opcodes/ChangeLog

   1 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * i386-gen.c (opcode_modifiers): Remove Vex3Sources and
   4         Vex2Sources.  Add VexSources.
   5
   6         * i386-opc.h ()Vex2Sources: Removed.
   7         (Vex3Sources): Likewise.
   8         (VEX2SOURCES): New.
   9         (VEX3SOURCES): Likewise.
  10         (VexSources): Likewise.
  11         (i386_opcode_modifier): Remove vex2sources and vex3sources.
  12         Add vexsources.
  13
  14         * i386-opc.tbl: Replace Vex2Sources with VexSources=1 and
  15         Vex3Sourceswith VexSources=2.
  16         * i386-tbl.h: Regenerated.
  17
  18 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  19
  20         * i386-gen.c (opcode_modifiers): Remove VexW0 and VexW1.  Add
  21         VexW.
  22
  23         * i386-opc.h (VexW0): Removed.
  24         (VexW1): Likewise.
  25         (VEXW0): New.
  26         (VEXW1): Likewise.
  27         (VexW): Likewise.
  28         (i386_opcode_modifier): Remove vexw0 and vexw1.  Add vexw.
  29
  30         * i386-opc.tbl: Replace VexW0 with VexW=1 and VexW1 with
  31         Vex=2.
  32         * i386-tbl.h: Regenerated.
  33
  34 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  35
  36         * i386-dis.c (VEX_W_3818_P_2_M_0): New.
  37         (vex_w_table): Add VEX_W_3818_P_2_M_0.
  38         (mod_table): Use VEX_W_3818_P_2_M_0.
  39
  40 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  41
  42         * i386-dis.c (vex_w_table): Reformat.
  43
  44 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  45
  46         * i386-dis.c (VEX_W_382X_P_2_M_0): New.
  47         (vex_w_table): Add VEX_W_382X_P_2_M_0.
  48         (mod_table): Use VEX_W_382X_P_2_M_0.
  49
  50 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  51
  52         * i386-dis.c (vex_w_table): Reformat.
  53
  54 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  55
  56         * i386-dis.c (USE_VEX_W_TABLE): New.
  57         (VEX_W_TABLE): Likewise.
  58         (VEX_W_XXX): Likewise.
  59         (vex_w_table): Likewise.
  60         (prefix_table): Use VEX_W_XXX.
  61         (vex_table): Likewise.
  62         (vex_len_table): Likewise.
  63         (mod_table): Likewise.
  64         (get_valid_dis386): Handle USE_VEX_W_TABLE.
  65
  66         * i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
  67         isn't used.
  68         * i386-tbl.h: Regenerated.
  69
  70 2009-12-15  H.J. Lu  <hongjiu.lu@intel.com>
  71
  72         * i386-opc.h (VEX128): New.
  73         (VEX256): Likewise.
  74
  75 2009-12-14  H.J. Lu  <hongjiu.lu@intel.com>
  76
  77         * i386-dis.c (vex_len_table): Reformat.
  78
  79 2009-12-14  H.J. Lu  <hongjiu.lu@intel.com>
  80
  81         * i386-dis.c (MOD_VEX_51): Renamed to ...
  82         (MOD_VEX_50): This.
  83         (vex_table): Updated.
  84         (mod_table): Likewise.
  85
  86 2009-12-14  Nick Clifton  <nickc@redhat.com>
  87
  88         PR binutils/10924
  89         * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
  90         results in unpredictable behaviour.
  91         (print_insn_arm): Handle %R.
  92
  93 2009-12-11  H.J. Lu  <hongjiu.lu@intel.com>
  94
  95         * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
  96         prefix.
  97         (print_insn): Don't set vex.w here.
  98
  99 2009-12-11  H.J. Lu  <hongjiu.lu@intel.com>
 100
 101         * i386-dis.c (print_insn): Set vex.w to 0.
 102
 103 2009-12-11  Quentin Neill  <quentin.neill@amd.com>
 104
 105         * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
 106         to avoid fetching ahead for the immediate bytes when OP_E_memory
 107         has already been called.  Fix indentation.
 108
 109 2009-12-11  Nick Clifton  <nickc@redhat.com>
 110
 111         * Makefile.in: Regenerate.
 112         * configure: Regenerate.
 113         * arm-dis.c: Fix shadowed variable warnings.
 114         * cgen-opc.c: Likewise.
 115         * cr16-dis.c: Likewise.
 116         * crx-dis.c: Likewise.
 117         * d30v-dis.c: Likewise.
 118         * fr30-dis.c: Likewise.
 119         * frv-opc.c: Likewise.
 120         * h8500-dis.c: Likewise.
 121         * i386-dis.c: Likewise.
 122         * i960-dis.c: Likewise.
 123         * ia64-gen.c: Likewise.
 124         * ia64-opc.c: Likewise.
 125         * m32c-asm.c: Likewise.
 126         * m32c-dis.c: Likewise.
 127         * m68k-dis.c: Likewise.
 128         * maxq-dis.c: Likewise.
 129         * mcore-dis.c: Likewise.
 130         * mep-asm.c: Likewise.
 131         * microblaze-dis.c: Likewise.
 132         * mmix-dis.c: Likewise.
 133         * ns32k-dis.c: Likewise.
 134         * or32-opc.c: Likewise.
 135         * s390-dis.c: Likewise.
 136         * sh64-dis.c: Likewise.
 137         * spu-dis.c: Likewise.
 138         * tic30-dis.c: Likewise.
 139
 140 2009-12-09  Nick Clifton  <nickc@redhat.com>
 141
 142         PR 10924
 143         * arm-dis.c (print_insn_arm): Mark insns that use the PC in
 144         post-indexed addressing as unpredictable.
 145
 146 2009-12-03  H.J. Lu  <hongjiu.lu@intel.com>
 147
 148         * i386-dis.c (FXSAVE_Fixup): New.
 149         (FXSAVE): Likewise.
 150         (mod_table): Use FXSAVE on fxsave and fxrstor.
 151
 152         * i386-opc.tbl: Add fxsave64 and fxrstor64.
 153         * i386-tbl.h: Regenerated.
 154
 155 2009-12-02  Nick Clifton  <nickc@redhat.com>
 156             Richard Earnshaw  <rearnsha@arm.com>
 157
 158         PR gas/11013
 159         * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
 160         and QDSUB.
 161
 162 2009-11-30  Massimo Ruo Roch  <massimo.ruoroch@polito.it>
 163
 164         PR gas/11030
 165         * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
 166         Coldfire ISA A+.
 167
 168 2009-11-17  Quentin Neill  <quentin.neill@amd.com>
 169             Sebastian Pop  <sebastian.pop@amd.com>
 170
 171         * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
 172         decoding the second source operand from the immediate byte.
 173         (OP_EX_VexW): Pass an extra integer to identify the second
 174         and third source arguments.
 175
 176 2009-11-19  H.J. Lu  <hongjiu.lu@intel.com>
 177
 178         * i386-opc.tbl: Add IsLockable to cmpxch16b.
