sim/mips/sim-main.h

   1 /* MIPS Simulator definition.
   2    Copyright (C) 1997, 1998 Free Software Foundation, Inc.
   3    Contributed by Cygnus Support.
   4
   5 This file is part of GDB, the GNU debugger.
   6
   7 This program is free software; you can redistribute it and/or modify
   8 it under the terms of the GNU General Public License as published by
   9 the Free Software Foundation; either version 2, or (at your option)
  10 any later version.
  11
  12 This program is distributed in the hope that it will be useful,
  13 but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 GNU General Public License for more details.
  16
  17 You should have received a copy of the GNU General Public License along
  18 with this program; if not, write to the Free Software Foundation, Inc.,
  19 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  20
  21 #ifndef SIM_MAIN_H
  22 #define SIM_MAIN_H
  23
  24 /* This simulator doesn't cache the Current Instruction Address */
  25 /* #define SIM_ENGINE_HALT_HOOK(SD, LAST_CPU, CIA) */
  26 /* #define SIM_ENGINE_RESUME_HOOK(SD, LAST_CPU, CIA) */
  27
  28 #define SIM_HAVE_BIENDIAN
  29
  30
  31 /* hobble some common features for moment */
  32 #define WITH_WATCHPOINTS 1
  33 #define WITH_MODULO_MEMORY 1
  34
  35 #include "sim-basics.h"
  36
  37 typedef address_word sim_cia;
  38
  39 #if (WITH_IGEN)
  40 /* Get the number of instructions.  FIXME: must be a more elegant way
  41    of doing this.  */
  42 #include "itable.h"
  43 #define MAX_INSNS (nr_itable_entries)
  44 #define INSN_NAME(cpu,i) itable[(i)].name
  45 #endif
  46
  47 #include "sim-base.h"
  48
  49
  50 /* Depreciated macros and types for manipulating 64bit values.  Use
  51    ../common/sim-bits.h and ../common/sim-endian.h macros instead. */
  52
  53 typedef signed64 word64;
  54 typedef unsigned64 uword64;
  55
  56 #define WORD64LO(t)     (unsigned int)((t)&0xFFFFFFFF)
  57 #define WORD64HI(t)     (unsigned int)(((uword64)(t))>>32)
  58 #define SET64LO(t)      (((uword64)(t))&0xFFFFFFFF)
  59 #define SET64HI(t)      (((uword64)(t))<<32)
  60 #define WORD64(h,l)     ((word64)((SET64HI(h)|SET64LO(l))))
  61 #define UWORD64(h,l)     (SET64HI(h)|SET64LO(l))
  62
  63 /* Sign-extend the given value (e) as a value (b) bits long. We cannot
  64    assume the HI32bits of the operand are zero, so we must perform a
  65    mask to ensure we can use the simple subtraction to sign-extend. */
  66 #define SIGNEXTEND(e,b) \
  67  ((unsigned_word) \
  68   (((e) & ((uword64) 1 << ((b) - 1))) \
  69    ? (((e) & (((uword64) 1 << (b)) - 1)) - ((uword64)1 << (b))) \
  70    : ((e) & (((((uword64) 1 << ((b) - 1)) - 1) << 1) | 1))))
  71
  72 /* Check if a value will fit within a halfword: */
  73 #define NOTHALFWORDVALUE(v) ((((((uword64)(v)>>16) == 0) && !((v) & ((unsigned)1 << 15))) || (((((uword64)(v)>>32) == 0xFFFFFFFF) && ((((uword64)(v)>>16) & 0xFFFF) == 0xFFFF)) && ((v) & ((unsigned)1 << 15)))) ? (1 == 0) : (1 == 1))
  74
  75
  76
  77 /* Floating-point operations: */
  78
  79 #include "sim-fpu.h"
  80
  81 /* FPU registers must be one of the following types. All other values
  82    are reserved (and undefined). */
  83 typedef enum {
  84  fmt_single  = 0,
  85  fmt_double  = 1,
  86  fmt_word    = 4,
  87  fmt_long    = 5,
  88  /* The following are well outside the normal acceptable format
  89     range, and are used in the register status vector. */
  90  fmt_unknown       = 0x10000000,
  91  fmt_uninterpreted = 0x20000000,
  92  fmt_uninterpreted_32 = 0x40000000,
  93  fmt_uninterpreted_64 = 0x80000000,
  94 } FP_formats;
  95
  96 unsigned64 value_fpr PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int fpr, FP_formats));
  97 #define ValueFPR(FPR,FMT) value_fpr (SD, CPU, cia, (FPR), (FMT))
  98
  99 void store_fpr PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int fpr, FP_formats fmt, unsigned64 value));
 100 #define StoreFPR(FPR,FMT,VALUE) store_fpr (SD, CPU, cia, (FPR), (FMT), (VALUE))
 101
 102 int NaN PARAMS ((unsigned64 op, FP_formats fmt));
 103 int Infinity PARAMS ((unsigned64 op, FP_formats fmt));
 104 int Less PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 105 int Equal PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 106 unsigned64 AbsoluteValue PARAMS ((unsigned64 op, FP_formats fmt));
 107 unsigned64 Negate PARAMS ((unsigned64 op, FP_formats fmt));
 108 unsigned64 Add PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 109 unsigned64 Sub PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 110 unsigned64 Multiply PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 111 unsigned64 Divide PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 112 unsigned64 Recip PARAMS ((unsigned64 op, FP_formats fmt));
 113 unsigned64 SquareRoot PARAMS ((unsigned64 op, FP_formats fmt));
