1 /**************************************************************************
3 * Copyright 2009 VMware, Inc.
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the
8 * "Software"), to deal in the Software without restriction, including
9 * without limitation the rights to use, copy, modify, merge, publish,
10 * distribute, sub license, and/or sell copies of the Software, and to
11 * permit persons to whom the Software is furnished to do so, subject to
12 * the following conditions:
14 * The above copyright notice and this permission notice (including the
15 * next paragraph) shall be included in all copies or substantial portions
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
19 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
20 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
21 * IN NO EVENT SHALL VMWARE AND/OR ITS SUPPLIERS BE LIABLE FOR
22 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
23 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
24 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
26 **************************************************************************/
30 * Texture sampling -- common code.
32 * @author Jose Fonseca <jfonseca@vmware.com>
35 #include "pipe/p_defines.h"
36 #include "pipe/p_state.h"
37 #include "util/u_format.h"
38 #include "util/u_math.h"
39 #include "util/u_cpu_detect.h"
40 #include "lp_bld_arit.h"
41 #include "lp_bld_const.h"
42 #include "lp_bld_debug.h"
43 #include "lp_bld_printf.h"
44 #include "lp_bld_flow.h"
45 #include "lp_bld_sample.h"
46 #include "lp_bld_swizzle.h"
47 #include "lp_bld_type.h"
48 #include "lp_bld_logic.h"
49 #include "lp_bld_pack.h"
50 #include "lp_bld_quad.h"
51 #include "lp_bld_bitarit.h"
55 * Bri-linear factor. Should be greater than one.
57 #define BRILINEAR_FACTOR 2
60 * Does the given texture wrap mode allow sampling the texture border color?
61 * XXX maybe move this into gallium util code.
64 lp_sampler_wrap_mode_uses_border_color(unsigned mode
,
65 unsigned min_img_filter
,
66 unsigned mag_img_filter
)
69 case PIPE_TEX_WRAP_REPEAT
:
70 case PIPE_TEX_WRAP_CLAMP_TO_EDGE
:
71 case PIPE_TEX_WRAP_MIRROR_REPEAT
:
72 case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE
:
74 case PIPE_TEX_WRAP_CLAMP
:
75 case PIPE_TEX_WRAP_MIRROR_CLAMP
:
76 if (min_img_filter
== PIPE_TEX_FILTER_NEAREST
&&
77 mag_img_filter
== PIPE_TEX_FILTER_NEAREST
) {
82 case PIPE_TEX_WRAP_CLAMP_TO_BORDER
:
83 case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER
:
86 assert(0 && "unexpected wrap mode");
93 * Initialize lp_sampler_static_texture_state object with the gallium
94 * texture/sampler_view state (this contains the parts which are
98 lp_sampler_static_texture_state(struct lp_static_texture_state
*state
,
99 const struct pipe_sampler_view
*view
)
101 const struct pipe_resource
*texture
;
103 memset(state
, 0, sizeof *state
);
105 if (!view
|| !view
->texture
)
108 texture
= view
->texture
;
110 state
->format
= view
->format
;
111 state
->swizzle_r
= view
->swizzle_r
;
112 state
->swizzle_g
= view
->swizzle_g
;
113 state
->swizzle_b
= view
->swizzle_b
;
114 state
->swizzle_a
= view
->swizzle_a
;
116 state
->target
= texture
->target
;
117 state
->pot_width
= util_is_power_of_two(texture
->width0
);
118 state
->pot_height
= util_is_power_of_two(texture
->height0
);
119 state
->pot_depth
= util_is_power_of_two(texture
->depth0
);
120 state
->level_zero_only
= !view
->u
.tex
.last_level
;
123 * the layer / element / level parameters are all either dynamic
124 * state or handled transparently wrt execution.
130 * Initialize lp_sampler_static_sampler_state object with the gallium sampler
131 * state (this contains the parts which are considered static).
134 lp_sampler_static_sampler_state(struct lp_static_sampler_state
*state
,
135 const struct pipe_sampler_state
*sampler
)
137 memset(state
, 0, sizeof *state
);
143 * We don't copy sampler state over unless it is actually enabled, to avoid
144 * spurious recompiles, as the sampler static state is part of the shader
147 * Ideally the state tracker or cso_cache module would make all state
148 * canonical, but until that happens it's better to be safe than sorry here.
150 * XXX: Actually there's much more than can be done here, especially
151 * regarding 1D/2D/3D/CUBE textures, wrap modes, etc.
154 state
->wrap_s
= sampler
->wrap_s
;
155 state
->wrap_t
= sampler
->wrap_t
;
156 state
->wrap_r
= sampler
->wrap_r
;
157 state
->min_img_filter
= sampler
->min_img_filter
;
158 state
->mag_img_filter
= sampler
->mag_img_filter
;
159 state
->seamless_cube_map
= sampler
->seamless_cube_map
;
161 if (sampler
->max_lod
> 0.0f
) {
162 state
->min_mip_filter
= sampler
->min_mip_filter
;
164 state
->min_mip_filter
= PIPE_TEX_MIPFILTER_NONE
;
167 if (state
->min_mip_filter
!= PIPE_TEX_MIPFILTER_NONE
||
168 state
->min_img_filter
!= state
->mag_img_filter
) {
169 if (sampler
->lod_bias
!= 0.0f
) {
170 state
->lod_bias_non_zero
= 1;
173 /* If min_lod == max_lod we can greatly simplify mipmap selection.
174 * This is a case that occurs during automatic mipmap generation.
176 if (sampler
->min_lod
== sampler
->max_lod
) {
177 state
->min_max_lod_equal
= 1;
179 if (sampler
->min_lod
> 0.0f
) {
180 state
->apply_min_lod
= 1;
184 * XXX this won't do anything with the mesa state tracker which always
185 * sets max_lod to not more than actually present mip maps...
187 if (sampler
->max_lod
< (PIPE_MAX_TEXTURE_LEVELS
- 1)) {
188 state
->apply_max_lod
= 1;
193 state
->compare_mode
= sampler
->compare_mode
;
194 if (sampler
->compare_mode
!= PIPE_TEX_COMPARE_NONE
) {
195 state
->compare_func
= sampler
->compare_func
;
198 state
->normalized_coords
= sampler
->normalized_coords
;
203 * Generate code to compute coordinate gradient (rho).
204 * \param derivs partial derivatives of (s, t, r, q) with respect to X and Y
206 * The resulting rho has bld->levelf format (per quad or per element).
209 lp_build_rho(struct lp_build_sample_context
*bld
,
210 unsigned texture_unit
,
214 LLVMValueRef cube_rho
,
215 const struct lp_derivatives
*derivs
)
217 struct gallivm_state
*gallivm
= bld
->gallivm
;
218 struct lp_build_context
*int_size_bld
= &bld
->int_size_in_bld
;
219 struct lp_build_context
*float_size_bld
= &bld
->float_size_in_bld
;
220 struct lp_build_context
*float_bld
= &bld
->float_bld
;
221 struct lp_build_context
*coord_bld
= &bld
->coord_bld
;
222 struct lp_build_context
*rho_bld
= &bld
->lodf_bld
;
223 const unsigned dims
= bld
->dims
;
224 LLVMValueRef ddx_ddy
[2];
225 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
226 LLVMTypeRef i32t
= LLVMInt32TypeInContext(bld
->gallivm
->context
);
227 LLVMValueRef index0
= LLVMConstInt(i32t
, 0, 0);
228 LLVMValueRef index1
= LLVMConstInt(i32t
, 1, 0);
229 LLVMValueRef index2
= LLVMConstInt(i32t
, 2, 0);
230 LLVMValueRef rho_vec
;
231 LLVMValueRef int_size
, float_size
;
233 LLVMValueRef first_level
, first_level_vec
;
234 unsigned length
= coord_bld
->type
.length
;
235 unsigned num_quads
= length
/ 4;
236 boolean rho_per_quad
= rho_bld
->type
.length
!= length
;
237 boolean no_rho_opt
= (gallivm_debug
& GALLIVM_DEBUG_NO_RHO_APPROX
) && (dims
> 1);
239 LLVMValueRef i32undef
= LLVMGetUndef(LLVMInt32TypeInContext(gallivm
->context
));
240 LLVMValueRef rho_xvec
, rho_yvec
;
242 /* Note that all simplified calculations will only work for isotropic filtering */
245 * rho calcs are always per quad except for explicit derivs (excluding
246 * the messy cube maps for now) when requested.
249 first_level
= bld
->dynamic_state
->first_level(bld
->dynamic_state
,
250 bld
->gallivm
, texture_unit
);
251 first_level_vec
= lp_build_broadcast_scalar(int_size_bld
, first_level
);
252 int_size
= lp_build_minify(int_size_bld
, bld
->int_size
, first_level_vec
, TRUE
);
253 float_size
= lp_build_int_to_float(float_size_bld
, int_size
);
256 LLVMValueRef cubesize
;
257 LLVMValueRef index0
= lp_build_const_int32(gallivm
, 0);
260 * Cube map code did already everything except size mul and per-quad extraction.
261 * Luckily cube maps are always quadratic!
264 rho
= lp_build_pack_aos_scalars(bld
->gallivm
, coord_bld
->type
,
265 rho_bld
->type
, cube_rho
, 0);
268 rho
= lp_build_swizzle_scalar_aos(coord_bld
, cube_rho
, 0, 4);
270 /* Could optimize this for single quad just skip the broadcast */
271 cubesize
= lp_build_extract_broadcast(gallivm
, bld
->float_size_in_type
,
272 rho_bld
->type
, float_size
, index0
);
273 /* skipping sqrt hence returning rho squared */
274 cubesize
= lp_build_mul(rho_bld
, cubesize
, cubesize
);
275 rho
= lp_build_mul(rho_bld
, cubesize
, rho
);
278 LLVMValueRef ddmax
[3], ddx
[3], ddy
[3];
279 for (i
= 0; i
< dims
; i
++) {
280 LLVMValueRef floatdim
;
281 LLVMValueRef indexi
= lp_build_const_int32(gallivm
, i
);
283 floatdim
= lp_build_extract_broadcast(gallivm
, bld
->float_size_in_type
,
284 coord_bld
->type
, float_size
, indexi
);
287 * note that for rho_per_quad case could reduce math (at some shuffle
288 * cost), but for now use same code to per-pixel lod case.
