opcodes/ChangeLog

   1 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
   2
   3         * i386-gen.c (opcode_modifiers): Add IsLockable.
   4
   5         * i386-opc.h (IsLockable): New.
   6         (i386_opcode_modifier): Add islockable.
   7
   8         * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
   9         bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
  10         xor, xadd and xchg.
  11         * i386-tbl.h: Regenerated.
  12
  13 2009-11-12  Daniel Jacobowitz  <dan@codesourcery.com>
  14
  15         * arm-dis.c (coprocessor_opcodes): Use %A instead of %C.  Remove
  16         generic coprocessor instructions for FPA loads and stores.
  17         (print_insn_coprocessor): Remove %C support.  Display address for
  18         PC-relative offsets in %A.
  19
  20 2009-11-11  H.J. Lu  <hongjiu.lu@intel.com>
  21
  22         * i386-dis.c (all_prefixes): New.
  23         (ckprefix): Set all_prefixes.
  24         (print_insn): Print all_prefixes instead of lock_prefix,
  25         repz_prefix, repnz_prefix, addr_prefix and data_prefix.
  26
  27 2009-11-11  Nick Clifton  <nickc@redhat.com>
  28
  29         PR binutils/10924
  30         * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
  31         (print_insn_arm): Extend %s format control code to check for
  32         unpredictable addressing modes.  Add support for %S format control
  33         code which suppresses this check.
  34         (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
  35         (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
  36         PRE_BIT_SET): New macros.
  37         (print_insn_coprocessor): Use the new macros instead of magic
  38         constants.
  39         (print_arm_address): Likewise.
  40         (pirnt_insn_arm): Likewise.
  41         (print_insn_thumb32): Likewise.
  42
  43 2009-11-11  Nick Clifton  <nickc@redhat.com>
  44
  45         * po/id.po: Updated Indonesian translation.
  46
  47 2009-11-10  Maxim Kuvyrkov  <maxim@codesourcery.com>
  48
  49         * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
  50
  51 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
  52
  53         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
  54         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
  55         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
  56         the xop_table.
  57         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
  58         XOP instructions.
  59
  60 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
  61             Quentin Neill  <quentin.neill@amd.com>
  62
  63         * opcodes/i386-dis.c (OP_LWPCB_E): New.
  64         (OP_LWP_E): New.
  65         (OP_LWP_I): New.
  66         (USE_XOP_8F_TABLE): New.
  67         (XOP_8F_TABLE): New.
  68         (REG_XOP_LWPCB): New.
  69         (REG_XOP_LWP): New.
  70         (XOP_09): New.
  71         (XOP_0A): New.
  72         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
  73         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
  74         (xop_table): New.
  75         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
  76         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
  77         to access to the vex_table.
  78         (OP_LWPCB_E): New.
  79         (OP_LWP_E): New.
  80         (OP_LWP_I): New.
  81         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
  82         (cpu_flags): Add CpuLWP.
  83         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
  84         * opcodes/i386-opc.h (CpuLWP): New.
  85         (i386_cpu_flags): Add bit cpulwp.
  86         (VexLWP): New.
  87         (XOP09): New.
  88         (XOP0A): New.
  89         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
  90         * opcodes/i386-opc.tbl (llwpcb): Added.
  91         (lwpval): Added.
  92         (lwpins): Added.
  93
  94 2009-11-04  DJ Delorie  <dj@redhat.com>
  95
  96         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
  97         (mvtcp, mvfcp, opecp): Remove.
  98         * rx-decode.c: Regenerate.
  99         * rx-dis.c (cpen): Remove.
 100
 101 2009-11-03  Doug Evans  <dje@sebabeach.org>
 102
 103         * m32c-desc.c: Regenerate.
 104         * mep-desc.c: Regenerate.
 105
 106 2009-11-02  Paul Brook  <paul@codesourcery.com>
 107
 108         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
 109         Add VFPv4 instructions.
 110
 111 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
 112
 113         * i386-dis.c (OP_VEX_FMA): Removed.
 114         (VexFMA): Removed.
 115         (Vex128FMA): Removed.
 116         (prefix_table): First source operand of FMA4 insns is decoded
 117         with Vex not with VexFMA.
 118         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
 119         when vex.w is set.  Third source operand is decoded with
 120
 121 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
 122
 123         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
 124         * Makefile.in: Regenerate.
 125         * po/POTFILES.in: Regenerate.
 126
 127 2009-10-23  Doug Evans  <dje@sebabeach.org>
 128
 129         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
 130         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
 131         * cgen-bitset.c: Update.
 132         * fr30-desc.h: Regenerate.
 133         * frv-desc.h: Regenerate.
 134         * ip2k-desc.h: Regenerate.
 135         * iq2000-desc.h: Regenerate.
 136         * lm32-desc.h: Regenerate.
 137         * m32c-desc.h: Regenerate.
 138         * m32c-opc.h: Regenerate.
 139         * m32r-desc.h: Regenerate.
 140         * mep-desc.h: Regenerate.
 141         * mt-desc.h: Regenerate.
 142         * openrisc-desc.h: Regenerate.
 143         * xc16x-desc.h: Regenerate.
 144         * xstormy16-desc.h: Regenerate.
 145
 146 2009-10-22  DJ Delorie  <dj@redhat.com>
 147
 148         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
 149         * rx-decode.c: Regenerated.
 150
 151 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 152
 153         PR gas/10775
 154         * i386-dis.c: Document LB, LS and LV macros.
 155         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 156         with the 64-bit displacement or immediate operand.
 157         (putop): Handle LB, LS and LV macros.
 158
 159 2009-10-18  Doug Evans  <dje@sebabeach.org>
 160
 161         * lm32-opinst.c: Regenerate.
 162         * m32c-desc.c: Regenerate.
 163         * m32r-opinst.c: Regenerate.
 164         * openrisc-ibld.c: Regenerate.
 165         * xc16x-desc.c: Regenerate.
 166         * xc16x-desc.h: Regenerate.
 167
 168 2009-10-17  Doug Evans  <dje@sebabeach.org>
 169
 170         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 171         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 172         sorted alphabetically.
 173         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 174         stamp-* rules are sorted alphabetically.
 175         * Makefile.in: Regenerate.
 176
 177 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 178
 179         * i386-opc.h: Use enum instead of nested macros.
 180
 181 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 182
 183         * i386-dis.c: Simplify enums.
 184
 185 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 186             Ineiev <ineiev@gmail.com>
 187
 188         PR binutils/10767
 189         * i386-dis.c: Use enum instead of nested macros.
 190
 191 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 192
 193         * i386-dis.c (MAX_BYTEMODE): Removed.
 194
 195 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 196
 197         PR 969
 198         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 199
 200 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 201
 202         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 203         and vex_w_done.
 204
 205 2009-10-07  Michael Eager  <eager@eagercon.com>
 206
 207         * microblaze-dis.c: Add include for microblaze-dis.h,
 208         eliminate local extern decls.
 209         * microblaze-dis.h: New.
 210
 211 2009-10-06  Nick Clifton  <nickc@redhat.com>
 212
 213         * po/fi.po: Updated Finnish translation.
 214
 215 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 216
 217         * opc2c.c: Include "libiberty.h" and <errno.h>.
 218         (orig_filename): Constify.
 219         (dump_lines): Fix line number directive.
 220         (main): Set orig_filename to basename of input file.  Use
 221         xstrerror.
 222
 223         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 224         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 225         instead of $(EXEEXT).
 226         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 227         $(LINK_FOR_BUILD).  Link with libiberty.
 228         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 229         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 230         * Makefile.in: Regenerated.
 231         * rx-decode.c: Regenerated.
 232
 233 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 234
 235         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 236
 237 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 238
 239         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 240         * i386-tbl.h: Regenerated.
 241
 242 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 243
 244         * ppc-dis.c (ppc_opts): Add "476" entry.
 245         * ppc-opc.c (PPC476): Define.
 246         (powerpc_opcodes): Update mnemonics where required for 476.
 247
 248 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 249
 250         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 251         * ppc-dis.c (ppc_opts): Likewise.
 252         Rename "ppca2" to "a2".
 253
 254 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 255
 256         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 257
 258 2009-09-29  DJ Delorie  <dj@redhat.com>
 259
 260         * Makefile.am: Add RX files.
 261         * configure.in: Add support for RX target.
 262         * disassemble.c: Likewise.
 263         * Makefile.in: Regenerate.
 264         * configure: Regenerate.
 265         * opc2c.c: New file.
 266         * rx-decode.c: New file.
 267         * rx-decode.opc: New file.
 268         * rx-dis.c: New file.
 269
 270 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 271
 272         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 273         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 274
 275 2009-09-25  Michael Eager  <eager@eagercon.com>
 276
 277         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 278         microblaze_decode_insn): Add declarations.
 279         (get_delay_slots_microblaze): Remove.
 280
 281 2009-09-25  Martin Thuresson  <martint@google.com>
 282
 283         Update sources to make arc and arm targets compile cleanly with
 284         -Wc++-compat:
 285         * arc-dis.c Fix casts.
 286         * arc-ext.c: Add casts.
 287         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 288         enum.
 289
 290 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 291
 292         * i386-gen.c (opcode_modifiers): Remove Vex256.
 293         (set_bitfield): Handle XXX=V.
 294
 295         * i386-opc.h (Vex): Update comments.
 296         (Vex256): Removed.
 297         (VexNDS): Updated.
 298         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 299
 300         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 301         * i386-tbl.h: Regenerated.
 302
 303 2009-09-23  Nick Clifton  <nickc@redhat.com>
 304
 305         * po/fr.po: Updated French translation.
 306
 307 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 308             Peter Bergner  <bergner@vnet.ibm.com>
 309
 310         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 311         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 312         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 313         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 314         ici mnemonics.
 315         (ERAT_T): New operand.
 316         (XWC_MASK): New mask.
 317         (XOPL2): New macro.
 318         (PPCA2): Define.
 319
 320 2009-09-18  Nick Clifton  <nickc@redhat.com>
 321
 322         * po/es.po: Updated Spanish translation.
 323         * po/vi.po: Updated Vietnamese translation.
 324
 325 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 326
 327         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 328         disp == -disp.
 329
 330 2009-09-14  Nick Clifton  <nickc@redhat.com>
 331
 332         * po/nl.po: Updated Dutch translation.
 333
 334 2009-09-11  Nick Clifton  <nickc@redhat.com>
 335
 336         * po/opcodes.pot: Updated by the Translation project.
 337
 338 2009-09-11  Martin Thuresson  <martint@google.com>
 339
 340         Updated sources to compile cleanly with -Wc++-compat:
 341         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 342         * ldcref.c: Add casts.
 343         * ldctor.c: Add casts.
 344         * ldexp.c
 345         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 346         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 347         * ldlang.h (enum statement_enum): Move to top level.
 348         * ldmain.c: Add casts.
 349         * ldwrite.c: Add casts.
 350         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 351         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 352
 353 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 354
 355         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 356
 357 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 358
 359         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 360         (print_insn_s390): Signextend and shift pcrel operands before printing.
 361
 362 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 363
 364         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 365         VEX_LEN_AE_R_X_M_0 in comments.
 366
 367 2009-09-08  DJ Delorie  <dj@redhat.com>
 368
 369         * mep-opc.c: Regenerate.
 370
 371 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 372
 373         * z8kgen.c (struct op): Replace unused flavor with id.
 374         (opt): Remove extra xorb entry.
 375         (func): Use id field as fallback.
 376         (sub): Return new string, caller changed.
 377         (internal): Allocate end marker.  Assign unique id before sorting.
 378         (gas): Likewise.  Fix loop end condition.
 379         * z8k-opc.h: Regenerate.
 380
 381 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 382
 383         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 384
 385 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 386
 387         * z8kgen.c (func): Fix thinko last patch.
 388
 389 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 390
 391         * z8kgen.c (func): Stabilize qsort of identically named entries.
 392         * z8k-opc.h: Regenerate.
 393
 394 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 395
 396         * po/opcodes.pot: Regenerate.
 397
 398 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 399
 400         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 401         * configure: Regenerate.
 402         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 403         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 404         (i386-gen, ia64-gen, z8kgen): ..here.
 405         * Makefile.in: Regenerate.
 406
 407 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 408
 409         * z8k-opc.h: Regenerate.
 410
 411 2009-09-05  Martin Thuresson  <martin@mtme.org>
 412
 413         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 414         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 415         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 416         Rename argument class to symbol_class.
 417
 418 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 419
 420         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 421         to the new encoding of DBGA, DBGAH, and DBGAL.
 422         (_print_insn_bfin): Likewise.
 423
 424 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 425
 426         * bfin-dis.c (_print_insn_bfin): Don't declare.
 427         (print_insn_bfin): Don't declare.
 428         (dregs_pair): Remove.
 429         (ignore_bits): Remove.
 430         (ccstat): Remove.
 431
 432 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 433
 434         * bfin-dis.c (IS_DREG): Define.
 435         (IS_PREG): Define.
 436         (IS_AREG): Define.
 437         (IS_GENREG): Define.
 438         (IS_DAGREG): Define.
 439         (IS_SYSREG): Define.
 440         (decode_REGMV_0): Check illegal register move instructions.
 441
 442 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 443
 444         * Makefile.am (BUILD_LIBINTL): New variable.
 445         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 446         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 447         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 448         * Makefile.in: Regenerate.
 449
 450 2009-09-01  DJ Delorie  <dj@redhat.com>
 451
 452         * mep-asm.c: Regenerate.
 453         * mep-desc.c: Regenerate.
 454         * mep-opc.c: Regenerate.
 455
 456 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 457
 458         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 459         dependencies.  Remove unused FORMAT variable.
 460         * configure.com: New file to create build.com DCL script for
 461         Itanium VMS or Alpha VMS.
 462
 463 2009-08-29  Martin Thuresson  <martin@mtme.org>
 464
 465         * cris-dis.c (bytes_to_skip): Update code to use new name.
 466         * i386-dis.c (putop): Update code to use new name.
 467         * i386-gen.c (process_i386_opcodes): Update code to use
 468         new name.
 469         * i386-opc.h (struct template): Rename struct template to
 470         insn_template. Update code accordingly.
 471         * i386-tbl.h (i386_optab): Update type to use new name.
 472         * ia64-dis.c (print_insn_ia64): Rename variable template
 473         to template_val.
 474         * tic30-dis.c (struct instruction, get_tic30_instruction):
 475         Update code to use new name.
 476         * tic54x-dis.c (has_lkaddr, get_insn_size)
 477         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 478         Update code to use new name.
 479         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 480         Update type to new name.
 481         * z8kgen.c (internal, gas): Rename variable new to new_op.
 482
 483 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 484
 485         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 486         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 487         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 488         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 489         * Makefile.in: Regenerated.
 490
 491 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 492
 493         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 494         [INSTALL_LIBBFD]: ... here, ...
 495         [INSTALL_LIBBFD]: ... and empty overrides here.
 496         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 497         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 498         * Makefile.in: Regenerate.
 499         * configure: Regenerate.
 500
 501 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 502
 503         * m68k-dis.c (print_insn_arg): Add movecr register names for
 504         coldfire v4e families.
 505
 506 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 507
 508         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 509         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 510         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 511         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 512         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 513         (i386-gen.o): New rule.
 514         ($(srcdir)/i386-init.h): Adjust.
 515         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 516         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 517         (ia64-gen.o): New rule.
 518         (ia64_asmtab_deps): New variable.
 519         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 520         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 521         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 522         likewise.
 523         (s390-opc.tab): Adjust.
 524         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 525         rules.
 526         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 527         * Makefile.in: Regenerate.
 528         * z8kgen.c (gas): Avoid '/*' in comment.
 529         * z8k-opc.h (func): Regenerate.
 530
 531 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 532
 533         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 534         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 535         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 536         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 537         msp430-dis.c added.
 538         (LIBOPCODES_CFILES): New variable, adding to
 539         TARGET_LIBOPCODES_CFILES also non-target library sources.
 540         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 541         files.
 542         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 543         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 544         * Makefile.in: Regenerate.
 545         * po/POTFILES.in: Regenerate.
 546
 547 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 548
 549         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 550         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 551         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 552         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 553         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 554         is built shared even if it is not to be installed.
 555         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 556         (install_libopcodes, uninstall_libopcodes): Remove.
 557         (AM_CPPFLAGS): Renamed from ...
 558         (INCLUDES): ... this.
 559         * Makefile.in: Regenerate.
 560
 561         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 562         1.11, foreign, no-dist.
 563         (MKDEP, m32c_opc_h): Remove variables.
 564         (disassemble.lo): Rewrite using automake-style dependency
 565         tracking rules; only list the dependency upon the primary source
 566         file, but no included headers.
 567         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 568         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 569         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 570         ensure all dependency fragments are included in the Makefile.
 571         (s390-opc.lo): Depend on s390-opc.tab.
 572         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 573         (mkdep section): Remove.
 574         * Makefile.in: Regenerate.
 575         * po/POTFILES.in: Regenerate.
 576
 577         * Makefile.am (install-pdf, install-html): Remove.
 578         * Makefile.in: Regenerate.
 579
 580         * Makefile.in: Regenerate.
 581         * aclocal.m4: Likewise.
 582         * config.in: Likewise.
 583         * configure: Likewise.
 584
 585 2009-08-06  Michael Eager <eager@eagercon.com>
 586
 587         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 588         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 589         * Makefile.in: Regenerate.
 590         * configure.in: Add bfd_microblaze_arch target.
 591         * configure: Regenerate.
 592         * disassemble.c: Define ARCH_microblaze, return
 593         print_insn_microblaze().
 594         * microblaze-dis.c: New MicroBlaze disassembler.
 595         * microblaze-opc.h: New MicroBlaze opcode definitions.
 596         * microblaze-opcm.h: New MicroBlaze opcode types.
 597
 598 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 599
 600         * configure.in: Handle bfd_l1om_arch.
 601         * disassemble.c (disassembler): Likewise.
 602
 603         * configure: Regenerated.
 604
 605         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 606         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 607
 608         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 609         Add CPU_L1OM_FLAGS.
 610         (cpu_flags): Add CpuL1OM.
 611         (set_bitfield): Take an argument to set the value field.
 612         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 613         (process_i386_opcode_modifier): Updated.
 614         (process_i386_operand_type): Likewise.
 615         * i386-init.h: Regenerated.
 616         * i386-tbl.h: Likewise.
 617
 618         * i386-opc.h (CpuL1OM): New.
 619         (CpuXsave): Updated.
 620         (i386_cpu_flags): Add cpul1om.
 621
 622 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 623
 624         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 625         frstpm.
 626         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 627         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 628         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 629         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 630         Define.
 631         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 632         and cpufisttp.
 633         * i386-opc.tbl: Qualify floating point instructions by their
 634         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 635         and fsincos to be avilable only on 387. Fix fstsw ax to be
 636         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 637         and frstpm.
 638         * i386-init.h, i386-tbl.h: Regenerate.
 639
 640 2009-07-20  Nick Clifton  <nickc@redhat.com>
 641
 642         PR 10288
 643         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 644         offset or indexed based addressing mode 3.
 645
 646 2009-07-14  Nick Clifton  <nickc@redhat.com>
 647
 648         PR 10288
 649         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 650         patterns.
 651         (arm_decode_shift): Catch illegal register based shifts.
 652         (print_insn_arm): Properly handle negative register r0
 653         post-indexed addressing.
 654
 655 2009-07-10  Doug Kwan  <dougkwan@google.com>
 656
 657         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 658         lower 32 bits of long types to make hexadecimal output consistent
 659         on both 32-bit and 64-bit hosts.
 660
 661 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 662
 663         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 664         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 665         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 666         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 667         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 668         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 669         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 670         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 671         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 672         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 673         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 674         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 675
 676 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 677
 678         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 679
 680 2009-07-07  Nick Clifton  <nickc@redhat.com>
 681
 682         PR 10288
 683         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 684         addressing modes.
 685
 686 2009-07-06  DJ Delorie  <dj@redhat.com>
 687
 688         * mep-desc.c: Regenerate.
 689         * mep-desc.h: Regenerate.
 690         * mep-opc.c: Regenerate.
 691         * mep-opc.h: Regenerate.
 692
 693 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 694
 695         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 696         (i386_cpu_flags): New.
 697         * i386-gen.c: Add CPU_FMA4_FLAGS.
 698         * i386-opc.tbl: Add FMA4 instructions.
 699         * i386-tbl.h: Regenerate.
 700         * i386-init.h: Regenerate.
 701         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 702         (OP_XMM_VexW): Ditto.
 703         (OP_EX_VexW): Ditto.
 704         (VEXI4_Fixup): Ditto.
 705         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 706         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 707         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 708         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 709         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 710         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 711         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 712         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 713         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 714         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 715         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 716         (get_vex_imm8): New. handle FMA4.
 717         (OP_EX_VexReg): Ditto.
 718
 719 2009-06-30  Nick Clifton  <nickc@redhat.com>
 720
 721         PR 10288
 722         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 723         LFM and SFM instructions as comments,.
 724         Improve consistency of formatting for instructions displayed as
 725         comments and decimal values displayed with their hexadecimal
 726         equivalents.
 727         Formatting tidy ups.
 728
 729 2009-06-29  Nick Clifton  <nickc@redhat.com>
 730
 731         PR 10288
 732         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 733         boundary between variaant and generic coprocessor instuctions.
 734         (coprocessor): Use it.
 735         Fix architecture version of MCRR and MRRC instructions.
 736         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 737         (print_insn_coprocessor): Check architecture and extension masks.
 738         Print a hexadecimal version of any decimal constant that is
 739         outside of the range of -16 to +32.
 740         (print_arm_address): Add a return value of the offset used in the
 741         adress, if it is worth printing a hexadecimal version of it.
 742         (print_insn_neon): Print a hexadecimal version of any decimal
 743         constant that is outside of the range of -16 to +32.
 744         (print_insn_arm): Likewise.
 745         (print_insn_thumb16): Likewise.
 746         (print_insn_thumb32): Likewise.
 747
 748         PR 10297
 749         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 750         of an undefined instruction.
 751         (arm_opcodes): Use it.
 752         (thumb_opcod): Use it.
 753         (thumb32_opc): Use it.
 754
 755 2009-06-23  DJ Delorie  <dj@redhat.com>
 756
 757         * mep-desc.c: Regenerate.
 758         * mep-desc.h: Regenerate.
 759         * mep-dis.c: Regenerate.
 760         * mep-ibld.c: Regenerate.
 761         * mep-opc.c: Regenerate.
 762
 763         * mep-asm.c: Regenerate.
 764         * mep-opc.c: Regenerate.
 765         * mep-opc.h: Regenerate.
 766
 767 2009-06-22  Nick Clifton  <nickc@redhat.com>
 768
 769         * po/fi.po: Updated Finish translation.
 770
 771 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 772
 773         * m32c-asm.c: Regenerate.
 774
 775 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 776
 777         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 778         case label to proper lexical block.
 779         * score7-dis.c (print_insn_score32): Likewise.
 780
 781 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 782
 783         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 784         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 785         * s390-opc.txt (nopr, nop): Use new instruction format.
 786
 787 2009-06-18  Nick Clifton  <nickc@redhat.com>
 788
 789         PR 10288
 790         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 791         ARM architecture supports the matched instruction.
 792         (print_insn_arm): Likewise.
 793         (select_arm_features): New function.  Fills in the fields of an
 794         arm_feature_set structure based on a given arm machine number.
 795         (print_insn): Initialise an arm_feature_set structure.
 796
 797 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 798
 799         * vax-dis.c (is_function_entry): Return success for synthetic
 800         symbols too.
 801         (is_plt_tail): New function.
 802         (print_insn_vax): Decode PLT entry offset longword.
 803
 804 2009-06-15  Nick Clifton  <nickc@redhat.com>
 805
 806         PR 10186
 807         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 808         instruction.
 809
 810         PR 10173
 811         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 812
 813 2009-06-15  Nick Clifton  <nickc@redhat.com>
 814
 815         PR 10263
 816         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 817         the disassembly of data as well as instructions.
 818
 819 2009-06-11  Doug Evans  <dje@sebabeach.org>
 820
 821         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 822
 823 2009-06-11  Anthony Green  <green@moxielogic.com>
 824
 825         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 826         (moxie_form3_opc_info): Add branch instructions.
 827         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 828         encoded instructions.
 829
 830 2009-06-06  Anthony Green  <green@moxielogic.com>
 831
 832         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 833         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 834
 835 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 836
 837         * dep-in.sed: Don't use \n in replacement part of s command.
 838         * Makefile.am (DEP1): LC_ALL for uniq.
 839         * Makefile.in: Regenerate.
 840
 841 2009-06-02  Nick Clifton  <nickc@redhat.com>
 842
 843         * po/nl.po: Updated Dutch translation.
 844
 845 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 846
 847         * ia64-gen.c (parse_resource_users, print_dependency_table,
 848         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 849         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 850         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 851         insert_completer_entry, print_completer_entry, print_completer_table,
 852         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 853
 854 2009-05-28  DJ Delorie  <dj@redhat.com>
 855
 856         * mep-asm.c: Regenerate.
 857         * mep-desc.c: Regenerate.
 858
 859 2009-05-26  DJ Delorie  <dj@redhat.com>
 860
 861         * mep-asm.c: Regenerate.
 862         * mep-desc.c: Regenerate.
 863         * mep-desc.h: Regenerate.
 864         * mep-dis.c: Regenerate.
 865         * mep-ibld.c: Regenerate.
 866         * mep-opc.c: Regenerate.
 867         * mep-opc.h: Regenerate.
 868
 869 2009-05-26  Nick Clifton  <nickc@redhat.com>
 870
 871         * po/id.po: Updated Indonesian translation.
 872         * po/opcodes.pot: Updated template file.
 873
 874 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 875
 876         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 877         per line with all lines having continuation backslash.  Prefix
 878         first line with "A", following lines with "B".
 879         * Makefile.am (DEP): Don't use dep.sed here.
 880         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 881         dep.sed here on dependencies, sort and uniq.
 882         * Makefile.in: Regenerate.
 883
 884 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 885
 886         * makefile.vms (OPT): New variable.
 887         (CFLAGS): Update compilation flags.
 888
 889 2009-05-22  DJ Delorie  <dj@redhat.com>
 890
 891         * mep-asm.c: Regenerate.
 892         * mep-desc.c: Regenerate.
 893         * mep-desc.h: Regenerate.
 894         * mep-dis.c: Regenerate.
 895         * mep-ibld.c: Regenerate.
 896         * mep-opc.c: Regenerate.
 897         * mep-opc.h: Regenerate.
 898
 899 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 900
 901         * i386-opc.h (Cpusse5): Delete.
 902         (i386_cpu_flags): Delete.
 903         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 904         * i386-opc.tbl: Remove SSE5 instructions.
 905         * i386-tbl.h: Regenerate.
 906         * i386-init.h: Regenerate.
 907         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 908         (print_drex_arg): Delete.
 909         (OP_DREX4): Delete.
 910         (OP_DREX3): Delete.
 911         (OP_DREX_ICMP): Delete.
 912         (OP_DREX_FCMP): Delete.
 913         (DREX_*): Delete.
 914         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 915
 916 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 917
 918         * Makefile.am: Run "make dep-am".
 919         * Makefile.in: Regenerate.
 920         * po/POTFILES.in: Regenerate.
 921
 922 2009-05-19  DJ Delorie  <dj@redhat.com>
 923
 924         * mep-asm.c: Regenerate.
 925         * mep-opc.c: Regenerate.
 926
 927 2009-04-30  DJ Delorie  <dj@redhat.com>
 928
 929         * mep-asm.c: Regenerate.
 930         * mep-desc.c: Regenerate.
 931         * mep-desc.h: Regenerate.
 932         * mep-dis.c: Regenerate.
 933         * mep-ibld.c: Regenerate.
 934         * mep-opc.c: Regenerate.
 935         * mep-opc.h: Regenerate.
 936
 937 2009-04-17  DJ Delorie  <dj@redhat.com
 938
 939         * mep-desc.c: Regenerate.
 940         * mep-ibld.c: Regenerate.
 941         * mep-opc.c: Regenerate.
 942         * mep-opc.h: Regenerate.
 943
 944 2009-04-15  Anthony Green  <green@moxielogic.com>
 945
 946         * moxie-opc.c, moxie-dis.c: Created.
 947         * Makefile.am: Build the moxie source files.
 948         * configure.in: Add moxie support.
 949         * Makefile.in, configure: Rebuilt.
 950         * disassemble.c (disassembler): Add moxie support.
 951         (ARCH_moxie): Define.
 952
 953 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 954
 955         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 956         extension to None.
 957         (pshab, pshaw, pshad, pshaq): Likewise.
 958         * i386-tbl.h: Re-generate.
 959
 960 2009-04-08  DJ Delorie  <dj@redhat.com
 961
 962         * mep-asm.c: Regenerate.
 963         * mep-desc.c: Regenerate.
 964         * mep-desc.h: Regenerate.
 965         * mep-dis.c: Regenerate.
 966         * mep-ibld.c: Regenerate.
 967         * mep-opc.c: Regenerate.
 968         * mep-opc.h: Regenerate.
 969
 970 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 971
 972         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 973         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 974         Reorder entries so the extended mnemonics are listed before tlbilx.
 975
 976 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 977
 978         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 979         due to -many/-Many.
 980         (print_insn_powerpc): Make sure we only deprecate instructions using
 981         the original dialect and not a modified dialect due to -Many handling.
 982         Move the handling of the condition register and default operands to
 983         the end of the if/else if/else chain.
 984         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 985         instructions from newer processors are listed before older ones.
 986         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 987         that have instructions with conflicting opcodes.
 988
 989 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 990
 991         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 992         E500MC entries.
 993
 994 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 995
 996         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 997
 998 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 999
1000         * arm-dis.c (print_insn): Also check section matches in backwards
1001         search for mapping symbol.
1002
1003 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
1004
1005         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1006
1007 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
1008
1009         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1010         * Makefile.am: Run "make dep-am".
1011         * Makefile.in: Regenerate.
1012         * openrisc-opc.c: Regenerate.
1013
1014 2009-03-10  Nick Clifton  <nickc@redhat.com>
1015
1016         * po/id.po: Updated Indonesian translation.
1017
1018 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
1019
1020         * ppc-dis.c: Include "opintl.h".
1021         (struct ppc_mopt, ppc_opts): New.
1022         (ppc_parse_cpu): New function.
1023         (powerpc_init_dialect): Use it.
1024         (print_ppc_disassembler_options): Dump options from ppc_opts.
1025         Internationalize message.
1026
1027 2009-03-06  Nick Clifton  <nickc@redhat.com>
1028
1029         * po/es.po: Updated Spanish translation.
1030
1031 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
1032
1033         PR 6768
1034         * configure.in: Test for ld --as-needed support.  Link shared
1035         libopcodes against libm.
1036         * configure: Regenerate.
1037
1038 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
1039
1040         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1041         instructions from newer processors are listed before older ones.
1042
1043 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
1044
1045         * Makefile.am: Run "make dep-am".
1046         (HFILES): Move lm32-desc.h and lm32-opc.h from..
1047         (CFILES): ..here.
1048         * Makefile.in: Regenerate.
1049
1050 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1051
1052         * score7-dis.c: New file.
1053         * Makefile.am: Add dependencies for score7-dis.c.
1054         * Makefile.in: Regenerate.
1055         * configure.in: Add score7-dis to score files.
1056         * configure: Regenerate.
1057         * score-dis.c: Add support for score7 architecture.
1058         * score-opc.h: Likewise.
1059
1060 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1061
1062         * configure: Regenerate.
1063
1064 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1065
1066         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1067
1068 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1069
1070         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1071         the power7 and the isel instructions.
1072         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1073         (insert_dm, extract_dm): Likewise.
1074         (XB6): Update comment to include XX2 form.
1075         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1076         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1077         (RemoveXX3DM): Delete.
1078         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1079         "mftgpr">: Deprecate for POWER7.
1080         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1081         "frsqrte.">: Deprecate the three operand form and enable the two
1082         operand form for POWER7 and later.
1083         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1084         <"waitsrv", "waitimpl">: Add extended opcodes.
1085         <"ldbrx", "stdbrx">: Enable for POWER7.
1086         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1087         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1088         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1089         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1090         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1091         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1092         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1093         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1094         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1095         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1096         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1097         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1098         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1099         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1100         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1101         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1102         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1103         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1104         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1105         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1106         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1107         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1108         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1109         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1110         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1111         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1112         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1113         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1114         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1115         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1116         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1117         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1118         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1119         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1120         "xxspltw", "xxswapd">: Add VSX opcodes.
1121
1122 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1123
1124         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1125         (operand_types): Remove Vex_Imm4.
1126
1127         * i386-opc.h (Vex_Imm4): Removed.
1128         (OTMax): Updated.
1129         (i386_operand_type): Remove vex_imm4.
1130
1131         * i386-opc.tbl: Remove Vex_Imm4 comments.
1132         * i386-init.h: Regenerated.
1133         * i386-tbl.h: Likewise.
1134
1135 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1136
1137         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1138         vq{r}shr{u}n.s64 insnstructions.
1139
1140 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1141
1142         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1143         operand to be a float point register (FRT/FRS).
1144
1145 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1146
1147         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1148         dmfc2 and dmtc2 before the architecture-level variants.
1149
1150 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1151
1152         * fr30-opc.c: Regenerate.
1153         * frv-opc.c: Regenerate.
1154         * ip2k-opc.c: Regenerate.
1155         * iq2000-opc.c: Regenerate.
1156         * lm32-opc.c: Regenerate.
1157         * m32c-opc.c: Regenerate.
1158         * m32r-opc.c: Regenerate.
1159         * mep-opc.c: Regenerate.
1160         * mt-opc.c: Regenerate.
1161         * xc16x-opc.c: Regenerate.
1162         * xstormy16-opc.c: Regenerate.
1163         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1164         sprintf call.
1165
1166 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1167
1168         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1169
1170 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1171
1172         * ppc-opc.c: Update copyright year.
1173         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1174         ordering for POWER4 and later and use the correct Server ordering.
1175
1176 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1177
1178         AVX Programming Reference (January, 2009)
1179         * i386-dis.c (PREFIX_VEX_3A44): New.
1180         (VEX_LEN_3A44_P_2): Likewise.
1181         (PREFIX_VEX_3A48): Updated.
1182         (VEX_LEN_3A4C_P_2): Likewise.
1183         (prefix_table): Add PREFIX_VEX_3A44.
1184         (vex_table): Likewise.
1185         (vex_len_table): Add VEX_LEN_3A44_P_2.
1186
1187         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1188         * i386-tbl.h: Regenerated.
1189
1190 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1191
1192         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1193         (mips_arch_choices): Add XLR entry.
1194         * mips-opc.c (XLR): Define.
1195         (mips_builtin_opcodes): Add XLR instructions.
1196
1197 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1198
1199         * Makefile.am: Add install-pdf target.
1200         * po/Make-in: Add install-pdf target.
1201         * Makefile.in: Regenerate.
1202
1203 2009-02-02  DJ Delorie  <dj@redhat.com>
1204
1205         * mep-asm.c: Regenerate.
1206         * mep-desc.c: Regenerate.
1207         * mep-desc.h: Regenerate.
1208         * mep-dis.c: Regenerate.
1209         * mep-ibld.c: Regenerate.
1210         * mep-opc.c: Regenerate.
1211         * mep-opc.h: Regenerate.
1212
1213 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1214
1215         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1216         qsub, and qdsub.
1217
1218 2009-01-28  Chao-ying Fu  <fu@mips.com>
1219
1220         * mips-opc.c (suxc1): Add the flag of FP_D.
1221
1222 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1223
1224         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1225         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1226         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1227         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1228         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1229         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1230         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1231         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1232
1233 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1234
1235         * configure.in (commonbfdlib): Delete.
1236         (SHARED_LIBADD): Add pic libiberty if such is available.
1237         * configure: Regenerate.
1238         * po/POTFILES.in: Regenerate.
1239
1240 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1241
1242         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1243         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1244         operand form and enable the four operand form for POWER6 and later.
1245         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1246         three operand form for POWER6 and later.
1247
1248 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1249
1250         * bfin-dis.c (OUTS): Use "%s" as format string.
1251
1252 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1253
1254         * i386-gen.c (cpu_flag_init): Remove a white space.
1255         (operand_type_init): Likewise.
1256
1257 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1258
1259         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1260         * i386-tbl.h: Regenerated.
1261
1262 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1263
1264         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1265         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1266         subS, xorS and cmpS.
1267
1268 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1269
1270         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1271         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1272         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1273         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1274         and CpuSYSCALL.
1275         (lineno): Removed.
1276         (set_bitfield): Take an argument, lineno.  Don't report lineno
1277         on error if it is -1.
1278         (process_i386_cpu_flag): Take an argument, lineno.
1279         (process_i386_opcode_modifier): Likewise.
1280         (process_i386_operand_type): Likewise.
1281         (output_i386_opcode): Likewise.
1282         (opcode_hash_entry): Add lineno.
1283         (process_i386_opcodes): Updated.
1284         (process_i386_registers): Likewise.
1285         (process_i386_initializers): Likewise.
1286
1287         * i386-opc.h (CpuP4): Removed.
1288         (CpuK6): Likewise.
1289         (CpuK8): Likewise.
1290         (CpuClflush): New.
1291         (CpuSYSCALL): Likewise.
1292         (CpuMMX): Updated.
1293         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1294         cpuclflush and cpusyscall.
1295
1296         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1297         syscall and sysret.
1298         * i386-init.h: Regenerated.
1299         * i386-tbl.h: Likewise.
1300
1301 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1302
1303         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1304         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1305         (cpu_flags): Add CpuRdtscp.
1306         (set_bitfield): Remove CpuSledgehammer check.
1307
1308         * i386-opc.h (CpuRdtscp): New.
1309         (CpuLM): Updated.
1310         (i386_cpu_flags): Add cpurdtscp.
1311
1312         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1313         * i386-init.h: Regenerated.
1314         * i386-tbl.h: Likewise.
1315
1316 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1317
1318         * ppc-opc.c (PPCNONE): Define.
1319         (NOPOWER4): Delete.
1320         (powerpc_opcodes): Initialize the new "deprecated" field.
1321
1322 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1323
1324         AVX Programming Reference (December, 2008)
1325         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1326         (VEX_LEN_E7_P_2_M_0): Likewise.
1327         (VEX_LEN_2C_P_1): Updated.
1328         (VEX_LEN_E8_P_2): Likewise.
1329         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1330         (mod_table): Likewise.
1331
1332         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1333         * i386-tbl.h: Regenerated.
1334
1335 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1336
1337         * i386-gen.c (process_copyright): Update for 2009.
1338
1339         * i386-init.h: Regenerated.
1340         * i386-tbl.h: Likewise.
1341
1342 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1343
1344         AVX Programming Reference (December, 2008)
1345         * i386-dis.c (OP_VEX_FMA): Removed.
1346         (OP_EX_VexW): Likewise.
1347         (OP_EX_VexImmW): Likewise.
1348         (OP_XMM_VexW): Likewise.
1349         (VEXI4_Fixup): Likewise.
1350         (VPERMIL2_Fixup): Likewise.
1351         (VexI4): Likewise.
1352         (VexFMA): Likewise.
1353         (Vex128FMA): Likewise.
1354         (EXVexW): Likewise.
1355         (EXdVexW): Likewise.
1356         (EXqVexW): Likewise.
1357         (EXVexImmW): Likewise.
1358         (XMVexW): Likewise.
1359         (VPERMIL2): Likewise.
1360         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1361         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1362         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1363         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1364         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1365         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1366         (get_vex_imm8): Likewise.
1367         (OP_EX_VexReg): Likewise.
1368         vpermil2_op): Likewise.
1369         (EXVexWdq): New.
1370         (vex_w_dq_mode): Likewise.
1371         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1372         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1373         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1374         (es_reg): Updated.
1375         (PREFIX_VEX_38DB): Likewise.
1376         (PREFIX_VEX_3A4A): Likewise.
1377         (PREFIX_VEX_3A60): Likewise.
1378         (PREFIX_VEX_3ADF): Likewise.
1379         (VEX_LEN_3ADF_P_2): Likewise.
1380         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1381         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1382         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1383         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1384         PREFIX_VEX_3896...PREFIX_VEX_389F,
1385         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1386         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1387         (vex_table): Likewise.
1388         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1389         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1390         (putop): Support "%XW".
1391         (intel_operand_size): Handle vex_w_dq_mode.
1392
1393         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1394
1395         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1396         instructions.  Add new FMA instructions.
1397         * i386-tbl.h: Regenerated.
1398
1399 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1400
1401         * or32-opc.c (or32_print_register, or32_print_immediate,
1402         disassemble_insn): Don't rely on undefined sprintf behaviour.
1403
1404 For older changes see ChangeLog-2008
1405 \f
1406 Local Variables:
1407 mode: change-log
1408 left-margin: 8
1409 fill-column: 74
1410 version-control: never
1411 End: