2 * yosys -- Yosys Open SYnthesis Suite
4 * Copyright (C) 2012 Clifford Wolf <clifford@clifford.at>
5 * Copyright (C) 2019 Eddie Hung <eddie@fpgeh.com>
7 * Permission to use, copy, modify, and/or distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
22 // Berkeley Logic Synthesis and Verification Group, ABC: A System for Sequential Synthesis and Verification
23 // http://www.eecs.berkeley.edu/~alanmi/abc/
25 #define ABC_COMMAND_LIB "strash; ifraig; scorr; dc2; dretime; strash; &get -n; &dch -f; &nf {D}; &put"
26 #define ABC_COMMAND_CTR "strash; ifraig; scorr; dc2; dretime; strash; &get -n; &dch -f; &nf {D}; &put; buffer; upsize {D}; dnsize {D}; stime -p"
27 //#define ABC_COMMAND_LUT "strash; ifraig; scorr; dc2; dretime; strash; dch -f; if; mfs2"
28 #define ABC_COMMAND_LUT "&st; &fraig; &scorr; &dc2; &retime; &dch -f; &if; &mfs"
29 #define ABC_COMMAND_SOP "strash; ifraig; scorr; dc2; dretime; strash; dch -f; cover {I} {P}"
30 #define ABC_COMMAND_DFL "strash; ifraig; scorr; dc2; dretime; strash; &get -n; &dch -f; &nf {D}; &put"
32 #define ABC_FAST_COMMAND_LIB "strash; dretime; map {D}"
33 #define ABC_FAST_COMMAND_CTR "strash; dretime; map {D}; buffer; upsize {D}; dnsize {D}; stime -p"
34 #define ABC_FAST_COMMAND_LUT "&st; &retime; &if"
35 #define ABC_FAST_COMMAND_SOP "strash; dretime; cover -I {I} -P {P}"
36 #define ABC_FAST_COMMAND_DFL "strash; dretime; map"
38 #include "kernel/register.h"
39 #include "kernel/sigtools.h"
40 #include "kernel/celltypes.h"
41 #include "kernel/cost.h"
42 #include "kernel/log.h"
55 #include "frontends/aiger/aigerparse.h"
58 extern "C" int Abc_RealMain(int argc
, char *argv
[]);
62 PRIVATE_NAMESPACE_BEGIN
71 RTLIL::Module
*module
;
72 std::map
<RTLIL::SigBit
, int> signal_map
;
73 std::map
<RTLIL::SigBit
, RTLIL::State
> signal_init
;
74 pool
<std::string
> enabled_gates
;
77 bool clk_polarity
, en_polarity
;
78 RTLIL::SigSpec clk_sig
, en_sig
;
79 dict
<int, std::string
> pi_map
, po_map
;
81 std::string
remap_name(RTLIL::IdString abc_name
)
83 std::stringstream sstr
;
84 sstr
<< "$abc$" << map_autoidx
<< "$" << abc_name
.substr(1);
88 void handle_loops(RTLIL::Design
*design
)
90 Pass::call(design
, "scc -set_attr abc_scc_id {}");
92 design
->selection_stack
.emplace_back(false);
93 RTLIL::Selection
& sel
= design
->selection_stack
.back();
95 // For every unique SCC found, (arbitrarily) find the first
96 // cell in the component, and select (and mark) all its output
98 pool
<RTLIL::Const
> ids_seen
;
99 for (auto cell
: module
->cells()) {
100 auto it
= cell
->attributes
.find("\\abc_scc_id");
101 if (it
!= cell
->attributes
.end()) {
102 auto r
= ids_seen
.insert(it
->second
);
104 for (const auto &c
: cell
->connections()) {
105 if (c
.second
.is_fully_const()) continue;
106 if (cell
->output(c
.first
)) {
107 SigBit b
= c
.second
.as_bit();
109 w
->set_bool_attribute("\\abc_scc_break");
110 sel
.select(module
, w
);
114 cell
->attributes
.erase(it
);
118 // Then cut those selected wires to expose them as new PO/PI
119 Pass::call(design
, "expose -cut -sep .abc");
121 design
->selection_stack
.pop_back();
124 std::string
add_echos_to_abc_cmd(std::string str
)
126 std::string new_str
, token
;
127 for (size_t i
= 0; i
< str
.size(); i
++) {
130 while (i
+1 < str
.size() && str
[i
+1] == ' ')
132 new_str
+= "echo + " + token
+ " " + token
+ " ";
137 if (!token
.empty()) {
138 if (!new_str
.empty())
139 new_str
+= "echo + " + token
+ "; ";
146 std::string
fold_abc_cmd(std::string str
)
148 std::string token
, new_str
= " ";
149 int char_counter
= 10;
151 for (size_t i
= 0; i
<= str
.size(); i
++) {
154 if (i
== str
.size() || str
[i
] == ';') {
155 if (char_counter
+ token
.size() > 75)
156 new_str
+= "\n ", char_counter
= 14;
157 new_str
+= token
, char_counter
+= token
.size();
165 std::string
replace_tempdir(std::string text
, std::string tempdir_name
, bool show_tempdir
)
171 size_t pos
= text
.find(tempdir_name
);
172 if (pos
== std::string::npos
)
174 text
= text
.substr(0, pos
) + "<abc-temp-dir>" + text
.substr(pos
+ GetSize(tempdir_name
));
177 std::string selfdir_name
= proc_self_dirname();
178 if (selfdir_name
!= "/") {
180 size_t pos
= text
.find(selfdir_name
);
181 if (pos
== std::string::npos
)
183 text
= text
.substr(0, pos
) + "<yosys-exe-dir>/" + text
.substr(pos
+ GetSize(selfdir_name
));
190 struct abc_output_filter
193 int escape_seq_state
;
195 std::string tempdir_name
;
198 abc_output_filter(std::string tempdir_name
, bool show_tempdir
) : tempdir_name(tempdir_name
), show_tempdir(show_tempdir
)
201 escape_seq_state
= 0;
204 void next_char(char ch
)
206 if (escape_seq_state
== 0 && ch
== '\033') {
207 escape_seq_state
= 1;
210 if (escape_seq_state
== 1) {
211 escape_seq_state
= ch
== '[' ? 2 : 0;
214 if (escape_seq_state
== 2) {
215 if ((ch
< '0' || '9' < ch
) && ch
!= ';')
216 escape_seq_state
= 0;
219 escape_seq_state
= 0;
225 log("ABC: %s\n", replace_tempdir(linebuf
, tempdir_name
, show_tempdir
).c_str());
226 got_cr
= false, linebuf
.clear();
230 got_cr
= false, linebuf
.clear();
234 void next_line(const std::string
&line
)
237 if (sscanf(line
.c_str(), "Start-point = pi%d. End-point = po%d.", &pi
, &po
) == 2) {
238 log("ABC: Start-point = pi%d (%s). End-point = po%d (%s).\n",
239 pi
, pi_map
.count(pi
) ? pi_map
.at(pi
).c_str() : "???",
240 po
, po_map
.count(po
) ? po_map
.at(po
).c_str() : "???");
249 static std::pair
<RTLIL::IdString
, int> wideports_split(std::string name
)
253 if (name
.empty() || name
.back() != ']')
256 for (int i
= 0; i
+1 < GetSize(name
); i
++) {
259 else if (name
[i
] < '0' || name
[i
] > '9')
261 else if (i
== pos
+1 && name
[i
] == '0' && name
[i
+1] != ']')
266 return std::pair
<RTLIL::IdString
, int>(RTLIL::escape_id(name
.substr(0, pos
)), atoi(name
.c_str() + pos
+1));
269 return std::pair
<RTLIL::IdString
, int>(name
, 0);
272 void abc9_module(RTLIL::Design
*design
, RTLIL::Module
*current_module
, std::string script_file
, std::string exe_file
,
273 std::string liberty_file
, std::string constr_file
, bool cleanup
, vector
<int> lut_costs
, bool dff_mode
, std::string clk_str
,
274 bool keepff
, std::string delay_target
, std::string sop_inputs
, std::string sop_products
, std::string lutin_shared
, bool fast_mode
,
275 const std::vector
<RTLIL::Cell
*> &cells
, bool show_tempdir
, bool sop_mode
)
277 module
= current_module
;
278 map_autoidx
= autoidx
++;
283 recover_init
= false;
288 clk_sig
= RTLIL::SigSpec();
291 en_sig
= RTLIL::SigSpec();
294 if (!clk_str
.empty() && clk_str
!= "$")
296 if (clk_str
.find(',') != std::string::npos
) {
297 int pos
= clk_str
.find(',');
298 std::string en_str
= clk_str
.substr(pos
+1);
299 clk_str
= clk_str
.substr(0, pos
);
300 if (en_str
[0] == '!') {
302 en_str
= en_str
.substr(1);
304 if (module
->wires_
.count(RTLIL::escape_id(en_str
)) != 0)
305 en_sig
= assign_map(RTLIL::SigSpec(module
->wires_
.at(RTLIL::escape_id(en_str
)), 0));
307 if (clk_str
[0] == '!') {
308 clk_polarity
= false;
309 clk_str
= clk_str
.substr(1);
311 if (module
->wires_
.count(RTLIL::escape_id(clk_str
)) != 0)
312 clk_sig
= assign_map(RTLIL::SigSpec(module
->wires_
.at(RTLIL::escape_id(clk_str
)), 0));
315 if (dff_mode
&& clk_sig
.empty())
316 log_cmd_error("Clock domain %s not found.\n", clk_str
.c_str());
318 std::string tempdir_name
= "/tmp/yosys-abc-XXXXXX";
320 tempdir_name
[0] = tempdir_name
[4] = '_';
321 tempdir_name
= make_temp_dir(tempdir_name
);
322 log_header(design
, "Extracting gate netlist of module `%s' to `%s/input.aig'..\n",
323 module
->name
.c_str(), replace_tempdir(tempdir_name
, tempdir_name
, show_tempdir
).c_str());
325 std::string abc_script
= stringf("read %s/input.aig; &get -n; ", tempdir_name
.c_str());
327 if (!liberty_file
.empty()) {
328 abc_script
+= stringf("read_lib -w %s; ", liberty_file
.c_str());
329 if (!constr_file
.empty())
330 abc_script
+= stringf("read_constr -v %s; ", constr_file
.c_str());
332 if (!lut_costs
.empty())
333 abc_script
+= stringf("read_lut %s/lutdefs.txt; ", tempdir_name
.c_str());
335 abc_script
+= stringf("read_library %s/stdcells.genlib; ", tempdir_name
.c_str());
337 if (!script_file
.empty()) {
338 if (script_file
[0] == '+') {
339 for (size_t i
= 1; i
< script_file
.size(); i
++)
340 if (script_file
[i
] == '\'')
341 abc_script
+= "'\\''";
342 else if (script_file
[i
] == ',')
345 abc_script
+= script_file
[i
];
347 abc_script
+= stringf("source %s", script_file
.c_str());
348 } else if (!lut_costs
.empty()) {
349 bool all_luts_cost_same
= true;
350 for (int this_cost
: lut_costs
)
351 if (this_cost
!= lut_costs
.front())
352 all_luts_cost_same
= false;
353 abc_script
+= fast_mode
? ABC_FAST_COMMAND_LUT
: ABC_COMMAND_LUT
;
354 //if (all_luts_cost_same && !fast_mode)
355 // abc_script += "; lutpack {S}";
356 } else if (!liberty_file
.empty())
357 abc_script
+= constr_file
.empty() ? (fast_mode
? ABC_FAST_COMMAND_LIB
: ABC_COMMAND_LIB
) : (fast_mode
? ABC_FAST_COMMAND_CTR
: ABC_COMMAND_CTR
);
359 abc_script
+= fast_mode
? ABC_FAST_COMMAND_SOP
: ABC_COMMAND_SOP
;
361 abc_script
+= fast_mode
? ABC_FAST_COMMAND_DFL
: ABC_COMMAND_DFL
;
363 if (script_file
.empty() && !delay_target
.empty())
364 for (size_t pos
= abc_script
.find("dretime;"); pos
!= std::string::npos
; pos
= abc_script
.find("dretime;", pos
+1))
365 abc_script
= abc_script
.substr(0, pos
) + "dretime; retime -o {D};" + abc_script
.substr(pos
+8);
367 for (size_t pos
= abc_script
.find("{D}"); pos
!= std::string::npos
; pos
= abc_script
.find("{D}", pos
))
368 abc_script
= abc_script
.substr(0, pos
) + delay_target
+ abc_script
.substr(pos
+3);
370 for (size_t pos
= abc_script
.find("{I}"); pos
!= std::string::npos
; pos
= abc_script
.find("{D}", pos
))
371 abc_script
= abc_script
.substr(0, pos
) + sop_inputs
+ abc_script
.substr(pos
+3);
373 for (size_t pos
= abc_script
.find("{P}"); pos
!= std::string::npos
; pos
= abc_script
.find("{D}", pos
))
374 abc_script
= abc_script
.substr(0, pos
) + sop_products
+ abc_script
.substr(pos
+3);
376 for (size_t pos
= abc_script
.find("{S}"); pos
!= std::string::npos
; pos
= abc_script
.find("{S}", pos
))
377 abc_script
= abc_script
.substr(0, pos
) + lutin_shared
+ abc_script
.substr(pos
+3);
379 abc_script
+= stringf("; &write %s/output.aig", tempdir_name
.c_str());
380 abc_script
= add_echos_to_abc_cmd(abc_script
);
382 for (size_t i
= 0; i
+1 < abc_script
.size(); i
++)
383 if (abc_script
[i
] == ';' && abc_script
[i
+1] == ' ')
384 abc_script
[i
+1] = '\n';
386 FILE *f
= fopen(stringf("%s/abc.script", tempdir_name
.c_str()).c_str(), "wt");
387 fprintf(f
, "%s\n", abc_script
.c_str());
390 if (dff_mode
|| !clk_str
.empty())
392 if (clk_sig
.size() == 0)
393 log("No%s clock domain found. Not extracting any FF cells.\n", clk_str
.empty() ? "" : " matching");
395 log("Found%s %s clock domain: %s", clk_str
.empty() ? "" : " matching", clk_polarity
? "posedge" : "negedge", log_signal(clk_sig
));
396 if (en_sig
.size() != 0)
397 log(", enabled by %s%s", en_polarity
? "" : "!", log_signal(en_sig
));
402 design
->selection_stack
.emplace_back(false);
403 RTLIL::Selection
& sel
= design
->selection_stack
.back();
406 Pass::call(design
, "aigmap");
408 handle_loops(design
);
410 Pass::call(design
, stringf("write_xaiger -O -symbols %s/input.aig; ", tempdir_name
.c_str()));
412 design
->selection_stack
.pop_back();
414 // Now 'unexpose' those wires by undoing
415 // the expose operation -- remove them from PO/PI
416 // and re-connecting them back together
417 for (auto wire
: module
->wires()) {
418 auto it
= wire
->attributes
.find("\\abc_scc_break");
419 if (it
!= wire
->attributes
.end()) {
420 wire
->attributes
.erase(it
);
421 log_assert(wire
->port_output
);
422 wire
->port_output
= false;
423 RTLIL::Wire
*i_wire
= module
->wire(wire
->name
.str() + ".abci");
425 log_assert(i_wire
->port_input
);
426 i_wire
->port_input
= false;
427 module
->connect(i_wire
, wire
);
430 module
->fixup_ports();
432 //log("Extracted %d gates and %d wires to a netlist network with %d inputs and %d outputs.\n",
433 // count_gates, GetSize(signal_list), count_input, count_output);
437 //if (count_output > 0)
439 log_header(design
, "Executing ABC9.\n");
441 std::string buffer
= stringf("%s/stdcells.genlib", tempdir_name
.c_str());
442 f
= fopen(buffer
.c_str(), "wt");
444 log_error("Opening %s for writing failed: %s\n", buffer
.c_str(), strerror(errno
));
445 fprintf(f
, "GATE ZERO 1 Y=CONST0;\n");
446 fprintf(f
, "GATE ONE 1 Y=CONST1;\n");
447 fprintf(f
, "GATE BUF %d Y=A; PIN * NONINV 1 999 1 0 1 0\n", get_cell_cost("$_BUF_"));
448 fprintf(f
, "GATE NOT %d Y=!A; PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_NOT_"));
449 if (enabled_gates
.empty() || enabled_gates
.count("AND"))
450 fprintf(f
, "GATE AND %d Y=A*B; PIN * NONINV 1 999 1 0 1 0\n", get_cell_cost("$_AND_"));
451 if (enabled_gates
.empty() || enabled_gates
.count("NAND"))
452 fprintf(f
, "GATE NAND %d Y=!(A*B); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_NAND_"));
453 if (enabled_gates
.empty() || enabled_gates
.count("OR"))
454 fprintf(f
, "GATE OR %d Y=A+B; PIN * NONINV 1 999 1 0 1 0\n", get_cell_cost("$_OR_"));
455 if (enabled_gates
.empty() || enabled_gates
.count("NOR"))
456 fprintf(f
, "GATE NOR %d Y=!(A+B); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_NOR_"));
457 if (enabled_gates
.empty() || enabled_gates
.count("XOR"))
458 fprintf(f
, "GATE XOR %d Y=(A*!B)+(!A*B); PIN * UNKNOWN 1 999 1 0 1 0\n", get_cell_cost("$_XOR_"));
459 if (enabled_gates
.empty() || enabled_gates
.count("XNOR"))
460 fprintf(f
, "GATE XNOR %d Y=(A*B)+(!A*!B); PIN * UNKNOWN 1 999 1 0 1 0\n", get_cell_cost("$_XNOR_"));
461 if (enabled_gates
.empty() || enabled_gates
.count("ANDNOT"))
462 fprintf(f
, "GATE ANDNOT %d Y=A*!B; PIN * UNKNOWN 1 999 1 0 1 0\n", get_cell_cost("$_ANDNOT_"));
463 if (enabled_gates
.empty() || enabled_gates
.count("ORNOT"))
464 fprintf(f
, "GATE ORNOT %d Y=A+!B; PIN * UNKNOWN 1 999 1 0 1 0\n", get_cell_cost("$_ORNOT_"));
465 if (enabled_gates
.empty() || enabled_gates
.count("AOI3"))
466 fprintf(f
, "GATE AOI3 %d Y=!((A*B)+C); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_AOI3_"));
467 if (enabled_gates
.empty() || enabled_gates
.count("OAI3"))
468 fprintf(f
, "GATE OAI3 %d Y=!((A+B)*C); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_OAI3_"));
469 if (enabled_gates
.empty() || enabled_gates
.count("AOI4"))
470 fprintf(f
, "GATE AOI4 %d Y=!((A*B)+(C*D)); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_AOI4_"));
471 if (enabled_gates
.empty() || enabled_gates
.count("OAI4"))
472 fprintf(f
, "GATE OAI4 %d Y=!((A+B)*(C+D)); PIN * INV 1 999 1 0 1 0\n", get_cell_cost("$_OAI4_"));
473 if (enabled_gates
.empty() || enabled_gates
.count("MUX"))
474 fprintf(f
, "GATE MUX %d Y=(A*B)+(S*B)+(!S*A); PIN * UNKNOWN 1 999 1 0 1 0\n", get_cell_cost("$_MUX_"));
476 fprintf(f
, "GATE MUX4 %d Y=(!S*!T*A)+(S*!T*B)+(!S*T*C)+(S*T*D); PIN * UNKNOWN 1 999 1 0 1 0\n", 2*get_cell_cost("$_MUX_"));
478 fprintf(f
, "GATE MUX8 %d Y=(!S*!T*!U*A)+(S*!T*!U*B)+(!S*T*!U*C)+(S*T*!U*D)+(!S*!T*U*E)+(S*!T*U*F)+(!S*T*U*G)+(S*T*U*H); PIN * UNKNOWN 1 999 1 0 1 0\n", 4*get_cell_cost("$_MUX_"));
480 fprintf(f
, "GATE MUX16 %d Y=(!S*!T*!U*!V*A)+(S*!T*!U*!V*B)+(!S*T*!U*!V*C)+(S*T*!U*!V*D)+(!S*!T*U*!V*E)+(S*!T*U*!V*F)+(!S*T*U*!V*G)+(S*T*U*!V*H)+(!S*!T*!U*V*I)+(S*!T*!U*V*J)+(!S*T*!U*V*K)+(S*T*!U*V*L)+(!S*!T*U*V*M)+(S*!T*U*V*N)+(!S*T*U*V*O)+(S*T*U*V*P); PIN * UNKNOWN 1 999 1 0 1 0\n", 8*get_cell_cost("$_MUX_"));
483 if (!lut_costs
.empty()) {
484 buffer
= stringf("%s/lutdefs.txt", tempdir_name
.c_str());
485 f
= fopen(buffer
.c_str(), "wt");
487 log_error("Opening %s for writing failed: %s\n", buffer
.c_str(), strerror(errno
));
488 for (int i
= 0; i
< GetSize(lut_costs
); i
++)
489 fprintf(f
, "%d %d.00 1.00\n", i
+1, lut_costs
.at(i
));
493 buffer
= stringf("%s -s -f %s/abc.script 2>&1", exe_file
.c_str(), tempdir_name
.c_str());
494 log("Running ABC command: %s\n", replace_tempdir(buffer
, tempdir_name
, show_tempdir
).c_str());
496 #ifndef YOSYS_LINK_ABC
497 abc_output_filter
filt(tempdir_name
, show_tempdir
);
498 int ret
= run_command(buffer
, std::bind(&abc_output_filter::next_line
, filt
, std::placeholders::_1
));
500 // These needs to be mutable, supposedly due to getopt
502 string tmp_script_name
= stringf("%s/abc.script", tempdir_name
.c_str());
503 abc_argv
[0] = strdup(exe_file
.c_str());
504 abc_argv
[1] = strdup("-s");
505 abc_argv
[2] = strdup("-f");
506 abc_argv
[3] = strdup(tmp_script_name
.c_str());
508 int ret
= Abc_RealMain(4, abc_argv
);
515 log_error("ABC: execution of command \"%s\" failed: return code %d.\n", buffer
.c_str(), ret
);
517 buffer
= stringf("%s/%s", tempdir_name
.c_str(), "output.aig");
521 log_error("Can't open ABC output file `%s'.\n", buffer
.c_str());
523 bool builtin_lib
= liberty_file
.empty();
524 RTLIL::Design
*mapped_design
= new RTLIL::Design
;
525 //parse_blif(mapped_design, ifs, builtin_lib ? "\\DFF" : "\\_dff_", false, sop_mode);
526 AigerReader
reader(mapped_design
, ifs
, "\\netlist", "" /* clk_name */, "" /* map_filename */, true /* wideports */);
527 reader
.parse_xaiger();
531 log_header(design
, "Re-integrating ABC9 results.\n");
532 RTLIL::Module
*mapped_mod
= mapped_design
->modules_
["\\netlist"];
533 if (mapped_mod
== NULL
)
534 log_error("ABC output file does not contain a module `netlist'.\n");
536 pool
<RTLIL::SigBit
> output_bits
;
537 for (auto &it
: mapped_mod
->wires_
) {
538 RTLIL::Wire
*w
= it
.second
;
539 RTLIL::Wire
*remap_wire
= module
->addWire(remap_name(w
->name
), GetSize(w
));
540 if (markgroups
) remap_wire
->attributes
["\\abcgroup"] = map_autoidx
;
541 if (w
->port_output
) {
542 RTLIL::Wire
*wire
= module
->wire(w
->name
);
544 for (int i
= 0; i
< GetSize(wire
); i
++)
545 output_bits
.insert({wire
, i
});
548 if (w
->name
.str() == "\\__dummy_o__") {
549 log("Don't call ABC as there is nothing to map.\n");
553 // Attempt another wideports_split here because there
554 // exists the possibility that different bits of a port
555 // could be an input and output, therefore parse_xiager()
556 // could not combine it into a wideport
557 auto r
= wideports_split(w
->name
.str());
558 wire
= module
->wire(r
.first
);
561 output_bits
.insert({wire
, i
});
566 std::map
<std::string
, int> cell_stats
;
567 for (auto c
: mapped_mod
->cells())
571 if (c
->type
== "$_NOT_") {
573 RTLIL::SigBit a_bit
= c
->getPort("\\A").as_bit();
574 RTLIL::SigBit y_bit
= c
->getPort("\\Y").as_bit();
575 if (!lut_costs
.empty()) {
576 // ABC can return NOT gates that drive POs
577 if (a_bit
.wire
->port_input
) {
578 // If it's a NOT gate that comes from a primary input directly
579 // then implement it using a LUT
580 cell
= module
->addLut(remap_name(stringf("%s$lut", c
->name
.c_str())),
581 RTLIL::SigBit(module
->wires_
[remap_name(a_bit
.wire
->name
)], a_bit
.offset
),
582 RTLIL::SigBit(module
->wires_
[remap_name(y_bit
.wire
->name
)], y_bit
.offset
),
586 // Otherwise, clone the driving LUT to guarantee that we
587 // won't increase the max logic depth
588 // (TODO: Optimise by not cloning unless will increase depth)
589 RTLIL::IdString driver_name
;
590 if (GetSize(a_bit
.wire
) == 1)
591 driver_name
= stringf("%s$lut", a_bit
.wire
->name
.c_str());
593 driver_name
= stringf("%s[%d]$lut", a_bit
.wire
->name
.c_str(), a_bit
.offset
);
594 RTLIL::Cell
* driver
= mapped_mod
->cell(driver_name
);
596 auto driver_a
= driver
->getPort("\\A").chunks();
597 for (auto &chunk
: driver_a
)
598 chunk
.wire
= module
->wires_
[remap_name(chunk
.wire
->name
)];
599 RTLIL::Const driver_lut
= driver
->getParam("\\LUT");
600 for (auto &b
: driver_lut
.bits
) {
601 if (b
== RTLIL::State::S0
) b
= RTLIL::State::S1
;
602 else if (b
== RTLIL::State::S1
) b
= RTLIL::State::S0
;
604 cell
= module
->addLut(remap_name(stringf("%s$lut", c
->name
.c_str())),
606 RTLIL::SigBit(module
->wires_
[remap_name(y_bit
.wire
->name
)], y_bit
.offset
),
609 cell_stats
["$lut"]++;
612 cell
= module
->addCell(remap_name(c
->name
), "$_NOT_");
613 cell
->setPort("\\A", RTLIL::SigBit(module
->wires_
[remap_name(a_bit
.wire
->name
)], a_bit
.offset
));
614 cell
->setPort("\\Y", RTLIL::SigBit(module
->wires_
[remap_name(y_bit
.wire
->name
)], y_bit
.offset
));
615 cell_stats
[RTLIL::unescape_id(c
->type
)]++;
617 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
621 cell_stats
[RTLIL::unescape_id(c
->type
)]++;
622 if (c
->type
== "\\ZERO" || c
->type
== "\\ONE") {
624 conn
.first
= RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]);
625 conn
.second
= RTLIL::SigSpec(c
->type
== "\\ZERO" ? 0 : 1, 1);
626 module
->connect(conn
);
629 if (c
->type
== "\\BUF") {
631 conn
.first
= RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]);
632 conn
.second
= RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]);
633 module
->connect(conn
);
637 if (c
->type
== "\\AND" || c
->type
== "\\OR" || c
->type
== "\\XOR" || c
->type
== "\\NAND" || c
->type
== "\\NOR" ||
638 c
->type
== "\\XNOR" || c
->type
== "\\ANDNOT" || c
->type
== "\\ORNOT") {
639 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_" + c
->type
.substr(1) + "_");
640 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
641 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
642 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
643 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
646 if (c
->type
== "\\MUX") {
647 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_MUX_");
648 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
649 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
650 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
651 cell
->setPort("\\S", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\S").as_wire()->name
)]));
652 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
655 if (c
->type
== "\\MUX4") {
656 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_MUX4_");
657 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
658 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
659 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
660 cell
->setPort("\\C", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\C").as_wire()->name
)]));
661 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
662 cell
->setPort("\\S", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\S").as_wire()->name
)]));
663 cell
->setPort("\\T", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\T").as_wire()->name
)]));
664 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
667 if (c
->type
== "\\MUX8") {
668 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_MUX8_");
669 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
670 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
671 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
672 cell
->setPort("\\C", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\C").as_wire()->name
)]));
673 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
674 cell
->setPort("\\E", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\E").as_wire()->name
)]));
675 cell
->setPort("\\F", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\F").as_wire()->name
)]));
676 cell
->setPort("\\G", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\G").as_wire()->name
)]));
677 cell
->setPort("\\H", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\H").as_wire()->name
)]));
678 cell
->setPort("\\S", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\S").as_wire()->name
)]));
679 cell
->setPort("\\T", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\T").as_wire()->name
)]));
680 cell
->setPort("\\U", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\U").as_wire()->name
)]));
681 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
684 if (c
->type
== "\\MUX16") {
685 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_MUX16_");
686 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
687 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
688 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
689 cell
->setPort("\\C", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\C").as_wire()->name
)]));
690 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
691 cell
->setPort("\\E", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\E").as_wire()->name
)]));
692 cell
->setPort("\\F", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\F").as_wire()->name
)]));
693 cell
->setPort("\\G", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\G").as_wire()->name
)]));
694 cell
->setPort("\\H", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\H").as_wire()->name
)]));
695 cell
->setPort("\\I", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\I").as_wire()->name
)]));
696 cell
->setPort("\\J", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\J").as_wire()->name
)]));
697 cell
->setPort("\\K", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\K").as_wire()->name
)]));
698 cell
->setPort("\\L", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\L").as_wire()->name
)]));
699 cell
->setPort("\\M", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\M").as_wire()->name
)]));
700 cell
->setPort("\\N", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\N").as_wire()->name
)]));
701 cell
->setPort("\\O", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\O").as_wire()->name
)]));
702 cell
->setPort("\\P", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\P").as_wire()->name
)]));
703 cell
->setPort("\\S", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\S").as_wire()->name
)]));
704 cell
->setPort("\\T", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\T").as_wire()->name
)]));
705 cell
->setPort("\\U", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\U").as_wire()->name
)]));
706 cell
->setPort("\\V", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\V").as_wire()->name
)]));
707 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
710 if (c
->type
== "\\AOI3" || c
->type
== "\\OAI3") {
711 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_" + c
->type
.substr(1) + "_");
712 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
713 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
714 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
715 cell
->setPort("\\C", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\C").as_wire()->name
)]));
716 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
719 if (c
->type
== "\\AOI4" || c
->type
== "\\OAI4") {
720 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), "$_" + c
->type
.substr(1) + "_");
721 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
722 cell
->setPort("\\A", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)]));
723 cell
->setPort("\\B", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\B").as_wire()->name
)]));
724 cell
->setPort("\\C", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\C").as_wire()->name
)]));
725 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
726 cell
->setPort("\\Y", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)]));
729 if (c
->type
== "\\DFF") {
730 log_assert(clk_sig
.size() == 1);
732 if (en_sig
.size() == 0) {
733 cell
= module
->addCell(remap_name(c
->name
), clk_polarity
? "$_DFF_P_" : "$_DFF_N_");
735 log_assert(en_sig
.size() == 1);
736 cell
= module
->addCell(remap_name(c
->name
), stringf("$_DFFE_%c%c_", clk_polarity
? 'P' : 'N', en_polarity
? 'P' : 'N'));
737 cell
->setPort("\\E", en_sig
);
739 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
740 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
741 cell
->setPort("\\Q", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Q").as_wire()->name
)]));
742 cell
->setPort("\\C", clk_sig
);
747 cell_stats
[RTLIL::unescape_id(c
->type
)]++;
749 if (c
->type
== "\\_const0_" || c
->type
== "\\_const1_") {
751 conn
.first
= RTLIL::SigSpec(module
->wires_
[remap_name(c
->connections().begin()->second
.as_wire()->name
)]);
752 conn
.second
= RTLIL::SigSpec(c
->type
== "\\_const0_" ? 0 : 1, 1);
753 module
->connect(conn
);
757 if (c
->type
== "\\_dff_") {
758 log_assert(clk_sig
.size() == 1);
760 if (en_sig
.size() == 0) {
761 cell
= module
->addCell(remap_name(c
->name
), clk_polarity
? "$_DFF_P_" : "$_DFF_N_");
763 log_assert(en_sig
.size() == 1);
764 cell
= module
->addCell(remap_name(c
->name
), stringf("$_DFFE_%c%c_", clk_polarity
? 'P' : 'N', en_polarity
? 'P' : 'N'));
765 cell
->setPort("\\E", en_sig
);
767 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
768 cell
->setPort("\\D", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\D").as_wire()->name
)]));
769 cell
->setPort("\\Q", RTLIL::SigSpec(module
->wires_
[remap_name(c
->getPort("\\Q").as_wire()->name
)]));
770 cell
->setPort("\\C", clk_sig
);
774 if (c
->type
== "$lut" && GetSize(c
->getPort("\\A")) == 1 && c
->getParam("\\LUT").as_int() == 2) {
775 SigSpec my_a
= module
->wires_
[remap_name(c
->getPort("\\A").as_wire()->name
)];
776 SigSpec my_y
= module
->wires_
[remap_name(c
->getPort("\\Y").as_wire()->name
)];
777 module
->connect(my_y
, my_a
);
781 RTLIL::Cell
*cell
= module
->addCell(remap_name(c
->name
), c
->type
);
782 if (markgroups
) cell
->attributes
["\\abcgroup"] = map_autoidx
;
783 cell
->parameters
= c
->parameters
;
784 for (auto &conn
: c
->connections()) {
785 RTLIL::SigSpec newsig
;
786 for (auto c
: conn
.second
.chunks()) {
789 //log_assert(c.width == 1);
790 c
.wire
= module
->wires_
[remap_name(c
.wire
->name
)];
793 cell
->setPort(conn
.first
, newsig
);
797 // Copy connections (and rename) from mapped_mod to module
798 for (auto conn
: mapped_mod
->connections()) {
799 if (!conn
.first
.is_fully_const()) {
800 auto chunks
= conn
.first
.chunks();
801 for (auto &c
: chunks
)
802 c
.wire
= module
->wires_
[remap_name(c
.wire
->name
)];
803 conn
.first
= std::move(chunks
);
805 if (!conn
.second
.is_fully_const()) {
806 auto chunks
= conn
.second
.chunks();
807 for (auto &c
: chunks
)
809 c
.wire
= module
->wires_
[remap_name(c
.wire
->name
)];
810 conn
.second
= std::move(chunks
);
812 module
->connect(conn
);
816 for (auto wire
: mapped_mod
->wires()) {
817 if (wire
->attributes
.count("\\init")) {
818 Wire
*w
= module
->wires_
[remap_name(wire
->name
)];
819 log_assert(w
->attributes
.count("\\init") == 0);
820 w
->attributes
["\\init"] = wire
->attributes
.at("\\init");
824 for (auto &it
: cell_stats
)
825 log("ABC RESULTS: %15s cells: %8d\n", it
.first
.c_str(), it
.second
);
826 int in_wires
= 0, out_wires
= 0;
827 //for (auto &si : signal_list)
830 // snprintf(buffer, 100, "\\n%d", si.id);
831 // RTLIL::SigSig conn;
832 // if (si.type != G(NONE)) {
833 // conn.first = si.bit;
834 // conn.second = RTLIL::SigSpec(module->wires_[remap_name(buffer)]);
837 // conn.first = RTLIL::SigSpec(module->wires_[remap_name(buffer)]);
838 // conn.second = si.bit;
841 // module->connect(conn);
844 // Go through all AND and NOT output connections,
845 // and for those output ports driving wires
846 // also driven by mapped_mod, disconnect them
847 for (auto cell
: module
->cells()) {
848 if (!cell
->type
.in("$_AND_", "$_NOT_"))
850 for (auto &it
: cell
->connections_
) {
851 auto port_name
= it
.first
;
852 if (!cell
->output(port_name
)) continue;
853 auto &signal
= it
.second
;
854 auto bits
= signal
.bits();
856 if (output_bits
.count(b
))
857 b
= module
->addWire(NEW_ID
);
858 signal
= std::move(bits
);
861 // Do the same for module connections
862 for (auto &it
: module
->connections_
) {
863 auto &signal
= it
.first
;
864 auto bits
= signal
.bits();
866 if (output_bits
.count(b
))
867 b
= module
->addWire(NEW_ID
);
868 signal
= std::move(bits
);
871 // Stitch in mapped_mod's inputs/outputs into module
872 for (auto &it
: mapped_mod
->wires_
) {
873 RTLIL::Wire
*w
= it
.second
;
874 if (!w
->port_input
&& !w
->port_output
)
876 RTLIL::Wire
*wire
= module
->wire(w
->name
);
877 RTLIL::Wire
*remap_wire
= module
->wire(remap_name(w
->name
));
878 RTLIL::SigSpec signal
;
880 signal
= RTLIL::SigSpec(wire
, 0, GetSize(remap_wire
));
883 // Attempt another wideports_split here because there
884 // exists the possibility that different bits of a port
885 // could be an input and output, therefore parse_xiager()
886 // could not combine it into a wideport
887 auto r
= wideports_split(w
->name
.str());
888 wire
= module
->wire(r
.first
);
891 signal
= RTLIL::SigSpec(wire
, i
);
893 log_assert(GetSize(signal
) >= GetSize(remap_wire
));
895 log_assert(w
->port_input
|| w
->port_output
);
898 conn
.first
= remap_wire
;
899 conn
.second
= signal
;
901 module
->connect(conn
);
903 if (w
->port_output
) {
905 conn
.second
= remap_wire
;
907 module
->connect(conn
);
911 //log("ABC RESULTS: internal signals: %8d\n", int(signal_list.size()) - in_wires - out_wires);
912 log("ABC RESULTS: input signals: %8d\n", in_wires
);
913 log("ABC RESULTS: output signals: %8d\n", out_wires
);
915 delete mapped_design
;
919 // log("Don't call ABC as there is nothing to map.\n");
925 log("Removing temp directory.\n");
926 remove_directory(tempdir_name
);
932 struct Abc9Pass
: public Pass
{
933 Abc9Pass() : Pass("abc9", "use ABC for technology mapping") { }
934 void help() YS_OVERRIDE
936 // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
938 log(" abc9 [options] [selection]\n");
940 log("This pass uses the ABC tool [1] for technology mapping of yosys's internal gate\n");
941 log("library to a target architecture.\n");
943 log(" -exe <command>\n");
945 log(" use the specified command instead of \"" ABCEXTERNAL
"\" to execute ABC.\n");
947 log(" use the specified command instead of \"<yosys-bindir>/yosys-abc\" to execute ABC.\n");
949 log(" This can e.g. be used to call a specific version of ABC or a wrapper.\n");
951 log(" -script <file>\n");
952 log(" use the specified ABC script file instead of the default script.\n");
954 log(" if <file> starts with a plus sign (+), then the rest of the filename\n");
955 log(" string is interpreted as the command string to be passed to ABC. The\n");
956 log(" leading plus sign is removed and all commas (,) in the string are\n");
957 log(" replaced with blanks before the string is passed to ABC.\n");
959 log(" if no -script parameter is given, the following scripts are used:\n");
961 log(" for -liberty without -constr:\n");
962 log("%s\n", fold_abc_cmd(ABC_COMMAND_LIB
).c_str());
964 log(" for -liberty with -constr:\n");
965 log("%s\n", fold_abc_cmd(ABC_COMMAND_CTR
).c_str());
967 log(" for -lut/-luts (only one LUT size):\n");
968 log("%s\n", fold_abc_cmd(ABC_COMMAND_LUT
"; lutpack {S}").c_str());
970 log(" for -lut/-luts (different LUT sizes):\n");
971 log("%s\n", fold_abc_cmd(ABC_COMMAND_LUT
).c_str());
974 log("%s\n", fold_abc_cmd(ABC_COMMAND_SOP
).c_str());
976 log(" otherwise:\n");
977 log("%s\n", fold_abc_cmd(ABC_COMMAND_DFL
).c_str());
980 log(" use different default scripts that are slightly faster (at the cost\n");
981 log(" of output quality):\n");
983 log(" for -liberty without -constr:\n");
984 log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_LIB
).c_str());
986 log(" for -liberty with -constr:\n");
987 log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_CTR
).c_str());
989 log(" for -lut/-luts:\n");
990 log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_LUT
).c_str());
993 log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_SOP
).c_str());
995 log(" otherwise:\n");
996 log("%s\n", fold_abc_cmd(ABC_FAST_COMMAND_DFL
).c_str());
998 log(" -liberty <file>\n");
999 log(" generate netlists for the specified cell library (using the liberty\n");
1000 log(" file format).\n");
1002 log(" -constr <file>\n");
1003 log(" pass this file with timing constraints to ABC. use with -liberty.\n");
1005 log(" a constr file contains two lines:\n");
1006 log(" set_driving_cell <cell_name>\n");
1007 log(" set_load <floating_point_number>\n");
1009 log(" the set_driving_cell statement defines which cell type is assumed to\n");
1010 log(" drive the primary inputs and the set_load statement sets the load in\n");
1011 log(" femtofarads for each primary output.\n");
1013 log(" -D <picoseconds>\n");
1014 log(" set delay target. the string {D} in the default scripts above is\n");
1015 log(" replaced by this option when used, and an empty string otherwise.\n");
1016 log(" this also replaces 'dretime' with 'dretime; retime -o {D}' in the\n");
1017 log(" default scripts above.\n");
1020 log(" maximum number of SOP inputs.\n");
1021 log(" (replaces {I} in the default scripts above)\n");
1024 log(" maximum number of SOP products.\n");
1025 log(" (replaces {P} in the default scripts above)\n");
1028 log(" maximum number of LUT inputs shared.\n");
1029 log(" (replaces {S} in the default scripts above, default: -S 1)\n");
1031 log(" -lut <width>\n");
1032 log(" generate netlist using luts of (max) the specified width.\n");
1034 log(" -lut <w1>:<w2>\n");
1035 log(" generate netlist using luts of (max) the specified width <w2>. All\n");
1036 log(" luts with width <= <w1> have constant cost. for luts larger than <w1>\n");
1037 log(" the area cost doubles with each additional input bit. the delay cost\n");
1038 log(" is still constant for all lut widths.\n");
1040 log(" -luts <cost1>,<cost2>,<cost3>,<sizeN>:<cost4-N>,..\n");
1041 log(" generate netlist using luts. Use the specified costs for luts with 1,\n");
1042 log(" 2, 3, .. inputs.\n");
1045 log(" map to sum-of-product cells and inverters\n");
1047 // log(" -mux4, -mux8, -mux16\n");
1048 // log(" try to extract 4-input, 8-input, and/or 16-input muxes\n");
1049 // log(" (ignored when used with -liberty or -lut)\n");
1051 log(" -g type1,type2,...\n");
1052 log(" Map to the specified list of gate types. Supported gates types are:\n");
1053 log(" AND, NAND, OR, NOR, XOR, XNOR, ANDNOT, ORNOT, MUX, AOI3, OAI3, AOI4, OAI4.\n");
1054 log(" (The NOT gate is always added to this list automatically.)\n");
1056 log(" The following aliases can be used to reference common sets of gate types:\n");
1057 log(" simple: AND OR XOR MUX\n");
1058 log(" cmos2: NAND NOR\n");
1059 log(" cmos3: NAND NOR AOI3 OAI3\n");
1060 log(" cmos4: NAND NOR AOI3 OAI3 AOI4 OAI4\n");
1061 log(" gates: AND NAND OR NOR XOR XNOR ANDNOT ORNOT\n");
1062 log(" aig: AND NAND OR NOR ANDNOT ORNOT\n");
1064 log(" Prefix a gate type with a '-' to remove it from the list. For example\n");
1065 log(" the arguments 'AND,OR,XOR' and 'simple,-MUX' are equivalent.\n");
1068 log(" also pass $_DFF_?_ and $_DFFE_??_ cells through ABC. modules with many\n");
1069 log(" clock domains are automatically partitioned in clock domains and each\n");
1070 log(" domain is passed through ABC independently.\n");
1072 log(" -clk [!]<clock-signal-name>[,[!]<enable-signal-name>]\n");
1073 log(" use only the specified clock domain. this is like -dff, but only FF\n");
1074 log(" cells that belong to the specified clock domain are used.\n");
1077 log(" set the \"keep\" attribute on flip-flop output wires. (and thus preserve\n");
1078 log(" them, for example for equivalence checking.)\n");
1080 log(" -nocleanup\n");
1081 log(" when this option is used, the temporary files created by this pass\n");
1082 log(" are not removed. this is useful for debugging.\n");
1085 log(" print the temp dir name in log. usually this is suppressed so that the\n");
1086 log(" command output is identical across runs.\n");
1088 log(" -markgroups\n");
1089 log(" set a 'abcgroup' attribute on all objects created by ABC. The value of\n");
1090 log(" this attribute is a unique integer for each ABC process started. This\n");
1091 log(" is useful for debugging the partitioning of clock domains.\n");
1093 log("When neither -liberty nor -lut is used, the Yosys standard cell library is\n");
1094 log("loaded into ABC before the ABC script is executed.\n");
1096 log("Note that this is a logic optimization pass within Yosys that is calling ABC\n");
1097 log("internally. This is not going to \"run ABC on your design\". It will instead run\n");
1098 log("ABC on logic snippets extracted from your design. You will not get any useful\n");
1099 log("output when passing an ABC script that writes a file. Instead write your full\n");
1100 log("design as BLIF file with write_blif and the load that into ABC externally if\n");
1101 log("you want to use ABC to convert your design into another format.\n");
1103 log("[1] http://www.eecs.berkeley.edu/~alanmi/abc/\n");
1106 void execute(std::vector
<std::string
> args
, RTLIL::Design
*design
) YS_OVERRIDE
1108 log_header(design
, "Executing ABC9 pass (technology mapping using ABC).\n");
1113 signal_init
.clear();
1118 std::string exe_file
= ABCEXTERNAL
;
1120 std::string exe_file
= proc_self_dirname() + "yosys-abc";
1122 std::string script_file
, liberty_file
, constr_file
, clk_str
;
1123 std::string delay_target
, sop_inputs
, sop_products
, lutin_shared
= "-S 1";
1124 bool fast_mode
= false, dff_mode
= false, keepff
= false, cleanup
= true;
1125 bool show_tempdir
= false, sop_mode
= false;
1126 vector
<int> lut_costs
;
1132 enabled_gates
.clear();
1136 if (!check_file_exists(exe_file
+ ".exe") && check_file_exists(proc_self_dirname() + "..\\yosys-abc.exe"))
1137 exe_file
= proc_self_dirname() + "..\\yosys-abc";
1142 char pwd
[PATH_MAX
];
1143 if (!getcwd(pwd
, sizeof(pwd
))) {
1144 log_cmd_error("getcwd failed: %s\n", strerror(errno
));
1147 for (argidx
= 1; argidx
< args
.size(); argidx
++) {
1148 std::string arg
= args
[argidx
];
1149 if (arg
== "-exe" && argidx
+1 < args
.size()) {
1150 exe_file
= args
[++argidx
];
1153 if (arg
== "-script" && argidx
+1 < args
.size()) {
1154 script_file
= args
[++argidx
];
1155 rewrite_filename(script_file
);
1156 if (!script_file
.empty() && !is_absolute_path(script_file
) && script_file
[0] != '+')
1157 script_file
= std::string(pwd
) + "/" + script_file
;
1160 if (arg
== "-liberty" && argidx
+1 < args
.size()) {
1161 liberty_file
= args
[++argidx
];
1162 rewrite_filename(liberty_file
);
1163 if (!liberty_file
.empty() && !is_absolute_path(liberty_file
))
1164 liberty_file
= std::string(pwd
) + "/" + liberty_file
;
1167 if (arg
== "-constr" && argidx
+1 < args
.size()) {
1168 rewrite_filename(constr_file
);
1169 constr_file
= args
[++argidx
];
1170 if (!constr_file
.empty() && !is_absolute_path(constr_file
))
1171 constr_file
= std::string(pwd
) + "/" + constr_file
;
1174 if (arg
== "-D" && argidx
+1 < args
.size()) {
1175 delay_target
= "-D " + args
[++argidx
];
1178 if (arg
== "-I" && argidx
+1 < args
.size()) {
1179 sop_inputs
= "-I " + args
[++argidx
];
1182 if (arg
== "-P" && argidx
+1 < args
.size()) {
1183 sop_products
= "-P " + args
[++argidx
];
1186 if (arg
== "-S" && argidx
+1 < args
.size()) {
1187 lutin_shared
= "-S " + args
[++argidx
];
1190 if (arg
== "-lut" && argidx
+1 < args
.size()) {
1191 string arg
= args
[++argidx
];
1192 size_t pos
= arg
.find_first_of(':');
1193 int lut_mode
= 0, lut_mode2
= 0;
1194 if (pos
!= string::npos
) {
1195 lut_mode
= atoi(arg
.substr(0, pos
).c_str());
1196 lut_mode2
= atoi(arg
.substr(pos
+1).c_str());
1198 lut_mode
= atoi(arg
.c_str());
1199 lut_mode2
= lut_mode
;
1202 for (int i
= 0; i
< lut_mode
; i
++)
1203 lut_costs
.push_back(1);
1204 for (int i
= lut_mode
; i
< lut_mode2
; i
++)
1205 lut_costs
.push_back(2 << (i
- lut_mode
));
1208 if (arg
== "-luts" && argidx
+1 < args
.size()) {
1210 for (auto &tok
: split_tokens(args
[++argidx
], ",")) {
1211 auto parts
= split_tokens(tok
, ":");
1212 if (GetSize(parts
) == 0 && !lut_costs
.empty())
1213 lut_costs
.push_back(lut_costs
.back());
1214 else if (GetSize(parts
) == 1)
1215 lut_costs
.push_back(atoi(parts
.at(0).c_str()));
1216 else if (GetSize(parts
) == 2)
1217 while (GetSize(lut_costs
) < atoi(parts
.at(0).c_str()))
1218 lut_costs
.push_back(atoi(parts
.at(1).c_str()));
1220 log_cmd_error("Invalid -luts syntax.\n");
1224 if (arg
== "-sop") {
1228 if (arg
== "-mux4") {
1232 if (arg
== "-mux8") {
1236 if (arg
== "-mux16") {
1240 if (arg
== "-dress") {
1245 if (arg
== "-g" && argidx
+1 < args
.size()) {
1246 for (auto g
: split_tokens(args
[++argidx
], ",")) {
1247 vector
<string
> gate_list
;
1248 bool remove_gates
= false;
1249 if (GetSize(g
) > 0 && g
[0] == '-') {
1250 remove_gates
= true;
1253 if (g
== "AND") goto ok_gate
;
1254 if (g
== "NAND") goto ok_gate
;
1255 if (g
== "OR") goto ok_gate
;
1256 if (g
== "NOR") goto ok_gate
;
1257 if (g
== "XOR") goto ok_gate
;
1258 if (g
== "XNOR") goto ok_gate
;
1259 if (g
== "ANDNOT") goto ok_gate
;
1260 if (g
== "ORNOT") goto ok_gate
;
1261 if (g
== "MUX") goto ok_gate
;
1262 if (g
== "AOI3") goto ok_gate
;
1263 if (g
== "OAI3") goto ok_gate
;
1264 if (g
== "AOI4") goto ok_gate
;
1265 if (g
== "OAI4") goto ok_gate
;
1266 if (g
== "simple") {
1267 gate_list
.push_back("AND");
1268 gate_list
.push_back("OR");
1269 gate_list
.push_back("XOR");
1270 gate_list
.push_back("MUX");
1274 gate_list
.push_back("NAND");
1275 gate_list
.push_back("NOR");
1279 gate_list
.push_back("NAND");
1280 gate_list
.push_back("NOR");
1281 gate_list
.push_back("AOI3");
1282 gate_list
.push_back("OAI3");
1286 gate_list
.push_back("NAND");
1287 gate_list
.push_back("NOR");
1288 gate_list
.push_back("AOI3");
1289 gate_list
.push_back("OAI3");
1290 gate_list
.push_back("AOI4");
1291 gate_list
.push_back("OAI4");
1295 gate_list
.push_back("AND");
1296 gate_list
.push_back("NAND");
1297 gate_list
.push_back("OR");
1298 gate_list
.push_back("NOR");
1299 gate_list
.push_back("XOR");
1300 gate_list
.push_back("XNOR");
1301 gate_list
.push_back("ANDNOT");
1302 gate_list
.push_back("ORNOT");
1306 gate_list
.push_back("AND");
1307 gate_list
.push_back("NAND");
1308 gate_list
.push_back("OR");
1309 gate_list
.push_back("NOR");
1310 gate_list
.push_back("ANDNOT");
1311 gate_list
.push_back("ORNOT");
1314 cmd_error(args
, argidx
, stringf("Unsupported gate type: %s", g
.c_str()));
1316 gate_list
.push_back(g
);
1318 for (auto gate
: gate_list
) {
1320 enabled_gates
.erase(gate
);
1322 enabled_gates
.insert(gate
);
1327 if (arg
== "-fast") {
1331 if (arg
== "-dff") {
1335 if (arg
== "-clk" && argidx
+1 < args
.size()) {
1336 clk_str
= args
[++argidx
];
1340 if (arg
== "-keepff") {
1344 if (arg
== "-nocleanup") {
1348 if (arg
== "-showtmp") {
1349 show_tempdir
= true;
1352 if (arg
== "-markgroups") {
1358 extra_args(args
, argidx
, design
);
1360 if (!lut_costs
.empty() && !liberty_file
.empty())
1361 log_cmd_error("Got -lut and -liberty! This two options are exclusive.\n");
1362 if (!constr_file
.empty() && liberty_file
.empty())
1363 log_cmd_error("Got -constr but no -liberty!\n");
1365 for (auto mod
: design
->selected_modules())
1367 if (mod
->processes
.size() > 0) {
1368 log("Skipping module %s as it contains processes.\n", log_id(mod
));
1372 assign_map
.set(mod
);
1373 signal_init
.clear();
1375 for (Wire
*wire
: mod
->wires())
1376 if (wire
->attributes
.count("\\init")) {
1377 SigSpec initsig
= assign_map(wire
);
1378 Const initval
= wire
->attributes
.at("\\init");
1379 for (int i
= 0; i
< GetSize(initsig
) && i
< GetSize(initval
); i
++)
1380 switch (initval
[i
]) {
1382 signal_init
[initsig
[i
]] = State::S0
;
1385 signal_init
[initsig
[i
]] = State::S0
;
1392 if (!dff_mode
|| !clk_str
.empty()) {
1393 abc9_module(design
, mod
, script_file
, exe_file
, liberty_file
, constr_file
, cleanup
, lut_costs
, dff_mode
, clk_str
, keepff
,
1394 delay_target
, sop_inputs
, sop_products
, lutin_shared
, fast_mode
, mod
->selected_cells(), show_tempdir
, sop_mode
);
1398 CellTypes
ct(design
);
1400 std::vector
<RTLIL::Cell
*> all_cells
= mod
->selected_cells();
1401 std::set
<RTLIL::Cell
*> unassigned_cells(all_cells
.begin(), all_cells
.end());
1403 std::set
<RTLIL::Cell
*> expand_queue
, next_expand_queue
;
1404 std::set
<RTLIL::Cell
*> expand_queue_up
, next_expand_queue_up
;
1405 std::set
<RTLIL::Cell
*> expand_queue_down
, next_expand_queue_down
;
1407 typedef tuple
<bool, RTLIL::SigSpec
, bool, RTLIL::SigSpec
> clkdomain_t
;
1408 std::map
<clkdomain_t
, std::vector
<RTLIL::Cell
*>> assigned_cells
;
1409 std::map
<RTLIL::Cell
*, clkdomain_t
> assigned_cells_reverse
;
1411 std::map
<RTLIL::Cell
*, std::set
<RTLIL::SigBit
>> cell_to_bit
, cell_to_bit_up
, cell_to_bit_down
;
1412 std::map
<RTLIL::SigBit
, std::set
<RTLIL::Cell
*>> bit_to_cell
, bit_to_cell_up
, bit_to_cell_down
;
1414 for (auto cell
: all_cells
)
1418 for (auto &conn
: cell
->connections())
1419 for (auto bit
: conn
.second
) {
1420 bit
= assign_map(bit
);
1421 if (bit
.wire
!= nullptr) {
1422 cell_to_bit
[cell
].insert(bit
);
1423 bit_to_cell
[bit
].insert(cell
);
1424 if (ct
.cell_input(cell
->type
, conn
.first
)) {
1425 cell_to_bit_up
[cell
].insert(bit
);
1426 bit_to_cell_down
[bit
].insert(cell
);
1428 if (ct
.cell_output(cell
->type
, conn
.first
)) {
1429 cell_to_bit_down
[cell
].insert(bit
);
1430 bit_to_cell_up
[bit
].insert(cell
);
1435 if (cell
->type
== "$_DFF_N_" || cell
->type
== "$_DFF_P_")
1437 key
= clkdomain_t(cell
->type
== "$_DFF_P_", assign_map(cell
->getPort("\\C")), true, RTLIL::SigSpec());
1440 if (cell
->type
== "$_DFFE_NN_" || cell
->type
== "$_DFFE_NP_" || cell
->type
== "$_DFFE_PN_" || cell
->type
== "$_DFFE_PP_")
1442 bool this_clk_pol
= cell
->type
== "$_DFFE_PN_" || cell
->type
== "$_DFFE_PP_";
1443 bool this_en_pol
= cell
->type
== "$_DFFE_NP_" || cell
->type
== "$_DFFE_PP_";
1444 key
= clkdomain_t(this_clk_pol
, assign_map(cell
->getPort("\\C")), this_en_pol
, assign_map(cell
->getPort("\\E")));
1449 unassigned_cells
.erase(cell
);
1450 expand_queue
.insert(cell
);
1451 expand_queue_up
.insert(cell
);
1452 expand_queue_down
.insert(cell
);
1454 assigned_cells
[key
].push_back(cell
);
1455 assigned_cells_reverse
[cell
] = key
;
1458 while (!expand_queue_up
.empty() || !expand_queue_down
.empty())
1460 if (!expand_queue_up
.empty())
1462 RTLIL::Cell
*cell
= *expand_queue_up
.begin();
1463 clkdomain_t key
= assigned_cells_reverse
.at(cell
);
1464 expand_queue_up
.erase(cell
);
1466 for (auto bit
: cell_to_bit_up
[cell
])
1467 for (auto c
: bit_to_cell_up
[bit
])
1468 if (unassigned_cells
.count(c
)) {
1469 unassigned_cells
.erase(c
);
1470 next_expand_queue_up
.insert(c
);
1471 assigned_cells
[key
].push_back(c
);
1472 assigned_cells_reverse
[c
] = key
;
1473 expand_queue
.insert(c
);
1477 if (!expand_queue_down
.empty())
1479 RTLIL::Cell
*cell
= *expand_queue_down
.begin();
1480 clkdomain_t key
= assigned_cells_reverse
.at(cell
);
1481 expand_queue_down
.erase(cell
);
1483 for (auto bit
: cell_to_bit_down
[cell
])
1484 for (auto c
: bit_to_cell_down
[bit
])
1485 if (unassigned_cells
.count(c
)) {
1486 unassigned_cells
.erase(c
);
1487 next_expand_queue_up
.insert(c
);
1488 assigned_cells
[key
].push_back(c
);
1489 assigned_cells_reverse
[c
] = key
;
1490 expand_queue
.insert(c
);
1494 if (expand_queue_up
.empty() && expand_queue_down
.empty()) {
1495 expand_queue_up
.swap(next_expand_queue_up
);
1496 expand_queue_down
.swap(next_expand_queue_down
);
1500 while (!expand_queue
.empty())
1502 RTLIL::Cell
*cell
= *expand_queue
.begin();
1503 clkdomain_t key
= assigned_cells_reverse
.at(cell
);
1504 expand_queue
.erase(cell
);
1506 for (auto bit
: cell_to_bit
.at(cell
)) {
1507 for (auto c
: bit_to_cell
[bit
])
1508 if (unassigned_cells
.count(c
)) {
1509 unassigned_cells
.erase(c
);
1510 next_expand_queue
.insert(c
);
1511 assigned_cells
[key
].push_back(c
);
1512 assigned_cells_reverse
[c
] = key
;
1514 bit_to_cell
[bit
].clear();
1517 if (expand_queue
.empty())
1518 expand_queue
.swap(next_expand_queue
);
1521 clkdomain_t
key(true, RTLIL::SigSpec(), true, RTLIL::SigSpec());
1522 for (auto cell
: unassigned_cells
) {
1523 assigned_cells
[key
].push_back(cell
);
1524 assigned_cells_reverse
[cell
] = key
;
1527 log_header(design
, "Summary of detected clock domains:\n");
1528 for (auto &it
: assigned_cells
)
1529 log(" %d cells in clk=%s%s, en=%s%s\n", GetSize(it
.second
),
1530 std::get
<0>(it
.first
) ? "" : "!", log_signal(std::get
<1>(it
.first
)),
1531 std::get
<2>(it
.first
) ? "" : "!", log_signal(std::get
<3>(it
.first
)));
1533 for (auto &it
: assigned_cells
) {
1534 clk_polarity
= std::get
<0>(it
.first
);
1535 clk_sig
= assign_map(std::get
<1>(it
.first
));
1536 en_polarity
= std::get
<2>(it
.first
);
1537 en_sig
= assign_map(std::get
<3>(it
.first
));
1538 abc9_module(design
, mod
, script_file
, exe_file
, liberty_file
, constr_file
, cleanup
, lut_costs
, !clk_sig
.empty(), "$",
1539 keepff
, delay_target
, sop_inputs
, sop_products
, lutin_shared
, fast_mode
, it
.second
, show_tempdir
, sop_mode
);
1540 assign_map
.set(mod
);
1544 Pass::call(design
, "clean");
1548 signal_init
.clear();
1556 PRIVATE_NAMESPACE_END