sim/bfin/ChangeLog

   1 2011-06-18  Robin Getz  <robin.getz@analog.com>
   2
   3         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
   4         32, perform a left shift.  Update the corresponding AV bit.  Set
   5         AZ when the low 32bits are also zero.
   6
   7 2011-06-18  Robin Getz  <robin.getz@analog.com>
   8
   9         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
  10         call lshift only when count is positive.  Otherwise, call ashiftrt.
  11         With arithmetic right shift insns, call ashiftrt when the value is
  12         small enough, otherwise call lshift.
  13
  14 2011-06-18  Robin Getz  <robin.getz@analog.com>
  15
  16         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
  17         mmod is M_IH rather than computing the result by hand.
  18
  19 2011-06-18  Robin Getz  <robin.getz@analog.com>
  20
  21         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
  22         before saturation, set sat when more cases saturate, and set the
  23         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
  24         M_W32, change the max values compared against.
  25         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
  26         when processing MAC1 and pass v_0 when processing MAC0.  Combine
  27         the results into the V/VS ASTAT bits.
  28
  29 2011-06-18  Robin Getz  <robin.getz@analog.com>
  30
  31         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
  32         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
  33         is M_TFU.
  34
  35 2011-06-18  Robin Getz  <robin.getz@analog.com>
  36
  37         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
  38         allow MM to sign extend all the time.
  39         (decode_macfunc): Likewise.  Drop sign extension of unsigned
  40         values.
  41
  42 2011-06-18  Robin Getz  <robin.getz@analog.com>
  43
  44         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
  45         (decode_macfunc): Likewise when mmod is M_IH.
  46
  47 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * interp.c (sim_create_inferior): Change free to freeargv.
  50
  51 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
  54         (bf537_port): Define applicable devices with PORT to the glue-or
  55         devices instead of SIC.
  56         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
  57         Only parse reg/type when the device has an address.  Move the call
  58         to dv_bfin_hw_port_parse up before slash check.
  59
  60 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
  61
  62         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
  63         BFIN_SIC_TO_CEC_PORTS definition.
  64         (SIC_PORTS): New define.
  65         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
  66         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
  67         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
  68         Delete old layouts.
  69         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
  70         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
  71         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
  72         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
  73         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
  74         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
  75         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
  76         * machs.c (bfin_port_layout): New structure.
  77         (bfin_model_data): Add new "port" and "port_count" members.
  78         (PORT, SIC): New defines.
  79         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
  80         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
  81         Move and redefine port layout from dv-bfin_sic.c to here.
  82         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
  83         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
  84         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
  85         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
  86         bf548_port, bf549_port): New defines.
  87         (bfin_model_data): Link in new bfin_port_layout.port member.
  88         (dv_bfin_hw_port_parse): New function.
  89         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
  90         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
  91         bfin_sic links with new dv_bfin_hw_port_parse function.
  92
  93 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
  94
  95         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
  96
  97 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
  98
  99         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
 100
 101 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 102
 103         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
 104         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
 105         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
 106         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
 107         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
 108         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
 109         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
 110         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
 111         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
 112         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 113         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 114         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 115         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 116         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 117         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 118         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 119         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 120         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 121         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 122         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 123         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 124         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 125         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 126         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 127         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 128         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 129         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 130         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 131         * machs.h: ... here.
 132         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 133
 134 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 135
 136         * Makefile.in (dv-bfin_pfmon.o): New target.
 137         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 138         * configure: Regenerated.
 139         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 140         * machs.c: Add include new bfin_pfmon.h.
 141         (bfin_core_dev): Add pfmon.
 142
 143 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 144
 145         * machs.c (bf526_roms): Add a region with rev of 2.
 146         (bf54x_roms): Add regions with rev of 4.
 147         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 148         bf54x_l1-0.4.h headers.
 149         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 150         New header files.
 151
 152 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 153
 154         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 155         check for SP reg.
 156
 157 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 158
 159         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 160         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 161         and count fields of the uart.
 162         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 163         and bfin_uart_get_next_byte.
 164         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 165         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 166         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 167         (bfin_uart_get_next_byte): Likewise.
 168         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 169         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 170         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 171
 172 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 173
 174         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 175         from uart->lsr before setting them.
 176
 177 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 178
 179         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 180         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 181         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 182         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 183         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 184         Likewise.
 185
 186 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 187
 188         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 189         (bfin_gpio_io_write_buffer): Store the current port state into
 190         "data", and call bfin_gpio_forward_ouput when the data or dir
 191         MMRs are updated.
 192         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 193
 194 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 195
 196         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 197         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 198         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 199         mask a or mask b MMRs are written.
 200         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 201         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 202         When handling level gpios, clear/set the bit in int_state rather
 203         than returning immediately.  Call bfin_gpio_forward_ints instead
 204         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 205
 206 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 207
 208         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 209         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 210         BYTEUNPACK.
 211         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 212         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 213
 214 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 215
 216         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 217         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 218         and BYTEUNPACK insns.
 219
 220 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 221
 222         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 223         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 224         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 225         in the trace output, and call the new bfin_sic_port_event func.
 226
 227 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 228
 229         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 230
 231 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 232
 233         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 234         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 235
 236 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 237
 238         * configure: Regenerate after common/aclocal.m4 changes.
 239
 240 2011-03-28  Robin Getz  <robin.getz@analog.com>
 241
 242         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 243         and add to casted low 16bits of A0.L and store in val0.  Cast high
 244         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 245         store in val1.  Delete bit checks of val0 and val1.
 246
 247 2011-03-26  Robin Getz  <robin.getz@analog.com>
 248
 249         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 250         the result was 0x80000000 for RND12 subtraction.
 251
 252 2011-03-26  Robin Getz  <robin.getz@analog.com>
 253
 254         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 255
 256 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 257
 258         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 259         major code flow point.
 260         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 261         before calling hw_port_event on ourselves.
 262         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 263         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 264         at the start of the function.
 265
 266 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 267
 268         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 269         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 270         Invert port->both bit check.
 271
 272 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 273
 274         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 275         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 276
 277 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 278
 279         * TODO: Document some known SIC issues.
 280
 281 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 282
 283         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 284         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 285         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 286         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 287         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 288         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 289         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 290         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 291         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 292         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 293         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 294         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 295         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 296         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 297
 298 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 299
 300         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 301
 302 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 303
 304         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 305
 306 2011-03-23  Robin Getz  <robin.getz@analog.com>
 307
 308         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 309         value for the VIT_MAX insn, and mask off the result when done.
 310
 311 2011-03-23  Robin Getz  <robin.getz@analog.com>
 312
 313         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 314         and set A0 to a0_lo when up_lo is false.
 315
 316 2011-03-23  Robin Getz  <robin.getz@analog.com>
 317
 318         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 319         saturate_s40, and use the v parameter to update the AV bit.  Set the
 320         AC bit only when the final result is 0.
 321
 322 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 323
 324         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 325         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 326         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 327         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 328         Encode ids with the ENC macro.
 329         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 330         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 331         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 332         (bfin_sic_533_port_event): Delete.
 333         (bfin_sic_finish): Call set_hw_port_event with
 334         bfin_sic_537_port_event for BF533 and BF59x targets.
 335
 336 2011-03-23  Robin Getz  <robin.getz@analog.com>
 337
 338         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 339         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 340
 341 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 342
 343         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 344         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 345         Change bfin_gpio addresses from f/g/h to 5/6/7.
 346         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 347
 348 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 349
 350         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 351         * configure: Regenerate.
 352         * config.in: Regenerate.
 353         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 354         kill or pread.
 355
 356 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 357
 358         * Makefile.in (dv-bfin_gpio.o): New target.
 359         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 360         * configure: Regenerate.
 361         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 362         * machs.c: Include dv-bfin_gpio.h.
 363         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 364         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 365         Delete GPIO memory stubs.
 366         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 367         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 368         peripheral devices.
 369         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 370
 371 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 374         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 375         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 376         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 377         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 378         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 379         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 380         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 381         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 382         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 383         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 384         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 385         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 386         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 387         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 388         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 389         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 390
 391 2011-03-15  Robin Getz  <robin.getz@analog.com>
 392
 393         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 394         and subs.
 395
 396 2011-03-15  Robin Getz  <robin.getz@analog.com>
 397
 398         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 399
 400 2011-03-15  Robin Getz  <robin.getz@analog.com>
 401
 402         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 403         high bit is set after extract_mult.
 404         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 405         functions.  Use these to update the AN bit.
 406
 407 2011-03-15  Robin Getz  <robin.getz@analog.com>
 408
 409         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 410         the extract_mult functions.  Include these when updating the V, VS,
 411         and V_COPY bits.
 412
 413 2011-03-15  Robin Getz  <robin.getz@analog.com>
 414
 415         * bfin-sim.c (astat_names): New global bit array.
 416         (decode_CC2stat_0): Delete local astat_name and astat_names.
 417         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 418         Print out ASTAT bit values when checking an ASTAT register.
 419
 420 2010-03-15  Robin Getz  <robin.getz@analog.com>
 421
 422         * bfin-sim.c (extract_mult): Handle M_IU.
 423
 424 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 425
 426         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 427         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 428         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 429         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 430         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 431         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 432         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 433         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 434         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 435         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 436         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 437         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 438         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 439         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 440         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 441         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 442         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 443         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 444         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 445         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 446         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 447         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 448         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 449         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 450         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 451         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 452         tconfig.in: New Blackfin port.