2 Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
4 * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
5 * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
6 (extract_ffstreg): Fix calculation of reg part of returned value.
9 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
11 * dis-buf.c (generic_strcat_address): reformat to GNU coding
12 conventions. change sprintf call to an sprintf_vma call.
15 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
17 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
20 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
22 The following changes were made by
23 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
24 David Taylor <taylor@texas.cygnus.com>, and
25 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
26 merge in changes by HP; HP did not create ChangeLog entries.
28 * dis-buf.c (generic_strcat_address): new function.
30 * hppa-dis.c: Changes to improve hppa disassembly.
31 Changed formatting in : reg_names, fp_reg_names,control_reg,
32 New variables : sign_extension_names, deposit_names, conversion_names
33 float_test_names, compare_cond_names_double, add_cond_names_double,
34 logical_cond_names_double, unit_cond_names_double,
35 branch_push_pop_names, saturation_names, shift_names, mix_names,
36 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
37 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
38 (fput_const): renamed as fput_hex_const
40 - use the macros fputs_filtered and
41 fput_decimal_const whenever possible; calls to sign_extend require
42 2 params -- add a missing second param of 0.
43 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
44 architecture version number of current machine. HP folks are
45 trying to handle situation where the target program was compiled
46 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
48 - added new cases : 'g', 'B', 'm'
49 - added cases specifically for PA 2.0
50 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
51 - calls to fput_const become calls to fput_hex_const
53 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
55 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
56 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
58 (CLEANFILES): Add stamp-i960.
60 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
63 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
64 * Makefile.in: Rebuilt.
65 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
67 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
68 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
71 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
73 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
76 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
78 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
80 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
81 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
84 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
86 * fr30-opc.c: Regenerate.
88 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
90 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
92 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
94 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
96 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
98 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
101 1998-11-30 Doug Evans <devans@casey.cygnus.com>
103 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
104 CGEN_INSN_BASE_VALUE.
105 start-sanitize-cygnus
106 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
107 New args word_offset, word_length. Rewrite.
109 (insert_1): Fix lsb0 case.
110 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
111 New args word_offset, word_length. Rewrite.
113 (extract_1): Fix lsb0 case.
114 * cgen-opc.in (FLD): Define.
116 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
118 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
121 start-sanitize-cygnus
122 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
124 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
125 * Makefile.in: Rebuild.
129 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
131 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
133 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
135 * fr30-asm.c,fr30-dis.c: Regenerated.
137 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
139 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
141 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
143 * fr30-opc.c: Regenerated.
145 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
147 * fr30-opc.c: Regenerated.
148 * fr30-opc.h: Regenerated.
149 * fr30-dis.c: Regenerated.
150 * fr30-asm.c: Regenerated.
153 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
155 * mips-opc.c (sync.p,sync.l): Swap insn values.
158 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
160 * fr30-opc.c: Regenerate.
162 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
164 * fr30-opc.c: Regenerated.
165 * fr30-opc.h: Regenerated.
168 1998-11-18 Doug Evans <devans@casey.cygnus.com>
170 start-sanitize-cygnus
171 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
172 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
174 (insert_insn_normal): Fix typo.
175 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
176 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
177 Rewrite ! CGEN_INT_INSN_P case.
178 (extract_insn_normal): Ditto.
179 (extract_1): New arg `pc'. All callers updated.
180 Replace calls to bfd_getb8.
181 (fill_cache): New fn.
182 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
183 * cgen-opc.in: ... from here.
184 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
186 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
188 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
192 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
194 * fr30-opc.c: Regenerated.
196 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
198 * fr30-opc.c: Regenerated.
199 * fr30-opc.h: Regenerated.
200 * fr30-dis.c: Regenerated.
201 * fr30-asm.c: Regenerated.
203 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
205 * po/opcodes.pot: Regenerated.
206 * fr30-opc.c: Regenerated.
207 * fr30-opc.h: Regenerated.
208 * fr30-dis.c: Regenerated.
209 * fr30-asm.c: Regenerated.
211 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
213 * disassemble.c (disassembler): Add support for FR30 target.
216 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
218 start-sanitize-cygnus
219 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
220 CGEN_OPERAND_SEM_ONLY.
222 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
224 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
226 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
228 * po/opcodes.pot: Regenerate.
229 * po/POTFILES.in: Regenerate.
230 * fr30-opc.c: Regenerate.
231 * fr30-opc.h: Regenerate.
233 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
235 * m32r-asm.c: Regenerate.
238 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
240 * configure.in: Added case for bfd_fr30_arch.
241 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
242 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
243 (CLEANFILES): Added stamp-fr30.
245 * fr30-asm.c: New file.
246 * fr30-dis.c: New file.
247 * fr30-opc.c: New file.
248 * fr30-opc.h: New file.
249 * po/POTFILES.in: Regenerated
250 * po/opcodes.pot: Regenerated
254 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
256 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
257 to bcl8,bncl8 entries.
258 (macro_insn_table_entries): Add FILL_SLOT attribute
259 to bcl8r,bncl8r entries.
262 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
264 * configure.in: detect cygwin* instead of cygwin32*
265 * configure: regenerate
267 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
269 * mips-opc.c (IS_M): Added.
272 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
274 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
278 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
280 start-sanitize-cygnus
281 * cgen-asm.in (insert_1): New function.
282 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
283 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
284 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
285 * cgen-dis.in (extract_1): New function.
286 (extract_normal): buf_ctrl renamed to ex_info, update type.
287 Progress on handling of CGEN_INT_INSN_P.
288 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
289 Update handling of CGEN_INT_INSN_P. Handle errors from
290 @arch@_cgen_extract_operand.
291 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
292 (default_print_insn): Renamed from print_insn.
293 Handle ! CGEN_INT_INSN_P.
294 (print_insn_@arch@): Handle error returns from print_insn.
295 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
296 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
297 (@arch@_cgen_lookup_get_insn_operands): Ditto.
299 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
302 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
304 * m10300-opc.c: Allow autoincrement stores using the same register
305 for source and destination operands.
307 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
309 * m10300-opc.c: DSP instrutions which only write to one general
310 register have no restrictions on matching operands.
312 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
315 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
317 * m32r-opc.h,m32r-opc.c: Regenerate.
320 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
322 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
325 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
327 * i386-dis.c (OP_3DNowSuffix): New static function.
330 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
331 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
332 (insn_codep): New static variable.
333 (print_insn_x86): Init insn_codep after prefixes.
334 (grps): Add GRP14 entries for prefetch, prefetchw.
337 From Jeff B Epler <jepler@usgs.gov>
338 * i386-dis.c (Suffix3DNow): New table.
340 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
342 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
344 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
346 * d10v-dis.c (print_operand): If num is nonzero, then
347 add OPERAND_ACC1, not OPERAND_ACC0.
349 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
351 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
354 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
356 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
360 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
362 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
365 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
367 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
369 start-sanitize-nortel-ppc750
370 1998-09-09 Michael Meissner <meissner@cygnus.com>
372 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
375 end-sanitize-nortel-ppc750
376 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
378 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
380 (print_insn_little_arm): Detect Thumb symbols in elf object
383 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
385 * alpha-dis.c (print_insn_alpha): Use the machine type to
386 decide which PALcode set to include.
388 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
390 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
392 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
394 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
395 MSUB and MSUBS instructions.
398 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
400 * mips-opc.c: Insert contents of vu0.h, rather than including it.
402 * Makefile.am: Rebuild dependencies.
406 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
408 * ppc-opc.c (powerpc_operands): Omit parens around additions in
411 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
413 start-sanitize-coldfire
414 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
415 ColdFire, as below for mulsl and mulul.
417 end-sanitize-coldfire
418 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
419 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
420 +, -, and d for ColdFire.
422 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
423 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
424 (extract_mbe): Likewise.
426 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
428 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
430 * m10300-opc.c: First cut at UDF instructions.
432 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
434 * m32r-opc.c: Regenerate (remove semantic descriptions).
436 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
438 * arm-dis.c (print_insn_big_arm): Fix indentation.
439 (print_insn_little_arm): Likewise.
441 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
443 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
445 (print_insn_little_arm): Likewise.
447 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
449 Move all global state data into opcode table struct, and treat
450 opcode table as something that is "opened/closed".
451 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
452 (cgen_asm_init): Delete.
453 (cgen_set_parse_operand_fn): New function.
454 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
455 (cgen_dis_init): Delete.
456 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
457 (cgen_current_{opcode_table_mach,endian}): Delete.
458 start-sanitize-cygnus
459 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
460 * cgen-dis.in (all fns): Ditto.
461 * cgen-opc.in (all fns): Ditto.
463 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
465 start-sanitize-cygnus
466 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
468 * cgen-dis.in (print_normal): Split into two.
469 (print_address): New function.
470 (extract_insn_normal): Clarify insn_value arg.
471 (print_int_insn): Renamed from print_insn.
472 (print_insn): New arg.
473 (print_insn_@arch@): Open opcode table if not already done so.
474 Move reading of insn into print_insn.
477 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
479 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
483 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
485 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
486 accept an accumulator choice.
487 * m32r-opc.c,m32r-opc.h: Regenerate.
490 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
492 * m10300-opc.c: Add entries for "no_match_operands" field in
496 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
498 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
502 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
504 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
507 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
509 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
511 * m10300-opc.c: Add autoincrement memory loads/stores.
515 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
517 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
518 phmsubh respectively.
521 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
523 start-sanitize-cygnus
524 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
526 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
527 @arch_cgen_get_int_operand.
528 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
529 Update call to @arch@_cgen_insert_operand.
530 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
531 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
532 (extract_insn_normal): New arg `pc', callers updated.
533 Update call to @arch@_cgen_extract_operand.
534 (print_insn): Update call to CGEN_EXTRACT_FN.
536 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
539 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
541 * m10300-opc.c: Fix load to sp and store from sp for the am33.
542 Add more multimedia instructions.
544 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
546 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
551 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
553 * mips-opc.c (pref): Enabled for the r5900.
556 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
558 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
560 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
562 (OP_J): Remove unnecessary subtraction when 16-bit displacement
563 will be masked later.
566 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
568 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
571 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
573 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
574 from raw register #s to symbolic names to make debugging easier.
577 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
579 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
581 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
583 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
584 start-sanitize-cygnus
585 * Makefile.am (CGENDIR): Set via configure.
586 (CGEN): New variable.
587 (CGENFILES): object.scm renamed to cos.scm.
588 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
589 (stamp-m32r): Pass prefix to run-cgen.
590 * Makefile.in: Regenerate.
591 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
592 * cgen-dis.in: Ditto.
593 * cgen-opc.in: Ditto.
594 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
595 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
596 * configure: Regenerate.
600 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
602 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
604 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
606 * m10300-opc.c: Reorder more instructions so that we do not
607 accidentally match a mn10300 instruction when we really
608 wanted an am33 instruction.
611 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
613 * m10300-dis.c: Only recognize instructions from the currently
615 * m10300-opc.c: Add field indicating the particular variant of
616 the mn10300 each instruction is available on.
618 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
620 * configure.in: For bfd_vax_arch, build vax-dis.lo.
621 * Makefile.am: Rebuild dependencies.
622 (CFILES): Add vax-dis.c.
623 (ALL_MACHINES): Add vax-dis.lo.
624 * aclocal.m4: Rebuild with current libtool.
625 * configure, Makefile.in: Rebuild.
627 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
629 * vax-dis.c: New file, from work by Pauline Middelink
630 <middelin@polyware.iaf.nl>.
631 * disassemble.c (ARCH_vax): Define if ARCH_all.
632 (disassembler): Add case for ARCH_vax.
633 * makefile.vms: Support compilation on vms/vax.
636 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
638 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
639 the DVP_OPERAND_RELOC_11_S4 relocation.
643 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
645 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
647 (disassemble): Correctly handle FMT_D10 instructions.
649 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
650 am33 shift instructions.
652 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
654 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
655 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
657 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
658 (mn10300_opcodes): Reorder so as to try and select opcodes from
659 the core chip when multiple alternatives exist. Change several
660 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
661 "macbu" instructions. Fix typos in a couple DSP instructions too.
664 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
666 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
667 related to sign extension and the size of ints.
669 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
671 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
672 instructions. Support (sp) addressing mode by expanding it into
676 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
678 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
679 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
680 be used as immediate values.
684 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
686 * m10300-opc.c: Support 4 byte DSP instructions.
689 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
691 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
694 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
696 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
699 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
701 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
704 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
706 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
707 found on the mn10300.
710 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
712 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
715 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
717 * mips-dis.c (print_insn_little_mips): Previously, instruction
718 printing references the symbol table to determine whether the
719 instruction resides in a block regular instructions or mips16
720 instructions. However, when the disassembler gets used in other
721 environments where the symbol table is not present, we no longer
722 rely in the symbol table, rather, use the low bit of the
723 instructions address to guess. There should be no change for usage
724 of the disassembler in host based programs, gdb, objdump.
725 (print_insn_big_mips): ditto.
726 (print_insn_mips): ditto
728 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
730 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
732 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
735 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
736 operands for the am33.
737 (mn10300_opcodes): Add new instructions from the am33.
739 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
741 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
743 * i386-dis.c (index16): Add '%' to register names. Use ','
746 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
748 * i386-dis.c: Don't print opcode suffix when we can figure out the
749 size (and gas can!) by register operands, or from the default
751 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
753 (dis386, dis386_twobyte, grps): Use new suffix macros.
754 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
755 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
756 order of cmps operands to agree with Intel docs. Correct operand
757 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
758 agree with Intel docs.
759 (print_insn_x86): Print orphan fwait before other prefixes.
760 Return correct byte count for orphan fwait with prefixes. Don't
761 print `bound' operands in reverse order.
762 (ckprefix): Stop accumulating prefixes if we get fwait.
763 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
765 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
767 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
768 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
770 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
772 Fix problems when bfd_vma is wider than long.
773 * i386-dis.c: Make op_address and start_pc unsigned.
774 (set_op): Make parameter unsigned.
775 (print_insn_x86): Cast to bfd_vma when passing a value to
777 * ns32k-dis.c (CORE_ADDR): Don't define.
778 (print_insn_ns32k): Change type of addr to bfd_vma. Use
779 bfd_scan_vma to read back address.
780 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
782 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
783 (NEXTULONG): New definition.
784 (print_insn_m68k): Avoid overflow when computing third argument of
786 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
787 Use disp instead of val to store offset values.
788 (print_indexed): Use base_disp instead of word to store base
789 displacement, to avoid overflow.
790 * m10300-dis.c (disassemble): Cast value to long when computing
791 pc-relative address, to get correct sign extension.
793 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
795 * m32r-opc.c: Regenerate.
797 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
799 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
800 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
802 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
804 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
806 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
808 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
810 (OP_DSreg): Rename from OP_DSSI.
811 (OP_ESreg): Rename from OP_ESDI.
812 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
814 (append_seg): Rename from append_prefix.
815 (ptr_reg): New function.
816 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
818 (PREFIX_ADDR): Rename from PREFIX_ADR.
819 (float_reg): Add non-broken opcodes for people who don't want
822 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
824 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
827 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
829 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
831 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
833 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
834 0; produce error message for shifts of size 32 (or 64 for 64-bit
835 shifts), because the hardware doesn't support them.
838 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
840 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
843 * vu0.h (sqc2): Fix opcode.
845 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
849 start-sanitize-cygnus
850 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
852 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
853 Change pinfo to use WR_HILO.
856 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
858 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
859 LONG_2, LONG_2b formats to use this new operand.
861 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
863 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
865 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
867 * sparc-dis.c (print_insn_sparc): big endian instruction / little
870 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
872 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
873 and SHORT_B3b formats to use Rb instead of Ra.
875 Add FLAG_MUL16 to MUL2XH opcode.
877 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
878 to existing 1.1.1 parallelisation prohibition procedure.
880 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
882 start-sanitize-cygnus
883 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
884 * cgen-dis.in (extract_normal): Likewise.
886 * m32r-asm.c,m32r-dis.c: Regenerate.
889 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
891 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
895 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
897 * mips-opc.c (multu1): Add two operand variant for the r5900.
900 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
902 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
903 with a shift count of 0.
906 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
908 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
910 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
912 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
913 (_print_insn_mips): Likewise.
914 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
918 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
920 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
921 (cgen_hw_lookup_by_num): New function.
924 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
927 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
929 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
931 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
933 * sparc-dis.c (print_insn_sparc): Always fetch instructions
934 as big-endian on SPARClite.
937 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
939 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
941 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
945 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
947 * d30v-opc.c (pre_defined_register): Remove alias for r0.
950 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
952 * mips-opc.c (break): Added 20-bit single-operand break
953 instruction for R5900 only.
956 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
958 * po/Make-in (install-info): New target.
960 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
962 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
963 * configure: Rebuild.
965 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
967 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
968 variety of ISA2 instructions to set bottom ten bits of trap code.
970 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
972 * Makefile.am (config.status): Add explicit target so that
973 config.status depends upon bfd/configure.in.
974 * Makefile.in: Rebuild.
976 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
978 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
979 instructions to set bottom ten bits of break code.
980 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
981 for above optional argument.
983 start-sanitize-cygnus
984 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
986 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
987 * m32r-opc.h: Regenerate.
990 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
992 * makefile.vms: Run dec c with /nodebug.
994 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
996 * Makefile.in: Rebuilt.
997 * Makefile.am: Regenerated dependencies with mkdep.
999 * opintl.h (_): Define as dgettext.
1001 start-sanitize-cygnus
1002 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
1004 * configure.in: Add support for --enable-cgen-maint.
1005 * Makefile.am (M32R_DEPS): New variable.
1006 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
1007 * aclocal.m4: Regenerate.
1008 * Makefile.in: Regenerate.
1009 * configure: Regenerate.
1011 * Makefile.am (CGENFILES): Add minsn.scm.
1014 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1016 * cgen-asm.c: Internationalised.
1017 start-sanitize-cygnus
1018 * cgen-asm.in: Internationalised.
1019 * cgen-opc.in: Internationalised.
1021 * m32r-asm.c: Internationalised.
1022 * m32r-dis.c: Internationalised.
1023 * m32r-opc.c: Internationalised.
1025 * aclocal.m4: Regenerated.
1026 * configure: Regenerated.
1027 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1028 * Makefile.in: Rebuild.
1029 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1030 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1032 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1034 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1036 * aclocal.m4, configure: Rebuild with current tools.
1038 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1040 * opintl.h: New file - contains internationalisation macros used
1041 by source files in this directory.
1042 * po/: New subdirectory - contains internationalisation files.
1043 * po/Make-in: New file - Makefile constructor.
1044 * po/POTFILES.in: New file - list of files in opcodes directory
1045 that should be scan for internationalisation macros.
1046 * po/opcodes.pot: New file - list of internationisation strings
1047 found in files mentioned in po/POTFILES.in.
1048 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1049 entry. Add intl directory to include paths.
1050 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1051 HAVE_STRCPY, HAVE_LC_MESSAGES
1052 * configure.in: Add rule to build Makefile in po subdirectory.
1053 * Makefile.in: Rebuilt.
1054 * aclocal.m4: Rebuilt.
1055 * config.in: Rebuilt.
1056 * configure: Rebuilt.
1057 * alpha-opc.c: Internationalised.
1058 * arc-dis.c: Internationalised.
1059 * arc-opc.c: Internationalised.
1060 * arm-dis.c: Internationalised.
1061 * cgen-asm.c: Internationalised.
1062 * d30v-dis.c: Internationalised.
1063 * dis-buf.c: Internationalised.
1065 * dvp-dis.c: Internationalised.
1066 * dvp-opc.c: Internationalised.
1068 * h8300-dis.c: Internationalised.
1069 * h8500-dis.c: Internationalised.
1070 * i386-dis.c: Internationalised.
1071 * m10200-dis.c: Internationalised.
1072 * m10300-dis.c: Internationalised.
1073 * m68k-dis.c: Internationalised.
1074 * m88k-dis.c: Internationalised.
1075 * mips-dis.c: Internationalised.
1076 * ns32k-dis.c: Internationalised.
1077 * opintl.h: Internationalised.
1078 * ppc-opc.c: Internationalised.
1079 * sparc-dis.c: Internationalised.
1080 * v850-dis.c: Internationalised.
1081 * v850-opc.c: Internationalised.
1083 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1085 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1086 (asm_hash_table_entries): New variable.
1087 (cgen_asm_init): Free asm_hash_table_entries.
1088 (hash_insn_array,hash_insn_list): New functions.
1089 (build_asm_hash_table): Use them. Hash macro insns as well.
1090 (cgen_asm_lookup_insn): Update.
1091 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1092 (dis_hash_table_entries): New variable.
1093 (cgen_dis_init): Free dis_hash_table_entries.
1094 (hash_insn_array,hash_insn_list): New functions.
1095 (build_dis_hash_table): Use them. Hash macro insns as well.
1096 (cgen_dis_lookup_insn): Update.
1097 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1098 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1099 (cgen_macro_insn_count): New function.
1100 start-sanitize-cygnus
1101 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1102 All callers updated. Sanity check result of extract fn.
1103 (@arch@_cgen_get_insn_operands): Change result type to void.
1104 Delete args insn_value, length. New arg fields. All callers updated.
1105 (@arch@_cgen_lookup_get_insn_operands): New function.
1107 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1109 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1111 * i386-dis.c (OP_DSSI): Print segment override.
1113 start-sanitize-r5900
1114 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1116 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1119 start-sanitize-r5900
1120 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1122 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1125 start-sanitize-r5900
1126 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1128 * vu0.h (vlqd, vlqi): Update per revised specs.
1132 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1134 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1135 (vif_operands): Update.
1136 (vif_get_unpackloc): Delete.
1137 (state_vif_unpackloc{,_star_p}): Delete.
1138 (dvp_opcode_init_parse): Update.
1139 (vif_unpack_len_value): Avoid divide by zero.
1142 start-sanitize-r5900
1143 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1145 * vu0.h: Specs changed for VCALLMSR bit pattern.
1146 * mips-dis.c: (print_insn_arg) Matching change.
1149 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1151 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1154 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1156 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1157 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1158 * configure.in: Define and substitute WIN32LDFLAGS and
1160 * aclocal.m4: Rebuild with new libtool.
1161 * configure, Makefile.in: Rebuild.
1163 start-sanitize-r5900
1164 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1166 * vu0.h: Corrected bit pattern for VMAXI opcode.
1169 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1171 * m32r-opc.c: Regenerate.
1174 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1176 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1177 (dvp_expand_macro): Implement.
1178 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1179 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1182 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1184 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1185 before trying to copy it.
1186 * Makefile.in: Rebuild.
1188 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1190 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1192 start-sanitize-m32rx
1193 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1195 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1198 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1200 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1201 from an arbitrary valid buffer instead of fetching them on demand
1203 (invalid_float): use bit_extract_simple() instead of bit_extract().
1205 start-sanitize-m32rx
1206 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1208 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1209 * m32r-opc.h: Add extra control registers.
1212 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1214 From H.J. Lu <hjl@gnu.org>:
1215 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1218 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1220 * Branched binutils 2.9.
1222 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1224 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1225 disassembling last 4 bytes of a section.
1227 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1229 Fix some gcc -Wall warnings:
1230 * arc-dis.c (print_insn): Add casts to avoid warnings.
1231 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1232 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1234 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1235 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1236 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1237 (parse_ffstreg, parse_vif_mode): Likewise.
1239 * m10200-dis.c (disassemble): Likewise.
1240 * m10300-dis.c (disassemble): Likewise.
1241 * ns32k-dis.c (print_insn_ns32k): Likewise.
1242 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1243 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1244 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1245 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1246 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1248 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1249 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1250 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1252 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1253 start-sanitize-tic80
1254 * tic80-dis.c (print_one_instruction): Likewise.
1256 * w65-dis.c (print_operand): Likewise.
1257 * z8k-dis.c (fetch_data): Likewise.
1258 * a29k-dis.c: Add return type for find_byte_func_type.
1259 * arc-opc.c: Include <stdio.h>. Remove declarations of
1260 insert_multshift and extract_multshift.
1261 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1263 (extract_value): Fully parenthesize expression.
1265 * dvp-opc.c: Include <ctype.h>.
1266 (print_sdest): Add default case to switch.
1268 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1269 * h8500-opc.h (h8500_table): Fully bracket initializer.
1270 * w65-opc.h (optable): Likewise.
1271 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1272 * i386-dis.c (OP_E): Initialize local variables.
1273 * m10200-dis.c (print_insn_mn10200): Likewise.
1274 * mips-dis.c (print_insn_mips16): Likewise.
1275 * sh-dis.c (print_insn_shx): Likewise.
1276 * v850-dis.c (print_insn_v850): Likewise.
1277 * ns32k-dis.c (print_insn_arg): Declare.
1278 (get_displacement, invalid_float): Declare.
1279 (list_search, sign_extend, flip_bytes): Declare return type.
1280 (get_displacement): Likewise.
1281 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1283 (print_insn_ns32k): Make i unsigned.
1284 (invalid_float): Make static. Declare type of val.
1285 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1286 on each for iteration.
1287 * tic30-dis.c (get_indirect_operand): Likewise.
1288 * z8k-dis.c (print_insn_z8001): Declare return type.
1289 (print_insn_z8002): Likewise.
1290 (unparse_instr): Fix sprintf format strings.
1292 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1294 * mips-opc.c: Add "sync.l" and "sync.p".
1297 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1299 * dvp-opc.c (extract_vif_datalen): Rewrite.
1300 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1302 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1304 * dvp-dis.c (print_insn): Print unpack address in hex.
1305 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1306 Don't skip over '*', just record it.
1307 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1308 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1309 Don't skip over '*', just record it.
1310 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1311 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1312 (vif_opcodes): Likewise.
1313 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1314 (vif_macros,vif_macro_count): New globals.
1315 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1316 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1317 (vif_get_wl_cl): New function.
1318 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1321 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1323 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1324 default m68k variant to recognize.
1326 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1327 (ctrl, cobr, mem, ea): Likewise.
1328 (print_addr): Likewise. Remove cast.
1329 (ea): Cast argument of print_addr to bfd_vma.
1331 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1333 (cgen_parse_unsigned_integer): Likewise.
1334 (cgen_parse_address): Likewise.
1336 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1338 * i960-dis.c (ctrl): Add full braces to structure initialization.
1339 (cobr, mem, reg): Likewise.
1340 (ea): Correct parenthesization in expression.
1342 * cgen-asm.c: Include <ctype.h>.
1343 (build_asm_hash_table): Remove unused local variable i.
1344 (cgen_parse_keyword): Add casts to avoid warnings.
1346 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1347 symbol. Fix indentation.
1348 (print_insn_little_arm): Likewise.
1350 start-sanitize-r5900
1351 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1353 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1357 start-sanitize-m32rx
1358 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1360 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1365 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1367 * dvp-opc.c (vif_operand_datalen_special): New global.
1370 start-sanitize-r5900
1371 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1373 * vu0.h (vcallms): Use 'O' for call target operand.
1374 * mips-dis.c (print_insn_arg): Handle 'O'.
1377 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1379 * configure.in: Use AM_DISABLE_SHARED.
1380 * aclocal.m4, configure: Rebuild with libtool 1.2.
1382 start-sanitize-r5900
1383 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1385 * mips-dis.c: Change '%' to '#' in r5900 support.
1389 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1391 These patches are courtesy of Jonathan Walton and Tony Thompson
1392 (athompso@cambridge.arm.com).
1394 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1397 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1398 both the offset and the label closest to the destination.
1400 start-sanitize-r5900
1401 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1403 * vu0.h: New file with cop2/vu0 instructions.
1404 * mips-opc.c: Include vu0.h.
1405 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1407 (print_insn_mips): Do not emit a tab after an instruction if the
1408 first arg is an instruction completer (&). If the next arg is an
1409 escape character (%), then print the next arg verbatim.
1410 * Makefile.am (mips-opc.lo): Depend on vu0.h
1414 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1416 * dvp-opc.c (vif_opcodes): Add stcycl.
1418 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1420 * dvp-dis.c (print_dma): Change length from 16 to 8.
1423 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1425 * m32r-opc.h: Regenerate.
1428 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1430 * dvp-opc.c (print_dest1): Print dest spec again.
1431 (print_vfreg,print_accdest): Likewise.
1432 (vif_unpack_len): Round result up to word boundary.
1435 start-sanitize-vr4320
1436 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1438 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1440 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1442 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1447 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1449 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1450 (print_insn): Do mask comparison on proper opcode word.
1451 Print unsigned values in hex.
1452 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1453 (parse_bc): Catch missing dest.
1454 (parse_vfreg): Replace atoi call with strtol.
1455 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1456 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1457 (extract_gif_eop): New function.
1458 (gif_operands): Update eop entry.
1459 (VGIFOP,VGIFNREGS): Fix calcs.
1460 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1461 (gif_regs): Add entry for unused 11 case.
1462 (print_gif_regs): Print empty list instead of nothing.
1463 (extract_gif_nloop): Fix value calc.
1464 (print_gif_nloop): Always print value, even if 0.
1465 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1466 (vif_operands): Use them for wl,cl fields.
1467 (state_vif_wl,state_vif_cl): New static locals.
1468 (parse_vif_mode): Handle numeric args.
1469 (vif_unpack_len_value,vif_unpack_len): New functions.
1470 (vif_insn_len): Call vif_unpack_len.
1473 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1475 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1477 start-sanitize-cygnus
1478 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1480 * cgen-asm.in: Move insertion of generated routines to top of file.
1481 (insert_normal): Add prototype. Delete `shift' arg.
1482 * cgen-dis.in: Move insertion of generated routines to top of file.
1483 (extract_normal): Add prototype. Delete `shift' arg.
1484 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1485 (print_keyword): Add prototype. Fix type of `attrs' arg.
1488 start-sanitize-vr4320
1489 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1491 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1492 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1495 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1497 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1498 assume that info->symbols is non-empty.
1500 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1502 * alpha-opc.c (cvtqs) There is no such thing.
1503 (cvttq): Missing most of the /*d variants.
1505 start-sanitize-r5900
1506 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1508 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1510 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1511 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1514 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1516 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1517 delayed branches or jumps.
1520 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1522 * dvp-opc.c (vif_operands): Add unpack[u] support.
1523 (vif_opcodes): Ditto.
1524 (*_vif_imrubits): Renamed from *_vif_imrbits.
1526 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1528 * dvp-dis.c (print_insn): Handle word number.
1529 Handle mips address vs vu address.
1530 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1531 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1532 ({insert,extract}_dma_addr): Fix word ofset.
1533 ({insert,print}_gif_regs): Fix encode/decode.
1536 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1538 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1540 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1541 * tic30-dis.c (print_branch): Likewise.
1543 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1544 * dvp-dis.c (dvp_info_mach_type): New function.
1545 (print_insn_dvp): Call it.
1546 (print_vif): Return length of 4 if mpg or direct insn so following
1547 insns get properly disabled.
1548 (print_gif): Fix word order.
1549 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1550 (gif_operands): Fix word order.
1551 (gif_opcodes): Likewise.
1552 ({insert,extract,print}_gif_regs): Likewise.
1553 (gif_regs): Add new register number/name changes.
1554 (dma_opcodes): Add dmarefe insn.
1557 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1559 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1560 saved_symbol code as it is no longer needed.
1562 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1564 * cgen-asm.c: Include symcat.h.
1565 * cgen-dis.c,cgen-opc.c: Ditto.
1566 start-sanitize-cygnus
1567 * cgen-asm.in,cgen-dis.in: Ditto.
1569 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1572 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1574 * dvp-opc.c (extra_dma_flags): Fix typos.
1575 (dma_operands): Fix word numbers.
1576 (dma_opcodes): Likewise.
1577 ({insert,extract}_dma_flags): Likewise.
1580 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1582 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1585 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1587 * dvp-dis.c (print_gif): Complete.
1588 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1589 (state_gif_{nregs,regs,nloop}): New static locals.
1590 (*_gif_*): Complete.
1591 (dvp_opcode_init_{parse,print}): Init gif state locals.
1592 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1593 (vif_insn_len): Handle `unpack'.
1594 ({insert,extract}_dma_flags): Complete.
1597 start-sanitize-r5900
1598 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1600 * mips-opc.c (mula.s): Renamed from multa.s.
1603 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1605 * m32r-opc.[ch]: Regenerate.
1608 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1610 * dvp-opc.c (dma_operands): Rewrite.
1611 (dma_operand_{count,addr}): New globals.
1612 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1613 (insert_dma_addr): Insert value into insn.
1614 (extract_dma_addr): Extract value from insn.
1616 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1618 * dvp-dis.c (print_vu): Handle loi insns.
1619 (print_insn): Likewise.
1620 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1621 (vu_operands): Make LDEST1 a FAKE operand.
1622 (parse_dest1): Allow elided argument.
1623 (print_dest1): Don't print the argument.
1625 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1627 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1628 (print_vfreg): Don't print dest spec.
1629 (parse_accdest): Dest spec is optional.
1630 (print_accdest): Don't print dest spec.
1633 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1635 start-sanitize-cygnus
1636 * Makefile.am (CGENFILES): Update.
1637 * Makefile.in: Regenerate.
1638 * cgen-asm.in (insert_normal): Result is error message now.
1639 Validate value to be inserted.
1640 (insert_insn_normal): Result is error message now.
1641 (@arch@_cgen_assemble_insn): Update.
1643 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1644 arguments. Don't perform validation here.
1645 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1647 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1649 start-sanitize-cygnus
1650 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1651 operand instance list.
1653 * m32r-opc.c: Regenerate.
1655 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1657 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1658 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1660 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1662 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1664 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1666 * configure.in: Get the version number from BFD.
1667 * configure: Rebuild.
1669 From H.J. Lu <hjl@gnu.org>:
1670 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1671 * Makefile.in: Rebuild.
1673 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1675 * m32r-opc.c: Regenerate.
1676 * m32r-opc.h: Regenerate.
1678 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1680 start-sanitize-cygnus
1681 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1682 Ignore ALIAS insns if asked to.
1683 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1685 * m32r-opc.c: Regenerate.
1688 * dvp.opc.c: Nicely format opcode tables.
1689 (vu_operands): New element UFLAGS.
1690 (parse_uflags,print_uflags): New functions.
1691 (vu_upper_opcodes): Add UFLAGS to all insns.
1694 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1696 Fix rac to accept only a0:
1697 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1698 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1699 Introduce OPERAND_GPR.
1700 * d10v-dis.c (print_operand): Likewise.
1702 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1704 start-sanitize-cygnus
1705 * cgen-opc.in: New file.
1706 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1707 * Makefile.am (CGENFILES): Add cgen-opc.in.
1708 * Makefile.in: Regenerate.
1709 * cgen-dis.in (*): Use PTR instead of void *.
1710 (print_insn): Delete unused vars `i', `syntax'.
1712 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1713 (cgen_hw_lookup): Make result const.
1714 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1717 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1719 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1720 (vif_opcodes): Update renamed insns.
1721 * dvp-dis.c (*): Likewise.
1724 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1726 * configure, aclocal.m4: Rebuild with new libtool.
1728 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1730 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1731 instructions use a PC relative branch, not absolute.
1733 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1735 * configure.in: Set libtool_enable_shared rather than
1736 libtool_shared. Remove diversion hack.
1737 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1739 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1741 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1742 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1744 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1746 * tic30-dis.c: New file.
1747 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1748 * configure.in: Handle bfd_tic30_arch.
1749 * Makefile.am: Rebuild dependencies.
1750 (CFILES): Add tic30-dis.c
1751 (ALL_MACHINES): Add tic30-dis.lo.
1752 * configure, Makefile.in: Rebuild.
1754 start-sanitize-m32rx
1755 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1757 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1758 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1759 macwhi-a and macwlo-a instructions.
1763 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1765 * dvp-opc.c, fixed encoding of a bunch of instructions to
1766 be consistent with the asmvu assembler (and inconsistent
1767 with the specification).
1769 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1771 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1772 in the opcode table. The pkemscalf instruction must come first.
1774 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1776 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1779 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1781 * m32r-opc.h (HAVE_CPU_M32R): Define.
1784 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1786 * dvp-dis.c, dvp-opc.c: New files.
1787 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1788 * configure: Regenerate.
1789 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1790 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1791 (mips-dis.lo): Compile with @archdefs@.
1792 * Makefile.in: Regenerate.
1793 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1794 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1797 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1799 * v850-opc.c (insertion routines): If both alignment and size is
1800 wrong then report this.
1802 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1804 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1805 Only recognize instructions for the current target_processor.
1807 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1809 * d10v-dis.c (PC_MASK): Correct value.
1810 (print_operand): If there's a reloc, don't calculate the
1811 address because they could be in different sections.
1813 start-sanitize-cygnus
1814 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1816 * cgen.sh: Rewrite to be like simulator's version.
1817 * Makefile.am (cgen): Update call to cgen.sh.
1818 * Makefile.in: Regenerate
1821 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1823 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1824 instruction after the 4650's "mul" instruction; nobody's using the
1825 4010 these days. If object files someday indicate which processor
1826 variant they're intended for, we can do a better job at this.
1828 start-sanitize-r5900
1829 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1831 * mips-opc.c (c.lt.s): Add r5900 variant.
1835 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1837 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1838 table provided entry size. Use CGEN_INSN_MNEMONIC.
1839 (cgen_parse_keyword): Rewrite.
1840 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1841 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1842 * cgen-opc.c: Clean up pass over `struct foo' usage.
1843 (cgen_keyword_lookup_value): Handle "" entry.
1844 (cgen_keyword_add): Likewise.
1845 start-sanitize-cygnus
1846 * Makefile.am: Add cgen support.
1847 * Makefile.in: Regenerate.
1848 * configure.in: Add cgen support.
1849 * configure: Regenerate.
1850 * aclocal.m4: Regenerate.
1851 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1854 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1856 * mips-opc.c: Add FP_D to s.d instruction flags.
1858 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1860 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1862 start-sanitize-tic80
1863 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1865 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1866 PC relative offset forms before the 15 bit forms. An assembler command
1867 line option now chooses the default.
1870 start-sanitize-r5900
1871 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1873 * mips-opc.c: Add many missing r5900 instructions.
1876 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1878 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1879 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1881 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1883 * configure: Only build libopcodes shared if --enable-shared's value
1884 was `yes', or was set to `*opcodes*'.
1885 * aclocal.m4: Likewise.
1886 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1887 original source of this bit of code. It's not clear what the best fix
1890 start-sanitize-r5900
1891 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1893 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1895 start-sanitize-tic80
1896 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1898 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1899 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1900 offset forms before the 15 bit forms, to default to the long forms.
1903 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1905 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1907 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1909 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1910 symbol if none is present.
1911 (print_insn_big_arm): Prevent examination of stored symbol if
1914 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1916 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1918 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1920 * disassemble.c: Remove disasm_symaddr() function.
1922 * arm-dis.c: Use info->symbol instead of info->flags to determine
1923 if disassmbly should be in Thumb or Arm mode.
1925 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1927 * arm-dis.c: Add support for disassembling Thumb opcodes.
1928 (print_insn_thumb): New function.
1930 * disassemble.c (disasm_symaddr): New function.
1932 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1933 (thumb_opcodes): Table of Thumb opcodes.
1935 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1937 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1939 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1940 and 'v' as operand types.
1942 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1944 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1945 <olivier.carmona@di.epfl.ch>.
1946 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1947 which has a two word opcode with a one word argument.
1949 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1951 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1952 unsigned, not signed.
1953 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1955 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1957 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1958 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1959 (ftrv): Slay the cut-and-paste monster.
1961 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1963 * d10v-dis.c (print_operand):
1964 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1966 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1968 * d10v-opc.c (OPERAND_FLAG): Split into:
1969 (OPERAND_FFLAG, OPERAND_CFLAG) .
1973 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1975 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1976 field for all INSN_MACRO's.
1977 * mips16-opc.c: same
1979 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1981 * mips-opc.c (sync,cache): These are 3900 insns.
1983 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1985 sh-opc.h (sh_table): Remove ftst/nan.
1987 start-sanitize-cygnus
1988 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1990 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1991 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1993 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1997 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1999 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
2000 Add tx49 insns and configury.
2003 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2005 * mips-opc.c (ffc, ffs): Fix mask.
2007 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2009 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2012 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2014 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2015 start-sanitize-cygnus
2016 Added VR5400 instructions.
2017 (N5): New cpu-id macro.
2019 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2021 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2023 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2024 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2026 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2028 * v850-dis.c (disassemble): Replace // with /* ... */
2030 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2032 * sparc-opc.c: Add wr & rd for v9a asr's.
2033 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2034 (v9a_asr_reg_names): New variable.
2035 Patch from David Miller <davem@vger.rutgers.edu>.
2037 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2039 * sparc-opc.c (v9notv9a): New insn type.
2040 (IMPDEP): Move to the end to not conflict with edge8 et al.
2041 Patch from David Miller <davem@vger.rutgers.edu>.
2043 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2045 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2047 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2049 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2051 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2053 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2054 of disassemble_info structure to determine if an overlay address
2055 has a matching symbol in low memory.
2057 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2058 new symbol_at_address_func field in disassemble_info structure.
2060 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2062 * v850-opc.c (extract_d22): Use signed arithmatic.
2064 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2066 * mips-opc.c: Three op mult is not an ISA insn.
2068 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2070 * mips-opc.c: Fix formatting.
2072 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2074 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2075 than assuming that char is signed. Explicitly sign extend 16 bit
2076 values, rather than assuming that short is 16 bits.
2077 (OP_sI, OP_J, OP_DIR): Likewise.
2079 start-sanitize-v850e
2080 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2082 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2086 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2088 * v850-opc.c: Fix typo in comment.
2090 * v850-dis.c (disassemble): Add test of processor type when
2091 determining opcodes.
2093 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * configure.in: Use a diversion to set enable_shared before the
2096 arguments are parsed.
2097 * configure: Rebuild.
2099 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2101 * m68k-opc.c (TBL1): Use ! rather than `.
2102 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2104 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2108 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2110 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2113 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2114 * aclocal.m4: Rebuild with new libtool.
2115 * configure: Rebuild.
2117 start-sanitize-v850e
2118 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2120 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2123 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2125 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2127 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2129 * v850-opc.c (v850_opcodes): Further rearrangements.
2131 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2133 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2135 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2137 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2140 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2142 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2144 * mips16-opc.c: Added mips16 sdbbp.
2147 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2149 * v850-opc.c: Initialise processors field of v850_opcode structure.
2151 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2153 Merge changes from Martin Hunt:
2155 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2157 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2158 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2159 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2161 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2163 * d30v-dis.c (print_insn): First operand of d*i (delayed
2164 branch) instructions is relative.
2166 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2167 (d30v_operand_table): Add IMM6S3 type.
2168 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2170 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2171 and cmp instructions.
2173 * d30v-opc.c: Correct entries for repeat*, and sat*.
2174 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2175 types. Correct several formats.
2177 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2179 * d30v-opc.c (pre_defined_registers): Change control registers.
2181 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2182 SHORT_C2. Manual was incorrect.
2184 * d30v-dis.c (lookup_opcode): Return value now indicates
2185 if an opcode has a short and a long form. Used for deciding
2186 to append a ".s" or ".l".
2187 (print_insn): Append a ".s" to an instruction if it is
2188 the short form and ".l" if it is a long form. Do not append
2189 anything if the instruction has only one possible size.
2191 * d30v-opc.c: Change mulx2h to require an even register.
2192 New form: SHORT_A2; a SHORT_A form that needs an even
2193 register as the first operand.
2195 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2196 instruction was not being disassembled if there were an odd
2197 number of instructions.
2199 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2201 start-sanitize-v850e
2202 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2204 * v850-dis.c (disassemble): Improved display of register lists.
2207 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2209 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2210 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2211 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2212 fandnot1s, fandnot2s.
2214 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2216 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2218 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2220 * cgen-asm.c (cgen_parse_address): New argument resultp.
2221 All callers updated.
2222 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2224 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2226 * mn10200-dis.c (disassemble): PC relative instructions are
2227 relative to the next instruction, not the current instruction.
2229 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2231 * v850-dis.c (disassemble): Only signed extend values that are not
2232 returned by extract functions.
2233 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2235 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2237 * v850-opc.c: Update comments. Remove use of
2238 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2240 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2242 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2244 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2246 * configure: Rebuilt with latest devo autoconf for NT support.
2248 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2250 * v850-dis.c (disassemble): Use curly brace syntax for register
2253 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2254 where r0 is being used as a destination register.
2256 start-sanitize-v850e
2257 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2259 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2262 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2264 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2265 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2266 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2267 Add insns to access SGR and DBR.
2268 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2270 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2272 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2274 start-sanitize-v850e
2275 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2277 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2278 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2281 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2283 * configure (cgen_files): Add support for v850e target.
2284 * configure.in (cgen_files): Add support for v850e target.
2286 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2288 * configure (cgen_files): Add support for v850ea target.
2289 * configure.in (cgen_files): Add support for v850ea target.
2292 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2294 * configure.in (bfd_arc_arch): Add.
2295 * configure: Rebuild.
2296 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2297 * Makefile.in: Rebuild.
2298 * arc-dis.c, arc-opc.c: New files.
2299 * disassemble.c (ARCH_all): Define ARCH_arc.
2300 (disassembler): Add ARC support.
2302 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2304 start-sanitize-v850e
2305 * v850-dis.c (disassemble): Add support for v850EA instructions.
2307 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2308 (v850_opcodes): Add v850EA instructions.
2310 * v850-dis.c (disassemble): Add support for v850E instructions.
2312 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2313 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2314 insert_spe, extract_spe): New Functions.
2315 (v850_opcodes): Add v850E instructions.
2318 * v850-opc.c: Reorganised and re-layed out to improve readability
2321 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * configure: Rebuild with autoconf 2.12.1.
2325 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2327 * aclocal.m4, configure: Rebuild with new automake patches.
2329 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2331 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2332 * acinclude.m4: Just include acinclude.m4 from BFD.
2333 * aclocal.m4, configure: Rebuild.
2335 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2337 * Makefile.am: New file, based on old Makefile.in.
2338 * acconfig.h: New file.
2339 * acinclude.m4: New file.
2340 * stamp-h.in: New file.
2341 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2342 Removed shared library handling; now handled by libtool. Replace
2343 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2344 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2345 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2346 handling in AC_OUTPUT.
2347 * dep-in.sed: Change .o to .lo.
2348 * Makefile.in: Now built with automake.
2349 * aclocal.m4: Now built with aclocal.
2350 * config.in, configure: Rebuild.
2352 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2354 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2356 start-sanitize-r5900
2357 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2359 * mips-opc.c: Fix coding of mtsa.
2362 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2364 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2366 * sparc-dis.c (sorted_opcodes): New static local.
2367 (struct opcode_hash): `opcode' is pointer to const element.
2368 (build_hash): First arg is now table of sorted pointers.
2369 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2370 (compare_opcodes): Update.
2372 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2374 * cgen-opc.c: #include <ctype.h>.
2375 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2376 Handle case insensitive hashing.
2377 (hash_keyword_value): Change type of `value' to unsigned int.
2379 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2381 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2382 precision FP, mark it as such. Likewise for double precision
2383 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2385 start-sanitize-r5900
2386 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2389 start-sanitize-r5900
2390 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2392 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2393 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2396 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2398 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2400 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2401 nesting depth when all the macros are expanded.
2403 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2405 * sparc-opc.c: The fcmp v9a instructions take an integer register
2406 as a destination, not a floating point register. From Christian
2407 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2409 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2411 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2412 syntax. From Roman Hodek
2413 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2415 * i386-dis.c (twobyte_has_modrm): Fix pand.
2417 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2419 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2421 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2423 * arm-dis.c: Add prototypes for arm_decode_shift and
2426 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2428 * mips-opc.c: Add r3900 insns.
2430 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2433 print delay slot instructions on the same line. When using a PC
2434 relative load, add a comment with the value being loaded if it can
2437 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2439 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2440 to pushS/popS for segment regs and byte constant so that
2441 pushw/popw printed when in 16 bit data mode.
2443 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2444 print cbtw, cwtd in 16 bit data mode.
2445 * i386-dis.c (putop): extra case W to support above.
2447 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2448 address size prefix in 16 bit address mode.
2450 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2452 * sh-dis.c: Reindent. Rename local variable fprintf to
2455 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2457 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2459 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2461 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2463 * mips16-opc.c (mip16_opcodes): same.
2465 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2467 * m68k-opc.c (moveb): Change $d to %d.
2469 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2471 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2472 (twobyte_has_modrm): Likewise.
2474 (OP_MMX, OP_EM, OP_MS): New static functions.
2476 * i386-dis.c: Revert patch of April 4. The output now matches
2479 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2481 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2484 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2486 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2488 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2490 * Makefile.in (install): Depend upon installdirs.
2491 (installdirs): New target.
2493 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2495 From Thomas Graichen <graichen@rzpd.de>:
2496 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2497 * configure: Rebuild.
2499 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2501 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2502 Delete string{,s}.h support.
2504 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2506 * cgen-asm.c (cgen_parse_operand_fn): New global.
2507 (cgen_parse_{{,un}signed_integer,address}): Update call to
2508 cgen_parse_operand_fn.
2509 (cgen_init_parse_operand): New function.
2510 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2511 from cgen_asm_init_parse.
2512 (m32r_cgen_assemble_insn): New operand `errmsg'.
2513 Delete call to as_bad, return error message to caller.
2514 (m32r_cgen_asm_hash_keywords): #if 0 out.
2516 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2518 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2520 [case 'J']: Fix typo in register name.
2522 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2524 * configure.in: Substitute SHLIB_LIBS.
2525 * configure: Rebuild.
2526 * Makefile.in (SHLIB_LIBS): New variable.
2527 ($(SHLIB)): Use $(SHLIB_LIBS).
2529 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2531 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2533 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2535 * disassemble.c (disassembler): Handle m32r.
2537 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2539 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2540 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2541 * Makefile.in (CFILES): Add them.
2542 (ALL_MACHINES): Add them.
2543 (dependencies): Regenerate.
2544 * configure.in (cgen_files): New variable.
2545 (bfd_m32r_arch): Add entry.
2546 * configure: Regenerate.
2548 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2550 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2551 * configure: Rebuild.
2553 * Makefile.in: Rebuild dependencies.
2555 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2557 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2560 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2562 * Branched binutils 2.8.
2564 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2566 * m10200-dis.c: Rename from mn10200-dis.c.
2567 * m10200-opc.c: Rename from mn10200-opc.c.
2568 * m10300-dis.c: Rename from mn10300-dis.c
2569 * m10300-opc.c: Rename from mn10300-opc.c.
2570 * Makefile.in: Update accordingly.
2572 * mips16-opc.c: Add mul and dmul macros.
2574 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2576 * makefile.vms: Update CFLAGS, add clean target.
2578 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2580 * mips-opc.c: Add "wait". From Ralf Baechle
2581 <ralf@gnu.ai.mit.edu>.
2583 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2584 * configure, config.in: Rebuild.
2585 * sysdep.h: Include <stdlib.h> if it exists.
2586 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2588 * Makefile.in: Rebuild dependencies.
2590 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2592 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2593 Andrew Bray <andy@madhouse.demon.co.uk>.
2595 * mips-opc.c: Add cast when setting mips_opcodes.
2597 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2599 * v850-dis.c (disassemble): Fix sign extension problem.
2600 * v850-opc.c (extract_d*): Fix sign extension problems to make
2601 disassembly calculate branch offsets correctly.
2603 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2605 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2607 * mips-opc.c: Add dctr and dctw.
2609 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2611 * d30v-dis.c (print_insn): Change the way signed constants
2614 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2616 * Makefile.in (BFD_H): New variable.
2617 (HFILES): New variable.
2618 (CFILES): Add all C files.
2619 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2620 Delete old dependencies, and build new ones.
2621 * dep-in.sed: New file.
2623 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2625 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2627 start-sanitize-coldfire
2628 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2630 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2633 end-sanitize-coldfire
2634 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2636 * mn10200-opc.c: Change "trap" to "syscall".
2637 * mn10300-opc.c: Add new "syscall" instruction.
2639 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2641 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2642 mulul insns on the coldfire.
2644 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2646 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2647 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2648 (print_insn_little_arm): Likewise.
2650 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2652 Based on patches from H.J. Lu <hjl@lucon.org>:
2653 * i386-dis.c (fetch_data): Add prototype.
2654 * m68k-dis.c (fetch_data): Add prototype.
2655 (dummy_print_address): Add prototype. Make static.
2656 * ppc-opc.c (valid_bo): Add prototype.
2657 * sparc-dis.c (build_hash_table): Add prototype.
2658 (is_delayed_branch, compute_arch_mask): Add prototypes.
2659 (print_insn_sparc): Make several local variables const.
2660 (compare_opcodes): Change arguments to const PTR. Add prototype.
2661 * sparc-opc.c (arg): Change name field to be const.
2662 (lookup_name, lookup_value): Add prototypes. Change table and
2663 name parameters to be const.
2664 (sparc_encode_asi): Change name parameter to be const.
2665 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2666 (sparc_encode_sparclet_cpreg): Likewise.
2667 (sparc_decode_asi): Change return type to be const.
2668 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2669 (sparc_decode_sparclet_cpreg): Likewise.
2671 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2673 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2674 Solaris doesn't like the combined options, and the -f is
2676 (stamp-tshlink, install): Likewise.
2678 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2680 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2683 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2685 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2687 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2689 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2692 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2694 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2696 start-sanitize-tic80
2697 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2699 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2701 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2703 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2706 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2708 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2709 floatformat_to_double to make portable.
2710 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2713 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2715 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2716 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2718 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2720 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2721 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2723 start-sanitize-tic80
2724 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2726 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2727 (OFF_SL_BR_SCALED): ... to this, and added the flag
2728 TIC80_OPERAND_BASEREL to the flags word.
2729 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2733 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2735 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2736 Change mips_opcodes from const array to a pointer,
2737 and change bfd_mips_num_opcodes from const int to int,
2738 so that we can increase the size of the mips opcodes table
2741 start-sanitize-tic80
2742 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2744 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2745 store BITNUM values in the table in one's complement form
2746 to match behavior when assembler is given a raw numeric
2747 value for a BITNUM operand.
2748 * tic80-dis.c (print_operand_bitnum): Ditto.
2751 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2753 * d30v-opc.c: Removed references to FLAG_X.
2755 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2757 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2759 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2761 * Makefile.in: Added d30v object files.
2762 * configure: (bfd_d30v_arch) Rebuilt.
2763 * configure.in: (bfd_d30v_arch) Added new case.
2764 * d30v-dis.c: New file.
2765 * d30v-opc.c: New file.
2766 * disassemble.c (disassembler) Add entry for d30v.
2768 start-sanitize-tic80
2769 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2771 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2772 representations for the floating point BITNUM values.
2774 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2776 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2777 in the table in one's complement form, as they appear in the
2779 (tic80_symbol_to_value): Use macros to access predefined
2781 (tic80_value_to_symbol): Ditto.
2782 (tic80_next_predefined_symbol): New function.
2783 * tic80-dis.c (print_operand_bitnum): Remove code that did
2784 one's complement for BITNUM values.
2787 start-sanitize-r5900
2788 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2790 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2793 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2795 * makefile.vms: Remove 8 bit characters. Update to latest
2798 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2800 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2802 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2804 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2805 (IMM24_PCREL): Likewise.
2807 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2809 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2810 address for an extended PC relative instruction that is not a
2813 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2815 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2818 start-sanitize-tic80
2819 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2821 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2822 (tic80_opcodes): Sort entries so that long immediate forms
2823 come after short immediate forms, making it easier for
2824 assembler to select the right one for a given operand.
2827 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2829 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2831 (print_insn_mips16): Likewise.
2833 start-sanitize-r5900
2834 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2836 * mips-opc.c: add r5900.
2839 start-sanitize-tic80
2840 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2842 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2843 a symbol class that restricts translation to just that
2844 class (general register, condition code, etc).
2846 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2848 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2849 and REG_DEST_E for register operands that have to be
2850 an even numbered register. Add REG_FPA for operands that
2851 are one of the floating point accumulator registers.
2852 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2853 (tic80_opcodes): Change entries that need even numbered
2854 register operands to use the new operand table entries.
2855 Add "or" entries that are identical to "or.tt" entries.
2858 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2860 * mips16-opc.c: Add new cases of exit instruction for
2862 * mips-dis.c (print_mips16_insn_arg): Display floating point
2863 registers in operands of exit instruction. Print `$' before
2864 register names in operands of entry and exit instructions.
2866 start-sanitize-tic80
2867 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2869 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2870 pairs for all predefined symbols recognized by the assembler.
2871 Also used by the disassembling routines.
2872 (tic80_symbol_to_value): New function.
2873 (tic80_value_to_symbol): New function.
2874 * tic80-dis.c (print_operand_control_register,
2875 print_operand_condition_code, print_operand_bitnum):
2876 Remove private tables and use tic80_value_to_symbol function.
2879 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2881 * d10v-dis.c (print_operand): Change address printing
2882 to correctly handle PC wrapping. Fixes PR11490.
2884 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2886 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2889 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2891 * mips-dis.c (print_insn_mips16): Set insn_info information.
2892 (print_mips16_insn_arg): Likewise.
2894 * mips-dis.c (print_insn_mips16): Better handling of an extend
2895 opcode followed by an instruction which can not be extended.
2897 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2899 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2900 coldfire moveb instruction to not allow an address register as
2901 destination. Although the documentation does not indicate that
2902 this is invalid, experiments uncovered unexpected behavior.
2903 Added a comment explaining the situation. Thanks to Andreas
2904 Schwab for pointing this out to me.
2906 start-sanitize-tic80
2907 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2909 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2910 entries are presorted so that entries with the same mnemonic are
2911 adjacent to each other in the table. Sort the entries for each
2912 instruction so that this is true.
2915 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2917 * m68k-dis.c: Include <libiberty.h>.
2918 (print_insn_m68k): Sort the opcode table on the most significant
2919 nibble of the opcode.
2921 start-sanitize-tic80
2922 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2924 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2925 "vsub", "vst", "xnor", and "xor" instructions.
2926 (V_a1): Renamed from V_a, msb of accumulator reg number.
2927 (V_a0): Add macro, lsb of accumulator reg number.
2929 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2931 * tic80-dis.c (print_insn_tic80): Broke excessively long
2932 function up into several smaller ones and arranged for
2933 the instruction printing function to be callable recursively
2934 to print vector instructions that have both a load and a
2935 math instruction packed into a single opcode.
2936 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2937 to explain why it comes after the other vector opcodes.
2940 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2942 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2943 move insns to handle immediate operands.
2945 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2947 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2948 fix operand mask in the "moveml" entries for the coldfire.
2950 start-sanitize-tic80
2951 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2953 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2954 New macros for building vector instruction opcodes.
2955 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2956 FMT_LI, which were unused. The field is now a flags field.
2957 Remove some opcodes that are possible, but illegal, such
2958 as long immediate instructions with doubles for immediate
2959 values. Add "vadd" and "vld" instructions.
2961 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2963 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2964 the order more logical. Move the shift alias instructions ("rotl",
2965 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2966 interspersed with the regular sr.x and sl.x instructions. Add
2967 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2968 "sub", "subu", "swcr", and "trap".
2970 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2972 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2973 (OFF_SL_PC): Renamed from OFF_SL.
2974 (OFF_SS_BR): New operand type for base relative operand.
2975 (OFF_SL_BR): New operand type for base relative operand.
2976 (REG_BASE): New operand type for base register operand.
2977 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2978 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2979 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2981 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2982 10 char field, padded with spaces on rhs, rather than a string
2983 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2984 than old TIC80_OPERAND_RELATIVE. Add support for new
2985 TIC80_OPERAND_BASEREL flag bit.
2987 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2989 * tic80-dis.c (print_insn_tic80): Print floating point operands
2991 * tic80-opc.c (SPFI): Add single precision floating point
2992 immediate operand type.
2993 (ROTATE): Add rotate operand type for shifts.
2994 (ENDMASK): Add for shifts.
2995 (n): Macro for the 'n' bit.
2996 (i): Macro for the 'i' bit.
2997 (PD): Macro for the 'PD' field.
2998 (P2): Macro for the 'P2' field.
2999 (P1): Macro for the 'P1' field.
3000 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3004 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3006 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3007 adding in current address for pc-relative operands.
3009 start-sanitize-tic80
3010 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3012 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3013 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3014 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3015 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3016 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3017 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3018 (REG_SCALED, LSI_SCALED): New operand types.
3019 (E): New macro for 'E' bit at bit 27.
3020 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3021 opcodes, including the various size flavors (b,h,w,d) for
3022 the direct load and store instructions.
3024 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3026 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3028 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3029 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3030 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3031 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3032 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3033 masks with "MASK_* & ~M_*" to get the M bit reset.
3034 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3036 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3038 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3039 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3040 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3042 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3043 CC, SICR, and LICR table entries.
3044 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3045 "bcnd", and "brcr" opcodes.
3048 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3050 * ppc-opc.c (powerpc_operands): Make comment match the
3051 actual fields (no shift field).
3052 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3053 start-sanitize-tic80
3054 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3055 partial implementation, work in progress.
3056 * tic80-opc.c (tic80_operands): Begin construction operands table.
3057 (tic80_opcodes): Continue populating opcodes table and start
3058 filling in the operand indices.
3059 (tic80_num_opcodes): Add this.
3062 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3064 * m68k-opc.c: Add #B case for moveq.
3066 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3068 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3069 before they are used.
3071 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3073 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3074 for "breakpoint" instruction.
3076 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3078 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3079 (dep): Use ALL_CFLAGS rather than CFLAGS.
3081 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3083 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3086 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3088 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3089 start-sanitize-tic80
3090 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3093 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3095 * mips16-opc.c: Add "abs".
3097 start-sanitize-tic80
3098 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3100 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3101 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3102 (disassembler): Add bfd_arch_tic80 support to set disassemble
3103 to print_insn_tic80.
3104 * tic80-dis.c (print_insn_tic80): Add stub.
3106 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3108 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3109 * configure: Regenerate with autoconf.
3110 * tic80-dis.c: Add file.
3111 * tic80-opc.c: Add file.
3114 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3116 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3118 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3120 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3121 (mn10200_opcodes): Use it for some logicals and btst insns.
3122 Add "break" and "trap" instructions.
3124 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3126 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3128 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3130 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3131 relative load or add now depends upon whether the instruction is
3134 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3136 * mn10200-dis.c: Finish writing disassembler.
3137 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3138 Fix mask for "jmp (an)".
3140 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3141 handle endianness issues for mn10300.
3143 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3145 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3147 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3148 instruction. Fix opcode field for "movb (imm24),dn".
3150 * mn10200-opc.c (mn10200_operands): Fix insertion position
3153 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3155 * mn10200-opc.c: Create mn10200 opcode table.
3156 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3157 but moving along nicely.
3159 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3161 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3163 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3165 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3166 specifiers for fmovem* instructions.
3168 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3170 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3172 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3174 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3177 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3179 * mn10300-opc.c: Add some comments explaining the various
3182 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3184 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3186 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3189 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3190 operand specifiers in fmovm* instructions.
3192 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3194 * ppc-opc.c (insert_li): Give an error if the offset has the two
3195 least significant bits set.
3197 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3199 * mips-dis.c (print_insn_mips16): Separate the instruction from
3200 the arguments with a tab, not a space.
3202 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3204 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3207 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3210 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * configure: Rebuild with autoconf 2.12.
3214 Add support for mips16 (16 bit MIPS implementation):
3215 * mips16-opc.c: New file.
3216 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3217 (mips16_reg_names): New static array.
3218 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3219 after seeing a 16 bit symbol.
3220 (print_insn_little_mips): Likewise.
3221 (print_insn_mips16): New static function.
3222 (print_mips16_insn_arg): New static function.
3223 * mips-opc.c: Add jalx instruction.
3224 * Makefile.in (mips16-opc.o): New target.
3225 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3226 * configure: Rebuild.
3228 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3230 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3231 operand specifiers in *save, *restore and movem* instructions.
3233 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3236 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3237 register operands for immediate arithmetic, not, neg, negx, and
3238 set according to condition instructions.
3240 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3241 specifier of the effective-address operand in immediate forms of
3242 arithmetic instructions. The specifier for the immediate operand
3243 notes how and where the constant will be stored.
3245 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3247 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3250 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3253 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3255 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3257 * mn10300-dis.c (disassemble): Handle register lists.
3259 * mn10300-opc.c: Fix handling of register list operand for
3260 "call", "ret", and "rets" instructions.
3262 * mn10300-dis.c (disassemble): Print PC-relative and memory
3263 addresses symbolically if possible.
3264 * mn10300-opc.c: Distinguish between absolute memory addresses,
3265 pc-relative offsets & random immediates.
3267 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3269 (disassemble): Handle SPLIT and EXTENDED operands.
3271 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3273 * mn10300-dis.c: Rough cut at printing some operands.
3275 * mn10300-dis.c: Start working on disassembler support.
3276 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3278 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3280 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3282 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3284 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3286 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3288 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3289 register argument is calls and jmp instructions.
3291 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3293 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3294 getx operand. Fix opcode for mulqu imm,dn.
3296 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3298 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3299 in MN10300_OPERAND_SPLIT operands for how many bits
3300 appear in the basic insn word. Add IMM32_HIGH24,
3301 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3302 (mn10300_opcodes): Use new operands as needed.
3304 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3305 for bset, bclr, btst instructions.
3306 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3308 * mn10300-opc.c (mn10300_operands): Remove many redundant
3309 operands. Update opcode table as appropriate.
3310 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3311 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3313 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3315 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3316 operands (for indexed load/stores). Fix bitpos for DI
3317 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3318 few instructions that insert immediates/displacements in the
3319 middle of the instruction. Add IMM8E for 8 bit immediate in
3320 the extended part of an instruction.
3321 (mn10300_operands): Use new opcodes as appropriate.
3323 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3325 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3326 sequential so the assembler never parallelizes it with
3329 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3331 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3332 a data/address register that appears in register field 0
3333 and register field 1.
3334 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3336 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3338 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3339 standard disassembly.
3341 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3342 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3343 Recategorize PALcode instructions.
3345 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3347 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3349 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3352 there are no operand types.
3354 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3356 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3358 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3360 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3362 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3364 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3366 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3367 and sst.w instructions.
3369 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3372 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3374 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3377 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3379 * ppc-opc.c (PPCPWR2): Define.
3380 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3383 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3385 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3386 field for movhu instruction.
3388 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3389 cast value to "long" not "signed long" to keep hpux10
3392 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3394 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3397 * mn10300-opc.c (FMT*): Remove definitions.
3399 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3400 for shift-by-register opcodes.
3402 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3403 into [AD][MN][01] for encoding the position of the register
3406 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3408 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3409 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3411 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3413 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3414 Fix various typos. Add "PAREN" operand.
3415 (MEM, MEM2): Define.
3416 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3417 operands. Fix several typos.
3419 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3422 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3424 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3425 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3427 (mn10300_opcodes): Break opcode format out into its own field.
3428 Update many operand fields to deal with signed vs unsigned
3429 issues. Fix one or two typos in the "mov" instruction
3430 opcode, mask and/or operand fields.
3432 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3434 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3435 m68851 wasn't reset.
3437 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3439 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3440 all opcodes. Very rough cut at operands for all opcodes.
3442 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3445 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3447 * mn10200-opc.c, mn10300-opc.c: New files.
3448 * mn10200-dis.c, mn10300-dis.c: New files.
3449 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3450 * disassemble.c: Break mn10x00 support into 10200 and 10300
3452 * configure.in: Likewise.
3453 * configure: Rebuilt.
3455 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3457 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3459 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3461 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3463 * disassemble (ARCH_mn10x00): Define.
3464 (disassembler): Handle bfd_arch_mn10x00.
3465 * configure.in: Recognize bfd_mn10x00_arch.
3466 * configure: Rebuilt.
3468 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3470 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3471 accordingly. Don't declare functions using op_rtn.
3473 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3475 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3476 params to be more standard.
3477 * (disassemble): Print absolute addresses and symbolic names for
3478 branch and jump targets.
3479 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3481 * (v850_opcodes): Add breakpoint insn.
3483 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3485 * m68k-opc.c: Move the fmovemx data register cases before the
3486 other cases, so that they get recognized before the data register
3487 does gets treated as a degenerate register list.
3489 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3491 * mips-opc.c: Add a case for "div" and "divu" with two registers
3492 and a destination of $0.
3494 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3496 * mips-dis.c (print_insn_arg): Add prototype.
3497 (_print_insn_mips): Ditto.
3499 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3501 * mips-dis.c (print_insn_arg): Print condition code registers as
3504 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3506 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3508 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3510 * v850-dis.c (disassemble): Make static. Provide prototype.
3512 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3514 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3517 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3519 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3520 ']' characters into the output stream.
3521 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3522 Add "memop" field to all opcodes (for the disassembler).
3523 Reorder opcodes so that "nop" comes before "mov" and "jr"
3524 comes before "jarl".
3526 * v850-dis.c (print_insn_v850): Fix typo in last change.
3528 * v850-dis.c (print_insn_v850): Properly handle disassembling
3529 a two byte insn at the end of a memory region when the memory
3530 region's size is only two byte aligned.
3532 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3534 * v850-dis.c (v850_reg_names): Define.
3535 (v850_sreg_names, v850_cc_names): Likewise.
3536 (disassemble): Very rough cut at printing operands (unformatted).
3538 * v850-opc.c (BOP_MASK): Fix.
3539 (v850_opcodes): Fix mask for jarl and jr.
3541 * v850-dis.c: New file. Skeleton for disassembler support.
3542 * Makefile.in Remove v850 references, they're not needed here.
3543 * configure.in: Add v850-dis.o when building v850 toolchains.
3544 * configure: Rebuilt.
3545 * disassemble.c (disassembler): Call v850 disassembler.
3547 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3548 (insert_d8_6, extract_d8_6): New functions.
3549 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3550 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3552 (IF4A, IF4B): Use "D7" instead of "D7S".
3553 (IF4C, IF4D): Use "D8_7" instead of "D8".
3554 (IF4E, IF4F): New. Use "D8_6".
3555 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3556 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3558 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3559 (v850_operands): Change D16 to D16_15, use special insert/extract
3560 routines. New new D16 that uses the generic insert/extract code.
3561 (IF7A, IF7B): Use D16_15.
3562 (IF7C, IF7D): New. Use D16.
3563 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3565 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3566 message. Issue an error if the branch offset is odd.
3568 * v850-opc.c: Add notes about needing special insert/extract
3569 for all the load/store insns, except "ld.b" and "st.b".
3571 * v850-opc.c (insert_d22, extract_d22): New functions.
3572 (v850_operands): Use insert_d22 and extract_d22 for
3574 (insert_d9): Fix range check.
3576 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3578 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3579 and set bits field to D9 and D22 operands.
3581 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3583 * v850-opc.c (v850_operands): Define SR2 operand.
3584 (v850_opcodes): "ldsr" uses R1,SR2.
3586 * v850-opc.c (v850_opcodes): Fix opcode specs for
3587 sld.w, sst.b, sst.h, sst.w, and nop.
3589 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3591 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3592 end of the opcode table.
3594 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3596 * d10v-opc.c (pre_defined_registers): Added register pairs,
3597 "r0-r1", "r2-r3", etc.
3599 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3601 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3602 Create I16U for an unsigned 16bit mmediate operand.
3603 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3605 * v850-opc.c (v850_operands): Define EP operand.
3606 (IF4A, IF4B, IF4C, IF4D): Use EP.
3608 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3609 with immediate operand, "movhi". Tweak "ldsr".
3611 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3612 correct. Get sld.[bhw] and sst.[bhw] closer.
3614 * v850-opc.c (v850_operands): "not" is a two byte insn
3616 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3618 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3620 * v850-opc.c (two): Get order of words correct.
3622 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3624 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3625 register source and destination operands.
3626 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3628 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3629 same thinko in "trap" opcode.
3631 * v850-opc.c (v850_opcodes): Add initializer for size field
3634 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3635 Add D8 for 8-bit unsigned field in short load/store insns.
3636 (IF4A, IF4D): These both need two registers.
3637 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3638 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3639 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3640 for "ldsr" and "stsr".
3641 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3644 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3645 short store word (sst.w).
3647 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3649 * v850-opc.c (v850_operands): Added insert and extract fields,
3650 pointers to functions that handle unusual operand encodings.
3652 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3654 * v850-opc.c (v850_opcodes): Enable "trap".
3656 * v850-opc.c (v850_opcodes): Fix order of displacement
3657 and register for "set1", "clr1", "not1", and "tst1".
3659 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3661 * v850-opc.c (v850_operands): Add "B3" support.
3662 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3665 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3667 * v850-opc.c: Close unterminated comment.
3669 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3671 * v850-opc.c (v850_operands): Add flags field.
3672 (v850_opcodes): add move opcodes.
3674 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3676 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3677 * configure: (bfd_v850v_arch) Add new case.
3678 * configure.in: (bfd_v850_arch) Add new case.
3679 * v850-opc.c: New file.
3681 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3683 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3685 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3687 * d10v-opc.c: Add additional information to the opcode
3688 table to help determinine which instructions can be done
3691 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3693 * mpw-make.sed: Update editing of include pathnames to be
3696 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3698 * arm-opc.h: Added "bx" instruction definition.
3700 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3702 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3704 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3706 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3708 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3710 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3712 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3714 * makefile.vms: Update for alpha-opc changes.
3716 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3718 * i386-dis.c (print_insn_i386): Actually return the correct value.
3719 (ONE, OP_ONE): #ifdef out; not used.
3721 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3723 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3724 Changed subi operand type to treat 0 as 16.
3726 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3728 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3731 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3733 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3734 memory transfer instructions. Add new format string entries %h and %s.
3735 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3738 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3740 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3741 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3743 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3745 * alpha-dis.c (print_insn_alpha_osf): Remove.
3746 (print_insn_alpha_vms): Remove.
3747 (print_insn_alpha): Make globally visible. Chose the register
3748 names based on info->flavour.
3749 * disassemble.c: Always return print_insn_alpha for the alpha.
3751 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3753 * d10v-dis.c (dis_long): Handle unknown opcodes.
3755 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3757 * d10v-opc.c: Changes to support signed and unsigned numbers.
3758 All instructions with the same name that have long and short forms
3759 now end in ".l" or ".s". Divs added.
3760 * d10v-dis.c: Changes to support signed and unsigned numbers.
3762 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3764 * d10v-dis.c: Change all functions to use info->print_address_func.
3766 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3768 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3769 move ccr/sr insns more strict so that the disassembler only
3770 selects them when the addressing mode is data register.
3772 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3773 * d10v-opc.c (pre_defined_registers): Declare.
3774 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3775 to pick a better name for the registers.
3777 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3779 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3780 operands for fexpand and fpmerge. From Christian Kuehnke
3781 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3783 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3785 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3786 print routine. Take new regnames and cpumask arguments.
3787 Kill the environment variable nonsense.
3788 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3789 (print_insn_alpha_vms): New function. Do VMS style regnames.
3790 * disassemble.c (disassembler): Test bfd flavour to pick
3791 between OSF and VMS routines. Default to OSF.
3793 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3795 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3796 * configure: Rebuild.
3797 * Makefile.in (install): Use @INSTALL_SHLIB@.
3799 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3801 * configure: (bfd_d10v_arch) Add new case.
3802 * configure.in: (bfd_d10v_arch) Add new case.
3803 * d10v-dis.c: New file.
3804 * d10v-opc.c: New file.
3805 * disassemble.c (disassembler) Add entry for d10v.
3807 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3809 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3810 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3812 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3814 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3815 distinguish between variants of the instruction set.
3816 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3817 distinguish between variants of the instruction set.
3819 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3821 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3822 the 8086 instruction set.
3823 * i386-dis.c: General cleanups. Make most things static. Add
3824 prototypes. Get rid of static variables aflags and dflags. Pass
3825 them as args (to almost everything).
3827 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3829 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3831 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3833 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3834 if the next arg is marked with SRC_IN_DST. Gross.
3836 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3837 we're looking for and find EXR.
3839 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3840 if we're looking for KBIT and we don't find it.
3842 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3845 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3846 3bit immediate operands.
3848 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3850 * Released binutils 2.7.
3852 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3853 <kkaempf@progis.ac-net.de>.
3855 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3857 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3859 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3861 * sparc-dis.c (print_insn_sparclite): New routine to print
3862 sparclite instructions.
3864 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3866 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3868 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3870 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3871 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3872 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3874 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3876 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3877 Use autoconf-set values.
3878 (docdir, oldincludedir): Removed.
3879 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3881 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3883 * alpha-opc.c: New file.
3884 * alpha-opc.h: Remove.
3885 * alpha-dis.c: Complete rewrite to use new opcode table.
3886 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3887 * configure: Rebuild with autoconf 2.10.
3888 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3889 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3891 (alpha-opc.o): New target.
3893 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3895 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3896 Set imm_added_to_rs1 even if the source and destination register
3899 * sparc-opc.c: Add some two operand forms of the wr instruction.
3901 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3903 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3906 * disassemble.c (disassembler): Handle H8/S.
3907 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3909 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3911 * sparc-opc.c: Add beq/teq as aliases for be/te.
3913 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3914 <sergei@msil.sps.mot.com>.
3916 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3918 * makefile.vms: New file.
3920 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3922 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3924 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3927 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3929 * i386-dis.c (OP_OFF): Call append_prefix.
3931 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3933 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3934 unsigned long to silence a warning from the Solaris PowerPC
3937 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3939 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3941 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3943 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3945 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3946 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3947 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3948 cpush, cpusha, cpull sparclet insns.
3950 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3952 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3954 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3956 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3957 Set F_FLOAT on other floating point instructions.
3959 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3961 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3963 (powerpc_opcodes): Add 860/821 specific SPRs.
3965 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3967 * configure.in: Permit --enable-shared to specify a list of
3968 directories. Set and substitute BFD_PICLIST.
3969 * configure: Rebuild.
3970 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3971 uses. Set to @BFD_PICLIST@.
3973 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3975 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3976 not "abs", which may be needed for the absolute in something
3977 like btst #0,@10:8. Print L_3 immediates separately from other
3978 immediates. Change ABSMOV reference to ABS8MEM.
3980 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3982 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3983 (current_arch_mask): New static global.
3984 (compute_arch_mask): New static function.
3985 (print_insn_sparc): Delete sparc_v9_p. New static local
3986 current_mach. Resort opcode table if current_mach changes.
3987 Generalize "insn not supported" test.
3988 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3989 Delete test for v9/!v9.
3990 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3992 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3993 (brfcx): Renamed to FBRX.
3994 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3995 coprocessor mnemonics are not supported on the sparclet).
3996 (condf): Renamed to CONDF.
3997 (SLCBCC2): Delete F_ALIAS flag.
3999 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4001 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4002 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4004 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4006 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4007 that the shared library version number is set correctly.
4009 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4011 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4012 Miles Bader <miles@gnu.ai.mit.edu>.
4013 * configure: Rebuild.
4015 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4017 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4020 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4022 * configure: Rebuild with autoconf 2.8.
4024 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4026 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4027 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4029 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4031 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4032 since they appear as targets in Makefile.in.
4033 * configure: Rebuild.
4035 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4037 * mpw-make.sed: Edit out shared library support bits.
4039 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4041 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4042 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4043 (sparc_opcodes): Add sparclet insns.
4044 (sparclet_cpreg_table): New static local.
4045 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4046 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4048 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4050 * i386-dis.c (index16): New static variable.
4051 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4053 (OP_indirE): Return result of OP_E.
4054 (OP_E): Check for 16 bit addressing mode, and disassemble
4055 correctly. Optimised 32 bit case a little. Don't print
4056 "(base,index,scale)" when sib specifies only an offset.
4058 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4060 * configure.in: Set and substitute SHLIB_DEP.
4061 * configure: Rebuild.
4062 * Makefile.in (SHLIB_DEP): New variable.
4063 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4064 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4065 COMMON_SHLIB, add them to piclist with appropriate modifications.
4066 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4067 here: just use piclist.
4069 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4071 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4072 (print_insn_sparc): Rewrite v9/not-v9 tests.
4073 (compare_opcodes): Likewise.
4074 * sparc-opc.c (MASK_<ARCH>): Define.
4075 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4076 (sparclet,v6notv9): Define.
4077 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4078 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4080 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4082 * configure.in: Call AC_PROG_CC before configure.host.
4083 * configure: Rebuild.
4085 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4087 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4089 * i386-dis.c (onebyte_has_modrm): New static array.
4090 (twobyte_has_modrm): New static array.
4091 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4093 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4095 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4098 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4100 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4103 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4105 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4106 m68010up, not just m68020up | cpu32.
4108 * Makefile.in (SONAME): New variable.
4109 ($(SHLINK)): Make a link to the transformed name, as well.
4110 (stamp-tshlink): New target.
4111 (install): Skip stamp-tshlink during install.
4113 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4115 * configure.in: Call AC_ARG_PROGRAM.
4116 * configure: Rebuild.
4117 * Makefile.in (program_transform_name): New variable.
4118 (install): Transform library name before installing it.
4120 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4122 * i960-dis.c (mem): Add HX dcinva instruction.
4124 Support for building as a shared library, based on patches from
4125 Alan Modra <alan@spri.levels.unisa.edu.au>:
4126 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4127 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4128 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4129 * configure: Rebuild.
4130 * Makefile.in (ALLLIBS): New variable.
4131 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4132 (COMMON_SHLIB, SHLINK): New variables.
4133 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4134 (STAGESTUFF): Remove variable.
4135 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4136 (stamp-piclist, piclist): New targets.
4137 ($(SHLIB), $(SHLINK)): New targets.
4138 ($(OFILES)): Depend upon stamp-picdir.
4139 (disassemble.o): Build twice if PICFLAG is set.
4140 (MOSTLYCLEAN): Add pic/*.o.
4141 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4142 (distclean): Remove pic and stamp-picdir.
4143 (install): Install shared libraries.
4144 (stamp-picdir): New target.
4146 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4148 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4149 Print unknown instruction as "unknown", rather than in hex.
4151 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4153 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4155 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4157 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4159 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4161 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4162 when necessary. From Ulrich Drepper
4163 <drepper@myware.rz.uni-karlsruhe.de>.
4165 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4167 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4168 sparc_num_opcodes. Update architecture enum values.
4169 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4170 (sparc_opcode_lookup_arch): New function.
4171 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4172 (sparc_opcodes): Add v9a shutdown insn.
4174 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4176 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4177 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4179 (print_insn_sparc64): Deleted.
4180 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4183 * sparc-opc.c (architecture_pname): Add v9a.
4185 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4187 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4188 incorrectly defined as 0x16 when it should be 0x15.
4189 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4190 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4191 excb (exception barrier) which is defined in the Alpha
4192 Architecture Handbook version 2.
4193 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4194 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4195 disassembled as or, for example.
4197 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4199 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4200 (_print_insn_mips): Change i from int to unsigned int.
4202 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4204 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4205 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4207 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4209 * i386-dis.c: Added Pentium Pro instructions.
4211 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4213 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4216 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4218 * sh-opc.h (sh_nibble_type): Added REG_B.
4219 (sh_arg_type): Added A_REG_B.
4220 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4222 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4224 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4226 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4228 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4230 * Makefile.in (distclean): Remove stamp-h. From Ronald
4231 F. Guilmette <rfg@monkeys.com>.
4233 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4235 From David Mosberger-Tang <davidm@azstarnet.com>:
4236 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4239 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4241 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4242 (sh_table): Added many SH3 opcodes.
4243 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4245 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4247 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4248 (subco,subco.): Mark this PPC, not PPCCOM.
4250 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4252 * configure: Rebuild with autoconf 2.7.
4254 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4256 * configure: Rebuild with autoconf 2.6.
4258 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4260 * configure.in: Sort list of architectures. Accept but do nothing
4261 for alliant, convex, pyramid, romp, and tahoe.
4263 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4265 * a29k-dis.c (print_special): Change num to unsigned int.
4267 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4269 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4272 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4274 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4275 * configure: Rebuilt.
4277 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4279 * configure.in: Add case for bfd_i860_arch.
4280 * configure: Rebuild.
4282 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4284 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4285 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4286 (NEXTDOUBLE): Likewise.
4287 (print_insn_m68k): Don't match fmoveml if there is more than one
4288 register in the list.
4289 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4291 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4293 * m68k-opc.c: Use #W rather than #w.
4294 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4296 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4298 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4299 and likewise for all the dbxx opcodes.
4301 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4303 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4305 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4307 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4308 the VR4100 specific instructions to the mips_opcodes structure.
4310 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4312 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4313 ugly Metrowerks bug in CW6, is fixed in CW7.
4315 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4317 * ppc-opc.c (whole file): Add flags for common/any support.
4319 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4321 * Makefile.in (BISON): Remove macro.
4322 (FLAGS_TO_PASS): Remove BISON.
4324 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4326 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4328 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4329 instructions that take no args by looking at the match mask.
4330 (print_insn_arg): Always print "%" before register names.
4331 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4332 [case '_']: Don't print "@#" before address.
4333 [case 'J']: Use "%s" as format string, not register name.
4334 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4336 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4338 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4341 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4343 From David Mosberger-Tang <davidm@azstarnet.com>
4345 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4346 (alpha_insn_set): added definitions for VAX floating point
4347 instructions (Unix compilers don't generate these, but handcoded
4348 assembly might still use them).
4350 * alpha-dis.c (print_insn_alpha): added support for disassembling
4351 the miscellaneous instructions in the Alpha instruction set.
4353 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4355 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4356 no longer create sysdep.h, sed ppc-opc.c to work around a
4357 serious Metrowerks C bug.
4358 * mpw-make.in: Remove.
4359 * mpw-make.sed: New file, used by mpw-configure to edit
4360 Makefile.in into an MPW makefile.
4362 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4364 * Makefile.in (maintainer-clean): New synonym for realclean.
4366 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4368 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4369 which use '0', '1', and '2' instead. Specify the proper size for
4370 a pmove immediate operand. Correct the pmovefd patterns to be
4371 moves to a register, not from a register.
4372 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4374 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4376 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4377 %psr, %wim, %tbr as F_NOTV9.
4379 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4381 * Makefile.in (Makefile): Just rebuild Makefile when running
4383 (config.h, stamp-h): New targets.
4384 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4385 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4386 rebuilding config.h.
4387 * configure: Rebuild.
4389 * mips-opc.c: Change unaligned loads and stores with "t,A"
4390 operands to use "t,A(b)".
4392 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4394 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4396 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4398 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4399 until 3 instead of until 2.
4401 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4403 * Makefile.in (ALL_CFLAGS): Define.
4404 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4405 (MOSTLYCLEAN): Add config.log.
4406 (distclean): Don't remove config.log.
4407 * configure.in: Substitute HDEFINES.
4408 * configure: Rebuild.
4410 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4412 * sh-opc.h (sh_arg_type): Add F_FR0.
4413 (sh_table, case fmac): Add F_FR0 as first argument.
4415 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4417 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4419 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4421 * sparc-dis.c: Remove all references to NO_V9.
4423 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4425 * aclocal.m4: Just include ../bfd/aclocal.m4.
4426 * configure: Rebuild.
4428 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4430 * sparc-dis.c (X_DISP19): Define.
4431 (print_insn, case 'G'): Use it.
4432 (print_insn, case 'L'): Sign extend displacement.
4434 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4436 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4437 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4438 host_makefile_frag or frags.
4439 * aclocal.m4: New file.
4440 * configure: Rebuild.
4441 * Makefile.in (INSTALL): Set to @INSTALL@.
4442 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4443 (INSTALL_DATA): Set to @INSTALL_DATA@.
4445 (AR_FLAGS): Set to rc rather than qc.
4446 (CC): Define as @CC@.
4447 (CFLAGS): Set to @CFLAGS@.
4448 (@host_makefile_frag@): Remove.
4449 (config.status): Remove dependency upon @frags@.
4451 * configure.in: ../bfd/config.bfd now just sets shell variables.
4452 Use them rather than looking through target Makefile fragments.
4453 * configure: Rebuild.
4455 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4457 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4459 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4461 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4462 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4465 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4466 (lookup_{name,value}): New functions.
4467 (prefetch_table): New static local.
4468 (sparc_{encode,decode}_prefetch): New functions.
4469 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4471 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4473 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4476 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4478 * sh-dis.c: Correct comment on first line of file.
4480 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4482 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4484 * sparc-opc.c (asi, membar): New static locals.
4485 (sparc_{encode,decode}_{asi,membar}): New functions.
4486 (sparc_opcodes, membar insn): Fix.
4487 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4488 Support decoding of membar masks.
4491 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4493 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4495 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4497 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4498 and likewise for the other branches. Add bhs as an alias for bcc,
4499 and likewise for the size variants. Add dbhs as an alias for
4502 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4504 * sh-opc.h (FP sts instructions): Update to match reality.
4506 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4508 * m68k-dis.c: (fpcr_names): Add % before all register names.
4509 (reg_names): Likewise.
4510 (print_insn_arg): Don't explicitly print % before register names.
4511 Add % before register names in static array names. In case 'r',
4512 print data registers as `@(Dn)', not `Dn@'. When printing a
4513 memory address, don't print @# before it.
4514 (print_indexed): Change base_disp and outer_disp from int to
4515 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4516 syntax. Sign extend 8 byte displacement correctly.
4517 (print_base): Print using MIT syntax. Print zpc when appropriate.
4518 Change parameter disp from int to bfd_vma.
4520 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4523 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4525 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4526 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4527 * sh-opc.h (sh_arg_type): Add new operand types.
4528 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4530 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4532 * Makefile.in (distclean): Remove generated file config.h.
4534 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4536 * Makefile.in (distclean): Remove generated file config.h.
4538 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4540 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4542 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4544 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4545 rather than numopcodes. Use m68k_opcodes rather than removed
4546 opcode function. Don't check F_ALIAS.
4547 (print_insn_arg): Change first parameter to be const char *.
4548 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4549 (m68k-opc.o): New target.
4550 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4551 * configure: Rebuild.
4553 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4555 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4556 (opcode_bits, opcode_hash_table): New variables.
4557 (opcodes_initialized): Renamed from opcodes_sorted.
4558 (build_hash_table): New function.
4559 (is_delayed_branch): Use hash table.
4560 (print_insn): Renamed from print_insn_sparc, made static.
4561 Build and use hash table. If !sparc64, ignore sparc64 insns,
4562 and vice-versa if sparc64.
4563 (print_insn_sparc, print_insn_sparc64): New functions.
4564 (compare_opcodes): Move sparc64 opcodes to end.
4565 Print commutative insns with constant second.
4566 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4568 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4570 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4571 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4572 avoids printing a delay slot in a delay slot.
4573 * sh-opc.h (sh_table): Fully bracket last entry.
4575 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4577 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4579 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4581 * configure.in: Get host_makefile_frag from ${srcdir}.
4583 * configure.in: Autoconfiscated. Check for string[s].h. Create
4584 config.h from config.in. Don't set up sysdep.h link.
4585 * sysdep.h: New file.
4586 * configure, config.in: New files, generated from configure.in.
4587 * Makefile.in: Updated to be processed autoconf-style.
4588 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4589 (Makefile): Depend on config.status.
4590 (config.status): New rule.
4591 * configure.bat: Update Makefile substitutions.
4593 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4595 * mips-opc.c (L1): Define.
4596 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4597 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4600 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4602 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4603 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4604 have multiple add units but only a single logical unit.
4606 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4607 shifted by 18, without any insertion or extraction function.
4608 (insert_cr, extract_cr): Remove.
4610 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4612 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4615 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4617 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4618 * sh-opc.h: Add copyright.
4620 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4622 * Makefile.in (crunch-m68k): Delete extra target accidentally
4623 checked in a while ago.
4625 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4627 * sh-opc.h (sh_table): Add SH3 support.
4629 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4631 * sh-opc.h: Added bsrf and braf.
4633 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4635 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4636 bogus [ls]fm{ea,fd} patterns.
4638 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4639 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4640 initialize it from memory. Make function static.
4641 (print_insn_{big,little}_arm): New functions.
4642 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4643 the correct endianness.
4645 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4647 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4650 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4652 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4653 17th, so that it builds again using GCC as the compiler.
4655 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4657 * mips-dis.c (print_insn_little_mips): Cast return value from
4658 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4659 expects an unsigned long, and that might be fewer words of
4660 argument storage (e.g., if bfd_vma is long long on a 32-bit
4662 (print_insn_big_mips): Likewise with bfd_getb32 value.
4663 (_print_insn_mips): Now static.
4665 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4667 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4668 gcc memory hog problem with initializer is fixed.
4670 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4672 Merge in support for Mac MPW as a host.
4673 (Old change descriptions retained for informational value.)
4675 * mpw-config.in (archname): Compute from the config.
4676 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4678 * mpw-config.in (target_arch): Compute from canonical target.
4679 (m68k, mips, powerpc, sparc): Add architectures.
4680 * mpw-make.in (disassemble.c.o): Add.
4681 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4683 * mpw-config.in (BFD_MACHINES): Set to a default value.
4684 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4686 * mpw-make.in (CSEARCH): Add extra-include to search path.
4688 * mpw-config.in (varargs.h): Don't create.
4689 (sysdep.h): Create using forward-include.
4690 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4692 * mpw-config.in: New file, MPW version of configure.in.
4693 * mpw-make.in: New file, MPW version of Makefile.in.
4695 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4697 * alpha-dis.c (print_insn_alpha): Put empty statement after
4700 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4702 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4703 (low_sign_extend): Likewise.
4704 (get_field): Delete unused function.
4705 (set_field, deposit_14, deposit_21): Likewise.
4707 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4709 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4712 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4714 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4716 * alpha-opc.h (OSF_ASMCODE): define
4717 print pal-code names as defined in App C of the
4718 Alpha Architecture Reference Manual
4720 * alpha-dis.c: cleaned up output
4721 print stylized code forms as defined in App A.4.3 of the
4722 Alpha Architecture Reference Manual
4724 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4726 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4728 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4731 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4733 * m68k-dis.c (opcode): New function. Returns address of opcode
4734 table entry given index, even if the opcode table was split to
4735 work around gcc bugs.
4736 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4738 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4739 (reg_names): Now const.
4740 (print_insn_arg): Arrays cacheFieldName and names now const.
4741 (print_indexed): Array scales now const.
4743 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4745 * ppc-opc.c: Sort recently added instructions by minor opcode
4746 number within major opcode number.
4748 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4750 * hppa-dis.c: Include libhppa.h.
4752 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4754 * mips-opc.c: Change dli to use M_DLI, and add dla.
4756 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4758 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4760 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4762 * mips-opc.c: Add r4650 mul instruction.
4764 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4766 * mips-opc.c: Add uld and usd macros for unaligned double load and
4769 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4771 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4772 mfdcr, mtdcr, icbt, iccci.
4774 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4776 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4777 signed char fields to shorts, more portable.
4779 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4781 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4782 char fields as signed chars, since they may have negative values.
4784 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4786 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4787 (mycroft@netbsd.org).
4789 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4791 From "Logg, Ed" <elogg@ea.com>:
4792 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4793 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4796 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4798 * ppc-opc.c: Changes based on patch from David Edelsohn
4799 <edelsohn@mhpcc.edu>.
4800 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4803 (insert_tbr): New static function.
4804 (extract_tbr): New static function.
4805 (XFXFXM_MASK, XFXM): Define.
4806 (XSPRBAT_MASK, XSPRG_MASK): Define.
4807 (powerpc_opcodes): Add instructions to access special registers by
4808 name. Add mtcr and mftbu.
4810 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4812 * mips-opc.c (P3): Define.
4813 (mips_opcodes): Add mad and madu.
4815 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4817 * configure.in: Add W65 support.
4818 * disassemble.c: Likewise.
4819 * w65-opc.h, w65-dis.c: New files.
4821 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4823 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4826 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4828 * mips-opc.c: Add dli as a synonym for li.
4830 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4832 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4833 print something for reserved opcode values, even if it won't
4836 * mips-dis.c (_print_insn_mips): When initializing, shift right
4837 and mask, to avoid sign extension problems on the Alpha.
4839 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4842 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4844 * sh-opc.h (mov.l gbr): Get direction right.
4845 * sh-dis.c (print_insn_shx): New function.
4846 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4847 print opcodes with right byte order.
4849 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4851 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4852 to avoid conflicts with getopt.
4854 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4856 * hppa-dis.c (print_insn_hppa): Read the instruction using
4857 bfd_getb32, so that it works on a little endian or 64 bit host.
4858 Remove unused local variable op.
4860 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4862 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4863 addu does not work correctly if -mips3.
4865 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4867 * a29k-dis.c (print_special): Add special register names defined
4868 on 29030, 29040 and 29050.
4869 (print_insn): Handle new operand type 'I'.
4871 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4873 * Makefile.in (INSTALL): Use top level install.sh script.
4875 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4877 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4878 that it works on a little endian host.
4880 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4882 * configure.in: Use ${config_shell} when running config.bfd.
4884 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4886 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4888 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4890 * a29k-dis.c (print_insn): Print the opcode.
4892 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4894 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4896 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4898 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4900 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4902 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4903 which store a value into memory.
4905 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4907 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4908 * arm-dis.c, arm-opc.h: New files.
4910 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4912 * Makefile.in (ns32k-dis.o): Add dependency.
4913 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4914 string, not as array of chars.
4916 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4918 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4920 * sparc-opc.c: Added sparclite extended FP operations, and
4921 versions of v9 impdep* instructions permitting specification of
4924 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4926 * i960-dis.c (reg_names): Now const.
4927 (struct sparse_tabent): New type, copied from array type in mem
4929 (ctrl): Local static array ctrl_tab now const.
4930 (cobr): Local static array cobr_tab now const.
4931 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4932 static variable mem_tab no longer explicitly initialized. Changed
4933 mem_init to const array of struct sparse_tabent.
4934 (reg): Local static variable reg_tab no longer explicitly
4935 initialized. Changed reg_init to const array of struct
4937 (ea): Local static array scale_tab now const.
4939 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4942 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4944 * configure.bat: the disassember needs to be enabled for
4945 "objdump -d" to work in djgpp.
4947 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4949 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4950 (invalid_float): Enabled general version, doesn't require running
4951 on ns32k host. Changed to take char* argument, and test for
4952 explicitly specified sizes, instead of using sizeof() on host CPU
4954 (INVALID_FLOAT): Cast first argument.
4955 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4956 list_P032, list_M032): Now const.
4957 (optlist, list_search): Made appropriate arguments now point to
4959 (print_insn_arg): Changed static array of one-character-string
4960 pointers into a static const array of characters; fixed sprintf
4961 statement accordingly.
4963 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4965 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4966 from distribution. A ns32k-dis.c from a previous distribution has
4967 been brought up to date and supports the new interface.
4969 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4971 * configure.in: add bfd_ns32k_arch target support.
4973 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4974 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4976 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4978 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4981 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4983 * h8300-dis.c, mips-dis.c: Don't use true and false.
4985 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4987 * configure.in: Change --with-targets to --enable-targets.
4989 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4991 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4992 opcodes to the first instruction with that opcode, to speed
4993 disassembly of large files. From ralphc@pyramid.com (Ralph
4996 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4998 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5000 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5002 * configure.bat: update to latest makefile.in
5004 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5006 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5007 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5008 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5009 slot insn is in a delay slot.
5010 * z8k-opc.h: (resflg): Fix patterns.
5011 * h8500-opc.h Fix CR insn patterns.
5013 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5015 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5016 "cmpl" before POWER versions, so that gas -many uses them.
5018 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5020 * disassemble.c: New file.
5021 * Makefile.in (OFILES): Add disassemble.o.
5022 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5023 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5024 binutils/configure.in.
5026 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5027 opcode being examined.
5029 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5031 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5032 (insert_ral, insert_ram, insert_ras): New functions.
5033 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5034 RAS for store with update.
5036 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5038 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5039 (edelsohn@npac.syr.edu).
5041 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5043 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5046 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5048 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5050 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5052 * ppc-opc.c (powerpc_operands): The signedp field has been
5053 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5054 instead. Add new operand SISIGNOPT.
5055 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5056 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5057 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5060 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5062 * i386-dis.c (struct private): Renamed to dis_private. `private'
5063 is a reserved word for dynix cc.
5065 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * configure.in: Change error message to refer to bfd/config.bfd
5068 rather than bfd/configure.in.
5070 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5072 * ppc-opc.c: Define POWER2 as short alias flag.
5073 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5076 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5078 * i960-dis.c (print_insn_i960): Don't read a second word for
5079 opcodes 0, 1, 2 and 3.
5081 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5083 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5085 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5087 * m68881-ext.c: Removed; no longer used.
5088 * Makefile.in: Changed accordingly.
5090 * m68k-dis.c (ext_format_68881): Don't declare.
5091 (print_insn_m68k): If an instruction uses place 'i', it uses at
5092 least four fixed bytes.
5093 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5094 extended float, convert to double using floatformat_to_double, not
5095 ieee_extended_to_double, and fetch the data before converting it.
5097 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5100 davidj@ICSI.Berkeley.EDU (David Johnson).
5102 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5104 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5105 PowerPC uses bdnz[l][a].
5107 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5109 * dis-buf.c, i386-dis.c: Include sysdep.h.
5111 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5113 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5115 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5116 by Motorola PowerPC 601 with PPC_OPCODE_601.
5117 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5118 Disassemble Motorola PowerPC 601 instructions as well as normal
5119 PowerPC instructions.
5121 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5123 * i960-dis.c (reg, mem): Just use a static array instead of
5126 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5128 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5129 condition name index if this is for a negated condition.
5131 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5132 Floating point format for 'H' operand is backwards from normal
5133 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5134 operands (fmpyadd and fmpysub), handle bizarre register
5135 translation correctly for single precision format.
5137 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5138 or 'I' operands if the next format specifier is 'M' (fcmp
5139 condition completer).
5141 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5143 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5144 single number giving a bitmask for the MB and ME fields of an M
5145 form instruction. Change NB to accept 32, and turn it into 0;
5146 also turn 0 into 32 when disassembling. Seperated SH from NB.
5147 (insert_mbe, extract_mbe): New functions.
5148 (insert_nb, extract_nb): New functions.
5149 (SC_MASK): Mask out SA and LK bits.
5150 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5151 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5152 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5153 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5154 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5155 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5156 (powerpc_macros): Define table of macro definitions.
5157 (powerpc_num_macros): Define.
5159 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5160 if PPC_OPERAND_NEXT is set.
5162 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5164 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5165 char. Retrieve contents using bfd_getl32 instead of shifting.
5167 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5169 * ppc-opc.c: New file. Opcode table for PowerPC, including
5170 opcodes for POWER (RS/6000).
5171 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5172 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5173 (CFILES): Add ppc-dis.c.
5174 (ppc-dis.o, ppc-opc.o): New targets.
5175 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5177 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5179 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5180 No space before 'u', 'f', or 'N'.
5182 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5184 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5185 farther than we should.
5187 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5189 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5191 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5193 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5195 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5196 needs it, to prevent reading past the end of a section.
5198 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5200 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5201 Removed t,A case for la; always use t,A(b) case.
5203 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5205 From Ted Lemen <mellon@pepper.ncd.com>
5206 * mips-dis.c (print_insn_arg): Handle 'k'.
5207 * mips-opc.c: Make cache use k, not t.
5209 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5211 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5212 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5213 FLOAT_FORMAT_CODE to put out floating point register names.
5215 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5217 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5219 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5221 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5223 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5225 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5226 larger than 32. Moved dsxx32 variants first for disassembler.
5228 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5230 * z8kgen.c, z8k-opc.h: Add full lda information.
5232 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5234 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5235 movb instructions. Any necessary space will be emitted by
5236 the code to handle nullification completers.
5238 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5240 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5242 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5244 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5245 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5247 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5249 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5251 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5253 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5254 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5256 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5258 * m88k-dis.c (m88kdis): comment change. Remove space after
5260 (printop): handle new arg types DEC and XREG for m88110.
5262 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5264 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5265 type for absolute branch addresses. Delete special
5266 "ble" and "be" code in 'W' operand code.
5268 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5270 * mips-opc.c: Set hazard information correctly for branch
5271 likely instructions.
5273 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5275 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5276 info->fprintf_func for printing and info->print_address_func for
5279 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5281 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5283 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5285 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5286 Corrected second case of "b" for disassembler.
5288 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5290 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5291 to BFD swapping routines to correspond to BFD name changes.
5293 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5295 * mips-opc.c: Change div machine instruction to be z,s,t rather
5296 than s,t. Change div macro to be d,v,t rather than d,s,t.
5297 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5298 rem and remu which generates only the corresponding div
5299 instruction. This is for compatibility with the MIPS assembler,
5300 which only generates the simple machine instruction when an
5301 explicit destination of $0 is used.
5302 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5304 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5306 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5307 WR_31 hazard for bal, bgezal, bltzal.
5309 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5311 * hppa-dis.c (print_insn_hppa): Use print function
5312 from within the disassemble_info, not fprintf_filtered.
5314 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5316 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5317 Law, law@cs.utah.edu.)
5319 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5321 * mips-opc.c ("absu"): Removed.
5324 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5326 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5327 Changed hazard information to distinguish between memory load
5328 delays and coprocessor load delays.
5330 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5332 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5334 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5336 * configure.in: Don't pass cpu to config.bfd.
5338 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5340 * m88k-dis.c (m88kdis): Make class unsigned.
5342 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5344 * alpha-dis.c (print_insn_alpha): One branch format case was
5345 missing the instruction name.
5347 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5349 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5350 Add the arch-specific auxiliary files.
5351 (OFILES): Remove the arch-specific auxiliary files
5352 and use BFD_MACHINES instead of DIS_LIBS.
5353 * configure.in: Set BFD_MACHINES based on --with-targets option.
5355 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5357 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5360 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5362 * sparc-opc.c: Change CONST to const to deal with gcc
5363 -Dconst=__const -traditional.
5365 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5367 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5368 coprocessor instructions out of #if 0, and made them use new
5371 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5373 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5375 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5377 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5378 instruction, for use by the disassembler.
5380 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5381 hand-coded sign extensions that depended on 32-bit host ints.
5382 FIXME, we still depend on big-endian host bitfield ordering.
5383 (sparc_print_insn): Set the insn_info_valid field, and the
5384 other fields that describe the instruction being printed.
5386 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5388 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5389 `jmp' instead of just one of them.
5391 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5393 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5394 (fput_fp_reg_r): Renamed from fput_reg_r.
5395 (fput_fp_reg): New function.
5396 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5398 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5400 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5402 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5404 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5406 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5407 don't output a space.
5409 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5411 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5413 * mips-opc.c: New file, containing opcode table from
5414 ../include/opcode/mips.h.
5415 * Makefile.in: Add it.
5417 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5419 * m88k-dis.c: New file, moved in from gdb and changed to use the
5420 new dis-asm.h disassembler interface.
5421 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5422 (m88k-dis.o): New target.
5424 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5426 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5427 argument string const char * to correspond to opcode/mips.h.
5429 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5431 * mips-dis.c: Updated to account for name changes in new version
5433 * Makefile.in: Added header file dependencies.
5435 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5437 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5439 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5441 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5442 extend, rather than shifts.
5444 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5446 * Makefile.in: Undo 15 June change.
5448 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5450 * m68k-dis.c (print_insn_arg): Change return value to byte count
5452 * m68k-dis.c: Re-write to detect invalid operands before
5453 printing anything, so we can handle this the same way we
5454 handle invalid opcodes.
5456 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5458 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5460 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5462 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5465 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5467 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5469 * configure.in: Do make sysdep.h link.
5470 * Makefile.in: Search ../include. Don't search ../bfd.
5472 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5474 Changes from Jeff Law, law@cs.utah.edu:
5475 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5476 Do not print a space before the completers specified by
5479 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5481 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5482 defined, since gdb has been fixed.
5484 Changes from Jeff Law, law@cs.utah.edu:
5485 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5486 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5487 be a *disassemble_info, not a *FILE.
5488 * hppa-dis.c: Support 'd', '!', and 'a'.
5489 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5490 * hppa-dis.c: Delete cases which are no longer needed.
5492 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5494 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5496 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5498 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5501 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5503 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5504 * configure.in: No longer need to configure to get sysdep.h.
5506 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5508 * Patches from Jeffrey Law <law@cs.utah.edu>.
5509 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5510 templates for 1.1 FP computational instructions.
5512 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5514 * h8500-dis.c (print_insn_h8500): Address argument is type
5516 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5519 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5520 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5522 * sparc-dis.c (compare_opcodes): Move static declaration to
5525 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5527 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5528 instruction, remove unimp hack from 'l' argument.
5530 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5532 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5535 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5537 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5538 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5541 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5543 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5544 arrays of string pointers to 2-d arrays of chars, to save
5547 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5549 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5550 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5552 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5554 * hppa-dis.c: New file from Utah, adapted to new disassembler
5556 * Makefile.in: Include it.
5558 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5560 * sh-dis.c, sh-opc.h: New files.
5562 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5564 * alpha-dis.c, alpha-opc.h: New files.
5566 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5568 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5571 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5573 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5575 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5577 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5580 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5582 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5583 and double percent signs a few places.
5585 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5587 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5588 Use info->print_address_func not print_address.
5590 * dis-buf.c (generic_print_address): New function.
5592 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5594 * Makefile.in: Add sparc-dis.c.
5595 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5597 Add `add' instruction to the set that get checked
5598 for a preceding `sethi' in order to print an absolute address.
5599 * (print_insn): Disassembly prefers real instructions.
5600 (is_delayed_branch): Speed up.
5601 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5602 Still missing some float ops, and needs testing.
5603 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5604 F_ALIAS. Use printf, not fprintf, when not passing a file
5606 (compare_opcodes): Check that identical instructions have
5607 identical opcodes, complain otherwise.
5610 * Include reg_names.
5612 Use dis-asm.h/read_memory_func interface.
5614 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5616 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5617 deliberately return non-zero to setjmp from longjmp. Otherwise
5618 this code fails to compile.
5620 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5622 * m68k-dis.c: Fix prototype for fetch_arg().
5624 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5626 * dis-buf.c: New file, for new read_memory_func interface.
5627 Makefile.in (OFILES): Include it.
5628 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5629 Use new read_memory_func interface.
5631 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5633 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5634 * h8500-opc.h: Fix couple of opcodes.
5636 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5638 * Makefile.in: add dvi & installcheck targets
5640 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5642 * Makefile.in: Update for h8500-dis.c.
5644 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5646 * h8500-dis.c, h8500-opc.h: New files
5648 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5650 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5651 ../include/dis-asm.h.
5652 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5653 and ../gdb/m68k-pinsn.c).
5654 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5655 and ../gdb/i386-pinsn.c).
5656 * m68881-ext.c: New file. Moved definition of
5657 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5658 * Makefile.in: Adjust for new files.
5659 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5660 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5661 can be dis-assembled.
5663 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5665 * mips-dis.c (print_insn_arg): Now returns void.
5667 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5669 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5670 files that use the macros.
5672 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5674 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5675 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5676 (CFILES): Added mips-dis.c.
5678 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5680 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5681 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5683 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5685 * Makefile.in: Improve *clean rules.
5686 * configure.in: Allow a default host.
5688 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5690 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5691 files include other sysdep files
5693 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5695 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5697 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5699 * configure.in: For host support, use ../bfd/configure.host
5700 so it stays in sync with the ../bfd/hosts database.
5702 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5704 * configure.in: use cpu-vendor-os triple instead of nested cases
5706 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5708 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5709 *always* the wrong one.
5711 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5713 * z8kgen.c: added copyright info
5715 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5717 * z8k-dis.c (unparse_instr): prettier tabs
5718 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5720 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5722 * configure.in: Add ncr* configuration.
5723 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5724 picayune ANSI compilers happy.
5726 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5728 * configure.in (i386): Make i386 and i486 synonymous for now.
5729 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5731 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5733 * Makefile.in (install): Fix typo.
5735 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5737 * Makefile.in (make): Remove obsolete crud.
5738 (sparc-opc.o): Avoid Sun Make VPATH bug.
5740 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5742 * Makefile.in: since there are no SUBDIRS, remove rule and
5743 references of subdir_do.
5745 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5747 * Makefile.in (install): Get the library name right here too.
5748 Don't install bfd.h, since it's unrelated to this library. No
5749 subdirs to recurse into, either.
5750 (CFILES): The source file has a .c suffix, not .o.
5752 * sparc-opc.c: New file, moved from BFD.
5753 * Makefile.in (OFILES): Build it.
5755 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5757 * z8k-dis.c: fixed forward refferences of some declarations.
5759 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5761 * Makefile.in: get the name of the library right
5763 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5765 * z8k-dis.c: knows how to disassemble z8k stuff
5766 * z8k-opc.h: new file full of z8000 opcodes
5770 version-control: never