1 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
3 * mips-opc.c (IS_M): Added.
6 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
8 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
12 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
15 * cgen-asm.in (insert_1): New function.
16 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
17 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
18 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
19 * cgen-dis.in (extract_1): New function.
20 (extract_normal): buf_ctrl renamed to ex_info, update type.
21 Progress on handling of CGEN_INT_INSN_P.
22 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
23 Update handling of CGEN_INT_INSN_P. Handle errors from
24 @arch@_cgen_extract_operand.
25 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
26 (default_print_insn): Renamed from print_insn.
27 Handle ! CGEN_INT_INSN_P.
28 (print_insn_@arch@): Handle error returns from print_insn.
29 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
30 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
31 (@arch@_cgen_lookup_get_insn_operands): Ditto.
33 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
36 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
38 * m10300-opc.c: Allow autoincrement stores using the same register
39 for source and destination operands.
41 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
43 * m10300-opc.c: DSP instrutions which only write to one general
44 register have no restrictions on matching operands.
46 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
49 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
51 * m32r-opc.h,m32r-opc.c: Regenerate.
54 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
56 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
59 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
61 * i386-dis.c (OP_3DNowSuffix): New static function.
64 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
65 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
66 (insn_codep): New static variable.
67 (print_insn_x86): Init insn_codep after prefixes.
68 (grps): Add GRP14 entries for prefetch, prefetchw.
71 From Jeff B Epler <jepler@usgs.gov>
72 * i386-dis.c (Suffix3DNow): New table.
74 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
76 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
78 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
80 * d10v-dis.c (print_operand): If num is nonzero, then
81 add OPERAND_ACC1, not OPERAND_ACC0.
83 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
85 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
88 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
90 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
94 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
96 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
99 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
101 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
103 start-sanitize-nortel-ppc750
104 1998-09-09 Michael Meissner <meissner@cygnus.com>
106 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
109 end-sanitize-nortel-ppc750
110 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
112 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
114 (print_insn_little_arm): Detect Thumb symbols in elf object
117 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
119 * alpha-dis.c (print_insn_alpha): Use the machine type to
120 decide which PALcode set to include.
122 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
124 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
126 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
128 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
129 MSUB and MSUBS instructions.
132 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
134 * mips-opc.c: Insert contents of vu0.h, rather than including it.
136 * Makefile.am: Rebuild dependencies.
140 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
142 * ppc-opc.c (powerpc_operands): Omit parens around additions in
145 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
147 start-sanitize-coldfire
148 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
149 ColdFire, as below for mulsl and mulul.
151 end-sanitize-coldfire
152 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
153 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
154 +, -, and d for ColdFire.
156 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
157 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
158 (extract_mbe): Likewise.
160 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
162 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
164 * m10300-opc.c: First cut at UDF instructions.
166 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
168 * m32r-opc.c: Regenerate (remove semantic descriptions).
170 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
172 * arm-dis.c (print_insn_big_arm): Fix indentation.
173 (print_insn_little_arm): Likewise.
175 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
177 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
179 (print_insn_little_arm): Likewise.
181 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
183 Move all global state data into opcode table struct, and treat
184 opcode table as something that is "opened/closed".
185 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
186 (cgen_asm_init): Delete.
187 (cgen_set_parse_operand_fn): New function.
188 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
189 (cgen_dis_init): Delete.
190 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
191 (cgen_current_{opcode_table_mach,endian}): Delete.
192 start-sanitize-cygnus
193 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
194 * cgen-dis.in (all fns): Ditto.
195 * cgen-opc.in (all fns): Ditto.
197 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
199 start-sanitize-cygnus
200 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
202 * cgen-dis.in (print_normal): Split into two.
203 (print_address): New function.
204 (extract_insn_normal): Clarify insn_value arg.
205 (print_int_insn): Renamed from print_insn.
206 (print_insn): New arg.
207 (print_insn_@arch@): Open opcode table if not already done so.
208 Move reading of insn into print_insn.
211 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
213 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
217 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
219 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
220 accept an accumulator choice.
221 * m32r-opc.c,m32r-opc.h: Regenerate.
224 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
226 * m10300-opc.c: Add entries for "no_match_operands" field in
230 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
232 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
236 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
238 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
241 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
243 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
245 * m10300-opc.c: Add autoincrement memory loads/stores.
249 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
251 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
252 phmsubh respectively.
255 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
257 start-sanitize-cygnus
258 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
260 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
261 @arch_cgen_get_int_operand.
262 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
263 Update call to @arch@_cgen_insert_operand.
264 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
265 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
266 (extract_insn_normal): New arg `pc', callers updated.
267 Update call to @arch@_cgen_extract_operand.
268 (print_insn): Update call to CGEN_EXTRACT_FN.
270 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
273 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
275 * m10300-opc.c: Fix load to sp and store from sp for the am33.
276 Add more multimedia instructions.
278 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
280 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
285 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
287 * mips-opc.c (pref): Enabled for the r5900.
290 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
292 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
294 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
296 (OP_J): Remove unnecessary subtraction when 16-bit displacement
297 will be masked later.
300 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
302 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
305 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
307 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
308 from raw register #s to symbolic names to make debugging easier.
311 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
313 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
315 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
317 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
318 start-sanitize-cygnus
319 * Makefile.am (CGENDIR): Set via configure.
320 (CGEN): New variable.
321 (CGENFILES): object.scm renamed to cos.scm.
322 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
323 (stamp-m32r): Pass prefix to run-cgen.
324 * Makefile.in: Regenerate.
325 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
326 * cgen-dis.in: Ditto.
327 * cgen-opc.in: Ditto.
328 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
329 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
330 * configure: Regenerate.
334 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
336 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
338 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
340 * m10300-opc.c: Reorder more instructions so that we do not
341 accidentally match a mn10300 instruction when we really
342 wanted an am33 instruction.
345 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
347 * m10300-dis.c: Only recognize instructions from the currently
349 * m10300-opc.c: Add field indicating the particular variant of
350 the mn10300 each instruction is available on.
352 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
354 * configure.in: For bfd_vax_arch, build vax-dis.lo.
355 * Makefile.am: Rebuild dependencies.
356 (CFILES): Add vax-dis.c.
357 (ALL_MACHINES): Add vax-dis.lo.
358 * aclocal.m4: Rebuild with current libtool.
359 * configure, Makefile.in: Rebuild.
361 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
363 * vax-dis.c: New file, from work by Pauline Middelink
364 <middelin@polyware.iaf.nl>.
365 * disassemble.c (ARCH_vax): Define if ARCH_all.
366 (disassembler): Add case for ARCH_vax.
367 * makefile.vms: Support compilation on vms/vax.
370 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
372 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
373 the DVP_OPERAND_RELOC_11_S4 relocation.
377 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
379 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
381 (disassemble): Correctly handle FMT_D10 instructions.
383 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
384 am33 shift instructions.
386 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
388 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
389 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
391 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
392 (mn10300_opcodes): Reorder so as to try and select opcodes from
393 the core chip when multiple alternatives exist. Change several
394 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
395 "macbu" instructions. Fix typos in a couple DSP instructions too.
398 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
400 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
401 related to sign extension and the size of ints.
403 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
405 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
406 instructions. Support (sp) addressing mode by expanding it into
410 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
412 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
413 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
414 be used as immediate values.
418 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
420 * m10300-opc.c: Support 4 byte DSP instructions.
423 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
425 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
428 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
430 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
433 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
435 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
438 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
440 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
441 found on the mn10300.
444 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
446 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
449 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
451 * mips-dis.c (print_insn_little_mips): Previously, instruction
452 printing references the symbol table to determine whether the
453 instruction resides in a block regular instructions or mips16
454 instructions. However, when the disassembler gets used in other
455 environments where the symbol table is not present, we no longer
456 rely in the symbol table, rather, use the low bit of the
457 instructions address to guess. There should be no change for usage
458 of the disassembler in host based programse, gdb ,objdump.
459 (print_insn_big_mips): ditto.
460 (print_insn_mips): ditto
462 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
464 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
466 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
469 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
470 operands for the am33.
471 (mn10300_opcodes): Add new instructions from the am33.
473 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
475 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
477 * i386-dis.c (index16): Add '%' to register names. Use ','
480 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
482 * i386-dis.c: Don't print opcode suffix when we can figure out the
483 size (and gas can!) by register operands, or from the default
485 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
487 (dis386, dis386_twobyte, grps): Use new suffix macros.
488 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
489 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
490 order of cmps operands to agree with Intel docs. Correct operand
491 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
492 agree with Intel docs.
493 (print_insn_x86): Print orphan fwait before other prefixes.
494 Return correct byte count for orphan fwait with prefixes. Don't
495 print `bound' operands in reverse order.
496 (ckprefix): Stop accumulating prefixes if we get fwait.
497 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
499 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
501 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
502 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
504 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
506 Fix problems when bfd_vma is wider than long.
507 * i386-dis.c: Make op_address and start_pc unsigned.
508 (set_op): Make parameter unsigned.
509 (print_insn_x86): Cast to bfd_vma when passing a value to
511 * ns32k-dis.c (CORE_ADDR): Don't define.
512 (print_insn_ns32k): Change type of addr to bfd_vma. Use
513 bfd_scan_vma to read back address.
514 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
516 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
517 (NEXTULONG): New definition.
518 (print_insn_m68k): Avoid overflow when computing third argument of
520 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
521 Use disp instead of val to store offset values.
522 (print_indexed): Use base_disp instead of word to store base
523 displacement, to avoid overflow.
524 * m10300-dis.c (disassemble): Cast value to long when computing
525 pc-relative address, to get correct sign extension.
527 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
529 * m32r-opc.c: Regenerate.
531 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
533 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
534 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
536 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
538 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
540 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
542 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
544 (OP_DSreg): Rename from OP_DSSI.
545 (OP_ESreg): Rename from OP_ESDI.
546 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
548 (append_seg): Rename from append_prefix.
549 (ptr_reg): New function.
550 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
552 (PREFIX_ADDR): Rename from PREFIX_ADR.
553 (float_reg): Add non-broken opcodes for people who don't want
556 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
558 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
561 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
563 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
565 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
567 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
568 0; produce error message for shifts of size 32 (or 64 for 64-bit
569 shifts), because the hardware doesn't support them.
572 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
574 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
577 * vu0.h (sqc2): Fix opcode.
579 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
583 start-sanitize-cygnus
584 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
586 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
587 Change pinfo to use WR_HILO.
590 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
592 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
593 LONG_2, LONG_2b formats to use this new operand.
595 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
597 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
599 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
601 * sparc-dis.c (print_insn_sparc): big endian instruction / little
604 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
606 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
607 and SHORT_B3b formats to use Rb instead of Ra.
609 Add FLAG_MUL16 to MUL2XH opcode.
611 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
612 to existing 1.1.1 parallelisation prohibition procedure.
614 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
616 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
617 * cgen-dis.in (extract_normal): Likewise.
618 * m32r-asm.c,m32r-dis.c: Regenerate.
621 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
623 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
627 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
629 * mips-opc.c (multu1): Add two operand variant for the r5900.
632 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
634 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
635 with a shift count of 0.
638 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
640 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
642 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
644 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
645 (_print_insn_mips): Likewise.
646 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
650 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
652 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
653 (cgen_hw_lookup_by_num): New function.
656 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
659 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
661 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
663 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
665 * sparc-dis.c (print_insn_sparc): Always fetch instructions
666 as big-endian on SPARClite.
669 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
671 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
673 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
677 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
679 * d30v-opc.c (pre_defined_register): Remove alias for r0.
682 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
684 * mips-opc.c (break): Added 20-bit single-operand break
685 instruction for R5900 only.
688 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
690 * po/Make-in (install-info): New target.
692 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
694 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
695 * configure: Rebuild.
697 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
699 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
700 variety of ISA2 instructions to set bottom ten bits of trap code.
702 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
704 * Makefile.am (config.status): Add explicit target so that
705 config.status depends upon bfd/configure.in.
706 * Makefile.in: Rebuild.
708 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
710 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
711 instructions to set bottom ten bits of break code.
712 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
713 for above optional argument.
715 start-sanitize-cygnus
716 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
718 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
719 * m32r-opc.h: Regenerate.
722 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
724 * makefile.vms: Run dec c with /nodebug.
726 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
728 * Makefile.in: Rebuilt.
729 * Makefile.am: Regenerated dependencies with mkdep.
731 * opintl.h (_): Define as dgettext.
733 start-sanitize-cygnus
734 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
736 * configure.in: Add support for --enable-cgen-maint.
737 * Makefile.am (M32R_DEPS): New variable.
738 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
739 * aclocal.m4: Regenerate.
740 * Makefile.in: Regenerate.
741 * configure: Regenerate.
743 * Makefile.am (CGENFILES): Add minsn.scm.
746 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
748 * cgen-asm.c: Internationalised.
749 start-sanitize-cygnus
750 * cgen-asm.in: Internationalised.
751 * cgen-opc.in: Internationalised.
753 * m32r-asm.c: Internationalised.
754 * m32r-dis.c: Internationalised.
755 * m32r-opc.c: Internationalised.
757 * aclocal.m4: Regenerated.
758 * configure: Regenerated.
759 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
760 * Makefile.in: Rebuild.
761 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
762 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
764 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
766 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
768 * aclocal.m4, configure: Rebuild with current tools.
770 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
772 * opintl.h: New file - contains internationalisation macros used
773 by source files in this directory.
774 * po/: New subdirectory - contains internationalisation files.
775 * po/Make-in: New file - Makefile constructor.
776 * po/POTFILES.in: New file - list of files in opcodes directory
777 that should be scan for internationalisation macros.
778 * po/opcodes.pot: New file - list of internationisation strings
779 found in files mentioned in po/POTFILES.in.
780 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
781 entry. Add intl directory to include paths.
782 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
783 HAVE_STRCPY, HAVE_LC_MESSAGES
784 * configure.in: Add rule to build Makefile in po subdirectory.
785 * Makefile.in: Rebuilt.
786 * aclocal.m4: Rebuilt.
787 * config.in: Rebuilt.
788 * configure: Rebuilt.
789 * alpha-opc.c: Internationalised.
790 * arc-dis.c: Internationalised.
791 * arc-opc.c: Internationalised.
792 * arm-dis.c: Internationalised.
793 * cgen-asm.c: Internationalised.
794 * d30v-dis.c: Internationalised.
795 * dis-buf.c: Internationalised.
797 * dvp-dis.c: Internationalised.
798 * dvp-opc.c: Internationalised.
800 * h8300-dis.c: Internationalised.
801 * h8500-dis.c: Internationalised.
802 * i386-dis.c: Internationalised.
803 * m10200-dis.c: Internationalised.
804 * m10300-dis.c: Internationalised.
805 * m68k-dis.c: Internationalised.
806 * m88k-dis.c: Internationalised.
807 * mips-dis.c: Internationalised.
808 * ns32k-dis.c: Internationalised.
809 * opintl.h: Internationalised.
810 * ppc-opc.c: Internationalised.
811 * sparc-dis.c: Internationalised.
812 * v850-dis.c: Internationalised.
813 * v850-opc.c: Internationalised.
815 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
817 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
818 (asm_hash_table_entries): New variable.
819 (cgen_asm_init): Free asm_hash_table_entries.
820 (hash_insn_array,hash_insn_list): New functions.
821 (build_asm_hash_table): Use them. Hash macro insns as well.
822 (cgen_asm_lookup_insn): Update.
823 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
824 (dis_hash_table_entries): New variable.
825 (cgen_dis_init): Free dis_hash_table_entries.
826 (hash_insn_array,hash_insn_list): New functions.
827 (build_dis_hash_table): Use them. Hash macro insns as well.
828 (cgen_dis_lookup_insn): Update.
829 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
830 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
831 (cgen_macro_insn_count): New function.
832 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
833 All callers updated. Sanity check result of extract fn.
834 (@arch@_cgen_get_insn_operands): Change result type to void.
835 Delete args insn_value, length. New arg fields. All callers updated.
836 (@arch@_cgen_lookup_get_insn_operands): New function.
837 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
839 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
841 * i386-dis.c (OP_DSSI): Print segment override.
844 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
846 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
850 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
852 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
856 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
858 * vu0.h (vlqd, vlqi): Update per revised specs.
862 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
864 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
865 (vif_operands): Update.
866 (vif_get_unpackloc): Delete.
867 (state_vif_unpackloc{,_star_p}): Delete.
868 (dvp_opcode_init_parse): Update.
869 (vif_unpack_len_value): Avoid divide by zero.
873 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
875 * vu0.h: Specs changed for VCALLMSR bit pattern.
876 * mips-dis.c: (print_insn_arg) Matching change.
879 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
881 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
884 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
886 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
887 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
888 * configure.in: Define and substitute WIN32LDFLAGS and
890 * aclocal.m4: Rebuild with new libtool.
891 * configure, Makefile.in: Rebuild.
894 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
896 * vu0.h: Corrected bit pattern for VMAXI opcode.
899 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
901 * m32r-opc.c: Regenerate.
904 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
906 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
907 (dvp_expand_macro): Implement.
908 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
909 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
912 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
914 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
915 before trying to copy it.
916 * Makefile.in: Rebuild.
918 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
920 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
923 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
925 * m32r-opc.c: Fix bit patterns for SAT and SATB.
928 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
930 * ns32k-dis.c (bit_extract_simple): New function to extract bits
931 from an arbitrary valid buffer instead of fetching them on demand
933 (invalid_float): use bit_extract_simple() instead of bit_extract().
936 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
938 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
939 * m32r-opc.h: Add extra control registers.
942 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
944 From H.J. Lu <hjl@gnu.org>:
945 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
948 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
950 * Branched binutils 2.9.
952 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
954 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
955 disassembling last 4 bytes of a section.
957 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
959 Fix some gcc -Wall warnings:
960 * arc-dis.c (print_insn): Add casts to avoid warnings.
961 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
962 * d10v-dis.c (dis_long, dis_2_short): Likewise.
964 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
965 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
966 (parse_bc, parse_vfreg, parse_accdest): Likewise.
967 (parse_ffstreg, parse_vif_mode): Likewise.
969 * m10200-dis.c (disassemble): Likewise.
970 * m10300-dis.c (disassemble): Likewise.
971 * ns32k-dis.c (print_insn_ns32k): Likewise.
972 * ppc-opc.c (insert_ral, insert_ram): Likewise.
973 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
974 * cgen-opc.c (cgen_keyword_search_next): Likewise.
975 * d10v-dis.c (dis_long, dis_2_short): Likewise.
976 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
978 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
979 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
980 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
982 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
984 * tic80-dis.c (print_one_instruction): Likewise.
986 * w65-dis.c (print_operand): Likewise.
987 * z8k-dis.c (fetch_data): Likewise.
988 * a29k-dis.c: Add return type for find_byte_func_type.
989 * arc-opc.c: Include <stdio.h>. Remove declarations of
990 insert_multshift and extract_multshift.
991 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
993 (extract_value): Fully parenthesize expression.
995 * dvp-opc.c: Include <ctype.h>.
996 (print_sdest): Add default case to switch.
998 * h8500-dis.c (print_insn_h8500): Initialize local variables.
999 * h8500-opc.h (h8500_table): Fully bracket initializer.
1000 * w65-opc.h (optable): Likewise.
1001 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1002 * i386-dis.c (OP_E): Initialize local variables.
1003 * m10200-dis.c (print_insn_mn10200): Likewise.
1004 * mips-dis.c (print_insn_mips16): Likewise.
1005 * sh-dis.c (print_insn_shx): Likewise.
1006 * v850-dis.c (print_insn_v850): Likewise.
1007 * ns32k-dis.c (print_insn_arg): Declare.
1008 (get_displacement, invalid_float): Declare.
1009 (list_search, sign_extend, flip_bytes): Declare return type.
1010 (get_displacement): Likewise.
1011 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1013 (print_insn_ns32k): Make i unsigned.
1014 (invalid_float): Make static. Declare type of val.
1015 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1016 on each for iteration.
1017 * tic30-dis.c (get_indirect_operand): Likewise.
1018 * z8k-dis.c (print_insn_z8001): Declare return type.
1019 (print_insn_z8002): Likewise.
1020 (unparse_instr): Fix sprintf format strings.
1022 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1024 * mips-opc.c: Add "sync.l" and "sync.p".
1027 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1029 * dvp-opc.c (extract_vif_datalen): Rewrite.
1030 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1032 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1034 * dvp-dis.c (print_insn): Print unpack address in hex.
1035 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1036 Don't skip over '*', just record it.
1037 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1038 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1039 Don't skip over '*', just record it.
1040 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1041 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1042 (vif_opcodes): Likewise.
1043 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1044 (vif_macros,vif_macro_count): New globals.
1045 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1046 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1047 (vif_get_wl_cl): New function.
1048 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1051 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1053 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1054 default m68k variant to recognize.
1056 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1057 (ctrl, cobr, mem, ea): Likewise.
1058 (print_addr): Likewise. Remove cast.
1059 (ea): Cast argument of print_addr to bfd_vma.
1061 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1063 (cgen_parse_unsigned_integer): Likewise.
1064 (cgen_parse_address): Likewise.
1066 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1068 * i960-dis.c (ctrl): Add full braces to structure initialization.
1069 (cobr, mem, reg): Likewise.
1070 (ea): Correct parenthesization in expression.
1072 * cgen-asm.c: Include <ctype.h>.
1073 (build_asm_hash_table): Remove unused local variable i.
1074 (cgen_parse_keyword): Add casts to avoid warnings.
1076 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1077 symbol. Fix indentation.
1078 (print_insn_little_arm): Likewise.
1080 start-sanitize-r5900
1081 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1083 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1087 start-sanitize-m32rx
1088 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1090 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1095 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1097 * dvp-opc.c (vif_operand_datalen_special): New global.
1100 start-sanitize-r5900
1101 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1103 * vu0.h (vcallms): Use 'O' for call target operand.
1104 * mips-dis.c (print_insn_arg): Handle 'O'.
1107 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1109 * configure.in: Use AM_DISABLE_SHARED.
1110 * aclocal.m4, configure: Rebuild with libtool 1.2.
1112 start-sanitize-r5900
1113 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1115 * mips-dis.c: Change '%' to '#' in r5900 support.
1119 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1121 These patches are courtesy of Jonathan Walton and Tony Thompson
1122 (athompso@cambridge.arm.com).
1124 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1127 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1128 both the offset and the label closest to the destination.
1130 start-sanitize-r5900
1131 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1133 * vu0.h: New file with cop2/vu0 instructions.
1134 * mips-opc.c: Include vu0.h.
1135 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1137 (print_insn_mips): Do not emit a tab after an instruction if the
1138 first arg is an instruction completer (&). If the next arg is an
1139 escape character (%), then print the next arg verbatim.
1140 * Makefile.am (mips-opc.lo): Depend on vu0.h
1144 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1146 * dvp-opc.c (vif_opcodes): Add stcycl.
1148 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1150 * dvp-dis.c (print_dma): Change length from 16 to 8.
1153 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1155 * m32r-opc.h: Regenerate.
1158 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1160 * dvp-opc.c (print_dest1): Print dest spec again.
1161 (print_vfreg,print_accdest): Likewise.
1162 (vif_unpack_len): Round result up to word boundary.
1165 start-sanitize-vr4320
1166 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1168 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1170 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1172 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1177 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1179 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1180 (print_insn): Do mask comparison on proper opcode word.
1181 Print unsigned values in hex.
1182 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1183 (parse_bc): Catch missing dest.
1184 (parse_vfreg): Replace atoi call with strtol.
1185 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1186 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1187 (extract_gif_eop): New function.
1188 (gif_operands): Update eop entry.
1189 (VGIFOP,VGIFNREGS): Fix calcs.
1190 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1191 (gif_regs): Add entry for unused 11 case.
1192 (print_gif_regs): Print empty list instead of nothing.
1193 (extract_gif_nloop): Fix value calc.
1194 (print_gif_nloop): Always print value, even if 0.
1195 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1196 (vif_operands): Use them for wl,cl fields.
1197 (state_vif_wl,state_vif_cl): New static locals.
1198 (parse_vif_mode): Handle numeric args.
1199 (vif_unpack_len_value,vif_unpack_len): New functions.
1200 (vif_insn_len): Call vif_unpack_len.
1203 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1205 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1207 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1209 * cgen-asm.in: Move insertion of generated routines to top of file.
1210 (insert_normal): Add prototype. Delete `shift' arg.
1211 * cgen-dis.in: Move insertion of generated routines to top of file.
1212 (extract_normal): Add prototype. Delete `shift' arg.
1213 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1214 (print_keyword): Add prototype. Fix type of `attrs' arg.
1216 start-sanitize-vr4320
1217 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1219 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1220 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1223 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1225 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1226 assume that info->symbols is non-empty.
1228 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1230 * alpha-opc.c (cvtqs) There is no such thing.
1231 (cvttq): Missing most of the /*d variants.
1233 start-sanitize-r5900
1234 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1236 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1238 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1239 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1242 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1244 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1245 delayed branches or jumps.
1248 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1250 * dvp-opc.c (vif_operands): Add unpack[u] support.
1251 (vif_opcodes): Ditto.
1252 (*_vif_imrubits): Renamed from *_vif_imrbits.
1254 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1256 * dvp-dis.c (print_insn): Handle word number.
1257 Handle mips address vs vu address.
1258 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1259 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1260 ({insert,extract}_dma_addr): Fix word ofset.
1261 ({insert,print}_gif_regs): Fix encode/decode.
1264 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1266 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1268 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1269 * tic30-dis.c (print_branch): Likewise.
1271 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1272 * dvp-dis.c (dvp_info_mach_type): New function.
1273 (print_insn_dvp): Call it.
1274 (print_vif): Return length of 4 if mpg or direct insn so following
1275 insns get properly disabled.
1276 (print_gif): Fix word order.
1277 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1278 (gif_operands): Fix word order.
1279 (gif_opcodes): Likewise.
1280 ({insert,extract,print}_gif_regs): Likewise.
1281 (gif_regs): Add new register number/name changes.
1282 (dma_opcodes): Add dmarefe insn.
1285 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1287 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1288 saved_symbol code as it is no longer needed.
1290 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1292 * cgen-asm.c: Include symcat.h.
1293 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1295 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1298 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1300 * dvp-opc.c (extra_dma_flags): Fix typos.
1301 (dma_operands): Fix word numbers.
1302 (dma_opcodes): Likewise.
1303 ({insert,extract}_dma_flags): Likewise.
1306 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1308 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1311 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1313 * dvp-dis.c (print_gif): Complete.
1314 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1315 (state_gif_{nregs,regs,nloop}): New static locals.
1316 (*_gif_*): Complete.
1317 (dvp_opcode_init_{parse,print}): Init gif state locals.
1318 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1319 (vif_insn_len): Handle `unpack'.
1320 ({insert,extract}_dma_flags): Complete.
1323 start-sanitize-r5900
1324 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1326 * mips-opc.c (mula.s): Renamed from multa.s.
1329 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1331 * m32r-opc.[ch]: Regenerate.
