X86: Rework interrupt pins to allow one to many connections.
[gem5.git] / src / dev / ide_disk.hh
1 /*
2 * Copyright (c) 2004-2005 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Andrew Schultz
29 */
30
31 /** @file
32 * Device model for an IDE disk
33 */
34
35 #ifndef __IDE_DISK_HH__
36 #define __IDE_DISK_HH__
37
38 #include "base/statistics.hh"
39 #include "dev/disk_image.hh"
40 #include "dev/ide_atareg.h"
41 #include "dev/ide_ctrl.hh"
42 #include "dev/ide_wdcreg.h"
43 #include "dev/io_device.hh"
44 #include "sim/eventq.hh"
45 #include "params/IdeDisk.hh"
46
47
48 class ChunkGenerator;
49
50 #define DMA_BACKOFF_PERIOD 200
51
52 #define MAX_DMA_SIZE (131072) // 128K
53 #define MAX_MULTSECT (128)
54
55 #define PRD_BASE_MASK 0xfffffffe
56 #define PRD_COUNT_MASK 0xfffe
57 #define PRD_EOT_MASK 0x8000
58
59 typedef struct PrdEntry {
60 uint32_t baseAddr;
61 uint16_t byteCount;
62 uint16_t endOfTable;
63 } PrdEntry_t;
64
65 class PrdTableEntry {
66 public:
67 PrdEntry_t entry;
68
69 uint32_t getBaseAddr()
70 {
71 return (entry.baseAddr & PRD_BASE_MASK);
72 }
73
74 uint32_t getByteCount()
75 {
76 return ((entry.byteCount == 0) ? MAX_DMA_SIZE :
77 (entry.byteCount & PRD_COUNT_MASK));
78 }
79
80 uint16_t getEOT()
81 {
82 return (entry.endOfTable & PRD_EOT_MASK);
83 }
84 };
85
86 #define DATA_OFFSET (0)
87 #define ERROR_OFFSET (1)
88 #define FEATURES_OFFSET (1)
89 #define NSECTOR_OFFSET (2)
90 #define SECTOR_OFFSET (3)
91 #define LCYL_OFFSET (4)
92 #define HCYL_OFFSET (5)
93 #define SELECT_OFFSET (6)
94 #define DRIVE_OFFSET (6)
95 #define STATUS_OFFSET (7)
96 #define COMMAND_OFFSET (7)
97
98 #define CONTROL_OFFSET (2)
99 #define ALTSTAT_OFFSET (2)
100
101 #define SELECT_DEV_BIT 0x10
102 #define CONTROL_RST_BIT 0x04
103 #define CONTROL_IEN_BIT 0x02
104 #define STATUS_BSY_BIT 0x80
105 #define STATUS_DRDY_BIT 0x40
106 #define STATUS_DRQ_BIT 0x08
107 #define STATUS_SEEK_BIT 0x10
108 #define STATUS_DF_BIT 0x20
109 #define DRIVE_LBA_BIT 0x40
110
111 #define DEV0 (0)
112 #define DEV1 (1)
113
114 typedef struct CommandReg {
115 uint16_t data;
116 uint8_t error;
117 uint8_t sec_count;
118 uint8_t sec_num;
119 uint8_t cyl_low;
120 uint8_t cyl_high;
121 union {
122 uint8_t drive;
123 uint8_t head;
124 };
125 uint8_t command;
126 } CommandReg_t;
127
128 typedef enum Events {
129 None = 0,
130 Transfer,
131 ReadWait,
132 WriteWait,
133 PrdRead,
134 DmaRead,
135 DmaWrite
136 } Events_t;
137
138 typedef enum DevAction {
139 ACT_NONE = 0,
140 ACT_CMD_WRITE,
141 ACT_CMD_COMPLETE,
142 ACT_CMD_ERROR,
143 ACT_SELECT_WRITE,
144 ACT_STAT_READ,
145 ACT_DATA_READY,
146 ACT_DATA_READ_BYTE,
147 ACT_DATA_READ_SHORT,
148 ACT_DATA_WRITE_BYTE,
149 ACT_DATA_WRITE_SHORT,
150 ACT_DMA_READY,
151 ACT_DMA_DONE,
152 ACT_SRST_SET,
153 ACT_SRST_CLEAR
154 } DevAction_t;
155
156 typedef enum DevState {
157 // Device idle
158 Device_Idle_S = 0,
159 Device_Idle_SI,
160 Device_Idle_NS,
161
162 // Software reset
163 Device_Srst,
164
165 // Non-data commands
166 Command_Execution,
167
168 // PIO data-in (data to host)
169 Prepare_Data_In,
170 Data_Ready_INTRQ_In,
171 Transfer_Data_In,
172
173 // PIO data-out (data from host)
174 Prepare_Data_Out,
175 Data_Ready_INTRQ_Out,
176 Transfer_Data_Out,
177
178 // DMA protocol
179 Prepare_Data_Dma,
180 Transfer_Data_Dma
181 } DevState_t;
182
183 typedef enum DmaState {
184 Dma_Idle = 0,
185 Dma_Start,
186 Dma_Transfer
187 } DmaState_t;
188
189 class PhysicalMemory;
190 class IdeController;
191
192 /**
193 * IDE Disk device model
194 */
195 class IdeDisk : public SimObject
196 {
197 protected:
198 /** The IDE controller for this disk. */
199 IdeController *ctrl;
200 /** The image that contains the data of this disk. */
201 DiskImage *image;
202
203 protected:
204 /** The disk delay in microseconds. */
205 int diskDelay;
206
207 private:
208 /** Drive identification structure for this disk */
209 struct ataparams driveID;
210 /** Data buffer for transfers */
211 uint8_t *dataBuffer;
212 /** Number of bytes in command data transfer */
213 uint32_t cmdBytes;
214 /** Number of bytes left in command data transfer */
215 uint32_t cmdBytesLeft;
216 /** Number of bytes left in DRQ block */
217 uint32_t drqBytesLeft;
218 /** Current sector in access */
219 uint32_t curSector;
220 /** Command block registers */
221 CommandReg_t cmdReg;
222 /** Status register */
223 uint8_t status;
224 /** Interrupt enable bit */
225 bool nIENBit;
226 /** Device state */
227 DevState_t devState;
228 /** Dma state */
229 DmaState_t dmaState;
230 /** Dma transaction is a read */
231 bool dmaRead;
232 /** PRD table base address */
233 uint32_t curPrdAddr;
234 /** PRD entry */
235 PrdTableEntry curPrd;
236 /** Device ID (master=0/slave=1) */
237 int devID;
238 /** Interrupt pending */
239 bool intrPending;
240
241 Stats::Scalar<> dmaReadFullPages;
242 Stats::Scalar<> dmaReadBytes;
243 Stats::Scalar<> dmaReadTxs;
244 Stats::Scalar<> dmaWriteFullPages;
245 Stats::Scalar<> dmaWriteBytes;
246 Stats::Scalar<> dmaWriteTxs;
247 Stats::Formula rdBandwidth;
248 Stats::Formula wrBandwidth;
249 Stats::Formula totBandwidth;
250 Stats::Formula totBytes;
251
252 public:
253 typedef IdeDiskParams Params;
254 IdeDisk(const Params *p);
255
256 /**
257 * Delete the data buffer.
