1 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
3 * cris/semcrisv32f-switch.c: Regenerate.
5 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
7 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
8 just a short CRIS-specific notice. Tweak the wording for a
9 failing architecture test.
11 * cris/traps.c (TARGET_SYS_writev): New macro.
12 (is_mapped_only, cris_dump_map): New functions.
13 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
14 and prot combinations and a non-zero page-offset. If
15 TARGET_MAP_FIXED, unmap pages before mapping them.
16 <case TARGET_SYS_mprotect>: When checking, allow any length
17 argument. Don't actually do anything.
18 <case TARGET_SYS_writev>: New case.
20 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
21 * cris/sim-if.c: Include elf-bfd.h.
22 (struct progbounds): New members end_loadmem, start_nonloadmem.
23 (xprintf, eprintf): New functions, copied from common/sim-load.c.
24 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
25 (get_progbounds_iterator): Renamed from get_progbounds. Make
26 static. Update head comment. Set new struct progbounds members.
27 (exec_load_addr, interp_load_addr, interp_start_addr): New static
29 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
30 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
32 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
33 handling to use auxv_entries. Improve error message and checking
34 for invalid programs. Use new variable abfd for the program
35 instead of for each access reaching into sd to get it.
36 (sim_create_inferior): If non-zero, use interp_start_addr instead
37 of the program start address.
38 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
39 stale comment. Always specify little-endian.
41 2008-07-29 Nick Clifton <nickc@redhat.com>
43 * common/genmloop.sh: Add new parameter: -shell to specify the
44 command interpreter to use to run the input file. This is
45 necessary because otherwise SHELL is taken from the user's
46 environment, and not from the makefile that invoked this script
47 and the user might not be running an sh-like shell.
48 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
49 * fr30/Makefile.in: Likewise.
50 * frv/Makefile.in: Likewise.
51 * i960/Makefile.in: Likewise.
52 * iq2000/Makefile.in: Likewise.
53 * m32r/Makefile.in: Likewise.
55 * frv/mloop.in: Add missing start of line comment marker.
57 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
59 * cris/configure: Regenerate to track ../common/common.m4 changes.
60 * cris/config.in: Ditto.
62 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
63 Daniel Jacobowitz <dan@codesourcery.com>
64 Joseph Myers <joseph@codesourcery.com>
66 * cris/configure: Regenerate.
68 2008-05-09 Olivier Hainque <hainque@adacore.com>
70 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
72 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
74 * MAINTAINERS: Add myself as maintainer of cr16 port.
76 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
78 Add simulator for National cr16 processor.
79 * cr16: New directory.
80 * configure.ac: Add entry for National cr16.
81 * configure: Regenerate.
83 2008-02-05 DJ Delorie <dj@redhat.com>
85 * configure.ac (v850): V850 now has a testsuite.
86 * configure (v850): Likewise.
88 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
90 Updated copyright notices for most files.
92 2007-12-19 DJ Delorie <dj@redhat.com>
94 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
97 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
99 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
100 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
101 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
102 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
103 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
104 cris/semcrisv32f-switch.c: Regenerate.
106 2007-08-24 Joel Brobecker <brobecker@adacore.com>
108 Switch the license of all files explicitly copyright the FSF
111 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
113 * Makefile.in: Add dummy "pdf" target.
115 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
117 * cris/traps.c (dump_statistics): Change format for cycle numbers
118 to %llu and cast parameters to unsigned long long.
120 2007-02-16 Thiemo Seufer <ths@mips.com>
122 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
124 2007-01-28 Manuel Lauss <slauss@resi.at>
126 * configure.ac (sh64-*-*): Change to sh64*-*-*.
127 (sh-*-*): Change to sh*-*-*.
128 * configure: Regenerated.
130 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
132 Updated copyright notices for most files.
134 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
136 * Makefile.in (autoconf-common autoheader-common): Only run
137 autoheader on subdirs with a file config.in.
139 * configure.ac (common): Make the default "yes" for all targets
141 * configure: Regenerate.
143 * Makefile.in (autoconf-common autoheader-common): In documented
144 usage, say SHELL=/bin/sh.
145 (.PHONY): Add autoheader-common.
147 * MAINTAINERS: Add self as authorized committer for *.
149 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
150 Hans-Peter Nilsson <hp@axis.com>
152 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
153 (cris_unknown_syscall_action): Declare.
154 * cris/sim-if.c (cris_unknown_syscall_action): Define.
155 (cris_options): Add cris-unknown-syscall option.
156 (cris_option_handler): Correct comment about and error message for
157 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
158 * cris/traps.c: Include stdarg.h
159 (cris_unknown_syscall): New function.
160 (cris_break_13_handler): Instead of sim_io_eprintf and
161 sim_engine_halt, call cris_unknown_syscall to handle more or less
162 unknown syscalls. Adjust code as necessary to handle return
165 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
167 * MAINTAINERS: Add Dave Brolley for sh64.
169 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
171 * cris/traps.c (TARGET_PIPE_BUF): New macro.
172 (cris_pipe_empty): Correct initialization of "remaining". Only
173 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
176 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
178 * cris/configure.ac: Check for limits.h and sys/param.h.
179 * cris/configure, cris/config.in: Rebuild.
180 * cris/traps.c (SIM_PATHMAX): New macro.
181 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
183 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
185 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
186 * Makefile.in (FLAGS_TO_PASS): Include libdir.
187 * configure: Regenerated.
189 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
191 * cris/configure: Regenerated.
193 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
195 * cris/configure: Regenerated.
197 2006-05-05 Andreas Schwab <schwab@suse.de>
199 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
200 * configure: Regenerate.
202 * Makefile.in (CFLAGS_FOR_BUILD): Define.
203 (CC_FOR_BUILD): Don't override.
204 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
206 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
208 * MAINTAINERS: Add an "Authorized committers" section, and list
211 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
213 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
215 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
217 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
218 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
219 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
220 (all): Depend on rvdummy$(EXEEXT).
221 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
222 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
224 * cris/configure: Regenerate.
225 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
226 (enum cris_interrupt_type, crisv10deliver_interrupt)
227 (crisv32deliver_interrupt: New declarations.
228 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
229 sim_events_tickn and set state-events member work_pending when it's
230 time for the next event.
231 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
232 interrupt-delivery function.
233 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
234 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
235 * cris/devices.c: Include hw-device.h.
236 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
237 (device_io_write_buffer): Only perform 0x900000xx-functions if
238 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
239 call hw_io_write_buffer. Add return 0 last in function.
240 * cris/sim-if.c (cris_have_900000xxif): Now global.
241 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
242 Force "-model" option, effectively.
243 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
244 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
246 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
248 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
249 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
250 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
252 2006-03-13 DJ Delorie <dj@redhat.com>
254 * MAINTAINERS: Add self as m32c sim maintainer.
256 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
258 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
260 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
262 2006-01-23 Jim Blandy <jimb@redhat.com>
264 Add simulator for Renesas M32C and M16C.
266 * m32c: New directory.
267 * configure.ac: Add entry for Renesas M32C.
268 * configure: Regenerate.
270 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
272 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
273 cycle count for the current insn.
275 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
277 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
278 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
279 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
280 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
282 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
284 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
285 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
286 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
287 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
288 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
289 cris/semcrisv32f-switch.c: Regenerate.
291 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
293 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
294 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
296 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
297 F_GETFL on fd 0, 1 and 2.
299 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
301 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
302 last_open_fd, last_open_flags.
303 * cris/traps.c: Don't include targ-vals.h.
304 (TARGET_O_ACCMODE): Define.
305 (cris_break_13_handler): Set new _sim_cpu members.
306 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
307 Rearrange code as switch. Emit "unimplemented" abort for
308 unimplemented fcntl calls.
310 * cris/traps.c (TARGET_SYS_stat): Define.
311 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
312 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
314 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
316 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
317 low 32 bits are used after an unsigned long cast.
319 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
321 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
323 2005-05-26 Chris Demetriou <cgd@netbsd.org>
325 * MAINTAINERS: Update my mail address, move myself to the
326 "Past maintainers" section.
328 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
330 * configure.ac: Add igen to v850 build.
331 * configure: Regenerate.
333 2005-04-29 Paul Brook <paul@codesourcery.com>
335 * common/callback.c (PIPE_BUF): Provide default definition.
336 (os_lstat): Use stat if lstat is not available on the host.
337 (os_ftruncate): Return EINVAL if not available on the host.
338 (os_truncate): Ditto.
339 * common/configure.ac: Check for lstat, truncate and ftruncate.
340 * common/configure: Regenerate.
341 * common/config.in: Regenerate.
343 2005-04-27 Paul Brook <paul@codesourcery.com>
345 * common/Make-common.in: Add $(EXEEXT) to "run".
347 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
349 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
350 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
351 implemented. In call to create_map, pad length argument to 8k.
353 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
355 * configure.ac: Add explicit sh64 case.
356 * configure: Regenerate.
358 2005-03-30 Paul Brook <paul@codesourcery.com>
360 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
362 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
364 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
365 include cgen-ops.h in decodev10.c and decodev32.c.
366 * cris/sim-main.h: Don't include cgen-ops.h here.
367 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
368 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
369 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
370 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
371 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
372 cris/semcrisv32f-switch.c: Regenerate.
374 * cris/traps.c (cris_break_13_handler) <case
375 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
376 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
378 2005-03-23 Mark Kettenis <kettenis@gnu.org>
380 * cris/configure: Regenerate.
382 2005-02-28 Jim Blandy <jimb@redhat.com>
384 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
385 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
386 Regenerated, after change to common/aclocal.m4.
388 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
390 * iq2000: New target subdirectory.
391 * configure.ac: Add iq2000 target.
392 * configure: Regenerate.
394 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
396 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
397 (realclean, install): Fail if subdir make failed.
399 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
401 * cris: New directory, simulator for Axis Communications CRIS
402 including CRIS v32, CGEN-based.
403 * configure.ac: Add corresponding configury.
404 * configure: Regenerate.
406 2005-01-17 Andrew Cagney <cagney@gnu.org>
408 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
409 common directory. Remove sparc*-*-* from list.
411 2005-01-11 Andrew Cagney <cagney@gnu.org>
413 * Makefile.in (autoconf-common autoheader-common): Add --force to
414 autoconf and autoheader.
415 (autoconf-common autoheader-common)
416 (autoconf-install autoheader-install): Check for configure.ac, not
418 * configure.ac: Delete AC_CONFIG_AUX_DIR.
419 * configure: Re-generate.
421 2005-01-07 Andrew Cagney <cagney@gnu.org>
423 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
424 correctly calls AC_CONFIG_SUBDIRS.
425 * configure: Re-generate.
427 2004-12-01 Andrew Cagney <cagney@gnu.org>
429 * i960, h8500: Delete directory.
431 2004-11-12 Andrew Cagney <cagney@gnu.org>
433 * d30v, fr30, mn10200, z8k: Delete directory.
435 2004-03-10 Ben Elliston <bje@gnu.org>
437 * MAINTAINERS: Update my mail address.
439 2004-01-26 Chris Demetriou <cgd@broadcom.com>
441 * configure.in (mips*-*-*): Configure in testsuite.
442 * configure: Regenerate.
444 2003-10-08 Dave Brolley <brolley@redhat.com>
446 * configure.in: Move frv handling to alphabetically correct placement.
448 2003-09-03 Andreas Schwab <schwab@suse.de>
450 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
452 2003-08-29 Dave Brolley <brolley@redhat.com>
454 * MAINTAINERS: Add myself as maintainer of the FRV port.
456 2003-08-20 Michael Snyder <msnyder@redhat.com>
457 Dave Brolley <brolley@redhat.com>
459 * frv/: New directory, simulator for the Fujitsu FRV.
460 * configure.in: Add frv configury.
461 * configure: Regenerate.
463 2003-08-10 Ben Elliston <bje@wasabisystems.com>
465 * MAINTAINERS: Update my mail address.
467 2003-08-09 Andrew Cagney <cagney@redhat.com>
469 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
470 maintenance. List igen and sh maintainers. Mention that target
471 and global maintainers pick up the slack.
473 2003-07-09 Michael Snyder <msnyder@redhat.com>
475 * configure.in: Add testsuite to extra_subdirs for sh.
476 * configure: Regenerate.
478 2003-01-23 Nick Clifton <nickc@redhat.com>
482 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
484 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
486 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
488 * MAINTAINERS: Update my email address.
490 2002-07-17 Andrew Cagney <ac131313@redhat.com>
492 * w65/: Delete directory.
494 2002-07-16 Andrew Cagney <ac131313@redhat.com>
496 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
497 * configure: Re-generate.
499 2002-07-13 Andrew Cagney <ac131313@redhat.com>
501 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
502 * configure: Re-generate.
504 2002-06-16 Andrew Cagney <ac131313@redhat.com>
506 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
507 id, date and host to be overriden by NAME, ID, DATE and HOST
508 respectfully. Use ISO dates.
510 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
512 * Makefile.in (ChangeLog): New makefile variable.
513 * README-HACKING: Mention the ChangeLog makefile variable.
515 2002-06-01 Andrew Cagney <ac131313@redhat.com>
517 * tic80/: Delete directory.
519 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
521 * MAINTAINERS: Update my email address.
523 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
525 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
527 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
529 * MAINTAINERS: Record self as a co-maintainer of just common/.
531 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
533 * MAINTAINERS: Point to GDB files describing overall maintaince
534 and check-in procedures.
536 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
538 * MAINTAINERS: Add myself for ARM portions.
540 2001-10-19 Andrew Cagney <ac131313@redhat.com>
542 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
543 * configure: Re-generate.
545 2001-02-16 Ben Elliston <bje@redhat.com>
547 * MAINTAINERS: Add myself for common portions.
549 2001-01-15 Chris Demetriou <cgd@broadcom.com>
551 * MAINTAINERS: Added self and Andrew for the mips sim.
553 2000-10-25 Geoff Keating <geoffk@cygnus.com>
555 * MAINTAINERS: Added self and Andrew for the ppc sim.
557 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
559 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
560 * m68hc11: New directory.
562 * configure: Regenerate.
564 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
566 * tic80: New directory.
567 * configure.in: Add configury.
568 * configure: Regenerate.
570 2000-04-20 Nick Clifton <nickc@cygnus.com>
572 * configure.in (extra_subdirs): Add testsuite to strongarm
574 * configure: Regenerate.
576 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
578 * MAINTAINERS: New file. Blank.
580 1999-11-18 Ben Elliston <bje@cygnus.com>
582 * configure.in: Require autoconf 2.13 and remove obsolete
583 invocation of AC_C_CROSS.
584 * configure: Regenerate.
586 1999-09-29 Doug Evans <devans@casey.cygnus.com>
588 * configure.in: Configure the testsuite directory for thumb.
589 * configure: Regenerate.
591 1999-07-16 Ben Elliston <bje@cygnus.com>
593 * configure.in: Configure the testsuite directory for arm.
594 * configure: Regenerate.
596 1999-04-08 Nick Clifton <nickc@cygnus.com>
598 * configure.in: Add support for MCore target.
599 * configure: Regenerate.
601 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
603 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
604 RUNTEST instead of commenting out, fixes portability problem.
606 1999-02-08 Nick Clifton <nickc@cygnus.com>
608 * configure.in: Add support for StrongARM target.
609 * configure: Regenerate.
611 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
613 * configure.in: Require autoconf 2.12.1 or higher.
615 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
617 * configure.in (i960-*-*): Add.
618 * configure: Rebuild.
620 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
622 * configure.in: Added case for fr30-*-*.
623 * configure: Regenerated.
625 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
627 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
628 to allow successful operation on Windows.
630 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
632 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
633 check can be invoked recursively.
635 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
637 * configure.in: Build simulator on sparclite and sparc86x targets.
638 * configure: Regenerate.
640 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
642 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
643 to autoconf and autoheader.
645 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
647 * Makefile.in (autoconf-common autoheader-common): Pass `-l
648 ../common' to autoconf and autoheader. Unconditionally run
649 autoconf in every subdir.
650 (autoconf-changelog autoheader-changelog): Unconditionally run
651 commands in every subdir.
652 (autoconf-install autoheader-install): Likewise.
654 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
656 * Makefile.in: Get SHELL from configure.
657 * (FLAGS_TO_PASS): Pass down SHELL.
658 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
661 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
663 * configure.in (extra_subdirs): Enable igen for mn10300.
664 * configure: Re-generate.
666 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
668 * configure.in (extra_subdirs): Add support for thumb target.
670 * configure (extra_subdirs): Add support for thumb target.
672 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
674 * configure.in (extra_subdirs): Add IGEN directory when MIPS
676 * configure: Regenerate.
678 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
680 * configure.in (extra_subdirs): v850ea needs igen.
681 * configure: Re-generate.
683 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
685 * configure.in (testdir): When a testsuite directory, add that to
686 the list of confdirs.
688 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
690 * configure.in (extra_subdirs): Enable igen ready for V850.
692 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
694 * configure.in (w65-*-*, only_if_enabled): Set.
695 * configure: Re-generate.
697 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
699 * configure.in (sparc*-*-*, only_if_enabled): Set
700 only_if_enabled=yes. Check only_if_enabled before enabling a
702 * configure: Regenerate.
704 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
706 * configure.in (extra_subdirs): Add v850e target.
708 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
710 * configure.in (extra_subdirs): Add v850ea target.
712 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
714 * configure.in (sparc*-*-*): Don't build erc32.
715 * configure: Regenerate.
717 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
719 * configure.in (m32r-*-*): New target.
720 * configure: Regenerate.
722 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
724 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
726 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
727 thought that .NOEXPORT was the default target.
729 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
731 * Makefile.in (clean mostlyclean): Restore targets accidentally
732 deleted in earlier change.
734 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
736 * Makefile.in (autoheader-common, autoheader-changelog,
737 autoheader-install): Perform autoheader in addition to autoconf.
739 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
741 * Makefile.in (autoconf-install): New target.
742 (autoconf-changelog): Try different way to obtain user name.
744 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
746 * Makefile.in (autoconf-changelog): New target, update
747 ChangeLog for all subdirectories - normally used after
748 autoconf-common target.
750 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
752 * configure.in (extra_subdirs): Include testsuite for d30v.
753 * configure: Regenerate.
755 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
757 (check): New rules - drive the testsuite.
759 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
761 * configure.in: Add mn10200 configure lines accidentally
763 * configure: Regenerated.
765 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
767 * configure.in (extra_subdirs): Generalize common sub directory
769 (extra_subdirs): For d30v add igen to the list to be built.
771 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
773 * configure.in (d30v): New target.
774 * configure: Regenerated.
776 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
778 * configure.in: Don't require GCC to build the mn10200
780 * configure: Rebuilt.
782 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
784 * configure.in: Don't configure any subdirs if no simulator
785 is being built. Don't use erc32 for sparc64.
786 * configure: Regenerated.
788 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
790 * Makefile.in (autoconf-common): New target.
791 * configure.in: Do configure common.
792 * configure: Regenerated.
794 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
796 * configure configure.in: Don't configure common anymore. Files
797 from common are now built in the individual simualtor directories.
798 This fixes problems with the WinGDB build procedure.
800 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
802 * configure: Enable the mn10200 simulator.
804 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
806 * configure.in (configdirs): Add common.
807 * configure: Regenerated.
809 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
811 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
812 system V based targets.
813 * configure: Regenerate.
815 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
817 * configure.in (--enable-sim-powerpc): Delete.
819 * configure: Regenerated.
821 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
823 * configure.in: Only build the V850 simulator if
825 * configure: Rebuild.
827 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
829 * configure.in: Do build erc32 for DOS and Windows hosts.
830 * configure: Rebuild.
832 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
834 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
835 be inherited from the parent. Remove INSTALL_XFORM and
836 INSTALL_XFORM1. Make INSTALL be set from configure.
838 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
840 * configure.in: Only build the MIPS simulator if we are using
842 * configure: Rebuild.
844 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
846 * configure.in (v850-*-*): Added V850 simulator.
848 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
850 * configure.in (d10v-*-*): Added D10V simulator.
852 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
854 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
855 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
857 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
858 (AC_PROG_INSTALL): Added.
859 * configure: Rebuilt.
861 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
863 * configure.in: Only configure erc32 if using gcc.
864 * configure: Rebuild.
866 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
868 * configure.in (sim_target): Build PowerPC simulator for powerpc
869 System V.4, Solaris, and Elf targets.
870 * configure: Regenerate with autoconf 2.10.
872 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
874 * configure.in: Only built erc32 simulator on Unix hosts as it
876 * configure: Regenerated with autoconf 2.8.
878 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
880 * erc32: Sparc simulator from the ESA.
882 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
884 From: Miles Bader <miles@gnu.ai.mit.edu>
885 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
886 * configure: Regenerate using autoconf.
888 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
890 * Makefile.in (install): Fix typo.
892 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
894 * configure: Regenerate with autoconf 2.7.
896 * Makefile.in (all): Simplify.
897 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
898 as in the all target.
899 (distclean, maintainer-clean, realclean): Likewise.
902 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
904 * Makefile.in (all): Remove extra '\' char from shell script.
906 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
908 * Makefile.in (all): Avoid a for loop with zero elements, even if
909 the loop will not be executed because of an if statement.
911 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
913 * Makefile.in (install): Add missing semicolon in "fi \".
915 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
917 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
918 defaults from configure.
920 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
922 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
923 if either --enable-sim-powerpc is used, or the host compiler is
926 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
928 * configure.in (mips*-*-*): Added "mips" simulator target.
929 * configure: Re-generated.
931 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
933 * Makefile.in (BISON): Remove macro.
934 (FLAGS_TO_PASS): Remove BISON.
936 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
938 * configure.in: Explicitly `exit 0' for broken shells.
939 * configure: Rebuilt.
941 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
943 * common/run.c (main): Initialize the callbacks.
945 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
947 * Makefile.in (maintainer-clean): New synonym for realclean.
949 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
951 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
952 the target is powerpc*-*-eabisim*, since it requires GCC to build.
954 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
956 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
957 <cagney@highland.com.au>.
958 * configure: Regnerate from configure.in.
960 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
962 * Update all FSF addresses except those in COPYING* files.
964 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
966 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
967 submakes either default or passed in value.
969 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
971 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
972 install): Changed targets so that they descend all
973 subdirectories in $(SUBDIRS).
974 (*-all, *-clean, *-install): Removed targets.
976 * configure.in: Don't bother with target makefile fragments, they
977 are no longer needed.
978 * configure: regenerated.
980 * Makefile.in, configure.in: converted to autoconf.
981 * configure: New file, generated with autconf 2.4.
983 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
985 * Makefile.in: Support ARM.
986 * configure.in: Ditto.
988 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
990 * Makefile.in: Support W65.
991 * configure.in: Ditto.
993 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
995 * Makefile.in: Add TAGS target.
997 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
999 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1000 install-h8300, clean-h8300, all-h8500, install-h8500,
1001 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1004 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1006 * Makefile.in: remove endian.h trace from h8500
1008 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1010 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1012 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1014 * Makefile.in: make all of the all-* target (except all-nothing)
1015 depend on endian.h, so that if we're not building a simulator, we
1018 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1020 * Makefile.in (check, installcheck): Added dummy targets.
1022 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1024 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1025 explicitly make it, since some makes apparently don't work with
1026 VPATH and .c to executable rules (SunOS make for example).
1028 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1030 * Makefile.in (endian): Add explicit rule for broken makes.
1032 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1034 * Makefile.in (info, install-info): New targets.
1035 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1038 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1040 * Makefile.in (endian.h): build endian.h via a temporary file so
1041 that we don't leave an incomplete file lying around on
1043 (clean): remove endian, e.h, and endian.h.
1045 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1047 * Makefile.in, configure.in: if target isn't supported, build a