1 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
3 * fr30-asm.c: Regenerate.
4 * fr30-desc.c: Regenerate.
5 * fr30-dis.c: Regenerate.
6 * m32r-asm.c: Regenerate.
7 * m32r-desc.c: Regenerate.
8 * m32r-dis.c: Regenerate.
9 * openrisc-asm.c: Regenerate.
10 * openrisc-desc.c: Regenerate.
11 * openrisc-dis.c: Regenerate.
12 * xstormy16-asm.c: Regenerate.
13 * xstormy16-desc.c: Regenerate.
14 * xstormy16-dis.c: Regenerate.
16 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
18 * mips-dis.c (is_newabi): EABI is not a NewABI.
20 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
22 * configure.in (shle-*-*elf*): Include sh64 support.
23 * configure: Regenerate.
25 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
27 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
28 (print_insn_mode): Print some basic info about floating point values.
30 2002-05-09 Anton Blanchard <anton@samba.org>
32 * ppc-opc.c: Add "tlbiel" for POWER4.
34 2002-05-07 Graydon Hoare <graydon@redhat.com>
36 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
37 than just most-recently-opened.
39 2002-05-01 Alan Modra <amodra@bigpond.net.au>
41 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
43 2002-04-24 Christian Groessler <chris@groessler.org>
45 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
46 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
48 (z8k_lookup_instr): CLASS_IGNORE case added.
49 (output_instr): Don't print hex codes, they are already
51 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
52 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
53 (unparse_instr): Fix base and indexed addressing disassembly:
54 The index is inside the brackets.
55 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
56 (opt): Fix shift left/right arithmetic/logical byte defines:
57 The high byte of the immediate word is ignored by the
59 Fix n parameter of ldm opcodes: The opcode contains (n-1).
60 (args): Fix "n" entry.
61 (toks): Add "nim4" and "iiii" entries.
62 * z8k-opc.h: Regenerated with new z8kgen.c.
64 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
66 * po/id.po: New Indonesian translation.
67 * configure.in (ALL_LIGUAS): Add id.po
68 * configure: Regenerate.
70 2002-04-17 matthew green <mrg@redhat.com>
72 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
74 2002-04-04 Alan Modra <amodra@bigpond.net.au>
76 * dep-in.sed: Cope with absolute paths.
77 * Makefile.am (dep.sed): Subst TOPDIR.
79 * Makefile.in: Regenerate.
80 * ppc-opc.c: Whitespace.
81 * s390-dis.c: Fix copyright date.
83 2002-03-23 matthew green <mrg@redhat.com>
85 * ppc-opc.c (vmaddfp): Fix operand order.
87 2002-03-21 Alan Modra <amodra@bigpond.net.au>
89 * Makefile.am: Run "make dep-am".
90 * Makefile.in: Regenerate.
92 2002-03-21 Anton Blanchard <anton@samba.org>
94 * ppc-opc.c: Add optional field to mtmsrd.
95 (MTMSRD_L, XRLARB_MASK): Define.
97 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
99 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
101 (print_insn) Likewise.
102 (putop): Fix handling of 'E'
103 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
106 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
108 * po/fr.po: Updated version.
110 2002-03-16 Chris Demetriou <cgd@broadcom.com>
112 * mips-opc.c (M3D): Tweak comment.
113 (mips_builtin_op): Add comment indicating that opcodes of the
114 same name must be placed together in the table, and sort
115 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
116 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
118 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
120 * Makefile.am: Tidy up sh64 rules.
121 * Makefile.in: Regenerate.
123 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
125 * mips-dis.c: Update copyright years.
127 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
129 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
130 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
131 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
132 indicate that they should dissassemble all applicable
134 * mips-opc.c: Add support for MIPS-3D instructions.
135 (M3D): New definition.
137 * mips-opc.c: Update copyright years.
139 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
141 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
143 2002-03-15 Chris Demetriou <cgd@broadcom.com>
145 * mips-dis.c (is_newabi): Fix ABI decoding.
147 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
149 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
150 and bfd_mach_mipsisa64 cases to match the rest.
152 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
154 * po/fr.po: Updated version.
156 2002-03-13 Alan Modra <amodra@bigpond.net.au>
158 * ppc-opc.c: Add optional `L' field to tlbie.
159 (XRTLRA_MASK): Define.
161 2002-03-06 Chris Demetriou <cgd@broadcom.com>
163 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
166 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
168 2002-03-05 Paul Koning <pkoning@equallogic.com>
170 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
171 for float opcodes that take float operands. Add alternate
172 names (xxxD vs. xxxF) for float opcodes.
173 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
174 (print_foperand): New function to handle float opcode operands.
175 (print_insn_pdp11): Use print_foperand to disassemble float ops.
177 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
181 2002-02-26 Brian Gaeke <brg@dgate.org>
183 * Makefile.am (install-data-local): Install dis-asm.h.
185 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
187 * configure.in (LINGUAS): Add de.po.
188 * configure: Regenerate.
189 * po/de.po: New file.
191 2002-02-25 Alan Modra <amodra@bigpond.net.au>
193 * ppc-dis.c (powerpc_dialect): Handle power4 option.
194 * ppc-opc.c (insert_bdm): Correct description of "at" branch
195 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
196 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
197 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
198 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
199 (PPCCOM32, PPCCOM64): Delete.
200 (NOPOWER4, POWER4): Define.
201 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
202 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
203 are enabled for power4 rather than ppc64.
205 2002-02-20 Tom Rix <trix@redhat.com>
207 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
209 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
211 * s390-dis.c (init_disasm): Use renamed architecture defines.
213 2002-02-19 matthew green <mrg@redhat.com>
215 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
218 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
220 * po/tr.po: Updated translation.
222 2002-02-15 Richard Henderson <rth@redhat.com>
224 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
227 2002-02-15 Richard Henderson <rth@redhat.com>
229 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
232 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
234 * po/da.po: Updated translation.
236 2002-02-12 Graydon Hoare <graydon@redhat.com>
238 * cgen-asm.in (parse_insn_normal): Change call from
239 @arch@_cgen_parse_operand to cd->parse_operand, to
240 facilitate CGEN_ASM_INIT_HOOK doing useful work.
242 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
244 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
247 2002-02-11 Alan Modra <amodra@bigpond.net.au>
249 * Makefile.am: "make dep-am".
250 * Makefile.in: Regenerate.
251 * aclocal.m4: Regenerate.
252 * config.in: Regenerate.
253 * configure: Regenerate.
255 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
257 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
258 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
260 * configure: Regenerate.
262 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
264 * cgen-dis.c: Add prototypes for count_decodable_bits
265 and add_insn_to_hash_chain.
267 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
269 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
270 * configure: Rebuilt.
272 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
274 * or32-opc.c: Fix compile time warning messages.
275 * or32-dis.c: Fix compile time warning messages.
277 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
280 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
281 * sh64-opc.c: Regenerate.
282 2001-03-13 DJ Delorie <dj@redhat.com>
283 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
284 purpose is more obvious.
285 * sh64-opc.c (shmedia_table): Ditto.
286 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
287 (print_insn_shmedia): Ditto.
288 2001-03-12 DJ Delorie <dj@redhat.com>
289 * sh64-opc.c: Adjust comments to reflect reality: replace bits
290 3:0 with zeros (not "reserved"), replace "rrrrrr" with
291 "gggggg" for two-operand floating point opcodes. Remove
293 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
294 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
295 Correct printing of .byte:s. Return number of printed bytes or
297 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
298 to next four-byte-alignment if insn or data is not aligned.
299 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
300 * sh64-dis.c: Update comments and fix comment formatting.
301 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
302 Abort instead of setting length to 0.
303 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
304 crange_bsearch_cmpl, sh64_get_contents_type,
305 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
306 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
307 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
308 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
309 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
310 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
311 address with same prefix as SHcompact.
312 In the disassembler, use a .cranges section for linked executables.
313 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
314 and update for using structure in info->private_data.
315 (struct sh64_disassemble_info): New.
316 (is_shmedia_p): Delete.
317 (crange_qsort_cmpb): New function.
318 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
319 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
320 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
321 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
322 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
323 pair. Display addresses for linked executables only.
324 (print_insn_sh64x_media): Initialize info->private_data by calling
325 init_sh64_disasm_info.
326 (print_insn_sh64x): Ditto. Find out type of contents by calling
327 sh64_contents_type_disasm. Display data regions using ".long" and
328 ".byte" similar to unrecognized opcodes.
329 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
330 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
331 information in section flags before considering symbols. Don't
332 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
333 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
334 matching $target $canon_targets instead of looking at the
335 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
336 * configure: Regenerate.
337 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
338 * sh64-opc.c (shmedia_creg_table): New.
339 * sh64-opc.h (shmedia_creg_info): New type.
340 (shmedia_creg_table): Declare.
341 * sh64-dis.c (creg_name): New function.
342 (print_insn_shmedia): Use it.
343 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
344 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
345 print_insn_sh64l if little-endian.
346 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
347 (print_insn_sh64l): New.
348 (print_insn_sh64x): New.
349 (print_insn_sh64x_media): New.
350 (print_insn_sh64): Break out code to print_insn_sh64x and
351 print_insn_sh64x_media.
352 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
353 * sh64-opc.h: New file
354 * sh64-opc.c: New file
355 * sh64-dis.c: New file
356 * Makefile.am: Add sh64 targets.
357 (HFILES): Add sh64-opc.h.
