1 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
3 * m10300-opc.c: Add entries for "no_match_operands" field in
7 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
9 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
13 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
15 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
18 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
20 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
22 * m10300-opc.c: Add autoincrement memory loads/stores.
26 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
28 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
32 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
35 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
37 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
38 @arch_cgen_get_int_operand.
39 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
40 Update call to @arch@_cgen_insert_operand.
41 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
42 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
43 (extract_insn_normal): New arg `pc', callers updated.
44 Update call to @arch@_cgen_extract_operand.
45 (print_insn): Update call to CGEN_EXTRACT_FN.
47 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
50 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
52 * m10300-opc.c: Fix load to sp and store from sp for the am33.
53 Add more multimedia instructions.
55 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
57 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
62 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
64 * mips-opc.c (pref): Enabled for the r5900.
67 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
69 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
71 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
73 (OP_J): Remove unnecessary subtraction when 16-bit displacement
77 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
79 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
82 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
84 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
85 from raw register #s to symbolic names to make debugging easier.
88 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
90 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
92 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
94 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
96 * Makefile.am (CGENDIR): Set via configure.
98 (CGENFILES): object.scm renamed to cos.scm.
99 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
100 (stamp-m32r): Pass prefix to run-cgen.
101 * Makefile.in: Regenerate.
102 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
103 * cgen-dis.in: Ditto.
104 * cgen-opc.in: Ditto.
105 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
106 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
107 * configure: Regenerate.
111 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
113 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
115 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
117 * m10300-opc.c: Reorder more instructions so that we do not
118 accidentally match a mn10300 instruction when we really
119 wanted an am33 instruction.
122 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
124 * m10300-dis.c: Only recognize instructions from the currently
126 * m10300-opc.c: Add field indicating the particular variant of
127 the mn10300 each instruction is available on.
129 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
131 * configure.in: For bfd_vax_arch, build vax-dis.lo.
132 * Makefile.am: Rebuild dependencies.
133 (CFILES): Add vax-dis.c.
134 (ALL_MACHINES): Add vax-dis.lo.
135 * aclocal.m4: Rebuild with current libtool.
136 * configure, Makefile.in: Rebuild.
138 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
140 * vax-dis.c: New file, from work by Pauline Middelink
141 <middelin@polyware.iaf.nl>.
142 * disassemble.c (ARCH_vax): Define if ARCH_all.
143 (disassembler): Add case for ARCH_vax.
144 * makefile.vms: Support compilation on vms/vax.
147 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
149 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
150 the DVP_OPERAND_RELOC_11_S4 relocation.
154 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
156 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
158 (disassemble): Correctly handle FMT_D10 instructions.
160 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
161 am33 shift instructions.
163 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
165 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
166 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
168 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
169 (mn10300_opcodes): Reorder so as to try and select opcodes from
170 the core chip when multiple alternatives exist. Change several
171 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
172 "macbu" instructions. Fix typos in a couple DSP instructions too.
175 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
177 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
178 related to sign extension and the size of ints.
180 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
182 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
183 instructions. Support (sp) addressing mode by expanding it into
187 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
189 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
190 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
191 be used as immediate values.
195 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
197 * m10300-opc.c: Support 4 byte DSP instructions.
200 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
202 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
205 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
207 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
210 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
212 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
215 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
217 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
218 found on the mn10300.
221 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
223 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
226 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
228 * mips-dis.c (print_insn_little_mips): Previously, instruction
229 printing references the symbol table to determine whether the
230 instruction resides in a block regular instructions or mips16
231 instructions. However, when the disassembler gets used in other
232 environments where the symbol table is not present, we no longer
233 rely in the symbol table, rather, use the low bit of the
234 instructions address to guess. There should be no change for usage
235 of the disassembler in host based programse, gdb ,objdump.
236 (print_insn_big_mips): ditto.
237 (print_insn_mips): ditto
239 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
241 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
243 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
246 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
247 operands for the am33.
248 (mn10300_opcodes): Add new instructions from the am33.
250 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
252 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
254 * i386-dis.c (index16): Add '%' to register names. Use ','
257 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
259 * i386-dis.c: Don't print opcode suffix when we can figure out the
260 size (and gas can!) by register operands, or from the default
262 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
264 (dis386, dis386_twobyte, grps): Use new suffix macros.
265 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
266 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
267 order of cmps operands to agree with Intel docs. Correct operand
268 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
269 agree with Intel docs.
270 (print_insn_x86): Print orphan fwait before other prefixes.
271 Return correct byte count for orphan fwait with prefixes. Don't
272 print `bound' operands in reverse order.
273 (ckprefix): Stop accumulating prefixes if we get fwait.
274 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
276 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
278 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
279 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
281 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
283 Fix problems when bfd_vma is wider than long.
284 * i386-dis.c: Make op_address and start_pc unsigned.
285 (set_op): Make parameter unsigned.
286 (print_insn_x86): Cast to bfd_vma when passing a value to
288 * ns32k-dis.c (CORE_ADDR): Don't define.
289 (print_insn_ns32k): Change type of addr to bfd_vma. Use
290 bfd_scan_vma to read back address.
291 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
293 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
294 (NEXTULONG): New definition.
295 (print_insn_m68k): Avoid overflow when computing third argument of
297 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
298 Use disp instead of val to store offset values.
299 (print_indexed): Use base_disp instead of word to store base
300 displacement, to avoid overflow.
301 * m10300-dis.c (disassemble): Cast value to long when computing
302 pc-relative address, to get correct sign extension.
304 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
306 * m32r-opc.c: Regenerate.
308 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
310 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
311 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
313 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
315 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
317 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
319 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
321 (OP_DSreg): Rename from OP_DSSI.
322 (OP_ESreg): Rename from OP_ESDI.
323 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
325 (append_seg): Rename from append_prefix.
326 (ptr_reg): New function.
327 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
329 (PREFIX_ADDR): Rename from PREFIX_ADR.
330 (float_reg): Add non-broken opcodes for people who don't want
333 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
335 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
338 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
340 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
342 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
344 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
345 0; produce error message for shifts of size 32 (or 64 for 64-bit
346 shifts), because the hardware doesn't support them.
349 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
351 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
354 * vu0.h (sqc2): Fix opcode.
356 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
360 start-sanitize-vr5400
361 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
363 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
364 Change pinfo to use WR_HILO.
367 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
369 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
370 LONG_2, LONG_2b formats to use this new operand.
372 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
374 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
376 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
378 * sparc-dis.c (print_insn_sparc): big endian instruction / little
381 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
383 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
384 and SHORT_B3b formats to use Rb instead of Ra.
386 Add FLAG_MUL16 to MUL2XH opcode.
388 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
389 to existing 1.1.1 parallelisation prohibition procedure.
391 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
393 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
394 * cgen-dis.in (extract_normal): Likewise.
395 * m32r-asm.c,m32r-dis.c: Regenerate.
398 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
400 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
404 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
406 * mips-opc.c (multu1): Add two operand variant for the r5900.
409 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
411 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
412 with a shift count of 0.
415 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
417 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
419 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
421 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
422 (_print_insn_mips): Likewise.
423 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
427 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
429 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
430 (cgen_hw_lookup_by_num): New function.
433 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
436 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
438 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
440 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
442 * sparc-dis.c (print_insn_sparc): Always fetch instructions
443 as big-endian on SPARClite.
446 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
448 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
450 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
454 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
456 * d30v-opc.c (pre_defined_register): Remove alias for r0.
459 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
461 * mips-opc.c (break): Added 20-bit single-operand break
462 instruction for R5900 only.
465 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
467 * po/Make-in (install-info): New target.
469 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
471 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
472 * configure: Rebuild.
474 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
476 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
477 variety of ISA2 instructions to set bottom ten bits of trap code.
479 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
481 * Makefile.am (config.status): Add explicit target so that
482 config.status depends upon bfd/configure.in.
483 * Makefile.in: Rebuild.
485 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
487 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
488 instructions to set bottom ten bits of break code.
489 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
490 for above optional argument.
492 start-sanitize-cygnus
493 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
495 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
496 * m32r-opc.h: Regenerate.
499 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
501 * makefile.vms: Run dec c with /nodebug.
503 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
505 * Makefile.in: Rebuilt.
506 * Makefile.am: Regenerated dependencies with mkdep.
508 * opintl.h (_): Define as dgettext.
510 start-sanitize-cygnus
511 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
513 * configure.in: Add support for --enable-cgen-maint.
514 * Makefile.am (M32R_DEPS): New variable.
515 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
516 * aclocal.m4: Regenerate.
517 * Makefile.in: Regenerate.
518 * configure: Regenerate.
520 * Makefile.am (CGENFILES): Add minsn.scm.
523 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
525 * cgen-asm.c: Internationalised.
526 start-sanitize-cygnus
527 * cgen-asm.in: Internationalised.
528 * cgen-opc.in: Internationalised.
530 * m32r-asm.c: Internationalised.
531 * m32r-dis.c: Internationalised.
532 * m32r-opc.c: Internationalised.
534 * aclocal.m4: Regenerated.
535 * configure: Regenerated.
536 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
537 * Makefile.in: Rebuild.
538 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
539 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
541 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
543 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
545 * aclocal.m4, configure: Rebuild with current tools.
547 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
549 * opintl.h: New file - contains internationalisation macros used
550 by source files in this directory.
551 * po/: New subdirectory - contains internationalisation files.
552 * po/Make-in: New file - Makefile constructor.
553 * po/POTFILES.in: New file - list of files in opcodes directory
554 that should be scan for internationalisation macros.
555 * po/opcodes.pot: New file - list of internationisation strings
556 found in files mentioned in po/POTFILES.in.
557 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
558 entry. Add intl directory to include paths.
559 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
560 HAVE_STRCPY, HAVE_LC_MESSAGES
561 * configure.in: Add rule to build Makefile in po subdirectory.
562 * Makefile.in: Rebuilt.
563 * aclocal.m4: Rebuilt.
564 * config.in: Rebuilt.
565 * configure: Rebuilt.
566 * alpha-opc.c: Internationalised.
567 * arc-dis.c: Internationalised.
568 * arc-opc.c: Internationalised.
569 * arm-dis.c: Internationalised.
570 * cgen-asm.c: Internationalised.
571 * d30v-dis.c: Internationalised.
572 * dis-buf.c: Internationalised.
574 * dvp-dis.c: Internationalised.
575 * dvp-opc.c: Internationalised.
577 * h8300-dis.c: Internationalised.
578 * h8500-dis.c: Internationalised.
579 * i386-dis.c: Internationalised.
580 * m10200-dis.c: Internationalised.
581 * m10300-dis.c: Internationalised.
582 * m68k-dis.c: Internationalised.
583 * m88k-dis.c: Internationalised.
584 * mips-dis.c: Internationalised.
585 * ns32k-dis.c: Internationalised.
586 * opintl.h: Internationalised.
587 * ppc-opc.c: Internationalised.
588 * sparc-dis.c: Internationalised.
589 * v850-dis.c: Internationalised.
590 * v850-opc.c: Internationalised.
592 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
594 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
595 (asm_hash_table_entries): New variable.
596 (cgen_asm_init): Free asm_hash_table_entries.
597 (hash_insn_array,hash_insn_list): New functions.
598 (build_asm_hash_table): Use them. Hash macro insns as well.
599 (cgen_asm_lookup_insn): Update.
600 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
601 (dis_hash_table_entries): New variable.
602 (cgen_dis_init): Free dis_hash_table_entries.
603 (hash_insn_array,hash_insn_list): New functions.
604 (build_dis_hash_table): Use them. Hash macro insns as well.
605 (cgen_dis_lookup_insn): Update.
606 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
607 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
608 (cgen_macro_insn_count): New function.
609 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
610 All callers updated. Sanity check result of extract fn.
611 (@arch@_cgen_get_insn_operands): Change result type to void.
612 Delete args insn_value, length. New arg fields. All callers updated.
613 (@arch@_cgen_lookup_get_insn_operands): New function.
614 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
616 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
618 * i386-dis.c (OP_DSSI): Print segment override.
621 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
623 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
627 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
629 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
633 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
635 * vu0.h (vlqd, vlqi): Update per revised specs.
639 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
641 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
642 (vif_operands): Update.
643 (vif_get_unpackloc): Delete.
644 (state_vif_unpackloc{,_star_p}): Delete.
645 (dvp_opcode_init_parse): Update.
646 (vif_unpack_len_value): Avoid divide by zero.
650 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
652 * vu0.h: Specs changed for VCALLMSR bit pattern.
653 * mips-dis.c: (print_insn_arg) Matching change.
656 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
658 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
661 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
663 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
664 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
665 * configure.in: Define and substitute WIN32LDFLAGS and
667 * aclocal.m4: Rebuild with new libtool.
668 * configure, Makefile.in: Rebuild.
671 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
673 * vu0.h: Corrected bit pattern for VMAXI opcode.
676 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
678 * m32r-opc.c: Regenerate.
681 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
683 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
684 (dvp_expand_macro): Implement.
685 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
686 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
689 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
691 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
692 before trying to copy it.
693 * Makefile.in: Rebuild.