1334 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1336 * dvp-opc.c (dma_operands): Rewrite.
1337 (dma_operand_{count,addr}): New globals.
1338 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1339 (insert_dma_addr): Insert value into insn.
1340 (extract_dma_addr): Extract value from insn.
1342 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1344 * dvp-dis.c (print_vu): Handle loi insns.
1345 (print_insn): Likewise.
1346 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1347 (vu_operands): Make LDEST1 a FAKE operand.
1348 (parse_dest1): Allow elided argument.
1349 (print_dest1): Don't print the argument.
1351 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1353 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1354 (print_vfreg): Don't print dest spec.
1355 (parse_accdest): Dest spec is optional.
1356 (print_accdest): Don't print dest spec.
1359 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1361 * Makefile.am (CGENFILES): Update.
1362 * Makefile.in: Regenerate.
1363 * cgen-asm.in (insert_normal): Result is error message now.
1364 Validate value to be inserted.
1365 (insert_insn_normal): Result is error message now.
1366 (@arch@_cgen_assemble_insn): Update.
1367 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1368 arguments. Don't perform validation here.
1369 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1371 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1373 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1374 operand instance list.
1375 * m32r-opc.c: Regenerate.
1377 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1379 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1380 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1382 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1384 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1386 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1388 * configure.in: Get the version number from BFD.
1389 * configure: Rebuild.
1391 From H.J. Lu <hjl@gnu.org>:
1392 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1393 * Makefile.in: Rebuild.
1395 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1397 * m32r-opc.c: Regenerate.
1398 * m32r-opc.h: Regenerate.
1400 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1402 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1403 Ignore ALIAS insns if asked to.
1404 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1405 * m32r-opc.c: Regenerate.
1408 * dvp.opc.c: Nicely format opcode tables.
1409 (vu_operands): New element UFLAGS.
1410 (parse_uflags,print_uflags): New functions.
1411 (vu_upper_opcodes): Add UFLAGS to all insns.
1414 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1416 Fix rac to accept only a0:
1417 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1418 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1419 Introduce OPERAND_GPR.
1420 * d10v-dis.c (print_operand): Likewise.
1422 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1424 * cgen-opc.in: New file.
1425 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1426 * Makefile.am (CGENFILES): Add cgen-opc.in.
1427 * Makefile.in: Regenerate.
1429 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1430 (cgen_hw_lookup): Make result const.
1432 * cgen-dis.in (*): Use PTR instead of void *.
1433 (print_insn): Delete unused vars `i', `syntax'.
1435 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1438 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1440 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1441 (vif_opcodes): Update renamed insns.
1442 * dvp-dis.c (*): Likewise.
1445 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1447 * configure, aclocal.m4: Rebuild with new libtool.
1449 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1451 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1452 instructions use a PC relative branch, not absolute.
1454 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1456 * configure.in: Set libtool_enable_shared rather than
1457 libtool_shared. Remove diversion hack.
1458 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1460 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1462 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1463 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1465 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1467 * tic30-dis.c: New file.
1468 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1469 * configure.in: Handle bfd_tic30_arch.
1470 * Makefile.am: Rebuild dependencies.
1471 (CFILES): Add tic30-dis.c
1472 (ALL_MACHINES): Add tic30-dis.lo.
1473 * configure, Makefile.in: Rebuild.
1475 start-sanitize-m32rx
1476 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1478 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1479 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1480 macwhi-a and macwlo-a instructions.
1484 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1486 * dvp-opc.c, fixed encoding of a bunch of instructions to
1487 be consistent with the asmvu assembler (and inconsistent
1488 with the specification).
1490 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1492 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1493 in the opcode table. The pkemscalf instruction must come first.
1495 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1497 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1500 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1502 * m32r-opc.h (HAVE_CPU_M32R): Define.
1505 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1507 * dvp-dis.c, dvp-opc.c: New files.
1508 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1509 * configure: Regenerate.
1510 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1511 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1512 (mips-dis.lo): Compile with @archdefs@.
1513 * Makefile.in: Regenerate.
1514 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1515 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1518 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1520 * v850-opc.c (insertion routines): If both alignment and size is
1521 wrong then report this.
1523 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1525 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1526 Only recognize instructions for the current target_processor.
1528 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1530 * d10v-dis.c (PC_MASK): Correct value.
1531 (print_operand): If there's a reloc, don't calculate the
1532 address because they could be in different sections.
1534 start-sanitize-cygnus
1535 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1537 * cgen.sh: Rewrite to be like simulator's version.
1538 * Makefile.am (cgen): Update call to cgen.sh.
1539 * Makefile.in: Regenerate
1542 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1544 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1545 instruction after the 4650's "mul" instruction; nobody's using the
1546 4010 these days. If object files someday indicate which processor
1547 variant they're intended for, we can do a better job at this.
1549 start-sanitize-r5900
1550 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1552 * mips-opc.c (c.lt.s): Add r5900 variant.
1556 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1558 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1559 table provided entry size. Use CGEN_INSN_MNEMONIC.
1560 (cgen_parse_keyword): Rewrite.
1561 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1562 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1563 * cgen-opc.c: Clean up pass over `struct foo' usage.
1564 (cgen_keyword_lookup_value): Handle "" entry.
1565 (cgen_keyword_add): Likewise.
1566 start-sanitize-cygnus
1567 * Makefile.am: Add cgen support.
1568 * Makefile.in: Regenerate.
1569 * configure.in: Add cgen support.
1570 * configure: Regenerate.
1571 * aclocal.m4: Regenerate.
1572 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1575 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1577 * mips-opc.c: Add FP_D to s.d instruction flags.
1579 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1581 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1583 start-sanitize-tic80
1584 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1586 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1587 PC relative offset forms before the 15 bit forms. An assembler command
1588 line option now chooses the default.
1591 start-sanitize-r5900
1592 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1594 * mips-opc.c: Add many missing r5900 instructions.
1597 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1599 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1600 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1602 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1604 * configure: Only build libopcodes shared if --enable-shared's value
1605 was `yes', or was set to `*opcodes*'.
1606 * aclocal.m4: Likewise.
1607 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1608 original source of this bit of code. It's not clear what the best fix
1611 start-sanitize-r5900
1612 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1614 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1616 start-sanitize-tic80
1617 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1619 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1620 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1621 offset forms before the 15 bit forms, to default to the long forms.
1624 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1626 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1628 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1630 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1631 symbol if none is present.
1632 (print_insn_big_arm): Prevent examination of stored symbol if
1635 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1637 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1639 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1641 * disassemble.c: Remove disasm_symaddr() function.
1643 * arm-dis.c: Use info->symbol instead of info->flags to determine
1644 if disassmbly should be in Thumb or Arm mode.
1646 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1648 * arm-dis.c: Add support for disassembling Thumb opcodes.
1649 (print_insn_thumb): New function.
1651 * disassemble.c (disasm_symaddr): New function.
1653 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1654 (thumb_opcodes): Table of Thumb opcodes.
1656 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1658 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1660 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1661 and 'v' as operand types.
1663 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1665 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1666 <olivier.carmona@di.epfl.ch>.
1667 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1668 which has a two word opcode with a one word argument.
1670 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1672 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1673 unsigned, not signed.
1674 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1676 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1678 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1679 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1680 (ftrv): Slay the cut-and-paste monster.
1682 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1684 * d10v-dis.c (print_operand):
1685 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1687 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1689 * d10v-opc.c (OPERAND_FLAG): Split into:
1690 (OPERAND_FFLAG, OPERAND_CFLAG) .
1694 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1696 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1697 field for all INSN_MACRO's.
1698 * mips16-opc.c: same
1700 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1702 * mips-opc.c (sync,cache): These are 3900 insns.
1704 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1706 sh-opc.h (sh_table): Remove ftst/nan.
1708 start-sanitize-cygnus
1709 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1711 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1712 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1714 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1718 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1720 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1721 Add tx49 insns and configury.
1724 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1726 * mips-opc.c (ffc, ffs): Fix mask.
1728 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1730 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1733 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1735 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1736 start-sanitize-cygnus
1737 Added VR5400 instructions.
1738 (N5): New cpu-id macro.
1740 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1742 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1744 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1745 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1747 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1749 * v850-dis.c (disassemble): Replace // with /* ... */
1751 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1753 * sparc-opc.c: Add wr & rd for v9a asr's.
1754 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1755 (v9a_asr_reg_names): New variable.
1756 Patch from David Miller <davem@vger.rutgers.edu>.
1758 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1760 * sparc-opc.c (v9notv9a): New insn type.
1761 (IMPDEP): Move to the end to not conflict with edge8 et al.
1762 Patch from David Miller <davem@vger.rutgers.edu>.
1764 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1766 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1768 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1770 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1772 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1774 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1775 of disassemble_info structure to determine if an overlay address
1776 has a matching symbol in low memory.
1778 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1779 new symbol_at_address_func field in disassemble_info structure.
1781 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1783 * v850-opc.c (extract_d22): Use signed arithmatic.
1785 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1787 * mips-opc.c: Three op mult is not an ISA insn.
1789 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1791 * mips-opc.c: Fix formatting.
1793 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1795 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1796 than assuming that char is signed. Explicitly sign extend 16 bit
1797 values, rather than assuming that short is 16 bits.
1798 (OP_sI, OP_J, OP_DIR): Likewise.
1800 start-sanitize-v850e
1801 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1803 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1807 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1809 * v850-opc.c: Fix typo in comment.
1811 * v850-dis.c (disassemble): Add test of processor type when
1812 determining opcodes.
1814 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1816 * configure.in: Use a diversion to set enable_shared before the
1817 arguments are parsed.
1818 * configure: Rebuild.
1820 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1822 * m68k-opc.c (TBL1): Use ! rather than `.
1823 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1825 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1827 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1829 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1831 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1834 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1835 * aclocal.m4: Rebuild with new libtool.
1836 * configure: Rebuild.
1838 start-sanitize-v850e
1839 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1841 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1844 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1846 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1848 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1850 * v850-opc.c (v850_opcodes): Further rearrangements.
1852 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1854 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1856 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1858 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1861 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1863 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1865 * mips16-opc.c: Added mips16 sdbbp.
1868 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1870 * v850-opc.c: Initialise processors field of v850_opcode structure.
1872 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1874 Merge changes from Martin Hunt:
1876 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1878 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1879 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1880 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1882 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1884 * d30v-dis.c (print_insn): First operand of d*i (delayed
1885 branch) instructions is relative.
1887 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1888 (d30v_operand_table): Add IMM6S3 type.
1889 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1891 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1892 and cmp instructions.
1894 * d30v-opc.c: Correct entries for repeat*, and sat*.
1895 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1896 types. Correct several formats.
1898 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1900 * d30v-opc.c (pre_defined_registers): Change control registers.
1902 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1903 SHORT_C2. Manual was incorrect.
1905 * d30v-dis.c (lookup_opcode): Return value now indicates
1906 if an opcode has a short and a long form. Used for deciding
1907 to append a ".s" or ".l".
1908 (print_insn): Append a ".s" to an instruction if it is
1909 the short form and ".l" if it is a long form. Do not append
1910 anything if the instruction has only one possible size.
1912 * d30v-opc.c: Change mulx2h to require an even register.
1913 New form: SHORT_A2; a SHORT_A form that needs an even
1914 register as the first operand.
1916 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1917 instruction was not being disassembled if there were an odd
1918 number of instructions.
1920 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1922 start-sanitize-v850e
1923 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1925 * v850-dis.c (disassemble): Improved display of register lists.
1928 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1930 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1931 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1932 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1933 fandnot1s, fandnot2s.
1935 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1937 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1939 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1941 * cgen-asm.c (cgen_parse_address): New argument resultp.
1942 All callers updated.
1943 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1945 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1947 * mn10200-dis.c (disassemble): PC relative instructions are
1948 relative to the next instruction, not the current instruction.
1950 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1952 * v850-dis.c (disassemble): Only signed extend values that are not
1953 returned by extract functions.
1954 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1956 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1958 * v850-opc.c: Update comments. Remove use of
1959 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1961 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1963 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1965 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1967 * configure: Rebuilt with latest devo autoconf for NT support.
1969 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1971 * v850-dis.c (disassemble): Use curly brace syntax for register
1974 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1975 where r0 is being used as a destination register.
1977 start-sanitize-v850e
1978 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1980 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1983 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1985 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1986 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1987 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1988 Add insns to access SGR and DBR.
1989 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1991 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1993 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1995 start-sanitize-v850e
1996 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1998 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1999 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2002 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2004 * configure (cgen_files): Add support for v850e target.
2005 * configure.in (cgen_files): Add support for v850e target.
2007 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2009 * configure (cgen_files): Add support for v850ea target.
2010 * configure.in (cgen_files): Add support for v850ea target.
2013 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2015 * configure.in (bfd_arc_arch): Add.
2016 * configure: Rebuild.
2017 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2018 * Makefile.in: Rebuild.
2019 * arc-dis.c, arc-opc.c: New files.
2020 * disassemble.c (ARCH_all): Define ARCH_arc.
2021 (disassembler): Add ARC support.
2023 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2025 start-sanitize-v850e
2026 * v850-dis.c (disassemble): Add support for v850EA instructions.
2028 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2029 (v850_opcodes): Add v850EA instructions.
2031 * v850-dis.c (disassemble): Add support for v850E instructions.
2033 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2034 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2035 insert_spe, extract_spe): New Functions.
2036 (v850_opcodes): Add v850E instructions.
2039 * v850-opc.c: Reorganised and re-layed out to improve readability
2042 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * configure: Rebuild with autoconf 2.12.1.