258 */
259 ~IdeDisk();
260
261 /**
262 * Reset the device state
263 */
264 void reset(int id);
265
266 /**
267 * Register Statistics
268 */
269 void regStats();
270
271 /**
272 * Set the controller for this device
273 * @param c The IDE controller
274 */
275 void setController(IdeController *c) {
276 if (ctrl) panic("Cannot change the controller once set!\n");
277 ctrl = c;
278 }
279
280 // Device register read/write
281 void readCommand(const Addr offset, int size, uint8_t *data);
282 void readControl(const Addr offset, int size, uint8_t *data);
283 void writeCommand(const Addr offset, int size, const uint8_t *data);
284 void writeControl(const Addr offset, int size, const uint8_t *data);
285
286 // Start/abort functions
287 void startDma(const uint32_t &prdTableBase);
288 void abortDma();
289
290 private:
291 void startCommand();
292
293 // Interrupt management
294 void intrPost();
295 void intrClear();
296
297 // DMA stuff
298 void doDmaTransfer();
299 friend class EventWrapper<IdeDisk, &IdeDisk::doDmaTransfer>;
300 EventWrapper<IdeDisk, &IdeDisk::doDmaTransfer> dmaTransferEvent;
301
302 void doDmaDataRead();
303
304 void doDmaRead();
305 ChunkGenerator *dmaReadCG;
306 friend class EventWrapper<IdeDisk, &IdeDisk::doDmaRead>;
307 EventWrapper<IdeDisk, &IdeDisk::doDmaRead> dmaReadWaitEvent;
308
309 void doDmaDataWrite();
310
311 void doDmaWrite();
312 ChunkGenerator *dmaWriteCG;
313 friend class EventWrapper<IdeDisk, &IdeDisk::doDmaWrite>;
314 EventWrapper<IdeDisk, &IdeDisk::doDmaWrite> dmaWriteWaitEvent;
315
316 void dmaPrdReadDone();
317 friend class EventWrapper<IdeDisk, &IdeDisk::dmaPrdReadDone>;
318 EventWrapper<IdeDisk, &IdeDisk::dmaPrdReadDone> dmaPrdReadEvent;
319
320 void dmaReadDone();
321 friend class EventWrapper<IdeDisk, &IdeDisk::dmaReadDone>;
322 EventWrapper<IdeDisk, &IdeDisk::dmaReadDone> dmaReadEvent;
323
324 void dmaWriteDone();
325 friend class EventWrapper<IdeDisk, &IdeDisk::dmaWriteDone>;
326 EventWrapper<IdeDisk, &IdeDisk::dmaWriteDone> dmaWriteEvent;
327
328 // Disk image read/write
329 void readDisk(uint32_t sector, uint8_t *data);
330 void writeDisk(uint32_t sector, uint8_t *data);
331
332 // State machine management
333 void updateState(DevAction_t action);
334
335 // Utility functions
336 bool isBSYSet() { return (status & STATUS_BSY_BIT); }
337 bool isIENSet() { return nIENBit; }
338 bool isDEVSelect();
339
340 void setComplete()
341 {
342 // clear out the status byte
343 status = 0;
344 // set the DRDY bit
345 status |= STATUS_DRDY_BIT;
346 // set the SEEK bit
347 status |= STATUS_SEEK_BIT;
348 }
349
350 uint32_t getLBABase()
351 {
352 return (Addr)(((cmdReg.head & 0xf) << 24) | (cmdReg.cyl_high << 16) |
353 (cmdReg.cyl_low << 8) | (cmdReg.sec_num));
354 }
355
356 inline Addr pciToDma(Addr pciAddr);
357
358 /**
359 * Serialize this object to the given output stream.
360 * @param os The stream to serialize to.
361 */
362 void serialize(std::ostream &os);
363
364 /**
365 * Reconstruct the state of this object from a checkpoint.
366 * @param cp The checkpoint to use.
367 * @param section The section name describing this object.
368 */
369 void unserialize(Checkpoint *cp, const std::string &section);
370 };
371
372
373 #endif // __IDE_DISK_HH__