openocd_stlinkv2.cfg

   1 interface hla
   2 hla_layout stlink
   3 hla_device_desc "ST-LINK"
   4 hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b
   5 transport select hla_jtag
   6
   7 # this should be irlen=4
   8 jtag newtap libresoc tap -irlen 4 -irmask 0xf -ircapture 0xf -expected-id 0x000018ff
   9
  10 #set _TARGETNAME libresoc.tap
  11 #target create $_TARGETNAME.0 ppc64 -chain-position $_TARGETNAME -rtos hwthread
  12
  13 # Configure work area in on-chip SRAM
  14 #$_TARGETNAME.0 configure -work-area-phys 0x80000000 \
  15 #               -work-area-size 1000 -work-area-backup 0
  16