2 * Copyright (c) 2012 ARM Limited
5 * The license below extends only to copyright in the software and shall
6 * not be construed as granting a license to any other intellectual
7 * property including but not limited to intellectual property relating
8 * to a hardware implementation of the functionality of the software
9 * licensed hereunder. You may use the software subject to the license
10 * terms below provided that you ensure that this notice is replicated
11 * unmodified and in its entirety in all distributions of the software,
12 * modified or unmodified, in source code or in binary form.
14 * Copyright (c) 2007 MIPS Technologies, Inc.
15 * All rights reserved.
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions are
19 * met: redistributions of source code must retain the above copyright
20 * notice, this list of conditions and the following disclaimer;
21 * redistributions in binary form must reproduce the above copyright
22 * notice, this list of conditions and the following disclaimer in the
23 * documentation and/or other materials provided with the distribution;
24 * neither the name of the copyright holders nor the names of its
25 * contributors may be used to endorse or promote products derived from
26 * this software without specific prior written permission.
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
33 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
34 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
40 * Authors: Korey Sewell
46 #include "arch/utility.hh"
47 #include "base/bigint.hh"
48 #include "config/the_isa.hh"
49 #include "cpu/inorder/resources/cache_unit.hh"
50 #include "cpu/inorder/resources/resource_list.hh"
51 #include "cpu/inorder/cpu.hh"
52 #include "cpu/inorder/first_stage.hh"
53 #include "cpu/inorder/inorder_dyn_inst.hh"
54 #include "cpu/inorder/pipeline_traits.hh"
55 #include "cpu/inorder/resource_pool.hh"
56 #include "cpu/inorder/thread_context.hh"
57 #include "cpu/inorder/thread_state.hh"
58 #include "cpu/activity.hh"
59 #include "cpu/base.hh"
60 #include "cpu/exetrace.hh"
61 #include "cpu/quiesce_event.hh"
62 #include "cpu/simple_thread.hh"
63 #include "cpu/thread_context.hh"
64 #include "debug/Activity.hh"
65 #include "debug/InOrderCPU.hh"
66 #include "debug/InOrderCachePort.hh"
67 #include "debug/Interrupt.hh"
68 #include "debug/Quiesce.hh"
69 #include "debug/RefCount.hh"
70 #include "debug/SkedCache.hh"
71 #include "params/InOrderCPU.hh"
72 #include "sim/full_system.hh"
73 #include "sim/process.hh"
74 #include "sim/stat_control.hh"
75 #include "sim/system.hh"
77 #if THE_ISA == ALPHA_ISA
78 #include "arch/alpha/osfpal.hh"
82 using namespace TheISA
;
83 using namespace ThePipeline
;
85 InOrderCPU::CachePort::CachePort(CacheUnit
*_cacheUnit
,
86 const std::string
& name
) :
87 CpuPort(_cacheUnit
->name() + name
, _cacheUnit
->cpu
),
92 InOrderCPU::CachePort::recvTimingResp(Packet
*pkt
)
95 DPRINTF(InOrderCachePort
, "Got error packet back for address: %x\n",
98 cacheUnit
->processCacheCompletion(pkt
);
104 InOrderCPU::CachePort::recvRetry()
106 cacheUnit
->recvRetry();
109 InOrderCPU::TickEvent::TickEvent(InOrderCPU
*c
)
110 : Event(CPU_Tick_Pri
), cpu(c
)
115 InOrderCPU::TickEvent::process()
122 InOrderCPU::TickEvent::description() const
124 return "InOrderCPU tick event";
127 InOrderCPU::CPUEvent::CPUEvent(InOrderCPU
*_cpu
, CPUEventType e_type
,
128 Fault fault
, ThreadID _tid
, DynInstPtr inst
,
129 CPUEventPri event_pri
)
130 : Event(event_pri
), cpu(_cpu
)
132 setEvent(e_type
, fault
, _tid
, inst
);
136 std::string
InOrderCPU::eventNames
[NumCPUEvents
] =
139 "ActivateNextReadyThread",
145 "SquashFromMemStall",
150 InOrderCPU::CPUEvent::process()
152 switch (cpuEventType
)
155 cpu
->activateThread(tid
);
156 cpu
->resPool
->activateThread(tid
);
159 case ActivateNextReadyThread
:
160 cpu
->activateNextReadyThread();
163 case DeactivateThread
:
164 cpu
->deactivateThread(tid
);
165 cpu
->resPool
->deactivateThread(tid
);
169 cpu
->haltThread(tid
);
170 cpu
->resPool
->deactivateThread(tid
);
174 cpu
->suspendThread(tid
);
175 cpu
->resPool
->suspendThread(tid
);
178 case SquashFromMemStall
:
179 cpu
->squashDueToMemStall(inst
->squashingStage
, inst
->seqNum
, tid
);
180 cpu
->resPool
->squashDueToMemStall(inst
, inst
->squashingStage
,
185 DPRINTF(InOrderCPU
, "Trapping CPU\n");
186 cpu
->trap(fault
, tid
, inst
);
187 cpu
->resPool
->trap(fault
, tid
, inst
);
188 cpu
->trapPending
[tid
] = false;
192 cpu
->syscall(inst
->syscallNum
, tid
);
193 cpu
->resPool
->trap(fault
, tid
, inst
);
197 fatal("Unrecognized Event Type %s", eventNames
[cpuEventType
]);
200 cpu
->cpuEventRemoveList
.push(this);
206 InOrderCPU::CPUEvent::description() const
208 return "InOrderCPU event";
212 InOrderCPU::CPUEvent::scheduleEvent(int delay
)
214 assert(!scheduled() || squashed());
215 cpu
->reschedule(this, cpu
->nextCycle(curTick() + cpu
->ticks(delay
)), true);
219 InOrderCPU::CPUEvent::unscheduleEvent()
225 InOrderCPU::InOrderCPU(Params
*params
)
227 cpu_id(params
->cpu_id
),
231 stageWidth(params
->stageWidth
),
232 resPool(new ResourcePool(this, params
)),
234 dataPort(resPool
->getDataUnit(), ".dcache_port"),
235 instPort(resPool
->getInstUnit(), ".icache_port"),
236 removeInstsThisCycle(false),
237 activityRec(params
->name
, NumStages
, 10, params
->activity
),
238 system(params
->system
),
244 deferRegistration(false/*params->deferRegistration*/),
245 stageTracing(params
->stageTracing
),
251 // Resize for Multithreading CPUs
252 thread
.resize(numThreads
);
254 ThreadID active_threads
= params
->workload
.size();
258 active_threads
= params
->workload
.size();
260 if (active_threads
> MaxThreads
) {
261 panic("Workload Size too large. Increase the 'MaxThreads'"
262 "in your InOrder implementation or "
263 "edit your workload size.");
267 if (active_threads
> 1) {
268 threadModel
= (InOrderCPU::ThreadModel
) params
->threadModel
;
270 if (threadModel
== SMT
) {
271 DPRINTF(InOrderCPU
, "Setting Thread Model to SMT.\n");
272 } else if (threadModel
== SwitchOnCacheMiss
) {
273 DPRINTF(InOrderCPU
, "Setting Thread Model to "
274 "Switch On Cache Miss\n");
278 threadModel
= Single
;
282 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
) {
284 lastCommittedPC
[tid
].set(0);
287 // SMT is not supported in FS mode yet.
