opcodes/ChangeLog

   1 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
   2
   3         * mips-opc.c (sync.p,sync.l): Swap insn values.
   4
   5 start-sanitize-fr30
   6 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
   7
   8         * fr30-opc.c: Regenerate.
   9
  10 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
  11
  12         * fr30-opc.c: Regenerated.
  13         * fr30-opc.h: Regenerated.
  14
  15 end-sanitize-fr30
  16 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
  17
  18         * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
  19         (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
  20         to hold value.
  21         (insert_insn_normal): Fix typo.
  22         * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
  23         * cgen-dis.in (extract_normal): Ditto.  New arg `pc'.
  24         Rewrite ! CGEN_INT_INSN_P case.
  25         (extract_insn_normal): Ditto.
  26         (extract_1): New arg `pc'.  All callers updated.
  27         Replace calls to bfd_getb8.
  28         (fill_cache): New fn.
  29         * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
  30         * cgen-opc.in: ... from here.
  31         (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
  32         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
  33 start-sanitize-fr30
  34         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
  35 end-sanitize-fr30
  36
  37 start-sanitize-fr30
  38 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
  39
  40         * fr30-opc.c: Regenerated.
  41
  42 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
  43
  44         * fr30-opc.c: Regenerated.
  45         * fr30-opc.h: Regenerated.
  46         * fr30-dis.c: Regenerated.
  47         * fr30-asm.c: Regenerated.
  48
  49 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
  50
  51         * po/opcodes.pot: Regenerated.
  52         * fr30-opc.c: Regenerated.
  53         * fr30-opc.h: Regenerated.
  54         * fr30-dis.c: Regenerated.
  55         * fr30-asm.c: Regenerated.
  56
  57 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
  58
  59         * disassemble.c (disassembler): Add support for FR30 target.
  60
  61 end-sanitize-fr30
  62 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
  63
  64 start-sanitize-cygnus
  65         * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
  66         CGEN_OPERAND_SEM_ONLY.
  67 end-sanitize-cygnus
  68         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
  69 start-sanitize-fr30
  70         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
  71
  72 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
  73
  74         * po/opcodes.pot: Regenerate.
  75         * po/POTFILES.in: Regenerate.
  76         * fr30-opc.c: Regenerate.
  77         * fr30-opc.h: Regenerate.
  78 end-sanitize-fr30
  79 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
  80
  81         * m32r-asm.c: Regenerate.
  82
  83 start-sanitize-fr30
  84 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
  85
  86         * configure.in: Added case for bfd_fr30_arch.
  87         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
  88         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
  89         (CLEANFILES): Added stamp-fr30.
  90         (FR30_DEPS): Added.
  91         * fr30-asm.c: New file.
  92         * fr30-dis.c: New file.
  93         * fr30-opc.c: New file.
  94         * fr30-opc.h: New file.
  95         * po/POTFILES.in: Regenerated
  96         * po/opcodes.pot: Regenerated
  97
  98 end-sanitize-fr30
  99 start-sanitize-m32rx
 100 Mon Nov  2 20:08:03 1998  Doug Evans  <devans@canuck.cygnus.com>
 101
 102         * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
 103         to bcl8,bncl8 entries.
 104         (macro_insn_table_entries): Add FILL_SLOT attribute
 105         to bcl8r,bncl8r entries.
 106
 107 end-sanitize-m32rx
 108 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
 109
 110         * configure.in: detect cygwin* instead of cygwin32*
 111         * configure: regenerate
 112
 113 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
 114
 115         * mips-opc.c (IS_M): Added.
 116
 117 start-sanitize-r5900
 118 Fri Oct 23 12:06:00 EDT 1998  Frank Ch. Eigler <fche@cygnus.com>
 119
 120         * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
 121         and masks.
 122
 123 end-sanitize-r5900
 124 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
 125
 126 start-sanitize-cygnus
 127         * cgen-asm.in (insert_1): New function.
 128         (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
 129         (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
 130         (@arch@_cgen_assemble_insn): Update type of `buf' arg.
 131         * cgen-dis.in (extract_1): New function.
 132         (extract_normal): buf_ctrl renamed to ex_info, update type.
 133         Progress on handling of CGEN_INT_INSN_P.
 134         (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
 135         Update handling of CGEN_INT_INSN_P.  Handle errors from
 136         @arch@_cgen_extract_operand.
 137         (print_insn): Renamed from print_int_insn.  Handle ! CGEN_INT_INSN_P.
 138         (default_print_insn): Renamed from print_insn.
 139         Handle ! CGEN_INT_INSN_P.
 140         (print_insn_@arch@): Handle error returns from print_insn.
 141         * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
 142         (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
 143         (@arch@_cgen_lookup_get_insn_operands): Ditto.
 144 end-sanitize-cygnus
 145         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
 146
 147 start-sanitize-am33
 148 Wed Oct 14 12:12:25 1998  Jeffrey A Law  (law@cygnus.com)
 149
 150         * m10300-opc.c: Allow autoincrement stores using the same register
 151         for source and destination operands.
 152
 153 Mon Oct 12 10:43:51 1998  Jeffrey A Law  (law@cygnus.com)
 154
 155         * m10300-opc.c: DSP instrutions which only write to one general
 156         register have no restrictions on matching operands.
 157
 158         * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
 159
 160 end-sanitize-am33
 161 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
 162
 163         * m32r-opc.h,m32r-opc.c: Regenerate.
 164
 165 start-sanitize-am33
 166 Thu Oct  8 06:04:38 1998  Jeffrey A Law  (law@cygnus.com)
 167
 168         * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
 169
 170 end-sanitize-am33
 171 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 172
 173         * i386-dis.c (OP_3DNowSuffix): New static function.
 174         (OPSUF): Define.
 175         (GRP14): Define.
 176         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
 177         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
 178         (insn_codep): New static variable.
 179         (print_insn_x86): Init insn_codep after prefixes.
 180         (grps): Add GRP14 entries for prefetch, prefetchw.
 181         (OP_REG): Reformat.
 182
 183         From Jeff B Epler <jepler@usgs.gov>
 184         * i386-dis.c (Suffix3DNow): New table.
 185
 186 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
 187
 188         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
 189
 190 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
 191
 192         * d10v-dis.c (print_operand): If num is nonzero, then
 193         add OPERAND_ACC1, not OPERAND_ACC0.
 194
 195 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
 196
 197         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
 198         insns.
 199
 200 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
 201
 202         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
 203         class.
 204
 205 start-sanitize-sky
 206 Fri Sep 18 16:23:32 1998  Doug Evans  <devans@canuck.cygnus.com>
 207
 208         * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
 209
 210 end-sanitize-sky
 211 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
 212
 213         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
 214
 215 start-sanitize-nortel-ppc750
 216 1998-09-09  Michael Meissner  <meissner@cygnus.com>
 217
 218         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
 219         to/from SPRs.
 220
 221 end-sanitize-nortel-ppc750
 222 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
 223
 224         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
 225         object files.
 226         (print_insn_little_arm): Detect Thumb symbols in elf object
 227         files.
 228
 229 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
 230
 231         * alpha-dis.c (print_insn_alpha): Use the machine type to
 232         decide which PALcode set to include.
 233
 234 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
 235
 236         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
 237
 238 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
 239
 240         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
 241         MSUB and MSUBS instructions.
 242
 243 start-sanitize-r5900
 244 Tue Aug 18 16:48:52 1998  Ian Lance Taylor  <ian@cygnus.com>
 245
 246         * mips-opc.c: Insert contents of vu0.h, rather than including it.
 247         * vu0.h: Remove.
 248         * Makefile.am: Rebuild dependencies.
 249         * Makefile: Rebuild.
 250
 251 end-sanitize-r5900
 252 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
 253
 254         * ppc-opc.c (powerpc_operands): Omit parens around additions in
 255         operand name macros.
 256
 257 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
 258
 259 start-sanitize-coldfire
 260         * m68k-opc.c: Correct divsl, divul, remsl, and remul for
 261         ColdFire, as below for mulsl and mulul.
 262
 263 end-sanitize-coldfire
 264         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
 265         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
 266         +, -, and d for ColdFire.
 267
 268         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
 269         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
 270         (extract_mbe): Likewise.
 271
 272 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
 273
 274         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
 275
 276         * m10300-opc.c: First cut at UDF instructions.
 277
 278 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
 279
 280         * m32r-opc.c: Regenerate (remove semantic descriptions).
 281
 282 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
 283
 284         * arm-dis.c (print_insn_big_arm):  Fix indentation.
 285         (print_insn_little_arm): Likewise.
 286
 287 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
 288
 289         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
 290         attributes.
 291         (print_insn_little_arm): Likewise.
 292
 293 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
 294
 295         Move all global state data into opcode table struct, and treat
 296         opcode table as something that is "opened/closed".
 297         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
 298         (cgen_asm_init): Delete.
 299         (cgen_set_parse_operand_fn): New function.
 300         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
 301         (cgen_dis_init): Delete.
 302         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
 303         (cgen_current_{opcode_table_mach,endian}): Delete.
 304 start-sanitize-cygnus
 305         * cgen-asm.in (all fns): New first arg of opcode table descriptor.
 306         * cgen-dis.in (all fns): Ditto.
 307         * cgen-opc.in (all fns): Ditto.
 308 end-sanitize-cygnus
 309         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 310
 311 start-sanitize-cygnus
 312         * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
 313
 314         * cgen-dis.in (print_normal): Split into two.
 315         (print_address): New function.
 316         (extract_insn_normal): Clarify insn_value arg.
 317         (print_int_insn): Renamed from print_insn.
 318         (print_insn): New arg.
 319         (print_insn_@arch@): Open opcode table if not already done so.
 320         Move reading of insn into print_insn.
 321
 322 end-sanitize-cygnus
 323 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
 324
 325         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
 326         instructions.
 327
 328 start-sanitize-m32rx
 329 Tue Jul 28 13:15:39 1998  Doug Evans  <devans@canuck.cygnus.com>
 330
 331         Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
 332         accept an accumulator choice.
 333         * m32r-opc.c,m32r-opc.h: Regenerate.
 334
 335 end-sanitize-m32rx
 336 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
 337
 338         * m10300-opc.c: Add entries for "no_match_operands" field in
 339         the opcode table.
 340
 341 start-sanitize-am33
 342 Fri Jul 24 15:22:40 1998  Jeffrey A Law  (law@cygnus.com)
 343
 344         * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
 345         operand.
 346
 347 end-sanitize-am33
 348 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 349
 350         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
 351
 352 start-sanitize-am33
 353 Thu Jul 23 09:21:03 1998  Jeffrey A Law  (law@cygnus.com)
 354
 355         * m10300-opc.c: Add DSP autoincrement memory loads/stores.
 356
 357         * m10300-opc.c: Add autoincrement memory loads/stores.
 358
 359 end-sanitize-am33
 360 start-sanitize-r5900
 361 Wed Jul 22 17:05:40 1998  Jeffrey A Law  (law@cygnus.com)
 362
 363         * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
 364         phmsubh respectively.
 365
 366 end-sanitize-r5900
 367 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
 368
 369 start-sanitize-cygnus
 370         * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
 371         CGEN_EXTRACT_FN.
 372         (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
 373         @arch_cgen_get_int_operand.
 374         * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
 375         Update call to @arch@_cgen_insert_operand.
 376         (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
 377         * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
 378         (extract_insn_normal): New arg `pc', callers updated.
 379         Update call to @arch@_cgen_extract_operand.
 380         (print_insn): Update call to CGEN_EXTRACT_FN.
 381 end-sanitize-cygnus
 382         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 383
 384 start-sanitize-am33
 385 Mon Jul 20 12:10:37 1998  Jeffrey A Law  (law@cygnus.com)
 386
 387         * m10300-opc.c: Fix load to sp and store from sp for the am33.
 388         Add more multimedia instructions.
 389
 390 Thu Jul 16 18:04:46 1998  Jeffrey A Law  (law@cygnus.com)
 391
 392         * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
 393         "mulu".
 394
 395 end-sanitize-am33
 396 start-sanitize-r5900
 397 Mon Jul 13 18:14:24 1998  Jeffrey A Law  (law@cygnus.com)
 398
 399         * mips-opc.c (pref): Enabled for the r5900.
 400
 401 end-sanitize-r5900
 402 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 403
 404         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
 405         the first prefix.
 406         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
 407         than `fnstsw %eax'.
 408         (OP_J): Remove unnecessary subtraction when 16-bit displacement
 409         will be masked later.
 410
 411 start-sanitize-am33
 412 Fri Jul 10 23:09:56 1998  Jeffrey A Law  (law@cygnus.com)
 413
 414         * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
 415         instructions.
 416
 417 Wed Jul  8 11:32:44 1998  Jeffrey A Law  (law@cygnus.com)
 418
 419         * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
 420         from raw register #s to symbolic names to make debugging easier.
 421
 422 end-sanitize-am33
 423 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
 424
 425         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
 426
 427 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
 428
 429         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 430 start-sanitize-cygnus
 431         * Makefile.am (CGENDIR): Set via configure.
 432         (CGEN): New variable.
 433         (CGENFILES): object.scm renamed to cos.scm.
 434         (run-cgen): Renamed from cgen.  stamp file renamed to stamp-$prefix.
 435         (stamp-m32r): Pass prefix to run-cgen.
 436         * Makefile.in: Regenerate.
 437         * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
 438         * cgen-dis.in: Ditto.
 439         * cgen-opc.in: Ditto.
 440         * cgen.sh: New args cgen,prefix.  Delete args scheme,schemeflags.
 441         * configure.in: AC_SUBST cgen,cgendir.  No longer look for guile.
 442         * configure: Regenerate.
 443 end-sanitize-cygnus
 444
 445 start-sanitize-am33
 446 Tue Jun 30 09:59:37 1998  Jeffrey A Law  (law@cygnus.com)
 447
 448         * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
 449
 450 Mon Jun 29 14:54:32 1998  Jeffrey A Law  (law@cygnus.com)
 451
 452         * m10300-opc.c: Reorder more instructions so that we do not
 453         accidentally match a mn10300 instruction when we really
 454         wanted an am33 instruction.
 455
 456 end-sanitize-am33
 457 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
 458
 459         * m10300-dis.c: Only recognize instructions from the currently
 460         selected machine.
 461         * m10300-opc.c: Add field indicating the particular variant of
 462         the mn10300 each instruction is available on.
 463
 464 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
 465
 466         * configure.in: For bfd_vax_arch, build vax-dis.lo.
 467         * Makefile.am: Rebuild dependencies.
 468         (CFILES): Add vax-dis.c.
 469         (ALL_MACHINES): Add vax-dis.lo.
 470         * aclocal.m4: Rebuild with current libtool.
 471         * configure, Makefile.in: Rebuild.
 472
 473 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
 474
 475         * vax-dis.c: New file, from work by Pauline Middelink
 476         <middelin@polyware.iaf.nl>.
 477         * disassemble.c (ARCH_vax): Define if ARCH_all.
 478         (disassembler): Add case for ARCH_vax.
 479         * makefile.vms: Support compilation on vms/vax.
 480
 481 start-sanitize-sky
 482 Wed Jun 24 17:14:01 1998  Ian Carmichael  <iancarm@cygnus.com>
 483
 484         * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
 485         the DVP_OPERAND_RELOC_11_S4 relocation.
 486
 487 end-sanitize-sky
 488 start-sanitize-am33
 489 Wed Jun 24 09:53:06 1998  Jeffrey A Law  (law@cygnus.com)
 490
 491         * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
 492         4 byte instructions.
 493         (disassemble): Correctly handle FMT_D10 instructions.
 494
 495         * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
 496         am33 shift instructions.
 497
 498         * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
 499         3 byte instructions.
 500         (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
 501         FMT_D9 and FMT_D10.  Handle various new opcode flags for the am33.
 502
 503         * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
 504         (mn10300_opcodes): Reorder so as to try and select opcodes from
 505         the core chip when multiple alternatives exist.  Change several
 506         am33 instructions to use IMM32_HIGH8_MEM.  Fix typos in "mac" and
 507         "macbu" instructions.  Fix typos in a couple DSP instructions too.
 508
 509 end-sanitize-am33
 510 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
 511
 512         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
 513         related to sign extension and the size of ints.
 514
 515 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
 516
 517         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
 518         instructions.  Support (sp) addressing mode by expanding it into
 519         (0,sp).
 520
 521 start-sanitize-sky
 522 Mon Jun 22 15:48:29 1998  Ian Carmichael  <iancarm@cygnus.com>
 523
 524         * dvp-opc.c (LIMM11, LUIMM15): New symbol types
 525         DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
 526         be used as immediate values.
 527
 528 end-sanitize-sky
 529 start-sanitize-am33
 530 Mon Jun 22 13:36:27 1998  Jeffrey A Law  (law@cygnus.com)
 531
 532         * m10300-opc.c: Support 4 byte DSP instructions.
 533
 534 end-sanitize-am33
 535 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
 536
 537         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
 538
 539 start-sanitize-am33
 540 Fri Jun 19 16:47:06 1998  Jeffrey A Law  (law@cygnus.com)
 541
 542         * m10300-opc.c: Support 6 and 7 byte am33 instructions.
 543
 544 end-sanitize-am33
 545 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
 546
 547         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
 548
 549 start-sanitize-am33
 550 Fri Jun 19 09:42:51 1998  Jeffrey A Law  (law@cygnus.com)
 551
 552         * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
 553         found on the mn10300.
 554
 555 end-sanitize-am33
 556 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
 557
 558         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
 559         sysexit.
 560
 561 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
 562
 563         * mips-dis.c (print_insn_little_mips): Previously, instruction
 564         printing references the symbol table to determine whether the
 565         instruction resides in a block regular instructions or mips16
 566         instructions. However, when the disassembler gets used in other
 567         environments where the symbol table is not present, we no longer
 568         rely in the symbol table, rather, use the low bit of the
 569         instructions address to guess. There should be no change for usage
 570         of the disassembler in host based programse, gdb ,objdump.
 571         (print_insn_big_mips): ditto.
 572         (print_insn_mips): ditto
 573
 574 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
 575
 576         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
 577
 578 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
 579
 580 start-sanitize-am33
 581         * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
 582         operands for the am33.