695 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
697 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
700 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
702 * m32r-opc.c: Fix bit patterns for SAT and SATB.
705 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
707 * ns32k-dis.c (bit_extract_simple): New function to extract bits
708 from an arbitrary valid buffer instead of fetching them on demand
710 (invalid_float): use bit_extract_simple() instead of bit_extract().
713 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
715 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
716 * m32r-opc.h: Add extra control registers.
719 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
721 From H.J. Lu <hjl@gnu.org>:
722 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
725 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
727 * Branched binutils 2.9.
729 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
731 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
732 disassembling last 4 bytes of a section.
734 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
736 Fix some gcc -Wall warnings:
737 * arc-dis.c (print_insn): Add casts to avoid warnings.
738 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
739 * d10v-dis.c (dis_long, dis_2_short): Likewise.
741 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
742 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
743 (parse_bc, parse_vfreg, parse_accdest): Likewise.
744 (parse_ffstreg, parse_vif_mode): Likewise.
746 * m10200-dis.c (disassemble): Likewise.
747 * m10300-dis.c (disassemble): Likewise.
748 * ns32k-dis.c (print_insn_ns32k): Likewise.
749 * ppc-opc.c (insert_ral, insert_ram): Likewise.
750 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
751 * cgen-opc.c (cgen_keyword_search_next): Likewise.
752 * d10v-dis.c (dis_long, dis_2_short): Likewise.
753 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
755 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
756 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
757 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
759 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
761 * tic80-dis.c (print_one_instruction): Likewise.
763 * w65-dis.c (print_operand): Likewise.
764 * z8k-dis.c (fetch_data): Likewise.
765 * a29k-dis.c: Add return type for find_byte_func_type.
766 * arc-opc.c: Include <stdio.h>. Remove declarations of
767 insert_multshift and extract_multshift.
768 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
770 (extract_value): Fully parenthesize expression.
772 * dvp-opc.c: Include <ctype.h>.
773 (print_sdest): Add default case to switch.
775 * h8500-dis.c (print_insn_h8500): Initialize local variables.
776 * h8500-opc.h (h8500_table): Fully bracket initializer.
777 * w65-opc.h (optable): Likewise.
778 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
779 * i386-dis.c (OP_E): Initialize local variables.
780 * m10200-dis.c (print_insn_mn10200): Likewise.
781 * mips-dis.c (print_insn_mips16): Likewise.
782 * sh-dis.c (print_insn_shx): Likewise.
783 * v850-dis.c (print_insn_v850): Likewise.
784 * ns32k-dis.c (print_insn_arg): Declare.
785 (get_displacement, invalid_float): Declare.
786 (list_search, sign_extend, flip_bytes): Declare return type.
787 (get_displacement): Likewise.
788 (print_insn_arg): Likewise. Make d int. Fix sprintf format
790 (print_insn_ns32k): Make i unsigned.
791 (invalid_float): Make static. Declare type of val.
792 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
793 on each for iteration.
794 * tic30-dis.c (get_indirect_operand): Likewise.
795 * z8k-dis.c (print_insn_z8001): Declare return type.
796 (print_insn_z8002): Likewise.
797 (unparse_instr): Fix sprintf format strings.
799 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
801 * mips-opc.c: Add "sync.l" and "sync.p".
804 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
806 * dvp-opc.c (extract_vif_datalen): Rewrite.
807 (vif_insn_len): Perform 0->max+1 conversion for direct length.
809 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
811 * dvp-dis.c (print_insn): Print unpack address in hex.
812 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
813 Don't skip over '*', just record it.
814 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
815 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
816 Don't skip over '*', just record it.
817 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
818 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
819 (vif_opcodes): Likewise.
820 (state_vif_{mpg,unpack}loc_star_p): New static locals.
821 (vif_macros,vif_macro_count): New globals.
822 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
823 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
824 (vif_get_wl_cl): New function.
825 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
828 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
830 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
831 default m68k variant to recognize.
833 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
834 (ctrl, cobr, mem, ea): Likewise.
835 (print_addr): Likewise. Remove cast.
836 (ea): Cast argument of print_addr to bfd_vma.
838 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
840 (cgen_parse_unsigned_integer): Likewise.
841 (cgen_parse_address): Likewise.
843 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
845 * i960-dis.c (ctrl): Add full braces to structure initialization.
846 (cobr, mem, reg): Likewise.
847 (ea): Correct parenthesization in expression.
849 * cgen-asm.c: Include <ctype.h>.
850 (build_asm_hash_table): Remove unused local variable i.
851 (cgen_parse_keyword): Add casts to avoid warnings.
853 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
854 symbol. Fix indentation.
855 (print_insn_little_arm): Likewise.
858 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
860 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
865 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
867 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
872 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
874 * dvp-opc.c (vif_operand_datalen_special): New global.
878 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
880 * vu0.h (vcallms): Use 'O' for call target operand.
881 * mips-dis.c (print_insn_arg): Handle 'O'.
884 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
886 * configure.in: Use AM_DISABLE_SHARED.
887 * aclocal.m4, configure: Rebuild with libtool 1.2.
890 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
892 * mips-dis.c: Change '%' to '#' in r5900 support.
896 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
898 These patches are courtesy of Jonathan Walton and Tony Thompson
899 (athompso@cambridge.arm.com).
901 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
904 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
905 both the offset and the label closest to the destination.
908 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
910 * vu0.h: New file with cop2/vu0 instructions.
911 * mips-opc.c: Include vu0.h.
912 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
914 (print_insn_mips): Do not emit a tab after an instruction if the
915 first arg is an instruction completer (&). If the next arg is an
916 escape character (%), then print the next arg verbatim.
917 * Makefile.am (mips-opc.lo): Depend on vu0.h
921 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
923 * dvp-opc.c (vif_opcodes): Add stcycl.
925 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
927 * dvp-dis.c (print_dma): Change length from 16 to 8.
930 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
932 * m32r-opc.h: Regenerate.
935 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
937 * dvp-opc.c (print_dest1): Print dest spec again.
938 (print_vfreg,print_accdest): Likewise.
939 (vif_unpack_len): Round result up to word boundary.
942 start-sanitize-vr4320
943 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
945 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
947 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
949 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
954 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
956 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
957 (print_insn): Do mask comparison on proper opcode word.
958 Print unsigned values in hex.
959 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
960 (parse_bc): Catch missing dest.
961 (parse_vfreg): Replace atoi call with strtol.
962 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
963 (parse_bcftreg,parse_ffstreg): Handle missing dest.
964 (extract_gif_eop): New function.
965 (gif_operands): Update eop entry.
966 (VGIFOP,VGIFNREGS): Fix calcs.
967 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
968 (gif_regs): Add entry for unused 11 case.
969 (print_gif_regs): Print empty list instead of nothing.
970 (extract_gif_nloop): Fix value calc.
971 (print_gif_nloop): Always print value, even if 0.
972 (insert_vif_wlcl,extract_vif_wlcl): New functions.
973 (vif_operands): Use them for wl,cl fields.
974 (state_vif_wl,state_vif_cl): New static locals.
975 (parse_vif_mode): Handle numeric args.
976 (vif_unpack_len_value,vif_unpack_len): New functions.
977 (vif_insn_len): Call vif_unpack_len.
980 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
982 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
984 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
986 * cgen-asm.in: Move insertion of generated routines to top of file.
987 (insert_normal): Add prototype. Delete `shift' arg.
988 * cgen-dis.in: Move insertion of generated routines to top of file.
989 (extract_normal): Add prototype. Delete `shift' arg.
990 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
991 (print_keyword): Add prototype. Fix type of `attrs' arg.
993 start-sanitize-vr4320
994 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
996 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
997 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1000 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1002 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1003 assume that info->symbols is non-empty.
1005 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1007 * alpha-opc.c (cvtqs) There is no such thing.
1008 (cvttq): Missing most of the /*d variants.
1010 start-sanitize-r5900
1011 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1013 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1015 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1016 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1019 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1021 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1022 delayed branches or jumps.
1025 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1027 * dvp-opc.c (vif_operands): Add unpack[u] support.
1028 (vif_opcodes): Ditto.
1029 (*_vif_imrubits): Renamed from *_vif_imrbits.
1031 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1033 * dvp-dis.c (print_insn): Handle word number.
1034 Handle mips address vs vu address.
1035 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1036 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1037 ({insert,extract}_dma_addr): Fix word ofset.
1038 ({insert,print}_gif_regs): Fix encode/decode.
1041 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1043 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1045 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1046 * tic30-dis.c (print_branch): Likewise.
1048 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1049 * dvp-dis.c (dvp_info_mach_type): New function.
1050 (print_insn_dvp): Call it.
1051 (print_vif): Return length of 4 if mpg or direct insn so following
1052 insns get properly disabled.
1053 (print_gif): Fix word order.
1054 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1055 (gif_operands): Fix word order.
1056 (gif_opcodes): Likewise.
1057 ({insert,extract,print}_gif_regs): Likewise.
1058 (gif_regs): Add new register number/name changes.
1059 (dma_opcodes): Add dmarefe insn.
1062 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1064 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1065 saved_symbol code as it is no longer needed.
1067 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1069 * cgen-asm.c: Include symcat.h.
1070 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1072 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1075 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1077 * dvp-opc.c (extra_dma_flags): Fix typos.
1078 (dma_operands): Fix word numbers.
1079 (dma_opcodes): Likewise.
1080 ({insert,extract}_dma_flags): Likewise.
1083 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1085 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1088 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1090 * dvp-dis.c (print_gif): Complete.
1091 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1092 (state_gif_{nregs,regs,nloop}): New static locals.
1093 (*_gif_*): Complete.
1094 (dvp_opcode_init_{parse,print}): Init gif state locals.
1095 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1096 (vif_insn_len): Handle `unpack'.
1097 ({insert,extract}_dma_flags): Complete.
1100 start-sanitize-r5900
1101 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1103 * mips-opc.c (mula.s): Renamed from multa.s.
1106 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1108 * m32r-opc.[ch]: Regenerate.
1111 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1113 * dvp-opc.c (dma_operands): Rewrite.
1114 (dma_operand_{count,addr}): New globals.
1115 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1116 (insert_dma_addr): Insert value into insn.
1117 (extract_dma_addr): Extract value from insn.
1119 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1121 * dvp-dis.c (print_vu): Handle loi insns.
1122 (print_insn): Likewise.
1123 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1124 (vu_operands): Make LDEST1 a FAKE operand.
1125 (parse_dest1): Allow elided argument.
1126 (print_dest1): Don't print the argument.
1128 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1130 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1131 (print_vfreg): Don't print dest spec.
1132 (parse_accdest): Dest spec is optional.
1133 (print_accdest): Don't print dest spec.
1136 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1138 * Makefile.am (CGENFILES): Update.
1139 * Makefile.in: Regenerate.
1140 * cgen-asm.in (insert_normal): Result is error message now.
1141 Validate value to be inserted.
1142 (insert_insn_normal): Result is error message now.
1143 (@arch@_cgen_assemble_insn): Update.
1144 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1145 arguments. Don't perform validation here.
1146 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1148 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1150 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1151 operand instance list.
1152 * m32r-opc.c: Regenerate.
1154 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1156 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1157 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1159 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1161 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1163 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1165 * configure.in: Get the version number from BFD.
1166 * configure: Rebuild.
1168 From H.J. Lu <hjl@gnu.org>:
1169 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1170 * Makefile.in: Rebuild.
1172 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1174 * m32r-opc.c: Regenerate.
1175 * m32r-opc.h: Regenerate.
1177 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1179 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1180 Ignore ALIAS insns if asked to.
1181 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1182 * m32r-opc.c: Regenerate.
1185 * dvp.opc.c: Nicely format opcode tables.
1186 (vu_operands): New element UFLAGS.
1187 (parse_uflags,print_uflags): New functions.
1188 (vu_upper_opcodes): Add UFLAGS to all insns.
1191 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1193 Fix rac to accept only a0:
1194 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1195 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1196 Introduce OPERAND_GPR.
1197 * d10v-dis.c (print_operand): Likewise.
1199 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1201 * cgen-opc.in: New file.
1202 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1203 * Makefile.am (CGENFILES): Add cgen-opc.in.
1204 * Makefile.in: Regenerate.
1206 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1207 (cgen_hw_lookup): Make result const.
1209 * cgen-dis.in (*): Use PTR instead of void *.
1210 (print_insn): Delete unused vars `i', `syntax'.
1212 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1215 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1217 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1218 (vif_opcodes): Update renamed insns.
1219 * dvp-dis.c (*): Likewise.
1222 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1224 * configure, aclocal.m4: Rebuild with new libtool.
1226 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1228 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1229 instructions use a PC relative branch, not absolute.
1231 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1233 * configure.in: Set libtool_enable_shared rather than
1234 libtool_shared. Remove diversion hack.
1235 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1237 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1239 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1240 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1242 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1244 * tic30-dis.c: New file.
1245 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1246 * configure.in: Handle bfd_tic30_arch.
1247 * Makefile.am: Rebuild dependencies.
1248 (CFILES): Add tic30-dis.c
1249 (ALL_MACHINES): Add tic30-dis.lo.