288 assert(numThreads
== 1);
289 thread
[tid
] = new Thread(this, 0, NULL
);
291 if (tid
< (ThreadID
)params
->workload
.size()) {
292 DPRINTF(InOrderCPU
, "Workload[%i] process is %#x\n",
293 tid
, params
->workload
[tid
]->progName());
295 new Thread(this, tid
, params
->workload
[tid
]);
297 //Allocate Empty thread so M5 can use later
298 //when scheduling threads to CPU
299 Process
* dummy_proc
= params
->workload
[0];
300 thread
[tid
] = new Thread(this, tid
, dummy_proc
);
303 // Eventually set this with parameters...
307 // Setup the TC that will serve as the interface to the threads/CPU.
308 InOrderThreadContext
*tc
= new InOrderThreadContext
;
310 tc
->thread
= thread
[tid
];
312 // Setup quiesce event.
313 this->thread
[tid
]->quiesceEvent
= new EndQuiesceEvent(tc
);
315 // Give the thread the TC.
316 thread
[tid
]->tc
= tc
;
317 thread
[tid
]->setFuncExeInst(0);
318 globalSeqNum
[tid
] = 1;
320 // Add the TC to the CPU's list of TC's.
321 this->threadContexts
.push_back(tc
);
324 // Initialize TimeBuffer Stage Queues
325 for (int stNum
=0; stNum
< NumStages
- 1; stNum
++) {
326 stageQueue
[stNum
] = new StageQueue(NumStages
, NumStages
);
327 stageQueue
[stNum
]->id(stNum
);
331 // Set Up Pipeline Stages
332 for (int stNum
=0; stNum
< NumStages
; stNum
++) {
334 pipelineStage
[stNum
] = new FirstStage(params
, stNum
);
336 pipelineStage
[stNum
] = new PipelineStage(params
, stNum
);
338 pipelineStage
[stNum
]->setCPU(this);
339 pipelineStage
[stNum
]->setActiveThreads(&activeThreads
);
340 pipelineStage
[stNum
]->setTimeBuffer(&timeBuffer
);
342 // Take Care of 1st/Nth stages
344 pipelineStage
[stNum
]->setPrevStageQueue(stageQueue
[stNum
- 1]);
345 if (stNum
< NumStages
- 1)
346 pipelineStage
[stNum
]->setNextStageQueue(stageQueue
[stNum
]);
349 // Initialize thread specific variables
350 for (ThreadID tid
= 0; tid
< numThreads
; tid
++) {
351 archRegDepMap
[tid
].setCPU(this);
353 nonSpecInstActive
[tid
] = false;
354 nonSpecSeqNum
[tid
] = 0;
356 squashSeqNum
[tid
] = MaxAddr
;
357 lastSquashCycle
[tid
] = 0;
359 memset(intRegs
[tid
], 0, sizeof(intRegs
[tid
]));
360 memset(floatRegs
.i
[tid
], 0, sizeof(floatRegs
.i
[tid
]));
363 // Define dummy instructions and resource requests to be used.
364 dummyInst
[tid
] = new InOrderDynInst(this,
370 dummyReq
[tid
] = new ResourceRequest(resPool
->getResource(0));
374 // Use this dummy inst to force squashing behind every instruction
376 dummyTrapInst
[tid
] = new InOrderDynInst(this, NULL
, 0, 0, 0);
377 dummyTrapInst
[tid
]->seqNum
= 0;
378 dummyTrapInst
[tid
]->squashSeqNum
= 0;
379 dummyTrapInst
[tid
]->setTid(tid
);
382 trapPending
[tid
] = false;
386 // InOrderCPU always requires an interrupt controller.
387 if (!params
->defer_registration
&& !interrupts
) {
388 fatal("InOrderCPU %s has no interrupt controller.\n"
389 "Ensure createInterruptController() is called.\n", name());
392 dummyReqInst
= new InOrderDynInst(this, NULL
, 0, 0, 0);
393 dummyReqInst
->setSquashed();
394 dummyReqInst
->resetInstCount();
396 dummyBufferInst
= new InOrderDynInst(this, NULL
, 0, 0, 0);
397 dummyBufferInst
->setSquashed();
398 dummyBufferInst
->resetInstCount();
400 endOfSkedIt
= skedCache
.end();
401 frontEndSked
= createFrontEndSked();
402 faultSked
= createFaultSked();
404 lastRunningCycle
= curTick();
409 // Schedule First Tick Event, CPU will reschedule itself from here on out.
