* ppc-opc.c: Add optional `L' field to tlbie.

[binutils-gdb.git] / opcodes / ChangeLog

2002-03-13  Alan Modra  <amodra@bigpond.net.au>

        * ppc-opc.c: Add optional `L' field to tlbie.
        (XRTLRA_MASK): Define.

2002-03-06  Chris Demetriou  <cgd@broadcom.com>

        * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
        present on I4.

        * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".

2002-03-05  Paul Koning  <pkoning@equallogic.com>

        * pdp11-opc.c: Fix "mark" operand type.  Fix operand types
        for float opcodes that take float operands.  Add alternate
        names (xxxD vs. xxxF) for float opcodes.
        * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
        (print_foperand): New function to handle float opcode operands.
        (print_insn_pdp11): Use print_foperand to disassemble float ops.

2002-02-27  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/de.po: Updated.

2002-02-26  Brian Gaeke  <brg@dgate.org>

        * Makefile.am (install-data-local): Install dis-asm.h.

2002-02-26  Nick Clifton  <nickc@cambridge.redhat.com>

        * configure.in (LINGUAS): Add de.po.
        * configure: Regenerate.
        * po/de.po: New file.

2002-02-25  Alan Modra  <amodra@bigpond.net.au>

        * ppc-dis.c (powerpc_dialect): Handle power4 option.
        * ppc-opc.c (insert_bdm): Correct description of "at" branch
        hints.  Test PPC_OPCODE_POWER4 to determine branch hint flavour.
        (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
        (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
        (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
        (PPCCOM32, PPCCOM64): Delete.
        (NOPOWER4, POWER4): Define.
        (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
        and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
        are enabled for power4 rather than ppc64.

2002-02-20  Tom Rix  <trix@redhat.com>

        * ppc-opc.c (powerpc_operands): Add WS feild.  Use for tlbre, tlbwe.

2002-02-19  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * s390-dis.c (init_disasm): Use renamed architecture defines.

2002-02-19  matthew green  <mrg@redhat.com>

        * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
        specific.

2002-02-18  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/tr.po: Updated translation.

2002-02-15  Richard Henderson  <rth@redhat.com>

        * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
        disassembly mask.

2002-02-15  Richard Henderson  <rth@redhat.com>

        * alpha-opc.c (alpha_opcodes): Add simple pseudos for
        lda, ldah, jmp, ret.

2002-02-14  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/da.po: Updated translation.

2002-02-12  Graydon Hoare  <graydon@redhat.com>

        * cgen-asm.in (parse_insn_normal): Change call from
        @arch@_cgen_parse_operand to cd->parse_operand, to 
        facilitate CGEN_ASM_INIT_HOOK doing useful work.
        
2002-02-11  Alexandre Oliva  <aoliva@redhat.com>

        * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
        sign-extended.

2002-02-11  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: "make dep-am".
        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * configure: Regenerate.

2002-02-10  Hans-Peter Nilsson  <hp@bitrange.com>

        * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
        support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
        shl-*-linux*.
        * configure: Regenerate.

2002-02-10  Daniel Jacobowitz  <drow@mvista.com>

        * cgen-dis.c: Add prototypes for count_decodable_bits
        and add_insn_to_hash_chain.

2002-02-08  Alexandre Oliva  <aoliva@redhat.com>

        * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
        * configure: Rebuilt.

2002-02-08  Ivan Guzvinec <ivang@opencores.org>

        * or32-opc.c: Fix compile time warning messages.
        * or32-dis.c: Fix compile time warning messages.

2002-02-08  Alexandre Oliva  <aoliva@redhat.com>

        Contribute sh64-elf.
        2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
        * sh64-opc.c: Regenerate.
        2001-03-13  DJ Delorie  <dj@redhat.com>
        * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
        purpose is more obvious.
        * sh64-opc.c (shmedia_table): Ditto.
        * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
        (print_insn_shmedia): Ditto.
        2001-03-12  DJ Delorie  <dj@redhat.com>
        * sh64-opc.c: Adjust comments to reflect reality: replace bits
        3:0 with zeros (not "reserved"), replace "rrrrrr" with
        "gggggg" for two-operand floating point opcodes.  Remove
        "fsina".
        2001-01-08  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
        Correct printing of .byte:s.  Return number of printed bytes or
        -1; never 0.
        (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto.  Print as .byte:s
        to next four-byte-alignment if insn or data is not aligned.
        2001-01-06  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-dis.c: Update comments and fix comment formatting.
        (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
        Abort instead of setting length to 0.
        (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
        crange_bsearch_cmpl, sh64_get_contents_type,
        sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
        2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-opc.c: Remove #if 0:d entries for instructions not found in
        SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
        2000-12-30  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
        address with same prefix as SHcompact.
        In the disassembler, use a .cranges section for linked executables.
        * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
        and update for using structure in info->private_data.
        (struct sh64_disassemble_info): New.
        (is_shmedia_p): Delete.
        (crange_qsort_cmpb): New function.
        (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
        (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
        (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
        (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
        (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
        pair.  Display addresses for linked executables only.
        (print_insn_sh64x_media): Initialize info->private_data by calling
        init_sh64_disasm_info.
        (print_insn_sh64x): Ditto.  Find out type of contents by calling
        sh64_contents_type_disasm.  Display data regions using ".long" and
        ".byte" similar to unrecognized opcodes.
        2000-12-19  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
        information in section flags before considering symbols.  Don't
        assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
        * configure.in (bfd_sh_arch): Check presence of sh64 insns by
        matching $target $canon_targets instead of looking at the
        now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
        * configure: Regenerate.
        2000-11-25  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-opc.c (shmedia_creg_table): New.
        * sh64-opc.h (shmedia_creg_info): New type.
        (shmedia_creg_table): Declare.
        * sh64-dis.c (creg_name): New function.
        (print_insn_shmedia): Use it.
        * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
        bfd_mach_sh5 to print_insn_sh64 if big-endian and to
        print_insn_sh64l if little-endian.
        * sh64-dis.c (print_insn_shmedia): Make r unsigned.
        (print_insn_sh64l): New.
        (print_insn_sh64x): New.
        (print_insn_sh64x_media): New.
        (print_insn_sh64): Break out code to print_insn_sh64x and
        print_insn_sh64x_media.
        2000-11-24  Hans-Peter Nilsson  <hpn@cygnus.com>
        * sh64-opc.h: New file
        * sh64-opc.c: New file
        * sh64-dis.c: New file
        * Makefile.am: Add sh64 targets.
        (HFILES): Add sh64-opc.h.
        (CFILES): Add sh64-opc.c and sh64-dis.c.
        (ALL_MACHINES): Add sh64 files.
        * Makefile.in: Regenerate.
        * configure.in: Add support for sh64 to bfd_sh_arch.
        * configure: Regenerate.
        * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
        (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
        print_insn_sh64.
        * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
        * po/POTFILES.in: Regenerate.
        * po/opcodes.pot: Regenerate.

2002-02-04  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.

2002-02-04  Alexandre Oliva  <aoliva@redhat.com>

        * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.

2002-02-01  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am"
        * Makefile.in: Regenerate.

2002-01-31  Ivan Guzvinec  <ivang@opencores.org>

        * or32-dis.c: New file.
        * or32-opc.c: New file.
        * configure.in: Add support for or32.
        * configure: Regenerate.
        * Makefile.am: Add support for or32.
        * Makefile.in: Regenerate.
        * disassemble.c: Add support for or32.
        * po/POTFILES.in: Regenerate.
        * po/opcodes.pot: Regenerate.

2002-01-27  Daniel Jacobowitz  <drow@mvista.com>

        * configure: Regenerated.

2002-01-26  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/fr.po: Updated version.

2002-01-25  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/es.po: Updated version.

2002-01-24  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/da.po: New version.

2002-01-23  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/da.po: New file: Spanish translation.
        * configure.in (ALL_LINGUAS): Add da.
        * configure: Regenerate.

2002-01-22  Graydon Hoare  <graydon@redhat.com>

        * fr30-asm.c: Regenerate.
        * fr30-desc.c: Likewise.
        * fr30-desc.h: Likewise.
        * fr30-dis.c: Likewise.
        * fr30-ibld.c: Likewise.
        * fr30-opc.c: Likewise.
        * fr30-opc.h: Likewise.
        * m32r-asm.c: Likewise.
        * m32r-desc.c: Likewise.
        * m32r-desc.h: Likewise.
        * m32r-dis.c: Likewise.
        * m32r-ibld.c: Likewise.
        * m32r-opc.c: Likewise.
        * m32r-opc.h: Likewise.
        * m32r-opinst.c: Likewise.
        * openrisc-asm.c: Likewise.
        * openrisc-desc.c: Likewise.
        * openrisc-desc.h: Likewise.
        * openrisc-dis.c: Likewise.
        * openrisc-ibld.c: Likewise.
        * openrisc-opc.c: Likewise.
        * openrisc-opc.h: Likewise.
        * xstormy16-desc.c: Likewise.

2002-01-22  Richard Henderson  <rth@redhat.com>

        * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
        comparison.

2002-01-22  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.
        * opcodes/po/POTFILES.in: Regenerate.

2002-01-19  Richard Earnshaw  <rearnsha@arm.com>

        * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
        * arm-dis.c (print_insn_arm): Don't handle 'h' case.

2002-01-18  Keith Walker  <keith.walker@arm.com>

        * arm-opc.h (arm_opcodes): Add bxj instruction.

2002-01-17  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/opcodes.pot: Regenerate.
        * po/fr.po: Regenerate.
        * po/sv.po: Regenerate.
        * po/tr.po: Regenerate.

2002-01-16  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/tr.po: Import new version.

2002-01-15  Richard Earnshaw  <rearnsha@arm.com>

        * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
        * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
        VFP bitfields.

2002-01-10  matthew green  <mrg@redhat.com>

        * xstormy16-asm.c: Regenerate.
        * xstormy16-desc.c: Likewise.
        * xstormy16-desc.h: Likewise.
        * xstormy16-dis.c: Likewise.
        * xstormy16-opc.c: Likewise.
        * xstormy16-opc.h: Likewise.

