1 2002-02-19 matthew green <mrg@redhat.com>
3 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
6 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
8 * po/tr.po: Updated translation.
10 2002-02-15 Richard Henderson <rth@redhat.com>
12 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
15 2002-02-15 Richard Henderson <rth@redhat.com>
17 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
20 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
22 * po/da.po: Updated translation.
24 2002-02-12 Graydon Hoare <graydon@redhat.com>
26 * cgen-asm.in (parse_insn_normal): Change call from
27 @arch@_cgen_parse_operand to cd->parse_operand, to
28 facilitate CGEN_ASM_INIT_HOOK doing useful work.
30 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
32 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
35 2002-02-11 Alan Modra <amodra@bigpond.net.au>
37 * Makefile.am: "make dep-am".
38 * Makefile.in: Regenerate.
39 * aclocal.m4: Regenerate.
40 * config.in: Regenerate.
41 * configure: Regenerate.
43 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
45 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
46 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
48 * configure: Regenerate.
50 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
52 * cgen-dis.c: Add prototypes for count_decodable_bits
53 and add_insn_to_hash_chain.
55 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
57 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
60 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
62 * or32-opc.c: Fix compile time warning messages.
63 * or32-dis.c: Fix compile time warning messages.
65 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
68 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
69 * sh64-opc.c: Regenerate.
70 2001-03-13 DJ Delorie <dj@redhat.com>
71 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
72 purpose is more obvious.
73 * sh64-opc.c (shmedia_table): Ditto.
74 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
75 (print_insn_shmedia): Ditto.
76 2001-03-12 DJ Delorie <dj@redhat.com>
77 * sh64-opc.c: Adjust comments to reflect reality: replace bits
78 3:0 with zeros (not "reserved"), replace "rrrrrr" with
79 "gggggg" for two-operand floating point opcodes. Remove
81 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
82 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
83 Correct printing of .byte:s. Return number of printed bytes or
85 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
86 to next four-byte-alignment if insn or data is not aligned.
87 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
88 * sh64-dis.c: Update comments and fix comment formatting.
89 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
90 Abort instead of setting length to 0.
91 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
92 crange_bsearch_cmpl, sh64_get_contents_type,
93 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
94 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
95 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
96 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
97 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
98 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
99 address with same prefix as SHcompact.
100 In the disassembler, use a .cranges section for linked executables.
101 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
102 and update for using structure in info->private_data.
103 (struct sh64_disassemble_info): New.
104 (is_shmedia_p): Delete.
105 (crange_qsort_cmpb): New function.
106 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
107 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
108 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
109 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
110 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
111 pair. Display addresses for linked executables only.
112 (print_insn_sh64x_media): Initialize info->private_data by calling
113 init_sh64_disasm_info.
114 (print_insn_sh64x): Ditto. Find out type of contents by calling
115 sh64_contents_type_disasm. Display data regions using ".long" and
116 ".byte" similar to unrecognized opcodes.
117 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
118 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
119 information in section flags before considering symbols. Don't
120 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
121 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
122 matching $target $canon_targets instead of looking at the
123 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
124 * configure: Regenerate.
125 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
126 * sh64-opc.c (shmedia_creg_table): New.
127 * sh64-opc.h (shmedia_creg_info): New type.
128 (shmedia_creg_table): Declare.
129 * sh64-dis.c (creg_name): New function.
130 (print_insn_shmedia): Use it.
131 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
132 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
133 print_insn_sh64l if little-endian.
134 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
135 (print_insn_sh64l): New.
136 (print_insn_sh64x): New.
137 (print_insn_sh64x_media): New.
138 (print_insn_sh64): Break out code to print_insn_sh64x and
139 print_insn_sh64x_media.
140 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
141 * sh64-opc.h: New file
142 * sh64-opc.c: New file
143 * sh64-dis.c: New file
144 * Makefile.am: Add sh64 targets.
145 (HFILES): Add sh64-opc.h.
146 (CFILES): Add sh64-opc.c and sh64-dis.c.
147 (ALL_MACHINES): Add sh64 files.
148 * Makefile.in: Regenerate.
149 * configure.in: Add support for sh64 to bfd_sh_arch.
150 * configure: Regenerate.
151 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
152 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
154 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
155 * po/POTFILES.in: Regenerate.
156 * po/opcodes.pot: Regenerate.
158 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
160 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
162 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
164 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
166 2002-02-01 Alan Modra <amodra@bigpond.net.au>
168 * Makefile.am: Run "make dep-am"
169 * Makefile.in: Regenerate.
171 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
173 * or32-dis.c: New file.
174 * or32-opc.c: New file.
175 * configure.in: Add support for or32.
176 * configure: Regenerate.
177 * Makefile.am: Add support for or32.
178 * Makefile.in: Regenerate.
179 * disassemble.c: Add support for or32.
180 * po/POTFILES.in: Regenerate.
181 * po/opcodes.pot: Regenerate.
183 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
185 * configure: Regenerated.
187 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
189 * po/fr.po: Updated version.
191 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
193 * po/es.po: Updated version.
195 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
197 * po/da.po: New version.
199 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
201 * po/da.po: New file: Spanish translation.
202 * configure.in (ALL_LINGUAS): Add da.
203 * configure: Regenerate.
205 2002-01-22 Graydon Hoare <graydon@redhat.com>
207 * fr30-asm.c: Regenerate.
208 * fr30-desc.c: Likewise.
209 * fr30-desc.h: Likewise.
210 * fr30-dis.c: Likewise.
211 * fr30-ibld.c: Likewise.
212 * fr30-opc.c: Likewise.
213 * fr30-opc.h: Likewise.
214 * m32r-asm.c: Likewise.
215 * m32r-desc.c: Likewise.
216 * m32r-desc.h: Likewise.
217 * m32r-dis.c: Likewise.
218 * m32r-ibld.c: Likewise.
219 * m32r-opc.c: Likewise.
220 * m32r-opc.h: Likewise.
221 * m32r-opinst.c: Likewise.
222 * openrisc-asm.c: Likewise.
223 * openrisc-desc.c: Likewise.
224 * openrisc-desc.h: Likewise.
225 * openrisc-dis.c: Likewise.
226 * openrisc-ibld.c: Likewise.
227 * openrisc-opc.c: Likewise.
228 * openrisc-opc.h: Likewise.
229 * xstormy16-desc.c: Likewise.
231 2002-01-22 Richard Henderson <rth@redhat.com>
233 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
236 2002-01-22 Alan Modra <amodra@bigpond.net.au>
238 * Makefile.am: Run "make dep-am".
239 * Makefile.in: Regenerate.
240 * opcodes/po/POTFILES.in: Regenerate.
242 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
244 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
245 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
247 2002-01-18 Keith Walker <keith.walker@arm.com>
249 * arm-opc.h (arm_opcodes): Add bxj instruction.
251 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
253 * po/opcodes.pot: Regenerate.
254 * po/fr.po: Regenerate.
255 * po/sv.po: Regenerate.
256 * po/tr.po: Regenerate.
258 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
260 * po/tr.po: Import new version.
262 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
264 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
265 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
268 2002-01-10 matthew green <mrg@redhat.com>
270 * xstormy16-asm.c: Regenerate.
271 * xstormy16-desc.c: Likewise.
272 * xstormy16-desc.h: Likewise.
273 * xstormy16-dis.c: Likewise.
274 * xstormy16-opc.c: Likewise.
275 * xstormy16-opc.h: Likewise.
277 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
279 * po/es.po: New file: Spanish translation.
280 * configure.in (ALL_LINGUAS): Add es.
281 * configure: Regenerate.
283 2001-12-31 Jeffrey A Law (law@redhat.com)
285 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
286 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
287 Always emit a space after 'H'.
289 2001-12-18 matthew green <mrg@redhat.com>
291 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
293 2001-12-17 Richard Henderson <rth@redhat.com>
295 * alpha-opc.c (unop): Encode with RB as $sp.
297 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
299 * Makefile.am: Add support for xstormy16.
300 * Makefile.in: Regenerate.
301 * configure.in: Add support for xstormy16.
302 * configure: Regenerate.
303 * disassemble.c: Add support for xstormy16.
304 * xstormy16-asm.c: New generated file.
305 * xstormy16-desc.c: New generated file.
306 * xstormy16-desc.h: New generated file.
307 * xstormy16-dis.c: New generated file.
308 * xstormy16-ibld.c: New generated file.
309 * xstormy16-opc.c: New generated file.
310 * xstormy16-opc.h: New generated file.
312 2001-12-06 Richard Henderson <rth@redhat.com>
314 * alpha-opc.c (alpha_opcodes): Add wh64en.
316 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
318 * d10v-opc.c (d10v_predefined_registers): Remove warnings
319 introduced in Nov 29's patch.