 179         * i386-tbl.h: Regenerated.
 180
 181 2009-11-19  Nick Clifton  <nickc@redhat.com>
 182
 183         PR binutils/10924
 184         * arm-dis.c (print_insn_arm): Do not print an offset of zero when
 185         decoding Immediaate Offset addressing.
 186
 187 2009-11-18  Sebastian Pop  <sebastian.pop@amd.com>
 188
 189         PR binutils/10973
 190         * i386-dis.c (get_vex_imm8): Do not increment codep.
 191         Avoid incrementing bytes_before_imm when OP_E_memory
 192         has already forwarded the codep pointer.
 193         (OP_EX_VexW): Increment codep to skip mod/rm byte.
 194
 195 2009-11-18  Sebastian Pop  <sebastian.pop@amd.com>
 196
 197         * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
 198         (VEX_LEN_XOP_08_A1): Removed.
 199         (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
 200         VEX_LEN_XOP_08_A1.
 201         (vex_len_table): Same.
 202         * i386-gen.c (CPU_CVT16_FLAGS): Removed.
 203         (cpu_flags): Remove field for CpuCVT16.
 204         * i386-opc.h (CpuCVT16): Removed.
 205         (i386_cpu_flags): Remove bitfield cpucvt16.
 206         (i386-opc.tbl): Remove CVT16 instructions.
 207         * i386-init.h: Regenerated.
 208         * i386-tbl.h: Regenerated.
 209
 210 2009-11-17  Sebastian Pop  <sebastian.pop@amd.com>
 211             Quentin Neill  <quentin.neill@amd.com>
 212
 213         * i386-dis.c (OP_Vex_2src_1): New.
 214         (OP_Vex_2src_2): New.
 215         (Vex_2src_1): New.
 216         (Vex_2src_2): New.
 217         (XOP_08): Added.
 218         (VEX_LEN_XOP_08_A0): Added.
 219         (VEX_LEN_XOP_08_A1): Added.
 220         (VEX_LEN_XOP_09_80): Added.
 221         (VEX_LEN_XOP_09_81): Added.
 222         (xop_table): Added an entry for XOP_08.  Handle xop instructions.
 223         (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
 224         VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
 225         (get_valid_dis386): Handle XOP_08.
 226         (OP_Vex_2src): New.
 227         * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
 228         (cpu_flags): Add CpuXOP and CpuCVT16.
 229         (opcode_modifiers): Add XOP08, Vex2Sources.
 230         * i386-opc.h (CpuXOP): Added.
 231         (CpuCVT16): Added.
 232         (i386_cpu_flags): Add cpuxop and cpucvt16.
 233         (XOP08): Added.
 234         (Vex2Sources): Added.
 235         (i386_opcode_modifier): Add xop08, vex2sources.
 236         * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
 237         * i386-init.h: Regenerated.
 238         * i386-tbl.h: Regenerated.
 239
 240 2009-11-17  Nick Clifton  <nickc@redhat.com>
 241
 242         PR binutils/10924
 243         * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
 244         instruction variants.  Add pattern for MRS variant that was being
 245         confused with CMP.
 246         (arm_decode_shift): Place error message in a comment.
 247         (print_insn_arm): Note that writing back to the PC is
 248         unpredictable.
 249         Only print 'p' variants of cmp/cmn/teq/tst instructions if
 250         decoding for pre-V6 architectures.
 251
 252 2009-11-17  Edward Nevill <edward.nevill@arm.com>
 253
 254         * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
 255
 256 2009-11-14  Doug Evans  <dje@sebabeach.org>
 257
 258         * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
 259         ../cgen/cpu.
 260         * Makefile.in: Regenerate.
 261
 262 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
 263
 264         * i386-dis.c (OP_E_extended): Removed.
 265
 266 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
 267
 268         * i386-dis.c (print_insn): Check rex_ignored.
 269
 270 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
 271
 272         * i386-dis.c (ckprefix): Updated to return 0 if number of
 273         prefixes > 14 and record the last position for each prefix.
 274         (lock_prefix): Removed.
 275         (data_prefix): Likewise.
 276         (addr_prefix): Likewise.
 277         (repz_prefix): Likewise.
 278         (repnz_prefix): Likewise.
 279         (last_lock_prefix): New.
 280         (last_repz_prefix): Likewise.
 281         (last_repnz_prefix): Likewise.
 282         (last_data_prefix): Likewise.
 283         (last_addr_prefix): Likewise.
 284         (last_rex_prefix): Likewise.
 285         (last_seg_prefix): Likewise.
 286         (MAX_CODE_LENGTH): Likewise.
 287         (ADDR16_PREFIX): Likewise.
 288         (ADDR32_PREFIX): Likewise.
 289         (DATA16_PREFIX): Likewise.
 290         (DATA32_PREFIX): Likewise.
 291         (REP_PREFIX): Likewise.
 292         (seg_prefix): Likewise.
 293         (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
 294         (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
 295         DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
 296         (get_valid_dis386): Updated.
 297         (OP_C): Likewise.
 298         (OP_Monitor): Likewise.
 299         (REP_Fixup): Likewise.
 300         (print_insn): Display all prefixes.
 301         (putop): Set PREFIX_DATA on used_prefixes only if it is used.
 302         (intel_operand_size): Likewise.
 303         (OP_E_register): Likewise.
 304         (OP_G): Likewise.
 305         (OP_REG): Likewise.
 306         (OP_IMREG): Likewise.
 307         (OP_I): Likewise.
 308         (OP_I64): Likewise.
 309         (OP_sI): Likewise.
 310         (CRC32_Fixup): Likewise.
 311         (MOVBE_Fixup): Likewise.
 312         (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
 313         in 16bit mode.
 314         (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
 315         used_prefixes only if it is used.
 316
 317 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 318
 319         * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
 320         or, sbb, sub, xor and xchg with register only operands.
 321         * i386-tbl.h: Regenerated.
 322
 323 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 324
 325         * i386-gen.c (opcode_modifiers): Add IsLockable.
 326
 327         * i386-opc.h (IsLockable): New.
 328         (i386_opcode_modifier): Add islockable.
 329
 330         * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
 331         bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
 332         xor, xadd and xchg.
 333         * i386-tbl.h: Regenerated.
 334
 335 2009-11-12  Daniel Jacobowitz  <dan@codesourcery.com>
 336
 337         * arm-dis.c (coprocessor_opcodes): Use %A instead of %C.  Remove
 338         generic coprocessor instructions for FPA loads and stores.
 339         (print_insn_coprocessor): Remove %C support.  Display address for
 340         PC-relative offsets in %A.
 341
 342 2009-11-11  H.J. Lu  <hongjiu.lu@intel.com>
 343
 344         * i386-dis.c (all_prefixes): New.
 345         (ckprefix): Set all_prefixes.
 346         (print_insn): Print all_prefixes instead of lock_prefix,
 347         repz_prefix, repnz_prefix, addr_prefix and data_prefix.