291 ddx
[i
] = lp_build_mul(coord_bld
, floatdim
, derivs
->ddx
[i
]);
292 ddy
[i
] = lp_build_mul(coord_bld
, floatdim
, derivs
->ddy
[i
]);
293 ddx
[i
] = lp_build_mul(coord_bld
, ddx
[i
], ddx
[i
]);
294 ddy
[i
] = lp_build_mul(coord_bld
, ddy
[i
], ddy
[i
]);
297 LLVMValueRef tmpx
, tmpy
;
298 tmpx
= lp_build_abs(coord_bld
, derivs
->ddx
[i
]);
299 tmpy
= lp_build_abs(coord_bld
, derivs
->ddy
[i
]);
300 ddmax
[i
] = lp_build_max(coord_bld
, tmpx
, tmpy
);
301 ddmax
[i
] = lp_build_mul(coord_bld
, floatdim
, ddmax
[i
]);
305 rho_xvec
= lp_build_add(coord_bld
, ddx
[0], ddx
[1]);
306 rho_yvec
= lp_build_add(coord_bld
, ddy
[0], ddy
[1]);
308 rho_xvec
= lp_build_add(coord_bld
, rho_xvec
, ddx
[2]);
309 rho_yvec
= lp_build_add(coord_bld
, rho_yvec
, ddy
[2]);
311 rho
= lp_build_max(coord_bld
, rho_xvec
, rho_yvec
);
312 /* skipping sqrt hence returning rho squared */
317 rho
= lp_build_max(coord_bld
, rho
, ddmax
[1]);
319 rho
= lp_build_max(coord_bld
, rho
, ddmax
[2]);
325 * rho_vec contains per-pixel rho, convert to scalar per quad.
327 rho
= lp_build_pack_aos_scalars(bld
->gallivm
, coord_bld
->type
,
328 rho_bld
->type
, rho
, 0);
333 * This looks all a bit complex, but it's not that bad
334 * (the shuffle code makes it look worse than it is).
335 * Still, might not be ideal for all cases.
337 static const unsigned char swizzle0
[] = { /* no-op swizzle */
338 0, LP_BLD_SWIZZLE_DONTCARE
,
339 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
341 static const unsigned char swizzle1
[] = {
342 1, LP_BLD_SWIZZLE_DONTCARE
,
343 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
345 static const unsigned char swizzle2
[] = {
346 2, LP_BLD_SWIZZLE_DONTCARE
,
347 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
351 ddx_ddy
[0] = lp_build_packed_ddx_ddy_onecoord(coord_bld
, s
);
353 else if (dims
>= 2) {
354 ddx_ddy
[0] = lp_build_packed_ddx_ddy_twocoord(coord_bld
, s
, t
);
356 ddx_ddy
[1] = lp_build_packed_ddx_ddy_onecoord(coord_bld
, r
);
361 static const unsigned char swizzle01
[] = { /* no-op swizzle */
363 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
365 static const unsigned char swizzle23
[] = {
367 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
369 LLVMValueRef ddx_ddys
, ddx_ddyt
, floatdim
, shuffles
[LP_MAX_VECTOR_LENGTH
/ 4];
371 for (i
= 0; i
< num_quads
; i
++) {
372 shuffles
[i
*4+0] = shuffles
[i
*4+1] = index0
;
373 shuffles
[i
*4+2] = shuffles
[i
*4+3] = index1
;
375 floatdim
= LLVMBuildShuffleVector(builder
, float_size
, float_size
,
376 LLVMConstVector(shuffles
, length
), "");
377 ddx_ddy
[0] = lp_build_mul(coord_bld
, ddx_ddy
[0], floatdim
);
378 ddx_ddy
[0] = lp_build_mul(coord_bld
, ddx_ddy
[0], ddx_ddy
[0]);
379 ddx_ddys
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle01
);
380 ddx_ddyt
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle23
);
381 rho_vec
= lp_build_add(coord_bld
, ddx_ddys
, ddx_ddyt
);
384 static const unsigned char swizzle02
[] = {
386 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
388 floatdim
= lp_build_extract_broadcast(gallivm
, bld
->float_size_in_type
,
389 coord_bld
->type
, float_size
, index2
);
390 ddx_ddy
[1] = lp_build_mul(coord_bld
, ddx_ddy
[1], floatdim
);
391 ddx_ddy
[1] = lp_build_mul(coord_bld
, ddx_ddy
[1], ddx_ddy
[1]);
392 ddx_ddy
[1] = lp_build_swizzle_aos(coord_bld
, ddx_ddy
[1], swizzle02
);
393 rho_vec
= lp_build_add(coord_bld
, rho_vec
, ddx_ddy
[1]);
396 rho_xvec
= lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle0
);
397 rho_yvec
= lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle1
);
398 rho
= lp_build_max(coord_bld
, rho_xvec
, rho_yvec
);
401 rho
= lp_build_pack_aos_scalars(bld
->gallivm
, coord_bld
->type
,
402 rho_bld
->type
, rho
, 0);
405 rho
= lp_build_swizzle_scalar_aos(coord_bld
, rho
, 0, 4);
407 /* skipping sqrt hence returning rho squared */
410 ddx_ddy
[0] = lp_build_abs(coord_bld
, ddx_ddy
[0]);
412 ddx_ddy
[1] = lp_build_abs(coord_bld
, ddx_ddy
[1]);
416 rho_xvec
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle0
);
417 rho_yvec
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle2
);
419 else if (dims
== 2) {
420 static const unsigned char swizzle02
[] = {
422 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
424 static const unsigned char swizzle13
[] = {
426 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
428 rho_xvec
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle02
);
429 rho_yvec
= lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle13
);
432 LLVMValueRef shuffles1
[LP_MAX_VECTOR_LENGTH
];
433 LLVMValueRef shuffles2
[LP_MAX_VECTOR_LENGTH
];
435 for (i
= 0; i
< num_quads
; i
++) {
436 shuffles1
[4*i
+ 0] = lp_build_const_int32(gallivm
, 4*i
);
437 shuffles1
[4*i
+ 1] = lp_build_const_int32(gallivm
, 4*i
+ 2);
438 shuffles1
[4*i
+ 2] = lp_build_const_int32(gallivm
, length
+ 4*i
);
439 shuffles1
[4*i
+ 3] = i32undef
;
440 shuffles2
[4*i
+ 0] = lp_build_const_int32(gallivm
, 4*i
+ 1);
441 shuffles2
[4*i
+ 1] = lp_build_const_int32(gallivm
, 4*i
+ 3);
442 shuffles2
[4*i
+ 2] = lp_build_const_int32(gallivm
, length
+ 4*i
+ 2);
443 shuffles2
[4*i
+ 3] = i32undef
;
445 rho_xvec
= LLVMBuildShuffleVector(builder
, ddx_ddy
[0], ddx_ddy
[1],
446 LLVMConstVector(shuffles1
, length
), "");
447 rho_yvec
= LLVMBuildShuffleVector(builder
, ddx_ddy
[0], ddx_ddy
[1],
448 LLVMConstVector(shuffles2
, length
), "");
451 rho_vec
= lp_build_max(coord_bld
, rho_xvec
, rho_yvec
);
453 if (bld
->coord_type
.length
> 4) {
454 /* expand size to each quad */
456 /* could use some broadcast_vector helper for this? */
457 LLVMValueRef src
[LP_MAX_VECTOR_LENGTH
/4];
458 for (i
= 0; i
< num_quads
; i
++) {
461 float_size
= lp_build_concat(bld
->gallivm
, src
, float_size_bld
->type
, num_quads
);
464 float_size
= lp_build_broadcast_scalar(coord_bld
, float_size
);
466 rho_vec
= lp_build_mul(coord_bld
, rho_vec
, float_size
);
473 LLVMValueRef rho_s
, rho_t
, rho_r
;
475 rho_s
= lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle0
);
476 rho_t
= lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle1
);
478 rho
= lp_build_max(coord_bld
, rho_s
, rho_t
);
481 rho_r
= lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle2
);
482 rho
= lp_build_max(coord_bld
, rho
, rho_r
);
487 rho
= lp_build_pack_aos_scalars(bld
->gallivm
, coord_bld
->type
,
488 rho_bld
->type
, rho
, 0);
491 rho
= lp_build_swizzle_scalar_aos(coord_bld
, rho
, 0, 4);
496 rho_vec
= LLVMBuildExtractElement(builder
, rho_vec
, index0
, "");
498 rho_vec
= lp_build_mul(float_size_bld
, rho_vec
, float_size
);
505 LLVMValueRef rho_s
, rho_t
, rho_r
;
507 rho_s
= LLVMBuildExtractElement(builder
, rho_vec
, index0
, "");
508 rho_t
= LLVMBuildExtractElement(builder
, rho_vec
, index1
, "");
510 rho
= lp_build_max(float_bld
, rho_s
, rho_t
);
513 rho_r
= LLVMBuildExtractElement(builder
, rho_vec
, index2
, "");
514 rho
= lp_build_max(float_bld
, rho
, rho_r
);
519 rho
= lp_build_broadcast_scalar(rho_bld
, rho
);
530 * Bri-linear lod computation
532 * Use a piece-wise linear approximation of log2 such that:
533 * - round to nearest, for values in the neighborhood of -1, 0, 1, 2, etc.
534 * - linear approximation for values in the neighborhood of 0.5, 1.5., etc,
535 * with the steepness specified in 'factor'
536 * - exact result for 0.5, 1.5, etc.
552 * This is a technique also commonly used in hardware:
553 * - http://ixbtlabs.com/articles2/gffx/nv40-rx800-3.html
555 * TODO: For correctness, this should only be applied when texture is known to
556 * have regular mipmaps, i.e., mipmaps derived from the base level.
558 * TODO: This could be done in fixed point, where applicable.
561 lp_build_brilinear_lod(struct lp_build_context
*bld
,
564 LLVMValueRef
*out_lod_ipart
,
565 LLVMValueRef
*out_lod_fpart
)
567 LLVMValueRef lod_fpart
;
568 double pre_offset
= (factor
- 0.5)/factor
- 0.5;
569 double post_offset
= 1 - factor
;
572 lp_build_printf(bld
->gallivm
, "lod = %f\n", lod
);
575 lod
= lp_build_add(bld
, lod
,
576 lp_build_const_vec(bld
->gallivm
, bld
->type
, pre_offset
));
578 lp_build_ifloor_fract(bld
, lod
, out_lod_ipart
, &lod_fpart
);
580 lod_fpart
= lp_build_mul(bld
, lod_fpart
,
581 lp_build_const_vec(bld
->gallivm
, bld
->type
, factor
));
583 lod_fpart
= lp_build_add(bld
, lod_fpart
,
584 lp_build_const_vec(bld
->gallivm
, bld
->type
, post_offset
));
587 * It's not necessary to clamp lod_fpart since:
588 * - the above expression will never produce numbers greater than one.
589 * - the mip filtering branch is only taken if lod_fpart is positive
592 *out_lod_fpart
= lod_fpart
;
595 lp_build_printf(bld
->gallivm
, "lod_ipart = %i\n", *out_lod_ipart
);
596 lp_build_printf(bld
->gallivm
, "lod_fpart = %f\n\n", *out_lod_fpart
);
602 * Combined log2 and brilinear lod computation.
604 * It's in all identical to calling lp_build_fast_log2() and
605 * lp_build_brilinear_lod() above, but by combining we can compute the integer
606 * and fractional part independently.
609 lp_build_brilinear_rho(struct lp_build_context
*bld
,
612 LLVMValueRef
*out_lod_ipart
,
613 LLVMValueRef
*out_lod_fpart
)
615 LLVMValueRef lod_ipart
;
616 LLVMValueRef lod_fpart
;
618 const double pre_factor
= (2*factor
- 0.5)/(M_SQRT2
*factor
);
619 const double post_offset
= 1 - 2*factor
;
621 assert(bld
->type
.floating
);
623 assert(lp_check_value(bld
->type
, rho
));
626 * The pre factor will make the intersections with the exact powers of two
627 * happen precisely where we want them to be, which means that the integer
628 * part will not need any post adjustments.
630 rho
= lp_build_mul(bld
, rho
,
631 lp_build_const_vec(bld
->gallivm
, bld
->type
, pre_factor
));
633 /* ipart = ifloor(log2(rho)) */
634 lod_ipart
= lp_build_extract_exponent(bld
, rho
, 0);
636 /* fpart = rho / 2**ipart */
637 lod_fpart
= lp_build_extract_mantissa(bld
, rho
);
639 lod_fpart
= lp_build_mul(bld
, lod_fpart
,
640 lp_build_const_vec(bld
->gallivm
, bld
->type
, factor
));
642 lod_fpart
= lp_build_add(bld
, lod_fpart
,
643 lp_build_const_vec(bld
->gallivm
, bld
->type
, post_offset
));
646 * Like lp_build_brilinear_lod, it's not necessary to clamp lod_fpart since:
647 * - the above expression will never produce numbers greater than one.
648 * - the mip filtering branch is only taken if lod_fpart is positive
651 *out_lod_ipart
= lod_ipart
;
652 *out_lod_fpart
= lod_fpart
;
657 * Fast implementation of iround(log2(sqrt(x))), based on
658 * log2(x^n) == n*log2(x).
660 * Gives accurate results all the time.
661 * (Could be trivially extended to handle other power-of-two roots.)
664 lp_build_ilog2_sqrt(struct lp_build_context
*bld
,
667 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
669 struct lp_type i_type
= lp_int_type(bld
->type
);
670 LLVMValueRef one
= lp_build_const_int_vec(bld
->gallivm
, i_type
, 1);
672 assert(bld
->type
.floating
);
674 assert(lp_check_value(bld
->type
, x
));
676 /* ipart = log2(x) + 0.5 = 0.5*(log2(x^2) + 1.0) */
677 ipart
= lp_build_extract_exponent(bld
, x
, 1);
678 ipart
= LLVMBuildAShr(builder
, ipart
, one
, "");
685 * Generate code to compute texture level of detail (lambda).
686 * \param derivs partial derivatives of (s, t, r, q) with respect to X and Y
687 * \param lod_bias optional float vector with the shader lod bias
688 * \param explicit_lod optional float vector with the explicit lod
689 * \param cube_rho rho calculated by cube coord mapping (optional)
690 * \param out_lod_ipart integer part of lod
691 * \param out_lod_fpart float part of lod (never larger than 1 but may be negative)
692 * \param out_lod_positive (mask) if lod is positive (i.e. texture is minified)
694 * The resulting lod can be scalar per quad or be per element.
697 lp_build_lod_selector(struct lp_build_sample_context
*bld
,
698 unsigned texture_unit
,
699 unsigned sampler_unit
,
703 LLVMValueRef cube_rho
,
704 const struct lp_derivatives
*derivs
,
705 LLVMValueRef lod_bias
, /* optional */
706 LLVMValueRef explicit_lod
, /* optional */
708 LLVMValueRef
*out_lod_ipart
,
709 LLVMValueRef
*out_lod_fpart
,
710 LLVMValueRef
*out_lod_positive
)
713 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
714 struct lp_build_context
*lodf_bld
= &bld
->lodf_bld
;
717 *out_lod_ipart
= bld
->lodi_bld
.zero
;
718 *out_lod_positive
= bld
->lodi_bld
.zero
;
719 *out_lod_fpart
= lodf_bld
->zero
;
722 * For determining min/mag, we follow GL 4.1 spec, 3.9.12 Texture Magnification:
723 * "Implementations may either unconditionally assume c = 0 for the minification
724 * vs. magnification switch-over point, or may choose to make c depend on the
725 * combination of minification and magnification modes as follows: if the
726 * magnification filter is given by LINEAR and the minification filter is given
727 * by NEAREST_MIPMAP_NEAREST or NEAREST_MIPMAP_LINEAR, then c = 0.5. This is
728 * done to ensure that a minified texture does not appear "sharper" than a
729 * magnified texture. Otherwise c = 0."
730 * And 3.9.11 Texture Minification:
731 * "If lod is less than or equal to the constant c (see section 3.9.12) the
732 * texture is said to be magnified; if it is greater, the texture is minified."
733 * So, using 0 as switchover point always, and using magnification for lod == 0.
734 * Note that the always c = 0 behavior is new (first appearing in GL 3.1 spec),
735 * old GL versions required 0.5 for the modes listed above.
736 * I have no clue about the (undocumented) wishes of d3d9/d3d10 here!
739 if (bld
->static_sampler_state
->min_max_lod_equal
) {
740 /* User is forcing sampling from a particular mipmap level.
741 * This is hit during mipmap generation.
743 LLVMValueRef min_lod
=
744 bld
->dynamic_state
->min_lod(bld
->dynamic_state
,
745 bld
->gallivm
, sampler_unit
);
747 lod
= lp_build_broadcast_scalar(lodf_bld
, min_lod
);
751 if (bld
->num_lods
!= bld
->coord_type
.length
)
752 lod
= lp_build_pack_aos_scalars(bld
->gallivm
, bld
->coord_bld
.type
,
753 lodf_bld
->type
, explicit_lod
, 0);
759 boolean rho_squared
= ((gallivm_debug
& GALLIVM_DEBUG_NO_RHO_APPROX
) &&
760 (bld
->dims
> 1)) || cube_rho
;
762 rho
= lp_build_rho(bld
, texture_unit
, s
, t
, r
, cube_rho
, derivs
);
765 * Compute lod = log2(rho)
769 !bld
->static_sampler_state
->lod_bias_non_zero
&&
770 !bld
->static_sampler_state
->apply_max_lod
&&
771 !bld
->static_sampler_state
->apply_min_lod
) {
773 * Special case when there are no post-log2 adjustments, which
774 * saves instructions but keeping the integer and fractional lod
775 * computations separate from the start.
778 if (mip_filter
== PIPE_TEX_MIPFILTER_NONE
||
779 mip_filter
== PIPE_TEX_MIPFILTER_NEAREST
) {
781 * Don't actually need both values all the time, lod_ipart is
782 * needed for nearest mipfilter, lod_positive if min != mag.
785 *out_lod_ipart
= lp_build_ilog2_sqrt(lodf_bld
, rho
);
788 *out_lod_ipart
= lp_build_ilog2(lodf_bld
, rho
);
790 *out_lod_positive
= lp_build_cmp(lodf_bld
, PIPE_FUNC_GREATER
,
794 if (mip_filter
== PIPE_TEX_MIPFILTER_LINEAR
&&
795 !(gallivm_debug
& GALLIVM_DEBUG_NO_BRILINEAR
) &&
798 * This can't work if rho is squared. Not sure if it could be
799 * fixed while keeping it worthwile, could also do sqrt here
800 * but brilinear and no_rho_opt seems like a combination not
801 * making much sense anyway so just use ordinary path below.
803 lp_build_brilinear_rho(lodf_bld
, rho
, BRILINEAR_FACTOR
,
804 out_lod_ipart
, out_lod_fpart
);
805 *out_lod_positive
= lp_build_cmp(lodf_bld
, PIPE_FUNC_GREATER
,
812 lod
= lp_build_log2(lodf_bld
, rho
);
815 lod
= lp_build_fast_log2(lodf_bld
, rho
);
818 /* log2(x^2) == 0.5*log2(x) */
819 lod
= lp_build_mul(lodf_bld
, lod
,
820 lp_build_const_vec(bld
->gallivm
, lodf_bld
->type
, 0.5F
));
823 /* add shader lod bias */
825 if (bld
->num_lods
!= bld
->coord_type
.length
)
826 lod_bias
= lp_build_pack_aos_scalars(bld
->gallivm
, bld
->coord_bld
.type
,
827 lodf_bld
->type
, lod_bias
, 0);
828 lod
= LLVMBuildFAdd(builder
, lod
, lod_bias
, "shader_lod_bias");
832 /* add sampler lod bias */
833 if (bld
->static_sampler_state
->lod_bias_non_zero
) {
834 LLVMValueRef sampler_lod_bias
=
835 bld
->dynamic_state
->lod_bias(bld
->dynamic_state
,
836 bld
->gallivm
, sampler_unit
);
837 sampler_lod_bias
= lp_build_broadcast_scalar(lodf_bld
,
839 lod
= LLVMBuildFAdd(builder
, lod
, sampler_lod_bias
, "sampler_lod_bias");
843 if (bld
->static_sampler_state
->apply_max_lod
) {
844 LLVMValueRef max_lod
=
845 bld
->dynamic_state
->max_lod(bld
->dynamic_state
,
846 bld
->gallivm
, sampler_unit
);
847 max_lod
= lp_build_broadcast_scalar(lodf_bld
, max_lod
);
849 lod
= lp_build_min(lodf_bld
, lod
, max_lod
);
851 if (bld
->static_sampler_state
->apply_min_lod
) {
852 LLVMValueRef min_lod
=
853 bld
->dynamic_state
->min_lod(bld
->dynamic_state
,
854 bld
->gallivm
, sampler_unit
);
855 min_lod
= lp_build_broadcast_scalar(lodf_bld
, min_lod
);
857 lod
= lp_build_max(lodf_bld
, lod
, min_lod
);
861 *out_lod_positive
= lp_build_cmp(lodf_bld
, PIPE_FUNC_GREATER
,
862 lod
, lodf_bld
->zero
);
864 if (mip_filter
== PIPE_TEX_MIPFILTER_LINEAR
) {
865 if (!(gallivm_debug
& GALLIVM_DEBUG_NO_BRILINEAR
)) {
866 lp_build_brilinear_lod(lodf_bld
, lod
, BRILINEAR_FACTOR
,
867 out_lod_ipart
, out_lod_fpart
);
870 lp_build_ifloor_fract(lodf_bld
, lod
, out_lod_ipart
, out_lod_fpart
);
873 lp_build_name(*out_lod_fpart
, "lod_fpart");
876 *out_lod_ipart
= lp_build_iround(lodf_bld
, lod
);
879 lp_build_name(*out_lod_ipart
, "lod_ipart");
886 * For PIPE_TEX_MIPFILTER_NEAREST, convert int part of lod
887 * to actual mip level.
888 * Note: this is all scalar per quad code.
889 * \param lod_ipart int texture level of detail
890 * \param level_out returns integer
891 * \param out_of_bounds returns per coord out_of_bounds mask if provided
894 lp_build_nearest_mip_level(struct lp_build_sample_context
*bld
,
895 unsigned texture_unit
,
896 LLVMValueRef lod_ipart
,
897 LLVMValueRef
*level_out
,
898 LLVMValueRef
*out_of_bounds
)
900 struct lp_build_context
*leveli_bld
= &bld
->leveli_bld
;
901 LLVMValueRef first_level
, last_level
, level
;
903 first_level
= bld
->dynamic_state
->first_level(bld
->dynamic_state
,
904 bld
->gallivm
, texture_unit
);
905 last_level
= bld
->dynamic_state
->last_level(bld
->dynamic_state
,
906 bld
->gallivm
, texture_unit
);
907 first_level
= lp_build_broadcast_scalar(leveli_bld
, first_level
);
908 last_level
= lp_build_broadcast_scalar(leveli_bld
, last_level
);
910 level
= lp_build_add(leveli_bld
, lod_ipart
, first_level
);
913 LLVMValueRef out
, out1
;
914 out
= lp_build_cmp(leveli_bld
, PIPE_FUNC_LESS
, level
, first_level
);
915 out1
= lp_build_cmp(leveli_bld
, PIPE_FUNC_GREATER
, level
, last_level
);
916 out
= lp_build_or(leveli_bld
, out
, out1
);
917 if (bld
->num_mips
== bld
->coord_bld
.type
.length
) {
918 *out_of_bounds
= out
;
920 else if (bld
->num_mips
== 1) {
921 *out_of_bounds
= lp_build_broadcast_scalar(&bld
->int_coord_bld
, out
);
924 assert(bld
->num_mips
== bld
->coord_bld
.type
.length
/ 4);
925 *out_of_bounds
= lp_build_unpack_broadcast_aos_scalars(bld
->gallivm
,
927 bld
->int_coord_bld
.type
,
933 /* clamp level to legal range of levels */
934 *level_out
= lp_build_clamp(leveli_bld
, level
, first_level
, last_level
);
941 * For PIPE_TEX_MIPFILTER_LINEAR, convert per-quad (or per element) int LOD(s)
942 * to two (per-quad) (adjacent) mipmap level indexes, and fix up float lod
944 * Later, we'll sample from those two mipmap levels and interpolate between them.
947 lp_build_linear_mip_levels(struct lp_build_sample_context
*bld
,
948 unsigned texture_unit
,
949 LLVMValueRef lod_ipart
,
950 LLVMValueRef
*lod_fpart_inout
,
951 LLVMValueRef
*level0_out
,
952 LLVMValueRef
*level1_out
)
954 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
955 struct lp_build_context
*leveli_bld
= &bld
->leveli_bld
;
956 struct lp_build_context
*levelf_bld
= &bld
->levelf_bld
;
957 LLVMValueRef first_level
, last_level
;
958 LLVMValueRef clamp_min
;
959 LLVMValueRef clamp_max
;
961 assert(bld
->num_lods
== bld
->num_mips
);
963 first_level
= bld
->dynamic_state
->first_level(bld
->dynamic_state
,
964 bld
->gallivm
, texture_unit
);
965 last_level
= bld
->dynamic_state
->last_level(bld
->dynamic_state
,
966 bld
->gallivm
, texture_unit
);
967 first_level
= lp_build_broadcast_scalar(leveli_bld
, first_level
);
968 last_level
= lp_build_broadcast_scalar(leveli_bld
, last_level
);
970 *level0_out
= lp_build_add(leveli_bld
, lod_ipart
, first_level
);
971 *level1_out
= lp_build_add(leveli_bld
, *level0_out
, leveli_bld
->one
);
974 * Clamp both *level0_out and *level1_out to [first_level, last_level], with
975 * the minimum number of comparisons, and zeroing lod_fpart in the extreme
976 * ends in the process.
979 /* *level0_out < first_level */
980 clamp_min
= LLVMBuildICmp(builder
, LLVMIntSLT
,
981 *level0_out
, first_level
,
982 "clamp_lod_to_first");
984 *level0_out
= LLVMBuildSelect(builder
, clamp_min
,
985 first_level
, *level0_out
, "");
987 *level1_out
= LLVMBuildSelect(builder
, clamp_min
,
988 first_level
, *level1_out
, "");
990 *lod_fpart_inout
= LLVMBuildSelect(builder
, clamp_min
,
991 levelf_bld
->zero
, *lod_fpart_inout
, "");
993 /* *level0_out >= last_level */
994 clamp_max
= LLVMBuildICmp(builder
, LLVMIntSGE
,
995 *level0_out
, last_level
,
996 "clamp_lod_to_last");
998 *level0_out
= LLVMBuildSelect(builder
, clamp_max
,
999 last_level
, *level0_out
, "");
1001 *level1_out
= LLVMBuildSelect(builder
, clamp_max
,
1002 last_level
, *level1_out
, "");
1004 *lod_fpart_inout
= LLVMBuildSelect(builder
, clamp_max
,
1005 levelf_bld
->zero
, *lod_fpart_inout
, "");
1007 lp_build_name(*level0_out
, "texture%u_miplevel0", texture_unit
);
1008 lp_build_name(*level1_out
, "texture%u_miplevel1", texture_unit
);
1009 lp_build_name(*lod_fpart_inout
, "texture%u_mipweight", texture_unit
);
1014 * Return pointer to a single mipmap level.
1015 * \param level integer mipmap level
1018 lp_build_get_mipmap_level(struct lp_build_sample_context
*bld
,
1021 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1022 LLVMValueRef indexes
[2], data_ptr
, mip_offset
;
1024 indexes
[0] = lp_build_const_int32(bld
->gallivm
, 0);
1026 mip_offset
= LLVMBuildGEP(builder
, bld
->mip_offsets
, indexes
, 2, "");
1027 mip_offset
= LLVMBuildLoad(builder
, mip_offset
, "");
1028 data_ptr
= LLVMBuildGEP(builder
, bld
->base_ptr
, &mip_offset
, 1, "");
1033 * Return (per-pixel) offsets to mip levels.
1034 * \param level integer mipmap level
1037 lp_build_get_mip_offsets(struct lp_build_sample_context
*bld
,
1040 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1041 LLVMValueRef indexes
[2], offsets
, offset1
;
1043 indexes
[0] = lp_build_const_int32(bld
->gallivm
, 0);
1044 if (bld
->num_mips
== 1) {
1046 offset1
= LLVMBuildGEP(builder
, bld
->mip_offsets
, indexes
, 2, "");
1047 offset1
= LLVMBuildLoad(builder
, offset1
, "");
1048 offsets
= lp_build_broadcast_scalar(&bld
->int_coord_bld
, offset1
);
1050 else if (bld
->num_mips
== bld
->coord_bld
.type
.length
/ 4) {
1053 offsets
= bld
->int_coord_bld
.undef
;
1054 for (i
= 0; i
< bld
->num_mips
; i
++) {
1055 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1056 LLVMValueRef indexo
= lp_build_const_int32(bld
->gallivm
, 4 * i
);
1057 indexes
[1] = LLVMBuildExtractElement(builder
, level
, indexi
, "");
1058 offset1
= LLVMBuildGEP(builder
, bld
->mip_offsets
, indexes
, 2, "");
1059 offset1
= LLVMBuildLoad(builder
, offset1
, "");
1060 offsets
= LLVMBuildInsertElement(builder
, offsets
, offset1
, indexo
, "");
1062 offsets
= lp_build_swizzle_scalar_aos(&bld
->int_coord_bld
, offsets
, 0, 4);
1067 assert (bld
->num_mips
== bld
->coord_bld
.type
.length
);
1069 offsets
= bld
->int_coord_bld
.undef
;
1070 for (i
= 0; i
< bld
->num_mips
; i
++) {
1071 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1072 indexes
[1] = LLVMBuildExtractElement(builder
, level
, indexi
, "");
1073 offset1
= LLVMBuildGEP(builder
, bld
->mip_offsets
, indexes
, 2, "");
1074 offset1
= LLVMBuildLoad(builder
, offset1
, "");
1075 offsets
= LLVMBuildInsertElement(builder
, offsets
, offset1
, indexi
, "");
1083 * Codegen equivalent for u_minify().
1084 * @param lod_scalar if lod is a (broadcasted) scalar
1085 * Return max(1, base_size >> level);
1088 lp_build_minify(struct lp_build_context
*bld
,
1089 LLVMValueRef base_size
,
1093 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1094 assert(lp_check_value(bld
->type
, base_size
));
1095 assert(lp_check_value(bld
->type
, level
));
1097 if (level
== bld
->zero
) {
1098 /* if we're using mipmap level zero, no minification is needed */
1103 assert(bld
->type
.sign
);
1105 (util_cpu_caps
.has_avx2
|| !util_cpu_caps
.has_sse
)) {
1106 size
= LLVMBuildLShr(builder
, base_size
, level
, "minify");
1107 size
= lp_build_max(bld
, size
, bld
->one
);
1111 * emulate shift with float mul, since intel "forgot" shifts with
1112 * per-element shift count until avx2, which results in terrible
1113 * scalar extraction (both count and value), scalar shift,
1114 * vector reinsertion. Should not be an issue on any non-x86 cpu
1115 * with a vector instruction set.
1116 * On cpus with AMD's XOP this should also be unnecessary but I'm
1117 * not sure if llvm would emit this with current flags.
1119 LLVMValueRef const127
, const23
, lf
;
1120 struct lp_type ftype
;
1121 struct lp_build_context fbld
;
1122 ftype
= lp_type_float_vec(32, bld
->type
.length
* bld
->type
.width
);
1123 lp_build_context_init(&fbld
, bld
->gallivm
, ftype
);
1124 const127
= lp_build_const_int_vec(bld
->gallivm
, bld
->type
, 127);
1125 const23
= lp_build_const_int_vec(bld
->gallivm
, bld
->type
, 23);
1127 /* calculate 2^(-level) float */
1128 lf
= lp_build_sub(bld
, const127
, level
);
1129 lf
= lp_build_shl(bld
, lf
, const23
);
1130 lf
= LLVMBuildBitCast(builder
, lf
, fbld
.vec_type
, "");
1132 /* finish shift operation by doing float mul */
1133 base_size
= lp_build_int_to_float(&fbld
, base_size
);
1134 size
= lp_build_mul(&fbld
, base_size
, lf
);
1136 * do the max also with floats because
1137 * a) non-emulated int max requires sse41
1138 * (this is actually a lie as we could cast to 16bit values
1139 * as 16bit is sufficient and 16bit int max is sse2)
1140 * b) with avx we can do int max 4-wide but float max 8-wide
1142 size
= lp_build_max(&fbld
, size
, fbld
.one
);
1143 size
= lp_build_itrunc(&fbld
, size
);
1151 * Dereference stride_array[mipmap_level] array to get a stride.
1152 * Return stride as a vector.
1155 lp_build_get_level_stride_vec(struct lp_build_sample_context
*bld
,
1156 LLVMValueRef stride_array
, LLVMValueRef level
)
1158 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1159 LLVMValueRef indexes
[2], stride
, stride1
;
1160 indexes
[0] = lp_build_const_int32(bld
->gallivm
, 0);
1161 if (bld
->num_mips
== 1) {
1163 stride1
= LLVMBuildGEP(builder
, stride_array
, indexes
, 2, "");
1164 stride1
= LLVMBuildLoad(builder
, stride1
, "");
1165 stride
= lp_build_broadcast_scalar(&bld
->int_coord_bld
, stride1
);
1167 else if (bld
->num_mips
== bld
->coord_bld
.type
.length
/ 4) {
1168 LLVMValueRef stride1
;
1171 stride
= bld
->int_coord_bld
.undef
;
1172 for (i
= 0; i
< bld
->num_mips
; i
++) {
1173 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1174 LLVMValueRef indexo
= lp_build_const_int32(bld
->gallivm
, 4 * i
);
1175 indexes
[1] = LLVMBuildExtractElement(builder
, level
, indexi
, "");
1176 stride1
= LLVMBuildGEP(builder
, stride_array
, indexes
, 2, "");
1177 stride1
= LLVMBuildLoad(builder
, stride1
, "");
1178 stride
= LLVMBuildInsertElement(builder
, stride
, stride1
, indexo
, "");
1180 stride
= lp_build_swizzle_scalar_aos(&bld
->int_coord_bld
, stride
, 0, 4);
1183 LLVMValueRef stride1
;
1186 assert (bld
->num_mips
== bld
->coord_bld
.type
.length
);
1188 stride
= bld
->int_coord_bld
.undef
;
1189 for (i
= 0; i
< bld
->coord_bld
.type
.length
; i
++) {
1190 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1191 indexes
[1] = LLVMBuildExtractElement(builder
, level
, indexi
, "");
1192 stride1
= LLVMBuildGEP(builder
, stride_array
, indexes
, 2, "");
1193 stride1
= LLVMBuildLoad(builder
, stride1
, "");
1194 stride
= LLVMBuildInsertElement(builder
, stride
, stride1
, indexi
, "");
1202 * When sampling a mipmap, we need to compute the width, height, depth
1203 * of the source levels from the level indexes. This helper function
1207 lp_build_mipmap_level_sizes(struct lp_build_sample_context
*bld
,
1208 LLVMValueRef ilevel
,
1209 LLVMValueRef
*out_size
,
1210 LLVMValueRef
*row_stride_vec
,
1211 LLVMValueRef
*img_stride_vec
)
1213 const unsigned dims
= bld
->dims
;
1214 LLVMValueRef ilevel_vec
;
1217 * Compute width, height, depth at mipmap level 'ilevel'
1219 if (bld
->num_mips
== 1) {
1220 ilevel_vec
= lp_build_broadcast_scalar(&bld
->int_size_bld
, ilevel
);
1221 *out_size
= lp_build_minify(&bld
->int_size_bld
, bld
->int_size
, ilevel_vec
, TRUE
);
1224 LLVMValueRef int_size_vec
;
1225 LLVMValueRef tmp
[LP_MAX_VECTOR_LENGTH
];
1226 unsigned num_quads
= bld
->coord_bld
.type
.length
/ 4;
1229 if (bld
->num_mips
== num_quads
) {
1231 * XXX: this should be #ifndef SANE_INSTRUCTION_SET.
1232 * intel "forgot" the variable shift count instruction until avx2.
1233 * A harmless 8x32 shift gets translated into 32 instructions
1234 * (16 extracts, 8 scalar shifts, 8 inserts), llvm is apparently
1235 * unable to recognize if there are really just 2 different shift
1236 * count values. So do the shift 4-wide before expansion.
1238 struct lp_build_context bld4
;
1239 struct lp_type type4
;
1241 type4
= bld
->int_coord_bld
.type
;
1244 lp_build_context_init(&bld4
, bld
->gallivm
, type4
);
1246 if (bld
->dims
== 1) {
1247 assert(bld
->int_size_in_bld
.type
.length
== 1);
1248 int_size_vec
= lp_build_broadcast_scalar(&bld4
,
1252 assert(bld
->int_size_in_bld
.type
.length
== 4);
1253 int_size_vec
= bld
->int_size
;
1256 for (i
= 0; i
< num_quads
; i
++) {
1257 LLVMValueRef ileveli
;
1258 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1260 ileveli
= lp_build_extract_broadcast(bld
->gallivm
,
1261 bld
->leveli_bld
.type
,
1265 tmp
[i
] = lp_build_minify(&bld4
, int_size_vec
, ileveli
, TRUE
);
1268 * out_size is [w0, h0, d0, _, w1, h1, d1, _, ...] vector for dims > 1,
1269 * [w0, w0, w0, w0, w1, w1, w1, w1, ...] otherwise.
1271 *out_size
= lp_build_concat(bld
->gallivm
,
1277 /* FIXME: this is terrible and results in _huge_ vector
1278 * (for the dims > 1 case).
1279 * Should refactor this (together with extract_image_sizes) and do
1280 * something more useful. Could for instance if we have width,height
1281 * with 4-wide vector pack all elements into a 8xi16 vector
1282 * (on which we can still do useful math) instead of using a 16xi32
1284 * For dims == 1 this will create [w0, w1, w2, w3, ...] vector.
1285 * For dims > 1 this will create [w0, h0, d0, _, w1, h1, d1, _, ...] vector.
1287 assert(bld
->num_mips
== bld
->coord_bld
.type
.length
);
1288 if (bld
->dims
== 1) {
1289 assert(bld
->int_size_in_bld
.type
.length
== 1);
1290 int_size_vec
= lp_build_broadcast_scalar(&bld
->int_coord_bld
,
1292 *out_size
= lp_build_minify(&bld
->int_coord_bld
, int_size_vec
, ilevel
, FALSE
);
1295 LLVMValueRef ilevel1
;
1296 for (i
= 0; i
< bld
->num_mips
; i
++) {
1297 LLVMValueRef indexi
= lp_build_const_int32(bld
->gallivm
, i
);
1298 ilevel1
= lp_build_extract_broadcast(bld
->gallivm
, bld
->int_coord_type
,
1299 bld
->int_size_in_bld
.type
, ilevel
, indexi
);
1300 tmp
[i
] = bld
->int_size
;
1301 tmp
[i
] = lp_build_minify(&bld
->int_size_in_bld
, tmp
[i
], ilevel1
, TRUE
);
1303 *out_size
= lp_build_concat(bld
->gallivm
, tmp
,
1304 bld
->int_size_in_bld
.type
,
1311 *row_stride_vec
= lp_build_get_level_stride_vec(bld
,
1312 bld
->row_stride_array
,
1316 bld
->static_texture_state
->target
== PIPE_TEXTURE_CUBE
||
1317 bld
->static_texture_state
->target
== PIPE_TEXTURE_1D_ARRAY
||
1318 bld
->static_texture_state
->target
== PIPE_TEXTURE_2D_ARRAY
) {
1319 *img_stride_vec
= lp_build_get_level_stride_vec(bld
,
1320 bld
->img_stride_array
,
1327 * Extract and broadcast texture size.
1329 * @param size_type type of the texture size vector (either
1330 * bld->int_size_type or bld->float_size_type)
1331 * @param coord_type type of the texture size vector (either
1332 * bld->int_coord_type or bld->coord_type)
1333 * @param size vector with the texture size (width, height, depth)
1336 lp_build_extract_image_sizes(struct lp_build_sample_context
*bld
,
1337 struct lp_build_context
*size_bld
,
1338 struct lp_type coord_type
,
1340 LLVMValueRef
*out_width
,
1341 LLVMValueRef
*out_height
,
1342 LLVMValueRef
*out_depth
)
1344 const unsigned dims
= bld
->dims
;
1345 LLVMTypeRef i32t
= LLVMInt32TypeInContext(bld
->gallivm
->context
);
1346 struct lp_type size_type
= size_bld
->type
;
1348 if (bld
->num_mips
== 1) {
1349 *out_width
= lp_build_extract_broadcast(bld
->gallivm
,
1353 LLVMConstInt(i32t
, 0, 0));
1355 *out_height
= lp_build_extract_broadcast(bld
->gallivm
,
1359 LLVMConstInt(i32t
, 1, 0));
1361 *out_depth
= lp_build_extract_broadcast(bld
->gallivm
,
1365 LLVMConstInt(i32t
, 2, 0));
1370 unsigned num_quads
= bld
->coord_bld
.type
.length
/ 4;
1375 else if (bld
->num_mips
== num_quads
) {
1376 *out_width
= lp_build_swizzle_scalar_aos(size_bld
, size
, 0, 4);
1378 *out_height
= lp_build_swizzle_scalar_aos(size_bld
, size
, 1, 4);
1380 *out_depth
= lp_build_swizzle_scalar_aos(size_bld
, size
, 2, 4);
1385 assert(bld
->num_mips
== bld
->coord_type
.length
);
1386 *out_width
= lp_build_pack_aos_scalars(bld
->gallivm
, size_type
,
1387 coord_type
, size
, 0);
1389 *out_height
= lp_build_pack_aos_scalars(bld
->gallivm
, size_type
,
1390 coord_type
, size
, 1);
1392 *out_depth
= lp_build_pack_aos_scalars(bld
->gallivm
, size_type
,
1393 coord_type
, size
, 2);
1402 * Unnormalize coords.
1404 * @param flt_size vector with the integer texture size (width, height, depth)
1407 lp_build_unnormalized_coords(struct lp_build_sample_context
*bld
,
1408 LLVMValueRef flt_size
,
1413 const unsigned dims
= bld
->dims
;
1415 LLVMValueRef height
;
1418 lp_build_extract_image_sizes(bld
,
1419 &bld
->float_size_bld
,
1426 /* s = s * width, t = t * height */
1427 *s
= lp_build_mul(&bld
->coord_bld
, *s
, width
);
1429 *t
= lp_build_mul(&bld
->coord_bld
, *t
, height
);
1431 *r
= lp_build_mul(&bld
->coord_bld
, *r
, depth
);
1437 * Generate new coords and faces for cubemap texels falling off the face.
1439 * @param face face (center) of the pixel
1440 * @param x0 lower x coord
1441 * @param x1 higher x coord (must be x0 + 1)
1442 * @param y0 lower y coord
1443 * @param y1 higher y coord (must be x0 + 1)
1444 * @param max_coord texture cube (level) size - 1
1445 * @param next_faces new face values when falling off
1446 * @param next_xcoords new x coord values when falling off
1447 * @param next_ycoords new y coord values when falling off
1449 * The arrays hold the new values when under/overflow of
1450 * lower x, higher x, lower y, higher y coord would occur (in this order).
1451 * next_xcoords/next_ycoords have two entries each (for both new lower and
1455 lp_build_cube_new_coords(struct lp_build_context
*ivec_bld
,
1461 LLVMValueRef max_coord
,
1462 LLVMValueRef next_faces
[4],
1463 LLVMValueRef next_xcoords
[4][2],
1464 LLVMValueRef next_ycoords
[4][2])
1467 * Lookup tables aren't nice for simd code hence try some logic here.
