1 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10200-opc.c: Create mn10200 opcode table.
4 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
5 but moving along nicely.
7 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
9 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
11 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
13 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
14 specifiers for fmovem* instructions.
16 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
18 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
20 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
22 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
25 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
27 * mn10300-opc.c: Add some comments explaining the various
30 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
32 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
34 * m68k-dis.c (print_insn_arg): Handle new < and > operand
37 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
38 operand specifiers in fmovm* instructions.
40 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
42 * ppc-opc.c (insert_li): Give an error if the offset has the two
43 least significant bits set.
45 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
47 * mips-dis.c (print_insn_mips16): Separate the instruction from
48 the arguments with a tab, not a space.
50 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
52 * mn10300-dis.c (disasemble): Finish conversion to '$' as
55 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
58 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
60 * configure: Rebuild with autoconf 2.12.
62 Add support for mips16 (16 bit MIPS implementation):
63 * mips16-opc.c: New file.
64 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
65 (mips16_reg_names): New static array.
66 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
67 after seeing a 16 bit symbol.
68 (print_insn_little_mips): Likewise.
69 (print_insn_mips16): New static function.
70 (print_mips16_insn_arg): New static function.
71 * mips-opc.c: Add jalx instruction.
72 * Makefile.in (mips16-opc.o): New target.
73 * configure.in: Use mips16-opc.o for bfd_mips_arch.
76 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
78 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
79 operand specifiers in *save, *restore and movem* instructions.
81 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
84 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
85 register operands for immediate arithmetic, not, neg, negx, and
86 set according to condition instructions.
88 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
89 specifier of the effective-address operand in immediate forms of
90 arithmetic instructions. The specifier for the immediate operand
91 notes how and where the constant will be stored.
93 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
95 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
98 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
101 * mn10300-dis.c (disassemble): Prefix registers with '%'.
103 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
105 * mn10300-dis.c (disassemble): Handle register lists.
107 * mn10300-opc.c: Fix handling of register list operand for
108 "call", "ret", and "rets" instructions.
110 * mn10300-dis.c (disassemble): Print PC-relative and memory
111 addresses symbolically if possible.
112 * mn10300-opc.c: Distinguish between absolute memory addresses,
113 pc-relative offsets & random immediates.
115 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
117 (disassemble): Handle SPLIT and EXTENDED operands.
119 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
121 * mn10300-dis.c: Rough cut at printing some operands.
123 * mn10300-dis.c: Start working on disassembler support.
124 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
126 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
128 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
131 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
133 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
136 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
138 * mn10300-opc.c (mn10300_opcodes): Demand parens around
139 register argument is calls and jmp instructions.
141 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
143 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
144 getx operand. Fix opcode for mulqu imm,dn.
146 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
148 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
149 in MN10300_OPERAND_SPLIT operands for how many bits
150 appear in the basic insn word. Add IMM32_HIGH24,
151 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
152 (mn10300_opcodes): Use new operands as needed.
154 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
155 for bset, bclr, btst instructions.
156 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
158 * mn10300-opc.c (mn10300_operands): Remove many redundant
159 operands. Update opcode table as appropriate.
160 (IMM32): Add MN10300_OPERAND_SPLIT flag.
161 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
163 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
165 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
166 operands (for indexed load/stores). Fix bitpos for DI
167 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
168 few instructions that insert immediates/displacements in the
169 middle of the instruction. Add IMM8E for 8 bit immediate in
170 the extended part of an instruction.
171 (mn10300_operands): Use new opcodes as appropriate.
174 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
176 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
177 sequential so the assembler never parallelizes it with
181 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
183 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
184 a data/address register that appears in register field 0
185 and register field 1.
186 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
188 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
190 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
191 standard disassembly.
193 * alpha-opc.c (alpha_operands): Rearrange flags slot.
194 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
195 Recategorize PALcode instructions.
198 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
200 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
203 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
205 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
206 there are no operand types.
209 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
211 * v850-opc.c (D9_RELAX): Renamed from D9, all references
213 (v850_operands): Make sure D22 immediately follows D9_RELAX.
216 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
218 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
221 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
223 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
224 and sst.w instructions.
226 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
230 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
232 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
235 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
237 * ppc-opc.c (PPCPWR2): Define.
238 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
241 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
243 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
244 field for movhu instruction.
247 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
248 cast value to "long" not "signed long" to keep hpux10
252 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
254 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
257 * mn10300-opc.c (FMT*): Remove definitions.
259 * mn10300-opc.c (mn10300_opcodes): Fix destination register
260 for shift-by-register opcodes.
262 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
263 into [AD][MN][01] for encoding the position of the register
266 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
268 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
269 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
271 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
273 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
274 Fix various typos. Add "PAREN" operand.
276 (mn10300_opcodes): Surround all memory addresses with "PAREN"
277 operands. Fix several typos.
279 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
282 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
284 * mn10300-opc.c (FMT_XX): Renumber starting at one.
285 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
287 (mn10300_opcodes): Break opcode format out into its own field.
288 Update many operand fields to deal with signed vs unsigned
289 issues. Fix one or two typos in the "mov" instruction
290 opcode, mask and/or operand fields.
292 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
294 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
297 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
299 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
300 all opcodes. Very rough cut at operands for all opcodes.
302 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
305 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
307 * mn10200-opc.c, mn10300-opc.c: New files.
308 * mn10200-dis.c, mn10300-dis.c: New files.
309 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
310 * disassemble.c: Break mn10x00 support into 10200 and 10300
312 * configure.in: Likewise.
313 * configure: Rebuilt.
315 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
317 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
319 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
321 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
323 * disassemble (ARCH_mn10x00): Define.
324 (disassembler): Handle bfd_arch_mn10x00.
325 * configure.in: Recognize bfd_mn10x00_arch.
326 * configure: Rebuilt.
328 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
330 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
331 accordingly. Don't declare functions using op_rtn.
334 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
336 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
337 params to be more standard.
338 * (disassemble): Print absolute addresses and symbolic names for
339 branch and jump targets.
340 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
342 * (v850_opcodes): Add breakpoint insn.
345 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
347 * m68k-opc.c: Move the fmovemx data register cases before the
348 other cases, so that they get recognized before the data register
349 does gets treated as a degenerate register list.
351 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
353 * mips-opc.c: Add a case for "div" and "divu" with two registers
354 and a destination of $0.
356 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
358 * mips-dis.c (print_insn_arg): Add prototype.
359 (_print_insn_mips): Ditto.
361 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
363 * mips-dis.c (print_insn_arg): Print condition code registers as
366 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
368 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
371 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
373 * v850-dis.c (disassemble): Make static. Provide prototype.
375 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
377 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
380 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
382 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
383 ']' characters into the output stream.
384 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
385 Add "memop" field to all opcodes (for the disassembler).
386 Reorder opcodes so that "nop" comes before "mov" and "jr"
389 * v850-dis.c (print_insn_v850): Fix typo in last change.
391 * v850-dis.c (print_insn_v850): Properly handle disassembling
392 a two byte insn at the end of a memory region when the memory
393 region's size is only two byte aligned.
395 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
397 * v850-dis.c (v850_reg_names): Define.
398 (v850_sreg_names, v850_cc_names): Likewise.
399 (disassemble): Very rough cut at printing operands (unformatted).
401 * v850-opc.c (BOP_MASK): Fix.
402 (v850_opcodes): Fix mask for jarl and jr.
404 * v850-dis.c: New file. Skeleton for disassembler support.
405 * Makefile.in Remove v850 references, they're not needed here
406 and they weren't being sanitized away.
407 * configure.in: Add v850-dis.o when building v850 toolchains.
408 * configure: Rebuilt.
409 * disassemble.c (disassembler): Call v850 disassembler.
411 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
412 (insert_d8_6, extract_d8_6): New functions.
413 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
414 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
416 (IF4A, IF4B): Use "D7" instead of "D7S".
417 (IF4C, IF4D): Use "D8_7" instead of "D8".
418 (IF4E, IF4F): New. Use "D8_6".
419 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
420 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
422 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
423 (v850_operands): Change D16 to D16_15, use special insert/extract
424 routines. New new D16 that uses the generic insert/extract code.
425 (IF7A, IF7B): Use D16_15.
426 (IF7C, IF7D): New. Use D16.
427 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
429 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
430 message. Issue an error if the branch offset is odd.
432 * v850-opc.c: Add notes about needing special insert/extract
433 for all the load/store insns, except "ld.b" and "st.b".
435 * v850-opc.c (insert_d22, extract_d22): New functions.
436 (v850_operands): Use insert_d22 and extract_d22 for
438 (insert_d9): Fix range check.
440 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
442 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
443 and set bits field to D9 and D22 operands.
445 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
447 * v850-opc.c (v850_operands): Define SR2 operand.
448 (v850_opcodes): "ldsr" uses R1,SR2.
450 * v850-opc.c (v850_opcodes): Fix opcode specs for
451 sld.w, sst.b, sst.h, sst.w, and nop.
453 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
455 * v850-opc.c (v850_opcodes): Add null opcode to mark the
456 end of the opcode table.
460 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
462 * d10v-opc.c (pre_defined_registers): Added register pairs,
463 "r0-r1", "r2-r3", etc.
467 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
469 * v850-opc.c (v850_operands): Make I16 be a signed operand.
470 Create I16U for an unsigned 16bit mmediate operand.
471 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
473 * v850-opc.c (v850_operands): Define EP operand.
474 (IF4A, IF4B, IF4C, IF4D): Use EP.
476 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
477 with immediate operand, "movhi". Tweak "ldsr".
479 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
480 correct. Get sld.[bhw] and sst.[bhw] closer.
482 * v850-opc.c (v850_operands): "not" is a two byte insn
484 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
486 * v850-opc.c (v850_operands): D16 inserts at offset 16!
488 * v850-opc.c (two): Get order of words correct.
490 * v850-opc.c (v850_operands): I16 inserts at offset 16!
492 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
493 register source and destination operands.
494 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
496 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
497 same thinko in "trap" opcode.
499 * v850-opc.c (v850_opcodes): Add initializer for size field
502 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
503 Add D8 for 8-bit unsigned field in short load/store insns.
504 (IF4A, IF4D): These both need two registers.
505 (IF4C, IF4D): Define. Use 8-bit unsigned field.
506 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
507 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
508 for "ldsr" and "stsr".
509 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
512 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
513 short store word (sst.w).
515 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
517 * v850-opc.c (v850_operands): Added insert and extract fields,
518 pointers to functions that handle unusual operand encodings.
520 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
522 * v850-opc.c (v850_opcodes): Enable "trap".
524 * v850-opc.c (v850_opcodes): Fix order of displacement
525 and register for "set1", "clr1", "not1", and "tst1".
527 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
529 * v850-opc.c (v850_operands): Add "B3" support.
530 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
533 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
535 * v850-opc.c: Close unterminated comment.
537 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
539 * v850-opc.c (v850_operands): Add flags field.
540 (v850_opcodes): add move opcodes.
542 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
544 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
545 * configure: (bfd_v850v_arch) Add new case.
546 * configure.in: (bfd_v850_arch) Add new case.
547 * v850-opc.c: New file.
550 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
552 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
555 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
557 * d10v-opc.c: Add additional information to the opcode
558 table to help determinine which instructions can be done
562 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
564 * mpw-make.sed: Update editing of include pathnames to be
567 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
569 * arm-opc.h: Added "bx" instruction definition.
571 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
573 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
576 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
578 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
580 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
582 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
585 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
587 * makefile.vms: Update for alpha-opc changes.
589 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
591 * i386-dis.c (print_insn_i386): Actually return the correct value.
592 (ONE, OP_ONE): #ifdef out; not used.
595 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
597 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
598 Changed subi operand type to treat 0 as 16.
601 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
603 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
606 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
608 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
609 memory transfer instructions. Add new format string entries %h and %s.
610 * arm-dis.c: (print_insn_arm): Provide decoding of the new
614 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
616 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
617 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
620 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
622 * alpha-dis.c (print_insn_alpha_osf): Remove.
623 (print_insn_alpha_vms): Remove.
624 (print_insn_alpha): Make globally visible. Chose the register
625 names based on info->flavour.
626 * disassemble.c: Always return print_insn_alpha for the alpha.
629 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
631 * d10v-dis.c (dis_long): Handle unknown opcodes.
633 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
635 * d10v-opc.c: Changes to support signed and unsigned numbers.
636 All instructions with the same name that have long and short forms
637 now end in ".l" or ".s". Divs added.
638 * d10v-dis.c: Changes to support signed and unsigned numbers.
640 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
642 * d10v-dis.c: Change all functions to use info->print_address_func.
645 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
647 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
648 move ccr/sr insns more strict so that the disassembler only
649 selects them when the addressing mode is data register.
652 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
653 * d10v-opc.c (pre_defined_registers): Declare.
654 * d10v-dis.c (print_operand): Now uses pre_defined_registers
655 to pick a better name for the registers.
658 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
660 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
661 operands for fexpand and fpmerge. From Christian Kuehnke
662 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
664 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
666 * alpha-dis.c (print_insn_alpha): No longer the user-visible
667 print routine. Take new regnames and cpumask arguments.
668 Kill the environment variable nonsense.
669 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
670 (print_insn_alpha_vms): New function. Do VMS style regnames.
671 * disassemble.c (disassembler): Test bfd flavour to pick
672 between OSF and VMS routines. Default to OSF.
674 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
676 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
677 * configure: Rebuild.
678 * Makefile.in (install): Use @INSTALL_SHLIB@.
681 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
683 * configure: (bfd_d10v_arch) Add new case.
684 * configure.in: (bfd_d10v_arch) Add new case.
685 * d10v-dis.c: New file.
686 * d10v-opc.c: New file.
687 * disassemble.c (disassembler) Add entry for d10v.
690 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
692 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
693 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
695 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
697 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
698 distinguish between variants of the instruction set.
699 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
700 distinguish between variants of the instruction set.