 348
 349 2009-11-11  Nick Clifton  <nickc@redhat.com>
 350
 351         PR binutils/10924
 352         * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
 353         (print_insn_arm): Extend %s format control code to check for
 354         unpredictable addressing modes.  Add support for %S format control
 355         code which suppresses this check.
 356         (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
 357         (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
 358         PRE_BIT_SET): New macros.
 359         (print_insn_coprocessor): Use the new macros instead of magic
 360         constants.
 361         (print_arm_address): Likewise.
 362         (pirnt_insn_arm): Likewise.
 363         (print_insn_thumb32): Likewise.
 364
 365 2009-11-11  Nick Clifton  <nickc@redhat.com>
 366
 367         * po/id.po: Updated Indonesian translation.
 368
 369 2009-11-10  Maxim Kuvyrkov  <maxim@codesourcery.com>
 370
 371         * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
 372
 373 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
 374
 375         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
 376         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
 377         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
 378         the xop_table.
 379         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
 380         XOP instructions.
 381
 382 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
 383             Quentin Neill  <quentin.neill@amd.com>
 384
 385         * opcodes/i386-dis.c (OP_LWPCB_E): New.
 386         (OP_LWP_E): New.
 387         (OP_LWP_I): New.
 388         (USE_XOP_8F_TABLE): New.
 389         (XOP_8F_TABLE): New.
 390         (REG_XOP_LWPCB): New.
 391         (REG_XOP_LWP): New.
 392         (XOP_09): New.
 393         (XOP_0A): New.
 394         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
 395         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
 396         (xop_table): New.
 397         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
 398         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
 399         to access to the vex_table.
 400         (OP_LWPCB_E): New.
 401         (OP_LWP_E): New.
 402         (OP_LWP_I): New.
 403         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
 404         (cpu_flags): Add CpuLWP.
 405         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
 406         * opcodes/i386-opc.h (CpuLWP): New.
 407         (i386_cpu_flags): Add bit cpulwp.
 408         (VexLWP): New.
 409         (XOP09): New.
 410         (XOP0A): New.
 411         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
 412         * opcodes/i386-opc.tbl (llwpcb): Added.
 413         (lwpval): Added.
 414         (lwpins): Added.
 415
 416 2009-11-04  DJ Delorie  <dj@redhat.com>
 417
 418         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
 419         (mvtcp, mvfcp, opecp): Remove.
 420         * rx-decode.c: Regenerate.
 421         * rx-dis.c (cpen): Remove.
 422
 423 2009-11-03  Doug Evans  <dje@sebabeach.org>
 424
 425         * m32c-desc.c: Regenerate.
 426         * mep-desc.c: Regenerate.
 427
 428 2009-11-02  Paul Brook  <paul@codesourcery.com>
 429
 430         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
 431         Add VFPv4 instructions.
 432
 433 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
 434
 435         * i386-dis.c (OP_VEX_FMA): Removed.
 436         (VexFMA): Removed.
 437         (Vex128FMA): Removed.
 438         (prefix_table): First source operand of FMA4 insns is decoded
 439         with Vex not with VexFMA.
 440         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
 441         when vex.w is set.  Third source operand is decoded with
 442
 443 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
 444
 445         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
 446         * Makefile.in: Regenerate.
 447         * po/POTFILES.in: Regenerate.
 448
 449 2009-10-23  Doug Evans  <dje@sebabeach.org>
 450
 451         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
 452         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
 453         * cgen-bitset.c: Update.
 454         * fr30-desc.h: Regenerate.
 455         * frv-desc.h: Regenerate.
 456         * ip2k-desc.h: Regenerate.
 457         * iq2000-desc.h: Regenerate.
 458         * lm32-desc.h: Regenerate.
 459         * m32c-desc.h: Regenerate.
 460         * m32c-opc.h: Regenerate.
 461         * m32r-desc.h: Regenerate.
 462         * mep-desc.h: Regenerate.
 463         * mt-desc.h: Regenerate.
 464         * openrisc-desc.h: Regenerate.
 465         * xc16x-desc.h: Regenerate.
 466         * xstormy16-desc.h: Regenerate.
 467
 468 2009-10-22  DJ Delorie  <dj@redhat.com>
 469
 470         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
 471         * rx-decode.c: Regenerated.
 472
 473 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 474
 475         PR gas/10775
 476         * i386-dis.c: Document LB, LS and LV macros.
 477         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 478         with the 64-bit displacement or immediate operand.
 479         (putop): Handle LB, LS and LV macros.
 480
 481 2009-10-18  Doug Evans  <dje@sebabeach.org>
 482
 483         * lm32-opinst.c: Regenerate.
 484         * m32c-desc.c: Regenerate.
 485         * m32r-opinst.c: Regenerate.
 486         * openrisc-ibld.c: Regenerate.
 487         * xc16x-desc.c: Regenerate.
 488         * xc16x-desc.h: Regenerate.
 489
 490 2009-10-17  Doug Evans  <dje@sebabeach.org>
 491
 492         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 493         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 494         sorted alphabetically.
 495         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 496         stamp-* rules are sorted alphabetically.
 497         * Makefile.in: Regenerate.
 498
 499 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 500
 501         * i386-opc.h: Use enum instead of nested macros.
 502
 503 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 504
 505         * i386-dis.c: Simplify enums.
 506
 507 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 508             Ineiev <ineiev@gmail.com>
 509
 510         PR binutils/10767
 511         * i386-dis.c: Use enum instead of nested macros.
 512
 513 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 514
 515         * i386-dis.c (MAX_BYTEMODE): Removed.
 516
 517 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 518
 519         PR 969
 520         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 521
 522 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 523
 524         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 525         and vex_w_done.
 526
 527 2009-10-07  Michael Eager  <eager@eagercon.com>
 528
 529         * microblaze-dis.c: Add include for microblaze-dis.h,
 530         eliminate local extern decls.
 531         * microblaze-dis.h: New.
 532
 533 2009-10-06  Nick Clifton  <nickc@redhat.com>
 534
 535         * po/fi.po: Updated Finnish translation.
 536
 537 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 538
 539         * opc2c.c: Include "libiberty.h" and <errno.h>.
 540         (orig_filename): Constify.
 541         (dump_lines): Fix line number directive.
 542         (main): Set orig_filename to basename of input file.  Use
 543         xstrerror.
 544
 545         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 546         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 547         instead of $(EXEEXT).
 548         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 549         $(LINK_FOR_BUILD).  Link with libiberty.
 550         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 551         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 552         * Makefile.in: Regenerated.
 553         * rx-decode.c: Regenerated.
 554
 555 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 556
 557         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 558
 559 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 560
 561         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 562         * i386-tbl.h: Regenerated.
 563
 564 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 565
 566         * ppc-dis.c (ppc_opts): Add "476" entry.
 567         * ppc-opc.c (PPC476): Define.
 568         (powerpc_opcodes): Update mnemonics where required for 476.
 569
 570 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 571
 572         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 573         * ppc-dis.c (ppc_opts): Likewise.
 574         Rename "ppca2" to "a2".
 575
 576 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 577
 578         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 579
 580 2009-09-29  DJ Delorie  <dj@redhat.com>
 581
 582         * Makefile.am: Add RX files.
 583         * configure.in: Add support for RX target.
 584         * disassemble.c: Likewise.
 585         * Makefile.in: Regenerate.
 586         * configure: Regenerate.
 587         * opc2c.c: New file.
 588         * rx-decode.c: New file.
 589         * rx-decode.opc: New file.
 590         * rx-dis.c: New file.
 591
 592 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 593
 594         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 595         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 596
 597 2009-09-25  Michael Eager  <eager@eagercon.com>
 598
 599         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 600         microblaze_decode_insn): Add declarations.
 601         (get_delay_slots_microblaze): Remove.
 602
 603 2009-09-25  Martin Thuresson  <martint@google.com>
 604
 605         Update sources to make arc and arm targets compile cleanly with
 606         -Wc++-compat:
 607         * arc-dis.c Fix casts.
 608         * arc-ext.c: Add casts.
 609         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 610         enum.
 611
 612 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 613
 614         * i386-gen.c (opcode_modifiers): Remove Vex256.
 615         (set_bitfield): Handle XXX=V.
 616
 617         * i386-opc.h (Vex): Update comments.
 618         (Vex256): Removed.
 619         (VexNDS): Updated.
 620         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 621
 622         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 623         * i386-tbl.h: Regenerated.
 624
 625 2009-09-23  Nick Clifton  <nickc@redhat.com>
 626
 627         * po/fr.po: Updated French translation.
 628
 629 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 630             Peter Bergner  <bergner@vnet.ibm.com>
 631
 632         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 633         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 634         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 635         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 636         ici mnemonics.
 637         (ERAT_T): New operand.
 638         (XWC_MASK): New mask.
 639         (XOPL2): New macro.
 640         (PPCA2): Define.
 641
 642 2009-09-18  Nick Clifton  <nickc@redhat.com>
 643
 644         * po/es.po: Updated Spanish translation.
 645         * po/vi.po: Updated Vietnamese translation.
 646
 647 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 648
 649         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 650         disp == -disp.
 651
 652 2009-09-14  Nick Clifton  <nickc@redhat.com>
 653
 654         * po/nl.po: Updated Dutch translation.
 655
 656 2009-09-11  Nick Clifton  <nickc@redhat.com>
 657
 658         * po/opcodes.pot: Updated by the Translation project.
 659
 660 2009-09-11  Martin Thuresson  <martint@google.com>
 661
 662         Updated sources to compile cleanly with -Wc++-compat:
 663         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 664         * ldcref.c: Add casts.
 665         * ldctor.c: Add casts.
 666         * ldexp.c
 667         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 668         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 669         * ldlang.h (enum statement_enum): Move to top level.
 670         * ldmain.c: Add casts.
 671         * ldwrite.c: Add casts.
 672         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 673         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 674
 675 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 676
 677         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 678
 679 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 680
 681         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 682         (print_insn_s390): Signextend and shift pcrel operands before printing.
 683
 684 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 685
 686         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 687         VEX_LEN_AE_R_X_M_0 in comments.
 688
 689 2009-09-08  DJ Delorie  <dj@redhat.com>
 690
 691         * mep-opc.c: Regenerate.
 692
 693 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 694
 695         * z8kgen.c (struct op): Replace unused flavor with id.
 696         (opt): Remove extra xorb entry.
 697         (func): Use id field as fallback.
 698         (sub): Return new string, caller changed.
 699         (internal): Allocate end marker.  Assign unique id before sorting.
 700         (gas): Likewise.  Fix loop end condition.
 701         * z8k-opc.h: Regenerate.
 702
 703 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 704
 705         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 706
 707 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 708
 709         * z8kgen.c (func): Fix thinko last patch.
 710
 711 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 712
 713         * z8kgen.c (func): Stabilize qsort of identically named entries.
 714         * z8k-opc.h: Regenerate.
 715
 716 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 717
 718         * po/opcodes.pot: Regenerate.
 719
 720 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 721
 722         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 723         * configure: Regenerate.
 724         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 725         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 726         (i386-gen, ia64-gen, z8kgen): ..here.
 727         * Makefile.in: Regenerate.
 728
 729 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 730
 731         * z8k-opc.h: Regenerate.
 732
 733 2009-09-05  Martin Thuresson  <martin@mtme.org>
 734
 735         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 736         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 737         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 738         Rename argument class to symbol_class.
 739
 740 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 741
 742         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 743         to the new encoding of DBGA, DBGAH, and DBGAL.
 744         (_print_insn_bfin): Likewise.
 745
 746 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 747
 748         * bfin-dis.c (_print_insn_bfin): Don't declare.
 749         (print_insn_bfin): Don't declare.
 750         (dregs_pair): Remove.
 751         (ignore_bits): Remove.
 752         (ccstat): Remove.
 753
 754 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 755
 756         * bfin-dis.c (IS_DREG): Define.
 757         (IS_PREG): Define.
 758         (IS_AREG): Define.
 759         (IS_GENREG): Define.
 760         (IS_DAGREG): Define.
 761         (IS_SYSREG): Define.
 762         (decode_REGMV_0): Check illegal register move instructions.
 763
 764 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 765
 766         * Makefile.am (BUILD_LIBINTL): New variable.
 767         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 768         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 769         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 770         * Makefile.in: Regenerate.
 771
 772 2009-09-01  DJ Delorie  <dj@redhat.com>
 773
 774         * mep-asm.c: Regenerate.
 775         * mep-desc.c: Regenerate.
 776         * mep-opc.c: Regenerate.
 777
 778 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 779
 780         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 781         dependencies.  Remove unused FORMAT variable.
 782         * configure.com: New file to create build.com DCL script for
 783         Itanium VMS or Alpha VMS.
 784
 785 2009-08-29  Martin Thuresson  <martin@mtme.org>
 786
 787         * cris-dis.c (bytes_to_skip): Update code to use new name.
 788         * i386-dis.c (putop): Update code to use new name.
 789         * i386-gen.c (process_i386_opcodes): Update code to use
 790         new name.
 791         * i386-opc.h (struct template): Rename struct template to
 792         insn_template. Update code accordingly.
 793         * i386-tbl.h (i386_optab): Update type to use new name.
 794         * ia64-dis.c (print_insn_ia64): Rename variable template
 795         to template_val.
 796         * tic30-dis.c (struct instruction, get_tic30_instruction):
 797         Update code to use new name.
 798         * tic54x-dis.c (has_lkaddr, get_insn_size)
 799         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 800         Update code to use new name.
 801         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 802         Update type to new name.
 803         * z8kgen.c (internal, gas): Rename variable new to new_op.
 804
 805 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 806
 807         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 808         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 809         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 810         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 811         * Makefile.in: Regenerated.
