1 2014-03-10 Mike Frysinger <vapier@gentoo.org>
3 * interp.c (sim_do_command): Add const to cmd.
5 2014-03-05 Mike Frysinger <vapier@gentoo.org>
7 * interp.c (sim_load): Add const to prog.
9 2014-03-04 Mike Frysinger <vapier@gentoo.org>
11 * configure: Regenerate.
13 2013-09-23 Alan Modra <amodra@gmail.com>
15 * configure: Regenerate.
17 2013-06-03 Mike Frysinger <vapier@gentoo.org>
19 * aclocal.m4, configure: Regenerate.
21 2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
25 2012-06-19 Joel Brobecker <brobecker@adacore.com>
27 * interp.c: #include "config.h" instead of "sysdep.h".
28 Add conditional include of string.h or strings.h, as well as
29 conditional include of stdlib.h.
31 2012-06-15 Joel Brobecker <brobecker@adacore.com>
33 * config.in, configure: Regenerate.
35 2012-05-24 Pedro Alves <palves@redhat.com>
39 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
41 2012-03-24 Mike Frysinger <vapier@gentoo.org>
43 * aclocal.m4, config.in, configure: Regenerate.
45 2011-12-03 Mike Frysinger <vapier@gentoo.org>
47 * aclocal.m4: New file.
48 * configure: Regenerate.
50 2011-10-17 Mike Frysinger <vapier@gentoo.org>
52 * configure.ac: Change include to common/acinclude.m4.
54 2011-10-17 Mike Frysinger <vapier@gentoo.org>
56 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
57 call. Replace common.m4 include with SIM_AC_COMMON.
58 * configure: Regenerate.
60 2010-04-14 Mike Frysinger <vapier@gentoo.org>
62 * interp.c (sim_write): Add const to buffer arg.
64 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
66 * configure: Regenerate.
68 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
70 * config.in: Regenerate.
71 * configure: Likewise.
73 * configure: Regenerate.
75 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
77 * configure: Regenerate to track ../common/common.m4 changes.
80 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
81 Daniel Jacobowitz <dan@codesourcery.com>
82 Joseph Myers <joseph@codesourcery.com>
84 * configure: Regenerate.
86 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
89 * config.in: Regenerate.
91 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
93 * configure: Regenerated.
95 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
97 * configure: Regenerated.
99 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
101 * configure: Regenerated.
103 2006-04-18 Nick Clifton <nickc@redhat.com>
105 * interp.c (sim_stop_reason): Fix typo.
107 2005-11-28 Mark Mitchell <mark@codesourcery.com>
109 * interp.c (gdb/signals.h): Include it.
110 (sim_stop_reason): Use TARGET_SIGNAL_*.
112 2005-03-23 Mark Kettenis <kettenis@gnu.org>
114 * configure: Regenerate.
116 2005-01-14 Andrew Cagney <cagney@gnu.org>
118 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
119 explicit call to AC_CONFIG_HEADER.
120 * configure: Regenerate.
122 2005-01-12 Andrew Cagney <cagney@gnu.org>
124 * configure.ac: Update to use ../common/common.m4.
125 * configure: Re-generate.
127 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
129 * configure: Regenerated to track ../common/aclocal.m4 changes.
131 2005-01-07 Andrew Cagney <cagney@gnu.org>
133 * configure.ac: Rename configure.in, require autoconf 2.59.
134 * configure: Re-generate.
136 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
138 * configure: Regenerate for ../common/aclocal.m4 update.
140 2004-06-28 Andrew Cagney <cagney@gnu.org>
142 * interp.c (sim_resume): Rename ui_loop_hook to
143 deprecated_ui_loop_hook.
145 2003-10-30 Andrew Cagney <cagney@redhat.com>
147 * simops.c: Replace "struct symbol_cache_entry" with "struct
150 2003-06-22 Andrew Cagney <cagney@redhat.com>
152 * interp.c (xfer_mem): Simplify. Only do a single partial
153 transfer. Problem reported by Tom Rix.
155 2003-05-07 Andrew Cagney <cagney@redhat.com>
157 * interp.c (sim_d10v_translate_addr): Add "regcache" parameter.
158 (sim_d10v_translate_imap_addr): Ditto.
159 (sim_d10v_translate_dmap_addr): Ditto.
160 (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr.
161 (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr.
162 (dmap_register, imap_register): Add "regcache" parameter.
163 (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr.
164 (sim_fetch_register): Pass NULL regcache to imap_register and
167 2003-02-27 Andrew Cagney <cagney@redhat.com>
169 * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
171 2002-11-13 Andrew Cagney <cagney@redhat.com>
173 * simops.c: Include <string.h>.
175 2002-06-17 Andrew Cagney <cagney@redhat.com>
177 * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.
179 2002-06-16 Andrew Cagney <ac131313@redhat.com>
181 * configure: Regenerated to track ../common/aclocal.m4 changes.
183 2002-06-13 Tom Rix <trix@redhat.com>
185 * interp.c (xfer_mem): Fix transfers across multiple segments.
187 2002-06-09 Andrew Cagney <cagney@redhat.com>
189 * Makefile.in (INCLUDE): Update path to callback.h.
190 * gencode.c: Do not include "callback.h".
191 * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
194 2002-06-08 Andrew Cagney <cagney@redhat.com>
196 * interp.c (sim_fetch_register): Fix name of enum used in cast.
197 (sim_store_register): Ditto.
199 2002-06-02 Elena Zannoni <ezannoni@redhat.com>
201 From Jason Eckhardt <jle@redhat.com>
202 * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is
203 less than MOD_S (post-decrement).
205 2002-06-01 Andrew Cagney <ac131313@redhat.com>
207 * interp.c (sim_fetch_register, sim_store_register): Use a switch
208 statement and enums from "sim-d10v.h".
210 2002-05-28 Elena Zannoni <ezannoni@redhat.com>
212 * interp.c (sim_create_inferior): Add comment.
214 From Alan Matsuoka <alanm@redhat.com>:
215 From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
216 * simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
217 (OP_4401): Output "mvf0t" instead of "mf0t".
218 (OP_460B): Do not output a flag register.
219 (OP_4609): Do not output a flag register.
221 2002-05-23 Andrew Cagney <ac131313@redhat.com>
223 * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
224 * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
226 2001-08-01 John R. Moore <jmoore@redhat.com>
228 * interp.c (sim_create_inferior): Removed a hack that stated
229 it was setting r0/r1 with argc/argv.
231 2001-04-15 J.T. Conklin <jtc@redback.com>
233 * Makefile.in (simops.o): Add simops.h to dependency list.
235 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
237 * configure: Regenerated to track ../common/aclocal.m4 changes.
239 Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
241 * interp.c (sim_resume): Deliver SIGILL.
242 (lookup_hash): Do not print SIGILL message.
244 Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
246 * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT.
247 * interp.c (sim_set_trace): Replace sim_trace. Enable tracing.
249 Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
251 * d10v_sim.h (SIG_D10V_BUS): Define.
253 * simops.c (address_exception): Delete function.
254 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
255 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
256 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
257 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to
258 address_exception with code that sets SIG_D10V_BUS.
260 * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus
261 error to the simulator before resuming execution.
262 (sim_trace): Check stop reason and use that to determine sim_trace
264 (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV
267 Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com>
269 * interp.c (sim_create_inferior): Change internal initial value for
272 Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
274 * interp.c (lookup_hash): Stop the update of the PC when there was
275 an illegal instruction exception.
277 Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
279 * simops.c (address_exception): New function.
280 (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
281 OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
282 OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
283 OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
284 and "st2w" check that the address is aligned.
286 1999-12-30 Chandra Chavva <cchavva@cygnus.com>
288 * d10v_sim.h (INC_ADDR): Added code to assign
289 proper address for loads with predec operations.
291 1999-11-25 Nick Clifton <nickc@cygnus.com>
293 * simops.c (OP_4E0F): New function: Simulate new bit pattern for
296 Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
298 * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
301 Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
303 * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
304 (PSW_HW_MASK): Declare.
306 * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
307 (SET_CREG, SET_PSW_BIT): Update.
308 (SET_HW_CREG, SET_HW_PSW): Define.
310 Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
312 * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
315 Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
317 * interp.c (sim_d10v_translate_addr): New function.
318 (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
319 (map_memory): Make INLINE.
321 Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
323 * interp.c (sim_d10v_translate_dmap_addr): New function.
324 (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
325 offset parameter to type uint16.
326 * d10v_sim.h (dmem_addr): Update declaration.
328 Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
330 * interp.c (imap_register, set_imap_register, dmap_register,
331 set_imap_register): Use map_memory.
333 (sim_create_inferior): Initialize all DMAP registers. NOTE that
334 DMAP2, in internal memory mode, is set to 0x0000 and NOT
335 0x2000. This is consistent with the older d10v boards.
337 Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
339 * interp.c (sim_d10v_translate_imap_addr): New function.
340 (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
341 (last_from, last_to): Declare.
343 Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
345 * d10v_sim.h (struct d10v_memory): Define. Support very long
347 (struct _state): Replace imem, dmem and umem by mem.
348 (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
349 DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
351 * interp.c (map_memory): New function.
352 (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
353 (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
354 (IMEM_SIZEDMEM_SIZE): Delete.
356 Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
358 * interp.c: Include "sim-d10v.h".
359 (imap_register, set_imap_register, dmap_register,
360 set_dmap_register, spi_register, spu_register, set_spi_register,
361 set_spu_register): New functions.
362 (sim_create_inferior): Update.
363 (sim_fetch_register, sim_store_register): Rewrite. Use enums
364 defined in sim-d10v.h.
366 * d10v_sim.h (DEBUG_MEMORY): Define.
367 (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
369 Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
371 * interp.c (sim_open): Allow a debug value to be passed to the -t
373 (lookup_hash): Don't exit on an illegal instruction.
374 (do_long, do_2_short, do_parallel): Check for failed instruction
377 Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
379 * simops.c (OP_3220): Fix trace output for illegal accumulator
382 1999-09-14 Nick Clifton <nickc@cygnus.com>
384 * simops.c: Disable setting of DM bit in PSW.
386 Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
388 * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
389 (trace_input_func): Added support for OP_MEMREF3.
390 (OP_32010000): New instruction ld.
391 (OP_33010000): New instruction ld2w.
392 (OP_5209): New instruction sac.
393 (OP_4209): New instruction sachi.
394 (OP_3220): New instruction slae.
395 (OP_36010000): New instruction st.
396 (OP_37010000): New instruction st2w.
398 1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
400 * interp.c (old_segment_mapping): New global.
401 (xfer_mem): Change the default segment mapping to be the way
402 that Mitsubishi prefers, but use the previous mapping if
403 old_segment_mapping is true.
404 (sim_open): Add an option -oldseg to get the old mapping.
405 (sim_create_inferior): Init mapping registers based on the
406 value of old_segment_mapping.
408 1999-09-07 Nick Clifton <nickc@cygnus.com>
410 * simops.c (OP_6601): Do not write back decremented address if
411 either of the destination registers was the same as the address
413 (OP_6201): Do not write back incremented address if either of the
414 destination registers was the same as the address register.
416 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
418 * configure: Regenerated to track ../common/aclocal.m4 changes.
420 1999-05-08 Felix Lee <flee@cygnus.com>
422 * configure: Regenerated to track ../common/aclocal.m4 changes.
424 1999-04-02 Keith Seitz <keiths@cygnus.com>
426 * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
428 (sim_resume): If the counter has expired, call the ui_loop_hook,
430 (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
432 * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
434 Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
436 * simops.c: If load instruction with auto increment/decrement
437 addressing is used when the destination register is the same as
438 the address register, then ignore the auto increment/decrement.
440 Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
442 * simops.c (OP_5F00): Ifdef SYS_stat case because
443 not all systems have it defined.
445 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
447 * simops.c (OP_5607): Correct saturation comparison/assignment.
448 (OP_1201, OP_1203, OP_17001200, OP_17001202,
449 OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
450 OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
452 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
454 * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
460 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
462 * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
465 Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
467 * simops.c (sys/syscall.h): Include targ-vals.h instead.
468 (SYS_*): Replace with TARGET_SYS_*.
470 * Makefile.in: Add dependency on targ-vals.h.
471 (NL_TARGET): Define as NL_TARGET_d10v.
473 Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
475 * interp.c (xfer_mem): Missing break, instruction memory case
476 flowed into unified memory case.
478 Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
480 * simops.c: If load instruction with auto increment/decrement
481 addressing is used when the destination register is the same as
482 the address register, then ignore the auto increment/decrement.
484 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
486 * configure: Regenerated to track ../common/aclocal.m4 changes.
488 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
490 * configure: Regenerated to track ../common/aclocal.m4 changes.
493 Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
495 * acconfig.h: New file.
496 * configure.in: Reverted change of Apr 24; use sinclude again.
498 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
500 * configure: Regenerated to track ../common/aclocal.m4 changes.
503 Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
505 * configure.in: Don't call sinclude.
507 Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
509 * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
511 * d10v_sim.h (remote-sim.h, sim-config.h): Include.
513 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
515 * configure: Regenerated to track ../common/aclocal.m4 changes.
517 Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
519 * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
521 (OP_OP_1000000, add3): Trace inputs before performing add.
522 (OP_5F00, <*>): Trace input registers before making system call.
523 (OP_5F00, <kill>): Trace R0, R1 not REGn.
524 (OP_5F00, <getpid>): Always return 47.
526 * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
527 SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
529 (struct _state): Add struct slot slot to global state variable.
530 (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
531 F0, F1, C from global State variable.
532 (struct _state): Add struct trace to global State variable.
533 (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
534 (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
535 (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
536 (INC_ADDR): Re-implement. Use SET_GPR to update registers.
537 (JMP): Re-implement. Use SET_* to update registers.
539 * interp.c: Use new SET_* et.al. macros to fetch / store
541 (get_operands): Squirrel away trace values at start of each
543 (do_2_short): Flush pending writes before issuing second
545 (sim_resume): Flush pending writes at end of instruction cycle.
546 (sim_fetch_register, sim_store_register, sim_create_inferior):
547 After scheduling updates to registers using SET_*, flush updates.
548 (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
549 that each sets pc using SET_* and last SET_* eventually winds out.
551 * simops.c: Use new SET_* et.al. macros to fetch / store
553 (move_to_cr): Add MASK argument for selective update of CREG bits.
554 Re-implement using new SET_* macros.
555 (trace_output_func, trace_output): Delete. Replace with.
556 (do_trace_output_flush, trace_output_finish, trace_output_40,
557 trace_output_32, trace_output_16, trace_output_void,
558 trace_output_flag): New functions. Handle specific trace cases.
559 (OP_*): Re-write tracing to use new trace_output_* functions.
560 (OP_*): Re-write to use new SET_* et.al. macros.
561 (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
562 (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
564 Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
566 * configure.in (SIM_AC_OPTION_WARNINGS): Add.
567 configure: Re-generate.
569 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
571 * configure: Regenerated to track ../common/aclocal.m4 changes.
573 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
575 * configure: Regenerated to track ../common/aclocal.m4 changes.
577 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
579 * configure: Regenerated to track ../common/aclocal.m4 changes.
581 Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
583 * interp.c (sim_store_register, sim_fetch_register): Pass in
584 length parameter. Return -1.
586 Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
588 * (dmem_addr): If address is illegal or in I/O space, signal a bus
589 error. Allocate unified memory on demand. Fix DMEM address
592 Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
594 * simops.c (OP_5F20): Implement "dbt".
595 (OP_5F60): Implement "rtd".
597 * d10v_sim.h (DPC_CR): Define enum.
598 (DBT_VECTOR_START): Define
601 Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
603 * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
606 * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
609 Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
611 * simops.c (OP_5F00): Call error instead of abort for unknown
614 * d10v_sim.h (enum): Define DPSW_CR.
616 * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
618 Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
620 * interp.c (sim_write_phys): Delete.
621 (sim_load): Call sim_load_file with sim_write and LMA.
623 Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
625 * interp.c: Rewrite xfer_mem so that it translates addresses as -
626 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
627 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
630 (imem_addr): New function - translate IMEM address.
631 (sim_resume): Use imem_addr to translate insn address, abort if
633 (sim_create_inferior): Write ARGV to memory using sim_write. Pass
634 argc/argv using r0/r1 not r2/r3.
635 (sim_size): Do not initialize IMAP/DMAP here.
636 (sim_open): Call sim_create_inferior and sim_size to initialize
638 (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
640 (init_system): Delete.
641 (xfer_mem, sim_fetch_register, sim_store_register): Do not call
643 (decode_pc): Check prog_bfd is defined before looking up .text
646 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
648 * configure: Regenerated to track ../common/aclocal.m4 changes.
650 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
652 * configure: Regenerated to track ../common/aclocal.m4 changes.
654 Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
656 * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
658 Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
660 * d10v_sim.h (DEBUG_TRAP): New debug flag.
662 * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
663 printing the registers.
665 Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
667 * simops.c (op_types): New ABI, args are r0..r3, system call # is
669 (trace_{in,out}put_func): Ditto.
671 (OP_24800000): Ditto.
675 Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
677 * interp.c (UMEM_SEGMENTS): New define, set to 128.
678 (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
679 (sim_close): Reset prog_bfd to NULL after closing it. Also
680 reset prog_bfd_was_opened_p after closing prog_bfd.
681 (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
682 (sim_create_inferior): Get start address from abfd not prog_bfd.
683 (xfer_mem): Do bounds checking on addresses and return zero length
684 read/write on bad addresses, rather than aborting. Prepare to
685 be able to handle xfers that cross segment boundaries, but not
686 yet implemented. Only emit debug message when d10v_debug is
687 set as well as DEBUG being defined.
689 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
691 * configure: Regenerated to track ../common/aclocal.m4 changes.
693 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
695 * configure: Regenerated to track ../common/aclocal.m4 changes.
698 Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
700 * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
701 (BPSW): Ditto for BPSW_CR and not PSW_CR.
703 * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
705 Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
707 * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
708 reserved trap from 0 to 15. Add trap emulation code for 0-14.
710 * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
713 * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
714 SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
716 * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
718 (OP_5F00): For "trap", update BPSW with move_to_cr.
720 Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
722 * d10v_sim.h (enum): Enumerate CR register names.
723 (enum): Enumerate PSW bit values.
724 (PSW): Obtain value uing move_from_cr.
725 (MOD_S, MOD_E, BPSW): Make r-values.
726 (move_from_cr, move_to_cr): Declare functions.
728 * interp.c (sim_fetch_register, sim_store_register): Use
729 move_from_cr and move_to_cr for CR register transfers.
731 * simops.c (move_from_cr, move_to_cr): New functions.
732 (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
733 (OP_5600): For "mvtc", use function move_to_cr.
734 (OP_5200): For "mvfc", use function move_from_cr.
736 Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
738 * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
741 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
743 * configure: Regenerated to track ../common/aclocal.m4 changes.
745 Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
747 * d10v_sim.h (struct _state): Add DM - PSW debug mask.
749 * simops.c (OP_5600): For "mvtc", save PSW.DM.
750 (OP_5200): Ditto for "mvfc".
752 Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
754 * d10v_sim.h (SEXT56): Define.
756 * simops.c (OP_4201): For "rac", sign extend 56 bit value before
759 * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
762 Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
764 * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
765 RIGHT_FIRST, as appropriate, instead of hardcoded ints that
766 don't match enum values.
768 Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
770 * simops.c (OP_3A00): For "macu", perform multiply stage using 32
771 bit rather than 16 bit precision.
772 (OP_3C00): For "mulxu", store unsigned product in ACC.
773 (OP_3800): For "msbu", subtract unsigned product from ACC,
774 (OP_0): For "sub", compute carry by comparing inputs.
776 Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
778 * simops.c (OP_1000): For "sub2w", compute carry by comparing
781 Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
783 * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
784 carry indicated by value > 0xffff.
786 Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
788 * interp.c (sim_resume): Don't set up SIGINT handler using signal,
790 (sim_resume): Fix race condition of a direct assignment to
791 stop_simulator, conditionally call sim_stop.
792 (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
793 stop_simulator ready for next sim_resume call.
794 (sim_ctrl_c): Delete function.
796 Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
798 * interp.c (sim_resume): For "REP", only check/update the PC when
799 a branch instruction has not been executed.
801 Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
803 * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
804 extend bit 44 all constants.
805 (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
807 Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
809 * d10v_sim.h: Include sim-types.h.
810 (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
811 using unsigned8 et.al. from sim-types.h.
812 (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
815 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
817 * interp.c (sim_write_phys): New function, write to physical
818 instead of virtual memory.
820 * interp.c (sim_load): Pass lma_p and sim_write_phys to
823 Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
825 * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
826 exception generation code to OP_6E01.
827 (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
830 Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
832 * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
835 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
837 * configure: Regenerated to track ../common/aclocal.m4 changes.
839 Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
841 * interp.c (pc_addr): Discard upper bit(s) of PC in case
842 IMAP1 selects unified memory.
843 * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
846 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
848 * configure: Regenerated to track ../common/aclocal.m4 changes.
850 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
852 * configure: Regenerated to track ../common/aclocal.m4 changes.
854 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
856 * configure: Regenerated to track ../common/aclocal.m4 changes.
858 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
860 * configure: Regenerated to track ../common/aclocal.m4 changes.
862 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
864 * configure: Regenerated to track ../common/aclocal.m4 changes.
866 Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
868 * interp.c (sim_resume): Increment PC at end of rep
871 * simops.c (OP_4201): Fix rachi instruction.
873 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
875 * configure: Regenerated to track ../common/aclocal.m4 changes.
877 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
879 * configure: Regenerated to track ../common/aclocal.m4 changes.
882 Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
884 * interp.c (sim_kill): Delete.
885 (sim_create_inferior): Add ABFD argument.
886 (sim_load): Move setting of PC from here.
887 (sim_create_inferior): To here.
888 (start_address): Delete variable.
890 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
892 * configure: Regenerated to track ../common/aclocal.m4 changes.
895 Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
897 * interp.c (sim_open): Add ABFD argument.
899 Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
901 * interp.c (sim_open): Add callback argument.
902 (sim_set_callbacks): Remove SIM_DESC argument.
904 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
906 * configure: Regenerated to track ../common/aclocal.m4 changes.
908 Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
910 * interp.c (sim_open): Undo patch to add -E support.
912 Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
914 * interp.c (sim_stop): New function.
916 Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
918 * Makefile.in (SIM_OBJS): Add sim-load.o.
919 * d10v_sim.h (exec_bfd): Rename to prog_bfd.
920 * interp.c: #include bfd.h.
921 (myname, sim_kind, start_address): New static locals.
922 (prog_bfd_was_opened_p, prog_bfd): New static locals.
923 (decode_pc): Update to use prog_bfd.
924 (sim_open): Set sim_kind, myname. Ignore -E arg.
925 (sim_close): Close prog_bfd if simulator opened it.
926 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
927 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
928 Call sim_load_file to load file into simulator.
929 * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
931 Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
933 * simops.c (OP_5F00): Only provide system calls SYS_execv,
934 SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
936 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
938 * configure: Regenerated to track ../common/aclocal.m4 changes.
941 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
943 * interp.c (sim_open): New arg `kind'.
945 * configure: Regenerated to track ../common/aclocal.m4 changes.
947 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
949 * configure: Regenerated to track ../common/aclocal.m4 changes.
951 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
953 * configure: Re-generate.
955 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
957 * configure: Regenerate to track ../common/aclocal.m4 changes.
959 * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
960 as trap 0, which will be deprecated. Only set errno, if an error
961 in fact was returned.
963 Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
965 * interp.c: Delete redundant prototypes of sim_foo fns.
966 (sim_open): New SIM_DESC result. Argument is now in argv form.
967 (other sim_*): New SIM_DESC argument.
969 Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
971 * simops.c (trace_{input,output}_func): Call flush_stdout from the
974 (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
975 (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
976 setting the carry bit after an add or a subtract.
978 Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
980 * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
981 40 bits of accumulators. Sign/zero extend as appropriate.
983 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
985 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
986 COMMON_{PRE,POST}_CONFIG_FRAG instead.
987 * configure.in: sinclude ../common/aclocal.m4.
988 * configure: Regenerated.
990 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
992 * configure configure.in Makefile.in: Update to new configure
993 scheme which is more compatible with WinGDB builds.
994 * configure.in: Improve comment on how to run autoconf.
995 * configure: Re-run autoconf to get new ../common/aclocal.m4.
996 * Makefile.in: Use autoconf substitution to install common
999 Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
1001 * gencode.c: patch to not #include "d10v_sim.h" which
1002 unecessarily includes bfd.h and causes wingdb configure
1005 Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1007 * interp.c (xfer_mem): Change unified memory to 0x0.
1009 Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1011 * simops.c (OP_3E01): Fix tracing information.
1012 (OP_300{0,1}): Do not propigate sign.
1014 Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
1016 * config.in (WORDS_BIGENDIAN): Add.
1017 * configure: Regenerated.
1018 * d10v_sim.h: #include "config.h"
1020 Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1022 * gencode.c (write_opcodes): Eliminate warnings when generated
1023 table.c is compiled.
1025 Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1027 * interp.c (sim_open): Cast result of calloc, and make sure NULL
1029 (dmem_addr): If address is illegal or in I/O space, signal a bus
1031 (pc_addr): Signal bus error, not illegal instruction for bogus
1034 Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
1036 * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
1037 (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
1038 * configure.in: Simplify using macros in ../common/aclocal.m4.
1039 Call AC_CHECK_HEADERS(unistd.h).
1040 * configure: Regenerated.
1041 * config.in: New file.
1042 * interp.c: #include "callback.h".
1043 * simops.c: #include "config.h". #include <unistd.h> if present.
1045 Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1047 * d10v-sim.h (simops): Add flag is_long.
1048 (State): Add pc_changed. Instructions which update the PC should
1049 use the JMP macro which sets this.
1050 (JMP): New macro. Sets the PC and the pc_changed flag.
1052 * gencode.c (write_opcodes): Add is_long field.
1054 * interp.c (lookup_hash): If we blindly apply a short opcode's mask
1055 to a long opcode we could get a false match. Check the opcode size.
1056 (hash): Add a size field to the hash table.
1057 (sim_open): Initialize size field in hash table.
1058 (sim_resume): Change to logic for setting the PC. Used to increment the
1059 PC if it had not been changed. This didn't allow single-instruction loops.
1060 Now checks the flag State.pc_changed. Also now stops when ^C is received.
1061 (dmem_addr): Fix translation of data segments to unified memory.
1062 (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
1064 * simops.c: Changed all branch and jump instructions to use new JMP macro.
1065 (OP_20000000): Corrected trace information to show this is a ldi.l, not
1066 a ldi.s instruction.
1068 Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1070 * interp.c (sim_fetch_register, sim_store_register): Fix bug where
1071 updating the accumulators was overwriting other parts of the global
1074 Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1076 * interp.c (bfd.h) Don't include it here any more.
1077 (text{,_start,_end}): Move here from simops.c and make extern.
1078 (decode_pc): New function to return the PC as an address that the
1080 (dmem_addr): Print decoded PC in error message.
1083 * simops.c (bfd.h) Don't include it here any more.
1084 (text{,_start,_end}): Move to simops.c.
1085 (trace_input_func): Move decoding of PC, and looking up .text
1088 * d10v_sim.h (bfd.h): Include it here.
1089 (text{,_start,_end}): Add external declarations.
1093 Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1095 * interp.c (sim_size): Now allocates unified memory for imap segments
1096 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
1097 (sim_write): Just call xfer_mem().
1098 (sim_read): Just call xfer_mem().
1099 (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
1100 (dmem_addr): New function. Reads dmap register and translates data
1101 addresses to local addresses.
1102 (pc_addr): New function. Reads imap register and computes local address
1103 corresponding to contents of the PC.
1104 (sim_resume): Change to use pc_addr().
1105 (sim_create_inferior): Change reinitialization code. Also reinitializes
1107 (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1108 (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
1110 * simops.c (MEMPTR): Redefine to use dmem_addr().
1111 (OP_5F00): Replace references to STate.imem with dmem_addr().
1113 * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
1114 (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
1115 (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
1117 Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1119 * d10v_sim.h (_ins_type): Reorganize, so that we can provide
1120 better statistics, like not counting NOPS as parallel
1121 instructions, and printing total cycles.
1122 (ins_type_counters): Make unsigned long.
1123 (left_nops,right_nops): Fold into ins_type_counters.
1125 * simops.c (trace_input_func): Print new instruction types.
1126 Handle OP_R2R3 as input types.
1127 (OP_{38000000,7000}): Correctly sign extend bytes.
1128 (OP_5E00): Don't count NOPs as parallel instructions.
1129 (OP_460B): Remove unused variable.
1132 * interp.c (ins_type_counters): Make unsigned long.
1133 (left_nops,right_nops): Delete.
1134 (most functions): Add prototypes.
1135 (INLINE): If GCC and optimize define as __inline__.
1136 ({,lookup_}hash,get_operands): Declare as INLINE.
1137 (do_parallel): Count conditional operations.
1138 (add_commas): New function, to add commas every 3 digits.
1139 (sim_size): Call add_commas to print numbers.
1140 (sim_{open,resume}): Delete unused variables.
1141 (sim_info): Provide better statistics.
1142 (sim_read): Add int return type.
1144 Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1146 * interp.c (sim_resume): Change the way single-stepping and exceptions
1147 are handled so single-stepping works again.
1149 Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1151 * endian.c: Optimize simulated loads/stores on x86, AIX, and big
1154 * configure.in (--enable-sim-bswap): New switch to enable using
1155 the BSWAP instruction on x86's.
1156 * configure: Regenerate.
1158 * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
1161 Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1163 * endian.c: New file. Move endian functions here from interp.c.
1164 Optimize code, and make it work as either inline functions or as a
1167 * interp.c: Move endian functions from here to endian.c.
1169 * Makefile.in (INCLUDE): Add endian.c.
1170 (run,libsim.a): Add dependency on endian.o.
1171 (endian.o): Add dependency.
1173 * d10v_sim.h (read/write support): Always go through the machine
1174 independent endian functions. If compiling with GCC and
1175 optimizing, include endian.c so the endian functions are inlined.
1177 * simops.c (OP_5F00): Correct tracing of accumulators.
1179 Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1181 * simops.c (OP_5F00): Add support for getpid, kill system calls.
1183 * interp.c (do_{2_short,parallel}): If an exception is raised,
1184 don't execute the second instruction.
1186 Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1188 * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
1189 temporary in case the register is overriden when loading.
1190 (OP_6200): Output type is OP_DREG for tracing.
1192 Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1194 * d10v_sim.h (struct _state): Add mem_{min,max} fields.
1196 * interp.c (sim_size): Initialize mem_{min,max} fields.
1197 (sim_write): Update mem_{min,max} fields.
1198 (sim_resume): If PC is not in the minimum/maximum memory range,
1200 (sim_create_inferior): Preserve mem_{min,max} fields.
1202 Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
1204 * simops.c (OP_5F00): Add support for time() system call.
1206 Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1208 * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
1210 (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
1213 Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1215 * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
1216 (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
1217 (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
1218 to call/subroutine returns to trace the first two arguments and
1219 the return value. For small jumps, use CONSTANT8, not CONSTANT16.
1221 Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1223 * interp.c (sim_create_inferior): Reinitialize State every time
1224 sim_create_inferior() is called.
1226 Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
1228 * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
1230 (OP_401): Fix tracing information.
1232 Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1234 * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
1235 (trace_input_func): Use them.
1236 (trace_input_func): Make sure there is a trailing space after the
1238 (OP_6200): Fix tracing info.
1240 * Makefile.in (run): Add dependencies on libbfd.a and
1243 Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1245 * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
1246 numbers and function names in debug trace.
1247 (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
1249 (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
1250 and exit system call trap being executed.
1252 * interp.c (sim_stop_reason): Set exit code correctly for stop
1253 instruction and exit system call trap.
1255 * configure.in (--enable-sim-cflags): Remove trace case.
1256 (--enable-sim-debug): New switch to set the debug values.
1257 * configure: Regenerate.
1259 * simops.c (trace_{input,output}_func): Rename from
1260 trace_{input,output}.
1261 (trace_{input,output}): Call trace_{input,output}_func if
1262 d10v_debug is non-zero.
1263 (SIZE_INSTRUCTION): Cut down to 8.
1264 (SIZE_OPERANDS): Cut down to 18.
1265 (SIZE_LOCATION): New value for size of line number, function name
1267 (init_text_p,text{,_start,_end}): New static variables for
1268 printing line number and function name.
1269 (exec_bfd): New external that run.c sets.
1270 (trace_input_func): Print line number and function name if
1271 available and if desired.
1272 (OP_4E09): Don't print out DBT message.
1273 (OP_5FE0): Set exception field to SIG_D10V_STOP.
1274 (OP_5F00): Set exception field to SIG_D10V_EXIT.
1276 Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1278 * interp.c (do_2_short): If the instruction encodes jump->ins,
1279 don't do the second instruction if the jump succeeds.
1281 Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1283 * simops.c (OP_5F00): Use unknown traps to print all GPRs,
1284 accumulators, PC, and F0/F1/C flags.
1286 Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
1288 * simops.c (OP_5F00): Fix problems with system calls.
1290 Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1292 * simops.c (OP_5F00): Correct tracing information for trap.
1294 Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1296 * Makefile.in (CSEARCH): Correctly find opcodes directory.
1298 Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1300 * simops.c (trace_output): Properly align accumulator output.
1301 (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
1302 if shift count is too high.
1303 (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
1304 (OP_4E09): Make cpfg properly trace the input flags.
1305 (op_types): Add OP_FLAG_OUTPUT.
1306 (trace_{input,output}): Support OP_FLAG_OUTPUT.
1307 (OP_31000000): This ld2w varient is a 16-bit memory reference, not
1308 an 8-bit memory reference instruction for tracing purposes.
1309 (OP_201): Addi needs to set the carry.
1311 Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1313 * simops.c (OP_2600, OP_2601): Changed min and max comparisons
1314 to use signed register values.
1316 Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1318 * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
1320 (_ins_type): New enumeration to specify which container an
1321 instruction is in, and whether it is part of a parallel operation.
1322 (_state): Add ins_type field.
1323 ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
1324 (ins_type_counters): Counters for the various instruction types.
1325 ({left,right}_nops): Counters for the number of nops in each
1327 (d10v_debug): New variable to indicate whether debugging is turned
1330 * simops.c: (all functions): Change all #ifdef DEBUG code so that
1331 the input and output values can be traced, along with the
1332 instruction type. Make the -t option enable tracing.
1333 (all functions): Change printf calls to use the printf_filtered
1334 function in the callback table.
1336 * interp.c (_leftright): New enumeration to say whether 2 short
1337 instructions are done left first or right first.
1338 (do_{long,2_short,parallel}): Indicate in the machine state which
1339 type of instruction this is. Count each of the types of
1340 instructions executed.
1341 (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
1343 (sim_resume): Pass left/right indication to do_2_short.
1344 (all functions): Change printf calls to use the printf_filtered
1345 function in the callback table.
1346 (sim_trace): Turn on debug flag if DEBUG was defined, and call
1348 (sim_info): Print out statistics on instructions.
1349 (sim_{trace,create_inferior}): Eliminate extraneous output unless
1351 (sim_open): If args == -t and DEBUG was defined, set d10v_debug.
1352 Only initialize the hash table the first time sim_open is called.
1354 * Makefile.in: Make objects depend on d10v_sim.h.
1355 ({,SIM_}CFLAGS): Include configure dependent switches. Setting
1356 CFLAGS does not override host/target defines or SIM_CFLAGS.
1357 (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
1358 (run): By default, the math library is not needed to be linked
1360 ({BFD,LIBIBERTY}_LIB): Define as variables so they can be
1362 (VPATH): Don't set to anything but @srcdir@ to work with non-GNU
1364 ({run,callback}.o): Provide explicit paths to their appropriate
1366 (gencode{,.o},d10v-opc.o): Split compilation into creating object
1367 and linking. Instead of linking in libopcodes.a, just compile
1368 d10v-opc.o directly to handle canadian cross.
1369 (CSEARCH): Add opcodes directory.
1371 * configure.in (--enable-sim-cflags): New switch to allow user to
1373 (CC_FOR_BUILD): Deal with canadian crosses.
1374 * configure: Regenerate.
1376 Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
1378 * simops.c: Include correct syscall.h for d10v, not host's.
1379 Fix #ifdef SYS_stat.
1381 Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1383 * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
1384 Add trap 2 to be printf and trap 3 to be putchar.
1386 Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
1388 * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
1389 for low-level system calls.
1391 Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1393 * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
1395 Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1397 * d10v_sim.h (SEXT32): Added.
1398 * interp.c: Commented out printfs.
1399 * simops.c: Fixed error in sb and st2w.
1401 Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1403 * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
1404 DSP instructions. Added modulo addressing.
1406 Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1408 * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
1410 Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1412 * d10v_sim.h, simops.c: Snapshot.
1414 Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1416 * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
1417 gencode.c, interp.c, simops.c: Created.