1 2011-06-18 Robin Getz <robin.getz@analog.com>
3 * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
6 2011-06-18 Robin Getz <robin.getz@analog.com>
8 * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
9 rather than get_extended_acc in LSHIFT insns.
11 2011-06-18 Robin Getz <robin.getz@analog.com>
13 * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
14 Check MM once when mmod is M_FU to match M_TFU better.
16 2011-06-18 Robin Getz <robin.getz@analog.com>
18 * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
19 32, perform a left shift. Update the corresponding AV bit. Set
20 AZ when the low 32bits are also zero.
22 2011-06-18 Robin Getz <robin.getz@analog.com>
24 * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
25 call lshift only when count is positive. Otherwise, call ashiftrt.
26 With arithmetic right shift insns, call ashiftrt when the value is
27 small enough, otherwise call lshift.
29 2011-06-18 Robin Getz <robin.getz@analog.com>
31 * bfin-sim.c (extract_mult): Call saturate_s16 directly when
32 mmod is M_IH rather than computing the result by hand.
34 2011-06-18 Robin Getz <robin.getz@analog.com>
36 * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
37 before saturation, set sat when more cases saturate, and set the
38 overflow bit based on these results. For M_TFU, M_IU, M_FU, and
39 M_W32, change the max values compared against.
40 (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
41 when processing MAC1 and pass v_0 when processing MAC0. Combine
42 the results into the V/VS ASTAT bits.
44 2011-06-18 Robin Getz <robin.getz@analog.com>
46 * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
47 and mmod is M_IU. Call saturate_s16 when MM is set and mmod
50 2011-06-18 Robin Getz <robin.getz@analog.com>
52 * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
53 allow MM to sign extend all the time.
54 (decode_macfunc): Likewise. Drop sign extension of unsigned
57 2011-06-18 Robin Getz <robin.getz@analog.com>
59 * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
60 (decode_macfunc): Likewise when mmod is M_IH.
62 2011-06-18 Mike Frysinger <vapier@gentoo.org>
64 * interp.c (sim_create_inferior): Change free to freeargv.
66 2011-06-04 Mike Frysinger <vapier@gentoo.org>
68 * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
69 (bf537_port): Define applicable devices with PORT to the glue-or
70 devices instead of SIC.
71 (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
72 Only parse reg/type when the device has an address. Move the call
73 to dv_bfin_hw_port_parse up before slash check.
75 2011-06-04 Mike Frysinger <vapier@gentoo.org>
77 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
78 BFIN_SIC_TO_CEC_PORTS definition.
79 (SIC_PORTS): New define.
80 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
81 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
82 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
84 (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
85 bfin_sic_561_ports): Define new layouts with SIC_PORTS().
86 (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
87 bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
88 to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
89 bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
90 Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
91 * machs.c (bfin_port_layout): New structure.
92 (bfin_model_data): Add new "port" and "port_count" members.
93 (PORT, SIC): New defines.
94 (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
95 bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
96 Move and redefine port layout from dv-bfin_sic.c to here.
97 (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
98 bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
99 bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
100 bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
101 bf548_port, bf549_port): New defines.
102 (bfin_model_data): Link in new bfin_port_layout.port member.
103 (dv_bfin_hw_port_parse): New function.
104 (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
105 (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
106 bfin_sic links with new dv_bfin_hw_port_parse function.
108 2011-06-03 Mike Frysinger <vapier@gentoo.org>
110 * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
112 2011-05-25 Mike Frysinger <vapier@gentoo.org>
114 * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
116 2011-05-25 Mike Frysinger <vapier@gentoo.org>
118 * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
119 * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
120 * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
121 * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
122 * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
123 * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
124 * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
125 * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
126 * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
127 * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
128 * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
129 * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
130 * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
131 * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
132 * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
133 * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
134 * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
135 * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
136 * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
137 * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
138 * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
139 * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
140 * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
141 * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
142 * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
143 * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
144 * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
145 * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
147 * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
149 2011-05-25 Mike Frysinger <vapier@gentoo.org>
151 * Makefile.in (dv-bfin_pfmon.o): New target.
152 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
153 * configure: Regenerated.
154 * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
155 * machs.c: Add include new bfin_pfmon.h.
156 (bfin_core_dev): Add pfmon.
158 2011-05-25 Mike Frysinger <vapier@gentoo.org>
160 * machs.c (bf526_roms): Add a region with rev of 2.
161 (bf54x_roms): Add regions with rev of 4.
162 * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
163 bf54x_l1-0.4.h headers.
164 * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
167 2011-05-14 Mike Frysinger <vapier@gentoo.org>
169 * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
172 2011-05-14 Mike Frysinger <vapier@gentoo.org>
174 * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
175 local uart. When LOOP_ENA is set in mcr, write to the saved byte
176 and count fields of the uart.
177 (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
178 and bfin_uart_get_next_byte.
179 (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
180 check first, and skip the remaining code when LOOP_ENA is set in mcr.
181 * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
182 (bfin_uart_get_next_byte): Likewise.
183 (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
184 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
185 calling bfin_uart_write_byte and bfin_uart_get_next_byte.
187 2011-05-09 Mike Frysinger <vapier@gentoo.org>
189 * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
190 from uart->lsr before setting them.
192 2011-04-27 Mike Frysinger <vapier@gentoo.org>
194 * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
195 (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
196 bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
197 bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
198 bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
201 2011-04-26 Mike Frysinger <vapier@gentoo.org>
203 * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
204 (bfin_gpio_io_write_buffer): Store the current port state into
205 "data", and call bfin_gpio_forward_ouput when the data or dir
207 (bfin_gpio_ports): Change p0..p15 to bidirect_port.
209 2011-04-26 Mike Frysinger <vapier@gentoo.org>
211 * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
212 (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
213 (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
214 mask a or mask b MMRs are written.
215 (bfin_gpio_port_event): When handling edge gpios, set the bit in
216 int_state, call bfin_gpio_forward_ints, and then clear the bit.
217 When handling level gpios, clear/set the bit in int_state rather
218 than returning immediately. Call bfin_gpio_forward_ints instead
219 of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
221 2011-04-16 Mike Frysinger <vapier@gentoo.org>
223 * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
224 BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
226 (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
227 BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
229 2011-04-14 Mike Frysinger <vapier@gentoo.org>
231 * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
232 BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
233 and BYTEUNPACK insns.
235 2011-04-11 Mike Frysinger <vapier@gentoo.org>
237 * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
238 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
239 bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
240 in the trace output, and call the new bfin_sic_port_event func.
242 2011-04-11 Mike Frysinger <vapier@gentoo.org>
244 * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
246 2011-04-01 Mike Frysinger <vapier@gentoo.org>
248 * dv-bfin_otp.c (bfin_otp_ports): Declare.
249 (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
251 2011-03-29 Mike Frysinger <vapier@gentoo.org>
253 * configure: Regenerate after common/aclocal.m4 changes.
255 2011-03-28 Robin Getz <robin.getz@analog.com>
257 * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
258 and add to casted low 16bits of A0.L and store in val0. Cast high
259 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
260 store in val1. Delete bit checks of val0 and val1.
262 2011-03-26 Robin Getz <robin.getz@analog.com>
264 * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
265 the result was 0x80000000 for RND12 subtraction.
267 2011-03-26 Robin Getz <robin.getz@analog.com>
269 * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
271 2011-03-24 Mike Frysinger <vapier@gentoo.org>
273 * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
274 major code flow point.
275 * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
276 before calling hw_port_event on ourselves.
277 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
278 bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
279 at the start of the function.
281 2011-03-24 Mike Frysinger <vapier@gentoo.org>
283 * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
284 Normalize "level" to 0/1 values. Shift "level" over by "my_port".
285 Invert port->both bit check.
287 2011-03-24 Mike Frysinger <vapier@gentoo.org>
289 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
290 valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
292 2011-03-23 Mike Frysinger <vapier@gentoo.org>
294 * TODO: Document some known SIC issues.
296 2011-03-23 Mike Frysinger <vapier@gentoo.org>
298 * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
299 * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
300 * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
301 for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
302 * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
303 * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
304 * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
305 * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
306 * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
307 * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
308 * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
309 * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
310 * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
311 * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
313 2011-03-23 Mike Frysinger <vapier@gentoo.org>
315 * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
317 2011-03-23 Mike Frysinger <vapier@gentoo.org>
319 * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
321 2011-03-23 Robin Getz <robin.getz@analog.com>
323 * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
324 value for the VIT_MAX insn, and mask off the result when done.
326 2011-03-23 Robin Getz <robin.getz@analog.com>
328 * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
329 and set A0 to a0_lo when up_lo is false.
331 2011-03-23 Robin Getz <robin.getz@analog.com>
333 * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
334 saturate_s40, and use the v parameter to update the AV bit. Set the
335 AC bit only when the final result is 0.
337 2011-03-23 Mike Frysinger <vapier@gentoo.org>
339 * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
340 (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
341 bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
342 bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
343 Encode ids with the ENC macro.
344 (bfin_sic_52x_port_event, bfin_sic_537_port_event,
345 bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
346 from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
347 (bfin_sic_533_port_event): Delete.
348 (bfin_sic_finish): Call set_hw_port_event with
349 bfin_sic_537_port_event for BF533 and BF59x targets.
351 2011-03-23 Robin Getz <robin.getz@analog.com>
353 * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
354 BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
356 2011-03-23 Mike Frysinger <vapier@gentoo.org>
358 * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
359 bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
360 Change bfin_gpio addresses from f/g/h to 5/6/7.
361 (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
363 2011-03-17 Mike Frysinger <vapier@gentoo.org>
365 * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
366 * configure: Regenerate.
367 * config.in: Regenerate.
368 * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
371 2011-03-15 Mike Frysinger <vapier@gentoo.org>
373 * Makefile.in (dv-bfin_gpio.o): New target.
374 * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
375 * configure: Regenerate.
376 * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
377 * machs.c: Include dv-bfin_gpio.h.
378 (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
379 bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
380 Delete GPIO memory stubs.
381 (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
382 bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
384 (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
386 2011-03-15 Mike Frysinger <vapier@gentoo.org>
388 * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
389 bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
390 bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
391 bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
392 bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
393 bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
394 bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
395 bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
396 bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
397 dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
398 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
399 dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
400 dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
401 dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
402 dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
403 dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
404 linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
406 2011-03-15 Robin Getz <robin.getz@analog.com>
408 * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
411 2011-03-15 Robin Getz <robin.getz@analog.com>
413 * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
415 2011-03-15 Robin Getz <robin.getz@analog.com>
417 * bfin-sim.c (decode_macfunc): New neg parameter. Set when the
418 high bit is set after extract_mult.
419 (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
420 functions. Use these to update the AN bit.
422 2011-03-15 Robin Getz <robin.getz@analog.com>
424 * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
425 the extract_mult functions. Include these when updating the V, VS,
428 2011-03-15 Robin Getz <robin.getz@analog.com>
430 * bfin-sim.c (astat_names): New global bit array.
431 (decode_CC2stat_0): Delete local astat_name and astat_names.
432 (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
433 Print out ASTAT bit values when checking an ASTAT register.
435 2010-03-15 Robin Getz <robin.getz@analog.com>
437 * bfin-sim.c (extract_mult): Handle M_IU.
439 2011-03-05 Mike Frysinger <vapier@gentoo.org>
441 * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
442 bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
443 bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
444 bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
445 bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
446 bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
447 bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
448 bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
449 bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
450 bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
451 configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
452 dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
453 dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
454 dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
455 dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
456 dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
457 dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
458 dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
459 dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
460 dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
461 dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
462 dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
463 dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
464 dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
465 gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
466 linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
467 tconfig.in: New Blackfin port.