1468 * (Note that while it would not be necessary to do per-sample (4) lookups
1469 * when using a LUT as it's impossible that texels fall off of positive
1470 * and negative edges simultaneously, it would however be necessary to
1471 * do 2 lookups for corner handling as in this case texels both fall off
1475 * Next faces (for face 012345):
1480 * Hence nfx+ (and nfy+) == nfx- (nfy-) xor 1
1481 * nfx-: face > 1 ? (face == 5 ? 0 : 1) : (4 + face & 1)
1482 * nfy+: face & ~4 > 1 ? face + 2 : 3;
1483 * This could also use pshufb instead, but would need (manually coded)
1484 * ssse3 intrinsic (llvm won't do non-constant shuffles).
1486 struct gallivm_state
*gallivm
= ivec_bld
->gallivm
;
1487 LLVMValueRef sel
, sel_f2345
, sel_f23
, sel_f2
, tmpsel
, tmp
;
1488 LLVMValueRef faceand1
, sel_fand1
, maxmx0
, maxmx1
, maxmy0
, maxmy1
;
1489 LLVMValueRef c2
= lp_build_const_int_vec(gallivm
, ivec_bld
->type
, 2);
1490 LLVMValueRef c3
= lp_build_const_int_vec(gallivm
, ivec_bld
->type
, 3);
1491 LLVMValueRef c4
= lp_build_const_int_vec(gallivm
, ivec_bld
->type
, 4);
1492 LLVMValueRef c5
= lp_build_const_int_vec(gallivm
, ivec_bld
->type
, 5);
1494 sel
= lp_build_cmp(ivec_bld
, PIPE_FUNC_EQUAL
, face
, c5
);
1495 tmpsel
= lp_build_select(ivec_bld
, sel
, ivec_bld
->zero
, ivec_bld
->one
);
1496 sel_f2345
= lp_build_cmp(ivec_bld
, PIPE_FUNC_GREATER
, face
, ivec_bld
->one
);
1497 faceand1
= lp_build_and(ivec_bld
, face
, ivec_bld
->one
);
1498 tmp
= lp_build_add(ivec_bld
, faceand1
, c4
);
1499 next_faces
[0] = lp_build_select(ivec_bld
, sel_f2345
, tmpsel
, tmp
);
1500 next_faces
[1] = lp_build_xor(ivec_bld
, next_faces
[0], ivec_bld
->one
);
1502 tmp
= lp_build_andnot(ivec_bld
, face
, c4
);
1503 sel_f23
= lp_build_cmp(ivec_bld
, PIPE_FUNC_GREATER
, tmp
, ivec_bld
->one
);
1504 tmp
= lp_build_add(ivec_bld
, face
, c2
);
1505 next_faces
[3] = lp_build_select(ivec_bld
, sel_f23
, tmp
, c3
);
1506 next_faces
[2] = lp_build_xor(ivec_bld
, next_faces
[3], ivec_bld
->one
);
1509 * new xcoords (for face 012345):
1510 * x < 0.0 : max max t max-t max max
1511 * x >= 1.0 : 0 0 max-t t 0 0
1512 * y < 0.0 : max 0 max-s s s max-s
1513 * y >= 1.0 : max 0 s max-s s max-s
1515 * ncx[1] = face & ~4 > 1 ? (face == 2 ? max-t : t) : 0
1516 * ncx[0] = max - ncx[1]
1517 * ncx[3] = face > 1 ? (face & 1 ? max-s : s) : (face & 1) ? 0 : max
1518 * ncx[2] = face & ~4 > 1 ? max - ncx[3] : ncx[3]
1520 sel_f2
= lp_build_cmp(ivec_bld
, PIPE_FUNC_EQUAL
, face
, c2
);
1521 maxmy0
= lp_build_sub(ivec_bld
, max_coord
, y0
);
1522 tmp
= lp_build_select(ivec_bld
, sel_f2
, maxmy0
, y0
);
1523 next_xcoords
[1][0] = lp_build_select(ivec_bld
, sel_f23
, tmp
, ivec_bld
->zero
);
1524 next_xcoords
[0][0] = lp_build_sub(ivec_bld
, max_coord
, next_xcoords
[1][0]);
1525 maxmy1
= lp_build_sub(ivec_bld
, max_coord
, y1
);
1526 tmp
= lp_build_select(ivec_bld
, sel_f2
, maxmy1
, y1
);
1527 next_xcoords
[1][1] = lp_build_select(ivec_bld
, sel_f23
, tmp
, ivec_bld
->zero
);
1528 next_xcoords
[0][1] = lp_build_sub(ivec_bld
, max_coord
, next_xcoords
[1][1]);
1530 sel_fand1
= lp_build_cmp(ivec_bld
, PIPE_FUNC_EQUAL
, faceand1
, ivec_bld
->one
);
1532 tmpsel
= lp_build_select(ivec_bld
, sel_fand1
, ivec_bld
->zero
, max_coord
);
1533 maxmx0
= lp_build_sub(ivec_bld
, max_coord
, x0
);
1534 tmp
= lp_build_select(ivec_bld
, sel_fand1
, maxmx0
, x0
);
1535 next_xcoords
[3][0] = lp_build_select(ivec_bld
, sel_f2345
, tmp
, tmpsel
);
1536 tmp
= lp_build_sub(ivec_bld
, max_coord
, next_xcoords
[3][0]);
1537 next_xcoords
[2][0] = lp_build_select(ivec_bld
, sel_f23
, tmp
, next_xcoords
[3][0]);
1538 maxmx1
= lp_build_sub(ivec_bld
, max_coord
, x1
);
1539 tmp
= lp_build_select(ivec_bld
, sel_fand1
, maxmx1
, x1
);
1540 next_xcoords
[3][1] = lp_build_select(ivec_bld
, sel_f2345
, tmp
, tmpsel
);
1541 tmp
= lp_build_sub(ivec_bld
, max_coord
, next_xcoords
[3][1]);
1542 next_xcoords
[2][1] = lp_build_select(ivec_bld
, sel_f23
, tmp
, next_xcoords
[3][1]);
1545 * new ycoords (for face 012345):
1546 * x < 0.0 : t t 0 max t t
1547 * x >= 1.0 : t t 0 max t t
1548 * y < 0.0 : max-s s 0 max max 0
1549 * y >= 1.0 : s max-s 0 max 0 max
1551 * ncy[0] = face & ~4 > 1 ? (face == 2 ? 0 : max) : t
1553 * ncy[3] = face > 1 ? (face & 1 ? max : 0) : (face & 1) ? max-s : max
1554 * ncx[2] = face & ~4 > 1 ? max - ncx[3] : ncx[3]
1556 tmp
= lp_build_select(ivec_bld
, sel_f2
, ivec_bld
->zero
, max_coord
);
1557 next_ycoords
[0][0] = lp_build_select(ivec_bld
, sel_f23
, tmp
, y0
);
1558 next_ycoords
[1][0] = next_ycoords
[0][0];
1559 next_ycoords
[0][1] = lp_build_select(ivec_bld
, sel_f23
, tmp
, y1
);
1560 next_ycoords
[1][1] = next_ycoords
[0][1];
1562 tmpsel
= lp_build_select(ivec_bld
, sel_fand1
, maxmx0
, x0
);
1563 tmp
= lp_build_select(ivec_bld
, sel_fand1
, max_coord
, ivec_bld
->zero
);
1564 next_ycoords
[3][0] = lp_build_select(ivec_bld
, sel_f2345
, tmp
, tmpsel
);
1565 tmp
= lp_build_sub(ivec_bld
, max_coord
, next_ycoords
[3][0]);
1566 next_ycoords
[2][0] = lp_build_select(ivec_bld
, sel_f23
, next_ycoords
[3][0], tmp
);
1567 tmpsel
= lp_build_select(ivec_bld
, sel_fand1
, maxmx1
, x1
);
1568 tmp
= lp_build_select(ivec_bld
, sel_fand1
, max_coord
, ivec_bld
->zero
);
1569 next_ycoords
[3][1] = lp_build_select(ivec_bld
, sel_f2345
, tmp
, tmpsel
);
1570 tmp
= lp_build_sub(ivec_bld
, max_coord
, next_ycoords
[3][1]);
1571 next_ycoords
[2][1] = lp_build_select(ivec_bld
, sel_f23
, next_ycoords
[3][1], tmp
);
1575 /** Helper used by lp_build_cube_lookup() */
1577 lp_build_cube_imapos(struct lp_build_context
*coord_bld
, LLVMValueRef coord
)
1579 /* ima = +0.5 / abs(coord); */
1580 LLVMValueRef posHalf
= lp_build_const_vec(coord_bld
->gallivm
, coord_bld
->type
, 0.5);
1581 LLVMValueRef absCoord
= lp_build_abs(coord_bld
, coord
);
1582 LLVMValueRef ima
= lp_build_div(coord_bld
, posHalf
, absCoord
);
1587 /** Helper for doing 3-wise selection.
1588 * Returns sel1 ? val2 : (sel0 ? val0 : val1).
1591 lp_build_select3(struct lp_build_context
*sel_bld
,
1599 tmp
= lp_build_select(sel_bld
, sel0
, val0
, val1
);
1600 return lp_build_select(sel_bld
, sel1
, val2
, tmp
);
1605 * Generate code to do cube face selection and compute per-face texcoords.
1608 lp_build_cube_lookup(struct lp_build_sample_context
*bld
,
1609 LLVMValueRef
*coords
,
1610 const struct lp_derivatives
*derivs_in
, /* optional */
1612 struct lp_derivatives
*derivs_out
, /* optional */
1613 boolean need_derivs
)
1615 struct lp_build_context
*coord_bld
= &bld
->coord_bld
;
1616 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1617 struct gallivm_state
*gallivm
= bld
->gallivm
;
1618 LLVMValueRef si
, ti
, ri
;
1621 * Do per-pixel face selection. We cannot however (as we used to do)
1622 * simply calculate the derivs afterwards (which is very bogus for
1623 * explicit derivs btw) because the values would be "random" when
1624 * not all pixels lie on the same face. So what we do here is just
1625 * calculate the derivatives after scaling the coords by the absolute
1626 * value of the inverse major axis, and essentially do rho calculation
1627 * steps as if it were a 3d texture. This is perfect if all pixels hit
1628 * the same face, but not so great at edges, I believe the max error
1629 * should be sqrt(2) with no_rho_approx or 2 otherwise (essentially measuring
1630 * the 3d distance between 2 points on the cube instead of measuring up/down
1631 * the edge). Still this is possibly a win over just selecting the same face
1632 * for all pixels. Unfortunately, something like that doesn't work for
1633 * explicit derivatives.
1635 struct lp_build_context
*cint_bld
= &bld
->int_coord_bld
;
1636 struct lp_type intctype
= cint_bld
->type
;
1637 LLVMTypeRef coord_vec_type
= coord_bld
->vec_type
;
1638 LLVMTypeRef cint_vec_type
= cint_bld
->vec_type
;
1639 LLVMValueRef as
, at
, ar
, face
, face_s
, face_t
;
1640 LLVMValueRef as_ge_at
, maxasat
, ar_ge_as_at
;
1641 LLVMValueRef snewx
, tnewx
, snewy
, tnewy
, snewz
, tnewz
;
1642 LLVMValueRef tnegi
, rnegi
;
1643 LLVMValueRef ma
, mai
, signma
, signmabit
, imahalfpos
;
1644 LLVMValueRef posHalf
= lp_build_const_vec(gallivm
, coord_bld
->type
, 0.5);
1645 LLVMValueRef signmask
= lp_build_const_int_vec(gallivm
, intctype
,
1646 1 << (intctype
.width
- 1));
1647 LLVMValueRef signshift
= lp_build_const_int_vec(gallivm
, intctype
,
1649 LLVMValueRef facex
= lp_build_const_int_vec(gallivm
, intctype
, PIPE_TEX_FACE_POS_X
);
1650 LLVMValueRef facey
= lp_build_const_int_vec(gallivm
, intctype
, PIPE_TEX_FACE_POS_Y
);
1651 LLVMValueRef facez
= lp_build_const_int_vec(gallivm
, intctype
, PIPE_TEX_FACE_POS_Z
);
1652 LLVMValueRef s
= coords
[0];
1653 LLVMValueRef t
= coords
[1];
1654 LLVMValueRef r
= coords
[2];
1656 assert(PIPE_TEX_FACE_NEG_X
== PIPE_TEX_FACE_POS_X
+ 1);
1657 assert(PIPE_TEX_FACE_NEG_Y
== PIPE_TEX_FACE_POS_Y
+ 1);
1658 assert(PIPE_TEX_FACE_NEG_Z
== PIPE_TEX_FACE_POS_Z
+ 1);
1661 * get absolute value (for x/y/z face selection) and sign bit
1662 * (for mirroring minor coords and pos/neg face selection)
1663 * of the original coords.
1665 as
= lp_build_abs(&bld
->coord_bld
, s
);
1666 at
= lp_build_abs(&bld
->coord_bld
, t
);
1667 ar
= lp_build_abs(&bld
->coord_bld
, r
);
1670 * major face determination: select x if x > y else select y
1671 * select z if z >= max(x,y) else select previous result
1672 * if some axis are the same we chose z over y, y over x - the
1673 * dx10 spec seems to ask for it while OpenGL doesn't care (if we
1674 * wouldn't care could save a select or two if using different
1675 * compares and doing at_g_as_ar last since tnewx and tnewz are the
1678 as_ge_at
= lp_build_cmp(coord_bld
, PIPE_FUNC_GREATER
, as
, at
);
1679 maxasat
= lp_build_max(coord_bld
, as
, at
);
1680 ar_ge_as_at
= lp_build_cmp(coord_bld
, PIPE_FUNC_GEQUAL
, ar
, maxasat
);
1682 if (need_derivs
&& (derivs_in
||
1683 ((gallivm_debug
& GALLIVM_DEBUG_NO_QUAD_LOD
) &&
1684 (gallivm_debug
& GALLIVM_DEBUG_NO_RHO_APPROX
)))) {
1686 * XXX: This is really really complex.
1687 * It is a bit overkill to use this for implicit derivatives as well,
1688 * no way this is worth the cost in practice, but seems to be the
1689 * only way for getting accurate and per-pixel lod values.
1691 LLVMValueRef ima
, imahalf
, tmp
, ddx
[3], ddy
[3];
1692 LLVMValueRef madx
, mady
, madxdivma
, madydivma
;
1693 LLVMValueRef sdxi
, tdxi
, rdxi
, sdyi
, tdyi
, rdyi
;
1694 LLVMValueRef tdxnegi
, rdxnegi
, tdynegi
, rdynegi
;
1695 LLVMValueRef sdxnewx
, sdxnewy
, sdxnewz
, tdxnewx
, tdxnewy
, tdxnewz
;
1696 LLVMValueRef sdynewx
, sdynewy
, sdynewz
, tdynewx
, tdynewy
, tdynewz
;
1697 LLVMValueRef face_sdx
, face_tdx
, face_sdy
, face_tdy
;
1699 * s = 1/2 * ( sc / ma + 1)
1700 * t = 1/2 * ( tc / ma + 1)
1702 * s' = 1/2 * (sc' * ma - sc * ma') / ma^2
1703 * t' = 1/2 * (tc' * ma - tc * ma') / ma^2
1705 * dx.s = 0.5 * (dx.sc - sc * dx.ma / ma) / ma
1706 * dx.t = 0.5 * (dx.tc - tc * dx.ma / ma) / ma
1707 * dy.s = 0.5 * (dy.sc - sc * dy.ma / ma) / ma
1708 * dy.t = 0.5 * (dy.tc - tc * dy.ma / ma) / ma
1711 /* select ma, calculate ima */
1712 ma
= lp_build_select3(coord_bld
, as_ge_at
, ar_ge_as_at
, s
, t
, r
);
1713 mai
= LLVMBuildBitCast(builder
, ma
, cint_vec_type
, "");
1714 signmabit
= LLVMBuildAnd(builder
, mai
, signmask
, "");
1715 ima
= lp_build_div(coord_bld
, coord_bld
->one
, ma
);
1716 imahalf
= lp_build_mul(coord_bld
, posHalf
, ima
);
1717 imahalfpos
= lp_build_abs(coord_bld
, imahalf
);
1720 ddx
[0] = lp_build_ddx(coord_bld
, s
);
1721 ddx
[1] = lp_build_ddx(coord_bld
, t
);
1722 ddx
[2] = lp_build_ddx(coord_bld
, r
);
1723 ddy
[0] = lp_build_ddy(coord_bld
, s
);
1724 ddy
[1] = lp_build_ddy(coord_bld
, t
);
1725 ddy
[2] = lp_build_ddy(coord_bld
, r
);
1728 ddx
[0] = derivs_in
->ddx
[0];
1729 ddx
[1] = derivs_in
->ddx
[1];
1730 ddx
[2] = derivs_in
->ddx
[2];
1731 ddy
[0] = derivs_in
->ddy
[0];
1732 ddy
[1] = derivs_in
->ddy
[1];
1733 ddy
[2] = derivs_in
->ddy
[2];
1736 /* select major derivatives */
1737 madx
= lp_build_select3(coord_bld
, as_ge_at
, ar_ge_as_at
, ddx
[0], ddx
[1], ddx
[2]);
1738 mady
= lp_build_select3(coord_bld
, as_ge_at
, ar_ge_as_at
, ddy
[0], ddy
[1], ddy
[2]);
1740 si
= LLVMBuildBitCast(builder
, s
, cint_vec_type
, "");
1741 ti
= LLVMBuildBitCast(builder
, t
, cint_vec_type
, "");
1742 ri
= LLVMBuildBitCast(builder
, r
, cint_vec_type
, "");
1744 sdxi
= LLVMBuildBitCast(builder
, ddx
[0], cint_vec_type
, "");
1745 tdxi
= LLVMBuildBitCast(builder
, ddx
[1], cint_vec_type
, "");
1746 rdxi
= LLVMBuildBitCast(builder
, ddx
[2], cint_vec_type
, "");
1748 sdyi
= LLVMBuildBitCast(builder
, ddy
[0], cint_vec_type
, "");
1749 tdyi
= LLVMBuildBitCast(builder
, ddy
[1], cint_vec_type
, "");
1750 rdyi
= LLVMBuildBitCast(builder
, ddy
[2], cint_vec_type
, "");
1753 * compute all possible new s/t coords, which does the mirroring,
1754 * and do the same for derivs minor axes.
1755 * snewx = signma * -r;
1758 * tnewy = signma * r;
1759 * snewz = signma * s;
1762 tnegi
= LLVMBuildXor(builder
, ti
, signmask
, "");
1763 rnegi
= LLVMBuildXor(builder
, ri
, signmask
, "");
1764 tdxnegi
= LLVMBuildXor(builder
, tdxi
, signmask
, "");
1765 rdxnegi
= LLVMBuildXor(builder
, rdxi
, signmask
, "");
1766 tdynegi
= LLVMBuildXor(builder
, tdyi
, signmask
, "");
1767 rdynegi
= LLVMBuildXor(builder
, rdyi
, signmask
, "");
1769 snewx
= LLVMBuildXor(builder
, signmabit
, rnegi
, "");
1771 sdxnewx
= LLVMBuildXor(builder
, signmabit
, rdxnegi
, "");
1773 sdynewx
= LLVMBuildXor(builder
, signmabit
, rdynegi
, "");
1777 tnewy
= LLVMBuildXor(builder
, signmabit
, ri
, "");
1779 tdxnewy
= LLVMBuildXor(builder
, signmabit
, rdxi
, "");
1781 tdynewy
= LLVMBuildXor(builder
, signmabit
, rdyi
, "");
1783 snewz
= LLVMBuildXor(builder
, signmabit
, si
, "");
1785 sdxnewz
= LLVMBuildXor(builder
, signmabit
, sdxi
, "");
1787 sdynewz
= LLVMBuildXor(builder
, signmabit
, sdyi
, "");
1790 /* select the mirrored values */
1791 face
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, facex
, facey
, facez
);
1792 face_s
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, snewx
, snewy
, snewz
);
1793 face_t
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, tnewx
, tnewy
, tnewz
);
1794 face_sdx
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, sdxnewx
, sdxnewy
, sdxnewz
);
1795 face_tdx
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, tdxnewx
, tdxnewy
, tdxnewz
);
1796 face_sdy
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, sdynewx
, sdynewy
, sdynewz
);
1797 face_tdy
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, tdynewx
, tdynewy
, tdynewz
);
1799 face_s
= LLVMBuildBitCast(builder
, face_s
, coord_vec_type
, "");
1800 face_t
= LLVMBuildBitCast(builder
, face_t
, coord_vec_type
, "");
1801 face_sdx
= LLVMBuildBitCast(builder
, face_sdx
, coord_vec_type
, "");
1802 face_tdx
= LLVMBuildBitCast(builder
, face_tdx
, coord_vec_type
, "");
1803 face_sdy
= LLVMBuildBitCast(builder
, face_sdy
, coord_vec_type
, "");
1804 face_tdy
= LLVMBuildBitCast(builder
, face_tdy
, coord_vec_type
, "");
1806 /* deriv math, dx.s = 0.5 * (dx.sc - sc * dx.ma / ma) / ma */
1807 madxdivma
= lp_build_mul(coord_bld
, madx
, ima
);
1808 tmp
= lp_build_mul(coord_bld
, madxdivma
, face_s
);
1809 tmp
= lp_build_sub(coord_bld
, face_sdx
, tmp
);
1810 derivs_out
->ddx
[0] = lp_build_mul(coord_bld
, tmp
, imahalf
);
1812 /* dx.t = 0.5 * (dx.tc - tc * dx.ma / ma) / ma */
1813 tmp
= lp_build_mul(coord_bld
, madxdivma
, face_t
);
1814 tmp
= lp_build_sub(coord_bld
, face_tdx
, tmp
);
1815 derivs_out
->ddx
[1] = lp_build_mul(coord_bld
, tmp
, imahalf
);
1817 /* dy.s = 0.5 * (dy.sc - sc * dy.ma / ma) / ma */
1818 madydivma
= lp_build_mul(coord_bld
, mady
, ima
);
1819 tmp
= lp_build_mul(coord_bld
, madydivma
, face_s
);
1820 tmp
= lp_build_sub(coord_bld
, face_sdy
, tmp
);
1821 derivs_out
->ddy
[0] = lp_build_mul(coord_bld
, tmp
, imahalf
);
1823 /* dy.t = 0.5 * (dy.tc - tc * dy.ma / ma) / ma */
1824 tmp
= lp_build_mul(coord_bld
, madydivma
, face_t
);
1825 tmp
= lp_build_sub(coord_bld
, face_tdy
, tmp
);
1826 derivs_out
->ddy
[1] = lp_build_mul(coord_bld
, tmp
, imahalf
);
1828 signma
= LLVMBuildLShr(builder
, mai
, signshift
, "");
1829 coords
[2] = LLVMBuildOr(builder
, face
, signma
, "face");
1831 /* project coords */
1832 face_s
= lp_build_mul(coord_bld
, face_s
, imahalfpos
);
1833 face_t
= lp_build_mul(coord_bld
, face_t
, imahalfpos
);
1835 coords
[0] = lp_build_add(coord_bld
, face_s
, posHalf
);
1836 coords
[1] = lp_build_add(coord_bld
, face_t
, posHalf
);
1841 else if (need_derivs
) {
1842 LLVMValueRef ddx_ddy
[2], tmp
[3], rho_vec
;
1843 static const unsigned char swizzle0
[] = { /* no-op swizzle */
1844 0, LP_BLD_SWIZZLE_DONTCARE
,
1845 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
1847 static const unsigned char swizzle1
[] = {
1848 1, LP_BLD_SWIZZLE_DONTCARE
,
1849 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
1851 static const unsigned char swizzle01
[] = { /* no-op swizzle */
1853 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
1855 static const unsigned char swizzle23
[] = {
1857 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
1859 static const unsigned char swizzle02
[] = {
1861 LP_BLD_SWIZZLE_DONTCARE
, LP_BLD_SWIZZLE_DONTCARE
1865 * scale the s/t/r coords pre-select/mirror so we can calculate
1866 * "reasonable" derivs.
1868 ma
= lp_build_select3(coord_bld
, as_ge_at
, ar_ge_as_at
, s
, t
, r
);
1869 imahalfpos
= lp_build_cube_imapos(coord_bld
, ma
);
1870 s
= lp_build_mul(coord_bld
, s
, imahalfpos
);
1871 t
= lp_build_mul(coord_bld
, t
, imahalfpos
);
1872 r
= lp_build_mul(coord_bld
, r
, imahalfpos
);
1875 * This isn't quite the same as the "ordinary" (3d deriv) path since we
1876 * know the texture is square which simplifies things (we can omit the
1877 * size mul which happens very early completely here and do it at the
1879 * Also always do calculations according to GALLIVM_DEBUG_NO_RHO_APPROX
1880 * since the error can get quite big otherwise at edges.
1881 * (With no_rho_approx max error is sqrt(2) at edges, same as it is
1882 * without no_rho_approx for 2d textures, otherwise it would be factor 2.)
1884 ddx_ddy
[0] = lp_build_packed_ddx_ddy_twocoord(coord_bld
, s
, t
);
1885 ddx_ddy
[1] = lp_build_packed_ddx_ddy_onecoord(coord_bld
, r
);
1887 ddx_ddy
[0] = lp_build_mul(coord_bld
, ddx_ddy
[0], ddx_ddy
[0]);
1888 ddx_ddy
[1] = lp_build_mul(coord_bld
, ddx_ddy
[1], ddx_ddy
[1]);
1890 tmp
[0] = lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle01
);
1891 tmp
[1] = lp_build_swizzle_aos(coord_bld
, ddx_ddy
[0], swizzle23
);
1892 tmp
[2] = lp_build_swizzle_aos(coord_bld
, ddx_ddy
[1], swizzle02
);
1894 rho_vec
= lp_build_add(coord_bld
, tmp
[0], tmp
[1]);
1895 rho_vec
= lp_build_add(coord_bld
, rho_vec
, tmp
[2]);
1897 tmp
[0] = lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle0
);
1898 tmp
[1] = lp_build_swizzle_aos(coord_bld
, rho_vec
, swizzle1
);
1899 *rho
= lp_build_max(coord_bld
, tmp
[0], tmp
[1]);
1903 ma
= lp_build_select3(coord_bld
, as_ge_at
, ar_ge_as_at
, s
, t
, r
);
1905 mai
= LLVMBuildBitCast(builder
, ma
, cint_vec_type
, "");
1906 signmabit
= LLVMBuildAnd(builder
, mai
, signmask
, "");
1908 si
= LLVMBuildBitCast(builder
, s
, cint_vec_type
, "");
1909 ti
= LLVMBuildBitCast(builder
, t
, cint_vec_type
, "");
1910 ri
= LLVMBuildBitCast(builder
, r
, cint_vec_type
, "");
1913 * compute all possible new s/t coords, which does the mirroring
1914 * snewx = signma * -r;
1917 * tnewy = signma * r;
1918 * snewz = signma * s;
1921 tnegi
= LLVMBuildXor(builder
, ti
, signmask
, "");
1922 rnegi
= LLVMBuildXor(builder
, ri
, signmask
, "");
1924 snewx
= LLVMBuildXor(builder
, signmabit
, rnegi
, "");
1928 tnewy
= LLVMBuildXor(builder
, signmabit
, ri
, "");
1930 snewz
= LLVMBuildXor(builder
, signmabit
, si
, "");
1933 /* select the mirrored values */
1934 face_s
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, snewx
, snewy
, snewz
);
1935 face_t
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, tnewx
, tnewy
, tnewz
);
1936 face
= lp_build_select3(cint_bld
, as_ge_at
, ar_ge_as_at
, facex
, facey
, facez
);
1938 face_s
= LLVMBuildBitCast(builder
, face_s
, coord_vec_type
, "");
1939 face_t
= LLVMBuildBitCast(builder
, face_t
, coord_vec_type
, "");
1941 /* add +1 for neg face */
1942 /* XXX with AVX probably want to use another select here -
1943 * as long as we ensure vblendvps gets used we can actually
1944 * skip the comparison and just use sign as a "mask" directly.
1946 signma
= LLVMBuildLShr(builder
, mai
, signshift
, "");
1947 coords
[2] = LLVMBuildOr(builder
, face
, signma
, "face");
1949 /* project coords */
1951 imahalfpos
= lp_build_cube_imapos(coord_bld
, ma
);
1952 face_s
= lp_build_mul(coord_bld
, face_s
, imahalfpos
);
1953 face_t
= lp_build_mul(coord_bld
, face_t
, imahalfpos
);
1956 coords
[0] = lp_build_add(coord_bld
, face_s
, posHalf
);
1957 coords
[1] = lp_build_add(coord_bld
, face_t
, posHalf
);
1962 * Compute the partial offset of a pixel block along an arbitrary axis.
1964 * @param coord coordinate in pixels
1965 * @param stride number of bytes between rows of successive pixel blocks
1966 * @param block_length number of pixels in a pixels block along the coordinate
1968 * @param out_offset resulting relative offset of the pixel block in bytes
1969 * @param out_subcoord resulting sub-block pixel coordinate
1972 lp_build_sample_partial_offset(struct lp_build_context
*bld
,
1973 unsigned block_length
,
1975 LLVMValueRef stride
,
1976 LLVMValueRef
*out_offset
,
1977 LLVMValueRef
*out_subcoord
)
1979 LLVMBuilderRef builder
= bld
->gallivm
->builder
;
1980 LLVMValueRef offset
;
1981 LLVMValueRef subcoord
;
1983 if (block_length
== 1) {
1984 subcoord
= bld
->zero
;
1988 * Pixel blocks have power of two dimensions. LLVM should convert the
1989 * rem/div to bit arithmetic.
1990 * TODO: Verify this.
1991 * It does indeed BUT it does transform it to scalar (and back) when doing so
1992 * (using roughly extract, shift/and, mov, unpack) (llvm 2.7).
1993 * The generated code looks seriously unfunny and is quite expensive.
1996 LLVMValueRef block_width
= lp_build_const_int_vec(bld
->type
, block_length
);
1997 subcoord
= LLVMBuildURem(builder
, coord
, block_width
, "");
1998 coord
= LLVMBuildUDiv(builder
, coord
, block_width
, "");
2000 unsigned logbase2
= util_logbase2(block_length
);
2001 LLVMValueRef block_shift
= lp_build_const_int_vec(bld
->gallivm
, bld
->type
, logbase2
);
2002 LLVMValueRef block_mask
= lp_build_const_int_vec(bld
->gallivm
, bld
->type
, block_length
- 1);
2003 subcoord
= LLVMBuildAnd(builder
, coord
, block_mask
, "");
2004 coord
= LLVMBuildLShr(builder
, coord
, block_shift
, "");
2008 offset
= lp_build_mul(bld
, coord
, stride
);
2011 assert(out_subcoord
);
2013 *out_offset
= offset
;
2014 *out_subcoord
= subcoord
;
2019 * Compute the offset of a pixel block.
2021 * x, y, z, y_stride, z_stride are vectors, and they refer to pixels.
2023 * Returns the relative offset and i,j sub-block coordinates
2026 lp_build_sample_offset(struct lp_build_context
*bld
,
2027 const struct util_format_description
*format_desc
,
2031 LLVMValueRef y_stride
,
2032 LLVMValueRef z_stride
,
2033 LLVMValueRef
*out_offset
,
2034 LLVMValueRef
*out_i
,
2035 LLVMValueRef
*out_j
)
2037 LLVMValueRef x_stride
;
2038 LLVMValueRef offset
;
2040 x_stride
= lp_build_const_vec(bld
->gallivm
, bld
->type
,
2041 format_desc
->block
.bits
/8);
2043 lp_build_sample_partial_offset(bld
,
2044 format_desc
->block
.width
,
2048 if (y
&& y_stride
) {
2049 LLVMValueRef y_offset
;
2050 lp_build_sample_partial_offset(bld
,
2051 format_desc
->block
.height
,
2054 offset
= lp_build_add(bld
, offset
, y_offset
);
2060 if (z
&& z_stride
) {
2061 LLVMValueRef z_offset
;
2063 lp_build_sample_partial_offset(bld
,
2064 1, /* pixel blocks are always 2D */
2067 offset
= lp_build_add(bld
, offset
, z_offset
);
2070 *out_offset
= offset
;