2046 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2048 * aclocal.m4, configure: Rebuild with new automake patches.
2050 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2052 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2053 * acinclude.m4: Just include acinclude.m4 from BFD.
2054 * aclocal.m4, configure: Rebuild.
2056 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2058 * Makefile.am: New file, based on old Makefile.in.
2059 * acconfig.h: New file.
2060 * acinclude.m4: New file.
2061 * stamp-h.in: New file.
2062 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2063 Removed shared library handling; now handled by libtool. Replace
2064 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2065 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2066 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2067 handling in AC_OUTPUT.
2068 * dep-in.sed: Change .o to .lo.
2069 * Makefile.in: Now built with automake.
2070 * aclocal.m4: Now built with aclocal.
2071 * config.in, configure: Rebuild.
2073 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2075 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2077 start-sanitize-r5900
2078 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2080 * mips-opc.c: Fix coding of mtsa.
2083 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2085 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2087 * sparc-dis.c (sorted_opcodes): New static local.
2088 (struct opcode_hash): `opcode' is pointer to const element.
2089 (build_hash): First arg is now table of sorted pointers.
2090 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2091 (compare_opcodes): Update.
2093 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2095 * cgen-opc.c: #include <ctype.h>.
2096 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2097 Handle case insensitive hashing.
2098 (hash_keyword_value): Change type of `value' to unsigned int.
2100 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2102 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2103 precision FP, mark it as such. Likewise for double precision
2104 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2106 start-sanitize-r5900
2107 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2110 start-sanitize-r5900
2111 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2113 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2114 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2117 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2119 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2121 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2122 nesting depth when all the macros are expanded.
2124 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2126 * sparc-opc.c: The fcmp v9a instructions take an integer register
2127 as a destination, not a floating point register. From Christian
2128 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2130 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2132 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2133 syntax. From Roman Hodek
2134 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2136 * i386-dis.c (twobyte_has_modrm): Fix pand.
2138 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2140 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2142 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2144 * arm-dis.c: Add prototypes for arm_decode_shift and
2147 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2149 * mips-opc.c: Add r3900 insns.
2151 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2153 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2154 print delay slot instructions on the same line. When using a PC
2155 relative load, add a comment with the value being loaded if it can
2158 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2160 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2161 to pushS/popS for segment regs and byte constant so that
2162 pushw/popw printed when in 16 bit data mode.
2164 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2165 print cbtw, cwtd in 16 bit data mode.
2166 * i386-dis.c (putop): extra case W to support above.
2168 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2169 address size prefix in 16 bit address mode.
2171 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * sh-dis.c: Reindent. Rename local variable fprintf to
2176 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2178 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2180 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2182 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2184 * mips16-opc.c (mip16_opcodes): same.
2186 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2188 * m68k-opc.c (moveb): Change $d to %d.
2190 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2192 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2193 (twobyte_has_modrm): Likewise.
2195 (OP_MMX, OP_EM, OP_MS): New static functions.
2197 * i386-dis.c: Revert patch of April 4. The output now matches
2200 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2202 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2205 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2207 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2209 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2211 * Makefile.in (install): Depend upon installdirs.
2212 (installdirs): New target.
2214 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2216 From Thomas Graichen <graichen@rzpd.de>:
2217 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2218 * configure: Rebuild.
2220 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2222 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2223 Delete string{,s}.h support.
2225 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2227 * cgen-asm.c (cgen_parse_operand_fn): New global.
2228 (cgen_parse_{{,un}signed_integer,address}): Update call to
2229 cgen_parse_operand_fn.
2230 (cgen_init_parse_operand): New function.
2231 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2232 from cgen_asm_init_parse.
2233 (m32r_cgen_assemble_insn): New operand `errmsg'.
2234 Delete call to as_bad, return error message to caller.
2235 (m32r_cgen_asm_hash_keywords): #if 0 out.
2237 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2239 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2241 [case 'J']: Fix typo in register name.
2243 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2245 * configure.in: Substitute SHLIB_LIBS.
2246 * configure: Rebuild.
2247 * Makefile.in (SHLIB_LIBS): New variable.
2248 ($(SHLIB)): Use $(SHLIB_LIBS).
2250 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2252 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2254 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2256 * disassemble.c (disassembler): Handle m32r.
2258 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2260 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2261 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2262 * Makefile.in (CFILES): Add them.
2263 (ALL_MACHINES): Add them.
2264 (dependencies): Regenerate.
2265 * configure.in (cgen_files): New variable.
2266 (bfd_m32r_arch): Add entry.
2267 * configure: Regenerate.
2269 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2271 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2272 * configure: Rebuild.
2274 * Makefile.in: Rebuild dependencies.
2276 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2278 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2281 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2283 * Branched binutils 2.8.
2285 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2287 * m10200-dis.c: Rename from mn10200-dis.c.
2288 * m10200-opc.c: Rename from mn10200-opc.c.
2289 * m10300-dis.c: Rename from mn10300-dis.c
2290 * m10300-opc.c: Rename from mn10300-opc.c.
2291 * Makefile.in: Update accordingly.
2293 * mips16-opc.c: Add mul and dmul macros.
2295 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2297 * makefile.vms: Update CFLAGS, add clean target.
2299 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2301 * mips-opc.c: Add "wait". From Ralf Baechle
2302 <ralf@gnu.ai.mit.edu>.
2304 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2305 * configure, config.in: Rebuild.
2306 * sysdep.h: Include <stdlib.h> if it exists.
2307 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2309 * Makefile.in: Rebuild dependencies.
2311 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2313 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2314 Andrew Bray <andy@madhouse.demon.co.uk>.
2316 * mips-opc.c: Add cast when setting mips_opcodes.
2318 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2320 * v850-dis.c (disassemble): Fix sign extension problem.
2321 * v850-opc.c (extract_d*): Fix sign extension problems to make
2322 disassembly calculate branch offsets correctly.
2324 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2326 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2328 * mips-opc.c: Add dctr and dctw.
2330 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2332 * d30v-dis.c (print_insn): Change the way signed constants
2335 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2337 * Makefile.in (BFD_H): New variable.
2338 (HFILES): New variable.
2339 (CFILES): Add all C files.
2340 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2341 Delete old dependencies, and build new ones.
2342 * dep-in.sed: New file.
2344 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2346 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2348 start-sanitize-coldfire
2349 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2351 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2354 end-sanitize-coldfire
2355 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2357 * mn10200-opc.c: Change "trap" to "syscall".
2358 * mn10300-opc.c: Add new "syscall" instruction.
2360 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2362 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2363 mulul insns on the coldfire.
2365 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2367 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2368 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2369 (print_insn_little_arm): Likewise.
2371 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2373 Based on patches from H.J. Lu <hjl@lucon.org>:
2374 * i386-dis.c (fetch_data): Add prototype.
2375 * m68k-dis.c (fetch_data): Add prototype.
2376 (dummy_print_address): Add prototype. Make static.
2377 * ppc-opc.c (valid_bo): Add prototype.
2378 * sparc-dis.c (build_hash_table): Add prototype.
2379 (is_delayed_branch, compute_arch_mask): Add prototypes.
2380 (print_insn_sparc): Make several local variables const.
2381 (compare_opcodes): Change arguments to const PTR. Add prototype.
2382 * sparc-opc.c (arg): Change name field to be const.
2383 (lookup_name, lookup_value): Add prototypes. Change table and
2384 name parameters to be const.
2385 (sparc_encode_asi): Change name parameter to be const.
2386 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2387 (sparc_encode_sparclet_cpreg): Likewise.
2388 (sparc_decode_asi): Change return type to be const.
2389 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2390 (sparc_decode_sparclet_cpreg): Likewise.
2392 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2394 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2395 Solaris doesn't like the combined options, and the -f is
2397 (stamp-tshlink, install): Likewise.
2399 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2401 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2404 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2406 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2408 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2410 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2413 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2415 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2417 start-sanitize-tic80
2418 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2420 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2422 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2424 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2427 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2429 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2430 floatformat_to_double to make portable.
2431 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2434 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2436 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2437 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2439 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2441 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2442 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2444 start-sanitize-tic80
2445 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2447 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2448 (OFF_SL_BR_SCALED): ... to this, and added the flag
2449 TIC80_OPERAND_BASEREL to the flags word.
2450 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2454 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2456 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2457 Change mips_opcodes from const array to a pointer,
2458 and change bfd_mips_num_opcodes from const int to int,
2459 so that we can increase the size of the mips opcodes table
2462 start-sanitize-tic80
2463 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2465 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2466 store BITNUM values in the table in one's complement form
2467 to match behavior when assembler is given a raw numeric
2468 value for a BITNUM operand.
2469 * tic80-dis.c (print_operand_bitnum): Ditto.
2472 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2474 * d30v-opc.c: Removed references to FLAG_X.
2476 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2478 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2480 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2482 * Makefile.in: Added d30v object files.
2483 * configure: (bfd_d30v_arch) Rebuilt.
2484 * configure.in: (bfd_d30v_arch) Added new case.
2485 * d30v-dis.c: New file.
2486 * d30v-opc.c: New file.
2487 * disassemble.c (disassembler) Add entry for d30v.
2489 start-sanitize-tic80
2490 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2492 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2493 representations for the floating point BITNUM values.
2495 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2497 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2498 in the table in one's complement form, as they appear in the
2500 (tic80_symbol_to_value): Use macros to access predefined
2502 (tic80_value_to_symbol): Ditto.
2503 (tic80_next_predefined_symbol): New function.
2504 * tic80-dis.c (print_operand_bitnum): Remove code that did
2505 one's complement for BITNUM values.
2508 start-sanitize-r5900
2509 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2511 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2514 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2516 * makefile.vms: Remove 8 bit characters. Update to latest
2519 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2521 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2523 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2525 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2526 (IMM24_PCREL): Likewise.
2528 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2530 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2531 address for an extended PC relative instruction that is not a
2534 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2536 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2539 start-sanitize-tic80
2540 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2542 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2543 (tic80_opcodes): Sort entries so that long immediate forms
2544 come after short immediate forms, making it easier for
2545 assembler to select the right one for a given operand.
2548 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2550 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2552 (print_insn_mips16): Likewise.
2554 start-sanitize-r5900
2555 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2557 * mips-opc.c: add r5900.
2560 start-sanitize-tic80
2561 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2563 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2564 a symbol class that restricts translation to just that
2565 class (general register, condition code, etc).
2567 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2569 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2570 and REG_DEST_E for register operands that have to be
2571 an even numbered register. Add REG_FPA for operands that
2572 are one of the floating point accumulator registers.
2573 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2574 (tic80_opcodes): Change entries that need even numbered
2575 register operands to use the new operand table entries.
2576 Add "or" entries that are identical to "or.tt" entries.
2579 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2581 * mips16-opc.c: Add new cases of exit instruction for
2583 * mips-dis.c (print_mips16_insn_arg): Display floating point
2584 registers in operands of exit instruction. Print `$' before
2585 register names in operands of entry and exit instructions.
2587 start-sanitize-tic80
2588 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2590 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2591 pairs for all predefined symbols recognized by the assembler.
2592 Also used by the disassembling routines.
2593 (tic80_symbol_to_value): New function.
2594 (tic80_value_to_symbol): New function.
2595 * tic80-dis.c (print_operand_control_register,
2596 print_operand_condition_code, print_operand_bitnum):
2597 Remove private tables and use tic80_value_to_symbol function.
2600 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2602 * d10v-dis.c (print_operand): Change address printing
2603 to correctly handle PC wrapping. Fixes PR11490.
2605 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2607 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2610 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2612 * mips-dis.c (print_insn_mips16): Set insn_info information.
2613 (print_mips16_insn_arg): Likewise.
2615 * mips-dis.c (print_insn_mips16): Better handling of an extend
2616 opcode followed by an instruction which can not be extended.
2618 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2620 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2621 coldfire moveb instruction to not allow an address register as
2622 destination. Although the documentation does not indicate that
2623 this is invalid, experiments uncovered unexpected behavior.
2624 Added a comment explaining the situation. Thanks to Andreas
2625 Schwab for pointing this out to me.
2627 start-sanitize-tic80
2628 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2630 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2631 entries are presorted so that entries with the same mnemonic are
2632 adjacent to each other in the table. Sort the entries for each
2633 instruction so that this is true.
2636 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2638 * m68k-dis.c: Include <libiberty.h>.
2639 (print_insn_m68k): Sort the opcode table on the most significant
2640 nibble of the opcode.
2642 start-sanitize-tic80
2643 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2645 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2646 "vsub", "vst", "xnor", and "xor" instructions.
2647 (V_a1): Renamed from V_a, msb of accumulator reg number.
2648 (V_a0): Add macro, lsb of accumulator reg number.
2650 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2652 * tic80-dis.c (print_insn_tic80): Broke excessively long
2653 function up into several smaller ones and arranged for
2654 the instruction printing function to be callable recursively
2655 to print vector instructions that have both a load and a
2656 math instruction packed into a single opcode.
2657 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2658 to explain why it comes after the other vector opcodes.
2661 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2663 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2664 move insns to handle immediate operands.
2666 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2668 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2669 fix operand mask in the "moveml" entries for the coldfire.
2671 start-sanitize-tic80
2672 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2674 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2675 New macros for building vector instruction opcodes.
2676 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2677 FMT_LI, which were unused. The field is now a flags field.
2678 Remove some opcodes that are possible, but illegal, such
2679 as long immediate instructions with doubles for immediate
2680 values. Add "vadd" and "vld" instructions.
2682 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2684 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2685 the order more logical. Move the shift alias instructions ("rotl",
2686 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2687 interspersed with the regular sr.x and sl.x instructions. Add
2688 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2689 "sub", "subu", "swcr", and "trap".