 812
 813 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 814
 815         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 816         [INSTALL_LIBBFD]: ... here, ...
 817         [INSTALL_LIBBFD]: ... and empty overrides here.
 818         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 819         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 820         * Makefile.in: Regenerate.
 821         * configure: Regenerate.
 822
 823 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 824
 825         * m68k-dis.c (print_insn_arg): Add movecr register names for
 826         coldfire v4e families.
 827
 828 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 829
 830         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 831         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 832         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 833         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 834         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 835         (i386-gen.o): New rule.
 836         ($(srcdir)/i386-init.h): Adjust.
 837         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 838         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 839         (ia64-gen.o): New rule.
 840         (ia64_asmtab_deps): New variable.
 841         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 842         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 843         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 844         likewise.
 845         (s390-opc.tab): Adjust.
 846         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 847         rules.
 848         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 849         * Makefile.in: Regenerate.
 850         * z8kgen.c (gas): Avoid '/*' in comment.
 851         * z8k-opc.h (func): Regenerate.
 852
 853 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 854
 855         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 856         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 857         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 858         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 859         msp430-dis.c added.
 860         (LIBOPCODES_CFILES): New variable, adding to
 861         TARGET_LIBOPCODES_CFILES also non-target library sources.
 862         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 863         files.
 864         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 865         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 866         * Makefile.in: Regenerate.
 867         * po/POTFILES.in: Regenerate.
 868
 869 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 870
 871         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 872         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 873         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 874         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 875         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 876         is built shared even if it is not to be installed.
 877         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 878         (install_libopcodes, uninstall_libopcodes): Remove.
 879         (AM_CPPFLAGS): Renamed from ...
 880         (INCLUDES): ... this.
 881         * Makefile.in: Regenerate.
 882
 883         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 884         1.11, foreign, no-dist.
 885         (MKDEP, m32c_opc_h): Remove variables.
 886         (disassemble.lo): Rewrite using automake-style dependency
 887         tracking rules; only list the dependency upon the primary source
 888         file, but no included headers.
 889         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 890         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 891         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 892         ensure all dependency fragments are included in the Makefile.
 893         (s390-opc.lo): Depend on s390-opc.tab.
 894         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 895         (mkdep section): Remove.
 896         * Makefile.in: Regenerate.
 897         * po/POTFILES.in: Regenerate.
 898
 899         * Makefile.am (install-pdf, install-html): Remove.
 900         * Makefile.in: Regenerate.
 901
 902         * Makefile.in: Regenerate.
 903         * aclocal.m4: Likewise.
 904         * config.in: Likewise.
 905         * configure: Likewise.
 906
 907 2009-08-06  Michael Eager <eager@eagercon.com>
 908
 909         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 910         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 911         * Makefile.in: Regenerate.
 912         * configure.in: Add bfd_microblaze_arch target.
 913         * configure: Regenerate.
 914         * disassemble.c: Define ARCH_microblaze, return
 915         print_insn_microblaze().
 916         * microblaze-dis.c: New MicroBlaze disassembler.
 917         * microblaze-opc.h: New MicroBlaze opcode definitions.
 918         * microblaze-opcm.h: New MicroBlaze opcode types.
 919
 920 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 921
 922         * configure.in: Handle bfd_l1om_arch.
 923         * disassemble.c (disassembler): Likewise.
 924
 925         * configure: Regenerated.
 926
 927         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 928         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 929
 930         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 931         Add CPU_L1OM_FLAGS.
 932         (cpu_flags): Add CpuL1OM.
 933         (set_bitfield): Take an argument to set the value field.
 934         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 935         (process_i386_opcode_modifier): Updated.
 936         (process_i386_operand_type): Likewise.
 937         * i386-init.h: Regenerated.
 938         * i386-tbl.h: Likewise.
 939
 940         * i386-opc.h (CpuL1OM): New.
 941         (CpuXsave): Updated.
 942         (i386_cpu_flags): Add cpul1om.
 943
 944 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 945
 946         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 947         frstpm.
 948         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 949         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 950         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 951         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 952         Define.
 953         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 954         and cpufisttp.
 955         * i386-opc.tbl: Qualify floating point instructions by their
 956         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 957         and fsincos to be avilable only on 387. Fix fstsw ax to be
 958         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 959         and frstpm.
 960         * i386-init.h, i386-tbl.h: Regenerate.
 961
 962 2009-07-20  Nick Clifton  <nickc@redhat.com>
 963
 964         PR 10288
 965         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 966         offset or indexed based addressing mode 3.
 967
 968 2009-07-14  Nick Clifton  <nickc@redhat.com>
 969
 970         PR 10288
 971         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 972         patterns.
 973         (arm_decode_shift): Catch illegal register based shifts.
 974         (print_insn_arm): Properly handle negative register r0
 975         post-indexed addressing.
 976
 977 2009-07-10  Doug Kwan  <dougkwan@google.com>
 978
 979         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 980         lower 32 bits of long types to make hexadecimal output consistent
 981         on both 32-bit and 64-bit hosts.
 982
 983 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 984
 985         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 986         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 987         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 988         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 989         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 990         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 991         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 992         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 993         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 994         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 995         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 996         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 997
 998 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 999
1000         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
1001
1002 2009-07-07  Nick Clifton  <nickc@redhat.com>
1003
1004         PR 10288
1005         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
1006         addressing modes.
1007
1008 2009-07-06  DJ Delorie  <dj@redhat.com>
1009
1010         * mep-desc.c: Regenerate.
1011         * mep-desc.h: Regenerate.
1012         * mep-opc.c: Regenerate.
1013         * mep-opc.h: Regenerate.
1014
1015 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
1016
1017         * i386-opc.h (CpuFMA4): Add CpuFMA4.
1018         (i386_cpu_flags): New.
1019         * i386-gen.c: Add CPU_FMA4_FLAGS.
1020         * i386-opc.tbl: Add FMA4 instructions.
1021         * i386-tbl.h: Regenerate.
1022         * i386-init.h: Regenerate.
1023         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
1024         (OP_XMM_VexW): Ditto.
1025         (OP_EX_VexW): Ditto.
1026         (VEXI4_Fixup): Ditto.
1027         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
1028         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
1029         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
1030         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
1031         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
1032         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
1033         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
1034         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
1035         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
1036         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
1037         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
1038         (get_vex_imm8): New. handle FMA4.
1039         (OP_EX_VexReg): Ditto.
1040
1041 2009-06-30  Nick Clifton  <nickc@redhat.com>
1042
1043         PR 10288
1044         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
1045         LFM and SFM instructions as comments,.
1046         Improve consistency of formatting for instructions displayed as
1047         comments and decimal values displayed with their hexadecimal
1048         equivalents.
1049         Formatting tidy ups.
1050
1051 2009-06-29  Nick Clifton  <nickc@redhat.com>
1052
1053         PR 10288
1054         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
1055         boundary between variaant and generic coprocessor instuctions.
1056         (coprocessor): Use it.
1057         Fix architecture version of MCRR and MRRC instructions.
1058         (arm_opcdes): Fix patterns for STRB and STRH instructions.
1059         (print_insn_coprocessor): Check architecture and extension masks.
1060         Print a hexadecimal version of any decimal constant that is
1061         outside of the range of -16 to +32.
1062         (print_arm_address): Add a return value of the offset used in the
1063         adress, if it is worth printing a hexadecimal version of it.
1064         (print_insn_neon): Print a hexadecimal version of any decimal
1065         constant that is outside of the range of -16 to +32.
1066         (print_insn_arm): Likewise.
1067         (print_insn_thumb16): Likewise.
1068         (print_insn_thumb32): Likewise.
1069
1070         PR 10297
1071         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
1072         of an undefined instruction.
1073         (arm_opcodes): Use it.
1074         (thumb_opcod): Use it.
1075         (thumb32_opc): Use it.
1076
1077 2009-06-23  DJ Delorie  <dj@redhat.com>
1078
1079         * mep-desc.c: Regenerate.
1080         * mep-desc.h: Regenerate.
1081         * mep-dis.c: Regenerate.
1082         * mep-ibld.c: Regenerate.
1083         * mep-opc.c: Regenerate.
1084
1085         * mep-asm.c: Regenerate.
1086         * mep-opc.c: Regenerate.
1087         * mep-opc.h: Regenerate.
1088
1089 2009-06-22  Nick Clifton  <nickc@redhat.com>
1090
1091         * po/fi.po: Updated Finish translation.
1092
1093 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
1094
1095         * m32c-asm.c: Regenerate.
1096
1097 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
1098
1099         * score-dis.c (print_insn_score48, print_insn_score32): Move default
1100         case label to proper lexical block.
1101         * score7-dis.c (print_insn_score32): Likewise.
1102
1103 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
1104
1105         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1106         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1107         * s390-opc.txt (nopr, nop): Use new instruction format.
1108
1109 2009-06-18  Nick Clifton  <nickc@redhat.com>
1110
1111         PR 10288
1112         * arm-dis.c (print_insn_coprocessor): Check that a user specified
1113         ARM architecture supports the matched instruction.
1114         (print_insn_arm): Likewise.
1115         (select_arm_features): New function.  Fills in the fields of an
1116         arm_feature_set structure based on a given arm machine number.
1117         (print_insn): Initialise an arm_feature_set structure.
1118
1119 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
1120
1121         * vax-dis.c (is_function_entry): Return success for synthetic
1122         symbols too.
1123         (is_plt_tail): New function.
1124         (print_insn_vax): Decode PLT entry offset longword.
1125
1126 2009-06-15  Nick Clifton  <nickc@redhat.com>
1127
1128         PR 10186
1129         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1130         instruction.
1131
1132         PR 10173
1133         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1134
1135 2009-06-15  Nick Clifton  <nickc@redhat.com>
1136
1137         PR 10263
1138         * arm-dis.c (print_insn): Ignore is_data if the user has requested
1139         the disassembly of data as well as instructions.
1140
1141 2009-06-11  Doug Evans  <dje@sebabeach.org>
1142
1143         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1144
1145 2009-06-11  Anthony Green  <green@moxielogic.com>
1146
1147         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1148         (moxie_form3_opc_info): Add branch instructions.
1149         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1150         encoded instructions.
1151
1152 2009-06-06  Anthony Green  <green@moxielogic.com>
1153
1154         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1155         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1156
1157 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
1158
1159         * dep-in.sed: Don't use \n in replacement part of s command.
1160         * Makefile.am (DEP1): LC_ALL for uniq.
1161         * Makefile.in: Regenerate.
1162
1163 2009-06-02  Nick Clifton  <nickc@redhat.com>
1164
1165         * po/nl.po: Updated Dutch translation.
1166
1167 2009-06-02  Tristan Gingold  <gingold@adacore.com>
1168
1169         * ia64-gen.c (parse_resource_users, print_dependency_table,
1170         add_dis_table_ent, finish_distable, insert_bit_table_ent,
1171         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1172         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1173         insert_completer_entry, print_completer_entry, print_completer_table,
1174         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1175
1176 2009-05-28  DJ Delorie  <dj@redhat.com>
1177
1178         * mep-asm.c: Regenerate.
1179         * mep-desc.c: Regenerate.
1180
1181 2009-05-26  DJ Delorie  <dj@redhat.com>
1182
1183         * mep-asm.c: Regenerate.
1184         * mep-desc.c: Regenerate.
1185         * mep-desc.h: Regenerate.
1186         * mep-dis.c: Regenerate.
1187         * mep-ibld.c: Regenerate.
1188         * mep-opc.c: Regenerate.
1189         * mep-opc.h: Regenerate.
1190
1191 2009-05-26  Nick Clifton  <nickc@redhat.com>
1192
1193         * po/id.po: Updated Indonesian translation.
1194         * po/opcodes.pot: Updated template file.
1195
1196 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
1197
1198         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
1199         per line with all lines having continuation backslash.  Prefix
1200         first line with "A", following lines with "B".
1201         * Makefile.am (DEP): Don't use dep.sed here.
1202         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
1203         dep.sed here on dependencies, sort and uniq.
1204         * Makefile.in: Regenerate.
1205
1206 2009-05-25  Tristan Gingold  <gingold@adacore.com>
1207
1208         * makefile.vms (OPT): New variable.
1209         (CFLAGS): Update compilation flags.
1210
1211 2009-05-22  DJ Delorie  <dj@redhat.com>
1212
1213         * mep-asm.c: Regenerate.
1214         * mep-desc.c: Regenerate.
1215         * mep-desc.h: Regenerate.
1216         * mep-dis.c: Regenerate.
1217         * mep-ibld.c: Regenerate.
1218         * mep-opc.c: Regenerate.
1219         * mep-opc.h: Regenerate.
1220
1221 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
1222
1223         * i386-opc.h (Cpusse5): Delete.
1224         (i386_cpu_flags): Delete.
1225         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1226         * i386-opc.tbl: Remove SSE5 instructions.
1227         * i386-tbl.h: Regenerate.
1228         * i386-init.h: Regenerate.
1229         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1230         (print_drex_arg): Delete.
1231         (OP_DREX4): Delete.
1232         (OP_DREX3): Delete.
1233         (OP_DREX_ICMP): Delete.
1234         (OP_DREX_FCMP): Delete.
1235         (DREX_*): Delete.
1236         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1237
1238 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
1239
1240         * Makefile.am: Run "make dep-am".
1241         * Makefile.in: Regenerate.
1242         * po/POTFILES.in: Regenerate.
1243
1244 2009-05-19  DJ Delorie  <dj@redhat.com>
1245
1246         * mep-asm.c: Regenerate.
1247         * mep-opc.c: Regenerate.
1248
1249 2009-04-30  DJ Delorie  <dj@redhat.com>
1250
1251         * mep-asm.c: Regenerate.
