2 * Copyright (c) 2012 ARM Limited
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
14 * Copyright (c) 2007 MIPS Technologies, Inc.
15 * All rights reserved.
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 * Authors: Korey Sewell
46 #include "arch/utility.hh"
47 #include "base/bigint.hh"
48 #include "config/the_isa.hh"
49 #include "cpu/inorder/resources/cache_unit.hh"
50 #include "cpu/inorder/resources/resource_list.hh"
51 #include "cpu/inorder/cpu.hh"
52 #include "cpu/inorder/first_stage.hh"
53 #include "cpu/inorder/inorder_dyn_inst.hh"
54 #include "cpu/inorder/pipeline_traits.hh"
55 #include "cpu/inorder/resource_pool.hh"
56 #include "cpu/inorder/thread_context.hh"
57 #include "cpu/inorder/thread_state.hh"
58 #include "cpu/activity.hh"
59 #include "cpu/base.hh"
60 #include "cpu/exetrace.hh"
61 #include "cpu/quiesce_event.hh"
62 #include "cpu/simple_thread.hh"
63 #include "cpu/thread_context.hh"
64 #include "debug/Activity.hh"
65 #include "debug/InOrderCPU.hh"
66 #include "debug/InOrderCachePort.hh"
67 #include "debug/Interrupt.hh"
68 #include "debug/Quiesce.hh"
69 #include "debug/RefCount.hh"
70 #include "debug/SkedCache.hh"
71 #include "params/InOrderCPU.hh"
72 #include "sim/full_system.hh"
73 #include "sim/process.hh"
74 #include "sim/stat_control.hh"
75 #include "sim/system.hh"
77 #if THE_ISA == ALPHA_ISA
78 #include "arch/alpha/osfpal.hh"
82 using namespace TheISA
;
83 using namespace ThePipeline
;
85 InOrderCPU::CachePort::CachePort(CacheUnit
*_cacheUnit
) :
86 CpuPort(_cacheUnit
->name() + "-cache-port", _cacheUnit
->cpu
),
91 InOrderCPU::CachePort::recvTiming(Packet
*pkt
)
93 assert(pkt
->isResponse());
96 DPRINTF(InOrderCachePort
, "Got error packet back for address: %x\n",
99 cacheUnit
->processCacheCompletion(pkt
);
105 InOrderCPU::CachePort::recvRetry()
107 cacheUnit
->recvRetry();
110 InOrderCPU::TickEvent::TickEvent(InOrderCPU
*c
)
111 : Event(CPU_Tick_Pri
), cpu(c
)
116 InOrderCPU::TickEvent::process()
123 InOrderCPU::TickEvent::description() const
125 return "InOrderCPU tick event";
128 InOrderCPU::CPUEvent::CPUEvent(InOrderCPU
*_cpu
, CPUEventType e_type
,
129 Fault fault
, ThreadID _tid
, DynInstPtr inst
,
130 CPUEventPri event_pri
)
131 : Event(event_pri
), cpu(_cpu
)
133 setEvent(e_type
, fault
, _tid
, inst
);
137 std::string
InOrderCPU::eventNames
[NumCPUEvents
] =
140 "ActivateNextReadyThread",
146 "SquashFromMemStall",
151 InOrderCPU::CPUEvent::process()
153 switch (cpuEventType
)
156 cpu
->activateThread(tid
);
157 cpu
->resPool
->activateThread(tid
);
160 case ActivateNextReadyThread
:
161 cpu
->activateNextReadyThread();
164 case DeactivateThread
:
165 cpu
->deactivateThread(tid
);
166 cpu
->resPool
->deactivateThread(tid
);
170 cpu
->haltThread(tid
);
171 cpu
->resPool
->deactivateThread(tid
);
175 cpu
->suspendThread(tid
);
176 cpu
->resPool
->suspendThread(tid
);
179 case SquashFromMemStall
:
180 cpu
->squashDueToMemStall(inst
->squashingStage
, inst
->seqNum
, tid
);
181 cpu
->resPool
->squashDueToMemStall(inst
, inst
->squashingStage
,
186 DPRINTF(InOrderCPU
, "Trapping CPU\n");
187 cpu
->trap(fault
, tid
, inst
);
188 cpu
->resPool
->trap(fault
, tid
, inst
);
189 cpu
->trapPending
[tid
] = false;
193 cpu
->syscall(inst
->syscallNum
, tid
);
194 cpu
->resPool
->trap(fault
, tid
, inst
);
198 fatal("Unrecognized Event Type %s", eventNames
[cpuEventType
]);
201 cpu
->cpuEventRemoveList
.push(this);
207 InOrderCPU::CPUEvent::description() const
209 return "InOrderCPU event";
213 InOrderCPU::CPUEvent::scheduleEvent(int delay
)
215 assert(!scheduled() || squashed());
216 cpu
->reschedule(this, cpu
->nextCycle(curTick() + cpu
->ticks(delay
)), true);
220 InOrderCPU::CPUEvent::unscheduleEvent()
226 InOrderCPU::InOrderCPU(Params
*params
)
228 cpu_id(params
->cpu_id
),
232 stageWidth(params
->stageWidth
),
233 resPool(new ResourcePool(this, params
)),
235 dataPort(resPool
->getDataUnit()),
236 instPort(resPool
->getInstUnit()),
237 removeInstsThisCycle(false),
238 activityRec(params
->name
, NumStages
, 10, params
->activity
),
239 system(params
->system
),
245 deferRegistration(false/*params->deferRegistration*/),
246 stageTracing(params
->stageTracing
),
252 // Resize for Multithreading CPUs
253 thread
.resize(numThreads
);
255 ThreadID active_threads
= params
->workload
.size();
259 active_threads
= params
->workload
.size();
261 if (active_threads
> MaxThreads
) {
262 panic("Workload Size too large. Increase the 'MaxThreads'"
263 "in your InOrder implementation or "
264 "edit your workload size.");
268 if (active_threads
> 1) {
269 threadModel
= (InOrderCPU::ThreadModel
) params
->threadModel
;
271 if (threadModel
== SMT
) {
272 DPRINTF(InOrderCPU
, "Setting Thread Model to SMT.\n");
273 } else if (threadModel
== SwitchOnCacheMiss
) {
274 DPRINTF(InOrderCPU
, "Setting Thread Model to "
275 "Switch On Cache Miss\n");
279 threadModel
= Single
;
283 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
) {
285 lastCommittedPC
[tid
].set(0);
288 // SMT is not supported in FS mode yet.