2002-01-07  Nick Clifton  <nickc@cambridge.redhat.com>

        * po/es.po: New file: Spanish translation.
        * configure.in (ALL_LINGUAS): Add es.
        * configure: Regenerate.

2001-12-31  Jeffrey A Law  (law@redhat.com)

        * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
        'X', 'M', and 'A'.  No longer emit a space after 'x' or 's'.
        Always emit a space after 'H'.

2001-12-18  matthew green  <mrg@redhat.com>

        * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.

2001-12-17  Richard Henderson  <rth@redhat.com>

        * alpha-opc.c (unop): Encode with RB as $sp.

2001-12-07  Geoffrey Keating  <geoffk@redhat.com>

        * Makefile.am: Add support for xstormy16.
        * Makefile.in: Regenerate.
        * configure.in: Add support for xstormy16.
        * configure: Regenerate.
        * disassemble.c: Add support for xstormy16.
        * xstormy16-asm.c: New generated file.
        * xstormy16-desc.c: New generated file.
        * xstormy16-desc.h: New generated file.
        * xstormy16-dis.c: New generated file.
        * xstormy16-ibld.c: New generated file.
        * xstormy16-opc.c: New generated file.
        * xstormy16-opc.h: New generated file.

2001-12-06  Richard Henderson  <rth@redhat.com>

        * alpha-opc.c (alpha_opcodes): Add wh64en.

2001-12-04  Alexandre Oliva  <aoliva@redhat.com>

        * d10v-opc.c (d10v_predefined_registers): Remove warnings
        introduced in Nov 29's patch.

        * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
        unmatched register.

        * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
        predefined value.

        * d10v-opc.c (RSRC_NOSP): New macro.
        (d10v_operands): Add it.
        (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".

2001-11-29  Alexandre Oliva  <aoliva@redhat.com>

        * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
        (RSRC_SP): New macro.
        (d10v_operands): Add it.
        (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.

2001-11-23  Lars Brinkhoff  <lars@nocrew.org>

        * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
        Also, break out of the loop as soon as an instruction has been
        printed.

2001-11-17  matthew green  <mrg@redhat.com>

        * ppc-opc.c (mfvrsave, mtvrsave): New instructions.

2001-11-15  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.

        * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
        (insert_bat, extract_bat, insert_bba, extract_bba,
        insert_bd, extract_bd, insert_bdm, extract_bdm,
        insert_bdp, extract_bdp, valid_bo,
        insert_bo, extract_bo, insert_boe, extract_boe,
        insert_ds, extract_ds, insert_de, extract_de,
        insert_des, extract_des, insert_li, extract_li,
        insert_mbe, extract_mbe, insert_mb6, extract_mb6,
        insert_nb, extract_nb, insert_nsi, extract_nsi,
        insert_ral, insert_ram, insert_ras,
        insert_rbs, extract_rbs, insert_sh6, extract_sh6,
        insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
        (extract_bd, extract_bdm, extract_bdp,
        extract_ds, extract_des,
        extract_li, extract_nsi): Implement sign extension without conditional.
        (insert_bdm, extract_bdm,
        insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
        (extract_bdm, extract_bdp): Correct 32 bit validation.
        (AT1_MASK, AT2_MASK): Define.
        (BBOAT_MASK): Define.
        (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
        (BOFM64, BOFP64, BOTM64, BOTP64): Define.
        (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
        (PPCCOM32, PPCCOM64): Define.
        (powerpc_opcodes): Modify existing 32 bit insns with branch hints
        and add new patterns to implement 64 bit branches with hints.  Move
        booke instructions so they match before ppc64.

        * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
        64 bit default targets, and parse "32" and "64" in options.
        Formatting fixes.
        (print_insn_powerpc): Pass dialect to operand->extract.

2001-11-14  Dave Brolley  <brolley@redhat.com>

        * cgen-dis.c (count_decodable_bits): New function.
        (add_insn_to_hash_chain): New function.
        (hash_insn_array): Call add_insn_to_hash_chain.
        (hash_insn_list): Call add_insn_to_hash_chain.
        * m32r-dis.c: Regenerated.
        * fr30-dis.c: Regenerated.

2001-11-14  Andreas Jaeger  <aj@suse.de>

        * i386-dis.c (print_insn): Use x86-64 as option.

2001-11-14  Alan Modra  <amodra@bigpond.net.au>

        * disassemble.c (disassembler): Call print_insn_i386.
        * i386-dis.c (SUFFIX_ALWAYS): Define.
        (struct dis_private): Add orig_sizeflag.
        (print_insn_i386): Make it a wrapper, calling..
        (print_insn): ..The old body of print_insn_i386.  Avoid longjmp
        warning without using volatile by moving orig_sizeflag to priv,
        and removing inbuf.  Parse disassembler_options.
        (print_insn_i386_att, print_insn_i386_intel): Move initialisation
        code to print_insn.
        (putop): Remove #ifdef SUFFIX_ALWAYS.

2001-11-11  Timothy Wall  <twall@alum.mit.edu>

        * tic54x-dis.c: Use revised opcode structure.  Export opcode
        template lookup.
        (has_lkaddr): Don't forget about Lmem insns.
        * tic54x-opc.c: Add emulation trap.  Parallel table now uses
        standard opcode templates.

2001-11-13  Zack Weinberg <zack@codesourcery.com>

        * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
        to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
        category instead of Ew.

2001-11-12  Niraj Gupta <ngupta@zumanetworks.com>

        * m68k-opc.c: Fix definitions of wddata[bwl].

2001-11-09  Richard Sandiford  <rsandifo@redhat.com>

        * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
        fit in the buffer, try to match the empty keyword.

2001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>

        * cgen-ibld.in (extract_1): Fix badly placed #if 0.
        * fr30-ibld.c: Regenerate.
        * m32r-ibld.c: Regenerate.
        * openrisc-ibld.c: Regenerate.

2001-11-04  Chris Demetriou  <cgd@broadcom.com>

        * mips-dis.c (print_insn_mips): Remove spaces at end of line.

2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>

        * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
        * configure: Regernate.
        * po/fr.po: New file.
        * po/sv.po: New file.
        * po/tr.po: New file.

2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>

        * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
        constant as source.

2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>

        * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
        dependencies.
        * Makefile.in: Regenerate.
        * mmix-dis.c, mmix-opc.c: New files.

2001-10-29  Kazu Hirata  <kazu@hxi.com>

        * d30v-dis.c: Fix a comment typo.

2001-10-23  Chris Demetriou  <cgd@broadcom.com>

        * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
        "bltzall" as writing GPR 31 (since they do).

        * mips-dis.c (print_insn_arg): Calculate info->target
        where appropriate.
        (print_insn_mips): Fill in instruction info.
        (print_mips16_insn_arg): Remove unneded variable 'val'.
        Removed duplicated instruction target calculations,
        calculate once and print that result.  Use same idiom for
        masking the jump segment bits as is used in print_insn_arg.

2001-10-20  Alan Modra  <amodra@bigpond.net.au>

        * ppc-opc.c (CT): Make it an optional operand.

2001-10-17  Chris Demetriou  <cgd@broadcom.com>

        * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
        SB-1 binaries include instructions specific to the SB-1.
        * mips-opc.c (SB1): New definition.
        (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
        "recip.ps", "rsqrt.ps", and "sqrt.ps".

2001-10-17  matthew green  <mrg@redhat.com>

        * ppc-opc.c (STRM): New AltiVec operand.
        (XDSS): New AltiVec instruction form.
        (mtvscr): Correct operand list.
        (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.

2001-10-17  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.

2001-10-13  matthew green  <mrg@redhat.com>

        * ppc-opc.c (MO): New macro for MO field of mbar instruction.
        (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
        mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.

2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>

        * cgen-ibld.in: Include safe-ctype.h in preference to
        ctype.h.
        * cgen-asm.in: Include safe-ctype.h in preference to
        ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
        TOLOWER instead of tolower.
        (@arch@_cgen_build_insn_regex): Remove duplication of syntax
        string elements in constructed regular expression.
        * fr30-asm.c: Regenerate.
        * fr30-desc.c: Regenerate.
        * fr30-ibld.c: Regenerate.
        * m32r-asm.c: Regenerate.
        * m32r-desc.c: Regenerate.
        * m32r-ibld.c: Regenerate.
        * openrisc-asm.c: Regenerate.
        * openrisc-desc.c: Regenerate.
        * openrisc-ibld.c: Regenerate.
        * po/opcodes.pot: Regenerate.

2001-10-12  matthew green  <mrg@redhat.com>

        * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
        instruction field instruction/extraction functions for new BookE
        DE form instructions.
        (CT): New macro for CT field in an X form instruction.
        (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
        instructions.
        (PPC64): Don't include PPC_OPCODE_PPC.
        (403): New opcode macro for PPC403 processors.
        (BOOKE): New opcode macro for BookE processors.
        (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
        (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
        (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
        (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
        (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
        (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
        (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
        (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
        (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
        (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
        (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
        (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
        (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
        (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.

        * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
        for a disassembler option of `booke', `booke32' or `booke64' to enable
        BookE support in the disassembler.

2001-10-12  John Healy  <jhealy@redhat.com>

        * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
        for the length when extracting the base part of the insn.

2001-10-09  Bruno Haible  <haible@clisp.cons.org>

        * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
        regular expression.  Fix some formatting problems.
        * fr30-asm.c: Regenerate.
        * openrisc-asm.c: Regenerate.
        * m32r-asm.c: Regenerate.

2001-10-09  Christian Groessler <cpg@aladdin.de>

        * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
        of indirect register memory accesses to be same format the
        assembler accepts.

2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>

        * sh-opc.h: Fix encoding of least significant nibble of the
        DSP single data transfer instructions.

        * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
        instructions.

2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>

        * cgen-asm.in: Fix compile time warning messages in generated
        C files.
        * cgen-dis.in: The same.
        * cgen-ibld.in: The same.
        * fr30-asm.c: Regenerate.
        * fr30-desc.c: Regenerate.
        * fr30-dis.c: Regenerate.
        * fr30-ibld.c: Regenerate.
        * fr30-opc.c: Regenerate.
        * m32r-asm.c: Regenerate.
        * m32r-desc.c: Regenerate.
        * m32r-dis.c: Regenerate.
        * m32r-ibld.c: Regenerate.
        * m32r-opc.c: Regenerate.
        * m32r-opinst.c Regenerate.
        * openrisc-asm.c: Regenerate.
        * openrisc-desc.c: Regenerate.
        * openrisc-dis.c: Regenerate.
        * openrisc-ibld.c: Regenerate.
        * openrisc-opc.c: Regenerate.
        * openrisc-opc.h: Regenerate.
        * Makefile.in: Regenerate.
        * po/POTFILES.in: Regenerate.
        * po/opcodes.pot: Regenerate.

2001-10-08  Aldy Hernandez  <aldyh@redhat.com>

        * arm-opc.h (arm_opcodes): Add cirrus insns.

        * arm-dis.c (print_insn_arm): Add 'I' case.

2001-10-03  Alan Modra  <amodra@bigpond.net.au>

        * po/POTFILES.in: Regenerate.
        * configure: Regenerate.

2001-10-02  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am (Makefile): Depend on bfd/configure.in.
        Run "make dep-am".
        * Makefile.in: Regenerate.

2001-09-30  John Healy  <jhealy@redhat.com>

        * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
        calls to cgen_get_insn_value and cgen_put_insn_value calls.
        (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.

2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>

        * Makefile.am: Update dependencies with "make dep-am".
        * Makefile.in: Regenerate.

2001-09-26  Alan Modra  <amodra@bigpond.net.au>

        * arc-dis.c: Formatting fixes.
        (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.

2001-09-21  Bruno Haible  <haible@clisp.cons.org>

        * arc-dis.c: Don't include <ctype.h>.
        * openrisc-desc.c: Likewise.
        * openrisc-ibld.c: Likewise.

2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>

        * fr30-opc.c: Fix compile time warning messages.
        * i370-opc.c: Fix compile time warning messages.
        * i960-dis.c: Fix compile time warning messages.
        * m32r-asm.c: Fix compile time warning messages.
        * m32r-desc.c: Fix compile time warning messages.
        * m32r-dis.c: Fix compile time warning messages.
        * m32r-ibld.c: Fix compile time warning messages.
        * m32r-opc.c: Fix compile time warning messages.
        * m32r-opinst.c: Fix compile time warning messages.
        * ns32k-dis.c: Fix compile time warning messages.
        * openrisc-asm.c: Fix compile time warning messages.
        * openrisc-desc.c: Fix compile time warning messages.
        * openrisc-dis.c: Fix compile time warning messages.
        * openrisc-ibld.c: Fix compile time warning messages.
        * openrisc-opc.c: Fix compile time warning messages.
        * pdp11-dis.c: Fix compile time warning messages.
        * tic54x-dis.c: Fix compile time warning messages.
        * v850-opc.c: Fix compile time warning messages.
        * vax-dis.c: Fix compile time warning messages.
        * w65-opc.h: Fix compile time warning messages.
        * z8k-opc.h: Fix compile time warning messages.
        * z8kgen.c: Fix compile time warning messages.

2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>

        * arm-dis.c:   Fix compile time warning messages.
        * cgen-asm.c:  Fix compile time warning messages.
        * cgen-dis.c:  Fix compile time warning messages.
        * cris-dis.c:  Fix compile time warning messages.
        * d10v-dis.c:  Fix compile time warning messages.
        * fr30-asm.c:  Fix compile time warning messages.
        * fr30-desc.c: Fix compile time warning messages.
        * fr30-dis.c:  Fix compile time warning messages.
        * fr30-ibld.c: Fix compile time warning messages.

2001-09-18  Bruno Haible  <haible@clisp.cons.org>

        * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
        (cgen_parse_keyword): Use ISALNUM instead of isalnum.
        * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
        (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
        isalpha/tolower.
        (cgen_keyword_add): Use ISALNUM instead of isalnum.
        (hash_keyword_name): Use TOLOWER instead of tolower.
        * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
        (parse_insn_normal): Use TOLOWER/ISSPACE instead of
        tolower/isspace.
        (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
        * fr30-desc.c: Don't include <ctype.h>.
        * fr30-ibld.c: Likewise.
        * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
        (load_insn_classes, parse_resource_users, load_depfile): Use
        ISSPACE instead of isspace.
        * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
        (parse_insn_normal): Use TOLOWER/ISSPACE instead of
        tolower/isspace.
        (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
        * m32r-desc.c: Don't include <ctype.h>.
        * m32r-ibld.c: Likewise.
        * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
        (parse_insn_normal): Use TOLOWER/ISSPACE instead of
        tolower/isspace.
        (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.

2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>

        * Makefile.am: Add rules and dependencies to create the s/390 opcode
        table out of s390-opc.txt automatically.
        * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
        * s390-mkopc.c (dumpTable): Change output to create a complete file.
        * s390-opc.c: New improved opcode format macros and remove the
        pregenerated opcode table.
        * s390-opc.txt: Adapt to new improved opcode format macros.

2001-09-14  David Schleef <ds@schleef.org>

        * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.

2001-09-04  Alan Modra  <amodra@bigpond.net.au>

        * i386-dis.c (grps): Don't print the implicit al/ax/eax register
        for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.

2001-08-31  Eric Christopher  <echristo@redhat.com>
            Jason Eckhardt    <jle@redhat.com>

        * mips-dis.c: Add support for bfd_mach_mipsisa32 and
        bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
        bfd_mach_mips64.

2001-08-31  Andreas Jaeger  <aj@suse.de>

        * tic54x-opc.c: Add default initializers to avoid warnings.

        * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
        * arc-ext.c: Likewise.

2001-08-28  matthew gren  <mrg@redhat.com>

        * ppc-opc.c (icbt): Order correctly.

2001-08-27  David Edelsohn  <dje@watson.ibm.com>
            Torbjorn Granlund  <tege@swox.com>

        * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
        (LS): Define.
        (insert_ds): Complain if not a multiple of 4.
        (XSYNC): Define.
        (XSYNC_MASK): Define.
        (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
        "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.

2001-08-26  Andreas Jaeger  <aj@suse.de>

        * h8500-opc.h: Add default initializers to h8500_table to shut up
        GCC warnings.

2001-08-25  Andreas Jaeger  <aj@suse.de>

        * tic54x-dis.c: Add unused attributes where needed.

        * z8k-dis.c (output_instr): Add unused attribute.

        * h8300-dis.c: Add missing prototypes.
        (bfd_h8_disassemble): Make static.

        * cris-dis.c: Add missing prototype.
        * h8500-dis.c: Likewise.
        * m68hc11-dis.c: Likewise.
        * pj-dis.c: Likewise.
        * tic54x-dis.c: Likewise.
        * v850-dis.c: Likewise.
        * vax-dis.c: Likewise.
        * w65-dis.c: Likewise.
        * z8k-dis.c: Likewise.

        * d10v-dis.c: Add missing prototype.
        (dis_long): Remove unused variable.
        (dis_2_short): Likewise.

        * sh-dis.c: Add missing prototypes.
        * v850-opc.c: Likewise.
        Add unused attributes where needed.

        * ns32k-dis.c: Add missing prototypes.
        (bit_extract_simple): Remove unused variable.

2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * opcodes/s390-opc.c: Add "low or high" and "not low or high"
        branch instructions for gcc 3.0.
        * opcodes/s390-opc.txt: Likewise.

2001-08-21  Andreas Jaeger  <aj@suse.de>

        * i960-dis.c: Add parameters for prototypes
        (ctrl): Add unused attributes.
        (cobr): Likewise.
        (put_abs): Likewise.

        * mips-dis.c: Add missing prototypes.
        * a29k-dis.c: Likewise.
        * arc-dis.c: Likewise.
        * ia64-opc.c: Likewise.

        * s390-dis.c: Add missing prototypes.
        (init_disasm): Remove unused attribute since the parameter is
        used.

2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * mips-opc.c (M1): Define. Reformatted Code.
        (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
        mtps, mtps. Typo.

2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>

        * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
        the corresponding non-likely insn is in MIPS I.

2001-08-13  Kazu Hirata  <kazu@hxi.com>

        * mcore-dis.c: Fix formatting.
        * mips-dis.c: Likewise.
        * pj-dis.c: Likewise.
        * z8k-dis.c: Likewise.

2001-08-12  Richard Henderson  <rth@redhat.com>

        * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
        to *VALUEP.  Regenerate all cgen files.

2001-08-10  Richard Sandiford  <rsandifo@redhat.com>

        * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
        argument.
        * mips-opc.c (G6): Undefine.
        (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
        as the first "move" alternative.

2001-08-10  Andreas Jaeger  <aj@suse.de>

        * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
        to build warnings.
        * configure: Regenerate.

2001-08-10  Alan Modra  <amodra@bigpond.net.au>

        * ppc-opc.c: Revert 2001-08-08.

2001-08-09  Alan Modra  <amodra@bigpond.net.au>

        * dis-buf.c (generic_strcat_address): Add missing prototype.
        #if 0 the functions as it is unused.

2001-08-08  Alan Modra  <amodra@bigpond.net.au>

        1999-10-25  Torbjorn Granlund  <tege@swox.com>
        * ppc-opc.c: Include "bfd.h".
        (powerpc_operands): Add new field for reloc type.

2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * mips-dis.c (print_insn_arg): Don't use software integer registers
        for coprocessor registers.
        (get_mips_isa): Removed.
        (is_newabi): New function, checks if NewABI is used.
        (_print_insn_mips): Get distinction between old ABI and new ABI right.

2001-08-01  Christian Groessler <cpg@aladdin.de>

        * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
        get stderr definition.
        (internal, gas): Removed warnings.
        (gas): Create a correct final entry for created array.
        * z8k-opc.h: Recreated with new z8kgen.

2001-07-28  Kazu Hirata  <kazu@hxi.com>

        * i386-dis.c: Fix formatting.