1252         * mep-desc.c: Regenerate.
1253         * mep-desc.h: Regenerate.
1254         * mep-dis.c: Regenerate.
1255         * mep-ibld.c: Regenerate.
1256         * mep-opc.c: Regenerate.
1257         * mep-opc.h: Regenerate.
1258
1259 2009-04-17  DJ Delorie  <dj@redhat.com
1260
1261         * mep-desc.c: Regenerate.
1262         * mep-ibld.c: Regenerate.
1263         * mep-opc.c: Regenerate.
1264         * mep-opc.h: Regenerate.
1265
1266 2009-04-15  Anthony Green  <green@moxielogic.com>
1267
1268         * moxie-opc.c, moxie-dis.c: Created.
1269         * Makefile.am: Build the moxie source files.
1270         * configure.in: Add moxie support.
1271         * Makefile.in, configure: Rebuilt.
1272         * disassemble.c (disassembler): Add moxie support.
1273         (ARCH_moxie): Define.
1274
1275 2009-04-15  Jan Beulich  <jbeulich@novell.com>
1276
1277         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1278         extension to None.
1279         (pshab, pshaw, pshad, pshaq): Likewise.
1280         * i386-tbl.h: Re-generate.
1281
1282 2009-04-08  DJ Delorie  <dj@redhat.com
1283
1284         * mep-asm.c: Regenerate.
1285         * mep-desc.c: Regenerate.
1286         * mep-desc.h: Regenerate.
1287         * mep-dis.c: Regenerate.
1288         * mep-ibld.c: Regenerate.
1289         * mep-opc.c: Regenerate.
1290         * mep-opc.h: Regenerate.
1291
1292 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
1293
1294         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1295         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1296         Reorder entries so the extended mnemonics are listed before tlbilx.
1297
1298 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
1299
1300         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1301         due to -many/-Many.
1302         (print_insn_powerpc): Make sure we only deprecate instructions using
1303         the original dialect and not a modified dialect due to -Many handling.
1304         Move the handling of the condition register and default operands to
1305         the end of the if/else if/else chain.
1306         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1307         instructions from newer processors are listed before older ones.
1308         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1309         that have instructions with conflicting opcodes.
1310
1311 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
1312
1313         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1314         E500MC entries.
1315
1316 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
1317
1318         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1319
1320 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
1321
1322         * arm-dis.c (print_insn): Also check section matches in backwards
1323         search for mapping symbol.
1324
1325 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
1326
1327         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1328
1329 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
1330
1331         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1332         * Makefile.am: Run "make dep-am".
1333         * Makefile.in: Regenerate.
1334         * openrisc-opc.c: Regenerate.
1335
1336 2009-03-10  Nick Clifton  <nickc@redhat.com>
1337
1338         * po/id.po: Updated Indonesian translation.
1339
1340 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
1341
1342         * ppc-dis.c: Include "opintl.h".
1343         (struct ppc_mopt, ppc_opts): New.
1344         (ppc_parse_cpu): New function.
1345         (powerpc_init_dialect): Use it.
1346         (print_ppc_disassembler_options): Dump options from ppc_opts.
1347         Internationalize message.
1348
1349 2009-03-06  Nick Clifton  <nickc@redhat.com>
1350
1351         * po/es.po: Updated Spanish translation.
1352
1353 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
1354
1355         PR 6768
1356         * configure.in: Test for ld --as-needed support.  Link shared
1357         libopcodes against libm.
1358         * configure: Regenerate.
1359
1360 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
1361
1362         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1363         instructions from newer processors are listed before older ones.
1364
1365 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
1366
1367         * Makefile.am: Run "make dep-am".
1368         (HFILES): Move lm32-desc.h and lm32-opc.h from..
1369         (CFILES): ..here.
1370         * Makefile.in: Regenerate.
1371
1372 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1373
1374         * score7-dis.c: New file.
1375         * Makefile.am: Add dependencies for score7-dis.c.
1376         * Makefile.in: Regenerate.
1377         * configure.in: Add score7-dis to score files.
1378         * configure: Regenerate.
1379         * score-dis.c: Add support for score7 architecture.
1380         * score-opc.h: Likewise.
1381
1382 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1383
1384         * configure: Regenerate.
1385
1386 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1387
1388         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1389
1390 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1391
1392         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1393         the power7 and the isel instructions.
1394         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1395         (insert_dm, extract_dm): Likewise.
1396         (XB6): Update comment to include XX2 form.
1397         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1398         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1399         (RemoveXX3DM): Delete.
1400         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1401         "mftgpr">: Deprecate for POWER7.
1402         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1403         "frsqrte.">: Deprecate the three operand form and enable the two
1404         operand form for POWER7 and later.
1405         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1406         <"waitsrv", "waitimpl">: Add extended opcodes.
1407         <"ldbrx", "stdbrx">: Enable for POWER7.
1408         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1409         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1410         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1411         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1412         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1413         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1414         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1415         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1416         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1417         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1418         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1419         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1420         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1421         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1422         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1423         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1424         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1425         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1426         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1427         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1428         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1429         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1430         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1431         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1432         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1433         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1434         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1435         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1436         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1437         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1438         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1439         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1440         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1441         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1442         "xxspltw", "xxswapd">: Add VSX opcodes.
1443
1444 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1445
1446         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1447         (operand_types): Remove Vex_Imm4.
1448
1449         * i386-opc.h (Vex_Imm4): Removed.
1450         (OTMax): Updated.
1451         (i386_operand_type): Remove vex_imm4.
1452
1453         * i386-opc.tbl: Remove Vex_Imm4 comments.
1454         * i386-init.h: Regenerated.
1455         * i386-tbl.h: Likewise.
1456
1457 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1458
1459         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1460         vq{r}shr{u}n.s64 insnstructions.
1461
1462 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1463
1464         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1465         operand to be a float point register (FRT/FRS).
1466
1467 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1468
1469         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1470         dmfc2 and dmtc2 before the architecture-level variants.
1471
1472 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1473
1474         * fr30-opc.c: Regenerate.
1475         * frv-opc.c: Regenerate.
1476         * ip2k-opc.c: Regenerate.
1477         * iq2000-opc.c: Regenerate.
1478         * lm32-opc.c: Regenerate.
1479         * m32c-opc.c: Regenerate.
1480         * m32r-opc.c: Regenerate.
1481         * mep-opc.c: Regenerate.
1482         * mt-opc.c: Regenerate.
1483         * xc16x-opc.c: Regenerate.
1484         * xstormy16-opc.c: Regenerate.
1485         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1486         sprintf call.
1487
1488 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1489
1490         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1491
1492 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1493
1494         * ppc-opc.c: Update copyright year.
1495         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1496         ordering for POWER4 and later and use the correct Server ordering.
1497
1498 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1499
1500         AVX Programming Reference (January, 2009)
1501         * i386-dis.c (PREFIX_VEX_3A44): New.