358 (CFILES): Add sh64-opc.c and sh64-dis.c.
359 (ALL_MACHINES): Add sh64 files.
360 * Makefile.in: Regenerate.
361 * configure.in: Add support for sh64 to bfd_sh_arch.
362 * configure: Regenerate.
363 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
364 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
366 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
367 * po/POTFILES.in: Regenerate.
368 * po/opcodes.pot: Regenerate.
370 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
372 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
374 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
376 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
378 2002-02-01 Alan Modra <amodra@bigpond.net.au>
380 * Makefile.am: Run "make dep-am"
381 * Makefile.in: Regenerate.
383 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
385 * or32-dis.c: New file.
386 * or32-opc.c: New file.
387 * configure.in: Add support for or32.
388 * configure: Regenerate.
389 * Makefile.am: Add support for or32.
390 * Makefile.in: Regenerate.
391 * disassemble.c: Add support for or32.
392 * po/POTFILES.in: Regenerate.
393 * po/opcodes.pot: Regenerate.
395 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
397 * configure: Regenerated.
399 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
401 * po/fr.po: Updated version.
403 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
405 * po/es.po: Updated version.
407 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
409 * po/da.po: New version.
411 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
413 * po/da.po: New file: Spanish translation.
414 * configure.in (ALL_LINGUAS): Add da.
415 * configure: Regenerate.
417 2002-01-22 Graydon Hoare <graydon@redhat.com>
419 * fr30-asm.c: Regenerate.
420 * fr30-desc.c: Likewise.
421 * fr30-desc.h: Likewise.
422 * fr30-dis.c: Likewise.
423 * fr30-ibld.c: Likewise.
424 * fr30-opc.c: Likewise.
425 * fr30-opc.h: Likewise.
426 * m32r-asm.c: Likewise.
427 * m32r-desc.c: Likewise.
428 * m32r-desc.h: Likewise.
429 * m32r-dis.c: Likewise.
430 * m32r-ibld.c: Likewise.
431 * m32r-opc.c: Likewise.
432 * m32r-opc.h: Likewise.
433 * m32r-opinst.c: Likewise.
434 * openrisc-asm.c: Likewise.
435 * openrisc-desc.c: Likewise.
436 * openrisc-desc.h: Likewise.
437 * openrisc-dis.c: Likewise.
438 * openrisc-ibld.c: Likewise.
439 * openrisc-opc.c: Likewise.
440 * openrisc-opc.h: Likewise.
441 * xstormy16-desc.c: Likewise.
443 2002-01-22 Richard Henderson <rth@redhat.com>
445 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
448 2002-01-22 Alan Modra <amodra@bigpond.net.au>
450 * Makefile.am: Run "make dep-am".
451 * Makefile.in: Regenerate.
452 * opcodes/po/POTFILES.in: Regenerate.
454 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
456 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
457 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
459 2002-01-18 Keith Walker <keith.walker@arm.com>
461 * arm-opc.h (arm_opcodes): Add bxj instruction.
463 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
465 * po/opcodes.pot: Regenerate.
466 * po/fr.po: Regenerate.
467 * po/sv.po: Regenerate.
468 * po/tr.po: Regenerate.
470 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
472 * po/tr.po: Import new version.
474 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
476 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
477 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
480 2002-01-10 matthew green <mrg@redhat.com>
482 * xstormy16-asm.c: Regenerate.
483 * xstormy16-desc.c: Likewise.
484 * xstormy16-desc.h: Likewise.
485 * xstormy16-dis.c: Likewise.
486 * xstormy16-opc.c: Likewise.
487 * xstormy16-opc.h: Likewise.
489 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
491 * po/es.po: New file: Spanish translation.
492 * configure.in (ALL_LINGUAS): Add es.
493 * configure: Regenerate.
495 2001-12-31 Jeffrey A Law (law@redhat.com)
497 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
498 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
499 Always emit a space after 'H'.
501 2001-12-18 matthew green <mrg@redhat.com>
503 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
505 2001-12-17 Richard Henderson <rth@redhat.com>
507 * alpha-opc.c (unop): Encode with RB as $sp.
509 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
511 * Makefile.am: Add support for xstormy16.
512 * Makefile.in: Regenerate.
513 * configure.in: Add support for xstormy16.
514 * configure: Regenerate.
515 * disassemble.c: Add support for xstormy16.
516 * xstormy16-asm.c: New generated file.
517 * xstormy16-desc.c: New generated file.
518 * xstormy16-desc.h: New generated file.
519 * xstormy16-dis.c: New generated file.
520 * xstormy16-ibld.c: New generated file.
521 * xstormy16-opc.c: New generated file.
522 * xstormy16-opc.h: New generated file.
524 2001-12-06 Richard Henderson <rth@redhat.com>
526 * alpha-opc.c (alpha_opcodes): Add wh64en.
528 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
530 * d10v-opc.c (d10v_predefined_registers): Remove warnings
531 introduced in Nov 29's patch.
533 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
536 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
539 * d10v-opc.c (RSRC_NOSP): New macro.
540 (d10v_operands): Add it.
541 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
543 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
545 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
546 (RSRC_SP): New macro.
547 (d10v_operands): Add it.
548 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
550 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
552 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
553 Also, break out of the loop as soon as an instruction has been
556 2001-11-17 matthew green <mrg@redhat.com>
558 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
560 2001-11-15 Alan Modra <amodra@bigpond.net.au>
562 * po/POTFILES.in: Regenerate.
564 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
565 (insert_bat, extract_bat, insert_bba, extract_bba,
566 insert_bd, extract_bd, insert_bdm, extract_bdm,
567 insert_bdp, extract_bdp, valid_bo,
568 insert_bo, extract_bo, insert_boe, extract_boe,
569 insert_ds, extract_ds, insert_de, extract_de,
570 insert_des, extract_des, insert_li, extract_li,
571 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
572 insert_nb, extract_nb, insert_nsi, extract_nsi,
573 insert_ral, insert_ram, insert_ras,
574 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
575 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
576 (extract_bd, extract_bdm, extract_bdp,
577 extract_ds, extract_des,
578 extract_li, extract_nsi): Implement sign extension without conditional.
579 (insert_bdm, extract_bdm,
580 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
581 (extract_bdm, extract_bdp): Correct 32 bit validation.
582 (AT1_MASK, AT2_MASK): Define.
583 (BBOAT_MASK): Define.
584 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
585 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
586 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
587 (PPCCOM32, PPCCOM64): Define.
588 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
589 and add new patterns to implement 64 bit branches with hints. Move
590 booke instructions so they match before ppc64.
592 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
593 64 bit default targets, and parse "32" and "64" in options.
595 (print_insn_powerpc): Pass dialect to operand->extract.
597 2001-11-14 Dave Brolley <brolley@redhat.com>
599 * cgen-dis.c (count_decodable_bits): New function.
600 (add_insn_to_hash_chain): New function.
601 (hash_insn_array): Call add_insn_to_hash_chain.
602 (hash_insn_list): Call add_insn_to_hash_chain.
603 * m32r-dis.c: Regenerated.
604 * fr30-dis.c: Regenerated.
606 2001-11-14 Andreas Jaeger <aj@suse.de>
608 * i386-dis.c (print_insn): Use x86-64 as option.
610 2001-11-14 Alan Modra <amodra@bigpond.net.au>
612 * disassemble.c (disassembler): Call print_insn_i386.
613 * i386-dis.c (SUFFIX_ALWAYS): Define.
614 (struct dis_private): Add orig_sizeflag.
615 (print_insn_i386): Make it a wrapper, calling..
616 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
617 warning without using volatile by moving orig_sizeflag to priv,
618 and removing inbuf. Parse disassembler_options.
619 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
621 (putop): Remove #ifdef SUFFIX_ALWAYS.
623 2001-11-11 Timothy Wall <twall@alum.mit.edu>
625 * tic54x-dis.c: Use revised opcode structure. Export opcode
627 (has_lkaddr): Don't forget about Lmem insns.
628 * tic54x-opc.c: Add emulation trap. Parallel table now uses
629 standard opcode templates.
631 2001-11-13 Zack Weinberg <zack@codesourcery.com>
633 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
634 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
635 category instead of Ew.
637 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
639 * m68k-opc.c: Fix definitions of wddata[bwl].
641 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
643 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
644 fit in the buffer, try to match the empty keyword.
646 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
648 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
649 * fr30-ibld.c: Regenerate.
650 * m32r-ibld.c: Regenerate.
651 * openrisc-ibld.c: Regenerate.
653 2001-11-04 Chris Demetriou <cgd@broadcom.com>
655 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
657 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
659 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
660 * configure: Regernate.
661 * po/fr.po: New file.
662 * po/sv.po: New file.
663 * po/tr.po: New file.
665 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
667 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
670 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
672 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
674 * Makefile.in: Regenerate.
675 * mmix-dis.c, mmix-opc.c: New files.
677 2001-10-29 Kazu Hirata <kazu@hxi.com>
679 * d30v-dis.c: Fix a comment typo.
681 2001-10-23 Chris Demetriou <cgd@broadcom.com>
683 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
684 "bltzall" as writing GPR 31 (since they do).
686 * mips-dis.c (print_insn_arg): Calculate info->target
688 (print_insn_mips): Fill in instruction info.
689 (print_mips16_insn_arg): Remove unneded variable 'val'.
690 Removed duplicated instruction target calculations,
691 calculate once and print that result. Use same idiom for
692 masking the jump segment bits as is used in print_insn_arg.
694 2001-10-20 Alan Modra <amodra@bigpond.net.au>
696 * ppc-opc.c (CT): Make it an optional operand.
698 2001-10-17 Chris Demetriou <cgd@broadcom.com>
700 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
701 SB-1 binaries include instructions specific to the SB-1.
702 * mips-opc.c (SB1): New definition.
703 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
704 "recip.ps", "rsqrt.ps", and "sqrt.ps".
706 2001-10-17 matthew green <mrg@redhat.com>
708 * ppc-opc.c (STRM): New AltiVec operand.
709 (XDSS): New AltiVec instruction form.
710 (mtvscr): Correct operand list.
711 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
713 2001-10-17 Alan Modra <amodra@bigpond.net.au>
715 * po/POTFILES.in: Regenerate.
717 2001-10-13 matthew green <mrg@redhat.com>
719 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
720 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
721 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
723 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
725 * cgen-ibld.in: Include safe-ctype.h in preference to
727 * cgen-asm.in: Include safe-ctype.h in preference to
728 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
729 TOLOWER instead of tolower.
730 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
731 string elements in constructed regular expression.
732 * fr30-asm.c: Regenerate.
733 * fr30-desc.c: Regenerate.
734 * fr30-ibld.c: Regenerate.
735 * m32r-asm.c: Regenerate.
736 * m32r-desc.c: Regenerate.
737 * m32r-ibld.c: Regenerate.
738 * openrisc-asm.c: Regenerate.
739 * openrisc-desc.c: Regenerate.
740 * openrisc-ibld.c: Regenerate.
741 * po/opcodes.pot: Regenerate.
743 2001-10-12 matthew green <mrg@redhat.com>
745 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
746 instruction field instruction/extraction functions for new BookE
747 DE form instructions.
748 (CT): New macro for CT field in an X form instruction.
749 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
751 (PPC64): Don't include PPC_OPCODE_PPC.
752 (403): New opcode macro for PPC403 processors.
753 (BOOKE): New opcode macro for BookE processors.
754 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
755 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
756 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
757 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
758 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
759 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
760 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
761 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
762 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
763 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
764 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
765 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
766 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
767 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
769 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
770 for a disassembler option of `booke', `booke32' or `booke64' to enable
771 BookE support in the disassembler.
773 2001-10-12 John Healy <jhealy@redhat.com>
775 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
776 for the length when extracting the base part of the insn.
778 2001-10-09 Bruno Haible <haible@clisp.cons.org>
780 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
781 regular expression. Fix some formatting problems.
782 * fr30-asm.c: Regenerate.
783 * openrisc-asm.c: Regenerate.
784 * m32r-asm.c: Regenerate.
786 2001-10-09 Christian Groessler <cpg@aladdin.de>
788 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
789 of indirect register memory accesses to be same format the
792 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
794 * sh-opc.h: Fix encoding of least significant nibble of the
795 DSP single data transfer instructions.
797 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
800 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
802 * cgen-asm.in: Fix compile time warning messages in generated
804 * cgen-dis.in: The same.
805 * cgen-ibld.in: The same.
806 * fr30-asm.c: Regenerate.
807 * fr30-desc.c: Regenerate.
808 * fr30-dis.c: Regenerate.
809 * fr30-ibld.c: Regenerate.
810 * fr30-opc.c: Regenerate.
811 * m32r-asm.c: Regenerate.
812 * m32r-desc.c: Regenerate.
813 * m32r-dis.c: Regenerate.
814 * m32r-ibld.c: Regenerate.
815 * m32r-opc.c: Regenerate.
816 * m32r-opinst.c Regenerate.
817 * openrisc-asm.c: Regenerate.
818 * openrisc-desc.c: Regenerate.
819 * openrisc-dis.c: Regenerate.
820 * openrisc-ibld.c: Regenerate.
821 * openrisc-opc.c: Regenerate.
822 * openrisc-opc.h: Regenerate.
823 * Makefile.in: Regenerate.
824 * po/POTFILES.in: Regenerate.
825 * po/opcodes.pot: Regenerate.
827 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
829 * arm-opc.h (arm_opcodes): Add cirrus insns.
831 * arm-dis.c (print_insn_arm): Add 'I' case.
833 2001-10-03 Alan Modra <amodra@bigpond.net.au>
835 * po/POTFILES.in: Regenerate.
836 * configure: Regenerate.
838 2001-10-02 Alan Modra <amodra@bigpond.net.au>
840 * Makefile.am (Makefile): Depend on bfd/configure.in.
842 * Makefile.in: Regenerate.
844 2001-09-30 John Healy <jhealy@redhat.com>
846 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
847 calls to cgen_get_insn_value and cgen_put_insn_value calls.
848 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
850 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
852 * Makefile.am: Update dependencies with "make dep-am".
853 * Makefile.in: Regenerate.
855 2001-09-26 Alan Modra <amodra@bigpond.net.au>
857 * arc-dis.c: Formatting fixes.
858 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
860 2001-09-21 Bruno Haible <haible@clisp.cons.org>
862 * arc-dis.c: Don't include <ctype.h>.
863 * openrisc-desc.c: Likewise.
864 * openrisc-ibld.c: Likewise.
866 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
868 * fr30-opc.c: Fix compile time warning messages.
869 * i370-opc.c: Fix compile time warning messages.
870 * i960-dis.c: Fix compile time warning messages.
871 * m32r-asm.c: Fix compile time warning messages.
872 * m32r-desc.c: Fix compile time warning messages.
873 * m32r-dis.c: Fix compile time warning messages.
874 * m32r-ibld.c: Fix compile time warning messages.
875 * m32r-opc.c: Fix compile time warning messages.
876 * m32r-opinst.c: Fix compile time warning messages.
877 * ns32k-dis.c: Fix compile time warning messages.
878 * openrisc-asm.c: Fix compile time warning messages.
879 * openrisc-desc.c: Fix compile time warning messages.
880 * openrisc-dis.c: Fix compile time warning messages.
881 * openrisc-ibld.c: Fix compile time warning messages.
882 * openrisc-opc.c: Fix compile time warning messages.
883 * pdp11-dis.c: Fix compile time warning messages.
884 * tic54x-dis.c: Fix compile time warning messages.
885 * v850-opc.c: Fix compile time warning messages.
886 * vax-dis.c: Fix compile time warning messages.
887 * w65-opc.h: Fix compile time warning messages.
888 * z8k-opc.h: Fix compile time warning messages.
889 * z8kgen.c: Fix compile time warning messages.
891 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
893 * arm-dis.c: Fix compile time warning messages.
894 * cgen-asm.c: Fix compile time warning messages.
895 * cgen-dis.c: Fix compile time warning messages.
896 * cris-dis.c: Fix compile time warning messages.
897 * d10v-dis.c: Fix compile time warning messages.
898 * fr30-asm.c: Fix compile time warning messages.
899 * fr30-desc.c: Fix compile time warning messages.
900 * fr30-dis.c: Fix compile time warning messages.
901 * fr30-ibld.c: Fix compile time warning messages.
903 2001-09-18 Bruno Haible <haible@clisp.cons.org>
905 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
906 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
907 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
908 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
910 (cgen_keyword_add): Use ISALNUM instead of isalnum.
911 (hash_keyword_name): Use TOLOWER instead of tolower.
912 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
913 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
915 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
916 * fr30-desc.c: Don't include <ctype.h>.
917 * fr30-ibld.c: Likewise.
918 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
919 (load_insn_classes, parse_resource_users, load_depfile): Use
920 ISSPACE instead of isspace.
921 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
922 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
924 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
925 * m32r-desc.c: Don't include <ctype.h>.
926 * m32r-ibld.c: Likewise.
927 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
928 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
930 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
932 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
934 * Makefile.am: Add rules and dependencies to create the s/390 opcode
935 table out of s390-opc.txt automatically.
936 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
937 * s390-mkopc.c (dumpTable): Change output to create a complete file.
938 * s390-opc.c: New improved opcode format macros and remove the
939 pregenerated opcode table.
940 * s390-opc.txt: Adapt to new improved opcode format macros.
942 2001-09-14 David Schleef <ds@schleef.org>
944 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
946 2001-09-04 Alan Modra <amodra@bigpond.net.au>
948 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
949 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
951 2001-08-31 Eric Christopher <echristo@redhat.com>
952 Jason Eckhardt <jle@redhat.com>
954 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
955 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
958 2001-08-31 Andreas Jaeger <aj@suse.de>
960 * tic54x-opc.c: Add default initializers to avoid warnings.
962 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
963 * arc-ext.c: Likewise.
965 2001-08-28 matthew green <mrg@redhat.com>
967 * ppc-opc.c (icbt): Order correctly.
969 2001-08-27 David Edelsohn <dje@watson.ibm.com>
970 Torbjorn Granlund <tege@swox.com>
972 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
974 (insert_ds): Complain if not a multiple of 4.
976 (XSYNC_MASK): Define.
977 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
978 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
980 2001-08-26 Andreas Jaeger <aj@suse.de>
982 * h8500-opc.h: Add default initializers to h8500_table to shut up
985 2001-08-25 Andreas Jaeger <aj@suse.de>
987 * tic54x-dis.c: Add unused attributes where needed.
989 * z8k-dis.c (output_instr): Add unused attribute.
991 * h8300-dis.c: Add missing prototypes.
992 (bfd_h8_disassemble): Make static.
994 * cris-dis.c: Add missing prototype.
995 * h8500-dis.c: Likewise.
996 * m68hc11-dis.c: Likewise.
997 * pj-dis.c: Likewise.
998 * tic54x-dis.c: Likewise.
999 * v850-dis.c: Likewise.
1000 * vax-dis.c: Likewise.
1001 * w65-dis.c: Likewise.
1002 * z8k-dis.c: Likewise.
1004 * d10v-dis.c: Add missing prototype.
1005 (dis_long): Remove unused variable.
1006 (dis_2_short): Likewise.
1008 * sh-dis.c: Add missing prototypes.
1009 * v850-opc.c: Likewise.
1010 Add unused attributes where needed.
1012 * ns32k-dis.c: Add missing prototypes.
1013 (bit_extract_simple): Remove unused variable.
1015 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1017 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1018 branch instructions for gcc 3.0.
1019 * opcodes/s390-opc.txt: Likewise.
1021 2001-08-21 Andreas Jaeger <aj@suse.de>
1023 * i960-dis.c: Add parameters for prototypes
1024 (ctrl): Add unused attributes.
1026 (put_abs): Likewise.
1028 * mips-dis.c: Add missing prototypes.
1029 * a29k-dis.c: Likewise.
1030 * arc-dis.c: Likewise.
1031 * ia64-opc.c: Likewise.
1033 * s390-dis.c: Add missing prototypes.
1034 (init_disasm): Remove unused attribute since the parameter is
1037 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1039 * mips-opc.c (M1): Define. Reformatted Code.
1040 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1043 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1045 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1046 the corresponding non-likely insn is in MIPS I.
1048 2001-08-13 Kazu Hirata <kazu@hxi.com>
1050 * mcore-dis.c: Fix formatting.
1051 * mips-dis.c: Likewise.
1052 * pj-dis.c: Likewise.
1053 * z8k-dis.c: Likewise.
1055 2001-08-12 Richard Henderson <rth@redhat.com>
1057 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1058 to *VALUEP. Regenerate all cgen files.
1060 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1062 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1064 * mips-opc.c (G6): Undefine.
1065 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1066 as the first "move" alternative.
1068 2001-08-10 Andreas Jaeger <aj@suse.de>
1070 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1072 * configure: Regenerate.
1074 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1076 * ppc-opc.c: Revert 2001-08-08.
1078 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1080 * dis-buf.c (generic_strcat_address): Add missing prototype.
1081 #if 0 the functions as it is unused.
1083 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1085 1999-10-25 Torbjorn Granlund <tege@swox.com>
1086 * ppc-opc.c: Include "bfd.h".
1087 (powerpc_operands): Add new field for reloc type.
1089 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1091 * mips-dis.c (print_insn_arg): Don't use software integer registers
1092 for coprocessor registers.
1093 (get_mips_isa): Removed.
1094 (is_newabi): New function, checks if NewABI is used.
1095 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1097 2001-08-01 Christian Groessler <cpg@aladdin.de>
1099 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1100 get stderr definition.
1101 (internal, gas): Removed warnings.
1102 (gas): Create a correct final entry for created array.
1103 * z8k-opc.h: Recreated with new z8kgen.
1105 2001-07-28 Kazu Hirata <kazu@hxi.com>
1107 * i386-dis.c: Fix formatting.
1109 2001-07-28 Matthias Kramm <kramm@quiss.org>
1111 * i386-dis.c: Change formatting conventions for architecture
1112 i386:intel to better match the format of various intel i386
1113 assemblers, like nasm, tasm or masm.
1115 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1117 * Makefile.am: Update dependencies with "make dep-am".
1118 * Makefile.in: Regenerate
1120 2001-07-24 Kazu Hirata <kazu@hxi.com>
1122 * alpha-dis.c: Fix formatting.
1123 * cris-dis.c: Likewise.
1124 * d10v-dis.c: Likewise.
1125 * d30v-dis.c: Likewise.
1126 * m10300-dis.c: Likewise.
1127 * tic54x-dis.c: Likewise.
1129 2001-07-23 Kazu Hirata <kazu@hxi.com>
1131 * m68k-dis.c: Fix formatting.
1132 * pj-dis.c: Likewise.
1133 * s390-dis.c: Likewise.
1134 * z8k-dis.c: Likewise.
1136 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1138 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1139 into the rest of the surrounding definitions.
1141 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1143 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1144 for lgdt, lidt, sgdt, sidt.
1146 2001-07-13 Philip Blundell <philb@gnu.org>
1148 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1150 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1152 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1154 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1155 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1156 to verify if it is worth parsing the insn as insn "x". Also update
1157 error message when insn is not a recognized format of the insn vs
1158 when the insn is completely unrecognized.
1160 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1162 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1164 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1165 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1167 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1169 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1170 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1171 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1173 2001-07-05 Ben Elliston <bje@redhat.com>
1175 * Makefile.am (CPUDIR): Define.
1176 (stamp-m32r): Update dependencies.
1177 (stamp-fr30): Ditto.
1178 (stamp-openrisc): Ditto.
1179 * Makefile.in: Regenerate.
1181 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1183 * ppc-opc.c: Fix encoding of 'clf' instruction.
1185 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1187 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1189 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1191 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1192 * cgen-opc.c (cgen_keyword_add): Ignore special first
1193 character when building nonalpha_chars field.
1195 2001-06-24 Ben Elliston <bje@redhat.com>
1197 * m88k-dis.c: Format to conform to GNU coding standards.
1199 2001-06-23 Andreas Jaeger <aj@suse.de>
1201 * disassemble.c (disassembler_usage): Add unused attribute.
1203 2001-06-22 Eric Christopher <echristo@redhat.com>
1205 * mips-opc.c: Move prefx to start of the table.
1207 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1209 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1212 2001-06-22 Pauli <pauli@moreton.com.au>
1214 * m68k-opc.c: Add wdebug instruction.
1216 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1218 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1220 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1222 * cgen-asm.c (cgen_parse_keyword): When looking for the
1223 boundaries of a keyword, allow any special characters
1224 that are actually in one of the allowed keyword.
1225 * cgen-opc.c (cgen_keyword_add): Add any special characters
1226 to the nonalpha_chars field.
1228 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1230 * s390-opc.c: Add lgh instruction.
1231 * s390-opc.txt: Likewise.
1233 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1235 * i386-dis.c: Group function prototypes in one place.
1236 (FLOATCODE): Redefine as 1.
1237 (USE_GROUPS): Redefine as 2.
1238 (USE_PREFIX_USER_TABLE): Redefine as 3.
1239 (X86_64_SPECIAL): Define as 4.
1240 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1241 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1242 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1243 (dis386): New table combining above four tables.
1244 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1245 (dis386_twobyte): New table combining above two tables.
1246 (x86_64_table): New table to handle x86_64.
1248 (float_mem_att, float_mem_intel): Delet.
1249 (float_mem): New table combining above two tables.
1250 (print_insn_i386): Modify for above.
1251 (dofloat): Likewise.
1252 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1253 Return 0 on success, 1 if no valid alternative.
1254 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1255 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1256 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1257 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1259 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1260 (OP_I64): If not 64-bit mode, call OP_I.
1261 OP_OFF64): If not 64-bit mode, call OP_OFF.
1262 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1263 'ignore'/'ignored' to 'bytemode'.
1265 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1267 * configure.in: Sort 'ta' case statement.
1268 * configure: Regenerate.
1270 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1272 (disx86_64_att): Likewise.
1273 (dis386_twobyte_att): Likewise.
1274 (print_insn_i386): Don't print branch hints as a prefix.
1275 (putop): 'H' macro prints branch hints.
1276 (get64): Kill compile warnings.
1278 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1280 * sh-opc.h (sh_table): Don't use empty initializers.
1282 2001-06-06 Christian Groessler <cpg@aladdin.de>
1284 * z8k-dis.c: Fix formatting.
1285 (unpack_instr): Remove unused cases in switch statement. Add
1286 safety abort() in default case.
1287 (unparse_instr): Add safety abort() in default case.
1289 2001-06-06 Peter Jakubek <pjak@snafu.de>
1291 * m68k-dis.c (print_insn_m68k): Fix typo.
1292 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1293 mcf (ColdFire) div, rem and moveb instructions.
1295 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1297 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1298 (cond_jump_mode, loop_jcxz_mode): Define.
1299 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1300 appropriate, and 'F' suffix to loop insns.
1301 (disx86_64_att): Likewise.
1302 (dis386_twobyte_att): Likewise.
1303 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1304 Output data size prefix for long conditional jumps. Output cs and
1306 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1307 (OP_J): Don't make PREFIX_DATA used.
1309 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1311 * sh-opc.h (sh_table): Complete last element entry to avoid
1314 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1316 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1318 2001-05-23 Alan Modra <amodra@one.net.au>
1320 * arc-opc.c: Whitespace changes.
1322 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1324 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1327 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1329 * cgen-dis.in (extract_normal): Complete support for min<base case.
1331 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1333 * mips-dis.c (INSNLEN): Rename MAXLEN.
1334 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1335 (print_insn_arg): Remove $ prefix of register names.
1336 (set_mips_isa_type): Remove.
1337 (mips_isa_type): New function.
1338 (get_mips_isa): New Function.
1339 (print_insn_mips): Rename _print_insn_mips.
1340 (_print_insn_mips): New function, contains code which was
1341 duplicated in print_insn_big_mips and print_insn_little_mips.
1342 (print_insn_big_mips): Moved code to _print_insn_mips.
1343 (print_insn_little_mips): Likewise.
1344 (print_mips16_insn_arg): Remove $ prefix of register names.
1345 Print error message before abort.
1347 2001-05-14 J.T. Conklin <jtc@redback.com>
1349 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1350 simplified mnemonics used for setting PPC750-specific special
1353 2001-05-12 H.J. Lu <hjl@gnu.org>
1355 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1358 2001-05-12 Peter Targett <peter.targett@arccores.com>
1360 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1361 register to r/w. Formatting fixes throughout file.
1363 2001-05-12 Alan Modra <amodra@one.net.au>
1365 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1367 (twobyte_has_modrm): Update table.
1368 (need_modrm): Give it file scope.
1369 (MODRM_CHECK): Define.
1370 (dofloat): Use MODRM_CHECK.
1375 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1377 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1378 even at end of a section.
1379 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1380 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1382 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1384 * disassemble.c (disassembler_usage): Remove unused attribute.
1386 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1388 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1390 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1392 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1393 assume incoming buffer already has the base insn loaded. Handle
1394 smaller-than-base instructions for variable-length case.
1396 2001-05-04 Alan Modra <amodra@one.net.au>
1398 * i386-dis.c (Ev, Ed): Remove duplicate define.
1401 (OP_XS): New function.
1402 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1404 (dis386_twobyte_intel): Likewise.
1405 (prefix_user_table): Use MS for maskmovq operand.
1407 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1409 * Makefile.am: Add OpenRISC target.
1410 * Makefile.in: Regenerated.
1412 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1414 * configure.in (bfd_openrisc_arch): Add target.
1415 * configure: Regenerated.
1417 * openrisc-asm.c: New file.
1418 * openrisc-desc.c: Likewise.
1419 * openrisc-desc.h: Likewise.
1420 * openrisc-dis.c: Likewise.
1421 * openrisc-ibld.c: Likewise.
1422 * openrisc-opc.c: Likewise.
1423 * openrisc-opc.h: Likewise.
1425 2001-04-24 Christian Groessler <cpg@aladdin.de>
1427 * z8k-dis.c: add names of control registers (ctrl_names);
1428 (seg_length): provides instruction length fixup for segmented
1429 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1430 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1431 (unparse_intr): handle CLASS_PR, print addresses without '#'
1432 * z8k-opc.h: re-created with new z8kgen
1433 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1434 entries for ldctl/ldctlb instruction
1436 2001-04-06 Andreas Jaeger <aj@suse.de>
1438 * i386-dis.c: Add ffreep instruction.
1440 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1442 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1444 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1446 * i386-dis.c (PREGRP25): Define.
1447 (dis386_twobyte_att): Use here in place of "movntq" entry.
1448 (dis386_twobyte_intel): Likewise.
1449 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1451 (dis386_twobyte_att): Use here.
1452 (dis386_twobyte_intel): Likewise.
1453 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1454 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1455 (prefix_user_table): Cosmetic changes to "bad" entries.
1457 2001-03-23 Nick Clifton <nickc@redhat.com>
1459 * mips-opc.c: Remove extraneous whitespace.
1460 * mips-dis.c: Remove extraneous whitespace.
1462 2001-03-22 Ben Elliston <bje@redhat.com>
1464 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1465 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1466 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1467 to allay a compiler warning.
1469 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1471 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1472 (dis386_twobyte_intel): Likewise.
1473 (twobyte_has_modrm): Set entry for paddq, psubq.
1475 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1477 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1478 determination via CGEN_COMPUTE_MACH.
1479 * fr30-desc.c: Regenerate.
1480 * fr30-dis.c: Regenerate.
1481 * fr30-opc.h: Regenerate.
1482 * m32r-desc.c: Regenerate.
1483 * m32r-dis.c: Regenerate.
1484 * m32r-opc.h: Regenerate.
1485 * m32r-opinst.c: Regenerate.
1487 2001-03-20 H.J. Lu <hjl@gnu.org>
1489 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1490 * configure: Rebuild.
1492 2001-03-19 Jim Wilson <wilson@redhat.com>
1494 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1495 notestr if larger than xsect.
1496 (in_class): Handle format M5.
1497 * ia64-asmtab.c: Regnerate.
1499 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1501 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1502 has more than one byte left to read.
1504 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1506 * s390-opc.c: Add new opcodes. Smooth out formatting.
1507 * s390-opc.txt: Add new opcodes.
1509 2001-03-06 Nick Clifton <nickc@redhat.com>
1511 * arm-dis.c (print_insn_thumb): Compute destination address
1512 of BLX(1) instruction by taking bit 1 from PC and not from bit
1515 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1517 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1518 so command line switches will work.
1520 2001-03-05 Dave Brolley <brolley@redhat.com>
1522 * fr30-asm.c: Regenerate.
1523 * fr30-desc.c: Regenerate.
1524 * fr30-desc.h: Regenerate.
1525 * fr30-dis.c: Regenerate.
1526 * fr30-ibld.c: Regenerate.
1527 * fr30-opc.c: Regenerate.
1528 * fr30-opc.h: Regenerate.
1529 * m32r-asm.c: Regenerate.
1530 * m32r-desc.c: Regenerate.
1531 * m32r-desc.h: Regenerate.
1532 * m32r-dis.c: Regenerate.
1533 * m32r-ibld.c: Regenerate.
1534 * m32r-opc.c: Regenerate.
1535 * m32r-opc.h: Regenerate.
1536 * m32r-opinst.c: Regenerate.
1538 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1540 * m68k-opc.c: fix cpushl according to Motorola. Enable
1541 bunch of instructions for Coldfire 5407 and add all new.
1543 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1545 * configure.in (BFD_VERSION): Do without grep.
1546 * configure: Regenerate.
1547 * Makefile.am: Run "make dep-am".
1548 * Makefile.in: Regenerate.
1550 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1552 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1553 * ia64-asmtab.c: Regenerate.
1555 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1557 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1558 separate variants: one for IMM22 and the other for IMM14.
1559 * ia64-asmtab.c: Regenerate.
1561 2001-02-21 Greg McGary <greg@mcgary.org>
1563 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1565 2001-02-20 H.J. Lu <hjl@gnu.org>
1567 * Makefile.am (ia64-ic.tbl): Remove the target.
1568 (ia64-raw.tbl): Likewise.
1569 (ia64-waw.tbl): Likewise.
1570 (ia64-war.tbl): Likewise.
1571 (ia64-asmtab.c): Generate it in the source directory.
1572 * Makefile.in: Regenerated.
1574 2001-02-18 lars brinkhoff <lars@nocrew.org>
1576 * Makefile.am: Add PDP-11 target.
1577 * configure.in: Likewise.
1578 * disassemble.c: Likewise.
1579 * pdp11-dis.c: New file.
1580 * pdp11-opc.c: New file.
1582 2001-02-14 Jim Wilson <wilson@redhat.com>
1584 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1585 * ia64-asmtab.c: Regenerate.
1587 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1589 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1593 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1595 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1596 the following instruction not of the jump itself for the jump
1598 (print_mips16_insn_arg): Likewise.
1600 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1602 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1604 * Makefile.in: Regenerate.
1606 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1608 * Makefile.am: Add linux target for S/390.
1609 * Makefile.in: Likewise.
1610 * configure.in: Likewise.
1611 * disassemble.c: Likewise.
1612 * s390-dis.c: New file.
1613 * s390-mkopc.c: New file.
1614 * s390-opc.c: New file.
1615 * s390-opc.txt: New file.
1617 2001-02-05 Jim Wilson <wilson@redhat.com>
1619 * ia64-asmtab.c: Revert 2000-12-16 change.
1621 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1623 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1624 * m32r-desc.h: Regenerate.
1626 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1628 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1629 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1631 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1633 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1635 2001-01-13 Nick Clifton <nickc@redhat.com>
1637 * disassemble.c: Remove spurious white space.
1639 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1641 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1644 2001-01-11 Peter Targett <peter.targett@arccores.com>
1646 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1647 * Makefile.am (C_FILES): Add arc-ext.c.
1648 (ALL_MACHINES) Add arc-ext.lo.
1649 (INCLUDES) Add opcode directory to list.
1650 New dependency entry for arc-ext.lo.
1651 * disassemble.c (disassembler): Correct call to
1652 arc_get_disassembler.
1653 * arc-opc.c: New update for ARC, including full base
1654 instructions for ARC variants.
1655 * arc-dis.h, arc-dis.c: New update for ARC, including
1656 extensibility functionality.
1657 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1659 2001-01-10 Jan Hubicka <jh@suse.cz>
1661 * i386-dis.c (PREGRP15 - PREGRP24): New.
1662 (dis386_twobyt): Add SSE2 instructions.
1663 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1664 (twobyte_uses_f3_prefix): ... this one.
1665 (grps): Add SSE instructions.
1666 (prefix_user_table): Add two new slots; add SSE2 instructions.
1667 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1668 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1669 to prefix_user_table.
1670 (OP_E): Accept mfence and lfence as well.
1671 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1672 (OP_XMM): Support REX extensions.
1676 2001-01-09 Nick Clifton <nickc@redhat.com>
1678 * arm-dis.c (print_insn): Set pc to zero for instructions with
1679 a reloc associated with them.
1681 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1683 * cgen-asm.in (parse_insn_normal): Changed syn to be
1684 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1685 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1686 to '\0' to use 0 instead.
1687 * cgen-dis.in (print_insn_normal): Ditto.
1688 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1690 2001-01-05 Jan Hubicka <jh@suse.cz>
1692 * i386-dis.c: Add x86_64 support.
1693 (rex): New static variable.
1694 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1695 (USED_REX): New macro.
1696 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1697 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1698 (OP_REG, OP_OFF): Declare.
1699 (get64, get32, get32s): New functions.
1700 (r??_reg): New constants.
1701 (dis386_att): Change templates of instruction implicitly promoted
1702 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1704 (dis386_intel): Likewise.
1705 (dixx86_64_att): New table based on dis386_att.
1706 (dixx86_64_intel): New table based on dis386_intel.
1707 (names64, names8rex): New global variable.
1708 (names32, names16): Add extended registers.
1709 (prefix_user_t): Recognize rex prefixes.
1710 (prefix_name): Print REX prefixes nicely.
1711 (op_riprel): New global variable.
1712 (start_pc): Set type to bfd_vma.
1713 (print_insn_i386): Detect the 64bit mode and use proper table;
1714 move ckprefix after initializing the buffer; output unused rex prefixes;
1715 output information about target of RIP relative addresses.
1716 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1717 (print_operand_value): New function.
1718 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1719 REX prefix and new modes.
1720 (get64, get32s): New.
1721 (get32): Return bfd_signed_vma type.
1722 (set_op): Initialize the op_riprel.
1723 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1725 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1727 cgen-dis.in (read_insn): Use bfd_get_bits()
1729 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1731 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1732 (hash_insn_list): Likewise
1733 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1734 (extract_1): Use bfd_get_bits().
1735 (extract_normal): Apply sign extension to both extraction
1737 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1738 (cgen_put_insn_value): Use bfd_put_bits()
1740 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1742 * cgen-asm.in (parse_insn_normal): Print better error message for
1743 instructions with missing operands.
1745 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1747 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1749 2000-12-16 Nick Clifton <nickc@redhat.com>
1751 * Makefile.in: Regenerate.
1752 * aclocal.m4: Regenerate.
1753 * config.in: Regenerate.
1754 * configure.in: Add spacing.
1755 * configure: Regenerate.
1756 * ia64-asmtab.c: Regenerate.
1757 * po/opcodes.pot: Regenerate.
1759 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1761 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1762 error messages over later parse-time ones.
1764 2000-12-12 Jim Wilson <wilson@redhat.com>
1766 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1768 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1769 (print_dependency_table): Print NULL if semantics field not set.
1770 (insert_opcode_dependencies): Mark cmp parameter as unused.
1771 (print_main_table): Use fprintf_vma to print long long fields.
1772 (main): Mark argv paramter as unused. Convert to old style definition.
1773 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1774 * ia64-asmtab.c: Regnerate.
1776 2000-12-09 Nick Clifton <nickc@redhat.com>
1778 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1781 * fr30-dis.c: Regenerate.
1783 2000-12-08 Peter Targett <peter.targett@arccores.com>
1785 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1786 * Makefile.am (C_FILES): Add arc-ext.c.
1787 (ALL_MACHINES) Add arc-ext.lo.
1788 (INCLUDES) Add opcode directory to list.
1789 New dependency entry for arc-ext.lo.
1790 * disassemble.c (disassembler): Correct call to
1791 arc_get_disassembler.
1792 * arc-opc.c: New update for ARC, including full base
1793 instructions for ARC variants.
1794 * arc-dis.h, arc-dis.c: New update for ARC, including
1795 extensibility functionality.
1796 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1798 2000-12-03 Chris Demetriou cgd@sibyte.com
1800 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1801 MOD_HILO, and MOD_LO macros.
1803 * mips-opc.c (M1, M2): Delete.
1804 (mips_builtin_opcodes): Remove all uses of M1.
1806 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1807 instructions take "G" format second operands and use the
1809 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1811 Delete "sel" code operands from mfc1 and mtc1.
1812 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1815 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1816 Chris Demetriou cgd@sibyte.com
1818 * mips-opc.c (mips_builtin_opcodes): Finish additions
1819 for MIPS32 support, and clean up existing entries for
1820 aesthetics, consistency with the MIPS32 ISA, and
1821 with consistency the rest of the table.
1823 2000-12-01 Nick Clifton <nickc@redhat.com>
1825 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1828 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1830 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1831 specifiers. Update 'B' for new constant names, and remove
1833 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1834 near the top of the array, so they are disassembled properly.
1835 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1836 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1837 specifier. Add 'H' format specifier variants for "mfc1,"
1838 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1839 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1840 "wait" variant which uses 'J' operand specifier.
1842 * mips-dis.c (set_mips_isa_type): Update to use
1843 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1844 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1845 * mips-opc.c (I32): New constant for instructions added in
1848 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1850 * mips-dis.c (set_mips_isa_type): Add cases for
1851 bfd_mach_mips5 and bfd_mach_mips64.
1852 * mips-opc.c (I64): New definitions.
1854 * mips-dis.c (set_mips_isa_type): Add case for
1857 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1859 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1860 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1861 Initialize variable dc to NULL.
1862 (print_insn_shx): Remove unused label d_reg_n.
1864 2000-11-24 Nick Clifton <nickc@redhat.com>
1866 * arm-opc.h: Add new opcode formatting parameter 'B'.
1867 (arm_opcodes): Add XScale, v5, and v5te instructions.
1868 (thumb_opcodes): Add v5t instructions.
1870 * arm-dis.c (print_insn_arm): Handle new 'B' format
1872 (print_insn_thumb): Decode BLX(1) instruction.
1874 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1876 * mips-opc.c: Fix file header comment.
1878 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1880 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1881 print_insn_cris_with_register_prefix.
1883 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1885 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1887 2000-11-07 Matthew Green <mrg@redhat.com>
1889 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1890 must be loaded there in their entirety.
1892 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1894 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1895 (compute_arch_mask): Add v8plusb and v9b machines.
1896 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1897 * sparc-opc.c: Support for Cheetah instruction set.
1898 (prefetch_table): Add #invalidate.
1900 2000-10-16 Nick Clifton <nickc@redhat.com>
1902 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1904 2000-10-06 Dave Brolley <brolley@redhat.com>
1906 * fr30-desc.h: Regenerate.
1907 * m32r-desc.h: Regenerate.
1908 * m32r-ibld.c: Regenerate.
1910 2000-10-05 Jim Wilson <wilson@redhat.com>
1912 * ia64-ic.tbl: Update from Intel.
1913 * ia64-asmtab.c: Regenerate.
1915 2000-10-04 Kazu Hirata <kazu@hxi.com>
1917 * ia64-gen.c: Convert C++-style comments to C-style comments.
1918 * tic54x-dis.c: Likewise.
1920 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1922 Changes to add dollar prefix to registers for files where user symbols
1923 don't have a leading underscore. Fix formatting.
1924 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1925 (format_reg): Add parameter with_reg_prefix. All callers changed.
1926 (print_with_operands): Ditto.
1927 (print_insn_cris_generic): Renamed from print_insn_cris, add
1928 parameter with_reg_prefix.
1929 (print_insn_cris_with_register_prefix,
1930 print_insn_cris_without_register_prefix, cris_get_disassembler):
1932 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1934 2000-09-22 Jim Wilson <wilson@redhat.com>
1936 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1937 gt, ge, ngt, and nge.
1938 * ia64-asmtab.c: Regenerate.
1940 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1941 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1942 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1943 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1944 * ia64-asmtab.c: Regnerate.
1946 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1948 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1949 Add mfc0 and mtc0 with sub-selection values.
1950 Add clo and clz opcodes.
1951 Add msub and msubu instructions for MIPS32.
1952 Add madd/maddu aliases for mad/madu for MIPS32.
1953 Support wait, deret, eret, movn, pref for MIPS32.
1954 Support tlbp, tlbr, tlbwi, tlbwr.
1957 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1958 (print_insn_arg): Handle 'H' args.
1959 (set_mips_isa_type): Recognize 4K.
1960 Use CPU_* defines instead of hardcoded numbers.
1962 2000-09-11 Catherine Moore <clm@redhat.com>
1964 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1965 (d30v_format_tab): Use Rb2 for modinc and moddec.
1967 2000-09-07 Catherine Moore <clm@redhat.com>
1969 * d30v-opc.c (d30v_format_tab): Use format Ra for
1972 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1974 * configure: Rebuilt with new libtool.m4.
1976 2000-09-05 Nick Clifton <nickc@redhat.com>
1978 * configure: Regenerate.
1979 * po/opcodes.pot: Regenerate.
1981 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1983 * acinclude.m4: Include libtool and gettext macros from the
1985 * aclocal.m4, configure: Rebuilt.
1987 2000-08-30 Kazu Hirata <kazu@hxi.com>
1989 * tic80-dis.c: Fix formatting.
1991 2000-08-29 Kazu Hirata <kazu@hxi.com>
1993 * w65-dis.c: Fix formatting.
1995 2000-08-28 Mark Hatle <mhatle@mvista.com>
1997 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1998 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1999 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2000 instructions. Added extended mnemonic mftbl as defined in the
2001 405GP manual for all PPCs.
2003 2000-08-28 Jim Wilson <wilson@redhat.com>
2005 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2006 call. Change last goto to use failed instead of done.
2008 2000-08-28 Dave Brolley <brolley@redhat.com>
2010 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2011 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2012 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2013 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2014 * cgen-dis.in (read_insn): New static function.
2015 (print_insn): Use read_insn to read the insn into the buffer and set
2017 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2019 * fr30-asm.c: Regenerated.
2020 * fr30-desc.c: Regenerated.
2021 * fr30-desc.h: Regenerated.
2022 * fr30-dis.c: Regenerated.
2023 * fr30-ibld.c: Regenerated.
2024 * fr30-opc.c: Regenerated.
2025 * fr30-opc.h: Regenerated.
2026 * m32r-asm.c: Regenerated.
2027 * m32r-desc.c: Regenerated.
2028 * m32r-desc.h: Regenerated.
2029 * m32r-dis.c: Regenerated.
2030 * m32r-ibld.c: Regenerated.
2031 * m32r-opc.c: Regenerated.
2033 2000-08-28 Kazu Hirata <kazu@hxi.com>
2035 * tic30-dis.c: Fix formatting.
2037 2000-08-27 Kazu Hirata <kazu@hxi.com>
2039 * sh-dis.c: Fix formatting.
2041 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2043 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2045 2000-08-24 Kazu Hirata <kazu@hxi.com>
2047 * z8k-dis.c: Fix formatting.
2049 2000-08-16 Jim Wilson <wilson@redhat.com>
2051 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2052 break, mov-immediate, nop.
2053 * ia64-opc-f.c: Delete fpsub instructions.
2054 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2055 address operand. Rewrite using macros to avoid long lines.
2056 * ia64-opc.h (POSTINC): Define.
2057 * ia64-asmtab.c: Regenerate.
2059 2000-08-15 Jim Wilson <wilson@redhat.com>
2061 * ia64-ic.tbl: Add missing entries.
2063 2000-08-08 Jason Eckhardt <jle@redhat.com>
2065 * i860-dis.c (print_br_address): Change third argument from int
2068 2000-08-07 Richard Henderson <rth@redhat.com>
2070 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2071 for MLI templates. Handle IA64_OPND_TGT64.
2073 2000-08-04 Ben Elliston <bje@redhat.com>
2075 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2076 * cgen.sh: Likewise.
2078 2000-08-02 Jim Wilson <wilson@redhat.com>
2080 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2082 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2084 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2085 Change return type from void to int. Check the combination
2086 of operands, return 1 if valid. Fix to avoid BUF overflow.
2087 Report undefined combinations of operands in COMMENT.
2088 Report internal errors to stderr. Output the adiw/sbiw
2089 constant operand in both decimal and hex.
2090 (print_insn_avr): Disassemble ldd/std with displacement of 0
2091 as ld/st. Check avr_operand () return value, handle invalid
2092 combinations of operands like unknown opcodes.
2094 2000-07-28 Ben Elliston <bje@redhat.com>
2096 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2097 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2098 * Makefile.in: Regenerate.
2099 * configure.in: Add --enable-cgen-maint option.
2100 * configure: Regenerate.
2102 2000-07-26 Dave Brolley <brolley@redhat.com>
2104 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2105 (cgen_hw_lookup_by_num): Ditto.
2106 (cgen_operand_lookup_by_name): Ditto.
2107 (print_address): Ditto.
2108 (print_keyword): Ditto.
2109 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2111 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2113 (cgen_parse_keyword): Ditto.
2115 2000-07-22 Jason Eckhardt <jle@redhat.com>
2117 * i860-dis.c: New file.
2118 (print_insn_i860): New function.
2119 (print_br_address): New function.
2120 (sign_extend): New function.
2121 (BITWISE_OP): New macro.
2122 (I860_REG_PREFIX): New macro.
2123 (grnames, frnames, crnames): New structures.
2125 * disassemble.c (ARCH_i860): Define.
2126 (disassembler): Add check for bfd_arch_i860 to set disassemble
2127 function to print_insn_i860.
2129 * Makefile.in (CFILES): Added i860-dis.c.
2130 (ALL_MACHINES): Added i860-dis.lo.
2131 (i860-dis.lo): New dependences.
2133 * configure.in: New bits for bfd_i860_arch.
2135 * configure: Regenerated.
2137 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2139 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2140 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2141 (cris-dis.lo, cris-opc.lo): New rules.
2142 * Makefile.in: Rebuild.
2143 * configure.in (bfd_cris_arch): New target.
2144 * configure: Rebuild.
2145 * disassemble.c (ARCH_cris): Define.
2146 (disassembler): Support ARCH_cris.
2147 * cris-dis.c, cris-opc.c: New files.
2148 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2150 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2152 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2153 Reported by Bill Clarke <llib@computer.org>.
2155 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2157 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2158 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2160 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2162 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2163 fput_const, extract_3, extract_5_load, extract_5_store,
2164 extract_5r_store, extract_5R_store, extract_10U_store,
2165 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2166 extract_12, extract_17, extract_22): Prototype.
2167 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2168 shadowing outer block.
2171 2000-07-05 DJ Delorie <dj@redhat.com>
2175 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2177 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2179 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2181 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2182 marked for translation (exception from the usual coding style).
2183 (print_insn_avr): Initialize insn2 to avoid warnings.
2185 2000-07-03 Kazu Hirata <kazu@hxi.com>
2187 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2188 * h8500-dis.c: Fix formatting.
2190 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2192 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2193 (CLEANFILES): Add DEPA.
2194 * Makefile.in: Regenerate.
2196 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2198 * arm-dis.c (regnames): Add an additional register set to match
2199 the set used by GCC. Make it the default.
2201 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2203 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2205 * Makefile.in: Regenerate.
2207 2000-06-20 H.J. Lu <hjl@gnu.org>
2209 * Makefile.am: Rebuild dependency.
2210 * Makefile.in: Rebuild.
2212 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2214 * Makefile.in, configure: regenerate
2215 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2217 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2219 * configure.in: Recognize m68hc12 and m68hc11.
2220 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2221 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2222 and opcode generation for m68hc11 and m68hc12.
2224 2000-06-16 Nick Duffek <nsd@redhat.com>
2226 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2227 bfd_mach_ppc_620 instead of 620.
2229 2000-06-12 Kazu Hirata <kazu@hxi.com>
2231 * h8300-dis.c: Fix formatting.
2232 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2235 2000-06-09 Denis Chertykov <denisc@overta.ru>
2237 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2239 2000-06-07 Denis Chertykov <denisc@overta.ru>
2241 * avr-dis.c: completely rewritten.
2243 2000-06-02 Kazu Hirata <kazu@hxi.com>
2245 * h8300-dis.c: Follow the GNU coding style.
2246 (bfd_h8_disassemble) Fix a typo.
2248 2000-06-01 Kazu Hirata <kazu@hxi.com>
2250 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2251 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2252 correctly. Fix a typo.
2254 2000-05-31 Nick Clifton <nickc@redhat.com>
2256 * opintl.h (_(String)): Explain why dgettext is used instead of
2259 2000-05-30 Nick Clifton <nickc@redhat.com>
2261 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2262 bindtextdomain): Replace defines with those from intl/libgettext.h
2263 to quieten gcc warnings.
2265 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2267 * Makefile.am: Update dependencies with "make dep-am"
2268 * Makefile.in: Regenerate.
2270 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2272 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2273 sign-extending operands.
2275 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2277 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2280 2000-05-21 Nick Clifton <nickc@redhat.com>
2282 * Makefile.am (LIBIBERTY): Define.
2284 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2286 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2287 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2288 (reg_names): Rename to std_reg_names. Change it to a char **
2290 (std_reg_names): New name for reg_names.
2291 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2294 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2296 * fr30-desc.h: Partially regenerated to account for changed
2297 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2298 * m32r-desc.h: Ditto.
2300 2000-05-15 Nick Clifton <nickc@redhat.com>
2302 * arm-opc.h: Use upper case for flasg in MSR and MRS
2303 instructions. Allow any bit to be set in the field_mask of
2304 the MSR instruction.
2306 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2307 field_mask of an MSR instruction.
2309 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2311 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2312 instructions changed to ldrsb/ldrsh.
2314 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2316 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2317 target addresses for 'jal' and 'j'.
2319 2000-05-10 Geoff Keating <geoffk@redhat.com>
2321 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2322 also available in common mode when powerpc syntax is being used.
2324 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2326 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2327 (dummy_print_address): Ditto.
2329 2000-05-04 Timothy Wall <twall@redhat.com>
2331 * tic54x-opc.c: New.
2332 * tic54x-dis.c: New.
2333 * disassemble.c (disassembler): Add ARCH_tic54x.
2334 * configure.in: Added tic54x target.
2336 * Makefile.am: Add tic54x dependencies.
2337 * Makefile.in: Ditto.
2339 2000-05-03 J.T. Conklin <jtc@redback.com>
2341 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2342 vector unit operands.
2343 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2344 unit instruction formats.
2345 (PPCVEC): New macro, mask for vector instructions.
2346 (powerpc_operands): Add table entries for above operand types.
2347 (powerpc_opcodes): Add table entries for vector instructions.
2349 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2350 (print_insn_little_powerpc): Likewise.
2351 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2353 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2355 * configure.in: Add bfd_powerpc_64_arch.
2356 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2359 2000-04-24 Nick Clifton <nickc@redhat.com>
2361 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2364 2000-04-23 Denis Chertykov <denisc@overta.ru>
2366 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2368 (reg_fmul_r): New. Extract source register from FMUL instruction.
2369 (reg_muls_d): New. Extract destination register from MULS instruction.
2370 (reg_muls_r): New. Extract source register from MULS instruction.
2371 (reg_movw_d): New. Extract destination register from MOVW instruction.
2372 (reg_movw_r): New. Extract source register from MOVW instruction.
2373 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2374 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2376 2000-04-22 Timothy Wall <twall@redhat.com>
2378 * ia64-gen.c (general): Add an ordered table of primary
2379 opcode names, as well as priority fields to disassembly data
2380 structures to enforce a preferred disassembly format based on the
2381 ordering of the opcode tables.
2382 (load_insn_classes): Show a useful message if IC tables are missing.
2383 (load_depfile): Ditto.
2384 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2385 distinguish preferred disassembly.
2386 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2387 format. Fix incorrect flag on fma.s/fma.s.s0.
2388 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2389 the highest priority.
2390 * ia64-opc-b.c: Use more abbreviations.
2391 * ia64-asmtab.c: Regenerate.
2393 2000-04-21 Jason Eckhardt <jle@redhat.com>
2395 * hppa-dis.c (extract_16): New function.
2396 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2397 new operand types l,y,&,fe,fE,fx.
2399 2000-04-21 Richard Henderson <rth@redhat.com>
2400 David Mosberger <davidm@hpl.hp.com>
2401 Timothy Wall <twall@redhat.com>
2402 Bob Manson <manson@charmed.cygnus.com>
2403 Jim Wilson <wilson@redhat.com>
2405 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2406 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2407 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2409 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2410 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2411 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2412 * Makefile.in: Rebuild.
2413 * configure Rebuild.
2414 * configure.in (bfd_ia64_arch): New target.
2415 * disassemble.c (ARCH_ia64): Define.
2416 (disassembler): Support ARCH_ia64.
2417 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2418 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2419 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2420 ia64-war.tbl, ia64-waw.tbl: New files.
2422 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2424 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2425 (disassemble): Use them.
2427 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2429 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2430 * Makefile.am: Update dependencies.
2431 * Makefile.in: Regenerate.
2433 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2435 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2436 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2437 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2438 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2439 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2440 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2441 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2442 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2443 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2444 ansidecl.h as sysdep.h includes it.
2446 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2448 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2449 --enable-build-warnings option.
2450 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2451 * Makefile.in, configure: Re-generate.
2453 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2455 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2456 stc GBR,@-<REG_N> is available for arch_sh1_up.
2457 Group parallel processing insn with identical mnemonics together.
2458 Make three-operand psha / pshl come first.
2460 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2462 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2463 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2464 (sh_arg_type): Add A_PC.
2465 (sh_table): Update entries using immediates. Add repeat.
2466 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2467 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2469 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2471 * po/opcodes.pot: Regenerate.
2473 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2474 (DEP): Quote when passing vars to sub-make. Add warning message
2476 (DEP1): Rewrite for "gcc -MM".
2477 (CLEANFILES): Add DEP2.
2478 Update dependencies.
2479 * Makefile.in: Regenerate.
2481 2000-04-03 Denis Chertykov <denisc@overta.ru>
2483 * avr-dis.c: Syntax cleanup.
2484 (add0fff): Print the pc relative address as a signed number.
2485 (add03f8): Likewise.
2487 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2489 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2490 the parameter ATTRIBUTE_UNUSED.
2491 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2493 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2495 * m10300-opc.c: SP-based offsets are always unsigned.
2497 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2499 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2500 [branch always] instead of "undefined".
2502 2000-03-27 Nick Clifton <nickc@redhat.com>
2504 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2505 short instructions, from end of list of long instructions.
2507 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2509 * Makefile.am (CFILES): Add avr-dis.c.
2510 (ALL_MACHINES): Add avr-dis.lo.
2512 2000-03-27 Alan Modra <alan@linuxcare.com>
2514 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2516 (print_insn_avr): Call function via pointer in K&R compatible way.
2517 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2518 add0fff, add03f8): Convert to old style function declaration and
2520 (avrdis_opcode): Add prototype.
2522 2000-03-27 Denis Chertykov <denisc@overta.ru>
2524 * avr-dis.c: New file. AVR disassembler.
2525 * configure.in (bfd_avr_arch): New architecture support.
2526 * disassemble.c: Likewise.
2527 * configure: Regenerate.
2529 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2531 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2533 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2535 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2536 flag to determine if operand is pc-relative.
2538 (d30v_format_table):
2539 (REL6S3): Renamed from IMM6S3.
2540 Added flag OPERAND_PCREL.
2541 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2542 added flag OPERAND_PCREL.
2543 (IMM12S3U): Replaced with REL12S3.
2544 (SHORT_D2, LONG_D): Delay target is pc-relative.
2545 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2546 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2547 using the REL* operands.
2548 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2549 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2550 LONG_Db, using REL* operands.
2551 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2552 (d30v_opcode_table): Use new *r formats.
2554 2000-02-28 Nick Clifton <nickc@redhat.com>
2556 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2557 'signed_overflow_ok_p'.
2559 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2561 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2562 name of the libtool directory.
2563 * Makefile.in: Rebuild.
2565 2000-02-24 Nick Clifton <nickc@redhat.com>
2567 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2568 (cgen_clear_signed_overflow_ok): New function.
2569 (cgen_signed_overflow_ok_p): New function.
2571 2000-02-23 Andrew Haley <aph@redhat.com>
2573 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2574 m32r-ibld.c, m32r-opc.h: Rebuild.
2576 2000-02-23 Linas Vepstas <linas@linas.org>
2578 * i370-dis.c, i370-opc.c: New.
2580 * disassemble.c (ARCH_i370): Define.
2581 (disassembler): Handle it.
2583 * Makefile.am: Add support for Linux/IBM 370.
2584 * configure.in: Likewise.
2586 * Makefile.in: Regenerate.
2587 * configure: Likewise.
2589 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2591 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2592 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2595 2000-02-22 Andrew Haley <aph@redhat.com>
2597 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2599 * mips-opc.c (G6): New define.
2600 (mips_builtin_op): Add "move" definition for -gp32.
2602 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2604 From Grant Erickson <gerickso@Brocade.COM>:
2605 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2607 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2609 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2612 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2614 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2615 (print_insn_ppi): Likewise.
2616 (print_insn_shx): Use info->mach to select appropriate insn set.
2617 Add support for sh-dsp. Remove FD_REG_N support.
2618 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2619 (sh_arg_type): Likewise. Remove FD_REG_N.
2620 (sh_dsp_reg_nums): New enum.
2621 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2622 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2623 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2624 (arch_sh3_dsp_up): Likewise.
2625 (sh_opcode_info): New field: arch.
2626 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2627 D_REG_N. Fill in arch field. Add sh-dsp insns.
2629 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2631 * arm-dis.c: Change flavor name from atpcs-special to
2632 special-atpcs to prevent name conflict in gdb.
2633 (get_arm_regname_num_options, set_arm_regname_option,
2634 get_arm_regnames): New functions. API to access the several
2635 flavor of register names. Note: Used by gdb.
2636 (print_insn_thumb): Use the register name entry from the currently
2637 selected flavor for LR and PC.
2639 2000-02-10 Nick Clifton <nickc@redhat.com>
2641 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2643 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2644 "mulsh.h" instructions.
2645 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2647 (print_insn_mcore): Add support for little endian targets.
2648 Add support for MULSH and OPSR classes.
2650 2000-02-07 Nick Clifton <nickc@redhat.com>
2652 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2653 Previous delat did not take.
2655 2000-02-03 Timothy Wall <twall@redhat.com>
2657 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2658 to adjust target address bounds checking and calculate the
2659 appropriate octet offset into data.
2661 2000-01-27 Nick Clifton <nickc@redhat.com>
2663 * arm-dis.c: (parse_disassembler_option): Rename to
2664 parse_arm_disassembler_option and allow to be exported.
2666 * disassemble.c (disassembler_usage): New function: Print out any
2667 target specific disassembler options.
2668 Call arm_disassembler_options() if the ARM architecture is being
2671 * arm-dis.c (NUM_ELEM): Define this macro if not already
2673 (arm_regname): New struct type for ARM register names.
2674 (arm_toggle_regnames): Delete.
2675 (parse_disassembler_option): Use register name structure.
2676 (print_insn): New function: Combines duplicate code found in
2677 print_insn_big_arm and print_insn_little_arm.
2678 (print_insn_big_arm): Call print_insn.
2679 (print_insn_little_arm): Call print_insn.
2680 (print_arm_disassembler_options): Display list of supported,
2681 ARM specific disassembler options.
2683 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2685 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2686 ARM_STT_16BIT flag as Thumb code symbols.
2688 * arm-dis.c (printf_insn_little_arm): Ditto.
2690 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2692 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2693 of raw thumb instructions.
2695 2000-01-20 Nick Clifton <nickc@redhat.com>
2697 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2699 2000-01-03 Nick Clifton <nickc@cygnus.com>
2701 * arm-dis.c (streq): New macro.
2702 (strneq): New macro.
2703 (force_thumb): ew local variable.
2704 (parse_disassembler_option): New function: Parse a single, ARM
2705 specific disassembler command line switch.
2706 (parse_disassembler_option): Call parse_disassembler_option to
2707 parse individual command line switches.
2708 (print_insn_big_arm): Check force_thumb.
2709 (print_insn_little_arm): Check force_thumb.
2711 For older changes see ChangeLog-9899
2717 version-control: never