321 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
324 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
327 * d10v-opc.c (RSRC_NOSP): New macro.
328 (d10v_operands): Add it.
329 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
331 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
333 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
334 (RSRC_SP): New macro.
335 (d10v_operands): Add it.
336 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
338 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
340 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
341 Also, break out of the loop as soon as an instruction has been
344 2001-11-17 matthew green <mrg@redhat.com>
346 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
348 2001-11-15 Alan Modra <amodra@bigpond.net.au>
350 * po/POTFILES.in: Regenerate.
352 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
353 (insert_bat, extract_bat, insert_bba, extract_bba,
354 insert_bd, extract_bd, insert_bdm, extract_bdm,
355 insert_bdp, extract_bdp, valid_bo,
356 insert_bo, extract_bo, insert_boe, extract_boe,
357 insert_ds, extract_ds, insert_de, extract_de,
358 insert_des, extract_des, insert_li, extract_li,
359 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
360 insert_nb, extract_nb, insert_nsi, extract_nsi,
361 insert_ral, insert_ram, insert_ras,
362 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
363 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
364 (extract_bd, extract_bdm, extract_bdp,
365 extract_ds, extract_des,
366 extract_li, extract_nsi): Implement sign extension without conditional.
367 (insert_bdm, extract_bdm,
368 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
369 (extract_bdm, extract_bdp): Correct 32 bit validation.
370 (AT1_MASK, AT2_MASK): Define.
371 (BBOAT_MASK): Define.
372 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
373 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
374 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
375 (PPCCOM32, PPCCOM64): Define.
376 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
377 and add new patterns to implement 64 bit branches with hints. Move
378 booke instructions so they match before ppc64.
380 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
381 64 bit default targets, and parse "32" and "64" in options.
383 (print_insn_powerpc): Pass dialect to operand->extract.
385 2001-11-14 Dave Brolley <brolley@redhat.com>
387 * cgen-dis.c (count_decodable_bits): New function.
388 (add_insn_to_hash_chain): New function.
389 (hash_insn_array): Call add_insn_to_hash_chain.
390 (hash_insn_list): Call add_insn_to_hash_chain.
391 * m32r-dis.c: Regenerated.
392 * fr30-dis.c: Regenerated.
394 2001-11-14 Andreas Jaeger <aj@suse.de>
396 * i386-dis.c (print_insn): Use x86-64 as option.
398 2001-11-14 Alan Modra <amodra@bigpond.net.au>
400 * disassemble.c (disassembler): Call print_insn_i386.
401 * i386-dis.c (SUFFIX_ALWAYS): Define.
402 (struct dis_private): Add orig_sizeflag.
403 (print_insn_i386): Make it a wrapper, calling..
404 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
405 warning without using volatile by moving orig_sizeflag to priv,
406 and removing inbuf. Parse disassembler_options.
407 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
409 (putop): Remove #ifdef SUFFIX_ALWAYS.
411 2001-11-11 Timothy Wall <twall@alum.mit.edu>
413 * tic54x-dis.c: Use revised opcode structure. Export opcode
415 (has_lkaddr): Don't forget about Lmem insns.
416 * tic54x-opc.c: Add emulation trap. Parallel table now uses
417 standard opcode templates.
419 2001-11-13 Zack Weinberg <zack@codesourcery.com>
421 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
422 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
423 category instead of Ew.
425 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
427 * m68k-opc.c: Fix definitions of wddata[bwl].
429 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
431 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
432 fit in the buffer, try to match the empty keyword.
434 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
436 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
437 * fr30-ibld.c: Regenerate.
438 * m32r-ibld.c: Regenerate.
439 * openrisc-ibld.c: Regenerate.
441 2001-11-04 Chris Demetriou <cgd@broadcom.com>
443 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
445 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
447 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
448 * configure: Regernate.
449 * po/fr.po: New file.
450 * po/sv.po: New file.
451 * po/tr.po: New file.
453 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
455 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
458 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
460 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
462 * Makefile.in: Regenerate.
463 * mmix-dis.c, mmix-opc.c: New files.
465 2001-10-29 Kazu Hirata <kazu@hxi.com>
467 * d30v-dis.c: Fix a comment typo.
469 2001-10-23 Chris Demetriou <cgd@broadcom.com>
471 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
472 "bltzall" as writing GPR 31 (since they do).
474 * mips-dis.c (print_insn_arg): Calculate info->target
476 (print_insn_mips): Fill in instruction info.
477 (print_mips16_insn_arg): Remove unneded variable 'val'.
478 Removed duplicated instruction target calculations,
479 calculate once and print that result. Use same idiom for
480 masking the jump segment bits as is used in print_insn_arg.
482 2001-10-20 Alan Modra <amodra@bigpond.net.au>
484 * ppc-opc.c (CT): Make it an optional operand.
486 2001-10-17 Chris Demetriou <cgd@broadcom.com>
488 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
489 SB-1 binaries include instructions specific to the SB-1.
490 * mips-opc.c (SB1): New definition.
491 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
492 "recip.ps", "rsqrt.ps", and "sqrt.ps".
494 2001-10-17 matthew green <mrg@redhat.com>
496 * ppc-opc.c (STRM): New AltiVec operand.
497 (XDSS): New AltiVec instruction form.
498 (mtvscr): Correct operand list.
499 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
501 2001-10-17 Alan Modra <amodra@bigpond.net.au>
503 * po/POTFILES.in: Regenerate.
505 2001-10-13 matthew green <mrg@redhat.com>
507 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
508 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
509 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
511 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
513 * cgen-ibld.in: Include safe-ctype.h in preference to
515 * cgen-asm.in: Include safe-ctype.h in preference to
516 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
517 TOLOWER instead of tolower.
518 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
519 string elements in constructed regular expression.
520 * fr30-asm.c: Regenerate.
521 * fr30-desc.c: Regenerate.
522 * fr30-ibld.c: Regenerate.
523 * m32r-asm.c: Regenerate.
524 * m32r-desc.c: Regenerate.
525 * m32r-ibld.c: Regenerate.
526 * openrisc-asm.c: Regenerate.
527 * openrisc-desc.c: Regenerate.
528 * openrisc-ibld.c: Regenerate.
529 * po/opcodes.pot: Regenerate.
531 2001-10-12 matthew green <mrg@redhat.com>
533 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
534 instruction field instruction/extraction functions for new BookE
535 DE form instructions.
536 (CT): New macro for CT field in an X form instruction.
537 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
539 (PPC64): Don't include PPC_OPCODE_PPC.
540 (403): New opcode macro for PPC403 processors.
541 (BOOKE): New opcode macro for BookE processors.
542 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
543 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
544 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
545 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
546 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
547 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
548 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
549 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
550 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
551 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
552 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
553 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
554 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
555 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
557 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
558 for a disassembler option of `booke', `booke32' or `booke64' to enable
559 BookE support in the disassembler.
561 2001-10-12 John Healy <jhealy@redhat.com>
563 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
564 for the length when extracting the base part of the insn.
566 2001-10-09 Bruno Haible <haible@clisp.cons.org>
568 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
569 regular expression. Fix some formatting problems.
570 * fr30-asm.c: Regenerate.
571 * openrisc-asm.c: Regenerate.
572 * m32r-asm.c: Regenerate.
574 2001-10-09 Christian Groessler <cpg@aladdin.de>
576 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
577 of indirect register memory accesses to be same format the
580 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
582 * sh-opc.h: Fix encoding of least significant nibble of the
583 DSP single data transfer instructions.
585 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
588 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
590 * cgen-asm.in: Fix compile time warning messages in generated
592 * cgen-dis.in: The same.
593 * cgen-ibld.in: The same.
594 * fr30-asm.c: Regenerate.
595 * fr30-desc.c: Regenerate.
596 * fr30-dis.c: Regenerate.
597 * fr30-ibld.c: Regenerate.
598 * fr30-opc.c: Regenerate.
599 * m32r-asm.c: Regenerate.
600 * m32r-desc.c: Regenerate.
601 * m32r-dis.c: Regenerate.
602 * m32r-ibld.c: Regenerate.
603 * m32r-opc.c: Regenerate.
604 * m32r-opinst.c Regenerate.
605 * openrisc-asm.c: Regenerate.
606 * openrisc-desc.c: Regenerate.
607 * openrisc-dis.c: Regenerate.
608 * openrisc-ibld.c: Regenerate.
609 * openrisc-opc.c: Regenerate.
610 * openrisc-opc.h: Regenerate.
611 * Makefile.in: Regenerate.
612 * po/POTFILES.in: Regenerate.
613 * po/opcodes.pot: Regenerate.
615 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
617 * arm-opc.h (arm_opcodes): Add cirrus insns.
619 * arm-dis.c (print_insn_arm): Add 'I' case.