 114 unsigned64 Max PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 115 unsigned64 Min PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));
 116 unsigned64 convert PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int rm, unsigned64 op, FP_formats from, FP_formats to));
 117 #define Convert(rm,op,from,to) \
 118 convert (SD, CPU, cia, rm, op, from, to)
 119
 120 /* Macro to update FPSR condition-code field. This is complicated by
 121    the fact that there is a hole in the index range of the bits within
 122    the FCSR register. Also, the number of bits visible depends on the
 123    MIPS ISA version being supported. */
 124
 125 #define SETFCC(cc,v) {\
 126   int bit = ((cc == 0) ? 23 : (24 + (cc)));\
 127   FCSR = ((FCSR & ~(1 << bit)) | ((v) << bit));\
 128 }
 129 #define GETFCC(cc) (((((cc) == 0) ? (FCSR & (1 << 23)) : (FCSR & (1 << (24 + (cc))))) != 0) ? 1U : 0)
 130
 131 /* This should be the COC1 value at the start of the preceding
 132    instruction: */
 133 #define PREVCOC1() ((STATE & simPCOC1) ? 1 : 0)
 134
 135 #if 1
 136 #define SizeFGR() (WITH_TARGET_FLOATING_POINT_BITSIZE)
 137 #else
 138 /* They depend on the CPU being simulated */
 139 #define SizeFGR() ((WITH_TARGET_WORD_BITSIZE == 64 && ((SR & status_FR) == 1)) ? 64 : 32)
 140 #endif
 141
 142 /* Standard FCRS bits: */
 143 #define IR (0) /* Inexact Result */
 144 #define UF (1) /* UnderFlow */
 145 #define OF (2) /* OverFlow */
 146 #define DZ (3) /* Division by Zero */
 147 #define IO (4) /* Invalid Operation */
 148 #define UO (5) /* Unimplemented Operation */
 149
 150 /* Get masks for individual flags: */
 151 #if 1 /* SAFE version */
 152 #define FP_FLAGS(b)  (((unsigned)(b) < 5) ? (1 << ((b) + 2)) : 0)
 153 #define FP_ENABLE(b) (((unsigned)(b) < 5) ? (1 << ((b) + 7)) : 0)
 154 #define FP_CAUSE(b)  (((unsigned)(b) < 6) ? (1 << ((b) + 12)) : 0)
 155 #else
 156 #define FP_FLAGS(b)  (1 << ((b) + 2))
 157 #define FP_ENABLE(b) (1 << ((b) + 7))
 158 #define FP_CAUSE(b)  (1 << ((b) + 12))
 159 #endif
 160
 161 #define FP_FS         (1 << 24) /* MIPS III onwards : Flush to Zero */
 162
 163 #define FP_MASK_RM    (0x3)
 164 #define FP_SH_RM      (0)
 165 #define FP_RM_NEAREST (0) /* Round to nearest        (Round) */
 166 #define FP_RM_TOZERO  (1) /* Round to zero           (Trunc) */
 167 #define FP_RM_TOPINF  (2) /* Round to Plus infinity  (Ceil) */
 168 #define FP_RM_TOMINF  (3) /* Round to Minus infinity (Floor) */
 169 #define GETRM()       (int)((FCSR >> FP_SH_RM) & FP_MASK_RM)
 170
 171 /* start-sanitize-sky */
 172 #ifdef TARGET_SKY
 173 #ifdef SKY_FUNIT
 174 #include <assert.h>
 175 #include "wf.h"
 176 #endif
 177 #endif
 178 /* end-sanitize-sky */
 179
 180
 181
 182
 183
 184 /* HI/LO register accesses */
 185
 186 /* For some MIPS targets, the HI/LO registers have certain timing
 187    restrictions in that, for instance, a read of a HI register must be
 188    separated by at least three instructions from a preceeding read.
 189
 190    The struct below is used to record the last access by each of A MT,
 191    MF or other OP instruction to a HI/LO register.  See mips.igen for
 192    more details. */
 193
 194 typedef struct _hilo_access {
 195   signed64 timestamp;
 196   address_word cia;
 197 } hilo_access;
 198
 199 typedef struct _hilo_history {
 200   hilo_access mt;
 201   hilo_access mf;
 202   hilo_access op;
 203 } hilo_history;
 204
 205
 206
 207
 208 /* Integer ALU operations: */
 209
 210 #include "sim-alu.h"
 211
 212 #define ALU32_END(ANS) \
 213   if (ALU32_HAD_OVERFLOW) \
 214     SignalExceptionIntegerOverflow (); \
 215   (ANS) = (signed32) ALU32_OVERFLOW_RESULT
 216
 217
 218 #define ALU64_END(ANS) \
 219   if (ALU64_HAD_OVERFLOW) \
 220     SignalExceptionIntegerOverflow (); \
 221   (ANS) = ALU64_OVERFLOW_RESULT;
 222
 223
 224 /* start-sanitize-r5900 */
 225
 226 /* Figure 10-5 FPU Control/Status Register.
 227    Note: some of these bits are different to what is found in a
 228    standard MIPS manual. */
 229 enum {
 230   R5900_FCSR_C = BIT (23), /* OK */
 231   R5900_FCSR_I = BIT (17),
 232   R5900_FCSR_D = BIT (16),
 233   R5900_FCSR_O = BIT (15),
 234   R5900_FCSR_U = BIT (14),
 235   R5900_FCSR_CAUSE = MASK (16,14),
 236   R5900_FCSR_SI = BIT (6),
 237   R5900_FCSR_SD = BIT (5),
 238   R5900_FCSR_SO = BIT (4),
 239   R5900_FCSR_SU = BIT (3),
 240 };
 241
 242 /* Table 10-1 FP format values.
 243    Note: some of these bits are different to what is found in a
 244    standard MIPS manual. */
 245 enum {
 246   R5900_EXPMAX = 128,
 247   R5900_EXPMIN = -127,
 248   R5900_EXPBIAS = 127,
 249 };
 250
 251 /* MAX and MIN FP values */
 252 enum {
 253   R5900_FPMAX = LSMASK32 (30, 0),
 254   R5900_FPMIN = LSMASK32 (31, 0),
 255 };
 256
 257
 258
 259 typedef struct _sim_r5900_cpu {
 260
 261   /* The R5900 has 32 x 128bit general purpose registers.
