1 2002-07-09 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3 * mips-dis.c (mips_isa_type): Add MIPS16 insn handling.
4 * mips-opc.c (I16): New define.
5 (mips_builtin_opcodes): Make jalx an I16 insn.
7 2002-06-18 Dave Brolley <brolley@redhat.com>
9 * po/POTFILES.in: Add frv-*.[ch].
10 * disassemble.c (ARCH_frv): New macro.
11 (disassembler): Handle bfd_arch_frv.
12 * configure.in: Support frv_bfd_arch.
13 * Makefile.am (HFILES): Add frv-*.h.
15 (ALL_MACHINES): Add frv-*.lo.
16 (CLEANFILES): Add stamp-frv.
17 (FRV_DEPS): New variable.
18 (stamp-frv): New target.
19 (frv-asm.lo): New target.
20 (frv-desc.lo): New target.
21 (frv-dis.lo): New target.
22 (frv-ibld.lo): New target.
23 (frv-opc.lo): New target.
24 (frv-*.[ch]): New files.
26 2002-06-18 Ben Elliston <bje@redhat.com>
28 * Makefile.am (CGENDEPS): Remove unnecessary stamp-cgen.
29 * Makefile.in: Regenerate.
31 2002-06-08 Alan Modra <amodra@bigpond.net.au>
33 * a29k-dis.c: Replace CONST with const.
34 * h8300-dis.c: Likewise.
35 * m68k-dis.c: Likewise.
36 * or32-dis.c: Likewise.
37 * sparc-dis.c: Likewise.
39 2002-06-04 Jason Thorpe <thorpej@wasabisystems.com>
41 * configure.in: Add "sh5*-*" to list of targets which include
43 * configure: Regenerate.
45 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
47 * mips-opc.c: Clean up a few whitespace issues, and sort a
48 few entries understanding that 'x' follows 'w' in the alphabet.
50 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
51 Ed Satterthwaite <ehs@broadcom.com>
53 * mips-opc.c: Add support for SB-1 MDMX subset and extensions.
55 2002-05-31 Alan Modra <amodra@bigpond.net.au>
57 * Makefile.am: Run "make dep-am".
58 * Makefile.in: Regenerate.
59 * po/POTFILES.in: Regenerate.
61 2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
62 Ed Satterthwaite <ehs@broadcom.com>
64 * mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
65 and 'Z' formats, for MDMX.
66 (mips_isa_type): Add MDMX instructions to the ISA
67 bit mask for bfd_mach_mipsisa64.
68 * mips-opc.c: Add support for MDMX instructions.
71 * mips-dis.c: Update copyright years to include 2002.
73 2002-05-30 Diego Novillo <dnovillo@redhat.com>
75 * d10v-opc.c (d10v_opcodes): `btsti' does not modify its
78 2002-05-28 Kuang Hwa Lin <kuang@sbcglobal.net>
80 * configure.in: Add DLX configuraton support.
81 * configure: Regenerate.
82 * Makefile.am: Add DLX configuraton support.
83 * Makefile.in: Regenerate.
84 * disassemble.c: Add DLX support.
85 * dlx-dis.c: New file.
87 2002-05-25 Alan Modra <amodra@bigpond.net.au>
89 * Makefile.am (sh-dis.lo): Don't put make commands in deps.
90 * Makefile.in: Regenerate.
91 * arc-dis.c: Use #include "" instead of <> for local header files.
92 * m68k-dis.c: Likewise.
94 Wed May 22 20:11:51 2002 J"orn Rennecke <joern.rennecke@superh.com>
96 * Makefile.am (sh-dis.lo): Compile with @archdefs@.
97 * Makefile.in: regenerate.
99 * sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4
102 2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
104 * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
106 Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com>
108 * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
109 * sh-dis.c (LITTLE_BIT): Delete.
110 (print_insn_sh, print_insn_shl): Deleted.
111 (print_insn_shx): Renamed to
112 (print_insn_sh). No longer static. Handle SHmedia instructions.
113 Use info->endian to determine endianness.
114 * sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
115 (print_insn_sh64x): No longer static. Renamed to
116 (print_insn_sh64). Removed pfun_compact and endian arguments.
117 If we got an uneven address to indicate SHmedia, adjust it.
118 Return -2 for SHcompact instructions.
120 2002-05-17 Alan Modra <amodra@bigpond.net.au>
122 * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
123 * configure.in: Invoke AM_INSTALL_LIBBFD.
124 * Makefile.am (install-data-local): Move to..
125 (install_libopcodes): .. New target.
126 (uninstall_libopcodes): Likewise.
127 (install-bfdlibLTLIBRARIES): Likewise.
128 (uninstall-bfdlibLTLIBRARIES): Likewise.
130 (bfdincludedir): New.
131 (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
132 * aclocal.m4: Regenerate.
133 * configure: Regenerate.
134 * Makefile.in: Regenerate.
136 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
138 * fr30-asm.c: Regenerate.
139 * fr30-desc.c: Regenerate.
140 * fr30-dis.c: Regenerate.
141 * m32r-asm.c: Regenerate.
142 * m32r-desc.c: Regenerate.
143 * m32r-dis.c: Regenerate.
144 * openrisc-asm.c: Regenerate.
145 * openrisc-desc.c: Regenerate.
146 * openrisc-dis.c: Regenerate.
147 * xstormy16-asm.c: Regenerate.
148 * xstormy16-desc.c: Regenerate.
149 * xstormy16-dis.c: Regenerate.
151 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
153 * mips-dis.c (is_newabi): EABI is not a NewABI.
155 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
157 * configure.in (shle-*-*elf*): Include sh64 support.
158 * configure: Regenerate.
160 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
162 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
163 (print_insn_mode): Print some basic info about floating point values.
165 2002-05-09 Anton Blanchard <anton@samba.org>
167 * ppc-opc.c: Add "tlbiel" for POWER4.
169 2002-05-07 Graydon Hoare <graydon@redhat.com>
171 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
172 than just most-recently-opened.
174 2002-05-01 Alan Modra <amodra@bigpond.net.au>
176 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
178 2002-04-24 Christian Groessler <chris@groessler.org>
180 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
181 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
183 (z8k_lookup_instr): CLASS_IGNORE case added.
184 (output_instr): Don't print hex codes, they are already
186 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
187 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
188 (unparse_instr): Fix base and indexed addressing disassembly:
189 The index is inside the brackets.
190 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
191 (opt): Fix shift left/right arithmetic/logical byte defines:
192 The high byte of the immediate word is ignored by the
194 Fix n parameter of ldm opcodes: The opcode contains (n-1).
195 (args): Fix "n" entry.
196 (toks): Add "nim4" and "iiii" entries.
197 * z8k-opc.h: Regenerated with new z8kgen.c.
199 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
201 * po/id.po: New Indonesian translation.
202 * configure.in (ALL_LIGUAS): Add id.po
203 * configure: Regenerate.
205 2002-04-17 matthew green <mrg@redhat.com>
207 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
209 2002-04-04 Alan Modra <amodra@bigpond.net.au>
211 * dep-in.sed: Cope with absolute paths.
212 * Makefile.am (dep.sed): Subst TOPDIR.
214 * Makefile.in: Regenerate.
215 * ppc-opc.c: Whitespace.
216 * s390-dis.c: Fix copyright date.
218 2002-03-23 matthew green <mrg@redhat.com>
220 * ppc-opc.c (vmaddfp): Fix operand order.
222 2002-03-21 Alan Modra <amodra@bigpond.net.au>
224 * Makefile.am: Run "make dep-am".
225 * Makefile.in: Regenerate.
227 2002-03-21 Anton Blanchard <anton@samba.org>
229 * ppc-opc.c: Add optional field to mtmsrd.
230 (MTMSRD_L, XRLARB_MASK): Define.
232 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
234 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
236 (print_insn) Likewise.
237 (putop): Fix handling of 'E'
238 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
241 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
243 * po/fr.po: Updated version.
245 2002-03-16 Chris Demetriou <cgd@broadcom.com>
247 * mips-opc.c (M3D): Tweak comment.
248 (mips_builtin_op): Add comment indicating that opcodes of the
249 same name must be placed together in the table, and sort
250 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
251 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
253 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
255 * Makefile.am: Tidy up sh64 rules.
256 * Makefile.in: Regenerate.
258 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
260 * mips-dis.c: Update copyright years.
262 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
264 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
265 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
266 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
267 indicate that they should dissassemble all applicable
269 * mips-opc.c: Add support for MIPS-3D instructions.
270 (M3D): New definition.
272 * mips-opc.c: Update copyright years.
274 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
276 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
278 2002-03-15 Chris Demetriou <cgd@broadcom.com>
280 * mips-dis.c (is_newabi): Fix ABI decoding.
282 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
284 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
285 and bfd_mach_mipsisa64 cases to match the rest.
287 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
289 * po/fr.po: Updated version.
291 2002-03-13 Alan Modra <amodra@bigpond.net.au>
293 * ppc-opc.c: Add optional `L' field to tlbie.
294 (XRTLRA_MASK): Define.
296 2002-03-06 Chris Demetriou <cgd@broadcom.com>
298 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
301 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
303 2002-03-05 Paul Koning <pkoning@equallogic.com>
305 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
306 for float opcodes that take float operands. Add alternate
307 names (xxxD vs. xxxF) for float opcodes.
308 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
309 (print_foperand): New function to handle float opcode operands.
310 (print_insn_pdp11): Use print_foperand to disassemble float ops.
312 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
316 2002-02-26 Brian Gaeke <brg@dgate.org>
318 * Makefile.am (install-data-local): Install dis-asm.h.
320 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
322 * configure.in (LINGUAS): Add de.po.
323 * configure: Regenerate.
324 * po/de.po: New file.
326 2002-02-25 Alan Modra <amodra@bigpond.net.au>
328 * ppc-dis.c (powerpc_dialect): Handle power4 option.
329 * ppc-opc.c (insert_bdm): Correct description of "at" branch
330 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
331 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
332 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
333 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
334 (PPCCOM32, PPCCOM64): Delete.
335 (NOPOWER4, POWER4): Define.
336 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
337 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
338 are enabled for power4 rather than ppc64.
340 2002-02-20 Tom Rix <trix@redhat.com>
342 * ppc-opc.c (powerpc_operands): Add WS field. Use for tlbre, tlbwe.
344 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
346 * s390-dis.c (init_disasm): Use renamed architecture defines.
348 2002-02-19 matthew green <mrg@redhat.com>
350 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
353 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
355 * po/tr.po: Updated translation.
357 2002-02-15 Richard Henderson <rth@redhat.com>
359 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
362 2002-02-15 Richard Henderson <rth@redhat.com>
364 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
367 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
369 * po/da.po: Updated translation.
371 2002-02-12 Graydon Hoare <graydon@redhat.com>
373 * cgen-asm.in (parse_insn_normal): Change call from
374 @arch@_cgen_parse_operand to cd->parse_operand, to
375 facilitate CGEN_ASM_INIT_HOOK doing useful work.
377 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
379 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
382 2002-02-11 Alan Modra <amodra@bigpond.net.au>
384 * Makefile.am: "make dep-am".
385 * Makefile.in: Regenerate.
386 * aclocal.m4: Regenerate.
387 * config.in: Regenerate.
388 * configure: Regenerate.
390 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
392 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
393 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
395 * configure: Regenerate.
397 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
399 * cgen-dis.c: Add prototypes for count_decodable_bits
400 and add_insn_to_hash_chain.
402 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
404 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
405 * configure: Rebuilt.
407 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
409 * or32-opc.c: Fix compile time warning messages.
410 * or32-dis.c: Fix compile time warning messages.
412 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
415 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
416 * sh64-opc.c: Regenerate.
417 2001-03-13 DJ Delorie <dj@redhat.com>
418 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
419 purpose is more obvious.
420 * sh64-opc.c (shmedia_table): Ditto.
421 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
422 (print_insn_shmedia): Ditto.
423 2001-03-12 DJ Delorie <dj@redhat.com>
424 * sh64-opc.c: Adjust comments to reflect reality: replace bits
425 3:0 with zeros (not "reserved"), replace "rrrrrr" with
426 "gggggg" for two-operand floating point opcodes. Remove
428 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
429 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
430 Correct printing of .byte:s. Return number of printed bytes or
432 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
433 to next four-byte-alignment if insn or data is not aligned.
434 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
435 * sh64-dis.c: Update comments and fix comment formatting.
436 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
437 Abort instead of setting length to 0.
438 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
439 crange_bsearch_cmpl, sh64_get_contents_type,
440 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
441 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
442 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
443 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
444 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
445 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
446 address with same prefix as SHcompact.
447 In the disassembler, use a .cranges section for linked executables.
448 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
449 and update for using structure in info->private_data.
450 (struct sh64_disassemble_info): New.
451 (is_shmedia_p): Delete.
452 (crange_qsort_cmpb): New function.
453 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
454 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
455 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
456 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
457 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
458 pair. Display addresses for linked executables only.
459 (print_insn_sh64x_media): Initialize info->private_data by calling
460 init_sh64_disasm_info.
461 (print_insn_sh64x): Ditto. Find out type of contents by calling
462 sh64_contents_type_disasm. Display data regions using ".long" and
463 ".byte" similar to unrecognized opcodes.
464 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
465 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
466 information in section flags before considering symbols. Don't
467 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
468 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
469 matching $target $canon_targets instead of looking at the
470 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
471 * configure: Regenerate.
472 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
473 * sh64-opc.c (shmedia_creg_table): New.
474 * sh64-opc.h (shmedia_creg_info): New type.
475 (shmedia_creg_table): Declare.
476 * sh64-dis.c (creg_name): New function.
477 (print_insn_shmedia): Use it.
478 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
479 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
480 print_insn_sh64l if little-endian.
481 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
482 (print_insn_sh64l): New.
483 (print_insn_sh64x): New.
484 (print_insn_sh64x_media): New.
485 (print_insn_sh64): Break out code to print_insn_sh64x and
486 print_insn_sh64x_media.
487 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
488 * sh64-opc.h: New file
489 * sh64-opc.c: New file
490 * sh64-dis.c: New file
491 * Makefile.am: Add sh64 targets.
492 (HFILES): Add sh64-opc.h.
493 (CFILES): Add sh64-opc.c and sh64-dis.c.
494 (ALL_MACHINES): Add sh64 files.
495 * Makefile.in: Regenerate.
496 * configure.in: Add support for sh64 to bfd_sh_arch.
497 * configure: Regenerate.
498 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
499 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
501 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
502 * po/POTFILES.in: Regenerate.
503 * po/opcodes.pot: Regenerate.
505 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
507 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
509 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
511 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
513 2002-02-01 Alan Modra <amodra@bigpond.net.au>
515 * Makefile.am: Run "make dep-am"
516 * Makefile.in: Regenerate.
518 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
520 * or32-dis.c: New file.
521 * or32-opc.c: New file.
522 * configure.in: Add support for or32.
523 * configure: Regenerate.
524 * Makefile.am: Add support for or32.
525 * Makefile.in: Regenerate.
526 * disassemble.c: Add support for or32.
527 * po/POTFILES.in: Regenerate.
528 * po/opcodes.pot: Regenerate.
530 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
532 * configure: Regenerated.
534 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
536 * po/fr.po: Updated version.
538 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
540 * po/es.po: Updated version.
542 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
544 * po/da.po: New version.
546 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
548 * po/da.po: New file: Spanish translation.
549 * configure.in (ALL_LINGUAS): Add da.
550 * configure: Regenerate.
552 2002-01-22 Graydon Hoare <graydon@redhat.com>
554 * fr30-asm.c: Regenerate.
555 * fr30-desc.c: Likewise.
556 * fr30-desc.h: Likewise.
557 * fr30-dis.c: Likewise.
558 * fr30-ibld.c: Likewise.
559 * fr30-opc.c: Likewise.
560 * fr30-opc.h: Likewise.
561 * m32r-asm.c: Likewise.
562 * m32r-desc.c: Likewise.
563 * m32r-desc.h: Likewise.
564 * m32r-dis.c: Likewise.
565 * m32r-ibld.c: Likewise.
566 * m32r-opc.c: Likewise.
567 * m32r-opc.h: Likewise.
568 * m32r-opinst.c: Likewise.
569 * openrisc-asm.c: Likewise.
570 * openrisc-desc.c: Likewise.
571 * openrisc-desc.h: Likewise.
572 * openrisc-dis.c: Likewise.
573 * openrisc-ibld.c: Likewise.
574 * openrisc-opc.c: Likewise.
575 * openrisc-opc.h: Likewise.
576 * xstormy16-desc.c: Likewise.
578 2002-01-22 Richard Henderson <rth@redhat.com>
580 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
583 2002-01-22 Alan Modra <amodra@bigpond.net.au>
585 * Makefile.am: Run "make dep-am".
586 * Makefile.in: Regenerate.
587 * opcodes/po/POTFILES.in: Regenerate.
589 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
591 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
592 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
594 2002-01-18 Keith Walker <keith.walker@arm.com>
596 * arm-opc.h (arm_opcodes): Add bxj instruction.
598 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
600 * po/opcodes.pot: Regenerate.
601 * po/fr.po: Regenerate.
602 * po/sv.po: Regenerate.
603 * po/tr.po: Regenerate.
605 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
607 * po/tr.po: Import new version.
609 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
611 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
612 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
615 2002-01-10 matthew green <mrg@redhat.com>
617 * xstormy16-asm.c: Regenerate.
618 * xstormy16-desc.c: Likewise.
619 * xstormy16-desc.h: Likewise.
620 * xstormy16-dis.c: Likewise.
621 * xstormy16-opc.c: Likewise.
622 * xstormy16-opc.h: Likewise.
624 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
626 * po/es.po: New file: Spanish translation.
627 * configure.in (ALL_LINGUAS): Add es.
628 * configure: Regenerate.
630 2001-12-31 Jeffrey A Law (law@redhat.com)
632 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
633 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
634 Always emit a space after 'H'.
636 2001-12-18 matthew green <mrg@redhat.com>
638 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
640 2001-12-17 Richard Henderson <rth@redhat.com>
642 * alpha-opc.c (unop): Encode with RB as $sp.
644 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
646 * Makefile.am: Add support for xstormy16.
647 * Makefile.in: Regenerate.
648 * configure.in: Add support for xstormy16.
649 * configure: Regenerate.
650 * disassemble.c: Add support for xstormy16.
651 * xstormy16-asm.c: New generated file.
652 * xstormy16-desc.c: New generated file.
653 * xstormy16-desc.h: New generated file.
654 * xstormy16-dis.c: New generated file.
655 * xstormy16-ibld.c: New generated file.
656 * xstormy16-opc.c: New generated file.
657 * xstormy16-opc.h: New generated file.
659 2001-12-06 Richard Henderson <rth@redhat.com>
661 * alpha-opc.c (alpha_opcodes): Add wh64en.
663 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
665 * d10v-opc.c (d10v_predefined_registers): Remove warnings
666 introduced in Nov 29's patch.
668 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
671 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
674 * d10v-opc.c (RSRC_NOSP): New macro.
675 (d10v_operands): Add it.
676 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
678 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
680 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
681 (RSRC_SP): New macro.
682 (d10v_operands): Add it.
683 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
685 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
687 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
688 Also, break out of the loop as soon as an instruction has been
691 2001-11-17 matthew green <mrg@redhat.com>
693 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
695 2001-11-15 Alan Modra <amodra@bigpond.net.au>
697 * po/POTFILES.in: Regenerate.
699 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
700 (insert_bat, extract_bat, insert_bba, extract_bba,
701 insert_bd, extract_bd, insert_bdm, extract_bdm,
702 insert_bdp, extract_bdp, valid_bo,
703 insert_bo, extract_bo, insert_boe, extract_boe,
704 insert_ds, extract_ds, insert_de, extract_de,
705 insert_des, extract_des, insert_li, extract_li,
706 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
707 insert_nb, extract_nb, insert_nsi, extract_nsi,
708 insert_ral, insert_ram, insert_ras,
709 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
710 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
711 (extract_bd, extract_bdm, extract_bdp,
712 extract_ds, extract_des,
713 extract_li, extract_nsi): Implement sign extension without conditional.
714 (insert_bdm, extract_bdm,
715 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
716 (extract_bdm, extract_bdp): Correct 32 bit validation.
717 (AT1_MASK, AT2_MASK): Define.
718 (BBOAT_MASK): Define.
719 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
720 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
721 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
722 (PPCCOM32, PPCCOM64): Define.
723 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
724 and add new patterns to implement 64 bit branches with hints. Move
725 booke instructions so they match before ppc64.
727 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
728 64 bit default targets, and parse "32" and "64" in options.
730 (print_insn_powerpc): Pass dialect to operand->extract.
732 2001-11-14 Dave Brolley <brolley@redhat.com>
734 * cgen-dis.c (count_decodable_bits): New function.
735 (add_insn_to_hash_chain): New function.
736 (hash_insn_array): Call add_insn_to_hash_chain.
737 (hash_insn_list): Call add_insn_to_hash_chain.
738 * m32r-dis.c: Regenerated.
739 * fr30-dis.c: Regenerated.
741 2001-11-14 Andreas Jaeger <aj@suse.de>
743 * i386-dis.c (print_insn): Use x86-64 as option.
745 2001-11-14 Alan Modra <amodra@bigpond.net.au>
747 * disassemble.c (disassembler): Call print_insn_i386.
748 * i386-dis.c (SUFFIX_ALWAYS): Define.
749 (struct dis_private): Add orig_sizeflag.
750 (print_insn_i386): Make it a wrapper, calling..
751 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
752 warning without using volatile by moving orig_sizeflag to priv,
753 and removing inbuf. Parse disassembler_options.
754 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
756 (putop): Remove #ifdef SUFFIX_ALWAYS.
758 2001-11-11 Timothy Wall <twall@alum.mit.edu>
760 * tic54x-dis.c: Use revised opcode structure. Export opcode
762 (has_lkaddr): Don't forget about Lmem insns.
763 * tic54x-opc.c: Add emulation trap. Parallel table now uses
764 standard opcode templates.
766 2001-11-13 Zack Weinberg <zack@codesourcery.com>
768 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
769 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
770 category instead of Ew.
772 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
774 * m68k-opc.c: Fix definitions of wddata[bwl].
776 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
778 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
779 fit in the buffer, try to match the empty keyword.
781 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
783 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
784 * fr30-ibld.c: Regenerate.
785 * m32r-ibld.c: Regenerate.
786 * openrisc-ibld.c: Regenerate.
788 2001-11-04 Chris Demetriou <cgd@broadcom.com>
790 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
792 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
794 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
795 * configure: Regernate.
796 * po/fr.po: New file.
797 * po/sv.po: New file.
798 * po/tr.po: New file.
800 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
802 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
805 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
807 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
809 * Makefile.in: Regenerate.
810 * mmix-dis.c, mmix-opc.c: New files.
812 2001-10-29 Kazu Hirata <kazu@hxi.com>
814 * d30v-dis.c: Fix a comment typo.
816 2001-10-23 Chris Demetriou <cgd@broadcom.com>
818 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
819 "bltzall" as writing GPR 31 (since they do).
821 * mips-dis.c (print_insn_arg): Calculate info->target
823 (print_insn_mips): Fill in instruction info.
824 (print_mips16_insn_arg): Remove unneded variable 'val'.
825 Removed duplicated instruction target calculations,
826 calculate once and print that result. Use same idiom for
827 masking the jump segment bits as is used in print_insn_arg.
829 2001-10-20 Alan Modra <amodra@bigpond.net.au>
831 * ppc-opc.c (CT): Make it an optional operand.
833 2001-10-17 Chris Demetriou <cgd@broadcom.com>
835 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
836 SB-1 binaries include instructions specific to the SB-1.
837 * mips-opc.c (SB1): New definition.
838 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
839 "recip.ps", "rsqrt.ps", and "sqrt.ps".
841 2001-10-17 matthew green <mrg@redhat.com>
843 * ppc-opc.c (STRM): New AltiVec operand.
844 (XDSS): New AltiVec instruction form.
845 (mtvscr): Correct operand list.
846 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
848 2001-10-17 Alan Modra <amodra@bigpond.net.au>
850 * po/POTFILES.in: Regenerate.
852 2001-10-13 matthew green <mrg@redhat.com>
854 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
855 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
856 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
858 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
860 * cgen-ibld.in: Include safe-ctype.h in preference to
862 * cgen-asm.in: Include safe-ctype.h in preference to
863 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
864 TOLOWER instead of tolower.
865 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
866 string elements in constructed regular expression.
867 * fr30-asm.c: Regenerate.
868 * fr30-desc.c: Regenerate.
869 * fr30-ibld.c: Regenerate.
870 * m32r-asm.c: Regenerate.
871 * m32r-desc.c: Regenerate.
872 * m32r-ibld.c: Regenerate.
873 * openrisc-asm.c: Regenerate.
874 * openrisc-desc.c: Regenerate.
875 * openrisc-ibld.c: Regenerate.
876 * po/opcodes.pot: Regenerate.
878 2001-10-12 matthew green <mrg@redhat.com>
880 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
881 instruction field instruction/extraction functions for new BookE
882 DE form instructions.
883 (CT): New macro for CT field in an X form instruction.
884 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
886 (PPC64): Don't include PPC_OPCODE_PPC.
887 (403): New opcode macro for PPC403 processors.
888 (BOOKE): New opcode macro for BookE processors.
889 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
890 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
891 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
892 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
893 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
894 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
895 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
896 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
897 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
898 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
899 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
900 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
901 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
902 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
904 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
905 for a disassembler option of `booke', `booke32' or `booke64' to enable
906 BookE support in the disassembler.
908 2001-10-12 John Healy <jhealy@redhat.com>
910 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
911 for the length when extracting the base part of the insn.
913 2001-10-09 Bruno Haible <haible@clisp.cons.org>
915 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
916 regular expression. Fix some formatting problems.
917 * fr30-asm.c: Regenerate.
918 * openrisc-asm.c: Regenerate.
919 * m32r-asm.c: Regenerate.
921 2001-10-09 Christian Groessler <cpg@aladdin.de>
923 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
924 of indirect register memory accesses to be same format the
927 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
929 * sh-opc.h: Fix encoding of least significant nibble of the
930 DSP single data transfer instructions.
932 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
935 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
937 * cgen-asm.in: Fix compile time warning messages in generated
939 * cgen-dis.in: The same.
940 * cgen-ibld.in: The same.
941 * fr30-asm.c: Regenerate.
942 * fr30-desc.c: Regenerate.
943 * fr30-dis.c: Regenerate.
944 * fr30-ibld.c: Regenerate.
945 * fr30-opc.c: Regenerate.
946 * m32r-asm.c: Regenerate.
947 * m32r-desc.c: Regenerate.
948 * m32r-dis.c: Regenerate.
949 * m32r-ibld.c: Regenerate.
950 * m32r-opc.c: Regenerate.
951 * m32r-opinst.c Regenerate.
952 * openrisc-asm.c: Regenerate.
953 * openrisc-desc.c: Regenerate.
954 * openrisc-dis.c: Regenerate.
955 * openrisc-ibld.c: Regenerate.
956 * openrisc-opc.c: Regenerate.
957 * openrisc-opc.h: Regenerate.
958 * Makefile.in: Regenerate.
959 * po/POTFILES.in: Regenerate.
960 * po/opcodes.pot: Regenerate.
962 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
964 * arm-opc.h (arm_opcodes): Add cirrus insns.
966 * arm-dis.c (print_insn_arm): Add 'I' case.
968 2001-10-03 Alan Modra <amodra@bigpond.net.au>
970 * po/POTFILES.in: Regenerate.
971 * configure: Regenerate.
973 2001-10-02 Alan Modra <amodra@bigpond.net.au>
975 * Makefile.am (Makefile): Depend on bfd/configure.in.
977 * Makefile.in: Regenerate.
979 2001-09-30 John Healy <jhealy@redhat.com>
981 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
982 calls to cgen_get_insn_value and cgen_put_insn_value calls.
983 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
985 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
987 * Makefile.am: Update dependencies with "make dep-am".
988 * Makefile.in: Regenerate.
990 2001-09-26 Alan Modra <amodra@bigpond.net.au>
992 * arc-dis.c: Formatting fixes.
993 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
995 2001-09-21 Bruno Haible <haible@clisp.cons.org>
997 * arc-dis.c: Don't include <ctype.h>.
998 * openrisc-desc.c: Likewise.
999 * openrisc-ibld.c: Likewise.
1001 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
1003 * fr30-opc.c: Fix compile time warning messages.
1004 * i370-opc.c: Fix compile time warning messages.
1005 * i960-dis.c: Fix compile time warning messages.
1006 * m32r-asm.c: Fix compile time warning messages.
1007 * m32r-desc.c: Fix compile time warning messages.
1008 * m32r-dis.c: Fix compile time warning messages.
1009 * m32r-ibld.c: Fix compile time warning messages.
1010 * m32r-opc.c: Fix compile time warning messages.
1011 * m32r-opinst.c: Fix compile time warning messages.
1012 * ns32k-dis.c: Fix compile time warning messages.
1013 * openrisc-asm.c: Fix compile time warning messages.
1014 * openrisc-desc.c: Fix compile time warning messages.
1015 * openrisc-dis.c: Fix compile time warning messages.
1016 * openrisc-ibld.c: Fix compile time warning messages.
1017 * openrisc-opc.c: Fix compile time warning messages.
1018 * pdp11-dis.c: Fix compile time warning messages.
1019 * tic54x-dis.c: Fix compile time warning messages.
1020 * v850-opc.c: Fix compile time warning messages.
1021 * vax-dis.c: Fix compile time warning messages.
1022 * w65-opc.h: Fix compile time warning messages.
1023 * z8k-opc.h: Fix compile time warning messages.
1024 * z8kgen.c: Fix compile time warning messages.
1026 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
1028 * arm-dis.c: Fix compile time warning messages.
1029 * cgen-asm.c: Fix compile time warning messages.
1030 * cgen-dis.c: Fix compile time warning messages.
1031 * cris-dis.c: Fix compile time warning messages.
1032 * d10v-dis.c: Fix compile time warning messages.
1033 * fr30-asm.c: Fix compile time warning messages.
1034 * fr30-desc.c: Fix compile time warning messages.
1035 * fr30-dis.c: Fix compile time warning messages.
1036 * fr30-ibld.c: Fix compile time warning messages.
1038 2001-09-18 Bruno Haible <haible@clisp.cons.org>
1040 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1041 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
1042 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
1043 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
1045 (cgen_keyword_add): Use ISALNUM instead of isalnum.
1046 (hash_keyword_name): Use TOLOWER instead of tolower.
1047 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1048 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1050 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
1051 * fr30-desc.c: Don't include <ctype.h>.
1052 * fr30-ibld.c: Likewise.
1053 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
1054 (load_insn_classes, parse_resource_users, load_depfile): Use
1055 ISSPACE instead of isspace.
1056 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1057 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1059 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
1060 * m32r-desc.c: Don't include <ctype.h>.
1061 * m32r-ibld.c: Likewise.
1062 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1063 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1065 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
1067 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
1069 * Makefile.am: Add rules and dependencies to create the s/390 opcode
1070 table out of s390-opc.txt automatically.
1071 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
1072 * s390-mkopc.c (dumpTable): Change output to create a complete file.
1073 * s390-opc.c: New improved opcode format macros and remove the
1074 pregenerated opcode table.
1075 * s390-opc.txt: Adapt to new improved opcode format macros.
1077 2001-09-14 David Schleef <ds@schleef.org>
1079 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
1081 2001-09-04 Alan Modra <amodra@bigpond.net.au>
1083 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
1084 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
1086 2001-08-31 Eric Christopher <echristo@redhat.com>
1087 Jason Eckhardt <jle@redhat.com>
1089 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
1090 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
1093 2001-08-31 Andreas Jaeger <aj@suse.de>
1095 * tic54x-opc.c: Add default initializers to avoid warnings.
1097 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
1098 * arc-ext.c: Likewise.
1100 2001-08-28 matthew green <mrg@redhat.com>
1102 * ppc-opc.c (icbt): Order correctly.
1104 2001-08-27 David Edelsohn <dje@watson.ibm.com>
1105 Torbjorn Granlund <tege@swox.com>
1107 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
1109 (insert_ds): Complain if not a multiple of 4.
1111 (XSYNC_MASK): Define.
1112 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
1113 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
1115 2001-08-26 Andreas Jaeger <aj@suse.de>
1117 * h8500-opc.h: Add default initializers to h8500_table to shut up
1120 2001-08-25 Andreas Jaeger <aj@suse.de>
1122 * tic54x-dis.c: Add unused attributes where needed.
1124 * z8k-dis.c (output_instr): Add unused attribute.
1126 * h8300-dis.c: Add missing prototypes.
1127 (bfd_h8_disassemble): Make static.
1129 * cris-dis.c: Add missing prototype.
1130 * h8500-dis.c: Likewise.
1131 * m68hc11-dis.c: Likewise.
1132 * pj-dis.c: Likewise.
1133 * tic54x-dis.c: Likewise.
1134 * v850-dis.c: Likewise.
1135 * vax-dis.c: Likewise.
1136 * w65-dis.c: Likewise.
1137 * z8k-dis.c: Likewise.
1139 * d10v-dis.c: Add missing prototype.
1140 (dis_long): Remove unused variable.
1141 (dis_2_short): Likewise.
1143 * sh-dis.c: Add missing prototypes.
1144 * v850-opc.c: Likewise.
1145 Add unused attributes where needed.
1147 * ns32k-dis.c: Add missing prototypes.
1148 (bit_extract_simple): Remove unused variable.
1150 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1152 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1153 branch instructions for gcc 3.0.
1154 * opcodes/s390-opc.txt: Likewise.
1156 2001-08-21 Andreas Jaeger <aj@suse.de>
1158 * i960-dis.c: Add parameters for prototypes
1159 (ctrl): Add unused attributes.
1161 (put_abs): Likewise.
1163 * mips-dis.c: Add missing prototypes.
1164 * a29k-dis.c: Likewise.
1165 * arc-dis.c: Likewise.
1166 * ia64-opc.c: Likewise.
1168 * s390-dis.c: Add missing prototypes.
1169 (init_disasm): Remove unused attribute since the parameter is
1172 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1174 * mips-opc.c (M1): Define. Reformatted Code.
1175 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1178 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1180 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1181 the corresponding non-likely insn is in MIPS I.
1183 2001-08-13 Kazu Hirata <kazu@hxi.com>
1185 * mcore-dis.c: Fix formatting.
1186 * mips-dis.c: Likewise.
1187 * pj-dis.c: Likewise.
1188 * z8k-dis.c: Likewise.
1190 2001-08-12 Richard Henderson <rth@redhat.com>
1192 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1193 to *VALUEP. Regenerate all cgen files.
1195 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1197 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1199 * mips-opc.c (G6): Undefine.
1200 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1201 as the first "move" alternative.
1203 2001-08-10 Andreas Jaeger <aj@suse.de>
1205 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1207 * configure: Regenerate.
1209 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1211 * ppc-opc.c: Revert 2001-08-08.
1213 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1215 * dis-buf.c (generic_strcat_address): Add missing prototype.
1216 #if 0 the functions as it is unused.
1218 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1220 1999-10-25 Torbjorn Granlund <tege@swox.com>
1221 * ppc-opc.c: Include "bfd.h".
1222 (powerpc_operands): Add new field for reloc type.
1224 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1226 * mips-dis.c (print_insn_arg): Don't use software integer registers
1227 for coprocessor registers.
1228 (get_mips_isa): Removed.
1229 (is_newabi): New function, checks if NewABI is used.
1230 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1232 2001-08-01 Christian Groessler <cpg@aladdin.de>
1234 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1235 get stderr definition.
1236 (internal, gas): Removed warnings.
1237 (gas): Create a correct final entry for created array.
1238 * z8k-opc.h: Recreated with new z8kgen.
1240 2001-07-28 Kazu Hirata <kazu@hxi.com>
1242 * i386-dis.c: Fix formatting.
1244 2001-07-28 Matthias Kramm <kramm@quiss.org>
1246 * i386-dis.c: Change formatting conventions for architecture
1247 i386:intel to better match the format of various intel i386
1248 assemblers, like nasm, tasm or masm.
1250 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1252 * Makefile.am: Update dependencies with "make dep-am".
1253 * Makefile.in: Regenerate
1255 2001-07-24 Kazu Hirata <kazu@hxi.com>
1257 * alpha-dis.c: Fix formatting.
1258 * cris-dis.c: Likewise.
1259 * d10v-dis.c: Likewise.
1260 * d30v-dis.c: Likewise.
1261 * m10300-dis.c: Likewise.
1262 * tic54x-dis.c: Likewise.
1264 2001-07-23 Kazu Hirata <kazu@hxi.com>
1266 * m68k-dis.c: Fix formatting.
1267 * pj-dis.c: Likewise.
1268 * s390-dis.c: Likewise.
1269 * z8k-dis.c: Likewise.
1271 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1273 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1274 into the rest of the surrounding definitions.
1276 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1278 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1279 for lgdt, lidt, sgdt, sidt.
1281 2001-07-13 Philip Blundell <philb@gnu.org>
1283 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1285 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1287 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1289 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1290 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1291 to verify if it is worth parsing the insn as insn "x". Also update
1292 error message when insn is not a recognized format of the insn vs
1293 when the insn is completely unrecognized.
1295 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1297 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1299 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1300 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1302 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1304 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1305 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1306 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1308 2001-07-05 Ben Elliston <bje@redhat.com>
1310 * Makefile.am (CPUDIR): Define.
1311 (stamp-m32r): Update dependencies.
1312 (stamp-fr30): Ditto.
1313 (stamp-openrisc): Ditto.
1314 * Makefile.in: Regenerate.
1316 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1318 * ppc-opc.c: Fix encoding of 'clf' instruction.
1320 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1322 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1324 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1326 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1327 * cgen-opc.c (cgen_keyword_add): Ignore special first
1328 character when building nonalpha_chars field.
1330 2001-06-24 Ben Elliston <bje@redhat.com>
1332 * m88k-dis.c: Format to conform to GNU coding standards.
1334 2001-06-23 Andreas Jaeger <aj@suse.de>
1336 * disassemble.c (disassembler_usage): Add unused attribute.
1338 2001-06-22 Eric Christopher <echristo@redhat.com>
1340 * mips-opc.c: Move prefx to start of the table.
1342 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1344 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1347 2001-06-22 Pauli <pauli@moreton.com.au>
1349 * m68k-opc.c: Add wdebug instruction.
1351 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1353 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1355 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1357 * cgen-asm.c (cgen_parse_keyword): When looking for the
1358 boundaries of a keyword, allow any special characters
1359 that are actually in one of the allowed keyword.
1360 * cgen-opc.c (cgen_keyword_add): Add any special characters
1361 to the nonalpha_chars field.
1363 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1365 * s390-opc.c: Add lgh instruction.
1366 * s390-opc.txt: Likewise.
1368 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1370 * i386-dis.c: Group function prototypes in one place.
1371 (FLOATCODE): Redefine as 1.
1372 (USE_GROUPS): Redefine as 2.
1373 (USE_PREFIX_USER_TABLE): Redefine as 3.
1374 (X86_64_SPECIAL): Define as 4.
1375 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1376 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1377 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1378 (dis386): New table combining above four tables.
1379 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1380 (dis386_twobyte): New table combining above two tables.
1381 (x86_64_table): New table to handle x86_64.
1383 (float_mem_att, float_mem_intel): Delet.
1384 (float_mem): New table combining above two tables.
1385 (print_insn_i386): Modify for above.
1386 (dofloat): Likewise.
1387 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1388 Return 0 on success, 1 if no valid alternative.
1389 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1390 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1391 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1392 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1394 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1395 (OP_I64): If not 64-bit mode, call OP_I.
1396 OP_OFF64): If not 64-bit mode, call OP_OFF.
1397 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1398 'ignore'/'ignored' to 'bytemode'.
1400 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1402 * configure.in: Sort 'ta' case statement.
1403 * configure: Regenerate.
1405 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1407 (disx86_64_att): Likewise.
1408 (dis386_twobyte_att): Likewise.
1409 (print_insn_i386): Don't print branch hints as a prefix.
1410 (putop): 'H' macro prints branch hints.
1411 (get64): Kill compile warnings.
1413 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1415 * sh-opc.h (sh_table): Don't use empty initializers.
1417 2001-06-06 Christian Groessler <cpg@aladdin.de>
1419 * z8k-dis.c: Fix formatting.
1420 (unpack_instr): Remove unused cases in switch statement. Add
1421 safety abort() in default case.
1422 (unparse_instr): Add safety abort() in default case.
1424 2001-06-06 Peter Jakubek <pjak@snafu.de>
1426 * m68k-dis.c (print_insn_m68k): Fix typo.
1427 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1428 mcf (ColdFire) div, rem and moveb instructions.
1430 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1432 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1433 (cond_jump_mode, loop_jcxz_mode): Define.
1434 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1435 appropriate, and 'F' suffix to loop insns.
1436 (disx86_64_att): Likewise.
1437 (dis386_twobyte_att): Likewise.
1438 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1439 Output data size prefix for long conditional jumps. Output cs and
1441 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1442 (OP_J): Don't make PREFIX_DATA used.
1444 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1446 * sh-opc.h (sh_table): Complete last element entry to avoid
1449 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1451 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1453 2001-05-23 Alan Modra <amodra@one.net.au>
1455 * arc-opc.c: Whitespace changes.
1457 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1459 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1462 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1464 * cgen-dis.in (extract_normal): Complete support for min<base case.
1466 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1468 * mips-dis.c (INSNLEN): Rename MAXLEN.
1469 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1470 (print_insn_arg): Remove $ prefix of register names.
1471 (set_mips_isa_type): Remove.
1472 (mips_isa_type): New function.
1473 (get_mips_isa): New Function.
1474 (print_insn_mips): Rename _print_insn_mips.
1475 (_print_insn_mips): New function, contains code which was
1476 duplicated in print_insn_big_mips and print_insn_little_mips.
1477 (print_insn_big_mips): Moved code to _print_insn_mips.
1478 (print_insn_little_mips): Likewise.
1479 (print_mips16_insn_arg): Remove $ prefix of register names.
1480 Print error message before abort.
1482 2001-05-14 J.T. Conklin <jtc@redback.com>
1484 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1485 simplified mnemonics used for setting PPC750-specific special
1488 2001-05-12 H.J. Lu <hjl@gnu.org>
1490 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1493 2001-05-12 Peter Targett <peter.targett@arccores.com>
1495 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1496 register to r/w. Formatting fixes throughout file.
1498 2001-05-12 Alan Modra <amodra@one.net.au>
1500 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1502 (twobyte_has_modrm): Update table.
1503 (need_modrm): Give it file scope.
1504 (MODRM_CHECK): Define.
1505 (dofloat): Use MODRM_CHECK.
1510 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1512 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1513 even at end of a section.
1514 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1515 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1517 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1519 * disassemble.c (disassembler_usage): Remove unused attribute.
1521 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1523 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1525 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1527 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1528 assume incoming buffer already has the base insn loaded. Handle
1529 smaller-than-base instructions for variable-length case.
1531 2001-05-04 Alan Modra <amodra@one.net.au>
1533 * i386-dis.c (Ev, Ed): Remove duplicate define.
1536 (OP_XS): New function.
1537 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1539 (dis386_twobyte_intel): Likewise.
1540 (prefix_user_table): Use MS for maskmovq operand.
1542 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1544 * Makefile.am: Add OpenRISC target.
1545 * Makefile.in: Regenerated.
1547 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1549 * configure.in (bfd_openrisc_arch): Add target.
1550 * configure: Regenerated.
1552 * openrisc-asm.c: New file.
1553 * openrisc-desc.c: Likewise.
1554 * openrisc-desc.h: Likewise.
1555 * openrisc-dis.c: Likewise.
1556 * openrisc-ibld.c: Likewise.
1557 * openrisc-opc.c: Likewise.
1558 * openrisc-opc.h: Likewise.
1560 2001-04-24 Christian Groessler <cpg@aladdin.de>
1562 * z8k-dis.c: add names of control registers (ctrl_names);
1563 (seg_length): provides instruction length fixup for segmented
1564 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1565 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1566 (unparse_intr): handle CLASS_PR, print addresses without '#'
1567 * z8k-opc.h: re-created with new z8kgen
1568 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1569 entries for ldctl/ldctlb instruction
1571 2001-04-06 Andreas Jaeger <aj@suse.de>
1573 * i386-dis.c: Add ffreep instruction.
1575 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1577 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1579 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1581 * i386-dis.c (PREGRP25): Define.
1582 (dis386_twobyte_att): Use here in place of "movntq" entry.
1583 (dis386_twobyte_intel): Likewise.
1584 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1586 (dis386_twobyte_att): Use here.
1587 (dis386_twobyte_intel): Likewise.
1588 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1589 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1590 (prefix_user_table): Cosmetic changes to "bad" entries.
1592 2001-03-23 Nick Clifton <nickc@redhat.com>
1594 * mips-opc.c: Remove extraneous whitespace.
1595 * mips-dis.c: Remove extraneous whitespace.
1597 2001-03-22 Ben Elliston <bje@redhat.com>
1599 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1600 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1601 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1602 to allay a compiler warning.
1604 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1606 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1607 (dis386_twobyte_intel): Likewise.
1608 (twobyte_has_modrm): Set entry for paddq, psubq.
1610 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1612 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1613 determination via CGEN_COMPUTE_MACH.
1614 * fr30-desc.c: Regenerate.
1615 * fr30-dis.c: Regenerate.
1616 * fr30-opc.h: Regenerate.
1617 * m32r-desc.c: Regenerate.
1618 * m32r-dis.c: Regenerate.
1619 * m32r-opc.h: Regenerate.
1620 * m32r-opinst.c: Regenerate.
1622 2001-03-20 H.J. Lu <hjl@gnu.org>
1624 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1625 * configure: Rebuild.
1627 2001-03-19 Jim Wilson <wilson@redhat.com>
1629 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1630 notestr if larger than xsect.
1631 (in_class): Handle format M5.
1632 * ia64-asmtab.c: Regnerate.
1634 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1636 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1637 has more than one byte left to read.
1639 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1641 * s390-opc.c: Add new opcodes. Smooth out formatting.
1642 * s390-opc.txt: Add new opcodes.
1644 2001-03-06 Nick Clifton <nickc@redhat.com>
1646 * arm-dis.c (print_insn_thumb): Compute destination address
1647 of BLX(1) instruction by taking bit 1 from PC and not from bit
1650 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1652 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1653 so command line switches will work.
1655 2001-03-05 Dave Brolley <brolley@redhat.com>
1657 * fr30-asm.c: Regenerate.
1658 * fr30-desc.c: Regenerate.
1659 * fr30-desc.h: Regenerate.
1660 * fr30-dis.c: Regenerate.
1661 * fr30-ibld.c: Regenerate.
1662 * fr30-opc.c: Regenerate.
1663 * fr30-opc.h: Regenerate.
1664 * m32r-asm.c: Regenerate.
1665 * m32r-desc.c: Regenerate.
1666 * m32r-desc.h: Regenerate.
1667 * m32r-dis.c: Regenerate.
1668 * m32r-ibld.c: Regenerate.
1669 * m32r-opc.c: Regenerate.
1670 * m32r-opc.h: Regenerate.
1671 * m32r-opinst.c: Regenerate.
1673 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1675 * m68k-opc.c: fix cpushl according to Motorola. Enable
1676 bunch of instructions for Coldfire 5407 and add all new.
1678 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1680 * configure.in (BFD_VERSION): Do without grep.
1681 * configure: Regenerate.
1682 * Makefile.am: Run "make dep-am".
1683 * Makefile.in: Regenerate.
1685 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1687 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1688 * ia64-asmtab.c: Regenerate.
1690 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1692 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1693 separate variants: one for IMM22 and the other for IMM14.
1694 * ia64-asmtab.c: Regenerate.
1696 2001-02-21 Greg McGary <greg@mcgary.org>
1698 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1700 2001-02-20 H.J. Lu <hjl@gnu.org>
1702 * Makefile.am (ia64-ic.tbl): Remove the target.
1703 (ia64-raw.tbl): Likewise.
1704 (ia64-waw.tbl): Likewise.
1705 (ia64-war.tbl): Likewise.
1706 (ia64-asmtab.c): Generate it in the source directory.
1707 * Makefile.in: Regenerated.
1709 2001-02-18 lars brinkhoff <lars@nocrew.org>
1711 * Makefile.am: Add PDP-11 target.
1712 * configure.in: Likewise.
1713 * disassemble.c: Likewise.
1714 * pdp11-dis.c: New file.
1715 * pdp11-opc.c: New file.
1717 2001-02-14 Jim Wilson <wilson@redhat.com>
1719 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1720 * ia64-asmtab.c: Regenerate.
1722 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1724 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1728 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1730 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1731 the following instruction not of the jump itself for the jump
1733 (print_mips16_insn_arg): Likewise.
1735 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1737 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1739 * Makefile.in: Regenerate.
1741 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1743 * Makefile.am: Add linux target for S/390.
1744 * Makefile.in: Likewise.
1745 * configure.in: Likewise.
1746 * disassemble.c: Likewise.
1747 * s390-dis.c: New file.
1748 * s390-mkopc.c: New file.
1749 * s390-opc.c: New file.
1750 * s390-opc.txt: New file.
1752 2001-02-05 Jim Wilson <wilson@redhat.com>
1754 * ia64-asmtab.c: Revert 2000-12-16 change.
1756 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1758 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1759 * m32r-desc.h: Regenerate.
1761 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1763 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1764 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1766 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1768 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1770 2001-01-13 Nick Clifton <nickc@redhat.com>
1772 * disassemble.c: Remove spurious white space.
1774 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1776 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1779 2001-01-11 Peter Targett <peter.targett@arccores.com>
1781 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1782 * Makefile.am (C_FILES): Add arc-ext.c.
1783 (ALL_MACHINES) Add arc-ext.lo.
1784 (INCLUDES) Add opcode directory to list.
1785 New dependency entry for arc-ext.lo.
1786 * disassemble.c (disassembler): Correct call to
1787 arc_get_disassembler.
1788 * arc-opc.c: New update for ARC, including full base
1789 instructions for ARC variants.
1790 * arc-dis.h, arc-dis.c: New update for ARC, including
1791 extensibility functionality.
1792 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1794 2001-01-10 Jan Hubicka <jh@suse.cz>
1796 * i386-dis.c (PREGRP15 - PREGRP24): New.
1797 (dis386_twobyt): Add SSE2 instructions.
1798 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1799 (twobyte_uses_f3_prefix): ... this one.
1800 (grps): Add SSE instructions.
1801 (prefix_user_table): Add two new slots; add SSE2 instructions.
1802 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1803 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1804 to prefix_user_table.
1805 (OP_E): Accept mfence and lfence as well.
1806 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1807 (OP_XMM): Support REX extensions.
1811 2001-01-09 Nick Clifton <nickc@redhat.com>
1813 * arm-dis.c (print_insn): Set pc to zero for instructions with
1814 a reloc associated with them.
1816 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1818 * cgen-asm.in (parse_insn_normal): Changed syn to be
1819 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1820 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1821 to '\0' to use 0 instead.
1822 * cgen-dis.in (print_insn_normal): Ditto.
1823 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1825 2001-01-05 Jan Hubicka <jh@suse.cz>
1827 * i386-dis.c: Add x86_64 support.
1828 (rex): New static variable.
1829 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1830 (USED_REX): New macro.
1831 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1832 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1833 (OP_REG, OP_OFF): Declare.
1834 (get64, get32, get32s): New functions.
1835 (r??_reg): New constants.
1836 (dis386_att): Change templates of instruction implicitly promoted
1837 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1839 (dis386_intel): Likewise.
1840 (dixx86_64_att): New table based on dis386_att.
1841 (dixx86_64_intel): New table based on dis386_intel.
1842 (names64, names8rex): New global variable.
1843 (names32, names16): Add extended registers.
1844 (prefix_user_t): Recognize rex prefixes.
1845 (prefix_name): Print REX prefixes nicely.
1846 (op_riprel): New global variable.
1847 (start_pc): Set type to bfd_vma.
1848 (print_insn_i386): Detect the 64bit mode and use proper table;
1849 move ckprefix after initializing the buffer; output unused rex prefixes;
1850 output information about target of RIP relative addresses.
1851 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1852 (print_operand_value): New function.
1853 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1854 REX prefix and new modes.
1855 (get64, get32s): New.
1856 (get32): Return bfd_signed_vma type.
1857 (set_op): Initialize the op_riprel.
1858 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1860 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1862 cgen-dis.in (read_insn): Use bfd_get_bits()
1864 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1866 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1867 (hash_insn_list): Likewise
1868 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1869 (extract_1): Use bfd_get_bits().
1870 (extract_normal): Apply sign extension to both extraction
1872 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1873 (cgen_put_insn_value): Use bfd_put_bits()
1875 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1877 * cgen-asm.in (parse_insn_normal): Print better error message for
1878 instructions with missing operands.
1880 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1882 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1884 2000-12-16 Nick Clifton <nickc@redhat.com>
1886 * Makefile.in: Regenerate.
1887 * aclocal.m4: Regenerate.
1888 * config.in: Regenerate.
1889 * configure.in: Add spacing.
1890 * configure: Regenerate.
1891 * ia64-asmtab.c: Regenerate.
1892 * po/opcodes.pot: Regenerate.
1894 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1896 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1897 error messages over later parse-time ones.
1899 2000-12-12 Jim Wilson <wilson@redhat.com>
1901 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1903 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1904 (print_dependency_table): Print NULL if semantics field not set.
1905 (insert_opcode_dependencies): Mark cmp parameter as unused.
1906 (print_main_table): Use fprintf_vma to print long long fields.
1907 (main): Mark argv paramter as unused. Convert to old style definition.
1908 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1909 * ia64-asmtab.c: Regnerate.
1911 2000-12-09 Nick Clifton <nickc@redhat.com>
1913 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1916 * fr30-dis.c: Regenerate.
1918 2000-12-08 Peter Targett <peter.targett@arccores.com>
1920 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1921 * Makefile.am (C_FILES): Add arc-ext.c.
1922 (ALL_MACHINES) Add arc-ext.lo.
1923 (INCLUDES) Add opcode directory to list.
1924 New dependency entry for arc-ext.lo.
1925 * disassemble.c (disassembler): Correct call to
1926 arc_get_disassembler.
1927 * arc-opc.c: New update for ARC, including full base
1928 instructions for ARC variants.
1929 * arc-dis.h, arc-dis.c: New update for ARC, including
1930 extensibility functionality.
1931 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1933 2000-12-03 Chris Demetriou cgd@sibyte.com
1935 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1936 MOD_HILO, and MOD_LO macros.
1938 * mips-opc.c (M1, M2): Delete.
1939 (mips_builtin_opcodes): Remove all uses of M1.
1941 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1942 instructions take "G" format second operands and use the
1944 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1946 Delete "sel" code operands from mfc1 and mtc1.
1947 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1950 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1951 Chris Demetriou cgd@sibyte.com
1953 * mips-opc.c (mips_builtin_opcodes): Finish additions
1954 for MIPS32 support, and clean up existing entries for
1955 aesthetics, consistency with the MIPS32 ISA, and
1956 with consistency the rest of the table.
1958 2000-12-01 Nick Clifton <nickc@redhat.com>
1960 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1963 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1965 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1966 specifiers. Update 'B' for new constant names, and remove
1968 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1969 near the top of the array, so they are disassembled properly.
1970 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1971 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1972 specifier. Add 'H' format specifier variants for "mfc1,"
1973 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1974 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1975 "wait" variant which uses 'J' operand specifier.
1977 * mips-dis.c (set_mips_isa_type): Update to use
1978 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1979 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1980 * mips-opc.c (I32): New constant for instructions added in
1983 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1985 * mips-dis.c (set_mips_isa_type): Add cases for
1986 bfd_mach_mips5 and bfd_mach_mips64.
1987 * mips-opc.c (I64): New definitions.
1989 * mips-dis.c (set_mips_isa_type): Add case for
1992 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1994 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1995 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1996 Initialize variable dc to NULL.
1997 (print_insn_shx): Remove unused label d_reg_n.
1999 2000-11-24 Nick Clifton <nickc@redhat.com>
2001 * arm-opc.h: Add new opcode formatting parameter 'B'.
2002 (arm_opcodes): Add XScale, v5, and v5te instructions.
2003 (thumb_opcodes): Add v5t instructions.
2005 * arm-dis.c (print_insn_arm): Handle new 'B' format
2007 (print_insn_thumb): Decode BLX(1) instruction.
2009 2000-11-21 Chris Demetriou <cgd@sibyte.com>
2011 * mips-opc.c: Fix file header comment.
2013 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
2015 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
2016 print_insn_cris_with_register_prefix.
2018 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
2020 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
2022 2000-11-07 Matthew Green <mrg@redhat.com>
2024 * cgen-dis.in (print_insn): All insns which can fit into insn_value
2025 must be loaded there in their entirety.
2027 2000-10-20 Jakub Jelinek <jakub@redhat.com>
2029 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
2030 (compute_arch_mask): Add v8plusb and v9b machines.
2031 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
2032 * sparc-opc.c: Support for Cheetah instruction set.
2033 (prefetch_table): Add #invalidate.
2035 2000-10-16 Nick Clifton <nickc@redhat.com>
2037 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
2039 2000-10-06 Dave Brolley <brolley@redhat.com>
2041 * fr30-desc.h: Regenerate.
2042 * m32r-desc.h: Regenerate.
2043 * m32r-ibld.c: Regenerate.
2045 2000-10-05 Jim Wilson <wilson@redhat.com>
2047 * ia64-ic.tbl: Update from Intel.
2048 * ia64-asmtab.c: Regenerate.
2050 2000-10-04 Kazu Hirata <kazu@hxi.com>
2052 * ia64-gen.c: Convert C++-style comments to C-style comments.
2053 * tic54x-dis.c: Likewise.
2055 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
2057 Changes to add dollar prefix to registers for files where user symbols
2058 don't have a leading underscore. Fix formatting.
2059 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
2060 (format_reg): Add parameter with_reg_prefix. All callers changed.
2061 (print_with_operands): Ditto.
2062 (print_insn_cris_generic): Renamed from print_insn_cris, add
2063 parameter with_reg_prefix.
2064 (print_insn_cris_with_register_prefix,
2065 print_insn_cris_without_register_prefix, cris_get_disassembler):
2067 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
2069 2000-09-22 Jim Wilson <wilson@redhat.com>
2071 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
2072 gt, ge, ngt, and nge.
2073 * ia64-asmtab.c: Regenerate.
2075 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
2076 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
2077 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
2078 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
2079 * ia64-asmtab.c: Regnerate.
2081 2000-09-13 Anders Norlander <anorland@acc.umu.se>
2083 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
2084 Add mfc0 and mtc0 with sub-selection values.
2085 Add clo and clz opcodes.
2086 Add msub and msubu instructions for MIPS32.
2087 Add madd/maddu aliases for mad/madu for MIPS32.
2088 Support wait, deret, eret, movn, pref for MIPS32.
2089 Support tlbp, tlbr, tlbwi, tlbwr.
2092 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
2093 (print_insn_arg): Handle 'H' args.
2094 (set_mips_isa_type): Recognize 4K.
2095 Use CPU_* defines instead of hardcoded numbers.
2097 2000-09-11 Catherine Moore <clm@redhat.com>
2099 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
2100 (d30v_format_tab): Use Rb2 for modinc and moddec.
2102 2000-09-07 Catherine Moore <clm@redhat.com>
2104 * d30v-opc.c (d30v_format_tab): Use format Ra for
2107 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
2109 * configure: Rebuilt with new libtool.m4.
2111 2000-09-05 Nick Clifton <nickc@redhat.com>
2113 * configure: Regenerate.
2114 * po/opcodes.pot: Regenerate.
2116 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
2118 * acinclude.m4: Include libtool and gettext macros from the
2120 * aclocal.m4, configure: Rebuilt.
2122 2000-08-30 Kazu Hirata <kazu@hxi.com>
2124 * tic80-dis.c: Fix formatting.
2126 2000-08-29 Kazu Hirata <kazu@hxi.com>
2128 * w65-dis.c: Fix formatting.
2130 2000-08-28 Mark Hatle <mhatle@mvista.com>
2132 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
2133 (powerpc_opcodes): Add table entries for PPC 405 instructions.
2134 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2135 instructions. Added extended mnemonic mftbl as defined in the
2136 405GP manual for all PPCs.
2138 2000-08-28 Jim Wilson <wilson@redhat.com>
2140 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2141 call. Change last goto to use failed instead of done.
2143 2000-08-28 Dave Brolley <brolley@redhat.com>
2145 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2146 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2147 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2148 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2149 * cgen-dis.in (read_insn): New static function.
2150 (print_insn): Use read_insn to read the insn into the buffer and set
2152 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2154 * fr30-asm.c: Regenerated.
2155 * fr30-desc.c: Regenerated.
2156 * fr30-desc.h: Regenerated.
2157 * fr30-dis.c: Regenerated.
2158 * fr30-ibld.c: Regenerated.
2159 * fr30-opc.c: Regenerated.
2160 * fr30-opc.h: Regenerated.
2161 * m32r-asm.c: Regenerated.
2162 * m32r-desc.c: Regenerated.
2163 * m32r-desc.h: Regenerated.
2164 * m32r-dis.c: Regenerated.
2165 * m32r-ibld.c: Regenerated.
2166 * m32r-opc.c: Regenerated.
2168 2000-08-28 Kazu Hirata <kazu@hxi.com>
2170 * tic30-dis.c: Fix formatting.
2172 2000-08-27 Kazu Hirata <kazu@hxi.com>
2174 * sh-dis.c: Fix formatting.
2176 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2178 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2180 2000-08-24 Kazu Hirata <kazu@hxi.com>
2182 * z8k-dis.c: Fix formatting.
2184 2000-08-16 Jim Wilson <wilson@redhat.com>
2186 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2187 break, mov-immediate, nop.
2188 * ia64-opc-f.c: Delete fpsub instructions.
2189 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2190 address operand. Rewrite using macros to avoid long lines.
2191 * ia64-opc.h (POSTINC): Define.
2192 * ia64-asmtab.c: Regenerate.
2194 2000-08-15 Jim Wilson <wilson@redhat.com>
2196 * ia64-ic.tbl: Add missing entries.
2198 2000-08-08 Jason Eckhardt <jle@redhat.com>
2200 * i860-dis.c (print_br_address): Change third argument from int
2203 2000-08-07 Richard Henderson <rth@redhat.com>
2205 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2206 for MLI templates. Handle IA64_OPND_TGT64.
2208 2000-08-04 Ben Elliston <bje@redhat.com>
2210 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2211 * cgen.sh: Likewise.
2213 2000-08-02 Jim Wilson <wilson@redhat.com>
2215 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2217 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2219 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2220 Change return type from void to int. Check the combination
2221 of operands, return 1 if valid. Fix to avoid BUF overflow.
2222 Report undefined combinations of operands in COMMENT.
2223 Report internal errors to stderr. Output the adiw/sbiw
2224 constant operand in both decimal and hex.
2225 (print_insn_avr): Disassemble ldd/std with displacement of 0
2226 as ld/st. Check avr_operand () return value, handle invalid
2227 combinations of operands like unknown opcodes.
2229 2000-07-28 Ben Elliston <bje@redhat.com>
2231 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2232 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2233 * Makefile.in: Regenerate.
2234 * configure.in: Add --enable-cgen-maint option.
2235 * configure: Regenerate.
2237 2000-07-26 Dave Brolley <brolley@redhat.com>
2239 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2240 (cgen_hw_lookup_by_num): Ditto.
2241 (cgen_operand_lookup_by_name): Ditto.
2242 (print_address): Ditto.
2243 (print_keyword): Ditto.
2244 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2246 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2248 (cgen_parse_keyword): Ditto.
2250 2000-07-22 Jason Eckhardt <jle@redhat.com>
2252 * i860-dis.c: New file.
2253 (print_insn_i860): New function.
2254 (print_br_address): New function.
2255 (sign_extend): New function.
2256 (BITWISE_OP): New macro.
2257 (I860_REG_PREFIX): New macro.
2258 (grnames, frnames, crnames): New structures.
2260 * disassemble.c (ARCH_i860): Define.
2261 (disassembler): Add check for bfd_arch_i860 to set disassemble
2262 function to print_insn_i860.
2264 * Makefile.in (CFILES): Added i860-dis.c.
2265 (ALL_MACHINES): Added i860-dis.lo.
2266 (i860-dis.lo): New dependences.
2268 * configure.in: New bits for bfd_i860_arch.
2270 * configure: Regenerated.
2272 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2274 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2275 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2276 (cris-dis.lo, cris-opc.lo): New rules.
2277 * Makefile.in: Rebuild.
2278 * configure.in (bfd_cris_arch): New target.
2279 * configure: Rebuild.
2280 * disassemble.c (ARCH_cris): Define.
2281 (disassembler): Support ARCH_cris.
2282 * cris-dis.c, cris-opc.c: New files.
2283 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2285 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2287 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2288 Reported by Bill Clarke <llib@computer.org>.
2290 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2292 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2293 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2295 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2297 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2298 fput_const, extract_3, extract_5_load, extract_5_store,
2299 extract_5r_store, extract_5R_store, extract_10U_store,
2300 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2301 extract_12, extract_17, extract_22): Prototype.
2302 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2303 shadowing outer block.
2306 2000-07-05 DJ Delorie <dj@redhat.com>
2310 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2312 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2314 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2316 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2317 marked for translation (exception from the usual coding style).
2318 (print_insn_avr): Initialize insn2 to avoid warnings.
2320 2000-07-03 Kazu Hirata <kazu@hxi.com>
2322 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2323 * h8500-dis.c: Fix formatting.
2325 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2327 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2328 (CLEANFILES): Add DEPA.
2329 * Makefile.in: Regenerate.
2331 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2333 * arm-dis.c (regnames): Add an additional register set to match
2334 the set used by GCC. Make it the default.
2336 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2338 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2340 * Makefile.in: Regenerate.
2342 2000-06-20 H.J. Lu <hjl@gnu.org>
2344 * Makefile.am: Rebuild dependency.
2345 * Makefile.in: Rebuild.
2347 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2349 * Makefile.in, configure: regenerate
2350 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2352 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2354 * configure.in: Recognize m68hc12 and m68hc11.
2355 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2356 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2357 and opcode generation for m68hc11 and m68hc12.
2359 2000-06-16 Nick Duffek <nsd@redhat.com>
2361 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2362 bfd_mach_ppc_620 instead of 620.
2364 2000-06-12 Kazu Hirata <kazu@hxi.com>
2366 * h8300-dis.c: Fix formatting.
2367 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2370 2000-06-09 Denis Chertykov <denisc@overta.ru>
2372 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2374 2000-06-07 Denis Chertykov <denisc@overta.ru>
2376 * avr-dis.c: completely rewritten.
2378 2000-06-02 Kazu Hirata <kazu@hxi.com>
2380 * h8300-dis.c: Follow the GNU coding style.
2381 (bfd_h8_disassemble) Fix a typo.
2383 2000-06-01 Kazu Hirata <kazu@hxi.com>
2385 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2386 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2387 correctly. Fix a typo.
2389 2000-05-31 Nick Clifton <nickc@redhat.com>
2391 * opintl.h (_(String)): Explain why dgettext is used instead of
2394 2000-05-30 Nick Clifton <nickc@redhat.com>
2396 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2397 bindtextdomain): Replace defines with those from intl/libgettext.h
2398 to quieten gcc warnings.
2400 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2402 * Makefile.am: Update dependencies with "make dep-am"
2403 * Makefile.in: Regenerate.
2405 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2407 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2408 sign-extending operands.
2410 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2412 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2415 2000-05-21 Nick Clifton <nickc@redhat.com>
2417 * Makefile.am (LIBIBERTY): Define.
2419 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2421 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2422 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2423 (reg_names): Rename to std_reg_names. Change it to a char **
2425 (std_reg_names): New name for reg_names.
2426 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2429 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2431 * fr30-desc.h: Partially regenerated to account for changed
2432 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2433 * m32r-desc.h: Ditto.
2435 2000-05-15 Nick Clifton <nickc@redhat.com>
2437 * arm-opc.h: Use upper case for flasg in MSR and MRS
2438 instructions. Allow any bit to be set in the field_mask of
2439 the MSR instruction.
2441 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2442 field_mask of an MSR instruction.
2444 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2446 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2447 instructions changed to ldrsb/ldrsh.
2449 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2451 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2452 target addresses for 'jal' and 'j'.
2454 2000-05-10 Geoff Keating <geoffk@redhat.com>
2456 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2457 also available in common mode when powerpc syntax is being used.
2459 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2461 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2462 (dummy_print_address): Ditto.
2464 2000-05-04 Timothy Wall <twall@redhat.com>
2466 * tic54x-opc.c: New.
2467 * tic54x-dis.c: New.
2468 * disassemble.c (disassembler): Add ARCH_tic54x.
2469 * configure.in: Added tic54x target.
2471 * Makefile.am: Add tic54x dependencies.
2472 * Makefile.in: Ditto.
2474 2000-05-03 J.T. Conklin <jtc@redback.com>
2476 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2477 vector unit operands.
2478 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2479 unit instruction formats.
2480 (PPCVEC): New macro, mask for vector instructions.
2481 (powerpc_operands): Add table entries for above operand types.
2482 (powerpc_opcodes): Add table entries for vector instructions.
2484 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2485 (print_insn_little_powerpc): Likewise.
2486 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2488 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2490 * configure.in: Add bfd_powerpc_64_arch.
2491 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2494 2000-04-24 Nick Clifton <nickc@redhat.com>
2496 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2499 2000-04-23 Denis Chertykov <denisc@overta.ru>
2501 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2503 (reg_fmul_r): New. Extract source register from FMUL instruction.
2504 (reg_muls_d): New. Extract destination register from MULS instruction.
2505 (reg_muls_r): New. Extract source register from MULS instruction.
2506 (reg_movw_d): New. Extract destination register from MOVW instruction.
2507 (reg_movw_r): New. Extract source register from MOVW instruction.
2508 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2509 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2511 2000-04-22 Timothy Wall <twall@redhat.com>
2513 * ia64-gen.c (general): Add an ordered table of primary
2514 opcode names, as well as priority fields to disassembly data
2515 structures to enforce a preferred disassembly format based on the
2516 ordering of the opcode tables.
2517 (load_insn_classes): Show a useful message if IC tables are missing.
2518 (load_depfile): Ditto.
2519 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2520 distinguish preferred disassembly.
2521 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2522 format. Fix incorrect flag on fma.s/fma.s.s0.
2523 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2524 the highest priority.
2525 * ia64-opc-b.c: Use more abbreviations.
2526 * ia64-asmtab.c: Regenerate.
2528 2000-04-21 Jason Eckhardt <jle@redhat.com>
2530 * hppa-dis.c (extract_16): New function.
2531 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2532 new operand types l,y,&,fe,fE,fx.
2534 2000-04-21 Richard Henderson <rth@redhat.com>
2535 David Mosberger <davidm@hpl.hp.com>
2536 Timothy Wall <twall@redhat.com>
2537 Bob Manson <manson@charmed.cygnus.com>
2538 Jim Wilson <wilson@redhat.com>
2540 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2541 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2542 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2544 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2545 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2546 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2547 * Makefile.in: Rebuild.
2548 * configure Rebuild.
2549 * configure.in (bfd_ia64_arch): New target.
2550 * disassemble.c (ARCH_ia64): Define.
2551 (disassembler): Support ARCH_ia64.
2552 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2553 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2554 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2555 ia64-war.tbl, ia64-waw.tbl: New files.
2557 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2559 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2560 (disassemble): Use them.
2562 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2564 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2565 * Makefile.am: Update dependencies.
2566 * Makefile.in: Regenerate.
2568 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2570 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2571 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2572 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2573 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2574 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2575 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2576 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2577 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2578 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2579 ansidecl.h as sysdep.h includes it.
2581 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2583 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2584 --enable-build-warnings option.
2585 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2586 * Makefile.in, configure: Re-generate.
2588 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2590 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2591 stc GBR,@-<REG_N> is available for arch_sh1_up.
2592 Group parallel processing insn with identical mnemonics together.
2593 Make three-operand psha / pshl come first.
2595 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2597 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2598 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2599 (sh_arg_type): Add A_PC.
2600 (sh_table): Update entries using immediates. Add repeat.
2601 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2602 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2604 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2606 * po/opcodes.pot: Regenerate.
2608 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2609 (DEP): Quote when passing vars to sub-make. Add warning message
2611 (DEP1): Rewrite for "gcc -MM".
2612 (CLEANFILES): Add DEP2.
2613 Update dependencies.
2614 * Makefile.in: Regenerate.
2616 2000-04-03 Denis Chertykov <denisc@overta.ru>
2618 * avr-dis.c: Syntax cleanup.
2619 (add0fff): Print the pc relative address as a signed number.
2620 (add03f8): Likewise.
2622 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2624 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2625 the parameter ATTRIBUTE_UNUSED.
2626 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2628 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2630 * m10300-opc.c: SP-based offsets are always unsigned.
2632 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2634 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2635 [branch always] instead of "undefined".
2637 2000-03-27 Nick Clifton <nickc@redhat.com>
2639 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2640 short instructions, from end of list of long instructions.
2642 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2644 * Makefile.am (CFILES): Add avr-dis.c.
2645 (ALL_MACHINES): Add avr-dis.lo.
2647 2000-03-27 Alan Modra <alan@linuxcare.com>
2649 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2651 (print_insn_avr): Call function via pointer in K&R compatible way.
2652 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2653 add0fff, add03f8): Convert to old style function declaration and
2655 (avrdis_opcode): Add prototype.
2657 2000-03-27 Denis Chertykov <denisc@overta.ru>
2659 * avr-dis.c: New file. AVR disassembler.
2660 * configure.in (bfd_avr_arch): New architecture support.
2661 * disassemble.c: Likewise.
2662 * configure: Regenerate.
2664 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2666 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2668 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2670 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2671 flag to determine if operand is pc-relative.
2673 (d30v_format_table):
2674 (REL6S3): Renamed from IMM6S3.
2675 Added flag OPERAND_PCREL.
2676 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2677 added flag OPERAND_PCREL.
2678 (IMM12S3U): Replaced with REL12S3.
2679 (SHORT_D2, LONG_D): Delay target is pc-relative.
2680 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2681 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2682 using the REL* operands.
2683 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2684 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2685 LONG_Db, using REL* operands.
2686 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2687 (d30v_opcode_table): Use new *r formats.
2689 2000-02-28 Nick Clifton <nickc@redhat.com>
2691 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2692 'signed_overflow_ok_p'.
2694 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2696 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2697 name of the libtool directory.
2698 * Makefile.in: Rebuild.
2700 2000-02-24 Nick Clifton <nickc@redhat.com>
2702 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2703 (cgen_clear_signed_overflow_ok): New function.
2704 (cgen_signed_overflow_ok_p): New function.
2706 2000-02-23 Andrew Haley <aph@redhat.com>
2708 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2709 m32r-ibld.c, m32r-opc.h: Rebuild.
2711 2000-02-23 Linas Vepstas <linas@linas.org>
2713 * i370-dis.c, i370-opc.c: New.
2715 * disassemble.c (ARCH_i370): Define.
2716 (disassembler): Handle it.
2718 * Makefile.am: Add support for Linux/IBM 370.
2719 * configure.in: Likewise.
2721 * Makefile.in: Regenerate.
2722 * configure: Likewise.
2724 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2726 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2727 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2730 2000-02-22 Andrew Haley <aph@redhat.com>
2732 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2734 * mips-opc.c (G6): New define.
2735 (mips_builtin_op): Add "move" definition for -gp32.
2737 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2739 From Grant Erickson <gerickso@Brocade.COM>:
2740 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2742 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2744 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2747 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2749 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2750 (print_insn_ppi): Likewise.
2751 (print_insn_shx): Use info->mach to select appropriate insn set.
2752 Add support for sh-dsp. Remove FD_REG_N support.
2753 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2754 (sh_arg_type): Likewise. Remove FD_REG_N.
2755 (sh_dsp_reg_nums): New enum.
2756 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2757 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2758 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2759 (arch_sh3_dsp_up): Likewise.
2760 (sh_opcode_info): New field: arch.
2761 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2762 D_REG_N. Fill in arch field. Add sh-dsp insns.
2764 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2766 * arm-dis.c: Change flavor name from atpcs-special to
2767 special-atpcs to prevent name conflict in gdb.
2768 (get_arm_regname_num_options, set_arm_regname_option,
2769 get_arm_regnames): New functions. API to access the several
2770 flavor of register names. Note: Used by gdb.
2771 (print_insn_thumb): Use the register name entry from the currently
2772 selected flavor for LR and PC.
2774 2000-02-10 Nick Clifton <nickc@redhat.com>
2776 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2778 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2779 "mulsh.h" instructions.
2780 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2782 (print_insn_mcore): Add support for little endian targets.
2783 Add support for MULSH and OPSR classes.
2785 2000-02-07 Nick Clifton <nickc@redhat.com>
2787 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2788 Previous delat did not take.
2790 2000-02-03 Timothy Wall <twall@redhat.com>
2792 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2793 to adjust target address bounds checking and calculate the
2794 appropriate octet offset into data.
2796 2000-01-27 Nick Clifton <nickc@redhat.com>
2798 * arm-dis.c: (parse_disassembler_option): Rename to
2799 parse_arm_disassembler_option and allow to be exported.
2801 * disassemble.c (disassembler_usage): New function: Print out any
2802 target specific disassembler options.
2803 Call arm_disassembler_options() if the ARM architecture is being
2806 * arm-dis.c (NUM_ELEM): Define this macro if not already
2808 (arm_regname): New struct type for ARM register names.
2809 (arm_toggle_regnames): Delete.
2810 (parse_disassembler_option): Use register name structure.
2811 (print_insn): New function: Combines duplicate code found in
2812 print_insn_big_arm and print_insn_little_arm.
2813 (print_insn_big_arm): Call print_insn.
2814 (print_insn_little_arm): Call print_insn.
2815 (print_arm_disassembler_options): Display list of supported,
2816 ARM specific disassembler options.
2818 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2820 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2821 ARM_STT_16BIT flag as Thumb code symbols.
2823 * arm-dis.c (printf_insn_little_arm): Ditto.
2825 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2827 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2828 of raw thumb instructions.
2830 2000-01-20 Nick Clifton <nickc@redhat.com>
2832 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2834 2000-01-03 Nick Clifton <nickc@cygnus.com>
2836 * arm-dis.c (streq): New macro.
2837 (strneq): New macro.
2838 (force_thumb): ew local variable.
2839 (parse_disassembler_option): New function: Parse a single, ARM
2840 specific disassembler command line switch.
2841 (parse_disassembler_option): Call parse_disassembler_option to
2842 parse individual command line switches.
2843 (print_insn_big_arm): Check force_thumb.
2844 (print_insn_little_arm): Check force_thumb.
2846 For older changes see ChangeLog-9899
2852 version-control: never
projects / binutils-gdb.git / blob