 583         (mn10300_opcodes): Add new instructions from the am33.
 584 end-sanitize-am33
 585         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
 586
 587 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 588
 589         * i386-dis.c (index16): Add '%' to register names.  Use ','
 590         instead of '+'.
 591
 592 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 593
 594         * i386-dis.c: Don't print opcode suffix when we can figure out the
 595         size (and gas can!) by register operands, or from the default
 596         size.
 597         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
 598         macro to 'E'.
 599         (dis386, dis386_twobyte, grps): Use new suffix macros.
 600         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
 601         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
 602         order of cmps operands to agree with Intel docs.  Correct operand
 603         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
 604         agree with Intel docs.
 605         (print_insn_x86): Print orphan fwait before other prefixes.
 606         Return correct byte count for orphan fwait with prefixes.  Don't
 607         print `bound' operands in reverse order.
 608         (ckprefix): Stop accumulating prefixes if we get fwait.
 609         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
 610
 611 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
 612
 613         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
 614         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
 615
 616 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 617
 618         Fix problems when bfd_vma is wider than long.
 619         * i386-dis.c: Make op_address and start_pc unsigned.
 620         (set_op): Make parameter unsigned.
 621         (print_insn_x86): Cast to bfd_vma when passing a value to
 622         print_address_func.
 623         * ns32k-dis.c (CORE_ADDR): Don't define.
 624         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
 625         bfd_scan_vma to read back address.
 626         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
 627         to format it.
 628         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
 629         (NEXTULONG): New definition.
 630         (print_insn_m68k): Avoid overflow when computing third argument of
 631         print_insn_arg.
 632         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
 633         Use disp instead of val to store offset values.
 634         (print_indexed): Use base_disp instead of word to store base
 635         displacement, to avoid overflow.
 636         * m10300-dis.c (disassemble): Cast value to long when computing
 637         pc-relative address, to get correct sign extension.
 638
 639 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 640
 641         * m32r-opc.c: Regenerate.
 642
 643 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
 644
 645         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
 646         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
 647
 648 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
 649
 650         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
 651
 652 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 653
 654         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
 655         functions to void.
 656         (OP_DSreg): Rename from OP_DSSI.
 657         (OP_ESreg): Rename from OP_ESDI.
 658         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
 659         (DSBX): Define.
 660         (append_seg): Rename from append_prefix.
 661         (ptr_reg): New function.
 662         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
 663         Add DSBX for xlat.
 664         (PREFIX_ADDR): Rename from PREFIX_ADR.
 665         (float_reg): Add non-broken opcodes for people who don't want
 666         UNIXWARE_COMPAT.
 667
 668 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 669
 670         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
 671         68000/68008/68010.
 672
 673 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
 674
 675         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
 676
 677 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
 678
 679         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
 680         0; produce error message for shifts of size 32 (or 64 for 64-bit
 681         shifts), because the hardware doesn't support them.
 682
 683 start-sanitize-r5900
 684 Mon Jun  1 10:27:26 1998  Jeffrey A Law  (law@cygnus.com)
 685
 686         * mips-opc.c (c.lt.s): Remove r5900 specific variant.
 687         (c.le.s): Likewise.
 688
 689         * vu0.h (sqc2): Fix opcode.
 690
 691         * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
 692         (sqrt.s): Likewise.
 693
 694 end-sanitize-r5900
 695 start-sanitize-cygnus
 696 Thu May 28 08:46:09 1998  Catherine Moore <clm@cygnus.com>
 697
 698        * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
 699        Change pinfo to use WR_HILO.
 700
 701 end-sanitize-cygnus
 702 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
 703
 704         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
 705         LONG_2, LONG_2b formats to use this new operand.
 706
 707 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
 708
 709         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
 710
 711 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
 712
 713         * sparc-dis.c (print_insn_sparc): big endian instruction / little
 714         endian data support.
 715
 716 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
 717
 718         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
 719         and SHORT_B3b formats to use Rb instead of Ra.
 720
 721         Add FLAG_MUL16 to MUL2XH opcode.
 722
 723         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
 724         to existing 1.1.1 parallelisation prohibition procedure.
 725
 726 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
 727
 728         * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
 729         * cgen-dis.in (extract_normal): Likewise.
 730         * m32r-asm.c,m32r-dis.c: Regenerate.
 731
 732 start-sanitize-sky
 733 Fri May 22 11:44:10 1998  Doug Evans  <devans@canuck.cygnus.com>
 734
 735         * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
 736
 737 end-sanitize-sky
 738 start-sanitize-r5900
 739 Wed May 20 00:22:27 1998  Jeffrey A Law  (law@cygnus.com)
 740
 741         * mips-opc.c (multu1): Add two operand variant for the r5900.
 742
 743 end-sanitize-r5900
 744 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
 745
 746         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
 747         with a shift count of 0.
 748
 749 start-sanitize-r5900
 750 Mon May 18 14:27:06 1998  Frank Ch. Eigler  <fche@cygnus.com>
 751
 752         * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
 753
 754 Mon May 18 11:44:00 1998  Jeffrey A Law  (law@cygnus.com)
 755
 756         * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
 757         (_print_insn_mips): Likewise.
 758         * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
 759         completers.
 760
 761 end-sanitize-r5900
 762 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
 763
 764         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
 765         (cgen_hw_lookup_by_num): New function.
 766
 767 start-sanitize-m32rx
 768         * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
 769
 770 end-sanitize-m32rx
 771 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 772
 773         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
 774
 775 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
 776
 777         * sparc-dis.c (print_insn_sparc): Always fetch instructions
 778         as big-endian on SPARClite.
 779
 780 start-sanitize-m32rx
 781 Tue May 12 13:39:51 1998  Nick Clifton  <nickc@cygnus.com>
 782
 783         * m32r-opc.c: Regenerated - SPECIAL attribute added to some
 784         insns.
 785         * m32r-opc.h: Regenerated - SPECIAL attribute added to some
 786         insns.
 787
 788 end-sanitize-m32rx
 789 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
 790
 791         * d30v-opc.c (pre_defined_register): Remove alias for r0.
 792
 793 start-sanitize-r5900
 794 Mon May 11 13:12:15 1998  Frank Ch. Eigler  <fche@cygnus.com>
 795
 796         * mips-opc.c (break): Added 20-bit single-operand break
 797         instruction for R5900 only.
 798
 799 end-sanitize-r5900
 800 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
 801
 802         * po/Make-in (install-info): New target.
 803
 804 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
 805
 806         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
 807         * configure: Rebuild.
 808
 809 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
 810
 811         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
 812         variety of ISA2 instructions to set bottom ten bits of trap code.
 813
 814 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
 815
 816         * Makefile.am (config.status): Add explicit target so that
 817         config.status depends upon bfd/configure.in.
 818         * Makefile.in: Rebuild.
 819
 820 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
 821
 822         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
 823         instructions to set bottom ten bits of break code.
 824         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
 825         for above optional argument.
 826
 827 start-sanitize-cygnus
 828 Wed May  6 14:47:17 1998  Doug Evans  <devans@seba.cygnus.com>
 829
 830         * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
 831         * m32r-opc.h: Regenerate.
 832
 833 end-sanitize-cygnus
 834 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
 835
 836         * makefile.vms: Run dec c with /nodebug.
 837
 838 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
 839
 840         * Makefile.in: Rebuilt.
 841         * Makefile.am: Regenerated dependencies with mkdep.
 842
 843         * opintl.h (_): Define as dgettext.
 844
 845 start-sanitize-cygnus
 846 Fri May  1 13:47:42 1998  Doug Evans  <devans@canuck.cygnus.com>
 847
 848         * configure.in: Add support for --enable-cgen-maint.
 849         * Makefile.am (M32R_DEPS): New variable.
 850         (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
 851         * aclocal.m4: Regenerate.
 852         * Makefile.in: Regenerate.
 853         * configure: Regenerate.
 854
 855         * Makefile.am (CGENFILES): Add minsn.scm.
 856
 857 end-sanitize-cygnus
 858 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
 859
 860         * cgen-asm.c: Internationalised.
 861 start-sanitize-cygnus
 862         * cgen-asm.in: Internationalised.
 863         * cgen-opc.in: Internationalised.
 864 end-sanitize-cygnus
 865         * m32r-asm.c: Internationalised.
 866         * m32r-dis.c: Internationalised.
 867         * m32r-opc.c: Internationalised.
 868
 869         * aclocal.m4: Regenerated.
 870         * configure: Regenerated.
 871         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
 872         * Makefile.in: Rebuild.
 873         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
 874         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
 875
 876 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
 877
 878         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
 879         after AC_PROG_CC.
 880         * aclocal.m4, configure: Rebuild with current tools.
 881
 882 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
 883
 884         * opintl.h: New file - contains internationalisation macros used
 885         by source files in this directory.
 886         * po/: New subdirectory - contains internationalisation files.
 887         * po/Make-in: New file - Makefile constructor.
 888         * po/POTFILES.in: New file - list of files in opcodes directory
 889         that should be scan for internationalisation macros.
 890         * po/opcodes.pot: New file - list of internationisation strings
 891         found in files mentioned in po/POTFILES.in.
 892         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
 893         entry.  Add intl directory to include paths.
 894         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
 895         HAVE_STRCPY, HAVE_LC_MESSAGES
 896         * configure.in: Add rule to build Makefile in po subdirectory.
 897         * Makefile.in: Rebuilt.
 898         * aclocal.m4: Rebuilt.
 899         * config.in: Rebuilt.
 900         * configure: Rebuilt.
 901         * alpha-opc.c: Internationalised.
 902         * arc-dis.c: Internationalised.
 903         * arc-opc.c: Internationalised.
 904         * arm-dis.c: Internationalised.
 905         * cgen-asm.c: Internationalised.
 906         * d30v-dis.c: Internationalised.
 907         * dis-buf.c: Internationalised.
 908 start-sanitize-sky
 909         * dvp-dis.c: Internationalised.
 910         * dvp-opc.c: Internationalised.
 911 end-sanitize-sky
 912         * h8300-dis.c: Internationalised.
 913         * h8500-dis.c: Internationalised.
 914         * i386-dis.c: Internationalised.
 915         * m10200-dis.c: Internationalised.
 916         * m10300-dis.c: Internationalised.
 917         * m68k-dis.c: Internationalised.
 918         * m88k-dis.c: Internationalised.
 919         * mips-dis.c: Internationalised.
 920         * ns32k-dis.c: Internationalised.
 921         * opintl.h: Internationalised.
 922         * ppc-opc.c: Internationalised.
 923         * sparc-dis.c: Internationalised.
 924         * v850-dis.c: Internationalised.
 925         * v850-opc.c: Internationalised.
 926
 927 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
 928
 929         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
 930         (asm_hash_table_entries): New variable.
 931         (cgen_asm_init): Free asm_hash_table_entries.
 932         (hash_insn_array,hash_insn_list): New functions.
 933         (build_asm_hash_table): Use them.  Hash macro insns as well.
 934         (cgen_asm_lookup_insn): Update.
 935         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
 936         (dis_hash_table_entries): New variable.
 937         (cgen_dis_init): Free dis_hash_table_entries.
 938         (hash_insn_array,hash_insn_list): New functions.
 939         (build_dis_hash_table): Use them.  Hash macro insns as well.
 940         (cgen_dis_lookup_insn): Update.
 941         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
 942         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
 943         (cgen_macro_insn_count): New function.
 944         * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
 945         All callers updated.  Sanity check result of extract fn.
 946         (@arch@_cgen_get_insn_operands): Change result type to void.
 947         Delete args insn_value, length.  New arg fields.  All callers updated.
 948         (@arch@_cgen_lookup_get_insn_operands): New function.
 949         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 950
 951 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 952
 953         * i386-dis.c (OP_DSSI): Print segment override.
 954
 955 start-sanitize-r5900
 956 Thu Apr 23 12:32:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
 957
 958         * mips-opc.c (msub.s): Correct mask pattern for disassembly.
 959
 960 end-sanitize-r5900
 961 start-sanitize-r5900
 962 Mon Apr 20 19:11:55 1998  Frank Ch. Eigler  <fche@cygnus.com>
 963
 964         * mips-opc.c (madd.s): Correct mask pattern for disassembly.
 965
 966 end-sanitize-r5900
 967 start-sanitize-r5900
 968 Sat Apr 18 00:29:18 1998  Jeffrey A Law  (law@cygnus.com)
 969
 970         * vu0.h (vlqd, vlqi): Update per revised specs.
 971
 972 end-sanitize-r5900
 973 start-sanitize-sky
 974 Thu Apr 16 11:44:59 1998  Doug Evans  <devans@canuck.cygnus.com>
 975
 976         * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
 977         (vif_operands): Update.
 978         (vif_get_unpackloc): Delete.
 979         (state_vif_unpackloc{,_star_p}): Delete.
 980         (dvp_opcode_init_parse): Update.
 981         (vif_unpack_len_value): Avoid divide by zero.
 982
 983 end-sanitize-sky
 984 start-sanitize-r5900
 985 Wed Apr 15 10:30:07 1998   Frank Ch. Eigler  <fche@cygnus.com>
 986
 987         * vu0.h: Specs changed for VCALLMSR bit pattern.
 988         * mips-dis.c: (print_insn_arg) Matching change.
 989
 990 end-sanitize-r5900
 991 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
 992
 993         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
 994         operator.
 995
 996 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
 997
 998         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
 999         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1000         * configure.in: Define and substitute WIN32LDFLAGS and
1001         WIN32LIBADD.
1002         * aclocal.m4: Rebuild with new libtool.
1003         * configure, Makefile.in: Rebuild.
1004
1005 start-sanitize-r5900
1006 Mon Apr 13 16:02:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1007
1008         * vu0.h: Corrected bit pattern for VMAXI opcode.
1009
1010 end-sanitize-r5900
1011 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1012
1013         * m32r-opc.c: Regenerate.
1014
1015 start-sanitize-sky
1016 Mon Apr  6 17:16:48 1998  Doug Evans  <devans@canuck.cygnus.com>
1017
1018         * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1019         (dvp_expand_macro): Implement.
1020         (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1021         (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1022
1023 end-sanitize-sky
1024 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1025
1026         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1027         before trying to copy it.
1028         * Makefile.in: Rebuild.
1029
1030 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1031
1032         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1033
1034 start-sanitize-m32rx
1035 Thu Apr  2 16:44:23 1998  Nick Clifton  <nickc@cygnus.com>
1036
1037         * m32r-opc.c: Fix bit patterns for SAT and SATB.
1038
1039 end-sanitize-m32rx
1040 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1041
1042         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1043         from an arbitrary valid buffer instead of fetching them on demand
1044         using fetch_data().
1045         (invalid_float): use bit_extract_simple() instead of bit_extract().
1046
1047 start-sanitize-m32rx
1048 Wed Apr  1 14:57:54 1998  Nick Clifton  <nickc@cygnus.com>
1049
1050         * m32r-opc.c: Fix SATB bit pattern.  Add extra control registers.
1051         * m32r-opc.h: Add extra control registers.
1052
1053 end-sanitize-m32rx
1054 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1055
1056         From H.J. Lu <hjl@gnu.org>:
1057         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1058         to Ev for both.
1059
1060 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1061
1062         * Branched binutils 2.9.
1063
1064 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1065
1066         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1067         disassembling last 4 bytes of a section.
1068
1069 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1070
1071         Fix some gcc -Wall warnings:
1072         * arc-dis.c (print_insn): Add casts to avoid warnings.
1073         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1074         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1075 start-sanitize-sky
1076         * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1077         (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1078         (parse_bc, parse_vfreg, parse_accdest): Likewise.
1079         (parse_ffstreg, parse_vif_mode): Likewise.
1080 end-sanitize-sky
1081         * m10200-dis.c (disassemble): Likewise.
1082         * m10300-dis.c (disassemble): Likewise.
1083         * ns32k-dis.c (print_insn_ns32k): Likewise.
1084         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1085         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1086         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1087         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1088         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1089 start-sanitize-sky
1090         * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1091         * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1092         (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1093 end-sanitize-sky
1094         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1095 start-sanitize-tic80
1096         * tic80-dis.c (print_one_instruction): Likewise.
1097 end-sanitize-tic80
1098         * w65-dis.c (print_operand): Likewise.
1099         * z8k-dis.c (fetch_data): Likewise.
1100         * a29k-dis.c: Add return type for find_byte_func_type.
1101         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1102         insert_multshift and extract_multshift.
1103         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1104         conditionals.
1105         (extract_value): Fully parenthesize expression.
1106 start-sanitize-sky
1107         * dvp-opc.c: Include <ctype.h>.
1108         (print_sdest): Add default case to switch.
1109 end-sanitize-sky
1110         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1111         * h8500-opc.h (h8500_table): Fully bracket initializer.
1112         * w65-opc.h (optable): Likewise.
1113         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1114         * i386-dis.c (OP_E): Initialize local variables.
1115         * m10200-dis.c (print_insn_mn10200): Likewise.
1116         * mips-dis.c (print_insn_mips16): Likewise.
1117         * sh-dis.c (print_insn_shx): Likewise.
1118         * v850-dis.c (print_insn_v850): Likewise.
1119         * ns32k-dis.c (print_insn_arg): Declare.
1120         (get_displacement, invalid_float): Declare.
1121         (list_search, sign_extend, flip_bytes): Declare return type.
1122         (get_displacement): Likewise.
1123         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1124         string.
1125         (print_insn_ns32k): Make i unsigned.
1126         (invalid_float): Make static.  Declare type of val.
1127         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1128         on each for iteration.
1129         * tic30-dis.c (get_indirect_operand): Likewise.
1130         * z8k-dis.c (print_insn_z8001): Declare return type.
1131         (print_insn_z8002): Likewise.
1132         (unparse_instr): Fix sprintf format strings.
1133
1134 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1135
1136         * mips-opc.c: Add "sync.l" and "sync.p".
1137
1138 start-sanitize-sky
1139 Thu Mar 26 13:27:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1140
1141         * dvp-opc.c (extract_vif_datalen): Rewrite.
1142         (vif_insn_len): Perform 0->max+1 conversion for direct length.
1143
1144 Wed Mar 25 13:32:36 1998  Doug Evans  <devans@canuck.cygnus.com>
1145
1146         * dvp-dis.c (print_insn): Print unpack address in hex.
1147         * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1148         Don't skip over '*', just record it.
1149         (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1150         (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1151         Don't skip over '*', just record it.
1152         (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1153         (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1154         (vif_opcodes): Likewise.
1155         (state_vif_{mpg,unpack}loc_star_p): New static locals.
1156         (vif_macros,vif_macro_count): New globals.
1157         (vif_unpack_len_value): New arguments wl,cl.  All callers updated.
1158         (vif_set_{mpg,unpack}loc): Delete.  All callers updated.
1159         (vif_get_wl_cl): New function.
1160         (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1161
1162 end-sanitize-sky
1163 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1164
1165         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1166         default m68k variant to recognize.
1167
1168         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1169         (ctrl, cobr, mem, ea): Likewise.
1170         (print_addr): Likewise.  Remove cast.
1171         (ea): Cast argument of print_addr to bfd_vma.
1172
1173         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1174         variable value.
1175         (cgen_parse_unsigned_integer): Likewise.
1176         (cgen_parse_address): Likewise.
1177
1178 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1179
1180         * i960-dis.c (ctrl): Add full braces to structure initialization.
1181         (cobr, mem, reg): Likewise.
1182         (ea): Correct parenthesization in expression.
1183
1184         * cgen-asm.c: Include <ctype.h>.
1185         (build_asm_hash_table): Remove unused local variable i.
1186         (cgen_parse_keyword): Add casts to avoid warnings.
1187
1188         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1189         symbol.  Fix indentation.
1190         (print_insn_little_arm): Likewise.
1191
1192 start-sanitize-r5900
1193 Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)
1194
1195         * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1196         opcode extensions.
1197
1198 end-sanitize-r5900
1199 start-sanitize-m32rx
1200 Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>
1201
1202         * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1203         (PR15418).
1204
1205 end-sanitize-m32rx
1206 start-sanitize-sky
1207 Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>
1208
1209         * dvp-opc.c (vif_operand_datalen_special): New global.
1210
1211 end-sanitize-sky
1212 start-sanitize-r5900
1213 Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)
1214
1215         * vu0.h (vcallms): Use 'O' for call target operand.
1216         * mips-dis.c (print_insn_arg): Handle 'O'.
1217
1218 end-sanitize-r5900
1219 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1220
1221         * configure.in: Use AM_DISABLE_SHARED.
1222         * aclocal.m4, configure: Rebuild with libtool 1.2.
1223
1224 start-sanitize-r5900
1225 Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)
1226
1227         * mips-dis.c: Change '%' to '#' in r5900 support.
1228         * vu0.h: Likewise.
1229
1230 end-sanitize-r5900
1231 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1232
1233         These patches are courtesy of Jonathan Walton and Tony Thompson
1234         (athompso@cambridge.arm.com).
1235
1236         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1237         relative addresses.
1238
1239         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1240         both the offset and the label closest to the destination.
1241
1242 start-sanitize-r5900
1243 Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)
1244
1245         * vu0.h: New file with cop2/vu0 instructions.
1246         * mips-opc.c: Include vu0.h.
1247         * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1248         J, Q, X, and U.
1249         (print_insn_mips): Do not emit a tab after an instruction if the
1250         first arg is an instruction completer (&).  If the next arg is an
1251         escape character (%), then print the next arg verbatim.
1252         * Makefile.am (mips-opc.lo): Depend on vu0.h
1253
1254 end-sanitize-r5900
1255 start-sanitize-sky
1256 Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>
1257
1258         * dvp-opc.c (vif_opcodes): Add stcycl.
1259
1260 Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>
1261
1262         * dvp-dis.c (print_dma): Change length from 16 to 8.
1263
1264 end-sanitize-sky
1265 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1266
1267         * m32r-opc.h: Regenerate.
1268
1269 start-sanitize-sky
1270 Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>
1271
1272         * dvp-opc.c (print_dest1): Print dest spec again.
1273         (print_vfreg,print_accdest): Likewise.
1274         (vif_unpack_len): Round result up to word boundary.
1275
1276 end-sanitize-sky
1277 start-sanitize-vr4320
1278 Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>
1279
1280         * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1281
1282 Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>
1283
1284         * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1285         of these.
1286
1287 end-sanitize-vr4320
1288 start-sanitize-sky
1289 Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>
1290
1291         * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1292         (print_insn): Do mask comparison on proper opcode word.
1293         Print unsigned values in hex.
1294         * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1295         (parse_bc): Catch missing dest.
1296         (parse_vfreg): Replace atoi call with strtol.
1297         (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1298         (parse_bcftreg,parse_ffstreg): Handle missing dest.
1299         (extract_gif_eop): New function.
1300         (gif_operands): Update eop entry.
1301         (VGIFOP,VGIFNREGS): Fix calcs.
1302         (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1303         (gif_regs): Add entry for unused 11 case.
1304         (print_gif_regs): Print empty list instead of nothing.
1305         (extract_gif_nloop): Fix value calc.
1306         (print_gif_nloop): Always print value, even if 0.
1307         (insert_vif_wlcl,extract_vif_wlcl): New functions.
1308         (vif_operands): Use them for wl,cl fields.
1309         (state_vif_wl,state_vif_cl): New static locals.
1310         (parse_vif_mode): Handle numeric args.
1311         (vif_unpack_len_value,vif_unpack_len): New functions.
1312         (vif_insn_len): Call vif_unpack_len.
1313
1314 end-sanitize-sky
1315 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1316
1317         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1318
1319 Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>
1320
1321         * cgen-asm.in: Move insertion of generated routines to top of file.
1322         (insert_normal): Add prototype.  Delete `shift' arg.
1323         * cgen-dis.in: Move insertion of generated routines to top of file.
1324         (extract_normal): Add prototype.  Delete `shift' arg.
1325         (print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
1326         (print_keyword): Add prototype.  Fix type of `attrs' arg.
1327
1328 start-sanitize-vr4320
1329 Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>
1330
1331         * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1332         * mips-opc.c ("mac","dmac") : Added 4320 insns.
1333
1334 end-sanitize-vr4320
1335 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1336
1337         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1338         assume that info->symbols is non-empty.
1339
1340 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1341
1342         * alpha-opc.c (cvtqs) There is no such thing.
1343         (cvttq): Missing most of the /*d variants.
1344
1345 start-sanitize-r5900
1346 Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
1347
1348         * mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
1349         opcode.
1350         (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1351         (r5900/msub.s): Takes three operands, not four.  Fix opcode.
1352
1353 end-sanitize-r5900
1354 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1355
1356         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1357         delayed branches or jumps.
1358
1359 start-sanitize-sky
1360 Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>
1361
1362         * dvp-opc.c (vif_operands): Add unpack[u] support.
1363         (vif_opcodes): Ditto.
1364         (*_vif_imrubits): Renamed from *_vif_imrbits.
1365
1366 Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1367
1368         * dvp-dis.c (print_insn): Handle word number.
1369         Handle mips address vs vu address.
1370         * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1371         (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1372         ({insert,extract}_dma_addr): Fix word ofset.
1373         ({insert,print}_gif_regs): Fix encode/decode.
1374
1375 end-sanitize-sky
1376 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1377
1378         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1379         to *info->symbols.
1380         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1381         * tic30-dis.c (print_branch): Likewise.
1382 start-sanitize-sky
1383         * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1384         * dvp-dis.c (dvp_info_mach_type): New function.
1385         (print_insn_dvp): Call it.
1386         (print_vif): Return length of 4 if mpg or direct insn so following
1387         insns get properly disabled.
1388         (print_gif): Fix word order.
1389         * dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
1390         (gif_operands): Fix word order.
1391         (gif_opcodes): Likewise.
1392         ({insert,extract,print}_gif_regs): Likewise.
1393         (gif_regs): Add new register number/name changes.
1394         (dma_opcodes): Add dmarefe insn.
1395 end-sanitize-sky
1396
1397 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1398
1399         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1400         saved_symbol code as it is no longer needed.
1401
1402 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1403
1404         * cgen-asm.c: Include symcat.h.
1405         * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1406
1407         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1408
1409 start-sanitize-sky
1410 Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>
1411
1412         * dvp-opc.c (extra_dma_flags): Fix typos.
1413         (dma_operands): Fix word numbers.
1414         (dma_opcodes): Likewise.
1415         ({insert,extract}_dma_flags): Likewise.
1416
1417 end-sanitize-sky
1418 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1419
1420         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1421
1422 start-sanitize-sky
1423 Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>
1424
1425         * dvp-dis.c (print_gif): Complete.
1426         * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1427         (state_gif_{nregs,regs,nloop}): New static locals.
1428         (*_gif_*): Complete.
1429         (dvp_opcode_init_{parse,print}): Init gif state locals.
1430         (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1431         (vif_insn_len): Handle `unpack'.
1432         ({insert,extract}_dma_flags): Complete.
1433
1434 end-sanitize-sky
1435 start-sanitize-r5900
1436 Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)
1437
1438         * mips-opc.c (mula.s): Renamed from multa.s.
1439
1440 end-sanitize-r5900
1441 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1442
1443         * m32r-opc.[ch]: Regenerate.
1444
1445 start-sanitize-sky
1446 Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>
1447
1448         * dvp-opc.c (dma_operands): Rewrite.
1449         (dma_operand_{count,addr}): New globals.
1450         (dma_opcodes): Rewrite.  Add "dmaend" with no operands.
1451         (insert_dma_addr): Insert value into insn.
1452         (extract_dma_addr): Extract value from insn.
1453
1454 Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>
1455
1456         * dvp-dis.c (print_vu): Handle loi insns.
1457         (print_insn): Likewise.
1458         * dvp-opc.c (vu_lower_opcodes): Add "loi".
1459         (vu_operands): Make LDEST1 a FAKE operand.
1460         (parse_dest1): Allow elided argument.
1461         (print_dest1): Don't print the argument.
1462
1463 Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>
1464
1465         * dvp-opc.c (parse_vfreg): Dest spec is optional.
1466         (print_vfreg): Don't print dest spec.
1467         (parse_accdest): Dest spec is optional.
1468         (print_accdest): Don't print dest spec.
1469
1470 end-sanitize-sky
1471 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1472
1473         * Makefile.am (CGENFILES): Update.
1474         * Makefile.in: Regenerate.
1475         * cgen-asm.in (insert_normal): Result is error message now.
1476         Validate value to be inserted.
1477         (insert_insn_normal): Result is error message now.
1478         (@arch@_cgen_assemble_insn): Update.
1479         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1480         arguments.  Don't perform validation here.
1481         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1482
1483 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1484
1485         * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1486         operand instance list.
1487         * m32r-opc.c: Regenerate.
1488
1489 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1490
1491         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1492         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1493
1494 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1495
1496         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1497
1498 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1499
1500         * configure.in: Get the version number from BFD.
1501         * configure: Rebuild.
1502
1503         From H.J. Lu <hjl@gnu.org>:
1504         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1505         * Makefile.in: Rebuild.
1506
1507 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1508
1509         * m32r-opc.c: Regenerate.
1510         * m32r-opc.h: Regenerate.
1511
1512 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
1513
1514         * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1515         Ignore ALIAS insns if asked to.
1516         (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1517         * m32r-opc.c: Regenerate.
1518
1519 start-sanitize-sky
1520         * dvp.opc.c: Nicely format opcode tables.
1521         (vu_operands): New element UFLAGS.
1522         (parse_uflags,print_uflags): New functions.
1523         (vu_upper_opcodes): Add UFLAGS to all insns.
1524
1525 end-sanitize-sky
1526 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
1527
1528         Fix rac to accept only a0:
1529         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1530         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1531         Introduce OPERAND_GPR.
1532         * d10v-dis.c (print_operand): Likewise.
1533
1534 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
1535
1536         * cgen-opc.in: New file.
1537         * cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
1538         * Makefile.am (CGENFILES): Add cgen-opc.in.
1539         * Makefile.in: Regenerate.
1540
1541         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1542         (cgen_hw_lookup): Make result const.
1543
1544         * cgen-dis.in (*): Use PTR instead of void *.
1545         (print_insn): Delete unused vars `i', `syntax'.
1546
1547         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1548
1549 start-sanitize-sky
1550 Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>
1551
1552         * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1553         (vif_opcodes): Update renamed insns.
1554         * dvp-dis.c (*): Likewise.
1555
1556 end-sanitize-sky
1557 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1558
1559         * configure, aclocal.m4: Rebuild with new libtool.
1560
1561 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
1562
1563         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1564         instructions use a PC relative branch, not absolute.
1565
1566 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
1567
1568         * configure.in: Set libtool_enable_shared rather than
1569         libtool_shared.  Remove diversion hack.
1570         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1571
1572 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
1573
1574         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1575         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1576
1577 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
1578
1579         * tic30-dis.c: New file.
1580         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1581         * configure.in: Handle bfd_tic30_arch.
1582         * Makefile.am: Rebuild dependencies.
1583         (CFILES): Add tic30-dis.c
1584         (ALL_MACHINES): Add tic30-dis.lo.
1585         * configure, Makefile.in: Rebuild.
1586
1587 start-sanitize-m32rx
1588 Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>
1589
1590         * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1591         versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1592         macwhi-a and macwlo-a instructions.
1593
1594 end-sanitize-m32rx
1595 start-sanitize-sky
1596 Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>
1597
1598         * dvp-opc.c, fixed encoding of a bunch of instructions to
1599         be consistent with the asmvu assembler (and inconsistent
1600         with the specification).
1601
1602 Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>
1603
1604         * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1605         in the opcode table.  The pkemscalf instruction must come first.
1606
1607 Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>
1608
1609         * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1610
1611 end-sanitize-sky
1612 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
1613
1614         * m32r-opc.h (HAVE_CPU_M32R): Define.
1615
1616 start-sanitize-sky
1617 Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>
1618
1619         * dvp-dis.c, dvp-opc.c: New files.
1620         * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1621         * configure: Regenerate.
1622         * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1623         (dvp-dis.lo,dvp-opc.lo): Add rules for.
1624         (mips-dis.lo): Compile with @archdefs@.
1625         * Makefile.in: Regenerate.
1626         * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1627         * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1628
1629 end-sanitize-sky
1630 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
1631
1632         * v850-opc.c (insertion routines): If both alignment and size is
1633         wrong then report this.
1634
1635 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
1636
1637         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1638         Only recognize instructions for the current target_processor.
1639
1640 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
1641
1642         * d10v-dis.c (PC_MASK): Correct value.
1643         (print_operand): If there's a reloc, don't calculate the
1644         address because they could be in different sections.
1645
1646 start-sanitize-cygnus
1647 Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>
1648
1649         * cgen.sh: Rewrite to be like simulator's version.
1650         * Makefile.am (cgen): Update call to cgen.sh.
1651         * Makefile.in: Regenerate
1652
1653 end-sanitize-cygnus
1654 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
1655
1656         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1657         instruction after the 4650's "mul" instruction; nobody's using the
1658         4010 these days.  If object files someday indicate which processor
1659         variant they're intended for, we can do a better job at this.
1660
1661 start-sanitize-r5900
1662 Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)
1663
1664         * mips-opc.c (c.lt.s): Add r5900 variant.
1665         (c.le.s): Likewise.
1666
1667 end-sanitize-r5900
1668 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1669
1670         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1671         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1672         (cgen_parse_keyword): Rewrite.
1673         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1674         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1675         * cgen-opc.c: Clean up pass over `struct foo' usage.
1676         (cgen_keyword_lookup_value): Handle "" entry.
1677         (cgen_keyword_add): Likewise.
1678 start-sanitize-cygnus
1679         * Makefile.am: Add cgen support.
1680         * Makefile.in: Regenerate.
1681         * configure.in: Add cgen support.
1682         * configure: Regenerate.
1683         * aclocal.m4: Regenerate.
1684         * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1685 end-sanitize-cygnus
1686
1687 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1688
1689         * mips-opc.c: Add FP_D to s.d instruction flags.
1690
1691 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1692
1693         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1694
1695 start-sanitize-tic80
1696 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1697
1698         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1699         PC relative offset forms before the 15 bit forms.  An assembler command
1700         line option now chooses the default.
1701
1702 end-sanitize-tic80
1703 start-sanitize-r5900
1704 Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)
1705
1706         * mips-opc.c: Add many missing r5900 instructions.
1707
1708 end-sanitize-r5900
1709 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1710
1711         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1712         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1713
1714 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1715
1716         * configure: Only build libopcodes shared if --enable-shared's value
1717         was `yes', or was set to `*opcodes*'.
1718         * aclocal.m4: Likewise.
1719         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1720         original source of this bit of code.  It's not clear what the best fix
1721         would be, though.
1722
1723 start-sanitize-r5900
1724 Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)
1725
1726         * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1727 end-sanitize-r5900
1728 start-sanitize-tic80
1729 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1730
1731         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1732         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1733         offset forms before the 15 bit forms, to default to the long forms.
1734
1735 end-sanitize-tic80
1736 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1737
1738         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1739
1740 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1741
1742         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1743         symbol if none is present.
1744         (print_insn_big_arm):  Prevent examination of stored symbol if
1745         none is present.
1746
1747 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1748
1749         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1750
1751 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1752
1753         * disassemble.c: Remove disasm_symaddr() function.
1754
1755         * arm-dis.c: Use info->symbol instead of info->flags to determine
1756         if disassmbly should be in Thumb or Arm mode.
1757
1758 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1759
1760         * arm-dis.c: Add support for disassembling Thumb opcodes.
1761         (print_insn_thumb): New function.
1762
1763         * disassemble.c (disasm_symaddr): New function.
1764
1765         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1766         (thumb_opcodes): Table of Thumb opcodes.
1767
1768 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1769
1770         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1771
1772         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1773         and 'v' as operand types.
1774
1775 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1776
1777         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1778         <olivier.carmona@di.epfl.ch>.
1779         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1780         which has a two word opcode with a one word argument.
1781
1782 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1783
1784         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1785         unsigned, not signed.
1786         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1787
1788 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
1789
1790         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1791         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1792         (ftrv): Slay the cut-and-paste monster.
