1 2002-05-17 Alan Modra <amodra@bigpond.net.au>
3 * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
4 * configure.in: Invoke AM_INSTALL_LIBBFD.
5 * Makefile.am (install-data-local): Move to..
6 (install_libopcodes): .. New target.
7 (uninstall_libopcodes): Likewise.
8 (install-bfdlibLTLIBRARIES): Likewise.
9 (uninstall-bfdlibLTLIBRARIES): Likewise.
12 (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
13 * aclocal.m4: Regenerate.
14 * configure: Regenerate.
15 * Makefile.in: Regenerate.
17 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
19 * fr30-asm.c: Regenerate.
20 * fr30-desc.c: Regenerate.
21 * fr30-dis.c: Regenerate.
22 * m32r-asm.c: Regenerate.
23 * m32r-desc.c: Regenerate.
24 * m32r-dis.c: Regenerate.
25 * openrisc-asm.c: Regenerate.
26 * openrisc-desc.c: Regenerate.
27 * openrisc-dis.c: Regenerate.
28 * xstormy16-asm.c: Regenerate.
29 * xstormy16-desc.c: Regenerate.
30 * xstormy16-dis.c: Regenerate.
32 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
34 * mips-dis.c (is_newabi): EABI is not a NewABI.
36 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
38 * configure.in (shle-*-*elf*): Include sh64 support.
39 * configure: Regenerate.
41 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
43 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
44 (print_insn_mode): Print some basic info about floating point values.
46 2002-05-09 Anton Blanchard <anton@samba.org>
48 * ppc-opc.c: Add "tlbiel" for POWER4.
50 2002-05-07 Graydon Hoare <graydon@redhat.com>
52 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
53 than just most-recently-opened.
55 2002-05-01 Alan Modra <amodra@bigpond.net.au>
57 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
59 2002-04-24 Christian Groessler <chris@groessler.org>
61 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
62 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
64 (z8k_lookup_instr): CLASS_IGNORE case added.
65 (output_instr): Don't print hex codes, they are already
67 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
68 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
69 (unparse_instr): Fix base and indexed addressing disassembly:
70 The index is inside the brackets.
71 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
72 (opt): Fix shift left/right arithmetic/logical byte defines:
73 The high byte of the immediate word is ignored by the
75 Fix n parameter of ldm opcodes: The opcode contains (n-1).
76 (args): Fix "n" entry.
77 (toks): Add "nim4" and "iiii" entries.
78 * z8k-opc.h: Regenerated with new z8kgen.c.
80 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
82 * po/id.po: New Indonesian translation.
83 * configure.in (ALL_LIGUAS): Add id.po
84 * configure: Regenerate.
86 2002-04-17 matthew green <mrg@redhat.com>
88 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
90 2002-04-04 Alan Modra <amodra@bigpond.net.au>
92 * dep-in.sed: Cope with absolute paths.
93 * Makefile.am (dep.sed): Subst TOPDIR.
95 * Makefile.in: Regenerate.
96 * ppc-opc.c: Whitespace.
97 * s390-dis.c: Fix copyright date.
99 2002-03-23 matthew green <mrg@redhat.com>
101 * ppc-opc.c (vmaddfp): Fix operand order.
103 2002-03-21 Alan Modra <amodra@bigpond.net.au>
105 * Makefile.am: Run "make dep-am".
106 * Makefile.in: Regenerate.
108 2002-03-21 Anton Blanchard <anton@samba.org>
110 * ppc-opc.c: Add optional field to mtmsrd.
111 (MTMSRD_L, XRLARB_MASK): Define.
113 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
115 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
117 (print_insn) Likewise.
118 (putop): Fix handling of 'E'
119 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
122 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
124 * po/fr.po: Updated version.
126 2002-03-16 Chris Demetriou <cgd@broadcom.com>
128 * mips-opc.c (M3D): Tweak comment.
129 (mips_builtin_op): Add comment indicating that opcodes of the
130 same name must be placed together in the table, and sort
131 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
132 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
134 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
136 * Makefile.am: Tidy up sh64 rules.
137 * Makefile.in: Regenerate.
139 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
141 * mips-dis.c: Update copyright years.
143 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
145 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
146 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
147 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
148 indicate that they should dissassemble all applicable
150 * mips-opc.c: Add support for MIPS-3D instructions.
151 (M3D): New definition.
153 * mips-opc.c: Update copyright years.
155 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
157 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
159 2002-03-15 Chris Demetriou <cgd@broadcom.com>
161 * mips-dis.c (is_newabi): Fix ABI decoding.
163 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
165 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
166 and bfd_mach_mipsisa64 cases to match the rest.
168 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
170 * po/fr.po: Updated version.
172 2002-03-13 Alan Modra <amodra@bigpond.net.au>
174 * ppc-opc.c: Add optional `L' field to tlbie.
175 (XRTLRA_MASK): Define.
177 2002-03-06 Chris Demetriou <cgd@broadcom.com>
179 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
182 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
184 2002-03-05 Paul Koning <pkoning@equallogic.com>
186 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
187 for float opcodes that take float operands. Add alternate
188 names (xxxD vs. xxxF) for float opcodes.
189 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
190 (print_foperand): New function to handle float opcode operands.
191 (print_insn_pdp11): Use print_foperand to disassemble float ops.
193 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
197 2002-02-26 Brian Gaeke <brg@dgate.org>
199 * Makefile.am (install-data-local): Install dis-asm.h.
201 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
203 * configure.in (LINGUAS): Add de.po.
204 * configure: Regenerate.
205 * po/de.po: New file.
207 2002-02-25 Alan Modra <amodra@bigpond.net.au>
209 * ppc-dis.c (powerpc_dialect): Handle power4 option.
210 * ppc-opc.c (insert_bdm): Correct description of "at" branch
211 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
212 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
213 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
214 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
215 (PPCCOM32, PPCCOM64): Delete.
216 (NOPOWER4, POWER4): Define.
217 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
218 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
219 are enabled for power4 rather than ppc64.
221 2002-02-20 Tom Rix <trix@redhat.com>
223 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
225 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
227 * s390-dis.c (init_disasm): Use renamed architecture defines.
229 2002-02-19 matthew green <mrg@redhat.com>
231 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
234 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
236 * po/tr.po: Updated translation.
238 2002-02-15 Richard Henderson <rth@redhat.com>
240 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
243 2002-02-15 Richard Henderson <rth@redhat.com>
245 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
248 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
250 * po/da.po: Updated translation.
252 2002-02-12 Graydon Hoare <graydon@redhat.com>
254 * cgen-asm.in (parse_insn_normal): Change call from
255 @arch@_cgen_parse_operand to cd->parse_operand, to
256 facilitate CGEN_ASM_INIT_HOOK doing useful work.
258 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
260 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
263 2002-02-11 Alan Modra <amodra@bigpond.net.au>
265 * Makefile.am: "make dep-am".
266 * Makefile.in: Regenerate.
267 * aclocal.m4: Regenerate.
268 * config.in: Regenerate.
269 * configure: Regenerate.
271 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
273 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
274 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
276 * configure: Regenerate.
278 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
280 * cgen-dis.c: Add prototypes for count_decodable_bits
281 and add_insn_to_hash_chain.
283 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
285 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
286 * configure: Rebuilt.
288 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
290 * or32-opc.c: Fix compile time warning messages.
291 * or32-dis.c: Fix compile time warning messages.
293 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
296 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
297 * sh64-opc.c: Regenerate.
298 2001-03-13 DJ Delorie <dj@redhat.com>
299 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
300 purpose is more obvious.
301 * sh64-opc.c (shmedia_table): Ditto.
302 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
303 (print_insn_shmedia): Ditto.
304 2001-03-12 DJ Delorie <dj@redhat.com>
305 * sh64-opc.c: Adjust comments to reflect reality: replace bits
306 3:0 with zeros (not "reserved"), replace "rrrrrr" with
307 "gggggg" for two-operand floating point opcodes. Remove
309 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
310 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
311 Correct printing of .byte:s. Return number of printed bytes or
313 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
314 to next four-byte-alignment if insn or data is not aligned.
315 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
316 * sh64-dis.c: Update comments and fix comment formatting.
317 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
318 Abort instead of setting length to 0.
319 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
320 crange_bsearch_cmpl, sh64_get_contents_type,
321 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
322 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
323 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
324 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
325 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
326 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
327 address with same prefix as SHcompact.
328 In the disassembler, use a .cranges section for linked executables.
329 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
330 and update for using structure in info->private_data.
331 (struct sh64_disassemble_info): New.
332 (is_shmedia_p): Delete.
333 (crange_qsort_cmpb): New function.
334 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
335 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
336 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
337 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
338 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
339 pair. Display addresses for linked executables only.
340 (print_insn_sh64x_media): Initialize info->private_data by calling
341 init_sh64_disasm_info.
342 (print_insn_sh64x): Ditto. Find out type of contents by calling
343 sh64_contents_type_disasm. Display data regions using ".long" and
344 ".byte" similar to unrecognized opcodes.
345 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
346 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
347 information in section flags before considering symbols. Don't
348 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
349 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
350 matching $target $canon_targets instead of looking at the
351 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
352 * configure: Regenerate.
353 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
354 * sh64-opc.c (shmedia_creg_table): New.
355 * sh64-opc.h (shmedia_creg_info): New type.
356 (shmedia_creg_table): Declare.
357 * sh64-dis.c (creg_name): New function.
358 (print_insn_shmedia): Use it.
359 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
360 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
361 print_insn_sh64l if little-endian.
362 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
363 (print_insn_sh64l): New.
364 (print_insn_sh64x): New.
365 (print_insn_sh64x_media): New.
366 (print_insn_sh64): Break out code to print_insn_sh64x and
367 print_insn_sh64x_media.
368 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
369 * sh64-opc.h: New file
370 * sh64-opc.c: New file
371 * sh64-dis.c: New file
372 * Makefile.am: Add sh64 targets.
373 (HFILES): Add sh64-opc.h.
374 (CFILES): Add sh64-opc.c and sh64-dis.c.
375 (ALL_MACHINES): Add sh64 files.
376 * Makefile.in: Regenerate.
377 * configure.in: Add support for sh64 to bfd_sh_arch.
378 * configure: Regenerate.
379 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
380 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
382 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
383 * po/POTFILES.in: Regenerate.
384 * po/opcodes.pot: Regenerate.
386 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
388 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
390 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
392 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
394 2002-02-01 Alan Modra <amodra@bigpond.net.au>
396 * Makefile.am: Run "make dep-am"
397 * Makefile.in: Regenerate.
399 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
401 * or32-dis.c: New file.
402 * or32-opc.c: New file.
403 * configure.in: Add support for or32.
404 * configure: Regenerate.
405 * Makefile.am: Add support for or32.
406 * Makefile.in: Regenerate.
407 * disassemble.c: Add support for or32.
408 * po/POTFILES.in: Regenerate.
409 * po/opcodes.pot: Regenerate.
411 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
413 * configure: Regenerated.
415 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
417 * po/fr.po: Updated version.
419 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
421 * po/es.po: Updated version.
423 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
425 * po/da.po: New version.
427 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
429 * po/da.po: New file: Spanish translation.
430 * configure.in (ALL_LINGUAS): Add da.
431 * configure: Regenerate.
433 2002-01-22 Graydon Hoare <graydon@redhat.com>
435 * fr30-asm.c: Regenerate.
436 * fr30-desc.c: Likewise.
437 * fr30-desc.h: Likewise.
438 * fr30-dis.c: Likewise.
439 * fr30-ibld.c: Likewise.
440 * fr30-opc.c: Likewise.
441 * fr30-opc.h: Likewise.
442 * m32r-asm.c: Likewise.
443 * m32r-desc.c: Likewise.
444 * m32r-desc.h: Likewise.
445 * m32r-dis.c: Likewise.
446 * m32r-ibld.c: Likewise.
447 * m32r-opc.c: Likewise.
448 * m32r-opc.h: Likewise.
449 * m32r-opinst.c: Likewise.
450 * openrisc-asm.c: Likewise.
451 * openrisc-desc.c: Likewise.
452 * openrisc-desc.h: Likewise.
453 * openrisc-dis.c: Likewise.
454 * openrisc-ibld.c: Likewise.
455 * openrisc-opc.c: Likewise.
456 * openrisc-opc.h: Likewise.
457 * xstormy16-desc.c: Likewise.
459 2002-01-22 Richard Henderson <rth@redhat.com>
461 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
464 2002-01-22 Alan Modra <amodra@bigpond.net.au>
466 * Makefile.am: Run "make dep-am".
467 * Makefile.in: Regenerate.
468 * opcodes/po/POTFILES.in: Regenerate.
470 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
472 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
473 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
475 2002-01-18 Keith Walker <keith.walker@arm.com>
477 * arm-opc.h (arm_opcodes): Add bxj instruction.
479 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
481 * po/opcodes.pot: Regenerate.
482 * po/fr.po: Regenerate.
483 * po/sv.po: Regenerate.
484 * po/tr.po: Regenerate.
486 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
488 * po/tr.po: Import new version.
490 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
492 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
493 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
496 2002-01-10 matthew green <mrg@redhat.com>
498 * xstormy16-asm.c: Regenerate.
499 * xstormy16-desc.c: Likewise.
500 * xstormy16-desc.h: Likewise.
501 * xstormy16-dis.c: Likewise.
502 * xstormy16-opc.c: Likewise.
503 * xstormy16-opc.h: Likewise.
505 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
507 * po/es.po: New file: Spanish translation.
508 * configure.in (ALL_LINGUAS): Add es.
509 * configure: Regenerate.
511 2001-12-31 Jeffrey A Law (law@redhat.com)
513 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
514 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
515 Always emit a space after 'H'.
517 2001-12-18 matthew green <mrg@redhat.com>
519 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
521 2001-12-17 Richard Henderson <rth@redhat.com>
523 * alpha-opc.c (unop): Encode with RB as $sp.
525 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
527 * Makefile.am: Add support for xstormy16.
528 * Makefile.in: Regenerate.
529 * configure.in: Add support for xstormy16.
530 * configure: Regenerate.
531 * disassemble.c: Add support for xstormy16.
532 * xstormy16-asm.c: New generated file.
533 * xstormy16-desc.c: New generated file.
534 * xstormy16-desc.h: New generated file.
535 * xstormy16-dis.c: New generated file.
536 * xstormy16-ibld.c: New generated file.
537 * xstormy16-opc.c: New generated file.
538 * xstormy16-opc.h: New generated file.
540 2001-12-06 Richard Henderson <rth@redhat.com>
542 * alpha-opc.c (alpha_opcodes): Add wh64en.
544 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
546 * d10v-opc.c (d10v_predefined_registers): Remove warnings
547 introduced in Nov 29's patch.
549 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
552 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
555 * d10v-opc.c (RSRC_NOSP): New macro.
556 (d10v_operands): Add it.
557 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
559 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
561 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
562 (RSRC_SP): New macro.
563 (d10v_operands): Add it.
564 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
566 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
568 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
569 Also, break out of the loop as soon as an instruction has been
572 2001-11-17 matthew green <mrg@redhat.com>
574 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
576 2001-11-15 Alan Modra <amodra@bigpond.net.au>
578 * po/POTFILES.in: Regenerate.
580 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
581 (insert_bat, extract_bat, insert_bba, extract_bba,
582 insert_bd, extract_bd, insert_bdm, extract_bdm,
583 insert_bdp, extract_bdp, valid_bo,
584 insert_bo, extract_bo, insert_boe, extract_boe,
585 insert_ds, extract_ds, insert_de, extract_de,
586 insert_des, extract_des, insert_li, extract_li,
587 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
588 insert_nb, extract_nb, insert_nsi, extract_nsi,
589 insert_ral, insert_ram, insert_ras,
590 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
591 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
592 (extract_bd, extract_bdm, extract_bdp,
593 extract_ds, extract_des,
594 extract_li, extract_nsi): Implement sign extension without conditional.
595 (insert_bdm, extract_bdm,
596 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
597 (extract_bdm, extract_bdp): Correct 32 bit validation.
598 (AT1_MASK, AT2_MASK): Define.
599 (BBOAT_MASK): Define.
600 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
601 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
602 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
603 (PPCCOM32, PPCCOM64): Define.
604 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
605 and add new patterns to implement 64 bit branches with hints. Move
606 booke instructions so they match before ppc64.
608 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
609 64 bit default targets, and parse "32" and "64" in options.
611 (print_insn_powerpc): Pass dialect to operand->extract.
613 2001-11-14 Dave Brolley <brolley@redhat.com>
615 * cgen-dis.c (count_decodable_bits): New function.
616 (add_insn_to_hash_chain): New function.
617 (hash_insn_array): Call add_insn_to_hash_chain.
618 (hash_insn_list): Call add_insn_to_hash_chain.
619 * m32r-dis.c: Regenerated.
620 * fr30-dis.c: Regenerated.
622 2001-11-14 Andreas Jaeger <aj@suse.de>
624 * i386-dis.c (print_insn): Use x86-64 as option.
626 2001-11-14 Alan Modra <amodra@bigpond.net.au>
628 * disassemble.c (disassembler): Call print_insn_i386.
629 * i386-dis.c (SUFFIX_ALWAYS): Define.
630 (struct dis_private): Add orig_sizeflag.
631 (print_insn_i386): Make it a wrapper, calling..
632 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
633 warning without using volatile by moving orig_sizeflag to priv,
634 and removing inbuf. Parse disassembler_options.
635 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
637 (putop): Remove #ifdef SUFFIX_ALWAYS.
639 2001-11-11 Timothy Wall <twall@alum.mit.edu>
641 * tic54x-dis.c: Use revised opcode structure. Export opcode
643 (has_lkaddr): Don't forget about Lmem insns.
644 * tic54x-opc.c: Add emulation trap. Parallel table now uses
645 standard opcode templates.
647 2001-11-13 Zack Weinberg <zack@codesourcery.com>
649 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
650 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
651 category instead of Ew.
653 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
655 * m68k-opc.c: Fix definitions of wddata[bwl].
657 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
659 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
660 fit in the buffer, try to match the empty keyword.
662 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
664 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
665 * fr30-ibld.c: Regenerate.
666 * m32r-ibld.c: Regenerate.
667 * openrisc-ibld.c: Regenerate.
669 2001-11-04 Chris Demetriou <cgd@broadcom.com>
671 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
673 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
675 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
676 * configure: Regernate.
677 * po/fr.po: New file.
678 * po/sv.po: New file.
679 * po/tr.po: New file.
681 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
683 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
686 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
688 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
690 * Makefile.in: Regenerate.
691 * mmix-dis.c, mmix-opc.c: New files.
693 2001-10-29 Kazu Hirata <kazu@hxi.com>
695 * d30v-dis.c: Fix a comment typo.
697 2001-10-23 Chris Demetriou <cgd@broadcom.com>
699 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
700 "bltzall" as writing GPR 31 (since they do).
702 * mips-dis.c (print_insn_arg): Calculate info->target
704 (print_insn_mips): Fill in instruction info.
705 (print_mips16_insn_arg): Remove unneded variable 'val'.
706 Removed duplicated instruction target calculations,
707 calculate once and print that result. Use same idiom for
708 masking the jump segment bits as is used in print_insn_arg.
710 2001-10-20 Alan Modra <amodra@bigpond.net.au>
712 * ppc-opc.c (CT): Make it an optional operand.
714 2001-10-17 Chris Demetriou <cgd@broadcom.com>
716 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
717 SB-1 binaries include instructions specific to the SB-1.
718 * mips-opc.c (SB1): New definition.
719 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
720 "recip.ps", "rsqrt.ps", and "sqrt.ps".
722 2001-10-17 matthew green <mrg@redhat.com>
724 * ppc-opc.c (STRM): New AltiVec operand.
725 (XDSS): New AltiVec instruction form.
726 (mtvscr): Correct operand list.
727 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
729 2001-10-17 Alan Modra <amodra@bigpond.net.au>
731 * po/POTFILES.in: Regenerate.
733 2001-10-13 matthew green <mrg@redhat.com>
735 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
736 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
737 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
739 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
741 * cgen-ibld.in: Include safe-ctype.h in preference to
743 * cgen-asm.in: Include safe-ctype.h in preference to
744 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
745 TOLOWER instead of tolower.
746 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
747 string elements in constructed regular expression.
748 * fr30-asm.c: Regenerate.
749 * fr30-desc.c: Regenerate.
750 * fr30-ibld.c: Regenerate.
751 * m32r-asm.c: Regenerate.
752 * m32r-desc.c: Regenerate.
753 * m32r-ibld.c: Regenerate.
754 * openrisc-asm.c: Regenerate.
755 * openrisc-desc.c: Regenerate.
756 * openrisc-ibld.c: Regenerate.
757 * po/opcodes.pot: Regenerate.
759 2001-10-12 matthew green <mrg@redhat.com>
761 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
762 instruction field instruction/extraction functions for new BookE
763 DE form instructions.
764 (CT): New macro for CT field in an X form instruction.
765 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
767 (PPC64): Don't include PPC_OPCODE_PPC.
768 (403): New opcode macro for PPC403 processors.
769 (BOOKE): New opcode macro for BookE processors.
770 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
771 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
772 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
773 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
774 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
775 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
776 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
777 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
778 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
779 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
780 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
781 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
782 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
783 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
785 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
786 for a disassembler option of `booke', `booke32' or `booke64' to enable
787 BookE support in the disassembler.
789 2001-10-12 John Healy <jhealy@redhat.com>
791 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
792 for the length when extracting the base part of the insn.
794 2001-10-09 Bruno Haible <haible@clisp.cons.org>
796 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
797 regular expression. Fix some formatting problems.
798 * fr30-asm.c: Regenerate.
799 * openrisc-asm.c: Regenerate.
800 * m32r-asm.c: Regenerate.
802 2001-10-09 Christian Groessler <cpg@aladdin.de>
804 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
805 of indirect register memory accesses to be same format the
808 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
810 * sh-opc.h: Fix encoding of least significant nibble of the
811 DSP single data transfer instructions.
813 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
816 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
818 * cgen-asm.in: Fix compile time warning messages in generated
820 * cgen-dis.in: The same.
821 * cgen-ibld.in: The same.
822 * fr30-asm.c: Regenerate.
823 * fr30-desc.c: Regenerate.
824 * fr30-dis.c: Regenerate.
825 * fr30-ibld.c: Regenerate.
826 * fr30-opc.c: Regenerate.
827 * m32r-asm.c: Regenerate.
828 * m32r-desc.c: Regenerate.
829 * m32r-dis.c: Regenerate.
830 * m32r-ibld.c: Regenerate.
831 * m32r-opc.c: Regenerate.
832 * m32r-opinst.c Regenerate.
833 * openrisc-asm.c: Regenerate.
834 * openrisc-desc.c: Regenerate.
835 * openrisc-dis.c: Regenerate.
836 * openrisc-ibld.c: Regenerate.
837 * openrisc-opc.c: Regenerate.
838 * openrisc-opc.h: Regenerate.
839 * Makefile.in: Regenerate.
840 * po/POTFILES.in: Regenerate.
841 * po/opcodes.pot: Regenerate.
843 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
845 * arm-opc.h (arm_opcodes): Add cirrus insns.
847 * arm-dis.c (print_insn_arm): Add 'I' case.
849 2001-10-03 Alan Modra <amodra@bigpond.net.au>
851 * po/POTFILES.in: Regenerate.
852 * configure: Regenerate.
854 2001-10-02 Alan Modra <amodra@bigpond.net.au>
856 * Makefile.am (Makefile): Depend on bfd/configure.in.
858 * Makefile.in: Regenerate.
860 2001-09-30 John Healy <jhealy@redhat.com>
862 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
863 calls to cgen_get_insn_value and cgen_put_insn_value calls.
864 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
866 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
868 * Makefile.am: Update dependencies with "make dep-am".
869 * Makefile.in: Regenerate.
871 2001-09-26 Alan Modra <amodra@bigpond.net.au>
873 * arc-dis.c: Formatting fixes.
874 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
876 2001-09-21 Bruno Haible <haible@clisp.cons.org>
878 * arc-dis.c: Don't include <ctype.h>.
879 * openrisc-desc.c: Likewise.
880 * openrisc-ibld.c: Likewise.
882 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
884 * fr30-opc.c: Fix compile time warning messages.
885 * i370-opc.c: Fix compile time warning messages.
886 * i960-dis.c: Fix compile time warning messages.
887 * m32r-asm.c: Fix compile time warning messages.
888 * m32r-desc.c: Fix compile time warning messages.
889 * m32r-dis.c: Fix compile time warning messages.
890 * m32r-ibld.c: Fix compile time warning messages.
891 * m32r-opc.c: Fix compile time warning messages.
892 * m32r-opinst.c: Fix compile time warning messages.
893 * ns32k-dis.c: Fix compile time warning messages.
894 * openrisc-asm.c: Fix compile time warning messages.
895 * openrisc-desc.c: Fix compile time warning messages.
896 * openrisc-dis.c: Fix compile time warning messages.
897 * openrisc-ibld.c: Fix compile time warning messages.
898 * openrisc-opc.c: Fix compile time warning messages.
899 * pdp11-dis.c: Fix compile time warning messages.
900 * tic54x-dis.c: Fix compile time warning messages.
901 * v850-opc.c: Fix compile time warning messages.
902 * vax-dis.c: Fix compile time warning messages.
903 * w65-opc.h: Fix compile time warning messages.
904 * z8k-opc.h: Fix compile time warning messages.
905 * z8kgen.c: Fix compile time warning messages.
907 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
909 * arm-dis.c: Fix compile time warning messages.
910 * cgen-asm.c: Fix compile time warning messages.
911 * cgen-dis.c: Fix compile time warning messages.
912 * cris-dis.c: Fix compile time warning messages.
913 * d10v-dis.c: Fix compile time warning messages.
914 * fr30-asm.c: Fix compile time warning messages.
915 * fr30-desc.c: Fix compile time warning messages.
916 * fr30-dis.c: Fix compile time warning messages.
917 * fr30-ibld.c: Fix compile time warning messages.
919 2001-09-18 Bruno Haible <haible@clisp.cons.org>
921 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
922 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
923 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
924 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
926 (cgen_keyword_add): Use ISALNUM instead of isalnum.
927 (hash_keyword_name): Use TOLOWER instead of tolower.
928 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
929 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
931 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
932 * fr30-desc.c: Don't include <ctype.h>.
933 * fr30-ibld.c: Likewise.
934 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
935 (load_insn_classes, parse_resource_users, load_depfile): Use
936 ISSPACE instead of isspace.
937 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
938 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
940 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
941 * m32r-desc.c: Don't include <ctype.h>.
942 * m32r-ibld.c: Likewise.
943 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
944 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
946 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
948 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
950 * Makefile.am: Add rules and dependencies to create the s/390 opcode
951 table out of s390-opc.txt automatically.
952 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
953 * s390-mkopc.c (dumpTable): Change output to create a complete file.
954 * s390-opc.c: New improved opcode format macros and remove the
955 pregenerated opcode table.
956 * s390-opc.txt: Adapt to new improved opcode format macros.
958 2001-09-14 David Schleef <ds@schleef.org>
960 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
962 2001-09-04 Alan Modra <amodra@bigpond.net.au>
964 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
965 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
967 2001-08-31 Eric Christopher <echristo@redhat.com>
968 Jason Eckhardt <jle@redhat.com>
970 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
971 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
974 2001-08-31 Andreas Jaeger <aj@suse.de>
976 * tic54x-opc.c: Add default initializers to avoid warnings.
978 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
979 * arc-ext.c: Likewise.
981 2001-08-28 matthew green <mrg@redhat.com>
983 * ppc-opc.c (icbt): Order correctly.
985 2001-08-27 David Edelsohn <dje@watson.ibm.com>
986 Torbjorn Granlund <tege@swox.com>
988 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
990 (insert_ds): Complain if not a multiple of 4.
992 (XSYNC_MASK): Define.
993 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
994 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
996 2001-08-26 Andreas Jaeger <aj@suse.de>
998 * h8500-opc.h: Add default initializers to h8500_table to shut up
1001 2001-08-25 Andreas Jaeger <aj@suse.de>
1003 * tic54x-dis.c: Add unused attributes where needed.
1005 * z8k-dis.c (output_instr): Add unused attribute.
1007 * h8300-dis.c: Add missing prototypes.
1008 (bfd_h8_disassemble): Make static.
1010 * cris-dis.c: Add missing prototype.
1011 * h8500-dis.c: Likewise.
1012 * m68hc11-dis.c: Likewise.
1013 * pj-dis.c: Likewise.
1014 * tic54x-dis.c: Likewise.
1015 * v850-dis.c: Likewise.
1016 * vax-dis.c: Likewise.
1017 * w65-dis.c: Likewise.
1018 * z8k-dis.c: Likewise.
1020 * d10v-dis.c: Add missing prototype.
1021 (dis_long): Remove unused variable.
1022 (dis_2_short): Likewise.
1024 * sh-dis.c: Add missing prototypes.
1025 * v850-opc.c: Likewise.
1026 Add unused attributes where needed.
1028 * ns32k-dis.c: Add missing prototypes.
1029 (bit_extract_simple): Remove unused variable.
1031 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1033 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1034 branch instructions for gcc 3.0.
1035 * opcodes/s390-opc.txt: Likewise.
1037 2001-08-21 Andreas Jaeger <aj@suse.de>
1039 * i960-dis.c: Add parameters for prototypes
1040 (ctrl): Add unused attributes.
1042 (put_abs): Likewise.
1044 * mips-dis.c: Add missing prototypes.
1045 * a29k-dis.c: Likewise.
1046 * arc-dis.c: Likewise.
1047 * ia64-opc.c: Likewise.
1049 * s390-dis.c: Add missing prototypes.
1050 (init_disasm): Remove unused attribute since the parameter is
1053 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1055 * mips-opc.c (M1): Define. Reformatted Code.
1056 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1059 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1061 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1062 the corresponding non-likely insn is in MIPS I.
1064 2001-08-13 Kazu Hirata <kazu@hxi.com>
1066 * mcore-dis.c: Fix formatting.
1067 * mips-dis.c: Likewise.
1068 * pj-dis.c: Likewise.
1069 * z8k-dis.c: Likewise.
1071 2001-08-12 Richard Henderson <rth@redhat.com>
1073 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1074 to *VALUEP. Regenerate all cgen files.
1076 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1078 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1080 * mips-opc.c (G6): Undefine.
1081 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1082 as the first "move" alternative.
1084 2001-08-10 Andreas Jaeger <aj@suse.de>
1086 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1088 * configure: Regenerate.
1090 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1092 * ppc-opc.c: Revert 2001-08-08.
1094 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1096 * dis-buf.c (generic_strcat_address): Add missing prototype.
1097 #if 0 the functions as it is unused.
1099 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1101 1999-10-25 Torbjorn Granlund <tege@swox.com>
1102 * ppc-opc.c: Include "bfd.h".
1103 (powerpc_operands): Add new field for reloc type.
1105 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1107 * mips-dis.c (print_insn_arg): Don't use software integer registers
1108 for coprocessor registers.
1109 (get_mips_isa): Removed.
1110 (is_newabi): New function, checks if NewABI is used.
1111 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1113 2001-08-01 Christian Groessler <cpg@aladdin.de>
1115 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1116 get stderr definition.
1117 (internal, gas): Removed warnings.
1118 (gas): Create a correct final entry for created array.
1119 * z8k-opc.h: Recreated with new z8kgen.
1121 2001-07-28 Kazu Hirata <kazu@hxi.com>
1123 * i386-dis.c: Fix formatting.
1125 2001-07-28 Matthias Kramm <kramm@quiss.org>
1127 * i386-dis.c: Change formatting conventions for architecture
1128 i386:intel to better match the format of various intel i386
1129 assemblers, like nasm, tasm or masm.
1131 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1133 * Makefile.am: Update dependencies with "make dep-am".
1134 * Makefile.in: Regenerate
1136 2001-07-24 Kazu Hirata <kazu@hxi.com>
1138 * alpha-dis.c: Fix formatting.
1139 * cris-dis.c: Likewise.
1140 * d10v-dis.c: Likewise.
1141 * d30v-dis.c: Likewise.
1142 * m10300-dis.c: Likewise.
1143 * tic54x-dis.c: Likewise.
1145 2001-07-23 Kazu Hirata <kazu@hxi.com>
1147 * m68k-dis.c: Fix formatting.
1148 * pj-dis.c: Likewise.
1149 * s390-dis.c: Likewise.
1150 * z8k-dis.c: Likewise.
1152 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1154 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1155 into the rest of the surrounding definitions.
1157 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1159 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1160 for lgdt, lidt, sgdt, sidt.
1162 2001-07-13 Philip Blundell <philb@gnu.org>
1164 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1166 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1168 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1170 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1171 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1172 to verify if it is worth parsing the insn as insn "x". Also update
1173 error message when insn is not a recognized format of the insn vs
1174 when the insn is completely unrecognized.
1176 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1178 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1180 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1181 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1183 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1185 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1186 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1187 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1189 2001-07-05 Ben Elliston <bje@redhat.com>
1191 * Makefile.am (CPUDIR): Define.
1192 (stamp-m32r): Update dependencies.
1193 (stamp-fr30): Ditto.
1194 (stamp-openrisc): Ditto.
1195 * Makefile.in: Regenerate.
1197 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1199 * ppc-opc.c: Fix encoding of 'clf' instruction.
1201 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1203 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1205 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1207 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1208 * cgen-opc.c (cgen_keyword_add): Ignore special first
1209 character when building nonalpha_chars field.
1211 2001-06-24 Ben Elliston <bje@redhat.com>
1213 * m88k-dis.c: Format to conform to GNU coding standards.
1215 2001-06-23 Andreas Jaeger <aj@suse.de>
1217 * disassemble.c (disassembler_usage): Add unused attribute.
1219 2001-06-22 Eric Christopher <echristo@redhat.com>
1221 * mips-opc.c: Move prefx to start of the table.
1223 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1225 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1228 2001-06-22 Pauli <pauli@moreton.com.au>
1230 * m68k-opc.c: Add wdebug instruction.
1232 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1234 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1236 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1238 * cgen-asm.c (cgen_parse_keyword): When looking for the
1239 boundaries of a keyword, allow any special characters
1240 that are actually in one of the allowed keyword.
1241 * cgen-opc.c (cgen_keyword_add): Add any special characters
1242 to the nonalpha_chars field.
1244 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1246 * s390-opc.c: Add lgh instruction.
1247 * s390-opc.txt: Likewise.
1249 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1251 * i386-dis.c: Group function prototypes in one place.
1252 (FLOATCODE): Redefine as 1.
1253 (USE_GROUPS): Redefine as 2.
1254 (USE_PREFIX_USER_TABLE): Redefine as 3.
1255 (X86_64_SPECIAL): Define as 4.
1256 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1257 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1258 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1259 (dis386): New table combining above four tables.
1260 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1261 (dis386_twobyte): New table combining above two tables.
1262 (x86_64_table): New table to handle x86_64.
1264 (float_mem_att, float_mem_intel): Delet.
1265 (float_mem): New table combining above two tables.
1266 (print_insn_i386): Modify for above.
1267 (dofloat): Likewise.
1268 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1269 Return 0 on success, 1 if no valid alternative.
1270 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1271 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1272 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1273 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1275 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1276 (OP_I64): If not 64-bit mode, call OP_I.
1277 OP_OFF64): If not 64-bit mode, call OP_OFF.
1278 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1279 'ignore'/'ignored' to 'bytemode'.
1281 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1283 * configure.in: Sort 'ta' case statement.
1284 * configure: Regenerate.
1286 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1288 (disx86_64_att): Likewise.
1289 (dis386_twobyte_att): Likewise.
1290 (print_insn_i386): Don't print branch hints as a prefix.
1291 (putop): 'H' macro prints branch hints.
1292 (get64): Kill compile warnings.
1294 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1296 * sh-opc.h (sh_table): Don't use empty initializers.
1298 2001-06-06 Christian Groessler <cpg@aladdin.de>
1300 * z8k-dis.c: Fix formatting.
1301 (unpack_instr): Remove unused cases in switch statement. Add
1302 safety abort() in default case.
1303 (unparse_instr): Add safety abort() in default case.
1305 2001-06-06 Peter Jakubek <pjak@snafu.de>
1307 * m68k-dis.c (print_insn_m68k): Fix typo.
1308 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1309 mcf (ColdFire) div, rem and moveb instructions.
1311 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1313 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1314 (cond_jump_mode, loop_jcxz_mode): Define.
1315 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1316 appropriate, and 'F' suffix to loop insns.
1317 (disx86_64_att): Likewise.
1318 (dis386_twobyte_att): Likewise.
1319 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1320 Output data size prefix for long conditional jumps. Output cs and
1322 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1323 (OP_J): Don't make PREFIX_DATA used.
1325 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1327 * sh-opc.h (sh_table): Complete last element entry to avoid
1330 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1332 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1334 2001-05-23 Alan Modra <amodra@one.net.au>
1336 * arc-opc.c: Whitespace changes.
1338 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1340 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1343 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1345 * cgen-dis.in (extract_normal): Complete support for min<base case.
1347 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1349 * mips-dis.c (INSNLEN): Rename MAXLEN.
1350 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1351 (print_insn_arg): Remove $ prefix of register names.
1352 (set_mips_isa_type): Remove.
1353 (mips_isa_type): New function.
1354 (get_mips_isa): New Function.
1355 (print_insn_mips): Rename _print_insn_mips.
1356 (_print_insn_mips): New function, contains code which was
1357 duplicated in print_insn_big_mips and print_insn_little_mips.
1358 (print_insn_big_mips): Moved code to _print_insn_mips.
1359 (print_insn_little_mips): Likewise.
1360 (print_mips16_insn_arg): Remove $ prefix of register names.
1361 Print error message before abort.
1363 2001-05-14 J.T. Conklin <jtc@redback.com>
1365 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1366 simplified mnemonics used for setting PPC750-specific special
1369 2001-05-12 H.J. Lu <hjl@gnu.org>
1371 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1374 2001-05-12 Peter Targett <peter.targett@arccores.com>
1376 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1377 register to r/w. Formatting fixes throughout file.
1379 2001-05-12 Alan Modra <amodra@one.net.au>
1381 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1383 (twobyte_has_modrm): Update table.
1384 (need_modrm): Give it file scope.
1385 (MODRM_CHECK): Define.
1386 (dofloat): Use MODRM_CHECK.
1391 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1393 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1394 even at end of a section.
1395 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1396 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1398 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1400 * disassemble.c (disassembler_usage): Remove unused attribute.
1402 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1404 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1406 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1408 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1409 assume incoming buffer already has the base insn loaded. Handle
1410 smaller-than-base instructions for variable-length case.
1412 2001-05-04 Alan Modra <amodra@one.net.au>
1414 * i386-dis.c (Ev, Ed): Remove duplicate define.
1417 (OP_XS): New function.
1418 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1420 (dis386_twobyte_intel): Likewise.
1421 (prefix_user_table): Use MS for maskmovq operand.
1423 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1425 * Makefile.am: Add OpenRISC target.
1426 * Makefile.in: Regenerated.
1428 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1430 * configure.in (bfd_openrisc_arch): Add target.
1431 * configure: Regenerated.
1433 * openrisc-asm.c: New file.
1434 * openrisc-desc.c: Likewise.
1435 * openrisc-desc.h: Likewise.
1436 * openrisc-dis.c: Likewise.
1437 * openrisc-ibld.c: Likewise.
1438 * openrisc-opc.c: Likewise.
1439 * openrisc-opc.h: Likewise.
1441 2001-04-24 Christian Groessler <cpg@aladdin.de>
1443 * z8k-dis.c: add names of control registers (ctrl_names);
1444 (seg_length): provides instruction length fixup for segmented
1445 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1446 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1447 (unparse_intr): handle CLASS_PR, print addresses without '#'
1448 * z8k-opc.h: re-created with new z8kgen
1449 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1450 entries for ldctl/ldctlb instruction
1452 2001-04-06 Andreas Jaeger <aj@suse.de>
1454 * i386-dis.c: Add ffreep instruction.
1456 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1458 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1460 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1462 * i386-dis.c (PREGRP25): Define.
1463 (dis386_twobyte_att): Use here in place of "movntq" entry.
1464 (dis386_twobyte_intel): Likewise.
1465 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1467 (dis386_twobyte_att): Use here.
1468 (dis386_twobyte_intel): Likewise.
1469 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1470 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1471 (prefix_user_table): Cosmetic changes to "bad" entries.
1473 2001-03-23 Nick Clifton <nickc@redhat.com>
1475 * mips-opc.c: Remove extraneous whitespace.
1476 * mips-dis.c: Remove extraneous whitespace.
1478 2001-03-22 Ben Elliston <bje@redhat.com>
1480 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1481 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1482 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1483 to allay a compiler warning.
1485 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1487 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1488 (dis386_twobyte_intel): Likewise.
1489 (twobyte_has_modrm): Set entry for paddq, psubq.
1491 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1493 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1494 determination via CGEN_COMPUTE_MACH.
1495 * fr30-desc.c: Regenerate.
1496 * fr30-dis.c: Regenerate.
1497 * fr30-opc.h: Regenerate.
1498 * m32r-desc.c: Regenerate.
1499 * m32r-dis.c: Regenerate.
1500 * m32r-opc.h: Regenerate.
1501 * m32r-opinst.c: Regenerate.
1503 2001-03-20 H.J. Lu <hjl@gnu.org>
1505 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1506 * configure: Rebuild.
1508 2001-03-19 Jim Wilson <wilson@redhat.com>
1510 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1511 notestr if larger than xsect.
1512 (in_class): Handle format M5.
1513 * ia64-asmtab.c: Regnerate.
1515 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1517 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1518 has more than one byte left to read.
1520 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1522 * s390-opc.c: Add new opcodes. Smooth out formatting.
1523 * s390-opc.txt: Add new opcodes.
1525 2001-03-06 Nick Clifton <nickc@redhat.com>
1527 * arm-dis.c (print_insn_thumb): Compute destination address
1528 of BLX(1) instruction by taking bit 1 from PC and not from bit
1531 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1533 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1534 so command line switches will work.
1536 2001-03-05 Dave Brolley <brolley@redhat.com>
1538 * fr30-asm.c: Regenerate.
1539 * fr30-desc.c: Regenerate.
1540 * fr30-desc.h: Regenerate.
1541 * fr30-dis.c: Regenerate.
1542 * fr30-ibld.c: Regenerate.
1543 * fr30-opc.c: Regenerate.
1544 * fr30-opc.h: Regenerate.
1545 * m32r-asm.c: Regenerate.
1546 * m32r-desc.c: Regenerate.
1547 * m32r-desc.h: Regenerate.
1548 * m32r-dis.c: Regenerate.
1549 * m32r-ibld.c: Regenerate.
1550 * m32r-opc.c: Regenerate.
1551 * m32r-opc.h: Regenerate.
1552 * m32r-opinst.c: Regenerate.
1554 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1556 * m68k-opc.c: fix cpushl according to Motorola. Enable
1557 bunch of instructions for Coldfire 5407 and add all new.
1559 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1561 * configure.in (BFD_VERSION): Do without grep.
1562 * configure: Regenerate.
1563 * Makefile.am: Run "make dep-am".
1564 * Makefile.in: Regenerate.
1566 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1568 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1569 * ia64-asmtab.c: Regenerate.
1571 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1573 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1574 separate variants: one for IMM22 and the other for IMM14.
1575 * ia64-asmtab.c: Regenerate.
1577 2001-02-21 Greg McGary <greg@mcgary.org>
1579 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1581 2001-02-20 H.J. Lu <hjl@gnu.org>
1583 * Makefile.am (ia64-ic.tbl): Remove the target.
1584 (ia64-raw.tbl): Likewise.
1585 (ia64-waw.tbl): Likewise.
1586 (ia64-war.tbl): Likewise.
1587 (ia64-asmtab.c): Generate it in the source directory.
1588 * Makefile.in: Regenerated.
1590 2001-02-18 lars brinkhoff <lars@nocrew.org>
1592 * Makefile.am: Add PDP-11 target.
1593 * configure.in: Likewise.
1594 * disassemble.c: Likewise.
1595 * pdp11-dis.c: New file.
1596 * pdp11-opc.c: New file.
1598 2001-02-14 Jim Wilson <wilson@redhat.com>
1600 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1601 * ia64-asmtab.c: Regenerate.
1603 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1605 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1609 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1611 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1612 the following instruction not of the jump itself for the jump
1614 (print_mips16_insn_arg): Likewise.
1616 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1618 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1620 * Makefile.in: Regenerate.
1622 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1624 * Makefile.am: Add linux target for S/390.
1625 * Makefile.in: Likewise.
1626 * configure.in: Likewise.
1627 * disassemble.c: Likewise.
1628 * s390-dis.c: New file.
1629 * s390-mkopc.c: New file.
1630 * s390-opc.c: New file.
1631 * s390-opc.txt: New file.
1633 2001-02-05 Jim Wilson <wilson@redhat.com>
1635 * ia64-asmtab.c: Revert 2000-12-16 change.
1637 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1639 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1640 * m32r-desc.h: Regenerate.
1642 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1644 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1645 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1647 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1649 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1651 2001-01-13 Nick Clifton <nickc@redhat.com>
1653 * disassemble.c: Remove spurious white space.
1655 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1657 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1660 2001-01-11 Peter Targett <peter.targett@arccores.com>
1662 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1663 * Makefile.am (C_FILES): Add arc-ext.c.
1664 (ALL_MACHINES) Add arc-ext.lo.
1665 (INCLUDES) Add opcode directory to list.
1666 New dependency entry for arc-ext.lo.
1667 * disassemble.c (disassembler): Correct call to
1668 arc_get_disassembler.
1669 * arc-opc.c: New update for ARC, including full base
1670 instructions for ARC variants.
1671 * arc-dis.h, arc-dis.c: New update for ARC, including
1672 extensibility functionality.
1673 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1675 2001-01-10 Jan Hubicka <jh@suse.cz>
1677 * i386-dis.c (PREGRP15 - PREGRP24): New.
1678 (dis386_twobyt): Add SSE2 instructions.
1679 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1680 (twobyte_uses_f3_prefix): ... this one.
1681 (grps): Add SSE instructions.
1682 (prefix_user_table): Add two new slots; add SSE2 instructions.
1683 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1684 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1685 to prefix_user_table.
1686 (OP_E): Accept mfence and lfence as well.
1687 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1688 (OP_XMM): Support REX extensions.
1692 2001-01-09 Nick Clifton <nickc@redhat.com>
1694 * arm-dis.c (print_insn): Set pc to zero for instructions with
1695 a reloc associated with them.
1697 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1699 * cgen-asm.in (parse_insn_normal): Changed syn to be
1700 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1701 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1702 to '\0' to use 0 instead.
1703 * cgen-dis.in (print_insn_normal): Ditto.
1704 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1706 2001-01-05 Jan Hubicka <jh@suse.cz>
1708 * i386-dis.c: Add x86_64 support.
1709 (rex): New static variable.
1710 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1711 (USED_REX): New macro.
1712 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1713 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1714 (OP_REG, OP_OFF): Declare.
1715 (get64, get32, get32s): New functions.
1716 (r??_reg): New constants.
1717 (dis386_att): Change templates of instruction implicitly promoted
1718 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1720 (dis386_intel): Likewise.
1721 (dixx86_64_att): New table based on dis386_att.
1722 (dixx86_64_intel): New table based on dis386_intel.
1723 (names64, names8rex): New global variable.
1724 (names32, names16): Add extended registers.
1725 (prefix_user_t): Recognize rex prefixes.
1726 (prefix_name): Print REX prefixes nicely.
1727 (op_riprel): New global variable.
1728 (start_pc): Set type to bfd_vma.
1729 (print_insn_i386): Detect the 64bit mode and use proper table;
1730 move ckprefix after initializing the buffer; output unused rex prefixes;
1731 output information about target of RIP relative addresses.
1732 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1733 (print_operand_value): New function.
1734 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1735 REX prefix and new modes.
1736 (get64, get32s): New.
1737 (get32): Return bfd_signed_vma type.
1738 (set_op): Initialize the op_riprel.
1739 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1741 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1743 cgen-dis.in (read_insn): Use bfd_get_bits()
1745 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1747 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1748 (hash_insn_list): Likewise
1749 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1750 (extract_1): Use bfd_get_bits().
1751 (extract_normal): Apply sign extension to both extraction
1753 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1754 (cgen_put_insn_value): Use bfd_put_bits()
1756 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1758 * cgen-asm.in (parse_insn_normal): Print better error message for
1759 instructions with missing operands.
1761 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1763 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1765 2000-12-16 Nick Clifton <nickc@redhat.com>
1767 * Makefile.in: Regenerate.
1768 * aclocal.m4: Regenerate.
1769 * config.in: Regenerate.
1770 * configure.in: Add spacing.
1771 * configure: Regenerate.
1772 * ia64-asmtab.c: Regenerate.
1773 * po/opcodes.pot: Regenerate.
1775 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1777 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1778 error messages over later parse-time ones.
1780 2000-12-12 Jim Wilson <wilson@redhat.com>
1782 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1784 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1785 (print_dependency_table): Print NULL if semantics field not set.
1786 (insert_opcode_dependencies): Mark cmp parameter as unused.
1787 (print_main_table): Use fprintf_vma to print long long fields.
1788 (main): Mark argv paramter as unused. Convert to old style definition.
1789 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1790 * ia64-asmtab.c: Regnerate.
1792 2000-12-09 Nick Clifton <nickc@redhat.com>
1794 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1797 * fr30-dis.c: Regenerate.
1799 2000-12-08 Peter Targett <peter.targett@arccores.com>
1801 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1802 * Makefile.am (C_FILES): Add arc-ext.c.
1803 (ALL_MACHINES) Add arc-ext.lo.
1804 (INCLUDES) Add opcode directory to list.
1805 New dependency entry for arc-ext.lo.
1806 * disassemble.c (disassembler): Correct call to
1807 arc_get_disassembler.
1808 * arc-opc.c: New update for ARC, including full base
1809 instructions for ARC variants.
1810 * arc-dis.h, arc-dis.c: New update for ARC, including
1811 extensibility functionality.
1812 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1814 2000-12-03 Chris Demetriou cgd@sibyte.com
1816 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1817 MOD_HILO, and MOD_LO macros.
1819 * mips-opc.c (M1, M2): Delete.
1820 (mips_builtin_opcodes): Remove all uses of M1.
1822 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1823 instructions take "G" format second operands and use the
1825 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1827 Delete "sel" code operands from mfc1 and mtc1.
1828 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1831 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1832 Chris Demetriou cgd@sibyte.com
1834 * mips-opc.c (mips_builtin_opcodes): Finish additions
1835 for MIPS32 support, and clean up existing entries for
1836 aesthetics, consistency with the MIPS32 ISA, and
1837 with consistency the rest of the table.
1839 2000-12-01 Nick Clifton <nickc@redhat.com>
1841 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1844 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1846 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1847 specifiers. Update 'B' for new constant names, and remove
1849 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1850 near the top of the array, so they are disassembled properly.
1851 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1852 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1853 specifier. Add 'H' format specifier variants for "mfc1,"
1854 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1855 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1856 "wait" variant which uses 'J' operand specifier.
1858 * mips-dis.c (set_mips_isa_type): Update to use
1859 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1860 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1861 * mips-opc.c (I32): New constant for instructions added in
1864 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1866 * mips-dis.c (set_mips_isa_type): Add cases for
1867 bfd_mach_mips5 and bfd_mach_mips64.
1868 * mips-opc.c (I64): New definitions.
1870 * mips-dis.c (set_mips_isa_type): Add case for
1873 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1875 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1876 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1877 Initialize variable dc to NULL.
1878 (print_insn_shx): Remove unused label d_reg_n.
1880 2000-11-24 Nick Clifton <nickc@redhat.com>
1882 * arm-opc.h: Add new opcode formatting parameter 'B'.
1883 (arm_opcodes): Add XScale, v5, and v5te instructions.
1884 (thumb_opcodes): Add v5t instructions.
1886 * arm-dis.c (print_insn_arm): Handle new 'B' format
1888 (print_insn_thumb): Decode BLX(1) instruction.
1890 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1892 * mips-opc.c: Fix file header comment.
1894 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1896 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1897 print_insn_cris_with_register_prefix.
1899 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1901 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1903 2000-11-07 Matthew Green <mrg@redhat.com>
1905 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1906 must be loaded there in their entirety.
1908 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1910 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1911 (compute_arch_mask): Add v8plusb and v9b machines.
1912 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1913 * sparc-opc.c: Support for Cheetah instruction set.
1914 (prefetch_table): Add #invalidate.
1916 2000-10-16 Nick Clifton <nickc@redhat.com>
1918 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1920 2000-10-06 Dave Brolley <brolley@redhat.com>
1922 * fr30-desc.h: Regenerate.
1923 * m32r-desc.h: Regenerate.
1924 * m32r-ibld.c: Regenerate.
1926 2000-10-05 Jim Wilson <wilson@redhat.com>
1928 * ia64-ic.tbl: Update from Intel.
1929 * ia64-asmtab.c: Regenerate.
1931 2000-10-04 Kazu Hirata <kazu@hxi.com>
1933 * ia64-gen.c: Convert C++-style comments to C-style comments.
1934 * tic54x-dis.c: Likewise.
1936 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1938 Changes to add dollar prefix to registers for files where user symbols
1939 don't have a leading underscore. Fix formatting.
1940 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1941 (format_reg): Add parameter with_reg_prefix. All callers changed.
1942 (print_with_operands): Ditto.
1943 (print_insn_cris_generic): Renamed from print_insn_cris, add
1944 parameter with_reg_prefix.
1945 (print_insn_cris_with_register_prefix,
1946 print_insn_cris_without_register_prefix, cris_get_disassembler):
1948 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1950 2000-09-22 Jim Wilson <wilson@redhat.com>
1952 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1953 gt, ge, ngt, and nge.
1954 * ia64-asmtab.c: Regenerate.
1956 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1957 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1958 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1959 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1960 * ia64-asmtab.c: Regnerate.
1962 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1964 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1965 Add mfc0 and mtc0 with sub-selection values.
1966 Add clo and clz opcodes.
1967 Add msub and msubu instructions for MIPS32.
1968 Add madd/maddu aliases for mad/madu for MIPS32.
1969 Support wait, deret, eret, movn, pref for MIPS32.
1970 Support tlbp, tlbr, tlbwi, tlbwr.
1973 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1974 (print_insn_arg): Handle 'H' args.
1975 (set_mips_isa_type): Recognize 4K.
1976 Use CPU_* defines instead of hardcoded numbers.
1978 2000-09-11 Catherine Moore <clm@redhat.com>
1980 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1981 (d30v_format_tab): Use Rb2 for modinc and moddec.
1983 2000-09-07 Catherine Moore <clm@redhat.com>
1985 * d30v-opc.c (d30v_format_tab): Use format Ra for
1988 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1990 * configure: Rebuilt with new libtool.m4.
1992 2000-09-05 Nick Clifton <nickc@redhat.com>
1994 * configure: Regenerate.
1995 * po/opcodes.pot: Regenerate.
1997 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1999 * acinclude.m4: Include libtool and gettext macros from the
2001 * aclocal.m4, configure: Rebuilt.
2003 2000-08-30 Kazu Hirata <kazu@hxi.com>
2005 * tic80-dis.c: Fix formatting.
2007 2000-08-29 Kazu Hirata <kazu@hxi.com>
2009 * w65-dis.c: Fix formatting.
2011 2000-08-28 Mark Hatle <mhatle@mvista.com>
2013 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
2014 (powerpc_opcodes): Add table entries for PPC 405 instructions.
2015 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2016 instructions. Added extended mnemonic mftbl as defined in the
2017 405GP manual for all PPCs.
2019 2000-08-28 Jim Wilson <wilson@redhat.com>
2021 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2022 call. Change last goto to use failed instead of done.
2024 2000-08-28 Dave Brolley <brolley@redhat.com>
2026 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2027 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2028 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2029 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2030 * cgen-dis.in (read_insn): New static function.
2031 (print_insn): Use read_insn to read the insn into the buffer and set
2033 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2035 * fr30-asm.c: Regenerated.
2036 * fr30-desc.c: Regenerated.
2037 * fr30-desc.h: Regenerated.
2038 * fr30-dis.c: Regenerated.
2039 * fr30-ibld.c: Regenerated.
2040 * fr30-opc.c: Regenerated.
2041 * fr30-opc.h: Regenerated.
2042 * m32r-asm.c: Regenerated.
2043 * m32r-desc.c: Regenerated.
2044 * m32r-desc.h: Regenerated.
2045 * m32r-dis.c: Regenerated.
2046 * m32r-ibld.c: Regenerated.
2047 * m32r-opc.c: Regenerated.
2049 2000-08-28 Kazu Hirata <kazu@hxi.com>
2051 * tic30-dis.c: Fix formatting.
2053 2000-08-27 Kazu Hirata <kazu@hxi.com>
2055 * sh-dis.c: Fix formatting.
2057 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2059 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2061 2000-08-24 Kazu Hirata <kazu@hxi.com>
2063 * z8k-dis.c: Fix formatting.
2065 2000-08-16 Jim Wilson <wilson@redhat.com>
2067 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2068 break, mov-immediate, nop.
2069 * ia64-opc-f.c: Delete fpsub instructions.
2070 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2071 address operand. Rewrite using macros to avoid long lines.
2072 * ia64-opc.h (POSTINC): Define.
2073 * ia64-asmtab.c: Regenerate.
2075 2000-08-15 Jim Wilson <wilson@redhat.com>
2077 * ia64-ic.tbl: Add missing entries.
2079 2000-08-08 Jason Eckhardt <jle@redhat.com>
2081 * i860-dis.c (print_br_address): Change third argument from int
2084 2000-08-07 Richard Henderson <rth@redhat.com>
2086 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2087 for MLI templates. Handle IA64_OPND_TGT64.
2089 2000-08-04 Ben Elliston <bje@redhat.com>
2091 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2092 * cgen.sh: Likewise.
2094 2000-08-02 Jim Wilson <wilson@redhat.com>
2096 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2098 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2100 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2101 Change return type from void to int. Check the combination
2102 of operands, return 1 if valid. Fix to avoid BUF overflow.
2103 Report undefined combinations of operands in COMMENT.
2104 Report internal errors to stderr. Output the adiw/sbiw
2105 constant operand in both decimal and hex.
2106 (print_insn_avr): Disassemble ldd/std with displacement of 0
2107 as ld/st. Check avr_operand () return value, handle invalid
2108 combinations of operands like unknown opcodes.
2110 2000-07-28 Ben Elliston <bje@redhat.com>
2112 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2113 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2114 * Makefile.in: Regenerate.
2115 * configure.in: Add --enable-cgen-maint option.
2116 * configure: Regenerate.
2118 2000-07-26 Dave Brolley <brolley@redhat.com>
2120 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2121 (cgen_hw_lookup_by_num): Ditto.
2122 (cgen_operand_lookup_by_name): Ditto.
2123 (print_address): Ditto.
2124 (print_keyword): Ditto.
2125 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2127 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2129 (cgen_parse_keyword): Ditto.
2131 2000-07-22 Jason Eckhardt <jle@redhat.com>
2133 * i860-dis.c: New file.
2134 (print_insn_i860): New function.
2135 (print_br_address): New function.
2136 (sign_extend): New function.
2137 (BITWISE_OP): New macro.
2138 (I860_REG_PREFIX): New macro.
2139 (grnames, frnames, crnames): New structures.
2141 * disassemble.c (ARCH_i860): Define.
2142 (disassembler): Add check for bfd_arch_i860 to set disassemble
2143 function to print_insn_i860.
2145 * Makefile.in (CFILES): Added i860-dis.c.
2146 (ALL_MACHINES): Added i860-dis.lo.
2147 (i860-dis.lo): New dependences.
2149 * configure.in: New bits for bfd_i860_arch.
2151 * configure: Regenerated.
2153 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2155 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2156 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2157 (cris-dis.lo, cris-opc.lo): New rules.
2158 * Makefile.in: Rebuild.
2159 * configure.in (bfd_cris_arch): New target.
2160 * configure: Rebuild.
2161 * disassemble.c (ARCH_cris): Define.
2162 (disassembler): Support ARCH_cris.
2163 * cris-dis.c, cris-opc.c: New files.
2164 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2166 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2168 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2169 Reported by Bill Clarke <llib@computer.org>.
2171 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2173 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2174 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2176 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2178 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2179 fput_const, extract_3, extract_5_load, extract_5_store,
2180 extract_5r_store, extract_5R_store, extract_10U_store,
2181 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2182 extract_12, extract_17, extract_22): Prototype.
2183 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2184 shadowing outer block.
2187 2000-07-05 DJ Delorie <dj@redhat.com>
2191 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2193 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2195 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2197 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2198 marked for translation (exception from the usual coding style).
2199 (print_insn_avr): Initialize insn2 to avoid warnings.
2201 2000-07-03 Kazu Hirata <kazu@hxi.com>
2203 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2204 * h8500-dis.c: Fix formatting.
2206 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2208 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2209 (CLEANFILES): Add DEPA.
2210 * Makefile.in: Regenerate.
2212 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2214 * arm-dis.c (regnames): Add an additional register set to match
2215 the set used by GCC. Make it the default.
2217 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2219 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2221 * Makefile.in: Regenerate.
2223 2000-06-20 H.J. Lu <hjl@gnu.org>
2225 * Makefile.am: Rebuild dependency.
2226 * Makefile.in: Rebuild.
2228 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2230 * Makefile.in, configure: regenerate
2231 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2233 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2235 * configure.in: Recognize m68hc12 and m68hc11.
2236 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2237 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2238 and opcode generation for m68hc11 and m68hc12.
2240 2000-06-16 Nick Duffek <nsd@redhat.com>
2242 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2243 bfd_mach_ppc_620 instead of 620.
2245 2000-06-12 Kazu Hirata <kazu@hxi.com>
2247 * h8300-dis.c: Fix formatting.
2248 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2251 2000-06-09 Denis Chertykov <denisc@overta.ru>
2253 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2255 2000-06-07 Denis Chertykov <denisc@overta.ru>
2257 * avr-dis.c: completely rewritten.
2259 2000-06-02 Kazu Hirata <kazu@hxi.com>
2261 * h8300-dis.c: Follow the GNU coding style.
2262 (bfd_h8_disassemble) Fix a typo.
2264 2000-06-01 Kazu Hirata <kazu@hxi.com>
2266 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2267 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2268 correctly. Fix a typo.
2270 2000-05-31 Nick Clifton <nickc@redhat.com>
2272 * opintl.h (_(String)): Explain why dgettext is used instead of
2275 2000-05-30 Nick Clifton <nickc@redhat.com>
2277 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2278 bindtextdomain): Replace defines with those from intl/libgettext.h
2279 to quieten gcc warnings.
2281 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2283 * Makefile.am: Update dependencies with "make dep-am"
2284 * Makefile.in: Regenerate.
2286 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2288 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2289 sign-extending operands.
2291 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2293 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2296 2000-05-21 Nick Clifton <nickc@redhat.com>
2298 * Makefile.am (LIBIBERTY): Define.
2300 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2302 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2303 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2304 (reg_names): Rename to std_reg_names. Change it to a char **
2306 (std_reg_names): New name for reg_names.
2307 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2310 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2312 * fr30-desc.h: Partially regenerated to account for changed
2313 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2314 * m32r-desc.h: Ditto.
2316 2000-05-15 Nick Clifton <nickc@redhat.com>
2318 * arm-opc.h: Use upper case for flasg in MSR and MRS
2319 instructions. Allow any bit to be set in the field_mask of
2320 the MSR instruction.
2322 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2323 field_mask of an MSR instruction.
2325 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2327 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2328 instructions changed to ldrsb/ldrsh.
2330 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2332 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2333 target addresses for 'jal' and 'j'.
2335 2000-05-10 Geoff Keating <geoffk@redhat.com>
2337 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2338 also available in common mode when powerpc syntax is being used.
2340 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2342 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2343 (dummy_print_address): Ditto.
2345 2000-05-04 Timothy Wall <twall@redhat.com>
2347 * tic54x-opc.c: New.
2348 * tic54x-dis.c: New.
2349 * disassemble.c (disassembler): Add ARCH_tic54x.
2350 * configure.in: Added tic54x target.
2352 * Makefile.am: Add tic54x dependencies.
2353 * Makefile.in: Ditto.
2355 2000-05-03 J.T. Conklin <jtc@redback.com>
2357 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2358 vector unit operands.
2359 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2360 unit instruction formats.
2361 (PPCVEC): New macro, mask for vector instructions.
2362 (powerpc_operands): Add table entries for above operand types.
2363 (powerpc_opcodes): Add table entries for vector instructions.
2365 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2366 (print_insn_little_powerpc): Likewise.
2367 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2369 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2371 * configure.in: Add bfd_powerpc_64_arch.
2372 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2375 2000-04-24 Nick Clifton <nickc@redhat.com>
2377 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2380 2000-04-23 Denis Chertykov <denisc@overta.ru>
2382 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2384 (reg_fmul_r): New. Extract source register from FMUL instruction.
2385 (reg_muls_d): New. Extract destination register from MULS instruction.
2386 (reg_muls_r): New. Extract source register from MULS instruction.
2387 (reg_movw_d): New. Extract destination register from MOVW instruction.
2388 (reg_movw_r): New. Extract source register from MOVW instruction.
2389 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2390 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2392 2000-04-22 Timothy Wall <twall@redhat.com>
2394 * ia64-gen.c (general): Add an ordered table of primary
2395 opcode names, as well as priority fields to disassembly data
2396 structures to enforce a preferred disassembly format based on the
2397 ordering of the opcode tables.
2398 (load_insn_classes): Show a useful message if IC tables are missing.
2399 (load_depfile): Ditto.
2400 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2401 distinguish preferred disassembly.
2402 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2403 format. Fix incorrect flag on fma.s/fma.s.s0.
2404 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2405 the highest priority.
2406 * ia64-opc-b.c: Use more abbreviations.
2407 * ia64-asmtab.c: Regenerate.
2409 2000-04-21 Jason Eckhardt <jle@redhat.com>
2411 * hppa-dis.c (extract_16): New function.
2412 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2413 new operand types l,y,&,fe,fE,fx.
2415 2000-04-21 Richard Henderson <rth@redhat.com>
2416 David Mosberger <davidm@hpl.hp.com>
2417 Timothy Wall <twall@redhat.com>
2418 Bob Manson <manson@charmed.cygnus.com>
2419 Jim Wilson <wilson@redhat.com>
2421 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2422 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2423 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2425 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2426 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2427 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2428 * Makefile.in: Rebuild.
2429 * configure Rebuild.
2430 * configure.in (bfd_ia64_arch): New target.
2431 * disassemble.c (ARCH_ia64): Define.
2432 (disassembler): Support ARCH_ia64.
2433 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2434 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2435 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2436 ia64-war.tbl, ia64-waw.tbl: New files.
2438 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2440 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2441 (disassemble): Use them.
2443 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2445 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2446 * Makefile.am: Update dependencies.
2447 * Makefile.in: Regenerate.
2449 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2451 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2452 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2453 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2454 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2455 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2456 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2457 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2458 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2459 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2460 ansidecl.h as sysdep.h includes it.
2462 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2464 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2465 --enable-build-warnings option.
2466 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2467 * Makefile.in, configure: Re-generate.
2469 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2471 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2472 stc GBR,@-<REG_N> is available for arch_sh1_up.
2473 Group parallel processing insn with identical mnemonics together.
2474 Make three-operand psha / pshl come first.
2476 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2478 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2479 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2480 (sh_arg_type): Add A_PC.
2481 (sh_table): Update entries using immediates. Add repeat.
2482 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2483 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2485 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2487 * po/opcodes.pot: Regenerate.
2489 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2490 (DEP): Quote when passing vars to sub-make. Add warning message
2492 (DEP1): Rewrite for "gcc -MM".
2493 (CLEANFILES): Add DEP2.
2494 Update dependencies.
2495 * Makefile.in: Regenerate.
2497 2000-04-03 Denis Chertykov <denisc@overta.ru>
2499 * avr-dis.c: Syntax cleanup.
2500 (add0fff): Print the pc relative address as a signed number.
2501 (add03f8): Likewise.
2503 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2505 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2506 the parameter ATTRIBUTE_UNUSED.
2507 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2509 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2511 * m10300-opc.c: SP-based offsets are always unsigned.
2513 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2515 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2516 [branch always] instead of "undefined".
2518 2000-03-27 Nick Clifton <nickc@redhat.com>
2520 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2521 short instructions, from end of list of long instructions.
2523 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2525 * Makefile.am (CFILES): Add avr-dis.c.
2526 (ALL_MACHINES): Add avr-dis.lo.
2528 2000-03-27 Alan Modra <alan@linuxcare.com>
2530 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2532 (print_insn_avr): Call function via pointer in K&R compatible way.
2533 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2534 add0fff, add03f8): Convert to old style function declaration and
2536 (avrdis_opcode): Add prototype.
2538 2000-03-27 Denis Chertykov <denisc@overta.ru>
2540 * avr-dis.c: New file. AVR disassembler.
2541 * configure.in (bfd_avr_arch): New architecture support.
2542 * disassemble.c: Likewise.
2543 * configure: Regenerate.
2545 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2547 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2549 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2551 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2552 flag to determine if operand is pc-relative.
2554 (d30v_format_table):
2555 (REL6S3): Renamed from IMM6S3.
2556 Added flag OPERAND_PCREL.
2557 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2558 added flag OPERAND_PCREL.
2559 (IMM12S3U): Replaced with REL12S3.
2560 (SHORT_D2, LONG_D): Delay target is pc-relative.
2561 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2562 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2563 using the REL* operands.
2564 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2565 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2566 LONG_Db, using REL* operands.
2567 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2568 (d30v_opcode_table): Use new *r formats.
2570 2000-02-28 Nick Clifton <nickc@redhat.com>
2572 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2573 'signed_overflow_ok_p'.
2575 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2577 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2578 name of the libtool directory.
2579 * Makefile.in: Rebuild.
2581 2000-02-24 Nick Clifton <nickc@redhat.com>
2583 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2584 (cgen_clear_signed_overflow_ok): New function.
2585 (cgen_signed_overflow_ok_p): New function.
2587 2000-02-23 Andrew Haley <aph@redhat.com>
2589 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2590 m32r-ibld.c, m32r-opc.h: Rebuild.
2592 2000-02-23 Linas Vepstas <linas@linas.org>
2594 * i370-dis.c, i370-opc.c: New.
2596 * disassemble.c (ARCH_i370): Define.
2597 (disassembler): Handle it.
2599 * Makefile.am: Add support for Linux/IBM 370.
2600 * configure.in: Likewise.
2602 * Makefile.in: Regenerate.
2603 * configure: Likewise.
2605 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2607 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2608 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2611 2000-02-22 Andrew Haley <aph@redhat.com>
2613 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2615 * mips-opc.c (G6): New define.
2616 (mips_builtin_op): Add "move" definition for -gp32.
2618 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2620 From Grant Erickson <gerickso@Brocade.COM>:
2621 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2623 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2625 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2628 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2630 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2631 (print_insn_ppi): Likewise.
2632 (print_insn_shx): Use info->mach to select appropriate insn set.
2633 Add support for sh-dsp. Remove FD_REG_N support.
2634 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2635 (sh_arg_type): Likewise. Remove FD_REG_N.
2636 (sh_dsp_reg_nums): New enum.
2637 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2638 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2639 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2640 (arch_sh3_dsp_up): Likewise.
2641 (sh_opcode_info): New field: arch.
2642 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2643 D_REG_N. Fill in arch field. Add sh-dsp insns.
2645 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2647 * arm-dis.c: Change flavor name from atpcs-special to
2648 special-atpcs to prevent name conflict in gdb.
2649 (get_arm_regname_num_options, set_arm_regname_option,
2650 get_arm_regnames): New functions. API to access the several
2651 flavor of register names. Note: Used by gdb.
2652 (print_insn_thumb): Use the register name entry from the currently
2653 selected flavor for LR and PC.
2655 2000-02-10 Nick Clifton <nickc@redhat.com>
2657 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2659 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2660 "mulsh.h" instructions.
2661 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2663 (print_insn_mcore): Add support for little endian targets.
2664 Add support for MULSH and OPSR classes.
2666 2000-02-07 Nick Clifton <nickc@redhat.com>
2668 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2669 Previous delat did not take.
2671 2000-02-03 Timothy Wall <twall@redhat.com>
2673 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2674 to adjust target address bounds checking and calculate the
2675 appropriate octet offset into data.
2677 2000-01-27 Nick Clifton <nickc@redhat.com>
2679 * arm-dis.c: (parse_disassembler_option): Rename to
2680 parse_arm_disassembler_option and allow to be exported.
2682 * disassemble.c (disassembler_usage): New function: Print out any
2683 target specific disassembler options.
2684 Call arm_disassembler_options() if the ARM architecture is being
2687 * arm-dis.c (NUM_ELEM): Define this macro if not already
2689 (arm_regname): New struct type for ARM register names.
2690 (arm_toggle_regnames): Delete.
2691 (parse_disassembler_option): Use register name structure.
2692 (print_insn): New function: Combines duplicate code found in
2693 print_insn_big_arm and print_insn_little_arm.
2694 (print_insn_big_arm): Call print_insn.
2695 (print_insn_little_arm): Call print_insn.
2696 (print_arm_disassembler_options): Display list of supported,
2697 ARM specific disassembler options.
2699 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2701 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2702 ARM_STT_16BIT flag as Thumb code symbols.
2704 * arm-dis.c (printf_insn_little_arm): Ditto.
2706 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2708 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2709 of raw thumb instructions.
2711 2000-01-20 Nick Clifton <nickc@redhat.com>
2713 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2715 2000-01-03 Nick Clifton <nickc@cygnus.com>
2717 * arm-dis.c (streq): New macro.
2718 (strneq): New macro.
2719 (force_thumb): ew local variable.
2720 (parse_disassembler_option): New function: Parse a single, ARM
2721 specific disassembler command line switch.
2722 (parse_disassembler_option): Call parse_disassembler_option to
2723 parse individual command line switches.
2724 (print_insn_big_arm): Check force_thumb.
2725 (print_insn_little_arm): Check force_thumb.
2727 For older changes see ChangeLog-9899
2733 version-control: never