies): Regenerate.
2284 * configure.in (cgen_files): New variable.
2285 (bfd_m32r_arch): Add entry.
2286 * configure: Regenerate.
2288 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2290 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2291 * configure: Rebuild.
2293 * Makefile.in: Rebuild dependencies.
2295 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2297 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2300 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2302 * Branched binutils 2.8.
2304 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2306 * m10200-dis.c: Rename from mn10200-dis.c.
2307 * m10200-opc.c: Rename from mn10200-opc.c.
2308 * m10300-dis.c: Rename from mn10300-dis.c
2309 * m10300-opc.c: Rename from mn10300-opc.c.
2310 * Makefile.in: Update accordingly.
2312 * mips16-opc.c: Add mul and dmul macros.
2314 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2316 * makefile.vms: Update CFLAGS, add clean target.
2318 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2320 * mips-opc.c: Add "wait". From Ralf Baechle
2321 <ralf@gnu.ai.mit.edu>.
2323 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2324 * configure, config.in: Rebuild.
2325 * sysdep.h: Include <stdlib.h> if it exists.
2326 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2328 * Makefile.in: Rebuild dependencies.
2330 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2332 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2333 Andrew Bray <andy@madhouse.demon.co.uk>.
2335 * mips-opc.c: Add cast when setting mips_opcodes.
2337 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2339 * v850-dis.c (disassemble): Fix sign extension problem.
2340 * v850-opc.c (extract_d*): Fix sign extension problems to make
2341 disassembly calculate branch offsets correctly.
2343 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2345 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2347 * mips-opc.c: Add dctr and dctw.
2349 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2351 * d30v-dis.c (print_insn): Change the way signed constants
2354 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2356 * Makefile.in (BFD_H): New variable.
2357 (HFILES): New variable.
2358 (CFILES): Add all C files.
2359 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2360 Delete old dependencies, and build new ones.
2361 * dep-in.sed: New file.
2363 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2365 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2367 start-sanitize-coldfire
2368 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2370 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2373 end-sanitize-coldfire
2374 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2376 * mn10200-opc.c: Change "trap" to "syscall".
2377 * mn10300-opc.c: Add new "syscall" instruction.
2379 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2381 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2382 mulul insns on the coldfire.
2384 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2386 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2387 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2388 (print_insn_little_arm): Likewise.
2390 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2392 Based on patches from H.J. Lu <hjl@lucon.org>:
2393 * i386-dis.c (fetch_data): Add prototype.
2394 * m68k-dis.c (fetch_data): Add prototype.
2395 (dummy_print_address): Add prototype. Make static.
2396 * ppc-opc.c (valid_bo): Add prototype.
2397 * sparc-dis.c (build_hash_table): Add prototype.
2398 (is_delayed_branch, compute_arch_mask): Add prototypes.
2399 (print_insn_sparc): Make several local variables const.
2400 (compare_opcodes): Change arguments to const PTR. Add prototype.
2401 * sparc-opc.c (arg): Change name field to be const.
2402 (lookup_name, lookup_value): Add prototypes. Change table and
2403 name parameters to be const.
2404 (sparc_encode_asi): Change name parameter to be const.
2405 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2406 (sparc_encode_sparclet_cpreg): Likewise.
2407 (sparc_decode_asi): Change return type to be const.
2408 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2409 (sparc_decode_sparclet_cpreg): Likewise.
2411 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2413 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2414 Solaris doesn't like the combined options, and the -f is
2416 (stamp-tshlink, install): Likewise.
2418 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2420 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2423 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2425 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2427 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2429 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2432 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2434 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2436 start-sanitize-tic80
2437 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2439 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2441 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2443 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2446 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2448 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2449 floatformat_to_double to make portable.
2450 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2453 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2455 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2456 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2458 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2460 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2461 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2463 start-sanitize-tic80
2464 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2466 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2467 (OFF_SL_BR_SCALED): ... to this, and added the flag
2468 TIC80_OPERAND_BASEREL to the flags word.
2469 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2473 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2475 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2476 Change mips_opcodes from const array to a pointer,
2477 and change bfd_mips_num_opcodes from const int to int,
2478 so that we can increase the size of the mips opcodes table
2481 start-sanitize-tic80
2482 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2484 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2485 store BITNUM values in the table in one's complement form
2486 to match behavior when assembler is given a raw numeric
2487 value for a BITNUM operand.
2488 * tic80-dis.c (print_operand_bitnum): Ditto.
2491 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2493 * d30v-opc.c: Removed references to FLAG_X.
2495 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2497 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2499 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2501 * Makefile.in: Added d30v object files.
2502 * configure: (bfd_d30v_arch) Rebuilt.
2503 * configure.in: (bfd_d30v_arch) Added new case.
2504 * d30v-dis.c: New file.
2505 * d30v-opc.c: New file.
2506 * disassemble.c (disassembler) Add entry for d30v.
2508 start-sanitize-tic80
2509 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2511 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2512 representations for the floating point BITNUM values.
2514 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2516 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2517 in the table in one's complement form, as they appear in the
2519 (tic80_symbol_to_value): Use macros to access predefined
2521 (tic80_value_to_symbol): Ditto.
2522 (tic80_next_predefined_symbol): New function.
2523 * tic80-dis.c (print_operand_bitnum): Remove code that did
2524 one's complement for BITNUM values.
2527 start-sanitize-r5900
2528 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2530 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2533 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2535 * makefile.vms: Remove 8 bit characters. Update to latest
2538 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2540 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2542 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2544 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2545 (IMM24_PCREL): Likewise.
2547 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2549 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2550 address for an extended PC relative instruction that is not a
2553 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2555 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2558 start-sanitize-tic80
2559 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2561 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2562 (tic80_opcodes): Sort entries so that long immediate forms
2563 come after short immediate forms, making it easier for
2564 assembler to select the right one for a given operand.
2567 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2569 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2571 (print_insn_mips16): Likewise.
2573 start-sanitize-r5900
2574 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2576 * mips-opc.c: add r5900.
2579 start-sanitize-tic80
2580 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2582 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2583 a symbol class that restricts translation to just that
2584 class (general register, condition code, etc).
2586 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2588 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2589 and REG_DEST_E for register operands that have to be
2590 an even numbered register. Add REG_FPA for operands that
2591 are one of the floating point accumulator registers.
2592 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2593 (tic80_opcodes): Change entries that need even numbered
2594 register operands to use the new operand table entries.
2595 Add "or" entries that are identical to "or.tt" entries.
2598 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2600 * mips16-opc.c: Add new cases of exit instruction for
2602 * mips-dis.c (print_mips16_insn_arg): Display floating point
2603 registers in operands of exit instruction. Print `$' before
2604 register names in operands of entry and exit instructions.
2606 start-sanitize-tic80
2607 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2609 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2610 pairs for all predefined symbols recognized by the assembler.
2611 Also used by the disassembling routines.
2612 (tic80_symbol_to_value): New function.
2613 (tic80_value_to_symbol): New function.
2614 * tic80-dis.c (print_operand_control_register,
2615 print_operand_condition_code, print_operand_bitnum):
2616 Remove private tables and use tic80_value_to_symbol function.
2619 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2621 * d10v-dis.c (print_operand): Change address printing
2622 to correctly handle PC wrapping. Fixes PR11490.
2624 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2626 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2629 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2631 * mips-dis.c (print_insn_mips16): Set insn_info information.
2632 (print_mips16_insn_arg): Likewise.
2634 * mips-dis.c (print_insn_mips16): Better handling of an extend
2635 opcode followed by an instruction which can not be extended.
2637 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2639 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2640 coldfire moveb instruction to not allow an address register as
2641 destination. Although the documentation does not indicate that
2642 this is invalid, experiments uncovered unexpected behavior.
2643 Added a comment explaining the situation. Thanks to Andreas
2644 Schwab for pointing this out to me.
2646 start-sanitize-tic80
2647 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2649 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2650 entries are presorted so that entries with the same mnemonic are
2651 adjacent to each other in the table. Sort the entries for each
2652 instruction so that this is true.