2001-07-28  Matthias Kramm <kramm@quiss.org>

        * i386-dis.c: Change formatting conventions for architecture
        i386:intel to better match the format of various intel i386
        assemblers, like nasm, tasm or masm.

2001-07-24  Alan Modra  <amodra@bigpond.net.au>

        * Makefile.am: Update dependencies with "make dep-am".
        * Makefile.in: Regenerate

2001-07-24  Kazu Hirata  <kazu@hxi.com>

        * alpha-dis.c: Fix formatting.
        * cris-dis.c: Likewise.
        * d10v-dis.c: Likewise.
        * d30v-dis.c: Likewise.
        * m10300-dis.c: Likewise.
        * tic54x-dis.c: Likewise.

2001-07-23  Kazu Hirata  <kazu@hxi.com>

        * m68k-dis.c: Fix formatting.
        * pj-dis.c: Likewise.
        * s390-dis.c: Likewise.
        * z8k-dis.c: Likewise.

2001-07-21  Chris Demetriou  <cgd@broadcom.com>

        * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
        into the rest of the surrounding definitions.

2001-07-18  Alan Modra  <amodra@bigpond.net.au>

        * i386-dis.c (grps): Print l or w suffix, and require mem modrm
        for lgdt, lidt, sgdt, sidt.

2001-07-13  Philip Blundell  <philb@gnu.org>

        * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.

2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>

        * cgen-asm.in: Include "xregex.h" always to enable the libiberty
        regex support.
        (@arch@_cgen_build_insn_regex): New routine from Graydon.
        (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
        to verify if it is worth parsing the insn as insn "x".  Also update
        error message when insn is not a recognized format of the insn vs
        when the insn is completely unrecognized.

2001-07-11  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
        bfd_get_bits.
        * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
        non-zero CGEN_CPU_DESC->insn_chunk_bitsize.

2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>

        * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
        (OP_J): Use bfd_vma for mask to work properly with 64 bits.
        (op_address,op_riprel): Use bfd_vma to handle 64 bits.

2001-07-05  Ben Elliston  <bje@redhat.com>

        * Makefile.am (CPUDIR): Define.
        (stamp-m32r): Update dependencies.
        (stamp-fr30): Ditto.
        (stamp-openrisc): Ditto.
        * Makefile.in: Regenerate.

2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>

        * ppc-opc.c: Fix encoding of 'clf' instruction.

2001-06-30  Geoffrey Keating  <geoffk@redhat.com>

        * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.

2001-06-28  Geoffrey Keating  <geoffk@redhat.com>

        * cgen-asm.c (cgen_parse_keyword): Allow any first character.
        * cgen-opc.c (cgen_keyword_add): Ignore special first
        character when building nonalpha_chars field.

2001-06-24  Ben Elliston  <bje@redhat.com>

        * m88k-dis.c: Format to conform to GNU coding standards.

2001-06-23  Andreas Jaeger  <aj@suse.de>

        * disassemble.c (disassembler_usage): Add unused attribute.

2001-06-22  Eric Christopher  <echristo@redhat.com>

        * mips-opc.c: Move prefx to start of the table.

2001-06-22  Stacey Sheldon <ssheldon@Catena.com>

        * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
        instruction.

2001-06-22  Pauli <pauli@moreton.com.au>

        * m68k-opc.c: Add wdebug instruction.

2001-06-15  Aldy Hernandez  <aldyh@redhat.com>

        * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.

2001-06-14  Geoffrey Keating  <geoffk@redhat.com>

        * cgen-asm.c (cgen_parse_keyword): When looking for the
        boundaries of a keyword, allow any special characters
        that are actually in one of the allowed keyword.
        * cgen-opc.c (cgen_keyword_add): Add any special characters
        to the nonalpha_chars field.

2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>

        * s390-opc.c: Add lgh instruction.
        * s390-opc.txt: Likewise.

2001-06-11  Alan Modra  <amodra@bigpond.net.au>

        * i386-dis.c: Group function prototypes in one place.
        (FLOATCODE): Redefine as 1.
        (USE_GROUPS): Redefine as 2.
        (USE_PREFIX_USER_TABLE): Redefine as 3.
        (X86_64_SPECIAL): Define as 4.
        (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
        (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
        (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
        (dis386): New table combining above four tables.
        (dis386_twobyte_att, dis386_twobyte_intel): Delete.
        (dis386_twobyte): New table combining above two tables.
        (x86_64_table): New table to handle x86_64.
        (X86_64_0): Define.
        (float_mem_att, float_mem_intel): Delet.
        (float_mem): New table combining above two tables.
        (print_insn_i386): Modify for above.
        (dofloat): Likewise.
        (putop): Handle '{', '|' and '}' to select alternative mnemonics.
        Return 0 on success, 1 if no valid alternative.
        (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
        (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
        (putop <case 'I'>): Move to case 'T', and share case 'P' code.
        (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
        if not 64-bit mode.
        (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
        (OP_I64): If not 64-bit mode, call OP_I.
        OP_OFF64): If not 64-bit mode, call OP_OFF.
        (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
        'ignore'/'ignored' to 'bytemode'.

2001-06-10  Alan Modra  <amodra@bigpond.net.au>

        * configure.in: Sort 'ta' case statement.
        * configure: Regenerate.

        * i386-dis.c (dis386_att): Add 'H' to conditional branch and
        loop,jcxz insns.
        (disx86_64_att): Likewise.
        (dis386_twobyte_att): Likewise.
        (print_insn_i386): Don't print branch hints as a prefix.
        (putop): 'H' macro prints branch hints.
        (get64): Kill compile warnings.

2001-06-09  Alexandre Oliva  <aoliva@redhat.com>

        * sh-opc.h (sh_table): Don't use empty initializers.

2001-06-06  Christian Groessler <cpg@aladdin.de>

        * z8k-dis.c: Fix formatting.
        (unpack_instr): Remove unused cases in switch statement. Add
        safety abort() in default case.
        (unparse_instr): Add safety abort() in default case.

2001-06-06  Peter Jakubek <pjak@snafu.de>

        * m68k-dis.c (print_insn_m68k): Fix typo.
        * m68k-opc.c (m68k_opcodes): Correct allowed operands for
        mcf (ColdFire) div, rem and moveb instructions.

2001-06-06  Alan Modra  <amodra@bigpond.net.au>

        * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
        (cond_jump_mode, loop_jcxz_mode): Define.
        (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
        appropriate, and 'F' suffix to loop insns.
        (disx86_64_att): Likewise.
        (dis386_twobyte_att): Likewise.
        (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
        Output data size prefix for long conditional jumps.  Output cs and
        ds branch hints.
        (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
        (OP_J): Don't make PREFIX_DATA used.

2001-06-04  Alexandre Oliva  <aoliva@redhat.com>

        * sh-opc.h (sh_table): Complete last element entry to avoid
        compiler warning.

2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * mips-dis.c (mips_isa_type): Add MIPS r12k support.

2001-05-23  Alan Modra  <amodra@one.net.au>

        * arc-opc.c: Whitespace changes.

2001-05-18  Hans-Peter Nilsson  <hp@axis.com>

        * cris-opc.c (cris_spec_regs): Add missing initializer field for
        last element.

2001-05-15  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-dis.in (extract_normal): Complete support for min<base case.

2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * mips-dis.c (INSNLEN): Rename MAXLEN.
        (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
        (print_insn_arg): Remove $ prefix of register names.
        (set_mips_isa_type): Remove.
        (mips_isa_type): New function.
        (get_mips_isa): New Function.
        (print_insn_mips): Rename _print_insn_mips.
        (_print_insn_mips): New function, contains code which was
        duplicated in print_insn_big_mips and print_insn_little_mips.
        (print_insn_big_mips): Moved code to _print_insn_mips.
        (print_insn_little_mips): Likewise.
        (print_mips16_insn_arg): Remove $ prefix of register names.
        Print error message before abort.

2001-05-14  J.T. Conklin  <jtc@redback.com>

        * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
        simplified mnemonics used for setting PPC750-specific special
        purpose registers.

2001-05-12  H.J. Lu  <hjl@gnu.org>

        * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
        `rm'.

2001-05-12  Peter Targett  <peter.targett@arccores.com>

        * arc-opc.c (arc_reg_names): Correct attribute for lp_count
        register to r/w.  Formatting fixes throughout file.

2001-05-12  Alan Modra  <amodra@one.net.au>

        * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
        movq operands.
        (twobyte_has_modrm): Update table.
        (need_modrm): Give it file scope.
        (MODRM_CHECK): Define.
        (dofloat): Use MODRM_CHECK.
        (OP_E): Likewise.
        (OP_EM): Likewise.
        (OP_EX): Likewise.

2001-05-07  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-dis.in (default_print_insn): Tolerate min<base instructions
        even at end of a section.
        * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
        by ignoring precariously-unpacked insn_value in favor of raw buffer.

2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>

        * disassemble.c (disassembler_usage): Remove unused attribute.

2001-05-04  Frank Ch. Eigler  <fche@redhat.com>

        * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.

2001-05-04  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
        assume incoming buffer already has the base insn loaded.  Handle
        smaller-than-base instructions for variable-length case.

2001-05-04  Alan Modra  <amodra@one.net.au>

        * i386-dis.c (Ev, Ed): Remove duplicate define.
        (Gd): Define.
        (XS): Define.
        (OP_XS): New function.
        (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
        movmskp operands.
        (dis386_twobyte_intel): Likewise.
        (prefix_user_table): Use MS for maskmovq operand.

2001-04-27  Johan Rydberg  <jrydberg@opencores.org>

        * Makefile.am: Add OpenRISC target.
        * Makefile.in: Regenerated.

        * disassemble.c (disassembler): Recognize the OpenRISC disassembly.

        * configure.in (bfd_openrisc_arch): Add target.
        * configure: Regenerated.

        * openrisc-asm.c: New file.
        * openrisc-desc.c: Likewise.
        * openrisc-desc.h: Likewise.
        * openrisc-dis.c: Likewise.
        * openrisc-ibld.c: Likewise.
        * openrisc-opc.c: Likewise.
        * openrisc-opc.h: Likewise.

2001-04-24  Christian Groessler  <cpg@aladdin.de>

        * z8k-dis.c: add names of control registers (ctrl_names);
        (seg_length): provides instruction length fixup for segmented
        mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
        CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
        (unparse_intr): handle CLASS_PR, print addresses without '#'
        * z8k-opc.h: re-created with new z8kgen
        * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
        entries for ldctl/ldctlb instruction

2001-04-06  Andreas Jaeger  <aj@suse.de>

        * i386-dis.c: Add ffreep instruction.

2001-03-30  Alexandre Oliva  <aoliva@redhat.com>

        * ppc-opc.c (insert_mbe): Shift mask initializer as long.

2001-03-24  Alan Modra  <alan@linuxcare.com.au>

        * i386-dis.c (PREGRP25): Define.
        (dis386_twobyte_att): Use here in place of "movntq" entry.
        (dis386_twobyte_intel): Likewise.
        (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
        (PREGRP26): Define.
        (dis386_twobyte_att): Use here.
        (dis386_twobyte_intel): Likewise.
        (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
        (prefix_user_table <maskmovdqu>): XM operand, not MX.
        (prefix_user_table): Cosmetic changes to "bad" entries.

2001-03-23  Nick Clifton  <nickc@redhat.com>

        * mips-opc.c: Remove extraneous whitespace.
        * mips-dis.c: Remove extraneous whitespace.

2001-03-22  Ben Elliston  <bje@redhat.com>

        * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
        declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
        * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
        to allay a compiler warning.

2001-03-22  Alan Modra  <alan@linuxcare.com.au>

        * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
        (dis386_twobyte_intel): Likewise.
        (twobyte_has_modrm): Set entry for paddq, psubq.

2001-03-20  Patrick Macdonald  <patrickm@redhat.com>

        * cgen-dis.in (print_insn_@arch@): Add support for target machine
        determination via CGEN_COMPUTE_MACH.
        * fr30-desc.c: Regenerate.
        * fr30-dis.c: Regenerate.
        * fr30-opc.h: Regenerate.
        * m32r-desc.c: Regenerate.
        * m32r-dis.c: Regenerate.
        * m32r-opc.h: Regenerate.
        * m32r-opinst.c: Regenerate.

2001-03-20  H.J. Lu  <hjl@gnu.org>

        * configure.in: Remove the redundent AC_ARG_PROGRAM.
        * configure: Rebuild.

2001-03-19  Jim Wilson  <wilson@redhat.com>

        * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
        notestr if larger than xsect.
        (in_class): Handle format M5.
        * ia64-asmtab.c: Regnerate.

2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>

        * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
        has more than one byte left to read.

2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>

        * s390-opc.c: Add new opcodes.  Smooth out formatting.
        * s390-opc.txt: Add new opcodes.

2001-03-06  Nick Clifton  <nickc@redhat.com>

        * arm-dis.c (print_insn_thumb): Compute destination address
        of BLX(1) instruction by taking bit 1 from PC and not from bit
        0 of the offset.

2001-03-06  Igor Shevlyakov  <igor@windriver.com>

        * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
        so command line switches will work.

2001-03-05  Dave Brolley  <brolley@redhat.com>

        * fr30-asm.c: Regenerate.
        * fr30-desc.c: Regenerate.
        * fr30-desc.h: Regenerate.
        * fr30-dis.c: Regenerate.
        * fr30-ibld.c: Regenerate.
        * fr30-opc.c: Regenerate.
        * fr30-opc.h: Regenerate.
        * m32r-asm.c: Regenerate.
        * m32r-desc.c: Regenerate.
        * m32r-desc.h: Regenerate.
        * m32r-dis.c: Regenerate.
        * m32r-ibld.c: Regenerate.
        * m32r-opc.c: Regenerate.
        * m32r-opc.h: Regenerate.
        * m32r-opinst.c: Regenerate.

2001-02-28  Igor Shevlyakov  <igor@windriver.com>

        * m68k-opc.c: fix cpushl according to Motorola. Enable
        bunch of instructions for Coldfire 5407 and add all new.

2001-02-27  Alan Modra  <alan@linuxcare.com.au>

        * configure.in (BFD_VERSION): Do without grep.
        * configure: Regenerate.
        * Makefile.am: Run "make dep-am".
        * Makefile.in: Regenerate.

2001-02-23  David Mosberger  <davidm@hpl.hp.com>

        * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
        * ia64-asmtab.c: Regenerate.

2001-02-21  David Mosberger  <davidm@hpl.hp.com>

        * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
        separate variants: one for IMM22 and the other for IMM14.
        * ia64-asmtab.c: Regenerate.

2001-02-21  Greg McGary  <greg@mcgary.org>

        * cgen-opc.c (cgen_get_insn_value): Add missing `return'.

2001-02-20  H.J. Lu  <hjl@gnu.org>

        * Makefile.am (ia64-ic.tbl): Remove the target.
        (ia64-raw.tbl): Likewise.
        (ia64-waw.tbl): Likewise.
        (ia64-war.tbl): Likewise.
        (ia64-asmtab.c): Generate it in the source directory.
        * Makefile.in: Regenerated.

2001-02-18  lars brinkhoff  <lars@nocrew.org>

        * Makefile.am: Add PDP-11 target.
        * configure.in: Likewise.
        * disassemble.c: Likewise.
        * pdp11-dis.c: New file.
        * pdp11-opc.c: New file.

2001-02-14  Jim Wilson  <wilson@redhat.com>

        * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
        * ia64-asmtab.c: Regenerate.

Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>

        * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
        instructions.
        (putop): Handle 'Y'

2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>

        * mips-dis.c (print_insn_arg): Use top four bits of the address of
        the following instruction not of the jump itself for the jump
        target.
        (print_mips16_insn_arg): Likewise.

2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
        directory.
        * Makefile.in: Regenerate.

2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>

        * Makefile.am: Add linux target for S/390.
        * Makefile.in: Likewise.
        * configure.in: Likewise.
        * disassemble.c: Likewise.
        * s390-dis.c: New file.
        * s390-mkopc.c: New file.
        * s390-opc.c: New file.
        * s390-opc.txt: New file.

2001-02-05  Jim Wilson  <wilson@redhat.com>

        * ia64-asmtab.c: Revert 2000-12-16 change.

2001-02-02  Patrick Macdonald  <patrickm@redhat.com>

        * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
        * m32r-desc.h: Regenerate.

Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>

        * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
        (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax

2001-01-14  Alan Modra  <alan@linuxcare.com.au>

        * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.

2001-01-13  Nick Clifton  <nickc@redhat.com>

        * disassemble.c: Remove spurious white space.

Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>

        * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
        templates.

2001-01-11  Peter Targett  <peter.targett@arccores.com>

        * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
        * Makefile.am (C_FILES): Add arc-ext.c.
        (ALL_MACHINES) Add arc-ext.lo.
        (INCLUDES) Add opcode directory to list.
        New dependency entry for arc-ext.lo.
        * disassemble.c (disassembler): Correct call to
        arc_get_disassembler.
        * arc-opc.c: New update for ARC, including full base
        instructions for ARC variants.
        * arc-dis.h, arc-dis.c: New update for ARC, including
        extensibility functionality.
        * arc-ext.h, arc-ext.c: New files for handling extensibility.

2001-01-10  Jan Hubicka  <jh@suse.cz>

        * i386-dis.c (PREGRP15 - PREGRP24): New.
        (dis386_twobyt): Add SSE2 instructions.
        (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
        (twobyte_uses_f3_prefix): ... this one.
        (grps): Add SSE instructions.
        (prefix_user_table): Add two new slots; add SSE2 instructions.
        (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
        Handle the REPNZ and Data16 prefixes as well; do proper lookup
        to prefix_user_table.
        (OP_E): Accept mfence and lfence as well.
        (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
        (OP_XMM): Support REX extensions.
        (OP_EM): Likewise.
        (OP_EX): Likewise.

2001-01-09  Nick Clifton  <nickc@redhat.com>

        * arm-dis.c (print_insn): Set pc to zero for instructions with
        a reloc associated with them.

2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>

        * cgen-asm.in (parse_insn_normal): Changed syn to be
        CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
        as character to use CGEN_SYNTAX_CHAR macro and all comparisons
        to '\0' to use 0 instead.
        * cgen-dis.in (print_insn_normal): Ditto.
        * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.

2001-01-05  Jan Hubicka  <jh@suse.cz>

        * i386-dis.c: Add x86_64 support.
        (rex): New static variable.
        (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
        (USED_REX): New macro.
        (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
        (OP_I64, OP_OFF64, OP_IMREG): New functions.
        (OP_REG, OP_OFF): Declare.
        (get64, get32, get32s): New functions.
        (r??_reg): New constants.
        (dis386_att): Change templates of instruction implicitly promoted
        to 64bit; change e?? to RMe?? for unwind RM byte instructions.
        (grps): Likewise.
        (dis386_intel): Likewise.
        (dixx86_64_att): New table based on dis386_att.
        (dixx86_64_intel): New table based on dis386_intel.
        (names64, names8rex): New global variable.
        (names32, names16): Add extended registers.
        (prefix_user_t): Recognize rex prefixes.
        (prefix_name): Print REX prefixes nicely.
        (op_riprel): New global variable.
        (start_pc): Set type to bfd_vma.
        (print_insn_i386): Detect the 64bit mode and use proper table;
        move ckprefix after initializing the buffer; output unused rex prefixes;
        output information about target of RIP relative addresses.
        (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
        (print_operand_value): New function.
        (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
        REX prefix and new modes.
        (get64, get32s): New.
        (get32): Return bfd_signed_vma type.
        (set_op): Initialize the op_riprel.
        * disassemble.c (disassembler): Recognize the x86-64 disassembly.

2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>

         cgen-dis.in (read_insn): Use bfd_get_bits()

2001-01-02  Richard Sandiford  <rsandifo@redhat.com>

        * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
        (hash_insn_list): Likewise
        * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
        (extract_1): Use bfd_get_bits().
        (extract_normal): Apply sign extension to both extraction
        methods.
        * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
        (cgen_put_insn_value): Use bfd_put_bits()

2000-12-28  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-asm.in (parse_insn_normal): Print better error message for
        instructions with missing operands.