 262      Fortunatly, the high 64 bits are only touched by multimedia (MMI)
 263      instructions.  The normal mips instructions just use the lower 64
 264      bits.  To avoid changing the older parts of the simulator to
 265      handle this weirdness, the high 64 bits of each register are kept
 266      in a separate array (registers1).  The high 64 bits of any
 267      register are by convention refered by adding a '1' to the end of
 268      the normal register's name.  So LO still refers to the low 64
 269      bits of the LO register, LO1 refers to the high 64 bits of that
 270      same register.  */
 271   signed_word gpr1[32];
 272 #define GPR1     ((CPU)->r5900.gpr1)
 273   signed_word lo1;
 274   signed_word hi1;
 275 #define LO1      ((CPU)->r5900.lo1)
 276 #define HI1      ((CPU)->r5900.hi1)
 277
 278   /* The R5900 defines a shift amount register, that controls the
 279      amount of certain shift instructions */
 280   unsigned_word sa;        /* the shift amount register */
 281 #define REGISTER_SA     (124) /* GET RID IF THIS! */
 282 #define SA ((CPU)->r5900.sa)
 283
 284   /* The R5900, in addition to the (almost) standard floating point
 285      registers, defines a 32 bit accumulator.  This is used in
 286      multiply/accumulate style instructions */
 287   fp_word acc; /* floating-point accumulator */
 288 #define ACC ((CPU)->r5900.acc)
 289
 290   /* See comments below about needing to count cycles between updating
 291      and setting HI/LO registers */
 292   hilo_history hi1_history;
 293 #define HI1HISTORY (&(CPU)->r5900.hi1_history)
 294   hilo_history lo1_history;
 295 #define LO1HISTORY (&(CPU)->r5900.lo1_history)
 296
 297 } sim_r5900_cpu;
 298
 299 #define BYTES_IN_MMI_REGS       (sizeof(signed_word) + sizeof(signed_word))
 300 #define HALFWORDS_IN_MMI_REGS   (BYTES_IN_MMI_REGS/2)
 301 #define WORDS_IN_MMI_REGS       (BYTES_IN_MMI_REGS/4)
 302 #define DOUBLEWORDS_IN_MMI_REGS (BYTES_IN_MMI_REGS/8)
 303
 304 #define BYTES_IN_MIPS_REGS       (sizeof(signed_word))
 305 #define HALFWORDS_IN_MIPS_REGS   (BYTES_IN_MIPS_REGS/2)
 306 #define WORDS_IN_MIPS_REGS       (BYTES_IN_MIPS_REGS/4)
 307 #define DOUBLEWORDS_IN_MIPS_REGS (BYTES_IN_MIPS_REGS/8)
 308
 309 /* SUB_REG_FETCH - return as lvalue some sub-part of a "register"
 310    T  - type of the sub part
 311    TC - # of T's in the mips part of the "register"
 312    I  - index (from 0) of desired sub part
 313    A  - low part of "register"
 314    A1 - high part of register
 315 */
 316 #define SUB_REG_FETCH(T,TC,A,A1,I) \
 317 (*(((I) < (TC) ? (T*)(A) : (T*)(A1)) \
 318    + (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN \
 319       ? ((TC) - 1 - (I) % (TC)) \
 320       : ((I) % (TC)) \
 321       ) \
 322    ) \
 323  )
 324
 325 /*
 326 GPR_<type>(R,I) - return, as lvalue, the I'th <type> of general register R
 327             where <type> has two letters:
 328                   1 is S=signed or U=unsigned
 329                   2 is B=byte H=halfword W=word D=doubleword
 330 */
 331
 332 #define SUB_REG_SB(A,A1,I) SUB_REG_FETCH(signed8,  BYTES_IN_MIPS_REGS,       A, A1, I)
 333 #define SUB_REG_SH(A,A1,I) SUB_REG_FETCH(signed16, HALFWORDS_IN_MIPS_REGS,   A, A1, I)
 334 #define SUB_REG_SW(A,A1,I) SUB_REG_FETCH(signed32, WORDS_IN_MIPS_REGS,       A, A1, I)
 335 #define SUB_REG_SD(A,A1,I) SUB_REG_FETCH(signed64, DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
 336
 337 #define SUB_REG_UB(A,A1,I) SUB_REG_FETCH(unsigned8,  BYTES_IN_MIPS_REGS,       A, A1, I)
 338 #define SUB_REG_UH(A,A1,I) SUB_REG_FETCH(unsigned16, HALFWORDS_IN_MIPS_REGS,   A, A1, I)
 339 #define SUB_REG_UW(A,A1,I) SUB_REG_FETCH(unsigned32, WORDS_IN_MIPS_REGS,       A, A1, I)
 340 #define SUB_REG_UD(A,A1,I) SUB_REG_FETCH(unsigned64, DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
 341
 342 #define GPR_SB(R,I) SUB_REG_SB(&GPR[R], &GPR1[R], I)
 343 #define GPR_SH(R,I) SUB_REG_SH(&GPR[R], &GPR1[R], I)
 344 #define GPR_SW(R,I) SUB_REG_SW(&GPR[R], &GPR1[R], I)
 345 #define GPR_SD(R,I) SUB_REG_SD(&GPR[R], &GPR1[R], I)
 346
 347 #define GPR_UB(R,I) SUB_REG_UB(&GPR[R], &GPR1[R], I)
 348 #define GPR_UH(R,I) SUB_REG_UH(&GPR[R], &GPR1[R], I)
 349 #define GPR_UW(R,I) SUB_REG_UW(&GPR[R], &GPR1[R], I)
 350 #define GPR_UD(R,I) SUB_REG_UD(&GPR[R], &GPR1[R], I)
 351
 352
 353 #define RS_SB(I) SUB_REG_SB(&rs_reg, &rs_reg1, I)
 354 #define RS_SH(I) SUB_REG_SH(&rs_reg, &rs_reg1, I)
 355 #define RS_SW(I) SUB_REG_SW(&rs_reg, &rs_reg1, I)
 356 #define RS_SD(I) SUB_REG_SD(&rs_reg, &rs_reg1, I)
 357
 358 #define RS_UB(I) SUB_REG_UB(&rs_reg, &rs_reg1, I)
 359 #define RS_UH(I) SUB_REG_UH(&rs_reg, &rs_reg1, I)
 360 #define RS_UW(I) SUB_REG_UW(&rs_reg, &rs_reg1, I)
 361 #define RS_UD(I) SUB_REG_UD(&rs_reg, &rs_reg1, I)
 362
 363 #define RT_SB(I) SUB_REG_SB(&rt_reg, &rt_reg1, I)
 364 #define RT_SH(I) SUB_REG_SH(&rt_reg, &rt_reg1, I)
 365 #define RT_SW(I) SUB_REG_SW(&rt_reg, &rt_reg1, I)
 366 #define RT_SD(I) SUB_REG_SD(&rt_reg, &rt_reg1, I)
 367
 368 #define RT_UB(I) SUB_REG_UB(&rt_reg, &rt_reg1, I)
 369 #define RT_UH(I) SUB_REG_UH(&rt_reg, &rt_reg1, I)
 370 #define RT_UW(I) SUB_REG_UW(&rt_reg, &rt_reg1, I)
 371 #define RT_UD(I) SUB_REG_UD(&rt_reg, &rt_reg1, I)
 372
 373
 374
 375 #define LO_SB(I) SUB_REG_SB(&LO, &LO1, I)
 376 #define LO_SH(I) SUB_REG_SH(&LO, &LO1, I)
 377 #define LO_SW(I) SUB_REG_SW(&LO, &LO1, I)
 378 #define LO_SD(I) SUB_REG_SD(&LO, &LO1, I)
 379
 380 #define LO_UB(I) SUB_REG_UB(&LO, &LO1, I)
 381 #define LO_UH(I) SUB_REG_UH(&LO, &LO1, I)
