1 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
3 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
4 (TARGET_X_OK, TARGET_F_OK): Define.
5 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
7 * cris/semcrisv32f-switch.c: Regenerate.
9 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
11 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
12 just a short CRIS-specific notice. Tweak the wording for a
13 failing architecture test.
15 * cris/traps.c (TARGET_SYS_writev): New macro.
16 (is_mapped_only, cris_dump_map): New functions.
17 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
18 and prot combinations and a non-zero page-offset. If
19 TARGET_MAP_FIXED, unmap pages before mapping them.
20 <case TARGET_SYS_mprotect>: When checking, allow any length
21 argument. Don't actually do anything.
22 <case TARGET_SYS_writev>: New case.
24 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
25 * cris/sim-if.c: Include elf-bfd.h.
26 (struct progbounds): New members end_loadmem, start_nonloadmem.
27 (xprintf, eprintf): New functions, copied from common/sim-load.c.
28 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
29 (get_progbounds_iterator): Renamed from get_progbounds. Make
30 static. Update head comment. Set new struct progbounds members.
31 (exec_load_addr, interp_load_addr, interp_start_addr): New static
33 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
34 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
36 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
37 handling to use auxv_entries. Improve error message and checking
38 for invalid programs. Use new variable abfd for the program
39 instead of for each access reaching into sd to get it.
40 (sim_create_inferior): If non-zero, use interp_start_addr instead
41 of the program start address.
42 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
43 stale comment. Always specify little-endian.
45 2008-07-29 Nick Clifton <nickc@redhat.com>
47 * common/genmloop.sh: Add new parameter: -shell to specify the
48 command interpreter to use to run the input file. This is
49 necessary because otherwise SHELL is taken from the user's
50 environment, and not from the makefile that invoked this script
51 and the user might not be running an sh-like shell.
52 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
53 * fr30/Makefile.in: Likewise.
54 * frv/Makefile.in: Likewise.
55 * i960/Makefile.in: Likewise.
56 * iq2000/Makefile.in: Likewise.
57 * m32r/Makefile.in: Likewise.
59 * frv/mloop.in: Add missing start of line comment marker.
61 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
63 * cris/configure: Regenerate to track ../common/common.m4 changes.
64 * cris/config.in: Ditto.
66 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
67 Daniel Jacobowitz <dan@codesourcery.com>
68 Joseph Myers <joseph@codesourcery.com>
70 * cris/configure: Regenerate.
72 2008-05-09 Olivier Hainque <hainque@adacore.com>
74 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
76 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
78 * MAINTAINERS: Add myself as maintainer of cr16 port.
80 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
82 Add simulator for National cr16 processor.
83 * cr16: New directory.
84 * configure.ac: Add entry for National cr16.
85 * configure: Regenerate.
87 2008-02-05 DJ Delorie <dj@redhat.com>
89 * configure.ac (v850): V850 now has a testsuite.
90 * configure (v850): Likewise.
92 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
94 Updated copyright notices for most files.
96 2007-12-19 DJ Delorie <dj@redhat.com>
98 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
101 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
103 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
104 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
105 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
106 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
107 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
108 cris/semcrisv32f-switch.c: Regenerate.
110 2007-08-24 Joel Brobecker <brobecker@adacore.com>
112 Switch the license of all files explicitly copyright the FSF
115 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
117 * Makefile.in: Add dummy "pdf" target.
119 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
121 * cris/traps.c (dump_statistics): Change format for cycle numbers
122 to %llu and cast parameters to unsigned long long.
124 2007-02-16 Thiemo Seufer <ths@mips.com>
126 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
128 2007-01-28 Manuel Lauss <slauss@resi.at>
130 * configure.ac (sh64-*-*): Change to sh64*-*-*.
131 (sh-*-*): Change to sh*-*-*.
132 * configure: Regenerated.
134 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
136 Updated copyright notices for most files.
138 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
140 * Makefile.in (autoconf-common autoheader-common): Only run
141 autoheader on subdirs with a file config.in.
143 * configure.ac (common): Make the default "yes" for all targets
145 * configure: Regenerate.
147 * Makefile.in (autoconf-common autoheader-common): In documented
148 usage, say SHELL=/bin/sh.
149 (.PHONY): Add autoheader-common.
151 * MAINTAINERS: Add self as authorized committer for *.
153 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
154 Hans-Peter Nilsson <hp@axis.com>
156 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
157 (cris_unknown_syscall_action): Declare.
158 * cris/sim-if.c (cris_unknown_syscall_action): Define.
159 (cris_options): Add cris-unknown-syscall option.
160 (cris_option_handler): Correct comment about and error message for
161 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
162 * cris/traps.c: Include stdarg.h
163 (cris_unknown_syscall): New function.
164 (cris_break_13_handler): Instead of sim_io_eprintf and
165 sim_engine_halt, call cris_unknown_syscall to handle more or less
166 unknown syscalls. Adjust code as necessary to handle return
169 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
171 * MAINTAINERS: Add Dave Brolley for sh64.
173 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
175 * cris/traps.c (TARGET_PIPE_BUF): New macro.
176 (cris_pipe_empty): Correct initialization of "remaining". Only
177 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
180 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
182 * cris/configure.ac: Check for limits.h and sys/param.h.
183 * cris/configure, cris/config.in: Rebuild.
184 * cris/traps.c (SIM_PATHMAX): New macro.
185 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
187 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
189 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
190 * Makefile.in (FLAGS_TO_PASS): Include libdir.
191 * configure: Regenerated.
193 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
195 * cris/configure: Regenerated.
197 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
199 * cris/configure: Regenerated.
201 2006-05-05 Andreas Schwab <schwab@suse.de>
203 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
204 * configure: Regenerate.
206 * Makefile.in (CFLAGS_FOR_BUILD): Define.
207 (CC_FOR_BUILD): Don't override.
208 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
210 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
212 * MAINTAINERS: Add an "Authorized committers" section, and list
215 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
217 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
219 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
221 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
222 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
223 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
224 (all): Depend on rvdummy$(EXEEXT).
225 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
226 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
228 * cris/configure: Regenerate.
229 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
230 (enum cris_interrupt_type, crisv10deliver_interrupt)
231 (crisv32deliver_interrupt: New declarations.
232 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
233 sim_events_tickn and set state-events member work_pending when it's
234 time for the next event.
235 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
236 interrupt-delivery function.
237 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
238 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
239 * cris/devices.c: Include hw-device.h.
240 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
241 (device_io_write_buffer): Only perform 0x900000xx-functions if
242 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
243 call hw_io_write_buffer. Add return 0 last in function.
244 * cris/sim-if.c (cris_have_900000xxif): Now global.
245 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
246 Force "-model" option, effectively.
247 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
248 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
250 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
252 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
253 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
254 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
256 2006-03-13 DJ Delorie <dj@redhat.com>
258 * MAINTAINERS: Add self as m32c sim maintainer.
260 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
262 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
264 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
266 2006-01-23 Jim Blandy <jimb@redhat.com>
268 Add simulator for Renesas M32C and M16C.
270 * m32c: New directory.
271 * configure.ac: Add entry for Renesas M32C.
272 * configure: Regenerate.
274 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
276 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
277 cycle count for the current insn.
279 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
281 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
282 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
283 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
284 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
286 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
288 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
289 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
290 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
291 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
292 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
293 cris/semcrisv32f-switch.c: Regenerate.
295 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
297 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
298 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
300 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
301 F_GETFL on fd 0, 1 and 2.
303 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
305 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
306 last_open_fd, last_open_flags.
307 * cris/traps.c: Don't include targ-vals.h.
308 (TARGET_O_ACCMODE): Define.
309 (cris_break_13_handler): Set new _sim_cpu members.
310 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
311 Rearrange code as switch. Emit "unimplemented" abort for
312 unimplemented fcntl calls.
314 * cris/traps.c (TARGET_SYS_stat): Define.
315 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
316 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
318 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
320 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
321 low 32 bits are used after an unsigned long cast.
323 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
325 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
327 2005-05-26 Chris Demetriou <cgd@netbsd.org>
329 * MAINTAINERS: Update my mail address, move myself to the
330 "Past maintainers" section.
332 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
334 * configure.ac: Add igen to v850 build.
335 * configure: Regenerate.
337 2005-04-29 Paul Brook <paul@codesourcery.com>
339 * common/callback.c (PIPE_BUF): Provide default definition.
340 (os_lstat): Use stat if lstat is not available on the host.
341 (os_ftruncate): Return EINVAL if not available on the host.
342 (os_truncate): Ditto.
343 * common/configure.ac: Check for lstat, truncate and ftruncate.
344 * common/configure: Regenerate.
345 * common/config.in: Regenerate.
347 2005-04-27 Paul Brook <paul@codesourcery.com>
349 * common/Make-common.in: Add $(EXEEXT) to "run".
351 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
353 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
354 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
355 implemented. In call to create_map, pad length argument to 8k.
357 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
359 * configure.ac: Add explicit sh64 case.
360 * configure: Regenerate.
362 2005-03-30 Paul Brook <paul@codesourcery.com>
364 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
366 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
368 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
369 include cgen-ops.h in decodev10.c and decodev32.c.
370 * cris/sim-main.h: Don't include cgen-ops.h here.
371 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
372 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
373 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
374 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
375 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
376 cris/semcrisv32f-switch.c: Regenerate.
378 * cris/traps.c (cris_break_13_handler) <case
379 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
380 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
382 2005-03-23 Mark Kettenis <kettenis@gnu.org>
384 * cris/configure: Regenerate.
386 2005-02-28 Jim Blandy <jimb@redhat.com>
388 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
389 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
390 Regenerated, after change to common/aclocal.m4.
392 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
394 * iq2000: New target subdirectory.
395 * configure.ac: Add iq2000 target.
396 * configure: Regenerate.
398 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
400 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
401 (realclean, install): Fail if subdir make failed.
403 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
405 * cris: New directory, simulator for Axis Communications CRIS
406 including CRIS v32, CGEN-based.
407 * configure.ac: Add corresponding configury.
408 * configure: Regenerate.
410 2005-01-17 Andrew Cagney <cagney@gnu.org>
412 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
413 common directory. Remove sparc*-*-* from list.
415 2005-01-11 Andrew Cagney <cagney@gnu.org>
417 * Makefile.in (autoconf-common autoheader-common): Add --force to
418 autoconf and autoheader.
419 (autoconf-common autoheader-common)
420 (autoconf-install autoheader-install): Check for configure.ac, not
422 * configure.ac: Delete AC_CONFIG_AUX_DIR.
423 * configure: Re-generate.
425 2005-01-07 Andrew Cagney <cagney@gnu.org>
427 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
428 correctly calls AC_CONFIG_SUBDIRS.
429 * configure: Re-generate.
431 2004-12-01 Andrew Cagney <cagney@gnu.org>
433 * i960, h8500: Delete directory.
435 2004-11-12 Andrew Cagney <cagney@gnu.org>
437 * d30v, fr30, mn10200, z8k: Delete directory.
439 2004-03-10 Ben Elliston <bje@gnu.org>
441 * MAINTAINERS: Update my mail address.
443 2004-01-26 Chris Demetriou <cgd@broadcom.com>
445 * configure.in (mips*-*-*): Configure in testsuite.
446 * configure: Regenerate.
448 2003-10-08 Dave Brolley <brolley@redhat.com>
450 * configure.in: Move frv handling to alphabetically correct placement.
452 2003-09-03 Andreas Schwab <schwab@suse.de>
454 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
456 2003-08-29 Dave Brolley <brolley@redhat.com>
458 * MAINTAINERS: Add myself as maintainer of the FRV port.
460 2003-08-20 Michael Snyder <msnyder@redhat.com>
461 Dave Brolley <brolley@redhat.com>
463 * frv/: New directory, simulator for the Fujitsu FRV.
464 * configure.in: Add frv configury.
465 * configure: Regenerate.
467 2003-08-10 Ben Elliston <bje@wasabisystems.com>
469 * MAINTAINERS: Update my mail address.
471 2003-08-09 Andrew Cagney <cagney@redhat.com>
473 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
474 maintenance. List igen and sh maintainers. Mention that target
475 and global maintainers pick up the slack.
477 2003-07-09 Michael Snyder <msnyder@redhat.com>
479 * configure.in: Add testsuite to extra_subdirs for sh.
480 * configure: Regenerate.
482 2003-01-23 Nick Clifton <nickc@redhat.com>
486 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
488 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
490 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
492 * MAINTAINERS: Update my email address.
494 2002-07-17 Andrew Cagney <ac131313@redhat.com>
496 * w65/: Delete directory.
498 2002-07-16 Andrew Cagney <ac131313@redhat.com>
500 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
501 * configure: Re-generate.
503 2002-07-13 Andrew Cagney <ac131313@redhat.com>
505 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
506 * configure: Re-generate.
508 2002-06-16 Andrew Cagney <ac131313@redhat.com>
510 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
511 id, date and host to be overriden by NAME, ID, DATE and HOST
512 respectfully. Use ISO dates.
514 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
516 * Makefile.in (ChangeLog): New makefile variable.
517 * README-HACKING: Mention the ChangeLog makefile variable.
519 2002-06-01 Andrew Cagney <ac131313@redhat.com>
521 * tic80/: Delete directory.
523 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
525 * MAINTAINERS: Update my email address.
527 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
529 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
531 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
533 * MAINTAINERS: Record self as a co-maintainer of just common/.
535 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
537 * MAINTAINERS: Point to GDB files describing overall maintaince
538 and check-in procedures.
540 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
542 * MAINTAINERS: Add myself for ARM portions.
544 2001-10-19 Andrew Cagney <ac131313@redhat.com>
546 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
547 * configure: Re-generate.
549 2001-02-16 Ben Elliston <bje@redhat.com>
551 * MAINTAINERS: Add myself for common portions.
553 2001-01-15 Chris Demetriou <cgd@broadcom.com>
555 * MAINTAINERS: Added self and Andrew for the mips sim.
557 2000-10-25 Geoff Keating <geoffk@cygnus.com>
559 * MAINTAINERS: Added self and Andrew for the ppc sim.
561 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
563 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
564 * m68hc11: New directory.
566 * configure: Regenerate.
568 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
570 * tic80: New directory.
571 * configure.in: Add configury.
572 * configure: Regenerate.
574 2000-04-20 Nick Clifton <nickc@cygnus.com>
576 * configure.in (extra_subdirs): Add testsuite to strongarm
578 * configure: Regenerate.
580 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
582 * MAINTAINERS: New file. Blank.
584 1999-11-18 Ben Elliston <bje@cygnus.com>
586 * configure.in: Require autoconf 2.13 and remove obsolete
587 invocation of AC_C_CROSS.
588 * configure: Regenerate.
590 1999-09-29 Doug Evans <devans@casey.cygnus.com>
592 * configure.in: Configure the testsuite directory for thumb.
593 * configure: Regenerate.
595 1999-07-16 Ben Elliston <bje@cygnus.com>
597 * configure.in: Configure the testsuite directory for arm.
598 * configure: Regenerate.
600 1999-04-08 Nick Clifton <nickc@cygnus.com>
602 * configure.in: Add support for MCore target.
603 * configure: Regenerate.
605 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
607 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
608 RUNTEST instead of commenting out, fixes portability problem.
610 1999-02-08 Nick Clifton <nickc@cygnus.com>
612 * configure.in: Add support for StrongARM target.
613 * configure: Regenerate.
615 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
617 * configure.in: Require autoconf 2.12.1 or higher.
619 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
621 * configure.in (i960-*-*): Add.
622 * configure: Rebuild.
624 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
626 * configure.in: Added case for fr30-*-*.
627 * configure: Regenerated.
629 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
631 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
632 to allow successful operation on Windows.
634 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
636 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
637 check can be invoked recursively.
639 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
641 * configure.in: Build simulator on sparclite and sparc86x targets.
642 * configure: Regenerate.
644 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
646 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
647 to autoconf and autoheader.
649 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
651 * Makefile.in (autoconf-common autoheader-common): Pass `-l
652 ../common' to autoconf and autoheader. Unconditionally run
653 autoconf in every subdir.
654 (autoconf-changelog autoheader-changelog): Unconditionally run
655 commands in every subdir.
656 (autoconf-install autoheader-install): Likewise.
658 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
660 * Makefile.in: Get SHELL from configure.
661 * (FLAGS_TO_PASS): Pass down SHELL.
662 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
665 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
667 * configure.in (extra_subdirs): Enable igen for mn10300.
668 * configure: Re-generate.
670 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
672 * configure.in (extra_subdirs): Add support for thumb target.
674 * configure (extra_subdirs): Add support for thumb target.
676 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
678 * configure.in (extra_subdirs): Add IGEN directory when MIPS
680 * configure: Regenerate.
682 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
684 * configure.in (extra_subdirs): v850ea needs igen.
685 * configure: Re-generate.
687 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
689 * configure.in (testdir): When a testsuite directory, add that to
690 the list of confdirs.
692 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
694 * configure.in (extra_subdirs): Enable igen ready for V850.
696 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
698 * configure.in (w65-*-*, only_if_enabled): Set.
699 * configure: Re-generate.
701 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
703 * configure.in (sparc*-*-*, only_if_enabled): Set
704 only_if_enabled=yes. Check only_if_enabled before enabling a
706 * configure: Regenerate.
708 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
710 * configure.in (extra_subdirs): Add v850e target.
712 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
714 * configure.in (extra_subdirs): Add v850ea target.
716 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
718 * configure.in (sparc*-*-*): Don't build erc32.
719 * configure: Regenerate.
721 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
723 * configure.in (m32r-*-*): New target.
724 * configure: Regenerate.
726 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
728 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
730 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
731 thought that .NOEXPORT was the default target.
733 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
735 * Makefile.in (clean mostlyclean): Restore targets accidentally
736 deleted in earlier change.
738 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
740 * Makefile.in (autoheader-common, autoheader-changelog,
741 autoheader-install): Perform autoheader in addition to autoconf.
743 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
745 * Makefile.in (autoconf-install): New target.
746 (autoconf-changelog): Try different way to obtain user name.
748 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
750 * Makefile.in (autoconf-changelog): New target, update
751 ChangeLog for all subdirectories - normally used after
752 autoconf-common target.
754 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
756 * configure.in (extra_subdirs): Include testsuite for d30v.
757 * configure: Regenerate.
759 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
761 (check): New rules - drive the testsuite.
763 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
765 * configure.in: Add mn10200 configure lines accidentally
767 * configure: Regenerated.
769 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
771 * configure.in (extra_subdirs): Generalize common sub directory
773 (extra_subdirs): For d30v add igen to the list to be built.
775 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
777 * configure.in (d30v): New target.
778 * configure: Regenerated.
780 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
782 * configure.in: Don't require GCC to build the mn10200
784 * configure: Rebuilt.
786 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
788 * configure.in: Don't configure any subdirs if no simulator
789 is being built. Don't use erc32 for sparc64.
790 * configure: Regenerated.
792 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
794 * Makefile.in (autoconf-common): New target.
795 * configure.in: Do configure common.
796 * configure: Regenerated.
798 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
800 * configure configure.in: Don't configure common anymore. Files
801 from common are now built in the individual simualtor directories.
802 This fixes problems with the WinGDB build procedure.
804 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
806 * configure: Enable the mn10200 simulator.
808 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
810 * configure.in (configdirs): Add common.
811 * configure: Regenerated.
813 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
815 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
816 system V based targets.
817 * configure: Regenerate.
819 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
821 * configure.in (--enable-sim-powerpc): Delete.
823 * configure: Regenerated.
825 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
827 * configure.in: Only build the V850 simulator if
829 * configure: Rebuild.
831 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
833 * configure.in: Do build erc32 for DOS and Windows hosts.
834 * configure: Rebuild.
836 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
838 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
839 be inherited from the parent. Remove INSTALL_XFORM and
840 INSTALL_XFORM1. Make INSTALL be set from configure.
842 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
844 * configure.in: Only build the MIPS simulator if we are using
846 * configure: Rebuild.
848 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
850 * configure.in (v850-*-*): Added V850 simulator.
852 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
854 * configure.in (d10v-*-*): Added D10V simulator.
856 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
858 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
859 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
861 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
862 (AC_PROG_INSTALL): Added.
863 * configure: Rebuilt.
865 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
867 * configure.in: Only configure erc32 if using gcc.
868 * configure: Rebuild.
870 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
872 * configure.in (sim_target): Build PowerPC simulator for powerpc
873 System V.4, Solaris, and Elf targets.
874 * configure: Regenerate with autoconf 2.10.
876 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
878 * configure.in: Only built erc32 simulator on Unix hosts as it
880 * configure: Regenerated with autoconf 2.8.
882 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
884 * erc32: Sparc simulator from the ESA.
886 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
888 From: Miles Bader <miles@gnu.ai.mit.edu>
889 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
890 * configure: Regenerate using autoconf.
892 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
894 * Makefile.in (install): Fix typo.
896 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
898 * configure: Regenerate with autoconf 2.7.
900 * Makefile.in (all): Simplify.
901 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
902 as in the all target.
903 (distclean, maintainer-clean, realclean): Likewise.
906 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
908 * Makefile.in (all): Remove extra '\' char from shell script.
910 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
912 * Makefile.in (all): Avoid a for loop with zero elements, even if
913 the loop will not be executed because of an if statement.
915 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
917 * Makefile.in (install): Add missing semicolon in "fi \".
919 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
921 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
922 defaults from configure.
924 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
926 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
927 if either --enable-sim-powerpc is used, or the host compiler is
930 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
932 * configure.in (mips*-*-*): Added "mips" simulator target.
933 * configure: Re-generated.
935 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
937 * Makefile.in (BISON): Remove macro.
938 (FLAGS_TO_PASS): Remove BISON.
940 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
942 * configure.in: Explicitly `exit 0' for broken shells.
943 * configure: Rebuilt.
945 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
947 * common/run.c (main): Initialize the callbacks.
949 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
951 * Makefile.in (maintainer-clean): New synonym for realclean.
953 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
955 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
956 the target is powerpc*-*-eabisim*, since it requires GCC to build.
958 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
960 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
961 <cagney@highland.com.au>.
962 * configure: Regnerate from configure.in.
964 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
966 * Update all FSF addresses except those in COPYING* files.
968 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
970 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
971 submakes either default or passed in value.
973 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
975 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
976 install): Changed targets so that they descend all
977 subdirectories in $(SUBDIRS).
978 (*-all, *-clean, *-install): Removed targets.
980 * configure.in: Don't bother with target makefile fragments, they
981 are no longer needed.
982 * configure: regenerated.
984 * Makefile.in, configure.in: converted to autoconf.
985 * configure: New file, generated with autconf 2.4.
987 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
989 * Makefile.in: Support ARM.
990 * configure.in: Ditto.
992 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
994 * Makefile.in: Support W65.
995 * configure.in: Ditto.
997 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
999 * Makefile.in: Add TAGS target.
1001 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1003 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1004 install-h8300, clean-h8300, all-h8500, install-h8500,
1005 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1008 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1010 * Makefile.in: remove endian.h trace from h8500
1012 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1014 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1016 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1018 * Makefile.in: make all of the all-* target (except all-nothing)
1019 depend on endian.h, so that if we're not building a simulator, we
1022 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1024 * Makefile.in (check, installcheck): Added dummy targets.
1026 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1028 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1029 explicitly make it, since some makes apparently don't work with
1030 VPATH and .c to executable rules (SunOS make for example).
1032 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1034 * Makefile.in (endian): Add explicit rule for broken makes.
1036 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1038 * Makefile.in (info, install-info): New targets.
1039 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1042 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1044 * Makefile.in (endian.h): build endian.h via a temporary file so
1045 that we don't leave an incomplete file lying around on
1047 (clean): remove endian, e.h, and endian.h.
1049 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1051 * Makefile.in, configure.in: if target isn't supported, build a