289 assert(numThreads
== 1);
290 thread
[tid
] = new Thread(this, 0, NULL
);
292 if (tid
< (ThreadID
)params
->workload
.size()) {
293 DPRINTF(InOrderCPU
, "Workload[%i] process is %#x\n",
294 tid
, params
->workload
[tid
]->prog_fname
);
296 new Thread(this, tid
, params
->workload
[tid
]);
298 //Allocate Empty thread so M5 can use later
299 //when scheduling threads to CPU
300 Process
* dummy_proc
= params
->workload
[0];
301 thread
[tid
] = new Thread(this, tid
, dummy_proc
);
304 // Eventually set this with parameters...
308 // Setup the TC that will serve as the interface to the threads/CPU.
309 InOrderThreadContext
*tc
= new InOrderThreadContext
;
311 tc
->thread
= thread
[tid
];
313 // Setup quiesce event.
314 this->thread
[tid
]->quiesceEvent
= new EndQuiesceEvent(tc
);
316 // Give the thread the TC.
317 thread
[tid
]->tc
= tc
;
318 thread
[tid
]->setFuncExeInst(0);
319 globalSeqNum
[tid
] = 1;
321 // Add the TC to the CPU's list of TC's.
322 this->threadContexts
.push_back(tc
);
325 // Initialize TimeBuffer Stage Queues
326 for (int stNum
=0; stNum
< NumStages
- 1; stNum
++) {
327 stageQueue
[stNum
] = new StageQueue(NumStages
, NumStages
);
328 stageQueue
[stNum
]->id(stNum
);
332 // Set Up Pipeline Stages
333 for (int stNum
=0; stNum
< NumStages
; stNum
++) {
335 pipelineStage
[stNum
] = new FirstStage(params
, stNum
);
337 pipelineStage
[stNum
] = new PipelineStage(params
, stNum
);
339 pipelineStage
[stNum
]->setCPU(this);
340 pipelineStage
[stNum
]->setActiveThreads(&activeThreads
);
341 pipelineStage
[stNum
]->setTimeBuffer(&timeBuffer
);
343 // Take Care of 1st/Nth stages
345 pipelineStage
[stNum
]->setPrevStageQueue(stageQueue
[stNum
- 1]);
346 if (stNum
< NumStages
- 1)
347 pipelineStage
[stNum
]->setNextStageQueue(stageQueue
[stNum
]);
350 // Initialize thread specific variables
351 for (ThreadID tid
= 0; tid
< numThreads
; tid
++) {
352 archRegDepMap
[tid
].setCPU(this);
354 nonSpecInstActive
[tid
] = false;
355 nonSpecSeqNum
[tid
] = 0;
357 squashSeqNum
[tid
] = MaxAddr
;
358 lastSquashCycle
[tid
] = 0;
360 memset(intRegs
[tid
], 0, sizeof(intRegs
[tid
]));
361 memset(floatRegs
.i
[tid
], 0, sizeof(floatRegs
.i
[tid
]));
364 // Define dummy instructions and resource requests to be used.
365 dummyInst
[tid
] = new InOrderDynInst(this,
371 dummyReq
[tid
] = new ResourceRequest(resPool
->getResource(0));
375 // Use this dummy inst to force squashing behind every instruction
377 dummyTrapInst
[tid
] = new InOrderDynInst(this, NULL
, 0, 0, 0);
378 dummyTrapInst
[tid
]->seqNum
= 0;
379 dummyTrapInst
[tid
]->squashSeqNum
= 0;
380 dummyTrapInst
[tid
]->setTid(tid
);
383 trapPending
[tid
] = false;
387 // InOrderCPU always requires an interrupt controller.
388 if (!params
->defer_registration
&& !interrupts
) {
389 fatal("InOrderCPU %s has no interrupt controller.\n"
390 "Ensure createInterruptController() is called.\n", name());
393 dummyReqInst
= new InOrderDynInst(this, NULL
, 0, 0, 0);
394 dummyReqInst
->setSquashed();
395 dummyReqInst
->resetInstCount();
397 dummyBufferInst
= new InOrderDynInst(this, NULL
, 0, 0, 0);
398 dummyBufferInst
->setSquashed();
399 dummyBufferInst
->resetInstCount();
401 endOfSkedIt
= skedCache
.end();
402 frontEndSked
= createFrontEndSked();
403 faultSked
= createFaultSked();
405 lastRunningCycle
= curTick();
410 // Schedule First Tick Event, CPU will reschedule itself from here on out.
411 scheduleTickEvent(0);
414 InOrderCPU::~InOrderCPU()
418 SkedCacheIt sked_it
= skedCache
.begin();
419 SkedCacheIt sked_end
= skedCache
.end();
421 while (sked_it
!= sked_end
) {
422 delete (*sked_it
).second
;
428 m5::hash_map
<InOrderCPU::SkedID
, ThePipeline::RSkedPtr
> InOrderCPU::skedCache
;
431 InOrderCPU::createFrontEndSked()
433 RSkedPtr res_sked
= new ResourceSked();
435 StageScheduler
F(res_sked
, stage_num
++);
436 StageScheduler
D(res_sked
, stage_num
++);
439 F
.needs(FetchSeq
, FetchSeqUnit::AssignNextPC
);
440 F
.needs(ICache
, FetchUnit::InitiateFetch
);
443 D
.needs(ICache
, FetchUnit::CompleteFetch
);
444 D
.needs(Decode
, DecodeUnit::DecodeInst
);
445 D
.needs(BPred
, BranchPredictor::PredictBranch
);
446 D
.needs(FetchSeq
, FetchSeqUnit::UpdateTargetPC
);
449 DPRINTF(SkedCache
, "Resource Sked created for instruction Front End\n");
455 InOrderCPU::createFaultSked()
457 RSkedPtr res_sked
= new ResourceSked();
458 StageScheduler
W(res_sked
, NumStages
- 1);
459 W
.needs(Grad
, GraduationUnit::CheckFault
);
460 DPRINTF(SkedCache
, "Resource Sked created for instruction Faults\n");
465 InOrderCPU::createBackEndSked(DynInstPtr inst
)
467 RSkedPtr res_sked
= lookupSked(inst
);
468 if (res_sked
!= NULL
) {
469 DPRINTF(SkedCache
, "Found %s in sked cache.\n",
473 res_sked
= new ResourceSked();
476 int stage_num
= ThePipeline::BackEndStartStage
;
477 StageScheduler
X(res_sked
, stage_num
++);
478 StageScheduler
M(res_sked
, stage_num
++);
479 StageScheduler
W(res_sked
, stage_num
++);
481 if (!inst
->staticInst
) {
482 warn_once("Static Instruction Object Not Set. Can't Create"
483 " Back End Schedule");
488 X
.needs(RegManager
, UseDefUnit::MarkDestRegs
);
489 for (int idx
=0; idx
< inst
->numSrcRegs(); idx
++) {
490 if (!idx
|| !inst
->isStore()) {
491 X
.needs(RegManager
, UseDefUnit::ReadSrcReg
, idx
);
495 //@todo: schedule non-spec insts to operate on this cycle
496 // as long as all previous insts are done
497 if ( inst
->isNonSpeculative() ) {