2655 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2657 * m68k-dis.c: Include <libiberty.h>.
2658 (print_insn_m68k): Sort the opcode table on the most significant
2659 nibble of the opcode.
2661 start-sanitize-tic80
2662 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2664 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2665 "vsub", "vst", "xnor", and "xor" instructions.
2666 (V_a1): Renamed from V_a, msb of accumulator reg number.
2667 (V_a0): Add macro, lsb of accumulator reg number.
2669 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2671 * tic80-dis.c (print_insn_tic80): Broke excessively long
2672 function up into several smaller ones and arranged for
2673 the instruction printing function to be callable recursively
2674 to print vector instructions that have both a load and a
2675 math instruction packed into a single opcode.
2676 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2677 to explain why it comes after the other vector opcodes.
2680 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2682 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2683 move insns to handle immediate operands.
2685 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2687 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2688 fix operand mask in the "moveml" entries for the coldfire.
2690 start-sanitize-tic80
2691 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2693 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2694 New macros for building vector instruction opcodes.
2695 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2696 FMT_LI, which were unused. The field is now a flags field.
2697 Remove some opcodes that are possible, but illegal, such
2698 as long immediate instructions with doubles for immediate
2699 values. Add "vadd" and "vld" instructions.
2701 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2703 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2704 the order more logical. Move the shift alias instructions ("rotl",
2705 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2706 interspersed with the regular sr.x and sl.x instructions. Add
2707 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2708 "sub", "subu", "swcr", and "trap".
2710 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2712 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2713 (OFF_SL_PC): Renamed from OFF_SL.
2714 (OFF_SS_BR): New operand type for base relative operand.
2715 (OFF_SL_BR): New operand type for base relative operand.
2716 (REG_BASE): New operand type for base register operand.
2717 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2718 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2719 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2721 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2722 10 char field, padded with spaces on rhs, rather than a string
2723 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2724 than old TIC80_OPERAND_RELATIVE. Add support for new
2725 TIC80_OPERAND_BASEREL flag bit.
2727 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2729 * tic80-dis.c (print_insn_tic80): Print floating point operands
2731 * tic80-opc.c (SPFI): Add single precision floating point
2732 immediate operand type.
2733 (ROTATE): Add rotate operand type for shifts.
2734 (ENDMASK): Add for shifts.
2735 (n): Macro for the 'n' bit.
2736 (i): Macro for the 'i' bit.
2737 (PD): Macro for the 'PD' field.
2738 (P2): Macro for the 'P2' field.
2739 (P1): Macro for the 'P1' field.
2740 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2744 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2746 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2747 adding in current address for pc-relative operands.
2749 start-sanitize-tic80
2750 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2752 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2753 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2754 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2755 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2756 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2757 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2758 (REG_SCALED, LSI_SCALED): New operand types.
2759 (E): New macro for 'E' bit at bit 27.
2760 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2761 opcodes, including the various size flavors (b,h,w,d) for
2762 the direct load and store instructions.
2764 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2766 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2768 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2769 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2770 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2771 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2772 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2773 masks with "MASK_* & ~M_*" to get the M bit reset.
2774 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2776 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2778 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2779 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2780 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2782 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2783 CC, SICR, and LICR table entries.
2784 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2785 "bcnd", and "brcr" opcodes.
2788 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2790 * ppc-opc.c (powerpc_operands): Make comment match the
2791 actual fields (no shift field).
2792 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2793 start-sanitize-tic80
2794 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2795 partial implementation, work in progress.
2796 * tic80-opc.c (tic80_operands): Begin construction operands table.
2797 (tic80_opcodes): Continue populating opcodes table and start
2798 filling in the operand indices.
2799 (tic80_num_opcodes): Add this.
2802 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2804 * m68k-opc.c: Add #B case for moveq.
2806 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2808 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2809 before they are used.
2811 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2813 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2814 for "breakpoint" instruction.
2816 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2818 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2819 (dep): Use ALL_CFLAGS rather than CFLAGS.
2821 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2823 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2826 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2828 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2829 start-sanitize-tic80
2830 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2833 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2835 * mips16-opc.c: Add "abs".
2837 start-sanitize-tic80
2838 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2840 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2841 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2842 (disassembler): Add bfd_arch_tic80 support to set disassemble
2843 to print_insn_tic80.
2844 * tic80-dis.c (print_insn_tic80): Add stub.
2846 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2848 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2849 * configure: Regenerate with autoconf.
2850 * tic80-dis.c: Add file.
2851 * tic80-opc.c: Add file.
2854 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2856 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2858 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2860 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2861 (mn10200_opcodes): Use it for some logicals and btst insns.
2862 Add "break" and "trap" instructions.
2864 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2866 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2868 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2870 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2871 relative load or add now depends upon whether the instruction is
2874 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2876 * mn10200-dis.c: Finish writing disassembler.
2877 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2878 Fix mask for "jmp (an)".
2880 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2881 handle endianness issues for mn10300.
2883 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2885 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2887 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2888 instruction. Fix opcode field for "movb (imm24),dn".
2890 * mn10200-opc.c (mn10200_operands): Fix insertion position
2893 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2895 * mn10200-opc.c: Create mn10200 opcode table.
2896 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2897 but moving along nicely.
2899 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2901 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2903 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2905 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2906 specifiers for fmovem* instructions.
2908 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2910 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2912 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2914 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2917 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2919 * mn10300-opc.c: Add some comments explaining the various
2922 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2924 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2926 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2929 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2930 operand specifiers in fmovm* instructions.
2932 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2934 * ppc-opc.c (insert_li): Give an error if the offset has the two
2935 least significant bits set.
2937 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2939 * mips-dis.c (print_insn_mips16): Separate the instruction from
2940 the arguments with a tab, not a space.
2942 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2944 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2947 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2950 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2952 * configure: Rebuild with autoconf 2.12.
2954 Add support for mips16 (16 bit MIPS implementation):
2955 * mips16-opc.c: New file.
2956 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2957 (mips16_reg_names): New static array.
2958 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2959 after seeing a 16 bit symbol.
2960 (print_insn_little_mips): Likewise.
2961 (print_insn_mips16): New static function.
2962 (print_mips16_insn_arg): New static function.
2963 * mips-opc.c: Add jalx instruction.
2964 * Makefile.in (mips16-opc.o): New target.
2965 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2966 * configure: Rebuild.
2968 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2970 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2971 operand specifiers in *save, *restore and movem* instructions.
2973 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2976 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2977 register operands for immediate arithmetic, not, neg, negx, and
2978 set according to condition instructions.
2980 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2981 specifier of the effective-address operand in immediate forms of
2982 arithmetic instructions. The specifier for the immediate operand
2983 notes how and where the constant will be stored.
2985 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2987 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2990 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2993 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2995 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2997 * mn10300-dis.c (disassemble): Handle register lists.
2999 * mn10300-opc.c: Fix handling of register list operand for
3000 "call", "ret", and "rets" instructions.
3002 * mn10300-dis.c (disassemble): Print PC-relative and memory
3003 addresses symbolically if possible.
3004 * mn10300-opc.c: Distinguish between absolute memory addresses,
3005 pc-relative offsets & random immediates.
3007 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3009 (disassemble): Handle SPLIT and EXTENDED operands.
3011 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3013 * mn10300-dis.c: Rough cut at printing some operands.
3015 * mn10300-dis.c: Start working on disassembler support.
3016 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3018 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3020 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3022 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3024 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3026 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3029 register argument is calls and jmp instructions.
3031 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3034 getx operand. Fix opcode for mulqu imm,dn.
3036 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3038 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3039 in MN10300_OPERAND_SPLIT operands for how many bits
3040 appear in the basic insn word. Add IMM32_HIGH24,
3041 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3042 (mn10300_opcodes): Use new operands as needed.
3044 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3045 for bset, bclr, btst instructions.
3046 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3048 * mn10300-opc.c (mn10300_operands): Remove many redundant
3049 operands. Update opcode table as appropriate.