621 2001-10-03 Alan Modra <amodra@bigpond.net.au>
623 * po/POTFILES.in: Regenerate.
624 * configure: Regenerate.
626 2001-10-02 Alan Modra <amodra@bigpond.net.au>
628 * Makefile.am (Makefile): Depend on bfd/configure.in.
630 * Makefile.in: Regenerate.
632 2001-09-30 John Healy <jhealy@redhat.com>
634 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
635 calls to cgen_get_insn_value and cgen_put_insn_value calls.
636 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
638 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
640 * Makefile.am: Update dependencies with "make dep-am".
641 * Makefile.in: Regenerate.
643 2001-09-26 Alan Modra <amodra@bigpond.net.au>
645 * arc-dis.c: Formatting fixes.
646 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
648 2001-09-21 Bruno Haible <haible@clisp.cons.org>
650 * arc-dis.c: Don't include <ctype.h>.
651 * openrisc-desc.c: Likewise.
652 * openrisc-ibld.c: Likewise.
654 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
656 * fr30-opc.c: Fix compile time warning messages.
657 * i370-opc.c: Fix compile time warning messages.
658 * i960-dis.c: Fix compile time warning messages.
659 * m32r-asm.c: Fix compile time warning messages.
660 * m32r-desc.c: Fix compile time warning messages.
661 * m32r-dis.c: Fix compile time warning messages.
662 * m32r-ibld.c: Fix compile time warning messages.
663 * m32r-opc.c: Fix compile time warning messages.
664 * m32r-opinst.c: Fix compile time warning messages.
665 * ns32k-dis.c: Fix compile time warning messages.
666 * openrisc-asm.c: Fix compile time warning messages.
667 * openrisc-desc.c: Fix compile time warning messages.
668 * openrisc-dis.c: Fix compile time warning messages.
669 * openrisc-ibld.c: Fix compile time warning messages.
670 * openrisc-opc.c: Fix compile time warning messages.
671 * pdp11-dis.c: Fix compile time warning messages.
672 * tic54x-dis.c: Fix compile time warning messages.
673 * v850-opc.c: Fix compile time warning messages.
674 * vax-dis.c: Fix compile time warning messages.
675 * w65-opc.h: Fix compile time warning messages.
676 * z8k-opc.h: Fix compile time warning messages.
677 * z8kgen.c: Fix compile time warning messages.
679 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
681 * arm-dis.c: Fix compile time warning messages.
682 * cgen-asm.c: Fix compile time warning messages.
683 * cgen-dis.c: Fix compile time warning messages.
684 * cris-dis.c: Fix compile time warning messages.
685 * d10v-dis.c: Fix compile time warning messages.
686 * fr30-asm.c: Fix compile time warning messages.
687 * fr30-desc.c: Fix compile time warning messages.
688 * fr30-dis.c: Fix compile time warning messages.
689 * fr30-ibld.c: Fix compile time warning messages.
691 2001-09-18 Bruno Haible <haible@clisp.cons.org>
693 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
694 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
695 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
696 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
698 (cgen_keyword_add): Use ISALNUM instead of isalnum.
699 (hash_keyword_name): Use TOLOWER instead of tolower.
700 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
701 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
703 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
704 * fr30-desc.c: Don't include <ctype.h>.
705 * fr30-ibld.c: Likewise.
706 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
707 (load_insn_classes, parse_resource_users, load_depfile): Use
708 ISSPACE instead of isspace.
709 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
710 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
712 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
713 * m32r-desc.c: Don't include <ctype.h>.
714 * m32r-ibld.c: Likewise.
715 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
716 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
718 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
720 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
722 * Makefile.am: Add rules and dependencies to create the s/390 opcode
723 table out of s390-opc.txt automatically.
724 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
725 * s390-mkopc.c (dumpTable): Change output to create a complete file.
726 * s390-opc.c: New improved opcode format macros and remove the
727 pregenerated opcode table.
728 * s390-opc.txt: Adapt to new improved opcode format macros.
730 2001-09-14 David Schleef <ds@schleef.org>
732 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
734 2001-09-04 Alan Modra <amodra@bigpond.net.au>
736 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
737 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
739 2001-08-31 Eric Christopher <echristo@redhat.com>
740 Jason Eckhardt <jle@redhat.com>
742 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
743 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
746 2001-08-31 Andreas Jaeger <aj@suse.de>
748 * tic54x-opc.c: Add default initializers to avoid warnings.
750 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
751 * arc-ext.c: Likewise.
753 2001-08-28 matthew gren <mrg@redhat.com>
755 * ppc-opc.c (icbt): Order correctly.
757 2001-08-27 David Edelsohn <dje@watson.ibm.com>
758 Torbjorn Granlund <tege@swox.com>
760 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
762 (insert_ds): Complain if not a multiple of 4.
764 (XSYNC_MASK): Define.
765 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
766 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
768 2001-08-26 Andreas Jaeger <aj@suse.de>
770 * h8500-opc.h: Add default initializers to h8500_table to shut up
773 2001-08-25 Andreas Jaeger <aj@suse.de>
775 * tic54x-dis.c: Add unused attributes where needed.
777 * z8k-dis.c (output_instr): Add unused attribute.
779 * h8300-dis.c: Add missing prototypes.
780 (bfd_h8_disassemble): Make static.
782 * cris-dis.c: Add missing prototype.
783 * h8500-dis.c: Likewise.
784 * m68hc11-dis.c: Likewise.
785 * pj-dis.c: Likewise.
786 * tic54x-dis.c: Likewise.
787 * v850-dis.c: Likewise.
788 * vax-dis.c: Likewise.
789 * w65-dis.c: Likewise.
790 * z8k-dis.c: Likewise.
792 * d10v-dis.c: Add missing prototype.
793 (dis_long): Remove unused variable.
794 (dis_2_short): Likewise.
796 * sh-dis.c: Add missing prototypes.
797 * v850-opc.c: Likewise.
798 Add unused attributes where needed.
800 * ns32k-dis.c: Add missing prototypes.
801 (bit_extract_simple): Remove unused variable.
803 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
805 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
806 branch instructions for gcc 3.0.
807 * opcodes/s390-opc.txt: Likewise.
809 2001-08-21 Andreas Jaeger <aj@suse.de>
811 * i960-dis.c: Add parameters for prototypes
812 (ctrl): Add unused attributes.
816 * mips-dis.c: Add missing prototypes.
817 * a29k-dis.c: Likewise.
818 * arc-dis.c: Likewise.
819 * ia64-opc.c: Likewise.
821 * s390-dis.c: Add missing prototypes.
822 (init_disasm): Remove unused attribute since the parameter is
825 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
827 * mips-opc.c (M1): Define. Reformatted Code.
828 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
831 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
833 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
834 the corresponding non-likely insn is in MIPS I.
836 2001-08-13 Kazu Hirata <kazu@hxi.com>
838 * mcore-dis.c: Fix formatting.
839 * mips-dis.c: Likewise.
840 * pj-dis.c: Likewise.
841 * z8k-dis.c: Likewise.
843 2001-08-12 Richard Henderson <rth@redhat.com>
845 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
846 to *VALUEP. Regenerate all cgen files.
848 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
850 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
852 * mips-opc.c (G6): Undefine.
853 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
854 as the first "move" alternative.
856 2001-08-10 Andreas Jaeger <aj@suse.de>
858 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
860 * configure: Regenerate.
862 2001-08-10 Alan Modra <amodra@bigpond.net.au>
864 * ppc-opc.c: Revert 2001-08-08.
866 2001-08-09 Alan Modra <amodra@bigpond.net.au>
868 * dis-buf.c (generic_strcat_address): Add missing prototype.
869 #if 0 the functions as it is unused.
871 2001-08-08 Alan Modra <amodra@bigpond.net.au>
873 1999-10-25 Torbjorn Granlund <tege@swox.com>
874 * ppc-opc.c: Include "bfd.h".
875 (powerpc_operands): Add new field for reloc type.
877 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
879 * mips-dis.c (print_insn_arg): Don't use software integer registers
880 for coprocessor registers.
881 (get_mips_isa): Removed.
882 (is_newabi): New function, checks if NewABI is used.
883 (_print_insn_mips): Get distinction between old ABI and new ABI right.
885 2001-08-01 Christian Groessler <cpg@aladdin.de>
887 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
888 get stderr definition.
889 (internal, gas): Removed warnings.
890 (gas): Create a correct final entry for created array.
891 * z8k-opc.h: Recreated with new z8kgen.
893 2001-07-28 Kazu Hirata <kazu@hxi.com>
895 * i386-dis.c: Fix formatting.
897 2001-07-28 Matthias Kramm <kramm@quiss.org>
899 * i386-dis.c: Change formatting conventions for architecture
900 i386:intel to better match the format of various intel i386
901 assemblers, like nasm, tasm or masm.
903 2001-07-24 Alan Modra <amodra@bigpond.net.au>
905 * Makefile.am: Update dependencies with "make dep-am".
906 * Makefile.in: Regenerate
908 2001-07-24 Kazu Hirata <kazu@hxi.com>
910 * alpha-dis.c: Fix formatting.
911 * cris-dis.c: Likewise.
912 * d10v-dis.c: Likewise.
913 * d30v-dis.c: Likewise.
914 * m10300-dis.c: Likewise.
915 * tic54x-dis.c: Likewise.
917 2001-07-23 Kazu Hirata <kazu@hxi.com>
919 * m68k-dis.c: Fix formatting.
920 * pj-dis.c: Likewise.
921 * s390-dis.c: Likewise.
922 * z8k-dis.c: Likewise.
924 2001-07-21 Chris Demetriou <cgd@broadcom.com>
926 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
927 into the rest of the surrounding definitions.
929 2001-07-18 Alan Modra <amodra@bigpond.net.au>
931 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
932 for lgdt, lidt, sgdt, sidt.
934 2001-07-13 Philip Blundell <philb@gnu.org>
936 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
938 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
940 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
942 (@arch@_cgen_build_insn_regex): New routine from Graydon.
943 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
944 to verify if it is worth parsing the insn as insn "x". Also update
945 error message when insn is not a recognized format of the insn vs
946 when the insn is completely unrecognized.
948 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
950 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
952 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
953 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
955 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
957 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
958 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
959 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
961 2001-07-05 Ben Elliston <bje@redhat.com>
963 * Makefile.am (CPUDIR): Define.
964 (stamp-m32r): Update dependencies.
966 (stamp-openrisc): Ditto.
967 * Makefile.in: Regenerate.
969 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
971 * ppc-opc.c: Fix encoding of 'clf' instruction.
973 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
975 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
977 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
979 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
980 * cgen-opc.c (cgen_keyword_add): Ignore special first
981 character when building nonalpha_chars field.
983 2001-06-24 Ben Elliston <bje@redhat.com>
985 * m88k-dis.c: Format to conform to GNU coding standards.
987 2001-06-23 Andreas Jaeger <aj@suse.de>
989 * disassemble.c (disassembler_usage): Add unused attribute.
991 2001-06-22 Eric Christopher <echristo@redhat.com>
993 * mips-opc.c: Move prefx to start of the table.
995 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
997 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1000 2001-06-22 Pauli <pauli@moreton.com.au>
1002 * m68k-opc.c: Add wdebug instruction.
1004 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1006 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1008 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1010 * cgen-asm.c (cgen_parse_keyword): When looking for the
1011 boundaries of a keyword, allow any special characters
1012 that are actually in one of the allowed keyword.
1013 * cgen-opc.c (cgen_keyword_add): Add any special characters
1014 to the nonalpha_chars field.
1016 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1018 * s390-opc.c: Add lgh instruction.
1019 * s390-opc.txt: Likewise.
1021 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1023 * i386-dis.c: Group function prototypes in one place.
1024 (FLOATCODE): Redefine as 1.
1025 (USE_GROUPS): Redefine as 2.
1026 (USE_PREFIX_USER_TABLE): Redefine as 3.
1027 (X86_64_SPECIAL): Define as 4.
1028 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1029 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1030 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1031 (dis386): New table combining above four tables.
1032 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1033 (dis386_twobyte): New table combining above two tables.
1034 (x86_64_table): New table to handle x86_64.
1036 (float_mem_att, float_mem_intel): Delet.
1037 (float_mem): New table combining above two tables.
1038 (print_insn_i386): Modify for above.
1039 (dofloat): Likewise.
1040 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1041 Return 0 on success, 1 if no valid alternative.
1042 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1043 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1044 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1045 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1047 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1048 (OP_I64): If not 64-bit mode, call OP_I.
1049 OP_OFF64): If not 64-bit mode, call OP_OFF.
1050 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1051 'ignore'/'ignored' to 'bytemode'.
1053 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1055 * configure.in: Sort 'ta' case statement.
1056 * configure: Regenerate.
1058 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1060 (disx86_64_att): Likewise.
1061 (dis386_twobyte_att): Likewise.
1062 (print_insn_i386): Don't print branch hints as a prefix.
1063 (putop): 'H' macro prints branch hints.
1064 (get64): Kill compile warnings.
1066 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1068 * sh-opc.h (sh_table): Don't use empty initializers.
1070 2001-06-06 Christian Groessler <cpg@aladdin.de>
1072 * z8k-dis.c: Fix formatting.
1073 (unpack_instr): Remove unused cases in switch statement. Add
1074 safety abort() in default case.
1075 (unparse_instr): Add safety abort() in default case.
1077 2001-06-06 Peter Jakubek <pjak@snafu.de>
1079 * m68k-dis.c (print_insn_m68k): Fix typo.
1080 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1081 mcf (ColdFire) div, rem and moveb instructions.
1083 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1085 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1086 (cond_jump_mode, loop_jcxz_mode): Define.
1087 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1088 appropriate, and 'F' suffix to loop insns.
1089 (disx86_64_att): Likewise.
1090 (dis386_twobyte_att): Likewise.
1091 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1092 Output data size prefix for long conditional jumps. Output cs and
1094 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1095 (OP_J): Don't make PREFIX_DATA used.
1097 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1099 * sh-opc.h (sh_table): Complete last element entry to avoid
1102 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1104 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1106 2001-05-23 Alan Modra <amodra@one.net.au>
1108 * arc-opc.c: Whitespace changes.
1110 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1112 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1115 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1117 * cgen-dis.in (extract_normal): Complete support for min<base case.
1119 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1121 * mips-dis.c (INSNLEN): Rename MAXLEN.
1122 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1123 (print_insn_arg): Remove $ prefix of register names.
1124 (set_mips_isa_type): Remove.
1125 (mips_isa_type): New function.
1126 (get_mips_isa): New Function.
1127 (print_insn_mips): Rename _print_insn_mips.
1128 (_print_insn_mips): New function, contains code which was
1129 duplicated in print_insn_big_mips and print_insn_little_mips.
1130 (print_insn_big_mips): Moved code to _print_insn_mips.
1131 (print_insn_little_mips): Likewise.
1132 (print_mips16_insn_arg): Remove $ prefix of register names.
1133 Print error message before abort.
1135 2001-05-14 J.T. Conklin <jtc@redback.com>
1137 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1138 simplified mnemonics used for setting PPC750-specific special
1141 2001-05-12 H.J. Lu <hjl@gnu.org>
1143 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1146 2001-05-12 Peter Targett <peter.targett@arccores.com>
1148 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1149 register to r/w. Formatting fixes throughout file.
1151 2001-05-12 Alan Modra <amodra@one.net.au>
1153 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1155 (twobyte_has_modrm): Update table.
1156 (need_modrm): Give it file scope.
1157 (MODRM_CHECK): Define.
1158 (dofloat): Use MODRM_CHECK.
1163 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1165 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1166 even at end of a section.
1167 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1168 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1170 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1172 * disassemble.c (disassembler_usage): Remove unused attribute.
1174 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1176 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1178 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1180 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1181 assume incoming buffer already has the base insn loaded. Handle
1182 smaller-than-base instructions for variable-length case.
1184 2001-05-04 Alan Modra <amodra@one.net.au>
1186 * i386-dis.c (Ev, Ed): Remove duplicate define.
1189 (OP_XS): New function.
1190 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1192 (dis386_twobyte_intel): Likewise.
1193 (prefix_user_table): Use MS for maskmovq operand.
1195 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1197 * Makefile.am: Add OpenRISC target.
1198 * Makefile.in: Regenerated.
1200 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1202 * configure.in (bfd_openrisc_arch): Add target.
1203 * configure: Regenerated.
1205 * openrisc-asm.c: New file.
1206 * openrisc-desc.c: Likewise.
1207 * openrisc-desc.h: Likewise.
1208 * openrisc-dis.c: Likewise.
1209 * openrisc-ibld.c: Likewise.
1210 * openrisc-opc.c: Likewise.
1211 * openrisc-opc.h: Likewise.
1213 2001-04-24 Christian Groessler <cpg@aladdin.de>
1215 * z8k-dis.c: add names of control registers (ctrl_names);
1216 (seg_length): provides instruction length fixup for segmented
1217 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1218 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1219 (unparse_intr): handle CLASS_PR, print addresses without '#'
1220 * z8k-opc.h: re-created with new z8kgen
1221 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1222 entries for ldctl/ldctlb instruction
1224 2001-04-06 Andreas Jaeger <aj@suse.de>
1226 * i386-dis.c: Add ffreep instruction.
1228 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1230 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1232 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1234 * i386-dis.c (PREGRP25): Define.
1235 (dis386_twobyte_att): Use here in place of "movntq" entry.
1236 (dis386_twobyte_intel): Likewise.
1237 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1239 (dis386_twobyte_att): Use here.
1240 (dis386_twobyte_intel): Likewise.
1241 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1242 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1243 (prefix_user_table): Cosmetic changes to "bad" entries.
1245 2001-03-23 Nick Clifton <nickc@redhat.com>
1247 * mips-opc.c: Remove extraneous whitespace.
1248 * mips-dis.c: Remove extraneous whitespace.
1250 2001-03-22 Ben Elliston <bje@redhat.com>
1252 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1253 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1254 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1255 to allay a compiler warning.
1257 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1259 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1260 (dis386_twobyte_intel): Likewise.
1261 (twobyte_has_modrm): Set entry for paddq, psubq.
1263 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1265 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1266 determination via CGEN_COMPUTE_MACH.
1267 * fr30-desc.c: Regenerate.
1268 * fr30-dis.c: Regenerate.
1269 * fr30-opc.h: Regenerate.
1270 * m32r-desc.c: Regenerate.
1271 * m32r-dis.c: Regenerate.
1272 * m32r-opc.h: Regenerate.
1273 * m32r-opinst.c: Regenerate.
1275 2001-03-20 H.J. Lu <hjl@gnu.org>
1277 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1278 * configure: Rebuild.
1280 2001-03-19 Jim Wilson <wilson@redhat.com>
1282 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1283 notestr if larger than xsect.
1284 (in_class): Handle format M5.
1285 * ia64-asmtab.c: Regnerate.
1287 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1289 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1290 has more than one byte left to read.
1292 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1294 * s390-opc.c: Add new opcodes. Smooth out formatting.
1295 * s390-opc.txt: Add new opcodes.
1297 2001-03-06 Nick Clifton <nickc@redhat.com>
1299 * arm-dis.c (print_insn_thumb): Compute destination address
1300 of BLX(1) instruction by taking bit 1 from PC and not from bit
1303 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1305 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1306 so command line switches will work.
1308 2001-03-05 Dave Brolley <brolley@redhat.com>
1310 * fr30-asm.c: Regenerate.
1311 * fr30-desc.c: Regenerate.
1312 * fr30-desc.h: Regenerate.
1313 * fr30-dis.c: Regenerate.
1314 * fr30-ibld.c: Regenerate.
1315 * fr30-opc.c: Regenerate.
1316 * fr30-opc.h: Regenerate.
1317 * m32r-asm.c: Regenerate.
1318 * m32r-desc.c: Regenerate.
1319 * m32r-desc.h: Regenerate.
1320 * m32r-dis.c: Regenerate.
1321 * m32r-ibld.c: Regenerate.
1322 * m32r-opc.c: Regenerate.
1323 * m32r-opc.h: Regenerate.
1324 * m32r-opinst.c: Regenerate.
1326 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1328 * m68k-opc.c: fix cpushl according to Motorola. Enable
1329 bunch of instructions for Coldfire 5407 and add all new.
1331 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1333 * configure.in (BFD_VERSION): Do without grep.
1334 * configure: Regenerate.
1335 * Makefile.am: Run "make dep-am".
1336 * Makefile.in: Regenerate.
1338 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1340 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1341 * ia64-asmtab.c: Regenerate.
1343 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1345 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1346 separate variants: one for IMM22 and the other for IMM14.
1347 * ia64-asmtab.c: Regenerate.
1349 2001-02-21 Greg McGary <greg@mcgary.org>
1351 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1353 2001-02-20 H.J. Lu <hjl@gnu.org>
1355 * Makefile.am (ia64-ic.tbl): Remove the target.
1356 (ia64-raw.tbl): Likewise.
1357 (ia64-waw.tbl): Likewise.
1358 (ia64-war.tbl): Likewise.
1359 (ia64-asmtab.c): Generate it in the source directory.
1360 * Makefile.in: Regenerated.
1362 2001-02-18 lars brinkhoff <lars@nocrew.org>
1364 * Makefile.am: Add PDP-11 target.
1365 * configure.in: Likewise.
1366 * disassemble.c: Likewise.
1367 * pdp11-dis.c: New file.
1368 * pdp11-opc.c: New file.
1370 2001-02-14 Jim Wilson <wilson@redhat.com>
1372 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1373 * ia64-asmtab.c: Regenerate.
1375 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1377 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1381 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1383 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1384 the following instruction not of the jump itself for the jump
1386 (print_mips16_insn_arg): Likewise.
1388 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1390 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1392 * Makefile.in: Regenerate.
1394 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1396 * Makefile.am: Add linux target for S/390.
1397 * Makefile.in: Likewise.
1398 * configure.in: Likewise.
1399 * disassemble.c: Likewise.
1400 * s390-dis.c: New file.
1401 * s390-mkopc.c: New file.
1402 * s390-opc.c: New file.
1403 * s390-opc.txt: New file.
1405 2001-02-05 Jim Wilson <wilson@redhat.com>
1407 * ia64-asmtab.c: Revert 2000-12-16 change.
1409 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1411 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1412 * m32r-desc.h: Regenerate.
1414 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1416 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1417 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1419 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1421 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1423 2001-01-13 Nick Clifton <nickc@redhat.com>
1425 * disassemble.c: Remove spurious white space.
1427 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1429 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1432 2001-01-11 Peter Targett <peter.targett@arccores.com>
1434 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1435 * Makefile.am (C_FILES): Add arc-ext.c.
1436 (ALL_MACHINES) Add arc-ext.lo.
1437 (INCLUDES) Add opcode directory to list.
1438 New dependency entry for arc-ext.lo.
1439 * disassemble.c (disassembler): Correct call to
1440 arc_get_disassembler.
1441 * arc-opc.c: New update for ARC, including full base
1442 instructions for ARC variants.
1443 * arc-dis.h, arc-dis.c: New update for ARC, including
1444 extensibility functionality.
1445 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1447 2001-01-10 Jan Hubicka <jh@suse.cz>
1449 * i386-dis.c (PREGRP15 - PREGRP24): New.
1450 (dis386_twobyt): Add SSE2 instructions.
1451 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1452 (twobyte_uses_f3_prefix): ... this one.
1453 (grps): Add SSE instructions.
1454 (prefix_user_table): Add two new slots; add SSE2 instructions.
1455 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1456 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1457 to prefix_user_table.
1458 (OP_E): Accept mfence and lfence as well.
1459 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1460 (OP_XMM): Support REX extensions.
1464 2001-01-09 Nick Clifton <nickc@redhat.com>
1466 * arm-dis.c (print_insn): Set pc to zero for instructions with
1467 a reloc associated with them.
1469 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1471 * cgen-asm.in (parse_insn_normal): Changed syn to be
1472 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1473 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1474 to '\0' to use 0 instead.
1475 * cgen-dis.in (print_insn_normal): Ditto.
1476 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1478 2001-01-05 Jan Hubicka <jh@suse.cz>
1480 * i386-dis.c: Add x86_64 support.
1481 (rex): New static variable.
1482 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1483 (USED_REX): New macro.
1484 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1485 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1486 (OP_REG, OP_OFF): Declare.
1487 (get64, get32, get32s): New functions.
1488 (r??_reg): New constants.
1489 (dis386_att): Change templates of instruction implicitly promoted
1490 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1492 (dis386_intel): Likewise.
1493 (dixx86_64_att): New table based on dis386_att.
1494 (dixx86_64_intel): New table based on dis386_intel.
1495 (names64, names8rex): New global variable.
1496 (names32, names16): Add extended registers.
1497 (prefix_user_t): Recognize rex prefixes.
1498 (prefix_name): Print REX prefixes nicely.
1499 (op_riprel): New global variable.
1500 (start_pc): Set type to bfd_vma.
1501 (print_insn_i386): Detect the 64bit mode and use proper table;
1502 move ckprefix after initializing the buffer; output unused rex prefixes;
1503 output information about target of RIP relative addresses.
1504 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1505 (print_operand_value): New function.
1506 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1507 REX prefix and new modes.
1508 (get64, get32s): New.
1509 (get32): Return bfd_signed_vma type.
1510 (set_op): Initialize the op_riprel.
1511 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1513 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1515 cgen-dis.in (read_insn): Use bfd_get_bits()
1517 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1519 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1520 (hash_insn_list): Likewise
1521 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1522 (extract_1): Use bfd_get_bits().
1523 (extract_normal): Apply sign extension to both extraction
1525 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1526 (cgen_put_insn_value): Use bfd_put_bits()
1528 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1530 * cgen-asm.in (parse_insn_normal): Print better error message for
1531 instructions with missing operands.
1533 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1535 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1537 2000-12-16 Nick Clifton <nickc@redhat.com>
1539 * Makefile.in: Regenerate.