498 // skip execution of non speculative insts until later
499 } else if ( inst
->isMemRef() ) {
500 if ( inst
->isLoad() ) {
501 X
.needs(AGEN
, AGENUnit::GenerateAddr
);
503 } else if (inst
->opClass() == IntMultOp
|| inst
->opClass() == IntDivOp
) {
504 X
.needs(MDU
, MultDivUnit::StartMultDiv
);
506 X
.needs(ExecUnit
, ExecutionUnit::ExecuteInst
);
510 if (!inst
->isNonSpeculative()) {
511 if (inst
->opClass() == IntMultOp
|| inst
->opClass() == IntDivOp
) {
512 M
.needs(MDU
, MultDivUnit::EndMultDiv
);
515 if ( inst
->isLoad() ) {
516 M
.needs(DCache
, CacheUnit::InitiateReadData
);
518 M
.needs(DCache
, CacheUnit::InitSecondSplitRead
);
519 } else if ( inst
->isStore() ) {
520 for (int i
= 1; i
< inst
->numSrcRegs(); i
++ ) {
521 M
.needs(RegManager
, UseDefUnit::ReadSrcReg
, i
);
523 M
.needs(AGEN
, AGENUnit::GenerateAddr
);
524 M
.needs(DCache
, CacheUnit::InitiateWriteData
);
526 M
.needs(DCache
, CacheUnit::InitSecondSplitWrite
);
531 if (!inst
->isNonSpeculative()) {
532 if ( inst
->isLoad() ) {
533 W
.needs(DCache
, CacheUnit::CompleteReadData
);
535 W
.needs(DCache
, CacheUnit::CompleteSecondSplitRead
);
536 } else if ( inst
->isStore() ) {
537 W
.needs(DCache
, CacheUnit::CompleteWriteData
);
539 W
.needs(DCache
, CacheUnit::CompleteSecondSplitWrite
);
542 // Finally, Execute Speculative Data
543 if (inst
->isMemRef()) {
544 if (inst
->isLoad()) {
545 W
.needs(AGEN
, AGENUnit::GenerateAddr
);
546 W
.needs(DCache
, CacheUnit::InitiateReadData
);
548 W
.needs(DCache
, CacheUnit::InitSecondSplitRead
);
549 W
.needs(DCache
, CacheUnit::CompleteReadData
);
551 W
.needs(DCache
, CacheUnit::CompleteSecondSplitRead
);
552 } else if (inst
->isStore()) {
553 if ( inst
->numSrcRegs() >= 2 ) {
554 W
.needs(RegManager
, UseDefUnit::ReadSrcReg
, 1);
556 W
.needs(AGEN
, AGENUnit::GenerateAddr
);
557 W
.needs(DCache
, CacheUnit::InitiateWriteData
);
559 W
.needs(DCache
, CacheUnit::InitSecondSplitWrite
);
560 W
.needs(DCache
, CacheUnit::CompleteWriteData
);
562 W
.needs(DCache
, CacheUnit::CompleteSecondSplitWrite
);
565 W
.needs(ExecUnit
, ExecutionUnit::ExecuteInst
);
569 W
.needs(Grad
, GraduationUnit::CheckFault
);
571 for (int idx
=0; idx
< inst
->numDestRegs(); idx
++) {
572 W
.needs(RegManager
, UseDefUnit::WriteDestReg
, idx
);
575 if (inst
->isControl())
576 W
.needs(BPred
, BranchPredictor::UpdatePredictor
);
578 W
.needs(Grad
, GraduationUnit::GraduateInst
);
580 // Insert Back Schedule into our cache of
581 // resource schedules
582 addToSkedCache(inst
, res_sked
);
584 DPRINTF(SkedCache
, "Back End Sked Created for instruction: %s (%08p)\n",
585 inst
->instName(), inst
->getMachInst());
592 InOrderCPU::regStats()
594 /* Register the Resource Pool's stats here.*/
597 /* Register for each Pipeline Stage */
598 for (int stage_num
=0; stage_num
< ThePipeline::NumStages
; stage_num
++) {
599 pipelineStage
[stage_num
]->regStats();
602 /* Register any of the InOrderCPU's stats here.*/
604 .name(name() + ".instsPerContextSwitch")
605 .desc("Instructions Committed Per Context Switch")
606 .prereq(instsPerCtxtSwitch
);
609 .name(name() + ".contextSwitches")
610 .desc("Number of context switches");
613 .name(name() + ".comLoads")
614 .desc("Number of Load instructions committed");
617 .name(name() + ".comStores")
618 .desc("Number of Store instructions committed");
621 .name(name() + ".comBranches")
622 .desc("Number of Branches instructions committed");
625 .name(name() + ".comNops")
626 .desc("Number of Nop instructions committed");
629 .name(name() + ".comNonSpec")
630 .desc("Number of Non-Speculative instructions committed");
633 .name(name() + ".comInts")
634 .desc("Number of Integer instructions committed");
637 .name(name() + ".comFloats")
638 .desc("Number of Floating Point instructions committed");
641 .name(name() + ".timesIdled")
642 .desc("Number of times that the entire CPU went into an idle state and"
643 " unscheduled itself")
647 .name(name() + ".idleCycles")
648 .desc("Number of cycles cpu's stages were not processed");
651 .name(name() + ".runCycles")
652 .desc("Number of cycles cpu stages are processed.");
655 .name(name() + ".activity")
656 .desc("Percentage of cycles cpu is active")
658 activity
= (runCycles
/ numCycles
) * 100;
662 .name(name() + ".threadCycles")
663 .desc("Total Number of Cycles A Thread Was Active in CPU (Per-Thread)");
666 .name(name() + ".smtCycles")
667 .desc("Total number of cycles that the CPU was in SMT-mode");
671 .name(name() + ".committedInsts")
672 .desc("Number of Instructions committed (Per-Thread)");
676 .name(name() + ".committedOps")
677 .desc("Number of Ops committed (Per-Thread)");
681 .name(name() + ".smtCommittedInsts")
682 .desc("Number of SMT Instructions committed (Per-Thread)");
685 .name(name() + ".committedInsts_total")
686 .desc("Number of Instructions committed (Total)");
689 .name(name() + ".cpi")
690 .desc("CPI: Cycles Per Instruction (Per-Thread)")
692 cpi
= numCycles
/ committedInsts
;
695 .name(name() + ".smt_cpi")
696 .desc("CPI: Total SMT-CPI")
698 smtCpi
= smtCycles
/ smtCommittedInsts
;
701 .name(name() + ".cpi_total")
702 .desc("CPI: Total CPI of All Threads")
704 totalCpi
= numCycles
/ totalCommittedInsts
;
707 .name(name() + ".ipc")
708 .desc("IPC: Instructions Per Cycle (Per-Thread)")
710 ipc
= committedInsts
/ numCycles
;
713 .name(name() + ".smt_ipc")
714 .desc("IPC: Total SMT-IPC")