2000-12-21  Santeri Paavolainen <santtu@ssh.com>

        * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.

2000-12-16  Nick Clifton  <nickc@redhat.com>

        * Makefile.in: Regenerate.
        * aclocal.m4: Regenerate.
        * config.in: Regenerate.
        * configure.in: Add spacing.
        * configure: Regenerate.
        * ia64-asmtab.c: Regenerate.
        * po/opcodes.pot: Regenerate.

2000-12-12  Frank Ch. Eigler  <fche@redhat.com>

        * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
        error messages over later parse-time ones.

2000-12-12  Jim Wilson  <wilson@redhat.com>

        * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
        argument.
        * ia64-gen.c (insert_deplist): Cast sizeof result to int.
        (print_dependency_table): Print NULL if semantics field not set.
        (insert_opcode_dependencies): Mark cmp parameter as unused.
        (print_main_table): Use fprintf_vma to print long long fields.
        (main): Mark argv paramter as unused.  Convert to old style definition.
        * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
        * ia64-asmtab.c: Regnerate.

2000-12-09  Nick Clifton  <nickc@redhat.com>

        * m32r-dis.c (print_insn): Prevent re-read of instruction from
        wrong address.

        * fr30-dis.c: Regenerate.

2000-12-08  Peter Targett  <peter.targett@arccores.com>

        * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
        * Makefile.am (C_FILES): Add arc-ext.c.
        (ALL_MACHINES) Add arc-ext.lo.
        (INCLUDES) Add opcode directory to list.
        New dependency entry for arc-ext.lo.
        * disassemble.c (disassembler): Correct call to
        arc_get_disassembler.
        * arc-opc.c: New update for ARC, including full base
        instructions for ARC variants.
        * arc-dis.h, arc-dis.c: New update for ARC, including
        extensibility functionality.
        * arc-ext.h, arc-ext.c: New files for handling extensibility.

2000-12-03  Chris Demetriou   cgd@sibyte.com

        * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
        MOD_HILO, and MOD_LO macros.

        * mips-opc.c (M1, M2): Delete.
        (mips_builtin_opcodes): Remove all uses of M1.

        * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
        instructions take "G" format second operands and use the
        correct flags.
        There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
        match.
        Delete "sel" code operands from mfc1 and mtc1.
        Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
        for dm[ft]c[023].

2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
            Chris Demetriou   cgd@sibyte.com

        * mips-opc.c (mips_builtin_opcodes): Finish additions
        for MIPS32 support, and clean up existing entries for
        aesthetics, consistency with the MIPS32 ISA, and
        with consistency the rest of the table.

2000-12-01  Nick Clifton  <nickc@redhat.com>

        * mips16-opc.c (mips16_opcodes): Add initialiser for membership
        field.

2000-12-01  Chris Demetriou <cgd@sibyte.com>

        mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
        specifiers.  Update 'B' for new constant names, and remove
        'm'.
        mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
        near the top of the array, so they are disassembled properly.
        Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
        code for MIPS32.  Update "clo" and "clz" to use 'U' operand
        specifier.  Add 'H' format specifier variants for "mfc1,"
        "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
        MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
        "wait" variant which uses 'J' operand specifier.

        * mips-dis.c (set_mips_isa_type): Update to use
        CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
        Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
        * mips-opc.c (I32): New constant for instructions added in
        MIPS32.
        (P4): Delete.
        (mips_builtin_opcodes) Replace all uses of P4 with I32.

        * mips-dis.c (set_mips_isa_type): Add cases for
        bfd_mach_mips5 and bfd_mach_mips64.
        * mips-opc.c (I64): New definitions.

        * mips-dis.c (set_mips_isa_type): Add case for
        bfd_mach_mips_sb1.

2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>

        * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
        (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
        Initialize variable dc to NULL.
        (print_insn_shx): Remove unused label d_reg_n.

2000-11-24  Nick Clifton  <nickc@redhat.com>

        * arm-opc.h: Add new opcode formatting parameter 'B'.
        (arm_opcodes): Add XScale, v5, and v5te instructions.
        (thumb_opcodes): Add v5t instructions.

        * arm-dis.c (print_insn_arm): Handle new 'B' format
        parameter.
        (print_insn_thumb): Decode BLX(1) instruction.

2000-11-21  Chris Demetriou  <cgd@sibyte.com>

        * mips-opc.c: Fix file header comment.

2000-11-14  Hans-Peter Nilsson  <hp@axis.com>

        * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
        print_insn_cris_with_register_prefix.

2000-11-11  Alexandre Oliva  <aoliva@redhat.com>

        * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.

2000-11-07  Matthew Green  <mrg@redhat.com>

        * cgen-dis.in (print_insn): All insns which can fit into insn_value
        must be loaded there in their entirety.

2000-10-20  Jakub Jelinek  <jakub@redhat.com>

        * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
        (compute_arch_mask): Add v8plusb and v9b machines.
        (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
        * sparc-opc.c: Support for Cheetah instruction set.
        (prefetch_table): Add #invalidate.

2000-10-16  Nick Clifton  <nickc@redhat.com>

        * mcore-dis.c (imsk): Change mask for OC to 0xFE00.

2000-10-06  Dave Brolley  <brolley@redhat.com>

        * fr30-desc.h: Regenerate.
        * m32r-desc.h: Regenerate.
        * m32r-ibld.c: Regenerate.

2000-10-05  Jim Wilson  <wilson@redhat.com>

        * ia64-ic.tbl: Update from Intel.
        * ia64-asmtab.c: Regenerate.

2000-10-04  Kazu Hirata  <kazu@hxi.com>

        * ia64-gen.c: Convert C++-style comments to C-style comments.
        * tic54x-dis.c: Likewise.

2000-09-29  Hans-Peter Nilsson  <hp@axis.com>

        Changes to add dollar prefix to registers for files where user symbols
        don't have a leading underscore.  Fix formatting.
        * cris-dis.c (REGISTER_PREFIX_CHAR): New.
        (format_reg): Add parameter with_reg_prefix.  All callers changed.
        (print_with_operands): Ditto.
        (print_insn_cris_generic): Renamed from print_insn_cris, add
        parameter with_reg_prefix.
        (print_insn_cris_with_register_prefix,
        print_insn_cris_without_register_prefix, cris_get_disassembler):
        New.
        * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.

2000-09-22  Jim Wilson  <wilson@redhat.com>

        * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
        gt, ge, ngt, and nge.
        * ia64-asmtab.c: Regenerate.

        * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
        * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
        (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
        * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
        * ia64-asmtab.c: Regnerate.

2000-09-13  Anders Norlander  <anorland@acc.umu.se>

        * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
        Add mfc0 and mtc0 with sub-selection values.
        Add clo and clz opcodes.
        Add msub and msubu instructions for MIPS32.
        Add madd/maddu aliases for mad/madu for MIPS32.
        Support wait, deret, eret, movn, pref for MIPS32.
        Support tlbp, tlbr, tlbwi, tlbwr.
        (P4): New define.

        * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
        (print_insn_arg): Handle 'H' args.
        (set_mips_isa_type): Recognize 4K.
        Use CPU_* defines instead of hardcoded numbers.

2000-09-11  Catherine Moore <clm@redhat.com>

        * d30v-opc.c (d30v_operand_t): New operand type Rb2.
        (d30v_format_tab): Use Rb2 for modinc and moddec.

2000-09-07  Catherine Moore  <clm@redhat.com>

        * d30v-opc.c (d30v_format_tab): Use format Ra for
        modinc and moddec.

2000-09-06  Alexandre Oliva  <aoliva@redhat.com>

        * configure: Rebuilt with new libtool.m4.

2000-09-05  Nick Clifton  <nickc@redhat.com>

        * configure: Regenerate.
        * po/opcodes.pot: Regenerate.

2000-08-31  Alexandre Oliva  <aoliva@redhat.com>

        * acinclude.m4: Include libtool and gettext macros from the
        top level.
        * aclocal.m4, configure: Rebuilt.

2000-08-30  Kazu Hirata  <kazu@hxi.com>

        * tic80-dis.c: Fix formatting.

2000-08-29  Kazu Hirata  <kazu@hxi.com>

        * w65-dis.c: Fix formatting.

2000-08-28  Mark Hatle  <mhatle@mvista.com>

        * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
        (powerpc_opcodes): Add table entries for PPC 405 instructions.
        Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
        instructions.  Added extended mnemonic mftbl as defined in the
        405GP manual for all PPCs.

2000-08-28  Jim Wilson  <wilson@redhat.com>

        * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
        call.  Change last goto to use failed instead of done.

2000-08-28  Dave Brolley  <brolley@redhat.com>

        * cgen-ibld.in (cgen_put_insn_int_value): New function.
        (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
        (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
        (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
        * cgen-dis.in (read_insn): New static function.
        (print_insn): Use read_insn to read the insn into the buffer and set
        up for disassembly.
        (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
        in the buffer.
        * fr30-asm.c: Regenerated.
        * fr30-desc.c: Regenerated.
        * fr30-desc.h: Regenerated.
        * fr30-dis.c: Regenerated.
        * fr30-ibld.c: Regenerated.
        * fr30-opc.c: Regenerated.
        * fr30-opc.h: Regenerated.
        * m32r-asm.c: Regenerated.
        * m32r-desc.c: Regenerated.
        * m32r-desc.h: Regenerated.
        * m32r-dis.c: Regenerated.
        * m32r-ibld.c: Regenerated.
        * m32r-opc.c: Regenerated.

2000-08-28  Kazu Hirata  <kazu@hxi.com>

        * tic30-dis.c: Fix formatting.

2000-08-27  Kazu Hirata  <kazu@hxi.com>

        * sh-dis.c: Fix formatting.

2000-08-24  David Edelsohn  <dje@watson.ibm.com>

        * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.

2000-08-24  Kazu Hirata  <kazu@hxi.com>

        * z8k-dis.c: Fix formatting.

2000-08-16  Jim Wilson  <wilson@redhat.com>

        * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
        break, mov-immediate, nop.
        * ia64-opc-f.c: Delete fpsub instructions.
        * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
        address operand.  Rewrite using macros to avoid long lines.
        * ia64-opc.h (POSTINC): Define.
        * ia64-asmtab.c: Regenerate.

2000-08-15  Jim Wilson  <wilson@redhat.com>

        * ia64-ic.tbl: Add missing entries.

2000-08-08  Jason Eckhardt  <jle@redhat.com>

        * i860-dis.c (print_br_address): Change third argument from int
        to long.

2000-08-07  Richard Henderson  <rth@redhat.com>

        * ia64-dis.c (print_insn_ia64): Get byte skip count correct
        for MLI templates.  Handle IA64_OPND_TGT64.

2000-08-04  Ben Elliston  <bje@redhat.com>

        * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
        * cgen.sh: Likewise.

2000-08-02  Jim Wilson  <wilson@redhat.com>

        * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.

2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>

        * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
        Change return type from void to int.  Check the combination
        of operands, return 1 if valid.  Fix to avoid BUF overflow.
        Report undefined combinations of operands in COMMENT.
        Report internal errors to stderr.  Output the adiw/sbiw
        constant operand in both decimal and hex.
        (print_insn_avr): Disassemble ldd/std with displacement of 0
        as ld/st.  Check avr_operand () return value, handle invalid
        combinations of operands like unknown opcodes.

2000-07-28  Ben Elliston  <bje@redhat.com>

        * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
        (run-cgen, stamp-m32r, stamp-fr30): New targets.
        * Makefile.in: Regenerate.
        * configure.in: Add --enable-cgen-maint option.
        * configure: Regenerate.

2000-07-26  Dave Brolley  <brolley@redhat.com>

        * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
        (cgen_hw_lookup_by_num): Ditto.
        (cgen_operand_lookup_by_name): Ditto.
        (print_address): Ditto.
        (print_keyword): Ditto.
        * cgen-dis.c (hash_insn_array): Mark unused parameters with
        ATTRIBUTE_UNUSED.
        * cgen-asm.c (hash_insn_array): Mark unused parameters with
        ATTRIBUTE_UNUSED.
        (cgen_parse_keyword): Ditto.

2000-07-22  Jason Eckhardt  <jle@redhat.com>

        * i860-dis.c: New file.
        (print_insn_i860): New function.
        (print_br_address): New function.
        (sign_extend): New function.
        (BITWISE_OP): New macro.
        (I860_REG_PREFIX): New macro.
        (grnames, frnames, crnames): New structures.

        * disassemble.c (ARCH_i860): Define.
        (disassembler): Add check for bfd_arch_i860 to set disassemble
        function to print_insn_i860.

        * Makefile.in (CFILES): Added i860-dis.c.
        (ALL_MACHINES): Added i860-dis.lo.
        (i860-dis.lo): New dependences.

        * configure.in: New bits for bfd_i860_arch.

        * configure: Regenerated.

2000-07-20  Hans-Peter Nilsson  <hp@axis.com>

        * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
        (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
        (cris-dis.lo, cris-opc.lo): New rules.
        * Makefile.in: Rebuild.
        * configure.in (bfd_cris_arch): New target.
        * configure: Rebuild.
        * disassemble.c (ARCH_cris): Define.
        (disassembler): Support ARCH_cris.
        * cris-dis.c, cris-opc.c: New files.
        * po/POTFILES.in, po/opcodes.pot: Regenerate.

2000-07-11  Jakub Jelinek  <jakub@redhat.com>

        * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
        Reported by Bill Clarke <llib@computer.org>.

2000-07-09  Geoffrey Keating  <geoffk@redhat.com>

        * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
        Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.

2000-07-09  Alan Modra  <alan@linuxcare.com.au>

        * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
        fput_const, extract_3, extract_5_load, extract_5_store,
        extract_5r_store, extract_5R_store, extract_10U_store,
        extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
        extract_12, extract_17, extract_22): Prototype.
        (print_insn_hppa): Rename inner block opcode -> opc to avoid
        shadowing outer block.
        (GET_BIT): Define.

2000-07-05  DJ Delorie  <dj@redhat.com>

        * MAINTAINERS: new

2000-07-04  Alexandre Oliva  <aoliva@redhat.com>

        * arm-dis.c (print_insn_arm): Output combinations of PSR flags.

2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>

        * avr-dis.c (avr_operand): Change _ () to _() around all strings
        marked for translation (exception from the usual coding style).
        (print_insn_avr): Initialize insn2 to avoid warnings.

2000-07-03  Kazu Hirata  <kazu@hxi.com>

        * h8300-dis.c (bfd_h8_disassemble): Improve readability.
        * h8500-dis.c: Fix formatting.

2000-07-01  Alan Modra  <alan@linuxcare.com.au>

        * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
        (CLEANFILES): Add DEPA.
        * Makefile.in: Regenerate.

2000-06-26  Scott Bambrough  <scottb@netwinder.org>

        * arm-dis.c (regnames): Add an additional register set to match
        the set used by GCC.  Make it the default.

2000-06-22  Alan Modra  <alan@linuxcare.com.au>

        * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
        find one.
        * Makefile.in: Regenerate.

2000-06-20  H.J. Lu  <hjl@gnu.org>

        * Makefile.am: Rebuild dependency.
        * Makefile.in: Rebuild.

2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>

        * Makefile.in, configure: regenerate
        * disassemble.c (disassembler): Recognize ARCH_m68hc12,
        ARCH_m68hc11.
        * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
        New functions.
        * configure.in: Recognize m68hc12 and m68hc11.
        * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
        * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
        and opcode generation for m68hc11 and m68hc12.

2000-06-16  Nick Duffek  <nsd@redhat.com>

        * disassemble.c (disassembler): Refer to the PowerPC 620 using
        bfd_mach_ppc_620 instead of 620.

2000-06-12  Kazu Hirata  <kazu@hxi.com>

        * h8300-dis.c: Fix formatting.
        (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
        correctly.

2000-06-09  Denis Chertykov  <denisc@overta.ru>

        * avr-dis.c (avr_operand): Bugfix for jmp/call address.

2000-06-07  Denis Chertykov  <denisc@overta.ru>

        * avr-dis.c: completely rewritten.

2000-06-02  Kazu Hirata  <kazu@hxi.com>

        * h8300-dis.c: Follow the GNU coding style.
        (bfd_h8_disassemble) Fix a typo.

2000-06-01  Kazu Hirata  <kazu@hxi.com>

        * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
        (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
        correctly.  Fix a typo.

2000-05-31  Nick Clifton  <nickc@redhat.com>

        * opintl.h (_(String)): Explain why dgettext is used instead of
        gettext.

2000-05-30  Nick Clifton  <nickc@redhat.com>

        * opintl.h (gettext, dgettext, dcgettext, textdomain,
        bindtextdomain): Replace defines with those from intl/libgettext.h
        to quieten gcc warnings.

2000-05-26  Alan Modra  <alan@linuxcare.com.au>

        * Makefile.am: Update dependencies with "make dep-am"
        * Makefile.in: Regenerate.

2000-05-25  Alexandre Oliva  <aoliva@redhat.com>

        * m10300-dis.c (disassemble): Don't assume 32-bit longs when
        sign-extending operands.

2000-05-15  Donald Lindsay  <dlindsay@redhat.com>

        * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
        except brf's.

2000-05-21  Nick Clifton  <nickc@redhat.com>

        * Makefile.am (LIBIBERTY): Define.

2000-05-19 Diego Novillo <dnovillo@redhat.com>

        * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
        (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
        (reg_names): Rename to std_reg_names. Change it to a char **
        static variable.
        (std_reg_names): New name for reg_names.
        (set_mips_isa_type): Set reg_names to point to std_reg_names by
        default.

2000-05-16  Frank Ch. Eigler  <fche@redhat.com>

        * fr30-desc.h: Partially regenerated to account for changed
        CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
        * m32r-desc.h: Ditto.

2000-05-15  Nick Clifton  <nickc@redhat.com>

        * arm-opc.h: Use upper case for flasg in MSR and MRS
        instructions.  Allow any bit to be set in the field_mask of
        the MSR instruction.

        * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
        field_mask of an MSR instruction.

2000-05-11  Thomas de Lellis  <tdel@windriver.com>

        * arm-opc.h: Disassembly of thumb ldsb/ldsh
        instructions changed to ldrsb/ldrsh.

2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>

        * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
        target addresses for 'jal' and 'j'.

2000-05-10  Geoff Keating  <geoffk@redhat.com>

        * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
        also available in common mode when powerpc syntax is being used.

2000-05-08  Alan Modra  <alan@linuxcare.com.au>

        * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
        (dummy_print_address): Ditto.

2000-05-04  Timothy Wall  <twall@redhat.com>

        * tic54x-opc.c: New.
        * tic54x-dis.c: New.
        * disassemble.c (disassembler): Add ARCH_tic54x.
        * configure.in: Added tic54x target.
        * configure: Ditto.
        * Makefile.am: Add tic54x dependencies.
        * Makefile.in: Ditto.

2000-05-03  J.T. Conklin  <jtc@redback.com>

        * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
        vector unit operands.
        (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
        unit instruction formats.
        (PPCVEC): New macro, mask for vector instructions.
        (powerpc_operands): Add table entries for above operand types.
        (powerpc_opcodes): Add table entries for vector instructions.

        * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
        (print_insn_little_powerpc): Likewise.
        (print_insn_powerpc): Prepend 'v' when printing vector registers.

2000-04-24  Clinton Popetz  <cpopetz@redhat.com>

        * configure.in: Add bfd_powerpc_64_arch.
        * disassemble.c (disassembler): Use print_insn_big_powerpc for
        64 bit code.

2000-04-24  Nick Clifton  <nickc@redhat.com>

        * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
        field.

2000-04-23  Denis Chertykov  <denisc@overta.ru>

        * avr-dis.c (reg_fmul_d): New. Extract destination register from
        FMUL instruction.
        (reg_fmul_r): New. Extract source register from FMUL instruction.
        (reg_muls_d): New. Extract destination register from MULS instruction.
        (reg_muls_r): New. Extract source register from MULS instruction.
        (reg_movw_d): New. Extract destination register from MOVW instruction.
        (reg_movw_r): New. Extract source register from MOVW instruction.
        (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
        EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.

2000-04-22  Timothy Wall  <twall@redhat.com>

        * ia64-gen.c (general): Add an ordered table of primary
        opcode names, as well as priority fields to disassembly data
        structures to enforce a preferred disassembly format based on the
        ordering of the opcode tables.
        (load_insn_classes): Show a useful message if IC tables are missing.
        (load_depfile): Ditto.
        * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
        distinguish preferred disassembly.
        * ia64-opc-f.c: Reorder some insn for preferred disassembly
        format.  Fix incorrect flag on fma.s/fma.s.s0.
        * ia64-opc.c: Scan *all* disassembly matches and use the one with
        the highest priority.
        * ia64-opc-b.c: Use more abbreviations.
        * ia64-asmtab.c: Regenerate.

2000-04-21  Jason Eckhardt  <jle@redhat.com>

        * hppa-dis.c (extract_16): New function.
        (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
        new operand types l,y,&,fe,fE,fx.

2000-04-21  Richard Henderson  <rth@redhat.com>
            David Mosberger  <davidm@hpl.hp.com>
            Timothy Wall <twall@redhat.com>
            Bob Manson  <manson@charmed.cygnus.com>
            Jim Wilson  <wilson@redhat.com>

        * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
        (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
        ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
        ia64-asmtab.c.
        (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
        (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
        ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
        * Makefile.in: Rebuild.
        * configure Rebuild.
        * configure.in (bfd_ia64_arch): New target.
        * disassemble.c (ARCH_ia64): Define.
        (disassembler): Support ARCH_ia64.
        * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
        ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
        ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
        ia64-war.tbl, ia64-waw.tbl: New files.

2000-04-20  Alexandre Oliva  <aoliva@redhat.com>

        * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
        (disassemble): Use them.

2000-04-14  Alan Modra  <alan@linuxcare.com.au>

        * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
        * Makefile.am: Update dependencies.
        * Makefile.in: Regenerate.

2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>

        * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
        avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
        disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
        i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
        m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
        mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
        ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
        tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
        w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
        ansidecl.h as sysdep.h includes it.

2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>

        * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
        --enable-build-warnings option.
        * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
        * Makefile.in, configure: Re-generate.

2000-04-05  J"orn Rennecke <amylaar@redhat.com>

        * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
        stc GBR,@-<REG_N> is available for arch_sh1_up.
        Group parallel processing insn with identical mnemonics together.
        Make three-operand psha / pshl come first.

2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>

        * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
        Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
        (sh_arg_type): Add A_PC.
        (sh_table): Update entries using immediates.  Add repeat.
        * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
        Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.

2000-04-04  Alan Modra  <alan@linuxcare.com.au>

        * po/opcodes.pot: Regenerate.

        * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
        (DEP): Quote when passing vars to sub-make.  Add warning message
        to end.
        (DEP1): Rewrite for "gcc -MM".
        (CLEANFILES): Add DEP2.
        Update dependencies.
        * Makefile.in: Regenerate.

2000-04-03  Denis Chertykov  <denisc@overta.ru>

        * avr-dis.c: Syntax cleanup.
        (add0fff): Print the pc relative address as a signed number.
        (add03f8): Likewise.

2000-04-01  Ian Lance Taylor  <ian@zembu.com>

        * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
        the parameter ATTRIBUTE_UNUSED.
        * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.

2000-04-01  Alexandre Oliva  <aoliva@redhat.com>

        * m10300-opc.c: SP-based offsets are always unsigned.

2000-03-29  Thomas de Lellis  <tdel@windriver.com>

        * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
        [branch always] instead of "undefined".

2000-03-27  Nick Clifton  <nickc@redhat.com>

        * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
        short instructions, from end of list of long instructions.

2000-03-27  Ian Lance Taylor  <ian@zembu.com>

        * Makefile.am (CFILES): Add avr-dis.c.
        (ALL_MACHINES): Add avr-dis.lo.

2000-03-27  Alan Modra  <alan@linuxcare.com>

        * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
        truncate integers.
        (print_insn_avr): Call function via pointer in K&R compatible way.
        (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
        add0fff, add03f8): Convert to old style function declaration and
        add prototype.
        (avrdis_opcode): Add prototype.

2000-03-27  Denis Chertykov  <denisc@overta.ru>

        * avr-dis.c: New file.  AVR disassembler.
        * configure.in (bfd_avr_arch): New architecture support.
        * disassemble.c: Likewise.
        * configure: Regenerate.

2000-03-06  J"oern Rennecke <amylaar@redhat.com>

        * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.

2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>

        * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
        flag to determine if operand is pc-relative.
        * d30v-opc.c:
        (d30v_format_table):
        (REL6S3): Renamed from IMM6S3.
        Added flag OPERAND_PCREL.
        (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
        added flag OPERAND_PCREL.
        (IMM12S3U): Replaced with REL12S3.
        (SHORT_D2, LONG_D): Delay target is pc-relative.
        (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
        Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
        using the REL* operands.
        (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
        (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
        LONG_Db, using REL* operands.
        (SHORT_U, SHORT_A5S): Removed stray alternatives.
        (d30v_opcode_table): Use new *r formats.

2000-02-28  Nick Clifton  <nickc@redhat.com>

        * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
        'signed_overflow_ok_p'.

2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>

        * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
        name of the libtool directory.
        * Makefile.in: Rebuild.

2000-02-24  Nick Clifton  <nickc@redhat.com>

        * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
        (cgen_clear_signed_overflow_ok): New function.
        (cgen_signed_overflow_ok_p): New function.

2000-02-23  Andrew Haley  <aph@redhat.com>

        * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
        m32r-ibld.c, m32r-opc.h: Rebuild.

2000-02-23  Linas Vepstas <linas@linas.org>

        * i370-dis.c, i370-opc.c: New.

        * disassemble.c (ARCH_i370): Define.
        (disassembler): Handle it.

        * Makefile.am: Add support for Linux/IBM 370.
        * configure.in: Likewise.

        * Makefile.in: Regenerate.
        * configure: Likewise.

2000-02-22  Chandra Chavva   <cchavva@redhat.com>

        * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
        ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
        procedure.

2000-02-22  Andrew Haley  <aph@redhat.com>

        * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
        force gp32 to zero.
        * mips-opc.c (G6): New define.
        (mips_builtin_op): Add "move" definition for -gp32.

2000-02-22  Ian Lance Taylor  <ian@zembu.com>

        From Grant Erickson <gerickso@Brocade.COM>:
        * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.

2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>

        * dis-buf.c (buffer_read_memory): Change `length' param and all int
        vars to unsigned.

2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>

        * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
        (print_insn_ppi): Likewise.
        (print_insn_shx): Use info->mach to select appropriate insn set.
        Add support for sh-dsp.  Remove FD_REG_N support.
        * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
        (sh_arg_type): Likewise.  Remove FD_REG_N.
        (sh_dsp_reg_nums): New enum.
        (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
        (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
        (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
        (arch_sh3_dsp_up): Likewise.
        (sh_opcode_info): New field: arch.
        (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
        D_REG_N.  Fill in arch field.  Add sh-dsp insns.

2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>

        * arm-dis.c: Change flavor name from atpcs-special to
        special-atpcs to prevent name conflict in gdb.
        (get_arm_regname_num_options, set_arm_regname_option,
        get_arm_regnames): New functions.  API to access the several
        flavor of register names.  Note: Used by gdb.
        (print_insn_thumb): Use the register name entry from the currently
        selected flavor for LR and PC.

2000-02-10  Nick Clifton  <nickc@redhat.com>

        * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
        classes.
        (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
        "mulsh.h" instructions.
        * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
        classes.
        (print_insn_mcore): Add support for little endian targets.
        Add support for MULSH and OPSR classes.

2000-02-07  Nick Clifton  <nickc@redhat.com>

        * arm-dis.c (parse_arm_diassembler_option): Rename again.
        Previous delat did not take.

2000-02-03  Timothy Wall  <twall@redhat.com>

        * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
        to adjust target address bounds checking and calculate the
        appropriate octet offset into data.

2000-01-27  Nick Clifton  <nickc@redhat.com>

        * arm-dis.c: (parse_disassembler_option): Rename to
        parse_arm_disassembler_option and allow to be exported.

        * disassemble.c (disassembler_usage): New function: Print out any
        target specific disassembler options.
        Call arm_disassembler_options() if the ARM architecture is being
        supported.

        * arm-dis.c (NUM_ELEM): Define this macro if not already
        defined.
        (arm_regname): New struct type for ARM register names.
        (arm_toggle_regnames): Delete.
        (parse_disassembler_option): Use register name structure.
        (print_insn): New function: Combines duplicate code found in
        print_insn_big_arm and print_insn_little_arm.
        (print_insn_big_arm): Call print_insn.
        (print_insn_little_arm): Call print_insn.
        (print_arm_disassembler_options): Display list of supported,
        ARM specific disassembler options.

2000-01-27  Thomas de Lellis  <tdel@windriver.com>

        * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
        ARM_STT_16BIT flag as Thumb code symbols.

        * arm-dis.c (printf_insn_little_arm): Ditto.

2000-01-25  Thomas de Lellis  <tdel@windriver.com>

        * arm-dis.c (printf_insn_thumb): Prevent double dumping
        of raw thumb instructions.

2000-01-20  Nick Clifton  <nickc@redhat.com>

        * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".

2000-01-03  Nick Clifton  <nickc@cygnus.com>

        * arm-dis.c (streq): New macro.
        (strneq): New macro.
        (force_thumb): ew local variable.
        (parse_disassembler_option): New function: Parse a single, ARM
        specific disassembler command line switch.
        (parse_disassembler_option): Call parse_disassembler_option to
        parse individual command line switches.
        (print_insn_big_arm): Check force_thumb.
        (print_insn_little_arm): Check force_thumb.

For older changes see ChangeLog-9899
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: