1 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
3 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
5 * m10300-opc.c: First cut at UDF instructions.
7 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
9 * m32r-opc.c: Regenerate (remove semantic descriptions).
12 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
14 * arm-dis.c (print_insn_big_arm): Fix indentation.
15 (print_insn_little_arm): Likewise.
19 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
21 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
23 (print_insn_little_arm): Likewise.
26 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
28 Move all global state data into opcode table struct, and treat
29 opcode table as something that is "opened/closed".
30 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
31 (cgen_asm_init): Delete.
32 (cgen_set_parse_operand_fn): New function.
33 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
34 (cgen_dis_init): Delete.
35 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
36 (cgen_current_{opcode_table_mach,endian}): Delete.
38 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
39 * cgen-dis.in (all fns): Ditto.
40 * cgen-opc.in (all fns): Ditto.
42 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
45 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
47 * cgen-dis.in (print_normal): Split into two.
48 (print_address): New function.
49 (extract_insn_normal): Clarify insn_value arg.
50 (print_int_insn): Renamed from print_insn.
51 (print_insn): New arg.
52 (print_insn_@arch@): Open opcode table if not already done so.
53 Move reading of insn into print_insn.
56 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
58 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
62 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
64 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
65 accept an accumulator choice.
66 * m32r-opc.c,m32r-opc.h: Regenerate.
69 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
71 * m10300-opc.c: Add entries for "no_match_operands" field in
75 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
77 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
81 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
83 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
86 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
88 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
90 * m10300-opc.c: Add autoincrement memory loads/stores.
94 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
96 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
100 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
102 start-sanitize-cygnus
103 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
105 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
106 @arch_cgen_get_int_operand.
107 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
108 Update call to @arch@_cgen_insert_operand.
109 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
110 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
111 (extract_insn_normal): New arg `pc', callers updated.
112 Update call to @arch@_cgen_extract_operand.
113 (print_insn): Update call to CGEN_EXTRACT_FN.
115 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
118 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
120 * m10300-opc.c: Fix load to sp and store from sp for the am33.
121 Add more multimedia instructions.
123 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
125 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
130 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
132 * mips-opc.c (pref): Enabled for the r5900.
135 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
137 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
139 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
141 (OP_J): Remove unnecessary subtraction when 16-bit displacement
142 will be masked later.
145 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
147 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
150 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
152 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
153 from raw register #s to symbolic names to make debugging easier.
156 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
158 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
160 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
162 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
163 start-sanitize-cygnus
164 * Makefile.am (CGENDIR): Set via configure.
165 (CGEN): New variable.
166 (CGENFILES): object.scm renamed to cos.scm.
167 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
168 (stamp-m32r): Pass prefix to run-cgen.
169 * Makefile.in: Regenerate.
170 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
171 * cgen-dis.in: Ditto.
172 * cgen-opc.in: Ditto.
173 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
174 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
175 * configure: Regenerate.
179 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
181 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
183 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
185 * m10300-opc.c: Reorder more instructions so that we do not
186 accidentally match a mn10300 instruction when we really
187 wanted an am33 instruction.
190 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
192 * m10300-dis.c: Only recognize instructions from the currently
194 * m10300-opc.c: Add field indicating the particular variant of
195 the mn10300 each instruction is available on.
197 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
199 * configure.in: For bfd_vax_arch, build vax-dis.lo.
200 * Makefile.am: Rebuild dependencies.
201 (CFILES): Add vax-dis.c.
202 (ALL_MACHINES): Add vax-dis.lo.
203 * aclocal.m4: Rebuild with current libtool.
204 * configure, Makefile.in: Rebuild.
206 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
208 * vax-dis.c: New file, from work by Pauline Middelink
209 <middelin@polyware.iaf.nl>.
210 * disassemble.c (ARCH_vax): Define if ARCH_all.
211 (disassembler): Add case for ARCH_vax.
212 * makefile.vms: Support compilation on vms/vax.
215 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
217 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
218 the DVP_OPERAND_RELOC_11_S4 relocation.
222 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
224 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
226 (disassemble): Correctly handle FMT_D10 instructions.
228 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
229 am33 shift instructions.
231 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
233 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
234 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
236 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
237 (mn10300_opcodes): Reorder so as to try and select opcodes from
238 the core chip when multiple alternatives exist. Change several
239 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
240 "macbu" instructions. Fix typos in a couple DSP instructions too.
243 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
245 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
246 related to sign extension and the size of ints.
248 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
250 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
251 instructions. Support (sp) addressing mode by expanding it into
255 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
257 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
258 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
259 be used as immediate values.
263 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
265 * m10300-opc.c: Support 4 byte DSP instructions.
268 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
270 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
273 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
275 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
278 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
280 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
283 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
285 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
286 found on the mn10300.
289 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
291 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
294 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
296 * mips-dis.c (print_insn_little_mips): Previously, instruction
297 printing references the symbol table to determine whether the
298 instruction resides in a block regular instructions or mips16
299 instructions. However, when the disassembler gets used in other
300 environments where the symbol table is not present, we no longer
301 rely in the symbol table, rather, use the low bit of the
302 instructions address to guess. There should be no change for usage
303 of the disassembler in host based programse, gdb ,objdump.
304 (print_insn_big_mips): ditto.
305 (print_insn_mips): ditto
307 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
309 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
311 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
314 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
315 operands for the am33.
316 (mn10300_opcodes): Add new instructions from the am33.
318 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
320 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
322 * i386-dis.c (index16): Add '%' to register names. Use ','
325 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
327 * i386-dis.c: Don't print opcode suffix when we can figure out the
328 size (and gas can!) by register operands, or from the default
330 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
332 (dis386, dis386_twobyte, grps): Use new suffix macros.
333 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
334 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
335 order of cmps operands to agree with Intel docs. Correct operand
336 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
337 agree with Intel docs.
338 (print_insn_x86): Print orphan fwait before other prefixes.
339 Return correct byte count for orphan fwait with prefixes. Don't
340 print `bound' operands in reverse order.
341 (ckprefix): Stop accumulating prefixes if we get fwait.
342 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
344 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
346 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
347 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
349 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
351 Fix problems when bfd_vma is wider than long.
352 * i386-dis.c: Make op_address and start_pc unsigned.
353 (set_op): Make parameter unsigned.
354 (print_insn_x86): Cast to bfd_vma when passing a value to
356 * ns32k-dis.c (CORE_ADDR): Don't define.
357 (print_insn_ns32k): Change type of addr to bfd_vma. Use
358 bfd_scan_vma to read back address.
359 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
361 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
362 (NEXTULONG): New definition.
363 (print_insn_m68k): Avoid overflow when computing third argument of
365 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
366 Use disp instead of val to store offset values.
367 (print_indexed): Use base_disp instead of word to store base
368 displacement, to avoid overflow.
369 * m10300-dis.c (disassemble): Cast value to long when computing
370 pc-relative address, to get correct sign extension.
372 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
374 * m32r-opc.c: Regenerate.
376 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
378 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
379 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
381 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
383 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
385 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
387 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
389 (OP_DSreg): Rename from OP_DSSI.
390 (OP_ESreg): Rename from OP_ESDI.
391 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
393 (append_seg): Rename from append_prefix.
394 (ptr_reg): New function.
395 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
397 (PREFIX_ADDR): Rename from PREFIX_ADR.
398 (float_reg): Add non-broken opcodes for people who don't want
401 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
403 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
406 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
408 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
410 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
412 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
413 0; produce error message for shifts of size 32 (or 64 for 64-bit
414 shifts), because the hardware doesn't support them.
417 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
419 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
422 * vu0.h (sqc2): Fix opcode.
424 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
428 start-sanitize-cygnus
429 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
431 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
432 Change pinfo to use WR_HILO.
435 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
437 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
438 LONG_2, LONG_2b formats to use this new operand.
440 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
442 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
444 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
446 * sparc-dis.c (print_insn_sparc): big endian instruction / little
449 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
451 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
452 and SHORT_B3b formats to use Rb instead of Ra.
454 Add FLAG_MUL16 to MUL2XH opcode.
456 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
457 to existing 1.1.1 parallelisation prohibition procedure.
459 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
461 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
462 * cgen-dis.in (extract_normal): Likewise.
463 * m32r-asm.c,m32r-dis.c: Regenerate.
466 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
468 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
472 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
474 * mips-opc.c (multu1): Add two operand variant for the r5900.
477 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
479 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
480 with a shift count of 0.
483 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
485 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
487 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
489 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
490 (_print_insn_mips): Likewise.
491 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
495 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
497 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
498 (cgen_hw_lookup_by_num): New function.
501 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
504 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
506 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
508 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
510 * sparc-dis.c (print_insn_sparc): Always fetch instructions
511 as big-endian on SPARClite.
514 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
516 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
518 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
522 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
524 * d30v-opc.c (pre_defined_register): Remove alias for r0.
527 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
529 * mips-opc.c (break): Added 20-bit single-operand break
530 instruction for R5900 only.
533 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
535 * po/Make-in (install-info): New target.
537 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
539 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
540 * configure: Rebuild.
542 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
544 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
545 variety of ISA2 instructions to set bottom ten bits of trap code.
547 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
549 * Makefile.am (config.status): Add explicit target so that
550 config.status depends upon bfd/configure.in.
551 * Makefile.in: Rebuild.
553 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
555 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
556 instructions to set bottom ten bits of break code.
557 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
558 for above optional argument.
560 start-sanitize-cygnus
561 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
563 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
564 * m32r-opc.h: Regenerate.
567 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
569 * makefile.vms: Run dec c with /nodebug.
571 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
573 * Makefile.in: Rebuilt.
574 * Makefile.am: Regenerated dependencies with mkdep.
576 * opintl.h (_): Define as dgettext.
578 start-sanitize-cygnus
579 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
581 * configure.in: Add support for --enable-cgen-maint.
582 * Makefile.am (M32R_DEPS): New variable.
583 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
584 * aclocal.m4: Regenerate.
585 * Makefile.in: Regenerate.
586 * configure: Regenerate.
588 * Makefile.am (CGENFILES): Add minsn.scm.
591 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
593 * cgen-asm.c: Internationalised.
594 start-sanitize-cygnus
595 * cgen-asm.in: Internationalised.
596 * cgen-opc.in: Internationalised.
598 * m32r-asm.c: Internationalised.
599 * m32r-dis.c: Internationalised.
600 * m32r-opc.c: Internationalised.
602 * aclocal.m4: Regenerated.
603 * configure: Regenerated.
604 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
605 * Makefile.in: Rebuild.
606 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
607 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
609 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
611 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
613 * aclocal.m4, configure: Rebuild with current tools.
615 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
617 * opintl.h: New file - contains internationalisation macros used
618 by source files in this directory.
619 * po/: New subdirectory - contains internationalisation files.
620 * po/Make-in: New file - Makefile constructor.
621 * po/POTFILES.in: New file - list of files in opcodes directory
622 that should be scan for internationalisation macros.
623 * po/opcodes.pot: New file - list of internationisation strings
624 found in files mentioned in po/POTFILES.in.
625 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
626 entry. Add intl directory to include paths.
627 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
628 HAVE_STRCPY, HAVE_LC_MESSAGES
629 * configure.in: Add rule to build Makefile in po subdirectory.
630 * Makefile.in: Rebuilt.
631 * aclocal.m4: Rebuilt.
632 * config.in: Rebuilt.
633 * configure: Rebuilt.
634 * alpha-opc.c: Internationalised.
635 * arc-dis.c: Internationalised.
636 * arc-opc.c: Internationalised.
637 * arm-dis.c: Internationalised.
638 * cgen-asm.c: Internationalised.
639 * d30v-dis.c: Internationalised.
640 * dis-buf.c: Internationalised.
642 * dvp-dis.c: Internationalised.
643 * dvp-opc.c: Internationalised.
645 * h8300-dis.c: Internationalised.
646 * h8500-dis.c: Internationalised.
647 * i386-dis.c: Internationalised.
648 * m10200-dis.c: Internationalised.
649 * m10300-dis.c: Internationalised.
650 * m68k-dis.c: Internationalised.
651 * m88k-dis.c: Internationalised.
652 * mips-dis.c: Internationalised.
653 * ns32k-dis.c: Internationalised.
654 * opintl.h: Internationalised.
655 * ppc-opc.c: Internationalised.
656 * sparc-dis.c: Internationalised.
657 * v850-dis.c: Internationalised.
658 * v850-opc.c: Internationalised.
660 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
662 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
663 (asm_hash_table_entries): New variable.
664 (cgen_asm_init): Free asm_hash_table_entries.
665 (hash_insn_array,hash_insn_list): New functions.
666 (build_asm_hash_table): Use them. Hash macro insns as well.
667 (cgen_asm_lookup_insn): Update.
668 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
669 (dis_hash_table_entries): New variable.
670 (cgen_dis_init): Free dis_hash_table_entries.
671 (hash_insn_array,hash_insn_list): New functions.
672 (build_dis_hash_table): Use them. Hash macro insns as well.
673 (cgen_dis_lookup_insn): Update.
674 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
675 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
676 (cgen_macro_insn_count): New function.
677 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
678 All callers updated. Sanity check result of extract fn.
679 (@arch@_cgen_get_insn_operands): Change result type to void.
680 Delete args insn_value, length. New arg fields. All callers updated.
681 (@arch@_cgen_lookup_get_insn_operands): New function.
682 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
684 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
686 * i386-dis.c (OP_DSSI): Print segment override.
689 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
691 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
695 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
697 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
701 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
703 * vu0.h (vlqd, vlqi): Update per revised specs.
707 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
709 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
710 (vif_operands): Update.
711 (vif_get_unpackloc): Delete.
712 (state_vif_unpackloc{,_star_p}): Delete.
713 (dvp_opcode_init_parse): Update.
714 (vif_unpack_len_value): Avoid divide by zero.
718 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
720 * vu0.h: Specs changed for VCALLMSR bit pattern.
721 * mips-dis.c: (print_insn_arg) Matching change.
724 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
726 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
729 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
731 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
732 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
733 * configure.in: Define and substitute WIN32LDFLAGS and
735 * aclocal.m4: Rebuild with new libtool.
736 * configure, Makefile.in: Rebuild.
739 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
741 * vu0.h: Corrected bit pattern for VMAXI opcode.
744 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
746 * m32r-opc.c: Regenerate.
749 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
751 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
752 (dvp_expand_macro): Implement.
753 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
754 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
757 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
759 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
760 before trying to copy it.
761 * Makefile.in: Rebuild.
763 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
765 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
768 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
770 * m32r-opc.c: Fix bit patterns for SAT and SATB.
773 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
775 * ns32k-dis.c (bit_extract_simple): New function to extract bits
776 from an arbitrary valid buffer instead of fetching them on demand
778 (invalid_float): use bit_extract_simple() instead of bit_extract().
781 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
783 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
784 * m32r-opc.h: Add extra control registers.
787 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
789 From H.J. Lu <hjl@gnu.org>:
790 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
793 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
795 * Branched binutils 2.9.
797 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
799 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
800 disassembling last 4 bytes of a section.
802 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
804 Fix some gcc -Wall warnings:
805 * arc-dis.c (print_insn): Add casts to avoid warnings.
806 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
807 * d10v-dis.c (dis_long, dis_2_short): Likewise.
809 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
810 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
811 (parse_bc, parse_vfreg, parse_accdest): Likewise.
812 (parse_ffstreg, parse_vif_mode): Likewise.
814 * m10200-dis.c (disassemble): Likewise.
815 * m10300-dis.c (disassemble): Likewise.
816 * ns32k-dis.c (print_insn_ns32k): Likewise.
817 * ppc-opc.c (insert_ral, insert_ram): Likewise.
818 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
819 * cgen-opc.c (cgen_keyword_search_next): Likewise.
820 * d10v-dis.c (dis_long, dis_2_short): Likewise.
821 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
823 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
824 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
825 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
827 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
829 * tic80-dis.c (print_one_instruction): Likewise.
831 * w65-dis.c (print_operand): Likewise.
832 * z8k-dis.c (fetch_data): Likewise.
833 * a29k-dis.c: Add return type for find_byte_func_type.
834 * arc-opc.c: Include <stdio.h>. Remove declarations of
835 insert_multshift and extract_multshift.
836 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
838 (extract_value): Fully parenthesize expression.
840 * dvp-opc.c: Include <ctype.h>.
841 (print_sdest): Add default case to switch.
843 * h8500-dis.c (print_insn_h8500): Initialize local variables.
844 * h8500-opc.h (h8500_table): Fully bracket initializer.
845 * w65-opc.h (optable): Likewise.
846 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
847 * i386-dis.c (OP_E): Initialize local variables.
848 * m10200-dis.c (print_insn_mn10200): Likewise.
849 * mips-dis.c (print_insn_mips16): Likewise.
850 * sh-dis.c (print_insn_shx): Likewise.
851 * v850-dis.c (print_insn_v850): Likewise.
852 * ns32k-dis.c (print_insn_arg): Declare.
853 (get_displacement, invalid_float): Declare.
854 (list_search, sign_extend, flip_bytes): Declare return type.
855 (get_displacement): Likewise.
856 (print_insn_arg): Likewise. Make d int. Fix sprintf format
858 (print_insn_ns32k): Make i unsigned.
859 (invalid_float): Make static. Declare type of val.
860 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
861 on each for iteration.
862 * tic30-dis.c (get_indirect_operand): Likewise.
863 * z8k-dis.c (print_insn_z8001): Declare return type.
864 (print_insn_z8002): Likewise.
865 (unparse_instr): Fix sprintf format strings.
867 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
869 * mips-opc.c: Add "sync.l" and "sync.p".
872 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
874 * dvp-opc.c (extract_vif_datalen): Rewrite.
875 (vif_insn_len): Perform 0->max+1 conversion for direct length.
877 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
879 * dvp-dis.c (print_insn): Print unpack address in hex.
880 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
881 Don't skip over '*', just record it.
882 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
883 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
884 Don't skip over '*', just record it.
885 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
886 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
887 (vif_opcodes): Likewise.
888 (state_vif_{mpg,unpack}loc_star_p): New static locals.
889 (vif_macros,vif_macro_count): New globals.
890 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
891 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
892 (vif_get_wl_cl): New function.
893 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
896 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
898 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
899 default m68k variant to recognize.
901 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
902 (ctrl, cobr, mem, ea): Likewise.
903 (print_addr): Likewise. Remove cast.
904 (ea): Cast argument of print_addr to bfd_vma.
906 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
908 (cgen_parse_unsigned_integer): Likewise.
909 (cgen_parse_address): Likewise.
911 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
913 * i960-dis.c (ctrl): Add full braces to structure initialization.
914 (cobr, mem, reg): Likewise.
915 (ea): Correct parenthesization in expression.
917 * cgen-asm.c: Include <ctype.h>.
918 (build_asm_hash_table): Remove unused local variable i.
919 (cgen_parse_keyword): Add casts to avoid warnings.
921 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
922 symbol. Fix indentation.
923 (print_insn_little_arm): Likewise.
926 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
928 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
933 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
935 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
940 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
942 * dvp-opc.c (vif_operand_datalen_special): New global.
946 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
948 * vu0.h (vcallms): Use 'O' for call target operand.
949 * mips-dis.c (print_insn_arg): Handle 'O'.
952 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
954 * configure.in: Use AM_DISABLE_SHARED.
955 * aclocal.m4, configure: Rebuild with libtool 1.2.
958 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
960 * mips-dis.c: Change '%' to '#' in r5900 support.
964 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
966 These patches are courtesy of Jonathan Walton and Tony Thompson
967 (athompso@cambridge.arm.com).
969 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
972 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
973 both the offset and the label closest to the destination.
976 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
978 * vu0.h: New file with cop2/vu0 instructions.
979 * mips-opc.c: Include vu0.h.
980 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
982 (print_insn_mips): Do not emit a tab after an instruction if the
983 first arg is an instruction completer (&). If the next arg is an
984 escape character (%), then print the next arg verbatim.
985 * Makefile.am (mips-opc.lo): Depend on vu0.h
989 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
991 * dvp-opc.c (vif_opcodes): Add stcycl.
993 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
995 * dvp-dis.c (print_dma): Change length from 16 to 8.
998 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1000 * m32r-opc.h: Regenerate.
1003 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1005 * dvp-opc.c (print_dest1): Print dest spec again.
1006 (print_vfreg,print_accdest): Likewise.
1007 (vif_unpack_len): Round result up to word boundary.
1010 start-sanitize-vr4320
1011 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1013 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1015 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1017 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1022 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1024 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1025 (print_insn): Do mask comparison on proper opcode word.
1026 Print unsigned values in hex.
1027 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1028 (parse_bc): Catch missing dest.
1029 (parse_vfreg): Replace atoi call with strtol.
1030 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1031 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1032 (extract_gif_eop): New function.
1033 (gif_operands): Update eop entry.
1034 (VGIFOP,VGIFNREGS): Fix calcs.
1035 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1036 (gif_regs): Add entry for unused 11 case.
1037 (print_gif_regs): Print empty list instead of nothing.
1038 (extract_gif_nloop): Fix value calc.
1039 (print_gif_nloop): Always print value, even if 0.
1040 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1041 (vif_operands): Use them for wl,cl fields.
1042 (state_vif_wl,state_vif_cl): New static locals.
1043 (parse_vif_mode): Handle numeric args.
1044 (vif_unpack_len_value,vif_unpack_len): New functions.
1045 (vif_insn_len): Call vif_unpack_len.
1048 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1050 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1052 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1054 * cgen-asm.in: Move insertion of generated routines to top of file.
1055 (insert_normal): Add prototype. Delete `shift' arg.
1056 * cgen-dis.in: Move insertion of generated routines to top of file.
1057 (extract_normal): Add prototype. Delete `shift' arg.
1058 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1059 (print_keyword): Add prototype. Fix type of `attrs' arg.
1061 start-sanitize-vr4320
1062 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1064 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1065 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1068 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1070 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1071 assume that info->symbols is non-empty.
1073 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1075 * alpha-opc.c (cvtqs) There is no such thing.
1076 (cvttq): Missing most of the /*d variants.
1078 start-sanitize-r5900
1079 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1081 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1083 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1084 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1087 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1089 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1090 delayed branches or jumps.
1093 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1095 * dvp-opc.c (vif_operands): Add unpack[u] support.
1096 (vif_opcodes): Ditto.
1097 (*_vif_imrubits): Renamed from *_vif_imrbits.
1099 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1101 * dvp-dis.c (print_insn): Handle word number.
1102 Handle mips address vs vu address.
1103 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1104 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1105 ({insert,extract}_dma_addr): Fix word ofset.
1106 ({insert,print}_gif_regs): Fix encode/decode.
1109 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1111 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1113 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1114 * tic30-dis.c (print_branch): Likewise.
1116 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1117 * dvp-dis.c (dvp_info_mach_type): New function.
1118 (print_insn_dvp): Call it.
1119 (print_vif): Return length of 4 if mpg or direct insn so following
1120 insns get properly disabled.
1121 (print_gif): Fix word order.
1122 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1123 (gif_operands): Fix word order.
1124 (gif_opcodes): Likewise.
1125 ({insert,extract,print}_gif_regs): Likewise.
1126 (gif_regs): Add new register number/name changes.
1127 (dma_opcodes): Add dmarefe insn.
1130 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1132 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1133 saved_symbol code as it is no longer needed.
1135 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1137 * cgen-asm.c: Include symcat.h.
1138 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1140 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1143 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1145 * dvp-opc.c (extra_dma_flags): Fix typos.
1146 (dma_operands): Fix word numbers.
1147 (dma_opcodes): Likewise.
1148 ({insert,extract}_dma_flags): Likewise.
1151 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1153 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1156 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1158 * dvp-dis.c (print_gif): Complete.
1159 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1160 (state_gif_{nregs,regs,nloop}): New static locals.
1161 (*_gif_*): Complete.
1162 (dvp_opcode_init_{parse,print}): Init gif state locals.
1163 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1164 (vif_insn_len): Handle `unpack'.
1165 ({insert,extract}_dma_flags): Complete.
1168 start-sanitize-r5900
1169 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1171 * mips-opc.c (mula.s): Renamed from multa.s.
1174 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1176 * m32r-opc.[ch]: Regenerate.
1179 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1181 * dvp-opc.c (dma_operands): Rewrite.
1182 (dma_operand_{count,addr}): New globals.
1183 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1184 (insert_dma_addr): Insert value into insn.
1185 (extract_dma_addr): Extract value from insn.
1187 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1189 * dvp-dis.c (print_vu): Handle loi insns.
1190 (print_insn): Likewise.
1191 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1192 (vu_operands): Make LDEST1 a FAKE operand.
1193 (parse_dest1): Allow elided argument.
1194 (print_dest1): Don't print the argument.
1196 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1198 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1199 (print_vfreg): Don't print dest spec.
1200 (parse_accdest): Dest spec is optional.
1201 (print_accdest): Don't print dest spec.
1204 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1206 * Makefile.am (CGENFILES): Update.
1207 * Makefile.in: Regenerate.
1208 * cgen-asm.in (insert_normal): Result is error message now.
1209 Validate value to be inserted.
1210 (insert_insn_normal): Result is error message now.
1211 (@arch@_cgen_assemble_insn): Update.
1212 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1213 arguments. Don't perform validation here.
1214 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1216 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1218 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1219 operand instance list.
1220 * m32r-opc.c: Regenerate.
1222 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1224 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1225 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1227 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1229 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1231 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1233 * configure.in: Get the version number from BFD.
1234 * configure: Rebuild.
1236 From H.J. Lu <hjl@gnu.org>:
1237 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1238 * Makefile.in: Rebuild.
1240 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1242 * m32r-opc.c: Regenerate.
1243 * m32r-opc.h: Regenerate.
1245 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1247 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1248 Ignore ALIAS insns if asked to.
1249 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1250 * m32r-opc.c: Regenerate.
1253 * dvp.opc.c: Nicely format opcode tables.
1254 (vu_operands): New element UFLAGS.
1255 (parse_uflags,print_uflags): New functions.
1256 (vu_upper_opcodes): Add UFLAGS to all insns.
1259 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1261 Fix rac to accept only a0:
1262 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1263 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1264 Introduce OPERAND_GPR.
1265 * d10v-dis.c (print_operand): Likewise.
1267 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1269 * cgen-opc.in: New file.
1270 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1271 * Makefile.am (CGENFILES): Add cgen-opc.in.
1272 * Makefile.in: Regenerate.
1274 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1275 (cgen_hw_lookup): Make result const.
1277 * cgen-dis.in (*): Use PTR instead of void *.
1278 (print_insn): Delete unused vars `i', `syntax'.
1280 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1283 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1285 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1286 (vif_opcodes): Update renamed insns.
1287 * dvp-dis.c (*): Likewise.
1290 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1292 * configure, aclocal.m4: Rebuild with new libtool.
1294 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1296 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1297 instructions use a PC relative branch, not absolute.
1299 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1301 * configure.in: Set libtool_enable_shared rather than
1302 libtool_shared. Remove diversion hack.
1303 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1305 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1307 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1308 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1310 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1312 * tic30-dis.c: New file.
1313 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1314 * configure.in: Handle bfd_tic30_arch.
1315 * Makefile.am: Rebuild dependencies.
1316 (CFILES): Add tic30-dis.c
1317 (ALL_MACHINES): Add tic30-dis.lo.
1318 * configure, Makefile.in: Rebuild.
1320 start-sanitize-m32rx
1321 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1323 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1324 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1325 macwhi-a and macwlo-a instructions.
1329 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1331 * dvp-opc.c, fixed encoding of a bunch of instructions to
1332 be consistent with the asmvu assembler (and inconsistent
1333 with the specification).
1335 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1337 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1338 in the opcode table. The pkemscalf instruction must come first.
1340 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1342 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1345 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1347 * m32r-opc.h (HAVE_CPU_M32R): Define.
1350 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1352 * dvp-dis.c, dvp-opc.c: New files.
1353 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1354 * configure: Regenerate.
1355 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1356 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1357 (mips-dis.lo): Compile with @archdefs@.
1358 * Makefile.in: Regenerate.
1359 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1360 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1363 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1365 * v850-opc.c (insertion routines): If both alignment and size is
1366 wrong then report this.
1368 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1370 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1371 Only recognize instructions for the current target_processor.
1373 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1375 * d10v-dis.c (PC_MASK): Correct value.
1376 (print_operand): If there's a reloc, don't calculate the
1377 address because they could be in different sections.
1379 start-sanitize-cygnus
1380 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1382 * cgen.sh: Rewrite to be like simulator's version.
1383 * Makefile.am (cgen): Update call to cgen.sh.
1384 * Makefile.in: Regenerate
1387 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1389 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1390 instruction after the 4650's "mul" instruction; nobody's using the
1391 4010 these days. If object files someday indicate which processor
1392 variant they're intended for, we can do a better job at this.
1394 start-sanitize-r5900
1395 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1397 * mips-opc.c (c.lt.s): Add r5900 variant.
1401 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1403 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1404 table provided entry size. Use CGEN_INSN_MNEMONIC.
1405 (cgen_parse_keyword): Rewrite.
1406 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1407 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1408 * cgen-opc.c: Clean up pass over `struct foo' usage.
1409 (cgen_keyword_lookup_value): Handle "" entry.
1410 (cgen_keyword_add): Likewise.
1411 start-sanitize-cygnus
1412 * Makefile.am: Add cgen support.
1413 * Makefile.in: Regenerate.
1414 * configure.in: Add cgen support.
1415 * configure: Regenerate.
1416 * aclocal.m4: Regenerate.
1417 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1420 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1422 * mips-opc.c: Add FP_D to s.d instruction flags.
1424 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1426 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1428 start-sanitize-tic80
1429 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1431 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1432 PC relative offset forms before the 15 bit forms. An assembler command
1433 line option now chooses the default.
1436 start-sanitize-r5900
1437 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1439 * mips-opc.c: Add many missing r5900 instructions.
1442 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1444 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1445 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1447 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1449 * configure: Only build libopcodes shared if --enable-shared's value
1450 was `yes', or was set to `*opcodes*'.
1451 * aclocal.m4: Likewise.
1452 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1453 original source of this bit of code. It's not clear what the best fix
1456 start-sanitize-r5900
1457 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1459 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1461 start-sanitize-tic80
1462 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1464 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1465 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1466 offset forms before the 15 bit forms, to default to the long forms.
1469 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1471 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1473 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1475 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1476 symbol if none is present.
1477 (print_insn_big_arm): Prevent examination of stored symbol if
1480 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1482 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1484 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1486 * disassemble.c: Remove disasm_symaddr() function.
1488 * arm-dis.c: Use info->symbol instead of info->flags to determine
1489 if disassmbly should be in Thumb or Arm mode.
1491 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1493 * arm-dis.c: Add support for disassembling Thumb opcodes.
1494 (print_insn_thumb): New function.
1496 * disassemble.c (disasm_symaddr): New function.
1498 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1499 (thumb_opcodes): Table of Thumb opcodes.
1501 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1503 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1505 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1506 and 'v' as operand types.
1508 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1510 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1511 <olivier.carmona@di.epfl.ch>.
1512 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1513 which has a two word opcode with a one word argument.
1515 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1517 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1518 unsigned, not signed.
1519 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1521 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1523 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1524 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1525 (ftrv): Slay the cut-and-paste monster.
1527 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1529 * d10v-dis.c (print_operand):
1530 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1532 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1534 * d10v-opc.c (OPERAND_FLAG): Split into:
1535 (OPERAND_FFLAG, OPERAND_CFLAG) .
1539 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1541 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1542 field for all INSN_MACRO's.
1543 * mips16-opc.c: same
1545 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1547 * mips-opc.c (sync,cache): These are 3900 insns.
1549 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1551 sh-opc.h (sh_table): Remove ftst/nan.
1553 start-sanitize-cygnus
1554 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1556 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1557 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1559 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1563 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1565 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1566 Add tx49 insns and configury.
1569 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1571 * mips-opc.c (ffc, ffs): Fix mask.
1573 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1575 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1578 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1580 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1581 start-sanitize-cygnus
1582 Added VR5400 instructions.
1583 (N5): New cpu-id macro.
1585 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1587 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1589 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1590 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1592 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1594 * v850-dis.c (disassemble): Replace // with /* ... */
1596 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1598 * sparc-opc.c: Add wr & rd for v9a asr's.
1599 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1600 (v9a_asr_reg_names): New variable.
1601 Patch from David Miller <davem@vger.rutgers.edu>.
1603 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1605 * sparc-opc.c (v9notv9a): New insn type.
1606 (IMPDEP): Move to the end to not conflict with edge8 et al.
1607 Patch from David Miller <davem@vger.rutgers.edu>.
1609 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1611 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1613 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1615 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1617 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1619 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1620 of disassemble_info structure to determine if an overlay address
1621 has a matching symbol in low memory.
1623 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1624 new symbol_at_address_func field in disassemble_info structure.
1626 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1628 * v850-opc.c (extract_d22): Use signed arithmatic.
1630 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1632 * mips-opc.c: Three op mult is not an ISA insn.
1634 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1636 * mips-opc.c: Fix formatting.
1638 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1640 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1641 than assuming that char is signed. Explicitly sign extend 16 bit
1642 values, rather than assuming that short is 16 bits.
1643 (OP_sI, OP_J, OP_DIR): Likewise.
1645 start-sanitize-v850e
1646 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1648 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1652 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1654 * v850-opc.c: Fix typo in comment.
1656 * v850-dis.c (disassemble): Add test of processor type when
1657 determining opcodes.
1659 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1661 * configure.in: Use a diversion to set enable_shared before the
1662 arguments are parsed.
1663 * configure: Rebuild.
1665 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1667 * m68k-opc.c (TBL1): Use ! rather than `.
1668 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1670 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1672 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1674 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1676 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1679 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1680 * aclocal.m4: Rebuild with new libtool.
1681 * configure: Rebuild.
1683 start-sanitize-v850e
1684 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1686 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1689 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1691 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1693 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1695 * v850-opc.c (v850_opcodes): Further rearrangements.
1697 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1699 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1701 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1703 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1706 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1708 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1710 * mips16-opc.c: Added mips16 sdbbp.
1713 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1715 * v850-opc.c: Initialise processors field of v850_opcode structure.
1717 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1719 Merge changes from Martin Hunt:
1721 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1723 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1724 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1725 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1727 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1729 * d30v-dis.c (print_insn): First operand of d*i (delayed
1730 branch) instructions is relative.
1732 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1733 (d30v_operand_table): Add IMM6S3 type.
1734 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1736 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1737 and cmp instructions.
1739 * d30v-opc.c: Correct entries for repeat*, and sat*.
1740 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1741 types. Correct several formats.
1743 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1745 * d30v-opc.c (pre_defined_registers): Change control registers.
1747 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1748 SHORT_C2. Manual was incorrect.
1750 * d30v-dis.c (lookup_opcode): Return value now indicates
1751 if an opcode has a short and a long form. Used for deciding
1752 to append a ".s" or ".l".
1753 (print_insn): Append a ".s" to an instruction if it is
1754 the short form and ".l" if it is a long form. Do not append
1755 anything if the instruction has only one possible size.
1757 * d30v-opc.c: Change mulx2h to require an even register.
1758 New form: SHORT_A2; a SHORT_A form that needs an even
1759 register as the first operand.
1761 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1762 instruction was not being disassembled if there were an odd
1763 number of instructions.
1765 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1767 start-sanitize-v850e
1768 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1770 * v850-dis.c (disassemble): Improved display of register lists.
1773 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1775 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1776 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1777 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1778 fandnot1s, fandnot2s.
1780 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1782 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1784 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1786 * cgen-asm.c (cgen_parse_address): New argument resultp.
1787 All callers updated.
1788 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1790 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1792 * mn10200-dis.c (disassemble): PC relative instructions are
1793 relative to the next instruction, not the current instruction.
1795 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1797 * v850-dis.c (disassemble): Only signed extend values that are not
1798 returned by extract functions.
1799 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1801 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1803 * v850-opc.c: Update comments. Remove use of
1804 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1806 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1810 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1812 * configure: Rebuilt with latest devo autoconf for NT support.
1814 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1816 * v850-dis.c (disassemble): Use curly brace syntax for register
1819 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1820 where r0 is being used as a destination register.
1822 start-sanitize-v850e
1823 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1825 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1828 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1830 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1831 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1832 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1833 Add insns to access SGR and DBR.
1834 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1836 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1838 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1840 start-sanitize-v850e
1841 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1843 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1844 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1847 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1849 * configure (cgen_files): Add support for v850e target.
1850 * configure.in (cgen_files): Add support for v850e target.
1852 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1854 * configure (cgen_files): Add support for v850ea target.
1855 * configure.in (cgen_files): Add support for v850ea target.
1858 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * configure.in (bfd_arc_arch): Add.
1861 * configure: Rebuild.
1862 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1863 * Makefile.in: Rebuild.
1864 * arc-dis.c, arc-opc.c: New files.
1865 * disassemble.c (ARCH_all): Define ARCH_arc.
1866 (disassembler): Add ARC support.
1868 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1870 start-sanitize-v850e
1871 * v850-dis.c (disassemble): Add support for v850EA instructions.
1873 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1874 (v850_opcodes): Add v850EA instructions.
1876 * v850-dis.c (disassemble): Add support for v850E instructions.
1878 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1879 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1880 insert_spe, extract_spe): New Functions.
1881 (v850_opcodes): Add v850E instructions.
1884 * v850-opc.c: Reorganised and re-layed out to improve readability
1887 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1889 * configure: Rebuild with autoconf 2.12.1.
1891 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1893 * aclocal.m4, configure: Rebuild with new automake patches.
1895 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1897 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1898 * acinclude.m4: Just include acinclude.m4 from BFD.
1899 * aclocal.m4, configure: Rebuild.
1901 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * Makefile.am: New file, based on old Makefile.in.
1904 * acconfig.h: New file.
1905 * acinclude.m4: New file.
1906 * stamp-h.in: New file.
1907 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1908 Removed shared library handling; now handled by libtool. Replace
1909 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1910 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1911 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1912 handling in AC_OUTPUT.
1913 * dep-in.sed: Change .o to .lo.
1914 * Makefile.in: Now built with automake.
1915 * aclocal.m4: Now built with aclocal.
1916 * config.in, configure: Rebuild.
1918 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1920 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1922 start-sanitize-r5900
1923 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1925 * mips-opc.c: Fix coding of mtsa.
1928 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1930 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1932 * sparc-dis.c (sorted_opcodes): New static local.
1933 (struct opcode_hash): `opcode' is pointer to const element.
1934 (build_hash): First arg is now table of sorted pointers.
1935 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1936 (compare_opcodes): Update.
1938 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1940 * cgen-opc.c: #include <ctype.h>.
1941 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1942 Handle case insensitive hashing.
1943 (hash_keyword_value): Change type of `value' to unsigned int.
1945 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1947 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1948 precision FP, mark it as such. Likewise for double precision
1949 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1951 start-sanitize-r5900
1952 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1955 start-sanitize-r5900
1956 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1958 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1959 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1962 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1964 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1966 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1967 nesting depth when all the macros are expanded.
1969 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1971 * sparc-opc.c: The fcmp v9a instructions take an integer register
1972 as a destination, not a floating point register. From Christian
1973 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1975 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1977 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1978 syntax. From Roman Hodek
1979 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1981 * i386-dis.c (twobyte_has_modrm): Fix pand.