716 smtIpc
= smtCommittedInsts
/ smtCycles
;
719 .name(name() + ".ipc_total")
720 .desc("IPC: Total IPC of All Threads")
722 totalIpc
= totalCommittedInsts
/ numCycles
;
731 DPRINTF(InOrderCPU
, "\n\nInOrderCPU: Ticking main, InOrderCPU.\n");
735 checkForInterrupts();
737 bool pipes_idle
= true;
738 //Tick each of the stages
739 for (int stNum
=NumStages
- 1; stNum
>= 0 ; stNum
--) {
740 pipelineStage
[stNum
]->tick();
742 pipes_idle
= pipes_idle
&& pipelineStage
[stNum
]->idle
;
750 // Now advance the time buffers one tick
751 timeBuffer
.advance();
752 for (int sqNum
=0; sqNum
< NumStages
- 1; sqNum
++) {
753 stageQueue
[sqNum
]->advance();
755 activityRec
.advance();
757 // Any squashed events, or insts then remove them now
758 cleanUpRemovedEvents();
759 cleanUpRemovedInsts();
761 // Re-schedule CPU for this cycle
762 if (!tickEvent
.scheduled()) {
763 if (_status
== SwitchedOut
) {
765 lastRunningCycle
= curTick();
766 } else if (!activityRec
.active()) {
767 DPRINTF(InOrderCPU
, "sleeping CPU.\n");
768 lastRunningCycle
= curTick();
771 //Tick next_tick = curTick() + cycles(1);
772 //tickEvent.schedule(next_tick);
773 schedule(&tickEvent
, nextCycle(curTick() + 1));
774 DPRINTF(InOrderCPU
, "Scheduled CPU for next tick @ %i.\n",
775 nextCycle(curTick() + 1));
780 updateThreadPriority();
789 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
) {
790 // Set inSyscall so that the CPU doesn't squash when initially
791 // setting up registers.
792 thread
[tid
]->inSyscall
= true;
793 // Initialise the ThreadContext's memory proxies
794 thread
[tid
]->initMemProxies(thread
[tid
]->getTC());
798 for (ThreadID tid
= 0; tid
< numThreads
; tid
++) {
799 ThreadContext
*src_tc
= threadContexts
[tid
];
800 TheISA::initCPU(src_tc
, src_tc
->contextId());
805 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
)
806 thread
[tid
]->inSyscall
= false;
808 // Call Initializiation Routine for Resource Pool
813 InOrderCPU::hwrei(ThreadID tid
)
815 #if THE_ISA == ALPHA_ISA
816 // Need to clear the lock flag upon returning from an interrupt.
817 setMiscRegNoEffect(AlphaISA::MISCREG_LOCKFLAG
, false, tid
);
819 thread
[tid
]->kernelStats
->hwrei();
820 // FIXME: XXX check for interrupts? XXX
828 InOrderCPU::simPalCheck(int palFunc
, ThreadID tid
)
830 #if THE_ISA == ALPHA_ISA
831 if (this->thread
[tid
]->kernelStats
)
832 this->thread
[tid
]->kernelStats
->callpal(palFunc
,
833 this->threadContexts
[tid
]);
838 if (--System::numSystemsRunning
== 0)
839 exitSimLoop("all cpus halted");
844 if (this->system
->breakpoint())
853 InOrderCPU::checkForInterrupts()
855 for (int i
= 0; i
< threadContexts
.size(); i
++) {
856 ThreadContext
*tc
= threadContexts
[i
];
858 if (interrupts
->checkInterrupts(tc
)) {
859 Fault interrupt
= interrupts
->getInterrupt(tc
);
861 if (interrupt
!= NoFault
) {
862 DPRINTF(Interrupt
, "Processing Intterupt for [tid:%i].\n",
865 ThreadID tid
= tc
->threadId();
866 interrupts
->updateIntrInfo(tc
);
868 // Squash from Last Stage in Pipeline
869 unsigned last_stage
= NumStages
- 1;
870 dummyTrapInst
[tid
]->squashingStage
= last_stage
;
871 pipelineStage
[last_stage
]->setupSquash(dummyTrapInst
[tid
],
874 // By default, setupSquash will always squash from stage + 1
875 pipelineStage
[BackEndStartStage
- 1]->setupSquash(dummyTrapInst
[tid
],
878 // Schedule Squash Through-out Resource Pool
879 resPool
->scheduleEvent(
880 (InOrderCPU::CPUEventType
)ResourcePool::SquashAll
,
881 dummyTrapInst
[tid
], 0);
883 // Finally, Setup Trap to happen at end of cycle
884 trapContext(interrupt
, tid
, dummyTrapInst
[tid
]);
891 InOrderCPU::getInterrupts()
893 // Check if there are any outstanding interrupts
894 return interrupts
->getInterrupt(threadContexts
[0]);
898 InOrderCPU::processInterrupts(Fault interrupt
)
900 // Check for interrupts here. For now can copy the code that
901 // exists within isa_fullsys_traits.hh. Also assume that thread 0
902 // is the one that handles the interrupts.
903 // @todo: Possibly consolidate the interrupt checking code.
904 // @todo: Allow other threads to handle interrupts.
906 assert(interrupt
!= NoFault
);
907 interrupts
->updateIntrInfo(threadContexts
[0]);
909 DPRINTF(InOrderCPU
, "Interrupt %s being handled\n", interrupt
->name());
911 // Note: Context ID ok here? Impl. of FS mode needs to revisit this
912 trap(interrupt
, threadContexts
[0]->contextId(), dummyBufferInst
);
916 InOrderCPU::trapContext(Fault fault
, ThreadID tid
, DynInstPtr inst
, int delay
)
918 scheduleCpuEvent(Trap
, fault
, tid
, inst
, delay
);
919 trapPending
[tid
] = true;
923 InOrderCPU::trap(Fault fault
, ThreadID tid
, DynInstPtr inst
)
925 fault
->invoke(tcBase(tid
), inst
->staticInst
);
926 removePipelineStalls(tid
);
930 InOrderCPU::squashFromMemStall(DynInstPtr inst
, ThreadID tid
, int delay
)
932 scheduleCpuEvent(SquashFromMemStall
, NoFault
, tid
, inst
, delay
);
937 InOrderCPU::squashDueToMemStall(int stage_num
, InstSeqNum seq_num
,
940 DPRINTF(InOrderCPU
, "Squashing Pipeline Stages Due to Memory Stall...\n");
942 // Squash all instructions in each stage including
943 // instruction that caused the squash (seq_num - 1)
944 // NOTE: The stage bandwidth needs to be cleared so thats why
945 // the stalling instruction is squashed as well. The stalled
946 // instruction is previously placed in another intermediate buffer
947 // while it's stall is being handled.
948 InstSeqNum squash_seq_num
= seq_num
- 1;
950 for (int stNum
=stage_num
; stNum
>= 0 ; stNum
--) {
951 pipelineStage
[stNum
]->squashDueToMemStall(squash_seq_num
, tid
);
956 InOrderCPU::scheduleCpuEvent(CPUEventType c_event
, Fault fault
,
957 ThreadID tid
, DynInstPtr inst
,
958 unsigned delay
, CPUEventPri event_pri
)
960 CPUEvent
*cpu_event
= new CPUEvent(this, c_event
, fault
, tid
, inst
,
963 Tick sked_tick
= nextCycle(curTick() + ticks(delay
));
965 DPRINTF(InOrderCPU
, "Scheduling CPU Event (%s) for cycle %i, [tid:%i].\n",
966 eventNames
[c_event
], curTick() + delay
, tid
);
967 schedule(cpu_event
, sked_tick
);
969 cpu_event
->process();
970 cpuEventRemoveList
.push(cpu_event
);
973 // Broadcast event to the Resource Pool
974 // Need to reset tid just in case this is a dummy instruction
976 resPool
->scheduleEvent(c_event
, inst
, 0, 0, tid
);
980 InOrderCPU::isThreadActive(ThreadID tid
)
982 list
<ThreadID
>::iterator isActive
=
983 std::find(activeThreads
.begin(), activeThreads
.end(), tid
);
985 return (isActive
!= activeThreads
.end());
989 InOrderCPU::isThreadReady(ThreadID tid
)
991 list
<ThreadID
>::iterator isReady
=
992 std::find(readyThreads
.begin(), readyThreads
.end(), tid
);
994 return (isReady
!= readyThreads
.end());
998 InOrderCPU::isThreadSuspended(ThreadID tid
)
1000 list
<ThreadID
>::iterator isSuspended
=
1001 std::find(suspendedThreads
.begin(), suspendedThreads
.end(), tid
);
1003 return (isSuspended
!= suspendedThreads
.end());
1007 InOrderCPU::activateNextReadyThread()
1009 if (readyThreads
.size() >= 1) {
1010 ThreadID ready_tid
= readyThreads
.front();
1012 // Activate in Pipeline
1013 activateThread(ready_tid
);
1015 // Activate in Resource Pool
1016 resPool
->activateThread(ready_tid
);
1018 list
<ThreadID
>::iterator ready_it
=
1019 std::find(readyThreads
.begin(), readyThreads
.end(), ready_tid
);
1020 readyThreads
.erase(ready_it
);
1023 "Attempting to activate new thread, but No Ready Threads to"
1026 "Unable to switch to next active thread.\n");
1031 InOrderCPU::activateThread(ThreadID tid
)
1033 if (isThreadSuspended(tid
)) {
1035 "Removing [tid:%i] from suspended threads list.\n", tid
);
1037 list
<ThreadID
>::iterator susp_it
=
1038 std::find(suspendedThreads
.begin(), suspendedThreads
.end(),
1040 suspendedThreads
.erase(susp_it
);
1043 if (threadModel
== SwitchOnCacheMiss
&&
1044 numActiveThreads() == 1) {
1046 "Ignoring activation of [tid:%i], since [tid:%i] is "
1047 "already running.\n", tid
, activeThreadId());
1049 DPRINTF(InOrderCPU
,"Placing [tid:%i] on ready threads list\n",
1052 readyThreads
.push_back(tid
);
1054 } else if (!isThreadActive(tid
)) {
1056 "Adding [tid:%i] to active threads list.\n", tid
);
1057 activeThreads
.push_back(tid
);
1059 activateThreadInPipeline(tid
);
1061 thread
[tid
]->lastActivate
= curTick();
1063 tcBase(tid
)->setStatus(ThreadContext::Active
);
1072 InOrderCPU::activateThreadInPipeline(ThreadID tid
)
1074 for (int stNum
=0; stNum
< NumStages
; stNum
++) {
1075 pipelineStage
[stNum
]->activateThread(tid
);
1080 InOrderCPU::deactivateContext(ThreadID tid
, int delay
)
1082 DPRINTF(InOrderCPU
,"[tid:%i]: Deactivating ...\n", tid
);
1084 scheduleCpuEvent(DeactivateThread
, NoFault
, tid
, dummyInst
[tid
], delay
);
1086 // Be sure to signal that there's some activity so the CPU doesn't
1087 // deschedule itself.
1088 activityRec
.activity();
1094 InOrderCPU::deactivateThread(ThreadID tid
)
1096 DPRINTF(InOrderCPU
, "[tid:%i]: Calling deactivate thread.\n", tid
);
1098 if (isThreadActive(tid
)) {
1099 DPRINTF(InOrderCPU
,"[tid:%i]: Removing from active threads list\n",
1101 list
<ThreadID
>::iterator thread_it
=
1102 std::find(activeThreads
.begin(), activeThreads
.end(), tid
);
1104 removePipelineStalls(*thread_it
);
1106 activeThreads
.erase(thread_it
);
1108 // Ideally, this should be triggered from the
1109 // suspendContext/Thread functions
1110 tcBase(tid
)->setStatus(ThreadContext::Suspended
);
1113 assert(!isThreadActive(tid
));
1117 InOrderCPU::removePipelineStalls(ThreadID tid
)
1119 DPRINTF(InOrderCPU
,"[tid:%i]: Removing all pipeline stalls\n",
1122 for (int stNum
= 0; stNum
< NumStages
; stNum
++) {
1123 pipelineStage
[stNum
]->removeStalls(tid
);
1129 InOrderCPU::updateThreadPriority()
1131 if (activeThreads
.size() > 1)
1133 //DEFAULT TO ROUND ROBIN SCHEME
1134 //e.g. Move highest priority to end of thread list
1135 list
<ThreadID
>::iterator list_begin
= activeThreads
.begin();
1137 unsigned high_thread
= *list_begin
;
1139 activeThreads
.erase(list_begin
);
1141 activeThreads
.push_back(high_thread
);
1146 InOrderCPU::tickThreadStats()
1148 /** Keep track of cycles that each thread is active */
1149 list
<ThreadID
>::iterator thread_it
= activeThreads
.begin();
1150 while (thread_it
!= activeThreads
.end()) {
1151 threadCycles
[*thread_it
]++;
1155 // Keep track of cycles where SMT is active
1156 if (activeThreads
.size() > 1) {
1162 InOrderCPU::activateContext(ThreadID tid
, int delay
)
1164 DPRINTF(InOrderCPU
,"[tid:%i]: Activating ...\n", tid
);
1167 scheduleCpuEvent(ActivateThread
, NoFault
, tid
, dummyInst
[tid
], delay
);
1169 // Be sure to signal that there's some activity so the CPU doesn't
1170 // deschedule itself.
1171 activityRec
.activity();
1177 InOrderCPU::activateNextReadyContext(int delay
)
1179 DPRINTF(InOrderCPU
,"Activating next ready thread\n");
1181 scheduleCpuEvent(ActivateNextReadyThread
, NoFault
, 0/*tid*/, dummyInst
[0],
1182 delay
, ActivateNextReadyThread_Pri
);
1184 // Be sure to signal that there's some activity so the CPU doesn't
1185 // deschedule itself.
1186 activityRec
.activity();
1192 InOrderCPU::haltContext(ThreadID tid
)
1194 DPRINTF(InOrderCPU
, "[tid:%i]: Calling Halt Context...\n", tid
);
1196 scheduleCpuEvent(HaltThread
, NoFault
, tid
, dummyInst
[tid
]);
1198 activityRec
.activity();
1202 InOrderCPU::haltThread(ThreadID tid
)
1204 DPRINTF(InOrderCPU
, "[tid:%i]: Placing on Halted Threads List...\n", tid
);
1205 deactivateThread(tid
);
1206 squashThreadInPipeline(tid
);
1207 haltedThreads
.push_back(tid
);
1209 tcBase(tid
)->setStatus(ThreadContext::Halted
);
1211 if (threadModel
== SwitchOnCacheMiss
) {
1212 activateNextReadyContext();
1217 InOrderCPU::suspendContext(ThreadID tid
)
1219 scheduleCpuEvent(SuspendThread
, NoFault
, tid
, dummyInst
[tid
]);
1223 InOrderCPU::suspendThread(ThreadID tid
)
1225 DPRINTF(InOrderCPU
, "[tid:%i]: Placing on Suspended Threads List...\n",
1227 deactivateThread(tid
);
1228 suspendedThreads
.push_back(tid
);
1229 thread
[tid
]->lastSuspend
= curTick();
1231 tcBase(tid
)->setStatus(ThreadContext::Suspended
);
1235 InOrderCPU::squashThreadInPipeline(ThreadID tid
)
1237 //Squash all instructions in each stage
1238 for (int stNum
=NumStages
- 1; stNum
>= 0 ; stNum
--) {
1239 pipelineStage
[stNum
]->squash(0 /*seq_num*/, tid
);
1244 InOrderCPU::getPipeStage(int stage_num
)
1246 return pipelineStage
[stage_num
];
1251 InOrderCPU::flattenRegIdx(RegIndex reg_idx
, RegType
®_type
, ThreadID tid
)
1253 if (reg_idx
< FP_Base_DepTag
) {
1255 return isa
[tid
].flattenIntIndex(reg_idx
);
1256 } else if (reg_idx
< Ctrl_Base_DepTag
) {
1257 reg_type
= FloatType
;
1258 reg_idx
-= FP_Base_DepTag
;
1259 return isa
[tid
].flattenFloatIndex(reg_idx
);
1261 reg_type
= MiscType
;
1262 return reg_idx
- TheISA::Ctrl_Base_DepTag
;
1267 InOrderCPU::readIntReg(RegIndex reg_idx
, ThreadID tid
)
1269 DPRINTF(IntRegs
, "[tid:%i]: Reading Int. Reg %i as %x\n",
1270 tid
, reg_idx
, intRegs
[tid
][reg_idx
]);
1272 return intRegs
[tid
][reg_idx
];
1276 InOrderCPU::readFloatReg(RegIndex reg_idx
, ThreadID tid
)
1278 DPRINTF(FloatRegs
, "[tid:%i]: Reading Float Reg %i as %x, %08f\n",
1279 tid
, reg_idx
, floatRegs
.i
[tid
][reg_idx
], floatRegs
.f
[tid
][reg_idx
]);
1281 return floatRegs
.f
[tid
][reg_idx
];
1285 InOrderCPU::readFloatRegBits(RegIndex reg_idx
, ThreadID tid
)
1287 DPRINTF(FloatRegs
, "[tid:%i]: Reading Float Reg %i as %x, %08f\n",
1288 tid
, reg_idx
, floatRegs
.i
[tid
][reg_idx
], floatRegs
.f
[tid
][reg_idx
]);
1290 return floatRegs
.i
[tid
][reg_idx
];
1294 InOrderCPU::setIntReg(RegIndex reg_idx
, uint64_t val
, ThreadID tid
)
1296 if (reg_idx
== TheISA::ZeroReg
) {
1297 DPRINTF(IntRegs
, "[tid:%i]: Ignoring Setting of ISA-ZeroReg "
1298 "(Int. Reg %i) to %x\n", tid
, reg_idx
, val
);
1301 DPRINTF(IntRegs
, "[tid:%i]: Setting Int. Reg %i to %x\n",
1304 intRegs
[tid
][reg_idx
] = val
;
1310 InOrderCPU::setFloatReg(RegIndex reg_idx
, FloatReg val
, ThreadID tid
)
1312 floatRegs
.f
[tid
][reg_idx
] = val
;
1313 DPRINTF(FloatRegs
, "[tid:%i]: Setting Float. Reg %i bits to "
1316 floatRegs
.i
[tid
][reg_idx
],
1317 floatRegs
.f
[tid
][reg_idx
]);
1322 InOrderCPU::setFloatRegBits(RegIndex reg_idx
, FloatRegBits val
, ThreadID tid
)
1324 floatRegs
.i
[tid
][reg_idx
] = val
;
1325 DPRINTF(FloatRegs
, "[tid:%i]: Setting Float. Reg %i bits to "
1328 floatRegs
.i
[tid
][reg_idx
],
1329 floatRegs
.f
[tid
][reg_idx
]);
1333 InOrderCPU::readRegOtherThread(unsigned reg_idx
, ThreadID tid
)
1335 // If Default value is set, then retrieve target thread
1336 if (tid
== InvalidThreadID
) {
1337 tid
= TheISA::getTargetThread(tcBase(tid
));
1340 if (reg_idx
< FP_Base_DepTag
) {
1341 // Integer Register File
1342 return readIntReg(reg_idx
, tid
);
1343 } else if (reg_idx
< Ctrl_Base_DepTag
) {
1344 // Float Register File
1345 reg_idx
-= FP_Base_DepTag
;
1346 return readFloatRegBits(reg_idx
, tid
);
1348 reg_idx
-= Ctrl_Base_DepTag
;
1349 return readMiscReg(reg_idx
, tid
); // Misc. Register File
1353 InOrderCPU::setRegOtherThread(unsigned reg_idx
, const MiscReg
&val
,
1356 // If Default value is set, then retrieve target thread
1357 if (tid
== InvalidThreadID
) {
1358 tid
= TheISA::getTargetThread(tcBase(tid
));
1361 if (reg_idx
< FP_Base_DepTag
) { // Integer Register File
1362 setIntReg(reg_idx
, val
, tid
);
1363 } else if (reg_idx
< Ctrl_Base_DepTag
) { // Float Register File
1364 reg_idx
-= FP_Base_DepTag
;
1365 setFloatRegBits(reg_idx
, val
, tid
);
1367 reg_idx
-= Ctrl_Base_DepTag
;
1368 setMiscReg(reg_idx
, val
, tid
); // Misc. Register File
1373 InOrderCPU::readMiscRegNoEffect(int misc_reg
, ThreadID tid
)
1375 return isa
[tid
].readMiscRegNoEffect(misc_reg
);
1379 InOrderCPU::readMiscReg(int misc_reg
, ThreadID tid
)
1381 return isa
[tid
].readMiscReg(misc_reg
, tcBase(tid
));
1385 InOrderCPU::setMiscRegNoEffect(int misc_reg
, const MiscReg
&val
, ThreadID tid
)
1387 isa
[tid
].setMiscRegNoEffect(misc_reg
, val
);
1391 InOrderCPU::setMiscReg(int misc_reg
, const MiscReg
&val
, ThreadID tid
)
1393 isa
[tid
].setMiscReg(misc_reg
, val
, tcBase(tid
));
1398 InOrderCPU::addInst(DynInstPtr inst
)
1400 ThreadID tid
= inst
->readTid();
1402 instList
[tid
].push_back(inst
);
1404 return --(instList
[tid
].end());
1408 InOrderCPU::findInst(InstSeqNum seq_num
, ThreadID tid
)
1410 ListIt it
= instList
[tid
].begin();
1411 ListIt end
= instList
[tid
].end();
1414 if ((*it
)->seqNum
== seq_num
)
1416 else if ((*it
)->seqNum
> seq_num
)
1422 return instList
[tid
].end();
1426 InOrderCPU::updateContextSwitchStats()
1428 // Set Average Stat Here, then reset to 0
1429 instsPerCtxtSwitch
= instsPerSwitch
;
1435 InOrderCPU::instDone(DynInstPtr inst
, ThreadID tid
)
1437 // Set the nextPC to be fetched if this is the last instruction
1440 // This contributes to the precise state of the CPU
1441 // which can be used when restoring a thread to the CPU after after any
1442 // type of context switching activity (fork, exception, etc.)
1443 TheISA::PCState comm_pc
= inst
->pcState();
1444 lastCommittedPC
[tid
] = comm_pc
;
1445 TheISA::advancePC(comm_pc
, inst
->staticInst
);
1446 pcState(comm_pc
, tid
);
1448 //@todo: may be unnecessary with new-ISA-specific branch handling code
1449 if (inst
->isControl()) {
1450 thread
[tid
]->lastGradIsBranch
= true;
1451 thread
[tid
]->lastBranchPC
= inst
->pcState();
1452 TheISA::advancePC(thread
[tid
]->lastBranchPC
, inst
->staticInst
);
1454 thread
[tid
]->lastGradIsBranch
= false;
1458 // Finalize Trace Data For Instruction
1459 if (inst
->traceData
) {
1460 //inst->traceData->setCycle(curTick());
1461 inst
->traceData
->setFetchSeq(inst
->seqNum
);
1462 //inst->traceData->setCPSeq(cpu->tcBase(tid)->numInst);
1463 inst
->traceData
->dump();
1464 delete inst
->traceData
;
1465 inst
->traceData
= NULL
;
1468 // Increment active thread's instruction count
1471 // Increment thread-state's instruction count
1472 thread
[tid
]->numInst
++;
1473 thread
[tid
]->numOp
++;
1475 // Increment thread-state's instruction stats
1476 thread
[tid
]->numInsts
++;
1477 thread
[tid
]->numOps
++;
1479 // Count committed insts per thread stats
1480 if (!inst
->isMicroop() || inst
->isLastMicroop()) {
1481 committedInsts
[tid
]++;
1483 // Count total insts committed stat
1484 totalCommittedInsts
++;
1487 committedOps
[tid
]++;
1489 // Count SMT-committed insts per thread stat
1490 if (numActiveThreads() > 1) {
1491 if (!inst
->isMicroop() || inst
->isLastMicroop())
1492 smtCommittedInsts
[tid
]++;
1495 // Instruction-Mix Stats
1496 if (inst
->isLoad()) {
1498 } else if (inst
->isStore()) {
1500 } else if (inst
->isControl()) {
1502 } else if (inst
->isNop()) {
1504 } else if (inst
->isNonSpeculative()) {
1506 } else if (inst
->isInteger()) {
1508 } else if (inst
->isFloating()) {
1512 // Check for instruction-count-based events.
1513 comInstEventQueue
[tid
]->serviceEvents(thread
[tid
]->numOp
);
1515 // Finally, remove instruction from CPU
1519 // currently unused function, but substitute repetitive code w/this function
1522 InOrderCPU::addToRemoveList(DynInstPtr inst
)
1524 removeInstsThisCycle
= true;
1525 if (!inst
->isRemoveList()) {
1526 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1527 "[sn:%lli] to remove list\n",
1528 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1529 inst
->setRemoveList();
1530 removeList
.push(inst
->getInstListIt());
1532 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i] PC %s "
1533 "[sn:%lli], already remove list\n",
1534 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1540 InOrderCPU::removeInst(DynInstPtr inst
)
1542 DPRINTF(InOrderCPU
, "Removing graduated instruction [tid:%i] PC %s "
1544 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1546 removeInstsThisCycle
= true;
1548 // Remove the instruction.