410 scheduleTickEvent(0);
413 InOrderCPU::~InOrderCPU()
417 SkedCacheIt sked_it
= skedCache
.begin();
418 SkedCacheIt sked_end
= skedCache
.end();
420 while (sked_it
!= sked_end
) {
421 delete (*sked_it
).second
;
427 m5::hash_map
<InOrderCPU::SkedID
, ThePipeline::RSkedPtr
> InOrderCPU::skedCache
;
430 InOrderCPU::createFrontEndSked()
432 RSkedPtr res_sked
= new ResourceSked();
434 StageScheduler
F(res_sked
, stage_num
++);
435 StageScheduler
D(res_sked
, stage_num
++);
438 F
.needs(FetchSeq
, FetchSeqUnit::AssignNextPC
);
439 F
.needs(ICache
, FetchUnit::InitiateFetch
);
442 D
.needs(ICache
, FetchUnit::CompleteFetch
);
443 D
.needs(Decode
, DecodeUnit::DecodeInst
);
444 D
.needs(BPred
, BranchPredictor::PredictBranch
);
445 D
.needs(FetchSeq
, FetchSeqUnit::UpdateTargetPC
);
448 DPRINTF(SkedCache
, "Resource Sked created for instruction Front End\n");
454 InOrderCPU::createFaultSked()
456 RSkedPtr res_sked
= new ResourceSked();
457 StageScheduler
W(res_sked
, NumStages
- 1);
458 W
.needs(Grad
, GraduationUnit::CheckFault
);
459 DPRINTF(SkedCache
, "Resource Sked created for instruction Faults\n");
464 InOrderCPU::createBackEndSked(DynInstPtr inst
)
466 RSkedPtr res_sked
= lookupSked(inst
);
467 if (res_sked
!= NULL
) {
468 DPRINTF(SkedCache
, "Found %s in sked cache.\n",
472 res_sked
= new ResourceSked();
475 int stage_num
= ThePipeline::BackEndStartStage
;
476 StageScheduler
X(res_sked
, stage_num
++);
477 StageScheduler
M(res_sked
, stage_num
++);
478 StageScheduler
W(res_sked
, stage_num
++);
480 if (!inst
->staticInst
) {
481 warn_once("Static Instruction Object Not Set. Can't Create"
482 " Back End Schedule");
487 X
.needs(RegManager
, UseDefUnit::MarkDestRegs
);
488 for (int idx
=0; idx
< inst
->numSrcRegs(); idx
++) {
489 if (!idx
|| !inst
->isStore()) {
490 X
.needs(RegManager
, UseDefUnit::ReadSrcReg
, idx
);
494 //@todo: schedule non-spec insts to operate on this cycle
495 // as long as all previous insts are done
496 if ( inst
->isNonSpeculative() ) {
497 // skip execution of non speculative insts until later
498 } else if ( inst
->isMemRef() ) {
499 if ( inst
->isLoad() ) {
500 X
.needs(AGEN
, AGENUnit::GenerateAddr
);
502 } else if (inst
->opClass() == IntMultOp
|| inst
->opClass() == IntDivOp
) {
503 X
.needs(MDU
, MultDivUnit::StartMultDiv
);
505 X
.needs(ExecUnit
, ExecutionUnit::ExecuteInst
);
509 if (!inst
->isNonSpeculative()) {
510 if (inst
->opClass() == IntMultOp
|| inst
->opClass() == IntDivOp
) {
511 M
.needs(MDU
, MultDivUnit::EndMultDiv
);
514 if ( inst
->isLoad() ) {
515 M
.needs(DCache
, CacheUnit::InitiateReadData
);
517 M
.needs(DCache
, CacheUnit::InitSecondSplitRead
);
518 } else if ( inst
->isStore() ) {
519 for (int i
= 1; i
< inst
->numSrcRegs(); i
++ ) {
520 M
.needs(RegManager
, UseDefUnit::ReadSrcReg
, i
);
522 M
.needs(AGEN
, AGENUnit::GenerateAddr
);
523 M
.needs(DCache
, CacheUnit::InitiateWriteData
);
525 M
.needs(DCache
, CacheUnit::InitSecondSplitWrite
);
530 if (!inst
->isNonSpeculative()) {
531 if ( inst
->isLoad() ) {
532 W
.needs(DCache
, CacheUnit::CompleteReadData
);
534 W
.needs(DCache
, CacheUnit::CompleteSecondSplitRead
);
535 } else if ( inst
->isStore() ) {
536 W
.needs(DCache
, CacheUnit::CompleteWriteData
);
538 W
.needs(DCache
, CacheUnit::CompleteSecondSplitWrite
);
541 // Finally, Execute Speculative Data
542 if (inst
->isMemRef()) {
543 if (inst
->isLoad()) {
544 W
.needs(AGEN
, AGENUnit::GenerateAddr
);
545 W
.needs(DCache
, CacheUnit::InitiateReadData
);
547 W
.needs(DCache
, CacheUnit::InitSecondSplitRead
);
548 W
.needs(DCache
, CacheUnit::CompleteReadData
);
550 W
.needs(DCache
, CacheUnit::CompleteSecondSplitRead
);
551 } else if (inst
->isStore()) {
552 if ( inst
->numSrcRegs() >= 2 ) {
553 W
.needs(RegManager
, UseDefUnit::ReadSrcReg
, 1);
555 W
.needs(AGEN
, AGENUnit::GenerateAddr
);
556 W
.needs(DCache
, CacheUnit::InitiateWriteData
);
558 W
.needs(DCache
, CacheUnit::InitSecondSplitWrite
);
559 W
.needs(DCache
, CacheUnit::CompleteWriteData
);
561 W
.needs(DCache
, CacheUnit::CompleteSecondSplitWrite
);
564 W
.needs(ExecUnit
, ExecutionUnit::ExecuteInst
);
568 W
.needs(Grad
, GraduationUnit::CheckFault
);
570 for (int idx
=0; idx
< inst
->numDestRegs(); idx
++) {
571 W
.needs(RegManager
, UseDefUnit::WriteDestReg
, idx
);
574 if (inst
->isControl())
575 W
.needs(BPred
, BranchPredictor::UpdatePredictor
);
577 W
.needs(Grad
, GraduationUnit::GraduateInst
);
579 // Insert Back Schedule into our cache of
580 // resource schedules
581 addToSkedCache(inst
, res_sked
);
583 DPRINTF(SkedCache
, "Back End Sked Created for instruction: %s (%08p)\n",
584 inst
->instName(), inst
->getMachInst());
591 InOrderCPU::regStats()
593 /* Register the Resource Pool's stats here.*/
596 /* Register for each Pipeline Stage */
597 for (int stage_num
=0; stage_num
< ThePipeline::NumStages
; stage_num
++) {
598 pipelineStage
[stage_num
]->regStats();
601 /* Register any of the InOrderCPU's stats here.*/
603 .name(name() + ".instsPerContextSwitch")
604 .desc("Instructions Committed Per Context Switch")
605 .prereq(instsPerCtxtSwitch
);
608 .name(name() + ".contextSwitches")
609 .desc("Number of context switches");
612 .name(name() + ".comLoads")
613 .desc("Number of Load instructions committed");
616 .name(name() + ".comStores")
617 .desc("Number of Store instructions committed");
620 .name(name() + ".comBranches")
621 .desc("Number of Branches instructions committed");
624 .name(name() + ".comNops")
625 .desc("Number of Nop instructions committed");
628 .name(name() + ".comNonSpec")
629 .desc("Number of Non-Speculative instructions committed");
632 .name(name() + ".comInts")
633 .desc("Number of Integer instructions committed");
636 .name(name() + ".comFloats")
637 .desc("Number of Floating Point instructions committed");
640 .name(name() + ".timesIdled")
641 .desc("Number of times that the entire CPU went into an idle state and"
642 " unscheduled itself")
646 .name(name() + ".idleCycles")
647 .desc("Number of cycles cpu's stages were not processed");
650 .name(name() + ".runCycles")
651 .desc("Number of cycles cpu stages are processed.");
654 .name(name() + ".activity")
655 .desc("Percentage of cycles cpu is active")
657 activity
= (runCycles
/ numCycles
) * 100;
661 .name(name() + ".threadCycles")
662 .desc("Total Number of Cycles A Thread Was Active in CPU (Per-Thread)");
665 .name(name() + ".smtCycles")
666 .desc("Total number of cycles that the CPU was in SMT-mode");
670 .name(name() + ".committedInsts")
671 .desc("Number of Instructions committed (Per-Thread)");
675 .name(name() + ".committedOps")
676 .desc("Number of Ops committed (Per-Thread)");
680 .name(name() + ".smtCommittedInsts")
681 .desc("Number of SMT Instructions committed (Per-Thread)");
684 .name(name() + ".committedInsts_total")
685 .desc("Number of Instructions committed (Total)");
688 .name(name() + ".cpi")
689 .desc("CPI: Cycles Per Instruction (Per-Thread)")
691 cpi
= numCycles
/ committedInsts
;
694 .name(name() + ".smt_cpi")
695 .desc("CPI: Total SMT-CPI")
697 smtCpi
= smtCycles
/ smtCommittedInsts
;
700 .name(name() + ".cpi_total")
701 .desc("CPI: Total CPI of All Threads")
703 totalCpi
= numCycles
/ totalCommittedInsts
;
706 .name(name() + ".ipc")
707 .desc("IPC: Instructions Per Cycle (Per-Thread)")
709 ipc
= committedInsts
/ numCycles
;
712 .name(name() + ".smt_ipc")
713 .desc("IPC: Total SMT-IPC")
715 smtIpc
= smtCommittedInsts
/ smtCycles
;
718 .name(name() + ".ipc_total")
719 .desc("IPC: Total IPC of All Threads")
721 totalIpc
= totalCommittedInsts
/ numCycles
;
730 DPRINTF(InOrderCPU
, "\n\nInOrderCPU: Ticking main, InOrderCPU.\n");
734 checkForInterrupts();
736 bool pipes_idle
= true;
737 //Tick each of the stages
738 for (int stNum
=NumStages
- 1; stNum
>= 0 ; stNum
--) {
739 pipelineStage
[stNum
]->tick();
741 pipes_idle
= pipes_idle
&& pipelineStage
[stNum
]->idle
;
749 // Now advance the time buffers one tick
750 timeBuffer
.advance();
751 for (int sqNum
=0; sqNum
< NumStages
- 1; sqNum
++) {
752 stageQueue
[sqNum
]->advance();
754 activityRec
.advance();
756 // Any squashed events, or insts then remove them now
757 cleanUpRemovedEvents();
758 cleanUpRemovedInsts();
760 // Re-schedule CPU for this cycle
761 if (!tickEvent
.scheduled()) {
762 if (_status
== SwitchedOut
) {
764 lastRunningCycle
= curTick();
765 } else if (!activityRec
.active()) {
766 DPRINTF(InOrderCPU
, "sleeping CPU.\n");
767 lastRunningCycle
= curTick();
770 //Tick next_tick = curTick() + cycles(1);
771 //tickEvent.schedule(next_tick);
772 schedule(&tickEvent
, nextCycle(curTick() + 1));
773 DPRINTF(InOrderCPU
, "Scheduled CPU for next tick @ %i.\n",
774 nextCycle(curTick() + 1));
779 updateThreadPriority();
788 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
) {
789 // Set inSyscall so that the CPU doesn't squash when initially
790 // setting up registers.
791 thread
[tid
]->inSyscall
= true;
792 // Initialise the ThreadContext's memory proxies
793 thread
[tid
]->initMemProxies(thread
[tid
]->getTC());
796 if (FullSystem
&& !params()->defer_registration
) {
797 for (ThreadID tid
= 0; tid
< numThreads
; tid
++) {
798 ThreadContext
*src_tc
= threadContexts
[tid
];
799 TheISA::initCPU(src_tc
, src_tc
->contextId());
804 for (ThreadID tid
= 0; tid
< numThreads
; ++tid
)
805 thread
[tid
]->inSyscall
= false;
807 // Call Initializiation Routine for Resource Pool
812 InOrderCPU::hwrei(ThreadID tid
)
814 #if THE_ISA == ALPHA_ISA
815 // Need to clear the lock flag upon returning from an interrupt.
816 setMiscRegNoEffect(AlphaISA::MISCREG_LOCKFLAG
, false, tid
);
818 thread
[tid
]->kernelStats
->hwrei();
819 // FIXME: XXX check for interrupts? XXX
827 InOrderCPU::simPalCheck(int palFunc
, ThreadID tid
)
829 #if THE_ISA == ALPHA_ISA
830 if (this->thread
[tid
]->kernelStats
)
831 this->thread
[tid
]->kernelStats
->callpal(palFunc
,
832 this->threadContexts
[tid
]);
837 if (--System::numSystemsRunning
== 0)
838 exitSimLoop("all cpus halted");
843 if (this->system
->breakpoint())
852 InOrderCPU::checkForInterrupts()
854 for (int i
= 0; i
< threadContexts
.size(); i
++) {
855 ThreadContext
*tc
= threadContexts
[i
];
857 if (interrupts
->checkInterrupts(tc
)) {
858 Fault interrupt
= interrupts
->getInterrupt(tc
);
860 if (interrupt
!= NoFault
) {
861 DPRINTF(Interrupt
, "Processing Intterupt for [tid:%i].\n",
864 ThreadID tid
= tc
->threadId();
865 interrupts
->updateIntrInfo(tc
);
867 // Squash from Last Stage in Pipeline
868 unsigned last_stage
= NumStages
- 1;
869 dummyTrapInst
[tid
]->squashingStage
= last_stage
;
870 pipelineStage
[last_stage
]->setupSquash(dummyTrapInst
[tid
],
873 // By default, setupSquash will always squash from stage + 1
874 pipelineStage
[BackEndStartStage
- 1]->setupSquash(dummyTrapInst
[tid
],
877 // Schedule Squash Through-out Resource Pool
878 resPool
->scheduleEvent(
879 (InOrderCPU::CPUEventType
)ResourcePool::SquashAll
,
880 dummyTrapInst
[tid
], 0);
882 // Finally, Setup Trap to happen at end of cycle
883 trapContext(interrupt
, tid
, dummyTrapInst
[tid
]);
890 InOrderCPU::getInterrupts()
892 // Check if there are any outstanding interrupts
893 return interrupts
->getInterrupt(threadContexts
[0]);
897 InOrderCPU::processInterrupts(Fault interrupt
)
899 // Check for interrupts here. For now can copy the code that
900 // exists within isa_fullsys_traits.hh. Also assume that thread 0
901 // is the one that handles the interrupts.
902 // @todo: Possibly consolidate the interrupt checking code.
903 // @todo: Allow other threads to handle interrupts.
905 assert(interrupt
!= NoFault
);
906 interrupts
->updateIntrInfo(threadContexts
[0]);
908 DPRINTF(InOrderCPU
, "Interrupt %s being handled\n", interrupt
->name());
910 // Note: Context ID ok here? Impl. of FS mode needs to revisit this
911 trap(interrupt
, threadContexts
[0]->contextId(), dummyBufferInst
);
915 InOrderCPU::trapContext(Fault fault
, ThreadID tid
, DynInstPtr inst
, int delay
)
917 scheduleCpuEvent(Trap
, fault
, tid
, inst
, delay
);
918 trapPending
[tid
] = true;
922 InOrderCPU::trap(Fault fault
, ThreadID tid
, DynInstPtr inst
)
924 fault
->invoke(tcBase(tid
), inst
->staticInst
);
925 removePipelineStalls(tid
);
929 InOrderCPU::squashFromMemStall(DynInstPtr inst
, ThreadID tid
, int delay
)
931 scheduleCpuEvent(SquashFromMemStall
, NoFault
, tid
, inst
, delay
);
936 InOrderCPU::squashDueToMemStall(int stage_num
, InstSeqNum seq_num
,
939 DPRINTF(InOrderCPU
, "Squashing Pipeline Stages Due to Memory Stall...\n");
941 // Squash all instructions in each stage including
942 // instruction that caused the squash (seq_num - 1)
943 // NOTE: The stage bandwidth needs to be cleared so thats why
944 // the stalling instruction is squashed as well. The stalled
945 // instruction is previously placed in another intermediate buffer
946 // while it's stall is being handled.
947 InstSeqNum squash_seq_num
= seq_num
- 1;
949 for (int stNum
=stage_num
; stNum
>= 0 ; stNum
--) {
950 pipelineStage
[stNum
]->squashDueToMemStall(squash_seq_num
, tid
);
955 InOrderCPU::scheduleCpuEvent(CPUEventType c_event
, Fault fault
,
956 ThreadID tid
, DynInstPtr inst
,
957 unsigned delay
, CPUEventPri event_pri
)
959 CPUEvent
*cpu_event
= new CPUEvent(this, c_event
, fault
, tid
, inst
,
962 Tick sked_tick
= nextCycle(curTick() + ticks(delay
));
964 DPRINTF(InOrderCPU
, "Scheduling CPU Event (%s) for cycle %i, [tid:%i].\n",
965 eventNames
[c_event
], curTick() + delay
, tid
);
966 schedule(cpu_event
, sked_tick
);
968 cpu_event
->process();
969 cpuEventRemoveList
.push(cpu_event
);
972 // Broadcast event to the Resource Pool
973 // Need to reset tid just in case this is a dummy instruction
975 resPool
->scheduleEvent(c_event
, inst
, 0, 0, tid
);
979 InOrderCPU::isThreadActive(ThreadID tid
)
981 list
<ThreadID
>::iterator isActive
=
982 std::find(activeThreads
.begin(), activeThreads
.end(), tid
);
984 return (isActive
!= activeThreads
.end());
988 InOrderCPU::isThreadReady(ThreadID tid
)
990 list
<ThreadID
>::iterator isReady
=
991 std::find(readyThreads
.begin(), readyThreads
.end(), tid
);
993 return (isReady
!= readyThreads
.end());
997 InOrderCPU::isThreadSuspended(ThreadID tid
)
999 list
<ThreadID
>::iterator isSuspended
=
1000 std::find(suspendedThreads
.begin(), suspendedThreads
.end(), tid
);
1002 return (isSuspended
!= suspendedThreads
.end());
1006 InOrderCPU::activateNextReadyThread()
1008 if (readyThreads
.size() >= 1) {
1009 ThreadID ready_tid
= readyThreads
.front();
1011 // Activate in Pipeline
1012 activateThread(ready_tid
);
1014 // Activate in Resource Pool
1015 resPool
->activateThread(ready_tid
);
1017 list
<ThreadID
>::iterator ready_it
=
1018 std::find(readyThreads
.begin(), readyThreads
.end(), ready_tid
);
1019 readyThreads
.erase(ready_it
);
1022 "Attempting to activate new thread, but No Ready Threads to"
1025 "Unable to switch to next active thread.\n");
1030 InOrderCPU::activateThread(ThreadID tid
)
1032 if (isThreadSuspended(tid
)) {
1034 "Removing [tid:%i] from suspended threads list.\n", tid
);
1036 list
<ThreadID
>::iterator susp_it
=
1037 std::find(suspendedThreads
.begin(), suspendedThreads
.end(),
1039 suspendedThreads
.erase(susp_it
);
1042 if (threadModel
== SwitchOnCacheMiss
&&
1043 numActiveThreads() == 1) {
1045 "Ignoring activation of [tid:%i], since [tid:%i] is "
1046 "already running.\n", tid
, activeThreadId());
1048 DPRINTF(InOrderCPU
,"Placing [tid:%i] on ready threads list\n",
1051 readyThreads
.push_back(tid
);
1053 } else if (!isThreadActive(tid
)) {
1055 "Adding [tid:%i] to active threads list.\n", tid
);
1056 activeThreads
.push_back(tid
);
1058 activateThreadInPipeline(tid
);
1060 thread
[tid
]->lastActivate
= curTick();
1062 tcBase(tid
)->setStatus(ThreadContext::Active
);
1071 InOrderCPU::activateThreadInPipeline(ThreadID tid
)
1073 for (int stNum
=0; stNum
< NumStages
; stNum
++) {
1074 pipelineStage
[stNum
]->activateThread(tid
);
1079 InOrderCPU::deactivateContext(ThreadID tid
, int delay
)
1081 DPRINTF(InOrderCPU
,"[tid:%i]: Deactivating ...\n", tid
);
1083 scheduleCpuEvent(DeactivateThread
, NoFault
, tid
, dummyInst
[tid
], delay
);
1085 // Be sure to signal that there's some activity so the CPU doesn't
1086 // deschedule itself.
1087 activityRec
.activity();
1093 InOrderCPU::deactivateThread(ThreadID tid
)
1095 DPRINTF(InOrderCPU
, "[tid:%i]: Calling deactivate thread.\n", tid
);
1097 if (isThreadActive(tid
)) {
1098 DPRINTF(InOrderCPU
,"[tid:%i]: Removing from active threads list\n",
1100 list
<ThreadID
>::iterator thread_it
=
1101 std::find(activeThreads
.begin(), activeThreads
.end(), tid
);
1103 removePipelineStalls(*thread_it
);
1105 activeThreads
.erase(thread_it
);
1107 // Ideally, this should be triggered from the
1108 // suspendContext/Thread functions
1109 tcBase(tid
)->setStatus(ThreadContext::Suspended
);
1112 assert(!isThreadActive(tid
));
1116 InOrderCPU::removePipelineStalls(ThreadID tid
)
1118 DPRINTF(InOrderCPU
,"[tid:%i]: Removing all pipeline stalls\n",
1121 for (int stNum
= 0; stNum
< NumStages
; stNum
++) {
1122 pipelineStage
[stNum
]->removeStalls(tid
);
1128 InOrderCPU::updateThreadPriority()
1130 if (activeThreads
.size() > 1)
1132 //DEFAULT TO ROUND ROBIN SCHEME
1133 //e.g. Move highest priority to end of thread list
1134 list
<ThreadID
>::iterator list_begin
= activeThreads
.begin();
1136 unsigned high_thread
= *list_begin
;
1138 activeThreads
.erase(list_begin
);
1140 activeThreads
.push_back(high_thread
);
1145 InOrderCPU::tickThreadStats()
1147 /** Keep track of cycles that each thread is active */
1148 list
<ThreadID
>::iterator thread_it
= activeThreads
.begin();
1149 while (thread_it
!= activeThreads
.end()) {
1150 threadCycles
[*thread_it
]++;
1154 // Keep track of cycles where SMT is active
1155 if (activeThreads
.size() > 1) {
1161 InOrderCPU::activateContext(ThreadID tid
, int delay
)
1163 DPRINTF(InOrderCPU
,"[tid:%i]: Activating ...\n", tid
);
1166 scheduleCpuEvent(ActivateThread
, NoFault
, tid
, dummyInst
[tid
], delay
);
1168 // Be sure to signal that there's some activity so the CPU doesn't
1169 // deschedule itself.
1170 activityRec
.activity();
1176 InOrderCPU::activateNextReadyContext(int delay
)
1178 DPRINTF(InOrderCPU
,"Activating next ready thread\n");
1180 scheduleCpuEvent(ActivateNextReadyThread
, NoFault
, 0/*tid*/, dummyInst
[0],
1181 delay
, ActivateNextReadyThread_Pri
);
1183 // Be sure to signal that there's some activity so the CPU doesn't
1184 // deschedule itself.
1185 activityRec
.activity();
1191 InOrderCPU::haltContext(ThreadID tid
)
1193 DPRINTF(InOrderCPU
, "[tid:%i]: Calling Halt Context...\n", tid
);
1195 scheduleCpuEvent(HaltThread
, NoFault
, tid
, dummyInst
[tid
]);
1197 activityRec
.activity();
1201 InOrderCPU::haltThread(ThreadID tid
)
1203 DPRINTF(InOrderCPU
, "[tid:%i]: Placing on Halted Threads List...\n", tid
);
1204 deactivateThread(tid
);
1205 squashThreadInPipeline(tid
);
1206 haltedThreads
.push_back(tid
);
1208 tcBase(tid
)->setStatus(ThreadContext::Halted
);
1210 if (threadModel
== SwitchOnCacheMiss
) {
1211 activateNextReadyContext();
1216 InOrderCPU::suspendContext(ThreadID tid
)
1218 scheduleCpuEvent(SuspendThread
, NoFault
, tid
, dummyInst
[tid
]);
1222 InOrderCPU::suspendThread(ThreadID tid
)
1224 DPRINTF(InOrderCPU
, "[tid:%i]: Placing on Suspended Threads List...\n",
1226 deactivateThread(tid
);
1227 suspendedThreads
.push_back(tid
);
1228 thread
[tid
]->lastSuspend
= curTick();
1230 tcBase(tid
)->setStatus(ThreadContext::Suspended
);
1234 InOrderCPU::squashThreadInPipeline(ThreadID tid
)
1236 //Squash all instructions in each stage
1237 for (int stNum
=NumStages
- 1; stNum
>= 0 ; stNum
--) {
1238 pipelineStage
[stNum
]->squash(0 /*seq_num*/, tid
);
1243 InOrderCPU::getPipeStage(int stage_num
)
1245 return pipelineStage
[stage_num
];
1250 InOrderCPU::flattenRegIdx(RegIndex reg_idx
, RegType
®_type
, ThreadID tid
)
1252 if (reg_idx
< FP_Base_DepTag
) {
1254 return isa
[tid
].flattenIntIndex(reg_idx
);
1255 } else if (reg_idx
< Ctrl_Base_DepTag
) {
1256 reg_type
= FloatType
;
1257 reg_idx
-= FP_Base_DepTag
;
1258 return isa
[tid
].flattenFloatIndex(reg_idx
);
1260 reg_type
= MiscType
;
1261 return reg_idx
- TheISA::Ctrl_Base_DepTag
;
1266 InOrderCPU::readIntReg(RegIndex reg_idx
, ThreadID tid
)
1268 DPRINTF(IntRegs
, "[tid:%i]: Reading Int. Reg %i as %x\n",
1269 tid
, reg_idx
, intRegs
[tid
][reg_idx
]);
1271 return intRegs
[tid
][reg_idx
];
1275 InOrderCPU::readFloatReg(RegIndex reg_idx
, ThreadID tid
)
1277 DPRINTF(FloatRegs
, "[tid:%i]: Reading Float Reg %i as %x, %08f\n",
1278 tid
, reg_idx
, floatRegs
.i
[tid
][reg_idx
], floatRegs
.f
[tid
][reg_idx
]);
1280 return floatRegs
.f
[tid
][reg_idx
];
1284 InOrderCPU::readFloatRegBits(RegIndex reg_idx
, ThreadID tid
)
1286 DPRINTF(FloatRegs
, "[tid:%i]: Reading Float Reg %i as %x, %08f\n",
1287 tid
, reg_idx
, floatRegs
.i
[tid
][reg_idx
], floatRegs
.f
[tid
][reg_idx
]);
1289 return floatRegs
.i
[tid
][reg_idx
];
1293 InOrderCPU::setIntReg(RegIndex reg_idx
, uint64_t val
, ThreadID tid
)
1295 if (reg_idx
== TheISA::ZeroReg
) {
1296 DPRINTF(IntRegs
, "[tid:%i]: Ignoring Setting of ISA-ZeroReg "
1297 "(Int. Reg %i) to %x\n", tid
, reg_idx
, val
);
1300 DPRINTF(IntRegs
, "[tid:%i]: Setting Int. Reg %i to %x\n",
1303 intRegs
[tid
][reg_idx
] = val
;
1309 InOrderCPU::setFloatReg(RegIndex reg_idx
, FloatReg val
, ThreadID tid
)
1311 floatRegs
.f
[tid
][reg_idx
] = val
;
1312 DPRINTF(FloatRegs
, "[tid:%i]: Setting Float. Reg %i bits to "
1315 floatRegs
.i
[tid
][reg_idx
],
1316 floatRegs
.f
[tid
][reg_idx
]);
1321 InOrderCPU::setFloatRegBits(RegIndex reg_idx
, FloatRegBits val
, ThreadID tid
)
1323 floatRegs
.i
[tid
][reg_idx
] = val
;
1324 DPRINTF(FloatRegs
, "[tid:%i]: Setting Float. Reg %i bits to "
1327 floatRegs
.i
[tid
][reg_idx
],
1328 floatRegs
.f
[tid
][reg_idx
]);
1332 InOrderCPU::readRegOtherThread(unsigned reg_idx
, ThreadID tid
)
1334 // If Default value is set, then retrieve target thread
1335 if (tid
== InvalidThreadID
) {
1336 tid
= TheISA::getTargetThread(tcBase(tid
));
1339 if (reg_idx
< FP_Base_DepTag
) {
1340 // Integer Register File
1341 return readIntReg(reg_idx
, tid
);
1342 } else if (reg_idx
< Ctrl_Base_DepTag
) {
1343 // Float Register File
1344 reg_idx
-= FP_Base_DepTag
;
1345 return readFloatRegBits(reg_idx
, tid
);
1347 reg_idx
-= Ctrl_Base_DepTag
;
1348 return readMiscReg(reg_idx
, tid
); // Misc. Register File
1352 InOrderCPU::setRegOtherThread(unsigned reg_idx
, const MiscReg
&val
,
1355 // If Default value is set, then retrieve target thread
1356 if (tid
== InvalidThreadID
) {
1357 tid
= TheISA::getTargetThread(tcBase(tid
));
1360 if (reg_idx