1250 * configure, Makefile.in: Rebuild.
1252 start-sanitize-m32rx
1253 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1255 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1256 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1257 macwhi-a and macwlo-a instructions.
1261 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1263 * dvp-opc.c, fixed encoding of a bunch of instructions to
1264 be consistent with the asmvu assembler (and inconsistent
1265 with the specification).
1267 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1269 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1270 in the opcode table. The pkemscalf instruction must come first.
1272 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1274 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1277 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1279 * m32r-opc.h (HAVE_CPU_M32R): Define.
1282 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1284 * dvp-dis.c, dvp-opc.c: New files.
1285 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1286 * configure: Regenerate.
1287 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1288 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1289 (mips-dis.lo): Compile with @archdefs@.
1290 * Makefile.in: Regenerate.
1291 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1292 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1295 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1297 * v850-opc.c (insertion routines): If both alignment and size is
1298 wrong then report this.
1300 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1302 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1303 Only recognize instructions for the current target_processor.
1305 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1307 * d10v-dis.c (PC_MASK): Correct value.
1308 (print_operand): If there's a reloc, don't calculate the
1309 address because they could be in different sections.
1311 start-sanitize-cygnus
1312 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1314 * cgen.sh: Rewrite to be like simulator's version.
1315 * Makefile.am (cgen): Update call to cgen.sh.
1316 * Makefile.in: Regenerate
1319 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1321 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1322 instruction after the 4650's "mul" instruction; nobody's using the
1323 4010 these days. If object files someday indicate which processor
1324 variant they're intended for, we can do a better job at this.
1326 start-sanitize-r5900
1327 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1329 * mips-opc.c (c.lt.s): Add r5900 variant.
1333 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1335 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1336 table provided entry size. Use CGEN_INSN_MNEMONIC.
1337 (cgen_parse_keyword): Rewrite.
1338 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1339 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1340 * cgen-opc.c: Clean up pass over `struct foo' usage.
1341 (cgen_keyword_lookup_value): Handle "" entry.
1342 (cgen_keyword_add): Likewise.
1343 start-sanitize-cygnus
1344 * Makefile.am: Add cgen support.
1345 * Makefile.in: Regenerate.
1346 * configure.in: Add cgen support.
1347 * configure: Regenerate.
1348 * aclocal.m4: Regenerate.
1349 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1352 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1354 * mips-opc.c: Add FP_D to s.d instruction flags.
1356 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1358 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1360 start-sanitize-tic80
1361 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1363 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1364 PC relative offset forms before the 15 bit forms. An assembler command
1365 line option now chooses the default.
1368 start-sanitize-r5900
1369 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1371 * mips-opc.c: Add many missing r5900 instructions.
1374 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1376 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1377 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1379 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1381 * configure: Only build libopcodes shared if --enable-shared's value
1382 was `yes', or was set to `*opcodes*'.
1383 * aclocal.m4: Likewise.
1384 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1385 original source of this bit of code. It's not clear what the best fix
1388 start-sanitize-r5900
1389 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1391 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1393 start-sanitize-tic80
1394 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1396 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1397 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1398 offset forms before the 15 bit forms, to default to the long forms.
1401 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1403 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1405 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1407 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1408 symbol if none is present.
1409 (print_insn_big_arm): Prevent examination of stored symbol if
1412 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1414 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1416 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1418 * disassemble.c: Remove disasm_symaddr() function.
1420 * arm-dis.c: Use info->symbol instead of info->flags to determine
1421 if disassmbly should be in Thumb or Arm mode.
1423 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1425 * arm-dis.c: Add support for disassembling Thumb opcodes.
1426 (print_insn_thumb): New function.
1428 * disassemble.c (disasm_symaddr): New function.
1430 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1431 (thumb_opcodes): Table of Thumb opcodes.
1433 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1435 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1437 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1438 and 'v' as operand types.
1440 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1442 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1443 <olivier.carmona@di.epfl.ch>.
1444 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1445 which has a two word opcode with a one word argument.
1447 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1449 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1450 unsigned, not signed.
1451 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1453 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1455 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1456 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1457 (ftrv): Slay the cut-and-paste monster.
1459 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1461 * d10v-dis.c (print_operand):
1462 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1464 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1466 * d10v-opc.c (OPERAND_FLAG): Split into:
1467 (OPERAND_FFLAG, OPERAND_CFLAG) .
1471 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1473 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1474 field for all INSN_MACRO's.
1475 * mips16-opc.c: same
1477 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1479 * mips-opc.c (sync,cache): These are 3900 insns.
1481 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1483 sh-opc.h (sh_table): Remove ftst/nan.
1485 start-sanitize-vr5400
1486 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1488 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1489 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1491 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1495 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1497 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1498 Add tx49 insns and configury.
1501 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1503 * mips-opc.c (ffc, ffs): Fix mask.
1505 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1507 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1510 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1512 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1513 start-sanitize-vr5400
1514 Added VR5400 instructions.
1515 (N5): New cpu-id macro.
1517 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1519 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1521 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1522 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1524 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1526 * v850-dis.c (disassemble): Replace // with /* ... */
1528 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1530 * sparc-opc.c: Add wr & rd for v9a asr's.
1531 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1532 (v9a_asr_reg_names): New variable.
1533 Patch from David Miller <davem@vger.rutgers.edu>.
1535 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1537 * sparc-opc.c (v9notv9a): New insn type.
1538 (IMPDEP): Move to the end to not conflict with edge8 et al.
1539 Patch from David Miller <davem@vger.rutgers.edu>.
1541 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1543 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1545 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1547 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1549 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1551 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1552 of disassemble_info structure to determine if an overlay address
1553 has a matching symbol in low memory.
1555 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1556 new symbol_at_address_func field in disassemble_info structure.
1558 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1560 * v850-opc.c (extract_d22): Use signed arithmatic.
1562 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1564 * mips-opc.c: Three op mult is not an ISA insn.
1566 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1568 * mips-opc.c: Fix formatting.
1570 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1572 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1573 than assuming that char is signed. Explicitly sign extend 16 bit
1574 values, rather than assuming that short is 16 bits.
1575 (OP_sI, OP_J, OP_DIR): Likewise.
1577 start-sanitize-v850e
1578 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1580 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1584 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1586 * v850-opc.c: Fix typo in comment.
1588 * v850-dis.c (disassemble): Add test of processor type when
1589 determining opcodes.
1591 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1593 * configure.in: Use a diversion to set enable_shared before the
1594 arguments are parsed.
1595 * configure: Rebuild.
1597 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1599 * m68k-opc.c (TBL1): Use ! rather than `.
1600 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1602 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1604 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1606 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1608 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1611 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1612 * aclocal.m4: Rebuild with new libtool.
1613 * configure: Rebuild.
1615 start-sanitize-v850e
1616 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1618 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1621 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1623 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1625 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1627 * v850-opc.c (v850_opcodes): Further rearrangements.
1629 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1631 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1633 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1635 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1638 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1640 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1642 * mips16-opc.c: Added mips16 sdbbp.
1645 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1647 * v850-opc.c: Initialise processors field of v850_opcode structure.
1649 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1651 Merge changes from Martin Hunt:
1653 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1655 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1656 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1657 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1659 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1661 * d30v-dis.c (print_insn): First operand of d*i (delayed
1662 branch) instructions is relative.
1664 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1665 (d30v_operand_table): Add IMM6S3 type.
1666 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1668 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1669 and cmp instructions.
1671 * d30v-opc.c: Correct entries for repeat*, and sat*.
1672 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1673 types. Correct several formats.
1675 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1677 * d30v-opc.c (pre_defined_registers): Change control registers.
1679 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1680 SHORT_C2. Manual was incorrect.
1682 * d30v-dis.c (lookup_opcode): Return value now indicates
1683 if an opcode has a short and a long form. Used for deciding
1684 to append a ".s" or ".l".
1685 (print_insn): Append a ".s" to an instruction if it is
1686 the short form and ".l" if it is a long form. Do not append
1687 anything if the instruction has only one possible size.
1689 * d30v-opc.c: Change mulx2h to require an even register.
1690 New form: SHORT_A2; a SHORT_A form that needs an even
1691 register as the first operand.
1693 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1694 instruction was not being disassembled if there were an odd
1695 number of instructions.
1697 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1699 start-sanitize-v850e
1700 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1702 * v850-dis.c (disassemble): Improved display of register lists.
1705 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1707 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1708 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1709 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1710 fandnot1s, fandnot2s.
1712 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1714 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1716 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1718 * cgen-asm.c (cgen_parse_address): New argument resultp.
1719 All callers updated.
1720 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1722 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1724 * mn10200-dis.c (disassemble): PC relative instructions are
1725 relative to the next instruction, not the current instruction.
1727 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1729 * v850-dis.c (disassemble): Only signed extend values that are not
1730 returned by extract functions.
1731 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1733 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1735 * v850-opc.c: Update comments. Remove use of
1736 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1738 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1740 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1742 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1744 * configure: Rebuilt with latest devo autoconf for NT support.
1746 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1748 * v850-dis.c (disassemble): Use curly brace syntax for register
1751 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1752 where r0 is being used as a destination register.
1754 start-sanitize-v850e
1755 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1757 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1760 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1762 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1763 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1764 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1765 Add insns to access SGR and DBR.
1766 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1768 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1770 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1772 start-sanitize-v850e
1773 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1775 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1776 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1779 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1781 * configure (cgen_files): Add support for v850e target.
1782 * configure.in (cgen_files): Add support for v850e target.
1784 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1786 * configure (cgen_files): Add support for v850ea target.
1787 * configure.in (cgen_files): Add support for v850ea target.
1790 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1792 * configure.in (bfd_arc_arch): Add.
1793 * configure: Rebuild.
1794 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1795 * Makefile.in: Rebuild.
1796 * arc-dis.c, arc-opc.c: New files.
1797 * disassemble.c (ARCH_all): Define ARCH_arc.
1798 (disassembler): Add ARC support.
1800 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1802 start-sanitize-v850e
1803 * v850-dis.c (disassemble): Add support for v850EA instructions.
1805 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1806 (v850_opcodes): Add v850EA instructions.
1808 * v850-dis.c (disassemble): Add support for v850E instructions.
1810 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1811 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1812 insert_spe, extract_spe): New Functions.
1813 (v850_opcodes): Add v850E instructions.
1816 * v850-opc.c: Reorganised and re-layed out to improve readability
1819 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1821 * configure: Rebuild with autoconf 2.12.1.
1823 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1825 * aclocal.m4, configure: Rebuild with new automake patches.
1827 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1829 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1830 * acinclude.m4: Just include acinclude.m4 from BFD.
1831 * aclocal.m4, configure: Rebuild.
1833 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1835 * Makefile.am: New file, based on old Makefile.in.
1836 * acconfig.h: New file.
1837 * acinclude.m4: New file.
1838 * stamp-h.in: New file.
1839 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1840 Removed shared library handling; now handled by libtool. Replace
1841 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1842 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1843 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1844 handling in AC_OUTPUT.
1845 * dep-in.sed: Change .o to .lo.
1846 * Makefile.in: Now built with automake.
1847 * aclocal.m4: Now built with aclocal.
1848 * config.in, configure: Rebuild.
1850 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1852 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1854 start-sanitize-r5900
1855 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1857 * mips-opc.c: Fix coding of mtsa.
1860 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1862 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1864 * sparc-dis.c (sorted_opcodes): New static local.
1865 (struct opcode_hash): `opcode' is pointer to const element.
1866 (build_hash): First arg is now table of sorted pointers.
1867 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1868 (compare_opcodes): Update.
1870 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1872 * cgen-opc.c: #include <ctype.h>.
1873 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1874 Handle case insensitive hashing.
1875 (hash_keyword_value): Change type of `value' to unsigned int.
1877 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1879 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1880 precision FP, mark it as such. Likewise for double precision
1881 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1883 start-sanitize-r5900
1884 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1887 start-sanitize-r5900
1888 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1890 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1891 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1894 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1896 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1898 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1899 nesting depth when all the macros are expanded.
1901 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * sparc-opc.c: The fcmp v9a instructions take an integer register
1904 as a destination, not a floating point register. From Christian
1905 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1907 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1910 syntax. From Roman Hodek
1911 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1913 * i386-dis.c (twobyte_has_modrm): Fix pand.
1915 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1917 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1919 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1921 * arm-dis.c: Add prototypes for arm_decode_shift and
1924 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1926 * mips-opc.c: Add r3900 insns.
1928 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1930 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1931 print delay slot instructions on the same line. When using a PC
1932 relative load, add a comment with the value being loaded if it can
1935 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1937 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1938 to pushS/popS for segment regs and byte constant so that
1939 pushw/popw printed when in 16 bit data mode.
1941 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1942 print cbtw, cwtd in 16 bit data mode.
1943 * i386-dis.c (putop): extra case W to support above.
1945 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1946 address size prefix in 16 bit address mode.
1948 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1950 * sh-dis.c: Reindent. Rename local variable fprintf to
1953 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1955 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1957 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1959 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1961 * mips16-opc.c (mip16_opcodes): same.
1963 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1965 * m68k-opc.c (moveb): Change $d to %d.
1967 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1970 (twobyte_has_modrm): Likewise.
1972 (OP_MMX, OP_EM, OP_MS): New static functions.
1974 * i386-dis.c: Revert patch of April 4. The output now matches
1977 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1979 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1982 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1984 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1986 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1988 * Makefile.in (install): Depend upon installdirs.
1989 (installdirs): New target.
1991 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1993 From Thomas Graichen <graichen@rzpd.de>:
1994 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1995 * configure: Rebuild.
1997 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1999 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2000 Delete string{,s}.h support.
2002 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2004 * cgen-asm.c (cgen_parse_operand_fn): New global.
2005 (cgen_parse_{{,un}signed_integer,address}): Update call to
2006 cgen_parse_operand_fn.
2007 (cgen_init_parse_operand): New function.
2008 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2009 from cgen_asm_init_parse.
2010 (m32r_cgen_assemble_insn): New operand `errmsg'.
2011 Delete call to as_bad, return error message to caller.
2012 (m32r_cgen_asm_hash_keywords): #if 0 out.
2014 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2016 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2018 [case 'J']: Fix typo in register name.
2020 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2022 * configure.in: Substitute SHLIB_LIBS.
2023 * configure: Rebuild.
2024 * Makefile.in (SHLIB_LIBS): New variable.
2025 ($(SHLIB)): Use $(SHLIB_LIBS).
2027 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2029 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2031 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2033 * disassemble.c (disassembler): Handle m32r.
2035 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2037 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2038 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2039 * Makefile.in (CFILES): Add them.
2040 (ALL_MACHINES): Add them.
2041 (dependencies): Regenerate.
2042 * configure.in (cgen_files): New variable.
2043 (bfd_m32r_arch): Add entry.
2044 * configure: Regenerate.
2046 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2048 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2049 * configure: Rebuild.
2051 * Makefile.in: Rebuild dependencies.
2053 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2055 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2058 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2060 * Branched binutils 2.8.
2062 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2064 * m10200-dis.c: Rename from mn10200-dis.c.
2065 * m10200-opc.c: Rename from mn10200-opc.c.
2066 * m10300-dis.c: Rename from mn10300-dis.c
2067 * m10300-opc.c: Rename from mn10300-opc.c.
2068 * Makefile.in: Update accordingly.
2070 * mips16-opc.c: Add mul and dmul macros.
2072 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2074 * makefile.vms: Update CFLAGS, add clean target.
2076 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2078 * mips-opc.c: Add "wait". From Ralf Baechle
2079 <ralf@gnu.ai.mit.edu>.
2081 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2082 * configure, config.in: Rebuild.
2083 * sysdep.h: Include <stdlib.h> if it exists.
2084 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2086 * Makefile.in: Rebuild dependencies.
2088 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2090 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2091 Andrew Bray <andy@madhouse.demon.co.uk>.
2093 * mips-opc.c: Add cast when setting mips_opcodes.
2095 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2097 * v850-dis.c (disassemble): Fix sign extension problem.
2098 * v850-opc.c (extract_d*): Fix sign extension problems to make
2099 disassembly calculate branch offsets correctly.
2101 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2103 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2105 * mips-opc.c: Add dctr and dctw.
2107 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2109 * d30v-dis.c (print_insn): Change the way signed constants
2112 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2114 * Makefile.in (BFD_H): New variable.
2115 (HFILES): New variable.
2116 (CFILES): Add all C files.
2117 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2118 Delete old dependencies, and build new ones.
2119 * dep-in.sed: New file.
2121 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2123 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2125 start-sanitize-coldfire
2126 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2128 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2131 end-sanitize-coldfire
2132 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2134 * mn10200-opc.c: Change "trap" to "syscall".
2135 * mn10300-opc.c: Add new "syscall" instruction.
2137 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2139 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2140 mulul insns on the coldfire.
2142 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2144 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2145 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2146 (print_insn_little_arm): Likewise.
2148 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2150 Based on patches from H.J. Lu <hjl@lucon.org>:
2151 * i386-dis.c (fetch_data): Add prototype.
2152 * m68k-dis.c (fetch_data): Add prototype.
2153 (dummy_print_address): Add prototype. Make static.
2154 * ppc-opc.c (valid_bo): Add prototype.
2155 * sparc-dis.c (build_hash_table): Add prototype.
2156 (is_delayed_branch, compute_arch_mask): Add prototypes.
2157 (print_insn_sparc): Make several local variables const.
2158 (compare_opcodes): Change arguments to const PTR. Add prototype.
2159 * sparc-opc.c (arg): Change name field to be const.
2160 (lookup_name, lookup_value): Add prototypes. Change table and
2161 name parameters to be const.
2162 (sparc_encode_asi): Change name parameter to be const.
2163 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2164 (sparc_encode_sparclet_cpreg): Likewise.
2165 (sparc_decode_asi): Change return type to be const.
2166 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2167 (sparc_decode_sparclet_cpreg): Likewise.
2169 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2171 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2172 Solaris doesn't like the combined options, and the -f is
2174 (stamp-tshlink, install): Likewise.
2176 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2178 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2181 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2183 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2185 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2187 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2190 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2192 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2194 start-sanitize-tic80
2195 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2197 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2199 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2201 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2204 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2206 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2207 floatformat_to_double to make portable.
2208 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2211 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2213 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2214 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2216 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2218 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2219 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2221 start-sanitize-tic80
2222 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2224 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2225 (OFF_SL_BR_SCALED): ... to this, and added the flag
2226 TIC80_OPERAND_BASEREL to the flags word.
2227 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2231 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2233 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2234 Change mips_opcodes from const array to a pointer,
2235 and change bfd_mips_num_opcodes from const int to int,
2236 so that we can increase the size of the mips opcodes table
2239 start-sanitize-tic80
2240 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2242 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2243 store BITNUM values in the table in one's complement form
2244 to match behavior when assembler is given a raw numeric
2245 value for a BITNUM operand.
2246 * tic80-dis.c (print_operand_bitnum): Ditto.
2249 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2251 * d30v-opc.c: Removed references to FLAG_X.
2253 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2257 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2259 * Makefile.in: Added d30v object files.
2260 * configure: (bfd_d30v_arch) Rebuilt.
2261 * configure.in: (bfd_d30v_arch) Added new case.
2262 * d30v-dis.c: New file.
2263 * d30v-opc.c: New file.
2264 * disassemble.c (disassembler) Add entry for d30v.
2266 start-sanitize-tic80
2267 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2269 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2270 representations for the floating point BITNUM values.
2272 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2274 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2275 in the table in one's complement form, as they appear in the
2277 (tic80_symbol_to_value): Use macros to access predefined
2279 (tic80_value_to_symbol): Ditto.
2280 (tic80_next_predefined_symbol): New function.
2281 * tic80-dis.c (print_operand_bitnum): Remove code that did
2282 one's complement for BITNUM values.
2285 start-sanitize-r5900
2286 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2288 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2291 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2293 * makefile.vms: Remove 8 bit characters. Update to latest
2296 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2298 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2300 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2302 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2303 (IMM24_PCREL): Likewise.
2305 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2307 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2308 address for an extended PC relative instruction that is not a
2311 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2313 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2316 start-sanitize-tic80
2317 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2319 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2320 (tic80_opcodes): Sort entries so that long immediate forms
2321 come after short immediate forms, making it easier for
2322 assembler to select the right one for a given operand.
2325 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2327 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2329 (print_insn_mips16): Likewise.
2331 start-sanitize-r5900
2332 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2334 * mips-opc.c: add r5900.
2337 start-sanitize-tic80
2338 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2340 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2341 a symbol class that restricts translation to just that
2342 class (general register, condition code, etc).
2344 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2346 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2347 and REG_DEST_E for register operands that have to be
2348 an even numbered register. Add REG_FPA for operands that
2349 are one of the floating point accumulator registers.
2350 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2351 (tic80_opcodes): Change entries that need even numbered
2352 register operands to use the new operand table entries.
2353 Add "or" entries that are identical to "or.tt" entries.
2356 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * mips16-opc.c: Add new cases of exit instruction for
2360 * mips-dis.c (print_mips16_insn_arg): Display floating point
2361 registers in operands of exit instruction. Print `$' before
2362 register names in operands of entry and exit instructions.
2364 start-sanitize-tic80
2365 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2367 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2368 pairs for all predefined symbols recognized by the assembler.
2369 Also used by the disassembling routines.
2370 (tic80_symbol_to_value): New function.
2371 (tic80_value_to_symbol): New function.
2372 * tic80-dis.c (print_operand_control_register,
2373 print_operand_condition_code, print_operand_bitnum):
2374 Remove private tables and use tic80_value_to_symbol function.
2377 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2379 * d10v-dis.c (print_operand): Change address printing
2380 to correctly handle PC wrapping. Fixes PR11490.
2382 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2384 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2387 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2389 * mips-dis.c (print_insn_mips16): Set insn_info information.
2390 (print_mips16_insn_arg): Likewise.
2392 * mips-dis.c (print_insn_mips16): Better handling of an extend
2393 opcode followed by an instruction which can not be extended.
2395 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2397 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2398 coldfire moveb instruction to not allow an address register as
2399 destination. Although the documentation does not indicate that
2400 this is invalid, experiments uncovered unexpected behavior.
2401 Added a comment explaining the situation. Thanks to Andreas
2402 Schwab for pointing this out to me.
2404 start-sanitize-tic80
2405 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2407 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2408 entries are presorted so that entries with the same mnemonic are
2409 adjacent to each other in the table. Sort the entries for each
2410 instruction so that this is true.
2413 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2415 * m68k-dis.c: Include <libiberty.h>.
2416 (print_insn_m68k): Sort the opcode table on the most significant
2417 nibble of the opcode.
2419 start-sanitize-tic80
2420 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2422 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2423 "vsub", "vst", "xnor", and "xor" instructions.
2424 (V_a1): Renamed from V_a, msb of accumulator reg number.
2425 (V_a0): Add macro, lsb of accumulator reg number.
2427 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2429 * tic80-dis.c (print_insn_tic80): Broke excessively long
2430 function up into several smaller ones and arranged for
2431 the instruction printing function to be callable recursively
2432 to print vector instructions that have both a load and a
2433 math instruction packed into a single opcode.
2434 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2435 to explain why it comes after the other vector opcodes.
2438 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2440 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2441 move insns to handle immediate operands.
2443 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2445 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2446 fix operand mask in the "moveml" entries for the coldfire.
2448 start-sanitize-tic80
2449 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2452 New macros for building vector instruction opcodes.
2453 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2454 FMT_LI, which were unused. The field is now a flags field.
2455 Remove some opcodes that are possible, but illegal, such
2456 as long immediate instructions with doubles for immediate
2457 values. Add "vadd" and "vld" instructions.
2459 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2461 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2462 the order more logical. Move the shift alias instructions ("rotl",
2463 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2464 interspersed with the regular sr.x and sl.x instructions. Add
2465 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2466 "sub", "subu", "swcr", and "trap".
2468 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2470 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2471 (OFF_SL_PC): Renamed from OFF_SL.
2472 (OFF_SS_BR): New operand type for base relative operand.
2473 (OFF_SL_BR): New operand type for base relative operand.
2474 (REG_BASE): New operand type for base register operand.
2475 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2476 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2477 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2479 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2480 10 char field, padded with spaces on rhs, rather than a string
2481 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2482 than old TIC80_OPERAND_RELATIVE. Add support for new
2483 TIC80_OPERAND_BASEREL flag bit.
2485 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2487 * tic80-dis.c (print_insn_tic80): Print floating point operands
2489 * tic80-opc.c (SPFI): Add single precision floating point
2490 immediate operand type.
2491 (ROTATE): Add rotate operand type for shifts.
2492 (ENDMASK): Add for shifts.
2493 (n): Macro for the 'n' bit.
2494 (i): Macro for the 'i' bit.
2495 (PD): Macro for the 'PD' field.
2496 (P2): Macro for the 'P2' field.
2497 (P1): Macro for the 'P1' field.
2498 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2502 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2504 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2505 adding in current address for pc-relative operands.
2507 start-sanitize-tic80
2508 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2510 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2511 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2512 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2513 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2514 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2515 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2516 (REG_SCALED, LSI_SCALED): New operand types.
2517 (E): New macro for 'E' bit at bit 27.
2518 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2519 opcodes, including the various size flavors (b,h,w,d) for
2520 the direct load and store instructions.
2522 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2524 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2526 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2527 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2528 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2529 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2530 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2531 masks with "MASK_* & ~M_*" to get the M bit reset.
2532 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2534 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2536 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2537 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2538 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2540 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2541 CC, SICR, and LICR table entries.
2542 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2543 "bcnd", and "brcr" opcodes.
2546 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2548 * ppc-opc.c (powerpc_operands): Make comment match the
2549 actual fields (no shift field).
2550 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2551 start-sanitize-tic80
2552 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2553 partial implementation, work in progress.
2554 * tic80-opc.c (tic80_operands): Begin construction operands table.
2555 (tic80_opcodes): Continue populating opcodes table and start
2556 filling in the operand indices.
2557 (tic80_num_opcodes): Add this.
2560 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2562 * m68k-opc.c: Add #B case for moveq.
2564 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2566 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2567 before they are used.
2569 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2571 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2572 for "breakpoint" instruction.
2574 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2576 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2577 (dep): Use ALL_CFLAGS rather than CFLAGS.
2579 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2581 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2584 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2586 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2587 start-sanitize-tic80
2588 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2591 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2593 * mips16-opc.c: Add "abs".
2595 start-sanitize-tic80
2596 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2598 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2599 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2600 (disassembler): Add bfd_arch_tic80 support to set disassemble
2601 to print_insn_tic80.
2602 * tic80-dis.c (print_insn_tic80): Add stub.
2604 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2606 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2607 * configure: Regenerate with autoconf.
2608 * tic80-dis.c: Add file.
2609 * tic80-opc.c: Add file.
2612 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2614 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2616 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2618 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2619 (mn10200_opcodes): Use it for some logicals and btst insns.
2620 Add "break" and "trap" instructions.
2622 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2624 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2626 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2628 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2629 relative load or add now depends upon whether the instruction is
2632 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2634 * mn10200-dis.c: Finish writing disassembler.
2635 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2636 Fix mask for "jmp (an)".
2638 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2639 handle endianness issues for mn10300.
2641 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2643 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2645 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2646 instruction. Fix opcode field for "movb (imm24),dn".
2648 * mn10200-opc.c (mn10200_operands): Fix insertion position
2651 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2653 * mn10200-opc.c: Create mn10200 opcode table.
2654 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2655 but moving along nicely.
2657 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2659 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2661 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2663 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2664 specifiers for fmovem* instructions.
2666 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2668 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2670 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2672 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2675 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2677 * mn10300-opc.c: Add some comments explaining the various
2680 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2682 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2684 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2687 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2688 operand specifiers in fmovm* instructions.
2690 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2692 * ppc-opc.c (insert_li): Give an error if the offset has the two
2693 least significant bits set.
2695 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2697 * mips-dis.c (print_insn_mips16): Separate the instruction from
2698 the arguments with a tab, not a space.
2700 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2702 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2705 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2708 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2710 * configure: Rebuild with autoconf 2.12.
2712 Add support for mips16 (16 bit MIPS implementation):
2713 * mips16-opc.c: New file.
2714 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2715 (mips16_reg_names): New static array.
2716 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2717 after seeing a 16 bit symbol.
2718 (print_insn_little_mips): Likewise.
2719 (print_insn_mips16): New static function.
2720 (print_mips16_insn_arg): New static function.
2721 * mips-opc.c: Add jalx instruction.
2722 * Makefile.in (mips16-opc.o): New target.
2723 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2724 * configure: Rebuild.
2726 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2728 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2729 operand specifiers in *save, *restore and movem* instructions.
2731 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2734 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2735 register operands for immediate arithmetic, not, neg, negx, and
2736 set according to condition instructions.
2738 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2739 specifier of the effective-address operand in immediate forms of
2740 arithmetic instructions. The specifier for the immediate operand
2741 notes how and where the constant will be stored.
2743 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2745 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2748 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2751 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2753 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2755 * mn10300-dis.c (disassemble): Handle register lists.
2757 * mn10300-opc.c: Fix handling of register list operand for
2758 "call", "ret", and "rets" instructions.
2760 * mn10300-dis.c (disassemble): Print PC-relative and memory
2761 addresses symbolically if possible.
2762 * mn10300-opc.c: Distinguish between absolute memory addresses,
2763 pc-relative offsets & random immediates.
2765 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2767 (disassemble): Handle SPLIT and EXTENDED operands.
2769 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2771 * mn10300-dis.c: Rough cut at printing some operands.
2773 * mn10300-dis.c: Start working on disassembler support.
2774 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2776 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2778 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2780 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2782 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2784 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2786 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2787 register argument is calls and jmp instructions.
2789 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2791 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2792 getx operand. Fix opcode for mulqu imm,dn.
2794 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2796 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2797 in MN10300_OPERAND_SPLIT operands for how many bits
2798 appear in the basic insn word. Add IMM32_HIGH24,
2799 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2800 (mn10300_opcodes): Use new operands as needed.
2802 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2803 for bset, bclr, btst instructions.
2804 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2806 * mn10300-opc.c (mn10300_operands): Remove many redundant
2807 operands. Update opcode table as appropriate.
2808 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2809 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2811 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2813 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2814 operands (for indexed load/stores). Fix bitpos for DI
2815 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2816 few instructions that insert immediates/displacements in the
2817 middle of the instruction. Add IMM8E for 8 bit immediate in
2818 the extended part of an instruction.
2819 (mn10300_operands): Use new opcodes as appropriate.
2821 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2823 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2824 sequential so the assembler never parallelizes it with
2827 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2829 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2830 a data/address register that appears in register field 0
2831 and register field 1.
2832 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2834 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2836 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2837 standard disassembly.
2839 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2840 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2841 Recategorize PALcode instructions.
2843 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2845 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2847 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2849 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2850 there are no operand types.
2852 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2854 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2856 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2858 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2860 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2862 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2864 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2865 and sst.w instructions.
2867 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2870 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2872 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2875 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2877 * ppc-opc.c (PPCPWR2): Define.
2878 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2881 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2883 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2884 field for movhu instruction.
2886 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2887 cast value to "long" not "signed long" to keep hpux10
2890 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2892 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2895 * mn10300-opc.c (FMT*): Remove definitions.
2897 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2898 for shift-by-register opcodes.
2900 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2901 into [AD][MN][01] for encoding the position of the register
2904 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2906 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2907 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2909 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2911 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2912 Fix various typos. Add "PAREN" operand.
2913 (MEM, MEM2): Define.
2914 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2915 operands. Fix several typos.
2917 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2920 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2922 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2923 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2925 (mn10300_opcodes): Break opcode format out into its own field.
2926 Update many operand fields to deal with signed vs unsigned
2927 issues. Fix one or two typos in the "mov" instruction
2928 opcode, mask and/or operand fields.
2930 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2932 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2933 m68851 wasn't reset.
2935 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2937 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2938 all opcodes. Very rough cut at operands for all opcodes.
2940 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2943 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2945 * mn10200-opc.c, mn10300-opc.c: New files.
2946 * mn10200-dis.c, mn10300-dis.c: New files.
2947 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2948 * disassemble.c: Break mn10x00 support into 10200 and 10300
2950 * configure.in: Likewise.
2951 * configure: Rebuilt.
2953 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2955 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2957 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2959 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2961 * disassemble (ARCH_mn10x00): Define.
2962 (disassembler): Handle bfd_arch_mn10x00.
2963 * configure.in: Recognize bfd_mn10x00_arch.
2964 * configure: Rebuilt.
2966 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2968 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2969 accordingly. Don't declare functions using op_rtn.
2971 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2973 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2974 params to be more standard.
2975 * (disassemble): Print absolute addresses and symbolic names for
2976 branch and jump targets.
2977 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2979 * (v850_opcodes): Add breakpoint insn.
2981 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2983 * m68k-opc.c: Move the fmovemx data register cases before the
2984 other cases, so that they get recognized before the data register
2985 does gets treated as a degenerate register list.
2987 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2989 * mips-opc.c: Add a case for "div" and "divu" with two registers
2990 and a destination of $0.
2992 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2994 * mips-dis.c (print_insn_arg): Add prototype.
2995 (_print_insn_mips): Ditto.
2997 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2999 * mips-dis.c (print_insn_arg): Print condition code registers as
3002 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3004 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3006 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3008 * v850-dis.c (disassemble): Make static. Provide prototype.
3010 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3012 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3015 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3017 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3018 ']' characters into the output stream.
3019 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3020 Add "memop" field to all opcodes (for the disassembler).
3021 Reorder opcodes so that "nop" comes before "mov" and "jr"
3022 comes before "jarl".
3024 * v850-dis.c (print_insn_v850): Fix typo in last change.
3026 * v850-dis.c (print_insn_v850): Properly handle disassembling
3027 a two byte insn at the end of a memory region when the memory
3028 region's size is only two byte aligned.
3030 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3032 * v850-dis.c (v850_reg_names): Define.
3033 (v850_sreg_names, v850_cc_names): Likewise.
3034 (disassemble): Very rough cut at printing operands (unformatted).
3036 * v850-opc.c (BOP_MASK): Fix.
3037 (v850_opcodes): Fix mask for jarl and jr.
3039 * v850-dis.c: New file. Skeleton for disassembler support.
3040 * Makefile.in Remove v850 references, they're not needed here.
3041 * configure.in: Add v850-dis.o when building v850 toolchains.
3042 * configure: Rebuilt.
3043 * disassemble.c (disassembler): Call v850 disassembler.
3045 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3046 (insert_d8_6, extract_d8_6): New functions.
3047 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3048 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3050 (IF4A, IF4B): Use "D7" instead of "D7S".
3051 (IF4C, IF4D): Use "D8_7" instead of "D8".
3052 (IF4E, IF4F): New. Use "D8_6".
3053 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3054 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3056 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3057 (v850_operands): Change D16 to D16_15, use special insert/extract
3058 routines. New new D16 that uses the generic insert/extract code.
3059 (IF7A, IF7B): Use D16_15.
3060 (IF7C, IF7D): New. Use D16.
3061 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3063 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3064 message. Issue an error if the branch offset is odd.
3066 * v850-opc.c: Add notes about needing special insert/extract
3067 for all the load/store insns, except "ld.b" and "st.b".
3069 * v850-opc.c (insert_d22, extract_d22): New functions.
3070 (v850_operands): Use insert_d22 and extract_d22 for
3072 (insert_d9): Fix range check.
3074 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3076 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3077 and set bits field to D9 and D22 operands.
3079 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3081 * v850-opc.c (v850_operands): Define SR2 operand.
3082 (v850_opcodes): "ldsr" uses R1,SR2.
3084 * v850-opc.c (v850_opcodes): Fix opcode specs for
3085 sld.w, sst.b, sst.h, sst.w, and nop.
3087 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3089 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3090 end of the opcode table.
3092 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3094 * d10v-opc.c (pre_defined_registers): Added register pairs,
3095 "r0-r1", "r2-r3", etc.
3097 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3099 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3100 Create I16U for an unsigned 16bit mmediate operand.
3101 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3103 * v850-opc.c (v850_operands): Define EP operand.
3104 (IF4A, IF4B, IF4C, IF4D): Use EP.
3106 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3107 with immediate operand, "movhi". Tweak "ldsr".
3109 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3110 correct. Get sld.[bhw] and sst.[bhw] closer.
3112 * v850-opc.c (v850_operands): "not" is a two byte insn
3114 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3116 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3118 * v850-opc.c (two): Get order of words correct.
3120 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3122 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3123 register source and destination operands.
3124 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3126 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3127 same thinko in "trap" opcode.
3129 * v850-opc.c (v850_opcodes): Add initializer for size field
3132 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3133 Add D8 for 8-bit unsigned field in short load/store insns.
3134 (IF4A, IF4D): These both need two registers.
3135 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3136 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3137 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3138 for "ldsr" and "stsr".
3139 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3142 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3143 short store word (sst.w).
3145 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3147 * v850-opc.c (v850_operands): Added insert and extract fields,
3148 pointers to functions that handle unusual operand encodings.
3150 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3152 * v850-opc.c (v850_opcodes): Enable "trap".
3154 * v850-opc.c (v850_opcodes): Fix order of displacement
3155 and register for "set1", "clr1", "not1", and "tst1".
3157 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3159 * v850-opc.c (v850_operands): Add "B3" support.
3160 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3163 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3165 * v850-opc.c: Close unterminated comment.
3167 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3169 * v850-opc.c (v850_operands): Add flags field.
3170 (v850_opcodes): add move opcodes.
3172 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3174 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3175 * configure: (bfd_v850v_arch) Add new case.
3176 * configure.in: (bfd_v850_arch) Add new case.
3177 * v850-opc.c: New file.
3179 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3181 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3183 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3185 * d10v-opc.c: Add additional information to the opcode
3186 table to help determinine which instructions can be done
3189 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3191 * mpw-make.sed: Update editing of include pathnames to be
3194 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3196 * arm-opc.h: Added "bx" instruction definition.
3198 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3200 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3202 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3204 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3206 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3208 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3210 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3212 * makefile.vms: Update for alpha-opc changes.
3214 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3216 * i386-dis.c (print_insn_i386): Actually return the correct value.
3217 (ONE, OP_ONE): #ifdef out; not used.
3219 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3221 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3222 Changed subi operand type to treat 0 as 16.
3224 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3226 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3229 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3231 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3232 memory transfer instructions. Add new format string entries %h and %s.
3233 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3236 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3238 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3239 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3241 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3243 * alpha-dis.c (print_insn_alpha_osf): Remove.
3244 (print_insn_alpha_vms): Remove.
3245 (print_insn_alpha): Make globally visible. Chose the register
3246 names based on info->flavour.
3247 * disassemble.c: Always return print_insn_alpha for the alpha.
3249 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3251 * d10v-dis.c (dis_long): Handle unknown opcodes.
3253 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3255 * d10v-opc.c: Changes to support signed and unsigned numbers.
3256 All instructions with the same name that have long and short forms
3257 now end in ".l" or ".s". Divs added.
3258 * d10v-dis.c: Changes to support signed and unsigned numbers.
3260 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3262 * d10v-dis.c: Change all functions to use info->print_address_func.
3264 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3266 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3267 move ccr/sr insns more strict so that the disassembler only
3268 selects them when the addressing mode is data register.
3270 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3271 * d10v-opc.c (pre_defined_registers): Declare.
3272 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3273 to pick a better name for the registers.
3275 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3278 operands for fexpand and fpmerge. From Christian Kuehnke
3279 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3281 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3283 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3284 print routine. Take new regnames and cpumask arguments.
3285 Kill the environment variable nonsense.
3286 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3287 (print_insn_alpha_vms): New function. Do VMS style regnames.
3288 * disassemble.c (disassembler): Test bfd flavour to pick
3289 between OSF and VMS routines. Default to OSF.
3291 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3294 * configure: Rebuild.
3295 * Makefile.in (install): Use @INSTALL_SHLIB@.
3297 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3299 * configure: (bfd_d10v_arch) Add new case.
3300 * configure.in: (bfd_d10v_arch) Add new case.
3301 * d10v-dis.c: New file.
3302 * d10v-opc.c: New file.
3303 * disassemble.c (disassembler) Add entry for d10v.
3305 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3307 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3308 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3310 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3312 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3313 distinguish between variants of the instruction set.
3314 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3315 distinguish between variants of the instruction set.
3317 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3319 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3320 the 8086 instruction set.
3321 * i386-dis.c: General cleanups. Make most things static. Add
3322 prototypes. Get rid of static variables aflags and dflags. Pass
3323 them as args (to almost everything).
3325 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3327 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3329 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3331 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3332 if the next arg is marked with SRC_IN_DST. Gross.
3334 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3335 we're looking for and find EXR.
3337 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3338 if we're looking for KBIT and we don't find it.
3340 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3343 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3344 3bit immediate operands.
3346 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3348 * Released binutils 2.7.
3350 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3351 <kkaempf@progis.ac-net.de>.
3353 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3355 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3357 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3359 * sparc-dis.c (print_insn_sparclite): New routine to print
3360 sparclite instructions.
3362 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3364 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3366 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3368 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3369 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3370 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3372 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3374 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3375 Use autoconf-set values.
3376 (docdir, oldincludedir): Removed.
3377 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3379 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3381 * alpha-opc.c: New file.
3382 * alpha-opc.h: Remove.
3383 * alpha-dis.c: Complete rewrite to use new opcode table.
3384 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3385 * configure: Rebuild with autoconf 2.10.
3386 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3387 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3389 (alpha-opc.o): New target.
3391 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3393 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3394 Set imm_added_to_rs1 even if the source and destination register
3397 * sparc-opc.c: Add some two operand forms of the wr instruction.
3399 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3401 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3404 * disassemble.c (disassembler): Handle H8/S.
3405 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3407 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3409 * sparc-opc.c: Add beq/teq as aliases for be/te.
3411 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3412 <sergei@msil.sps.mot.com>.
3414 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3416 * makefile.vms: New file.
3418 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3420 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3422 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3425 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3427 * i386-dis.c (OP_OFF): Call append_prefix.
3429 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3431 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3432 unsigned long to silence a warning from the Solaris PowerPC
3435 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3437 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3439 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3441 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3443 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3444 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3445 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3446 cpush, cpusha, cpull sparclet insns.
3448 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3450 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3452 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3455 Set F_FLOAT on other floating point instructions.
3457 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3459 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3461 (powerpc_opcodes): Add 860/821 specific SPRs.
3463 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3465 * configure.in: Permit --enable-shared to specify a list of
3466 directories. Set and substitute BFD_PICLIST.
3467 * configure: Rebuild.
3468 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3469 uses. Set to @BFD_PICLIST@.
3471 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3473 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3474 not "abs", which may be needed for the absolute in something
3475 like btst #0,@10:8. Print L_3 immediates separately from other
3476 immediates. Change ABSMOV reference to ABS8MEM.
3478 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3480 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3481 (current_arch_mask): New static global.
3482 (compute_arch_mask): New static function.
3483 (print_insn_sparc): Delete sparc_v9_p. New static local
3484 current_mach. Resort opcode table if current_mach changes.
3485 Generalize "insn not supported" test.
3486 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3487 Delete test for v9/!v9.
3488 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3490 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3491 (brfcx): Renamed to FBRX.
3492 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3493 coprocessor mnemonics are not supported on the sparclet).
3494 (condf): Renamed to CONDF.
3495 (SLCBCC2): Delete F_ALIAS flag.
3497 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3499 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3500 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3502 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3504 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3505 that the shared library version number is set correctly.
3507 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3509 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3510 Miles Bader <miles@gnu.ai.mit.edu>.
3511 * configure: Rebuild.
3513 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3515 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3518 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * configure: Rebuild with autoconf 2.8.
3522 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3524 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3525 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3527 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3529 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3530 since they appear as targets in Makefile.in.
3531 * configure: Rebuild.
3533 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3535 * mpw-make.sed: Edit out shared library support bits.
3537 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3539 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3540 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3541 (sparc_opcodes): Add sparclet insns.
3542 (sparclet_cpreg_table): New static local.
3543 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3544 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3546 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3548 * i386-dis.c (index16): New static variable.
3549 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3551 (OP_indirE): Return result of OP_E.
3552 (OP_E): Check for 16 bit addressing mode, and disassemble
3553 correctly. Optimised 32 bit case a little. Don't print
3554 "(base,index,scale)" when sib specifies only an offset.
3556 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * configure.in: Set and substitute SHLIB_DEP.
3559 * configure: Rebuild.
3560 * Makefile.in (SHLIB_DEP): New variable.
3561 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3562 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3563 COMMON_SHLIB, add them to piclist with appropriate modifications.
3564 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3565 here: just use piclist.
3567 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3569 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3570 (print_insn_sparc): Rewrite v9/not-v9 tests.
3571 (compare_opcodes): Likewise.
3572 * sparc-opc.c (MASK_<ARCH>): Define.
3573 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3574 (sparclet,v6notv9): Define.
3575 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3576 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3578 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * configure.in: Call AC_PROG_CC before configure.host.
3581 * configure: Rebuild.
3583 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3585 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3587 * i386-dis.c (onebyte_has_modrm): New static array.
3588 (twobyte_has_modrm): New static array.
3589 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3591 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3593 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3596 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3598 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3601 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3603 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3604 m68010up, not just m68020up | cpu32.
3606 * Makefile.in (SONAME): New variable.
3607 ($(SHLINK)): Make a link to the transformed name, as well.
3608 (stamp-tshlink): New target.
3609 (install): Skip stamp-tshlink during install.
3611 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3613 * configure.in: Call AC_ARG_PROGRAM.
3614 * configure: Rebuild.
3615 * Makefile.in (program_transform_name): New variable.
3616 (install): Transform library name before installing it.
3618 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3620 * i960-dis.c (mem): Add HX dcinva instruction.
3622 Support for building as a shared library, based on patches from
3623 Alan Modra <alan@spri.levels.unisa.edu.au>:
3624 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3625 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3626 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3627 * configure: Rebuild.
3628 * Makefile.in (ALLLIBS): New variable.
3629 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3630 (COMMON_SHLIB, SHLINK): New variables.
3631 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3632 (STAGESTUFF): Remove variable.
3633 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3634 (stamp-piclist, piclist): New targets.
3635 ($(SHLIB), $(SHLINK)): New targets.
3636 ($(OFILES)): Depend upon stamp-picdir.
3637 (disassemble.o): Build twice if PICFLAG is set.
3638 (MOSTLYCLEAN): Add pic/*.o.
3639 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3640 (distclean): Remove pic and stamp-picdir.
3641 (install): Install shared libraries.
3642 (stamp-picdir): New target.
3644 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3646 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3647 Print unknown instruction as "unknown", rather than in hex.
3649 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3651 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3653 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3655 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3657 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3659 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3660 when necessary. From Ulrich Drepper
3661 <drepper@myware.rz.uni-karlsruhe.de>.
3663 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3665 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3666 sparc_num_opcodes. Update architecture enum values.
3667 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3668 (sparc_opcode_lookup_arch): New function.
3669 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3670 (sparc_opcodes): Add v9a shutdown insn.
3672 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3674 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3675 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3677 (print_insn_sparc64): Deleted.
3678 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3681 * sparc-opc.c (architecture_pname): Add v9a.
3683 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3685 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3686 incorrectly defined as 0x16 when it should be 0x15.
3687 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3688 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3689 excb (exception barrier) which is defined in the Alpha
3690 Architecture Handbook version 2.
3691 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3692 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3693 disassembled as or, for example.
3695 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3697 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3698 (_print_insn_mips): Change i from int to unsigned int.
3700 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3702 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3703 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3705 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3707 * i386-dis.c: Added Pentium Pro instructions.
3709 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3711 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3714 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3716 * sh-opc.h (sh_nibble_type): Added REG_B.
3717 (sh_arg_type): Added A_REG_B.
3718 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3720 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3722 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3724 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3726 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3728 * Makefile.in (distclean): Remove stamp-h. From Ronald
3729 F. Guilmette <rfg@monkeys.com>.
3731 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3733 From David Mosberger-Tang <davidm@azstarnet.com>:
3734 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3737 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3739 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3740 (sh_table): Added many SH3 opcodes.
3741 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3743 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3745 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3746 (subco,subco.): Mark this PPC, not PPCCOM.
3748 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3750 * configure: Rebuild with autoconf 2.7.
3752 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3754 * configure: Rebuild with autoconf 2.6.
3756 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3758 * configure.in: Sort list of architectures. Accept but do nothing
3759 for alliant, convex, pyramid, romp, and tahoe.
3761 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3763 * a29k-dis.c (print_special): Change num to unsigned int.
3765 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3767 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3770 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3772 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3773 * configure: Rebuilt.
3775 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3777 * configure.in: Add case for bfd_i860_arch.
3778 * configure: Rebuild.
3780 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3782 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3783 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3784 (NEXTDOUBLE): Likewise.
3785 (print_insn_m68k): Don't match fmoveml if there is more than one
3786 register in the list.
3787 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3789 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3791 * m68k-opc.c: Use #W rather than #w.
3792 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3794 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3796 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3797 and likewise for all the dbxx opcodes.
3799 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3801 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3803 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3805 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3806 the VR4100 specific instructions to the mips_opcodes structure.
3808 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3810 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3811 ugly Metrowerks bug in CW6, is fixed in CW7.
3813 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3815 * ppc-opc.c (whole file): Add flags for common/any support.
3817 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3819 * Makefile.in (BISON): Remove macro.
3820 (FLAGS_TO_PASS): Remove BISON.
3822 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3824 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3826 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3827 instructions that take no args by looking at the match mask.
3828 (print_insn_arg): Always print "%" before register names.
3829 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3830 [case '_']: Don't print "@#" before address.
3831 [case 'J']: Use "%s" as format string, not register name.
3832 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3834 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3836 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3839 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3841 From David Mosberger-Tang <davidm@azstarnet.com>
3843 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3844 (alpha_insn_set): added definitions for VAX floating point
3845 instructions (Unix compilers don't generate these, but handcoded
3846 assembly might still use them).
3848 * alpha-dis.c (print_insn_alpha): added support for disassembling
3849 the miscellaneous instructions in the Alpha instruction set.
3851 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3853 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3854 no longer create sysdep.h, sed ppc-opc.c to work around a
3855 serious Metrowerks C bug.
3856 * mpw-make.in: Remove.
3857 * mpw-make.sed: New file, used by mpw-configure to edit
3858 Makefile.in into an MPW makefile.
3860 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3862 * Makefile.in (maintainer-clean): New synonym for realclean.
3864 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3866 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3867 which use '0', '1', and '2' instead. Specify the proper size for
3868 a pmove immediate operand. Correct the pmovefd patterns to be
3869 moves to a register, not from a register.
3870 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3872 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3874 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3875 %psr, %wim, %tbr as F_NOTV9.
3877 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3879 * Makefile.in (Makefile): Just rebuild Makefile when running
3881 (config.h, stamp-h): New targets.
3882 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3883 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3884 rebuilding config.h.
3885 * configure: Rebuild.
3887 * mips-opc.c: Change unaligned loads and stores with "t,A"
3888 operands to use "t,A(b)".
3890 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3892 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3894 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3896 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3897 until 3 instead of until 2.
3899 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3901 * Makefile.in (ALL_CFLAGS): Define.
3902 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3903 (MOSTLYCLEAN): Add config.log.
3904 (distclean): Don't remove config.log.
3905 * configure.in: Substitute HDEFINES.
3906 * configure: Rebuild.
3908 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3910 * sh-opc.h (sh_arg_type): Add F_FR0.
3911 (sh_table, case fmac): Add F_FR0 as first argument.
3913 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3915 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3917 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3919 * sparc-dis.c: Remove all references to NO_V9.
3921 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3923 * aclocal.m4: Just include ../bfd/aclocal.m4.
3924 * configure: Rebuild.
3926 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3928 * sparc-dis.c (X_DISP19): Define.
3929 (print_insn, case 'G'): Use it.
3930 (print_insn, case 'L'): Sign extend displacement.
3932 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3934 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3935 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3936 host_makefile_frag or frags.
3937 * aclocal.m4: New file.
3938 * configure: Rebuild.
3939 * Makefile.in (INSTALL): Set to @INSTALL@.
3940 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3941 (INSTALL_DATA): Set to @INSTALL_DATA@.
3943 (AR_FLAGS): Set to rc rather than qc.
3944 (CC): Define as @CC@.
3945 (CFLAGS): Set to @CFLAGS@.
3946 (@host_makefile_frag@): Remove.
3947 (config.status): Remove dependency upon @frags@.
3949 * configure.in: ../bfd/config.bfd now just sets shell variables.
3950 Use them rather than looking through target Makefile fragments.
3951 * configure: Rebuild.
3953 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3955 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3957 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3959 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3960 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3963 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3964 (lookup_{name,value}): New functions.
3965 (prefetch_table): New static local.
3966 (sparc_{encode,decode}_prefetch): New functions.
3967 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3969 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3971 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3974 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3976 * sh-dis.c: Correct comment on first line of file.
3978 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3980 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3982 * sparc-opc.c (asi, membar): New static locals.
3983 (sparc_{encode,decode}_{asi,membar}): New functions.
3984 (sparc_opcodes, membar insn): Fix.
3985 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3986 Support decoding of membar masks.
3989 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3993 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3995 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3996 and likewise for the other branches. Add bhs as an alias for bcc,
3997 and likewise for the size variants. Add dbhs as an alias for
4000 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4002 * sh-opc.h (FP sts instructions): Update to match reality.
4004 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4006 * m68k-dis.c: (fpcr_names): Add % before all register names.
4007 (reg_names): Likewise.
4008 (print_insn_arg): Don't explicitly print % before register names.
4009 Add % before register names in static array names. In case 'r',
4010 print data registers as `@(Dn)', not `Dn@'. When printing a
4011 memory address, don't print @# before it.
4012 (print_indexed): Change base_disp and outer_disp from int to
4013 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4014 syntax. Sign extend 8 byte displacement correctly.
4015 (print_base): Print using MIT syntax. Print zpc when appropriate.
4016 Change parameter disp from int to bfd_vma.
4018 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4021 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4023 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4024 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4025 * sh-opc.h (sh_arg_type): Add new operand types.
4026 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4028 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4030 * Makefile.in (distclean): Remove generated file config.h.
4032 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4034 * Makefile.in (distclean): Remove generated file config.h.
4036 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4040 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4042 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4043 rather than numopcodes. Use m68k_opcodes rather than removed
4044 opcode function. Don't check F_ALIAS.
4045 (print_insn_arg): Change first parameter to be const char *.
4046 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4047 (m68k-opc.o): New target.
4048 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4049 * configure: Rebuild.
4051 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4053 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4054 (opcode_bits, opcode_hash_table): New variables.
4055 (opcodes_initialized): Renamed from opcodes_sorted.
4056 (build_hash_table): New function.
4057 (is_delayed_branch): Use hash table.
4058 (print_insn): Renamed from print_insn_sparc, made static.
4059 Build and use hash table. If !sparc64, ignore sparc64 insns,
4060 and vice-versa if sparc64.
4061 (print_insn_sparc, print_insn_sparc64): New functions.
4062 (compare_opcodes): Move sparc64 opcodes to end.
4063 Print commutative insns with constant second.
4064 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4066 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4068 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4069 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4070 avoids printing a delay slot in a delay slot.
4071 * sh-opc.h (sh_table): Fully bracket last entry.
4073 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4075 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4077 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4079 * configure.in: Get host_makefile_frag from ${srcdir}.
4081 * configure.in: Autoconfiscated. Check for string[s].h. Create
4082 config.h from config.in. Don't set up sysdep.h link.
4083 * sysdep.h: New file.
4084 * configure, config.in: New files, generated from configure.in.
4085 * Makefile.in: Updated to be processed autoconf-style.
4086 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4087 (Makefile): Depend on config.status.
4088 (config.status): New rule.
4089 * configure.bat: Update Makefile substitutions.
4091 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4093 * mips-opc.c (L1): Define.
4094 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4095 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4098 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4100 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4101 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4102 have multiple add units but only a single logical unit.
4104 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4105 shifted by 18, without any insertion or extraction function.
4106 (insert_cr, extract_cr): Remove.
4108 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4110 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4113 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4115 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4116 * sh-opc.h: Add copyright.
4118 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4120 * Makefile.in (crunch-m68k): Delete extra target accidentally
4121 checked in a while ago.
4123 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4125 * sh-opc.h (sh_table): Add SH3 support.
4127 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4129 * sh-opc.h: Added bsrf and braf.
4131 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4133 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4134 bogus [ls]fm{ea,fd} patterns.
4136 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4137 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4138 initialize it from memory. Make function static.
4139 (print_insn_{big,little}_arm): New functions.
4140 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4141 the correct endianness.
4143 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4145 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4148 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4150 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4151 17th, so that it builds again using GCC as the compiler.
4153 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4155 * mips-dis.c (print_insn_little_mips): Cast return value from
4156 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4157 expects an unsigned long, and that might be fewer words of
4158 argument storage (e.g., if bfd_vma is long long on a 32-bit
4160 (print_insn_big_mips): Likewise with bfd_getb32 value.
4161 (_print_insn_mips): Now static.
4163 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4165 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4166 gcc memory hog problem with initializer is fixed.
4168 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4170 Merge in support for Mac MPW as a host.
4171 (Old change descriptions retained for informational value.)
4173 * mpw-config.in (archname): Compute from the config.
4174 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4176 * mpw-config.in (target_arch): Compute from canonical target.
4177 (m68k, mips, powerpc, sparc): Add architectures.
4178 * mpw-make.in (disassemble.c.o): Add.
4179 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4181 * mpw-config.in (BFD_MACHINES): Set to a default value.
4182 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4184 * mpw-make.in (CSEARCH): Add extra-include to search path.
4186 * mpw-config.in (varargs.h): Don't create.
4187 (sysdep.h): Create using forward-include.
4188 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4190 * mpw-config.in: New file, MPW version of configure.in.
4191 * mpw-make.in: New file, MPW version of Makefile.in.
4193 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4195 * alpha-dis.c (print_insn_alpha): Put empty statement after
4198 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4200 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4201 (low_sign_extend): Likewise.
4202 (get_field): Delete unused function.
4203 (set_field, deposit_14, deposit_21): Likewise.
4205 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4207 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4210 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4212 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4214 * alpha-opc.h (OSF_ASMCODE): define
4215 print pal-code names as defined in App C of the
4216 Alpha Architecture Reference Manual
4218 * alpha-dis.c: cleaned up output
4219 print stylized code forms as defined in App A.4.3 of the
4220 Alpha Architecture Reference Manual
4222 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4224 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4226 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4229 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4231 * m68k-dis.c (opcode): New function. Returns address of opcode
4232 table entry given index, even if the opcode table was split to
4233 work around gcc bugs.
4234 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4236 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4237 (reg_names): Now const.
4238 (print_insn_arg): Arrays cacheFieldName and names now const.
4239 (print_indexed): Array scales now const.
4241 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4243 * ppc-opc.c: Sort recently added instructions by minor opcode
4244 number within major opcode number.
4246 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4248 * hppa-dis.c: Include libhppa.h.
4250 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4252 * mips-opc.c: Change dli to use M_DLI, and add dla.
4254 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4256 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4258 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4260 * mips-opc.c: Add r4650 mul instruction.
4262 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4264 * mips-opc.c: Add uld and usd macros for unaligned double load and
4267 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4269 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4270 mfdcr, mtdcr, icbt, iccci.
4272 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4274 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4275 signed char fields to shorts, more portable.
4277 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4279 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4280 char fields as signed chars, since they may have negative values.
4282 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4284 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4285 (mycroft@netbsd.org).
4287 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4289 From "Logg, Ed" <elogg@ea.com>:
4290 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4291 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4294 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4296 * ppc-opc.c: Changes based on patch from David Edelsohn
4297 <edelsohn@mhpcc.edu>.
4298 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4301 (insert_tbr): New static function.
4302 (extract_tbr): New static function.
4303 (XFXFXM_MASK, XFXM): Define.
4304 (XSPRBAT_MASK, XSPRG_MASK): Define.
4305 (powerpc_opcodes): Add instructions to access special registers by
4306 name. Add mtcr and mftbu.
4308 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4310 * mips-opc.c (P3): Define.
4311 (mips_opcodes): Add mad and madu.
4313 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4315 * configure.in: Add W65 support.
4316 * disassemble.c: Likewise.
4317 * w65-opc.h, w65-dis.c: New files.
4319 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4321 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4324 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4326 * mips-opc.c: Add dli as a synonym for li.
4328 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4330 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4331 print something for reserved opcode values, even if it won't
4334 * mips-dis.c (_print_insn_mips): When initializing, shift right
4335 and mask, to avoid sign extension problems on the Alpha.
4337 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4340 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4342 * sh-opc.h (mov.l gbr): Get direction right.
4343 * sh-dis.c (print_insn_shx): New function.
4344 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4345 print opcodes with right byte order.
4347 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4349 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4350 to avoid conflicts with getopt.
4352 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4354 * hppa-dis.c (print_insn_hppa): Read the instruction using
4355 bfd_getb32, so that it works on a little endian or 64 bit host.
4356 Remove unused local variable op.
4358 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4360 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4361 addu does not work correctly if -mips3.
4363 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4365 * a29k-dis.c (print_special): Add special register names defined
4366 on 29030, 29040 and 29050.
4367 (print_insn): Handle new operand type 'I'.
4369 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4371 * Makefile.in (INSTALL): Use top level install.sh script.
4373 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4375 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4376 that it works on a little endian host.
4378 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4380 * configure.in: Use ${config_shell} when running config.bfd.
4382 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4384 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4386 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4388 * a29k-dis.c (print_insn): Print the opcode.
4390 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4392 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4394 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4396 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4398 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4400 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4401 which store a value into memory.
4403 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4405 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4406 * arm-dis.c, arm-opc.h: New files.
4408 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4410 * Makefile.in (ns32k-dis.o): Add dependency.
4411 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4412 string, not as array of chars.
4414 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4416 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4418 * sparc-opc.c: Added sparclite extended FP operations, and
4419 versions of v9 impdep* instructions permitting specification of
4422 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4424 * i960-dis.c (reg_names): Now const.
4425 (struct sparse_tabent): New type, copied from array type in mem
4427 (ctrl): Local static array ctrl_tab now const.
4428 (cobr): Local static array cobr_tab now const.
4429 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4430 static variable mem_tab no longer explicitly initialized. Changed
4431 mem_init to const array of struct sparse_tabent.
4432 (reg): Local static variable reg_tab no longer explicitly
4433 initialized. Changed reg_init to const array of struct
4435 (ea): Local static array scale_tab now const.
4437 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4440 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4442 * configure.bat: the disassember needs to be enabled for
4443 "objdump -d" to work in djgpp.
4445 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4447 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4448 (invalid_float): Enabled general version, doesn't require running
4449 on ns32k host. Changed to take char* argument, and test for
4450 explicitly specified sizes, instead of using sizeof() on host CPU
4452 (INVALID_FLOAT): Cast first argument.
4453 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4454 list_P032, list_M032): Now const.
4455 (optlist, list_search): Made appropriate arguments now point to
4457 (print_insn_arg): Changed static array of one-character-string
4458 pointers into a static const array of characters; fixed sprintf
4459 statement accordingly.
4461 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4463 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4464 from distribution. A ns32k-dis.c from a previous distribution has
4465 been brought up to date and supports the new interface.
4467 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4469 * configure.in: add bfd_ns32k_arch target support.
4471 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4472 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4474 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4476 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4479 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4481 * h8300-dis.c, mips-dis.c: Don't use true and false.
4483 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4485 * configure.in: Change --with-targets to --enable-targets.
4487 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4489 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4490 opcodes to the first instruction with that opcode, to speed
4491 disassembly of large files. From ralphc@pyramid.com (Ralph
4494 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4496 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4498 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4500 * configure.bat: update to latest makefile.in
4502 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4504 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4505 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4506 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4507 slot insn is in a delay slot.
4508 * z8k-opc.h: (resflg): Fix patterns.
4509 * h8500-opc.h Fix CR insn patterns.
4511 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4513 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4514 "cmpl" before POWER versions, so that gas -many uses them.
4516 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4518 * disassemble.c: New file.
4519 * Makefile.in (OFILES): Add disassemble.o.
4520 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4521 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4522 binutils/configure.in.
4524 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4525 opcode being examined.
4527 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4529 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4530 (insert_ral, insert_ram, insert_ras): New functions.
4531 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4532 RAS for store with update.
