1 2009-12-14 Nick Clifton <nickc@redhat.com>
4 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
5 results in unpredictable behaviour.
6 (print_insn_arm): Handle %R.
8 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
10 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
12 (print_insn): Don't set vex.w here.
14 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
16 * i386-dis.c (print_insn): Set vex.w to 0.
18 2009-12-11 Quentin Neill <quentin.neill@amd.com>
20 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
21 to avoid fetching ahead for the immediate bytes when OP_E_memory
22 has already been called. Fix indentation.
24 2009-12-11 Nick Clifton <nickc@redhat.com>
26 * Makefile.in: Regenerate.
27 * configure: Regenerate.
28 * arm-dis.c: Fix shadowed variable warnings.
29 * cgen-opc.c: Likewise.
30 * cr16-dis.c: Likewise.
31 * crx-dis.c: Likewise.
32 * d30v-dis.c: Likewise.
33 * fr30-dis.c: Likewise.
34 * frv-opc.c: Likewise.
35 * h8500-dis.c: Likewise.
36 * i386-dis.c: Likewise.
37 * i960-dis.c: Likewise.
38 * ia64-gen.c: Likewise.
39 * ia64-opc.c: Likewise.
40 * m32c-asm.c: Likewise.
41 * m32c-dis.c: Likewise.
42 * m68k-dis.c: Likewise.
43 * maxq-dis.c: Likewise.
44 * mcore-dis.c: Likewise.
45 * mep-asm.c: Likewise.
46 * microblaze-dis.c: Likewise.
47 * mmix-dis.c: Likewise.
48 * ns32k-dis.c: Likewise.
49 * or32-opc.c: Likewise.
50 * s390-dis.c: Likewise.
51 * sh64-dis.c: Likewise.
52 * spu-dis.c: Likewise.
53 * tic30-dis.c: Likewise.
55 2009-12-09 Nick Clifton <nickc@redhat.com>
58 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
59 post-indexed addressing as unpredictable.
61 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
63 * i386-dis.c (FXSAVE_Fixup): New.
65 (mod_table): Use FXSAVE on fxsave and fxrstor.
67 * i386-opc.tbl: Add fxsave64 and fxrstor64.
68 * i386-tbl.h: Regenerated.
70 2009-12-02 Nick Clifton <nickc@redhat.com>
71 Richard Earnshaw <rearnsha@arm.com>
74 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
77 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
80 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
83 2009-11-17 Quentin Neill <quentin.neill@amd.com>
84 Sebastian Pop <sebastian.pop@amd.com>
86 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
87 decoding the second source operand from the immediate byte.
88 (OP_EX_VexW): Pass an extra integer to identify the second
89 and third source arguments.
91 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
93 * i386-opc.tbl: Add IsLockable to cmpxch16b.
94 * i386-tbl.h: Regenerated.
96 2009-11-19 Nick Clifton <nickc@redhat.com>
99 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
100 decoding Immediaate Offset addressing.
102 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
105 * i386-dis.c (get_vex_imm8): Do not increment codep.
106 Avoid incrementing bytes_before_imm when OP_E_memory
107 has already forwarded the codep pointer.
108 (OP_EX_VexW): Increment codep to skip mod/rm byte.
110 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
112 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
113 (VEX_LEN_XOP_08_A1): Removed.
114 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
116 (vex_len_table): Same.
117 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
118 (cpu_flags): Remove field for CpuCVT16.
119 * i386-opc.h (CpuCVT16): Removed.
120 (i386_cpu_flags): Remove bitfield cpucvt16.
121 (i386-opc.tbl): Remove CVT16 instructions.
122 * i386-init.h: Regenerated.
123 * i386-tbl.h: Regenerated.
125 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
126 Quentin Neill <quentin.neill@amd.com>
128 * i386-dis.c (OP_Vex_2src_1): New.
129 (OP_Vex_2src_2): New.
133 (VEX_LEN_XOP_08_A0): Added.
134 (VEX_LEN_XOP_08_A1): Added.
135 (VEX_LEN_XOP_09_80): Added.
136 (VEX_LEN_XOP_09_81): Added.
137 (xop_table): Added an entry for XOP_08. Handle xop instructions.
138 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
139 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
140 (get_valid_dis386): Handle XOP_08.
142 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
143 (cpu_flags): Add CpuXOP and CpuCVT16.
144 (opcode_modifiers): Add XOP08, Vex2Sources.
145 * i386-opc.h (CpuXOP): Added.
147 (i386_cpu_flags): Add cpuxop and cpucvt16.
149 (Vex2Sources): Added.
150 (i386_opcode_modifier): Add xop08, vex2sources.
151 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
152 * i386-init.h: Regenerated.
153 * i386-tbl.h: Regenerated.
155 2009-11-17 Nick Clifton <nickc@redhat.com>
158 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
159 instruction variants. Add pattern for MRS variant that was being
161 (arm_decode_shift): Place error message in a comment.
162 (print_insn_arm): Note that writing back to the PC is
164 Only print 'p' variants of cmp/cmn/teq/tst instructions if
165 decoding for pre-V6 architectures.
167 2009-11-17 Edward Nevill <edward.nevill@arm.com>
169 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
171 2009-11-14 Doug Evans <dje@sebabeach.org>
173 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
175 * Makefile.in: Regenerate.
177 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
179 * i386-dis.c (OP_E_extended): Removed.
181 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
183 * i386-dis.c (print_insn): Check rex_ignored.
185 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
187 * i386-dis.c (ckprefix): Updated to return 0 if number of
188 prefixes > 14 and record the last position for each prefix.
189 (lock_prefix): Removed.
190 (data_prefix): Likewise.
191 (addr_prefix): Likewise.
192 (repz_prefix): Likewise.
193 (repnz_prefix): Likewise.
194 (last_lock_prefix): New.
195 (last_repz_prefix): Likewise.
196 (last_repnz_prefix): Likewise.
197 (last_data_prefix): Likewise.
198 (last_addr_prefix): Likewise.
199 (last_rex_prefix): Likewise.
200 (last_seg_prefix): Likewise.
201 (MAX_CODE_LENGTH): Likewise.
202 (ADDR16_PREFIX): Likewise.
203 (ADDR32_PREFIX): Likewise.
204 (DATA16_PREFIX): Likewise.
205 (DATA32_PREFIX): Likewise.
206 (REP_PREFIX): Likewise.
207 (seg_prefix): Likewise.
208 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
209 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
210 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
211 (get_valid_dis386): Updated.
213 (OP_Monitor): Likewise.
214 (REP_Fixup): Likewise.
215 (print_insn): Display all prefixes.
216 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
217 (intel_operand_size): Likewise.
218 (OP_E_register): Likewise.
221 (OP_IMREG): Likewise.
225 (CRC32_Fixup): Likewise.
226 (MOVBE_Fixup): Likewise.
227 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
229 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
230 used_prefixes only if it is used.
232 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
234 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
235 or, sbb, sub, xor and xchg with register only operands.
236 * i386-tbl.h: Regenerated.
238 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
240 * i386-gen.c (opcode_modifiers): Add IsLockable.
242 * i386-opc.h (IsLockable): New.
243 (i386_opcode_modifier): Add islockable.
245 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
246 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
248 * i386-tbl.h: Regenerated.
250 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
252 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
253 generic coprocessor instructions for FPA loads and stores.
254 (print_insn_coprocessor): Remove %C support. Display address for
255 PC-relative offsets in %A.
257 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
259 * i386-dis.c (all_prefixes): New.
260 (ckprefix): Set all_prefixes.
261 (print_insn): Print all_prefixes instead of lock_prefix,
262 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
264 2009-11-11 Nick Clifton <nickc@redhat.com>
267 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
268 (print_insn_arm): Extend %s format control code to check for
269 unpredictable addressing modes. Add support for %S format control
270 code which suppresses this check.
271 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
272 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
273 PRE_BIT_SET): New macros.
274 (print_insn_coprocessor): Use the new macros instead of magic
276 (print_arm_address): Likewise.
277 (pirnt_insn_arm): Likewise.
278 (print_insn_thumb32): Likewise.
280 2009-11-11 Nick Clifton <nickc@redhat.com>
282 * po/id.po: Updated Indonesian translation.
284 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
286 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
288 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
290 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
291 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
292 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
294 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
297 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
298 Quentin Neill <quentin.neill@amd.com>
300 * opcodes/i386-dis.c (OP_LWPCB_E): New.
303 (USE_XOP_8F_TABLE): New.
305 (REG_XOP_LWPCB): New.
309 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
310 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
312 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
313 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
314 to access to the vex_table.
318 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
319 (cpu_flags): Add CpuLWP.
320 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
321 * opcodes/i386-opc.h (CpuLWP): New.
322 (i386_cpu_flags): Add bit cpulwp.
326 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
327 * opcodes/i386-opc.tbl (llwpcb): Added.
331 2009-11-04 DJ Delorie <dj@redhat.com>
333 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
334 (mvtcp, mvfcp, opecp): Remove.
335 * rx-decode.c: Regenerate.
336 * rx-dis.c (cpen): Remove.
338 2009-11-03 Doug Evans <dje@sebabeach.org>
340 * m32c-desc.c: Regenerate.
341 * mep-desc.c: Regenerate.
343 2009-11-02 Paul Brook <paul@codesourcery.com>
345 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
346 Add VFPv4 instructions.
348 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
350 * i386-dis.c (OP_VEX_FMA): Removed.
352 (Vex128FMA): Removed.
353 (prefix_table): First source operand of FMA4 insns is decoded
354 with Vex not with VexFMA.
355 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
356 when vex.w is set. Third source operand is decoded with
358 2009-10-27 Alan Modra <amodra@bigpond.net.au>
360 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
361 * Makefile.in: Regenerate.
362 * po/POTFILES.in: Regenerate.
364 2009-10-23 Doug Evans <dje@sebabeach.org>
366 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
367 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
368 * cgen-bitset.c: Update.
369 * fr30-desc.h: Regenerate.
370 * frv-desc.h: Regenerate.
371 * ip2k-desc.h: Regenerate.
372 * iq2000-desc.h: Regenerate.
373 * lm32-desc.h: Regenerate.
374 * m32c-desc.h: Regenerate.
375 * m32c-opc.h: Regenerate.
376 * m32r-desc.h: Regenerate.
377 * mep-desc.h: Regenerate.
378 * mt-desc.h: Regenerate.
379 * openrisc-desc.h: Regenerate.
380 * xc16x-desc.h: Regenerate.
381 * xstormy16-desc.h: Regenerate.
383 2009-10-22 DJ Delorie <dj@redhat.com>
385 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
386 * rx-decode.c: Regenerated.
388 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
391 * i386-dis.c: Document LB, LS and LV macros.
392 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
393 with the 64-bit displacement or immediate operand.
394 (putop): Handle LB, LS and LV macros.
396 2009-10-18 Doug Evans <dje@sebabeach.org>
398 * lm32-opinst.c: Regenerate.
399 * m32c-desc.c: Regenerate.
400 * m32r-opinst.c: Regenerate.
401 * openrisc-ibld.c: Regenerate.
402 * xc16x-desc.c: Regenerate.
403 * xc16x-desc.h: Regenerate.
405 2009-10-17 Doug Evans <dje@sebabeach.org>
407 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
408 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
409 sorted alphabetically.
410 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
411 stamp-* rules are sorted alphabetically.
412 * Makefile.in: Regenerate.
414 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
416 * i386-opc.h: Use enum instead of nested macros.
418 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
420 * i386-dis.c: Simplify enums.
422 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
423 Ineiev <ineiev@gmail.com>
426 * i386-dis.c: Use enum instead of nested macros.
428 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
430 * i386-dis.c (MAX_BYTEMODE): Removed.
432 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
435 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
437 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
439 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
442 2009-10-07 Michael Eager <eager@eagercon.com>
444 * microblaze-dis.c: Add include for microblaze-dis.h,
445 eliminate local extern decls.
446 * microblaze-dis.h: New.
448 2009-10-06 Nick Clifton <nickc@redhat.com>
450 * po/fi.po: Updated Finnish translation.
452 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
454 * opc2c.c: Include "libiberty.h" and <errno.h>.
455 (orig_filename): Constify.
456 (dump_lines): Fix line number directive.
457 (main): Set orig_filename to basename of input file. Use
460 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
461 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
462 instead of $(EXEEXT).
463 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
464 $(LINK_FOR_BUILD). Link with libiberty.
465 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
466 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
467 * Makefile.in: Regenerated.
468 * rx-decode.c: Regenerated.
470 2009-10-03 Paul Reed <paulreed@paddedcell.com>
472 * arm-dis.c (print_insn): Check symtab_size not *symtab.
474 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
476 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
477 * i386-tbl.h: Regenerated.
479 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
481 * ppc-dis.c (ppc_opts): Add "476" entry.
482 * ppc-opc.c (PPC476): Define.
483 (powerpc_opcodes): Update mnemonics where required for 476.
485 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
487 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
488 * ppc-dis.c (ppc_opts): Likewise.
489 Rename "ppca2" to "a2".
491 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
493 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
495 2009-09-29 DJ Delorie <dj@redhat.com>
497 * Makefile.am: Add RX files.
498 * configure.in: Add support for RX target.
499 * disassemble.c: Likewise.
500 * Makefile.in: Regenerate.
501 * configure: Regenerate.
503 * rx-decode.c: New file.
504 * rx-decode.opc: New file.
505 * rx-dis.c: New file.
507 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
509 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
510 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
512 2009-09-25 Michael Eager <eager@eagercon.com>
514 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
515 microblaze_decode_insn): Add declarations.
516 (get_delay_slots_microblaze): Remove.
518 2009-09-25 Martin Thuresson <martint@google.com>
520 Update sources to make arc and arm targets compile cleanly with
522 * arc-dis.c Fix casts.
523 * arc-ext.c: Add casts.
524 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
527 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
529 * i386-gen.c (opcode_modifiers): Remove Vex256.
530 (set_bitfield): Handle XXX=V.
532 * i386-opc.h (Vex): Update comments.
535 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
537 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
538 * i386-tbl.h: Regenerated.
540 2009-09-23 Nick Clifton <nickc@redhat.com>
542 * po/fr.po: Updated French translation.
544 2009-09-21 Ben Elliston <bje@au.ibm.com>
545 Peter Bergner <bergner@vnet.ibm.com>
547 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
548 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
549 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
550 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
552 (ERAT_T): New operand.
553 (XWC_MASK): New mask.
557 2009-09-18 Nick Clifton <nickc@redhat.com>
559 * po/es.po: Updated Spanish translation.
560 * po/vi.po: Updated Vietnamese translation.
562 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
564 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
567 2009-09-14 Nick Clifton <nickc@redhat.com>
569 * po/nl.po: Updated Dutch translation.
571 2009-09-11 Nick Clifton <nickc@redhat.com>
573 * po/opcodes.pot: Updated by the Translation project.
575 2009-09-11 Martin Thuresson <martint@google.com>
577 Updated sources to compile cleanly with -Wc++-compat:
578 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
579 * ldcref.c: Add casts.
580 * ldctor.c: Add casts.
582 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
583 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
584 * ldlang.h (enum statement_enum): Move to top level.
585 * ldmain.c: Add casts.
586 * ldwrite.c: Add casts.
587 * lexsup.c: Add casts. (enum control_enum): Move to top level.
588 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
590 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
592 * s390-dis.c (print_insn_s390): Avoid 'long long'.
594 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
596 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
597 (print_insn_s390): Signextend and shift pcrel operands before printing.
599 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
601 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
602 VEX_LEN_AE_R_X_M_0 in comments.
604 2009-09-08 DJ Delorie <dj@redhat.com>
606 * mep-opc.c: Regenerate.
608 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
610 * z8kgen.c (struct op): Replace unused flavor with id.
611 (opt): Remove extra xorb entry.
612 (func): Use id field as fallback.
613 (sub): Return new string, caller changed.
614 (internal): Allocate end marker. Assign unique id before sorting.
615 (gas): Likewise. Fix loop end condition.
616 * z8k-opc.h: Regenerate.
618 2009-09-08 Alan Modra <amodra@bigpond.net.au>
620 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
622 2009-09-07 Alan Modra <amodra@bigpond.net.au>
624 * z8kgen.c (func): Fix thinko last patch.
626 2009-09-07 Alan Modra <amodra@bigpond.net.au>
628 * z8kgen.c (func): Stabilize qsort of identically named entries.
629 * z8k-opc.h: Regenerate.
631 2009-09-07 Tristan Gingold <gingold@adacore.com>
633 * po/opcodes.pot: Regenerate.
635 2009-09-07 Alan Modra <amodra@bigpond.net.au>
637 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
638 * configure: Regenerate.
639 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
640 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
641 (i386-gen, ia64-gen, z8kgen): ..here.
642 * Makefile.in: Regenerate.
644 2009-09-07 Tristan Gingold <gingold@adacore.com>
646 * z8k-opc.h: Regenerate.
648 2009-09-05 Martin Thuresson <martin@mtme.org>
650 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
651 * m88k-dis.c (m88kdis): Rename variable class to in_class.
652 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
653 Rename argument class to symbol_class.
655 2009-09-04 Jie Zhang <jie.zhang@analog.com>
657 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
658 to the new encoding of DBGA, DBGAH, and DBGAL.
659 (_print_insn_bfin): Likewise.
661 2009-09-03 Jie Zhang <jie.zhang@analog.com>
663 * bfin-dis.c (_print_insn_bfin): Don't declare.
664 (print_insn_bfin): Don't declare.
665 (dregs_pair): Remove.
666 (ignore_bits): Remove.
669 2009-09-03 Jie Zhang <jie.zhang@analog.com>
671 * bfin-dis.c (IS_DREG): Define.
677 (decode_REGMV_0): Check illegal register move instructions.
679 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
681 * Makefile.am (BUILD_LIBINTL): New variable.
682 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
683 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
684 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
685 * Makefile.in: Regenerate.
687 2009-09-01 DJ Delorie <dj@redhat.com>
689 * mep-asm.c: Regenerate.
690 * mep-desc.c: Regenerate.
691 * mep-opc.c: Regenerate.
693 2009-09-01 Tristan Gingold <gingold@adacore.com>
695 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
696 dependencies. Remove unused FORMAT variable.
697 * configure.com: New file to create build.com DCL script for
698 Itanium VMS or Alpha VMS.
700 2009-08-29 Martin Thuresson <martin@mtme.org>
702 * cris-dis.c (bytes_to_skip): Update code to use new name.
703 * i386-dis.c (putop): Update code to use new name.
704 * i386-gen.c (process_i386_opcodes): Update code to use
706 * i386-opc.h (struct template): Rename struct template to
707 insn_template. Update code accordingly.
708 * i386-tbl.h (i386_optab): Update type to use new name.
709 * ia64-dis.c (print_insn_ia64): Rename variable template
711 * tic30-dis.c (struct instruction, get_tic30_instruction):
712 Update code to use new name.
713 * tic54x-dis.c (has_lkaddr, get_insn_size)
714 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
715 Update code to use new name.
716 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
717 Update type to new name.
718 * z8kgen.c (internal, gas): Rename variable new to new_op.
720 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
722 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
723 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
724 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
725 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
726 * Makefile.in: Regenerated.
728 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
730 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
731 [INSTALL_LIBBFD]: ... here, ...
732 [INSTALL_LIBBFD]: ... and empty overrides here.
733 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
734 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
735 * Makefile.in: Regenerate.
736 * configure: Regenerate.
738 2009-08-26 Philippe De Muyter <phdm@macqel.be>
740 * m68k-dis.c (print_insn_arg): Add movecr register names for
741 coldfire v4e families.
743 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
745 * Makefile.am (SUBDIRS): Build '.' before 'po'.
746 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
747 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
748 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
749 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
750 (i386-gen.o): New rule.
751 ($(srcdir)/i386-init.h): Adjust.
752 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
753 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
754 (ia64-gen.o): New rule.
755 (ia64_asmtab_deps): New variable.
756 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
757 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
758 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
760 (s390-opc.tab): Adjust.
761 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
763 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
764 * Makefile.in: Regenerate.
765 * z8kgen.c (gas): Avoid '/*' in comment.
766 * z8k-opc.h (func): Regenerate.
768 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
770 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
771 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
772 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
773 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
775 (LIBOPCODES_CFILES): New variable, adding to
776 TARGET_LIBOPCODES_CFILES also non-target library sources.
777 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
779 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
780 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
781 * Makefile.in: Regenerate.
782 * po/POTFILES.in: Regenerate.
784 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
786 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
787 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
788 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
789 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
790 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
791 is built shared even if it is not to be installed.
792 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
793 (install_libopcodes, uninstall_libopcodes): Remove.
794 (AM_CPPFLAGS): Renamed from ...
795 (INCLUDES): ... this.
796 * Makefile.in: Regenerate.
798 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
799 1.11, foreign, no-dist.
800 (MKDEP, m32c_opc_h): Remove variables.
801 (disassemble.lo): Rewrite using automake-style dependency
802 tracking rules; only list the dependency upon the primary source
803 file, but no included headers.
804 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
805 (i386-gen.o, ia64-gen.o): Remove dependency statements.
806 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
807 ensure all dependency fragments are included in the Makefile.
808 (s390-opc.lo): Depend on s390-opc.tab.
809 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
810 (mkdep section): Remove.
811 * Makefile.in: Regenerate.
812 * po/POTFILES.in: Regenerate.
814 * Makefile.am (install-pdf, install-html): Remove.
815 * Makefile.in: Regenerate.
817 * Makefile.in: Regenerate.
818 * aclocal.m4: Likewise.
819 * config.in: Likewise.
820 * configure: Likewise.
822 2009-08-06 Michael Eager <eager@eagercon.com>
824 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
825 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
826 * Makefile.in: Regenerate.
827 * configure.in: Add bfd_microblaze_arch target.
828 * configure: Regenerate.
829 * disassemble.c: Define ARCH_microblaze, return
830 print_insn_microblaze().
831 * microblaze-dis.c: New MicroBlaze disassembler.
832 * microblaze-opc.h: New MicroBlaze opcode definitions.
833 * microblaze-opcm.h: New MicroBlaze opcode types.
835 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
837 * configure.in: Handle bfd_l1om_arch.
838 * disassemble.c (disassembler): Likewise.
840 * configure: Regenerated.
842 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
843 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
845 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
847 (cpu_flags): Add CpuL1OM.
848 (set_bitfield): Take an argument to set the value field.
849 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
850 (process_i386_opcode_modifier): Updated.
851 (process_i386_operand_type): Likewise.
852 * i386-init.h: Regenerated.
853 * i386-tbl.h: Likewise.
855 * i386-opc.h (CpuL1OM): New.
857 (i386_cpu_flags): Add cpul1om.
859 2009-07-24 Jan Beulich <jbeulich@novell.com>
861 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
863 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
864 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
865 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
866 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
868 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
870 * i386-opc.tbl: Qualify floating point instructions by their
871 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
872 and fsincos to be avilable only on 387. Fix fstsw ax to be
873 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
875 * i386-init.h, i386-tbl.h: Regenerate.
877 2009-07-20 Nick Clifton <nickc@redhat.com>
880 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
881 offset or indexed based addressing mode 3.
883 2009-07-14 Nick Clifton <nickc@redhat.com>
886 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
888 (arm_decode_shift): Catch illegal register based shifts.
889 (print_insn_arm): Properly handle negative register r0
890 post-indexed addressing.
892 2009-07-10 Doug Kwan <dougkwan@google.com>
894 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
895 lower 32 bits of long types to make hexadecimal output consistent
896 on both 32-bit and 64-bit hosts.
898 2009-07-10 Alan Modra <amodra@bigpond.net.au>
900 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
901 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
902 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
903 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
904 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
905 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
906 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
907 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
908 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
909 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
910 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
911 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
913 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
915 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
917 2009-07-07 Nick Clifton <nickc@redhat.com>
920 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
923 2009-07-06 DJ Delorie <dj@redhat.com>
925 * mep-desc.c: Regenerate.
926 * mep-desc.h: Regenerate.
927 * mep-opc.c: Regenerate.
928 * mep-opc.h: Regenerate.
930 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
932 * i386-opc.h (CpuFMA4): Add CpuFMA4.
933 (i386_cpu_flags): New.
934 * i386-gen.c: Add CPU_FMA4_FLAGS.
935 * i386-opc.tbl: Add FMA4 instructions.
936 * i386-tbl.h: Regenerate.
937 * i386-init.h: Regenerate.
938 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
939 (OP_XMM_VexW): Ditto.
941 (VEXI4_Fixup): Ditto.
942 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
943 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
944 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
945 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
946 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
947 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
948 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
949 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
950 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
951 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
952 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
953 (get_vex_imm8): New. handle FMA4.
954 (OP_EX_VexReg): Ditto.
956 2009-06-30 Nick Clifton <nickc@redhat.com>
959 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
960 LFM and SFM instructions as comments,.
961 Improve consistency of formatting for instructions displayed as
962 comments and decimal values displayed with their hexadecimal
966 2009-06-29 Nick Clifton <nickc@redhat.com>
969 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
970 boundary between variaant and generic coprocessor instuctions.
971 (coprocessor): Use it.
972 Fix architecture version of MCRR and MRRC instructions.
973 (arm_opcdes): Fix patterns for STRB and STRH instructions.
974 (print_insn_coprocessor): Check architecture and extension masks.
975 Print a hexadecimal version of any decimal constant that is
976 outside of the range of -16 to +32.
977 (print_arm_address): Add a return value of the offset used in the
978 adress, if it is worth printing a hexadecimal version of it.
979 (print_insn_neon): Print a hexadecimal version of any decimal
980 constant that is outside of the range of -16 to +32.
981 (print_insn_arm): Likewise.
982 (print_insn_thumb16): Likewise.
983 (print_insn_thumb32): Likewise.
986 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
987 of an undefined instruction.
988 (arm_opcodes): Use it.
989 (thumb_opcod): Use it.
990 (thumb32_opc): Use it.
992 2009-06-23 DJ Delorie <dj@redhat.com>
994 * mep-desc.c: Regenerate.
995 * mep-desc.h: Regenerate.
996 * mep-dis.c: Regenerate.
997 * mep-ibld.c: Regenerate.
998 * mep-opc.c: Regenerate.
1000 * mep-asm.c: Regenerate.
1001 * mep-opc.c: Regenerate.
1002 * mep-opc.h: Regenerate.
1004 2009-06-22 Nick Clifton <nickc@redhat.com>
1006 * po/fi.po: Updated Finish translation.
1008 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1010 * m32c-asm.c: Regenerate.
1012 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1014 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1015 case label to proper lexical block.
1016 * score7-dis.c (print_insn_score32): Likewise.
1018 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1020 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1021 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1022 * s390-opc.txt (nopr, nop): Use new instruction format.
1024 2009-06-18 Nick Clifton <nickc@redhat.com>
1027 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1028 ARM architecture supports the matched instruction.
1029 (print_insn_arm): Likewise.
1030 (select_arm_features): New function. Fills in the fields of an
1031 arm_feature_set structure based on a given arm machine number.
1032 (print_insn): Initialise an arm_feature_set structure.
1034 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1036 * vax-dis.c (is_function_entry): Return success for synthetic
1038 (is_plt_tail): New function.
1039 (print_insn_vax): Decode PLT entry offset longword.
1041 2009-06-15 Nick Clifton <nickc@redhat.com>
1044 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1048 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1050 2009-06-15 Nick Clifton <nickc@redhat.com>
1053 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1054 the disassembly of data as well as instructions.
1056 2009-06-11 Doug Evans <dje@sebabeach.org>
1058 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1060 2009-06-11 Anthony Green <green@moxielogic.com>
1062 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1063 (moxie_form3_opc_info): Add branch instructions.
1064 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1065 encoded instructions.
1067 2009-06-06 Anthony Green <green@moxielogic.com>
1069 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1070 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1072 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1074 * dep-in.sed: Don't use \n in replacement part of s command.
1075 * Makefile.am (DEP1): LC_ALL for uniq.
1076 * Makefile.in: Regenerate.
1078 2009-06-02 Nick Clifton <nickc@redhat.com>
1080 * po/nl.po: Updated Dutch translation.
1082 2009-06-02 Tristan Gingold <gingold@adacore.com>
1084 * ia64-gen.c (parse_resource_users, print_dependency_table,
1085 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1086 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1087 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1088 insert_completer_entry, print_completer_entry, print_completer_table,
1089 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1091 2009-05-28 DJ Delorie <dj@redhat.com>
1093 * mep-asm.c: Regenerate.
1094 * mep-desc.c: Regenerate.
1096 2009-05-26 DJ Delorie <dj@redhat.com>
1098 * mep-asm.c: Regenerate.
1099 * mep-desc.c: Regenerate.
1100 * mep-desc.h: Regenerate.
1101 * mep-dis.c: Regenerate.
1102 * mep-ibld.c: Regenerate.
1103 * mep-opc.c: Regenerate.
1104 * mep-opc.h: Regenerate.
1106 2009-05-26 Nick Clifton <nickc@redhat.com>
1108 * po/id.po: Updated Indonesian translation.
1109 * po/opcodes.pot: Updated template file.
1111 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1113 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1114 per line with all lines having continuation backslash. Prefix
1115 first line with "A", following lines with "B".
1116 * Makefile.am (DEP): Don't use dep.sed here.
1117 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1118 dep.sed here on dependencies, sort and uniq.
1119 * Makefile.in: Regenerate.
1121 2009-05-25 Tristan Gingold <gingold@adacore.com>
1123 * makefile.vms (OPT): New variable.
1124 (CFLAGS): Update compilation flags.
1126 2009-05-22 DJ Delorie <dj@redhat.com>
1128 * mep-asm.c: Regenerate.
1129 * mep-desc.c: Regenerate.
1130 * mep-desc.h: Regenerate.
1131 * mep-dis.c: Regenerate.
1132 * mep-ibld.c: Regenerate.
1133 * mep-opc.c: Regenerate.
1134 * mep-opc.h: Regenerate.
1136 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1138 * i386-opc.h (Cpusse5): Delete.
1139 (i386_cpu_flags): Delete.
1140 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1141 * i386-opc.tbl: Remove SSE5 instructions.
1142 * i386-tbl.h: Regenerate.
1143 * i386-init.h: Regenerate.
1144 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1145 (print_drex_arg): Delete.
1148 (OP_DREX_ICMP): Delete.
1149 (OP_DREX_FCMP): Delete.
1151 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1153 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1155 * Makefile.am: Run "make dep-am".
1156 * Makefile.in: Regenerate.
1157 * po/POTFILES.in: Regenerate.
1159 2009-05-19 DJ Delorie <dj@redhat.com>
1161 * mep-asm.c: Regenerate.
1162 * mep-opc.c: Regenerate.
1164 2009-04-30 DJ Delorie <dj@redhat.com>
1166 * mep-asm.c: Regenerate.
1167 * mep-desc.c: Regenerate.
1168 * mep-desc.h: Regenerate.
1169 * mep-dis.c: Regenerate.
1170 * mep-ibld.c: Regenerate.
1171 * mep-opc.c: Regenerate.
1172 * mep-opc.h: Regenerate.
1174 2009-04-17 DJ Delorie <dj@redhat.com
1176 * mep-desc.c: Regenerate.
1177 * mep-ibld.c: Regenerate.
1178 * mep-opc.c: Regenerate.
1179 * mep-opc.h: Regenerate.
1181 2009-04-15 Anthony Green <green@moxielogic.com>
1183 * moxie-opc.c, moxie-dis.c: Created.
1184 * Makefile.am: Build the moxie source files.
1185 * configure.in: Add moxie support.
1186 * Makefile.in, configure: Rebuilt.
1187 * disassemble.c (disassembler): Add moxie support.
1188 (ARCH_moxie): Define.
1190 2009-04-15 Jan Beulich <jbeulich@novell.com>
1192 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1194 (pshab, pshaw, pshad, pshaq): Likewise.
1195 * i386-tbl.h: Re-generate.
1197 2009-04-08 DJ Delorie <dj@redhat.com
1199 * mep-asm.c: Regenerate.
1200 * mep-desc.c: Regenerate.
1201 * mep-desc.h: Regenerate.
1202 * mep-dis.c: Regenerate.
1203 * mep-ibld.c: Regenerate.
1204 * mep-opc.c: Regenerate.
1205 * mep-opc.h: Regenerate.
1207 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1209 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1210 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1211 Reorder entries so the extended mnemonics are listed before tlbilx.
1213 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1215 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1217 (print_insn_powerpc): Make sure we only deprecate instructions using
1218 the original dialect and not a modified dialect due to -Many handling.
1219 Move the handling of the condition register and default operands to
1220 the end of the if/else if/else chain.
1221 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1222 instructions from newer processors are listed before older ones.
1223 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1224 that have instructions with conflicting opcodes.
1226 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1228 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1231 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1233 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1235 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1237 * arm-dis.c (print_insn): Also check section matches in backwards
1238 search for mapping symbol.
1240 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1242 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1244 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1246 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1247 * Makefile.am: Run "make dep-am".
1248 * Makefile.in: Regenerate.
1249 * openrisc-opc.c: Regenerate.
1251 2009-03-10 Nick Clifton <nickc@redhat.com>
1253 * po/id.po: Updated Indonesian translation.
1255 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1257 * ppc-dis.c: Include "opintl.h".
1258 (struct ppc_mopt, ppc_opts): New.
1259 (ppc_parse_cpu): New function.
1260 (powerpc_init_dialect): Use it.
1261 (print_ppc_disassembler_options): Dump options from ppc_opts.
1262 Internationalize message.
1264 2009-03-06 Nick Clifton <nickc@redhat.com>
1266 * po/es.po: Updated Spanish translation.
1268 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1271 * configure.in: Test for ld --as-needed support. Link shared
1272 libopcodes against libm.
1273 * configure: Regenerate.
1275 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1277 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1278 instructions from newer processors are listed before older ones.
1280 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1282 * Makefile.am: Run "make dep-am".
1283 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1285 * Makefile.in: Regenerate.
1287 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1289 * score7-dis.c: New file.
1290 * Makefile.am: Add dependencies for score7-dis.c.
1291 * Makefile.in: Regenerate.
1292 * configure.in: Add score7-dis to score files.
1293 * configure: Regenerate.
1294 * score-dis.c: Add support for score7 architecture.
1295 * score-opc.h: Likewise.
1297 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1299 * configure: Regenerate.
1301 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1303 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1305 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1307 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1308 the power7 and the isel instructions.
1309 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1310 (insert_dm, extract_dm): Likewise.
1311 (XB6): Update comment to include XX2 form.
1312 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1313 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1314 (RemoveXX3DM): Delete.
1315 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1316 "mftgpr">: Deprecate for POWER7.
1317 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1318 "frsqrte.">: Deprecate the three operand form and enable the two
1319 operand form for POWER7 and later.
1320 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1321 <"waitsrv", "waitimpl">: Add extended opcodes.
1322 <"ldbrx", "stdbrx">: Enable for POWER7.
1323 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1324 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1325 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1326 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1327 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1328 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1329 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1330 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1331 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1332 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1333 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1334 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1335 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1336 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1337 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1338 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1339 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1340 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1341 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1342 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1343 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1344 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1345 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1346 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1347 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1348 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1349 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1350 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1351 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1352 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1353 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1354 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1355 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1356 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1357 "xxspltw", "xxswapd">: Add VSX opcodes.
1359 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1361 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1362 (operand_types): Remove Vex_Imm4.
1364 * i386-opc.h (Vex_Imm4): Removed.
1366 (i386_operand_type): Remove vex_imm4.
1368 * i386-opc.tbl: Remove Vex_Imm4 comments.
1369 * i386-init.h: Regenerated.
1370 * i386-tbl.h: Likewise.
1372 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1374 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1375 vq{r}shr{u}n.s64 insnstructions.
1377 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1379 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1380 operand to be a float point register (FRT/FRS).
1382 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1384 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1385 dmfc2 and dmtc2 before the architecture-level variants.
1387 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1389 * fr30-opc.c: Regenerate.
1390 * frv-opc.c: Regenerate.
1391 * ip2k-opc.c: Regenerate.
1392 * iq2000-opc.c: Regenerate.
1393 * lm32-opc.c: Regenerate.
1394 * m32c-opc.c: Regenerate.
1395 * m32r-opc.c: Regenerate.
1396 * mep-opc.c: Regenerate.
1397 * mt-opc.c: Regenerate.
1398 * xc16x-opc.c: Regenerate.
1399 * xstormy16-opc.c: Regenerate.
1400 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1403 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1405 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1407 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1409 * ppc-opc.c: Update copyright year.
1410 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1411 ordering for POWER4 and later and use the correct Server ordering.
1413 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1415 AVX Programming Reference (January, 2009)
1416 * i386-dis.c (PREFIX_VEX_3A44): New.
1417 (VEX_LEN_3A44_P_2): Likewise.
1418 (PREFIX_VEX_3A48): Updated.
1419 (VEX_LEN_3A4C_P_2): Likewise.
1420 (prefix_table): Add PREFIX_VEX_3A44.
1421 (vex_table): Likewise.
1422 (vex_len_table): Add VEX_LEN_3A44_P_2.
1424 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1425 * i386-tbl.h: Regenerated.
1427 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1429 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1430 (mips_arch_choices): Add XLR entry.
1431 * mips-opc.c (XLR): Define.
1432 (mips_builtin_opcodes): Add XLR instructions.
1434 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1436 * Makefile.am: Add install-pdf target.
1437 * po/Make-in: Add install-pdf target.
1438 * Makefile.in: Regenerate.
1440 2009-02-02 DJ Delorie <dj@redhat.com>
1442 * mep-asm.c: Regenerate.
1443 * mep-desc.c: Regenerate.
1444 * mep-desc.h: Regenerate.
1445 * mep-dis.c: Regenerate.
1446 * mep-ibld.c: Regenerate.
1447 * mep-opc.c: Regenerate.
1448 * mep-opc.h: Regenerate.
1450 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1452 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1455 2009-01-28 Chao-ying Fu <fu@mips.com>
1457 * mips-opc.c (suxc1): Add the flag of FP_D.
1459 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1461 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1462 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1463 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1464 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1465 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1466 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1467 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1468 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1470 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1472 * configure.in (commonbfdlib): Delete.
1473 (SHARED_LIBADD): Add pic libiberty if such is available.
1474 * configure: Regenerate.
1475 * po/POTFILES.in: Regenerate.
1477 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1479 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1480 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1481 operand form and enable the four operand form for POWER6 and later.
1482 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1483 three operand form for POWER6 and later.
1485 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1487 * bfin-dis.c (OUTS): Use "%s" as format string.
1489 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1491 * i386-gen.c (cpu_flag_init): Remove a white space.
1492 (operand_type_init): Likewise.
1494 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1496 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1497 * i386-tbl.h: Regenerated.
1499 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1501 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1502 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1503 subS, xorS and cmpS.
1505 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1507 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1508 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1509 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1510 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1513 (set_bitfield): Take an argument, lineno. Don't report lineno
1514 on error if it is -1.
1515 (process_i386_cpu_flag): Take an argument, lineno.
1516 (process_i386_opcode_modifier): Likewise.
1517 (process_i386_operand_type): Likewise.
1518 (output_i386_opcode): Likewise.
1519 (opcode_hash_entry): Add lineno.
1520 (process_i386_opcodes): Updated.
1521 (process_i386_registers): Likewise.
1522 (process_i386_initializers): Likewise.
1524 * i386-opc.h (CpuP4): Removed.
1528 (CpuSYSCALL): Likewise.
1530 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1531 cpuclflush and cpusyscall.
1533 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1535 * i386-init.h: Regenerated.
1536 * i386-tbl.h: Likewise.
1538 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1540 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1541 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1542 (cpu_flags): Add CpuRdtscp.
1543 (set_bitfield): Remove CpuSledgehammer check.
1545 * i386-opc.h (CpuRdtscp): New.
1547 (i386_cpu_flags): Add cpurdtscp.
1549 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1550 * i386-init.h: Regenerated.
1551 * i386-tbl.h: Likewise.
1553 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1555 * ppc-opc.c (PPCNONE): Define.
1557 (powerpc_opcodes): Initialize the new "deprecated" field.
1559 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1561 AVX Programming Reference (December, 2008)
1562 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1563 (VEX_LEN_E7_P_2_M_0): Likewise.
1564 (VEX_LEN_2C_P_1): Updated.
1565 (VEX_LEN_E8_P_2): Likewise.
1566 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1567 (mod_table): Likewise.
1569 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1570 * i386-tbl.h: Regenerated.
1572 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1574 * i386-gen.c (process_copyright): Update for 2009.
1576 * i386-init.h: Regenerated.
1577 * i386-tbl.h: Likewise.
1579 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1581 AVX Programming Reference (December, 2008)
1582 * i386-dis.c (OP_VEX_FMA): Removed.
1583 (OP_EX_VexW): Likewise.
1584 (OP_EX_VexImmW): Likewise.
1585 (OP_XMM_VexW): Likewise.
1586 (VEXI4_Fixup): Likewise.
1587 (VPERMIL2_Fixup): Likewise.
1590 (Vex128FMA): Likewise.
1592 (EXdVexW): Likewise.
1593 (EXqVexW): Likewise.
1594 (EXVexImmW): Likewise.
1596 (VPERMIL2): Likewise.
1597 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1598 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1599 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1600 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1601 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1602 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1603 (get_vex_imm8): Likewise.
1604 (OP_EX_VexReg): Likewise.
1605 vpermil2_op): Likewise.
1607 (vex_w_dq_mode): Likewise.
1608 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1609 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1610 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1612 (PREFIX_VEX_38DB): Likewise.
1613 (PREFIX_VEX_3A4A): Likewise.
1614 (PREFIX_VEX_3A60): Likewise.
1615 (PREFIX_VEX_3ADF): Likewise.
1616 (VEX_LEN_3ADF_P_2): Likewise.
1617 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1618 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1619 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1620 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1621 PREFIX_VEX_3896...PREFIX_VEX_389F,
1622 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1623 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1624 (vex_table): Likewise.
1625 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1626 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1627 (putop): Support "%XW".
1628 (intel_operand_size): Handle vex_w_dq_mode.
1630 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1632 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1633 instructions. Add new FMA instructions.
1634 * i386-tbl.h: Regenerated.
1636 2009-01-02 Matthias Klose <doko@ubuntu.com>
1638 * or32-opc.c (or32_print_register, or32_print_immediate,
1639 disassemble_insn): Don't rely on undefined sprintf behaviour.
1641 For older changes see ChangeLog-2008
1647 version-control: never