1983 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1985 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1987 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1989 * arm-dis.c: Add prototypes for arm_decode_shift and
1992 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1994 * mips-opc.c: Add r3900 insns.
1996 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1998 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1999 print delay slot instructions on the same line. When using a PC
2000 relative load, add a comment with the value being loaded if it can
2003 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2005 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2006 to pushS/popS for segment regs and byte constant so that
2007 pushw/popw printed when in 16 bit data mode.
2009 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2010 print cbtw, cwtd in 16 bit data mode.
2011 * i386-dis.c (putop): extra case W to support above.
2013 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2014 address size prefix in 16 bit address mode.
2016 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2018 * sh-dis.c: Reindent. Rename local variable fprintf to
2021 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2023 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2025 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2027 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2029 * mips16-opc.c (mip16_opcodes): same.
2031 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2033 * m68k-opc.c (moveb): Change $d to %d.
2035 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2037 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2038 (twobyte_has_modrm): Likewise.
2040 (OP_MMX, OP_EM, OP_MS): New static functions.
2042 * i386-dis.c: Revert patch of April 4. The output now matches
2045 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2047 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2050 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2052 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2054 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2056 * Makefile.in (install): Depend upon installdirs.
2057 (installdirs): New target.
2059 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2061 From Thomas Graichen <graichen@rzpd.de>:
2062 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2063 * configure: Rebuild.
2065 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2067 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2068 Delete string{,s}.h support.
2070 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2072 * cgen-asm.c (cgen_parse_operand_fn): New global.
2073 (cgen_parse_{{,un}signed_integer,address}): Update call to
2074 cgen_parse_operand_fn.
2075 (cgen_init_parse_operand): New function.
2076 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2077 from cgen_asm_init_parse.
2078 (m32r_cgen_assemble_insn): New operand `errmsg'.
2079 Delete call to as_bad, return error message to caller.
2080 (m32r_cgen_asm_hash_keywords): #if 0 out.
2082 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2084 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2086 [case 'J']: Fix typo in register name.
2088 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2090 * configure.in: Substitute SHLIB_LIBS.
2091 * configure: Rebuild.
2092 * Makefile.in (SHLIB_LIBS): New variable.
2093 ($(SHLIB)): Use $(SHLIB_LIBS).
2095 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2097 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2099 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2101 * disassemble.c (disassembler): Handle m32r.
2103 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2105 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2106 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2107 * Makefile.in (CFILES): Add them.
2108 (ALL_MACHINES): Add them.
2109 (dependencies): Regenerate.
2110 * configure.in (cgen_files): New variable.
2111 (bfd_m32r_arch): Add entry.
2112 * configure: Regenerate.
2114 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2116 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2117 * configure: Rebuild.
2119 * Makefile.in: Rebuild dependencies.
2121 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2123 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2126 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2128 * Branched binutils 2.8.
2130 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2132 * m10200-dis.c: Rename from mn10200-dis.c.
2133 * m10200-opc.c: Rename from mn10200-opc.c.
2134 * m10300-dis.c: Rename from mn10300-dis.c
2135 * m10300-opc.c: Rename from mn10300-opc.c.
2136 * Makefile.in: Update accordingly.
2138 * mips16-opc.c: Add mul and dmul macros.
2140 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2142 * makefile.vms: Update CFLAGS, add clean target.
2144 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2146 * mips-opc.c: Add "wait". From Ralf Baechle
2147 <ralf@gnu.ai.mit.edu>.
2149 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2150 * configure, config.in: Rebuild.
2151 * sysdep.h: Include <stdlib.h> if it exists.
2152 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2154 * Makefile.in: Rebuild dependencies.
2156 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2158 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2159 Andrew Bray <andy@madhouse.demon.co.uk>.
2161 * mips-opc.c: Add cast when setting mips_opcodes.
2163 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2165 * v850-dis.c (disassemble): Fix sign extension problem.
2166 * v850-opc.c (extract_d*): Fix sign extension problems to make
2167 disassembly calculate branch offsets correctly.
2169 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2171 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2173 * mips-opc.c: Add dctr and dctw.
2175 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2177 * d30v-dis.c (print_insn): Change the way signed constants
2180 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2182 * Makefile.in (BFD_H): New variable.
2183 (HFILES): New variable.
2184 (CFILES): Add all C files.
2185 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2186 Delete old dependencies, and build new ones.
2187 * dep-in.sed: New file.
2189 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2191 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2193 start-sanitize-coldfire
2194 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2196 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2199 end-sanitize-coldfire
2200 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2202 * mn10200-opc.c: Change "trap" to "syscall".
2203 * mn10300-opc.c: Add new "syscall" instruction.
2205 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2207 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2208 mulul insns on the coldfire.
2210 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2212 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2213 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2214 (print_insn_little_arm): Likewise.
2216 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2218 Based on patches from H.J. Lu <hjl@lucon.org>:
2219 * i386-dis.c (fetch_data): Add prototype.
2220 * m68k-dis.c (fetch_data): Add prototype.
2221 (dummy_print_address): Add prototype. Make static.
2222 * ppc-opc.c (valid_bo): Add prototype.
2223 * sparc-dis.c (build_hash_table): Add prototype.
2224 (is_delayed_branch, compute_arch_mask): Add prototypes.
2225 (print_insn_sparc): Make several local variables const.
2226 (compare_opcodes): Change arguments to const PTR. Add prototype.
2227 * sparc-opc.c (arg): Change name field to be const.
2228 (lookup_name, lookup_value): Add prototypes. Change table and
2229 name parameters to be const.
2230 (sparc_encode_asi): Change name parameter to be const.
2231 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2232 (sparc_encode_sparclet_cpreg): Likewise.
2233 (sparc_decode_asi): Change return type to be const.
2234 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2235 (sparc_decode_sparclet_cpreg): Likewise.
2237 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2239 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2240 Solaris doesn't like the combined options, and the -f is
2242 (stamp-tshlink, install): Likewise.
2244 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2246 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2249 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2251 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2253 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2255 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2258 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2260 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2262 start-sanitize-tic80
2263 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2265 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2267 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2269 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2272 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2274 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2275 floatformat_to_double to make portable.
2276 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2279 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2281 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2282 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2284 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2286 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2287 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2289 start-sanitize-tic80
2290 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2292 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2293 (OFF_SL_BR_SCALED): ... to this, and added the flag
2294 TIC80_OPERAND_BASEREL to the flags word.
2295 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2299 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2301 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2302 Change mips_opcodes from const array to a pointer,
2303 and change bfd_mips_num_opcodes from const int to int,
2304 so that we can increase the size of the mips opcodes table
2307 start-sanitize-tic80
2308 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2310 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2311 store BITNUM values in the table in one's complement form
2312 to match behavior when assembler is given a raw numeric
2313 value for a BITNUM operand.
2314 * tic80-dis.c (print_operand_bitnum): Ditto.
2317 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2319 * d30v-opc.c: Removed references to FLAG_X.
2321 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2325 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2327 * Makefile.in: Added d30v object files.
2328 * configure: (bfd_d30v_arch) Rebuilt.
2329 * configure.in: (bfd_d30v_arch) Added new case.
2330 * d30v-dis.c: New file.
2331 * d30v-opc.c: New file.
2332 * disassemble.c (disassembler) Add entry for d30v.
2334 start-sanitize-tic80
2335 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2337 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2338 representations for the floating point BITNUM values.
2340 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2342 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2343 in the table in one's complement form, as they appear in the
2345 (tic80_symbol_to_value): Use macros to access predefined
2347 (tic80_value_to_symbol): Ditto.
2348 (tic80_next_predefined_symbol): New function.
2349 * tic80-dis.c (print_operand_bitnum): Remove code that did
2350 one's complement for BITNUM values.
2353 start-sanitize-r5900
2354 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2356 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2359 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2361 * makefile.vms: Remove 8 bit characters. Update to latest
2364 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2366 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2368 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2370 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2371 (IMM24_PCREL): Likewise.
2373 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2375 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2376 address for an extended PC relative instruction that is not a
2379 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2381 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2384 start-sanitize-tic80
2385 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2387 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2388 (tic80_opcodes): Sort entries so that long immediate forms
2389 come after short immediate forms, making it easier for
2390 assembler to select the right one for a given operand.
2393 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2395 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2397 (print_insn_mips16): Likewise.
2399 start-sanitize-r5900
2400 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2402 * mips-opc.c: add r5900.
2405 start-sanitize-tic80
2406 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2408 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2409 a symbol class that restricts translation to just that
2410 class (general register, condition code, etc).
2412 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2414 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2415 and REG_DEST_E for register operands that have to be
2416 an even numbered register. Add REG_FPA for operands that
2417 are one of the floating point accumulator registers.
2418 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2419 (tic80_opcodes): Change entries that need even numbered
2420 register operands to use the new operand table entries.
2421 Add "or" entries that are identical to "or.tt" entries.
2424 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2426 * mips16-opc.c: Add new cases of exit instruction for
2428 * mips-dis.c (print_mips16_insn_arg): Display floating point
2429 registers in operands of exit instruction. Print `$' before
2430 register names in operands of entry and exit instructions.
2432 start-sanitize-tic80
2433 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2435 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2436 pairs for all predefined symbols recognized by the assembler.
2437 Also used by the disassembling routines.
2438 (tic80_symbol_to_value): New function.
2439 (tic80_value_to_symbol): New function.
2440 * tic80-dis.c (print_operand_control_register,
2441 print_operand_condition_code, print_operand_bitnum):
2442 Remove private tables and use tic80_value_to_symbol function.
2445 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2447 * d10v-dis.c (print_operand): Change address printing
2448 to correctly handle PC wrapping. Fixes PR11490.
2450 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2452 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2455 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2457 * mips-dis.c (print_insn_mips16): Set insn_info information.
2458 (print_mips16_insn_arg): Likewise.
2460 * mips-dis.c (print_insn_mips16): Better handling of an extend
2461 opcode followed by an instruction which can not be extended.
2463 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2465 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2466 coldfire moveb instruction to not allow an address register as
2467 destination. Although the documentation does not indicate that
2468 this is invalid, experiments uncovered unexpected behavior.
2469 Added a comment explaining the situation. Thanks to Andreas
2470 Schwab for pointing this out to me.
2472 start-sanitize-tic80
2473 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2475 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2476 entries are presorted so that entries with the same mnemonic are
2477 adjacent to each other in the table. Sort the entries for each
2478 instruction so that this is true.
2481 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2483 * m68k-dis.c: Include <libiberty.h>.
2484 (print_insn_m68k): Sort the opcode table on the most significant
2485 nibble of the opcode.
2487 start-sanitize-tic80
2488 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2490 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2491 "vsub", "vst", "xnor", and "xor" instructions.
2492 (V_a1): Renamed from V_a, msb of accumulator reg number.
2493 (V_a0): Add macro, lsb of accumulator reg number.
2495 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2497 * tic80-dis.c (print_insn_tic80): Broke excessively long
2498 function up into several smaller ones and arranged for
2499 the instruction printing function to be callable recursively
2500 to print vector instructions that have both a load and a
2501 math instruction packed into a single opcode.
2502 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2503 to explain why it comes after the other vector opcodes.
2506 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2508 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2509 move insns to handle immediate operands.
2511 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2513 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2514 fix operand mask in the "moveml" entries for the coldfire.
2516 start-sanitize-tic80
2517 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2520 New macros for building vector instruction opcodes.
2521 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2522 FMT_LI, which were unused. The field is now a flags field.
2523 Remove some opcodes that are possible, but illegal, such
2524 as long immediate instructions with doubles for immediate
2525 values. Add "vadd" and "vld" instructions.
2527 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2529 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2530 the order more logical. Move the shift alias instructions ("rotl",
2531 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2532 interspersed with the regular sr.x and sl.x instructions. Add
2533 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2534 "sub", "subu", "swcr", and "trap".
2536 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2538 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2539 (OFF_SL_PC): Renamed from OFF_SL.
2540 (OFF_SS_BR): New operand type for base relative operand.
2541 (OFF_SL_BR): New operand type for base relative operand.
2542 (REG_BASE): New operand type for base register operand.
2543 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2544 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2545 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2547 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2548 10 char field, padded with spaces on rhs, rather than a string
2549 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2550 than old TIC80_OPERAND_RELATIVE. Add support for new
2551 TIC80_OPERAND_BASEREL flag bit.
2553 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2555 * tic80-dis.c (print_insn_tic80): Print floating point operands
2557 * tic80-opc.c (SPFI): Add single precision floating point
2558 immediate operand type.
2559 (ROTATE): Add rotate operand type for shifts.
2560 (ENDMASK): Add for shifts.
2561 (n): Macro for the 'n' bit.
2562 (i): Macro for the 'i' bit.
2563 (PD): Macro for the 'PD' field.
2564 (P2): Macro for the 'P2' field.
2565 (P1): Macro for the 'P1' field.
2566 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2570 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2572 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2573 adding in current address for pc-relative operands.
2575 start-sanitize-tic80
2576 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2578 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2579 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2580 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2581 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2582 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2583 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2584 (REG_SCALED, LSI_SCALED): New operand types.
2585 (E): New macro for 'E' bit at bit 27.
2586 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2587 opcodes, including the various size flavors (b,h,w,d) for
2588 the direct load and store instructions.
2590 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2592 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2594 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2595 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2596 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2597 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2598 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2599 masks with "MASK_* & ~M_*" to get the M bit reset.
2600 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2602 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2604 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2605 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2606 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2608 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2609 CC, SICR, and LICR table entries.
2610 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2611 "bcnd", and "brcr" opcodes.
2614 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2616 * ppc-opc.c (powerpc_operands): Make comment match the
2617 actual fields (no shift field).
2618 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2619 start-sanitize-tic80
2620 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2621 partial implementation, work in progress.
2622 * tic80-opc.c (tic80_operands): Begin construction operands table.
2623 (tic80_opcodes): Continue populating opcodes table and start
2624 filling in the operand indices.
2625 (tic80_num_opcodes): Add this.
2628 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2630 * m68k-opc.c: Add #B case for moveq.
2632 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2634 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2635 before they are used.
2637 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2639 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2640 for "breakpoint" instruction.
2642 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2644 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2645 (dep): Use ALL_CFLAGS rather than CFLAGS.
2647 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2649 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2652 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2654 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2655 start-sanitize-tic80
2656 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2659 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2661 * mips16-opc.c: Add "abs".
2663 start-sanitize-tic80
2664 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2666 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2667 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2668 (disassembler): Add bfd_arch_tic80 support to set disassemble
2669 to print_insn_tic80.
2670 * tic80-dis.c (print_insn_tic80): Add stub.
2672 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2674 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2675 * configure: Regenerate with autoconf.
2676 * tic80-dis.c: Add file.
2677 * tic80-opc.c: Add file.
2680 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2682 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2684 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2686 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2687 (mn10200_opcodes): Use it for some logicals and btst insns.
2688 Add "break" and "trap" instructions.
2690 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2692 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2694 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2696 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2697 relative load or add now depends upon whether the instruction is
2700 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2702 * mn10200-dis.c: Finish writing disassembler.
2703 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2704 Fix mask for "jmp (an)".
2706 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2707 handle endianness issues for mn10300.
2709 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2711 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2713 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2714 instruction. Fix opcode field for "movb (imm24),dn".
2716 * mn10200-opc.c (mn10200_operands): Fix insertion position
2719 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2721 * mn10200-opc.c: Create mn10200 opcode table.
2722 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2723 but moving along nicely.
2725 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2727 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2729 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2731 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2732 specifiers for fmovem* instructions.
2734 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2736 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2738 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2740 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2743 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2745 * mn10300-opc.c: Add some comments explaining the various
2748 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2750 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2752 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2755 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2756 operand specifiers in fmovm* instructions.
2758 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2760 * ppc-opc.c (insert_li): Give an error if the offset has the two
2761 least significant bits set.
2763 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2765 * mips-dis.c (print_insn_mips16): Separate the instruction from
2766 the arguments with a tab, not a space.
2768 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2770 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2773 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2776 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2778 * configure: Rebuild with autoconf 2.12.
2780 Add support for mips16 (16 bit MIPS implementation):
2781 * mips16-opc.c: New file.
2782 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2783 (mips16_reg_names): New static array.
2784 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2785 after seeing a 16 bit symbol.
2786 (print_insn_little_mips): Likewise.
2787 (print_insn_mips16): New static function.
2788 (print_mips16_insn_arg): New static function.
2789 * mips-opc.c: Add jalx instruction.
2790 * Makefile.in (mips16-opc.o): New target.
2791 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2792 * configure: Rebuild.
2794 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2796 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2797 operand specifiers in *save, *restore and movem* instructions.
2799 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2802 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2803 register operands for immediate arithmetic, not, neg, negx, and
2804 set according to condition instructions.
2806 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2807 specifier of the effective-address operand in immediate forms of
2808 arithmetic instructions. The specifier for the immediate operand
2809 notes how and where the constant will be stored.
2811 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2813 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2816 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2819 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2821 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2823 * mn10300-dis.c (disassemble): Handle register lists.
2825 * mn10300-opc.c: Fix handling of register list operand for
2826 "call", "ret", and "rets" instructions.
2828 * mn10300-dis.c (disassemble): Print PC-relative and memory
2829 addresses symbolically if possible.
2830 * mn10300-opc.c: Distinguish between absolute memory addresses,
2831 pc-relative offsets & random immediates.
2833 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2835 (disassemble): Handle SPLIT and EXTENDED operands.
2837 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2839 * mn10300-dis.c: Rough cut at printing some operands.
2841 * mn10300-dis.c: Start working on disassembler support.
2842 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2844 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2846 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2848 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2850 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2852 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2854 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2855 register argument is calls and jmp instructions.
2857 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2859 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2860 getx operand. Fix opcode for mulqu imm,dn.
2862 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2864 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2865 in MN10300_OPERAND_SPLIT operands for how many bits
2866 appear in the basic insn word. Add IMM32_HIGH24,
2867 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2868 (mn10300_opcodes): Use new operands as needed.
2870 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2871 for bset, bclr, btst instructions.
2872 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2874 * mn10300-opc.c (mn10300_operands): Remove many redundant
2875 operands. Update opcode table as appropriate.
2876 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2877 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2879 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2881 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2882 operands (for indexed load/stores). Fix bitpos for DI
2883 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2884 few instructions that insert immediates/displacements in the
2885 middle of the instruction. Add IMM8E for 8 bit immediate in
2886 the extended part of an instruction.
2887 (mn10300_operands): Use new opcodes as appropriate.
2889 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2891 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2892 sequential so the assembler never parallelizes it with
2895 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2897 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2898 a data/address register that appears in register field 0
2899 and register field 1.
2900 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2902 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2904 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2905 standard disassembly.
2907 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2908 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2909 Recategorize PALcode instructions.
2911 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2913 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2915 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2917 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2918 there are no operand types.
2920 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2922 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2924 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2926 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2928 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2930 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2932 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2933 and sst.w instructions.
2935 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2938 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2940 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2943 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2945 * ppc-opc.c (PPCPWR2): Define.
2946 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2949 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2951 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2952 field for movhu instruction.
2954 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2955 cast value to "long" not "signed long" to keep hpux10
2958 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2963 * mn10300-opc.c (FMT*): Remove definitions.
2965 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2966 for shift-by-register opcodes.
2968 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2969 into [AD][MN][01] for encoding the position of the register
2972 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2974 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2975 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2977 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2979 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2980 Fix various typos. Add "PAREN" operand.
2981 (MEM, MEM2): Define.
2982 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2983 operands. Fix several typos.
2985 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2988 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2991 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2993 (mn10300_opcodes): Break opcode format out into its own field.
2994 Update many operand fields to deal with signed vs unsigned
2995 issues. Fix one or two typos in the "mov" instruction
2996 opcode, mask and/or operand fields.
2998 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3000 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3001 m68851 wasn't reset.
3003 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3005 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3006 all opcodes. Very rough cut at operands for all opcodes.
3008 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3011 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3013 * mn10200-opc.c, mn10300-opc.c: New files.
3014 * mn10200-dis.c, mn10300-dis.c: New files.
3015 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3016 * disassemble.c: Break mn10x00 support into 10200 and 10300
3018 * configure.in: Likewise.
3019 * configure: Rebuilt.
3021 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3023 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3025 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3027 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3029 * disassemble (ARCH_mn10x00): Define.
3030 (disassembler): Handle bfd_arch_mn10x00.
3031 * configure.in: Recognize bfd_mn10x00_arch.
3032 * configure: Rebuilt.
3034 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3036 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3037 accordingly. Don't declare functions using op_rtn.
3039 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3041 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3042 params to be more standard.
3043 * (disassemble): Print absolute addresses and symbolic names for
3044 branch and jump targets.
3045 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3047 * (v850_opcodes): Add breakpoint insn.
3049 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3051 * m68k-opc.c: Move the fmovemx data register cases before the
3052 other cases, so that they get recognized before the data register
3053 does gets treated as a degenerate register list.
3055 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3057 * mips-opc.c: Add a case for "div" and "divu" with two registers
3058 and a destination of $0.
3060 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3062 * mips-dis.c (print_insn_arg): Add prototype.
3063 (_print_insn_mips): Ditto.
3065 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3067 * mips-dis.c (print_insn_arg): Print condition code registers as
3070 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3072 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3074 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3076 * v850-dis.c (disassemble): Make static. Provide prototype.
3078 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3080 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3083 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3085 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3086 ']' characters into the output stream.
3087 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3088 Add "memop" field to all opcodes (for the disassembler).
3089 Reorder opcodes so that "nop" comes before "mov" and "jr"
3090 comes before "jarl".
3092 * v850-dis.c (print_insn_v850): Fix typo in last change.
3094 * v850-dis.c (print_insn_v850): Properly handle disassembling
3095 a two byte insn at the end of a memory region when the memory
3096 region's size is only two byte aligned.
3098 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3100 * v850-dis.c (v850_reg_names): Define.
3101 (v850_sreg_names, v850_cc_names): Likewise.
3102 (disassemble): Very rough cut at printing operands (unformatted).
3104 * v850-opc.c (BOP_MASK): Fix.
3105 (v850_opcodes): Fix mask for jarl and jr.
3107 * v850-dis.c: New file. Skeleton for disassembler support.
3108 * Makefile.in Remove v850 references, they're not needed here.
3109 * configure.in: Add v850-dis.o when building v850 toolchains.
3110 * configure: Rebuilt.
3111 * disassemble.c (disassembler): Call v850 disassembler.
3113 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3114 (insert_d8_6, extract_d8_6): New functions.
3115 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3116 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3118 (IF4A, IF4B): Use "D7" instead of "D7S".
3119 (IF4C, IF4D): Use "D8_7" instead of "D8".
3120 (IF4E, IF4F): New. Use "D8_6".
3121 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3122 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3124 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3125 (v850_operands): Change D16 to D16_15, use special insert/extract
3126 routines. New new D16 that uses the generic insert/extract code.
3127 (IF7A, IF7B): Use D16_15.
3128 (IF7C, IF7D): New. Use D16.
3129 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3131 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3132 message. Issue an error if the branch offset is odd.
3134 * v850-opc.c: Add notes about needing special insert/extract
3135 for all the load/store insns, except "ld.b" and "st.b".
3137 * v850-opc.c (insert_d22, extract_d22): New functions.
3138 (v850_operands): Use insert_d22 and extract_d22 for
3140 (insert_d9): Fix range check.
3142 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3144 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3145 and set bits field to D9 and D22 operands.
3147 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3149 * v850-opc.c (v850_operands): Define SR2 operand.
3150 (v850_opcodes): "ldsr" uses R1,SR2.
3152 * v850-opc.c (v850_opcodes): Fix opcode specs for
3153 sld.w, sst.b, sst.h, sst.w, and nop.
3155 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3157 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3158 end of the opcode table.
3160 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3162 * d10v-opc.c (pre_defined_registers): Added register pairs,
3163 "r0-r1", "r2-r3", etc.
3165 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3167 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3168 Create I16U for an unsigned 16bit mmediate operand.
3169 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3171 * v850-opc.c (v850_operands): Define EP operand.
3172 (IF4A, IF4B, IF4C, IF4D): Use EP.
3174 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3175 with immediate operand, "movhi". Tweak "ldsr".
3177 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3178 correct. Get sld.[bhw] and sst.[bhw] closer.
3180 * v850-opc.c (v850_operands): "not" is a two byte insn
3182 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3184 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3186 * v850-opc.c (two): Get order of words correct.
3188 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3190 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3191 register source and destination operands.
3192 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3194 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3195 same thinko in "trap" opcode.
3197 * v850-opc.c (v850_opcodes): Add initializer for size field
3200 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3201 Add D8 for 8-bit unsigned field in short load/store insns.
3202 (IF4A, IF4D): These both need two registers.
3203 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3204 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3205 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3206 for "ldsr" and "stsr".
3207 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3210 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3211 short store word (sst.w).
3213 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3215 * v850-opc.c (v850_operands): Added insert and extract fields,
3216 pointers to functions that handle unusual operand encodings.
3218 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3220 * v850-opc.c (v850_opcodes): Enable "trap".
3222 * v850-opc.c (v850_opcodes): Fix order of displacement
3223 and register for "set1", "clr1", "not1", and "tst1".
3225 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3227 * v850-opc.c (v850_operands): Add "B3" support.
3228 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3231 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3233 * v850-opc.c: Close unterminated comment.
3235 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3237 * v850-opc.c (v850_operands): Add flags field.
3238 (v850_opcodes): add move opcodes.
3240 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3242 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3243 * configure: (bfd_v850v_arch) Add new case.
3244 * configure.in: (bfd_v850_arch) Add new case.
3245 * v850-opc.c: New file.
3247 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3249 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3251 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3253 * d10v-opc.c: Add additional information to the opcode
3254 table to help determinine which instructions can be done
3257 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3259 * mpw-make.sed: Update editing of include pathnames to be
3262 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3264 * arm-opc.h: Added "bx" instruction definition.
3266 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3268 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3270 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3272 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3274 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3276 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3278 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3280 * makefile.vms: Update for alpha-opc changes.
3282 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3284 * i386-dis.c (print_insn_i386): Actually return the correct value.
3285 (ONE, OP_ONE): #ifdef out; not used.
3287 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3289 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3290 Changed subi operand type to treat 0 as 16.
3292 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3294 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3297 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3299 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3300 memory transfer instructions. Add new format string entries %h and %s.
3301 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3304 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3306 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3307 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3309 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3311 * alpha-dis.c (print_insn_alpha_osf): Remove.
3312 (print_insn_alpha_vms): Remove.
3313 (print_insn_alpha): Make globally visible. Chose the register
3314 names based on info->flavour.
3315 * disassemble.c: Always return print_insn_alpha for the alpha.
3317 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3319 * d10v-dis.c (dis_long): Handle unknown opcodes.
3321 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3323 * d10v-opc.c: Changes to support signed and unsigned numbers.
3324 All instructions with the same name that have long and short forms
3325 now end in ".l" or ".s". Divs added.
3326 * d10v-dis.c: Changes to support signed and unsigned numbers.
3328 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3330 * d10v-dis.c: Change all functions to use info->print_address_func.
3332 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3334 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3335 move ccr/sr insns more strict so that the disassembler only
3336 selects them when the addressing mode is data register.
3338 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3339 * d10v-opc.c (pre_defined_registers): Declare.
3340 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3341 to pick a better name for the registers.
3343 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3345 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3346 operands for fexpand and fpmerge. From Christian Kuehnke
3347 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3349 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3351 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3352 print routine. Take new regnames and cpumask arguments.
3353 Kill the environment variable nonsense.
3354 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3355 (print_insn_alpha_vms): New function. Do VMS style regnames.
3356 * disassemble.c (disassembler): Test bfd flavour to pick
3357 between OSF and VMS routines. Default to OSF.
3359 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3361 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3362 * configure: Rebuild.
3363 * Makefile.in (install): Use @INSTALL_SHLIB@.
3365 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3367 * configure: (bfd_d10v_arch) Add new case.
3368 * configure.in: (bfd_d10v_arch) Add new case.
3369 * d10v-dis.c: New file.
3370 * d10v-opc.c: New file.
3371 * disassemble.c (disassembler) Add entry for d10v.
3373 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3375 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3376 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3378 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3380 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3381 distinguish between variants of the instruction set.
3382 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3383 distinguish between variants of the instruction set.
3385 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3387 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3388 the 8086 instruction set.
3389 * i386-dis.c: General cleanups. Make most things static. Add
3390 prototypes. Get rid of static variables aflags and dflags. Pass
3391 them as args (to almost everything).
3393 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3395 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3397 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3399 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3400 if the next arg is marked with SRC_IN_DST. Gross.
3402 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3403 we're looking for and find EXR.
3405 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3406 if we're looking for KBIT and we don't find it.
3408 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3411 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3412 3bit immediate operands.
3414 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3416 * Released binutils 2.7.
3418 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3419 <kkaempf@progis.ac-net.de>.
3421 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3423 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3425 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3427 * sparc-dis.c (print_insn_sparclite): New routine to print
3428 sparclite instructions.
3430 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3432 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3434 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3436 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3437 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3438 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3440 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3442 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3443 Use autoconf-set values.
3444 (docdir, oldincludedir): Removed.
3445 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3447 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3449 * alpha-opc.c: New file.
3450 * alpha-opc.h: Remove.
3451 * alpha-dis.c: Complete rewrite to use new opcode table.
3452 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3453 * configure: Rebuild with autoconf 2.10.
3454 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3455 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3457 (alpha-opc.o): New target.
3459 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3462 Set imm_added_to_rs1 even if the source and destination register
3465 * sparc-opc.c: Add some two operand forms of the wr instruction.
3467 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3469 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3472 * disassemble.c (disassembler): Handle H8/S.
3473 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3475 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3477 * sparc-opc.c: Add beq/teq as aliases for be/te.
3479 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3480 <sergei@msil.sps.mot.com>.
3482 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3484 * makefile.vms: New file.
3486 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3488 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3490 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3493 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3495 * i386-dis.c (OP_OFF): Call append_prefix.
3497 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3499 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3500 unsigned long to silence a warning from the Solaris PowerPC
3503 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3505 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3507 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3509 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3511 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3512 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3513 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3514 cpush, cpusha, cpull sparclet insns.
3516 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3518 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3520 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3522 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3523 Set F_FLOAT on other floating point instructions.
3525 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3527 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3529 (powerpc_opcodes): Add 860/821 specific SPRs.
3531 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * configure.in: Permit --enable-shared to specify a list of
3534 directories. Set and substitute BFD_PICLIST.
3535 * configure: Rebuild.
3536 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3537 uses. Set to @BFD_PICLIST@.
3539 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3541 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3542 not "abs", which may be needed for the absolute in something
3543 like btst #0,@10:8. Print L_3 immediates separately from other
3544 immediates. Change ABSMOV reference to ABS8MEM.
3546 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3548 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3549 (current_arch_mask): New static global.
3550 (compute_arch_mask): New static function.
3551 (print_insn_sparc): Delete sparc_v9_p. New static local
3552 current_mach. Resort opcode table if current_mach changes.
3553 Generalize "insn not supported" test.
3554 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3555 Delete test for v9/!v9.
3556 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3558 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3559 (brfcx): Renamed to FBRX.
3560 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3561 coprocessor mnemonics are not supported on the sparclet).
3562 (condf): Renamed to CONDF.
3563 (SLCBCC2): Delete F_ALIAS flag.
3565 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3567 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3568 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3570 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3572 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3573 that the shared library version number is set correctly.
3575 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3577 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3578 Miles Bader <miles@gnu.ai.mit.edu>.
3579 * configure: Rebuild.
3581 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3583 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3586 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3588 * configure: Rebuild with autoconf 2.8.
3590 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3592 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3593 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3595 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3597 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3598 since they appear as targets in Makefile.in.
3599 * configure: Rebuild.
3601 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3603 * mpw-make.sed: Edit out shared library support bits.
3605 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3607 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3608 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3609 (sparc_opcodes): Add sparclet insns.
3610 (sparclet_cpreg_table): New static local.
3611 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3612 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3614 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3616 * i386-dis.c (index16): New static variable.
3617 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3619 (OP_indirE): Return result of OP_E.
3620 (OP_E): Check for 16 bit addressing mode, and disassemble
3621 correctly. Optimised 32 bit case a little. Don't print
3622 "(base,index,scale)" when sib specifies only an offset.
3624 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3626 * configure.in: Set and substitute SHLIB_DEP.
3627 * configure: Rebuild.
3628 * Makefile.in (SHLIB_DEP): New variable.
3629 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3630 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3631 COMMON_SHLIB, add them to piclist with appropriate modifications.
3632 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3633 here: just use piclist.
3635 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3637 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3638 (print_insn_sparc): Rewrite v9/not-v9 tests.
3639 (compare_opcodes): Likewise.
3640 * sparc-opc.c (MASK_<ARCH>): Define.
3641 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3642 (sparclet,v6notv9): Define.
3643 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3644 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3646 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3648 * configure.in: Call AC_PROG_CC before configure.host.
3649 * configure: Rebuild.
3651 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3653 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3655 * i386-dis.c (onebyte_has_modrm): New static array.
3656 (twobyte_has_modrm): New static array.
3657 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3659 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3661 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3664 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3666 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3669 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3671 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3672 m68010up, not just m68020up | cpu32.
3674 * Makefile.in (SONAME): New variable.
3675 ($(SHLINK)): Make a link to the transformed name, as well.
3676 (stamp-tshlink): New target.
3677 (install): Skip stamp-tshlink during install.
3679 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3681 * configure.in: Call AC_ARG_PROGRAM.
3682 * configure: Rebuild.
3683 * Makefile.in (program_transform_name): New variable.
3684 (install): Transform library name before installing it.
3686 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3688 * i960-dis.c (mem): Add HX dcinva instruction.
3690 Support for building as a shared library, based on patches from
3691 Alan Modra <alan@spri.levels.unisa.edu.au>:
3692 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3693 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3694 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3695 * configure: Rebuild.
3696 * Makefile.in (ALLLIBS): New variable.
3697 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3698 (COMMON_SHLIB, SHLINK): New variables.
3699 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3700 (STAGESTUFF): Remove variable.
3701 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3702 (stamp-piclist, piclist): New targets.
3703 ($(SHLIB), $(SHLINK)): New targets.
3704 ($(OFILES)): Depend upon stamp-picdir.
3705 (disassemble.o): Build twice if PICFLAG is set.
3706 (MOSTLYCLEAN): Add pic/*.o.
3707 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3708 (distclean): Remove pic and stamp-picdir.
3709 (install): Install shared libraries.
3710 (stamp-picdir): New target.
3712 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3714 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3715 Print unknown instruction as "unknown", rather than in hex.
3717 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3719 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3721 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3723 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3725 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3727 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3728 when necessary. From Ulrich Drepper
3729 <drepper@myware.rz.uni-karlsruhe.de>.
3731 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3733 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3734 sparc_num_opcodes. Update architecture enum values.
3735 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3736 (sparc_opcode_lookup_arch): New function.
3737 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3738 (sparc_opcodes): Add v9a shutdown insn.
3740 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3742 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3743 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3745 (print_insn_sparc64): Deleted.
3746 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3749 * sparc-opc.c (architecture_pname): Add v9a.
3751 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3753 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3754 incorrectly defined as 0x16 when it should be 0x15.
3755 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3756 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3757 excb (exception barrier) which is defined in the Alpha
3758 Architecture Handbook version 2.
3759 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3760 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3761 disassembled as or, for example.
3763 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3765 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3766 (_print_insn_mips): Change i from int to unsigned int.
3768 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3770 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3771 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3773 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3775 * i386-dis.c: Added Pentium Pro instructions.
3777 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3779 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3782 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3784 * sh-opc.h (sh_nibble_type): Added REG_B.
3785 (sh_arg_type): Added A_REG_B.
3786 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3788 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3790 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3792 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3794 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3796 * Makefile.in (distclean): Remove stamp-h. From Ronald
3797 F. Guilmette <rfg@monkeys.com>.
3799 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3801 From David Mosberger-Tang <davidm@azstarnet.com>:
3802 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3805 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3807 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3808 (sh_table): Added many SH3 opcodes.
3809 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3811 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3813 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3814 (subco,subco.): Mark this PPC, not PPCCOM.
3816 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3818 * configure: Rebuild with autoconf 2.7.
3820 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3822 * configure: Rebuild with autoconf 2.6.
3824 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3826 * configure.in: Sort list of architectures. Accept but do nothing
3827 for alliant, convex, pyramid, romp, and tahoe.
3829 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3831 * a29k-dis.c (print_special): Change num to unsigned int.
3833 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3835 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3838 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3840 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3841 * configure: Rebuilt.
3843 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3845 * configure.in: Add case for bfd_i860_arch.
3846 * configure: Rebuild.
3848 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3850 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3851 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3852 (NEXTDOUBLE): Likewise.
3853 (print_insn_m68k): Don't match fmoveml if there is more than one
3854 register in the list.
3855 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3857 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3859 * m68k-opc.c: Use #W rather than #w.
3860 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3862 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3864 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3865 and likewise for all the dbxx opcodes.
3867 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3869 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3871 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3873 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3874 the VR4100 specific instructions to the mips_opcodes structure.
3876 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3878 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3879 ugly Metrowerks bug in CW6, is fixed in CW7.
3881 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3883 * ppc-opc.c (whole file): Add flags for common/any support.
3885 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3887 * Makefile.in (BISON): Remove macro.
3888 (FLAGS_TO_PASS): Remove BISON.
3890 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3892 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3894 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3895 instructions that take no args by looking at the match mask.
3896 (print_insn_arg): Always print "%" before register names.
3897 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3898 [case '_']: Don't print "@#" before address.
3899 [case 'J']: Use "%s" as format string, not register name.
3900 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3902 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3904 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3907 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3909 From David Mosberger-Tang <davidm@azstarnet.com>
3911 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3912 (alpha_insn_set): added definitions for VAX floating point
3913 instructions (Unix compilers don't generate these, but handcoded
3914 assembly might still use them).
3916 * alpha-dis.c (print_insn_alpha): added support for disassembling
3917 the miscellaneous instructions in the Alpha instruction set.
3919 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3921 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3922 no longer create sysdep.h, sed ppc-opc.c to work around a
3923 serious Metrowerks C bug.
3924 * mpw-make.in: Remove.
3925 * mpw-make.sed: New file, used by mpw-configure to edit
3926 Makefile.in into an MPW makefile.
3928 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3930 * Makefile.in (maintainer-clean): New synonym for realclean.
3932 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3934 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3935 which use '0', '1', and '2' instead. Specify the proper size for
3936 a pmove immediate operand. Correct the pmovefd patterns to be
3937 moves to a register, not from a register.
3938 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3940 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3942 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3943 %psr, %wim, %tbr as F_NOTV9.
3945 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3947 * Makefile.in (Makefile): Just rebuild Makefile when running
3949 (config.h, stamp-h): New targets.
3950 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3951 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3952 rebuilding config.h.
3953 * configure: Rebuild.
3955 * mips-opc.c: Change unaligned loads and stores with "t,A"
3956 operands to use "t,A(b)".
3958 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3960 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3962 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3964 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3965 until 3 instead of until 2.
3967 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3969 * Makefile.in (ALL_CFLAGS): Define.
3970 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3971 (MOSTLYCLEAN): Add config.log.
3972 (distclean): Don't remove config.log.
3973 * configure.in: Substitute HDEFINES.
3974 * configure: Rebuild.
3976 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3978 * sh-opc.h (sh_arg_type): Add F_FR0.
3979 (sh_table, case fmac): Add F_FR0 as first argument.
3981 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3983 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3985 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3987 * sparc-dis.c: Remove all references to NO_V9.
3989 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * aclocal.m4: Just include ../bfd/aclocal.m4.
3992 * configure: Rebuild.
3994 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3996 * sparc-dis.c (X_DISP19): Define.
3997 (print_insn, case 'G'): Use it.
3998 (print_insn, case 'L'): Sign extend displacement.
4000 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4003 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4004 host_makefile_frag or frags.
4005 * aclocal.m4: New file.
4006 * configure: Rebuild.
4007 * Makefile.in (INSTALL): Set to @INSTALL@.
4008 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4009 (INSTALL_DATA): Set to @INSTALL_DATA@.
4011 (AR_FLAGS): Set to rc rather than qc.
4012 (CC): Define as @CC@.
4013 (CFLAGS): Set to @CFLAGS@.
4014 (@host_makefile_frag@): Remove.
4015 (config.status): Remove dependency upon @frags@.
4017 * configure.in: ../bfd/config.bfd now just sets shell variables.
4018 Use them rather than looking through target Makefile fragments.
4019 * configure: Rebuild.
4021 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4023 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4025 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4027 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4028 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4031 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4032 (lookup_{name,value}): New functions.
4033 (prefetch_table): New static local.
4034 (sparc_{encode,decode}_prefetch): New functions.
4035 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4037 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4039 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4042 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4044 * sh-dis.c: Correct comment on first line of file.
4046 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4048 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4050 * sparc-opc.c (asi, membar): New static locals.
4051 (sparc_{encode,decode}_{asi,membar}): New functions.
4052 (sparc_opcodes, membar insn): Fix.
4053 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4054 Support decoding of membar masks.
4057 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4059 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4061 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4063 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4064 and likewise for the other branches. Add bhs as an alias for bcc,
4065 and likewise for the size variants. Add dbhs as an alias for
4068 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4070 * sh-opc.h (FP sts instructions): Update to match reality.
4072 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4074 * m68k-dis.c: (fpcr_names): Add % before all register names.
4075 (reg_names): Likewise.
4076 (print_insn_arg): Don't explicitly print % before register names.
4077 Add % before register names in static array names. In case 'r',
4078 print data registers as `@(Dn)', not `Dn@'. When printing a
4079 memory address, don't print @# before it.
4080 (print_indexed): Change base_disp and outer_disp from int to
4081 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4082 syntax. Sign extend 8 byte displacement correctly.
4083 (print_base): Print using MIT syntax. Print zpc when appropriate.
4084 Change parameter disp from int to bfd_vma.
4086 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4089 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4091 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4092 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4093 * sh-opc.h (sh_arg_type): Add new operand types.
4094 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4096 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4098 * Makefile.in (distclean): Remove generated file config.h.
4100 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4102 * Makefile.in (distclean): Remove generated file config.h.
4104 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4106 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4108 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4110 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4111 rather than numopcodes. Use m68k_opcodes rather than removed
4112 opcode function. Don't check F_ALIAS.
4113 (print_insn_arg): Change first parameter to be const char *.
4114 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4115 (m68k-opc.o): New target.
4116 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4117 * configure: Rebuild.
4119 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4121 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4122 (opcode_bits, opcode_hash_table): New variables.
4123 (opcodes_initialized): Renamed from opcodes_sorted.
4124 (build_hash_table): New function.
4125 (is_delayed_branch): Use hash table.
4126 (print_insn): Renamed from print_insn_sparc, made static.
4127 Build and use hash table. If !sparc64, ignore sparc64 insns,
4128 and vice-versa if sparc64.
4129 (print_insn_sparc, print_insn_sparc64): New functions.
4130 (compare_opcodes): Move sparc64 opcodes to end.
4131 Print commutative insns with constant second.
4132 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4134 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4136 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4137 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4138 avoids printing a delay slot in a delay slot.
4139 * sh-opc.h (sh_table): Fully bracket last entry.
4141 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4143 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4145 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4147 * configure.in: Get host_makefile_frag from ${srcdir}.
4149 * configure.in: Autoconfiscated. Check for string[s].h. Create
4150 config.h from config.in. Don't set up sysdep.h link.
4151 * sysdep.h: New file.
4152 * configure, config.in: New files, generated from configure.in.
4153 * Makefile.in: Updated to be processed autoconf-style.
4154 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4155 (Makefile): Depend on config.status.
4156 (config.status): New rule.
4157 * configure.bat: Update Makefile substitutions.
4159 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4161 * mips-opc.c (L1): Define.
4162 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4163 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4166 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4168 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4169 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4170 have multiple add units but only a single logical unit.
4172 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4173 shifted by 18, without any insertion or extraction function.
4174 (insert_cr, extract_cr): Remove.
4176 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4178 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4181 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4183 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4184 * sh-opc.h: Add copyright.
4186 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4188 * Makefile.in (crunch-m68k): Delete extra target accidentally
4189 checked in a while ago.
4191 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4193 * sh-opc.h (sh_table): Add SH3 support.
4195 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4197 * sh-opc.h: Added bsrf and braf.
4199 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4201 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4202 bogus [ls]fm{ea,fd} patterns.
4204 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4205 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4206 initialize it from memory. Make function static.
4207 (print_insn_{big,little}_arm): New functions.
4208 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4209 the correct endianness.
4211 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4213 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4216 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4218 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4219 17th, so that it builds again using GCC as the compiler.
4221 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4223 * mips-dis.c (print_insn_little_mips): Cast return value from
4224 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4225 expects an unsigned long, and that might be fewer words of
4226 argument storage (e.g., if bfd_vma is long long on a 32-bit
4228 (print_insn_big_mips): Likewise with bfd_getb32 value.
4229 (_print_insn_mips): Now static.
4231 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4233 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4234 gcc memory hog problem with initializer is fixed.
4236 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4238 Merge in support for Mac MPW as a host.
4239 (Old change descriptions retained for informational value.)
4241 * mpw-config.in (archname): Compute from the config.
4242 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4244 * mpw-config.in (target_arch): Compute from canonical target.
4245 (m68k, mips, powerpc, sparc): Add architectures.
4246 * mpw-make.in (disassemble.c.o): Add.
4247 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4249 * mpw-config.in (BFD_MACHINES): Set to a default value.
4250 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4252 * mpw-make.in (CSEARCH): Add extra-include to search path.
4254 * mpw-config.in (varargs.h): Don't create.
4255 (sysdep.h): Create using forward-include.
4256 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4258 * mpw-config.in: New file, MPW version of configure.in.
4259 * mpw-make.in: New file, MPW version of Makefile.in.
4261 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4263 * alpha-dis.c (print_insn_alpha): Put empty statement after
4266 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4268 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4269 (low_sign_extend): Likewise.
4270 (get_field): Delete unused function.
4271 (set_field, deposit_14, deposit_21): Likewise.
4273 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4275 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4278 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4280 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4282 * alpha-opc.h (OSF_ASMCODE): define
4283 print pal-code names as defined in App C of the
4284 Alpha Architecture Reference Manual
4286 * alpha-dis.c: cleaned up output
4287 print stylized code forms as defined in App A.4.3 of the
4288 Alpha Architecture Reference Manual
4290 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4292 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4294 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4297 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4299 * m68k-dis.c (opcode): New function. Returns address of opcode
4300 table entry given index, even if the opcode table was split to
4301 work around gcc bugs.
4302 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4304 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4305 (reg_names): Now const.
4306 (print_insn_arg): Arrays cacheFieldName and names now const.
4307 (print_indexed): Array scales now const.
4309 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4311 * ppc-opc.c: Sort recently added instructions by minor opcode
4312 number within major opcode number.
4314 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4316 * hppa-dis.c: Include libhppa.h.
4318 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4320 * mips-opc.c: Change dli to use M_DLI, and add dla.
4322 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4324 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4326 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4328 * mips-opc.c: Add r4650 mul instruction.
4330 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4332 * mips-opc.c: Add uld and usd macros for unaligned double load and
4335 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4337 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4338 mfdcr, mtdcr, icbt, iccci.
4340 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4342 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4343 signed char fields to shorts, more portable.
4345 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4347 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4348 char fields as signed chars, since they may have negative values.
4350 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4352 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4353 (mycroft@netbsd.org).
4355 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4357 From "Logg, Ed" <elogg@ea.com>:
4358 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4359 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4362 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4364 * ppc-opc.c: Changes based on patch from David Edelsohn
4365 <edelsohn@mhpcc.edu>.
4366 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4369 (insert_tbr): New static function.
4370 (extract_tbr): New static function.
4371 (XFXFXM_MASK, XFXM): Define.
4372 (XSPRBAT_MASK, XSPRG_MASK): Define.
4373 (powerpc_opcodes): Add instructions to access special registers by
4374 name. Add mtcr and mftbu.
4376 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4378 * mips-opc.c (P3): Define.
4379 (mips_opcodes): Add mad and madu.
4381 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4383 * configure.in: Add W65 support.
4384 * disassemble.c: Likewise.
4385 * w65-opc.h, w65-dis.c: New files.
4387 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4389 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4392 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4394 * mips-opc.c: Add dli as a synonym for li.
4396 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4398 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4399 print something for reserved opcode values, even if it won't
4402 * mips-dis.c (_print_insn_mips): When initializing, shift right
4403 and mask, to avoid sign extension problems on the Alpha.
4405 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4408 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4410 * sh-opc.h (mov.l gbr): Get direction right.
4411 * sh-dis.c (print_insn_shx): New function.
4412 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4413 print opcodes with right byte order.
4415 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4417 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4418 to avoid conflicts with getopt.
4420 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4422 * hppa-dis.c (print_insn_hppa): Read the instruction using
4423 bfd_getb32, so that it works on a little endian or 64 bit host.
4424 Remove unused local variable op.
4426 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4428 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4429 addu does not work correctly if -mips3.
4431 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4433 * a29k-dis.c (print_special): Add special register names defined
4434 on 29030, 29040 and 29050.
4435 (print_insn): Handle new operand type 'I'.
4437 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4439 * Makefile.in (INSTALL): Use top level install.sh script.
4441 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4443 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4444 that it works on a little endian host.
4446 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4448 * configure.in: Use ${config_shell} when running config.bfd.
4450 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4452 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4454 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4456 * a29k-dis.c (print_insn): Print the opcode.
4458 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4460 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4462 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4464 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4466 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4468 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4469 which store a value into memory.
4471 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4473 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4474 * arm-dis.c, arm-opc.h: New files.
4476 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4478 * Makefile.in (ns32k-dis.o): Add dependency.
4479 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4480 string, not as array of chars.
4482 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4484 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4486 * sparc-opc.c: Added sparclite extended FP operations, and
4487 versions of v9 impdep* instructions permitting specification of
4490 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4492 * i960-dis.c (reg_names): Now const.
4493 (struct sparse_tabent): New type, copied from array type in mem
4495 (ctrl): Local static array ctrl_tab now const.
4496 (cobr): Local static array cobr_tab now const.
4497 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4498 static variable mem_tab no longer explicitly initialized. Changed
4499 mem_init to const array of struct sparse_tabent.
4500 (reg): Local static variable reg_tab no longer explicitly
4501 initialized. Changed reg_init to const array of struct
4503 (ea): Local static array scale_tab now const.
4505 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4508 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4510 * configure.bat: the disassember needs to be enabled for
4511 "objdump -d" to work in djgpp.
4513 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4515 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4516 (invalid_float): Enabled general version, doesn't require running
4517 on ns32k host. Changed to take char* argument, and test for
4518 explicitly specified sizes, instead of using sizeof() on host CPU
4520 (INVALID_FLOAT): Cast first argument.
4521 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4522 list_P032, list_M032): Now const.
4523 (optlist, list_search): Made appropriate arguments now point to
4525 (print_insn_arg): Changed static array of one-character-string
4526 pointers into a static const array of characters; fixed sprintf
4527 statement accordingly.
4529 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4531 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4532 from distribution. A ns32k-dis.c from a previous distribution has
4533 been brought up to date and supports the new interface.
4535 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4537 * configure.in: add bfd_ns32k_arch target support.
4539 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4540 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4542 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4544 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4547 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4549 * h8300-dis.c, mips-dis.c: Don't use true and false.
4551 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4553 * configure.in: Change --with-targets to --enable-targets.
4555 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4557 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4558 opcodes to the first instruction with that opcode, to speed
4559 disassembly of large files. From ralphc@pyramid.com (Ralph
4562 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4566 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4568 * configure.bat: update to latest makefile.in
4570 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4572 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4573 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4574 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4575 slot insn is in a delay slot.
4576 * z8k-opc.h: (resflg): Fix patterns.
4577 * h8500-opc.h Fix CR insn patterns.
4579 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4582 "cmpl" before POWER versions, so that gas -many uses them.
4584 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4586 * disassemble.c: New file.
4587 * Makefile.in (OFILES): Add disassemble.o.
4588 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4589 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4590 binutils/configure.in.
4592 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4593 opcode being examined.
4595 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4598 (insert_ral, insert_ram, insert_ras): New functions.
4599 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4600 RAS for store with update.
4602 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4604 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4605 (edelsohn@npac.syr.edu).
4607 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4609 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4612 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4614 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4616 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4618 * ppc-opc.c (powerpc_operands): The signedp field has been
4619 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4620 instead. Add new operand SISIGNOPT.
4621 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4622 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4623 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4626 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4628 * i386-dis.c (struct private): Renamed to dis_private. `private'
4629 is a reserved word for dynix cc.
4631 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4633 * configure.in: Change error message to refer to bfd/config.bfd
4634 rather than bfd/configure.in.
4636 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4638 * ppc-opc.c: Define POWER2 as short alias flag.
4639 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4642 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4644 * i960-dis.c (print_insn_i960): Don't read a second word for
4645 opcodes 0, 1, 2 and 3.
4647 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4649 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4651 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4653 * m68881-ext.c: Removed; no longer used.
4654 * Makefile.in: Changed accordingly.
4656 * m68k-dis.c (ext_format_68881): Don't declare.
4657 (print_insn_m68k): If an instruction uses place 'i', it uses at
4658 least four fixed bytes.
4659 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4660 extended float, convert to double using floatformat_to_double, not
4661 ieee_extended_to_double, and fetch the data before converting it.
4663 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4666 davidj@ICSI.Berkeley.EDU (David Johnson).
4668 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4670 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4671 PowerPC uses bdnz[l][a].
4673 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4675 * dis-buf.c, i386-dis.c: Include sysdep.h.
4677 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4679 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4681 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4682 by Motorola PowerPC 601 with PPC_OPCODE_601.
4683 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4684 Disassemble Motorola PowerPC 601 instructions as well as normal
4685 PowerPC instructions.
4687 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4689 * i960-dis.c (reg, mem): Just use a static array instead of
4692 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4694 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4695 condition name index if this is for a negated condition.
4697 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4698 Floating point format for 'H' operand is backwards from normal
4699 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4700 operands (fmpyadd and fmpysub), handle bizarre register
4701 translation correctly for single precision format.
4703 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4704 or 'I' operands if the next format specifier is 'M' (fcmp
4705 condition completer).
4707 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4709 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4710 single number giving a bitmask for the MB and ME fields of an M
4711 form instruction. Change NB to accept 32, and turn it into 0;
4712 also turn 0 into 32 when disassembling. Seperated SH from NB.
4713 (insert_mbe, extract_mbe): New functions.
4714 (insert_nb, extract_nb): New functions.
4715 (SC_MASK): Mask out SA and LK bits.
4716 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4717 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4718 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4719 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4720 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4721 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4722 (powerpc_macros): Define table of macro definitions.
4723 (powerpc_num_macros): Define.
4725 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4726 if PPC_OPERAND_NEXT is set.
4728 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4730 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4731 char. Retrieve contents using bfd_getl32 instead of shifting.
4733 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4735 * ppc-opc.c: New file. Opcode table for PowerPC, including
4736 opcodes for POWER (RS/6000).
4737 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4738 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4739 (CFILES): Add ppc-dis.c.
4740 (ppc-dis.o, ppc-opc.o): New targets.
4741 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4743 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4745 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4746 No space before 'u', 'f', or 'N'.
4748 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4750 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4751 farther than we should.
4753 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4755 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4757 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4759 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4761 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4762 needs it, to prevent reading past the end of a section.
4764 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4766 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4767 Removed t,A case for la; always use t,A(b) case.
4769 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4771 From Ted Lemen <mellon@pepper.ncd.com>
4772 * mips-dis.c (print_insn_arg): Handle 'k'.
4773 * mips-opc.c: Make cache use k, not t.
4775 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4777 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4778 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4779 FLOAT_FORMAT_CODE to put out floating point register names.
4781 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4785 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4787 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4789 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4791 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4792 larger than 32. Moved dsxx32 variants first for disassembler.
4794 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4796 * z8kgen.c, z8k-opc.h: Add full lda information.
4798 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4800 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4801 movb instructions. Any necessary space will be emitted by
4802 the code to handle nullification completers.
4804 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4806 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4808 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4810 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4811 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4813 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4815 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4817 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4819 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4820 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4822 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4824 * m88k-dis.c (m88kdis): comment change. Remove space after
4826 (printop): handle new arg types DEC and XREG for m88110.
4828 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4830 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4831 type for absolute branch addresses. Delete special
4832 "ble" and "be" code in 'W' operand code.
4834 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4836 * mips-opc.c: Set hazard information correctly for branch
4837 likely instructions.
4839 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4841 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4842 info->fprintf_func for printing and info->print_address_func for
4845 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4847 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4849 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4851 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4852 Corrected second case of "b" for disassembler.
4854 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4857 to BFD swapping routines to correspond to BFD name changes.
4859 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4861 * mips-opc.c: Change div machine instruction to be z,s,t rather
4862 than s,t. Change div macro to be d,v,t rather than d,s,t.
4863 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4864 rem and remu which generates only the corresponding div
4865 instruction. This is for compatibility with the MIPS assembler,
4866 which only generates the simple machine instruction when an
4867 explicit destination of $0 is used.
4868 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4870 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4872 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4873 WR_31 hazard for bal, bgezal, bltzal.
4875 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4877 * hppa-dis.c (print_insn_hppa): Use print function
4878 from within the disassemble_info, not fprintf_filtered.
4880 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4882 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4883 Law, law@cs.utah.edu.)
4885 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4887 * mips-opc.c ("absu"): Removed.
4890 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4893 Changed hazard information to distinguish between memory load
4894 delays and coprocessor load delays.
4896 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4898 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4900 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4902 * configure.in: Don't pass cpu to config.bfd.
4904 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4906 * m88k-dis.c (m88kdis): Make class unsigned.
4908 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4910 * alpha-dis.c (print_insn_alpha): One branch format case was
4911 missing the instruction name.
4913 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4915 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4916 Add the arch-specific auxiliary files.
4917 (OFILES): Remove the arch-specific auxiliary files
4918 and use BFD_MACHINES instead of DIS_LIBS.
4919 * configure.in: Set BFD_MACHINES based on --with-targets option.
4921 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4923 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4926 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4928 * sparc-opc.c: Change CONST to const to deal with gcc
4929 -Dconst=__const -traditional.
4931 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4933 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4934 coprocessor instructions out of #if 0, and made them use new
4937 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4939 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4941 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4943 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4944 instruction, for use by the disassembler.
4946 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4947 hand-coded sign extensions that depended on 32-bit host ints.
4948 FIXME, we still depend on big-endian host bitfield ordering.
4949 (sparc_print_insn): Set the insn_info_valid field, and the
4950 other fields that describe the instruction being printed.
4952 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4954 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4955 `jmp' instead of just one of them.
4957 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4959 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4960 (fput_fp_reg_r): Renamed from fput_reg_r.
4961 (fput_fp_reg): New function.
4962 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4964 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4966 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4968 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4970 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4972 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4973 don't output a space.
4975 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4977 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4979 * mips-opc.c: New file, containing opcode table from
4980 ../include/opcode/mips.h.
4981 * Makefile.in: Add it.
4983 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4985 * m88k-dis.c: New file, moved in from gdb and changed to use the
4986 new dis-asm.h disassembler interface.
4987 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4988 (m88k-dis.o): New target.
4990 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4992 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4993 argument string const char * to correspond to opcode/mips.h.
4995 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4997 * mips-dis.c: Updated to account for name changes in new version
4999 * Makefile.in: Added header file dependencies.
5001 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5003 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5005 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5007 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5008 extend, rather than shifts.
5010 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5012 * Makefile.in: Undo 15 June change.
5014 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5016 * m68k-dis.c (print_insn_arg): Change return value to byte count
5018 * m68k-dis.c: Re-write to detect invalid operands before
5019 printing anything, so we can handle this the same way we
5020 handle invalid opcodes.
5022 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5024 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5026 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5028 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5031 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5033 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5035 * configure.in: Do make sysdep.h link.
5036 * Makefile.in: Search ../include. Don't search ../bfd.
5038 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5040 Changes from Jeff Law, law@cs.utah.edu:
5041 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5042 Do not print a space before the completers specified by
5045 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5047 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5048 defined, since gdb has been fixed.
5050 Changes from Jeff Law, law@cs.utah.edu:
5051 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5052 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5053 be a *disassemble_info, not a *FILE.
5054 * hppa-dis.c: Support 'd', '!', and 'a'.
5055 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5056 * hppa-dis.c: Delete cases which are no longer needed.
5058 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5060 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5062 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5064 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5067 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5069 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5070 * configure.in: No longer need to configure to get sysdep.h.
5072 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5074 * Patches from Jeffrey Law <law@cs.utah.edu>.
5075 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5076 templates for 1.1 FP computational instructions.
5078 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5080 * h8500-dis.c (print_insn_h8500): Address argument is type
5082 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5085 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5086 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5088 * sparc-dis.c (compare_opcodes): Move static declaration to
5091 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5093 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5094 instruction, remove unimp hack from 'l' argument.
5096 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5098 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5101 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5103 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5104 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5107 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5109 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5110 arrays of string pointers to 2-d arrays of chars, to save
5113 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5115 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5116 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5118 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5120 * hppa-dis.c: New file from Utah, adapted to new disassembler
5122 * Makefile.in: Include it.
5124 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5126 * sh-dis.c, sh-opc.h: New files.
5128 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5130 * alpha-dis.c, alpha-opc.h: New files.
5132 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5134 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5137 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5139 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5141 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5143 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5146 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5148 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5149 and double percent signs a few places.
5151 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5153 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5154 Use info->print_address_func not print_address.
5156 * dis-buf.c (generic_print_address): New function.
5158 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5160 * Makefile.in: Add sparc-dis.c.
5161 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5163 Add `add' instruction to the set that get checked
5164 for a preceding `sethi' in order to print an absolute address.
5165 * (print_insn): Disassembly prefers real instructions.
5166 (is_delayed_branch): Speed up.
5167 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5168 Still missing some float ops, and needs testing.
5169 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5170 F_ALIAS. Use printf, not fprintf, when not passing a file
5172 (compare_opcodes): Check that identical instructions have
5173 identical opcodes, complain otherwise.
5176 * Include reg_names.
5178 Use dis-asm.h/read_memory_func interface.
5180 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5182 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5183 deliberately return non-zero to setjmp from longjmp. Otherwise
5184 this code fails to compile.
5186 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5188 * m68k-dis.c: Fix prototype for fetch_arg().
5190 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5192 * dis-buf.c: New file, for new read_memory_func interface.
5193 Makefile.in (OFILES): Include it.
5194 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5195 Use new read_memory_func interface.
5197 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5199 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5200 * h8500-opc.h: Fix couple of opcodes.
5202 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5204 * Makefile.in: add dvi & installcheck targets
5206 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5208 * Makefile.in: Update for h8500-dis.c.
5210 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5212 * h8500-dis.c, h8500-opc.h: New files
5214 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5216 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5217 ../include/dis-asm.h.
5218 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5219 and ../gdb/m68k-pinsn.c).
5220 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5221 and ../gdb/i386-pinsn.c).
5222 * m68881-ext.c: New file. Moved definition of
5223 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5224 * Makefile.in: Adjust for new files.
5225 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5226 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5227 can be dis-assembled.
5229 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5231 * mips-dis.c (print_insn_arg): Now returns void.
5233 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5235 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5236 files that use the macros.
5238 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5240 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5241 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5242 (CFILES): Added mips-dis.c.
5244 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5246 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5247 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5249 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5251 * Makefile.in: Improve *clean rules.
5252 * configure.in: Allow a default host.
5254 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5256 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5257 files include other sysdep files
5259 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5261 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5263 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5265 * configure.in: For host support, use ../bfd/configure.host
5266 so it stays in sync with the ../bfd/hosts database.
5268 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5270 * configure.in: use cpu-vendor-os triple instead of nested cases
5272 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5274 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5275 *always* the wrong one.
5277 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5279 * z8kgen.c: added copyright info
5281 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5283 * z8k-dis.c (unparse_instr): prettier tabs
5284 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5286 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5288 * configure.in: Add ncr* configuration.
5289 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5290 picayune ANSI compilers happy.
5292 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5294 * configure.in (i386): Make i386 and i486 synonymous for now.
5295 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5297 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5299 * Makefile.in (install): Fix typo.
5301 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5303 * Makefile.in (make): Remove obsolete crud.
5304 (sparc-opc.o): Avoid Sun Make VPATH bug.
5306 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5308 * Makefile.in: since there are no SUBDIRS, remove rule and
5309 references of subdir_do.
5311 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5313 * Makefile.in (install): Get the library name right here too.
5314 Don't install bfd.h, since it's unrelated to this library. No
5315 subdirs to recurse into, either.
5316 (CFILES): The source file has a .c suffix, not .o.
5318 * sparc-opc.c: New file, moved from BFD.
5319 * Makefile.in (OFILES): Build it.
5321 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5323 * z8k-dis.c: fixed forward refferences of some declarations.
5325 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5327 * Makefile.in: get the name of the library right
5329 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5331 * z8k-dis.c: knows how to disassemble z8k stuff
5332 * z8k-opc.h: new file full of z8000 opcodes
5336 version-control: never