1793
1794 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1795
1796         * d10v-dis.c (print_operand):
1797         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1798
1799 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1800
1801         * d10v-opc.c (OPERAND_FLAG): Split into:
1802         (OPERAND_FFLAG, OPERAND_CFLAG) .
1803         (FSRC): Split into:
1804         (FFSRC, CFSRC).
1805
1806 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1807
1808         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1809         field for all INSN_MACRO's.
1810         * mips16-opc.c: same
1811
1812 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1813
1814         * mips-opc.c (sync,cache): These are 3900 insns.
1815
1816 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1817
1818         sh-opc.h (sh_table): Remove ftst/nan.
1819
1820 start-sanitize-cygnus
1821 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
1822
1823         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1824         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1825         last.
1826         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1827
1828 end-sanitize-cygnus
1829 start-sanitize-tx49
1830 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
1831
1832         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1833         Add tx49 insns and configury.
1834
1835 end-sanitize-tx49
1836 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1837
1838         * mips-opc.c (ffc, ffs): Fix mask.
1839
1840 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1841
1842         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1843         control registers.
1844
1845 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1846
1847         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1848 start-sanitize-cygnus
1849         Added VR5400 instructions.
1850         (N5): New cpu-id macro.
1851 end-sanitize-cygnus
1852         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1853
1854 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1855
1856         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1857         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1858
1859 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1860
1861         * v850-dis.c (disassemble): Replace // with /* ... */
1862
1863 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1864
1865         * sparc-opc.c: Add wr & rd for v9a asr's.
1866         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1867         (v9a_asr_reg_names): New variable.
1868         Patch from David Miller <davem@vger.rutgers.edu>.
1869
1870 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1871
1872         * sparc-opc.c (v9notv9a): New insn type.
1873         (IMPDEP): Move to the end to not conflict with edge8 et al.
1874         Patch from David Miller <davem@vger.rutgers.edu>.
1875
1876 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1877
1878         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1879
1880 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1881
1882         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1883
1884 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1885
1886         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1887         of disassemble_info structure to determine if an overlay address
1888         has a matching symbol in low memory.
1889
1890         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1891         new symbol_at_address_func field in disassemble_info structure.
1892
1893 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1894
1895         * v850-opc.c (extract_d22): Use signed arithmatic.
1896
1897 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1898
1899         * mips-opc.c: Three op mult is not an ISA insn.
1900
1901 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1902
1903         * mips-opc.c: Fix formatting.
1904
1905 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1906
1907         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1908         than assuming that char is signed.  Explicitly sign extend 16 bit
1909         values, rather than assuming that short is 16 bits.
1910         (OP_sI, OP_J, OP_DIR): Likewise.
1911
1912 start-sanitize-v850e
1913 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1914
1915         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1916         system registers.
1917
1918 end-sanitize-v850e
1919 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1920
1921         * v850-opc.c: Fix typo in comment.
1922
1923         * v850-dis.c (disassemble): Add test of processor type when
1924         determining opcodes.
1925
1926 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1927
1928         * configure.in: Use a diversion to set enable_shared before the
1929         arguments are parsed.
1930         * configure: Rebuild.
1931
1932 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1933
1934         * m68k-opc.c (TBL1): Use ! rather than `.
1935         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1936
1937 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1938
1939         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1940
1941         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1942
1943         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1944         for mcf5200.
1945
1946         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1947         * aclocal.m4: Rebuild with new libtool.
1948         * configure: Rebuild.
1949
1950 start-sanitize-v850e
1951 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1952
1953         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1954
1955 end-sanitize-v850e
1956 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1957
1958         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1959
1960 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1961
1962         * v850-opc.c (v850_opcodes): Further rearrangements.
1963
1964 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1965
1966         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1967
1968 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1969
1970         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1971         parser to work.
1972
1973 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1974
1975         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1976 start-sanitize-tx19
1977         * mips16-opc.c: Added mips16 sdbbp.
1978 end-sanitize-tx19
1979
1980 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1981
1982         * v850-opc.c: Initialise processors field of v850_opcode structure.
1983
1984 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1985
1986         Merge changes from Martin Hunt:
1987
1988         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1989
1990         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1991         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1992         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1993
1994         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1995
1996         * d30v-dis.c (print_insn): First operand of d*i (delayed
1997         branch) instructions is relative.
1998
1999         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2000         (d30v_operand_table): Add IMM6S3 type.
2001         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2002
2003         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2004         and cmp instructions.
2005
2006         * d30v-opc.c: Correct entries for repeat*, and sat*.
2007         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2008         types. Correct several formats.
2009
2010         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2011
2012         * d30v-opc.c (pre_defined_registers): Change control registers.
2013
2014         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2015         SHORT_C2.  Manual was incorrect.
2016
2017         * d30v-dis.c (lookup_opcode):  Return value now indicates
2018         if an opcode has a short and a long form.  Used for deciding
2019         to append a ".s" or ".l".
2020         (print_insn): Append a ".s" to an instruction if it is
2021         the short form and ".l" if it is a long form. Do not append
2022         anything if the instruction has only one possible size.
2023
2024         * d30v-opc.c: Change mulx2h to require an even register.
2025         New form: SHORT_A2; a SHORT_A form that needs an even
2026         register as the first operand.
2027
2028         * d30v-dis.c (print_insn_d30v): Fix problem where the last
2029         instruction was not being disassembled if there were an odd
2030         number of instructions.
2031
2032         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
2033
2034 start-sanitize-v850e
2035 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
2036
2037         * v850-dis.c (disassemble): Improved display of register lists.
2038
2039 end-sanitize-v850e
2040 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
2041
2042         * sparc-opc.c (sparc_opcodes): Fix assembler args to
2043         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2044         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2045         fandnot1s, fandnot2s.
2046
2047 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
2048
2049         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2050
2051 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
2052
2053         * cgen-asm.c (cgen_parse_address): New argument resultp.
2054         All callers updated.
2055         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2056
2057 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
2058
2059         * mn10200-dis.c (disassemble): PC relative instructions are
2060         relative to the next instruction, not the current instruction.
2061
2062 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
2063
2064         * v850-dis.c (disassemble): Only signed extend values that are not
2065         returned by extract functions.
2066         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2067
2068 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
2069
2070         * v850-opc.c: Update comments.  Remove use of
2071         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
2072
2073 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
2074
2075         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2076
2077 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
2078
2079         * configure: Rebuilt with latest devo autoconf for NT support.
2080
2081 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
2082
2083         * v850-dis.c (disassemble): Use curly brace syntax for register
2084         lists.
2085
2086         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2087         where r0 is being used as a destination register.
2088
2089 start-sanitize-v850e
2090 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
2091
2092         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2093 end-sanitize-v850e
2094
2095 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
2096
2097         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2098         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2099         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
2100         Add insns to access SGR and DBR.
2101         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2102
2103 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
2104
2105         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2106
2107 start-sanitize-v850e
2108 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
2109
2110         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2111         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2112         opcodes..
2113
2114 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2115
2116         * configure (cgen_files): Add support for v850e target.
2117         * configure.in (cgen_files):  Add support for v850e target.
2118
2119 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2120
2121         * configure (cgen_files): Add support for v850ea target.
2122         * configure.in (cgen_files):  Add support for v850ea target.
2123 end-sanitize-v850e
2124
2125 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
2126
2127         * configure.in (bfd_arc_arch): Add.
2128         * configure: Rebuild.
2129         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2130         * Makefile.in: Rebuild.
2131         * arc-dis.c, arc-opc.c: New files.
2132         * disassemble.c (ARCH_all): Define ARCH_arc.
2133         (disassembler): Add ARC support.
2134
2135 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
2136
2137 start-sanitize-v850e
2138         * v850-dis.c (disassemble): Add support for v850EA instructions.
2139
2140         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2141         (v850_opcodes): Add v850EA instructions.
2142
2143         * v850-dis.c (disassemble): Add support for v850E instructions.
2144
2145         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2146         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2147         insert_spe, extract_spe): New Functions.
2148         (v850_opcodes): Add v850E instructions.
2149 end-sanitize-v850e
2150
2151         * v850-opc.c: Reorganised and re-layed out to improve readability
2152         and portability.
2153
2154 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
2155
2156         * configure: Rebuild with autoconf 2.12.1.
2157
2158 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2159
2160         * aclocal.m4, configure: Rebuild with new automake patches.
2161
2162 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
2163
2164         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2165         * acinclude.m4: Just include acinclude.m4 from BFD.
2166         * aclocal.m4, configure: Rebuild.
2167
2168 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
2169
2170         * Makefile.am: New file, based on old Makefile.in.
2171         * acconfig.h: New file.
2172         * acinclude.m4: New file.
2173         * stamp-h.in: New file.
2174         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2175         Removed shared library handling; now handled by libtool.  Replace
2176         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
2177         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
2178         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
2179         handling in AC_OUTPUT.
2180         * dep-in.sed: Change .o to .lo.
2181         * Makefile.in: Now built with automake.
2182         * aclocal.m4: Now built with aclocal.
2183         * config.in, configure: Rebuild.
2184
2185 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
2186
2187         * mips-opc.c: Fix typo/thinko in "eret" instruction.
2188
2189 start-sanitize-r5900
2190 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
2191
2192         * mips-opc.c: Fix coding of mtsa.
2193
2194 end-sanitize-r5900
2195 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
2196
2197         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2198         Make array const.
2199         * sparc-dis.c (sorted_opcodes): New static local.
2200         (struct opcode_hash): `opcode' is pointer to const element.
2201         (build_hash): First arg is now table of sorted pointers.
2202         (print_insn_sparc): Sort opcodes by sorting table of pointers.
2203         (compare_opcodes): Update.
2204
2205 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
2206
2207         * cgen-opc.c: #include <ctype.h>.
2208         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
2209         Handle case insensitive hashing.
2210         (hash_keyword_value): Change type of `value' to unsigned int.
2211
2212 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
2213
2214         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2215         precision FP, mark it as such.  Likewise for double precision
2216         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
2217         possible.
2218 start-sanitize-r5900
2219         (mips_builtin_opcodes): Remove non-existant r5900 instructions
2220 end-sanitize-r5900
2221
2222 start-sanitize-r5900
2223 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
2224
2225         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2226         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2227
2228 end-sanitize-r5900
2229 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
2230
2231         * ppc-opc.c (extract_nsi): make unsigned expression signed before
2232         negating it.
2233         (UNUSED): remove one level of parens, so MSVC doesn't choke on
2234         nesting depth when all the macros are expanded.
2235
2236 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
2237
2238         * sparc-opc.c: The fcmp v9a instructions take an integer register
2239         as a destination, not a floating point register.  From Christian
2240         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2241
2242 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
2243
2244         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2245         syntax.  From Roman Hodek
2246         <rnhodek@faui22c.informatik.uni-erlangen.de>.
2247
2248         * i386-dis.c (twobyte_has_modrm): Fix pand.
2249
2250 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
2251
2252         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2253
2254 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
2255
2256         * arm-dis.c: Add prototypes for arm_decode_shift and
2257         print_insn_arm.
2258
2259 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
2260
2261         * mips-opc.c: Add r3900 insns.
2262
2263 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2264
2265         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
2266         print delay slot instructions on the same line.  When using a PC
2267         relative load, add a comment with the value being loaded if it can
2268         be obtained.
2269
2270 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
2271
2272         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2273         to pushS/popS for segment regs and byte constant so that
2274         pushw/popw printed when in 16 bit data mode.
2275
2276         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2277         print cbtw, cwtd in 16 bit data mode.
2278         * i386-dis.c (putop): extra case W to support above.
2279
2280         * i386-dis.c (print_insn_x86): print addr32 prefix when given
2281         address size prefix in 16 bit address mode.
2282
2283 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
2284
2285         * sh-dis.c: Reindent.  Rename local variable fprintf to
2286         fprintf_fn.
2287
2288 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
2289
2290         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2291
2292 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
2293
2294         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2295           field membership.
2296         * mips16-opc.c (mip16_opcodes): same.
2297
2298 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2299
2300         * m68k-opc.c (moveb): Change $d to %d.
2301
2302 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2303
2304         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2305         (twobyte_has_modrm): Likewise.
2306         (grps): Likewise.
2307         (OP_MMX, OP_EM, OP_MS): New static functions.
2308
2309         * i386-dis.c: Revert patch of April 4.  The output now matches
2310         what gcc generates.
2311
2312 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2313
2314         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2315         of $simm16.
2316
2317 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2318
2319         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2320
2321 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2322
2323         * Makefile.in (install): Depend upon installdirs.
2324         (installdirs): New target.
2325
2326 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2327
2328         From Thomas Graichen <graichen@rzpd.de>:
2329         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2330         * configure: Rebuild.
2331
2332 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2333
2334         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2335         Delete string{,s}.h support.
2336
2337 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2338
2339         * cgen-asm.c (cgen_parse_operand_fn): New global.
2340         (cgen_parse_{{,un}signed_integer,address}): Update call to
2341         cgen_parse_operand_fn.
2342         (cgen_init_parse_operand): New function.
2343         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2344         from cgen_asm_init_parse.
2345         (m32r_cgen_assemble_insn): New operand `errmsg'.
2346         Delete call to as_bad, return error message to caller.
2347         (m32r_cgen_asm_hash_keywords): #if 0 out.
2348
2349 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2350
2351         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2352         not data register.
2353         [case 'J']: Fix typo in register name.
2354
2355 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2356
2357         * configure.in: Substitute SHLIB_LIBS.
2358         * configure: Rebuild.
2359         * Makefile.in (SHLIB_LIBS): New variable.
2360         ($(SHLIB)): Use $(SHLIB_LIBS).
2361
2362 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2363
2364         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2365
2366         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2367
2368         * disassemble.c (disassembler): Handle m32r.
2369
2370 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2371
2372         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2373         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2374         * Makefile.in (CFILES): Add them.
2375         (ALL_MACHINES): Add them.
2376         (dependencies): Regenerate.
2377         * configure.in (cgen_files): New variable.
2378         (bfd_m32r_arch): Add entry.
2379         * configure: Regenerate.
2380
2381 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2382
2383         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2384         * configure: Rebuild.
2385
2386         * Makefile.in: Rebuild dependencies.
2387
2388         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2389
2390         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2391         fdivp.
2392
2393 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2394
2395         * Branched binutils 2.8.
2396
2397 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2398
2399         * m10200-dis.c: Rename from mn10200-dis.c.
2400         * m10200-opc.c: Rename from mn10200-opc.c.
2401         * m10300-dis.c: Rename from mn10300-dis.c
2402         * m10300-opc.c: Rename from mn10300-opc.c.
2403         * Makefile.in: Update accordingly.
2404
2405         * mips16-opc.c: Add mul and dmul macros.
2406
2407 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2408
2409         * makefile.vms: Update CFLAGS, add clean target.
2410
2411 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2412
2413         * mips-opc.c: Add "wait".  From Ralf Baechle
2414         <ralf@gnu.ai.mit.edu>.
2415
2416         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2417         * configure, config.in: Rebuild.
2418         * sysdep.h: Include <stdlib.h> if it exists.
2419         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2420         <string.h>.
2421         * Makefile.in: Rebuild dependencies.
2422
2423 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2424
2425         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2426         Andrew Bray <andy@madhouse.demon.co.uk>.
2427
2428         * mips-opc.c: Add cast when setting mips_opcodes.
2429
2430 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2431
2432         * v850-dis.c (disassemble):  Fix sign extension problem.
2433         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2434         disassembly calculate branch offsets correctly.
2435
2436 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2437
2438         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2439
2440         * mips-opc.c: Add dctr and dctw.
2441
2442 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2443
2444         * d30v-dis.c (print_insn): Change the way signed constants
2445         are displayed.
2446
2447 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2448
2449         * Makefile.in (BFD_H): New variable.
2450         (HFILES): New variable.
2451         (CFILES): Add all C files.
2452         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2453         Delete old dependencies, and build new ones.
2454         * dep-in.sed: New file.
2455
2456 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2457
2458         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2459
2460 start-sanitize-coldfire
2461 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
2462
2463         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2464         instructions.
2465
2466 end-sanitize-coldfire
2467 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2468
2469         * mn10200-opc.c: Change "trap" to "syscall".
2470         * mn10300-opc.c: Add new "syscall" instruction.
2471
2472 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2473
2474         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2475         mulul insns on the coldfire.
2476
2477 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2478
2479         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2480         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2481         (print_insn_little_arm): Likewise.
2482
2483 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2484
2485         Based on patches from H.J. Lu <hjl@lucon.org>:
2486         * i386-dis.c (fetch_data): Add prototype.
2487         * m68k-dis.c (fetch_data): Add prototype.
2488         (dummy_print_address): Add prototype.  Make static.
2489         * ppc-opc.c (valid_bo): Add prototype.
2490         * sparc-dis.c (build_hash_table): Add prototype.
2491         (is_delayed_branch, compute_arch_mask): Add prototypes.
2492         (print_insn_sparc): Make several local variables const.
2493         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2494         * sparc-opc.c (arg): Change name field to be const.
2495         (lookup_name, lookup_value): Add prototypes.  Change table and
2496         name parameters to be const.
2497         (sparc_encode_asi): Change name parameter to be const.
2498         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2499         (sparc_encode_sparclet_cpreg): Likewise.
2500         (sparc_decode_asi): Change return type to be const.
2501         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2502         (sparc_decode_sparclet_cpreg): Likewise.
2503
2504 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2505
2506         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2507         Solaris doesn't like the combined options, and the -f is
2508         unnecessary.
2509         (stamp-tshlink, install): Likewise.
2510
2511 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2512
2513         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2514         as relaxable.
2515
2516 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2517
2518         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2519
2520 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2521
2522         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2523         the mc68000.
2524
2525 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2526
2527         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2528
2529 start-sanitize-tic80
2530 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2531
2532         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2533
2534 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2535
2536         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2537
2538 end-sanitize-tic80
2539 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2540
2541         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2542         floatformat_to_double to make portable.
2543         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2544         precision float.
2545
2546 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2547
2548         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2549         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2550
2551 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2552
2553         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2554         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2555
2556 start-sanitize-tic80
2557 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2558
2559         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2560         (OFF_SL_BR_SCALED): ... to this, and added the flag
2561         TIC80_OPERAND_BASEREL to the flags word.
2562         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2563         OFF_SL_BR_SCALED.
