1 Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
3 * interp.c (interrupt_event): New function. Pass exception event
4 onto exception handler.
6 * configure.in: Check for stdlib.h.
7 * configure: Regenerate.
9 * gencode.c (build_instruction): Add UNUSED attribute to tempS
11 (build_instruction): Initialize memval1.
12 (build_instruction): Add UNUSED attribute to byte, bigend,
14 (build_operands): Ditto.
16 * interp.c: Fix GCC warnings.
17 (sim_get_quit_code): Delete.
19 * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS.
21 * configure: Re-generate.
23 * Makefile.in (SIM_OBJS): Add sim-watch.o module.
25 Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
27 * interp.c (mips_option_handler): New function parse argumes using
29 (myname): Replace with STATE_MY_NAME.
30 (sim_open): Delete check for host endianness - performed by
32 (simHOSTBE, simBE): Delete, replaced by sim-endian flags.
33 (sim_open): Move much of the initialization from here.
34 (sim_load): To here. After the image has been loaded and
36 (sim_open): Move ColdReset from here.
37 (sim_create_inferior): To here.
38 (sim_open): Make FP check less dependant on host endianness.
40 * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or
42 * interp.c (sim_set_callbacks): Delete.
44 * interp.c (membank, membank_base, membank_size): Replace with
45 STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE.
46 (sim_open): Remove call to callback->init. gdb/run do this.
50 * sim-main.h (SIM_HAVE_FLATMEM): Define.
52 * interp.c (big_endian_p): Delete, replaced by
53 current_target_byte_order.
55 Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
57 * interp.c (host_read_long, host_read_word, host_swap_word,
58 host_swap_long): Delete. Using common sim-endian.
59 (sim_fetch_register, sim_store_register): Use H2T.
60 (pipeline_ticks): Delete. Handled by sim-events.
62 (sim_engine_run): Update.
64 Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
66 * interp.c (sim_stop_reason): Move code determining simEXCEPTION
68 (SignalException): To here. Signal using sim_engine_halt.
69 (sim_stop_reason): Delete, moved to common.
71 Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com>
73 * interp.c (sim_open): Add callback argument.
74 (sim_set_callbacks): Delete SIM_DESC argument.
77 Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
79 * Makefile.in (SIM_OBJS): Add common modules.
81 * interp.c (sim_set_callbacks): Also set SD callback.
82 (set_endianness, xfer_*, swap_*): Delete.
83 (host_read_word, host_read_long, host_swap_word, host_swap_long):
84 Change to functions using sim-endian macros.
85 (control_c, sim_stop): Delete, use common version.
86 (simulate): Convert into.
87 (sim_engine_run): This function.
90 * interp.c (simulation): New variable - the simulator object.
91 (sim_kind): Delete global - merged into simulation.
92 (sim_load): Cleanup. Move PC assignment from here.
93 (sim_create_inferior): To here.
95 * sim-main.h: New file.
96 * interp.c (sim-main.h): Include.
98 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
100 * configure: Regenerated to track ../common/aclocal.m4 changes.
102 Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com>
104 * tconfig.in (SIM_HAVE_BIENDIAN): Define.
106 Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com>
108 * gencode.c (build_instruction): DIV instructions: check
109 for division by zero and integer overflow before using
110 host's division operation.
112 Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com>
114 * Makefile.in (SIM_OBJS): Add sim-load.o.
115 * interp.c: #include bfd.h.
116 (target_byte_order): Delete.
117 (sim_kind, myname, big_endian_p): New static locals.
118 (sim_open): Set sim_kind, myname. Move call to set_endianness to
119 after argument parsing. Recognize -E arg, set endianness accordingly.
120 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
121 load file into simulator. Set PC from bfd.
122 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
123 (set_endianness): Use big_endian_p instead of target_byte_order.
125 Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
127 * interp.c (sim_size): Delete prototype - conflicts with
128 definition in remote-sim.h. Correct definition.
130 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
132 * configure: Regenerated to track ../common/aclocal.m4 changes.
135 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
137 * interp.c (sim_open): New arg `kind'.
139 * configure: Regenerated to track ../common/aclocal.m4 changes.
141 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
143 * configure: Regenerated to track ../common/aclocal.m4 changes.
145 Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com>
147 * interp.c (sim_open): Set optind to 0 before calling getopt.
149 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
151 * configure: Regenerated to track ../common/aclocal.m4 changes.
153 Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com>
155 * interp.c : Replace uses of pr_addr with pr_uword64
156 where the bit length is always 64 independent of SIM_ADDR.
157 (pr_uword64) : added.
159 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
161 * configure: Re-generate.
163 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
165 * configure: Regenerate to track ../common/aclocal.m4 changes.
167 Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com>
169 * interp.c (sim_open): New SIM_DESC result. Argument is now
171 (other sim_*): New SIM_DESC argument.
174 Wed Feb 26 18:32:21 1997 Gavin Koch <gavin@cygnus.com>
176 * gencode.c (POP_AND,POP_OR,POP_NOR,POP_XOR):
177 Change values to avoid overloading DOUBLEWORD which is tested
179 * gencode.c: reinstate "offending code".
182 Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com>
184 * interp.c: Fix printing of addresses for non-64-bit targets.
185 (pr_addr): Add function to print address based on size.
187 * gencode.c: #ifdef out offending code until a permanent fix
188 can be added. Code is causing build errors for non-5900 mips targets.
192 Thu Feb 20 10:40:24 1997 Gavin Koch <gavin@cetus.cygnus.com>
194 * gencode.c (process_instructions): Correct test for ISA dependent
195 architecture bits in isa field of MIPS_DECODE.
198 Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com>
200 * interp.c (simopen): Add support for LSI MiniRISC PMON vectors.
203 Tue Feb 18 17:03:47 1997 Gavin Koch <gavin@cygnus.com>
205 * gencode.c (MIPS_DECODE): Correct instruction feature flags for
209 Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com>
211 * gencode.c (build_mips16_operands): Correct computation of base
212 address for extended PC relative instruction.
215 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
217 * Makefile.in, configure, configure.in, gencode.c,
218 interp.c, support.h: add r5900.
221 Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com>
223 * interp.c (mips16_entry): Add support for floating point cases.
224 (SignalException): Pass floating point cases to mips16_entry.
225 (ValueFPR): Don't restrict fmt_single and fmt_word to even
227 (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
229 (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
230 and then set the state to fmt_uninterpreted.
231 (COP_SW): Temporarily set the state to fmt_word while calling
234 Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com>
236 * gencode.c (build_instruction): The high order may be set in the
237 comparison flags at any ISA level, not just ISA 4.
239 Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
241 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
242 COMMON_{PRE,POST}_CONFIG_FRAG instead.
243 * configure.in: sinclude ../common/aclocal.m4.
244 * configure: Regenerated.
246 Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com>
248 * configure: Rebuild after change to aclocal.m4.
250 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
252 * configure configure.in Makefile.in: Update to new configure
253 scheme which is more compatible with WinGDB builds.
254 * configure.in: Improve comment on how to run autoconf.
255 * configure: Re-run autoconf to get new ../common/aclocal.m4.
256 * Makefile.in: Use autoconf substitution to install common
259 Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com>
261 * gencode.c (build_instruction): Use BigEndianCPU instead of
264 Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com>
266 * interp.c (sim_monitor): Make output to stdout visible in
267 wingdb's I/O log window.
269 Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com>
271 * support.h: Undo previous change to SIGTRAP
274 Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com>
276 * interp.c (store_word, load_word): New static functions.
277 (mips16_entry): New static function.
278 (SignalException): Look for mips16 entry and exit instructions.
279 (simulate): Use the correct index when setting fpr_state after
280 doing a pending move.
282 Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com>
284 * interp.c: Fix byte-swapping code throughout to work on
285 both little- and big-endian hosts.
287 Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com>
289 * support.h: Make definitions of SIGTRAP and SIGQUIT consistent
290 with gdb/config/i386/xm-windows.h.
292 Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com>
294 * gencode.c (build_instruction): Work around MSVC++ code gen bug
295 that messes up arithmetic shifts.
297 Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com)
299 * support.h: Use _WIN32 instead of __WIN32__. Also add defs for
300 SIGTRAP and SIGQUIT for _WIN32.
302 Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com>
304 * gencode.c (build_instruction) [MUL]: Cast operands to word64, to
305 force a 64 bit multiplication.
306 (build_instruction) [OR]: In mips16 mode, don't do anything if the
307 destination register is 0, since that is the default mips16 nop
310 Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com>
312 * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI.
313 (build_endian_shift): Don't check proc64.
314 (build_instruction): Always set memval to uword64. Cast op2 to
315 uword64 when shifting it left in memory instructions. Always use
316 the same code for stores--don't special case proc64.
318 * gencode.c (build_mips16_operands): Fix base PC value for PC
320 (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
322 * interp.c (simJALDELAYSLOT): Define.
323 (JALDELAYSLOT): Define.
324 (INDELAYSLOT, INJALDELAYSLOT): Define.
325 (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
327 Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com)
329 * interp.c (sim_open): add flush_cache as a PMON routine
330 (sim_monitor): handle flush_cache by ignoring it
332 Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com>
334 * gencode.c (build_instruction): Use !ByteSwapMem instead of
336 * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete.
337 (BigEndianMem): Rename to ByteSwapMem and change sense.
338 (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change
339 BigEndianMem references to !ByteSwapMem.
340 (set_endianness): New function, with prototype.
341 (sim_open): Call set_endianness.
342 (sim_info): Use simBE instead of BigEndianMem.
343 (xfer_direct_word, xfer_direct_long, swap_direct_word,
344 swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word,
345 xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER
346 ifdefs, keeping the prototype declaration.
347 (swap_word): Rewrite correctly.
348 (ColdReset): Delete references to CONFIG. Delete endianness related
349 code; moved to set_endianness.
351 Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com>
353 * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
354 * interp.c (CHECKHILO): Define away.
355 (simSIGINT): New macro.
356 (membank_size): Increase from 1MB to 2MB.
357 (control_c): New function.
358 (sim_resume): Rename parameter signal to signal_number. Add local
359 variable prev. Call signal before and after simulate.
360 (sim_stop_reason): Add simSIGINT support.
361 (sim_warning, sim_error, dotrace, SignalException): Define as stdarg
363 (sim_warning): Delete call to SignalException. Do call printf_filtered
365 (AddressTranslation): Add #ifdef DEBUG around debugging message and
366 a call to sim_warning.
368 Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com>
370 * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD
373 Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com>
375 Add support for mips16 (16 bit MIPS implementation):
376 * gencode.c (inst_type): Add mips16 instruction encoding types.
377 (GETDATASIZEINSN): Define.
378 (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
379 jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
381 (MIPS16_DECODE): New table, for mips16 instructions.
382 (bitmap_val): New static function.
383 (struct mips16_op): Define.
384 (mips16_op_table): New table, for mips16 operands.
385 (build_mips16_operands): New static function.
386 (process_instructions): If PC is odd, decode a mips16
387 instruction. Break out instruction handling into new
388 build_instruction function.
389 (build_instruction): New static function, broken out of
390 process_instructions. Check modifiers rather than flags for SHIFT
391 bit count and m[ft]{hi,lo} direction.
392 (usage): Pass program name to fprintf.
393 (main): Remove unused variable this_option_optind. Change
394 ``*loptarg++'' to ``loptarg++''.
395 (my_strtoul): Parenthesize && within ||.
396 * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd.
397 (simulate): If PC is odd, fetch a 16 bit instruction, and
398 increment PC by 2 rather than 4.
399 * configure.in: Add case for mips16*-*-*.
400 * configure: Rebuild.
402 Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com>
404 * interp.c: Allow -t to enable tracing in standalone simulator.
405 Fix garbage output in trace file and error messages.
407 Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com>
409 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
410 (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define.
411 * configure.in: Simplify using macros in ../common/aclocal.m4.
412 * configure: Regenerated.
413 * tconfig.in: New file.
415 Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com>
417 * interp.c: Fix bugs in 64-bit port.
418 Use ansi function declarations for msvc compiler.
419 Initialize and test file pointer in trace code.
420 Prevent duplicate definition of LAST_EMED_REGNUM.
422 Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com>
424 * interp.c (xfer_big_long): Prevent unwanted sign extension.
426 Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk>
428 * interp.c (SignalException): Check for explicit terminating
430 * gencode.c: Pass instruction value through SignalException()
431 calls for Trap, Breakpoint and Syscall.
433 Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk>
435 * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is
436 only used on those hosts that provide it.
437 * configure.in: Add sqrt() to list of functions to be checked for.
438 * config.in: Re-generated.
439 * configure: Re-generated.
441 Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com>
443 * gencode.c (process_instructions): Call build_endian_shift when
444 expanding STORE RIGHT, to fix swr.
445 * support.h (SIGNEXTEND): If the sign bit is not set, explicitly
447 * interp.c (Convert): Fix fmt_single to fmt_long to not truncate.
448 Fix float to int conversions to produce signed values.
450 Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com>
452 * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction.
453 (process_instructions): Correct handling of nor instruction.
454 Correct shift count for 32 bit shift instructions. Correct sign
455 extension for arithmetic shifts to not shift the number of bits in
456 the type. Fix 64 bit multiply high word calculation. Fix 32 bit
457 unsigned multiply. Fix ldxc1 and friends to use coprocessor 1.
459 * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC.
460 It's OK to have a mult follow a mult. What's not OK is to have a
462 (Convert): Comment out incorrect rounding code.
464 Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk>
466 * interp.c (sim_monitor): Improved monitor printf
467 simulation. Tidied up simulator warnings, and added "--log" option
468 for directing warning message output.
469 * gencode.c: Use sim_warning() rather than WARNING macro.
471 Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com>
473 * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and
474 getopt1.o, rather than on gencode.c. Link objects together.
475 Don't link against -liberty.
476 (gencode.o, getopt.o, getopt1.o): New targets.
477 * gencode.c: Include <ctype.h> and "ansidecl.h".
478 (AND): Undefine after including "ansidecl.h".
479 (ULONG_MAX): Define if not defined.
480 (OP_*): Don't define macros; now defined in opcode/mips.h.
481 (main): Call my_strtoul rather than strtoul.
482 (my_strtoul): New static function.
484 Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com)
486 * gencode.c (process_instructions): Generate word64 and uword64
487 instead of `long long' and `unsigned long long' data types.
488 * interp.c: #include sysdep.h to get signals, and define default
490 * (Convert): Work around for Visual-C++ compiler bug with type
492 * support.h: Make things compile under Visual-C++ by using
493 __int64 instead of `long long'. Change many refs to long long
494 into word64/uword64 typedefs.
496 Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
498 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
499 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
501 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
502 (AC_PROG_INSTALL): Added.
503 (AC_PROG_CC): Moved to before configure.host call.
504 * configure: Rebuilt.
506 Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk>
508 * configure.in: Define @SIMCONF@ depending on mips target.
509 * configure: Rebuild.
510 * Makefile.in (run): Add @SIMCONF@ to control simulator
512 * gencode.c: Change LOADDRMASK to 64bit memory model only.
513 * interp.c: Remove some debugging, provide more detailed error
514 messages, update memory accesses to use LOADDRMASK.
516 Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com>
518 * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS,
519 AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set
521 * configure: Rebuild.
522 * config.in: New file, generated by autoheader.
523 * interp.c: Include "config.h". Include <stdlib.h>, <string.h>,
524 and <strings.h> if they exist. Replace #ifdef sun with #ifdef
525 HAVE_ANINT and HAVE_AINT, as appropriate.
526 * Makefile.in (run): Use @LIBS@ rather than -lm.
527 (interp.o): Depend upon config.h.
528 (Makefile): Just rebuild Makefile.
529 (clean): Remove stamp-h.
530 (mostlyclean): Make the same as clean, not as distclean.
531 (config.h, stamp-h): New targets.
533 Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk>
535 * interp.c (ColdReset): Fix boolean test. Make all simulator
538 Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk>
540 * interp.c (xfer_direct_word, xfer_direct_long,
541 swap_direct_word, swap_direct_long, xfer_big_word,
542 xfer_big_long, xfer_little_word, xfer_little_long,
543 swap_word,swap_long): Added.
544 * interp.c (ColdReset): Provide function indirection to
545 host<->simulated_target transfer routines.
546 * interp.c (sim_store_register, sim_fetch_register): Updated to
547 make use of indirected transfer routines.
549 Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk>
551 * gencode.c (process_instructions): Ensure FP ABS instruction
553 * interp.c (AbsoluteValue): Add routine. Also provide simple PMON
556 Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk>
558 * interp.c (sim_do_command): Complain if callback structure not
561 Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk>
563 * interp.c (Convert): Provide round-to-nearest and round-to-zero
564 support for Sun hosts.
565 * Makefile.in (gencode): Ensure the host compiler and libraries
566 used for cross-hosted build.
568 Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk>
570 * interp.c, gencode.c: Some more (TODO) tidying.
572 Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk>
574 * gencode.c, interp.c: Replaced explicit long long references with
575 WORD64HI, WORD64LO, SET64HI and SET64LO macro calls.
576 * support.h (SET64LO, SET64HI): Macros added.
578 Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com>
580 * configure: Regenerate with autoconf 2.7.
582 Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com>
584 * interp.c (LoadMemory): Enclose text following #endif in /* */.
585 * support.h: Remove superfluous "1" from #if.
586 * support.h (CHECKSIM): Remove stray 'a' at end of line.
588 Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com>
590 * interp.c (StoreFPR): Control UndefinedResult() call on
591 WARN_RESULT manifest.
593 Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk>
595 * gencode.c: Tidied instruction decoding, and added FP instruction
598 * interp.c: Added dineroIII, and BSD profiling support. Also
599 run-time FP handling.
601 Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
603 * Changelog, Makefile.in, README.Cygnus, configure, configure.in,
604 gencode.c, interp.c, support.h: created.