< FP_Base_DepTag
) { // Integer Register File
1361 setIntReg(reg_idx
, val
, tid
);
1362 } else if (reg_idx
< Ctrl_Base_DepTag
) { // Float Register File
1363 reg_idx
-= FP_Base_DepTag
;
1364 setFloatRegBits(reg_idx
, val
, tid
);
1366 reg_idx
-= Ctrl_Base_DepTag
;
1367 setMiscReg(reg_idx
, val
, tid
); // Misc. Register File
1372 InOrderCPU::readMiscRegNoEffect(int misc_reg
, ThreadID tid
)
1374 return isa
[tid
].readMiscRegNoEffect(misc_reg
);
1378 InOrderCPU::readMiscReg(int misc_reg
, ThreadID tid
)
1380 return isa
[tid
].readMiscReg(misc_reg
, tcBase(tid
));
1384 InOrderCPU::setMiscRegNoEffect(int misc_reg
, const MiscReg
&val
, ThreadID tid
)
1386 isa
[tid
].setMiscRegNoEffect(misc_reg
, val
);
1390 InOrderCPU::setMiscReg(int misc_reg
, const MiscReg
&val
, ThreadID tid
)
1392 isa
[tid
].setMiscReg(misc_reg
, val
, tcBase(tid
));
1397 InOrderCPU::addInst(DynInstPtr inst
)
1399 ThreadID tid
= inst
->readTid();
1401 instList
[tid
].push_back(inst
);
1403 return --(instList
[tid
].end());
1407 InOrderCPU::findInst(InstSeqNum seq_num
, ThreadID tid
)
1409 ListIt it
= instList
[tid
].begin();
1410 ListIt end
= instList
[tid
].end();
1413 if ((*it
)->seqNum
== seq_num
)
1415 else if ((*it
)->seqNum
> seq_num
)
1421 return instList
[tid
].end();
1425 InOrderCPU::updateContextSwitchStats()
1427 // Set Average Stat Here, then reset to 0
1428 instsPerCtxtSwitch
= instsPerSwitch
;
1434 InOrderCPU::instDone(DynInstPtr inst
, ThreadID tid
)
1436 // Set the nextPC to be fetched if this is the last instruction
1439 // This contributes to the precise state of the CPU
1440 // which can be used when restoring a thread to the CPU after after any
1441 // type of context switching activity (fork, exception, etc.)
1442 TheISA::PCState comm_pc
= inst
->pcState();
1443 lastCommittedPC
[tid
] = comm_pc
;
1444 TheISA::advancePC(comm_pc
, inst
->staticInst
);
1445 pcState(comm_pc
, tid
);
1447 //@todo: may be unnecessary with new-ISA-specific branch handling code
1448 if (inst
->isControl()) {
1449 thread
[tid
]->lastGradIsBranch
= true;
1450 thread
[tid
]->lastBranchPC
= inst
->pcState();
1451 TheISA::advancePC(thread
[tid
]->lastBranchPC
, inst
->staticInst
);
1453 thread
[tid
]->lastGradIsBranch
= false;
1457 // Finalize Trace Data For Instruction
1458 if (inst
->traceData
) {
1459 //inst->traceData->setCycle(curTick());
1460 inst
->traceData
->setFetchSeq(inst
->seqNum
);
1461 //inst->traceData->setCPSeq(cpu->tcBase(tid)->numInst);
1462 inst
->traceData
->dump();
1463 delete inst
->traceData
;
1464 inst
->traceData
= NULL
;
1467 // Increment active thread's instruction count
1470 // Increment thread-state's instruction count
1471 thread
[tid
]->numInst
++;
1472 thread
[tid
]->numOp
++;
1474 // Increment thread-state's instruction stats
1475 thread
[tid
]->numInsts
++;
1476 thread
[tid
]->numOps
++;
1478 // Count committed insts per thread stats
1479 if (!inst
->isMicroop() || inst
->isLastMicroop()) {
1480 committedInsts
[tid
]++;
1482 // Count total insts committed stat
1483 totalCommittedInsts
++;
1486 committedOps
[tid
]++;
1488 // Count SMT-committed insts per thread stat
1489 if (numActiveThreads() > 1) {
1490 if (!inst
->isMicroop() || inst
->isLastMicroop())
1491 smtCommittedInsts
[tid
]++;
1494 // Instruction-Mix Stats
1495 if (inst
->isLoad()) {
1497 } else if (inst
->isStore()) {
1499 } else if (inst
->isControl()) {
1501 } else if (inst
->isNop()) {
1503 } else if (inst
->isNonSpeculative()) {
1505 } else if (inst
->isInteger()) {
1507 } else if (inst
->isFloating()) {
1511 // Check for instruction-count-based events.
1512 comInstEventQueue
[tid
]->serviceEvents(thread
[tid
]->numOp
);
1514 // Finally, remove instruction from CPU
1518 // currently unused function, but substitute repetitive code w/this function
1521 InOrderCPU::addToRemoveList(DynInstPtr inst
)
1523 removeInstsThisCycle
= true;
1524 if (!inst
->isRemoveList()) {
1525 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1526 "[sn:%lli] to remove list\n",
1527 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1528 inst
->setRemoveList();
1529 removeList
.push(inst
->getInstListIt());
1531 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i] PC %s "
1532 "[sn:%lli], already remove list\n",
1533 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1539 InOrderCPU::removeInst(DynInstPtr inst
)
1541 DPRINTF(InOrderCPU
, "Removing graduated instruction [tid:%i] PC %s "
1543 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1545 removeInstsThisCycle
= true;
1547 // Remove the instruction.
1548 if (!inst
->isRemoveList()) {
1549 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1550 "[sn:%lli] to remove list\n",
1551 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1552 inst
->setRemoveList();
1553 removeList
.push(inst
->getInstListIt());
1555 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i] PC %s "
1556 "[sn:%lli], already on remove list\n",
1557 inst
->threadNumber
, inst
->pcState(), inst
->seqNum
);
1563 InOrderCPU::removeInstsUntil(const InstSeqNum
&seq_num
, ThreadID tid
)
1565 //assert(!instList[tid].empty());
1567 removeInstsThisCycle
= true;
1569 ListIt inst_iter
= instList
[tid
].end();
1573 DPRINTF(InOrderCPU
, "Squashing instructions from CPU instruction "
1574 "list that are from [tid:%i] and above [sn:%lli] (end=%lli).\n",
1575 tid
, seq_num
, (*inst_iter
)->seqNum
);
1577 while ((*inst_iter
)->seqNum
> seq_num
) {
1579 bool break_loop
= (inst_iter
== instList
[tid
].begin());
1581 squashInstIt(inst_iter
, tid
);
1592 InOrderCPU::squashInstIt(const ListIt inst_it
, ThreadID tid
)
1594 DynInstPtr inst
= (*inst_it
);
1595 if (inst
->threadNumber
== tid
) {
1596 DPRINTF(InOrderCPU
, "Squashing instruction, "
1597 "[tid:%i] [sn:%lli] PC %s\n",
1602 inst
->setSquashed();
1603 archRegDepMap
[tid
].remove(inst
);
1605 if (!inst
->isRemoveList()) {
1606 DPRINTF(InOrderCPU
, "Pushing instruction [tid:%i] PC %s "
1607 "[sn:%lli] to remove list\n",
1608 inst
->threadNumber
, inst
->pcState(),
1610 inst
->setRemoveList();
1611 removeList
.push(inst_it
);
1613 DPRINTF(InOrderCPU
, "Ignoring instruction removal for [tid:%i]"
1614 " PC %s [sn:%lli], already on remove list\n",
1615 inst
->threadNumber
, inst
->pcState(),
1625 InOrderCPU::cleanUpRemovedInsts()
1627 while (!removeList
.empty()) {
1628 DPRINTF(InOrderCPU
, "Removing instruction, "
1629 "[tid:%i] [sn:%lli] PC %s\n",
1630 (*removeList
.front())->threadNumber
,
1631 (*removeList
.front())->seqNum
,
1632 (*removeList
.front())->pcState());
1634 DynInstPtr inst
= *removeList
.front();
1635 ThreadID tid
= inst
->threadNumber
;
1637 // Remove From Register Dependency Map, If Necessary
1638 // archRegDepMap[tid].remove(inst);
1640 // Clear if Non-Speculative
1641 if (inst
->staticInst
&&
1642 inst
->seqNum
== nonSpecSeqNum
[tid
] &&
1643 nonSpecInstActive
[tid
] == true) {
1644 nonSpecInstActive
[tid
] = false;
1647 inst
->onInstList
= false;
1649 instList
[tid
].erase(removeList
.front());
1654 removeInstsThisCycle
= false;
1658 InOrderCPU::cleanUpRemovedEvents()
1660 while (!cpuEventRemoveList
.empty()) {
1661 Event
*cpu_event
= cpuEventRemoveList
.front();
1662 cpuEventRemoveList
.pop();
1669 InOrderCPU::dumpInsts()
1673 ListIt inst_list_it
= instList
[0].begin();
1675 cprintf("Dumping Instruction List\n");
1677 while (inst_list_it
!= instList
[0].end()) {
1678 cprintf("Instruction:%i\nPC:%s\n[tid:%i]\n[sn:%lli]\nIssued:%i\n"
1680 num
, (*inst_list_it
)->pcState(),
1681 (*inst_list_it
)->threadNumber
,
1682 (*inst_list_it
)->seqNum
, (*inst_list_it
)->isIssued(),
1683 (*inst_list_it
)->isSquashed());
1690 InOrderCPU::wakeCPU()
1692 if (/*activityRec.active() || */tickEvent
.scheduled()) {
1693 DPRINTF(Activity
, "CPU already running.\n");
1697 DPRINTF(Activity
, "Waking up CPU\n");
1699 Tick extra_cycles
= tickToCycles((curTick() - 1) - lastRunningCycle
);
1701 idleCycles
+= extra_cycles
;
1702 for (int stage_num
= 0; stage_num
< NumStages
; stage_num
++) {
1703 pipelineStage
[stage_num
]->idleCycles
+= extra_cycles
;
1706 numCycles
+= extra_cycles
;
1708 schedule(&tickEvent
, nextCycle(curTick()));
1711 // Lots of copied full system code...place into BaseCPU class?
1713 InOrderCPU::wakeup()
1715 if (thread
[0]->status() != ThreadContext::Suspended
)
1720 DPRINTF(Quiesce
, "Suspended Processor woken\n");
1721 threadContexts
[0]->activate();
1725 InOrderCPU::syscallContext(Fault fault
, ThreadID tid
, DynInstPtr inst
, int delay
)
1727 // Syscall must be non-speculative, so squash from last stage
1728 unsigned squash_stage
= NumStages
- 1;
1729 inst
->setSquashInfo(squash_stage
);
1731 // Squash In Pipeline Stage
1732 pipelineStage
[squash_stage
]->setupSquash(inst
, tid
);
1734 // Schedule Squash Through-out Resource Pool
1735 resPool
->scheduleEvent(
1736 (InOrderCPU::CPUEventType
)ResourcePool::SquashAll
, inst
, 0);
1737 scheduleCpuEvent(Syscall
, fault
, tid
, inst
, delay
, Syscall_Pri
);
1741 InOrderCPU::syscall(int64_t callnum
, ThreadID tid
)
1743 DPRINTF(InOrderCPU
, "[tid:%i] Executing syscall().\n\n", tid
);
1745 DPRINTF(Activity
,"Activity: syscall() called.\n");
1747 // Temporarily increase this by one to account for the syscall
1749 ++(this->thread
[tid
]->funcExeInst
);
1751 // Execute the actual syscall.
1752 this->thread
[tid
]->syscall(callnum
);
1754 // Decrease funcExeInst by one as the normal commit will handle
1756 --(this->thread
[tid
]->funcExeInst
);
1758 // Clear Non-Speculative Block Variable
1759 nonSpecInstActive
[tid
] = false;
1763 InOrderCPU::getITBPtr()
1765 CacheUnit
*itb_res
= resPool
->getInstUnit();
1766 return itb_res
->tlb();
1771 InOrderCPU::getDTBPtr()
1773 return resPool
->getDataUnit()->tlb();
1777 InOrderCPU::getDecoderPtr(unsigned tid
)
1779 return resPool
->getInstUnit()->decoder
[tid
];
1783 InOrderCPU::read(DynInstPtr inst
, Addr addr
,
1784 uint8_t *data
, unsigned size
, unsigned flags
)
1786 return resPool
->getDataUnit()->read(inst
, addr
, data
, size
, flags
);
1790 InOrderCPU::write(DynInstPtr inst
, uint8_t *data
, unsigned size
,
1791 Addr addr
, unsigned flags
, uint64_t *write_res
)
1793 return resPool
->getDataUnit()->write(inst
, data
, size
, addr
, flags
,