1549 if (!inst
->isRemoveList()) {
1550 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1551 "[sn:%lli] to remove list\n",
1552 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1553 inst
->setRemoveList();
1554 removeList
.push(inst
->getInstListIt());
1556 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i] PC %s "
1557 "[sn:%lli], already on remove list\n",
1558 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1564 InOrderCPU::removeInstsUntil(const InstSeqNum
&seq_num
, ThreadID tid
)
1566 //assert(!instList[tid].empty());
1568 removeInstsThisCycle
= true;
1570 ListIt inst_iter
= instList
[tid
].end();
1574 DPRINTF(InOrderCPU
, "Squashing instructions from CPU instruction "
1575 "list that are from [tid:%i] and above [sn:%lli] (end=%lli).\n",
1576 tid
, seq_num
, (*inst_iter
)->seqNum
);
1578 while ((*inst_iter
)->seqNum
> seq_num
) {
1580 bool break_loop
= (inst_iter
== instList
[tid
].begin());
1582 squashInstIt(inst_iter
, tid
);
1593 InOrderCPU::squashInstIt(const ListIt inst_it
, ThreadID tid
)
1595 DynInstPtr inst
= (*inst_it
);
1596 if (inst
->threadNumber
== tid
) {
1597 DPRINTF(InOrderCPU
, "Squashing instruction, "
1598 "[tid:%i] [sn:%lli] PC %s\n",
1603 inst
->setSquashed();
1604 archRegDepMap
[tid
].remove(inst
);
1606 if (!inst
->isRemoveList()) {
1607 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1608 "[sn:%lli] to remove list\n",
1609 inst
->threadNumber
, inst
->pcState(),
1611 inst
->setRemoveList();
1612 removeList
.push(inst_it
);
1614 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i]"
1615 " PC %s [sn:%lli], already on remove list\n",
1616 inst
->threadNumber
, inst
->pcState(),
1626 InOrderCPU::cleanUpRemovedInsts()
1628 while (!removeList
.empty()) {
1629 DPRINTF(InOrderCPU
, "Removing instruction, "
1630 "[tid:%i] [sn:%lli] PC %s\n",
1631 (*removeList
.front())->threadNumber
,
1632 (*removeList
.front())->seqNum
,
1633 (*removeList
.front())->pcState());
1635 DynInstPtr inst
= *removeList
.front();
1636 ThreadID tid
= inst
->threadNumber
;
1638 // Remove From Register Dependency Map, If Necessary
1639 // archRegDepMap[tid].remove(inst);
1641 // Clear if Non-Speculative
1642 if (inst
->staticInst
&&
1643 inst
->seqNum
== nonSpecSeqNum
[tid
] &&
1644 nonSpecInstActive
[tid
] == true) {
1645 nonSpecInstActive
[tid
] = false;
1648 inst
->onInstList
= false;
1650 instList
[tid
].erase(removeList
.front());
1655 removeInstsThisCycle
= false;
1659 InOrderCPU::cleanUpRemovedEvents()
1661 while (!cpuEventRemoveList
.empty()) {
1662 Event
*cpu_event
= cpuEventRemoveList
.front();
1663 cpuEventRemoveList
.pop();
1670 InOrderCPU::dumpInsts()
1674 ListIt inst_list_it
= instList
[0].begin();
1676 cprintf("Dumping Instruction List\n");
1678 while (inst_list_it
!= instList
[0].end()) {
1679 cprintf("Instruction:%i\nPC:%s\n[tid:%i]\n[sn:%lli]\nIssued:%i\n"
1681 num
, (*inst_list_it
)->pcState(),
1682 (*inst_list_it
)->threadNumber
,
1683 (*inst_list_it
)->seqNum
, (*inst_list_it
)->isIssued(),
1684 (*inst_list_it
)->isSquashed());
1691 InOrderCPU::wakeCPU()
1693 if (/*activityRec.active() || */tickEvent
.scheduled()) {
1694 DPRINTF(Activity
, "CPU already running.\n");
1698 DPRINTF(Activity
, "Waking up CPU\n");
1700 Tick extra_cycles
= tickToCycles((curTick() - 1) - lastRunningCycle
);
1702 idleCycles
+= extra_cycles
;
1703 for (int stage_num
= 0; stage_num
< NumStages
; stage_num
++) {
1704 pipelineStage
[stage_num
]->idleCycles
+= extra_cycles
;
1707 numCycles
+= extra_cycles
;
1709 schedule(&tickEvent
, nextCycle(curTick()));
1712 // Lots of copied full system code...place into BaseCPU class?
1714 InOrderCPU::wakeup()
1716 if (thread
[0]->status() != ThreadContext::Suspended
)
1721 DPRINTF(Quiesce
, "Suspended Processor woken\n");
1722 threadContexts
[0]->activate();
1726 InOrderCPU::syscallContext(Fault fault
, ThreadID tid
, DynInstPtr inst
, int delay
)
1728 // Syscall must be non-speculative, so squash from last stage
1729 unsigned squash_stage
= NumStages
- 1;
1730 inst
->setSquashInfo(squash_stage
);
1732 // Squash In Pipeline Stage
1733 pipelineStage
[squash_stage
]->setupSquash(inst
, tid
);
1735 // Schedule Squash Through-out Resource Pool
1736 resPool
->scheduleEvent(
1737 (InOrderCPU::CPUEventType
)ResourcePool::SquashAll
, inst
, 0);
1738 scheduleCpuEvent(Syscall
, fault
, tid
, inst
, delay
, Syscall_Pri
);
1742 InOrderCPU::syscall(int64_t callnum
, ThreadID tid
)
1744 DPRINTF(InOrderCPU
, "[tid:%i] Executing syscall().\n\n", tid
);
1746 DPRINTF(Activity
,"Activity: syscall() called.\n");
1748 // Temporarily increase this by one to account for the syscall
1750 ++(this->thread
[tid
]->funcExeInst
);
1752 // Execute the actual syscall.
1753 this->thread
[tid
]->syscall(callnum
);
1755 // Decrease funcExeInst by one as the normal commit will handle
1757 --(this->thread
[tid
]->funcExeInst
);
1759 // Clear Non-Speculative Block Variable
1760 nonSpecInstActive
[tid
] = false;
1764 InOrderCPU::getITBPtr()
1766 CacheUnit
*itb_res
= resPool
->getInstUnit();
1767 return itb_res
->tlb();
1772 InOrderCPU::getDTBPtr()
1774 return resPool
->getDataUnit()->tlb();
1778 InOrderCPU::getDecoderPtr()
1780 return &resPool
->getInstUnit()->decoder
;
1784 InOrderCPU::read(DynInstPtr inst
, Addr addr
,
1785 uint8_t *data
, unsigned size
, unsigned flags
)
1787 return resPool
->getDataUnit()->read(inst
, addr
, data
, size
, flags
);
1791 InOrderCPU::write(DynInstPtr inst
, uint8_t *data
, unsigned size
,
1792 Addr addr
, unsigned flags
, uint64_t *write_res
)
1794 return resPool
->getDataUnit()->write(inst
, data
, size
, addr
, flags
,