sim/bfin/ChangeLog-2021

   1 2021-06-30  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure.ac: Removed.
   4         * aclocal.m4: Removed.
   5         * configure: Removed.
   6
   7 2021-06-30  Mike Frysinger  <vapier@gentoo.org>
   8
   9         * configure.ac: Delete SIM_AC_OPTION_DEFAULT_MODEL call.
  10         * interp.c (sim_open): Set STATE_MODEL_NAME.
  11         * aclocal.m4: Regenerate.
  12         * configure: Regenerate.
  13
  14 2021-06-30  Mike Frysinger  <vapier@gentoo.org>
  15
  16         * interp.c (sim_open): Set STATE_MACHS.
  17         * machs.c (sim_machs): Rename to ...
  18         (bfin_sim_machs): ... this.
  19         * machs.h (bfin_sim_machs): New decl.
  20
  21 2021-06-29  Mike Frysinger  <vapier@gentoo.org>
  22
  23         * machs.c (sim_machs): Mark const.
  24
  25 2021-06-27  Mike Frysinger  <vapier@gentoo.org>
  26
  27         * Makefile.in: Change to $(SDL_CFLAGS) & $(SDL_LIBS).
  28         * configure.ac: Delete PKG_PROG_PKG_CONFIG &
  29         PKG_CHECK_MODULES calls.
  30         * aclocal.m4, configure: Regenerate.
  31
  32 2021-06-24  Mike Frysinger  <vapier@gentoo.org>
  33
  34         * interp.c (bfin_syscall): Set sc.arg5 & sc.arg6.
  35
  36 2021-06-22  Mike Frysinger  <vapier@gentoo.org>
  37
  38         * configure: Regenerate.
  39
  40 2021-06-21  Mike Frysinger  <vapier@gentoo.org>
  41
  42         * aclocal.m4: Regenerate.
  43         * configure: Regenerate.
  44
  45 2021-06-21  Mike Frysinger  <vapier@gentoo.org>
  46
  47         * Makefile.in (SIM_EXTRA_HW_DEVICES): Define.
  48         * configure.ac (SIM_AC_OPTION_HARDWARE): Delete call.
  49         * configure: Regenerate.
  50
  51 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * configure.ac (SIM_AC_COMMON): Delete.
  54         * aclocal.m4, configure: Regenerate.
  55
  56 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
  57
  58         * Makefile.in: Change @MAINTAINER_MODE_TRUE@ to $(MAINT).
  59         * aclocal.m4, configure: Regenerate.
  60
  61 2021-06-20  Mike Frysinger  <vapier@gentoo.org>
  62
  63         * aclocal.m4: Regenerate.
  64         * configure: Regenerate.
  65
  66 2021-06-19  Mike Frysinger  <vapier@gentoo.org>
  67
  68         * aclocal.m4: Regenerate.
  69         * configure: Regenerate.
  70
  71 2021-06-19  Mike Frysinger  <vapier@gentoo.org>
  72
  73         * configure: Regenerate.
  74
  75 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  76
  77         * aclocal.m4, configure: Regenerate.
  78
  79 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  80
  81         * configure: Regenerate.
  82
  83 2021-06-18  Mike Frysinger  <vapier@gentoo.org>
  84
  85         * dv-bfin_cec.c: Include sim-signal.h.
  86         * sim-main.h: Delete sim-signal.h include.
  87
  88 2021-06-17  Mike Frysinger  <vapier@gentoo.org>
  89
  90         * configure.ac: Delete SIM_AC_OPTION_ENDIAN call.
  91         * interp.c (sim_open): Set current_target_byte_order.
  92         * aclocal.m4, configure: Regenerate.
  93
  94 2021-06-16  Mike Frysinger  <vapier@gentoo.org>
  95
  96         * configure: Regenerate.
  97
  98 2021-06-16  Mike Frysinger  <vapier@gentoo.org>
  99
 100         * configure: Regenerate.
 101         * config.in: Removed.
 102
 103 2021-06-15  Mike Frysinger  <vapier@gentoo.org>
 104
 105         * config.in, configure: Regenerate.
 106
 107 2021-06-14  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
 110         * configure: Regenerate.
 111
 112 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * interp.c: Include portability.h.
 115         (getuid, getgid, geteuid, getegid setuid, setgid): Delete.
 116
 117 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 118
 119         * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
 120         * interp.c (sim_open): Set current_alignment.
 121
 122 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * aclocal.m4, config.in, configure: Regenerate.
 125
 126 2021-06-12  Mike Frysinger  <vapier@gentoo.org>
 127
 128         * configure.ac: Delete calls to AC_CHECK_FUNCS_ONCE and
 129         AC_CHECK_HEADERS_ONCE.
 130         * config.in, configure: Regenerate.
 131
 132 2021-05-28  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * dv-bfin_otp.c (bfin_otp_write_page): Shift data1 & data3 by 32-bits.
 135
 136 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
 137
 138         * dv-bfin_otp.c (bfin_otp_write_page): Fix args to
 139         bfin_otp_write_page_val2.
 140
 141 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * dv-bfin_otp.c (bfin_otp_write_page): Call bfin_otp_write_page_val2.
 144
 145 2021-05-23  Mike Frysinger  <vapier@gentoo.org>
 146
 147         * dv-bfin_cec.c: Include strings.h.
 148
 149 2021-05-17  Mike Frysinger  <vapier@gentoo.org>
 150
 151         * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete.
 152
 153 2021-05-17  Mike Frysinger  <vapier@gentoo.org>
 154
 155         * interp.c (sim_open): Call sim_state_alloc_extra.
 156         * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define.
 157         (struct sim_state): Delete.
 158         (STATE_BOARD_DATA): Define.
 159
 160 2021-05-16  Mike Frysinger  <vapier@gentoo.org>
 161
 162         * bfin-sim.c, devices.c, dv-bfin_cec.c, dv-bfin_ctimer.c,
 163         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 164         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 165         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gpio.c, dv-bfin_gpio2.c,
 166         dv-bfin_gptimer.c, dv-bfin_jtag.c, dv-bfin_mmu.c, dv-bfin_nfc.c,
 167         dv-bfin_otp.c, dv-bfin_pfmon.c, dv-bfin_pint.c, dv-bfin_pll.c,
 168         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 169         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 170         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, interp.c,
 171         machs.c: Replace config.h include with defs.h.
 172
 173 2021-05-16  Mike Frysinger  <vapier@gentoo.org>
 174
 175         * config.in, configure: Regenerate.
 176
 177 2021-05-14  Mike Frysinger  <vapier@gentoo.org>
 178
 179         * interp.c: Update include path.
 180
 181 2021-05-04  Mike Frysinger  <vapier@gentoo.org>
 182
 183         * configure: Regenerate.
 184
 185 2021-05-03  Simon Marchi  <simon.marchi@polymtl.ca>
 186
 187         * interp.c (sim_open): Adjust format string specifier.
 188
 189 2021-05-02  Mike Frysinger  <vapier@gentoo.org>
 190
 191         * bfin-sim.c: Include ansidecl.h.
 192         (illegal_instruction): Change __attribute__((noreturn)) to
 193         ATTRIBUTE_NORETURN.
 194         (illegal_instruction_combination, illegal_instruction_or_combination,
 195         unhandled_instruction): Likewise.
 196
 197 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
 198
 199         * dv-bfin_mmu.c (bfin_mmu_options): Mark static.
 200         (sim_install_bfin_mmu): New function & prototype.
 201         * interp.c (e_sim_add_option_table): Delete.
 202         * machs.c (bfin_mach_options): Mark static.
 203         (sim_install_bfin_mach): New function & prototype.
 204
 205 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
 206
 207         * config.in, configure: Regenerate.
 208
 209 2021-04-26  Mike Frysinger  <vapier@gentoo.org>
 210
 211         * Makefile.in (NL_TARGET): Delete.
 212
 213 2021-04-23  Mike Frysinger  <vapier@gentoo.org>
 214
 215         * configure.ac (SIM_AC_OPTION_HARDWARE): Delete first two args.
 216         * configure: Regenerate.
 217
 218 2021-04-22  Tom Tromey  <tom@tromey.com>
 219
 220         * configure, config.in: Rebuild.
 221
 222 2021-04-22  Tom Tromey  <tom@tromey.com>
 223
 224         * Makefile.in (INCLUDE): Remove.
 225
 226 2021-04-22  Tom Tromey  <tom@tromey.com>
 227
 228         * configure: Rebuild.
 229
 230 2021-04-21  Mike Frysinger  <vapier@gentoo.org>
 231
 232         * aclocal.m4: Regenerate.
 233
 234 2021-04-21  Simon Marchi  <simon.marchi@polymtl.ca>
 235
 236         * configure: Regenerate.
 237
 238 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * configure.ac: Change AC_CHECK_HEADERS to AC_CHECK_HEADERS_ONCE.
 241         * configure: Regenerate.
 242
 243 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 244
 245         * configure.ac: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE and
 246         delete mmap & munmap.
 247         * configure: Regenerate.
 248
 249 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
 250
 251         * interp.c (bfin_syscall): Delete CB_SYS_getpid handling.
 252
 253 2021-04-12  Mike Frysinger  <vapier@gentoo.org>
 254
 255         * interp.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all.
 256
 257 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
 258
 259         * aclocal.m4, configure: Regenerate.
 260
 261 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 262
 263         * configure: Regenerate.
 264
 265 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
 266
 267         * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
 268         * aclocal.m4, configure: Regenerate.
 269
 270 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
 271
 272         * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
 273         * aclocal.m4, configure: Regenerate.
 274
 275 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 276
 277         * interp.c (sim_open): Delete call to STATE_WATCHPOINTS.
 278
 279 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 280
 281         * configure: Regenerate.
 282
 283 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
 284
 285         * interp.c (sim_open): Delete STATE_WATCHPOINTS (sd)->sizeof_pc.
 286
 287 2021-01-11  Mike Frysinger  <vapier@gentoo.org>
 288
 289         * config.in, configure: Regenerate.
 290
 291 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
 292
 293         * configure: Regenerate.
 294
 295 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
 296
 297         * configure: Regenerate.
 298
 299 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
 300
 301         * machs.c: Include stdlib.h.
 302
 303 2021-01-04  Mike Frysinger  <vapier@gentoo.org>
 304
 305         * dv-bfin_dma.c: Include stdlib.h.
 306
 307 2021-01-02  Mike Frysinger  <vapier@gentoo.org>
 308
 309         * interp.c: Change ALIGN to align_up.
 310         * sim-main.h (ALIGN): Delete
 311
 312 2020-08-21  Simon Marchi  <simon.marchi@polymtl.ca>
 313
 314         * configure.ac: Include config/pkg.m4.
 315
 316 2020-07-29  Simon Marchi  <simon.marchi@efficios.com>
 317
 318         * aclocal.m4, configure: Re-generate.
 319
 320 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 321
 322         * configure: Regenerate.
 323
 324 2016-08-13  Mike Frysinger  <vapier@gentoo.org>
 325
 326         PR sim/20438
 327         * machs.h (MODEL_TYPE, MACH_ATTR, BFIN_INSN_*): Move ...
 328         * arch.h: ... to this new header file.
 329         * sim-main.h (SIM_CPU): Delete.
 330         Include arch.h before sim-base.h, and move sim-base.h before
 331         bfin-sim.h.
 332
 333 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 334
 335         * config.in, configure: Regenerate.
 336
 337 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 338
 339         * configure: Regenerate.
 340
 341 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 342
 343         * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
 344         * configure: Regenerate.
 345
 346 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 347
 348         * configure: Regenerate.
 349
 350 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 351
 352         * configure: Regenerate.
 353
 354 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 355
 356         * configure.ac (SIM_AC_OPTION_INLINE): Delete call.
 357         * configure: Regenerate.
 358
 359 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 360
 361         * configure: Regenerate.
 362
 363 2016-01-10  Mike Frysinger  <vapier@gentoo.org>
 364
 365         * configure: Regenerate.
 366
 367 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 368
 369         * config.in, configure: Regenerate.
 370
 371 2016-01-06  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * interp.c (bfin_syscall): Remove first const from argv.
 374         (sim_open): Mark argv const.
 375         (simple_env): Remove first const.
 376         (bfin_user_init): Remove first const from argv and and env
 377         (bfin_os_init): Remove first const from argv.
 378         (sim_create_inferior): Mark argv and env const.
 379         Drop casts from bfin_user_init and bfin_os_init calls.
 380
 381 2016-01-05  Mike Frysinger  <vapier@gentoo.org>
 382
 383         * interp.c (step_once): Call TRACE_DISASM.
 384
 385 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 386
 387         * bfin-sim.c (decode_dsp32shift_0): Change MIN to min.
 388         * dv-bfin_dma.c (bfin_dma_hw_event_callback): Likewise.
 389         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_write_amgctl): Likewise.
 390         * dv-bfin_emac.c (bfin_emac_dma_read_buffer): Change MAX to max.
 391         * dv-bfin_mmu.c (_mmu_check_addr): Change MIN to min.
 392         * dv-bfin_trace.c (bfin_trace_io_read_buffer): Likewise.
 393         * interp.c (bfin_fdpic_load): Change MAX to max.
 394         (bfin_fdpic_load): Likewise.
 395         * sim-main.h (MIN, MAX): Delete.
 396         (CLAMP): Change MIN to min and MAX to max.
 397
 398 2016-01-04  Mike Frysinger  <vapier@gentoo.org>
 399
 400         * configure: Regenerate.
 401
 402 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 403
 404         * interp.c (sim_open): Update sim_parse_args comment.
 405
 406 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 407
 408         * TODO: Delete file.
 409
 410 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 411
 412         * interp.c (count_argc): Delete.
 413         (bfin_syscall): Change count_argc to countargv.
 414         (bfin_user_init): Likewise.
 415
 416 2016-01-03  Mike Frysinger  <vapier@gentoo.org>
 417
 418         * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
 419         * configure: Regenerate.
 420
 421 2016-01-02  Mike Frysinger  <vapier@gentoo.org>
 422
 423         * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
 424         LITTLE.
 425         * configure: Regenerate.
 426
 427 2015-12-27  Mike Frysinger  <vapier@gentoo.org>
 428
 429         * Makefile.in (SIM_OBJS): Delete sim-hload.o.
 430
 431 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 432
 433         * config.in, configure: Regenerate.
 434
 435 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 436
 437         * devices.c (bfin_mmr_invalid): Delete cpu arg and add missing arg.
 438         Add cpu, rw, and reason local vars.  Rewrite error messages.  Add
 439         more todo comments.
 440         (dv_bfin_mmr_invalid): Update bfin_mmr_invalid call.
 441         (dv_bfin_mmr_require): Likewise.  Change return to bool.  Check
 442         alignment of the addr variable.
 443         (bfin_mmr_check, dv_bfin_mmr_check, device_io_read_buffer,
 444         device_io_write_buffer): Delete.
 445         (dv_bfin_mmr_require_16_32): Define.
 446         * devices.h (dv_bfin_mmr_require): Change return to bool.
 447         (dv_bfin_mmr_check): Delete.
 448         (dv_bfin_mmr_require_16_32): Define.
 449         Add a few comments.
 450         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Call
 451         dv_bfin_mmr_require_32.
 452         (bfin_cec_io_read_buffer): Likewise.
 453         * dv-bfin_ctimer.c (bfin_ctimer_io_write_buffer): Likewise.
 454         (bfin_ctimer_io_read_buffer): Likewise.
 455         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Call
 456         dv_bfin_mmr_require_16_32.  Return 0 in the default case.
 457         (bfin_dma_io_read_buffer): Call dv_bfin_mmr_require_16_32.
 458         * dv-bfin_ebiu_amc.c (bf50x_ebiu_amc_io_write_buffer): Return 0
 459         when dv_bfin_mmr_require_16 fails and in the default case.
 460         (bf53x_ebiu_amc_io_write_buffer): Likewise.
 461         (bf54x_ebiu_amc_io_write_buffer): Likewise.
 462         (bfin_ebiu_amc_io_write_buffer): Call dv_bfin_mmr_require_16_32.
 463         (bf50x_ebiu_amc_io_read_buffer): Return 0 when
 464         dv_bfin_mmr_require_16 fails and in the default case.
 465         (bf53x_ebiu_amc_io_read_buffer): Likewise.
 466         (bf54x_ebiu_amc_io_read_buffer): Likewise.
 467         (bfin_ebiu_amc_io_read_buffer): Call dv_bfin_mmr_require_16_32.
 468         * dv-bfin_ebiu_ddrc.c (bfin_ebiu_ddrc_io_write_buffer): Call
 469         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16 or
 470         dv_bfin_mmr_require_32 fails.
 471         (bfin_ebiu_ddrc_io_read_buffer): Likewise.
 472         * dv-bfin_ebiu_sdc.c (bfin_ebiu_sdc_io_write_buffer): Likewise.
 473         (bfin_ebiu_sdc_io_read_buffer): Likewise.
 474         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Return 0 when
 475         dv_bfin_mmr_require_32 fails and in the default case.
 476         (bfin_emac_io_read_buffer): Likewise.
 477         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Call
 478         dv_bfin_mmr_require_16_32 and return 0 when dv_bfin_mmr_require_16
 479         or dv_bfin_mmr_require_32 fails and in the default case.
 480         (bfin_eppi_io_read_buffer): Likewise.
 481         * dv-bfin_evt.c (bfin_evt_io_write_buffer): Call
 482         dv_bfin_mmr_require_32.
 483         (bfin_evt_io_read_buffer): Likewise.
 484         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Move call to
 485         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 486         fails and in the default case.
 487         (bfin_gpio_io_read_buffer): Likewise.
 488         * dv-bfin_gpio2.c (bfin_gpio_io_write_buffer): Move call to
 489         dv_bfin_mmr_require_16 and dv_bfin_mmr_require_32 to earlier in the
 490         func.  Return 0 when it fails and in the default case.
 491         (bfin_gpio_io_read_buffer): Likewise.
 492         * dv-bfin_gptimer.c (bfin_gptimer_io_write_buffer): Call
 493         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16 or
 494         dv_bfin_mmr_require_32 fails and in the default case.
 495         (bfin_gptimer_io_read_buffer): Likewise.
 496         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Call
 497         dv_bfin_mmr_require_32.  Return 0 in the default case.
 498         (bfin_jtag_io_read_buffer): Likewise.  Delete while(1) loop.
 499         * dv-bfin_mmu.c (bfin_mmu_io_write_buffer): Call
 500         dv_bfin_mmr_require_32.  Return 0 in the default case.
 501         (bfin_mmu_io_read_buffer): Likewise.  Delete while(1) loop.
 502         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Move call to
 503         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 504         fails and in the default case.
 505         (bfin_nfc_io_read_buffer): Likewise.
 506         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Call
 507         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16
 508         or dv_bfin_mmr_require_32 fails and in the default case.
 509         (bfin_otp_io_read_buffer): Likewise.
 510         * dv-bfin_pfmon.c (bfin_pfmon_io_write_buffer): Call
 511         dv_bfin_mmr_require_32.  Return 0 in the default case.
 512         (bfin_pfmon_io_read_buffer): Likewise.  Delete while(1) loop.
 513         * dv-bfin_pint.c (bfin_pint_io_write_buffer): Move call to
 514         dv_bfin_mmr_require_32 to earlier in the func.  Return 0 when it
 515         fails and in the default case.
 516         (bfin_pint_io_read_buffer): Likewise.
 517         * dv-bfin_pll.c (bfin_pll_io_write_buffer): Call
 518         dv_bfin_mmr_require_16_32.  Return 0 when dv_bfin_mmr_require_16
 519         fails.
 520         (bfin_pll_io_read_buffer): Likewise.
 521         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Move call to
 522         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 523         fails and in the default case.
 524         9bfin_ppi_io_read_buffer): Likewise.
 525         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Call
 526         dv_bfin_mmr_require_16_32.
 527         (bfin_rtc_io_read_buffer): Likewise.
 528         * dv-bfin_sic.c (bfin_sic_52x_io_write_buffer): Likewise.
 529         (bfin_sic_52x_io_read_buffer, bfin_sic_537_io_write_buffer,
 530         bfin_sic_537_io_read_buffer, bfin_sic_54x_io_write_buffer,
 531         bfin_sic_54x_io_read_buffer, bfin_sic_561_io_write_buffer,
 532         bfin_sic_561_io_read_buffer): Likewise.
 533         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Move call to
 534         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 535         fails and in the default case.
 536         (bfin_spi_io_read_buffer): Likewise.
 537         * dv-bfin_trace.c (bfin_trace_io_write_buffer): Call
 538         dv_bfin_mmr_require_32.  Return 0 in the default case.
 539         (bfin_trace_io_read_buffer): Likewise.  Delete while(1) loop.
 540         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Move call to
 541         dv_bfin_mmr_require_16 to earlier in the func.  Return 0 when it
 542         fails and in the default case.
 543         (bfin_twi_io_read_buffer): Likewise.
 544         * dv-bfin_uart.c (bfin_uart_io_write_buffer): Likewise.
 545         (bfin_uart_io_read_buffer): Likewise.
 546         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Likewise.
 547         (bfin_uart_io_read_buffer): Likewise.
 548         * dv-bfin_wdog.c (bfin_wdog_io_write_buffer): Call
 549         dv_bfin_mmr_require_16_32.
 550         (bfin_wdog_io_read_buffer): Likewise.  Return 0 when
 551         dv_bfin_mmr_require_16 fails.
 552         * dv-bfin_wp.c (bfin_wp_io_write_buffer): Call
 553         dv_bfin_mmr_require_32.  Return 0 in the default case.
 554         (bfin_wp_io_read_buffer): Likewise.  Delete while(1) loop.
 555         * tconfig.h: Delete file.
 556
 557 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 558
 559         * bfin-sim.c (decode_LDST_0): Add 4th element to posts array.
 560
 561 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 562
 563         * interp.c (sim_create_inferior): Update comment and argv check.
 564
 565 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 566
 567         * Makefile.in (SIM_OBJS): Delete sim-model.o.
 568         * tconfig.h (SIM_HAVE_MODEL): Delete.
 569
 570 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 571
 572         * machs.c: Rename MACH to SIM_MACH, MACH_IMP_PROPERTIES to
 573         SIM_MACH_IMP_PROPERTIES, and MODEL to SIM_MODEL.
 574
 575 2015-12-25  Mike Frysinger  <vapier@gentoo.org>
 576
 577         * devices.c (device_error): Delete.
 578
 579 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
 580
 581         * tconfig.h (SIM_HANDLES_LMA): Delete.
 582
 583 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
 584
 585         * tconfig.h (WITH_MODULO_MEMORY): Delete.
 586
 587 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
 588
 589         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
 590         sim-stop.o.
 591
 592 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
 593
 594         * interp.c (sim_close): Delete.
 595
 596 2015-10-11  Mike Frysinger  <vapier@gentoo.org>
 597
 598         PR sim/18407
 599         * bfin-sim.c (decode_dsp32shiftimm_0): Call ashiftrt when count
 600         is less than 0.
 601
 602 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
 603
 604         * interp.c (trace_register): Delete.
 605         * sim-main.h (trace_register, TRACE_REGISTER, TRACE_REG): Delete.
 606
 607 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 608
 609         * configure: Regenerate.
 610
 611 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 612
 613         * interp.c: Include sim-syscall.h.
 614         (syscall_read_mem, syscall_write_mem): Delete.
 615         (bfin_syscall): Change syscall_read_mem/syscall_write_mem to
 616         sim_syscall_read_mem/sim_syscall_write_mem.
 617
 618 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
 619
 620         * linux-targ-map.h: Update example comments.
 621         (cb_linux_syscall_map): Fill out name field.
 622         (cb_linux_errno_map, cb_linux_open_map, cb_linux_signal_map):
 623         Likewise.
 624
 625 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 626
 627         * interp.c: Expand comment on CB_SYS_xxx defines.
 628
 629 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 630
 631         * configure: Regenerate.
 632
 633 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 634
 635         * configure: Regenerate.
 636
 637 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 638
 639         * bfin-sim.c (hwloop_get_next_pc): Change TRACE_BRANCH to
 640         BFIN_TRACE_BRANCH.
 641         (decode_ProgCtrl_0, decode_BRCC_0, decode_UJUMP_0, decode_CALLa_0):
 642         Likewise.
 643         * bfin-sim.h (__PUT_MEM, __GET_MEM): Change TRACE_CORE to
 644         BFIN_TRACE_CORE.
 645         * dv-bfin_cec.c (_cec_raise, cec_latch, cec_return): Change
 646         TRACE_BRANCH to BFIN_TRACE_BRANCH.
 647         * interp.c (syscall_read_mem, syscall_write_mem): Change MAYBE_TRACE
 648         to TRACE_CORE.
 649         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
 650         TRACE_SYSCALL, TRACE_EVENTS): Delete.
 651         (TRACE_CORE): Rename to ...
 652         (BFIN_TRACE_CORE): ... this.  Change MAYBE_TRACE to TRACE_CORE.
 653         (TRACE_BRANCH): Rename to ...
 654         (BFIN_TRACE_BRANCH): ... this.  Change MAYBE_TRACE to TRACE_BRANCH.
 655
 656 2015-04-24  David Binderman  <dcb314@hotmail.com>
 657             Nick Clifton  <nickc@redhat.com>
 658
 659         PR 18273
 660         * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for
 661         s == 1.
 662
 663 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 664
 665         * sim-main.h (SIM_CPU): Add note to clean this up.
 666
 667 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
 668
 669         * sim-main.h (sim_cia): Delete.
 670
 671 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
 672
 673         * sim-main.h (CIA_GET, CIA_SET): Delete.
 674
 675 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
 676
 677         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 678         * sim-main.h (STATE_CPU): Delete.
 679
 680 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 681
 682         * configure: Regenerate.
 683
 684 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 685
 686         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 687
 688 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 689
 690         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 691
 692 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 693
 694         * config.in, configure: Regenerate.
 695
 696 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 697
 698         * configure: Regenerate.
 699
 700 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 701
 702         * configure: Regenerate.
 703
 704 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 705
 706         * configure: Regenerate.
 707         * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete.
 708         * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@.
 709
 710 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 711
 712         * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status,
 713         dv_sockser_write, dv_sockser_read): Delete.
 714
 715 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 716
 717         * sim-main.h: Delete run-sim.h include.
 718
 719 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 720
 721         * aclocal.m4, config.in, configure: Regenerate.
 722         * tconfig.in: Rename file ...
 723         * tconfig.h: ... here.
 724
 725 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 726
 727         * tconfig.in: Delete includes.
 728         [HAVE_DV_SOCKSER]: Delete.
 729
 730 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 731
 732         * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
 733
 734 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 735
 736         * Makefile.in (SIM_RUN_OBJS): Delete.
 737
 738 2015-03-10  Mike Frysinger  <vapier@gentoo.org>
 739
 740         PR sim/13160
 741         * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
 742         print sed command for BSD compatibility.
 743
 744 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 745
 746         PR sim/13160
 747         * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
 748         directly rather than use $<.  Move the file name to the end of the
 749         sed command to be POSIX compliant.
 750
 751 2014-08-19  Alan Modra  <amodra@gmail.com>
 752
 753         * configure: Regenerate.
 754
 755 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 756
 757         * configure: Regenerate.
 758         * config.in: Regenerate.
 759
 760 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 761
 762         * configure: Regenerate.
 763
 764 2013-09-23  Alan Modra  <amodra@gmail.com>
 765
 766         * configure: Regenerate.
 767
 768 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 769
 770         * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
 771         SEARCH with parallel insns.
 772
 773 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 774
 775         * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
 776         insn that uses it.
 777         (decode_dsp32shiftimm_0): Likewise.
 778         Require HLs be less than 2 for accumulator shift insns.
 779
 780 2013-06-18  Mike Frysinger  <vapier@gentoo.org>
 781
 782         * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
 783         decoding various insns.
 784
 785 2013-06-17  Mike Frysinger  <vapier@gentoo.org>
 786
 787         * TODO: Add more notes.
 788
 789 2013-06-09  Mike Frysinger  <vapier@gentoo.org>
 790
 791         * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
 792         @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
 793
 794 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 795
 796         * aclocal.m4, configure: Regenerate.
 797
 798 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 799
 800         * configure: Rebuild.
 801
 802 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 803
 804         * aclocal.m4, configure: Regenerate.
 805
 806 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 807
 808         * configure.ac: Use $SIM_DV_SOCKSER_O.
 809         * configure: Regenerated.
 810
 811 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 812
 813         * aclocal.m4: Revert the previous change changing
 814         the license from GPL v2 or later to GPL v3 or later
 815         (this file was generated).
 816
 817 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 818
 819         * linux-fixed-code.s: Revert the previous change changing
 820         the license from GPL v2 or later to GPL v3 or later.
 821
 822 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 823
 824         * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
 825         0x10000 to the alias field of BFROMA.
 826         (bf561_roms): Pass 0x1000 to alias field of BFROM.
 827         (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
 828
 829 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 830
 831         * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
 832         return -1 to return 4.
 833         (bfin_reg_store): Likewise.
 834
 835 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 836
 837         * config.in, configure: Regenerate.
 838
 839 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 840
 841         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
 842         * configure: Regenerate.
 843         * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
 844         * machs.c (bf542_dev): Add PINT register blocks.
 845         (bf544_dev, bf547_dev): Likewise.
 846         (PINT_PIQS): Define.
 847         (bf54x_port): Add pint/gpio routing.
 848         * machs.h (BFIN_MMR_PINT_SIZE): Define.
 849
 850 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 851
 852         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
 853         * configure: Regenerate.
 854         * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
 855         * machs.c (bf54x_mem): Delete GPIO mem stub.
 856         (bf542_dev): Add GPIO register blocks.
 857         (bf544_dev, bf547_dev): Likewise.
 858         * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
 859
 860 2012-04-09  Robin Getz  <robin.getz@analog.com>
 861
 862         * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
 863         and LSHIFT, and set ASTAT based on the before/after values.
 864         Rename "val" to "acc" to be consistent with other code branches.
 865
 866 2012-04-09  Robin Getz  <robin.getz@analog.com>
 867
 868         * bfin-sim.c (sgn_extend): New helper.
 869         (decode_dsp32shiftimm_0): Call lshift when newimmag is more
 870         than 16, otherwise call ashiftrt.  Set ASTAT fields as needed.
 871         For accumulator shifts, call new sgn_extend helper.
 872
 873 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 874
 875         * bfin-sim.c (illegal_instruction_or_combination): New helper.
 876         (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
 877         of illegal_instruction.
 878         (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
 879         decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
 880         decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
 881         (decode_PushPopMultiple_0): Call illegal_instruction_combination when
 882         PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
 883         (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
 884         decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
 885         (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
 886         (decode_LDSTpmod_0): Call illegal_instruction_combination when
 887         PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
 888         (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
 889         decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
 890
 891 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 892
 893         * bfin-sim.h (bfin_parallel_group): New enum.
 894         (bfin_cpu_state): Add new "group" member.
 895         (PARALLEL_GROUP): Define.
 896         * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
 897         PARALLEL_GROUP.
 898         (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
 899         decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
 900         decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
 901         decode_CALLa_0, decode_linkage_0): Likewise.
 902         (_interp_insn_bfin): Set PARALLEL_GROUP.
 903         (interp_insn_bfin): Likewise.
 904
 905 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 906
 907         * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
 908
 909 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 910
 911         * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
 912         when INSN_LEN is non-zero before 32bit decode.
 913
 914 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 915
 916         * bfin-dis.c (fmtconst): Replace decimal handling with a single
 917         sprintf call and the '*' field width.
 918
 919 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 920
 921         * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
 922
 923 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 924
 925         * interp.c (bfin_user_init): Move auxvt_size decl from top to
 926         inside of auxvt check.
 927
 928 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 929
 930         * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
 931
 932 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 933
 934         * devices.c: Include devices.h.
 935
 936 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 937
 938         * aclocal.m4, config.in, configure: Regenerate.
 939
 940 2012-03-19  Robin Getz  <robin.getz@analog.com>
 941             Mike Frysinger  <vapier@gentoo.org>
 942
 943         * bfin-sim.c (lshift): Add an overflow flag.  Delete now unused
 944         i, j, and tmp vars.  Add a new v_i var.  Split the overflow logic
 945         out from the saturate logic.  Do not set V ASTAT bits when working
 946         with accumulators.
 947         (decode_ALU2op_0): Add new argument to lshift call.
 948         (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
 949         Likewise.
 950
 951 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 952
 953         * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
 954         (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
 955         amc->bank_base.
 956         (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
 957
 958 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 959
 960         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
 961         ARRAY_SIZE rather than hardcoded constant.
 962
 963 2012-02-04  Mike Frysinger  <vapier@gentoo.org>
 964
 965         * config.in: Regenerate.
 966         * configure: Likewise.
 967         * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
 968         * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
 969         _LINUX_TYPES_H defines.
 970
 971 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 972
 973         * interp.c (bfin_syscall): Increase _tbuf storage.  Declare new local
 974         tstr buffer.  Call cb_get_string on tstr when handling CB_SYS_stat64,
 975         CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
 976         CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat.  Include
 977         tstr in the tbuf output.
 978
 979 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 980
 981         * Makefile.in: Delete all dependency rules.
 982         * aclocal.m4, configure: Regenerate.
 983
 984 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 985
 986         * configure: Regenerate after common/acinclude.m4 update.
 987
 988 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 989
 990         * configure.ac: Change include to common/acinclude.m4.
 991         * aclocal.m4, configure: Regenerate.
 992
 993 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 994
 995         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 996         call.  Replace common.m4 include with SIM_AC_COMMON.
 997         * configure: Regenerate.
 998
 999 2011-09-28  Mike Frysinger  <vapier@gentoo.org>
1000
1001         * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
1002
1003 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
1004
1005         * interp.c (sim_do_command): Delete.
1006
1007 2011-07-01  Mike Frysinger  <vapier@gentoo.org>
1008
1009         * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
1010         stat_map_32 and stat_map_64.
1011         (cb_libgloss_stat_map_32): New stat map.
1012         (stat_map_32, stat_map_64): New stat map pointers.
1013         (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
1014         stat_map_64 to cb_linux_stat_map_64.
1015         (bfin_virtual_init): New function.
1016         (sim_create_inferior): Call bfin_virtual_init for all other envs.
1017
1018 2011-06-22  Mike Frysinger  <vapier@gentoo.org>
1019
1020         * interp.c (bfin_syscall): Delete old comment.  Set dreg 1 to
1021         sc.result2 and dreg 2 to sc.errcode.
1022
1023 2011-06-18  Robin Getz  <robin.getz@analog.com>
1024
1025         * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
1026         else set it.  Set ASTAT[AVS] if val is 0.  Do this for LSHIFT and
1027         ASHIFT accumulator insns.
1028
1029 2011-06-18  Robin Getz  <robin.getz@analog.com>
1030
1031         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
1032         (lshiftrt): Likewise.
1033
1034 2011-06-18  Robin Getz  <robin.getz@analog.com>
1035
1036         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
1037         rather than get_extended_acc in LSHIFT insns.
1038
1039 2011-06-18  Robin Getz  <robin.getz@analog.com>
1040
1041         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
1042         Check MM once when mmod is M_FU to match M_TFU better.
1043
1044 2011-06-18  Robin Getz  <robin.getz@analog.com>
1045
1046         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
1047         32, perform a left shift.  Update the corresponding AV bit.  Set
1048         AZ when the low 32bits are also zero.
1049
1050 2011-06-18  Robin Getz  <robin.getz@analog.com>
1051
1052         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
1053         call lshift only when count is positive.  Otherwise, call ashiftrt.
1054         With arithmetic right shift insns, call ashiftrt when the value is
1055         small enough, otherwise call lshift.
1056
1057 2011-06-18  Robin Getz  <robin.getz@analog.com>
1058
1059         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
1060         mmod is M_IH rather than computing the result by hand.
1061
1062 2011-06-18  Robin Getz  <robin.getz@analog.com>
1063
1064         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
1065         before saturation, set sat when more cases saturate, and set the
1066         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
1067         M_W32, change the max values compared against.
1068         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
1069         when processing MAC1 and pass v_0 when processing MAC0.  Combine
1070         the results into the V/VS ASTAT bits.
1071
1072 2011-06-18  Robin Getz  <robin.getz@analog.com>
1073
1074         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
1075         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
1076         is M_TFU.
1077
1078 2011-06-18  Robin Getz  <robin.getz@analog.com>
1079
1080         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
1081         allow MM to sign extend all the time.
1082         (decode_macfunc): Likewise.  Drop sign extension of unsigned
1083         values.
1084
1085 2011-06-18  Robin Getz  <robin.getz@analog.com>
1086
1087         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
1088         (decode_macfunc): Likewise when mmod is M_IH.
1089
1090 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
1091
1092         * interp.c (sim_create_inferior): Change free to freeargv.
1093
1094 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
1095
1096         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
1097         (bf537_port): Define applicable devices with PORT to the glue-or
1098         devices instead of SIC.
1099         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
1100         Only parse reg/type when the device has an address.  Move the call
1101         to dv_bfin_hw_port_parse up before slash check.
1102
1103 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
1104
1105         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
1106         BFIN_SIC_TO_CEC_PORTS definition.
1107         (SIC_PORTS): New define.
1108         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
1109         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
1110         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
1111         Delete old layouts.
1112         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
1113         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
1114         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
1115         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
1116         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
1117         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
1118         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
1119         * machs.c (bfin_port_layout): New structure.
1120         (bfin_model_data): Add new "port" and "port_count" members.
1121         (PORT, SIC): New defines.
1122         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
1123         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
1124         Move and redefine port layout from dv-bfin_sic.c to here.
1125         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
1126         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
1127         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
1128         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
1129         bf548_port, bf549_port): New defines.
1130         (bfin_model_data): Link in new bfin_port_layout.port member.
1131         (dv_bfin_hw_port_parse): New function.
1132         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
1133         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
1134         bfin_sic links with new dv_bfin_hw_port_parse function.
1135
1136 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
1137
1138         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
1139
1140 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1141
1142         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
1143
1144 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1145
1146         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
1147         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
1148         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
1149         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
1150         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
1151         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
1152         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
1153         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
1154         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
1155         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
1156         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
1157         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
1158         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
1159         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
1160         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
1161         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
1162         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
1163         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
1164         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
1165         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
1166         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
1167         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
1168         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
1169         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
1170         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
1171         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
1172         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
1173         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
1174         * machs.h: ... here.
1175         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
1176
1177 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1178
1179         * Makefile.in (dv-bfin_pfmon.o): New target.
1180         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
1181         * configure: Regenerated.
1182         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
1183         * machs.c: Add include new bfin_pfmon.h.
1184         (bfin_core_dev): Add pfmon.
1185
1186 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
1187
1188         * machs.c (bf526_roms): Add a region with rev of 2.
1189         (bf54x_roms): Add regions with rev of 4.
1190         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
1191         bf54x_l1-0.4.h headers.
1192         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
1193         New header files.
1194
1195 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
1196
1197         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
1198         check for SP reg.
1199
1200 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
1201
1202         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
1203         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
1204         and count fields of the uart.
1205         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
1206         and bfin_uart_get_next_byte.
1207         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
1208         check first, and skip the remaining code when LOOP_ENA is set in mcr.
1209         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
1210         (bfin_uart_get_next_byte): Likewise.
1211         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
1212         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
1213         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
1214
1215 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
1216
1217         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
1218         from uart->lsr before setting them.
1219
1220 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
1221
1222         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
1223         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
1224         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
1225         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
1226         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
1227         Likewise.
1228
1229 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
1230
1231         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
1232         (bfin_gpio_io_write_buffer): Store the current port state into
1233         "data", and call bfin_gpio_forward_ouput when the data or dir
1234         MMRs are updated.
1235         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
1236
1237 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
1238
1239         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
1240         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
1241         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
1242         mask a or mask b MMRs are written.
1243         (bfin_gpio_port_event): When handling edge gpios, set the bit in
1244         int_state, call bfin_gpio_forward_ints, and then clear the bit.
1245         When handling level gpios, clear/set the bit in int_state rather
1246         than returning immediately.  Call bfin_gpio_forward_ints instead
1247         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
1248
1249 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
1250
1251         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
1252         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
1253         BYTEUNPACK.
1254         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
1255         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
1256
1257 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
1258
1259         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
1260         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
1261         and BYTEUNPACK insns.
1262
1263 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
1264
1265         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
1266         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1267         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
1268         in the trace output, and call the new bfin_sic_port_event func.
1269
1270 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
1271
1272         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
1273
1274 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
1275
1276         * dv-bfin_otp.c (bfin_otp_ports): Declare.
1277         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
1278
1279 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
1280
1281         * configure: Regenerate after common/aclocal.m4 changes.
1282
1283 2011-03-28  Robin Getz  <robin.getz@analog.com>
1284
1285         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
1286         and add to casted low 16bits of A0.L and store in val0.  Cast high
1287         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
1288         store in val1.  Delete bit checks of val0 and val1.
1289
1290 2011-03-26  Robin Getz  <robin.getz@analog.com>
1291
1292         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
1293         the result was 0x80000000 for RND12 subtraction.
1294
1295 2011-03-26  Robin Getz  <robin.getz@analog.com>
1296
1297         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
1298
1299 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1300
1301         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
1302         major code flow point.
1303         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
1304         before calling hw_port_event on ourselves.
1305         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1306         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
1307         at the start of the function.
1308
1309 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1310
1311         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
1312         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
1313         Invert port->both bit check.
1314
1315 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
1316
1317         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
1318         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
1319
1320 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1321
1322         * TODO: Document some known SIC issues.
1323
1324 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1325
1326         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
1327         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
1328         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
1329         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
1330         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
1331         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
1332         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
1333         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
1334         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
1335         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
1336         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
1337         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
1338         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
1339         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
1340
1341 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1342
1343         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
1344
1345 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1346
1347         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
1348
1349 2011-03-23  Robin Getz  <robin.getz@analog.com>
1350
1351         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
1352         value for the VIT_MAX insn, and mask off the result when done.
1353
1354 2011-03-23  Robin Getz  <robin.getz@analog.com>
1355
1356         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
1357         and set A0 to a0_lo when up_lo is false.
1358
1359 2011-03-23  Robin Getz  <robin.getz@analog.com>
1360
1361         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
1362         saturate_s40, and use the v parameter to update the AV bit.  Set the
1363         AC bit only when the final result is 0.
1364
1365 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1366
1367         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
1368         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
1369         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
1370         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
1371         Encode ids with the ENC macro.
1372         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
1373         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
1374         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
1375         (bfin_sic_533_port_event): Delete.
1376         (bfin_sic_finish): Call set_hw_port_event with
1377         bfin_sic_537_port_event for BF533 and BF59x targets.
1378
1379 2011-03-23  Robin Getz  <robin.getz@analog.com>
1380
1381         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
1382         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
1383
1384 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
1385
1386         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
1387         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
1388         Change bfin_gpio addresses from f/g/h to 5/6/7.
1389         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
1390
1391 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
1392
1393         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
1394         * configure: Regenerate.
1395         * config.in: Regenerate.
1396         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
1397         kill or pread.
1398
1399 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
1400
1401         * Makefile.in (dv-bfin_gpio.o): New target.
1402         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
1403         * configure: Regenerate.
1404         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
1405         * machs.c: Include dv-bfin_gpio.h.
1406         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
1407         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
1408         Delete GPIO memory stubs.
1409         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
1410         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
1411         peripheral devices.
1412         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
1413
1414 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
1415
1416         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
1417         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
1418         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
1419         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
1420         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
1421         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
1422         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
1423         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
1424         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
1425         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
1426         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
1427         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
1428         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
1429         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
1430         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
1431         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
1432         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
1433
1434 2011-03-15  Robin Getz  <robin.getz@analog.com>
1435
1436         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
1437         and subs.
1438
1439 2011-03-15  Robin Getz  <robin.getz@analog.com>
1440
1441         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
1442
1443 2011-03-15  Robin Getz  <robin.getz@analog.com>
1444
1445         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
1446         high bit is set after extract_mult.
1447         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
1448         functions.  Use these to update the AN bit.
1449
1450 2011-03-15  Robin Getz  <robin.getz@analog.com>
1451
1452         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
1453         the extract_mult functions.  Include these when updating the V, VS,
1454         and V_COPY bits.
1455
1456 2011-03-15  Robin Getz  <robin.getz@analog.com>
1457
1458         * bfin-sim.c (astat_names): New global bit array.
1459         (decode_CC2stat_0): Delete local astat_name and astat_names.
1460         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
1461         Print out ASTAT bit values when checking an ASTAT register.
1462
1463 2010-03-15  Robin Getz  <robin.getz@analog.com>
1464
1465         * bfin-sim.c (extract_mult): Handle M_IU.
1466
1467 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
1468
1469         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
1470         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
1471         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
1472         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
1473         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
1474         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
1475         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
1476         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
1477         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
1478         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
1479         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
1480         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
1481         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
1482         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
1483         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
1484         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
1485         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
1486         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
1487         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
1488         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
1489         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
1490         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
1491         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
1492         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
1493         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
1494         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
1495         tconfig.in: New Blackfin port.