sim/ChangeLog

   1 2013-04-19  Nathan Froyd  <froydnj@codesourcery.com>
   2
   3         * ppc-instructions (isel): New instruction.
   4
   5 2013-03-15  Steve Ellcey  <sellcey@mips.com>
   6
   7         * arm/wrapper.c (sim_complete_command): Make char arguments const.
   8         * avr/interp.c (sim_complete_command): Ditto.
   9         * common/sim-options.c (sim_complete_command): Ditto.
  10         * cr16/interp.c (sim_complete_command): Ditto.
  11         * erc32/interf.c (sim_complete_command): Ditto.
  12         * m32c/gdb-if.c (sim_complete_command): Ditto.
  13         * microblaze/interp.c (sim_complete_command): Ditto.
  14         * ppc/sim_calls.c (sim_complete_command): Ditto.
  15         * rl78/gdb-if.c (sim_complete_command): Ditto.
  16         * rx/gdb-if.c (sim_complete_command): Ditto.
  17         * sh/interp.c (sim_complete_command): Ditto.
  18
  19 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
  20
  21         Update year range in copyright notice of all files.
  22
  23 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  24
  25         Update old contact info in GPL license notices.
  26
  27 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  28
  29         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  30
  31 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  32
  33         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  34         condition.
  35         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  36         * arm/configure: Regenerate.
  37         * avr/configure: Regenerate.
  38         * bfin/configure: Regenerate.
  39         * common/configure: Regenerate.
  40         * cr16/configure: Regenerate.
  41         * cris/configure: Regenerate.
  42         * d10v/configure: Regenerate.
  43         * erc32/configure: Regenerate.
  44         * frv/configure: Regenerate.
  45         * h8300/configure: Regenerate.
  46         * igen/configure: Regenerate.
  47         * iq2000/configure: Regenerate.
  48         * lm32/configure: Regenerate.
  49         * m32c/configure: Regenerate.
  50         * m32r/configure: Regenerate.
  51         * m68hc11/configure: Regenerate.
  52         * mcore/configure: Regenerate.
  53         * microblaze/configure: Regenerate.
  54         * mips/configure: Regenerate.
  55         * mn10300/configure: Regenerate.
  56         * moxie/configure: Regenerate.
  57         * ppc/configure: Regenerate.
  58         * rl78/configure: Regenerate.
  59         * rx/configure: Regenerate.
  60         * sh/configure: Regenerate.
  61         * sh64/configure: Regenerate.
  62         * testsuite/configure: Regenerate.
  63         * v850/configure: Regenerate.
  64
  65 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  66
  67         * MAINTAINERS: Update my email address.
  68
  69 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  70
  71         * mips/basic.exp: Add mips*-mti-elf* target.
  72         * configure.ac: Add mips*-mti-elf* target.
  73         * configure: Regenerate.
  74
  75 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  76
  77         * configure: Regenerate.
  78
  79 2012-06-06  Michael Eager  <eager@eagercon.com>
  80
  81         * microblaze/interp.c (config.h): Add #include.
  82
  83 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  84
  85         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  86         Frysinger.
  87
  88 2011-11-28  DJ Delorie  <dj@redhat.com>
  89
  90         * configure.tgt: Add rl78 support.
  91         * configure: Regenerate.
  92         * rl78: New directory.
  93         * MAINTAINERS: Add myself as RL78 maintainer.
  94
  95 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
  96
  97         * MAINTAINERS: Remove Thiemo Seufer.
  98
  99 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 100
 101         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 102         * configure: Regenerate.
 103
 104 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 105
 106         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 107         handle targets.
 108         * configure: Regenerate.
 109
 110 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * MAINTAINERS: Add bfin entry.
 113         * configure.tgt (bfin-*-*): Handle bfin targets.
 114         * configure: Regenerate.
 115
 116 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 117
 118         * .gitignore: Add /*/hw-config.h.
 119
 120 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 121
 122         * .gitignore: New file.
 123
 124 2010-07-28  DJ Delorie  <dj@redhat.com>
 125
 126         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 127
 128 2010-06-08  Nick Clifton  <nickc@redhat.com>
 129
 130         * reg.c (set_oszc): Use unsigned int for the mask.
 131         (set_szc, set_osz, set_sz): Likewise.
 132
 133 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 134
 135         * configure.ac: Target logic moved out to and included from ...
 136         * configure.tgt: ... this new file.
 137         * configure: Regenerated.
 138
 139 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 140
 141         * README-HACKING: Add more sections.
 142
 143 2010-02-11  Doug Evans  <dje@sebabeach.org>
 144
 145         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 146         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 147         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 148         * cris/semcrisv32f-switch.c: Regenerate.
 149
 150 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 151
 152         * avr/configure: Regenerate.
 153         * cris/configure: Regenerate.
 154         * microblaze/configure: Regenerate.
 155
 156 2010-01-02  Doug Evans  <dje@sebabeach.org>
 157
 158         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 159         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 160         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 161         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 162         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 163         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 164
 165 2010-01-01  Doug Evans  <dje@sebabeach.org>
 166
 167         * cris/mloop.in: Fix copyright year update snafu.
 168
 169 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 170
 171         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 172         * common/common.m4: Use AM_ZLIB to check for zlib support.
 173         * ppc/configure.ac: Likewise.
 174         * arm/configure, avr/configure, common/configure, cr16/configure,
 175         cris/configure, d10v/configure, erc32/configure, frv/configure,
 176         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 177         m32r/configure, m68hc11/configure, mcore/configure,
 178         microblaze/configure, mips/configure, mn10300/configure,
 179         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 180         v850/configure: Regenerate.
 181
 182 2009-11-24  DJ Delorie  <dj@redhat.com>
 183
 184         * rx: New directory.
 185         * configure.ac: Add entry for Renesas RX.
 186         * configure: Regenerate.
 187
 188 2009-11-22  Doug Evans  <dje@sebabeach.org>
 189
 190         * cris/cpuall.h: Regenerate.
 191         * cris/cpuv10.h: Regenerate.
 192         * cris/cpuv32.h: Regenerate.
 193         * cris/decodev10.c: Regenerate.
 194         * cris/decodev10.h: Regenerate.
 195         * cris/decodev32.c: Regenerate.
 196         * cris/decodev32.h: Regenerate.
 197
 198 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 199
 200         * avr/interp.c (sim_write): Allow byte access.
 201         (sim_read): Ditto.
 202
 203 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 204
 205         * avr/interp.c (sim_load): Clear memory before loading.
 206
 207 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 208
 209         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 210
 211 2009-10-23  Doug Evans  <dje@sebabeach.org>
 212
 213         * cris/arch.c: Regenerate.
 214         * cris/arch.h: Regenerate.
 215         * cris/cpuall.h: Regenerate.
 216         * cris/cpuv10.c: Regenerate.
 217         * cris/cpuv10.h: Regenerate.
 218         * cris/cpuv32.c: Regenerate.
 219         * cris/cpuv32.h: Regenerate.
 220         * cris/cris-desc.c: Regenerate.
 221         * cris/cris-desc.h: Regenerate.
 222         * cris/cris-opc.h: Regenerate.
 223         * cris/decodev10.c: Regenerate.
 224         * cris/decodev10.h: Regenerate.
 225         * cris/decodev32.c: Regenerate.
 226         * cris/decodev32.h: Regenerate.
 227         * cris/modelv10.c: Regenerate.
 228         * cris/modelv32.c: Regenerate.
 229         * cris/semcrisv10f-switch.c: Regenerate.
 230         * cris/semcrisv32f-switch.c: Regenerate.
 231
 232 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 233
 234         * avr/interp.c (sim_stop): Return 1.
 235
 236 2009-10-16  Doug Evans  <dje@sebabeach.org>
 237
 238         * MAINTAINERS: Add myself as m32r maintainer.
 239
 240 2009-10-15  Michael Egaer  <eager@eagercon.com>
 241
 242         * MAINTAINERS: Add self as MicroBlaze maintainer.
 243
 244 2009-10-14  Ben Elliston  <bje@gnu.org>
 245
 246         * MAINTAINERS (common): Move myself to "past maintainers" section.
 247
 248 2009-10-06  Michael Eager  <eager@eagercon.com>
 249
 250         * microblaze/interp.c: Add include microblaze-dis.h.
 251
 252 2009-09-23  Michael Eager  <eager@eagercon.com>
 253
 254         * configure: Add microblaze-*.* (not regenerated).
 255         * configure.ac: Likewise.
 256         * microblaze/config.in: New.
 257         * microblaze/configure: Generate.
 258         * microblaze/configure.ac: New.
 259         * microblaze/interp.c: New.
 260         * microblaze/Makefile.in: New.
 261         * microblaze/microblaze.h: New.
 262         * microblaze/microblaze.isa: New.
 263         * microblaze/sim-main.h: New.
 264         * microblaze/sysdep.h: New.
 265
 266 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 267
 268         * avr/config.in: Regenerate.
 269         * avr/configure: Likewise.
 270         * configure: Likewise.
 271         * cris/config.in: Likewise.
 272         * cris/configure: Likewise.
 273
 274         * configure.ac: m4_include toplevel config/override.m4.
 275         * configure: Regenerate.
 276         * avr/configure: Regenerate.
 277         * cris/configure: Regenerate.
 278
 279 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 280
 281         * Makefile.in (datarootdir): New variable.
 282
 283 2009-05-18  Jon Beniston <jon@beniston.com>
 284
 285         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 286         * configure.ac: Add lm32 target.
 287         * lm32: New directory.
 288
 289 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 290
 291         * MAINTAINERS: Orphan ppc.
 292
 293 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 294
 295         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 296         m32c_signal_to_target.  Change signal return values from SIGILL,
 297         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 298         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 299
 300 2009-04-30  Anthony Green  <green@moxielogic.com>
 301
 302         * MAINTAINERS: Add myself for the moxie port.
 303         * moxie: New directory.
 304         * configure.ac: Add entry for moxie.
 305         * configure: Regenerate.
 306
 307 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 308
 309         * avr: New directory.
 310         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 311         * avr/config.in: New file, generated by autoheader.
 312         * avr/configure: New file generated by autoconf.
 313         * configure.ac: Add avr.
 314         * configure: Regenerated.
 315
 316 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 317
 318         * Makefile.in: Add dummy install-pdf, html, and
 319         install-html targets.
 320
 321 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 322
 323         * cris/sim-if.c: Include errno.h.
 324         (cris_start_address, cris_program_offset): New variables.
 325         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 326         enums.
 327         (cris_options): New options --cris-program-offset and
 328         --cris-start-address.
 329         (cris_option_handler): Handle new options.
 330         (cris_program_offset_write, cris_set_section_offset_iterator)
 331         (cris_offset_sections, cris_offset_sections): New functions.
 332         (sim_load): Use cris_program_offset_write as function argument to
 333         cris_load_elf_file, not sim_write.
 334         (struct offsetinfo): New struct.
 335         (cris_handle_interpreter): Fix typo in comment.
 336         (sim_open): Call cris_offset_sections as soon as the bfd of the
 337         infile is available.  Gate bfd validity checks on abfd non-NULL.
 338         (sim_create_inferior): Let cris_start_address when != -1 override
 339         other start-address choices.
 340
 341 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 342
 343         * cris/traps.c (abort): Define to call sim_io_error.
 344         (create_map): Make -1 imply a non-fixed address, not 0.  All
 345         callers changed.  Only prefer the next higher unmapped address if
 346         the last mapped address is no less than 0x40000000.  Check that
 347         the address to be mapped is not already mapped.  Update head
 348         comment.
 349         (unmap_pages): Don't call abort when recursive call fails, just
 350         note and return an error if a page in the range couldn't be unmapped.
 351         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 352         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 353         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 354         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 355         don't abort on page not being mapped.  Handle non-anon filemap
 356         with length padded to pagesize.
 357
 358 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 359
 360         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 361         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 362         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 363         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 364         (TARGET_AT_CLKTCK): Remove redundant macros.
 365         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 366         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 367         callers.
 368         (sim_open): Also pass AT_SECURE.
 369
 370         * cris/sim-main.h (struct _sim_cpu): New member
 371         set_target_thread_data.
 372         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 373         * cris/crisv10f.c: Ditto.
 374         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 375         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 376         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 377         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 378         case.
 379
 380         * cris/traps.c (TARGET_SYS_exit_group): Define.
 381         (cris_break_13_handler): Handle it like the exit for the last
 382         thread.
 383
 384         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 385         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 386         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 387         2.6.27.  Set machine field to the BFD printable name of the
 388         machine.
 389
 390         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 391         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 392         TARGET_MAP_DENYWRITE.
 393
 394         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 395         (TARGET_X_OK, TARGET_F_OK): Define.
 396         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 397
 398         * cris/semcrisv32f-switch.c: Regenerate.
 399
 400 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 401
 402         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 403         just a short CRIS-specific notice.  Tweak the wording for a
 404         failing architecture test.
 405
 406         * cris/traps.c (TARGET_SYS_writev): New macro.
 407         (is_mapped_only, cris_dump_map): New functions.
 408         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 409         and prot combinations and a non-zero page-offset.  If
 410         TARGET_MAP_FIXED, unmap pages before mapping them.
 411         <case TARGET_SYS_mprotect>: When checking, allow any length
 412         argument.  Don't actually do anything.
 413         <case TARGET_SYS_writev>: New case.
 414
 415         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 416         * cris/sim-if.c: Include elf-bfd.h.
 417         (struct progbounds): New members end_loadmem, start_nonloadmem.
 418         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 419         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 420         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 421         static.  Update head comment.  Set new struct progbounds members.
 422         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 423         variables.
 424         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 425         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 426         functions.
 427         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 428         handling to use auxv_entries.  Improve error message and checking
 429         for invalid programs.  Use new variable abfd for the program
 430         instead of for each access reaching into sd to get it.
 431         (sim_create_inferior): If non-zero, use interp_start_addr instead
 432         of the program start address.
 433         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 434         stale comment.  Always specify little-endian.
 435
 436 2008-07-29  Nick Clifton  <nickc@redhat.com>
 437
 438         * common/genmloop.sh: Add new parameter: -shell to specify the
 439         command interpreter to use to run the input file.  This is
 440         necessary because otherwise SHELL is taken from the user's
 441         environment, and not from the makefile that invoked this script
 442         and the user might not be running an sh-like shell.
 443         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 444         * fr30/Makefile.in: Likewise.
 445         * frv/Makefile.in: Likewise.
 446         * i960/Makefile.in: Likewise.
 447         * iq2000/Makefile.in: Likewise.
 448         * m32r/Makefile.in: Likewise.
 449
 450         * frv/mloop.in: Add missing start of line comment marker.
 451
 452 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 453
 454         * cris/configure: Regenerate to track ../common/common.m4 changes.
 455         * cris/config.in: Ditto.
 456
 457 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 458             Daniel Jacobowitz  <dan@codesourcery.com>
 459             Joseph Myers  <joseph@codesourcery.com>
 460
 461         * cris/configure: Regenerate.
 462
 463 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 464
 465         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 466
 467 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 468
 469         * MAINTAINERS: Add myself as maintainer of cr16 port.
 470
 471 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 472
 473         Add simulator for National cr16 processor.
 474         * cr16: New directory.
 475         * configure.ac: Add entry for National cr16.
 476         * configure: Regenerate.
 477
 478 2008-02-05  DJ Delorie  <dj@redhat.com>
 479
 480         * configure.ac (v850): V850 now has a testsuite.
 481         * configure (v850): Likewise.
 482
 483 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 484
 485         Updated copyright notices for most files.
 486
 487 2007-12-19  DJ Delorie  <dj@redhat.com>
 488
 489         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 490         cut_point.
 491
 492 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 493
 494         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 495         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 496         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 497         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 498         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 499         cris/semcrisv32f-switch.c: Regenerate.
 500
 501 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 502
 503         Switch the license of all files explicitly copyright the FSF
 504         to GPLv3.
 505
 506 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 507
 508         * Makefile.in: Add dummy "pdf" target.
 509
 510 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 511
 512         * cris/traps.c (dump_statistics): Change format for cycle numbers
 513         to %llu and cast parameters to unsigned long long.
 514
 515 2007-02-16  Thiemo Seufer  <ths@mips.com>
 516
 517         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 518
 519 2007-01-28  Manuel Lauss  <slauss@resi.at>
 520
 521         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 522         (sh-*-*): Change to sh*-*-*.
 523         * configure: Regenerated.
 524
 525 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 526
 527         Updated copyright notices for most files.
 528
 529 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 530
 531         * Makefile.in (autoconf-common autoheader-common): Only run
 532         autoheader on subdirs with a file config.in.
 533
 534         * configure.ac (common): Make the default "yes" for all targets
 535         with sim subdirs.
 536         * configure: Regenerate.
 537
 538         * Makefile.in (autoconf-common autoheader-common): In documented
 539         usage, say SHELL=/bin/sh.
 540         (.PHONY): Add autoheader-common.
 541
 542         * MAINTAINERS: Add self as authorized committer for *.
 543
 544 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 545             Hans-Peter Nilsson  <hp@axis.com>
 546
 547         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 548         (cris_unknown_syscall_action): Declare.
 549         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 550         (cris_options): Add cris-unknown-syscall option.
 551         (cris_option_handler): Correct comment about and error message for
 552         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 553         * cris/traps.c: Include stdarg.h
 554         (cris_unknown_syscall): New function.
 555         (cris_break_13_handler): Instead of sim_io_eprintf and
 556         sim_engine_halt, call cris_unknown_syscall to handle more or less
 557         unknown syscalls.  Adjust code as necessary to handle return
 558         value.
 559
 560 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 561
 562         * MAINTAINERS: Add Dave Brolley for sh64.
 563
 564 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 565
 566         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 567         (cris_pipe_empty): Correct initialization of "remaining".  Only
 568         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 569         are written.
 570
 571 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 572
 573         * cris/configure.ac: Check for limits.h and sys/param.h.
 574         * cris/configure, cris/config.in: Rebuild.
 575         * cris/traps.c (SIM_PATHMAX): New macro.
 576         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 577
 578 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 579
 580         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 581         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 582         * configure: Regenerated.
 583
 584 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 585
 586         * cris/configure: Regenerated.
 587
 588 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 589
 590         * cris/configure: Regenerated.
 591
 592 2006-05-05  Andreas Schwab  <schwab@suse.de>
 593
 594         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 595         * configure: Regenerate.
 596
 597         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 598         (CC_FOR_BUILD): Don't override.
 599         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 600
 601 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 602
 603         * MAINTAINERS: Add an "Authorized committers" section, and list
 604         DJ Delorie for v850.
 605
 606 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 607
 608         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 609
 610 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 611
 612         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 613         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 614         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 615         (all): Depend on rvdummy$(EXEEXT).
 616         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 617         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 618         default off.
 619         * cris/configure: Regenerate.
 620         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 621         (enum cris_interrupt_type, crisv10deliver_interrupt)
 622         (crisv32deliver_interrupt: New declarations.
 623         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 624         sim_events_tickn and set state-events member work_pending when it's
 625         time for the next event.
 626         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 627         interrupt-delivery function.
 628         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 629         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 630         * cris/devices.c: Include hw-device.h.
 631         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 632         (device_io_write_buffer): Only perform 0x900000xx-functions if
 633         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 634         call hw_io_write_buffer.  Add return 0 last in function.
 635         * cris/sim-if.c (cris_have_900000xxif): Now global.
 636         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 637         Force "-model" option, effectively.
 638         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 639         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 640
 641 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 642
 643         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 644         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 645         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 646
 647 2006-03-13  DJ Delorie  <dj@redhat.com>
 648
 649         * MAINTAINERS: Add self as m32c sim maintainer.
 650
 651 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 652
 653         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 654         mapping.
 655         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 656
 657 2006-01-23  Jim Blandy  <jimb@redhat.com>
 658
 659         Add simulator for Renesas M32C and M16C.
 660
 661         * m32c: New directory.
 662         * configure.ac: Add entry for Renesas M32C.
 663         * configure: Regenerate.
 664
 665 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 666
 667         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 668         cycle count for the current insn.
 669
 670 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 671
 672         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 673         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 674         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 675         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 676
 677 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 678
 679         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 680         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 681         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 682         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 683         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 684         cris/semcrisv32f-switch.c: Regenerate.
 685
 686 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 687
 688         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 689         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 690         TARGET_O_WRONLY.
 691         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 692         F_GETFL on fd 0, 1 and 2.
 693
 694 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 695
 696         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 697         last_open_fd, last_open_flags.
 698         * cris/traps.c: Don't include targ-vals.h.
 699         (TARGET_O_ACCMODE): Define.
 700         (cris_break_13_handler): Set new _sim_cpu members.
 701         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 702         Rearrange code as switch.  Emit "unimplemented" abort for
 703         unimplemented fcntl calls.
 704
 705         * cris/traps.c (TARGET_SYS_stat): Define.
 706         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 707         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 708
 709 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 710
 711         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 712         low 32 bits are used after an unsigned long cast.
 713
 714 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 715
 716         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 717
 718 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 719
 720         * MAINTAINERS: Update my mail address, move myself to the
 721         "Past maintainers" section.
 722
 723 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 724
 725         * configure.ac: Add igen to v850 build.
 726         * configure: Regenerate.
 727
 728 2005-04-29  Paul Brook  <paul@codesourcery.com>
 729
 730         * common/callback.c (PIPE_BUF): Provide default definition.
 731         (os_lstat): Use stat if lstat is not available on the host.
 732         (os_ftruncate): Return EINVAL if not available on the host.
 733         (os_truncate): Ditto.
 734         * common/configure.ac: Check for lstat, truncate and ftruncate.
 735         * common/configure: Regenerate.
 736         * common/config.in: Regenerate.
 737
 738 2005-04-27  Paul Brook  <paul@codesourcery.com>
 739
 740         * common/Make-common.in: Add $(EXEEXT) to "run".
 741
 742 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 743
 744         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 745         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 746         implemented.  In call to create_map, pad length argument to 8k.
 747
 748 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 749
 750         * configure.ac: Add explicit sh64 case.
 751         * configure: Regenerate.
 752
 753 2005-03-30  Paul Brook  <paul@codesourcery.com>
 754
 755         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 756
 757 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 758
 759         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 760         include cgen-ops.h in decodev10.c and decodev32.c.
 761         * cris/sim-main.h: Don't include cgen-ops.h here.
 762         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 763         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 764         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 765         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 766         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 767         cris/semcrisv32f-switch.c: Regenerate.
 768
 769         * cris/traps.c (cris_break_13_handler) <case
 770         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 771         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 772
 773 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 774
 775         * cris/configure: Regenerate.
 776
 777 2005-02-28  Jim Blandy  <jimb@redhat.com>
 778
 779         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 780         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 781         Regenerated, after change to common/aclocal.m4.
 782
 783 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 784
 785         * iq2000: New target subdirectory.
 786         * configure.ac: Add iq2000 target.
 787         * configure: Regenerate.
 788
 789 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 790
 791         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 792         (realclean, install): Fail if subdir make failed.
 793
 794 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 795
 796         * cris: New directory, simulator for Axis Communications CRIS
 797         including CRIS v32, CGEN-based.
 798         * configure.ac: Add corresponding configury.
 799         * configure: Regenerate.
 800
 801 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 802
 803         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 804         common directory.  Remove sparc*-*-* from list.
 805
 806 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 807
 808         * Makefile.in (autoconf-common autoheader-common): Add --force to
 809         autoconf and autoheader.
 810         (autoconf-common autoheader-common)
 811         (autoconf-install autoheader-install): Check for configure.ac, not
 812         configure.in.
 813         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 814         * configure: Re-generate.
 815
 816 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 817
 818         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 819         correctly calls AC_CONFIG_SUBDIRS.
 820         * configure: Re-generate.
 821
 822 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 823
 824         * i960, h8500: Delete directory.
 825
 826 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 827
 828         * d30v, fr30, mn10200, z8k: Delete directory.
 829
 830 2004-03-10  Ben Elliston  <bje@gnu.org>
 831
 832         * MAINTAINERS: Update my mail address.
 833
 834 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 835
 836         * configure.in (mips*-*-*): Configure in testsuite.
 837         * configure: Regenerate.
 838
 839 2003-10-08  Dave Brolley  <brolley@redhat.com>
 840
 841         * configure.in: Move frv handling to alphabetically correct placement.
 842
 843 2003-09-03  Andreas Schwab  <schwab@suse.de>
 844
 845         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 846
 847 2003-08-29  Dave Brolley  <brolley@redhat.com>
 848
 849         * MAINTAINERS: Add myself as maintainer of the FRV port.
 850
 851 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 852             Dave Brolley  <brolley@redhat.com>
 853
 854         * frv/: New directory, simulator for the Fujitsu FRV.
 855         * configure.in: Add frv configury.
 856         * configure: Regenerate.
 857
 858 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 859
 860         * MAINTAINERS: Update my mail address.
 861
 862 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 863
 864         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 865         maintenance.  List igen and sh maintainers.  Mention that target
 866         and global maintainers pick up the slack.
 867
 868 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 869
 870         * configure.in: Add testsuite to extra_subdirs for sh.
 871         * configure: Regenerate.
 872
 873 2003-01-23  Nick Clifton  <nickc@redhat.com>
 874
 875         * Add sh2e support:
 876
 877 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 878
 879         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 880
 881 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 882
 883         * MAINTAINERS: Update my email address.
 884
 885 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 886
 887         * w65/: Delete directory.
 888
 889 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 890
 891         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 892         * configure: Re-generate.
 893
 894 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 895
 896         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 897         * configure: Re-generate.
 898
 899 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 900
 901         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 902         id, date and host to be overriden by NAME, ID, DATE and HOST
 903         respectfully.  Use ISO dates.
 904
 905 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 906
 907         * Makefile.in (ChangeLog): New makefile variable.
 908         * README-HACKING: Mention the ChangeLog makefile variable.
 909
 910 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 911
 912         * tic80/: Delete directory.
 913
 914 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 915
 916         * MAINTAINERS: Update my email address.
 917
 918 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 919
 920         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 921
 922 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 923
 924         * MAINTAINERS: Record self as a co-maintainer of just common/.
 925
 926 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 927
 928         * MAINTAINERS: Point to GDB files describing overall maintaince
 929         and check-in procedures.
 930
 931 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 932
 933         * MAINTAINERS: Add myself for ARM portions.
 934
 935 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 936
 937         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 938         * configure: Re-generate.
 939
 940 2001-02-16  Ben Elliston  <bje@redhat.com>
 941
 942         * MAINTAINERS: Add myself for common portions.
 943
 944 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 945
 946         * MAINTAINERS: Added self and Andrew for the mips sim.
 947
 948 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 949
 950         * MAINTAINERS: Added self and Andrew for the ppc sim.
 951
 952 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 953
 954         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 955         * m68hc11: New directory.
 956         * configure.in: Add.
 957         * configure: Regenerate.
 958
 959 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 960
 961         * tic80: New directory.
 962         * configure.in: Add configury.
 963         * configure: Regenerate.
 964
 965 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 966
 967         * configure.in (extra_subdirs): Add testsuite to strongarm
 968         directories.
 969         * configure: Regenerate.
 970
 971 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 972
 973         * MAINTAINERS: New file.  Blank.
 974
 975 1999-11-18  Ben Elliston  <bje@cygnus.com>
 976
 977         * configure.in: Require autoconf 2.13 and remove obsolete
 978         invocation of AC_C_CROSS.
 979         * configure: Regenerate.
 980
 981 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 982
 983         * configure.in: Configure the testsuite directory for thumb.
 984         * configure: Regenerate.
 985
 986 1999-07-16  Ben Elliston  <bje@cygnus.com>
 987
 988         * configure.in: Configure the testsuite directory for arm.
 989         * configure: Regenerate.
 990
 991 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 992
 993         * configure.in: Add support for MCore target.
 994         * configure: Regenerate.
 995
 996 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 997
 998         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 999         RUNTEST instead of commenting out, fixes portability problem.
1000
1001 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1002
1003         * configure.in: Add support for StrongARM target.
1004         * configure: Regenerate.
1005
1006 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1007
1008         * configure.in: Require autoconf 2.12.1 or higher.
1009
1010 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1011
1012         * configure.in (i960-*-*): Add.
1013         * configure: Rebuild.
1014
1015 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1016
1017         * configure.in: Added case for fr30-*-*.
1018         * configure: Regenerated.
1019
1020 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1021
1022         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1023         to allow successful operation on Windows.
1024
1025 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1026
1027         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1028         check can be invoked recursively.
1029
1030 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1031
1032         * configure.in: Build simulator on sparclite and sparc86x targets.
1033         * configure: Regenerate.
1034
1035 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1036
1037         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1038         to autoconf and autoheader.
1039
1040 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1041
1042         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1043         ../common' to autoconf and autoheader.  Unconditionally run
1044         autoconf in every subdir.
1045         (autoconf-changelog autoheader-changelog): Unconditionally run
1046         commands in every subdir.
1047         (autoconf-install autoheader-install): Likewise.
1048
1049 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1050
1051         * Makefile.in:  Get SHELL from configure.
1052         * (FLAGS_TO_PASS):  Pass down SHELL.
1053         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1054         NT native builds.
1055
1056 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1057
1058         * configure.in (extra_subdirs): Enable igen for mn10300.
1059         * configure: Re-generate.
1060
1061 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1062
1063         * configure.in (extra_subdirs): Add support for thumb target.
1064
1065         * configure (extra_subdirs): Add support for thumb target.
1066
1067 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1068
1069         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1070         target.
1071         * configure: Regenerate.
1072
1073 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1074
1075         * configure.in (extra_subdirs): v850ea needs igen.
1076         * configure: Re-generate.
1077
1078 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1079
1080         * configure.in (testdir): When a testsuite directory, add that to
1081         the list of confdirs.
1082
1083 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1084
1085         * configure.in (extra_subdirs): Enable igen ready for V850.
1086
1087 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1088
1089         * configure.in (w65-*-*, only_if_enabled): Set.
1090         * configure: Re-generate.
1091
1092 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1093
1094         * configure.in (sparc*-*-*, only_if_enabled): Set
1095         only_if_enabled=yes.  Check only_if_enabled before enabling a
1096         simulator.
1097         * configure: Regenerate.
1098
1099 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1100
1101         * configure.in (extra_subdirs): Add v850e target.
1102
1103 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1104
1105         * configure.in (extra_subdirs): Add v850ea target.
1106
1107 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1108
1109         * configure.in (sparc*-*-*): Don't build erc32.
1110         * configure: Regenerate.
1111
1112 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1113
1114         * configure.in (m32r-*-*): New target.
1115         * configure: Regenerate.
1116
1117         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1118
1119 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1120
1121         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1122         thought that .NOEXPORT was the default target.
1123
1124 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1125
1126         * Makefile.in (clean mostlyclean): Restore targets accidentally
1127         deleted in earlier change.
1128
1129 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1130
1131         * Makefile.in (autoheader-common, autoheader-changelog,
1132         autoheader-install): Perform autoheader in addition to autoconf.
1133
1134 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1135
1136         * Makefile.in (autoconf-install): New target.
1137         (autoconf-changelog): Try different way to obtain user name.
1138
1139 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1140
1141         * Makefile.in (autoconf-changelog): New target, update
1142         ChangeLog for all subdirectories - normally used after
1143         autoconf-common target.
1144
1145 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1146
1147         * configure.in (extra_subdirs): Include testsuite for d30v.
1148         * configure: Regenerate.
1149
1150         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1151         ../gdb/Makefile.in
1152         (check): New rules - drive the testsuite.
1153
1154 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1155
1156         * configure.in: Add mn10200 configure lines accidentally
1157         removed.
1158         * configure: Regenerated.
1159
1160 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1161
1162         * configure.in (extra_subdirs): Generalize common sub directory
1163         into a list.
1164         (extra_subdirs): For d30v add igen to the list to be built.
1165
1166 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1167
1168         * configure.in (d30v): New target.
1169         * configure: Regenerated.
1170
1171 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1172
1173         * configure.in: Don't require GCC to build the mn10200
1174         simulator anymore.
1175         * configure: Rebuilt.
1176
1177 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1178
1179         * configure.in: Don't configure any subdirs if no simulator
1180         is being built.  Don't use erc32 for sparc64.
1181         * configure: Regenerated.
1182
1183 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1184
1185         * Makefile.in (autoconf-common): New target.
1186         * configure.in: Do configure common.
1187         * configure: Regenerated.
1188
1189 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1190
1191         * configure configure.in:  Don't configure common anymore.  Files
1192         from common are now built in the individual simualtor directories.
1193         This fixes problems with the WinGDB build procedure.
1194
1195 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1196
1197         * configure: Enable the mn10200 simulator.
1198
1199 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1200
1201         * configure.in (configdirs): Add common.
1202         * configure: Regenerated.
1203
1204 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1205
1206         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1207         system V based targets.
1208         * configure: Regenerate.
1209
1210 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1211
1212         * configure.in (--enable-sim-powerpc): Delete.
1213         (--enable-sim): Add.
1214         * configure: Regenerated.
1215
1216 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1217
1218         * configure.in: Only build the V850 simulator if
1219         we are using gcc.
1220         * configure: Rebuild.
1221
1222 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1223
1224         * configure.in: Do build erc32 for DOS and Windows hosts.
1225         * configure: Rebuild.
1226
1227 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1228
1229         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1230         be inherited from the parent.  Remove INSTALL_XFORM and
1231         INSTALL_XFORM1.  Make INSTALL be set from configure.
1232
1233 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1234
1235         * configure.in: Only build the MIPS simulator if we are using
1236         gcc.
1237         * configure: Rebuild.
1238
1239 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1240
1241         * configure.in (v850-*-*): Added V850 simulator.
1242
1243 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1244
1245         * configure.in (d10v-*-*): Added D10V simulator.
1246
1247 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1248
1249         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1250         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1251         (docdir): Removed.
1252         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1253         (AC_PROG_INSTALL): Added.
1254         * configure: Rebuilt.
1255
1256 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1257
1258         * configure.in: Only configure erc32 if using gcc.
1259         * configure: Rebuild.
1260
1261 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1262
1263         * configure.in (sim_target): Build PowerPC simulator for powerpc
1264         System V.4, Solaris, and Elf targets.
1265         * configure: Regenerate with autoconf 2.10.
1266
1267 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1268
1269         * configure.in: Only built erc32 simulator on Unix hosts as it
1270         uses pseudo ttys.
1271         * configure: Regenerated with autoconf 2.8.
1272
1273 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1274
1275         * erc32: Sparc simulator from the ESA.
1276
1277 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1278
1279         From: Miles Bader  <miles@gnu.ai.mit.edu>
1280         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1281         * configure: Regenerate using autoconf.
1282
1283 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1284
1285         * Makefile.in (install): Fix typo.
1286
1287 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1288
1289         * configure: Regenerate with autoconf 2.7.
1290
1291         * Makefile.in (all): Simplify.
1292         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1293         as in the all target.
1294         (distclean, maintainer-clean, realclean): Likewise.
1295         (install): Likewise.
1296
1297 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1298
1299         * Makefile.in (all): Remove extra '\' char from shell script.
1300
1301 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1302
1303         * Makefile.in (all): Avoid a for loop with zero elements, even if
1304         the loop will not be executed because of an if statement.
1305
1306 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1307
1308         * Makefile.in (install): Add missing semicolon in "fi \".
1309
1310 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1311
1312         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1313         defaults from configure.
1314
1315         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1316         configure defaults.
1317         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1318         if either --enable-sim-powerpc is used, or the host compiler is
1319         GCC.
1320
1321 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1322
1323         * configure.in (mips*-*-*): Added "mips" simulator target.
1324         * configure: Re-generated.
1325
1326 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1327
1328         * Makefile.in (BISON): Remove macro.
1329         (FLAGS_TO_PASS): Remove BISON.
1330
1331 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1332
1333         * configure.in:  Explicitly `exit 0' for broken shells.
1334         * configure:  Rebuilt.
1335
1336 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1337
1338         * common/run.c (main): Initialize the callbacks.
1339
1340 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1341
1342         * Makefile.in (maintainer-clean): New synonym for realclean.
1343
1344 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1345
1346         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1347         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1348
1349 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1350
1351         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1352         <cagney@highland.com.au>.
1353         * configure: Regnerate from configure.in.
1354
1355 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1356
1357         * Update all FSF addresses except those in COPYING* files.
1358
1359 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1360
1361         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1362         submakes either default or passed in value.
1363
1364 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1365
1366         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1367           install): Changed targets so that they descend all
1368           subdirectories in $(SUBDIRS).
1369           (*-all, *-clean, *-install): Removed targets.
1370
1371         * configure.in: Don't bother with target makefile fragments, they
1372           are no longer needed.
1373         * configure: regenerated.
1374
1375         * Makefile.in, configure.in: converted to autoconf.
1376         * configure: New file, generated with autconf 2.4.
1377
1378 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1379
1380         * Makefile.in: Support ARM.
1381         * configure.in: Ditto.
1382
1383 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1384
1385         * Makefile.in: Support W65.
1386         * configure.in: Ditto.
1387
1388 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1389
1390         * Makefile.in: Add TAGS target.
1391
1392 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1393
1394         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1395           install-h8300, clean-h8300, all-h8500, install-h8500,
1396           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1397           recursion lines.
1398
1399 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1400
1401         * Makefile.in: remove endian.h trace from h8500
1402
1403 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1404
1405         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1406
1407 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1408
1409         * Makefile.in: make all of the all-* target (except all-nothing)
1410         depend on endian.h, so that if we're not building a simulator, we
1411         don't built endian
1412
1413 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1414
1415         * Makefile.in (check, installcheck): Added dummy targets.
1416
1417 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1418
1419         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1420         explicitly make it, since some makes apparently don't work with
1421         VPATH and .c to executable rules (SunOS make for example).
1422
1423 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1424
1425         * Makefile.in (endian): Add explicit rule for broken makes.
1426
1427 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1428
1429         * Makefile.in (info, install-info): New targets.
1430         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1431         level Makefile.
1432
1433 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1434
1435         * Makefile.in (endian.h): build endian.h via a temporary file so
1436           that we don't leave an incomplete file lying around on
1437           interrupted builds.
1438           (clean): remove endian, e.h, and endian.h.
1439
1440 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1441
1442         * Makefile.in, configure.in: if target isn't supported, build a
1443         harmless makefile.
1444
1445