1540 * aclocal.m4: Regenerate.
1541 * config.in: Regenerate.
1542 * configure.in: Add spacing.
1543 * configure: Regenerate.
1544 * ia64-asmtab.c: Regenerate.
1545 * po/opcodes.pot: Regenerate.
1547 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1549 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1550 error messages over later parse-time ones.
1552 2000-12-12 Jim Wilson <wilson@redhat.com>
1554 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1556 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1557 (print_dependency_table): Print NULL if semantics field not set.
1558 (insert_opcode_dependencies): Mark cmp parameter as unused.
1559 (print_main_table): Use fprintf_vma to print long long fields.
1560 (main): Mark argv paramter as unused. Convert to old style definition.
1561 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1562 * ia64-asmtab.c: Regnerate.
1564 2000-12-09 Nick Clifton <nickc@redhat.com>
1566 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1569 * fr30-dis.c: Regenerate.
1571 2000-12-08 Peter Targett <peter.targett@arccores.com>
1573 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1574 * Makefile.am (C_FILES): Add arc-ext.c.
1575 (ALL_MACHINES) Add arc-ext.lo.
1576 (INCLUDES) Add opcode directory to list.
1577 New dependency entry for arc-ext.lo.
1578 * disassemble.c (disassembler): Correct call to
1579 arc_get_disassembler.
1580 * arc-opc.c: New update for ARC, including full base
1581 instructions for ARC variants.
1582 * arc-dis.h, arc-dis.c: New update for ARC, including
1583 extensibility functionality.
1584 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1586 2000-12-03 Chris Demetriou cgd@sibyte.com
1588 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1589 MOD_HILO, and MOD_LO macros.
1591 * mips-opc.c (M1, M2): Delete.
1592 (mips_builtin_opcodes): Remove all uses of M1.
1594 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1595 instructions take "G" format second operands and use the
1597 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1599 Delete "sel" code operands from mfc1 and mtc1.
1600 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1603 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1604 Chris Demetriou cgd@sibyte.com
1606 * mips-opc.c (mips_builtin_opcodes): Finish additions
1607 for MIPS32 support, and clean up existing entries for
1608 aesthetics, consistency with the MIPS32 ISA, and
1609 with consistency the rest of the table.
1611 2000-12-01 Nick Clifton <nickc@redhat.com>
1613 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1616 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1618 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1619 specifiers. Update 'B' for new constant names, and remove
1621 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1622 near the top of the array, so they are disassembled properly.
1623 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1624 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1625 specifier. Add 'H' format specifier variants for "mfc1,"
1626 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1627 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1628 "wait" variant which uses 'J' operand specifier.
1630 * mips-dis.c (set_mips_isa_type): Update to use
1631 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1632 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1633 * mips-opc.c (I32): New constant for instructions added in
1636 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1638 * mips-dis.c (set_mips_isa_type): Add cases for
1639 bfd_mach_mips5 and bfd_mach_mips64.
1640 * mips-opc.c (I64): New definitions.
1642 * mips-dis.c (set_mips_isa_type): Add case for
1645 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1647 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1648 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1649 Initialize variable dc to NULL.
1650 (print_insn_shx): Remove unused label d_reg_n.
1652 2000-11-24 Nick Clifton <nickc@redhat.com>
1654 * arm-opc.h: Add new opcode formatting parameter 'B'.
1655 (arm_opcodes): Add XScale, v5, and v5te instructions.
1656 (thumb_opcodes): Add v5t instructions.
1658 * arm-dis.c (print_insn_arm): Handle new 'B' format
1660 (print_insn_thumb): Decode BLX(1) instruction.
1662 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1664 * mips-opc.c: Fix file header comment.
1666 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1668 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1669 print_insn_cris_with_register_prefix.
1671 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1673 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1675 2000-11-07 Matthew Green <mrg@redhat.com>
1677 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1678 must be loaded there in their entirety.
1680 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1682 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1683 (compute_arch_mask): Add v8plusb and v9b machines.
1684 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1685 * sparc-opc.c: Support for Cheetah instruction set.
1686 (prefetch_table): Add #invalidate.
1688 2000-10-16 Nick Clifton <nickc@redhat.com>
1690 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1692 2000-10-06 Dave Brolley <brolley@redhat.com>
1694 * fr30-desc.h: Regenerate.
1695 * m32r-desc.h: Regenerate.
1696 * m32r-ibld.c: Regenerate.
1698 2000-10-05 Jim Wilson <wilson@redhat.com>
1700 * ia64-ic.tbl: Update from Intel.
1701 * ia64-asmtab.c: Regenerate.
1703 2000-10-04 Kazu Hirata <kazu@hxi.com>
1705 * ia64-gen.c: Convert C++-style comments to C-style comments.
1706 * tic54x-dis.c: Likewise.
1708 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1710 Changes to add dollar prefix to registers for files where user symbols
1711 don't have a leading underscore. Fix formatting.
1712 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1713 (format_reg): Add parameter with_reg_prefix. All callers changed.
1714 (print_with_operands): Ditto.
1715 (print_insn_cris_generic): Renamed from print_insn_cris, add
1716 parameter with_reg_prefix.
1717 (print_insn_cris_with_register_prefix,
1718 print_insn_cris_without_register_prefix, cris_get_disassembler):
1720 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1722 2000-09-22 Jim Wilson <wilson@redhat.com>
1724 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1725 gt, ge, ngt, and nge.
1726 * ia64-asmtab.c: Regenerate.
1728 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1729 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1730 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1731 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1732 * ia64-asmtab.c: Regnerate.
1734 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1736 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1737 Add mfc0 and mtc0 with sub-selection values.
1738 Add clo and clz opcodes.
1739 Add msub and msubu instructions for MIPS32.
1740 Add madd/maddu aliases for mad/madu for MIPS32.
1741 Support wait, deret, eret, movn, pref for MIPS32.
1742 Support tlbp, tlbr, tlbwi, tlbwr.
1745 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1746 (print_insn_arg): Handle 'H' args.
1747 (set_mips_isa_type): Recognize 4K.
1748 Use CPU_* defines instead of hardcoded numbers.
1750 2000-09-11 Catherine Moore <clm@redhat.com>
1752 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1753 (d30v_format_tab): Use Rb2 for modinc and moddec.
1755 2000-09-07 Catherine Moore <clm@redhat.com>
1757 * d30v-opc.c (d30v_format_tab): Use format Ra for
1760 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1762 * configure: Rebuilt with new libtool.m4.
1764 2000-09-05 Nick Clifton <nickc@redhat.com>
1766 * configure: Regenerate.
1767 * po/opcodes.pot: Regenerate.
1769 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1771 * acinclude.m4: Include libtool and gettext macros from the
1773 * aclocal.m4, configure: Rebuilt.
1775 2000-08-30 Kazu Hirata <kazu@hxi.com>
1777 * tic80-dis.c: Fix formatting.
1779 2000-08-29 Kazu Hirata <kazu@hxi.com>
1781 * w65-dis.c: Fix formatting.
1783 2000-08-28 Mark Hatle <mhatle@mvista.com>
1785 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1786 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1787 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1788 instructions. Added extended mnemonic mftbl as defined in the
1789 405GP manual for all PPCs.
1791 2000-08-28 Jim Wilson <wilson@redhat.com>
1793 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1794 call. Change last goto to use failed instead of done.
1796 2000-08-28 Dave Brolley <brolley@redhat.com>
1798 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1799 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1800 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1801 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1802 * cgen-dis.in (read_insn): New static function.
1803 (print_insn): Use read_insn to read the insn into the buffer and set
1805 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1807 * fr30-asm.c: Regenerated.
1808 * fr30-desc.c: Regenerated.
1809 * fr30-desc.h: Regenerated.
1810 * fr30-dis.c: Regenerated.
1811 * fr30-ibld.c: Regenerated.
1812 * fr30-opc.c: Regenerated.
1813 * fr30-opc.h: Regenerated.
1814 * m32r-asm.c: Regenerated.
1815 * m32r-desc.c: Regenerated.
1816 * m32r-desc.h: Regenerated.
1817 * m32r-dis.c: Regenerated.
1818 * m32r-ibld.c: Regenerated.
1819 * m32r-opc.c: Regenerated.
1821 2000-08-28 Kazu Hirata <kazu@hxi.com>
1823 * tic30-dis.c: Fix formatting.
1825 2000-08-27 Kazu Hirata <kazu@hxi.com>
1827 * sh-dis.c: Fix formatting.
1829 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1831 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1833 2000-08-24 Kazu Hirata <kazu@hxi.com>
1835 * z8k-dis.c: Fix formatting.
1837 2000-08-16 Jim Wilson <wilson@redhat.com>
1839 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1840 break, mov-immediate, nop.
1841 * ia64-opc-f.c: Delete fpsub instructions.
1842 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1843 address operand. Rewrite using macros to avoid long lines.
1844 * ia64-opc.h (POSTINC): Define.
1845 * ia64-asmtab.c: Regenerate.
1847 2000-08-15 Jim Wilson <wilson@redhat.com>
1849 * ia64-ic.tbl: Add missing entries.
1851 2000-08-08 Jason Eckhardt <jle@redhat.com>
1853 * i860-dis.c (print_br_address): Change third argument from int
1856 2000-08-07 Richard Henderson <rth@redhat.com>
1858 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1859 for MLI templates. Handle IA64_OPND_TGT64.
1861 2000-08-04 Ben Elliston <bje@redhat.com>
1863 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1864 * cgen.sh: Likewise.
1866 2000-08-02 Jim Wilson <wilson@redhat.com>
1868 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1870 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1872 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1873 Change return type from void to int. Check the combination
1874 of operands, return 1 if valid. Fix to avoid BUF overflow.
1875 Report undefined combinations of operands in COMMENT.
1876 Report internal errors to stderr. Output the adiw/sbiw
1877 constant operand in both decimal and hex.
1878 (print_insn_avr): Disassemble ldd/std with displacement of 0
1879 as ld/st. Check avr_operand () return value, handle invalid
1880 combinations of operands like unknown opcodes.
1882 2000-07-28 Ben Elliston <bje@redhat.com>
1884 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1885 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1886 * Makefile.in: Regenerate.
1887 * configure.in: Add --enable-cgen-maint option.
1888 * configure: Regenerate.
1890 2000-07-26 Dave Brolley <brolley@redhat.com>
1892 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1893 (cgen_hw_lookup_by_num): Ditto.
1894 (cgen_operand_lookup_by_name): Ditto.
1895 (print_address): Ditto.
1896 (print_keyword): Ditto.
1897 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1899 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1901 (cgen_parse_keyword): Ditto.
1903 2000-07-22 Jason Eckhardt <jle@redhat.com>
1905 * i860-dis.c: New file.
1906 (print_insn_i860): New function.
1907 (print_br_address): New function.
1908 (sign_extend): New function.
1909 (BITWISE_OP): New macro.
1910 (I860_REG_PREFIX): New macro.
1911 (grnames, frnames, crnames): New structures.
1913 * disassemble.c (ARCH_i860): Define.
1914 (disassembler): Add check for bfd_arch_i860 to set disassemble
1915 function to print_insn_i860.
1917 * Makefile.in (CFILES): Added i860-dis.c.
1918 (ALL_MACHINES): Added i860-dis.lo.
1919 (i860-dis.lo): New dependences.
1921 * configure.in: New bits for bfd_i860_arch.
1923 * configure: Regenerated.
1925 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1927 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1928 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1929 (cris-dis.lo, cris-opc.lo): New rules.
1930 * Makefile.in: Rebuild.
1931 * configure.in (bfd_cris_arch): New target.
1932 * configure: Rebuild.
1933 * disassemble.c (ARCH_cris): Define.
1934 (disassembler): Support ARCH_cris.
1935 * cris-dis.c, cris-opc.c: New files.
1936 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1938 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1940 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1941 Reported by Bill Clarke <llib@computer.org>.
1943 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1945 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1946 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1948 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1950 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1951 fput_const, extract_3, extract_5_load, extract_5_store,
1952 extract_5r_store, extract_5R_store, extract_10U_store,
1953 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1954 extract_12, extract_17, extract_22): Prototype.
1955 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1956 shadowing outer block.
1959 2000-07-05 DJ Delorie <dj@redhat.com>
1963 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1965 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1967 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1969 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1970 marked for translation (exception from the usual coding style).
1971 (print_insn_avr): Initialize insn2 to avoid warnings.
1973 2000-07-03 Kazu Hirata <kazu@hxi.com>
1975 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1976 * h8500-dis.c: Fix formatting.
1978 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1980 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1981 (CLEANFILES): Add DEPA.
1982 * Makefile.in: Regenerate.
1984 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1986 * arm-dis.c (regnames): Add an additional register set to match
1987 the set used by GCC. Make it the default.
1989 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1991 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1993 * Makefile.in: Regenerate.
1995 2000-06-20 H.J. Lu <hjl@gnu.org>
1997 * Makefile.am: Rebuild dependency.
1998 * Makefile.in: Rebuild.
2000 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2002 * Makefile.in, configure: regenerate
2003 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2005 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2007 * configure.in: Recognize m68hc12 and m68hc11.
2008 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2009 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2010 and opcode generation for m68hc11 and m68hc12.
2012 2000-06-16 Nick Duffek <nsd@redhat.com>
2014 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2015 bfd_mach_ppc_620 instead of 620.
2017 2000-06-12 Kazu Hirata <kazu@hxi.com>
2019 * h8300-dis.c: Fix formatting.
2020 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2023 2000-06-09 Denis Chertykov <denisc@overta.ru>
2025 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2027 2000-06-07 Denis Chertykov <denisc@overta.ru>
2029 * avr-dis.c: completely rewritten.
2031 2000-06-02 Kazu Hirata <kazu@hxi.com>
2033 * h8300-dis.c: Follow the GNU coding style.
2034 (bfd_h8_disassemble) Fix a typo.
2036 2000-06-01 Kazu Hirata <kazu@hxi.com>
2038 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2039 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2040 correctly. Fix a typo.
2042 2000-05-31 Nick Clifton <nickc@redhat.com>
2044 * opintl.h (_(String)): Explain why dgettext is used instead of
2047 2000-05-30 Nick Clifton <nickc@redhat.com>
2049 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2050 bindtextdomain): Replace defines with those from intl/libgettext.h
2051 to quieten gcc warnings.
2053 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2055 * Makefile.am: Update dependencies with "make dep-am"
2056 * Makefile.in: Regenerate.
2058 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2060 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2061 sign-extending operands.
2063 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2065 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2068 2000-05-21 Nick Clifton <nickc@redhat.com>
2070 * Makefile.am (LIBIBERTY): Define.
2072 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2074 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2075 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2076 (reg_names): Rename to std_reg_names. Change it to a char **
2078 (std_reg_names): New name for reg_names.
2079 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2082 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2084 * fr30-desc.h: Partially regenerated to account for changed
2085 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2086 * m32r-desc.h: Ditto.
2088 2000-05-15 Nick Clifton <nickc@redhat.com>
2090 * arm-opc.h: Use upper case for flasg in MSR and MRS
2091 instructions. Allow any bit to be set in the field_mask of
2092 the MSR instruction.
2094 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2095 field_mask of an MSR instruction.
2097 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2099 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2100 instructions changed to ldrsb/ldrsh.
2102 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2104 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2105 target addresses for 'jal' and 'j'.
2107 2000-05-10 Geoff Keating <geoffk@redhat.com>
2109 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2110 also available in common mode when powerpc syntax is being used.
2112 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2114 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2115 (dummy_print_address): Ditto.
2117 2000-05-04 Timothy Wall <twall@redhat.com>
2119 * tic54x-opc.c: New.
2120 * tic54x-dis.c: New.
2121 * disassemble.c (disassembler): Add ARCH_tic54x.
2122 * configure.in: Added tic54x target.
2124 * Makefile.am: Add tic54x dependencies.
2125 * Makefile.in: Ditto.
2127 2000-05-03 J.T. Conklin <jtc@redback.com>
2129 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2130 vector unit operands.
2131 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2132 unit instruction formats.
2133 (PPCVEC): New macro, mask for vector instructions.
2134 (powerpc_operands): Add table entries for above operand types.
2135 (powerpc_opcodes): Add table entries for vector instructions.
2137 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2138 (print_insn_little_powerpc): Likewise.
2139 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2141 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2143 * configure.in: Add bfd_powerpc_64_arch.
2144 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2147 2000-04-24 Nick Clifton <nickc@redhat.com>
2149 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2152 2000-04-23 Denis Chertykov <denisc@overta.ru>
2154 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2156 (reg_fmul_r): New. Extract source register from FMUL instruction.
2157 (reg_muls_d): New. Extract destination register from MULS instruction.
2158 (reg_muls_r): New. Extract source register from MULS instruction.
2159 (reg_movw_d): New. Extract destination register from MOVW instruction.
2160 (reg_movw_r): New. Extract source register from MOVW instruction.
2161 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2162 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2164 2000-04-22 Timothy Wall <twall@redhat.com>
2166 * ia64-gen.c (general): Add an ordered table of primary
2167 opcode names, as well as priority fields to disassembly data
2168 structures to enforce a preferred disassembly format based on the
2169 ordering of the opcode tables.
2170 (load_insn_classes): Show a useful message if IC tables are missing.
2171 (load_depfile): Ditto.
2172 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2173 distinguish preferred disassembly.
2174 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2175 format. Fix incorrect flag on fma.s/fma.s.s0.
2176 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2177 the highest priority.
2178 * ia64-opc-b.c: Use more abbreviations.
2179 * ia64-asmtab.c: Regenerate.
2181 2000-04-21 Jason Eckhardt <jle@redhat.com>
2183 * hppa-dis.c (extract_16): New function.
2184 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2185 new operand types l,y,&,fe,fE,fx.
2187 2000-04-21 Richard Henderson <rth@redhat.com>
2188 David Mosberger <davidm@hpl.hp.com>
2189 Timothy Wall <twall@redhat.com>
2190 Bob Manson <manson@charmed.cygnus.com>
2191 Jim Wilson <wilson@redhat.com>
2193 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2194 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2195 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2197 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2198 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2199 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2200 * Makefile.in: Rebuild.
2201 * configure Rebuild.
2202 * configure.in (bfd_ia64_arch): New target.
2203 * disassemble.c (ARCH_ia64): Define.
2204 (disassembler): Support ARCH_ia64.
2205 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2206 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2207 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2208 ia64-war.tbl, ia64-waw.tbl: New files.
2210 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2212 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2213 (disassemble): Use them.
2215 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2217 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2218 * Makefile.am: Update dependencies.
2219 * Makefile.in: Regenerate.
2221 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2223 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2224 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2225 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2226 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2227 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2228 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2229 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2230 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2231 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2232 ansidecl.h as sysdep.h includes it.
2234 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2236 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2237 --enable-build-warnings option.
2238 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2239 * Makefile.in, configure: Re-generate.
2241 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2243 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2244 stc GBR,@-<REG_N> is available for arch_sh1_up.
2245 Group parallel processing insn with identical mnemonics together.
2246 Make three-operand psha / pshl come first.
2248 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2250 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2251 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2252 (sh_arg_type): Add A_PC.
2253 (sh_table): Update entries using immediates. Add repeat.
2254 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2255 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2257 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2259 * po/opcodes.pot: Regenerate.
2261 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2262 (DEP): Quote when passing vars to sub-make. Add warning message
2264 (DEP1): Rewrite for "gcc -MM".
2265 (CLEANFILES): Add DEP2.
2266 Update dependencies.
2267 * Makefile.in: Regenerate.
2269 2000-04-03 Denis Chertykov <denisc@overta.ru>
2271 * avr-dis.c: Syntax cleanup.
2272 (add0fff): Print the pc relative address as a signed number.
2273 (add03f8): Likewise.
2275 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2277 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2278 the parameter ATTRIBUTE_UNUSED.
2279 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2281 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2283 * m10300-opc.c: SP-based offsets are always unsigned.
2285 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2287 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2288 [branch always] instead of "undefined".
2290 2000-03-27 Nick Clifton <nickc@redhat.com>
2292 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2293 short instructions, from end of list of long instructions.
2295 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2297 * Makefile.am (CFILES): Add avr-dis.c.
2298 (ALL_MACHINES): Add avr-dis.lo.
2300 2000-03-27 Alan Modra <alan@linuxcare.com>
2302 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2304 (print_insn_avr): Call function via pointer in K&R compatible way.
2305 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2306 add0fff, add03f8): Convert to old style function declaration and
2308 (avrdis_opcode): Add prototype.
2310 2000-03-27 Denis Chertykov <denisc@overta.ru>
2312 * avr-dis.c: New file. AVR disassembler.
2313 * configure.in (bfd_avr_arch): New architecture support.
2314 * disassemble.c: Likewise.
2315 * configure: Regenerate.
2317 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2319 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2321 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2323 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2324 flag to determine if operand is pc-relative.
2326 (d30v_format_table):
2327 (REL6S3): Renamed from IMM6S3.
2328 Added flag OPERAND_PCREL.
2329 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2330 added flag OPERAND_PCREL.
2331 (IMM12S3U): Replaced with REL12S3.
2332 (SHORT_D2, LONG_D): Delay target is pc-relative.
2333 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2334 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2335 using the REL* operands.
2336 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2337 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2338 LONG_Db, using REL* operands.
2339 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2340 (d30v_opcode_table): Use new *r formats.
2342 2000-02-28 Nick Clifton <nickc@redhat.com>
2344 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2345 'signed_overflow_ok_p'.
2347 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2349 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2350 name of the libtool directory.
2351 * Makefile.in: Rebuild.
2353 2000-02-24 Nick Clifton <nickc@redhat.com>
2355 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2356 (cgen_clear_signed_overflow_ok): New function.
2357 (cgen_signed_overflow_ok_p): New function.
2359 2000-02-23 Andrew Haley <aph@redhat.com>
2361 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2362 m32r-ibld.c, m32r-opc.h: Rebuild.
2364 2000-02-23 Linas Vepstas <linas@linas.org>
2366 * i370-dis.c, i370-opc.c: New.
2368 * disassemble.c (ARCH_i370): Define.
2369 (disassembler): Handle it.
2371 * Makefile.am: Add support for Linux/IBM 370.
2372 * configure.in: Likewise.
2374 * Makefile.in: Regenerate.
2375 * configure: Likewise.
2377 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2379 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2380 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2383 2000-02-22 Andrew Haley <aph@redhat.com>
2385 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2387 * mips-opc.c (G6): New define.
2388 (mips_builtin_op): Add "move" definition for -gp32.
2390 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2392 From Grant Erickson <gerickso@Brocade.COM>:
2393 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2395 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2397 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2400 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2402 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2403 (print_insn_ppi): Likewise.
2404 (print_insn_shx): Use info->mach to select appropriate insn set.
2405 Add support for sh-dsp. Remove FD_REG_N support.
2406 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2407 (sh_arg_type): Likewise. Remove FD_REG_N.
2408 (sh_dsp_reg_nums): New enum.
2409 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2410 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2411 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2412 (arch_sh3_dsp_up): Likewise.
2413 (sh_opcode_info): New field: arch.
2414 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2415 D_REG_N. Fill in arch field. Add sh-dsp insns.
2417 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2419 * arm-dis.c: Change flavor name from atpcs-special to
2420 special-atpcs to prevent name conflict in gdb.
2421 (get_arm_regname_num_options, set_arm_regname_option,
2422 get_arm_regnames): New functions. API to access the several
2423 flavor of register names. Note: Used by gdb.
2424 (print_insn_thumb): Use the register name entry from the currently
2425 selected flavor for LR and PC.
2427 2000-02-10 Nick Clifton <nickc@redhat.com>
2429 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2431 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2432 "mulsh.h" instructions.
2433 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2435 (print_insn_mcore): Add support for little endian targets.
2436 Add support for MULSH and OPSR classes.
2438 2000-02-07 Nick Clifton <nickc@redhat.com>
2440 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2441 Previous delat did not take.
2443 2000-02-03 Timothy Wall <twall@redhat.com>
2445 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2446 to adjust target address bounds checking and calculate the
2447 appropriate octet offset into data.
2449 2000-01-27 Nick Clifton <nickc@redhat.com>
2451 * arm-dis.c: (parse_disassembler_option): Rename to
2452 parse_arm_disassembler_option and allow to be exported.
2454 * disassemble.c (disassembler_usage): New function: Print out any
2455 target specific disassembler options.
2456 Call arm_disassembler_options() if the ARM architecture is being
2459 * arm-dis.c (NUM_ELEM): Define this macro if not already
2461 (arm_regname): New struct type for ARM register names.
2462 (arm_toggle_regnames): Delete.
2463 (parse_disassembler_option): Use register name structure.
2464 (print_insn): New function: Combines duplicate code found in
2465 print_insn_big_arm and print_insn_little_arm.
2466 (print_insn_big_arm): Call print_insn.
2467 (print_insn_little_arm): Call print_insn.
2468 (print_arm_disassembler_options): Display list of supported,
2469 ARM specific disassembler options.
2471 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2473 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2474 ARM_STT_16BIT flag as Thumb code symbols.
2476 * arm-dis.c (printf_insn_little_arm): Ditto.
2478 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2480 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2481 of raw thumb instructions.
2483 2000-01-20 Nick Clifton <nickc@redhat.com>
2485 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2487 2000-01-03 Nick Clifton <nickc@cygnus.com>
2489 * arm-dis.c (streq): New macro.
2490 (strneq): New macro.
2491 (force_thumb): ew local variable.
2492 (parse_disassembler_option): New function: Parse a single, ARM
2493 specific disassembler command line switch.
2494 (parse_disassembler_option): Call parse_disassembler_option to
2495 parse individual command line switches.
2496 (print_insn_big_arm): Check force_thumb.
2497 (print_insn_little_arm): Check force_thumb.
2499 For older changes see ChangeLog-9899
2505 version-control: never