2564
2565 end-sanitize-tic80
2566 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2567
2568         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2569         Change mips_opcodes from const array to a pointer,
2570         and change bfd_mips_num_opcodes from const int to int,
2571         so that we can increase the size of the mips opcodes table
2572         dynamically.
2573
2574 start-sanitize-tic80
2575 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2576
2577         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2578         store BITNUM values in the table in one's complement form
2579         to match behavior when assembler is given a raw numeric
2580         value for a BITNUM operand.
2581         * tic80-dis.c (print_operand_bitnum): Ditto.
2582
2583 end-sanitize-tic80
2584 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2585
2586         * d30v-opc.c: Removed references to FLAG_X.
2587
2588 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2589
2590         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2591
2592 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2593
2594         * Makefile.in: Added d30v object files.
2595         * configure: (bfd_d30v_arch) Rebuilt.
2596         * configure.in: (bfd_d30v_arch) Added new case.
2597         * d30v-dis.c: New file.
2598         * d30v-opc.c: New file.
2599         * disassemble.c (disassembler) Add entry for d30v.
2600
2601 start-sanitize-tic80
2602 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2603
2604         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2605         representations for the floating point BITNUM values.
2606
2607 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2608
2609         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2610         in the table in one's complement form, as they appear in the
2611         actual instruction.
2612         (tic80_symbol_to_value): Use macros to access predefined
2613         symbol fields.
2614         (tic80_value_to_symbol): Ditto.
2615         (tic80_next_predefined_symbol): New function.
2616         * tic80-dis.c (print_operand_bitnum): Remove code that did
2617         one's complement for BITNUM values.
2618
2619 end-sanitize-tic80
2620 start-sanitize-r5900
2621 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
2622
2623         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2624
2625 end-sanitize-r5900
2626 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2627
2628         * makefile.vms: Remove 8 bit characters.  Update to latest
2629         gcc release.
2630
2631 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2632
2633         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2634
2635 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2636
2637         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2638         (IMM24_PCREL): Likewise.
2639
2640 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2641
2642         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2643         address for an extended PC relative instruction that is not a
2644         branch.
2645
2646 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2647
2648         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2649         bytes_per_line.
2650
2651 start-sanitize-tic80
2652 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2653
2654         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2655         (tic80_opcodes): Sort entries so that long immediate forms
2656         come after short immediate forms, making it easier for
2657         assembler to select the right one for a given operand.
2658
2659 end-sanitize-tic80
2660 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2661
2662         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2663         display_endian.
2664         (print_insn_mips16): Likewise.
2665
2666 start-sanitize-r5900
2667 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
2668
2669         * mips-opc.c: add r5900.
2670
2671 end-sanitize-r5900
2672 start-sanitize-tic80
2673 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2674
2675         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2676         a symbol class that restricts translation to just that
2677         class (general register, condition code, etc).
2678
2679 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2680
2681         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2682         and REG_DEST_E for register operands that have to be
2683         an even numbered register.  Add REG_FPA for operands that
2684         are one of the floating point accumulator registers.
2685         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2686         (tic80_opcodes): Change entries that need even numbered
2687         register operands to use the new operand table entries.
2688         Add "or" entries that are identical to "or.tt" entries.
2689
2690 end-sanitize-tic80
2691 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2692
2693         * mips16-opc.c: Add new cases of exit instruction for
2694         disassembler.
2695         * mips-dis.c (print_mips16_insn_arg): Display floating point
2696         registers in operands of exit instruction.  Print `$' before
2697         register names in operands of entry and exit instructions.
2698
2699 start-sanitize-tic80
2700 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2701
2702         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2703         pairs for all predefined symbols recognized by the assembler.
2704         Also used by the disassembling routines.
2705         (tic80_symbol_to_value): New function.
2706         (tic80_value_to_symbol): New function.
2707         * tic80-dis.c (print_operand_control_register,
2708         print_operand_condition_code, print_operand_bitnum):
2709         Remove private tables and use tic80_value_to_symbol function.
2710
2711 end-sanitize-tic80
2712 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2713
2714         * d10v-dis.c (print_operand): Change address printing
2715         to correctly handle PC wrapping.  Fixes PR11490.
2716
2717 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2718
2719         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2720         branches relaxable.
2721
2722 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2723
2724         * mips-dis.c (print_insn_mips16): Set insn_info information.
2725         (print_mips16_insn_arg): Likewise.
2726
2727         * mips-dis.c (print_insn_mips16): Better handling of an extend
2728         opcode followed by an instruction which can not be extended.
2729
2730 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2731
2732         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2733         coldfire moveb instruction to not allow an address register as
2734         destination.  Although the documentation does not indicate that
2735         this is invalid, experiments uncovered unexpected behavior.
2736         Added a comment explaining the situation.  Thanks to Andreas
2737         Schwab for pointing this out to me.
2738
2739 start-sanitize-tic80
2740 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2741
2742         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2743         entries are presorted so that entries with the same mnemonic are
2744         adjacent to each other in the table.  Sort the entries for each
2745         instruction so that this is true.
2746
2747 end-sanitize-tic80
2748 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2749
2750         * m68k-dis.c: Include <libiberty.h>.
2751         (print_insn_m68k): Sort the opcode table on the most significant
2752         nibble of the opcode.
2753
2754 start-sanitize-tic80
2755 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2756
2757         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2758         "vsub", "vst", "xnor", and "xor" instructions.
2759         (V_a1): Renamed from V_a, msb of accumulator reg number.
2760         (V_a0): Add macro, lsb of accumulator reg number.
2761
2762 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2763
2764         * tic80-dis.c (print_insn_tic80): Broke excessively long
2765         function up into several smaller ones and arranged for
2766         the instruction printing function to be callable recursively
2767         to print vector instructions that have both a load and a
2768         math instruction packed into a single opcode.
2769         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2770         to explain why it comes after the other vector opcodes.
2771
2772 end-sanitize-tic80
2773 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2774
2775         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2776         move insns to handle immediate operands.
2777
2778 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2779
2780         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2781         fix operand mask in the "moveml" entries for the coldfire.
2782
2783 start-sanitize-tic80
2784 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2785
2786         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2787         New macros for building vector instruction opcodes.
2788         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2789         FMT_LI, which were unused.  The field is now a flags field.
2790         Remove some opcodes that are possible, but illegal, such
2791         as long immediate instructions with doubles for immediate
2792         values.  Add "vadd" and "vld" instructions.
2793
2794 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2795
2796         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2797         the order more logical.  Move the shift alias instructions ("rotl",
2798         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2799         interspersed with the regular sr.x and sl.x instructions.  Add
2800         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2801         "sub", "subu", "swcr", and "trap".
2802
2803 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2804
2805         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2806         (OFF_SL_PC): Renamed from OFF_SL.
2807         (OFF_SS_BR): New operand type for base relative operand.
2808         (OFF_SL_BR): New operand type for base relative operand.
2809         (REG_BASE): New operand type for base register operand.
2810         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2811         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2812         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2813         instructions.
2814         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2815         10 char field, padded with spaces on rhs, rather than a string
2816         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2817         than old TIC80_OPERAND_RELATIVE.  Add support for new
2818         TIC80_OPERAND_BASEREL flag bit.
2819
2820 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2821
2822         * tic80-dis.c (print_insn_tic80): Print floating point operands
2823         as floats.
2824         * tic80-opc.c (SPFI): Add single precision floating point
2825         immediate operand type.
2826         (ROTATE): Add rotate operand type for shifts.
2827         (ENDMASK): Add for shifts.
2828         (n): Macro for the 'n' bit.
2829         (i): Macro for the 'i' bit.
2830         (PD): Macro for the 'PD' field.
2831         (P2): Macro for the 'P2' field.
2832         (P1): Macro for the 'P1' field.
2833         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2834         "fcmp", and "fdiv".
2835
2836 end-sanitize-tic80
2837 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2838
2839         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2840         adding in current address for pc-relative operands.
2841
2842 start-sanitize-tic80
2843 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2844
2845         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2846         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2847         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2848         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2849         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2850         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2851         (REG_SCALED, LSI_SCALED): New operand types.
2852         (E): New macro for 'E' bit at bit 27.
2853         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2854         opcodes, including the various size flavors (b,h,w,d) for
2855         the direct load and store instructions.
2856
2857 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2858
2859         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2860         in an instruction.
2861         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2862         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2863         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2864         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2865         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2866         masks with "MASK_* & ~M_*" to get the M bit reset.
2867         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2868
2869 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2870
2871         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2872         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2873         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2874         form.
2875         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2876         CC, SICR, and LICR table entries.
2877         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2878         "bcnd", and "brcr" opcodes.
2879
2880 end-sanitize-tic80
2881 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2882
2883         * ppc-opc.c (powerpc_operands): Make comment match the
2884         actual fields (no shift field).
2885         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2886 start-sanitize-tic80
2887         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2888         partial implementation, work in progress.
2889         * tic80-opc.c (tic80_operands): Begin construction operands table.
2890         (tic80_opcodes): Continue populating opcodes table and start
2891         filling in the operand indices.
2892         (tic80_num_opcodes): Add this.
2893 end-sanitize-tic80
2894
2895 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2896
2897         * m68k-opc.c: Add #B case for moveq.
2898
2899 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2900
2901         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2902         before they are used.
2903
2904 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2905
2906         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2907         for "breakpoint" instruction.
2908
2909 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2910
2911         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2912         (dep): Use ALL_CFLAGS rather than CFLAGS.
2913
2914 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2915
2916         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2917         flag.
2918
2919 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2920
2921         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2922 start-sanitize-tic80
2923         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2924 end-sanitize-tic80
2925
2926 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2927
2928         * mips16-opc.c: Add "abs".
2929
2930 start-sanitize-tic80
2931 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2932
2933         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2934         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2935         (disassembler): Add bfd_arch_tic80 support to set disassemble
2936         to print_insn_tic80.
2937         * tic80-dis.c (print_insn_tic80): Add stub.
2938
2939 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2940
2941         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2942         * configure: Regenerate with autoconf.
2943         * tic80-dis.c: Add file.
2944         * tic80-opc.c: Add file.
2945
2946 end-sanitize-tic80
2947 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2948
2949         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2950
2951 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2952
2953         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2954         (mn10200_opcodes): Use it for some logicals and btst insns.
2955         Add "break" and "trap" instructions.
2956
2957         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2958
2959         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2960
2961 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2962
2963         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2964         relative load or add now depends upon whether the instruction is
2965         in a delay slot.
2966
2967 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2968
2969         * mn10200-dis.c: Finish writing disassembler.
2970         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2971         Fix mask for "jmp (an)".
2972
2973         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2974         handle endianness issues for mn10300.
2975
2976         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2977
2978 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2979
2980         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2981         instruction.  Fix opcode field for "movb (imm24),dn".
2982
2983         * mn10200-opc.c (mn10200_operands): Fix insertion position
2984         for DI operand.
2985
2986 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2987
2988         * mn10200-opc.c: Create mn10200 opcode table.
2989         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2990         but moving along nicely.
2991
2992 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2993
2994         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
2995
2996 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
2997
2998         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2999         specifiers for fmovem* instructions.
3000
3001 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3002
3003         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3004
3005 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
3006
3007         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3008         with dsrl.
3009
3010 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3011
3012         * mn10300-opc.c: Add some comments explaining the various
3013         operands and such.
3014
3015         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3016
3017 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3018
3019         * m68k-dis.c (print_insn_arg): Handle new < and > operand
3020         specifiers.
3021
3022         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3023         operand specifiers in fmovm* instructions.
3024
3025 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
3026
3027         * ppc-opc.c (insert_li): Give an error if the offset has the two
3028         least significant bits set.
3029
3030 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3031
3032         * mips-dis.c (print_insn_mips16): Separate the instruction from
3033         the arguments with a tab, not a space.
3034
3035 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
3036
3037         * mn10300-dis.c (disasemble): Finish conversion to '$' as
3038         register prefix.
3039
3040         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3041         mov am,(imm32,sp).
3042
3043 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
3044
3045         * configure: Rebuild with autoconf 2.12.
3046
3047         Add support for mips16 (16 bit MIPS implementation):
3048         * mips16-opc.c: New file.
3049         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3050         (mips16_reg_names): New static array.
3051         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3052         after seeing a 16 bit symbol.
3053         (print_insn_little_mips): Likewise.
3054         (print_insn_mips16): New static function.
3055         (print_mips16_insn_arg): New static function.
3056         * mips-opc.c: Add jalx instruction.
3057         * Makefile.in (mips16-opc.o): New target.
3058         * configure.in: Use mips16-opc.o for bfd_mips_arch.
3059         * configure: Rebuild.
3060
3061 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
3062
3063         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3064         operand specifiers in *save, *restore and movem* instructions.
3065
3066         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3067         the coldfire.
3068
3069         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3070         register operands for immediate arithmetic, not, neg, negx, and
3071         set according to condition instructions.
3072
3073         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3074         specifier of the effective-address operand in immediate forms of
3075         arithmetic instructions.  The specifier for the immediate operand
3076         notes how and where the constant will be stored.
3077
3078 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
3079
3080         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3081         opcode.
3082
3083         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3084         register prefix.
3085
3086         * mn10300-dis.c (disassemble): Prefix registers with '%'.
3087
3088 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
3089
3090         * mn10300-dis.c (disassemble): Handle register lists.
3091
3092         * mn10300-opc.c: Fix handling of register list operand for
3093         "call", "ret", and "rets" instructions.
3094
3095         * mn10300-dis.c (disassemble): Print PC-relative and memory
3096         addresses symbolically if possible.
3097         * mn10300-opc.c: Distinguish between absolute memory addresses,
3098         pc-relative offsets & random immediates.
3099
3100         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3101         in 7 byte insns.
3102         (disassemble): Handle SPLIT and EXTENDED operands.
3103
3104 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
3105
3106         * mn10300-dis.c: Rough cut at printing some operands.
3107
3108         * mn10300-dis.c: Start working on disassembler support.
3109         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3110
3111         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3112         list.
3113         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3114
3115 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3116
3117         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3118
3119 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
3120
3121         * mn10300-opc.c (mn10300_opcodes): Demand parens around
3122         register argument is calls and jmp instructions.
3123
3124 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
3125
3126         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3127         getx operand.  Fix opcode for mulqu imm,dn.
3128
3129 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
3130
3131         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3132         in MN10300_OPERAND_SPLIT operands for how many bits
3133         appear in the basic insn word.  Add IMM32_HIGH24,
3134         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3135         (mn10300_opcodes): Use new operands as needed.
3136
3137         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3138         for bset, bclr, btst instructions.
3139         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3140
3141         * mn10300-opc.c (mn10300_operands): Remove many redundant
3142         operands.  Update opcode table as appropriate.
3143         (IMM32): Add MN10300_OPERAND_SPLIT flag.
3144         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3145
3146 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
3147
3148         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3149         operands (for indexed load/stores).  Fix bitpos for DI
3150         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3151         few instructions that insert immediates/displacements in the
3152         middle of the instruction.  Add IMM8E for 8 bit immediate in
3153         the extended part of an instruction.
3154         (mn10300_operands): Use new opcodes as appropriate.
3155
3156 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3157
3158         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3159         sequential so the assembler never parallelizes it with
3160         other instructions.
3161
3162 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
3163
3164         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3165         a data/address register that appears in register field 0
3166         and register field 1.
3167         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3168
3169 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
3170
3171         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3172         standard disassembly.
3173
3174         * alpha-opc.c (alpha_operands): Rearrange flags slot.
3175         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3176         Recategorize PALcode instructions.
3177
3178 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
3179
3180         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3181
3182 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
3183
3184         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3185         there are no operand types.
3186
3187 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
3188
3189         * v850-opc.c (D9_RELAX): Renamed from D9, all references
3190         changed.
3191         (v850_operands): Make sure D22 immediately follows D9_RELAX.
3192
3193 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
3194
3195         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3196
3197 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
3198
3199         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3200         and sst.w instructions.
3201
3202         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3203         "bCC"instructions).
3204
3205 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3206
3207         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3208         and the arguments.
3209
3210 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
3211
3212         * ppc-opc.c (PPCPWR2): Define.
3213         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3214         it.
3215
3216 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
3217
3218         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3219         field for movhu instruction.
3220
3221         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3222         cast value to "long" not "signed long" to keep hpux10
3223         compiler quiet.
3224
3225 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
3226
3227         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3228         for mov (abs16),DN.
3229
3230         * mn10300-opc.c (FMT*): Remove definitions.
3231
3232         * mn10300-opc.c (mn10300_opcodes): Fix destination register
3233         for shift-by-register opcodes.
3234
3235         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3236         into [AD][MN][01] for encoding the position of the register
3237         in the opcode.
3238
3239 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
3240
3241         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3242         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3243
3244 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
3245
3246         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3247         Fix various typos.  Add "PAREN" operand.
3248         (MEM, MEM2): Define.
3249         (mn10300_opcodes): Surround all memory addresses with "PAREN"
3250         operands.  Fix several typos.
3251
3252         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3253         changes.
3254
3255 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
3256
3257         * mn10300-opc.c (FMT_XX): Renumber starting at one.
3258         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
3259         at this time.
3260         (mn10300_opcodes): Break opcode format out into its own field.
3261         Update many operand fields to deal with signed vs unsigned
3262         issues.  Fix one or two typos in the "mov" instruction
3263         opcode, mask and/or operand fields.
3264
3265 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3266
3267         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3268         m68851 wasn't reset.
3269
3270 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3271
3272         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3273         all opcodes.  Very rough cut at operands for all opcodes.
3274
3275         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3276         opcode table.
3277
3278 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
3279
3280         * mn10200-opc.c, mn10300-opc.c: New files.
3281         * mn10200-dis.c, mn10300-dis.c: New files.
3282         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3283         * disassemble.c: Break mn10x00 support into 10200 and 10300
3284         support.
3285         * configure.in: Likewise.
3286         * configure: Rebuilt.
3287
3288 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3289
3290         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3291
3292 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
3293
3294         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3295         MN10x00 processors.
3296         * disassemble (ARCH_mn10x00): Define.
3297         (disassembler): Handle bfd_arch_mn10x00.
3298         * configure.in: Recognize bfd_mn10x00_arch.
3299         * configure: Rebuilt.
3300
3301 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
3302
3303         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
3304         accordingly.  Don't declare functions using op_rtn.
3305
3306 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
3307
3308         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
3309         params to be more standard.
3310         * (disassemble):  Print absolute addresses and symbolic names for
3311         branch and jump targets.
3312         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
3313         bit operands.
3314         * (v850_opcodes):  Add breakpoint insn.
3315
3316 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3317
3318         * m68k-opc.c: Move the fmovemx data register cases before the
3319         other cases, so that they get recognized before the data register
3320         does gets treated as a degenerate register list.
3321
3322 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3323
3324         * mips-opc.c: Add a case for "div" and "divu" with two registers
3325         and a destination of $0.
3326
3327 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
3328
3329         * mips-dis.c (print_insn_arg): Add prototype.
3330         (_print_insn_mips): Ditto.
3331
3332 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3333
3334         * mips-dis.c (print_insn_arg): Print condition code registers as
3335         $fccN.
3336
3337 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
3338
3339         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3340
3341 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
3342
3343         * v850-dis.c (disassemble): Make static.  Provide prototype.
3344
3345 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3346
3347         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3348         in range checks.
3349
3350 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3351
3352         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3353         ']' characters into the output stream.
3354         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3355         Add "memop" field to all opcodes (for the disassembler).
3356         Reorder opcodes so that "nop" comes before "mov" and "jr"
3357         comes before "jarl".
3358
3359         * v850-dis.c (print_insn_v850): Fix typo in last change.
3360
3361         * v850-dis.c (print_insn_v850): Properly handle disassembling
3362         a two byte insn at the end of a memory region when the memory
3363         region's size is only two byte aligned.
3364
3365         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3366
3367         * v850-dis.c (v850_reg_names): Define.
3368         (v850_sreg_names, v850_cc_names): Likewise.
3369         (disassemble): Very rough cut at printing operands (unformatted).
3370
3371         * v850-opc.c (BOP_MASK): Fix.
3372         (v850_opcodes): Fix mask for jarl and jr.
3373
3374         * v850-dis.c: New file.  Skeleton for disassembler support.
3375         * Makefile.in Remove v850 references, they're not needed here.
3376         * configure.in: Add v850-dis.o when building v850 toolchains.
3377         * configure: Rebuilt.
3378         * disassemble.c (disassembler): Call v850 disassembler.
3379
3380         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3381         (insert_d8_6, extract_d8_6): New functions.
3382         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3383         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3384         Add D8_6.
3385         (IF4A, IF4B): Use "D7" instead of "D7S".
3386         (IF4C, IF4D): Use "D8_7" instead of "D8".
3387         (IF4E, IF4F): New.  Use "D8_6".
3388         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3389         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3390
3391         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3392         (v850_operands): Change D16 to D16_15, use special insert/extract
3393         routines.  New new D16 that uses the generic insert/extract code.
3394         (IF7A, IF7B): Use D16_15.
3395         (IF7C, IF7D): New.  Use D16.
3396         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3397
3398         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3399         message.  Issue an error if the branch offset is odd.
3400
3401         * v850-opc.c: Add notes about needing special insert/extract
3402         for all the load/store insns, except "ld.b" and "st.b".
3403
3404         * v850-opc.c (insert_d22, extract_d22): New functions.
3405         (v850_operands): Use insert_d22 and extract_d22 for
3406         D22 operands.
3407         (insert_d9): Fix range check.
3408
3409 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3410
3411         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3412         and set bits field to D9 and D22 operands.
3413
3414 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3415
3416         * v850-opc.c (v850_operands): Define SR2 operand.
3417         (v850_opcodes): "ldsr" uses R1,SR2.
3418
3419         * v850-opc.c (v850_opcodes): Fix opcode specs for
3420         sld.w, sst.b, sst.h, sst.w, and nop.
3421
3422 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3423
3424         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3425         end of the opcode table.
3426
3427 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3428
3429         * d10v-opc.c (pre_defined_registers): Added register pairs,
3430         "r0-r1", "r2-r3", etc.
3431
3432 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3433
3434         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3435         Create I16U for an unsigned 16bit mmediate operand.
3436         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3437
3438         * v850-opc.c (v850_operands): Define EP operand.
3439         (IF4A, IF4B, IF4C, IF4D): Use EP.
3440
3441         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3442         with immediate operand, "movhi".  Tweak "ldsr".
3443
3444         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3445         correct.  Get sld.[bhw] and sst.[bhw] closer.
3446
3447         * v850-opc.c (v850_operands): "not" is a two byte insn
3448
3449         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3450
3451         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3452
3453         * v850-opc.c (two): Get order of words correct.
3454
3455         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3456
3457         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3458         register source and destination operands.
3459         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3460
3461         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3462         same thinko in "trap" opcode.
3463
3464         * v850-opc.c (v850_opcodes): Add initializer for size field
3465         on all opcodes.
3466
3467         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3468         Add D8 for 8-bit unsigned field in short load/store insns.
3469         (IF4A, IF4D): These both need two registers.
3470         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3471         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3472         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3473         for "ldsr" and "stsr".
3474         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3475         is unsigned.
3476
3477         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3478         short store word (sst.w).
3479
3480 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3481
3482         * v850-opc.c (v850_operands): Added insert and extract fields,
3483         pointers to functions that handle unusual operand encodings.
3484
3485 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3486
3487         * v850-opc.c (v850_opcodes): Enable "trap".
3488
3489         * v850-opc.c (v850_opcodes): Fix order of displacement
3490         and register for "set1", "clr1", "not1", and "tst1".
3491
3492 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3493
3494         * v850-opc.c (v850_operands): Add "B3" support.
3495         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3496         and "tst1".
3497
3498         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3499
3500         * v850-opc.c: Close unterminated comment.
3501
3502 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3503
3504         * v850-opc.c (v850_operands): Add flags field.
3505         (v850_opcodes): add move opcodes.
3506
3507 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3508
3509         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3510         * configure: (bfd_v850v_arch) Add new case.
3511         * configure.in: (bfd_v850_arch) Add new case.
3512         * v850-opc.c: New file.
3513
3514 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3515
3516         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3517
3518 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3519
3520         * d10v-opc.c: Add additional information to the opcode
3521         table to help determinine which instructions can be done
3522         in parallel.
3523
3524 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3525
3526         * mpw-make.sed: Update editing of include pathnames to be
3527         more general.
3528
3529 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3530
3531         * arm-opc.h: Added "bx" instruction definition.
3532
3533 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3534
3535         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3536
3537 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3538
3539         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3540
3541 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3542
3543         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3544
3545 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3546
3547         * makefile.vms: Update for alpha-opc changes.
3548
3549 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3550
3551         * i386-dis.c (print_insn_i386): Actually return the correct value.
3552         (ONE, OP_ONE): #ifdef out; not used.
3553
3554 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3555
3556         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3557         Changed subi operand type to treat 0 as 16.
3558
3559 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3560
3561         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3562         <rose@netcom.com>.
3563
3564 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3565
3566         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3567         memory transfer instructions. Add new format string entries %h and %s.
3568         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3569         formats %h and %s.
3570
3571 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3572
3573         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3574         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3575
3576 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3577
3578         * alpha-dis.c (print_insn_alpha_osf): Remove.
3579         (print_insn_alpha_vms): Remove.
3580         (print_insn_alpha): Make globally visible.  Chose the register
3581         names based on info->flavour.
3582         * disassemble.c: Always return print_insn_alpha for the alpha.
3583
3584 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3585
3586         * d10v-dis.c (dis_long): Handle unknown opcodes.
3587
3588 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3589
3590         * d10v-opc.c: Changes to support signed and unsigned numbers.
3591         All instructions with the same name that have long and short forms
3592         now end in ".l" or ".s".  Divs added.
3593         * d10v-dis.c: Changes to support signed and unsigned numbers.
3594
3595 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3596
3597         * d10v-dis.c: Change all functions to use info->print_address_func.
3598
3599 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3600
3601         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3602         move ccr/sr insns more strict so that the disassembler only
3603         selects them when the addressing mode is data register.
3604
3605 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3606         * d10v-opc.c (pre_defined_registers):  Declare.
3607         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3608         to pick a better name for the registers.
3609
3610 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3611
3612         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3613         operands for fexpand and fpmerge.  From Christian Kuehnke
3614         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3615
3616 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3617
3618         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3619         print routine.  Take new regnames and cpumask arguments.
3620         Kill the environment variable nonsense.
3621         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3622         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3623         * disassemble.c (disassembler): Test bfd flavour to pick
3624         between OSF and VMS routines.  Default to OSF.
3625
3626 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3627
3628         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3629         * configure: Rebuild.
3630         * Makefile.in (install): Use @INSTALL_SHLIB@.
3631
3632 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3633
3634         * configure: (bfd_d10v_arch) Add new case.
3635         * configure.in: (bfd_d10v_arch) Add new case.
3636         * d10v-dis.c: New file.
3637         * d10v-opc.c: New file.
3638         * disassemble.c (disassembler) Add entry for d10v.
3639
3640 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3641
3642         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3643         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3644
3645 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3646
3647         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3648         distinguish between variants of the instruction set.
3649         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3650         distinguish between variants of the instruction set.
3651
3652 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3653
3654         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3655         the 8086 instruction set.
3656         * i386-dis.c:  General cleanups.  Make most things static.  Add
3657         prototypes.  Get rid of static variables aflags and dflags.  Pass
3658         them as args (to almost everything).
3659
3660 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3661
3662         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3663
3664         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3665
3666         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3667         if the next arg is marked with SRC_IN_DST.  Gross.
3668
3669         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3670         we're looking for and find EXR.
3671
3672         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3673         if we're looking for KBIT and we don't find it.
3674
3675         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3676         for L_3 and L_2.
3677
3678         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3679         3bit immediate operands.
3680
3681 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3682
3683         * Released binutils 2.7.
3684
3685         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3686         <kkaempf@progis.ac-net.de>.
3687
3688 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3689
3690         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3691
3692 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3693
3694         * sparc-dis.c (print_insn_sparclite):  New routine to print
3695         sparclite instructions.
3696
3697 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3698
3699         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3700
3701 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3702
3703         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3704         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3705         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3706
3707 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3708
3709         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3710         Use autoconf-set values.
3711         (docdir, oldincludedir): Removed.
3712         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3713
3714 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3715
3716         * alpha-opc.c: New file.
3717         * alpha-opc.h: Remove.
3718         * alpha-dis.c: Complete rewrite to use new opcode table.
3719         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3720         * configure: Rebuild with autoconf 2.10.
3721         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3722         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3723         alpha-opc.h.
3724         (alpha-opc.o): New target.
3725
3726 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3727
3728         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3729         Set imm_added_to_rs1 even if the source and destination register
3730         are not the same.
3731
3732         * sparc-opc.c: Add some two operand forms of the wr instruction.
3733
3734 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3735
3736         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3737         to just "mode".
3738
3739         * disassemble.c (disassembler): Handle H8/S.
3740         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3741
3742 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3743
3744         * sparc-opc.c: Add beq/teq as aliases for be/te.
3745
3746         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3747         <sergei@msil.sps.mot.com>.
3748
3749 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3750
3751         * makefile.vms: New file.
3752
3753         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3754
3755 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3756
3757         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3758         regardless of plen.
3759
3760 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3761
3762         * i386-dis.c (OP_OFF): Call append_prefix.
3763
3764 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3765
3766         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3767         unsigned long to silence a warning from the Solaris PowerPC
3768         compiler.
3769
3770 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3771
3772         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3773
3774 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3775
3776         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3777         (X_IMM13): Delete.
3778         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3779         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3780         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3781         cpush, cpusha, cpull sparclet insns.
3782
3783 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3784
3785         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3786
3787 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3788
3789         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3790         Set F_FLOAT on other floating point instructions.
3791
3792 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3793
3794         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3795         registers.
3796         (powerpc_opcodes): Add 860/821 specific SPRs.
3797
3798 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3799
3800         * configure.in: Permit --enable-shared to specify a list of
3801         directories.  Set and substitute BFD_PICLIST.
3802         * configure: Rebuild.
3803         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3804         uses.  Set to @BFD_PICLIST@.
3805
3806 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3807
3808         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3809         not "abs", which may be needed for the absolute in something
3810         like btst #0,@10:8.  Print L_3 immediates separately from other
3811         immediates.  Change ABSMOV reference to ABS8MEM.
3812
3813 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3814
3815         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3816         (current_arch_mask): New static global.
3817         (compute_arch_mask): New static function.
3818         (print_insn_sparc): Delete sparc_v9_p.  New static local
3819         current_mach.  Resort opcode table if current_mach changes.
3820         Generalize "insn not supported" test.
3821         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3822         Delete test for v9/!v9.
3823         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3824         (v6notlet): Define.
3825         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3826         (brfcx): Renamed to FBRX.
3827         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3828         coprocessor mnemonics are not supported on the sparclet).
3829         (condf): Renamed to CONDF.
3830         (SLCBCC2): Delete F_ALIAS flag.
3831
3832 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3833
3834         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3835         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3836
3837 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3838
3839         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3840         that the shared library version number is set correctly.
3841
3842 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3843
3844         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3845         Miles Bader <miles@gnu.ai.mit.edu>.
3846         * configure: Rebuild.
3847
3848 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3849
3850         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3851         malloc.
3852
3853 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3854
3855         * configure: Rebuild with autoconf 2.8.
3856
3857 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3858
3859         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3860         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3861
3862 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3863
3864         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3865         since they appear as targets in Makefile.in.
3866         * configure: Rebuild.
3867
3868 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3869
3870         * mpw-make.sed: Edit out shared library support bits.
3871
3872 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3873
3874         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3875         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3876         (sparc_opcodes): Add sparclet insns.
3877         (sparclet_cpreg_table): New static local.
3878         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3879         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3880
3881 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3882
3883         * i386-dis.c (index16): New static variable.
3884         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3885         other way around.
3886         (OP_indirE): Return result of OP_E.
3887         (OP_E): Check for 16 bit addressing mode, and disassemble
3888         correctly.  Optimised 32 bit case a little.  Don't print
3889         "(base,index,scale)" when sib specifies only an offset.
3890
3891 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3892
3893         * configure.in: Set and substitute SHLIB_DEP.
3894         * configure: Rebuild.
3895         * Makefile.in (SHLIB_DEP): New variable.
3896         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3897         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3898         COMMON_SHLIB, add them to piclist with appropriate modifications.
3899         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3900         here: just use piclist.
3901
3902 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3903
3904         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3905         (print_insn_sparc): Rewrite v9/not-v9 tests.
3906         (compare_opcodes): Likewise.
3907         * sparc-opc.c (MASK_<ARCH>): Define.
3908         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3909         (sparclet,v6notv9): Define.
3910         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3911         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3912
3913 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3914
3915         * configure.in: Call AC_PROG_CC before configure.host.
3916         * configure: Rebuild.
3917
3918         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3919
3920 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3921
3922         * i386-dis.c (onebyte_has_modrm): New static array.
3923         (twobyte_has_modrm): New static array.
3924         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3925
3926 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3927
3928         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3929         $(SHLINK).
3930
3931 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3932
3933         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3934         doesn't conflict.
3935
3936 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3937
3938         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3939         m68010up, not just m68020up | cpu32.
3940
3941         * Makefile.in (SONAME): New variable.
3942         ($(SHLINK)): Make a link to the transformed name, as well.
3943         (stamp-tshlink): New target.
3944         (install): Skip stamp-tshlink during install.
3945
3946 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3947
3948         * configure.in: Call AC_ARG_PROGRAM.
3949         * configure: Rebuild.
3950         * Makefile.in (program_transform_name): New variable.
3951         (install): Transform library name before installing it.
3952
3953 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3954
3955         * i960-dis.c (mem): Add HX dcinva instruction.
3956
3957         Support for building as a shared library, based on patches from
3958         Alan Modra <alan@spri.levels.unisa.edu.au>:
3959         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3960         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3961         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3962         * configure: Rebuild.
3963         * Makefile.in (ALLLIBS): New variable.
3964         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3965         (COMMON_SHLIB, SHLINK): New variables.
3966         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3967         (STAGESTUFF): Remove variable.
3968         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3969         (stamp-piclist, piclist): New targets.
3970         ($(SHLIB), $(SHLINK)): New targets.
3971         ($(OFILES)): Depend upon stamp-picdir.
3972         (disassemble.o): Build twice if PICFLAG is set.
3973         (MOSTLYCLEAN): Add pic/*.o.
3974         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3975         (distclean): Remove pic and stamp-picdir.
3976         (install): Install shared libraries.
3977         (stamp-picdir): New target.
3978
3979 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3980
3981         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3982         Print unknown instruction as "unknown", rather than in hex.
3983
3984 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3985
3986         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3987
3988 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3989
3990         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3991
3992 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
3993
3994         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3995         when necessary.  From Ulrich Drepper
3996         <drepper@myware.rz.uni-karlsruhe.de>.
3997
3998 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3999
4000         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4001         sparc_num_opcodes.  Update architecture enum values.
4002         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4003         (sparc_opcode_lookup_arch): New function.
4004         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4005         (sparc_opcodes): Add v9a shutdown insn.
4006
4007 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
4008
4009         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4010         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
4011         architecture.
4012         (print_insn_sparc64): Deleted.
4013         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4014         print_insn_sparc.
4015
4016         * sparc-opc.c (architecture_pname): Add v9a.
4017
4018 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
4019
4020         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4021         incorrectly defined as 0x16 when it should be 0x15.
4022         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4023         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
4024         excb (exception barrier) which is defined in the Alpha
4025         Architecture Handbook version 2.
4026         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4027         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
4028         disassembled as or, for example.
4029
4030 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
4031
4032         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4033         (_print_insn_mips): Change i from int to unsigned int.
4034
4035 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
4036
4037         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4038         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
4039
4040 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
4041
4042         * i386-dis.c: Added Pentium Pro instructions.
4043
4044 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4045
4046         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4047         being for Power2.
4048
4049 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4050
4051         * sh-opc.h (sh_nibble_type): Added REG_B.
4052         (sh_arg_type): Added A_REG_B.
4053         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4054         and stc.l opcodes.
4055         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4056
4057 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4058
4059         * disassemble.c (disassembler): Use new bfd_big_endian macro.
4060
4061 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4062
4063         * Makefile.in (distclean): Remove stamp-h.  From Ronald
4064         F. Guilmette <rfg@monkeys.com>.
4065
4066 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
4067
4068         From David Mosberger-Tang  <davidm@azstarnet.com>:
4069         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4070         instruction.
4071
4072 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4073
4074         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4075         (sh_table): Added many SH3 opcodes.
4076         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4077
4078 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4079
4080         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4081         (subco,subco.): Mark this PPC, not PPCCOM.
4082
4083 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
4084
4085         * configure: Rebuild with autoconf 2.7.
4086
4087 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4088
4089         * configure: Rebuild with autoconf 2.6.
4090
4091 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
4092
4093         * configure.in: Sort list of architectures.  Accept but do nothing
4094         for alliant, convex, pyramid, romp, and tahoe.
4095
4096 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
4097
4098         * a29k-dis.c (print_special): Change num to unsigned int.
4099
4100 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
4101
4102         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4103         shifting it.
4104
4105 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4106
4107         * configure.in: Call AC_CHECK_PROG to find and cache AR.
4108         * configure: Rebuilt.
4109
4110 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
4111
4112         * configure.in: Add case for bfd_i860_arch.
4113         * configure: Rebuild.
4114
4115 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4116
4117         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4118         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4119         (NEXTDOUBLE): Likewise.
4120         (print_insn_m68k): Don't match fmoveml if there is more than one
4121         register in the list.
4122         (print_insn_arg): Handle a place of '8' for a type of 'L'.
4123
4124 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4125
4126         * m68k-opc.c: Use #W rather than #w.
4127         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4128
4129 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4130
4131         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4132         and likewise for all the dbxx opcodes.
4133
4134 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
4135
4136         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4137
4138 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
4139
4140         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4141         the VR4100 specific instructions to the mips_opcodes structure.
4142
4143 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
4144
4145         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4146         ugly Metrowerks bug in CW6, is fixed in CW7.
4147
4148 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4149
4150         * ppc-opc.c (whole file): Add flags for common/any support.
4151
4152 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
4153
4154         * Makefile.in (BISON): Remove macro.
4155         (FLAGS_TO_PASS): Remove BISON.
4156
4157 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
4158
4159         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
4160
4161         * m68k-dis.c (print_insn_m68k): Recognize all two-word
4162         instructions that take no args by looking at the match mask.
4163         (print_insn_arg): Always print "%" before register names.
4164         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4165         [case '_']: Don't print "@#" before address.
4166         [case 'J']: Use "%s" as format string, not register name.
4167         [case 'B']: Treat place == 'C' like 'l' and 'L'.
4168
4169 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
4170
4171         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4172         name correctly.
4173
4174 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
4175
4176         From David Mosberger-Tang  <davidm@azstarnet.com>
4177
4178         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4179         (alpha_insn_set): added definitions for VAX floating point
4180         instructions (Unix compilers don't generate these, but handcoded
4181         assembly might still use them).
4182
4183         * alpha-dis.c (print_insn_alpha): added support for disassembling
4184         the miscellaneous instructions in the Alpha instruction set.
4185
4186 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
4187
4188         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4189         no longer create sysdep.h, sed ppc-opc.c to work around a
4190         serious Metrowerks C bug.
4191         * mpw-make.in: Remove.
4192         * mpw-make.sed: New file, used by mpw-configure to edit
4193         Makefile.in into an MPW makefile.
4194
4195 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
4196
4197         * Makefile.in (maintainer-clean): New synonym for realclean.
4198
4199 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4200
4201         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4202         which use '0', '1', and '2' instead.  Specify the proper size for
4203         a pmove immediate operand.  Correct the pmovefd patterns to be
4204         moves to a register, not from a register.
4205         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4206
4207 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
4208
4209         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4210         %psr, %wim, %tbr as F_NOTV9.
4211
4212 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
4213
4214         * Makefile.in (Makefile): Just rebuild Makefile when running
4215         config.status.
4216         (config.h, stamp-h): New targets.
4217         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4218         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
4219         rebuilding config.h.
4220         * configure: Rebuild.
4221
4222         * mips-opc.c: Change unaligned loads and stores with "t,A"
4223         operands to use "t,A(b)".
4224
4225 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4226
4227         * sh-dis.c (print_insn_shx): Add F_FR0 support.
4228
4229 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4230
4231         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4232         until 3 instead of until 2.
4233
4234 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4235
4236         * Makefile.in (ALL_CFLAGS): Define.
4237         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4238         (MOSTLYCLEAN): Add config.log.
4239         (distclean): Don't remove config.log.
4240         * configure.in: Substitute HDEFINES.
4241         * configure: Rebuild.
4242
4243 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4244
4245         * sh-opc.h (sh_arg_type): Add F_FR0.
4246         (sh_table, case fmac): Add F_FR0 as first argument.
4247
4248 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4249
4250         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4251
4252 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
4253
4254         * sparc-dis.c: Remove all references to NO_V9.
4255
4256 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
4257
4258         * aclocal.m4: Just include ../bfd/aclocal.m4.
4259         * configure: Rebuild.
4260
4261 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
4262
4263         * sparc-dis.c (X_DISP19): Define.
4264         (print_insn, case 'G'): Use it.
4265         (print_insn, case 'L'): Sign extend displacement.
4266
4267 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
4268
4269         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4270         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
4271         host_makefile_frag or frags.
4272         * aclocal.m4: New file.
4273         * configure: Rebuild.
4274         * Makefile.in (INSTALL): Set to @INSTALL@.
4275         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4276         (INSTALL_DATA): Set to @INSTALL_DATA@.
4277         (AR): Set to @AR@.
4278         (AR_FLAGS): Set to rc rather than qc.
4279         (CC): Define as @CC@.
4280         (CFLAGS): Set to @CFLAGS@.
4281         (@host_makefile_frag@): Remove.
4282         (config.status): Remove dependency upon @frags@.
4283
4284         * configure.in: ../bfd/config.bfd now just sets shell variables.
4285         Use them rather than looking through target Makefile fragments.
4286         * configure: Rebuild.
4287
4288 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4289
4290         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4291
4292 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
4293
4294         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4295         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4296         sparc64 insns.
4297
4298         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4299         (lookup_{name,value}): New functions.
4300         (prefetch_table): New static local.
4301         (sparc_{encode,decode}_prefetch): New functions.
4302         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4303
4304 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4305
4306         * sh-opc.h: Add blank lines to improve readabililty of sh3e
4307         instructions.
4308
4309 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4310
4311         * sh-dis.c: Correct comment on first line of file.
4312
4313 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
4314
4315         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4316
4317         * sparc-opc.c (asi, membar): New static locals.
4318         (sparc_{encode,decode}_{asi,membar}): New functions.
4319         (sparc_opcodes, membar insn): Fix.
4320         * sparc-dis.c (print_insn): Call sparc_decode_asi.
4321         Support decoding of membar masks.
4322         (X_MEMBAR): Define.
4323
4324 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
4325
4326         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4327
4328 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4329
4330         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4331         and likewise for the other branches.  Add bhs as an alias for bcc,
4332         and likewise for the size variants.  Add dbhs as an alias for
4333         dbcc.
4334
4335 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
4336
4337         * sh-opc.h (FP sts instructions): Update to match reality.
4338
4339 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
4340
4341         * m68k-dis.c: (fpcr_names): Add % before all register names.
4342         (reg_names): Likewise.
4343         (print_insn_arg): Don't explicitly print % before register names.
4344         Add % before register names in static array names.  In case 'r',
4345         print data registers as `@(Dn)', not `Dn@'.  When printing a
4346         memory address, don't print @# before it.
4347         (print_indexed): Change base_disp and outer_disp from int to
4348         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4349         syntax.  Sign extend 8 byte displacement correctly.
4350         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4351         Change parameter disp from int to bfd_vma.
4352
4353         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4354         for jsr.
4355
4356 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4357
4358         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4359         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4360         * sh-opc.h (sh_arg_type): Add new operand types.
4361         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4362
4363 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4364
4365         * Makefile.in (distclean): Remove generated file config.h.
4366
4367 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4368
4369         * Makefile.in (distclean): Remove generated file config.h.
4370
4371 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4372
4373         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4374         Clean up tables.
4375         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4376         (opcode): Remove.
4377         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4378         rather than numopcodes.  Use m68k_opcodes rather than removed
4379         opcode function.  Don't check F_ALIAS.
4380         (print_insn_arg): Change first parameter to be const char *.
4381         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4382         (m68k-opc.o): New target.
4383         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4384         * configure: Rebuild.
4385
4386 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4387
4388         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4389         (opcode_bits, opcode_hash_table): New variables.
4390         (opcodes_initialized): Renamed from opcodes_sorted.
4391         (build_hash_table): New function.
4392         (is_delayed_branch): Use hash table.
4393         (print_insn): Renamed from print_insn_sparc, made static.
4394         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4395         and vice-versa if sparc64.
4396         (print_insn_sparc, print_insn_sparc64): New functions.
4397         (compare_opcodes): Move sparc64 opcodes to end.
4398         Print commutative insns with constant second.
4399         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4400
4401 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4402
4403         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4404         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4405         avoids printing a delay slot in a delay slot.
4406         * sh-opc.h (sh_table): Fully bracket last entry.
4407
4408 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4409
4410         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4411
4412 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4413
4414         * configure.in: Get host_makefile_frag from ${srcdir}.
4415
4416         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4417         config.h from config.in.  Don't set up sysdep.h link.
4418         * sysdep.h: New file.
4419         * configure, config.in: New files, generated from configure.in.
4420         * Makefile.in: Updated to be processed autoconf-style.
4421         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4422         (Makefile): Depend on config.status.
4423         (config.status): New rule.
4424         * configure.bat: Update Makefile substitutions.
4425
4426 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4427
4428         * mips-opc.c (L1): Define.
4429         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4430         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4431         and wb.
4432
4433 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4434
4435         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4436         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4437         have multiple add units but only a single logical unit.
4438
4439         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4440         shifted by 18, without any insertion or extraction function.
4441         (insert_cr, extract_cr): Remove.
4442
4443 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4444
4445         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4446         register names.
4447
4448 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4449
4450         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4451         * sh-opc.h: Add copyright.
4452
4453 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4454
4455         * Makefile.in (crunch-m68k): Delete extra target accidentally
4456         checked in a while ago.
4457
4458 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4459
4460         * sh-opc.h (sh_table): Add SH3 support.
4461
4462 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4463
4464         * sh-opc.h: Added bsrf and braf.
4465
4466 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4467
4468         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4469         bogus [ls]fm{ea,fd} patterns.
4470
4471         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4472         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4473         initialize it from memory.  Make function static.
4474         (print_insn_{big,little}_arm): New functions.
4475         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4476         the correct endianness.
4477
4478 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4479
4480         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4481         enum list.
4482
4483 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4484
4485         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4486         17th, so that it builds again using GCC as the compiler.
4487
4488 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4489
4490         * mips-dis.c (print_insn_little_mips): Cast return value from
4491         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4492         expects an unsigned long, and that might be fewer words of
4493         argument storage (e.g., if bfd_vma is long long on a 32-bit
4494         machine).
4495         (print_insn_big_mips): Likewise with bfd_getb32 value.
4496         (_print_insn_mips): Now static.
4497
4498 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4499
4500         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4501         gcc memory hog problem with initializer is fixed.
4502
4503 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4504
4505         Merge in support for Mac MPW as a host.
4506         (Old change descriptions retained for informational value.)
4507
4508         * mpw-config.in (archname): Compute from the config.
4509         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4510
4511         * mpw-config.in (target_arch): Compute from canonical target.
4512         (m68k, mips, powerpc, sparc): Add architectures.
4513         * mpw-make.in (disassemble.c.o): Add.
4514         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4515
4516         * mpw-config.in (BFD_MACHINES): Set to a default value.
4517         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4518
4519         * mpw-make.in (CSEARCH): Add extra-include to search path.
4520
4521         * mpw-config.in (varargs.h): Don't create.
4522         (sysdep.h): Create using forward-include.
4523         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4524
4525         * mpw-config.in: New file, MPW version of configure.in.
4526         * mpw-make.in: New file, MPW version of Makefile.in.
4527
4528 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4529
4530         * alpha-dis.c (print_insn_alpha): Put empty statement after
4531         default label.
4532
4533 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4534
4535         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4536         (low_sign_extend): Likewise.
4537         (get_field): Delete unused function.
4538         (set_field, deposit_14, deposit_21): Likewise.
4539
4540 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4541
4542         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4543           (guy@netapp.com).
4544
4545 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4546
4547         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4548
4549         * alpha-opc.h (OSF_ASMCODE): define
4550         print pal-code names as defined in App C of the
4551         Alpha Architecture Reference Manual
4552
4553         * alpha-dis.c: cleaned up output
4554         print stylized code forms as defined in App A.4.3 of the
4555         Alpha Architecture Reference Manual
4556
4557 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4558
4559         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4560         `rfe'.
4561         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4562         'N', and 'M'.
4563
4564 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4565
4566         * m68k-dis.c (opcode): New function.  Returns address of opcode
4567         table entry given index, even if the opcode table was split to
4568         work around gcc bugs.
4569         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4570         directly.
4571         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4572         (reg_names): Now const.
4573         (print_insn_arg): Arrays cacheFieldName and names now const.
4574         (print_indexed): Array scales now const.
4575
4576 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4577
4578         * ppc-opc.c: Sort recently added instructions by minor opcode
4579         number within major opcode number.
4580
4581 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4582
4583         * hppa-dis.c: Include libhppa.h.
4584
4585 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4586
4587         * mips-opc.c: Change dli to use M_DLI, and add dla.
4588
4589 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4590
4591         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4592
4593 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4594
4595         * mips-opc.c: Add r4650 mul instruction.
4596
4597 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4598
4599         * mips-opc.c: Add uld and usd macros for unaligned double load and
4600         store.
4601
4602 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4603
4604         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4605         mfdcr, mtdcr, icbt, iccci.
4606
4607 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4608
4609         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4610         signed char fields to shorts, more portable.
4611
4612 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4613
4614         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4615         char fields as signed chars, since they may have negative values.
4616
4617 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4618
4619         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4620           (mycroft@netbsd.org).
4621
4622 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4623
4624         From "Logg, Ed" <elogg@ea.com>:
4625         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4626         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4627         value.
4628
4629 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4630
4631         * ppc-opc.c: Changes based on patch from David Edelsohn
4632         <edelsohn@mhpcc.edu>.
4633         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4634         SPR.
4635         (FXM_MASK): Define.
4636         (insert_tbr): New static function.
4637         (extract_tbr): New static function.
4638         (XFXFXM_MASK, XFXM): Define.
4639         (XSPRBAT_MASK, XSPRG_MASK): Define.
4640         (powerpc_opcodes): Add instructions to access special registers by
4641         name.  Add mtcr and mftbu.
4642
4643 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4644
4645         * mips-opc.c (P3): Define.
4646         (mips_opcodes): Add mad and madu.
4647
4648 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4649
4650         * configure.in: Add W65 support.
4651         * disassemble.c: Likewise.
4652         * w65-opc.h, w65-dis.c: New files.
4653
4654 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4655
4656         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4657         immediates.
4658
4659 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4660
4661         * mips-opc.c: Add dli as a synonym for li.
4662
4663 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4664
4665         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4666         print something for reserved opcode values, even if it won't
4667         assemble again.
4668
4669         * mips-dis.c (_print_insn_mips): When initializing, shift right
4670         and mask, to avoid sign extension problems on the Alpha.
4671
4672         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4673         control registers.
4674
4675 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4676
4677         * sh-opc.h (mov.l gbr): Get direction right.
4678         * sh-dis.c (print_insn_shx): New function.
4679         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4680         print opcodes with right byte order.
4681
4682 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4683
4684         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4685         to avoid conflicts with getopt.
4686
4687 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4688
4689         * hppa-dis.c (print_insn_hppa): Read the instruction using
4690         bfd_getb32, so that it works on a little endian or 64 bit host.
4691         Remove unused local variable op.
4692
4693 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4694
4695         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4696         addu does not work correctly if -mips3.
4697
4698 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4699
4700         * a29k-dis.c (print_special): Add special register names defined
4701         on 29030, 29040 and 29050.
4702         (print_insn): Handle new operand type 'I'.
4703
4704 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4705
4706         * Makefile.in (INSTALL): Use top level install.sh script.
4707
4708 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4709
4710         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4711         that it works on a little endian host.
4712
4713 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4714
4715         * configure.in: Use ${config_shell} when running config.bfd.
4716
4717 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4718
4719         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4720
4721 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4722
4723         * a29k-dis.c (print_insn): Print the opcode.
4724
4725 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4726
4727         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4728
4729 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4730
4731         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4732
4733 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4734
4735         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4736         which store a value into memory.
4737
4738 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4739
4740         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4741         * arm-dis.c, arm-opc.h: New files.
4742
4743 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4744
4745         * Makefile.in (ns32k-dis.o): Add dependency.
4746         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4747         string, not as array of chars.
4748
4749 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4750
4751         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4752
4753         * sparc-opc.c: Added sparclite extended FP operations, and
4754         versions of v9 impdep* instructions permitting specification of
4755         the OPF field.
4756
4757 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4758
4759         * i960-dis.c (reg_names): Now const.
4760         (struct sparse_tabent): New type, copied from array type in mem
4761         function.
4762         (ctrl): Local static array ctrl_tab now const.
4763         (cobr): Local static array cobr_tab now const.
4764         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4765         static variable mem_tab no longer explicitly initialized.  Changed
4766         mem_init to const array of struct sparse_tabent.
4767         (reg): Local static variable reg_tab no longer explicitly
4768         initialized.  Changed reg_init to const array of struct
4769         sparse_tabent.
4770         (ea): Local static array scale_tab now const.
4771
4772         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4773         (REG_MAX): Updated.
4774
4775 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4776
4777         * configure.bat: the disassember needs to be enabled for
4778         "objdump -d" to work in djgpp.
4779
4780 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4781
4782         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4783         (invalid_float): Enabled general version, doesn't require running
4784         on ns32k host.  Changed to take char* argument, and test for
4785         explicitly specified sizes, instead of using sizeof() on host CPU
4786         types.
4787         (INVALID_FLOAT): Cast first argument.
4788         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4789         list_P032, list_M032): Now const.
4790         (optlist, list_search): Made appropriate arguments now point to
4791         const.
4792         (print_insn_arg): Changed static array of one-character-string
4793         pointers into a static const array of characters; fixed sprintf
4794         statement accordingly.
4795
4796 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4797
4798         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4799         from distribution. A ns32k-dis.c from a previous distribution has
4800         been brought up to date and supports the new interface.
4801
4802         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4803
4804         * configure.in: add bfd_ns32k_arch target support.
4805
4806         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4807         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4808
4809 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4810
4811         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4812         disassembly right.
4813
4814 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4815
4816         * h8300-dis.c, mips-dis.c: Don't use true and false.
4817
4818 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4819
4820         * configure.in: Change --with-targets to --enable-targets.
4821
4822 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4823
4824         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4825         opcodes to the first instruction with that opcode, to speed
4826         disassembly of large files.  From ralphc@pyramid.com (Ralph
4827         Campbell).
4828
4829 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4830
4831         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4832
4833 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4834
4835         * configure.bat: update to latest makefile.in
4836
4837 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4838
4839         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4840         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4841         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4842         slot insn is in a delay slot.
4843         * z8k-opc.h: (resflg): Fix patterns.
4844         * h8500-opc.h Fix CR insn patterns.
4845
4846 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4847
4848         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4849         "cmpl" before POWER versions, so that gas -many uses them.
4850
4851 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4852
4853         * disassemble.c: New file.
4854         * Makefile.in (OFILES): Add disassemble.o.
4855         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4856         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4857         binutils/configure.in.
4858
4859         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4860         opcode being examined.
4861
4862 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4863
4864         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4865         (insert_ral, insert_ram, insert_ras): New functions.
4866         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4867         RAS for store with update.
4868
4869 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4870
4871         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4872         (edelsohn@npac.syr.edu).
4873
4874 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4875
4876         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4877         immediate argument.
4878
4879 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4880
4881         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4882
4883 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4884
4885         * ppc-opc.c (powerpc_operands): The signedp field has been
4886         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4887         instead.  Add new operand SISIGNOPT.
4888         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4889         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4890         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4891         than signedp field.
4892
4893 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4894
4895         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4896         is a reserved word for dynix cc.
4897
4898 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4899
4900         * configure.in: Change error message to refer to bfd/config.bfd
4901         rather than bfd/configure.in.
4902
4903 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4904
4905         * ppc-opc.c: Define POWER2 as short alias flag.
4906         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4907         fsqrt.
4908
4909 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4910
4911         * i960-dis.c (print_insn_i960): Don't read a second word for
4912         opcodes 0, 1, 2 and 3.
4913
4914 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4915
4916         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4917
4918 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4919
4920         * m68881-ext.c: Removed; no longer used.
4921         * Makefile.in: Changed accordingly.
4922
4923         * m68k-dis.c (ext_format_68881): Don't declare.
4924         (print_insn_m68k): If an instruction uses place 'i', it uses at
4925         least four fixed bytes.
4926         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4927         extended float, convert to double using floatformat_to_double, not
4928         ieee_extended_to_double, and fetch the data before converting it.
4929
4930 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4931
4932         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4933         davidj@ICSI.Berkeley.EDU (David Johnson).
4934
4935 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4936
4937         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4938         PowerPC uses bdnz[l][a].
4939
4940 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4941
4942         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4943
4944 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4945
4946         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4947
4948         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4949         by Motorola PowerPC 601 with PPC_OPCODE_601.
4950         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4951         Disassemble Motorola PowerPC 601 instructions as well as normal
4952         PowerPC instructions.
4953
4954 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4955
4956         * i960-dis.c (reg, mem): Just use a static array instead of
4957         calling xmalloc.
4958
4959 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4960
4961         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4962         condition name index if this is for a negated condition.
4963
4964         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4965         Floating point format for 'H' operand is backwards from normal
4966         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4967         operands (fmpyadd and fmpysub), handle bizarre register
4968         translation correctly for single precision format.
4969
4970         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4971         or 'I' operands if the next format specifier is 'M' (fcmp
4972         condition completer).
4973
4974 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4975
4976         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4977         single number giving a bitmask for the MB and ME fields of an M
4978         form instruction.  Change NB to accept 32, and turn it into 0;
4979         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4980         (insert_mbe, extract_mbe): New functions.
4981         (insert_nb, extract_nb): New functions.
4982         (SC_MASK): Mask out SA and LK bits.
4983         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4984         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4985         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4986         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4987         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4988         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4989         (powerpc_macros): Define table of macro definitions.
4990         (powerpc_num_macros): Define.
4991
4992         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4993         if PPC_OPERAND_NEXT is set.
4994
4995 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4996
4997         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4998         char.  Retrieve contents using bfd_getl32 instead of shifting.
4999
5000 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5001
5002         * ppc-opc.c: New file.  Opcode table for PowerPC, including
5003         opcodes for POWER (RS/6000).
5004         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
5005         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5006         (CFILES): Add ppc-dis.c.
5007         (ppc-dis.o, ppc-opc.o): New targets.
5008         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5009
5010 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5011
5012         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5013         No space before 'u', 'f', or 'N'.
5014
5015 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
5016
5017         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5018         farther than we should.
5019
5020         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5021
5022 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5023
5024         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5025
5026 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5027
5028         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5029         needs it, to prevent reading past the end of a section.
5030
5031 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5032
5033         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5034         Removed t,A case for la; always use t,A(b) case.
5035
5036 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5037
5038         From Ted Lemen <mellon@pepper.ncd.com>
5039         * mips-dis.c (print_insn_arg): Handle 'k'.
5040         * mips-opc.c: Make cache use k, not t.
5041
5042 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5043
5044         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
5045         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5046         FLOAT_FORMAT_CODE to put out floating point register names.
5047
5048 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5049
5050         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5051
5052 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5053
5054         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5055
5056 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5057
5058         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5059         larger than 32.  Moved dsxx32 variants first for disassembler.
5060
5061 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5062
5063         * z8kgen.c, z8k-opc.h: Add full lda information.
5064
5065 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
5066
5067         * hppa-dis.c (print_insn_hppa): Do not emit a space after
5068         movb instructions.  Any necessary space will be emitted by
5069         the code to handle nullification completers.
5070
5071 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5072
5073         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5074
5075 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5076
5077         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
5078         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
5079
5080 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5081
5082         * mips-opc.c: Correct lwu opcode value (book had it wrong).
5083
5084 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5085
5086         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5087         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5088
5089 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
5090
5091         * m88k-dis.c (m88kdis): comment change.  Remove space after
5092           printing mnemonic.
5093           (printop): handle new arg types DEC and XREG for m88110.
5094
5095 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
5096
5097         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5098         type for absolute branch addresses.  Delete special
5099         "ble" and "be" code in 'W' operand code.
5100
5101 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5102
5103         * mips-opc.c: Set hazard information correctly for branch
5104         likely instructions.
5105
5106 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5107
5108         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
5109         info->fprintf_func for printing and info->print_address_func for
5110         address output.
5111
5112 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5113
5114         * mips-opc.c: Set INSN_TRAP for tXX instructions.
5115
5116 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5117
5118         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5119         Corrected second case of "b" for disassembler.
5120
5121 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5122
5123         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
5124         to BFD swapping routines to correspond to BFD name changes.
5125
5126 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5127
5128         * mips-opc.c: Change div machine instruction to be z,s,t rather
5129         than s,t.  Change div macro to be d,v,t rather than d,s,t.
5130         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
5131         rem and remu which generates only the corresponding div
5132         instruction.  This is for compatibility with the MIPS assembler,
5133         which only generates the simple machine instruction when an
5134         explicit destination of $0 is used.
5135         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5136
5137 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5138
5139         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5140         WR_31 hazard for bal, bgezal, bltzal.
5141
5142 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5143
5144         * hppa-dis.c (print_insn_hppa): Use print function
5145         from within the disassemble_info, not fprintf_filtered.
5146
5147 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5148
5149         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
5150         Law, law@cs.utah.edu.)
5151
5152 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5153
5154         * mips-opc.c ("absu"): Removed.
5155         ("dabs"): Added.
5156
5157 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5158
5159         * mips-opc.c: Added r6000 and r4000 instructions and macros.
5160         Changed hazard information to distinguish between memory load
5161         delays and coprocessor load delays.
5162
5163 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5164
5165         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
5166
5167 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5168
5169         * configure.in: Don't pass cpu to config.bfd.
5170
5171 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5172
5173         * m88k-dis.c (m88kdis): Make class unsigned.
5174
5175 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
5176
5177         * alpha-dis.c (print_insn_alpha): One branch format case was
5178         missing the instruction name.
5179
5180 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5181
5182         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5183         Add the arch-specific auxiliary files.
5184         (OFILES): Remove the arch-specific auxiliary files
5185         and use BFD_MACHINES instead of DIS_LIBS.
5186         * configure.in: Set BFD_MACHINES based on --with-targets option.
5187
5188 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5189
5190         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
5191         for swc1.
5192
5193 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5194
5195         * sparc-opc.c: Change CONST to const to deal with gcc
5196         -Dconst=__const -traditional.
5197
5198 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5199
5200         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5201         coprocessor instructions out of #if 0, and made them use new
5202         argument type "C".
5203
5204 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5205
5206         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5207
5208 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
5209
5210         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5211         instruction, for use by the disassembler.
5212
5213         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
5214         hand-coded sign extensions that depended on 32-bit host ints.
5215         FIXME, we still depend on big-endian host bitfield ordering.
5216         (sparc_print_insn):  Set the insn_info_valid field, and the
5217         other fields that describe the instruction being printed.
5218
5219 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
5220
5221         * sparc-opc.c (call): Accept all 6 addressing modes valid for
5222         `jmp' instead of just one of them.
5223
5224 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5225
5226         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5227         (fput_fp_reg_r): Renamed from fput_reg_r.
5228         (fput_fp_reg): New function.
5229         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5230
5231         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5232
5233         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5234
5235 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5236
5237         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5238
5239         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5240         don't output a space.
5241
5242         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5243
5244 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
5245
5246         * mips-opc.c: New file, containing opcode table from
5247         ../include/opcode/mips.h.
5248         * Makefile.in: Add it.
5249
5250 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5251
5252         * m88k-dis.c: New file, moved in from gdb and changed to use the
5253         new dis-asm.h disassembler interface.
5254         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5255         (m88k-dis.o): New target.
5256
5257 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
5258
5259         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5260         argument string const char * to correspond to opcode/mips.h.
5261
5262 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
5263
5264         * mips-dis.c: Updated to account for name changes in new version
5265         of opcode/mips.h.
5266         * Makefile.in: Added header file dependencies.
5267
5268 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
5269
5270         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5271
5272 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5273
5274         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5275         extend, rather than shifts.
5276
5277 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
5278
5279         * Makefile.in: Undo 15 June change.
5280
5281 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
5282
5283         * m68k-dis.c (print_insn_arg):  Change return value to byte count
5284         or error code.
5285         * m68k-dis.c:  Re-write to detect invalid operands before
5286         printing anything, so we can handle this the same way we
5287         handle invalid opcodes.
5288
5289 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5290
5291         * sh-dis.c, sh-opc.h: Understand some more opcodes.
5292
5293 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
5294
5295         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5296         header files.
5297
5298 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5299
5300         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5301
5302         * configure.in: Do make sysdep.h link.
5303         * Makefile.in: Search ../include.  Don't search ../bfd.
5304
5305 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
5306
5307         Changes from Jeff Law, law@cs.utah.edu:
5308         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
5309         Do not print a space before the completers specified by
5310         'a' and 'd'.
5311
5312 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
5313
5314         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5315         defined, since gdb has been fixed.
5316
5317         Changes from Jeff Law, law@cs.utah.edu:
5318         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5319         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5320         be a *disassemble_info, not a *FILE.
5321         * hppa-dis.c: Support 'd', '!', and 'a'.
5322         * hppa-dis.c: Support 's' to extract a 2 bit space register.
5323         * hppa-dis.c: Delete cases which are no longer needed.
5324
5325 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
5326
5327         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5328
5329 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5330
5331         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5332         H8/300-H opcodes.
5333
5334 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
5335
5336         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5337         * configure.in:  No longer need to configure to get sysdep.h.
5338
5339 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
5340
5341         * Patches from Jeffrey Law <law@cs.utah.edu>.
5342         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5343         templates for 1.1 FP computational instructions.
5344
5345 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5346
5347         * h8500-dis.c (print_insn_h8500): Address argument is type
5348         bfd_vma.
5349         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5350         Ditto.
5351
5352         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5353         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5354
5355         * sparc-dis.c (compare_opcodes): Move static declaration to
5356         top-level.
5357
5358 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5359
5360         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5361         instruction, remove unimp hack from 'l' argument.
5362
5363 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5364
5365         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5366         happy.
5367
5368 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5369
5370         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5371         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5372         instructions.
5373
5374 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5375
5376         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5377         arrays of string pointers to 2-d arrays of chars, to save
5378         space.
5379
5380 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5381
5382         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5383         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5384
5385 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5386
5387         * hppa-dis.c: New file from Utah, adapted to new disassembler
5388         calling interface.
5389         * Makefile.in: Include it.
5390
5391 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5392
5393         * sh-dis.c, sh-opc.h: New files.
5394
5395 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5396
5397         * alpha-dis.c, alpha-opc.h: New files.
5398
5399 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5400
5401         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5402         value.
5403
5404 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5405
5406         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5407
5408 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5409
5410         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5411         const.
5412
5413 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5414
5415         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5416         and double percent signs a few places.
5417
5418         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5419
5420         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5421         Use info->print_address_func not print_address.
5422
5423         * dis-buf.c (generic_print_address): New function.
5424
5425 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5426
5427         * Makefile.in: Add sparc-dis.c.
5428         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5429         From GDB:
5430             Add `add' instruction to the set that get checked
5431             for a preceding `sethi' in order to print an absolute address.
5432             * (print_insn):  Disassembly prefers real instructions.
5433             (is_delayed_branch):  Speed up.
5434             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5435             Still missing some float ops, and needs testing.
5436             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5437             F_ALIAS.  Use printf, not fprintf, when not passing a file
5438             pointer...
5439             (compare_opcodes): Check that identical instructions have
5440             identical opcodes, complain otherwise.
5441         From binutils:
5442             * New 'm' arg.
5443             * Include reg_names.
5444         From neither:
5445             Use dis-asm.h/read_memory_func interface.
5446
5447 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5448
5449         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5450           deliberately return non-zero to setjmp from longjmp.  Otherwise
5451           this code fails to compile.
5452
5453 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5454
5455         * m68k-dis.c:  Fix prototype for fetch_arg().
5456
5457 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5458
5459         * dis-buf.c: New file, for new read_memory_func interface.
5460         Makefile.in (OFILES): Include it.
5461         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5462         Use new read_memory_func interface.
5463
5464 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5465
5466         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5467         * h8500-opc.h: Fix couple of opcodes.
5468
5469 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5470
5471         * Makefile.in: add dvi & installcheck targets
5472
5473 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5474
5475         * Makefile.in:  Update for h8500-dis.c.
5476
5477 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5478
5479         * h8500-dis.c, h8500-opc.h: New files
5480
5481 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5482
5483         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5484         ../include/dis-asm.h.
5485         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5486         and ../gdb/m68k-pinsn.c).
5487         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5488         and ../gdb/i386-pinsn.c).
5489         * m68881-ext.c:  New file.  Moved definition of
5490         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5491         * Makefile.in:  Adjust for new files.
5492         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5493         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5494         can be dis-assembled.
5495
5496 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5497
5498         * mips-dis.c (print_insn_arg): Now returns void.
5499
5500 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5501
5502         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5503         files that use the macros.
5504
5505 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5506
5507         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5508         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5509         (CFILES): Added mips-dis.c.
5510
5511 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5512
5513         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5514         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5515
5516 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5517
5518         * Makefile.in:  Improve *clean rules.
5519         * configure.in:  Allow a default host.
5520
5521 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5522
5523         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5524         files include other sysdep files
5525
5526 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5527
5528         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5529
5530 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5531
5532         * configure.in:  For host support, use ../bfd/configure.host
5533         so it stays in sync with the ../bfd/hosts database.
5534
5535 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5536
5537         * configure.in: use cpu-vendor-os triple instead of nested cases
5538
5539 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5540
5541         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5542         *always* the wrong one.
5543
5544 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5545
5546         * z8kgen.c: added copyright info
5547
5548 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5549
5550         * z8k-dis.c (unparse_instr): prettier tabs
5551         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5552
5553 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5554
5555         * configure.in:  Add ncr* configuration.
5556         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5557         picayune ANSI compilers happy.
5558
5559 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5560
5561         * configure.in (i386):  Make i386 and i486 synonymous for now.
5562         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5563
5564 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5565
5566         * Makefile.in (install): Fix typo.
5567
5568 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5569
5570         * Makefile.in (make):  Remove obsolete crud.
5571         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5572
5573 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5574
5575         * Makefile.in: since there are no SUBDIRS, remove rule and
5576         references of subdir_do.
5577
5578 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5579
5580         * Makefile.in (install): Get the library name right here too.
5581         Don't install bfd.h, since it's unrelated to this library.  No
5582         subdirs to recurse into, either.
5583         (CFILES): The source file has a .c suffix, not .o.
5584
5585         * sparc-opc.c: New file, moved from BFD.
5586         * Makefile.in (OFILES): Build it.
5587
5588 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5589
5590         * z8k-dis.c: fixed forward refferences of some declarations.
5591
5592 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5593
5594         * Makefile.in: get the name of the library right
5595
5596 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5597
5598         * z8k-dis.c: knows how to disassemble z8k stuff
5599         * z8k-opc.h: new file full of z8000 opcodes
5600
5601 \f
5602 Local Variables:
5603 version-control: never
5604 End: