1 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (OP_E_extended): Removed.
5 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
7 * i386-dis.c (print_insn): Check rex_ignored.
9 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
11 * i386-dis.c (ckprefix): Updated to return 0 if number of
12 prefixes > 14 and record the last position for each prefix.
13 (lock_prefix): Removed.
14 (data_prefix): Likewise.
15 (addr_prefix): Likewise.
16 (repz_prefix): Likewise.
17 (repnz_prefix): Likewise.
18 (last_lock_prefix): New.
19 (last_repz_prefix): Likewise.
20 (last_repnz_prefix): Likewise.
21 (last_data_prefix): Likewise.
22 (last_addr_prefix): Likewise.
23 (last_rex_prefix): Likewise.
24 (last_seg_prefix): Likewise.
25 (MAX_CODE_LENGTH): Likewise.
26 (ADDR16_PREFIX): Likewise.
27 (ADDR32_PREFIX): Likewise.
28 (DATA16_PREFIX): Likewise.
29 (DATA32_PREFIX): Likewise.
30 (REP_PREFIX): Likewise.
31 (seg_prefix): Likewise.
32 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
33 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
34 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
35 (get_valid_dis386): Updated.
37 (OP_Monitor): Likewise.
38 (REP_Fixup): Likewise.
39 (print_insn): Display all prefixes.
40 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
41 (intel_operand_size): Likewise.
42 (OP_E_register): Likewise.
49 (CRC32_Fixup): Likewise.
50 (MOVBE_Fixup): Likewise.
51 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
53 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
54 used_prefixes only if it is used.
56 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
58 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
59 or, sbb, sub, xor and xchg with register only operands.
60 * i386-tbl.h: Regenerated.
62 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
64 * i386-gen.c (opcode_modifiers): Add IsLockable.
66 * i386-opc.h (IsLockable): New.
67 (i386_opcode_modifier): Add islockable.
69 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
70 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
72 * i386-tbl.h: Regenerated.
74 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
76 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
77 generic coprocessor instructions for FPA loads and stores.
78 (print_insn_coprocessor): Remove %C support. Display address for
79 PC-relative offsets in %A.
81 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
83 * i386-dis.c (all_prefixes): New.
84 (ckprefix): Set all_prefixes.
85 (print_insn): Print all_prefixes instead of lock_prefix,
86 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
88 2009-11-11 Nick Clifton <nickc@redhat.com>
91 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
92 (print_insn_arm): Extend %s format control code to check for
93 unpredictable addressing modes. Add support for %S format control
94 code which suppresses this check.
95 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
96 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
97 PRE_BIT_SET): New macros.
98 (print_insn_coprocessor): Use the new macros instead of magic
100 (print_arm_address): Likewise.
101 (pirnt_insn_arm): Likewise.
102 (print_insn_thumb32): Likewise.
104 2009-11-11 Nick Clifton <nickc@redhat.com>
106 * po/id.po: Updated Indonesian translation.
108 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
110 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
112 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
114 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
115 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
116 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
118 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
121 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
122 Quentin Neill <quentin.neill@amd.com>
124 * opcodes/i386-dis.c (OP_LWPCB_E): New.
127 (USE_XOP_8F_TABLE): New.
129 (REG_XOP_LWPCB): New.
133 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
134 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
136 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
137 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
138 to access to the vex_table.
142 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
143 (cpu_flags): Add CpuLWP.
144 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
145 * opcodes/i386-opc.h (CpuLWP): New.
146 (i386_cpu_flags): Add bit cpulwp.
150 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
151 * opcodes/i386-opc.tbl (llwpcb): Added.
155 2009-11-04 DJ Delorie <dj@redhat.com>
157 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
158 (mvtcp, mvfcp, opecp): Remove.
159 * rx-decode.c: Regenerate.
160 * rx-dis.c (cpen): Remove.
162 2009-11-03 Doug Evans <dje@sebabeach.org>
164 * m32c-desc.c: Regenerate.
165 * mep-desc.c: Regenerate.
167 2009-11-02 Paul Brook <paul@codesourcery.com>
169 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
170 Add VFPv4 instructions.
172 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
174 * i386-dis.c (OP_VEX_FMA): Removed.
176 (Vex128FMA): Removed.
177 (prefix_table): First source operand of FMA4 insns is decoded
178 with Vex not with VexFMA.
179 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
180 when vex.w is set. Third source operand is decoded with
182 2009-10-27 Alan Modra <amodra@bigpond.net.au>
184 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
185 * Makefile.in: Regenerate.
186 * po/POTFILES.in: Regenerate.
188 2009-10-23 Doug Evans <dje@sebabeach.org>
190 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
191 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
192 * cgen-bitset.c: Update.
193 * fr30-desc.h: Regenerate.
194 * frv-desc.h: Regenerate.
195 * ip2k-desc.h: Regenerate.
196 * iq2000-desc.h: Regenerate.
197 * lm32-desc.h: Regenerate.
198 * m32c-desc.h: Regenerate.
199 * m32c-opc.h: Regenerate.
200 * m32r-desc.h: Regenerate.
201 * mep-desc.h: Regenerate.
202 * mt-desc.h: Regenerate.
203 * openrisc-desc.h: Regenerate.
204 * xc16x-desc.h: Regenerate.
205 * xstormy16-desc.h: Regenerate.
207 2009-10-22 DJ Delorie <dj@redhat.com>
209 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
210 * rx-decode.c: Regenerated.
212 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
215 * i386-dis.c: Document LB, LS and LV macros.
216 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
217 with the 64-bit displacement or immediate operand.
218 (putop): Handle LB, LS and LV macros.
220 2009-10-18 Doug Evans <dje@sebabeach.org>
222 * lm32-opinst.c: Regenerate.
223 * m32c-desc.c: Regenerate.
224 * m32r-opinst.c: Regenerate.
225 * openrisc-ibld.c: Regenerate.
226 * xc16x-desc.c: Regenerate.
227 * xc16x-desc.h: Regenerate.
229 2009-10-17 Doug Evans <dje@sebabeach.org>
231 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
232 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
233 sorted alphabetically.
234 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
235 stamp-* rules are sorted alphabetically.
236 * Makefile.in: Regenerate.
238 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
240 * i386-opc.h: Use enum instead of nested macros.
242 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
244 * i386-dis.c: Simplify enums.
246 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
247 Ineiev <ineiev@gmail.com>
250 * i386-dis.c: Use enum instead of nested macros.
252 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
254 * i386-dis.c (MAX_BYTEMODE): Removed.
256 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
259 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
261 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
263 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
266 2009-10-07 Michael Eager <eager@eagercon.com>
268 * microblaze-dis.c: Add include for microblaze-dis.h,
269 eliminate local extern decls.
270 * microblaze-dis.h: New.
272 2009-10-06 Nick Clifton <nickc@redhat.com>
274 * po/fi.po: Updated Finnish translation.
276 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
278 * opc2c.c: Include "libiberty.h" and <errno.h>.
279 (orig_filename): Constify.
280 (dump_lines): Fix line number directive.
281 (main): Set orig_filename to basename of input file. Use
284 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
285 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
286 instead of $(EXEEXT).
287 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
288 $(LINK_FOR_BUILD). Link with libiberty.
289 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
290 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
291 * Makefile.in: Regenerated.
292 * rx-decode.c: Regenerated.
294 2009-10-03 Paul Reed <paulreed@paddedcell.com>
296 * arm-dis.c (print_insn): Check symtab_size not *symtab.
298 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
300 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
301 * i386-tbl.h: Regenerated.
303 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
305 * ppc-dis.c (ppc_opts): Add "476" entry.
306 * ppc-opc.c (PPC476): Define.
307 (powerpc_opcodes): Update mnemonics where required for 476.
309 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
311 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
312 * ppc-dis.c (ppc_opts): Likewise.
313 Rename "ppca2" to "a2".
315 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
317 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
319 2009-09-29 DJ Delorie <dj@redhat.com>
321 * Makefile.am: Add RX files.
322 * configure.in: Add support for RX target.
323 * disassemble.c: Likewise.
324 * Makefile.in: Regenerate.
325 * configure: Regenerate.
327 * rx-decode.c: New file.
328 * rx-decode.opc: New file.
329 * rx-dis.c: New file.
331 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
333 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
334 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
336 2009-09-25 Michael Eager <eager@eagercon.com>
338 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
339 microblaze_decode_insn): Add declarations.
340 (get_delay_slots_microblaze): Remove.
342 2009-09-25 Martin Thuresson <martint@google.com>
344 Update sources to make arc and arm targets compile cleanly with
346 * arc-dis.c Fix casts.
347 * arc-ext.c: Add casts.
348 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
351 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
353 * i386-gen.c (opcode_modifiers): Remove Vex256.
354 (set_bitfield): Handle XXX=V.
356 * i386-opc.h (Vex): Update comments.
359 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
361 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
362 * i386-tbl.h: Regenerated.
364 2009-09-23 Nick Clifton <nickc@redhat.com>
366 * po/fr.po: Updated French translation.
368 2009-09-21 Ben Elliston <bje@au.ibm.com>
369 Peter Bergner <bergner@vnet.ibm.com>
371 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
372 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
373 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
374 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
376 (ERAT_T): New operand.
377 (XWC_MASK): New mask.
381 2009-09-18 Nick Clifton <nickc@redhat.com>
383 * po/es.po: Updated Spanish translation.
384 * po/vi.po: Updated Vietnamese translation.
386 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
388 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
391 2009-09-14 Nick Clifton <nickc@redhat.com>
393 * po/nl.po: Updated Dutch translation.
395 2009-09-11 Nick Clifton <nickc@redhat.com>
397 * po/opcodes.pot: Updated by the Translation project.
399 2009-09-11 Martin Thuresson <martint@google.com>
401 Updated sources to compile cleanly with -Wc++-compat:
402 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
403 * ldcref.c: Add casts.
404 * ldctor.c: Add casts.
406 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
407 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
408 * ldlang.h (enum statement_enum): Move to top level.
409 * ldmain.c: Add casts.
410 * ldwrite.c: Add casts.
411 * lexsup.c: Add casts. (enum control_enum): Move to top level.
412 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
414 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
416 * s390-dis.c (print_insn_s390): Avoid 'long long'.
418 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
420 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
421 (print_insn_s390): Signextend and shift pcrel operands before printing.
423 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
425 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
426 VEX_LEN_AE_R_X_M_0 in comments.
428 2009-09-08 DJ Delorie <dj@redhat.com>
430 * mep-opc.c: Regenerate.
432 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
434 * z8kgen.c (struct op): Replace unused flavor with id.
435 (opt): Remove extra xorb entry.
436 (func): Use id field as fallback.
437 (sub): Return new string, caller changed.
438 (internal): Allocate end marker. Assign unique id before sorting.
439 (gas): Likewise. Fix loop end condition.
440 * z8k-opc.h: Regenerate.
442 2009-09-08 Alan Modra <amodra@bigpond.net.au>
444 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
446 2009-09-07 Alan Modra <amodra@bigpond.net.au>
448 * z8kgen.c (func): Fix thinko last patch.
450 2009-09-07 Alan Modra <amodra@bigpond.net.au>
452 * z8kgen.c (func): Stabilize qsort of identically named entries.
453 * z8k-opc.h: Regenerate.
455 2009-09-07 Tristan Gingold <gingold@adacore.com>
457 * po/opcodes.pot: Regenerate.
459 2009-09-07 Alan Modra <amodra@bigpond.net.au>
461 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
462 * configure: Regenerate.
463 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
464 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
465 (i386-gen, ia64-gen, z8kgen): ..here.
466 * Makefile.in: Regenerate.
468 2009-09-07 Tristan Gingold <gingold@adacore.com>
470 * z8k-opc.h: Regenerate.
472 2009-09-05 Martin Thuresson <martin@mtme.org>
474 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
475 * m88k-dis.c (m88kdis): Rename variable class to in_class.
476 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
477 Rename argument class to symbol_class.
479 2009-09-04 Jie Zhang <jie.zhang@analog.com>
481 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
482 to the new encoding of DBGA, DBGAH, and DBGAL.
483 (_print_insn_bfin): Likewise.
485 2009-09-03 Jie Zhang <jie.zhang@analog.com>
487 * bfin-dis.c (_print_insn_bfin): Don't declare.
488 (print_insn_bfin): Don't declare.
489 (dregs_pair): Remove.
490 (ignore_bits): Remove.
493 2009-09-03 Jie Zhang <jie.zhang@analog.com>
495 * bfin-dis.c (IS_DREG): Define.
501 (decode_REGMV_0): Check illegal register move instructions.
503 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
505 * Makefile.am (BUILD_LIBINTL): New variable.
506 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
507 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
508 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
509 * Makefile.in: Regenerate.
511 2009-09-01 DJ Delorie <dj@redhat.com>
513 * mep-asm.c: Regenerate.
514 * mep-desc.c: Regenerate.
515 * mep-opc.c: Regenerate.
517 2009-09-01 Tristan Gingold <gingold@adacore.com>
519 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
520 dependencies. Remove unused FORMAT variable.
521 * configure.com: New file to create build.com DCL script for
522 Itanium VMS or Alpha VMS.
524 2009-08-29 Martin Thuresson <martin@mtme.org>
526 * cris-dis.c (bytes_to_skip): Update code to use new name.
527 * i386-dis.c (putop): Update code to use new name.
528 * i386-gen.c (process_i386_opcodes): Update code to use
530 * i386-opc.h (struct template): Rename struct template to
531 insn_template. Update code accordingly.
532 * i386-tbl.h (i386_optab): Update type to use new name.
533 * ia64-dis.c (print_insn_ia64): Rename variable template
535 * tic30-dis.c (struct instruction, get_tic30_instruction):
536 Update code to use new name.
537 * tic54x-dis.c (has_lkaddr, get_insn_size)
538 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
539 Update code to use new name.
540 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
541 Update type to new name.
542 * z8kgen.c (internal, gas): Rename variable new to new_op.
544 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
546 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
547 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
548 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
549 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
550 * Makefile.in: Regenerated.
552 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
554 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
555 [INSTALL_LIBBFD]: ... here, ...
556 [INSTALL_LIBBFD]: ... and empty overrides here.
557 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
558 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
559 * Makefile.in: Regenerate.
560 * configure: Regenerate.
562 2009-08-26 Philippe De Muyter <phdm@macqel.be>
564 * m68k-dis.c (print_insn_arg): Add movecr register names for
565 coldfire v4e families.
567 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
569 * Makefile.am (SUBDIRS): Build '.' before 'po'.
570 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
571 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
572 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
573 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
574 (i386-gen.o): New rule.
575 ($(srcdir)/i386-init.h): Adjust.
576 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
577 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
578 (ia64-gen.o): New rule.
579 (ia64_asmtab_deps): New variable.
580 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
581 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
582 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
584 (s390-opc.tab): Adjust.
585 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
587 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
588 * Makefile.in: Regenerate.
589 * z8kgen.c (gas): Avoid '/*' in comment.
590 * z8k-opc.h (func): Regenerate.
592 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
594 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
595 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
596 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
597 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
599 (LIBOPCODES_CFILES): New variable, adding to
600 TARGET_LIBOPCODES_CFILES also non-target library sources.
601 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
603 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
604 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
605 * Makefile.in: Regenerate.
606 * po/POTFILES.in: Regenerate.
608 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
610 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
611 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
612 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
613 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
614 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
615 is built shared even if it is not to be installed.
616 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
617 (install_libopcodes, uninstall_libopcodes): Remove.
618 (AM_CPPFLAGS): Renamed from ...
619 (INCLUDES): ... this.
620 * Makefile.in: Regenerate.
622 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
623 1.11, foreign, no-dist.
624 (MKDEP, m32c_opc_h): Remove variables.
625 (disassemble.lo): Rewrite using automake-style dependency
626 tracking rules; only list the dependency upon the primary source
627 file, but no included headers.
628 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
629 (i386-gen.o, ia64-gen.o): Remove dependency statements.
630 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
631 ensure all dependency fragments are included in the Makefile.
632 (s390-opc.lo): Depend on s390-opc.tab.
633 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
634 (mkdep section): Remove.
635 * Makefile.in: Regenerate.
636 * po/POTFILES.in: Regenerate.
638 * Makefile.am (install-pdf, install-html): Remove.
639 * Makefile.in: Regenerate.
641 * Makefile.in: Regenerate.
642 * aclocal.m4: Likewise.
643 * config.in: Likewise.
644 * configure: Likewise.
646 2009-08-06 Michael Eager <eager@eagercon.com>
648 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
649 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
650 * Makefile.in: Regenerate.
651 * configure.in: Add bfd_microblaze_arch target.
652 * configure: Regenerate.
653 * disassemble.c: Define ARCH_microblaze, return
654 print_insn_microblaze().
655 * microblaze-dis.c: New MicroBlaze disassembler.
656 * microblaze-opc.h: New MicroBlaze opcode definitions.
657 * microblaze-opcm.h: New MicroBlaze opcode types.
659 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
661 * configure.in: Handle bfd_l1om_arch.
662 * disassemble.c (disassembler): Likewise.
664 * configure: Regenerated.
666 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
667 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
669 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
671 (cpu_flags): Add CpuL1OM.
672 (set_bitfield): Take an argument to set the value field.
673 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
674 (process_i386_opcode_modifier): Updated.
675 (process_i386_operand_type): Likewise.
676 * i386-init.h: Regenerated.
677 * i386-tbl.h: Likewise.
679 * i386-opc.h (CpuL1OM): New.
681 (i386_cpu_flags): Add cpul1om.
683 2009-07-24 Jan Beulich <jbeulich@novell.com>
685 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
687 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
688 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
689 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
690 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
692 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
694 * i386-opc.tbl: Qualify floating point instructions by their
695 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
696 and fsincos to be avilable only on 387. Fix fstsw ax to be
697 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
699 * i386-init.h, i386-tbl.h: Regenerate.
701 2009-07-20 Nick Clifton <nickc@redhat.com>
704 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
705 offset or indexed based addressing mode 3.
707 2009-07-14 Nick Clifton <nickc@redhat.com>
710 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
712 (arm_decode_shift): Catch illegal register based shifts.
713 (print_insn_arm): Properly handle negative register r0
714 post-indexed addressing.
716 2009-07-10 Doug Kwan <dougkwan@google.com>
718 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
719 lower 32 bits of long types to make hexadecimal output consistent
720 on both 32-bit and 64-bit hosts.
722 2009-07-10 Alan Modra <amodra@bigpond.net.au>
724 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
725 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
726 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
727 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
728 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
729 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
730 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
731 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
732 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
733 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
734 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
735 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
737 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
739 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
741 2009-07-07 Nick Clifton <nickc@redhat.com>
744 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
747 2009-07-06 DJ Delorie <dj@redhat.com>
749 * mep-desc.c: Regenerate.
750 * mep-desc.h: Regenerate.
751 * mep-opc.c: Regenerate.
752 * mep-opc.h: Regenerate.
754 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
756 * i386-opc.h (CpuFMA4): Add CpuFMA4.
757 (i386_cpu_flags): New.
758 * i386-gen.c: Add CPU_FMA4_FLAGS.
759 * i386-opc.tbl: Add FMA4 instructions.
760 * i386-tbl.h: Regenerate.
761 * i386-init.h: Regenerate.
762 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
763 (OP_XMM_VexW): Ditto.
765 (VEXI4_Fixup): Ditto.
766 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
767 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
768 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
769 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
770 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
771 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
772 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
773 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
774 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
775 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
776 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
777 (get_vex_imm8): New. handle FMA4.
778 (OP_EX_VexReg): Ditto.
780 2009-06-30 Nick Clifton <nickc@redhat.com>
783 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
784 LFM and SFM instructions as comments,.
785 Improve consistency of formatting for instructions displayed as
786 comments and decimal values displayed with their hexadecimal
790 2009-06-29 Nick Clifton <nickc@redhat.com>
793 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
794 boundary between variaant and generic coprocessor instuctions.
795 (coprocessor): Use it.
796 Fix architecture version of MCRR and MRRC instructions.
797 (arm_opcdes): Fix patterns for STRB and STRH instructions.
798 (print_insn_coprocessor): Check architecture and extension masks.
799 Print a hexadecimal version of any decimal constant that is
800 outside of the range of -16 to +32.
801 (print_arm_address): Add a return value of the offset used in the
802 adress, if it is worth printing a hexadecimal version of it.
803 (print_insn_neon): Print a hexadecimal version of any decimal
804 constant that is outside of the range of -16 to +32.
805 (print_insn_arm): Likewise.
806 (print_insn_thumb16): Likewise.
807 (print_insn_thumb32): Likewise.
810 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
811 of an undefined instruction.
812 (arm_opcodes): Use it.
813 (thumb_opcod): Use it.
814 (thumb32_opc): Use it.
816 2009-06-23 DJ Delorie <dj@redhat.com>
818 * mep-desc.c: Regenerate.
819 * mep-desc.h: Regenerate.
820 * mep-dis.c: Regenerate.
821 * mep-ibld.c: Regenerate.
822 * mep-opc.c: Regenerate.
824 * mep-asm.c: Regenerate.
825 * mep-opc.c: Regenerate.
826 * mep-opc.h: Regenerate.
828 2009-06-22 Nick Clifton <nickc@redhat.com>
830 * po/fi.po: Updated Finish translation.
832 2009-06-22 Alan Modra <amodra@bigpond.net.au>
834 * m32c-asm.c: Regenerate.
836 2009-06-22 Alan Modra <amodra@bigpond.net.au>
838 * score-dis.c (print_insn_score48, print_insn_score32): Move default
839 case label to proper lexical block.
840 * score7-dis.c (print_insn_score32): Likewise.
842 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
844 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
845 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
846 * s390-opc.txt (nopr, nop): Use new instruction format.
848 2009-06-18 Nick Clifton <nickc@redhat.com>
851 * arm-dis.c (print_insn_coprocessor): Check that a user specified
852 ARM architecture supports the matched instruction.
853 (print_insn_arm): Likewise.
854 (select_arm_features): New function. Fills in the fields of an
855 arm_feature_set structure based on a given arm machine number.
856 (print_insn): Initialise an arm_feature_set structure.
858 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
860 * vax-dis.c (is_function_entry): Return success for synthetic
862 (is_plt_tail): New function.
863 (print_insn_vax): Decode PLT entry offset longword.
865 2009-06-15 Nick Clifton <nickc@redhat.com>
868 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
872 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
874 2009-06-15 Nick Clifton <nickc@redhat.com>
877 * arm-dis.c (print_insn): Ignore is_data if the user has requested
878 the disassembly of data as well as instructions.
880 2009-06-11 Doug Evans <dje@sebabeach.org>
882 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
884 2009-06-11 Anthony Green <green@moxielogic.com>
886 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
887 (moxie_form3_opc_info): Add branch instructions.
888 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
889 encoded instructions.
891 2009-06-06 Anthony Green <green@moxielogic.com>
893 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
894 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
896 2009-06-04 Alan Modra <amodra@bigpond.net.au>
898 * dep-in.sed: Don't use \n in replacement part of s command.
899 * Makefile.am (DEP1): LC_ALL for uniq.
900 * Makefile.in: Regenerate.
902 2009-06-02 Nick Clifton <nickc@redhat.com>
904 * po/nl.po: Updated Dutch translation.
906 2009-06-02 Tristan Gingold <gingold@adacore.com>
908 * ia64-gen.c (parse_resource_users, print_dependency_table,
909 add_dis_table_ent, finish_distable, insert_bit_table_ent,
910 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
911 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
912 insert_completer_entry, print_completer_entry, print_completer_table,
913 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
915 2009-05-28 DJ Delorie <dj@redhat.com>
917 * mep-asm.c: Regenerate.
918 * mep-desc.c: Regenerate.
920 2009-05-26 DJ Delorie <dj@redhat.com>
922 * mep-asm.c: Regenerate.
923 * mep-desc.c: Regenerate.
924 * mep-desc.h: Regenerate.
925 * mep-dis.c: Regenerate.
926 * mep-ibld.c: Regenerate.
927 * mep-opc.c: Regenerate.
928 * mep-opc.h: Regenerate.
930 2009-05-26 Nick Clifton <nickc@redhat.com>
932 * po/id.po: Updated Indonesian translation.
933 * po/opcodes.pot: Updated template file.
935 2009-05-26 Alan Modra <amodra@bigpond.net.au>
937 * dep-in.sed: Don't modify .o to .lo here. Output one filename
938 per line with all lines having continuation backslash. Prefix
939 first line with "A", following lines with "B".
940 * Makefile.am (DEP): Don't use dep.sed here.
941 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
942 dep.sed here on dependencies, sort and uniq.
943 * Makefile.in: Regenerate.
945 2009-05-25 Tristan Gingold <gingold@adacore.com>
947 * makefile.vms (OPT): New variable.
948 (CFLAGS): Update compilation flags.
950 2009-05-22 DJ Delorie <dj@redhat.com>
952 * mep-asm.c: Regenerate.
953 * mep-desc.c: Regenerate.
954 * mep-desc.h: Regenerate.
955 * mep-dis.c: Regenerate.
956 * mep-ibld.c: Regenerate.
957 * mep-opc.c: Regenerate.
958 * mep-opc.h: Regenerate.
960 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
962 * i386-opc.h (Cpusse5): Delete.
963 (i386_cpu_flags): Delete.
964 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
965 * i386-opc.tbl: Remove SSE5 instructions.
966 * i386-tbl.h: Regenerate.
967 * i386-init.h: Regenerate.
968 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
969 (print_drex_arg): Delete.
972 (OP_DREX_ICMP): Delete.
973 (OP_DREX_FCMP): Delete.
975 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
977 2009-05-22 Alan Modra <amodra@bigpond.net.au>
979 * Makefile.am: Run "make dep-am".
980 * Makefile.in: Regenerate.
981 * po/POTFILES.in: Regenerate.
983 2009-05-19 DJ Delorie <dj@redhat.com>
985 * mep-asm.c: Regenerate.
986 * mep-opc.c: Regenerate.
988 2009-04-30 DJ Delorie <dj@redhat.com>
990 * mep-asm.c: Regenerate.
991 * mep-desc.c: Regenerate.
992 * mep-desc.h: Regenerate.
993 * mep-dis.c: Regenerate.
994 * mep-ibld.c: Regenerate.
995 * mep-opc.c: Regenerate.
996 * mep-opc.h: Regenerate.
998 2009-04-17 DJ Delorie <dj@redhat.com
1000 * mep-desc.c: Regenerate.
1001 * mep-ibld.c: Regenerate.
1002 * mep-opc.c: Regenerate.
1003 * mep-opc.h: Regenerate.
1005 2009-04-15 Anthony Green <green@moxielogic.com>
1007 * moxie-opc.c, moxie-dis.c: Created.
1008 * Makefile.am: Build the moxie source files.
1009 * configure.in: Add moxie support.
1010 * Makefile.in, configure: Rebuilt.
1011 * disassemble.c (disassembler): Add moxie support.
1012 (ARCH_moxie): Define.
1014 2009-04-15 Jan Beulich <jbeulich@novell.com>
1016 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1018 (pshab, pshaw, pshad, pshaq): Likewise.
1019 * i386-tbl.h: Re-generate.
1021 2009-04-08 DJ Delorie <dj@redhat.com
1023 * mep-asm.c: Regenerate.
1024 * mep-desc.c: Regenerate.
1025 * mep-desc.h: Regenerate.
1026 * mep-dis.c: Regenerate.
1027 * mep-ibld.c: Regenerate.
1028 * mep-opc.c: Regenerate.
1029 * mep-opc.h: Regenerate.
1031 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1033 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1034 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1035 Reorder entries so the extended mnemonics are listed before tlbilx.
1037 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1039 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1041 (print_insn_powerpc): Make sure we only deprecate instructions using
1042 the original dialect and not a modified dialect due to -Many handling.
1043 Move the handling of the condition register and default operands to
1044 the end of the if/else if/else chain.
1045 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1046 instructions from newer processors are listed before older ones.
1047 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1048 that have instructions with conflicting opcodes.
1050 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1052 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1055 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1057 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1059 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1061 * arm-dis.c (print_insn): Also check section matches in backwards
1062 search for mapping symbol.
1064 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1066 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1068 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1070 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1071 * Makefile.am: Run "make dep-am".
1072 * Makefile.in: Regenerate.
1073 * openrisc-opc.c: Regenerate.
1075 2009-03-10 Nick Clifton <nickc@redhat.com>
1077 * po/id.po: Updated Indonesian translation.
1079 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1081 * ppc-dis.c: Include "opintl.h".
1082 (struct ppc_mopt, ppc_opts): New.
1083 (ppc_parse_cpu): New function.
1084 (powerpc_init_dialect): Use it.
1085 (print_ppc_disassembler_options): Dump options from ppc_opts.
1086 Internationalize message.
1088 2009-03-06 Nick Clifton <nickc@redhat.com>
1090 * po/es.po: Updated Spanish translation.
1092 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1095 * configure.in: Test for ld --as-needed support. Link shared
1096 libopcodes against libm.
1097 * configure: Regenerate.
1099 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1101 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1102 instructions from newer processors are listed before older ones.
1104 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1106 * Makefile.am: Run "make dep-am".
1107 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1109 * Makefile.in: Regenerate.
1111 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1113 * score7-dis.c: New file.
1114 * Makefile.am: Add dependencies for score7-dis.c.
1115 * Makefile.in: Regenerate.
1116 * configure.in: Add score7-dis to score files.
1117 * configure: Regenerate.
1118 * score-dis.c: Add support for score7 architecture.
1119 * score-opc.h: Likewise.
1121 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1123 * configure: Regenerate.
1125 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1127 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1129 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1131 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1132 the power7 and the isel instructions.
1133 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1134 (insert_dm, extract_dm): Likewise.
1135 (XB6): Update comment to include XX2 form.
1136 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1137 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1138 (RemoveXX3DM): Delete.
1139 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1140 "mftgpr">: Deprecate for POWER7.
1141 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1142 "frsqrte.">: Deprecate the three operand form and enable the two
1143 operand form for POWER7 and later.
1144 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1145 <"waitsrv", "waitimpl">: Add extended opcodes.
1146 <"ldbrx", "stdbrx">: Enable for POWER7.
1147 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1148 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1149 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1150 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1151 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1152 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1153 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1154 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1155 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1156 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1157 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1158 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1159 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1160 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1161 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1162 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1163 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1164 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1165 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1166 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1167 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1168 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1169 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1170 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1171 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1172 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1173 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1174 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1175 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1176 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1177 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1178 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1179 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1180 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1181 "xxspltw", "xxswapd">: Add VSX opcodes.
1183 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1185 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1186 (operand_types): Remove Vex_Imm4.
1188 * i386-opc.h (Vex_Imm4): Removed.
1190 (i386_operand_type): Remove vex_imm4.
1192 * i386-opc.tbl: Remove Vex_Imm4 comments.
1193 * i386-init.h: Regenerated.
1194 * i386-tbl.h: Likewise.
1196 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1198 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1199 vq{r}shr{u}n.s64 insnstructions.
1201 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1203 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1204 operand to be a float point register (FRT/FRS).
1206 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1208 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1209 dmfc2 and dmtc2 before the architecture-level variants.
1211 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1213 * fr30-opc.c: Regenerate.
1214 * frv-opc.c: Regenerate.
1215 * ip2k-opc.c: Regenerate.
1216 * iq2000-opc.c: Regenerate.
1217 * lm32-opc.c: Regenerate.
1218 * m32c-opc.c: Regenerate.
1219 * m32r-opc.c: Regenerate.
1220 * mep-opc.c: Regenerate.
1221 * mt-opc.c: Regenerate.
1222 * xc16x-opc.c: Regenerate.
1223 * xstormy16-opc.c: Regenerate.
1224 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1227 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1229 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1231 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1233 * ppc-opc.c: Update copyright year.
1234 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1235 ordering for POWER4 and later and use the correct Server ordering.
1237 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1239 AVX Programming Reference (January, 2009)
1240 * i386-dis.c (PREFIX_VEX_3A44): New.
1241 (VEX_LEN_3A44_P_2): Likewise.
1242 (PREFIX_VEX_3A48): Updated.
1243 (VEX_LEN_3A4C_P_2): Likewise.
1244 (prefix_table): Add PREFIX_VEX_3A44.
1245 (vex_table): Likewise.
1246 (vex_len_table): Add VEX_LEN_3A44_P_2.
1248 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1249 * i386-tbl.h: Regenerated.
1251 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1253 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1254 (mips_arch_choices): Add XLR entry.
1255 * mips-opc.c (XLR): Define.
1256 (mips_builtin_opcodes): Add XLR instructions.
1258 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1260 * Makefile.am: Add install-pdf target.
1261 * po/Make-in: Add install-pdf target.
1262 * Makefile.in: Regenerate.
1264 2009-02-02 DJ Delorie <dj@redhat.com>
1266 * mep-asm.c: Regenerate.
1267 * mep-desc.c: Regenerate.
1268 * mep-desc.h: Regenerate.
1269 * mep-dis.c: Regenerate.
1270 * mep-ibld.c: Regenerate.
1271 * mep-opc.c: Regenerate.
1272 * mep-opc.h: Regenerate.
1274 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1276 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1279 2009-01-28 Chao-ying Fu <fu@mips.com>
1281 * mips-opc.c (suxc1): Add the flag of FP_D.
1283 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1285 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1286 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1287 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1288 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1289 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1290 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1291 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1292 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1294 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1296 * configure.in (commonbfdlib): Delete.
1297 (SHARED_LIBADD): Add pic libiberty if such is available.
1298 * configure: Regenerate.
1299 * po/POTFILES.in: Regenerate.
1301 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1303 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1304 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1305 operand form and enable the four operand form for POWER6 and later.
1306 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1307 three operand form for POWER6 and later.
1309 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1311 * bfin-dis.c (OUTS): Use "%s" as format string.
1313 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1315 * i386-gen.c (cpu_flag_init): Remove a white space.
1316 (operand_type_init): Likewise.
1318 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1320 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1321 * i386-tbl.h: Regenerated.
1323 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1325 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1326 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1327 subS, xorS and cmpS.
1329 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1331 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1332 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1333 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1334 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1337 (set_bitfield): Take an argument, lineno. Don't report lineno
1338 on error if it is -1.
1339 (process_i386_cpu_flag): Take an argument, lineno.
1340 (process_i386_opcode_modifier): Likewise.
1341 (process_i386_operand_type): Likewise.
1342 (output_i386_opcode): Likewise.
1343 (opcode_hash_entry): Add lineno.
1344 (process_i386_opcodes): Updated.
1345 (process_i386_registers): Likewise.
1346 (process_i386_initializers): Likewise.
1348 * i386-opc.h (CpuP4): Removed.
1352 (CpuSYSCALL): Likewise.
1354 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1355 cpuclflush and cpusyscall.
1357 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1359 * i386-init.h: Regenerated.
1360 * i386-tbl.h: Likewise.
1362 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1364 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1365 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1366 (cpu_flags): Add CpuRdtscp.
1367 (set_bitfield): Remove CpuSledgehammer check.
1369 * i386-opc.h (CpuRdtscp): New.
1371 (i386_cpu_flags): Add cpurdtscp.
1373 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1374 * i386-init.h: Regenerated.
1375 * i386-tbl.h: Likewise.
1377 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1379 * ppc-opc.c (PPCNONE): Define.
1381 (powerpc_opcodes): Initialize the new "deprecated" field.
1383 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1385 AVX Programming Reference (December, 2008)
1386 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1387 (VEX_LEN_E7_P_2_M_0): Likewise.
1388 (VEX_LEN_2C_P_1): Updated.
1389 (VEX_LEN_E8_P_2): Likewise.
1390 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1391 (mod_table): Likewise.
1393 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1394 * i386-tbl.h: Regenerated.
1396 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1398 * i386-gen.c (process_copyright): Update for 2009.
1400 * i386-init.h: Regenerated.
1401 * i386-tbl.h: Likewise.
1403 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1405 AVX Programming Reference (December, 2008)
1406 * i386-dis.c (OP_VEX_FMA): Removed.
1407 (OP_EX_VexW): Likewise.
1408 (OP_EX_VexImmW): Likewise.
1409 (OP_XMM_VexW): Likewise.
1410 (VEXI4_Fixup): Likewise.
1411 (VPERMIL2_Fixup): Likewise.
1414 (Vex128FMA): Likewise.
1416 (EXdVexW): Likewise.
1417 (EXqVexW): Likewise.
1418 (EXVexImmW): Likewise.
1420 (VPERMIL2): Likewise.
1421 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1422 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1423 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1424 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1425 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1426 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1427 (get_vex_imm8): Likewise.
1428 (OP_EX_VexReg): Likewise.
1429 vpermil2_op): Likewise.
1431 (vex_w_dq_mode): Likewise.
1432 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1433 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1434 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1436 (PREFIX_VEX_38DB): Likewise.
1437 (PREFIX_VEX_3A4A): Likewise.
1438 (PREFIX_VEX_3A60): Likewise.
1439 (PREFIX_VEX_3ADF): Likewise.
1440 (VEX_LEN_3ADF_P_2): Likewise.
1441 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1442 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1443 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1444 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1445 PREFIX_VEX_3896...PREFIX_VEX_389F,
1446 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1447 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1448 (vex_table): Likewise.
1449 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1450 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1451 (putop): Support "%XW".
1452 (intel_operand_size): Handle vex_w_dq_mode.
1454 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1456 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1457 instructions. Add new FMA instructions.
1458 * i386-tbl.h: Regenerated.
1460 2009-01-02 Matthias Klose <doko@ubuntu.com>
1462 * or32-opc.c (or32_print_register, or32_print_immediate,
1463 disassemble_insn): Don't rely on undefined sprintf behaviour.
1465 For older changes see ChangeLog-2008
1471 version-control: never