Thread: Use inherited baseCpu rather than cpu in SimpleThread
[gem5.git] / src / dev / Pci.py
1 # Copyright (c) 2005-2007 The Regents of The University of Michigan
2 # All rights reserved.
3 #
4 # Redistribution and use in source and binary forms, with or without
5 # modification, are permitted provided that the following conditions are
6 # met: redistributions of source code must retain the above copyright
7 # notice, this list of conditions and the following disclaimer;
8 # redistributions in binary form must reproduce the above copyright
9 # notice, this list of conditions and the following disclaimer in the
10 # documentation and/or other materials provided with the distribution;
11 # neither the name of the copyright holders nor the names of its
12 # contributors may be used to endorse or promote products derived from
13 # this software without specific prior written permission.
14 #
15 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
16 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
17 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
18 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
19 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
20 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
21 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
25 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 #
27 # Authors: Nathan Binkert
28
29 from m5.SimObject import SimObject
30 from m5.params import *
31 from m5.proxy import *
32 from Device import BasicPioDevice, DmaDevice, PioDevice
33
34 class PciConfigAll(PioDevice):
35 type = 'PciConfigAll'
36 pio_latency = Param.Tick(1, "Programmed IO latency in simticks")
37 bus = Param.UInt8(0x00, "PCI bus to act as config space for")
38 size = Param.MemorySize32('16MB', "Size of config space")
39
40
41 class PciDevice(DmaDevice):
42 type = 'PciDevice'
43 abstract = True
44 config = Port("PCI configuration space port")
45 pci_bus = Param.Int("PCI bus")
46 pci_dev = Param.Int("PCI device number")
47 pci_func = Param.Int("PCI function code")
48 pio_latency = Param.Latency('1ns', "Programmed IO latency in simticks")
49 config_latency = Param.Latency('20ns', "Config read or write latency")
50
51 VendorID = Param.UInt16("Vendor ID")
52 DeviceID = Param.UInt16("Device ID")
53 Command = Param.UInt16(0, "Command")
54 Status = Param.UInt16(0, "Status")
55 Revision = Param.UInt8(0, "Device")
56 ProgIF = Param.UInt8(0, "Programming Interface")
57 SubClassCode = Param.UInt8(0, "Sub-Class Code")
58 ClassCode = Param.UInt8(0, "Class Code")
59 CacheLineSize = Param.UInt8(0, "System Cacheline Size")
60 LatencyTimer = Param.UInt8(0, "PCI Latency Timer")
61 HeaderType = Param.UInt8(0, "PCI Header Type")
62 BIST = Param.UInt8(0, "Built In Self Test")
63
64 BAR0 = Param.UInt32(0x00, "Base Address Register 0")
65 BAR1 = Param.UInt32(0x00, "Base Address Register 1")
66 BAR2 = Param.UInt32(0x00, "Base Address Register 2")
67 BAR3 = Param.UInt32(0x00, "Base Address Register 3")
68 BAR4 = Param.UInt32(0x00, "Base Address Register 4")
69 BAR5 = Param.UInt32(0x00, "Base Address Register 5")
70 BAR0Size = Param.MemorySize32('0B', "Base Address Register 0 Size")
71 BAR1Size = Param.MemorySize32('0B', "Base Address Register 1 Size")
72 BAR2Size = Param.MemorySize32('0B', "Base Address Register 2 Size")
73 BAR3Size = Param.MemorySize32('0B', "Base Address Register 3 Size")
74 BAR4Size = Param.MemorySize32('0B', "Base Address Register 4 Size")
75 BAR5Size = Param.MemorySize32('0B', "Base Address Register 5 Size")
76 BAR0LegacyIO = Param.Bool(False, "Whether BAR0 is hardwired legacy IO")
77 BAR1LegacyIO = Param.Bool(False, "Whether BAR1 is hardwired legacy IO")
78 BAR2LegacyIO = Param.Bool(False, "Whether BAR2 is hardwired legacy IO")
79 BAR3LegacyIO = Param.Bool(False, "Whether BAR3 is hardwired legacy IO")
80 BAR4LegacyIO = Param.Bool(False, "Whether BAR4 is hardwired legacy IO")
81 BAR5LegacyIO = Param.Bool(False, "Whether BAR5 is hardwired legacy IO")
82
83 CardbusCIS = Param.UInt32(0x00, "Cardbus Card Information Structure")
84 SubsystemID = Param.UInt16(0x00, "Subsystem ID")
85 SubsystemVendorID = Param.UInt16(0x00, "Subsystem Vendor ID")
86 ExpansionROM = Param.UInt32(0x00, "Expansion ROM Base Address")
87 InterruptLine = Param.UInt8(0x00, "Interrupt Line")
88 InterruptPin = Param.UInt8(0x00, "Interrupt Pin")
89 MaximumLatency = Param.UInt8(0x00, "Maximum Latency")
90 MinimumGrant = Param.UInt8(0x00, "Minimum Grant")
91
92