4534 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4536 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4537 (edelsohn@npac.syr.edu).
4539 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4541 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4544 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4546 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4548 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4550 * ppc-opc.c (powerpc_operands): The signedp field has been
4551 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4552 instead. Add new operand SISIGNOPT.
4553 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4554 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4555 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4558 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4560 * i386-dis.c (struct private): Renamed to dis_private. `private'
4561 is a reserved word for dynix cc.
4563 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * configure.in: Change error message to refer to bfd/config.bfd
4566 rather than bfd/configure.in.
4568 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4570 * ppc-opc.c: Define POWER2 as short alias flag.
4571 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4574 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * i960-dis.c (print_insn_i960): Don't read a second word for
4577 opcodes 0, 1, 2 and 3.
4579 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4583 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * m68881-ext.c: Removed; no longer used.
4586 * Makefile.in: Changed accordingly.
4588 * m68k-dis.c (ext_format_68881): Don't declare.
4589 (print_insn_m68k): If an instruction uses place 'i', it uses at
4590 least four fixed bytes.
4591 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4592 extended float, convert to double using floatformat_to_double, not
4593 ieee_extended_to_double, and fetch the data before converting it.
4595 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4598 davidj@ICSI.Berkeley.EDU (David Johnson).
4600 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4602 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4603 PowerPC uses bdnz[l][a].
4605 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4607 * dis-buf.c, i386-dis.c: Include sysdep.h.
4609 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4611 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4613 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4614 by Motorola PowerPC 601 with PPC_OPCODE_601.
4615 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4616 Disassemble Motorola PowerPC 601 instructions as well as normal
4617 PowerPC instructions.
4619 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4621 * i960-dis.c (reg, mem): Just use a static array instead of
4624 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4626 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4627 condition name index if this is for a negated condition.
4629 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4630 Floating point format for 'H' operand is backwards from normal
4631 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4632 operands (fmpyadd and fmpysub), handle bizarre register
4633 translation correctly for single precision format.
4635 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4636 or 'I' operands if the next format specifier is 'M' (fcmp
4637 condition completer).
4639 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4641 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4642 single number giving a bitmask for the MB and ME fields of an M
4643 form instruction. Change NB to accept 32, and turn it into 0;
4644 also turn 0 into 32 when disassembling. Seperated SH from NB.
4645 (insert_mbe, extract_mbe): New functions.
4646 (insert_nb, extract_nb): New functions.
4647 (SC_MASK): Mask out SA and LK bits.
4648 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4649 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4650 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4651 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4652 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4653 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4654 (powerpc_macros): Define table of macro definitions.
4655 (powerpc_num_macros): Define.
4657 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4658 if PPC_OPERAND_NEXT is set.
4660 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4662 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4663 char. Retrieve contents using bfd_getl32 instead of shifting.
4665 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4667 * ppc-opc.c: New file. Opcode table for PowerPC, including
4668 opcodes for POWER (RS/6000).
4669 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4670 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4671 (CFILES): Add ppc-dis.c.
4672 (ppc-dis.o, ppc-opc.o): New targets.
4673 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4675 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4677 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4678 No space before 'u', 'f', or 'N'.
4680 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4682 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4683 farther than we should.
4685 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4687 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4689 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4691 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4693 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4694 needs it, to prevent reading past the end of a section.
4696 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4698 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4699 Removed t,A case for la; always use t,A(b) case.
4701 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4703 From Ted Lemen <mellon@pepper.ncd.com>
4704 * mips-dis.c (print_insn_arg): Handle 'k'.
4705 * mips-opc.c: Make cache use k, not t.
4707 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4709 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4710 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4711 FLOAT_FORMAT_CODE to put out floating point register names.
4713 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4715 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4717 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4719 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4721 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4723 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4724 larger than 32. Moved dsxx32 variants first for disassembler.
4726 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4728 * z8kgen.c, z8k-opc.h: Add full lda information.
4730 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4732 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4733 movb instructions. Any necessary space will be emitted by
4734 the code to handle nullification completers.
4736 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4740 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4742 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4743 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4745 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4747 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4749 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4751 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4752 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4754 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4756 * m88k-dis.c (m88kdis): comment change. Remove space after
4758 (printop): handle new arg types DEC and XREG for m88110.
4760 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4762 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4763 type for absolute branch addresses. Delete special
4764 "ble" and "be" code in 'W' operand code.
4766 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4768 * mips-opc.c: Set hazard information correctly for branch
4769 likely instructions.
4771 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4773 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4774 info->fprintf_func for printing and info->print_address_func for
4777 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4779 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4781 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4784 Corrected second case of "b" for disassembler.
4786 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4788 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4789 to BFD swapping routines to correspond to BFD name changes.
4791 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * mips-opc.c: Change div machine instruction to be z,s,t rather
4794 than s,t. Change div macro to be d,v,t rather than d,s,t.
4795 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4796 rem and remu which generates only the corresponding div
4797 instruction. This is for compatibility with the MIPS assembler,
4798 which only generates the simple machine instruction when an
4799 explicit destination of $0 is used.
4800 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4802 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4805 WR_31 hazard for bal, bgezal, bltzal.
4807 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4809 * hppa-dis.c (print_insn_hppa): Use print function
4810 from within the disassemble_info, not fprintf_filtered.
4812 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4814 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4815 Law, law@cs.utah.edu.)
4817 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4819 * mips-opc.c ("absu"): Removed.
4822 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4824 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4825 Changed hazard information to distinguish between memory load
4826 delays and coprocessor load delays.
4828 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4832 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4834 * configure.in: Don't pass cpu to config.bfd.
4836 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4838 * m88k-dis.c (m88kdis): Make class unsigned.
4840 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4842 * alpha-dis.c (print_insn_alpha): One branch format case was
4843 missing the instruction name.
4845 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4847 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4848 Add the arch-specific auxiliary files.
4849 (OFILES): Remove the arch-specific auxiliary files
4850 and use BFD_MACHINES instead of DIS_LIBS.
4851 * configure.in: Set BFD_MACHINES based on --with-targets option.
4853 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4855 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4858 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4860 * sparc-opc.c: Change CONST to const to deal with gcc
4861 -Dconst=__const -traditional.
4863 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4866 coprocessor instructions out of #if 0, and made them use new
4869 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4871 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4873 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4875 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4876 instruction, for use by the disassembler.
4878 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4879 hand-coded sign extensions that depended on 32-bit host ints.
4880 FIXME, we still depend on big-endian host bitfield ordering.
4881 (sparc_print_insn): Set the insn_info_valid field, and the
4882 other fields that describe the instruction being printed.
4884 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4886 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4887 `jmp' instead of just one of them.
4889 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4891 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4892 (fput_fp_reg_r): Renamed from fput_reg_r.
4893 (fput_fp_reg): New function.
4894 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4896 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4898 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4900 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4902 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4904 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4905 don't output a space.
4907 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4909 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4911 * mips-opc.c: New file, containing opcode table from
4912 ../include/opcode/mips.h.
4913 * Makefile.in: Add it.
4915 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * m88k-dis.c: New file, moved in from gdb and changed to use the
4918 new dis-asm.h disassembler interface.
4919 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4920 (m88k-dis.o): New target.
4922 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4924 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4925 argument string const char * to correspond to opcode/mips.h.
4927 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4929 * mips-dis.c: Updated to account for name changes in new version
4931 * Makefile.in: Added header file dependencies.
4933 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4935 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4937 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4939 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4940 extend, rather than shifts.
4942 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4944 * Makefile.in: Undo 15 June change.
4946 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4948 * m68k-dis.c (print_insn_arg): Change return value to byte count
4950 * m68k-dis.c: Re-write to detect invalid operands before
4951 printing anything, so we can handle this the same way we
4952 handle invalid opcodes.
4954 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4956 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4958 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4960 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4963 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4965 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4967 * configure.in: Do make sysdep.h link.
4968 * Makefile.in: Search ../include. Don't search ../bfd.
4970 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4972 Changes from Jeff Law, law@cs.utah.edu:
4973 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4974 Do not print a space before the completers specified by
4977 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4979 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4980 defined, since gdb has been fixed.
4982 Changes from Jeff Law, law@cs.utah.edu:
4983 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4984 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4985 be a *disassemble_info, not a *FILE.
4986 * hppa-dis.c: Support 'd', '!', and 'a'.
4987 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4988 * hppa-dis.c: Delete cases which are no longer needed.
4990 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4992 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4994 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4996 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4999 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5001 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5002 * configure.in: No longer need to configure to get sysdep.h.
5004 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5006 * Patches from Jeffrey Law <law@cs.utah.edu>.
5007 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5008 templates for 1.1 FP computational instructions.
5010 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5012 * h8500-dis.c (print_insn_h8500): Address argument is type
5014 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5017 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5018 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5020 * sparc-dis.c (compare_opcodes): Move static declaration to
5023 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5025 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5026 instruction, remove unimp hack from 'l' argument.
5028 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5030 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5033 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5035 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5036 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5039 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5041 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5042 arrays of string pointers to 2-d arrays of chars, to save
5045 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5047 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5048 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5050 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5052 * hppa-dis.c: New file from Utah, adapted to new disassembler
5054 * Makefile.in: Include it.
5056 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5058 * sh-dis.c, sh-opc.h: New files.
5060 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5062 * alpha-dis.c, alpha-opc.h: New files.
5064 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5066 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5069 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5071 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5073 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5075 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5078 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5080 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5081 and double percent signs a few places.
5083 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5085 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5086 Use info->print_address_func not print_address.
5088 * dis-buf.c (generic_print_address): New function.
5090 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5092 * Makefile.in: Add sparc-dis.c.
5093 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5095 Add `add' instruction to the set that get checked
5096 for a preceding `sethi' in order to print an absolute address.
5097 * (print_insn): Disassembly prefers real instructions.
5098 (is_delayed_branch): Speed up.
5099 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5100 Still missing some float ops, and needs testing.
5101 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5102 F_ALIAS. Use printf, not fprintf, when not passing a file
5104 (compare_opcodes): Check that identical instructions have
5105 identical opcodes, complain otherwise.
5108 * Include reg_names.
5110 Use dis-asm.h/read_memory_func interface.
5112 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5114 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5115 deliberately return non-zero to setjmp from longjmp. Otherwise
5116 this code fails to compile.
5118 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5120 * m68k-dis.c: Fix prototype for fetch_arg().
5122 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5124 * dis-buf.c: New file, for new read_memory_func interface.
5125 Makefile.in (OFILES): Include it.
5126 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5127 Use new read_memory_func interface.
5129 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5131 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5132 * h8500-opc.h: Fix couple of opcodes.
5134 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5136 * Makefile.in: add dvi & installcheck targets
5138 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5140 * Makefile.in: Update for h8500-dis.c.
5142 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5144 * h8500-dis.c, h8500-opc.h: New files
5146 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5148 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5149 ../include/dis-asm.h.
5150 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5151 and ../gdb/m68k-pinsn.c).
5152 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5153 and ../gdb/i386-pinsn.c).
5154 * m68881-ext.c: New file. Moved definition of
5155 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5156 * Makefile.in: Adjust for new files.
5157 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5158 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5159 can be dis-assembled.
5161 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5163 * mips-dis.c (print_insn_arg): Now returns void.
5165 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5167 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5168 files that use the macros.
5170 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5172 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5173 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5174 (CFILES): Added mips-dis.c.
5176 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5178 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5179 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5181 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5183 * Makefile.in: Improve *clean rules.
5184 * configure.in: Allow a default host.
5186 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5188 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5189 files include other sysdep files
5191 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5193 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5195 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5197 * configure.in: For host support, use ../bfd/configure.host
5198 so it stays in sync with the ../bfd/hosts database.
5200 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5202 * configure.in: use cpu-vendor-os triple instead of nested cases
5204 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5206 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5207 *always* the wrong one.
5209 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5211 * z8kgen.c: added copyright info
5213 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5215 * z8k-dis.c (unparse_instr): prettier tabs
5216 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5218 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5220 * configure.in: Add ncr* configuration.
5221 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5222 picayune ANSI compilers happy.
5224 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5226 * configure.in (i386): Make i386 and i486 synonymous for now.
5227 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5229 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5231 * Makefile.in (install): Fix typo.
5233 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5235 * Makefile.in (make): Remove obsolete crud.
5236 (sparc-opc.o): Avoid Sun Make VPATH bug.
5238 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5240 * Makefile.in: since there are no SUBDIRS, remove rule and
5241 references of subdir_do.
5243 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5245 * Makefile.in (install): Get the library name right here too.
5246 Don't install bfd.h, since it's unrelated to this library. No
5247 subdirs to recurse into, either.
5248 (CFILES): The source file has a .c suffix, not .o.
5250 * sparc-opc.c: New file, moved from BFD.
5251 * Makefile.in (OFILES): Build it.
5253 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5255 * z8k-dis.c: fixed forward refferences of some declarations.
5257 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5259 * Makefile.in: get the name of the library right
5261 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5263 * z8k-dis.c: knows how to disassemble z8k stuff
5264 * z8k-opc.h: new file full of z8000 opcodes
5268 version-control: never