 382 #define LO_UW(I) SUB_REG_UW(&LO, &LO1, I)
 383 #define LO_UD(I) SUB_REG_UD(&LO, &LO1, I)
 384
 385 #define HI_SB(I) SUB_REG_SB(&HI, &HI1, I)
 386 #define HI_SH(I) SUB_REG_SH(&HI, &HI1, I)
 387 #define HI_SW(I) SUB_REG_SW(&HI, &HI1, I)
 388 #define HI_SD(I) SUB_REG_SD(&HI, &HI1, I)
 389
 390 #define HI_UB(I) SUB_REG_UB(&HI, &HI1, I)
 391 #define HI_UH(I) SUB_REG_UH(&HI, &HI1, I)
 392 #define HI_UW(I) SUB_REG_UW(&HI, &HI1, I)
 393 #define HI_UD(I) SUB_REG_UD(&HI, &HI1, I)
 394
 395 /* end-sanitize-r5900 */
 396
 397
 398
 399 /* The following is probably not used for MIPS IV onwards: */
 400 /* Slots for delayed register updates. For the moment we just have a
 401    fixed number of slots (rather than a more generic, dynamic
 402    system). This keeps the simulator fast. However, we only allow
 403    for the register update to be delayed for a single instruction
 404    cycle. */
 405 #define PSLOTS (8) /* Maximum number of instruction cycles */
 406
 407 typedef struct _pending_write_queue {
 408   int in;
 409   int out;
 410   int total;
 411   int slot_delay[PSLOTS];
 412   int slot_size[PSLOTS];
 413   int slot_bit[PSLOTS];
 414   void *slot_dest[PSLOTS];
 415   unsigned64 slot_value[PSLOTS];
 416 } pending_write_queue;
 417
 418 #ifndef PENDING_TRACE
 419 #define PENDING_TRACE 0
 420 #endif
 421 #define PENDING_IN ((CPU)->pending.in)
 422 #define PENDING_OUT ((CPU)->pending.out)
 423 #define PENDING_TOTAL ((CPU)->pending.total)
 424 #define PENDING_SLOT_SIZE ((CPU)->pending.slot_size)
 425 #define PENDING_SLOT_BIT ((CPU)->pending.slot_size)
 426 #define PENDING_SLOT_DELAY ((CPU)->pending.slot_delay)
 427 #define PENDING_SLOT_DEST ((CPU)->pending.slot_dest)
 428 #define PENDING_SLOT_VALUE ((CPU)->pending.slot_value)
 429
 430 /* Invalidate the pending write queue, all pending writes are
 431    discarded. */
 432
 433 #define PENDING_INVALIDATE() \
 434 memset (&(CPU)->pending, 0, sizeof ((CPU)->pending))
 435
 436 /* Schedule a write to DEST for N cycles time.  For 64 bit
 437    destinations, schedule two writes.  For floating point registers,
 438    the caller should schedule a write to both the dest register and
 439    the FPR_STATE register.  When BIT is non-negative, only BIT of DEST
 440    is updated. */
 441
 442 #define PENDING_SCHED(DEST,VAL,DELAY,BIT)                               \
 443   do {                                                                  \
 444     if (PENDING_SLOT_DEST[PENDING_IN] != NULL)                          \
 445       sim_engine_abort (SD, CPU, cia,                                   \
 446                         "PENDING_SCHED - buffer overflow\n");           \
 447     if (PENDING_TRACE)                                                  \
 448       sim_io_printf (SD, "PENDING_SCHED - dest 0x%lx, val 0x%lx, pending_in %d, pending_out %d, pending_total %d\n", (unsigned long) (DEST), (unsigned long) (VAL), PENDING_IN, PENDING_OUT, PENDING_TOTAL); \
 449     PENDING_SLOT_DELAY[PENDING_IN] = (DELAY) + 1;                       \
 450     PENDING_SLOT_DEST[PENDING_IN] = &(DEST);                            \
 451     PENDING_SLOT_VALUE[PENDING_IN] = (VAL);                             \
 452     PENDING_SLOT_SIZE[PENDING_IN] = sizeof (DEST);                      \
 453     PENDING_SLOT_BIT[PENDING_IN] = (BIT);                               \
 454   } while (0)
 455
 456 #define PENDING_WRITE(DEST,VAL,DELAY) PENDING_SCHED(DEST,VAL,DELAY,-1)
 457 #define PENDING_BIT(DEST,VAL,DELAY,BIT) PENDING_SCHED(DEST,VAL,DELAY,BIT)
 458
 459 #define PENDING_TICK() pending_tick (SD, CPU, cia)
 460
 461 #define PENDING_FLUSH() abort () /* think about this one */
 462 #define PENDING_FP() abort () /* think about this one */
 463
 464 /* For backward compatibility */
 465 #define PENDING_FILL(R,VAL)                                             \
 466 {                                                                       \
 467   if ((R) >= FGRIDX && (R) < FGRIDX + NR_FGR)                           \
 468     PENDING_SCHED(FGR[(R) - FGRIDX], VAL, 2, -1);                       \
 469   else                                                                  \
 470     PENDING_SCHED(GPR[(R)], VAL, 2, -1);                                \
 471 }
 472
 473
 474
 475 struct _sim_cpu {
 476
 477
 478   /* The following are internal simulator state variables: */
 479 #define CIA_GET(CPU) ((CPU)->registers[PCIDX] + 0)
 480 #define CIA_SET(CPU,CIA) ((CPU)->registers[PCIDX] = (CIA))
 481   address_word dspc;  /* delay-slot PC */
 482 #define DSPC ((CPU)->dspc)
 483
 484 #if !WITH_IGEN
 485   /* Issue a delay slot instruction immediatly by re-calling
 486      idecode_issue */
 487 #define DELAY_SLOT(TARGET) \
 488   do { \
 489     address_word target = (TARGET); \
 490     instruction_word delay_insn; \
 491     sim_events_slip (SD, 1); \
 492     CIA = CIA + 4; /* NOTE not mips16 */ \
 493     STATE |= simDELAYSLOT; \
 494     delay_insn = IMEM32 (CIA); /* NOTE not mips16 */ \
 495     idecode_issue (CPU_, delay_insn, (CIA)); \
 496     STATE &= ~simDELAYSLOT; \
 497     NIA = target; \
 498   } while (0)
 499 #define NULLIFY_NEXT_INSTRUCTION() \
 500   do { \
 501     sim_events_slip (SD, 1); \
 502     dotrace (SD, CPU, tracefh, 2, NIA, 4, "load instruction"); \
 503     NIA = CIA + 8; \
 504   } while (0)
 505 #else
 506 #define DELAY_SLOT(TARGET) NIA = delayslot32 (SD_, (TARGET))
 507 #define NULLIFY_NEXT_INSTRUCTION() NIA = nullify_next_insn32 (SD_)
 508 #endif
 509
 510
 511   /* State of the simulator */
 512   unsigned int state;
 513   unsigned int dsstate;
 514 #define STATE ((CPU)->state)
 515 #define DSSTATE ((CPU)->dsstate)
 516
 517 /* Flags in the "state" variable: */
 518 #define simHALTEX       (1 << 2)  /* 0 = run; 1 = halt on exception */
 519 #define simHALTIN       (1 << 3)  /* 0 = run; 1 = halt on interrupt */
 520 #define simTRACE        (1 << 8)  /* 0 = do nothing; 1 = trace address activity */
 521 #define simPCOC0        (1 << 17) /* COC[1] from current */
 522 #define simPCOC1        (1 << 18) /* COC[1] from previous */
 523 #define simDELAYSLOT    (1 << 24) /* 0 = do nothing; 1 = delay slot entry exists */
 524 #define simSKIPNEXT     (1 << 25) /* 0 = do nothing; 1 = skip instruction */
 525 #define simSIGINT       (1 << 28)  /* 0 = do nothing; 1 = SIGINT has occured */
 526 #define simJALDELAYSLOT (1 << 29) /* 1 = in jal delay slot */
 527
 528 #define ENGINE_ISSUE_PREFIX_HOOK() \
 529   { \
 530     /* Perform any pending writes */ \
 531     PENDING_TICK(); \
 532     /* Set previous flag, depending on current: */ \
 533     if (STATE & simPCOC0) \
 534      STATE |= simPCOC1; \
 535     else \
 536      STATE &= ~simPCOC1; \
 537     /* and update the current value: */ \
 538     if (GETFCC(0)) \
 539      STATE |= simPCOC0; \
 540     else \
 541      STATE &= ~simPCOC0; \
 542   }
 543
 544
 545 /* This is nasty, since we have to rely on matching the register
 546    numbers used by GDB. Unfortunately, depending on the MIPS target
 547    GDB uses different register numbers. We cannot just include the
 548    relevant "gdb/tm.h" link, since GDB may not be configured before
 549    the sim world, and also the GDB header file requires too much other
 550    state. */
 551
 552 #ifndef TM_MIPS_H
 553 #define LAST_EMBED_REGNUM (89)
 554 #define NUM_REGS (LAST_EMBED_REGNUM + 1)
 555 /* start-sanitize-r5900 */
 556 #undef NUM_REGS
 557 #define NUM_REGS (128)
 558 /* end-sanitize-r5900 */
 559 #endif
 560
 561 /* start-sanitize-sky */
 562 #ifdef TARGET_SKY
 563 #ifndef TM_TXVU_H
 564 /* Number of machine registers */
 565 #define NUM_VU_REGS     153
 566 #define NUM_VU_INTEGER_REGS 16
 567
 568 #define NUM_VIF_REGS    26
 569
 570 #define FIRST_VEC_REG   25
 571 #define NUM_R5900_REGS  128
 572
 573 #undef NUM_REGS
 574 #define NUM_REGS (NUM_R5900_REGS + 2*(NUM_VU_REGS) + 2*(NUM_VIF_REGS))
 575 #endif /* no tm-txvu.h */
 576 #endif /* TARGET_SKY */
 577 /* end-sanitize-sky */
 578
 579 enum float_operation
 580 /* start-sanitize-sky */
 581 /* NOTE: THE VALUES of THESE CONSTANTS MUST BE IN SYNC WITH THOSE IN WF.H */
 582 /* end-sanitize-sky */
 583   {
 584     FLOP_ADD,    FLOP_SUB,    FLOP_MUL,    FLOP_MADD,
 585     FLOP_MSUB,   FLOP_MAX=10, FLOP_MIN,    FLOP_ABS,
 586     FLOP_ITOF0=14, FLOP_FTOI0=18, FLOP_NEG=23
 587   };
 588
 589 /* To keep this default simulator simple, and fast, we use a direct
 590    vector of registers. The internal simulator engine then uses
 591    manifests to access the correct slot. */
 592
 593   unsigned_word registers[LAST_EMBED_REGNUM + 1];
 594   int register_widths[NUM_REGS];
 595 #define REGISTERS       ((CPU)->registers)
 596
 597 #define GPR     (&REGISTERS[0])
 598 #define GPR_SET(N,VAL) (REGISTERS[(N)] = (VAL))
 599
 600   /* While space is allocated for the floating point registers in the
 601      main registers array, they are stored separatly.  This is because
 602      their size may not necessarily match the size of either the
 603      general-purpose or system specific registers */
 604 #define NR_FGR  (32)
 605 #define FGRIDX  (38)
 606   fp_word fgr[NR_FGR];
 607 #define FGR     ((CPU)->fgr)
 608
 609 #define LO      (REGISTERS[33])
 610 #define HI      (REGISTERS[34])
 611 #define PCIDX   37
 612 #define PC      (REGISTERS[PCIDX])
 613 #define CAUSE   (REGISTERS[36])
 614 #define SRIDX   (32)
 615 #define SR      (REGISTERS[SRIDX])      /* CPU status register */
 616 #define FCR0IDX  (71)
 617 #define FCR0    (REGISTERS[FCR0IDX])    /* really a 32bit register */
 618 #define FCR31IDX (70)
 619 #define FCR31   (REGISTERS[FCR31IDX])   /* really a 32bit register */
 620 #define FCSR    (FCR31)
 621 #define Debug   (REGISTERS[86])
 622 #define DEPC    (REGISTERS[87])
 623 #define EPC     (REGISTERS[88])
 624 #define COCIDX  (LAST_EMBED_REGNUM + 2) /* special case : outside the normal range */
 625
 626   unsigned_word c0_config_reg;
 627 #define C0_CONFIG ((CPU)->c0_config_reg)
 628
 629 /* The following are pseudonyms for standard registers */
 630 #define ZERO    (REGISTERS[0])
 631 #define V0      (REGISTERS[2])
 632 #define A0      (REGISTERS[4])
 633 #define A1      (REGISTERS[5])
 634 #define A2      (REGISTERS[6])
 635 #define A3      (REGISTERS[7])
 636 #define T8IDX   24
 637 #define T8      (REGISTERS[T8IDX])
 638 #define SPIDX   29
 639 #define SP      (REGISTERS[SPIDX])
 640 #define RAIDX   31
 641 #define RA      (REGISTERS[RAIDX])
 642
 643   /* Keep the current format state for each register: */
 644   FP_formats fpr_state[32];
 645 #define FPR_STATE ((CPU)->fpr_state)
 646
 647   pending_write_queue pending;
 648
 649   /* LLBIT = Load-Linked bit. A bit of "virtual" state used by atomic
 650      read-write instructions. It is set when a linked load occurs. It
 651      is tested and cleared by the conditional store. It is cleared
 652      (during other CPU operations) when a store to the location would
 653      no longer be atomic. In particular, it is cleared by exception
 654      return instructions. */
 655   int llbit;
 656 #define LLBIT ((CPU)->llbit)
 657
 658
 659 /* The HIHISTORY and LOHISTORY timestamps are used to ensure that
 660    corruptions caused by using the HI or LO register too close to a
 661    following operation is spotted. See mips.igen for more details. */
 662
 663   hilo_history hi_history;
 664 #define HIHISTORY (&(CPU)->hi_history)
 665   hilo_history lo_history;
 666 #define LOHISTORY (&(CPU)->lo_history)
 667
 668   /* start-sanitize-r5900 */
 669   sim_r5900_cpu r5900;
 670
 671   /* end-sanitize-r5900 */
 672   /* start-sanitize-vr5400 */
 673
 674   /* The MDMX ISA has a very very large accumulator */
 675   unsigned8 acc[3 * 8];
 676   /* end-sanitize-vr5400 */
 677   /* start-sanitize-sky */
 678
 679 #ifdef TARGET_SKY
 680   /* Device on which instruction issue last occured.  */
 681   char cur_device;
 682 #endif
 683   /* end-sanitize-sky */
 684   sim_cpu_base base;
 685 };
 686
 687
 688 /* MIPS specific simulator watch config */
 689
 690 void watch_options_install PARAMS ((SIM_DESC sd));
 691
 692 struct swatch {
 693   sim_event *pc;
 694   sim_event *clock;
 695   sim_event *cycles;
 696 };
 697
 698
 699 /* FIXME: At present much of the simulator is still static */
 700 struct sim_state {
 701
 702   struct swatch watch;
 703
 704   sim_cpu cpu[MAX_NR_PROCESSORS];
 705 #if (WITH_SMP)
 706 #define STATE_CPU(sd,n) (&(sd)->cpu[n])
 707 #else
 708 #define STATE_CPU(sd,n) (&(sd)->cpu[0])
 709 #endif
 710
 711 /* start-sanitize-sky */
 712 #ifdef TARGET_SKY
 713 #ifdef SKY_FUNIT
 714   /* Record of option for floating point implementation type. */
 715   int fp_type_opt;
 716 #define STATE_FP_TYPE_OPT(sd) ((sd)->fp_type_opt)
 717 #define STATE_FP_TYPE_OPT_ACCURATE 0x80000000
 718 #endif
 719 #endif
 720 /* end-sanitize-sky */
 721
 722   sim_state_base base;
 723 };
 724
 725
 726
 727 /* Status information: */
 728
 729 /* TODO : these should be the bitmasks for these bits within the
 730    status register. At the moment the following are VR4300
 731    bit-positions: */
 732 #define status_KSU_mask  (0x3)          /* mask for KSU bits */
 733 #define status_KSU_shift (3)            /* shift for field */
 734 #define ksu_kernel       (0x0)
 735 #define ksu_supervisor   (0x1)
 736 #define ksu_user         (0x2)
 737 #define ksu_unknown      (0x3)
 738
 739 #define status_IE        (1 <<  0)      /* Interrupt enable */
 740 #define status_EXL       (1 <<  1)      /* Exception level */
 741 #define status_RE        (1 << 25)      /* Reverse Endian in user mode */
 742 #define status_FR        (1 << 26)      /* enables MIPS III additional FP registers */
 743 #define status_SR        (1 << 20)      /* soft reset or NMI */
 744 #define status_BEV       (1 << 22)      /* Location of general exception vectors */
 745 #define status_TS        (1 << 21)      /* TLB shutdown has occurred */
 746 #define status_ERL       (1 <<  2)      /* Error level */
 747 #define status_RP        (1 << 27)      /* Reduced Power mode */
 748 /* start-sanitize-r5900 */
 749 #define status_CU0       (1 << 28)      /* COP0 usable */
 750 #define status_CU1       (1 << 29)      /* COP1 usable */
 751 #define status_CU2       (1 << 30)      /* COP2 usable */
 752 /* end-sanitize-r5900 */
 753
 754 /* Specializations for TX39 family */
 755 #define status_IEc       (1 << 0)       /* Interrupt enable (current) */
 756 #define status_KUc       (1 << 1)       /* Kernel/User mode */
 757 #define status_IEp       (1 << 2)       /* Interrupt enable (previous) */
 758 #define status_KUp       (1 << 3)       /* Kernel/User mode */
 759 #define status_IEo       (1 << 4)       /* Interrupt enable (old) */
 760 #define status_KUo       (1 << 5)       /* Kernel/User mode */
 761 #define status_IM_mask   (0xff)         /* Interrupt mask */
 762 #define status_IM_shift  (8)
 763 #define status_NMI       (1 << 20)      /* NMI */
 764 #define status_NMI       (1 << 20)      /* NMI */
 765
 766 #define cause_EXC_mask  (0x1f)          /* Exception code */
 767 #define cause_EXC_shift (2)
 768 #define cause_SW0       (1 << 8)        /* Software interrupt 0 */
 769 #define cause_SW1       (1 << 9)        /* Software interrupt 1 */
 770 #define cause_IP_mask   (0x3f)          /* Interrupt pending field */
 771 #define cause_IP_shift  (10)
 772 #define cause_CE_mask   (0x3)           /* Coprocessor error */
 773 #define cause_CE_shift  (28)
 774
 775 #define cause_BD  ((unsigned)1 << 31)   /* Exception in branch delay slot */
 776
 777
 778 /* NOTE: We keep the following status flags as bit values (1 for true,
 779    0 for false). This allows them to be used in binary boolean
 780    operations without worrying about what exactly the non-zero true
 781    value is. */
 782
 783 /* UserMode */
 784 #ifdef SUBTARGET_R3900
 785 #define UserMode        ((SR & status_KUc) ? 1 : 0)
 786 #else
 787 #define UserMode        ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0)
 788 #endif /* SUBTARGET_R3900 */
 789
 790 /* BigEndianMem */
 791 /* Hardware configuration. Affects endianness of LoadMemory and
 792    StoreMemory and the endianness of Kernel and Supervisor mode
 793    execution. The value is 0 for little-endian; 1 for big-endian. */
 794 #define BigEndianMem    (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)
 795 /*(state & simBE) ? 1 : 0)*/
 796
 797 /* ReverseEndian */
 798 /* This mode is selected if in User mode with the RE bit being set in
 799    SR (Status Register). It reverses the endianness of load and store
 800    instructions. */
 801 #define ReverseEndian   (((SR & status_RE) && UserMode) ? 1 : 0)
 802
 803 /* BigEndianCPU */
 804 /* The endianness for load and store instructions (0=little;1=big). In
 805    User mode this endianness may be switched by setting the state_RE
 806    bit in the SR register. Thus, BigEndianCPU may be computed as
 807    (BigEndianMem EOR ReverseEndian). */
 808 #define BigEndianCPU    (BigEndianMem ^ ReverseEndian) /* Already bits */
 809
 810
 811
 812 /* Exceptions: */
 813
 814 /* NOTE: These numbers depend on the processor architecture being
 815    simulated: */
 816 #define Interrupt               (0)
 817 #define TLBModification         (1)
 818 #define TLBLoad                 (2)
 819 #define TLBStore                (3)
 820 #define AddressLoad             (4)
 821 #define AddressStore            (5)
 822 #define InstructionFetch        (6)
 823 #define DataReference           (7)
 824 #define SystemCall              (8)
 825 #define BreakPoint              (9)
 826 #define ReservedInstruction     (10)
 827 #define CoProcessorUnusable     (11)
 828 #define IntegerOverflow         (12)    /* Arithmetic overflow (IDT monitor raises SIGFPE) */
 829 #define Trap                    (13)
 830 #define FPE                     (15)
 831 #define DebugBreakPoint         (16)
 832 #define Watch                   (23)
 833 #define NMIReset                (31)
 834
 835
 836 /* The following exception code is actually private to the simulator
 837    world. It is *NOT* a processor feature, and is used to signal
 838    run-time errors in the simulator. */
 839 #define SimulatorFault      (0xFFFFFFFF)
 840
 841 /* The following break instructions are reserved for use by the
 842    simulator.  The first is used to halt the simulation.  The second
 843    is used by gdb for break-points.  NOTE: Care must be taken, since
 844    this value may be used in later revisions of the MIPS ISA. */
 845 #define HALT_INSTRUCTION_MASK  (0x03FFFFC0)
 846
 847 #define HALT_INSTRUCTION       (0x03ff000d)
 848 #define HALT_INSTRUCTION2      (0x0000ffcd)
 849
 850 /* start-sanitize-sky */
 851 #define HALT_INSTRUCTION_PASS    (0x03fffc0d)
 852 #define HALT_INSTRUCTION_FAIL    (0x03ffffcd)
 853 /* end-sanitize-sky */
 854
 855 #define BREAKPOINT_INSTRUCTION  (0x0005000d)
 856 #define BREAKPOINT_INSTRUCTION2 (0x0000014d)
 857
 858
 859 void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exception, ...);
 860 #define SignalException(exc,instruction)     signal_exception (SD, CPU, cia, (exc), (instruction))
 861 #define SignalExceptionInterrupt()           signal_exception (SD, CPU, cia, Interrupt)
 862 #define SignalExceptionInstructionFetch()    signal_exception (SD, CPU, cia, InstructionFetch)
 863 #define SignalExceptionAddressStore()        signal_exception (SD, CPU, cia, AddressStore)
 864 #define SignalExceptionAddressLoad()         signal_exception (SD, CPU, cia, AddressLoad)
 865 #define SignalExceptionSimulatorFault(buf)   signal_exception (SD, CPU, cia, SimulatorFault, buf)
 866 #define SignalExceptionFPE()                 signal_exception (SD, CPU, cia, FPE)
 867 #define SignalExceptionIntegerOverflow()     signal_exception (SD, CPU, cia, IntegerOverflow)
 868 #define SignalExceptionCoProcessorUnusable() signal_exception (SD, CPU, cia, CoProcessorUnusable)
 869 #define SignalExceptionNMIReset()            signal_exception (SD, CPU, cia, NMIReset)
 870
 871 /* Co-processor accesses */
 872
 873 void cop_lw  PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, unsigned int memword));
 874 void cop_ld  PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, uword64 memword));
 875 unsigned int cop_sw PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg));
 876 uword64 cop_sd PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg));
 877
 878 #define COP_LW(coproc_num,coproc_reg,memword) \
 879 cop_lw (SD, CPU, cia, coproc_num, coproc_reg, memword)
 880 #define COP_LD(coproc_num,coproc_reg,memword) \
 881 cop_ld (SD, CPU, cia, coproc_num, coproc_reg, memword)
 882 #define COP_SW(coproc_num,coproc_reg) \
 883 cop_sw (SD, CPU, cia, coproc_num, coproc_reg)
 884 #define COP_SD(coproc_num,coproc_reg) \
 885 cop_sd (SD, CPU, cia, coproc_num, coproc_reg)
 886
 887 /* start-sanitize-sky */
 888 #ifdef TARGET_SKY
 889 void cop_lq  PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia,
 890                       int coproc_num, int coproc_reg, unsigned128 memword));
 891 unsigned128 cop_sq PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia,
 892                             int coproc_num, int coproc_reg));
 893 #define COP_LQ(coproc_num,coproc_reg,memword) \
 894 cop_lq (SD, CPU, cia, coproc_num, coproc_reg, memword)
 895 #define COP_SQ(coproc_num,coproc_reg) \
 896 cop_sq (SD, CPU, cia, coproc_num, coproc_reg)
 897 #endif /* TARGET_SKY */
 898 /* end-sanitize-sky */
 899
 900 void decode_coproc PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int instruction));
 901 #define DecodeCoproc(instruction) \
 902 decode_coproc (SD, CPU, cia, (instruction))
 903
 904
 905
 906 /* Memory accesses */
 907
 908 /* The following are generic to all versions of the MIPS architecture
 909    to date: */
 910
 911 /* Memory Access Types (for CCA): */
 912 #define Uncached                (0)
 913 #define CachedNoncoherent       (1)
 914 #define CachedCoherent          (2)
 915 #define Cached                  (3)
 916
 917 #define isINSTRUCTION   (1 == 0) /* FALSE */
 918 #define isDATA          (1 == 1) /* TRUE */
 919 #define isLOAD          (1 == 0) /* FALSE */
 920 #define isSTORE         (1 == 1) /* TRUE */
 921 #define isREAL          (1 == 0) /* FALSE */
 922 #define isRAW           (1 == 1) /* TRUE */
 923 /* The parameter HOST (isTARGET / isHOST) is ignored */
 924 #define isTARGET        (1 == 0) /* FALSE */
 925 /* #define isHOST          (1 == 1) TRUE */
 926
 927 /* The "AccessLength" specifications for Loads and Stores. NOTE: This
 928    is the number of bytes minus 1. */
 929 #define AccessLength_BYTE       (0)
 930 #define AccessLength_HALFWORD   (1)
 931 #define AccessLength_TRIPLEBYTE (2)
 932 #define AccessLength_WORD       (3)
 933 #define AccessLength_QUINTIBYTE (4)
 934 #define AccessLength_SEXTIBYTE  (5)
 935 #define AccessLength_SEPTIBYTE  (6)
 936 #define AccessLength_DOUBLEWORD (7)
 937 #define AccessLength_QUADWORD   (15)
 938
 939 #if (WITH_IGEN)
 940 #define LOADDRMASK (WITH_TARGET_WORD_BITSIZE == 64 \
 941                     ? AccessLength_DOUBLEWORD /*7*/ \
 942                     : AccessLength_WORD /*3*/)
 943 #define PSIZE (WITH_TARGET_ADDRESS_BITSIZE)
 944 #endif
 945
 946
 947 INLINE_SIM_MAIN (int) address_translation PARAMS ((SIM_DESC sd, sim_cpu *, address_word cia, address_word vAddr, int IorD, int LorS, address_word *pAddr, int *CCA, int raw));
 948 #define AddressTranslation(vAddr,IorD,LorS,pAddr,CCA,host,raw) \
 949 address_translation (SD, CPU, cia, vAddr, IorD, LorS, pAddr, CCA, raw)
 950
 951 INLINE_SIM_MAIN (void) load_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, uword64* memvalp, uword64* memval1p, int CCA, unsigned int AccessLength, address_word pAddr, address_word vAddr, int IorD));
 952 #define LoadMemory(memvalp,memval1p,CCA,AccessLength,pAddr,vAddr,IorD,raw) \
 953 load_memory (SD, CPU, cia, memvalp, memval1p, CCA, AccessLength, pAddr, vAddr, IorD)
 954
 955 INLINE_SIM_MAIN (void) store_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int CCA, unsigned int AccessLength, uword64 MemElem, uword64 MemElem1, address_word pAddr, address_word vAddr));
 956 #define StoreMemory(CCA,AccessLength,MemElem,MemElem1,pAddr,vAddr,raw) \
 957 store_memory (SD, CPU, cia, CCA, AccessLength, MemElem, MemElem1, pAddr, vAddr)
 958
 959 INLINE_SIM_MAIN (void) cache_op PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int op, address_word pAddr, address_word vAddr, unsigned int instruction));
 960 #define CacheOp(op,pAddr,vAddr,instruction) \
 961 cache_op (SD, CPU, cia, op, pAddr, vAddr, instruction)
 962
 963 INLINE_SIM_MAIN (void) sync_operation PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int stype));
 964 #define SyncOperation(stype) \
 965 sync_operation (SD, CPU, cia, (stype))
 966
 967 INLINE_SIM_MAIN (void) prefetch PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int CCA, address_word pAddr, address_word vAddr, int DATA, int hint));
 968 #define Prefetch(CCA,pAddr,vAddr,DATA,hint) \
 969 prefetch (SD, CPU, cia, CCA, pAddr, vAddr, DATA, hint)
 970
 971 INLINE_SIM_MAIN (unsigned32) ifetch32 PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, address_word vaddr));
 972 #define IMEM32(CIA) ifetch32 (SD, CPU, (CIA), (CIA))
 973 INLINE_SIM_MAIN (unsigned16) ifetch16 PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, address_word vaddr));
 974 #define IMEM16(CIA) ifetch16 (SD, CPU, (CIA), ((CIA) & ~1))
 975 #define IMEM16_IMMED(CIA,NR) ifetch16 (SD, CPU, (CIA), ((CIA) & ~1) + 2 * (NR))
 976
 977 void dotrace PARAMS ((SIM_DESC sd, sim_cpu *cpu, FILE *tracefh, int type, SIM_ADDR address, int width, char *comment, ...));
 978 FILE *tracefh;
 979
 980 INLINE_SIM_MAIN (void) pending_tick PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia));
 981
 982 char* pr_addr PARAMS ((SIM_ADDR addr));
 983 char* pr_uword64 PARAMS ((uword64 addr));
 984
 985 /* start-sanitize-sky */
 986 #ifdef TARGET_SKY
 987 #ifdef SIM_ENGINE_HALT_HOOK
 988 #undef SIM_ENGINE_HALT_HOOK
 989 #endif
 990
 991 void sky_sim_engine_halt PARAMS ((SIM_DESC sd, sim_cpu *last, sim_cia cia));
 992 #define SIM_ENGINE_HALT_HOOK(sd, last, cia) sky_sim_engine_halt(sd, last, cia);
 993
 994 #ifdef SIM_ENGINE_RESTART_HOOK
 995 #undef SIM_ENGINE_RESTART_HOOK
 996 #endif
 997
 998 void sky_sim_engine_restart PARAMS ((SIM_DESC sd, sim_cpu *last, sim_cia cia));
 999 #define SIM_ENGINE_RESTART_HOOK(sd, L, pc) sky_sim_engine_restart(sd, L, pc);
1000
1001 #ifndef TM_TXVU_H /* In case GDB hasn't been configured yet */
1002 enum txvu_cpu_context
1003 {
1004   TXVU_CPU_AUTO         = -1,   /* context-sensitive context */
1005   TXVU_CPU_MASTER       = 0,    /* R5900 core */
1006   TXVU_CPU_VU0          = 1,    /* Vector units */
1007   TXVU_CPU_VU1          = 2,
1008   TXVU_CPU_VIF0         = 3,    /* FIFO's */
1009   TXVU_CPU_VIF1         = 4,
1010   TXVU_CPU_LAST                 /* Count of context types */
1011 };
1012
1013 /* memory segment for communication with GDB */
1014 #define GDB_COMM_AREA   0x21010000
1015 #define GDB_COMM_SIZE   0x4000
1016
1017 /* Memory address containing last device to execute */
1018 #define LAST_DEVICE     GDB_COMM_AREA
1019
1020 /* The FIFO breakpoint count and table */
1021 #define FIFO_BPT_CNT    (GDB_COMM_AREA + 4)
1022 #define FIFO_BPT_TBL    (GDB_COMM_AREA + 8)
1023
1024 #define TXVU_VU_BRK_MASK 0x02   /* Breakpoint bit is #57 for VU insns */
1025 #define TXVU_VIF_BRK_MASK 0x0f  /* Breakpoint opcode for VIF insns */
1026
1027 #endif /* !TM_TXVU_H */
1028 #endif /* TARGET_SKY */
1029 /* end-sanitize-sky */
1030
1031 #if H_REVEALS_MODULE_P (SIM_MAIN_INLINE)
1032 #include "sim-main.c"
1033 #endif
1034
1035 #endif