3050 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3051 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3053 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3055 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3056 operands (for indexed load/stores). Fix bitpos for DI
3057 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3058 few instructions that insert immediates/displacements in the
3059 middle of the instruction. Add IMM8E for 8 bit immediate in
3060 the extended part of an instruction.
3061 (mn10300_operands): Use new opcodes as appropriate.
3063 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3065 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3066 sequential so the assembler never parallelizes it with
3069 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3071 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3072 a data/address register that appears in register field 0
3073 and register field 1.
3074 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3076 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3078 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3079 standard disassembly.
3081 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3082 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3083 Recategorize PALcode instructions.
3085 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3087 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3089 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3091 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3092 there are no operand types.
3094 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3098 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3100 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3102 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3104 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3106 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3107 and sst.w instructions.
3109 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3112 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3114 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3117 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3119 * ppc-opc.c (PPCPWR2): Define.
3120 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3123 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3125 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3126 field for movhu instruction.
3128 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3129 cast value to "long" not "signed long" to keep hpux10
3132 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3134 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3137 * mn10300-opc.c (FMT*): Remove definitions.
3139 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3140 for shift-by-register opcodes.
3142 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3143 into [AD][MN][01] for encoding the position of the register
3146 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3148 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3149 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3151 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3153 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3154 Fix various typos. Add "PAREN" operand.
3155 (MEM, MEM2): Define.
3156 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3157 operands. Fix several typos.
3159 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3162 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3164 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3165 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3167 (mn10300_opcodes): Break opcode format out into its own field.
3168 Update many operand fields to deal with signed vs unsigned
3169 issues. Fix one or two typos in the "mov" instruction
3170 opcode, mask and/or operand fields.
3172 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3174 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3175 m68851 wasn't reset.
3177 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3179 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3180 all opcodes. Very rough cut at operands for all opcodes.
3182 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3185 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3187 * mn10200-opc.c, mn10300-opc.c: New files.
3188 * mn10200-dis.c, mn10300-dis.c: New files.
3189 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3190 * disassemble.c: Break mn10x00 support into 10200 and 10300
3192 * configure.in: Likewise.
3193 * configure: Rebuilt.
3195 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3197 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3199 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3201 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3203 * disassemble (ARCH_mn10x00): Define.
3204 (disassembler): Handle bfd_arch_mn10x00.
3205 * configure.in: Recognize bfd_mn10x00_arch.
3206 * configure: Rebuilt.
3208 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3210 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3211 accordingly. Don't declare functions using op_rtn.
3213 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3215 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3216 params to be more standard.
3217 * (disassemble): Print absolute addresses and symbolic names for
3218 branch and jump targets.
3219 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3221 * (v850_opcodes): Add breakpoint insn.
3223 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3225 * m68k-opc.c: Move the fmovemx data register cases before the
3226 other cases, so that they get recognized before the data register
3227 does gets treated as a degenerate register list.
3229 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * mips-opc.c: Add a case for "div" and "divu" with two registers
3232 and a destination of $0.
3234 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3236 * mips-dis.c (print_insn_arg): Add prototype.
3237 (_print_insn_mips): Ditto.
3239 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3241 * mips-dis.c (print_insn_arg): Print condition code registers as
3244 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3246 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3248 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3250 * v850-dis.c (disassemble): Make static. Provide prototype.
3252 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3254 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3257 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3259 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3260 ']' characters into the output stream.
3261 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3262 Add "memop" field to all opcodes (for the disassembler).
3263 Reorder opcodes so that "nop" comes before "mov" and "jr"
3264 comes before "jarl".
3266 * v850-dis.c (print_insn_v850): Fix typo in last change.
3268 * v850-dis.c (print_insn_v850): Properly handle disassembling
3269 a two byte insn at the end of a memory region when the memory
3270 region's size is only two byte aligned.
3272 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3274 * v850-dis.c (v850_reg_names): Define.
3275 (v850_sreg_names, v850_cc_names): Likewise.
3276 (disassemble): Very rough cut at printing operands (unformatted).
3278 * v850-opc.c (BOP_MASK): Fix.
3279 (v850_opcodes): Fix mask for jarl and jr.
3281 * v850-dis.c: New file. Skeleton for disassembler support.
3282 * Makefile.in Remove v850 references, they're not needed here.
3283 * configure.in: Add v850-dis.o when building v850 toolchains.
3284 * configure: Rebuilt.
3285 * disassemble.c (disassembler): Call v850 disassembler.
3287 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3288 (insert_d8_6, extract_d8_6): New functions.
3289 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3290 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3292 (IF4A, IF4B): Use "D7" instead of "D7S".
3293 (IF4C, IF4D): Use "D8_7" instead of "D8".
3294 (IF4E, IF4F): New. Use "D8_6".
3295 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3296 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3298 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3299 (v850_operands): Change D16 to D16_15, use special insert/extract
3300 routines. New new D16 that uses the generic insert/extract code.
3301 (IF7A, IF7B): Use D16_15.
3302 (IF7C, IF7D): New. Use D16.
3303 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3305 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3306 message. Issue an error if the branch offset is odd.
3308 * v850-opc.c: Add notes about needing special insert/extract
3309 for all the load/store insns, except "ld.b" and "st.b".
3311 * v850-opc.c (insert_d22, extract_d22): New functions.
3312 (v850_operands): Use insert_d22 and extract_d22 for
3314 (insert_d9): Fix range check.
3316 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3318 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3319 and set bits field to D9 and D22 operands.
3321 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3323 * v850-opc.c (v850_operands): Define SR2 operand.
3324 (v850_opcodes): "ldsr" uses R1,SR2.
3326 * v850-opc.c (v850_opcodes): Fix opcode specs for
3327 sld.w, sst.b, sst.h, sst.w, and nop.
3329 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3331 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3332 end of the opcode table.
3334 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3336 * d10v-opc.c (pre_defined_registers): Added register pairs,
3337 "r0-r1", "r2-r3", etc.
3339 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3341 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3342 Create I16U for an unsigned 16bit mmediate operand.
3343 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3345 * v850-opc.c (v850_operands): Define EP operand.
3346 (IF4A, IF4B, IF4C, IF4D): Use EP.
3348 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3349 with immediate operand, "movhi". Tweak "ldsr".
3351 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3352 correct. Get sld.[bhw] and sst.[bhw] closer.
3354 * v850-opc.c (v850_operands): "not" is a two byte insn
3356 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3358 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3360 * v850-opc.c (two): Get order of words correct.
3362 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3364 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3365 register source and destination operands.
3366 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3368 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3369 same thinko in "trap" opcode.
3371 * v850-opc.c (v850_opcodes): Add initializer for size field
3374 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3375 Add D8 for 8-bit unsigned field in short load/store insns.
3376 (IF4A, IF4D): These both need two registers.
3377 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3378 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3379 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3380 for "ldsr" and "stsr".
3381 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3384 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3385 short store word (sst.w).
3387 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3389 * v850-opc.c (v850_operands): Added insert and extract fields,
3390 pointers to functions that handle unusual operand encodings.
3392 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3394 * v850-opc.c (v850_opcodes): Enable "trap".
3396 * v850-opc.c (v850_opcodes): Fix order of displacement
3397 and register for "set1", "clr1", "not1", and "tst1".
3399 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3401 * v850-opc.c (v850_operands): Add "B3" support.
3402 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3405 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3407 * v850-opc.c: Close unterminated comment.
3409 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3411 * v850-opc.c (v850_operands): Add flags field.
3412 (v850_opcodes): add move opcodes.
3414 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3416 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3417 * configure: (bfd_v850v_arch) Add new case.
3418 * configure.in: (bfd_v850_arch) Add new case.
3419 * v850-opc.c: New file.
3421 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3423 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3425 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3427 * d10v-opc.c: Add additional information to the opcode
3428 table to help determinine which instructions can be done
3431 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3433 * mpw-make.sed: Update editing of include pathnames to be
3436 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3438 * arm-opc.h: Added "bx" instruction definition.
3440 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3442 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3444 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3446 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3448 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3450 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3452 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3454 * makefile.vms: Update for alpha-opc changes.
3456 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3458 * i386-dis.c (print_insn_i386): Actually return the correct value.
3459 (ONE, OP_ONE): #ifdef out; not used.
3461 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3463 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3464 Changed subi operand type to treat 0 as 16.
3466 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3468 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3471 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3473 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3474 memory transfer instructions. Add new format string entries %h and %s.
3475 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3478 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3480 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3481 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3483 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3485 * alpha-dis.c (print_insn_alpha_osf): Remove.
3486 (print_insn_alpha_vms): Remove.
3487 (print_insn_alpha): Make globally visible. Chose the register
3488 names based on info->flavour.
3489 * disassemble.c: Always return print_insn_alpha for the alpha.
3491 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3493 * d10v-dis.c (dis_long): Handle unknown opcodes.
3495 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3497 * d10v-opc.c: Changes to support signed and unsigned numbers.
3498 All instructions with the same name that have long and short forms
3499 now end in ".l" or ".s". Divs added.
3500 * d10v-dis.c: Changes to support signed and unsigned numbers.
3502 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3504 * d10v-dis.c: Change all functions to use info->print_address_func.
3506 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3508 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3509 move ccr/sr insns more strict so that the disassembler only
3510 selects them when the addressing mode is data register.
3512 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3513 * d10v-opc.c (pre_defined_registers): Declare.
3514 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3515 to pick a better name for the registers.
3517 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3519 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3520 operands for fexpand and fpmerge. From Christian Kuehnke
3521 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3523 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3525 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3526 print routine. Take new regnames and cpumask arguments.
3527 Kill the environment variable nonsense.
3528 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3529 (print_insn_alpha_vms): New function. Do VMS style regnames.
3530 * disassemble.c (disassembler): Test bfd flavour to pick
3531 between OSF and VMS routines. Default to OSF.
3533 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3535 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3536 * configure: Rebuild.
3537 * Makefile.in (install): Use @INSTALL_SHLIB@.
3539 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3541 * configure: (bfd_d10v_arch) Add new case.
3542 * configure.in: (bfd_d10v_arch) Add new case.
3543 * d10v-dis.c: New file.
3544 * d10v-opc.c: New file.
3545 * disassemble.c (disassembler) Add entry for d10v.
3547 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3549 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3550 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3552 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3554 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3555 distinguish between variants of the instruction set.
3556 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3557 distinguish between variants of the instruction set.
3559 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3561 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3562 the 8086 instruction set.
3563 * i386-dis.c: General cleanups. Make most things static. Add
3564 prototypes. Get rid of static variables aflags and dflags. Pass
3565 them as args (to almost everything).
3567 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3569 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3571 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3573 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3574 if the next arg is marked with SRC_IN_DST. Gross.
3576 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3577 we're looking for and find EXR.
3579 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3580 if we're looking for KBIT and we don't find it.
3582 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3585 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3586 3bit immediate operands.
3588 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3590 * Released binutils 2.7.
3592 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3593 <kkaempf@progis.ac-net.de>.
3595 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3597 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3599 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3601 * sparc-dis.c (print_insn_sparclite): New routine to print
3602 sparclite instructions.
3604 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3606 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3608 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3610 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3611 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3612 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3614 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3616 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3617 Use autoconf-set values.
3618 (docdir, oldincludedir): Removed.
3619 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3621 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3623 * alpha-opc.c: New file.
3624 * alpha-opc.h: Remove.
3625 * alpha-dis.c: Complete rewrite to use new opcode table.
3626 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3627 * configure: Rebuild with autoconf 2.10.
3628 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3629 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3631 (alpha-opc.o): New target.
3633 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3635 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3636 Set imm_added_to_rs1 even if the source and destination register
3639 * sparc-opc.c: Add some two operand forms of the wr instruction.
3641 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3643 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3646 * disassemble.c (disassembler): Handle H8/S.
3647 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3649 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3651 * sparc-opc.c: Add beq/teq as aliases for be/te.
3653 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3654 <sergei@msil.sps.mot.com>.
3656 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3658 * makefile.vms: New file.
3660 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3662 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3664 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3667 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3669 * i386-dis.c (OP_OFF): Call append_prefix.
3671 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3673 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3674 unsigned long to silence a warning from the Solaris PowerPC
3677 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3679 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3681 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3683 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3685 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3686 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3687 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3688 cpush, cpusha, cpull sparclet insns.
3690 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3692 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3694 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3696 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3697 Set F_FLOAT on other floating point instructions.
3699 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3701 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3703 (powerpc_opcodes): Add 860/821 specific SPRs.
3705 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3707 * configure.in: Permit --enable-shared to specify a list of
3708 directories. Set and substitute BFD_PICLIST.
3709 * configure: Rebuild.
3710 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3711 uses. Set to @BFD_PICLIST@.
3713 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3715 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3716 not "abs", which may be needed for the absolute in something
3717 like btst #0,@10:8. Print L_3 immediates separately from other
3718 immediates. Change ABSMOV reference to ABS8MEM.
3720 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3722 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3723 (current_arch_mask): New static global.
3724 (compute_arch_mask): New static function.
3725 (print_insn_sparc): Delete sparc_v9_p. New static local
3726 current_mach. Resort opcode table if current_mach changes.
3727 Generalize "insn not supported" test.
3728 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3729 Delete test for v9/!v9.
3730 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3732 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3733 (brfcx): Renamed to FBRX.
3734 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3735 coprocessor mnemonics are not supported on the sparclet).
3736 (condf): Renamed to CONDF.
3737 (SLCBCC2): Delete F_ALIAS flag.
3739 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3741 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3742 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3744 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3746 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3747 that the shared library version number is set correctly.
3749 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3751 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3752 Miles Bader <miles@gnu.ai.mit.edu>.
3753 * configure: Rebuild.
3755 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3757 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3760 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3762 * configure: Rebuild with autoconf 2.8.
3764 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3766 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3767 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3769 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3771 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3772 since they appear as targets in Makefile.in.
3773 * configure: Rebuild.
3775 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3777 * mpw-make.sed: Edit out shared library support bits.
3779 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3781 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3782 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3783 (sparc_opcodes): Add sparclet insns.
3784 (sparclet_cpreg_table): New static local.
3785 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3786 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3788 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3790 * i386-dis.c (index16): New static variable.
3791 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3793 (OP_indirE): Return result of OP_E.
3794 (OP_E): Check for 16 bit addressing mode, and disassemble
3795 correctly. Optimised 32 bit case a little. Don't print
3796 "(base,index,scale)" when sib specifies only an offset.
3798 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3800 * configure.in: Set and substitute SHLIB_DEP.
3801 * configure: Rebuild.
3802 * Makefile.in (SHLIB_DEP): New variable.
3803 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3804 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3805 COMMON_SHLIB, add them to piclist with appropriate modifications.
3806 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3807 here: just use piclist.
3809 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3811 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3812 (print_insn_sparc): Rewrite v9/not-v9 tests.
3813 (compare_opcodes): Likewise.
3814 * sparc-opc.c (MASK_<ARCH>): Define.
3815 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3816 (sparclet,v6notv9): Define.
3817 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3818 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3820 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3822 * configure.in: Call AC_PROG_CC before configure.host.
3823 * configure: Rebuild.
3825 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3827 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3829 * i386-dis.c (onebyte_has_modrm): New static array.
3830 (twobyte_has_modrm): New static array.
3831 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3833 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3835 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3838 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3840 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3843 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3845 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3846 m68010up, not just m68020up | cpu32.
3848 * Makefile.in (SONAME): New variable.
3849 ($(SHLINK)): Make a link to the transformed name, as well.
3850 (stamp-tshlink): New target.
3851 (install): Skip stamp-tshlink during install.
3853 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3855 * configure.in: Call AC_ARG_PROGRAM.
3856 * configure: Rebuild.
3857 * Makefile.in (program_transform_name): New variable.
3858 (install): Transform library name before installing it.
3860 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3862 * i960-dis.c (mem): Add HX dcinva instruction.
3864 Support for building as a shared library, based on patches from
3865 Alan Modra <alan@spri.levels.unisa.edu.au>:
3866 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3867 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3868 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3869 * configure: Rebuild.