702 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
704 * i386-dis.c (print_insn_i8086): New routine to disassemble using
705 the 8086 instruction set.
706 * i386-dis.c: General cleanups. Make most things static. Add
707 prototypes. Get rid of static variables aflags and dflags. Pass
708 them as args (to almost everything).
710 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
712 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
714 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
716 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
717 if the next arg is marked with SRC_IN_DST. Gross.
719 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
720 we're looking for and find EXR.
722 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
723 if we're looking for KBIT and we don't find it.
725 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
728 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
729 3bit immediate operands.
731 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
733 * Released binutils 2.7.
735 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
736 <kkaempf@progis.ac-net.de>.
738 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
740 * alpha-opc.c: Correct second case of "mov" to use OPRL.
742 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
744 * sparc-dis.c (print_insn_sparclite): New routine to print
745 sparclite instructions.
747 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
749 * m68k-opc.c (m68k_opcodes): Add coldfire support.
751 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
753 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
754 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
755 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
757 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
759 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
760 Use autoconf-set values.
761 (docdir, oldincludedir): Removed.
762 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
764 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
766 * alpha-opc.c: New file.
767 * alpha-opc.h: Remove.
768 * alpha-dis.c: Complete rewrite to use new opcode table.
769 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
770 * configure: Rebuild with autoconf 2.10.
771 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
772 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
774 (alpha-opc.o): New target.
776 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
778 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
779 Set imm_added_to_rs1 even if the source and destination register
782 * sparc-opc.c: Add some two operand forms of the wr instruction.
784 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
786 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
789 * disassemble.c (disassembler): Handle H8/S.
790 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
792 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
794 * sparc-opc.c: Add beq/teq as aliases for be/te.
796 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
797 <sergei@msil.sps.mot.com>.
799 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
801 * makefile.vms: New file.
803 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
805 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
807 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
810 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
812 * i386-dis.c (OP_OFF): Call append_prefix.
814 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
816 * ppc-opc.c (instruction encoding macros): Add explicit casts to
817 unsigned long to silence a warning from the Solaris PowerPC
820 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
822 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
824 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
826 * sparc-dis.c (X_IMM,X_SIMM): New macros.
828 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
829 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
830 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
831 cpush, cpusha, cpull sparclet insns.
833 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
835 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
837 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
839 * sparc-opc.c: Set F_FBR on floating point branch instructions.
840 Set F_FLOAT on other floating point instructions.
842 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
844 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
846 (powerpc_opcodes): Add 860/821 specific SPRs.
848 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
850 * configure.in: Permit --enable-shared to specify a list of
851 directories. Set and substitute BFD_PICLIST.
852 * configure: Rebuild.
853 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
854 uses. Set to @BFD_PICLIST@.
856 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
858 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
859 not "abs", which may be needed for the absolute in something
860 like btst #0,@10:8. Print L_3 immediates separately from other
861 immediates. Change ABSMOV reference to ABS8MEM.
863 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
865 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
866 (current_arch_mask): New static global.
867 (compute_arch_mask): New static function.
868 (print_insn_sparc): Delete sparc_v9_p. New static local
869 current_mach. Resort opcode table if current_mach changes.
870 Generalize "insn not supported" test.
871 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
872 Delete test for v9/!v9.
873 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
875 (brfc): Split into CBR and FBR for coprocessor/fp branches.
876 (brfcx): Renamed to FBRX.
877 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
878 coprocessor mnemonics are not supported on the sparclet).
879 (condf): Renamed to CONDF.
880 (SLCBCC2): Delete F_ALIAS flag.
882 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
884 * sparc-opc.c (sparc_opcodes): rd must be 0 for
885 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
887 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
889 * Makefile.in (config.status): Depend upon BFD VERSION file, so
890 that the shared library version number is set correctly.
892 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
894 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
895 Miles Bader <miles@gnu.ai.mit.edu>.
896 * configure: Rebuild.
898 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
900 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
903 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
905 * configure: Rebuild with autoconf 2.8.
907 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
909 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
910 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
912 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
914 * configure.in: Don't set SHLIB or SHLINK to an empty string,
915 since they appear as targets in Makefile.in.
916 * configure: Rebuild.
918 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
920 * mpw-make.sed: Edit out shared library support bits.
922 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
924 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
925 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
926 (sparc_opcodes): Add sparclet insns.
927 (sparclet_cpreg_table): New static local.
928 (sparc_{encode,decode}_sparclet_cpreg): New functions.
929 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
931 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
933 * i386-dis.c (index16): New static variable.
934 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
936 (OP_indirE): Return result of OP_E.
937 (OP_E): Check for 16 bit addressing mode, and disassemble
938 correctly. Optimised 32 bit case a little. Don't print
939 "(base,index,scale)" when sib specifies only an offset.
941 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
943 * configure.in: Set and substitute SHLIB_DEP.
944 * configure: Rebuild.
945 * Makefile.in (SHLIB_DEP): New variable.
946 (LIBIBERTY_LISTS, BFD_LIST): New variables.
947 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
948 COMMON_SHLIB, add them to piclist with appropriate modifications.
949 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
950 here: just use piclist.
952 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
954 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
955 (print_insn_sparc): Rewrite v9/not-v9 tests.
956 (compare_opcodes): Likewise.
957 * sparc-opc.c (MASK_<ARCH>): Define.
958 (v6,v7,v8,sparclite,v9,v9a): Redefine.
959 (sparclet,v6notv9): Define.
960 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
961 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
963 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
965 * configure.in: Call AC_PROG_CC before configure.host.
966 * configure: Rebuild.
968 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
970 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
972 * i386-dis.c (onebyte_has_modrm): New static array.
973 (twobyte_has_modrm): New static array.
974 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
976 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
978 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
981 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
983 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
986 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
988 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
989 m68010up, not just m68020up | cpu32.
991 * Makefile.in (SONAME): New variable.
992 ($(SHLINK)): Make a link to the transformed name, as well.
993 (stamp-tshlink): New target.
994 (install): Skip stamp-tshlink during install.
996 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
998 * configure.in: Call AC_ARG_PROGRAM.
999 * configure: Rebuild.
1000 * Makefile.in (program_transform_name): New variable.
1001 (install): Transform library name before installing it.
1003 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1005 * i960-dis.c (mem): Add HX dcinva instruction.
1007 Support for building as a shared library, based on patches from
1008 Alan Modra <alan@spri.levels.unisa.edu.au>:
1009 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1010 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1011 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1012 * configure: Rebuild.
1013 * Makefile.in (ALLLIBS): New variable.
1014 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1015 (COMMON_SHLIB, SHLINK): New variables.
1016 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1017 (STAGESTUFF): Remove variable.
1018 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1019 (stamp-piclist, piclist): New targets.
1020 ($(SHLIB), $(SHLINK)): New targets.
1021 ($(OFILES)): Depend upon stamp-picdir.
1022 (disassemble.o): Build twice if PICFLAG is set.
1023 (MOSTLYCLEAN): Add pic/*.o.
1024 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1025 (distclean): Remove pic and stamp-picdir.
1026 (install): Install shared libraries.
1027 (stamp-picdir): New target.
1029 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1031 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1032 Print unknown instruction as "unknown", rather than in hex.
1034 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1036 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1038 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1040 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1042 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1044 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1045 when necessary. From Ulrich Drepper
1046 <drepper@myware.rz.uni-karlsruhe.de>.
1048 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1050 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1051 sparc_num_opcodes. Update architecture enum values.
1052 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1053 (sparc_opcode_lookup_arch): New function.
1054 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1055 (sparc_opcodes): Add v9a shutdown insn.
1057 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1059 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1060 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1062 (print_insn_sparc64): Deleted.
1063 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1066 * sparc-opc.c (architecture_pname): Add v9a.
1068 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1070 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1071 incorrectly defined as 0x16 when it should be 0x15.
1072 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1073 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1074 excb (exception barrier) which is defined in the Alpha
1075 Architecture Handbook version 2.
1076 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1077 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1078 disassembled as or, for example.
1080 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1082 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1083 (_print_insn_mips): Change i from int to unsigned int.
1085 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1087 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1088 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1090 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1092 * i386-dis.c: Added Pentium Pro instructions.
1094 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1096 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1099 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1101 * sh-opc.h (sh_nibble_type): Added REG_B.
1102 (sh_arg_type): Added A_REG_B.
1103 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1105 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1107 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1109 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1111 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1113 * Makefile.in (distclean): Remove stamp-h. From Ronald
1114 F. Guilmette <rfg@monkeys.com>.
1116 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1118 From David Mosberger-Tang <davidm@azstarnet.com>:
1119 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1122 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1124 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1125 (sh_table): Added many SH3 opcodes.
1126 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1128 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1130 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1131 (subco,subco.): Mark this PPC, not PPCCOM.
1133 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1135 * configure: Rebuild with autoconf 2.7.
1137 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1139 * configure: Rebuild with autoconf 2.6.
1141 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1143 * configure.in: Sort list of architectures. Accept but do nothing
1144 for alliant, convex, pyramid, romp, and tahoe.
1146 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1148 * a29k-dis.c (print_special): Change num to unsigned int.
1150 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1152 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1155 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1157 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1158 * configure: Rebuilt.
1160 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1162 * configure.in: Add case for bfd_i860_arch.
1163 * configure: Rebuild.
1165 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1167 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1168 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1169 (NEXTDOUBLE): Likewise.
1170 (print_insn_m68k): Don't match fmoveml if there is more than one
1171 register in the list.
1172 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1174 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1176 * m68k-opc.c: Use #W rather than #w.
1177 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1179 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1181 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1182 and likewise for all the dbxx opcodes.
1184 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1186 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1188 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1190 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1191 the VR4100 specific instructions to the mips_opcodes structure.
1193 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1195 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1196 ugly Metrowerks bug in CW6, is fixed in CW7.
1198 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1200 * ppc-opc.c (whole file): Add flags for common/any support.
1202 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1204 * Makefile.in (BISON): Remove macro.
1205 (FLAGS_TO_PASS): Remove BISON.
1207 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1209 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1211 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1212 instructions that take no args by looking at the match mask.
1213 (print_insn_arg): Always print "%" before register names.
1214 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1215 [case '_']: Don't print "@#" before address.
1216 [case 'J']: Use "%s" as format string, not register name.
1217 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1219 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1221 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1224 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1226 From David Mosberger-Tang <davidm@azstarnet.com>
1228 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1229 (alpha_insn_set): added definitions for VAX floating point
1230 instructions (Unix compilers don't generate these, but handcoded
1231 assembly might still use them).
1233 * alpha-dis.c (print_insn_alpha): added support for disassembling
1234 the miscellaneous instructions in the Alpha instruction set.
1236 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1238 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1239 no longer create sysdep.h, sed ppc-opc.c to work around a
1240 serious Metrowerks C bug.
1241 * mpw-make.in: Remove.
1242 * mpw-make.sed: New file, used by mpw-configure to edit
1243 Makefile.in into an MPW makefile.
1245 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1247 * Makefile.in (maintainer-clean): New synonym for realclean.
1249 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1251 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1252 which use '0', '1', and '2' instead. Specify the proper size for
1253 a pmove immediate operand. Correct the pmovefd patterns to be
1254 moves to a register, not from a register.
1255 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1257 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1259 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1260 %psr, %wim, %tbr as F_NOTV9.
1262 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1264 * Makefile.in (Makefile): Just rebuild Makefile when running
1266 (config.h, stamp-h): New targets.
1267 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1268 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1269 rebuilding config.h.
1270 * configure: Rebuild.
1272 * mips-opc.c: Change unaligned loads and stores with "t,A"
1273 operands to use "t,A(b)".
1275 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1277 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1279 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1281 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1282 until 3 instead of until 2.
1284 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1286 * Makefile.in (ALL_CFLAGS): Define.
1287 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1288 (MOSTLYCLEAN): Add config.log.
1289 (distclean): Don't remove config.log.
1290 * configure.in: Substitute HDEFINES.
1291 * configure: Rebuild.
1293 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1295 * sh-opc.h (sh_arg_type): Add F_FR0.
1296 (sh_table, case fmac): Add F_FR0 as first argument.
1298 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1300 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1302 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1304 * sparc-dis.c: Remove all references to NO_V9.
1306 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1308 * aclocal.m4: Just include ../bfd/aclocal.m4.
1309 * configure: Rebuild.
1311 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1313 * sparc-dis.c (X_DISP19): Define.
1314 (print_insn, case 'G'): Use it.
1315 (print_insn, case 'L'): Sign extend displacement.
1317 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1319 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1320 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1321 host_makefile_frag or frags.
1322 * aclocal.m4: New file.
1323 * configure: Rebuild.
1324 * Makefile.in (INSTALL): Set to @INSTALL@.
1325 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1326 (INSTALL_DATA): Set to @INSTALL_DATA@.
1328 (AR_FLAGS): Set to rc rather than qc.
1329 (CC): Define as @CC@.
1330 (CFLAGS): Set to @CFLAGS@.
1331 (@host_makefile_frag@): Remove.
1332 (config.status): Remove dependency upon @frags@.
1334 * configure.in: ../bfd/config.bfd now just sets shell variables.
1335 Use them rather than looking through target Makefile fragments.
1336 * configure: Rebuild.
1338 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1340 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1342 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1344 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1345 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1348 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1349 (lookup_{name,value}): New functions.
1350 (prefetch_table): New static local.
1351 (sparc_{encode,decode}_prefetch): New functions.
1352 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1354 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1356 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1359 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1361 * sh-dis.c: Correct comment on first line of file.
1363 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1365 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1367 * sparc-opc.c (asi, membar): New static locals.
1368 (sparc_{encode,decode}_{asi,membar}): New functions.
1369 (sparc_opcodes, membar insn): Fix.
1370 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1371 Support decoding of membar masks.
1374 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1376 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1378 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1380 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1381 and likewise for the other branches. Add bhs as an alias for bcc,
1382 and likewise for the size variants. Add dbhs as an alias for
1385 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1387 * sh-opc.h (FP sts instructions): Update to match reality.
1389 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1391 * m68k-dis.c: (fpcr_names): Add % before all register names.
1392 (reg_names): Likewise.
1393 (print_insn_arg): Don't explicitly print % before register names.
1394 Add % before register names in static array names. In case 'r',
1395 print data registers as `@(Dn)', not `Dn@'. When printing a
1396 memory address, don't print @# before it.
1397 (print_indexed): Change base_disp and outer_disp from int to
1398 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1399 syntax. Sign extend 8 byte displacement correctly.
1400 (print_base): Print using MIT syntax. Print zpc when appropriate.
1401 Change parameter disp from int to bfd_vma.
1403 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1406 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1408 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1409 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1410 * sh-opc.h (sh_arg_type): Add new operand types.
1411 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1413 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1415 * Makefile.in (distclean): Remove generated file config.h.
1417 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1419 * Makefile.in (distclean): Remove generated file config.h.
1421 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1423 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1425 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1427 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1428 rather than numopcodes. Use m68k_opcodes rather than removed
1429 opcode function. Don't check F_ALIAS.
1430 (print_insn_arg): Change first parameter to be const char *.
1431 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1432 (m68k-opc.o): New target.
1433 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1434 * configure: Rebuild.
1436 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1438 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1439 (opcode_bits, opcode_hash_table): New variables.
1440 (opcodes_initialized): Renamed from opcodes_sorted.
1441 (build_hash_table): New function.
1442 (is_delayed_branch): Use hash table.
1443 (print_insn): Renamed from print_insn_sparc, made static.
1444 Build and use hash table. If !sparc64, ignore sparc64 insns,
1445 and vice-versa if sparc64.
1446 (print_insn_sparc, print_insn_sparc64): New functions.
1447 (compare_opcodes): Move sparc64 opcodes to end.
1448 Print commutative insns with constant second.
1449 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1451 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1453 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1454 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1455 avoids printing a delay slot in a delay slot.
1456 * sh-opc.h (sh_table): Fully bracket last entry.
1458 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1460 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1462 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1464 * configure.in: Get host_makefile_frag from ${srcdir}.
1466 * configure.in: Autoconfiscated. Check for string[s].h. Create
1467 config.h from config.in. Don't set up sysdep.h link.
1468 * sysdep.h: New file.
1469 * configure, config.in: New files, generated from configure.in.
1470 * Makefile.in: Updated to be processed autoconf-style.
1471 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1472 (Makefile): Depend on config.status.
1473 (config.status): New rule.
1474 * configure.bat: Update Makefile substitutions.
1476 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1478 * mips-opc.c (L1): Define.
1479 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1480 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1483 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1485 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1486 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1487 have multiple add units but only a single logical unit.
1489 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1490 shifted by 18, without any insertion or extraction function.
1491 (insert_cr, extract_cr): Remove.
1494 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1496 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1499 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1501 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1504 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1506 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1507 * sh-opc.h: Add copyright.
1509 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1511 * Makefile.in (crunch-m68k): Delete extra target accidentally
1512 checked in a while ago.
1514 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1516 * sh-opc.h (sh_table): Add SH3 support.
1518 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1520 * sh-opc.h: Added bsrf and braf.
1522 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1524 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1525 bogus [ls]fm{ea,fd} patterns.
1527 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1528 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1529 initialize it from memory. Make function static.
1530 (print_insn_{big,little}_arm): New functions.
1531 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1532 the correct endianness.
1535 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1537 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1538 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1541 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1543 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1546 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1548 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1549 17th, so that it builds again using GCC as the compiler.
1551 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1553 * mips-dis.c (print_insn_little_mips): Cast return value from
1554 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1555 expects an unsigned long, and that might be fewer words of
1556 argument storage (e.g., if bfd_vma is long long on a 32-bit
1558 (print_insn_big_mips): Likewise with bfd_getb32 value.
1559 (_print_insn_mips): Now static.
1561 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1563 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1564 gcc memory hog problem with initializer is fixed.
1567 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1569 * arc-opc.c (NULL): Define.
1570 (arc_operands, insn fields u,s): Delete.
1571 (arc_operands, insn fields a,b,c): Mark as signed.
1572 (arc_opcodes): No longer const, links computed at run-time.
1573 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1574 suffixes that affect the insn code.
1575 (arc_opcodes): Resort table to macros are first.
1576 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1577 (arc_opcodes, st [b] entry): Likewise.
1578 (arc_opcodes, st [b,d] entry): Fix mask, value.
1579 (arc_reg_names): Add entries for r29, r30, r31, r60.
1580 (opcode_map, icode_map): New static globals.
1581 (arc_opcode_init_tables): Initialize them.
1582 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1583 (insert_shimmoffset): Signal error if register present.
1585 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1588 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1590 Merge in support for Mac MPW as a host.
1591 (Old change descriptions retained for informational value.)
1593 * mpw-config.in (archname): Compute from the config.
1594 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1596 * mpw-config.in (target_arch): Compute from canonical target.
1597 (m68k, mips, powerpc, sparc): Add architectures.
1598 * mpw-make.in (disassemble.c.o): Add.
1599 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1601 * mpw-config.in (BFD_MACHINES): Set to a default value.
1602 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1604 * mpw-make.in (CSEARCH): Add extra-include to search path.
1606 * mpw-config.in (varargs.h): Don't create.
1607 (sysdep.h): Create using forward-include.
1608 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1610 * mpw-config.in: New file, MPW version of configure.in.
1611 * mpw-make.in: New file, MPW version of Makefile.in.
1614 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1616 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1617 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1618 (print_insn_*): Pass bfd mach number, not opcode version.
1619 * arc-opc.c (arc_get_opcode_mach): New function.
1622 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1624 * alpha-dis.c (print_insn_alpha): Put empty statement after
1627 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1629 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1630 (low_sign_extend): Likewise.
1631 (get_field): Delete unused function.
1632 (set_field, deposit_14, deposit_21): Likewise.
1634 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1636 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1639 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1641 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1643 * alpha-opc.h (OSF_ASMCODE): define
1644 print pal-code names as defined in App C of the
1645 Alpha Architecture Reference Manual
1647 * alpha-dis.c: cleaned up output
1648 print stylized code forms as defined in App A.4.3 of the
1649 Alpha Architecture Reference Manual
1651 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1653 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1655 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1658 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1660 * m68k-dis.c (opcode): New function. Returns address of opcode
1661 table entry given index, even if the opcode table was split to
1662 work around gcc bugs.
1663 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1665 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1666 (reg_names): Now const.
1667 (print_insn_arg): Arrays cacheFieldName and names now const.
1668 (print_indexed): Array scales now const.
1671 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1673 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1674 (print_insn_arc_{host,graphics,audio}): Likewise.
1675 (print_insn): Add prototype.
1676 (arc_get_disassembler): New arg `big_p'. Return little or big
1677 print fn accordingly.
1678 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1679 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1680 (arc_opval_supported): Likewise.
1681 * disassemble.c (disassembler): Pass big endian flag to
1682 arc_get_disassembler.
1685 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1687 * ppc-opc.c: Sort recently added instructions by minor opcode
1688 number within major opcode number.
1690 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1692 * hppa-dis.c: Include libhppa.h.
1694 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1696 * mips-opc.c: Change dli to use M_DLI, and add dla.
1698 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1700 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1703 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1705 * arc-dis.c (arc_get_disassembler): Change argument to int,
1706 one of bfd_mach_arc_xxx. All callers updated.
1709 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1711 * mips-opc.c: Add r4650 mul instruction.
1713 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1715 * mips-opc.c: Add uld and usd macros for unaligned double load and
1718 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1720 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1721 mfdcr, mtdcr, icbt, iccci.
1724 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1726 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1727 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1728 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1729 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1730 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1731 (insert_absaddr): New function.
1733 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1735 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1736 New argument `cpu', pass it to arc_opcode_init_tables.
1737 Document byte order dependencies. Ignore unsupported insns.
1738 (arc_get_disassembler): New function.
1739 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1740 print_insn_arc_audio): New functions.
1741 * arc-opc.c (MULTSHIFT operand): Delete.
1742 (UNSIGNED, SATURATION): New operands.
1743 (mac, mul, mul64, mulu64): New insns.
1744 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1745 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1746 (host,graphics,audio extended and auxiliary regs): Define.
1747 (ss, sc, mh, ml): New suffixes.
1748 (arc_opcode_supported, arc_opval_supported): New functions.
1749 (insert_multshift, extract_multshift): Deleted.
1750 * disassemble.c (disassembler, case bfd_arch_arc): Call
1751 arc_get_disassembler to get disassembler routine.
1754 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1756 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1757 signed char fields to shorts, more portable.
1759 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1761 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1762 char fields as signed chars, since they may have negative values.
1764 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1766 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1767 (mycroft@netbsd.org).
1769 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1771 From "Logg, Ed" <elogg@ea.com>:
1772 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1773 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1776 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1778 * ppc-opc.c: Changes based on patch from David Edelsohn
1779 <edelsohn@mhpcc.edu>.
1780 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1783 (insert_tbr): New static function.
1784 (extract_tbr): New static function.
1785 (XFXFXM_MASK, XFXM): Define.
1786 (XSPRBAT_MASK, XSPRG_MASK): Define.
1787 (powerpc_opcodes): Add instructions to access special registers by
1788 name. Add mtcr and mftbu.
1790 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1792 * mips-opc.c (P3): Define.
1793 (mips_opcodes): Add mad and madu.
1795 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1797 * configure.in: Add W65 support.
1798 * disassemble.c: Likewise.
1799 * w65-opc.h, w65-dis.c: New files.
1801 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1803 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1807 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1809 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1811 * arc-opc.c (extract_reladdr): New function.
1812 (insert_reladdr): Store address right-shifted by 2.
1815 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1817 * mips-opc.c: Add dli as a synonym for li.
1820 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1822 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1824 (extraction fns): Insn argument now array of two words. Return pointer
1825 to value's table entry. All uses changed.
1826 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1827 (insert_multshift, extract_multshift): New fns.
1828 (arc_operands): Add support for cache bypass suffix. Add support for
1829 predefined aux regs. Modifier bits moved to flags field.
1830 (arc_opcodes): Likewise.
1831 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1832 New insn rlc. Update to syntax in programmer's manual.
1833 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1834 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1836 (arc_opcode_init_tables): New argument to indicate cpu type.
1837 (insert_reg): Handle predefined aux regs.
1838 (extract_reg): Likewise.
1839 (lookup_register): New fn.
1840 * arc-dis.c (arc_condition_codes): Deleted.
1841 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1842 Clean up modifier handling. Handle predefined aux regs.
1845 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1847 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1848 print something for reserved opcode values, even if it won't
1851 * mips-dis.c (_print_insn_mips): When initializing, shift right
1852 and mask, to avoid sign extension problems on the Alpha.
1854 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1858 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1860 * configure.in: Add ARC support.
1861 * disassemble.c: Likewise.
1862 * arc-dis.c, arc-opc.c: New files.
1865 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1867 * sh-opc.h (mov.l gbr): Get direction right.
1868 * sh-dis.c (print_insn_shx): New function.
1869 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1870 print opcodes with right byte order.
1872 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1874 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1875 to avoid conflicts with getopt.
1877 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1879 * hppa-dis.c (print_insn_hppa): Read the instruction using
1880 bfd_getb32, so that it works on a little endian or 64 bit host.
1881 Remove unused local variable op.
1883 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1885 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1886 addu does not work correctly if -mips3.
1888 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1890 * a29k-dis.c (print_special): Add special register names defined
1891 on 29030, 29040 and 29050.
1892 (print_insn): Handle new operand type 'I'.
1894 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1896 * Makefile.in (INSTALL): Use top level install.sh script.
1898 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1900 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1901 that it works on a little endian host.
1903 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1905 * configure.in: Use ${config_shell} when running config.bfd.
1907 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1909 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1911 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1913 * a29k-dis.c (print_insn): Print the opcode.
1915 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1917 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1919 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1921 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1923 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1925 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1926 which store a value into memory.
1928 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1930 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1931 * arm-dis.c, arm-opc.h: New files.
1933 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1935 * Makefile.in (ns32k-dis.o): Add dependency.
1936 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1937 string, not as array of chars.
1939 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1941 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1943 * sparc-opc.c: Added sparclite extended FP operations, and
1944 versions of v9 impdep* instructions permitting specification of
1947 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1949 * i960-dis.c (reg_names): Now const.
1950 (struct sparse_tabent): New type, copied from array type in mem
1952 (ctrl): Local static array ctrl_tab now const.
1953 (cobr): Local static array cobr_tab now const.
1954 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1955 static variable mem_tab no longer explicitly initialized. Changed
1956 mem_init to const array of struct sparse_tabent.
1957 (reg): Local static variable reg_tab no longer explicitly
1958 initialized. Changed reg_init to const array of struct
1960 (ea): Local static array scale_tab now const.
1962 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1965 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1967 * configure.bat: the disassember needs to be enabled for
1968 "objdump -d" to work in djgpp.
1970 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1972 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1973 (invalid_float): Enabled general version, doesn't require running
1974 on ns32k host. Changed to take char* argument, and test for
1975 explicitly specified sizes, instead of using sizeof() on host CPU
1977 (INVALID_FLOAT): Cast first argument.
1978 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1979 list_P032, list_M032): Now const.
1980 (optlist, list_search): Made appropriate arguments now point to
1982 (print_insn_arg): Changed static array of one-character-string
1983 pointers into a static const array of characters; fixed sprintf
1984 statement accordingly.
1986 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1988 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1989 from distribution. A ns32k-dis.c from a previous distribution has
1990 been brought up to date and supports the new interface.
1992 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1994 * configure.in: add bfd_ns32k_arch target support.
1996 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1997 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1999 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2001 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2004 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2006 * h8300-dis.c, mips-dis.c: Don't use true and false.
2008 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2010 * configure.in: Change --with-targets to --enable-targets.
2012 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2014 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2015 opcodes to the first instruction with that opcode, to speed
2016 disassembly of large files. From ralphc@pyramid.com (Ralph
2019 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2021 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2023 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2025 * configure.bat: update to latest makefile.in
2027 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2029 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2030 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2031 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2032 slot insn is in a delay slot.
2033 * z8k-opc.h: (resflg): Fix patterns.
2034 * h8500-opc.h Fix CR insn patterns.
2036 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2038 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2039 "cmpl" before POWER versions, so that gas -many uses them.
2041 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2043 * disassemble.c: New file.
2044 * Makefile.in (OFILES): Add disassemble.o.
2045 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2046 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2047 binutils/configure.in.
2049 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2050 opcode being examined.
2052 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2054 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2055 (insert_ral, insert_ram, insert_ras): New functions.
2056 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2057 RAS for store with update.
2059 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2061 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2062 (edelsohn@npac.syr.edu).
2064 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2066 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2069 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2071 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2073 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2075 * ppc-opc.c (powerpc_operands): The signedp field has been
2076 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2077 instead. Add new operand SISIGNOPT.
2078 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2079 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2080 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2083 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2085 * i386-dis.c (struct private): Renamed to dis_private. `private'
2086 is a reserved word for dynix cc.
2088 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2090 * configure.in: Change error message to refer to bfd/config.bfd
2091 rather than bfd/configure.in.
2093 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2095 * ppc-opc.c: Define POWER2 as short alias flag.
2096 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2099 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2101 * i960-dis.c (print_insn_i960): Don't read a second word for
2102 opcodes 0, 1, 2 and 3.
2104 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2106 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2108 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2110 * m68881-ext.c: Removed; no longer used.
2111 * Makefile.in: Changed accordingly.
2113 * m68k-dis.c (ext_format_68881): Don't declare.
2114 (print_insn_m68k): If an instruction uses place 'i', it uses at
2115 least four fixed bytes.
2116 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2117 extended float, convert to double using floatformat_to_double, not
2118 ieee_extended_to_double, and fetch the data before converting it.
2120 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2122 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2123 davidj@ICSI.Berkeley.EDU (David Johnson).
2125 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2127 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2128 PowerPC uses bdnz[l][a].
2130 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2132 * dis-buf.c, i386-dis.c: Include sysdep.h.
2134 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2136 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2138 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2139 by Motorola PowerPC 601 with PPC_OPCODE_601.
2140 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2141 Disassemble Motorola PowerPC 601 instructions as well as normal
2142 PowerPC instructions.
2144 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2146 * i960-dis.c (reg, mem): Just use a static array instead of
2149 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2151 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2152 condition name index if this is for a negated condition.
2154 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2155 Floating point format for 'H' operand is backwards from normal
2156 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2157 operands (fmpyadd and fmpysub), handle bizarre register
2158 translation correctly for single precision format.
2160 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2161 or 'I' operands if the next format specifier is 'M' (fcmp
2162 condition completer).
2164 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2166 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2167 single number giving a bitmask for the MB and ME fields of an M
2168 form instruction. Change NB to accept 32, and turn it into 0;
2169 also turn 0 into 32 when disassembling. Seperated SH from NB.
2170 (insert_mbe, extract_mbe): New functions.
2171 (insert_nb, extract_nb): New functions.
2172 (SC_MASK): Mask out SA and LK bits.
2173 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2174 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2175 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2176 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2177 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2178 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2179 (powerpc_macros): Define table of macro definitions.
2180 (powerpc_num_macros): Define.
2182 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2183 if PPC_OPERAND_NEXT is set.
2185 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2187 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2188 char. Retrieve contents using bfd_getl32 instead of shifting.
2190 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2192 * ppc-opc.c: New file. Opcode table for PowerPC, including
2193 opcodes for POWER (RS/6000).
2194 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2195 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2196 (CFILES): Add ppc-dis.c.
2197 (ppc-dis.o, ppc-opc.o): New targets.
2198 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2200 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2202 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2203 No space before 'u', 'f', or 'N'.
2205 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2207 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2208 farther than we should.
2210 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2212 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2214 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2216 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2218 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2219 needs it, to prevent reading past the end of a section.
2221 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2223 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2224 Removed t,A case for la; always use t,A(b) case.
2226 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2228 From Ted Lemen <mellon@pepper.ncd.com>
2229 * mips-dis.c (print_insn_arg): Handle 'k'.
2230 * mips-opc.c: Make cache use k, not t.
2232 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2234 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2235 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2236 FLOAT_FORMAT_CODE to put out floating point register names.
2238 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2240 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2242 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2244 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2246 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2248 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2249 larger than 32. Moved dsxx32 variants first for disassembler.
2251 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2253 * z8kgen.c, z8k-opc.h: Add full lda information.
2255 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2257 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2258 movb instructions. Any necessary space will be emitted by
2259 the code to handle nullification completers.
2261 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2263 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2265 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2267 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2268 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2270 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2272 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2274 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2276 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2277 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2279 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2281 * m88k-dis.c (m88kdis): comment change. Remove space after
2283 (printop): handle new arg types DEC and XREG for m88110.
2285 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2287 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2288 type for absolute branch addresses. Delete special
2289 "ble" and "be" code in 'W' operand code.
2291 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2293 * mips-opc.c: Set hazard information correctly for branch
2294 likely instructions.
2296 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2298 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2299 info->fprintf_func for printing and info->print_address_func for
2302 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2304 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2306 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2308 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2309 Corrected second case of "b" for disassembler.
2311 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2313 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2314 to BFD swapping routines to correspond to BFD name changes.
2316 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2318 * mips-opc.c: Change div machine instruction to be z,s,t rather
2319 than s,t. Change div macro to be d,v,t rather than d,s,t.
2320 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2321 rem and remu which generates only the corresponding div
2322 instruction. This is for compatibility with the MIPS assembler,
2323 which only generates the simple machine instruction when an
2324 explicit destination of $0 is used.
2325 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2327 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2329 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2330 WR_31 hazard for bal, bgezal, bltzal.
2332 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2334 * hppa-dis.c (print_insn_hppa): Use print function
2335 from within the disassemble_info, not fprintf_filtered.
2337 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2339 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2340 Law, law@cs.utah.edu.)
2342 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2344 * mips-opc.c ("absu"): Removed.
2347 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2349 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2350 Changed hazard information to distinguish between memory load
2351 delays and coprocessor load delays.
2353 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2355 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2357 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2359 * configure.in: Don't pass cpu to config.bfd.
2361 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2363 * m88k-dis.c (m88kdis): Make class unsigned.
2365 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2367 * alpha-dis.c (print_insn_alpha): One branch format case was
2368 missing the instruction name.
2370 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2372 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2373 Add the arch-specific auxiliary files.
2374 (OFILES): Remove the arch-specific auxiliary files
2375 and use BFD_MACHINES instead of DIS_LIBS.
2376 * configure.in: Set BFD_MACHINES based on --with-targets option.
2378 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2380 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2383 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2385 * sparc-opc.c: Change CONST to const to deal with gcc
2386 -Dconst=__const -traditional.
2388 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2390 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2391 coprocessor instructions out of #if 0, and made them use new
2394 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2396 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2398 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2400 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2401 instruction, for use by the disassembler.
2403 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2404 hand-coded sign extensions that depended on 32-bit host ints.
2405 FIXME, we still depend on big-endian host bitfield ordering.
2406 (sparc_print_insn): Set the insn_info_valid field, and the
2407 other fields that describe the instruction being printed.
2409 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2411 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2412 `jmp' instead of just one of them.
2414 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2416 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2417 (fput_fp_reg_r): Renamed from fput_reg_r.
2418 (fput_fp_reg): New function.
2419 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2421 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2423 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2425 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2427 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2429 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2430 don't output a space.
2432 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2434 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2436 * mips-opc.c: New file, containing opcode table from
2437 ../include/opcode/mips.h.
2438 * Makefile.in: Add it.
2440 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2442 * m88k-dis.c: New file, moved in from gdb and changed to use the
2443 new dis-asm.h disassembler interface.
2444 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2445 (m88k-dis.o): New target.
2447 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2449 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2450 argument string const char * to correspond to opcode/mips.h.
2452 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2454 * mips-dis.c: Updated to account for name changes in new version
2456 * Makefile.in: Added header file dependencies.
2458 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2460 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2462 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2464 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2465 extend, rather than shifts.
2467 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2469 * Makefile.in: Undo 15 June change.
2471 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2473 * m68k-dis.c (print_insn_arg): Change return value to byte count
2475 * m68k-dis.c: Re-write to detect invalid operands before
2476 printing anything, so we can handle this the same way we
2477 handle invalid opcodes.
2479 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2481 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2483 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2485 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2488 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2490 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2492 * configure.in: Do make sysdep.h link.
2493 * Makefile.in: Search ../include. Don't search ../bfd.
2495 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2497 Changes from Jeff Law, law@cs.utah.edu:
2498 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2499 Do not print a space before the completers specified by
2502 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2504 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2505 defined, since gdb has been fixed.
2507 Changes from Jeff Law, law@cs.utah.edu:
2508 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2509 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2510 be a *disassemble_info, not a *FILE.
2511 * hppa-dis.c: Support 'd', '!', and 'a'.
2512 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2513 * hppa-dis.c: Delete cases which are no longer needed.
2515 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2517 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2519 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2521 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2524 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2526 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2527 * configure.in: No longer need to configure to get sysdep.h.
2529 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2531 * Patches from Jeffrey Law <law@cs.utah.edu>.
2532 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2533 templates for 1.1 FP computational instructions.
2535 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2537 * h8500-dis.c (print_insn_h8500): Address argument is type
2539 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2542 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2543 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2545 * sparc-dis.c (compare_opcodes): Move static declaration to
2548 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2550 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2551 instruction, remove unimp hack from 'l' argument.
2553 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2555 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2558 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2560 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2561 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2564 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2566 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2567 arrays of string pointers to 2-d arrays of chars, to save
2570 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2572 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2573 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2575 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2577 * hppa-dis.c: New file from Utah, adapted to new disassembler
2579 * Makefile.in: Include it.
2581 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2583 * sh-dis.c, sh-opc.h: New files.
2585 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2587 * alpha-dis.c, alpha-opc.h: New files.
2589 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2591 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2594 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2596 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2598 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2600 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2603 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2605 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2606 and double percent signs a few places.
2608 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2610 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2611 Use info->print_address_func not print_address.
2613 * dis-buf.c (generic_print_address): New function.
2615 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2617 * Makefile.in: Add sparc-dis.c.
2618 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2620 Add `add' instruction to the set that get checked
2621 for a preceding `sethi' in order to print an absolute address.
2622 * (print_insn): Disassembly prefers real instructions.
2623 (is_delayed_branch): Speed up.
2624 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2625 Still missing some float ops, and needs testing.
2626 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2627 F_ALIAS. Use printf, not fprintf, when not passing a file
2629 (compare_opcodes): Check that identical instructions have
2630 identical opcodes, complain otherwise.
2633 * Include reg_names.
2635 Use dis-asm.h/read_memory_func interface.
2637 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2639 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2640 deliberately return non-zero to setjmp from longjmp. Otherwise
2641 this code fails to compile.
2643 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2645 * m68k-dis.c: Fix prototype for fetch_arg().
2647 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2649 * dis-buf.c: New file, for new read_memory_func interface.
2650 Makefile.in (OFILES): Include it.
2651 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2652 Use new read_memory_func interface.
2654 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2656 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2657 * h8500-opc.h: Fix couple of opcodes.
2659 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2661 * Makefile.in: add dvi & installcheck targets
2663 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2665 * Makefile.in: Update for h8500-dis.c.
2667 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2669 * h8500-dis.c, h8500-opc.h: New files
2671 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2673 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2674 ../include/dis-asm.h.
2675 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2676 and ../gdb/m68k-pinsn.c).
2677 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2678 and ../gdb/i386-pinsn.c).
2679 * m68881-ext.c: New file. Moved definition of
2680 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2681 * Makefile.in: Adjust for new files.
2682 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2683 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2684 can be dis-assembled.
2686 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2688 * mips-dis.c (print_insn_arg): Now returns void.
2690 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2692 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2693 files that use the macros.
2695 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2697 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2698 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2699 (CFILES): Added mips-dis.c.
2701 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2703 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2704 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2706 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2708 * Makefile.in: Improve *clean rules.
2709 * configure.in: Allow a default host.
2711 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2713 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2714 files include other sysdep files
2716 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2718 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2720 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2722 * configure.in: For host support, use ../bfd/configure.host
2723 so it stays in sync with the ../bfd/hosts database.
2725 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2727 * configure.in: use cpu-vendor-os triple instead of nested cases
2729 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2731 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2732 *always* the wrong one.
2734 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2736 * z8kgen.c: added copyright info
2738 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2740 * z8k-dis.c (unparse_instr): prettier tabs
2741 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2743 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2745 * configure.in: Add ncr* configuration.
2746 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2747 picayune ANSI compilers happy.
2749 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2751 * configure.in (i386): Make i386 and i486 synonymous for now.
2752 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2754 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2756 * Makefile.in (install): Fix typo.
2758 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2760 * Makefile.in (make): Remove obsolete crud.
2761 (sparc-opc.o): Avoid Sun Make VPATH bug.
2763 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2765 * Makefile.in: since there are no SUBDIRS, remove rule and
2766 references of subdir_do.
2768 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2770 * Makefile.in (install): Get the library name right here too.
2771 Don't install bfd.h, since it's unrelated to this library. No
2772 subdirs to recurse into, either.
2773 (CFILES): The source file has a .c suffix, not .o.
2775 * sparc-opc.c: New file, moved from BFD.
2776 * Makefile.in (OFILES): Build it.
2778 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2780 * z8k-dis.c: fixed forward refferences of some declarations.
2782 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2784 * Makefile.in: get the name of the library right
2786 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2788 * z8k-dis.c: knows how to disassemble z8k stuff
2789 * z8k-opc.h: new file full of z8000 opcodes
2793 version-control: never