2691 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2693 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2694 (OFF_SL_PC): Renamed from OFF_SL.
2695 (OFF_SS_BR): New operand type for base relative operand.
2696 (OFF_SL_BR): New operand type for base relative operand.
2697 (REG_BASE): New operand type for base register operand.
2698 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2699 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2700 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2702 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2703 10 char field, padded with spaces on rhs, rather than a string
2704 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2705 than old TIC80_OPERAND_RELATIVE. Add support for new
2706 TIC80_OPERAND_BASEREL flag bit.
2708 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2710 * tic80-dis.c (print_insn_tic80): Print floating point operands
2712 * tic80-opc.c (SPFI): Add single precision floating point
2713 immediate operand type.
2714 (ROTATE): Add rotate operand type for shifts.
2715 (ENDMASK): Add for shifts.
2716 (n): Macro for the 'n' bit.
2717 (i): Macro for the 'i' bit.
2718 (PD): Macro for the 'PD' field.
2719 (P2): Macro for the 'P2' field.
2720 (P1): Macro for the 'P1' field.
2721 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2725 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2727 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2728 adding in current address for pc-relative operands.
2730 start-sanitize-tic80
2731 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2733 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2734 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2735 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2736 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2737 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2738 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2739 (REG_SCALED, LSI_SCALED): New operand types.
2740 (E): New macro for 'E' bit at bit 27.
2741 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2742 opcodes, including the various size flavors (b,h,w,d) for
2743 the direct load and store instructions.
2745 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2747 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2749 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2750 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2751 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2752 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2753 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2754 masks with "MASK_* & ~M_*" to get the M bit reset.
2755 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2757 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2759 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2760 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2761 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2763 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2764 CC, SICR, and LICR table entries.
2765 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2766 "bcnd", and "brcr" opcodes.
2769 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2771 * ppc-opc.c (powerpc_operands): Make comment match the
2772 actual fields (no shift field).
2773 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2774 start-sanitize-tic80
2775 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2776 partial implementation, work in progress.
2777 * tic80-opc.c (tic80_operands): Begin construction operands table.
2778 (tic80_opcodes): Continue populating opcodes table and start
2779 filling in the operand indices.
2780 (tic80_num_opcodes): Add this.
2783 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2785 * m68k-opc.c: Add #B case for moveq.
2787 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2789 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2790 before they are used.
2792 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2794 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2795 for "breakpoint" instruction.
2797 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2799 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2800 (dep): Use ALL_CFLAGS rather than CFLAGS.
2802 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2804 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2807 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2809 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2810 start-sanitize-tic80
2811 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2814 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2816 * mips16-opc.c: Add "abs".
2818 start-sanitize-tic80
2819 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2821 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2822 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2823 (disassembler): Add bfd_arch_tic80 support to set disassemble
2824 to print_insn_tic80.
2825 * tic80-dis.c (print_insn_tic80): Add stub.
2827 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2829 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2830 * configure: Regenerate with autoconf.
2831 * tic80-dis.c: Add file.
2832 * tic80-opc.c: Add file.
2835 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2837 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2839 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2841 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2842 (mn10200_opcodes): Use it for some logicals and btst insns.
2843 Add "break" and "trap" instructions.
2845 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2847 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2849 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2851 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2852 relative load or add now depends upon whether the instruction is
2855 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2857 * mn10200-dis.c: Finish writing disassembler.
2858 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2859 Fix mask for "jmp (an)".
2861 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2862 handle endianness issues for mn10300.
2864 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2866 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2868 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2869 instruction. Fix opcode field for "movb (imm24),dn".
2871 * mn10200-opc.c (mn10200_operands): Fix insertion position
2874 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2876 * mn10200-opc.c: Create mn10200 opcode table.
2877 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2878 but moving along nicely.
2880 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2882 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2884 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2886 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2887 specifiers for fmovem* instructions.
2889 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2891 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2893 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2895 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2898 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2900 * mn10300-opc.c: Add some comments explaining the various
2903 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2905 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2907 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2910 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2911 operand specifiers in fmovm* instructions.
2913 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2915 * ppc-opc.c (insert_li): Give an error if the offset has the two
2916 least significant bits set.
2918 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2920 * mips-dis.c (print_insn_mips16): Separate the instruction from
2921 the arguments with a tab, not a space.
2923 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2925 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2928 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2931 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2933 * configure: Rebuild with autoconf 2.12.
2935 Add support for mips16 (16 bit MIPS implementation):
2936 * mips16-opc.c: New file.
2937 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2938 (mips16_reg_names): New static array.
2939 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2940 after seeing a 16 bit symbol.
2941 (print_insn_little_mips): Likewise.
2942 (print_insn_mips16): New static function.
2943 (print_mips16_insn_arg): New static function.
2944 * mips-opc.c: Add jalx instruction.
2945 * Makefile.in (mips16-opc.o): New target.
2946 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2947 * configure: Rebuild.
2949 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2951 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2952 operand specifiers in *save, *restore and movem* instructions.
2954 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2957 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2958 register operands for immediate arithmetic, not, neg, negx, and
2959 set according to condition instructions.
2961 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2962 specifier of the effective-address operand in immediate forms of
2963 arithmetic instructions. The specifier for the immediate operand
2964 notes how and where the constant will be stored.
2966 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2968 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2971 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2974 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2976 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2978 * mn10300-dis.c (disassemble): Handle register lists.
2980 * mn10300-opc.c: Fix handling of register list operand for
2981 "call", "ret", and "rets" instructions.
2983 * mn10300-dis.c (disassemble): Print PC-relative and memory
2984 addresses symbolically if possible.
2985 * mn10300-opc.c: Distinguish between absolute memory addresses,
2986 pc-relative offsets & random immediates.
2988 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2990 (disassemble): Handle SPLIT and EXTENDED operands.
2992 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10300-dis.c: Rough cut at printing some operands.
2996 * mn10300-dis.c: Start working on disassembler support.
2997 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2999 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3001 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3003 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3005 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3007 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3009 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3010 register argument is calls and jmp instructions.
3012 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3014 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3015 getx operand. Fix opcode for mulqu imm,dn.
3017 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3019 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3020 in MN10300_OPERAND_SPLIT operands for how many bits
3021 appear in the basic insn word. Add IMM32_HIGH24,
3022 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3023 (mn10300_opcodes): Use new operands as needed.
3025 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3026 for bset, bclr, btst instructions.
3027 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3029 * mn10300-opc.c (mn10300_operands): Remove many redundant
3030 operands. Update opcode table as appropriate.
3031 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3032 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3034 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3036 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3037 operands (for indexed load/stores). Fix bitpos for DI
3038 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3039 few instructions that insert immediates/displacements in the
3040 middle of the instruction. Add IMM8E for 8 bit immediate in
3041 the extended part of an instruction.
3042 (mn10300_operands): Use new opcodes as appropriate.
3044 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3046 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3047 sequential so the assembler never parallelizes it with
3050 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3052 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3053 a data/address register that appears in register field 0
3054 and register field 1.
3055 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3057 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3059 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3060 standard disassembly.
3062 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3063 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3064 Recategorize PALcode instructions.
3066 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3068 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3070 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3072 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3073 there are no operand types.
3075 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3077 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3079 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3081 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3083 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3085 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3087 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3088 and sst.w instructions.
3090 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3093 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3095 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3098 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3100 * ppc-opc.c (PPCPWR2): Define.
3101 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3104 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3106 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3107 field for movhu instruction.
3109 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3110 cast value to "long" not "signed long" to keep hpux10
3113 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3115 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3118 * mn10300-opc.c (FMT*): Remove definitions.
3120 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3121 for shift-by-register opcodes.
3123 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3124 into [AD][MN][01] for encoding the position of the register
3127 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3129 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3130 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3132 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3134 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3135 Fix various typos. Add "PAREN" operand.
3136 (MEM, MEM2): Define.
3137 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3138 operands. Fix several typos.
3140 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3143 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3145 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3146 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3148 (mn10300_opcodes): Break opcode format out into its own field.
3149 Update many operand fields to deal with signed vs unsigned
3150 issues. Fix one or two typos in the "mov" instruction
3151 opcode, mask and/or operand fields.
3153 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3155 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3156 m68851 wasn't reset.
3158 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3160 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3161 all opcodes. Very rough cut at operands for all opcodes.
3163 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3166 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3168 * mn10200-opc.c, mn10300-opc.c: New files.
3169 * mn10200-dis.c, mn10300-dis.c: New files.
3170 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3171 * disassemble.c: Break mn10x00 support into 10200 and 10300
3173 * configure.in: Likewise.
3174 * configure: Rebuilt.
3176 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3178 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3180 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3182 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3184 * disassemble (ARCH_mn10x00): Define.
3185 (disassembler): Handle bfd_arch_mn10x00.
3186 * configure.in: Recognize bfd_mn10x00_arch.
3187 * configure: Rebuilt.
3189 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3191 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3192 accordingly. Don't declare functions using op_rtn.
3194 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3196 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3197 params to be more standard.
3198 * (disassemble): Print absolute addresses and symbolic names for
3199 branch and jump targets.
3200 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3202 * (v850_opcodes): Add breakpoint insn.
3204 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3206 * m68k-opc.c: Move the fmovemx data register cases before the
3207 other cases, so that they get recognized before the data register
3208 does gets treated as a degenerate register list.
3210 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * mips-opc.c: Add a case for "div" and "divu" with two registers
3213 and a destination of $0.
3215 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3217 * mips-dis.c (print_insn_arg): Add prototype.
3218 (_print_insn_mips): Ditto.
3220 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3222 * mips-dis.c (print_insn_arg): Print condition code registers as
3225 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3227 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3229 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3231 * v850-dis.c (disassemble): Make static. Provide prototype.
3233 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3235 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3238 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3240 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3241 ']' characters into the output stream.
3242 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3243 Add "memop" field to all opcodes (for the disassembler).
3244 Reorder opcodes so that "nop" comes before "mov" and "jr"
3245 comes before "jarl".
3247 * v850-dis.c (print_insn_v850): Fix typo in last change.
3249 * v850-dis.c (print_insn_v850): Properly handle disassembling
3250 a two byte insn at the end of a memory region when the memory
3251 region's size is only two byte aligned.
3253 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3255 * v850-dis.c (v850_reg_names): Define.
3256 (v850_sreg_names, v850_cc_names): Likewise.
3257 (disassemble): Very rough cut at printing operands (unformatted).
3259 * v850-opc.c (BOP_MASK): Fix.
3260 (v850_opcodes): Fix mask for jarl and jr.
3262 * v850-dis.c: New file. Skeleton for disassembler support.
3263 * Makefile.in Remove v850 references, they're not needed here.
3264 * configure.in: Add v850-dis.o when building v850 toolchains.
3265 * configure: Rebuilt.
3266 * disassemble.c (disassembler): Call v850 disassembler.
3268 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3269 (insert_d8_6, extract_d8_6): New functions.
3270 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3271 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3273 (IF4A, IF4B): Use "D7" instead of "D7S".
3274 (IF4C, IF4D): Use "D8_7" instead of "D8".
3275 (IF4E, IF4F): New. Use "D8_6".
3276 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3277 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3279 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3280 (v850_operands): Change D16 to D16_15, use special insert/extract
3281 routines. New new D16 that uses the generic insert/extract code.
3282 (IF7A, IF7B): Use D16_15.
3283 (IF7C, IF7D): New. Use D16.
3284 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3286 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3287 message. Issue an error if the branch offset is odd.
3289 * v850-opc.c: Add notes about needing special insert/extract
3290 for all the load/store insns, except "ld.b" and "st.b".
3292 * v850-opc.c (insert_d22, extract_d22): New functions.
3293 (v850_operands): Use insert_d22 and extract_d22 for
3295 (insert_d9): Fix range check.
3297 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3299 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3300 and set bits field to D9 and D22 operands.
3302 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3304 * v850-opc.c (v850_operands): Define SR2 operand.
3305 (v850_opcodes): "ldsr" uses R1,SR2.
3307 * v850-opc.c (v850_opcodes): Fix opcode specs for
3308 sld.w, sst.b, sst.h, sst.w, and nop.
3310 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3312 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3313 end of the opcode table.
3315 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3317 * d10v-opc.c (pre_defined_registers): Added register pairs,
3318 "r0-r1", "r2-r3", etc.
3320 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3322 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3323 Create I16U for an unsigned 16bit mmediate operand.
3324 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3326 * v850-opc.c (v850_operands): Define EP operand.
3327 (IF4A, IF4B, IF4C, IF4D): Use EP.
3329 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3330 with immediate operand, "movhi". Tweak "ldsr".
3332 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3333 correct. Get sld.[bhw] and sst.[bhw] closer.
3335 * v850-opc.c (v850_operands): "not" is a two byte insn
3337 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3339 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3341 * v850-opc.c (two): Get order of words correct.
3343 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3345 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3346 register source and destination operands.
3347 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3349 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3350 same thinko in "trap" opcode.
3352 * v850-opc.c (v850_opcodes): Add initializer for size field
3355 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3356 Add D8 for 8-bit unsigned field in short load/store insns.
3357 (IF4A, IF4D): These both need two registers.
3358 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3359 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3360 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3361 for "ldsr" and "stsr".
3362 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3365 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3366 short store word (sst.w).
3368 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3370 * v850-opc.c (v850_operands): Added insert and extract fields,
3371 pointers to functions that handle unusual operand encodings.
3373 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3375 * v850-opc.c (v850_opcodes): Enable "trap".
3377 * v850-opc.c (v850_opcodes): Fix order of displacement
3378 and register for "set1", "clr1", "not1", and "tst1".
3380 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3382 * v850-opc.c (v850_operands): Add "B3" support.
3383 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3386 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3388 * v850-opc.c: Close unterminated comment.
3390 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3392 * v850-opc.c (v850_operands): Add flags field.
3393 (v850_opcodes): add move opcodes.
3395 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3397 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3398 * configure: (bfd_v850v_arch) Add new case.
3399 * configure.in: (bfd_v850_arch) Add new case.
3400 * v850-opc.c: New file.
3402 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3404 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3406 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3408 * d10v-opc.c: Add additional information to the opcode
3409 table to help determinine which instructions can be done
3412 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3414 * mpw-make.sed: Update editing of include pathnames to be
3417 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3419 * arm-opc.h: Added "bx" instruction definition.
3421 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3423 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3425 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3427 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3429 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3431 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3433 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3435 * makefile.vms: Update for alpha-opc changes.
3437 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3439 * i386-dis.c (print_insn_i386): Actually return the correct value.
3440 (ONE, OP_ONE): #ifdef out; not used.
3442 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3444 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3445 Changed subi operand type to treat 0 as 16.
3447 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3449 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3452 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3454 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3455 memory transfer instructions. Add new format string entries %h and %s.
3456 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3459 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3461 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3462 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3464 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * alpha-dis.c (print_insn_alpha_osf): Remove.
3467 (print_insn_alpha_vms): Remove.
3468 (print_insn_alpha): Make globally visible. Chose the register
3469 names based on info->flavour.
3470 * disassemble.c: Always return print_insn_alpha for the alpha.
3472 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3474 * d10v-dis.c (dis_long): Handle unknown opcodes.
3476 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3478 * d10v-opc.c: Changes to support signed and unsigned numbers.
3479 All instructions with the same name that have long and short forms
3480 now end in ".l" or ".s". Divs added.
3481 * d10v-dis.c: Changes to support signed and unsigned numbers.
3483 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3485 * d10v-dis.c: Change all functions to use info->print_address_func.
3487 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3489 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3490 move ccr/sr insns more strict so that the disassembler only
3491 selects them when the addressing mode is data register.
3493 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3494 * d10v-opc.c (pre_defined_registers): Declare.
3495 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3496 to pick a better name for the registers.
3498 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3501 operands for fexpand and fpmerge. From Christian Kuehnke
3502 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3504 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3506 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3507 print routine. Take new regnames and cpumask arguments.
3508 Kill the environment variable nonsense.
3509 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3510 (print_insn_alpha_vms): New function. Do VMS style regnames.
3511 * disassemble.c (disassembler): Test bfd flavour to pick
3512 between OSF and VMS routines. Default to OSF.
3514 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3517 * configure: Rebuild.
3518 * Makefile.in (install): Use @INSTALL_SHLIB@.
3520 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3522 * configure: (bfd_d10v_arch) Add new case.
3523 * configure.in: (bfd_d10v_arch) Add new case.
3524 * d10v-dis.c: New file.
3525 * d10v-opc.c: New file.
3526 * disassemble.c (disassembler) Add entry for d10v.
3528 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3530 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3531 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3533 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3535 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3536 distinguish between variants of the instruction set.
3537 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3538 distinguish between variants of the instruction set.
3540 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3542 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3543 the 8086 instruction set.
3544 * i386-dis.c: General cleanups. Make most things static. Add
3545 prototypes. Get rid of static variables aflags and dflags. Pass
3546 them as args (to almost everything).
3548 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3550 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3552 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3554 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3555 if the next arg is marked with SRC_IN_DST. Gross.
3557 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3558 we're looking for and find EXR.
3560 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3561 if we're looking for KBIT and we don't find it.
3563 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3566 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3567 3bit immediate operands.
3569 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3571 * Released binutils 2.7.
3573 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3574 <kkaempf@progis.ac-net.de>.
3576 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3580 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3582 * sparc-dis.c (print_insn_sparclite): New routine to print
3583 sparclite instructions.
3585 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3587 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3589 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3591 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3592 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3593 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3595 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3597 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3598 Use autoconf-set values.
3599 (docdir, oldincludedir): Removed.
3600 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3602 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3604 * alpha-opc.c: New file.
3605 * alpha-opc.h: Remove.
3606 * alpha-dis.c: Complete rewrite to use new opcode table.
3607 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3608 * configure: Rebuild with autoconf 2.10.
3609 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3610 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3612 (alpha-opc.o): New target.
3614 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3616 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3617 Set imm_added_to_rs1 even if the source and destination register
3620 * sparc-opc.c: Add some two operand forms of the wr instruction.
3622 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3624 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3627 * disassemble.c (disassembler): Handle H8/S.
3628 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3630 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3632 * sparc-opc.c: Add beq/teq as aliases for be/te.
3634 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3635 <sergei@msil.sps.mot.com>.
3637 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3639 * makefile.vms: New file.
3641 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3643 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3645 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3648 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3650 * i386-dis.c (OP_OFF): Call append_prefix.
3652 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3654 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3655 unsigned long to silence a warning from the Solaris PowerPC
3658 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3660 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3662 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3664 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3666 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3667 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3668 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3669 cpush, cpusha, cpull sparclet insns.
3671 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3673 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3675 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3677 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3678 Set F_FLOAT on other floating point instructions.
3680 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3682 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3684 (powerpc_opcodes): Add 860/821 specific SPRs.
3686 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3688 * configure.in: Permit --enable-shared to specify a list of
3689 directories. Set and substitute BFD_PICLIST.
3690 * configure: Rebuild.
3691 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3692 uses. Set to @BFD_PICLIST@.
3694 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3696 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3697 not "abs", which may be needed for the absolute in something
3698 like btst #0,@10:8. Print L_3 immediates separately from other
3699 immediates. Change ABSMOV reference to ABS8MEM.
3701 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3703 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3704 (current_arch_mask): New static global.
3705 (compute_arch_mask): New static function.
3706 (print_insn_sparc): Delete sparc_v9_p. New static local
3707 current_mach. Resort opcode table if current_mach changes.
3708 Generalize "insn not supported" test.
3709 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3710 Delete test for v9/!v9.
3711 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3713 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3714 (brfcx): Renamed to FBRX.
3715 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3716 coprocessor mnemonics are not supported on the sparclet).
3717 (condf): Renamed to CONDF.
3718 (SLCBCC2): Delete F_ALIAS flag.
3720 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3722 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3723 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3725 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3727 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3728 that the shared library version number is set correctly.
3730 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3732 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3733 Miles Bader <miles@gnu.ai.mit.edu>.
3734 * configure: Rebuild.
3736 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3738 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3741 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3743 * configure: Rebuild with autoconf 2.8.
3745 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3747 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3748 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3750 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3752 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3753 since they appear as targets in Makefile.in.
3754 * configure: Rebuild.
3756 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3758 * mpw-make.sed: Edit out shared library support bits.
3760 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3762 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3763 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3764 (sparc_opcodes): Add sparclet insns.
3765 (sparclet_cpreg_table): New static local.
3766 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3767 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3769 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3771 * i386-dis.c (index16): New static variable.
3772 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3774 (OP_indirE): Return result of OP_E.
3775 (OP_E): Check for 16 bit addressing mode, and disassemble
3776 correctly. Optimised 32 bit case a little. Don't print
3777 "(base,index,scale)" when sib specifies only an offset.
3779 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3781 * configure.in: Set and substitute SHLIB_DEP.
3782 * configure: Rebuild.
3783 * Makefile.in (SHLIB_DEP): New variable.
3784 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3785 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3786 COMMON_SHLIB, add them to piclist with appropriate modifications.
3787 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3788 here: just use piclist.
3790 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3792 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3793 (print_insn_sparc): Rewrite v9/not-v9 tests.
3794 (compare_opcodes): Likewise.
3795 * sparc-opc.c (MASK_<ARCH>): Define.
3796 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3797 (sparclet,v6notv9): Define.
3798 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3799 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3801 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3803 * configure.in: Call AC_PROG_CC before configure.host.
3804 * configure: Rebuild.
3806 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3808 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3810 * i386-dis.c (onebyte_has_modrm): New static array.
3811 (twobyte_has_modrm): New static array.
3812 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3814 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3816 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3819 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3821 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3824 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3826 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3827 m68010up, not just m68020up | cpu32.
3829 * Makefile.in (SONAME): New variable.
3830 ($(SHLINK)): Make a link to the transformed name, as well.
3831 (stamp-tshlink): New target.
3832 (install): Skip stamp-tshlink during install.
3834 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3836 * configure.in: Call AC_ARG_PROGRAM.
3837 * configure: Rebuild.
3838 * Makefile.in (program_transform_name): New variable.
3839 (install): Transform library name before installing it.
3841 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3843 * i960-dis.c (mem): Add HX dcinva instruction.
3845 Support for building as a shared library, based on patches from
3846 Alan Modra <alan@spri.levels.unisa.edu.au>:
3847 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3848 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3849 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3850 * configure: Rebuild.
3851 * Makefile.in (ALLLIBS): New variable.
3852 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3853 (COMMON_SHLIB, SHLINK): New variables.
3854 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3855 (STAGESTUFF): Remove variable.
3856 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3857 (stamp-piclist, piclist): New targets.
3858 ($(SHLIB), $(SHLINK)): New targets.
3859 ($(OFILES)): Depend upon stamp-picdir.
3860 (disassemble.o): Build twice if PICFLAG is set.
3861 (MOSTLYCLEAN): Add pic/*.o.
3862 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3863 (distclean): Remove pic and stamp-picdir.
3864 (install): Install shared libraries.
3865 (stamp-picdir): New target.
3867 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3869 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3870 Print unknown instruction as "unknown", rather than in hex.
3872 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3874 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3876 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3878 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3880 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3882 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3883 when necessary. From Ulrich Drepper
3884 <drepper@myware.rz.uni-karlsruhe.de>.
3886 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3888 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3889 sparc_num_opcodes. Update architecture enum values.
3890 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3891 (sparc_opcode_lookup_arch): New function.
3892 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3893 (sparc_opcodes): Add v9a shutdown insn.
3895 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3897 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3898 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3900 (print_insn_sparc64): Deleted.
3901 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3904 * sparc-opc.c (architecture_pname): Add v9a.
3906 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3908 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3909 incorrectly defined as 0x16 when it should be 0x15.
3910 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3911 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3912 excb (exception barrier) which is defined in the Alpha
3913 Architecture Handbook version 2.
3914 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3915 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3916 disassembled as or, for example.
3918 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3920 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3921 (_print_insn_mips): Change i from int to unsigned int.
3923 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3925 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3926 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3928 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3930 * i386-dis.c: Added Pentium Pro instructions.
3932 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3934 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3937 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3939 * sh-opc.h (sh_nibble_type): Added REG_B.
3940 (sh_arg_type): Added A_REG_B.
3941 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3943 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3945 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3947 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3949 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3951 * Makefile.in (distclean): Remove stamp-h. From Ronald
3952 F. Guilmette <rfg@monkeys.com>.
3954 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3956 From David Mosberger-Tang <davidm@azstarnet.com>:
3957 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3960 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3962 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3963 (sh_table): Added many SH3 opcodes.
3964 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3966 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3968 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3969 (subco,subco.): Mark this PPC, not PPCCOM.
3971 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * configure: Rebuild with autoconf 2.7.
3975 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3977 * configure: Rebuild with autoconf 2.6.
3979 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3981 * configure.in: Sort list of architectures. Accept but do nothing
3982 for alliant, convex, pyramid, romp, and tahoe.
3984 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3986 * a29k-dis.c (print_special): Change num to unsigned int.
3988 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3990 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3993 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3995 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3996 * configure: Rebuilt.
3998 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4000 * configure.in: Add case for bfd_i860_arch.
4001 * configure: Rebuild.
4003 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4005 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4006 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4007 (NEXTDOUBLE): Likewise.
4008 (print_insn_m68k): Don't match fmoveml if there is more than one
4009 register in the list.
4010 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4012 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4014 * m68k-opc.c: Use #W rather than #w.
4015 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4017 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4019 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4020 and likewise for all the dbxx opcodes.
4022 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4024 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4026 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4028 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4029 the VR4100 specific instructions to the mips_opcodes structure.
4031 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4033 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4034 ugly Metrowerks bug in CW6, is fixed in CW7.
4036 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4038 * ppc-opc.c (whole file): Add flags for common/any support.
4040 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4042 * Makefile.in (BISON): Remove macro.
4043 (FLAGS_TO_PASS): Remove BISON.
4045 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4047 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4049 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4050 instructions that take no args by looking at the match mask.
4051 (print_insn_arg): Always print "%" before register names.
4052 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4053 [case '_']: Don't print "@#" before address.
4054 [case 'J']: Use "%s" as format string, not register name.
4055 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4057 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4059 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4062 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4064 From David Mosberger-Tang <davidm@azstarnet.com>
4066 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4067 (alpha_insn_set): added definitions for VAX floating point
4068 instructions (Unix compilers don't generate these, but handcoded
4069 assembly might still use them).
4071 * alpha-dis.c (print_insn_alpha): added support for disassembling
4072 the miscellaneous instructions in the Alpha instruction set.
4074 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4076 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4077 no longer create sysdep.h, sed ppc-opc.c to work around a
4078 serious Metrowerks C bug.
4079 * mpw-make.in: Remove.
4080 * mpw-make.sed: New file, used by mpw-configure to edit
4081 Makefile.in into an MPW makefile.
4083 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * Makefile.in (maintainer-clean): New synonym for realclean.
4087 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4089 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4090 which use '0', '1', and '2' instead. Specify the proper size for
4091 a pmove immediate operand. Correct the pmovefd patterns to be
4092 moves to a register, not from a register.
4093 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4095 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4097 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4098 %psr, %wim, %tbr as F_NOTV9.
4100 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * Makefile.in (Makefile): Just rebuild Makefile when running
4104 (config.h, stamp-h): New targets.
4105 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4106 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4107 rebuilding config.h.
4108 * configure: Rebuild.
4110 * mips-opc.c: Change unaligned loads and stores with "t,A"
4111 operands to use "t,A(b)".
4113 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4115 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4117 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4119 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4120 until 3 instead of until 2.
4122 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4124 * Makefile.in (ALL_CFLAGS): Define.
4125 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4126 (MOSTLYCLEAN): Add config.log.
4127 (distclean): Don't remove config.log.
4128 * configure.in: Substitute HDEFINES.
4129 * configure: Rebuild.
4131 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4133 * sh-opc.h (sh_arg_type): Add F_FR0.
4134 (sh_table, case fmac): Add F_FR0 as first argument.
4136 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4138 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4140 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4142 * sparc-dis.c: Remove all references to NO_V9.
4144 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4146 * aclocal.m4: Just include ../bfd/aclocal.m4.
4147 * configure: Rebuild.
4149 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4151 * sparc-dis.c (X_DISP19): Define.
4152 (print_insn, case 'G'): Use it.
4153 (print_insn, case 'L'): Sign extend displacement.
4155 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4157 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4158 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4159 host_makefile_frag or frags.
4160 * aclocal.m4: New file.
4161 * configure: Rebuild.
4162 * Makefile.in (INSTALL): Set to @INSTALL@.
4163 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4164 (INSTALL_DATA): Set to @INSTALL_DATA@.
4166 (AR_FLAGS): Set to rc rather than qc.
4167 (CC): Define as @CC@.
4168 (CFLAGS): Set to @CFLAGS@.
4169 (@host_makefile_frag@): Remove.
4170 (config.status): Remove dependency upon @frags@.
4172 * configure.in: ../bfd/config.bfd now just sets shell variables.
4173 Use them rather than looking through target Makefile fragments.
4174 * configure: Rebuild.
4176 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4178 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4180 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4182 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4183 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4186 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4187 (lookup_{name,value}): New functions.
4188 (prefetch_table): New static local.
4189 (sparc_{encode,decode}_prefetch): New functions.
4190 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4192 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4194 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4197 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-dis.c: Correct comment on first line of file.
4201 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4203 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4205 * sparc-opc.c (asi, membar): New static locals.
4206 (sparc_{encode,decode}_{asi,membar}): New functions.
4207 (sparc_opcodes, membar insn): Fix.
4208 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4209 Support decoding of membar masks.
4212 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4214 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4216 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4218 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4219 and likewise for the other branches. Add bhs as an alias for bcc,
4220 and likewise for the size variants. Add dbhs as an alias for
4223 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4225 * sh-opc.h (FP sts instructions): Update to match reality.
4227 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4229 * m68k-dis.c: (fpcr_names): Add % before all register names.
4230 (reg_names): Likewise.
4231 (print_insn_arg): Don't explicitly print % before register names.
4232 Add % before register names in static array names. In case 'r',
4233 print data registers as `@(Dn)', not `Dn@'. When printing a
4234 memory address, don't print @# before it.
4235 (print_indexed): Change base_disp and outer_disp from int to
4236 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4237 syntax. Sign extend 8 byte displacement correctly.
4238 (print_base): Print using MIT syntax. Print zpc when appropriate.
4239 Change parameter disp from int to bfd_vma.
4241 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4244 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4246 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4247 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4248 * sh-opc.h (sh_arg_type): Add new operand types.
4249 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4251 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4253 * Makefile.in (distclean): Remove generated file config.h.
4255 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4257 * Makefile.in (distclean): Remove generated file config.h.
4259 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4261 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4263 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4265 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4266 rather than numopcodes. Use m68k_opcodes rather than removed
4267 opcode function. Don't check F_ALIAS.
4268 (print_insn_arg): Change first parameter to be const char *.
4269 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4270 (m68k-opc.o): New target.
4271 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4272 * configure: Rebuild.
4274 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4276 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4277 (opcode_bits, opcode_hash_table): New variables.
4278 (opcodes_initialized): Renamed from opcodes_sorted.
4279 (build_hash_table): New function.
4280 (is_delayed_branch): Use hash table.
4281 (print_insn): Renamed from print_insn_sparc, made static.
4282 Build and use hash table. If !sparc64, ignore sparc64 insns,
4283 and vice-versa if sparc64.
4284 (print_insn_sparc, print_insn_sparc64): New functions.
4285 (compare_opcodes): Move sparc64 opcodes to end.
4286 Print commutative insns with constant second.
4287 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4289 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4291 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4292 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4293 avoids printing a delay slot in a delay slot.
4294 * sh-opc.h (sh_table): Fully bracket last entry.
4296 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4298 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4300 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4302 * configure.in: Get host_makefile_frag from ${srcdir}.
4304 * configure.in: Autoconfiscated. Check for string[s].h. Create
4305 config.h from config.in. Don't set up sysdep.h link.
4306 * sysdep.h: New file.
4307 * configure, config.in: New files, generated from configure.in.
4308 * Makefile.in: Updated to be processed autoconf-style.
4309 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4310 (Makefile): Depend on config.status.
4311 (config.status): New rule.
4312 * configure.bat: Update Makefile substitutions.
4314 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4316 * mips-opc.c (L1): Define.
4317 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4318 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4321 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4323 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4324 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4325 have multiple add units but only a single logical unit.
4327 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4328 shifted by 18, without any insertion or extraction function.
4329 (insert_cr, extract_cr): Remove.
4331 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4333 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4336 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4338 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4339 * sh-opc.h: Add copyright.
4341 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4343 * Makefile.in (crunch-m68k): Delete extra target accidentally
4344 checked in a while ago.
4346 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4348 * sh-opc.h (sh_table): Add SH3 support.
4350 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4352 * sh-opc.h: Added bsrf and braf.
4354 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4356 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4357 bogus [ls]fm{ea,fd} patterns.
4359 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4360 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4361 initialize it from memory. Make function static.
4362 (print_insn_{big,little}_arm): New functions.
4363 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4364 the correct endianness.
4366 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4368 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4371 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4373 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4374 17th, so that it builds again using GCC as the compiler.
4376 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4378 * mips-dis.c (print_insn_little_mips): Cast return value from
4379 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4380 expects an unsigned long, and that might be fewer words of
4381 argument storage (e.g., if bfd_vma is long long on a 32-bit
4383 (print_insn_big_mips): Likewise with bfd_getb32 value.
4384 (_print_insn_mips): Now static.
4386 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4388 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4389 gcc memory hog problem with initializer is fixed.
4391 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4393 Merge in support for Mac MPW as a host.
4394 (Old change descriptions retained for informational value.)
4396 * mpw-config.in (archname): Compute from the config.
4397 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4399 * mpw-config.in (target_arch): Compute from canonical target.
4400 (m68k, mips, powerpc, sparc): Add architectures.
4401 * mpw-make.in (disassemble.c.o): Add.
4402 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4404 * mpw-config.in (BFD_MACHINES): Set to a default value.
4405 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4407 * mpw-make.in (CSEARCH): Add extra-include to search path.
4409 * mpw-config.in (varargs.h): Don't create.
4410 (sysdep.h): Create using forward-include.
4411 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4413 * mpw-config.in: New file, MPW version of configure.in.
4414 * mpw-make.in: New file, MPW version of Makefile.in.
4416 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4418 * alpha-dis.c (print_insn_alpha): Put empty statement after
4421 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4423 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4424 (low_sign_extend): Likewise.
4425 (get_field): Delete unused function.
4426 (set_field, deposit_14, deposit_21): Likewise.
4428 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4430 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4433 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4435 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4437 * alpha-opc.h (OSF_ASMCODE): define
4438 print pal-code names as defined in App C of the
4439 Alpha Architecture Reference Manual
4441 * alpha-dis.c: cleaned up output
4442 print stylized code forms as defined in App A.4.3 of the
4443 Alpha Architecture Reference Manual
4445 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4447 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4449 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4452 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4454 * m68k-dis.c (opcode): New function. Returns address of opcode
4455 table entry given index, even if the opcode table was split to
4456 work around gcc bugs.
4457 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4459 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4460 (reg_names): Now const.
4461 (print_insn_arg): Arrays cacheFieldName and names now const.
4462 (print_indexed): Array scales now const.
4464 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4466 * ppc-opc.c: Sort recently added instructions by minor opcode
4467 number within major opcode number.
4469 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4471 * hppa-dis.c: Include libhppa.h.
4473 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4475 * mips-opc.c: Change dli to use M_DLI, and add dla.
4477 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4479 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4481 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4483 * mips-opc.c: Add r4650 mul instruction.
4485 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4487 * mips-opc.c: Add uld and usd macros for unaligned double load and
4490 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4492 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4493 mfdcr, mtdcr, icbt, iccci.
4495 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4497 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4498 signed char fields to shorts, more portable.
4500 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4502 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4503 char fields as signed chars, since they may have negative values.
4505 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4507 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4508 (mycroft@netbsd.org).
4510 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4512 From "Logg, Ed" <elogg@ea.com>:
4513 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4514 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4517 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4519 * ppc-opc.c: Changes based on patch from David Edelsohn
4520 <edelsohn@mhpcc.edu>.
4521 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4524 (insert_tbr): New static function.
4525 (extract_tbr): New static function.
4526 (XFXFXM_MASK, XFXM): Define.
4527 (XSPRBAT_MASK, XSPRG_MASK): Define.
4528 (powerpc_opcodes): Add instructions to access special registers by
4529 name. Add mtcr and mftbu.
4531 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4533 * mips-opc.c (P3): Define.
4534 (mips_opcodes): Add mad and madu.
4536 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4538 * configure.in: Add W65 support.
4539 * disassemble.c: Likewise.
4540 * w65-opc.h, w65-dis.c: New files.
4542 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4544 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4547 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4549 * mips-opc.c: Add dli as a synonym for li.
4551 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4553 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4554 print something for reserved opcode values, even if it won't
4557 * mips-dis.c (_print_insn_mips): When initializing, shift right
4558 and mask, to avoid sign extension problems on the Alpha.
4560 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4563 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4565 * sh-opc.h (mov.l gbr): Get direction right.
4566 * sh-dis.c (print_insn_shx): New function.
4567 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4568 print opcodes with right byte order.
4570 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4572 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4573 to avoid conflicts with getopt.
4575 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4577 * hppa-dis.c (print_insn_hppa): Read the instruction using
4578 bfd_getb32, so that it works on a little endian or 64 bit host.
4579 Remove unused local variable op.
4581 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4583 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4584 addu does not work correctly if -mips3.
4586 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4588 * a29k-dis.c (print_special): Add special register names defined
4589 on 29030, 29040 and 29050.
4590 (print_insn): Handle new operand type 'I'.
4592 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4594 * Makefile.in (INSTALL): Use top level install.sh script.
4596 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4598 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4599 that it works on a little endian host.
4601 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4603 * configure.in: Use ${config_shell} when running config.bfd.
4605 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4607 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4609 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4611 * a29k-dis.c (print_insn): Print the opcode.
4613 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4615 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4617 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4619 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4621 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4623 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4624 which store a value into memory.
4626 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4628 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4629 * arm-dis.c, arm-opc.h: New files.
4631 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4633 * Makefile.in (ns32k-dis.o): Add dependency.
4634 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4635 string, not as array of chars.
4637 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4639 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4641 * sparc-opc.c: Added sparclite extended FP operations, and
4642 versions of v9 impdep* instructions permitting specification of
4645 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4647 * i960-dis.c (reg_names): Now const.
4648 (struct sparse_tabent): New type, copied from array type in mem
4650 (ctrl): Local static array ctrl_tab now const.
4651 (cobr): Local static array cobr_tab now const.
4652 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4653 static variable mem_tab no longer explicitly initialized. Changed
4654 mem_init to const array of struct sparse_tabent.
4655 (reg): Local static variable reg_tab no longer explicitly
4656 initialized. Changed reg_init to const array of struct
4658 (ea): Local static array scale_tab now const.
4660 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4663 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4665 * configure.bat: the disassember needs to be enabled for
4666 "objdump -d" to work in djgpp.
4668 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4670 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4671 (invalid_float): Enabled general version, doesn't require running
4672 on ns32k host. Changed to take char* argument, and test for
4673 explicitly specified sizes, instead of using sizeof() on host CPU
4675 (INVALID_FLOAT): Cast first argument.
4676 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4677 list_P032, list_M032): Now const.
4678 (optlist, list_search): Made appropriate arguments now point to
4680 (print_insn_arg): Changed static array of one-character-string
4681 pointers into a static const array of characters; fixed sprintf
4682 statement accordingly.
4684 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4686 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4687 from distribution. A ns32k-dis.c from a previous distribution has
4688 been brought up to date and supports the new interface.
4690 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4692 * configure.in: add bfd_ns32k_arch target support.
4694 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4695 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4697 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4699 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4702 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4704 * h8300-dis.c, mips-dis.c: Don't use true and false.
4706 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4708 * configure.in: Change --with-targets to --enable-targets.
4710 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4712 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4713 opcodes to the first instruction with that opcode, to speed
4714 disassembly of large files. From ralphc@pyramid.com (Ralph
4717 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4719 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4721 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4723 * configure.bat: update to latest makefile.in
4725 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4727 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4728 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4729 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4730 slot insn is in a delay slot.
4731 * z8k-opc.h: (resflg): Fix patterns.
4732 * h8500-opc.h Fix CR insn patterns.
4734 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4736 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4737 "cmpl" before POWER versions, so that gas -many uses them.
4739 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4741 * disassemble.c: New file.
4742 * Makefile.in (OFILES): Add disassemble.o.
4743 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4744 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4745 binutils/configure.in.
4747 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4748 opcode being examined.
4750 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4752 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4753 (insert_ral, insert_ram, insert_ras): New functions.
4754 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4755 RAS for store with update.
4757 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4759 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4760 (edelsohn@npac.syr.edu).
4762 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4767 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4769 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4771 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * ppc-opc.c (powerpc_operands): The signedp field has been
4774 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4775 instead. Add new operand SISIGNOPT.
4776 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4777 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4778 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4781 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4783 * i386-dis.c (struct private): Renamed to dis_private. `private'
4784 is a reserved word for dynix cc.
4786 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4788 * configure.in: Change error message to refer to bfd/config.bfd
4789 rather than bfd/configure.in.
4791 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4793 * ppc-opc.c: Define POWER2 as short alias flag.
4794 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4797 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4799 * i960-dis.c (print_insn_i960): Don't read a second word for
4800 opcodes 0, 1, 2 and 3.
4802 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4806 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4808 * m68881-ext.c: Removed; no longer used.
4809 * Makefile.in: Changed accordingly.
4811 * m68k-dis.c (ext_format_68881): Don't declare.
4812 (print_insn_m68k): If an instruction uses place 'i', it uses at
4813 least four fixed bytes.
4814 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4815 extended float, convert to double using floatformat_to_double, not
4816 ieee_extended_to_double, and fetch the data before converting it.
4818 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4821 davidj@ICSI.Berkeley.EDU (David Johnson).
4823 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4826 PowerPC uses bdnz[l][a].
4828 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4830 * dis-buf.c, i386-dis.c: Include sysdep.h.
4832 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4836 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4837 by Motorola PowerPC 601 with PPC_OPCODE_601.
4838 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4839 Disassemble Motorola PowerPC 601 instructions as well as normal
4840 PowerPC instructions.
4842 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4844 * i960-dis.c (reg, mem): Just use a static array instead of
4847 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4849 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4850 condition name index if this is for a negated condition.
4852 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4853 Floating point format for 'H' operand is backwards from normal
4854 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4855 operands (fmpyadd and fmpysub), handle bizarre register
4856 translation correctly for single precision format.
4858 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4859 or 'I' operands if the next format specifier is 'M' (fcmp
4860 condition completer).
4862 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4865 single number giving a bitmask for the MB and ME fields of an M
4866 form instruction. Change NB to accept 32, and turn it into 0;
4867 also turn 0 into 32 when disassembling. Seperated SH from NB.
4868 (insert_mbe, extract_mbe): New functions.
4869 (insert_nb, extract_nb): New functions.
4870 (SC_MASK): Mask out SA and LK bits.
4871 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4872 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4873 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4874 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4875 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4876 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4877 (powerpc_macros): Define table of macro definitions.
4878 (powerpc_num_macros): Define.
4880 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4881 if PPC_OPERAND_NEXT is set.
4883 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4885 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4886 char. Retrieve contents using bfd_getl32 instead of shifting.
4888 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * ppc-opc.c: New file. Opcode table for PowerPC, including
4891 opcodes for POWER (RS/6000).
4892 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4893 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4894 (CFILES): Add ppc-dis.c.
4895 (ppc-dis.o, ppc-opc.o): New targets.
4896 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4898 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4900 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4901 No space before 'u', 'f', or 'N'.
4903 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4905 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4906 farther than we should.
4908 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4910 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4912 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4914 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4916 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4917 needs it, to prevent reading past the end of a section.
4919 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4921 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4922 Removed t,A case for la; always use t,A(b) case.
4924 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 From Ted Lemen <mellon@pepper.ncd.com>
4927 * mips-dis.c (print_insn_arg): Handle 'k'.
4928 * mips-opc.c: Make cache use k, not t.
4930 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4932 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4933 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4934 FLOAT_FORMAT_CODE to put out floating point register names.
4936 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4938 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4940 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4942 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4944 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4946 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4947 larger than 32. Moved dsxx32 variants first for disassembler.
4949 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4951 * z8kgen.c, z8k-opc.h: Add full lda information.
4953 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4955 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4956 movb instructions. Any necessary space will be emitted by
4957 the code to handle nullification completers.
4959 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4963 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4965 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4966 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4968 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4970 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4972 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4974 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4975 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4977 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4979 * m88k-dis.c (m88kdis): comment change. Remove space after
4981 (printop): handle new arg types DEC and XREG for m88110.
4983 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4985 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4986 type for absolute branch addresses. Delete special
4987 "ble" and "be" code in 'W' operand code.
4989 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4991 * mips-opc.c: Set hazard information correctly for branch
4992 likely instructions.
4994 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4996 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4997 info->fprintf_func for printing and info->print_address_func for
5000 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5002 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5004 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5006 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5007 Corrected second case of "b" for disassembler.
5009 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5011 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5012 to BFD swapping routines to correspond to BFD name changes.
5014 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5016 * mips-opc.c: Change div machine instruction to be z,s,t rather
5017 than s,t. Change div macro to be d,v,t rather than d,s,t.
5018 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5019 rem and remu which generates only the corresponding div
5020 instruction. This is for compatibility with the MIPS assembler,
5021 which only generates the simple machine instruction when an
5022 explicit destination of $0 is used.
5023 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5025 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5027 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5028 WR_31 hazard for bal, bgezal, bltzal.
5030 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5032 * hppa-dis.c (print_insn_hppa): Use print function
5033 from within the disassemble_info, not fprintf_filtered.
5035 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5037 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5038 Law, law@cs.utah.edu.)
5040 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5042 * mips-opc.c ("absu"): Removed.
5045 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5047 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5048 Changed hazard information to distinguish between memory load
5049 delays and coprocessor load delays.
5051 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5053 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5055 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5057 * configure.in: Don't pass cpu to config.bfd.
5059 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5061 * m88k-dis.c (m88kdis): Make class unsigned.
5063 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5065 * alpha-dis.c (print_insn_alpha): One branch format case was
5066 missing the instruction name.
5068 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5070 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5071 Add the arch-specific auxiliary files.
5072 (OFILES): Remove the arch-specific auxiliary files
5073 and use BFD_MACHINES instead of DIS_LIBS.
5074 * configure.in: Set BFD_MACHINES based on --with-targets option.
5076 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5078 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5081 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5083 * sparc-opc.c: Change CONST to const to deal with gcc
5084 -Dconst=__const -traditional.
5086 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5088 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5089 coprocessor instructions out of #if 0, and made them use new
5092 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5094 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5096 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5098 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5099 instruction, for use by the disassembler.
5101 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5102 hand-coded sign extensions that depended on 32-bit host ints.
5103 FIXME, we still depend on big-endian host bitfield ordering.
5104 (sparc_print_insn): Set the insn_info_valid field, and the
5105 other fields that describe the instruction being printed.
5107 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5109 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5110 `jmp' instead of just one of them.
5112 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5114 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5115 (fput_fp_reg_r): Renamed from fput_reg_r.
5116 (fput_fp_reg): New function.
5117 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5119 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5121 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5123 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5125 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5127 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5128 don't output a space.
5130 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5132 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5134 * mips-opc.c: New file, containing opcode table from
5135 ../include/opcode/mips.h.
5136 * Makefile.in: Add it.
5138 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5140 * m88k-dis.c: New file, moved in from gdb and changed to use the
5141 new dis-asm.h disassembler interface.
5142 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5143 (m88k-dis.o): New target.
5145 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5147 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5148 argument string const char * to correspond to opcode/mips.h.
5150 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5152 * mips-dis.c: Updated to account for name changes in new version
5154 * Makefile.in: Added header file dependencies.
5156 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5158 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5160 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5162 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5163 extend, rather than shifts.
5165 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5167 * Makefile.in: Undo 15 June change.
5169 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5171 * m68k-dis.c (print_insn_arg): Change return value to byte count
5173 * m68k-dis.c: Re-write to detect invalid operands before
5174 printing anything, so we can handle this the same way we
5175 handle invalid opcodes.
5177 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5179 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5181 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5183 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5186 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5188 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5190 * configure.in: Do make sysdep.h link.
5191 * Makefile.in: Search ../include. Don't search ../bfd.
5193 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5195 Changes from Jeff Law, law@cs.utah.edu:
5196 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5197 Do not print a space before the completers specified by
5200 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5202 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5203 defined, since gdb has been fixed.
5205 Changes from Jeff Law, law@cs.utah.edu:
5206 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5207 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5208 be a *disassemble_info, not a *FILE.
5209 * hppa-dis.c: Support 'd', '!', and 'a'.
5210 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5211 * hppa-dis.c: Delete cases which are no longer needed.
5213 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5215 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5217 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5219 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5222 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5224 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5225 * configure.in: No longer need to configure to get sysdep.h.
5227 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5229 * Patches from Jeffrey Law <law@cs.utah.edu>.
5230 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5231 templates for 1.1 FP computational instructions.
5233 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5235 * h8500-dis.c (print_insn_h8500): Address argument is type
5237 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5240 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5241 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5243 * sparc-dis.c (compare_opcodes): Move static declaration to
5246 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5248 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5249 instruction, remove unimp hack from 'l' argument.
5251 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5253 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5256 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5258 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5259 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5262 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5264 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5265 arrays of string pointers to 2-d arrays of chars, to save
5268 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5270 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5271 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5273 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5275 * hppa-dis.c: New file from Utah, adapted to new disassembler
5277 * Makefile.in: Include it.
5279 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5281 * sh-dis.c, sh-opc.h: New files.
5283 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5285 * alpha-dis.c, alpha-opc.h: New files.
5287 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5289 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5292 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5294 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5296 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5298 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5301 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5303 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5304 and double percent signs a few places.
5306 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5308 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5309 Use info->print_address_func not print_address.
5311 * dis-buf.c (generic_print_address): New function.
5313 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5315 * Makefile.in: Add sparc-dis.c.
5316 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5318 Add `add' instruction to the set that get checked
5319 for a preceding `sethi' in order to print an absolute address.
5320 * (print_insn): Disassembly prefers real instructions.
5321 (is_delayed_branch): Speed up.
5322 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5323 Still missing some float ops, and needs testing.
5324 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5325 F_ALIAS. Use printf, not fprintf, when not passing a file
5327 (compare_opcodes): Check that identical instructions have
5328 identical opcodes, complain otherwise.
5331 * Include reg_names.
5333 Use dis-asm.h/read_memory_func interface.
5335 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5337 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5338 deliberately return non-zero to setjmp from longjmp. Otherwise
5339 this code fails to compile.
5341 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5343 * m68k-dis.c: Fix prototype for fetch_arg().
5345 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5347 * dis-buf.c: New file, for new read_memory_func interface.
5348 Makefile.in (OFILES): Include it.
5349 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5350 Use new read_memory_func interface.
5352 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5354 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5355 * h8500-opc.h: Fix couple of opcodes.
5357 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5359 * Makefile.in: add dvi & installcheck targets
5361 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5363 * Makefile.in: Update for h8500-dis.c.
5365 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5367 * h8500-dis.c, h8500-opc.h: New files
5369 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5371 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5372 ../include/dis-asm.h.
5373 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5374 and ../gdb/m68k-pinsn.c).
5375 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5376 and ../gdb/i386-pinsn.c).
5377 * m68881-ext.c: New file. Moved definition of
5378 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5379 * Makefile.in: Adjust for new files.
5380 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5381 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5382 can be dis-assembled.
5384 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5386 * mips-dis.c (print_insn_arg): Now returns void.
5388 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5390 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5391 files that use the macros.
5393 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5395 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5396 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5397 (CFILES): Added mips-dis.c.
5399 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5401 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5402 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5404 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5406 * Makefile.in: Improve *clean rules.
5407 * configure.in: Allow a default host.
5409 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5411 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5412 files include other sysdep files
5414 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5416 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5418 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5420 * configure.in: For host support, use ../bfd/configure.host
5421 so it stays in sync with the ../bfd/hosts database.
5423 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5425 * configure.in: use cpu-vendor-os triple instead of nested cases
5427 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5429 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5430 *always* the wrong one.
5432 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5434 * z8kgen.c: added copyright info
5436 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5438 * z8k-dis.c (unparse_instr): prettier tabs
5439 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5441 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5443 * configure.in: Add ncr* configuration.
5444 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5445 picayune ANSI compilers happy.
5447 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5449 * configure.in (i386): Make i386 and i486 synonymous for now.
5450 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5452 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5454 * Makefile.in (install): Fix typo.
5456 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5458 * Makefile.in (make): Remove obsolete crud.
5459 (sparc-opc.o): Avoid Sun Make VPATH bug.
5461 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5463 * Makefile.in: since there are no SUBDIRS, remove rule and
5464 references of subdir_do.
5466 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5468 * Makefile.in (install): Get the library name right here too.
5469 Don't install bfd.h, since it's unrelated to this library. No
5470 subdirs to recurse into, either.
5471 (CFILES): The source file has a .c suffix, not .o.
5473 * sparc-opc.c: New file, moved from BFD.
5474 * Makefile.in (OFILES): Build it.
5476 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5478 * z8k-dis.c: fixed forward refferences of some declarations.
5480 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5482 * Makefile.in: get the name of the library right
5484 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5486 * z8k-dis.c: knows how to disassemble z8k stuff
5487 * z8k-opc.h: new file full of z8000 opcodes
5491 version-control: never