3870 * Makefile.in (ALLLIBS): New variable.
3871 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3872 (COMMON_SHLIB, SHLINK): New variables.
3873 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3874 (STAGESTUFF): Remove variable.
3875 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3876 (stamp-piclist, piclist): New targets.
3877 ($(SHLIB), $(SHLINK)): New targets.
3878 ($(OFILES)): Depend upon stamp-picdir.
3879 (disassemble.o): Build twice if PICFLAG is set.
3880 (MOSTLYCLEAN): Add pic/*.o.
3881 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3882 (distclean): Remove pic and stamp-picdir.
3883 (install): Install shared libraries.
3884 (stamp-picdir): New target.
3886 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3888 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3889 Print unknown instruction as "unknown", rather than in hex.
3891 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3893 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3895 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3897 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3899 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3901 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3902 when necessary. From Ulrich Drepper
3903 <drepper@myware.rz.uni-karlsruhe.de>.
3905 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3907 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3908 sparc_num_opcodes. Update architecture enum values.
3909 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3910 (sparc_opcode_lookup_arch): New function.
3911 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3912 (sparc_opcodes): Add v9a shutdown insn.
3914 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3916 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3917 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3919 (print_insn_sparc64): Deleted.
3920 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3923 * sparc-opc.c (architecture_pname): Add v9a.
3925 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3927 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3928 incorrectly defined as 0x16 when it should be 0x15.
3929 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3930 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3931 excb (exception barrier) which is defined in the Alpha
3932 Architecture Handbook version 2.
3933 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3934 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3935 disassembled as or, for example.
3937 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3939 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3940 (_print_insn_mips): Change i from int to unsigned int.
3942 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3944 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3945 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3947 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3949 * i386-dis.c: Added Pentium Pro instructions.
3951 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3953 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3956 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3958 * sh-opc.h (sh_nibble_type): Added REG_B.
3959 (sh_arg_type): Added A_REG_B.
3960 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3962 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3964 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3966 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3968 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3970 * Makefile.in (distclean): Remove stamp-h. From Ronald
3971 F. Guilmette <rfg@monkeys.com>.
3973 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3975 From David Mosberger-Tang <davidm@azstarnet.com>:
3976 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3979 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3981 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3982 (sh_table): Added many SH3 opcodes.
3983 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3985 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3987 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3988 (subco,subco.): Mark this PPC, not PPCCOM.
3990 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3992 * configure: Rebuild with autoconf 2.7.
3994 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3996 * configure: Rebuild with autoconf 2.6.
3998 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4000 * configure.in: Sort list of architectures. Accept but do nothing
4001 for alliant, convex, pyramid, romp, and tahoe.
4003 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4005 * a29k-dis.c (print_special): Change num to unsigned int.
4007 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4009 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4012 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4014 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4015 * configure: Rebuilt.
4017 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4019 * configure.in: Add case for bfd_i860_arch.
4020 * configure: Rebuild.
4022 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4024 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4025 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4026 (NEXTDOUBLE): Likewise.
4027 (print_insn_m68k): Don't match fmoveml if there is more than one
4028 register in the list.
4029 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4031 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4033 * m68k-opc.c: Use #W rather than #w.
4034 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4036 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4039 and likewise for all the dbxx opcodes.
4041 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4043 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4045 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4047 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4048 the VR4100 specific instructions to the mips_opcodes structure.
4050 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4052 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4053 ugly Metrowerks bug in CW6, is fixed in CW7.
4055 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4057 * ppc-opc.c (whole file): Add flags for common/any support.
4059 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4061 * Makefile.in (BISON): Remove macro.
4062 (FLAGS_TO_PASS): Remove BISON.
4064 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4066 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4068 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4069 instructions that take no args by looking at the match mask.
4070 (print_insn_arg): Always print "%" before register names.
4071 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4072 [case '_']: Don't print "@#" before address.
4073 [case 'J']: Use "%s" as format string, not register name.
4074 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4076 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4078 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4081 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4083 From David Mosberger-Tang <davidm@azstarnet.com>
4085 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4086 (alpha_insn_set): added definitions for VAX floating point
4087 instructions (Unix compilers don't generate these, but handcoded
4088 assembly might still use them).
4090 * alpha-dis.c (print_insn_alpha): added support for disassembling
4091 the miscellaneous instructions in the Alpha instruction set.
4093 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4095 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4096 no longer create sysdep.h, sed ppc-opc.c to work around a
4097 serious Metrowerks C bug.
4098 * mpw-make.in: Remove.
4099 * mpw-make.sed: New file, used by mpw-configure to edit
4100 Makefile.in into an MPW makefile.
4102 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4104 * Makefile.in (maintainer-clean): New synonym for realclean.
4106 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4108 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4109 which use '0', '1', and '2' instead. Specify the proper size for
4110 a pmove immediate operand. Correct the pmovefd patterns to be
4111 moves to a register, not from a register.
4112 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4114 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4116 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4117 %psr, %wim, %tbr as F_NOTV9.
4119 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4121 * Makefile.in (Makefile): Just rebuild Makefile when running
4123 (config.h, stamp-h): New targets.
4124 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4125 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4126 rebuilding config.h.
4127 * configure: Rebuild.
4129 * mips-opc.c: Change unaligned loads and stores with "t,A"
4130 operands to use "t,A(b)".
4132 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4134 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4136 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4138 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4139 until 3 instead of until 2.
4141 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4143 * Makefile.in (ALL_CFLAGS): Define.
4144 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4145 (MOSTLYCLEAN): Add config.log.
4146 (distclean): Don't remove config.log.
4147 * configure.in: Substitute HDEFINES.
4148 * configure: Rebuild.
4150 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4152 * sh-opc.h (sh_arg_type): Add F_FR0.
4153 (sh_table, case fmac): Add F_FR0 as first argument.
4155 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4157 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4159 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4161 * sparc-dis.c: Remove all references to NO_V9.
4163 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4165 * aclocal.m4: Just include ../bfd/aclocal.m4.
4166 * configure: Rebuild.
4168 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4170 * sparc-dis.c (X_DISP19): Define.
4171 (print_insn, case 'G'): Use it.
4172 (print_insn, case 'L'): Sign extend displacement.
4174 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4176 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4177 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4178 host_makefile_frag or frags.
4179 * aclocal.m4: New file.
4180 * configure: Rebuild.
4181 * Makefile.in (INSTALL): Set to @INSTALL@.
4182 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4183 (INSTALL_DATA): Set to @INSTALL_DATA@.
4185 (AR_FLAGS): Set to rc rather than qc.
4186 (CC): Define as @CC@.
4187 (CFLAGS): Set to @CFLAGS@.
4188 (@host_makefile_frag@): Remove.
4189 (config.status): Remove dependency upon @frags@.
4191 * configure.in: ../bfd/config.bfd now just sets shell variables.
4192 Use them rather than looking through target Makefile fragments.
4193 * configure: Rebuild.
4195 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4197 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4199 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4201 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4202 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4205 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4206 (lookup_{name,value}): New functions.
4207 (prefetch_table): New static local.
4208 (sparc_{encode,decode}_prefetch): New functions.
4209 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4211 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4213 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4216 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4218 * sh-dis.c: Correct comment on first line of file.
4220 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4222 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4224 * sparc-opc.c (asi, membar): New static locals.
4225 (sparc_{encode,decode}_{asi,membar}): New functions.
4226 (sparc_opcodes, membar insn): Fix.
4227 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4228 Support decoding of membar masks.
4231 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4233 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4235 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4237 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4238 and likewise for the other branches. Add bhs as an alias for bcc,
4239 and likewise for the size variants. Add dbhs as an alias for
4242 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4244 * sh-opc.h (FP sts instructions): Update to match reality.
4246 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * m68k-dis.c: (fpcr_names): Add % before all register names.
4249 (reg_names): Likewise.
4250 (print_insn_arg): Don't explicitly print % before register names.
4251 Add % before register names in static array names. In case 'r',
4252 print data registers as `@(Dn)', not `Dn@'. When printing a
4253 memory address, don't print @# before it.
4254 (print_indexed): Change base_disp and outer_disp from int to
4255 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4256 syntax. Sign extend 8 byte displacement correctly.
4257 (print_base): Print using MIT syntax. Print zpc when appropriate.
4258 Change parameter disp from int to bfd_vma.
4260 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4263 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4265 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4266 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4267 * sh-opc.h (sh_arg_type): Add new operand types.
4268 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4270 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4272 * Makefile.in (distclean): Remove generated file config.h.
4274 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4276 * Makefile.in (distclean): Remove generated file config.h.
4278 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4280 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4282 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4284 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4285 rather than numopcodes. Use m68k_opcodes rather than removed
4286 opcode function. Don't check F_ALIAS.
4287 (print_insn_arg): Change first parameter to be const char *.
4288 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4289 (m68k-opc.o): New target.
4290 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4291 * configure: Rebuild.
4293 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4295 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4296 (opcode_bits, opcode_hash_table): New variables.
4297 (opcodes_initialized): Renamed from opcodes_sorted.
4298 (build_hash_table): New function.
4299 (is_delayed_branch): Use hash table.
4300 (print_insn): Renamed from print_insn_sparc, made static.
4301 Build and use hash table. If !sparc64, ignore sparc64 insns,
4302 and vice-versa if sparc64.
4303 (print_insn_sparc, print_insn_sparc64): New functions.
4304 (compare_opcodes): Move sparc64 opcodes to end.
4305 Print commutative insns with constant second.
4306 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4308 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4310 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4311 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4312 avoids printing a delay slot in a delay slot.
4313 * sh-opc.h (sh_table): Fully bracket last entry.
4315 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4317 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4319 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4321 * configure.in: Get host_makefile_frag from ${srcdir}.
4323 * configure.in: Autoconfiscated. Check for string[s].h. Create
4324 config.h from config.in. Don't set up sysdep.h link.
4325 * sysdep.h: New file.
4326 * configure, config.in: New files, generated from configure.in.
4327 * Makefile.in: Updated to be processed autoconf-style.
4328 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4329 (Makefile): Depend on config.status.
4330 (config.status): New rule.
4331 * configure.bat: Update Makefile substitutions.
4333 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4335 * mips-opc.c (L1): Define.
4336 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4337 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4340 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4342 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4343 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4344 have multiple add units but only a single logical unit.
4346 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4347 shifted by 18, without any insertion or extraction function.
4348 (insert_cr, extract_cr): Remove.
4350 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4352 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4355 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4357 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4358 * sh-opc.h: Add copyright.
4360 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4362 * Makefile.in (crunch-m68k): Delete extra target accidentally
4363 checked in a while ago.
4365 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4367 * sh-opc.h (sh_table): Add SH3 support.
4369 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4371 * sh-opc.h: Added bsrf and braf.
4373 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4375 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4376 bogus [ls]fm{ea,fd} patterns.
4378 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4379 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4380 initialize it from memory. Make function static.
4381 (print_insn_{big,little}_arm): New functions.
4382 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4383 the correct endianness.
4385 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4387 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4390 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4392 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4393 17th, so that it builds again using GCC as the compiler.
4395 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4397 * mips-dis.c (print_insn_little_mips): Cast return value from
4398 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4399 expects an unsigned long, and that might be fewer words of
4400 argument storage (e.g., if bfd_vma is long long on a 32-bit
4402 (print_insn_big_mips): Likewise with bfd_getb32 value.
4403 (_print_insn_mips): Now static.
4405 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4407 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4408 gcc memory hog problem with initializer is fixed.
4410 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4412 Merge in support for Mac MPW as a host.
4413 (Old change descriptions retained for informational value.)
4415 * mpw-config.in (archname): Compute from the config.
4416 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4418 * mpw-config.in (target_arch): Compute from canonical target.
4419 (m68k, mips, powerpc, sparc): Add architectures.
4420 * mpw-make.in (disassemble.c.o): Add.
4421 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4423 * mpw-config.in (BFD_MACHINES): Set to a default value.
4424 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4426 * mpw-make.in (CSEARCH): Add extra-include to search path.
4428 * mpw-config.in (varargs.h): Don't create.
4429 (sysdep.h): Create using forward-include.
4430 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4432 * mpw-config.in: New file, MPW version of configure.in.
4433 * mpw-make.in: New file, MPW version of Makefile.in.
4435 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4437 * alpha-dis.c (print_insn_alpha): Put empty statement after
4440 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4442 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4443 (low_sign_extend): Likewise.
4444 (get_field): Delete unused function.
4445 (set_field, deposit_14, deposit_21): Likewise.
4447 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4449 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4452 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4454 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4456 * alpha-opc.h (OSF_ASMCODE): define
4457 print pal-code names as defined in App C of the
4458 Alpha Architecture Reference Manual
4460 * alpha-dis.c: cleaned up output
4461 print stylized code forms as defined in App A.4.3 of the
4462 Alpha Architecture Reference Manual
4464 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4466 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4468 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4471 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4473 * m68k-dis.c (opcode): New function. Returns address of opcode
4474 table entry given index, even if the opcode table was split to
4475 work around gcc bugs.
4476 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4478 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4479 (reg_names): Now const.
4480 (print_insn_arg): Arrays cacheFieldName and names now const.
4481 (print_indexed): Array scales now const.
4483 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4485 * ppc-opc.c: Sort recently added instructions by minor opcode
4486 number within major opcode number.
4488 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4490 * hppa-dis.c: Include libhppa.h.
4492 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4494 * mips-opc.c: Change dli to use M_DLI, and add dla.
4496 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4498 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4500 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4502 * mips-opc.c: Add r4650 mul instruction.
4504 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4506 * mips-opc.c: Add uld and usd macros for unaligned double load and
4509 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4511 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4512 mfdcr, mtdcr, icbt, iccci.
4514 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4516 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4517 signed char fields to shorts, more portable.
4519 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4521 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4522 char fields as signed chars, since they may have negative values.
4524 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4526 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4527 (mycroft@netbsd.org).
4529 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4531 From "Logg, Ed" <elogg@ea.com>:
4532 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4533 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4536 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4538 * ppc-opc.c: Changes based on patch from David Edelsohn
4539 <edelsohn@mhpcc.edu>.
4540 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4543 (insert_tbr): New static function.
4544 (extract_tbr): New static function.
4545 (XFXFXM_MASK, XFXM): Define.
4546 (XSPRBAT_MASK, XSPRG_MASK): Define.
4547 (powerpc_opcodes): Add instructions to access special registers by
4548 name. Add mtcr and mftbu.
4550 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4552 * mips-opc.c (P3): Define.
4553 (mips_opcodes): Add mad and madu.
4555 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4557 * configure.in: Add W65 support.
4558 * disassemble.c: Likewise.
4559 * w65-opc.h, w65-dis.c: New files.
4561 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4563 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4566 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4568 * mips-opc.c: Add dli as a synonym for li.
4570 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4572 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4573 print something for reserved opcode values, even if it won't
4576 * mips-dis.c (_print_insn_mips): When initializing, shift right
4577 and mask, to avoid sign extension problems on the Alpha.
4579 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4582 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4584 * sh-opc.h (mov.l gbr): Get direction right.
4585 * sh-dis.c (print_insn_shx): New function.
4586 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4587 print opcodes with right byte order.
4589 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4591 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4592 to avoid conflicts with getopt.
4594 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4596 * hppa-dis.c (print_insn_hppa): Read the instruction using
4597 bfd_getb32, so that it works on a little endian or 64 bit host.
4598 Remove unused local variable op.
4600 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4602 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4603 addu does not work correctly if -mips3.
4605 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4607 * a29k-dis.c (print_special): Add special register names defined
4608 on 29030, 29040 and 29050.
4609 (print_insn): Handle new operand type 'I'.
4611 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4613 * Makefile.in (INSTALL): Use top level install.sh script.
4615 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4617 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4618 that it works on a little endian host.
4620 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4622 * configure.in: Use ${config_shell} when running config.bfd.
4624 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4626 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4628 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4630 * a29k-dis.c (print_insn): Print the opcode.
4632 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4634 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4636 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4638 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4640 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4642 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4643 which store a value into memory.
4645 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4647 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4648 * arm-dis.c, arm-opc.h: New files.
4650 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4652 * Makefile.in (ns32k-dis.o): Add dependency.
4653 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4654 string, not as array of chars.
4656 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4658 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4660 * sparc-opc.c: Added sparclite extended FP operations, and
4661 versions of v9 impdep* instructions permitting specification of
4664 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4666 * i960-dis.c (reg_names): Now const.
4667 (struct sparse_tabent): New type, copied from array type in mem
4669 (ctrl): Local static array ctrl_tab now const.
4670 (cobr): Local static array cobr_tab now const.
4671 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4672 static variable mem_tab no longer explicitly initialized. Changed
4673 mem_init to const array of struct sparse_tabent.
4674 (reg): Local static variable reg_tab no longer explicitly
4675 initialized. Changed reg_init to const array of struct
4677 (ea): Local static array scale_tab now const.
4679 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4682 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4684 * configure.bat: the disassember needs to be enabled for
4685 "objdump -d" to work in djgpp.
4687 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4689 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4690 (invalid_float): Enabled general version, doesn't require running
4691 on ns32k host. Changed to take char* argument, and test for
4692 explicitly specified sizes, instead of using sizeof() on host CPU
4694 (INVALID_FLOAT): Cast first argument.
4695 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4696 list_P032, list_M032): Now const.
4697 (optlist, list_search): Made appropriate arguments now point to
4699 (print_insn_arg): Changed static array of one-character-string
4700 pointers into a static const array of characters; fixed sprintf
4701 statement accordingly.
4703 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4705 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4706 from distribution. A ns32k-dis.c from a previous distribution has
4707 been brought up to date and supports the new interface.
4709 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4711 * configure.in: add bfd_ns32k_arch target support.
4713 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4714 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4716 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4718 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4721 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4723 * h8300-dis.c, mips-dis.c: Don't use true and false.
4725 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4727 * configure.in: Change --with-targets to --enable-targets.
4729 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4731 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4732 opcodes to the first instruction with that opcode, to speed
4733 disassembly of large files. From ralphc@pyramid.com (Ralph
4736 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4740 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4742 * configure.bat: update to latest makefile.in
4744 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4746 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4747 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4748 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4749 slot insn is in a delay slot.
4750 * z8k-opc.h: (resflg): Fix patterns.
4751 * h8500-opc.h Fix CR insn patterns.
4753 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4755 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4756 "cmpl" before POWER versions, so that gas -many uses them.
4758 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4760 * disassemble.c: New file.
4761 * Makefile.in (OFILES): Add disassemble.o.
4762 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4763 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4764 binutils/configure.in.
4766 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4767 opcode being examined.
4769 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4771 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4772 (insert_ral, insert_ram, insert_ras): New functions.
4773 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4774 RAS for store with update.
4776 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4779 (edelsohn@npac.syr.edu).
4781 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4786 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4788 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4790 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4792 * ppc-opc.c (powerpc_operands): The signedp field has been
4793 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4794 instead. Add new operand SISIGNOPT.
4795 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4796 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4797 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4800 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4802 * i386-dis.c (struct private): Renamed to dis_private. `private'
4803 is a reserved word for dynix cc.
4805 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * configure.in: Change error message to refer to bfd/config.bfd
4808 rather than bfd/configure.in.
4810 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4812 * ppc-opc.c: Define POWER2 as short alias flag.
4813 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4816 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * i960-dis.c (print_insn_i960): Don't read a second word for
4819 opcodes 0, 1, 2 and 3.
4821 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4823 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4825 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4827 * m68881-ext.c: Removed; no longer used.
4828 * Makefile.in: Changed accordingly.
4830 * m68k-dis.c (ext_format_68881): Don't declare.
4831 (print_insn_m68k): If an instruction uses place 'i', it uses at
4832 least four fixed bytes.
4833 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4834 extended float, convert to double using floatformat_to_double, not
4835 ieee_extended_to_double, and fetch the data before converting it.
4837 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4840 davidj@ICSI.Berkeley.EDU (David Johnson).
4842 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4844 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4845 PowerPC uses bdnz[l][a].
4847 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4849 * dis-buf.c, i386-dis.c: Include sysdep.h.
4851 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4855 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4856 by Motorola PowerPC 601 with PPC_OPCODE_601.
4857 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4858 Disassemble Motorola PowerPC 601 instructions as well as normal
4859 PowerPC instructions.
4861 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4863 * i960-dis.c (reg, mem): Just use a static array instead of
4866 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4868 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4869 condition name index if this is for a negated condition.
4871 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4872 Floating point format for 'H' operand is backwards from normal
4873 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4874 operands (fmpyadd and fmpysub), handle bizarre register
4875 translation correctly for single precision format.
4877 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4878 or 'I' operands if the next format specifier is 'M' (fcmp
4879 condition completer).
4881 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4883 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4884 single number giving a bitmask for the MB and ME fields of an M
4885 form instruction. Change NB to accept 32, and turn it into 0;
4886 also turn 0 into 32 when disassembling. Seperated SH from NB.
4887 (insert_mbe, extract_mbe): New functions.
4888 (insert_nb, extract_nb): New functions.
4889 (SC_MASK): Mask out SA and LK bits.
4890 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4891 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4892 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4893 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4894 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4895 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4896 (powerpc_macros): Define table of macro definitions.
4897 (powerpc_num_macros): Define.
4899 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4900 if PPC_OPERAND_NEXT is set.
4902 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4904 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4905 char. Retrieve contents using bfd_getl32 instead of shifting.
4907 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4909 * ppc-opc.c: New file. Opcode table for PowerPC, including
4910 opcodes for POWER (RS/6000).
4911 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4912 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4913 (CFILES): Add ppc-dis.c.
4914 (ppc-dis.o, ppc-opc.o): New targets.
4915 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4917 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4919 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4920 No space before 'u', 'f', or 'N'.
4922 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4924 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4925 farther than we should.
4927 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4929 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4931 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4933 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4935 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4936 needs it, to prevent reading past the end of a section.
4938 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4940 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4941 Removed t,A case for la; always use t,A(b) case.
4943 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4945 From Ted Lemen <mellon@pepper.ncd.com>
4946 * mips-dis.c (print_insn_arg): Handle 'k'.
4947 * mips-opc.c: Make cache use k, not t.
4949 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4951 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4952 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4953 FLOAT_FORMAT_CODE to put out floating point register names.
4955 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4957 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4959 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4963 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4965 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4966 larger than 32. Moved dsxx32 variants first for disassembler.
4968 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4970 * z8kgen.c, z8k-opc.h: Add full lda information.
4972 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4974 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4975 movb instructions. Any necessary space will be emitted by
4976 the code to handle nullification completers.
4978 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4980 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4982 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4984 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4985 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4987 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4989 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4991 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4993 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4994 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4996 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4998 * m88k-dis.c (m88kdis): comment change. Remove space after
5000 (printop): handle new arg types DEC and XREG for m88110.
5002 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5004 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5005 type for absolute branch addresses. Delete special
5006 "ble" and "be" code in 'W' operand code.
5008 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5010 * mips-opc.c: Set hazard information correctly for branch
5011 likely instructions.
5013 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5015 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5016 info->fprintf_func for printing and info->print_address_func for
5019 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5021 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5023 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5025 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5026 Corrected second case of "b" for disassembler.
5028 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5031 to BFD swapping routines to correspond to BFD name changes.
5033 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.c: Change div machine instruction to be z,s,t rather
5036 than s,t. Change div macro to be d,v,t rather than d,s,t.
5037 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5038 rem and remu which generates only the corresponding div
5039 instruction. This is for compatibility with the MIPS assembler,
5040 which only generates the simple machine instruction when an
5041 explicit destination of $0 is used.
5042 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5044 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5047 WR_31 hazard for bal, bgezal, bltzal.
5049 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5051 * hppa-dis.c (print_insn_hppa): Use print function
5052 from within the disassemble_info, not fprintf_filtered.
5054 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5056 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5057 Law, law@cs.utah.edu.)
5059 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5061 * mips-opc.c ("absu"): Removed.
5064 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5066 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5067 Changed hazard information to distinguish between memory load
5068 delays and coprocessor load delays.
5070 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5072 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5074 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5076 * configure.in: Don't pass cpu to config.bfd.
5078 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5080 * m88k-dis.c (m88kdis): Make class unsigned.
5082 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5084 * alpha-dis.c (print_insn_alpha): One branch format case was
5085 missing the instruction name.
5087 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5089 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5090 Add the arch-specific auxiliary files.
5091 (OFILES): Remove the arch-specific auxiliary files
5092 and use BFD_MACHINES instead of DIS_LIBS.
5093 * configure.in: Set BFD_MACHINES based on --with-targets option.
5095 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5097 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5100 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5102 * sparc-opc.c: Change CONST to const to deal with gcc
5103 -Dconst=__const -traditional.
5105 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5107 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5108 coprocessor instructions out of #if 0, and made them use new
5111 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5113 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5115 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5117 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5118 instruction, for use by the disassembler.
5120 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5121 hand-coded sign extensions that depended on 32-bit host ints.
5122 FIXME, we still depend on big-endian host bitfield ordering.
5123 (sparc_print_insn): Set the insn_info_valid field, and the
5124 other fields that describe the instruction being printed.
5126 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5128 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5129 `jmp' instead of just one of them.
5131 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5133 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5134 (fput_fp_reg_r): Renamed from fput_reg_r.
5135 (fput_fp_reg): New function.
5136 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5138 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5140 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5142 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5144 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5146 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5147 don't output a space.
5149 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5151 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5153 * mips-opc.c: New file, containing opcode table from
5154 ../include/opcode/mips.h.
5155 * Makefile.in: Add it.
5157 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5159 * m88k-dis.c: New file, moved in from gdb and changed to use the
5160 new dis-asm.h disassembler interface.
5161 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5162 (m88k-dis.o): New target.
5164 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5166 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5167 argument string const char * to correspond to opcode/mips.h.
5169 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5171 * mips-dis.c: Updated to account for name changes in new version
5173 * Makefile.in: Added header file dependencies.
5175 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5177 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5179 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5181 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5182 extend, rather than shifts.
5184 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5186 * Makefile.in: Undo 15 June change.
5188 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5190 * m68k-dis.c (print_insn_arg): Change return value to byte count
5192 * m68k-dis.c: Re-write to detect invalid operands before
5193 printing anything, so we can handle this the same way we
5194 handle invalid opcodes.
5196 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5198 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5200 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5202 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5205 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5207 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5209 * configure.in: Do make sysdep.h link.
5210 * Makefile.in: Search ../include. Don't search ../bfd.
5212 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5214 Changes from Jeff Law, law@cs.utah.edu:
5215 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5216 Do not print a space before the completers specified by
5219 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5221 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5222 defined, since gdb has been fixed.
5224 Changes from Jeff Law, law@cs.utah.edu:
5225 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5226 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5227 be a *disassemble_info, not a *FILE.
5228 * hppa-dis.c: Support 'd', '!', and 'a'.
5229 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5230 * hppa-dis.c: Delete cases which are no longer needed.
5232 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5234 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5236 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5238 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5241 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5243 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5244 * configure.in: No longer need to configure to get sysdep.h.
5246 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5248 * Patches from Jeffrey Law <law@cs.utah.edu>.
5249 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5250 templates for 1.1 FP computational instructions.
5252 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5254 * h8500-dis.c (print_insn_h8500): Address argument is type
5256 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5259 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5260 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5262 * sparc-dis.c (compare_opcodes): Move static declaration to
5265 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5267 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5268 instruction, remove unimp hack from 'l' argument.
5270 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5272 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5275 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5277 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5278 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5281 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5283 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5284 arrays of string pointers to 2-d arrays of chars, to save
5287 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5289 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5290 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5292 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5294 * hppa-dis.c: New file from Utah, adapted to new disassembler
5296 * Makefile.in: Include it.
5298 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5300 * sh-dis.c, sh-opc.h: New files.
5302 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5304 * alpha-dis.c, alpha-opc.h: New files.
5306 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5308 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5311 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5313 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5315 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5317 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5320 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5322 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5323 and double percent signs a few places.
5325 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5327 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5328 Use info->print_address_func not print_address.
5330 * dis-buf.c (generic_print_address): New function.
5332 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5334 * Makefile.in: Add sparc-dis.c.
5335 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5337 Add `add' instruction to the set that get checked
5338 for a preceding `sethi' in order to print an absolute address.
5339 * (print_insn): Disassembly prefers real instructions.
5340 (is_delayed_branch): Speed up.
5341 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5342 Still missing some float ops, and needs testing.
5343 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5344 F_ALIAS. Use printf, not fprintf, when not passing a file
5346 (compare_opcodes): Check that identical instructions have
5347 identical opcodes, complain otherwise.
5350 * Include reg_names.
5352 Use dis-asm.h/read_memory_func interface.
5354 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5356 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5357 deliberately return non-zero to setjmp from longjmp. Otherwise
5358 this code fails to compile.
5360 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5362 * m68k-dis.c: Fix prototype for fetch_arg().
5364 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5366 * dis-buf.c: New file, for new read_memory_func interface.
5367 Makefile.in (OFILES): Include it.
5368 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5369 Use new read_memory_func interface.
5371 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5373 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5374 * h8500-opc.h: Fix couple of opcodes.
5376 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5378 * Makefile.in: add dvi & installcheck targets
5380 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5382 * Makefile.in: Update for h8500-dis.c.
5384 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5386 * h8500-dis.c, h8500-opc.h: New files
5388 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5390 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5391 ../include/dis-asm.h.
5392 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5393 and ../gdb/m68k-pinsn.c).
5394 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5395 and ../gdb/i386-pinsn.c).
5396 * m68881-ext.c: New file. Moved definition of
5397 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5398 * Makefile.in: Adjust for new files.
5399 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5400 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5401 can be dis-assembled.
5403 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5405 * mips-dis.c (print_insn_arg): Now returns void.
5407 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5409 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5410 files that use the macros.
5412 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5414 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5415 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5416 (CFILES): Added mips-dis.c.
5418 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5420 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5421 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5423 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5425 * Makefile.in: Improve *clean rules.
5426 * configure.in: Allow a default host.
5428 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5430 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5431 files include other sysdep files
5433 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5435 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5437 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5439 * configure.in: For host support, use ../bfd/configure.host
5440 so it stays in sync with the ../bfd/hosts database.
5442 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5444 * configure.in: use cpu-vendor-os triple instead of nested cases
5446 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5448 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5449 *always* the wrong one.
5451 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5453 * z8kgen.c: added copyright info
5455 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5457 * z8k-dis.c (unparse_instr): prettier tabs
5458 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5460 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5462 * configure.in: Add ncr* configuration.
5463 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5464 picayune ANSI compilers happy.
5466 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5468 * configure.in (i386): Make i386 and i486 synonymous for now.
5469 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5471 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5473 * Makefile.in (install): Fix typo.
5475 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5477 * Makefile.in (make): Remove obsolete crud.
5478 (sparc-opc.o): Avoid Sun Make VPATH bug.
5480 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5482 * Makefile.in: since there are no SUBDIRS, remove rule and
5483 references of subdir_do.
5485 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5487 * Makefile.in (install): Get the library name right here too.
5488 Don't install bfd.h, since it's unrelated to this library. No
5489 subdirs to recurse into, either.
5490 (CFILES): The source file has a .c suffix, not .o.
5492 * sparc-opc.c: New file, moved from BFD.
5493 * Makefile.in (OFILES): Build it.
5495 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5497 * z8k-dis.c: fixed forward refferences of some declarations.
5499 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5501 * Makefile.in: get the name of the library right
5503 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5505 * z8k-dis.c: knows how to disassemble z8k stuff
5506 * z8k-opc.h: new file full of z8000 opcodes
5510 version-control: never