5 #include "mn10300_sim.h"
7 host_callback
*mn10300_callback
;
9 static SIM_OPEN_KIND sim_kind
;
12 static void dispatch
PARAMS ((uint32
, uint32
, int));
13 static long hash
PARAMS ((long));
14 static void init_system
PARAMS ((void));
19 struct hash_entry
*next
;
28 static int max_mem
= 0;
29 struct hash_entry hash_table
[MAX_HASH
+1];
32 /* This probably doesn't do a very good job at bucket filling, but
38 /* These are one byte insns, we special case these since, in theory,
39 they should be the most heavily used. */
40 if ((insn
& 0xffffff00) == 0)
85 /* These are two byte insns */
86 if ((insn
& 0xffff0000) == 0)
88 if ((insn
& 0xf000) == 0x2000
89 || (insn
& 0xf000) == 0x5000)
90 return ((insn
& 0xfc00) >> 8) & 0x7f;
92 if ((insn
& 0xf000) == 0x4000)
93 return ((insn
& 0xf300) >> 8) & 0x7f;
95 if ((insn
& 0xf000) == 0x8000
96 || (insn
& 0xf000) == 0x9000
97 || (insn
& 0xf000) == 0xa000
98 || (insn
& 0xf000) == 0xb000)
99 return ((insn
& 0xf000) >> 8) & 0x7f;
101 if ((insn
& 0xff00) == 0xf000
102 || (insn
& 0xff00) == 0xf100
103 || (insn
& 0xff00) == 0xf200
104 || (insn
& 0xff00) == 0xf500
105 || (insn
& 0xff00) == 0xf600)
106 return ((insn
& 0xfff0) >> 4) & 0x7f;
108 if ((insn
& 0xf000) == 0xc000)
109 return ((insn
& 0xff00) >> 8) & 0x7f;
111 return ((insn
& 0xffc0) >> 6) & 0x7f;
114 /* These are three byte insns. */
115 if ((insn
& 0xff000000) == 0)
117 if ((insn
& 0xf00000) == 0x000000)
118 return ((insn
& 0xf30000) >> 16) & 0x7f;
120 if ((insn
& 0xf00000) == 0x200000
121 || (insn
& 0xf00000) == 0x300000)
122 return ((insn
& 0xfc0000) >> 16) & 0x7f;
124 if ((insn
& 0xff0000) == 0xf80000)
125 return ((insn
& 0xfff000) >> 12) & 0x7f;
127 if ((insn
& 0xff0000) == 0xf90000)
128 return ((insn
& 0xfffc00) >> 10) & 0x7f;
130 return ((insn
& 0xff0000) >> 16) & 0x7f;
133 /* These are four byte or larger insns. */
134 if ((insn
& 0xf0000000) == 0xf0000000)
135 return ((insn
& 0xfff00000) >> 20) & 0x7f;
137 return ((insn
& 0xff000000) >> 24) & 0x7f;
141 dispatch (insn
, extension
, length
)
146 struct hash_entry
*h
;
148 h
= &hash_table
[hash(insn
)];
150 while ((insn
& h
->mask
) != h
->opcode
151 || (length
!= h
->ops
->length
))
155 (*mn10300_callback
->printf_filtered
) (mn10300_callback
,
156 "ERROR looking up hash for 0x%x, PC=0x%x\n", insn
, PC
);
167 /* Now call the right function. */
168 (h
->ops
->func
)(insn
, extension
);
172 /* FIXME These would more efficient to use than load_mem/store_mem,
173 but need to be changed to use the memory map. */
187 return (a
[1] << 8) + (a
[0]);
195 return (a
[3]<<24) + (a
[2]<<16) + (a
[1]<<8) + (a
[0]);
199 put_byte (addr
, data
)
208 put_half (addr
, data
)
214 a
[1] = (data
>> 8) & 0xff;
218 put_word (addr
, data
)
224 a
[1] = (data
>> 8) & 0xff;
225 a
[2] = (data
>> 16) & 0xff;
226 a
[3] = (data
>> 24) & 0xff;
237 max_mem
= 1 << power
;
238 State
.mem
= (uint8
*) calloc (1, 1 << power
);
241 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "Allocation of main memory failed.\n");
254 sim_write (sd
, addr
, buffer
, size
)
257 unsigned char *buffer
;
264 for (i
= 0; i
< size
; i
++)
265 store_byte (addr
+ i
, buffer
[i
]);
270 /* Compare two opcode table entries for qsort. */
272 compare_simops (arg1
, arg2
)
276 unsigned long code1
= ((struct simops
*)arg1
)->opcode
;
277 unsigned long code2
= ((struct simops
*)arg2
)->opcode
;
287 sim_open (kind
,cb
,argv
)
293 struct hash_entry
*h
;
297 mn10300_callback
= cb
;
299 /* Sort the opcode array from smallest opcode to largest.
300 This will generally improve simulator performance as the smaller
301 opcodes are generally preferred to the larger opcodes. */
302 for (i
= 0, s
= Simops
; s
->func
; s
++, i
++)
304 qsort (Simops
, i
, sizeof (Simops
[0]), compare_simops
);
309 for (p
= argv
+ 1; *p
; ++p
)
311 if (strcmp (*p
, "-E") == 0)
312 ++p
; /* ignore endian spec */
315 if (strcmp (*p
, "-t") == 0)
316 mn10300_debug
= DEBUG
;
319 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "ERROR: unsupported option(s): %s\n",*p
);
322 /* put all the opcodes in the hash table */
323 for (s
= Simops
; s
->func
; s
++)
325 h
= &hash_table
[hash(s
->opcode
)];
327 /* go to the last entry in the chain */
330 /* Don't insert the same opcode more than once. */
331 if (h
->opcode
== s
->opcode
332 && h
->mask
== s
->mask
339 /* Don't insert the same opcode more than once. */
340 if (h
->opcode
== s
->opcode
341 && h
->mask
== s
->mask
347 h
->next
= calloc(1,sizeof(struct hash_entry
));
352 h
->opcode
= s
->opcode
;
359 /* fudge our descriptor for now */
365 sim_close (sd
, quitting
)
376 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "sim_set_profile %d\n", n
);
380 sim_set_profile_size (n
)
383 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "sim_set_profile_size %d\n", n
);
394 sim_resume (sd
, step
, siggnal
)
400 struct hash_entry
*h
;
403 State
.exception
= SIGTRAP
;
409 unsigned long insn
, extension
;
411 /* Fetch the current instruction. */
412 inst
= load_mem_big (PC
, 2);
415 /* Using a giant case statement may seem like a waste because of the
416 code/rodata size the table itself will consume. However, using
417 a giant case statement speeds up the simulator by 10-15% by avoiding
418 cascading if/else statements or cascading case statements. */
420 switch ((inst
>> 8) & 0xff)
422 /* All the single byte insns except 0x80, 0x90, 0xa0, 0xb0
423 which must be handled specially. */
525 insn
= (inst
>> 8) & 0xff;
527 dispatch (insn
, extension
, 1);
530 /* Special cases where dm == dn is used to encode a different
550 dispatch (insn
, extension
, 2);
601 insn
= (inst
>> 8) & 0xff;
603 dispatch (insn
, extension
, 1);
606 /* The two byte instructions. */
653 dispatch (insn
, extension
, 2);
656 /* The three byte insns with a 16bit operand in little endian
691 insn
= load_byte (PC
);
693 insn
|= load_half (PC
+ 1);
695 dispatch (insn
, extension
, 3);
698 /* The three byte insns without 16bit operand. */
703 insn
= load_mem_big (PC
, 3);
705 dispatch (insn
, extension
, 3);
708 /* Four byte insns. */
711 if ((inst
& 0xfffc) == 0xfaf0
712 || (inst
& 0xfffc) == 0xfaf4
713 || (inst
& 0xfffc) == 0xfaf8)
714 insn
= load_mem_big (PC
, 4);
719 insn
|= load_half (PC
+ 2);
722 dispatch (insn
, extension
, 4);
725 /* Five byte insns. */
727 insn
= load_byte (PC
);
729 insn
|= (load_half (PC
+ 1) << 8);
730 insn
|= load_byte (PC
+ 3);
731 extension
= load_byte (PC
+ 4);
732 dispatch (insn
, extension
, 5);
736 insn
= load_byte (PC
);
738 extension
= load_word (PC
+ 1);
739 insn
|= (extension
& 0xffffff00) >> 8;
741 dispatch (insn
, extension
, 5);
744 /* Six byte insns. */
748 extension
= load_word (PC
+ 2);
749 insn
|= ((extension
& 0xffff0000) >> 16);
751 dispatch (insn
, extension
, 6);
755 insn
= load_byte (PC
) << 24;
756 extension
= load_word (PC
+ 1);
757 insn
|= ((extension
>> 8) & 0xffffff);
758 extension
= (extension
& 0xff) << 16;
759 extension
|= load_byte (PC
+ 5) << 8;
760 extension
|= load_byte (PC
+ 6);
761 dispatch (insn
, extension
, 7);
766 extension
= load_word (PC
+ 2);
767 insn
|= ((extension
>> 16) & 0xffff);
769 extension
&= 0xffff00;
770 extension
|= load_byte (PC
+ 6);
771 dispatch (insn
, extension
, 7);
778 while (!State
.exception
);
783 for (i
= 0; i
< MAX_HASH
; i
++)
785 struct hash_entry
*h
;
788 printf("hash 0x%x:\n", i
);
792 printf("h->opcode = 0x%x, count = 0x%x\n", h
->opcode
, h
->count
);
809 mn10300_debug
= DEBUG
;
811 sim_resume (sd
, 0, 0);
816 sim_info (sd
, verbose
)
820 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "sim_info\n");
824 sim_create_inferior (sd
, argv
, env
)
840 sim_set_callbacks (p
)
843 mn10300_callback
= p
;
846 /* All the code for exiting, signals, etc needs to be revamped.
848 This is enough to get c-torture limping though. */
851 sim_stop_reason (sd
, reason
, sigrc
)
853 enum sim_stop
*reason
;
856 *reason
= sim_stopped
;
857 if (State
.exception
== SIGQUIT
)
860 *sigrc
= State
.exception
;
864 sim_fetch_register (sd
, rn
, memory
)
867 unsigned char *memory
;
869 put_word (memory
, State
.regs
[rn
]);
873 sim_store_register (sd
, rn
, memory
)
876 unsigned char *memory
;
878 State
.regs
[rn
] = get_word (memory
);
882 sim_read (sd
, addr
, buffer
, size
)
885 unsigned char *buffer
;
889 for (i
= 0; i
< size
; i
++)
890 buffer
[i
] = load_byte (addr
+ i
);
896 sim_do_command (sd
, cmd
)
900 (*mn10300_callback
->printf_filtered
) (mn10300_callback
, "\"%s\" is not a valid mn10300 simulator command.\n", cmd
);
904 sim_load (sd
, prog
, abfd
, from_tty
)
910 extern bfd
*sim_load_file (); /* ??? Don't know where this should live. */
913 prog_bfd
= sim_load_file (sd
, myname
, mn10300_callback
, prog
, abfd
,
914 sim_kind
== SIM_OPEN_DEBUG
);
915 if (prog_bfd
== NULL
)
917 PC
= bfd_get_start_address (prog_bfd
);
919 bfd_close (prog_bfd
);