1502         (VEX_LEN_3A44_P_2): Likewise.
1503         (PREFIX_VEX_3A48): Updated.
1504         (VEX_LEN_3A4C_P_2): Likewise.
1505         (prefix_table): Add PREFIX_VEX_3A44.
1506         (vex_table): Likewise.
1507         (vex_len_table): Add VEX_LEN_3A44_P_2.
1508
1509         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1510         * i386-tbl.h: Regenerated.
1511
1512 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1513
1514         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1515         (mips_arch_choices): Add XLR entry.
1516         * mips-opc.c (XLR): Define.
1517         (mips_builtin_opcodes): Add XLR instructions.
1518
1519 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1520
1521         * Makefile.am: Add install-pdf target.
1522         * po/Make-in: Add install-pdf target.
1523         * Makefile.in: Regenerate.
1524
1525 2009-02-02  DJ Delorie  <dj@redhat.com>
1526
1527         * mep-asm.c: Regenerate.
1528         * mep-desc.c: Regenerate.
1529         * mep-desc.h: Regenerate.
1530         * mep-dis.c: Regenerate.
1531         * mep-ibld.c: Regenerate.
1532         * mep-opc.c: Regenerate.
1533         * mep-opc.h: Regenerate.
1534
1535 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1536
1537         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1538         qsub, and qdsub.
1539
1540 2009-01-28  Chao-ying Fu  <fu@mips.com>
1541
1542         * mips-opc.c (suxc1): Add the flag of FP_D.
1543
1544 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1545
1546         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1547         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1548         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1549         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1550         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1551         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1552         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1553         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1554
1555 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1556
1557         * configure.in (commonbfdlib): Delete.
1558         (SHARED_LIBADD): Add pic libiberty if such is available.
1559         * configure: Regenerate.
1560         * po/POTFILES.in: Regenerate.
1561
1562 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1563
1564         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1565         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1566         operand form and enable the four operand form for POWER6 and later.
1567         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1568         three operand form for POWER6 and later.
1569
1570 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1571
1572         * bfin-dis.c (OUTS): Use "%s" as format string.
1573
1574 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1575
1576         * i386-gen.c (cpu_flag_init): Remove a white space.
1577         (operand_type_init): Likewise.
1578
1579 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1580
1581         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1582         * i386-tbl.h: Regenerated.
1583
1584 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1585
1586         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1587         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1588         subS, xorS and cmpS.
1589
1590 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1591
1592         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1593         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1594         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1595         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1596         and CpuSYSCALL.
1597         (lineno): Removed.
1598         (set_bitfield): Take an argument, lineno.  Don't report lineno
1599         on error if it is -1.
1600         (process_i386_cpu_flag): Take an argument, lineno.
1601         (process_i386_opcode_modifier): Likewise.
1602         (process_i386_operand_type): Likewise.
1603         (output_i386_opcode): Likewise.
1604         (opcode_hash_entry): Add lineno.
1605         (process_i386_opcodes): Updated.
1606         (process_i386_registers): Likewise.
1607         (process_i386_initializers): Likewise.
1608
1609         * i386-opc.h (CpuP4): Removed.
1610         (CpuK6): Likewise.
1611         (CpuK8): Likewise.
1612         (CpuClflush): New.
1613         (CpuSYSCALL): Likewise.
1614         (CpuMMX): Updated.
1615         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1616         cpuclflush and cpusyscall.
1617
1618         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1619         syscall and sysret.
1620         * i386-init.h: Regenerated.
1621         * i386-tbl.h: Likewise.
1622
1623 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1624
1625         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1626         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1627         (cpu_flags): Add CpuRdtscp.
1628         (set_bitfield): Remove CpuSledgehammer check.
1629
1630         * i386-opc.h (CpuRdtscp): New.
1631         (CpuLM): Updated.
1632         (i386_cpu_flags): Add cpurdtscp.
1633
1634         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1635         * i386-init.h: Regenerated.
1636         * i386-tbl.h: Likewise.
1637
1638 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1639
1640         * ppc-opc.c (PPCNONE): Define.
1641         (NOPOWER4): Delete.
1642         (powerpc_opcodes): Initialize the new "deprecated" field.
1643
1644 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1645
1646         AVX Programming Reference (December, 2008)
1647         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1648         (VEX_LEN_E7_P_2_M_0): Likewise.
1649         (VEX_LEN_2C_P_1): Updated.
1650         (VEX_LEN_E8_P_2): Likewise.
1651         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1652         (mod_table): Likewise.
1653
1654         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1655         * i386-tbl.h: Regenerated.
1656
1657 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1658
1659         * i386-gen.c (process_copyright): Update for 2009.
1660
1661         * i386-init.h: Regenerated.
1662         * i386-tbl.h: Likewise.
1663
1664 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1665
1666         AVX Programming Reference (December, 2008)
1667         * i386-dis.c (OP_VEX_FMA): Removed.
1668         (OP_EX_VexW): Likewise.
1669         (OP_EX_VexImmW): Likewise.
1670         (OP_XMM_VexW): Likewise.
1671         (VEXI4_Fixup): Likewise.
1672         (VPERMIL2_Fixup): Likewise.
1673         (VexI4): Likewise.
1674         (VexFMA): Likewise.
1675         (Vex128FMA): Likewise.
1676         (EXVexW): Likewise.
1677         (EXdVexW): Likewise.
1678         (EXqVexW): Likewise.
1679         (EXVexImmW): Likewise.
1680         (XMVexW): Likewise.
1681         (VPERMIL2): Likewise.
1682         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1683         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1684         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1685         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1686         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1687         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1688         (get_vex_imm8): Likewise.
1689         (OP_EX_VexReg): Likewise.
1690         vpermil2_op): Likewise.
1691         (EXVexWdq): New.
1692         (vex_w_dq_mode): Likewise.
1693         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1694         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1695         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1696         (es_reg): Updated.
1697         (PREFIX_VEX_38DB): Likewise.
1698         (PREFIX_VEX_3A4A): Likewise.
1699         (PREFIX_VEX_3A60): Likewise.
1700         (PREFIX_VEX_3ADF): Likewise.
1701         (VEX_LEN_3ADF_P_2): Likewise.
1702         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1703         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1704         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1705         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1706         PREFIX_VEX_3896...PREFIX_VEX_389F,
1707         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1708         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1709         (vex_table): Likewise.
1710         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1711         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1712         (putop): Support "%XW".
1713         (intel_operand_size): Handle vex_w_dq_mode.
1714
1715         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1716
1717         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1718         instructions.  Add new FMA instructions.
1719         * i386-tbl.h: Regenerated.
1720
1721 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1722
1723         * or32-opc.c (or32_print_register, or32_print_immediate,
1724         disassemble_insn): Don't rely on undefined sprintf behaviour.
1725
1726 For older changes see ChangeLog-2008
1727 \f
1728 Local Variables:
1729 mode: change-log
1730 left-margin: 8
1731 fill-column: 74
1732 version-control: never
1733 End: