opcodes/ChangeLog

   1 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
   2
   3         * arm-dis.c (print_insn): Check symtab_size not *symtab.
   4
   5 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
   6
   7         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
   8         * i386-tbl.h: Regenerated.
   9
  10 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
  11
  12         * ppc-dis.c (ppc_opts): Add "476" entry.
  13         * ppc-opc.c (PPC476): Define.
  14         (powerpc_opcodes): Update mnemonics where required for 476.
  15
  16 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
  17
  18         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
  19         * ppc-dis.c (ppc_opts): Likewise.
  20         Rename "ppca2" to "a2".
  21
  22 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
  23
  24         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
  25
  26 2009-09-29  DJ Delorie  <dj@redhat.com>
  27
  28         * Makefile.am: Add RX files.
  29         * configure.in: Add support for RX target.
  30         * disassemble.c: Likewise.
  31         * Makefile.in: Regenerate.
  32         * configure: Regenerate.
  33         * opc2c.c: New file.
  34         * rx-decode.c: New file.
  35         * rx-decode.opc: New file.
  36         * rx-dis.c: New file.
  37
  38 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
  39
  40         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
  41         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
  42
  43 2009-09-25  Michael Eager  <eager@eagercon.com>
  44
  45         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
  46         microblaze_decode_insn): Add declarations.
  47         (get_delay_slots_microblaze): Remove.
  48
  49 2009-09-25  Martin Thuresson  <martint@google.com>
  50
  51         Update sources to make arc and arm targets compile cleanly with
  52         -Wc++-compat:
  53         * arc-dis.c Fix casts.
  54         * arc-ext.c: Add casts.
  55         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
  56         enum.
  57
  58 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
  59
  60         * i386-gen.c (opcode_modifiers): Remove Vex256.
  61         (set_bitfield): Handle XXX=V.
  62
  63         * i386-opc.h (Vex): Update comments.
  64         (Vex256): Removed.
  65         (VexNDS): Updated.
  66         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
  67
  68         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
  69         * i386-tbl.h: Regenerated.
  70
  71 2009-09-23  Nick Clifton  <nickc@redhat.com>
  72
  73         * po/fr.po: Updated French translation.
  74
  75 2009-09-21  Ben Elliston  <bje@au.ibm.com>
  76             Peter Bergner  <bergner@vnet.ibm.com>
  77
  78         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
  79         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
  80         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
  81         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
  82         ici mnemonics.
  83         (ERAT_T): New operand.
  84         (XWC_MASK): New mask.
  85         (XOPL2): New macro.
  86         (PPCA2): Define.
  87
  88 2009-09-18  Nick Clifton  <nickc@redhat.com>
  89
  90         * po/es.po: Updated Spanish translation.
  91         * po/vi.po: Updated Vietnamese translation.
  92
  93 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
  94
  95         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
  96         disp == -disp.
  97
  98 2009-09-14  Nick Clifton  <nickc@redhat.com>
  99
 100         * po/nl.po: Updated Dutch translation.
 101
 102 2009-09-11  Nick Clifton  <nickc@redhat.com>
 103
 104         * po/opcodes.pot: Updated by the Translation project.
 105
 106 2009-09-11  Martin Thuresson  <martint@google.com>
 107
 108         Updated sources to compile cleanly with -Wc++-compat:
 109         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 110         * ldcref.c: Add casts.
 111         * ldctor.c: Add casts.
 112         * ldexp.c
 113         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 114         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 115         * ldlang.h (enum statement_enum): Move to top level.
 116         * ldmain.c: Add casts.
 117         * ldwrite.c: Add casts.
 118         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 119         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 120
 121 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 122
 123         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 124
 125 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 126
 127         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 128         (print_insn_s390): Signextend and shift pcrel operands before printing.
 129
 130 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 131
 132         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 133         VEX_LEN_AE_R_X_M_0 in comments.
 134
 135 2009-09-08  DJ Delorie  <dj@redhat.com>
 136
 137         * mep-opc.c: Regenerate.
 138
 139 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 140
 141         * z8kgen.c (struct op): Replace unused flavor with id.
 142         (opt): Remove extra xorb entry.
 143         (func): Use id field as fallback.
 144         (sub): Return new string, caller changed.
 145         (internal): Allocate end marker.  Assign unique id before sorting.
 146         (gas): Likewise.  Fix loop end condition.
 147         * z8k-opc.h: Regenerate.
 148
 149 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 150
 151         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 152
 153 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 154
 155         * z8kgen.c (func): Fix thinko last patch.
 156
 157 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 158
 159         * z8kgen.c (func): Stabilize qsort of identically named entries.
 160         * z8k-opc.h: Regenerate.
 161
 162 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 163
 164         * po/opcodes.pot: Regenerate.
 165
 166 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 167
 168         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 169         * configure: Regenerate.
 170         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 171         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 172         (i386-gen, ia64-gen, z8kgen): ..here.
 173         * Makefile.in: Regenerate.
 174
 175 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 176
 177         * z8k-opc.h: Regenerate.
 178
 179 2009-09-05  Martin Thuresson  <martin@mtme.org>
 180
 181         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 182         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 183         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 184         Rename argument class to symbol_class.
 185
 186 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 187
 188         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 189         to the new encoding of DBGA, DBGAH, and DBGAL.
 190         (_print_insn_bfin): Likewise.
 191
 192 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 193
 194         * bfin-dis.c (_print_insn_bfin): Don't declare.
 195         (print_insn_bfin): Don't declare.
 196         (dregs_pair): Remove.
 197         (ignore_bits): Remove.
 198         (ccstat): Remove.
 199
 200 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 201
 202         * bfin-dis.c (IS_DREG): Define.
 203         (IS_PREG): Define.
 204         (IS_AREG): Define.
 205         (IS_GENREG): Define.
 206         (IS_DAGREG): Define.
 207         (IS_SYSREG): Define.
 208         (decode_REGMV_0): Check illegal register move instructions.
 209
 210 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 211
 212         * Makefile.am (BUILD_LIBINTL): New variable.
 213         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 214         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 215         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 216         * Makefile.in: Regenerate.
 217
 218 2009-09-01  DJ Delorie  <dj@redhat.com>
 219
 220         * mep-asm.c: Regenerate.
 221         * mep-desc.c: Regenerate.
 222         * mep-opc.c: Regenerate.
 223
 224 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 225
 226         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 227         dependencies.  Remove unused FORMAT variable.
 228         * configure.com: New file to create build.com DCL script for
 229         Itanium VMS or Alpha VMS.
 230
 231 2009-08-29  Martin Thuresson  <martin@mtme.org>
 232
 233         * cris-dis.c (bytes_to_skip): Update code to use new name.
 234         * i386-dis.c (putop): Update code to use new name.
 235         * i386-gen.c (process_i386_opcodes): Update code to use
 236         new name.
 237         * i386-opc.h (struct template): Rename struct template to
 238         insn_template. Update code accordingly.
 239         * i386-tbl.h (i386_optab): Update type to use new name.
 240         * ia64-dis.c (print_insn_ia64): Rename variable template
 241         to template_val.
 242         * tic30-dis.c (struct instruction, get_tic30_instruction):
 243         Update code to use new name.
 244         * tic54x-dis.c (has_lkaddr, get_insn_size)
 245         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 246         Update code to use new name.
 247         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 248         Update type to new name.
 249         * z8kgen.c (internal, gas): Rename variable new to new_op.
 250
 251 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 252
 253         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 254         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 255         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 256         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 257         * Makefile.in: Regenerated.
 258
 259 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 260
 261         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 262         [INSTALL_LIBBFD]: ... here, ...
 263         [INSTALL_LIBBFD]: ... and empty overrides here.
 264         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 265         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 266         * Makefile.in: Regenerate.
 267         * configure: Regenerate.
 268
 269 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 270
 271         * m68k-dis.c (print_insn_arg): Add movecr register names for
 272         coldfire v4e families.
 273
 274 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 275
 276         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 277         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 278         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 279         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 280         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 281         (i386-gen.o): New rule.
 282         ($(srcdir)/i386-init.h): Adjust.
 283         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 284         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 285         (ia64-gen.o): New rule.
 286         (ia64_asmtab_deps): New variable.
 287         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 288         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 289         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 290         likewise.
 291         (s390-opc.tab): Adjust.
 292         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 293         rules.
 294         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 295         * Makefile.in: Regenerate.
 296         * z8kgen.c (gas): Avoid '/*' in comment.
 297         * z8k-opc.h (func): Regenerate.
 298
 299 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 300
 301         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 302         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 303         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 304         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 305         msp430-dis.c added.
 306         (LIBOPCODES_CFILES): New variable, adding to
 307         TARGET_LIBOPCODES_CFILES also non-target library sources.
 308         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 309         files.
 310         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 311         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 312         * Makefile.in: Regenerate.
 313         * po/POTFILES.in: Regenerate.
 314
 315 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 316
 317         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 318         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 319         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 320         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 321         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 322         is built shared even if it is not to be installed.
 323         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 324         (install_libopcodes, uninstall_libopcodes): Remove.
 325         (AM_CPPFLAGS): Renamed from ...
 326         (INCLUDES): ... this.
 327         * Makefile.in: Regenerate.
 328
 329         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 330         1.11, foreign, no-dist.
 331         (MKDEP, m32c_opc_h): Remove variables.
 332         (disassemble.lo): Rewrite using automake-style dependency
 333         tracking rules; only list the dependency upon the primary source
 334         file, but no included headers.
 335         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 336         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 337         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 338         ensure all dependency fragments are included in the Makefile.
 339         (s390-opc.lo): Depend on s390-opc.tab.
 340         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 341         (mkdep section): Remove.
 342         * Makefile.in: Regenerate.
 343         * po/POTFILES.in: Regenerate.
 344
 345         * Makefile.am (install-pdf, install-html): Remove.
 346         * Makefile.in: Regenerate.
 347
 348         * Makefile.in: Regenerate.
 349         * aclocal.m4: Likewise.
 350         * config.in: Likewise.
 351         * configure: Likewise.
 352
 353 2009-08-06  Michael Eager <eager@eagercon.com>
 354
 355         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 356         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 357         * Makefile.in: Regenerate.
 358         * configure.in: Add bfd_microblaze_arch target.
 359         * configure: Regenerate.
 360         * disassemble.c: Define ARCH_microblaze, return
 361         print_insn_microblaze().
 362         * microblaze-dis.c: New MicroBlaze disassembler.
 363         * microblaze-opc.h: New MicroBlaze opcode definitions.
 364         * microblaze-opcm.h: New MicroBlaze opcode types.
 365
 366 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 367
 368         * configure.in: Handle bfd_l1om_arch.
 369         * disassemble.c (disassembler): Likewise.
 370
 371         * configure: Regenerated.
 372
 373         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 374         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 375
 376         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 377         Add CPU_L1OM_FLAGS.
 378         (cpu_flags): Add CpuL1OM.
 379         (set_bitfield): Take an argument to set the value field.
 380         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 381         (process_i386_opcode_modifier): Updated.
 382         (process_i386_operand_type): Likewise.
 383         * i386-init.h: Regenerated.
 384         * i386-tbl.h: Likewise.
 385
 386         * i386-opc.h (CpuL1OM): New.
 387         (CpuXsave): Updated.
 388         (i386_cpu_flags): Add cpul1om.
 389
 390 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 391
 392         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 393         frstpm.
 394         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 395         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 396         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 397         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 398         Define.
 399         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 400         and cpufisttp.
 401         * i386-opc.tbl: Qualify floating point instructions by their
 402         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 403         and fsincos to be avilable only on 387. Fix fstsw ax to be
 404         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 405         and frstpm.
 406         * i386-init.h, i386-tbl.h: Regenerate.
 407
 408 2009-07-20  Nick Clifton  <nickc@redhat.com>
 409
 410         PR 10288
 411         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 412         offset or indexed based addressing mode 3.
 413
 414 2009-07-14  Nick Clifton  <nickc@redhat.com>
 415
 416         PR 10288
 417         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 418         patterns.
 419         (arm_decode_shift): Catch illegal register based shifts.
 420         (print_insn_arm): Properly handle negative register r0
 421         post-indexed addressing.
 422
 423 2009-07-10  Doug Kwan  <dougkwan@google.com>
 424
 425         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 426         lower 32 bits of long types to make hexadecimal output consistent
 427         on both 32-bit and 64-bit hosts.
 428
 429 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 430
 431         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 432         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 433         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 434         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 435         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 436         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 437         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 438         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 439         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 440         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 441         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 442         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 443
 444 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 445
 446         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 447
 448 2009-07-07  Nick Clifton  <nickc@redhat.com>
 449
 450         PR 10288
 451         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 452         addressing modes.
 453
 454 2009-07-06  DJ Delorie  <dj@redhat.com>
 455
 456         * mep-desc.c: Regenerate.
 457         * mep-desc.h: Regenerate.
 458         * mep-opc.c: Regenerate.
 459         * mep-opc.h: Regenerate.
 460
 461 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 462
 463         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 464         (i386_cpu_flags): New.
 465         * i386-gen.c: Add CPU_FMA4_FLAGS.
 466         * i386-opc.tbl: Add FMA4 instructions.
 467         * i386-tbl.h: Regenerate.
 468         * i386-init.h: Regenerate.
 469         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 470         (OP_XMM_VexW): Ditto.
 471         (OP_EX_VexW): Ditto.
 472         (VEXI4_Fixup): Ditto.
 473         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 474         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 475         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 476         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 477         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 478         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 479         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 480         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 481         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 482         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 483         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 484         (get_vex_imm8): New. handle FMA4.
 485         (OP_EX_VexReg): Ditto.
 486
 487 2009-06-30  Nick Clifton  <nickc@redhat.com>
 488
 489         PR 10288
 490         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 491         LFM and SFM instructions as comments,.
 492         Improve consistency of formatting for instructions displayed as
 493         comments and decimal values displayed with their hexadecimal
 494         equivalents.
 495         Formatting tidy ups.
 496
 497 2009-06-29  Nick Clifton  <nickc@redhat.com>
 498
 499         PR 10288
 500         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 501         boundary between variaant and generic coprocessor instuctions.
 502         (coprocessor): Use it.
 503         Fix architecture version of MCRR and MRRC instructions.
 504         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 505         (print_insn_coprocessor): Check architecture and extension masks.
 506         Print a hexadecimal version of any decimal constant that is
 507         outside of the range of -16 to +32.
 508         (print_arm_address): Add a return value of the offset used in the
 509         adress, if it is worth printing a hexadecimal version of it.
 510         (print_insn_neon): Print a hexadecimal version of any decimal
 511         constant that is outside of the range of -16 to +32.
 512         (print_insn_arm): Likewise.
 513         (print_insn_thumb16): Likewise.
 514         (print_insn_thumb32): Likewise.
 515
 516         PR 10297
 517         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 518         of an undefined instruction.
 519         (arm_opcodes): Use it.
 520         (thumb_opcod): Use it.
 521         (thumb32_opc): Use it.
 522
 523 2009-06-23  DJ Delorie  <dj@redhat.com>
 524
 525         * mep-desc.c: Regenerate.
 526         * mep-desc.h: Regenerate.
 527         * mep-dis.c: Regenerate.
 528         * mep-ibld.c: Regenerate.
 529         * mep-opc.c: Regenerate.
 530
 531         * mep-asm.c: Regenerate.
 532         * mep-opc.c: Regenerate.
 533         * mep-opc.h: Regenerate.
 534
 535 2009-06-22  Nick Clifton  <nickc@redhat.com>
 536
 537         * po/fi.po: Updated Finish translation.
 538
 539 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 540
 541         * m32c-asm.c: Regenerate.
 542
 543 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 544
 545         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 546         case label to proper lexical block.
 547         * score7-dis.c (print_insn_score32): Likewise.
 548
 549 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 550
 551         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 552         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 553         * s390-opc.txt (nopr, nop): Use new instruction format.
 554
 555 2009-06-18  Nick Clifton  <nickc@redhat.com>
 556
 557         PR 10288
 558         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 559         ARM architecture supports the matched instruction.
 560         (print_insn_arm): Likewise.
 561         (select_arm_features): New function.  Fills in the fields of an
 562         arm_feature_set structure based on a given arm machine number.
 563         (print_insn): Initialise an arm_feature_set structure.
 564
 565 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 566
 567         * vax-dis.c (is_function_entry): Return success for synthetic
 568         symbols too.
 569         (is_plt_tail): New function.
 570         (print_insn_vax): Decode PLT entry offset longword.
 571
 572 2009-06-15  Nick Clifton  <nickc@redhat.com>
 573
 574         PR 10186
 575         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 576         instruction.
 577
 578         PR 10173
 579         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 580
 581 2009-06-15  Nick Clifton  <nickc@redhat.com>
 582
 583         PR 10263
 584         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 585         the disassembly of data as well as instructions.
 586
 587 2009-06-11  Doug Evans  <dje@sebabeach.org>
 588
 589         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 590
 591 2009-06-11  Anthony Green  <green@moxielogic.com>
 592
 593         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 594         (moxie_form3_opc_info): Add branch instructions.
 595         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 596         encoded instructions.
 597
 598 2009-06-06  Anthony Green  <green@moxielogic.com>
 599
 600         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 601         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 602
 603 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 604
 605         * dep-in.sed: Don't use \n in replacement part of s command.
 606         * Makefile.am (DEP1): LC_ALL for uniq.
 607         * Makefile.in: Regenerate.
 608
 609 2009-06-02  Nick Clifton  <nickc@redhat.com>
 610
 611         * po/nl.po: Updated Dutch translation.
 612
 613 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 614
 615         * ia64-gen.c (parse_resource_users, print_dependency_table,
 616         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 617         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 618         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 619         insert_completer_entry, print_completer_entry, print_completer_table,
 620         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 621
 622 2009-05-28  DJ Delorie  <dj@redhat.com>
 623
 624         * mep-asm.c: Regenerate.
 625         * mep-desc.c: Regenerate.
 626
 627 2009-05-26  DJ Delorie  <dj@redhat.com>
 628
 629         * mep-asm.c: Regenerate.
 630         * mep-desc.c: Regenerate.
 631         * mep-desc.h: Regenerate.
 632         * mep-dis.c: Regenerate.
 633         * mep-ibld.c: Regenerate.
 634         * mep-opc.c: Regenerate.
 635         * mep-opc.h: Regenerate.
 636
 637 2009-05-26  Nick Clifton  <nickc@redhat.com>
 638
 639         * po/id.po: Updated Indonesian translation.
 640         * po/opcodes.pot: Updated template file.
 641
 642 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 643
 644         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 645         per line with all lines having continuation backslash.  Prefix
 646         first line with "A", following lines with "B".
 647         * Makefile.am (DEP): Don't use dep.sed here.
 648         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 649         dep.sed here on dependencies, sort and uniq.
 650         * Makefile.in: Regenerate.
 651
 652 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 653
 654         * makefile.vms (OPT): New variable.
 655         (CFLAGS): Update compilation flags.
 656
 657 2009-05-22  DJ Delorie  <dj@redhat.com>
 658
 659         * mep-asm.c: Regenerate.
 660         * mep-desc.c: Regenerate.
 661         * mep-desc.h: Regenerate.
 662         * mep-dis.c: Regenerate.
 663         * mep-ibld.c: Regenerate.
 664         * mep-opc.c: Regenerate.
 665         * mep-opc.h: Regenerate.
 666
 667 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 668
 669         * i386-opc.h (Cpusse5): Delete.
 670         (i386_cpu_flags): Delete.
 671         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 672         * i386-opc.tbl: Remove SSE5 instructions.
 673         * i386-tbl.h: Regenerate.
 674         * i386-init.h: Regenerate.
 675         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 676         (print_drex_arg): Delete.
 677         (OP_DREX4): Delete.
 678         (OP_DREX3): Delete.
 679         (OP_DREX_ICMP): Delete.
 680         (OP_DREX_FCMP): Delete.
 681         (DREX_*): Delete.
 682         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 683
 684 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 685
 686         * Makefile.am: Run "make dep-am".
 687         * Makefile.in: Regenerate.
 688         * po/POTFILES.in: Regenerate.
 689
 690 2009-05-19  DJ Delorie  <dj@redhat.com>
 691
 692         * mep-asm.c: Regenerate.
 693         * mep-opc.c: Regenerate.
 694
 695 2009-04-30  DJ Delorie  <dj@redhat.com>
 696
 697         * mep-asm.c: Regenerate.
 698         * mep-desc.c: Regenerate.
 699         * mep-desc.h: Regenerate.
 700         * mep-dis.c: Regenerate.
 701         * mep-ibld.c: Regenerate.
 702         * mep-opc.c: Regenerate.
 703         * mep-opc.h: Regenerate.
 704
 705 2009-04-17  DJ Delorie  <dj@redhat.com
 706
 707         * mep-desc.c: Regenerate.
 708         * mep-ibld.c: Regenerate.
 709         * mep-opc.c: Regenerate.
 710         * mep-opc.h: Regenerate.
 711
 712 2009-04-15  Anthony Green  <green@moxielogic.com>
 713
 714         * moxie-opc.c, moxie-dis.c: Created.
 715         * Makefile.am: Build the moxie source files.
 716         * configure.in: Add moxie support.
 717         * Makefile.in, configure: Rebuilt.
 718         * disassemble.c (disassembler): Add moxie support.
 719         (ARCH_moxie): Define.
 720
 721 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 722
 723         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 724         extension to None.
 725         (pshab, pshaw, pshad, pshaq): Likewise.
 726         * i386-tbl.h: Re-generate.
 727
 728 2009-04-08  DJ Delorie  <dj@redhat.com
 729
 730         * mep-asm.c: Regenerate.
 731         * mep-desc.c: Regenerate.
 732         * mep-desc.h: Regenerate.
 733         * mep-dis.c: Regenerate.
 734         * mep-ibld.c: Regenerate.
 735         * mep-opc.c: Regenerate.
 736         * mep-opc.h: Regenerate.
 737
 738 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 739
 740         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 741         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 742         Reorder entries so the extended mnemonics are listed before tlbilx.
 743
 744 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 745
 746         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 747         due to -many/-Many.
 748         (print_insn_powerpc): Make sure we only deprecate instructions using
 749         the original dialect and not a modified dialect due to -Many handling.
 750         Move the handling of the condition register and default operands to
 751         the end of the if/else if/else chain.
 752         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 753         instructions from newer processors are listed before older ones.
 754         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 755         that have instructions with conflicting opcodes.
 756
 757 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 758
 759         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 760         E500MC entries.
 761
 762 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 763
 764         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 765
 766 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 767
 768         * arm-dis.c (print_insn): Also check section matches in backwards
 769         search for mapping symbol.
 770
 771 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
 772
 773         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
 774
 775 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
 776
 777         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
 778         * Makefile.am: Run "make dep-am".
 779         * Makefile.in: Regenerate.
 780         * openrisc-opc.c: Regenerate.
 781
 782 2009-03-10  Nick Clifton  <nickc@redhat.com>
 783
 784         * po/id.po: Updated Indonesian translation.
 785
 786 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
 787
 788         * ppc-dis.c: Include "opintl.h".
 789         (struct ppc_mopt, ppc_opts): New.
 790         (ppc_parse_cpu): New function.
 791         (powerpc_init_dialect): Use it.
 792         (print_ppc_disassembler_options): Dump options from ppc_opts.
 793         Internationalize message.
 794
 795 2009-03-06  Nick Clifton  <nickc@redhat.com>
 796
 797         * po/es.po: Updated Spanish translation.
 798
 799 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
 800
 801         PR 6768
 802         * configure.in: Test for ld --as-needed support.  Link shared
 803         libopcodes against libm.
 804         * configure: Regenerate.
 805
 806 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
 807
 808         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 809         instructions from newer processors are listed before older ones.
 810
 811 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
 812
 813         * Makefile.am: Run "make dep-am".
 814         (HFILES): Move lm32-desc.h and lm32-opc.h from..
 815         (CFILES): ..here.
 816         * Makefile.in: Regenerate.
 817
 818 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
 819
 820         * score7-dis.c: New file.
 821         * Makefile.am: Add dependencies for score7-dis.c.
 822         * Makefile.in: Regenerate.
 823         * configure.in: Add score7-dis to score files.
 824         * configure: Regenerate.
 825         * score-dis.c: Add support for score7 architecture.
 826         * score-opc.h: Likewise.
 827
 828 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 829
 830         * configure: Regenerate.
 831
 832 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
 833
 834         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
 835
 836 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
 837
 838         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
 839         the power7 and the isel instructions.
 840         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
 841         (insert_dm, extract_dm): Likewise.
 842         (XB6): Update comment to include XX2 form.
 843         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
 844         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
 845         (RemoveXX3DM): Delete.
 846         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
 847         "mftgpr">: Deprecate for POWER7.
 848         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
 849         "frsqrte.">: Deprecate the three operand form and enable the two
 850         operand form for POWER7 and later.
 851         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
 852         <"waitsrv", "waitimpl">: Add extended opcodes.
 853         <"ldbrx", "stdbrx">: Enable for POWER7.
 854         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
 855         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
 856         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
 857         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
 858         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
 859         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
 860         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
 861         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
 862         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
 863         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
 864         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
 865         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
 866         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
 867         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
 868         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
 869         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
 870         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
 871         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
 872         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
 873         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
 874         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
 875         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
 876         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
 877         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
 878         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
 879         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
 880         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
 881         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
 882         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
 883         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
 884         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
 885         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
 886         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
 887         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
 888         "xxspltw", "xxswapd">: Add VSX opcodes.
 889
 890 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
 891
 892         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
 893         (operand_types): Remove Vex_Imm4.
 894
 895         * i386-opc.h (Vex_Imm4): Removed.
 896         (OTMax): Updated.
 897         (i386_operand_type): Remove vex_imm4.
 898
 899         * i386-opc.tbl: Remove Vex_Imm4 comments.
 900         * i386-init.h: Regenerated.
 901         * i386-tbl.h: Likewise.
 902
 903 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
 904
 905         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
 906         vq{r}shr{u}n.s64 insnstructions.
 907
 908 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
 909
 910         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
 911         operand to be a float point register (FRT/FRS).
 912
 913 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
 914
 915         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
 916         dmfc2 and dmtc2 before the architecture-level variants.
 917
 918 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
 919
 920         * fr30-opc.c: Regenerate.
 921         * frv-opc.c: Regenerate.
 922         * ip2k-opc.c: Regenerate.
 923         * iq2000-opc.c: Regenerate.
 924         * lm32-opc.c: Regenerate.
 925         * m32c-opc.c: Regenerate.
 926         * m32r-opc.c: Regenerate.
 927         * mep-opc.c: Regenerate.
 928         * mt-opc.c: Regenerate.
 929         * xc16x-opc.c: Regenerate.
 930         * xstormy16-opc.c: Regenerate.
 931         * tic54x-dis.c (print_instruction): Avoid compiler warning on
 932         sprintf call.
 933
 934 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
 935
 936         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
 937
 938 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
 939
 940         * ppc-opc.c: Update copyright year.
 941         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
 942         ordering for POWER4 and later and use the correct Server ordering.
 943
 944 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 945
 946         AVX Programming Reference (January, 2009)
 947         * i386-dis.c (PREFIX_VEX_3A44): New.
 948         (VEX_LEN_3A44_P_2): Likewise.
 949         (PREFIX_VEX_3A48): Updated.
 950         (VEX_LEN_3A4C_P_2): Likewise.
 951         (prefix_table): Add PREFIX_VEX_3A44.
 952         (vex_table): Likewise.
 953         (vex_len_table): Add VEX_LEN_3A44_P_2.
 954
 955         * i386-opc.tbl: Add PCLMUL + AVX instructions.
 956         * i386-tbl.h: Regenerated.
 957
 958 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
 959
 960         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
 961         (mips_arch_choices): Add XLR entry.
 962         * mips-opc.c (XLR): Define.
 963         (mips_builtin_opcodes): Add XLR instructions.
 964
 965 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
 966
 967         * Makefile.am: Add install-pdf target.
 968         * po/Make-in: Add install-pdf target.
 969         * Makefile.in: Regenerate.
 970
 971 2009-02-02  DJ Delorie  <dj@redhat.com>
 972
 973         * mep-asm.c: Regenerate.
 974         * mep-desc.c: Regenerate.
 975         * mep-desc.h: Regenerate.
 976         * mep-dis.c: Regenerate.
 977         * mep-ibld.c: Regenerate.
 978         * mep-opc.c: Regenerate.
 979         * mep-opc.h: Regenerate.
 980
 981 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
 982
 983         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
 984         qsub, and qdsub.
 985
 986 2009-01-28  Chao-ying Fu  <fu@mips.com>
 987
 988         * mips-opc.c (suxc1): Add the flag of FP_D.
 989
 990 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
 991
 992         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
 993         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
 994         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
 995         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
 996         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
 997         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
 998         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
 999         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1000
1001 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1002
1003         * configure.in (commonbfdlib): Delete.
1004         (SHARED_LIBADD): Add pic libiberty if such is available.
1005         * configure: Regenerate.
1006         * po/POTFILES.in: Regenerate.
1007
1008 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1009
1010         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1011         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1012         operand form and enable the four operand form for POWER6 and later.
1013         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1014         three operand form for POWER6 and later.
1015
1016 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1017
1018         * bfin-dis.c (OUTS): Use "%s" as format string.
1019
1020 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1021
1022         * i386-gen.c (cpu_flag_init): Remove a white space.
1023         (operand_type_init): Likewise.
1024
1025 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1026
1027         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1028         * i386-tbl.h: Regenerated.
1029
1030 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1031
1032         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1033         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1034         subS, xorS and cmpS.
1035
1036 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1037
1038         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1039         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1040         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1041         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1042         and CpuSYSCALL.
1043         (lineno): Removed.
1044         (set_bitfield): Take an argument, lineno.  Don't report lineno
1045         on error if it is -1.
1046         (process_i386_cpu_flag): Take an argument, lineno.
1047         (process_i386_opcode_modifier): Likewise.
1048         (process_i386_operand_type): Likewise.
1049         (output_i386_opcode): Likewise.
1050         (opcode_hash_entry): Add lineno.
1051         (process_i386_opcodes): Updated.
1052         (process_i386_registers): Likewise.
1053         (process_i386_initializers): Likewise.
1054
1055         * i386-opc.h (CpuP4): Removed.
1056         (CpuK6): Likewise.
1057         (CpuK8): Likewise.
1058         (CpuClflush): New.
1059         (CpuSYSCALL): Likewise.
1060         (CpuMMX): Updated.
1061         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1062         cpuclflush and cpusyscall.
1063
1064         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1065         syscall and sysret.
1066         * i386-init.h: Regenerated.
1067         * i386-tbl.h: Likewise.
1068
1069 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1070
1071         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1072         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1073         (cpu_flags): Add CpuRdtscp.
1074         (set_bitfield): Remove CpuSledgehammer check.
1075
1076         * i386-opc.h (CpuRdtscp): New.
1077         (CpuLM): Updated.
1078         (i386_cpu_flags): Add cpurdtscp.
1079
1080         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1081         * i386-init.h: Regenerated.
1082         * i386-tbl.h: Likewise.
1083
1084 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1085
1086         * ppc-opc.c (PPCNONE): Define.
1087         (NOPOWER4): Delete.
1088         (powerpc_opcodes): Initialize the new "deprecated" field.
1089
1090 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1091
1092         AVX Programming Reference (December, 2008)
1093         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1094         (VEX_LEN_E7_P_2_M_0): Likewise.
1095         (VEX_LEN_2C_P_1): Updated.
1096         (VEX_LEN_E8_P_2): Likewise.
1097         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1098         (mod_table): Likewise.
1099
1100         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1101         * i386-tbl.h: Regenerated.
1102
1103 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1104
1105         * i386-gen.c (process_copyright): Update for 2009.
1106
1107         * i386-init.h: Regenerated.
1108         * i386-tbl.h: Likewise.
1109
1110 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1111
1112         AVX Programming Reference (December, 2008)
1113         * i386-dis.c (OP_VEX_FMA): Removed.
1114         (OP_EX_VexW): Likewise.
1115         (OP_EX_VexImmW): Likewise.
1116         (OP_XMM_VexW): Likewise.
1117         (VEXI4_Fixup): Likewise.
1118         (VPERMIL2_Fixup): Likewise.
1119         (VexI4): Likewise.
1120         (VexFMA): Likewise.
1121         (Vex128FMA): Likewise.
1122         (EXVexW): Likewise.
1123         (EXdVexW): Likewise.
1124         (EXqVexW): Likewise.
1125         (EXVexImmW): Likewise.
1126         (XMVexW): Likewise.
1127         (VPERMIL2): Likewise.
1128         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1129         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1130         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1131         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1132         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1133         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1134         (get_vex_imm8): Likewise.
1135         (OP_EX_VexReg): Likewise.
1136         vpermil2_op): Likewise.
1137         (EXVexWdq): New.
1138         (vex_w_dq_mode): Likewise.
1139         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1140         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1141         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1142         (es_reg): Updated.
1143         (PREFIX_VEX_38DB): Likewise.
1144         (PREFIX_VEX_3A4A): Likewise.
1145         (PREFIX_VEX_3A60): Likewise.
1146         (PREFIX_VEX_3ADF): Likewise.
1147         (VEX_LEN_3ADF_P_2): Likewise.
1148         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1149         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1150         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1151         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1152         PREFIX_VEX_3896...PREFIX_VEX_389F,
1153         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1154         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1155         (vex_table): Likewise.
1156         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1157         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1158         (putop): Support "%XW".
1159         (intel_operand_size): Handle vex_w_dq_mode.
1160
1161         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1162
1163         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1164         instructions.  Add new FMA instructions.
1165         * i386-tbl.h: Regenerated.
1166
1167 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1168
1169         * or32-opc.c (or32_print_register, or32_print_immediate,
1170         disassemble_insn): Don't rely on undefined sprintf behaviour.
1171
1172 For older changes see ChangeLog-2008
1173 \f
1174 Local Variables:
1175 mode: change-log
1176 left-margin: 8
1177 fill-column: 74
1178 version-control: never
1179 End: