2 * Copyright © 2010 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
26 * This file drives the GLSL IR -> LIR translation, contains the
27 * optimizations on the LIR, and drives the generation of native code
31 #include "main/macros.h"
35 #include "brw_vec4_gs_visitor.h"
37 #include "brw_dead_control_flow.h"
38 #include "common/gen_debug.h"
39 #include "compiler/glsl_types.h"
40 #include "compiler/nir/nir_builder.h"
41 #include "program/prog_parameter.h"
42 #include "util/u_math.h"
46 static unsigned get_lowered_simd_width(const struct gen_device_info
*devinfo
,
50 fs_inst::init(enum opcode opcode
, uint8_t exec_size
, const fs_reg
&dst
,
51 const fs_reg
*src
, unsigned sources
)
53 memset((void*)this, 0, sizeof(*this));
55 this->src
= new fs_reg
[MAX2(sources
, 3)];
56 for (unsigned i
= 0; i
< sources
; i
++)
57 this->src
[i
] = src
[i
];
59 this->opcode
= opcode
;
61 this->sources
= sources
;
62 this->exec_size
= exec_size
;
65 assert(dst
.file
!= IMM
&& dst
.file
!= UNIFORM
);
67 assert(this->exec_size
!= 0);
69 this->conditional_mod
= BRW_CONDITIONAL_NONE
;
71 /* This will be the case for almost all instructions. */
78 this->size_written
= dst
.component_size(exec_size
);
81 this->size_written
= 0;
85 unreachable("Invalid destination register file");
88 this->writes_accumulator
= false;
93 init(BRW_OPCODE_NOP
, 8, dst
, NULL
, 0);
96 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_size
)
98 init(opcode
, exec_size
, reg_undef
, NULL
, 0);
101 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_size
, const fs_reg
&dst
)
103 init(opcode
, exec_size
, dst
, NULL
, 0);
106 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_size
, const fs_reg
&dst
,
109 const fs_reg src
[1] = { src0
};
110 init(opcode
, exec_size
, dst
, src
, 1);
113 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_size
, const fs_reg
&dst
,
114 const fs_reg
&src0
, const fs_reg
&src1
)
116 const fs_reg src
[2] = { src0
, src1
};
117 init(opcode
, exec_size
, dst
, src
, 2);
120 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_size
, const fs_reg
&dst
,
121 const fs_reg
&src0
, const fs_reg
&src1
, const fs_reg
&src2
)
123 const fs_reg src
[3] = { src0
, src1
, src2
};
124 init(opcode
, exec_size
, dst
, src
, 3);
127 fs_inst::fs_inst(enum opcode opcode
, uint8_t exec_width
, const fs_reg
&dst
,
128 const fs_reg src
[], unsigned sources
)
130 init(opcode
, exec_width
, dst
, src
, sources
);
133 fs_inst::fs_inst(const fs_inst
&that
)
135 memcpy((void*)this, &that
, sizeof(that
));
137 this->src
= new fs_reg
[MAX2(that
.sources
, 3)];
139 for (unsigned i
= 0; i
< that
.sources
; i
++)
140 this->src
[i
] = that
.src
[i
];
149 fs_inst::resize_sources(uint8_t num_sources
)
151 if (this->sources
!= num_sources
) {
152 fs_reg
*src
= new fs_reg
[MAX2(num_sources
, 3)];
154 for (unsigned i
= 0; i
< MIN2(this->sources
, num_sources
); ++i
)
155 src
[i
] = this->src
[i
];
159 this->sources
= num_sources
;
164 fs_visitor::VARYING_PULL_CONSTANT_LOAD(const fs_builder
&bld
,
166 const fs_reg
&surf_index
,
167 const fs_reg
&varying_offset
,
168 uint32_t const_offset
)
170 /* We have our constant surface use a pitch of 4 bytes, so our index can
171 * be any component of a vector, and then we load 4 contiguous
172 * components starting from that.
174 * We break down the const_offset to a portion added to the variable offset
175 * and a portion done using fs_reg::offset, which means that if you have
176 * GLSL using something like "uniform vec4 a[20]; gl_FragColor = a[i]",
177 * we'll temporarily generate 4 vec4 loads from offset i * 4, and CSE can
178 * later notice that those loads are all the same and eliminate the
181 fs_reg vec4_offset
= vgrf(glsl_type::uint_type
);
182 bld
.ADD(vec4_offset
, varying_offset
, brw_imm_ud(const_offset
& ~0xf));
184 /* The pull load message will load a vec4 (16 bytes). If we are loading
185 * a double this means we are only loading 2 elements worth of data.
186 * We also want to use a 32-bit data type for the dst of the load operation
187 * so other parts of the driver don't get confused about the size of the
190 fs_reg vec4_result
= bld
.vgrf(BRW_REGISTER_TYPE_F
, 4);
191 fs_inst
*inst
= bld
.emit(FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_LOGICAL
,
192 vec4_result
, surf_index
, vec4_offset
);
193 inst
->size_written
= 4 * vec4_result
.component_size(inst
->exec_size
);
195 shuffle_from_32bit_read(bld
, dst
, vec4_result
,
196 (const_offset
& 0xf) / type_sz(dst
.type
), 1);
200 * A helper for MOV generation for fixing up broken hardware SEND dependency
204 fs_visitor::DEP_RESOLVE_MOV(const fs_builder
&bld
, int grf
)
206 /* The caller always wants uncompressed to emit the minimal extra
207 * dependencies, and to avoid having to deal with aligning its regs to 2.
209 const fs_builder ubld
= bld
.annotate("send dependency resolve")
212 ubld
.MOV(ubld
.null_reg_f(), fs_reg(VGRF
, grf
, BRW_REGISTER_TYPE_F
));
216 fs_inst::is_send_from_grf() const
219 case SHADER_OPCODE_SEND
:
220 case SHADER_OPCODE_SHADER_TIME_ADD
:
221 case FS_OPCODE_INTERPOLATE_AT_SAMPLE
:
222 case FS_OPCODE_INTERPOLATE_AT_SHARED_OFFSET
:
223 case FS_OPCODE_INTERPOLATE_AT_PER_SLOT_OFFSET
:
224 case SHADER_OPCODE_UNTYPED_ATOMIC
:
225 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT
:
226 case SHADER_OPCODE_UNTYPED_SURFACE_READ
:
227 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE
:
228 case SHADER_OPCODE_BYTE_SCATTERED_WRITE
:
229 case SHADER_OPCODE_BYTE_SCATTERED_READ
:
230 case SHADER_OPCODE_TYPED_ATOMIC
:
231 case SHADER_OPCODE_TYPED_SURFACE_READ
:
232 case SHADER_OPCODE_TYPED_SURFACE_WRITE
:
233 case SHADER_OPCODE_IMAGE_SIZE
:
234 case SHADER_OPCODE_URB_WRITE_SIMD8
:
235 case SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT
:
236 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED
:
237 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT
:
238 case SHADER_OPCODE_URB_READ_SIMD8
:
239 case SHADER_OPCODE_URB_READ_SIMD8_PER_SLOT
:
241 case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD
:
242 return src
[1].file
== VGRF
;
243 case FS_OPCODE_FB_WRITE
:
244 case FS_OPCODE_FB_READ
:
245 return src
[0].file
== VGRF
;
248 return src
[0].file
== VGRF
;
255 * Returns true if this instruction's sources and destinations cannot
256 * safely be the same register.
258 * In most cases, a register can be written over safely by the same
259 * instruction that is its last use. For a single instruction, the
260 * sources are dereferenced before writing of the destination starts
263 * However, there are a few cases where this can be problematic:
265 * - Virtual opcodes that translate to multiple instructions in the
266 * code generator: if src == dst and one instruction writes the
267 * destination before a later instruction reads the source, then
268 * src will have been clobbered.
270 * - SIMD16 compressed instructions with certain regioning (see below).
272 * The register allocator uses this information to set up conflicts between
273 * GRF sources and the destination.
276 fs_inst::has_source_and_destination_hazard() const
279 case FS_OPCODE_PACK_HALF_2x16_SPLIT
:
280 /* Multiple partial writes to the destination */
282 case SHADER_OPCODE_SHUFFLE
:
283 /* This instruction returns an arbitrary channel from the source and
284 * gets split into smaller instructions in the generator. It's possible
285 * that one of the instructions will read from a channel corresponding
286 * to an earlier instruction.
288 case SHADER_OPCODE_SEL_EXEC
:
289 /* This is implemented as
291 * mov(16) g4<1>D 0D { align1 WE_all 1H };
292 * mov(16) g4<1>D g5<8,8,1>D { align1 1H }
294 * Because the source is only read in the second instruction, the first
295 * may stomp all over it.
298 case SHADER_OPCODE_QUAD_SWIZZLE
:
300 case BRW_SWIZZLE_XXXX
:
301 case BRW_SWIZZLE_YYYY
:
302 case BRW_SWIZZLE_ZZZZ
:
303 case BRW_SWIZZLE_WWWW
:
304 case BRW_SWIZZLE_XXZZ
:
305 case BRW_SWIZZLE_YYWW
:
306 case BRW_SWIZZLE_XYXY
:
307 case BRW_SWIZZLE_ZWZW
:
308 /* These can be implemented as a single Align1 region on all
309 * platforms, so there's never a hazard between source and
310 * destination. C.f. fs_generator::generate_quad_swizzle().
314 return !is_uniform(src
[0]);
317 /* The SIMD16 compressed instruction
319 * add(16) g4<1>F g4<8,8,1>F g6<8,8,1>F
321 * is actually decoded in hardware as:
323 * add(8) g4<1>F g4<8,8,1>F g6<8,8,1>F
324 * add(8) g5<1>F g5<8,8,1>F g7<8,8,1>F
326 * Which is safe. However, if we have uniform accesses
327 * happening, we get into trouble:
329 * add(8) g4<1>F g4<0,1,0>F g6<8,8,1>F
330 * add(8) g5<1>F g4<0,1,0>F g7<8,8,1>F
332 * Now our destination for the first instruction overwrote the
333 * second instruction's src0, and we get garbage for those 8
334 * pixels. There's a similar issue for the pre-gen6
335 * pixel_x/pixel_y, which are registers of 16-bit values and thus
336 * would get stomped by the first decode as well.
338 if (exec_size
== 16) {
339 for (int i
= 0; i
< sources
; i
++) {
340 if (src
[i
].file
== VGRF
&& (src
[i
].stride
== 0 ||
341 src
[i
].type
== BRW_REGISTER_TYPE_UW
||
342 src
[i
].type
== BRW_REGISTER_TYPE_W
||
343 src
[i
].type
== BRW_REGISTER_TYPE_UB
||
344 src
[i
].type
== BRW_REGISTER_TYPE_B
)) {
354 fs_inst::is_copy_payload(const brw::simple_allocator
&grf_alloc
) const
356 if (this->opcode
!= SHADER_OPCODE_LOAD_PAYLOAD
)
359 fs_reg reg
= this->src
[0];
360 if (reg
.file
!= VGRF
|| reg
.offset
!= 0 || reg
.stride
!= 1)
363 if (grf_alloc
.sizes
[reg
.nr
] * REG_SIZE
!= this->size_written
)
366 for (int i
= 0; i
< this->sources
; i
++) {
367 reg
.type
= this->src
[i
].type
;
368 if (!this->src
[i
].equals(reg
))
371 if (i
< this->header_size
) {
372 reg
.offset
+= REG_SIZE
;
374 reg
= horiz_offset(reg
, this->exec_size
);
382 fs_inst::can_do_source_mods(const struct gen_device_info
*devinfo
) const
384 if (devinfo
->gen
== 6 && is_math())
387 if (is_send_from_grf())
390 if (!backend_instruction::can_do_source_mods())
397 fs_inst::can_do_cmod()
399 if (!backend_instruction::can_do_cmod())
402 /* The accumulator result appears to get used for the conditional modifier
403 * generation. When negating a UD value, there is a 33rd bit generated for
404 * the sign in the accumulator value, so now you can't check, for example,
405 * equality with a 32-bit value. See piglit fs-op-neg-uvec4.
407 for (unsigned i
= 0; i
< sources
; i
++) {
408 if (type_is_unsigned_int(src
[i
].type
) && src
[i
].negate
)
416 fs_inst::can_change_types() const
418 return dst
.type
== src
[0].type
&&
419 !src
[0].abs
&& !src
[0].negate
&& !saturate
&&
420 (opcode
== BRW_OPCODE_MOV
||
421 (opcode
== BRW_OPCODE_SEL
&&
422 dst
.type
== src
[1].type
&&
423 predicate
!= BRW_PREDICATE_NONE
&&
424 !src
[1].abs
&& !src
[1].negate
));
430 memset((void*)this, 0, sizeof(*this));
431 type
= BRW_REGISTER_TYPE_UD
;
435 /** Generic unset register constructor. */
439 this->file
= BAD_FILE
;
442 fs_reg::fs_reg(struct ::brw_reg reg
) :
447 if (this->file
== IMM
&&
448 (this->type
!= BRW_REGISTER_TYPE_V
&&
449 this->type
!= BRW_REGISTER_TYPE_UV
&&
450 this->type
!= BRW_REGISTER_TYPE_VF
)) {
456 fs_reg::equals(const fs_reg
&r
) const
458 return (this->backend_reg::equals(r
) &&
463 fs_reg::negative_equals(const fs_reg
&r
) const
465 return (this->backend_reg::negative_equals(r
) &&
470 fs_reg::is_contiguous() const
476 fs_reg::component_size(unsigned width
) const
478 const unsigned stride
= ((file
!= ARF
&& file
!= FIXED_GRF
) ? this->stride
:
481 return MAX2(width
* stride
, 1) * type_sz(type
);
485 type_size_scalar(const struct glsl_type
*type
)
487 unsigned int size
, i
;
489 switch (type
->base_type
) {
492 case GLSL_TYPE_FLOAT
:
494 return type
->components();
495 case GLSL_TYPE_UINT16
:
496 case GLSL_TYPE_INT16
:
497 case GLSL_TYPE_FLOAT16
:
498 return DIV_ROUND_UP(type
->components(), 2);
499 case GLSL_TYPE_UINT8
:
501 return DIV_ROUND_UP(type
->components(), 4);
502 case GLSL_TYPE_DOUBLE
:
503 case GLSL_TYPE_UINT64
:
504 case GLSL_TYPE_INT64
:
505 return type
->components() * 2;
506 case GLSL_TYPE_ARRAY
:
507 return type_size_scalar(type
->fields
.array
) * type
->length
;
508 case GLSL_TYPE_STRUCT
:
510 for (i
= 0; i
< type
->length
; i
++) {
511 size
+= type_size_scalar(type
->fields
.structure
[i
].type
);
514 case GLSL_TYPE_SAMPLER
:
515 case GLSL_TYPE_ATOMIC_UINT
:
516 case GLSL_TYPE_IMAGE
:
517 /* Samplers, atomics, and images take up no register space, since
518 * they're baked in at link time.
521 case GLSL_TYPE_SUBROUTINE
:
524 case GLSL_TYPE_ERROR
:
525 case GLSL_TYPE_INTERFACE
:
526 case GLSL_TYPE_FUNCTION
:
527 unreachable("not reached");
534 * Create a MOV to read the timestamp register.
536 * The caller is responsible for emitting the MOV. The return value is
537 * the destination of the MOV, with extra parameters set.
540 fs_visitor::get_timestamp(const fs_builder
&bld
)
542 assert(devinfo
->gen
>= 7);
544 fs_reg ts
= fs_reg(retype(brw_vec4_reg(BRW_ARCHITECTURE_REGISTER_FILE
,
547 BRW_REGISTER_TYPE_UD
));
549 fs_reg dst
= fs_reg(VGRF
, alloc
.allocate(1), BRW_REGISTER_TYPE_UD
);
551 /* We want to read the 3 fields we care about even if it's not enabled in
554 bld
.group(4, 0).exec_all().MOV(dst
, ts
);
560 fs_visitor::emit_shader_time_begin()
562 /* We want only the low 32 bits of the timestamp. Since it's running
563 * at the GPU clock rate of ~1.2ghz, it will roll over every ~3 seconds,
564 * which is plenty of time for our purposes. It is identical across the
565 * EUs, but since it's tracking GPU core speed it will increment at a
566 * varying rate as render P-states change.
568 shader_start_time
= component(
569 get_timestamp(bld
.annotate("shader time start")), 0);
573 fs_visitor::emit_shader_time_end()
575 /* Insert our code just before the final SEND with EOT. */
576 exec_node
*end
= this->instructions
.get_tail();
577 assert(end
&& ((fs_inst
*) end
)->eot
);
578 const fs_builder ibld
= bld
.annotate("shader time end")
579 .exec_all().at(NULL
, end
);
580 const fs_reg timestamp
= get_timestamp(ibld
);
582 /* We only use the low 32 bits of the timestamp - see
583 * emit_shader_time_begin()).
585 * We could also check if render P-states have changed (or anything
586 * else that might disrupt timing) by setting smear to 2 and checking if
587 * that field is != 0.
589 const fs_reg shader_end_time
= component(timestamp
, 0);
591 /* Check that there weren't any timestamp reset events (assuming these
592 * were the only two timestamp reads that happened).
594 const fs_reg reset
= component(timestamp
, 2);
595 set_condmod(BRW_CONDITIONAL_Z
,
596 ibld
.AND(ibld
.null_reg_ud(), reset
, brw_imm_ud(1u)));
597 ibld
.IF(BRW_PREDICATE_NORMAL
);
599 fs_reg start
= shader_start_time
;
601 const fs_reg diff
= component(fs_reg(VGRF
, alloc
.allocate(1),
602 BRW_REGISTER_TYPE_UD
),
604 const fs_builder cbld
= ibld
.group(1, 0);
605 cbld
.group(1, 0).ADD(diff
, start
, shader_end_time
);
607 /* If there were no instructions between the two timestamp gets, the diff
608 * is 2 cycles. Remove that overhead, so I can forget about that when
609 * trying to determine the time taken for single instructions.
611 cbld
.ADD(diff
, diff
, brw_imm_ud(-2u));
612 SHADER_TIME_ADD(cbld
, 0, diff
);
613 SHADER_TIME_ADD(cbld
, 1, brw_imm_ud(1u));
614 ibld
.emit(BRW_OPCODE_ELSE
);
615 SHADER_TIME_ADD(cbld
, 2, brw_imm_ud(1u));
616 ibld
.emit(BRW_OPCODE_ENDIF
);
620 fs_visitor::SHADER_TIME_ADD(const fs_builder
&bld
,
621 int shader_time_subindex
,
624 int index
= shader_time_index
* 3 + shader_time_subindex
;
625 struct brw_reg offset
= brw_imm_d(index
* BRW_SHADER_TIME_STRIDE
);
628 if (dispatch_width
== 8)
629 payload
= vgrf(glsl_type::uvec2_type
);
631 payload
= vgrf(glsl_type::uint_type
);
633 bld
.emit(SHADER_OPCODE_SHADER_TIME_ADD
, fs_reg(), payload
, offset
, value
);
637 fs_visitor::vfail(const char *format
, va_list va
)
646 msg
= ralloc_vasprintf(mem_ctx
, format
, va
);
647 msg
= ralloc_asprintf(mem_ctx
, "%s compile failed: %s\n", stage_abbrev
, msg
);
649 this->fail_msg
= msg
;
652 fprintf(stderr
, "%s", msg
);
657 fs_visitor::fail(const char *format
, ...)
661 va_start(va
, format
);
667 * Mark this program as impossible to compile with dispatch width greater
670 * During the SIMD8 compile (which happens first), we can detect and flag
671 * things that are unsupported in SIMD16+ mode, so the compiler can skip the
672 * SIMD16+ compile altogether.
674 * During a compile of dispatch width greater than n (if one happens anyway),
675 * this just calls fail().
678 fs_visitor::limit_dispatch_width(unsigned n
, const char *msg
)
680 if (dispatch_width
> n
) {
683 max_dispatch_width
= n
;
684 compiler
->shader_perf_log(log_data
,
685 "Shader dispatch width limited to SIMD%d: %s",
691 * Returns true if the instruction has a flag that means it won't
692 * update an entire destination register.
694 * For example, dead code elimination and live variable analysis want to know
695 * when a write to a variable screens off any preceding values that were in
699 fs_inst::is_partial_write() const
701 return ((this->predicate
&& this->opcode
!= BRW_OPCODE_SEL
) ||
702 (this->exec_size
* type_sz(this->dst
.type
)) < 32 ||
703 !this->dst
.is_contiguous() ||
704 this->dst
.offset
% REG_SIZE
!= 0);
708 fs_inst::components_read(unsigned i
) const
710 /* Return zero if the source is not present. */
711 if (src
[i
].file
== BAD_FILE
)
715 case FS_OPCODE_LINTERP
:
721 case FS_OPCODE_PIXEL_X
:
722 case FS_OPCODE_PIXEL_Y
:
726 case FS_OPCODE_FB_WRITE_LOGICAL
:
727 assert(src
[FB_WRITE_LOGICAL_SRC_COMPONENTS
].file
== IMM
);
728 /* First/second FB write color. */
730 return src
[FB_WRITE_LOGICAL_SRC_COMPONENTS
].ud
;
734 case SHADER_OPCODE_TEX_LOGICAL
:
735 case SHADER_OPCODE_TXD_LOGICAL
:
736 case SHADER_OPCODE_TXF_LOGICAL
:
737 case SHADER_OPCODE_TXL_LOGICAL
:
738 case SHADER_OPCODE_TXS_LOGICAL
:
739 case SHADER_OPCODE_IMAGE_SIZE_LOGICAL
:
740 case FS_OPCODE_TXB_LOGICAL
:
741 case SHADER_OPCODE_TXF_CMS_LOGICAL
:
742 case SHADER_OPCODE_TXF_CMS_W_LOGICAL
:
743 case SHADER_OPCODE_TXF_UMS_LOGICAL
:
744 case SHADER_OPCODE_TXF_MCS_LOGICAL
:
745 case SHADER_OPCODE_LOD_LOGICAL
:
746 case SHADER_OPCODE_TG4_LOGICAL
:
747 case SHADER_OPCODE_TG4_OFFSET_LOGICAL
:
748 case SHADER_OPCODE_SAMPLEINFO_LOGICAL
:
749 assert(src
[TEX_LOGICAL_SRC_COORD_COMPONENTS
].file
== IMM
&&
750 src
[TEX_LOGICAL_SRC_GRAD_COMPONENTS
].file
== IMM
);
751 /* Texture coordinates. */
752 if (i
== TEX_LOGICAL_SRC_COORDINATE
)
753 return src
[TEX_LOGICAL_SRC_COORD_COMPONENTS
].ud
;
754 /* Texture derivatives. */
755 else if ((i
== TEX_LOGICAL_SRC_LOD
|| i
== TEX_LOGICAL_SRC_LOD2
) &&
756 opcode
== SHADER_OPCODE_TXD_LOGICAL
)
757 return src
[TEX_LOGICAL_SRC_GRAD_COMPONENTS
].ud
;
758 /* Texture offset. */
759 else if (i
== TEX_LOGICAL_SRC_TG4_OFFSET
)
762 else if (i
== TEX_LOGICAL_SRC_MCS
&& opcode
== SHADER_OPCODE_TXF_CMS_W_LOGICAL
)
767 case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL
:
768 case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
:
769 assert(src
[3].file
== IMM
);
770 /* Surface coordinates. */
773 /* Surface operation source (ignored for reads). */
779 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL
:
780 case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
:
781 assert(src
[3].file
== IMM
&&
783 /* Surface coordinates. */
786 /* Surface operation source. */
792 case SHADER_OPCODE_BYTE_SCATTERED_READ_LOGICAL
:
793 /* Scattered logical opcodes use the following params:
794 * src[0] Surface coordinates
795 * src[1] Surface operation source (ignored for reads)
797 * src[3] IMM with always 1 dimension.
798 * src[4] IMM with arg bitsize for scattered read/write 8, 16, 32
800 assert(src
[3].file
== IMM
&&
802 return i
== 1 ? 0 : 1;
804 case SHADER_OPCODE_BYTE_SCATTERED_WRITE_LOGICAL
:
805 assert(src
[3].file
== IMM
&&
809 case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL
:
810 case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
: {
811 assert(src
[3].file
== IMM
&&
813 const unsigned op
= src
[4].ud
;
814 /* Surface coordinates. */
817 /* Surface operation source. */
818 else if (i
== 1 && op
== BRW_AOP_CMPWR
)
820 else if (i
== 1 && (op
== BRW_AOP_INC
|| op
== BRW_AOP_DEC
||
821 op
== BRW_AOP_PREDEC
))
826 case FS_OPCODE_INTERPOLATE_AT_PER_SLOT_OFFSET
:
827 return (i
== 0 ? 2 : 1);
829 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT_LOGICAL
: {
830 assert(src
[3].file
== IMM
&&
832 const unsigned op
= src
[4].ud
;
833 /* Surface coordinates. */
836 /* Surface operation source. */
837 else if (i
== 1 && op
== BRW_AOP_FCMPWR
)
849 fs_inst::size_read(int arg
) const
852 case SHADER_OPCODE_SEND
:
854 return mlen
* REG_SIZE
;
855 } else if (arg
== 3) {
856 return ex_mlen
* REG_SIZE
;
860 case FS_OPCODE_FB_WRITE
:
861 case FS_OPCODE_REP_FB_WRITE
:
864 return src
[0].file
== BAD_FILE
? 0 : 2 * REG_SIZE
;
866 return mlen
* REG_SIZE
;
870 case FS_OPCODE_FB_READ
:
871 case SHADER_OPCODE_URB_WRITE_SIMD8
:
872 case SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT
:
873 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED
:
874 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT
:
875 case SHADER_OPCODE_URB_READ_SIMD8
:
876 case SHADER_OPCODE_URB_READ_SIMD8_PER_SLOT
:
877 case SHADER_OPCODE_UNTYPED_ATOMIC
:
878 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT
:
879 case SHADER_OPCODE_UNTYPED_SURFACE_READ
:
880 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE
:
881 case SHADER_OPCODE_TYPED_ATOMIC
:
882 case SHADER_OPCODE_TYPED_SURFACE_READ
:
883 case SHADER_OPCODE_TYPED_SURFACE_WRITE
:
884 case SHADER_OPCODE_IMAGE_SIZE
:
885 case FS_OPCODE_INTERPOLATE_AT_SAMPLE
:
886 case FS_OPCODE_INTERPOLATE_AT_SHARED_OFFSET
:
887 case SHADER_OPCODE_BYTE_SCATTERED_WRITE
:
888 case SHADER_OPCODE_BYTE_SCATTERED_READ
:
890 return mlen
* REG_SIZE
;
893 case FS_OPCODE_SET_SAMPLE_ID
:
898 case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD_GEN7
:
899 /* The payload is actually stored in src1 */
901 return mlen
* REG_SIZE
;
904 case FS_OPCODE_LINTERP
:
909 case SHADER_OPCODE_LOAD_PAYLOAD
:
910 if (arg
< this->header_size
)
914 case CS_OPCODE_CS_TERMINATE
:
915 case SHADER_OPCODE_BARRIER
:
918 case SHADER_OPCODE_MOV_INDIRECT
:
920 assert(src
[2].file
== IMM
);
926 if (is_tex() && arg
== 0 && src
[0].file
== VGRF
)
927 return mlen
* REG_SIZE
;
931 switch (src
[arg
].file
) {
934 return components_read(arg
) * type_sz(src
[arg
].type
);
940 return components_read(arg
) * src
[arg
].component_size(exec_size
);
942 unreachable("MRF registers are not allowed as sources");
948 /* Return the subset of flag registers that an instruction could
949 * potentially read or write based on the execution controls and flag
950 * subregister number of the instruction.
953 flag_mask(const fs_inst
*inst
)
955 const unsigned start
= inst
->flag_subreg
* 16 + inst
->group
;
956 const unsigned end
= start
+ inst
->exec_size
;
957 return ((1 << DIV_ROUND_UP(end
, 8)) - 1) & ~((1 << (start
/ 8)) - 1);
963 return (n
>= CHAR_BIT
* sizeof(bit_mask(n
)) ? ~0u : (1u << n
) - 1);
967 flag_mask(const fs_reg
&r
, unsigned sz
)
970 const unsigned start
= (r
.nr
- BRW_ARF_FLAG
) * 4 + r
.subnr
;
971 const unsigned end
= start
+ sz
;
972 return bit_mask(end
) & ~bit_mask(start
);
980 fs_inst::flags_read(const gen_device_info
*devinfo
) const
982 if (predicate
== BRW_PREDICATE_ALIGN1_ANYV
||
983 predicate
== BRW_PREDICATE_ALIGN1_ALLV
) {
984 /* The vertical predication modes combine corresponding bits from
985 * f0.0 and f1.0 on Gen7+, and f0.0 and f0.1 on older hardware.
987 const unsigned shift
= devinfo
->gen
>= 7 ? 4 : 2;
988 return flag_mask(this) << shift
| flag_mask(this);
989 } else if (predicate
) {
990 return flag_mask(this);
993 for (int i
= 0; i
< sources
; i
++) {
994 mask
|= flag_mask(src
[i
], size_read(i
));
1001 fs_inst::flags_written() const
1003 if ((conditional_mod
&& (opcode
!= BRW_OPCODE_SEL
&&
1004 opcode
!= BRW_OPCODE_CSEL
&&
1005 opcode
!= BRW_OPCODE_IF
&&
1006 opcode
!= BRW_OPCODE_WHILE
)) ||
1007 opcode
== SHADER_OPCODE_FIND_LIVE_CHANNEL
||
1008 opcode
== FS_OPCODE_FB_WRITE
) {
1009 return flag_mask(this);
1011 return flag_mask(dst
, size_written
);
1016 * Returns how many MRFs an FS opcode will write over.
1018 * Note that this is not the 0 or 1 implied writes in an actual gen
1019 * instruction -- the FS opcodes often generate MOVs in addition.
1022 fs_visitor::implied_mrf_writes(fs_inst
*inst
) const
1024 if (inst
->mlen
== 0)
1027 if (inst
->base_mrf
== -1)
1030 switch (inst
->opcode
) {
1031 case SHADER_OPCODE_RCP
:
1032 case SHADER_OPCODE_RSQ
:
1033 case SHADER_OPCODE_SQRT
:
1034 case SHADER_OPCODE_EXP2
:
1035 case SHADER_OPCODE_LOG2
:
1036 case SHADER_OPCODE_SIN
:
1037 case SHADER_OPCODE_COS
:
1038 return 1 * dispatch_width
/ 8;
1039 case SHADER_OPCODE_POW
:
1040 case SHADER_OPCODE_INT_QUOTIENT
:
1041 case SHADER_OPCODE_INT_REMAINDER
:
1042 return 2 * dispatch_width
/ 8;
1043 case SHADER_OPCODE_TEX
:
1045 case SHADER_OPCODE_TXD
:
1046 case SHADER_OPCODE_TXF
:
1047 case SHADER_OPCODE_TXF_CMS
:
1048 case SHADER_OPCODE_TXF_MCS
:
1049 case SHADER_OPCODE_TG4
:
1050 case SHADER_OPCODE_TG4_OFFSET
:
1051 case SHADER_OPCODE_TXL
:
1052 case SHADER_OPCODE_TXS
:
1053 case SHADER_OPCODE_LOD
:
1054 case SHADER_OPCODE_SAMPLEINFO
:
1056 case FS_OPCODE_FB_WRITE
:
1057 case FS_OPCODE_REP_FB_WRITE
:
1058 return inst
->src
[0].file
== BAD_FILE
? 0 : 2;
1059 case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD
:
1060 case SHADER_OPCODE_GEN4_SCRATCH_READ
:
1062 case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN4
:
1064 case SHADER_OPCODE_GEN4_SCRATCH_WRITE
:
1067 unreachable("not reached");
1072 fs_visitor::vgrf(const glsl_type
*const type
)
1074 int reg_width
= dispatch_width
/ 8;
1075 return fs_reg(VGRF
, alloc
.allocate(type_size_scalar(type
) * reg_width
),
1076 brw_type_for_base_type(type
));
1079 fs_reg::fs_reg(enum brw_reg_file file
, int nr
)
1084 this->type
= BRW_REGISTER_TYPE_F
;
1085 this->stride
= (file
== UNIFORM
? 0 : 1);
1088 fs_reg::fs_reg(enum brw_reg_file file
, int nr
, enum brw_reg_type type
)
1094 this->stride
= (file
== UNIFORM
? 0 : 1);
1097 /* For SIMD16, we need to follow from the uniform setup of SIMD8 dispatch.
1098 * This brings in those uniform definitions
1101 fs_visitor::import_uniforms(fs_visitor
*v
)
1103 this->push_constant_loc
= v
->push_constant_loc
;
1104 this->pull_constant_loc
= v
->pull_constant_loc
;
1105 this->uniforms
= v
->uniforms
;
1106 this->subgroup_id
= v
->subgroup_id
;
1110 fs_visitor::emit_fragcoord_interpolation(fs_reg wpos
)
1112 assert(stage
== MESA_SHADER_FRAGMENT
);
1114 /* gl_FragCoord.x */
1115 bld
.MOV(wpos
, this->pixel_x
);
1116 wpos
= offset(wpos
, bld
, 1);
1118 /* gl_FragCoord.y */
1119 bld
.MOV(wpos
, this->pixel_y
);
1120 wpos
= offset(wpos
, bld
, 1);
1122 /* gl_FragCoord.z */
1123 if (devinfo
->gen
>= 6) {
1124 bld
.MOV(wpos
, fetch_payload_reg(bld
, payload
.source_depth_reg
));
1126 bld
.emit(FS_OPCODE_LINTERP
, wpos
,
1127 this->delta_xy
[BRW_BARYCENTRIC_PERSPECTIVE_PIXEL
],
1128 component(interp_reg(VARYING_SLOT_POS
, 2), 0));
1130 wpos
= offset(wpos
, bld
, 1);
1132 /* gl_FragCoord.w: Already set up in emit_interpolation */
1133 bld
.MOV(wpos
, this->wpos_w
);
1136 enum brw_barycentric_mode
1137 brw_barycentric_mode(enum glsl_interp_mode mode
, nir_intrinsic_op op
)
1139 /* Barycentric modes don't make sense for flat inputs. */
1140 assert(mode
!= INTERP_MODE_FLAT
);
1144 case nir_intrinsic_load_barycentric_pixel
:
1145 case nir_intrinsic_load_barycentric_at_offset
:
1146 bary
= BRW_BARYCENTRIC_PERSPECTIVE_PIXEL
;
1148 case nir_intrinsic_load_barycentric_centroid
:
1149 bary
= BRW_BARYCENTRIC_PERSPECTIVE_CENTROID
;
1151 case nir_intrinsic_load_barycentric_sample
:
1152 case nir_intrinsic_load_barycentric_at_sample
:
1153 bary
= BRW_BARYCENTRIC_PERSPECTIVE_SAMPLE
;
1156 unreachable("invalid intrinsic");
1159 if (mode
== INTERP_MODE_NOPERSPECTIVE
)
1162 return (enum brw_barycentric_mode
) bary
;
1166 * Turn one of the two CENTROID barycentric modes into PIXEL mode.
1168 static enum brw_barycentric_mode
1169 centroid_to_pixel(enum brw_barycentric_mode bary
)
1171 assert(bary
== BRW_BARYCENTRIC_PERSPECTIVE_CENTROID
||
1172 bary
== BRW_BARYCENTRIC_NONPERSPECTIVE_CENTROID
);
1173 return (enum brw_barycentric_mode
) ((unsigned) bary
- 1);
1177 fs_visitor::emit_frontfacing_interpolation()
1179 fs_reg
*reg
= new(this->mem_ctx
) fs_reg(vgrf(glsl_type::bool_type
));
1181 if (devinfo
->gen
>= 6) {
1182 /* Bit 15 of g0.0 is 0 if the polygon is front facing. We want to create
1183 * a boolean result from this (~0/true or 0/false).
1185 * We can use the fact that bit 15 is the MSB of g0.0:W to accomplish
1186 * this task in only one instruction:
1187 * - a negation source modifier will flip the bit; and
1188 * - a W -> D type conversion will sign extend the bit into the high
1189 * word of the destination.
1191 * An ASR 15 fills the low word of the destination.
1193 fs_reg g0
= fs_reg(retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_W
));
1196 bld
.ASR(*reg
, g0
, brw_imm_d(15));
1198 /* Bit 31 of g1.6 is 0 if the polygon is front facing. We want to create
1199 * a boolean result from this (1/true or 0/false).
1201 * Like in the above case, since the bit is the MSB of g1.6:UD we can use
1202 * the negation source modifier to flip it. Unfortunately the SHR
1203 * instruction only operates on UD (or D with an abs source modifier)
1204 * sources without negation.
1206 * Instead, use ASR (which will give ~0/true or 0/false).
1208 fs_reg g1_6
= fs_reg(retype(brw_vec1_grf(1, 6), BRW_REGISTER_TYPE_D
));
1211 bld
.ASR(*reg
, g1_6
, brw_imm_d(31));
1218 fs_visitor::compute_sample_position(fs_reg dst
, fs_reg int_sample_pos
)
1220 assert(stage
== MESA_SHADER_FRAGMENT
);
1221 struct brw_wm_prog_data
*wm_prog_data
= brw_wm_prog_data(this->prog_data
);
1222 assert(dst
.type
== BRW_REGISTER_TYPE_F
);
1224 if (wm_prog_data
->persample_dispatch
) {
1225 /* Convert int_sample_pos to floating point */
1226 bld
.MOV(dst
, int_sample_pos
);
1227 /* Scale to the range [0, 1] */
1228 bld
.MUL(dst
, dst
, brw_imm_f(1 / 16.0f
));
1231 /* From ARB_sample_shading specification:
1232 * "When rendering to a non-multisample buffer, or if multisample
1233 * rasterization is disabled, gl_SamplePosition will always be
1236 bld
.MOV(dst
, brw_imm_f(0.5f
));
1241 fs_visitor::emit_samplepos_setup()
1243 assert(devinfo
->gen
>= 6);
1245 const fs_builder abld
= bld
.annotate("compute sample position");
1246 fs_reg
*reg
= new(this->mem_ctx
) fs_reg(vgrf(glsl_type::vec2_type
));
1248 fs_reg int_sample_x
= vgrf(glsl_type::int_type
);
1249 fs_reg int_sample_y
= vgrf(glsl_type::int_type
);
1251 /* WM will be run in MSDISPMODE_PERSAMPLE. So, only one of SIMD8 or SIMD16
1252 * mode will be enabled.
1254 * From the Ivy Bridge PRM, volume 2 part 1, page 344:
1255 * R31.1:0 Position Offset X/Y for Slot[3:0]
1256 * R31.3:2 Position Offset X/Y for Slot[7:4]
1259 * The X, Y sample positions come in as bytes in thread payload. So, read
1260 * the positions using vstride=16, width=8, hstride=2.
1262 const fs_reg sample_pos_reg
=
1263 fetch_payload_reg(abld
, payload
.sample_pos_reg
, BRW_REGISTER_TYPE_W
);
1265 /* Compute gl_SamplePosition.x */
1266 abld
.MOV(int_sample_x
, subscript(sample_pos_reg
, BRW_REGISTER_TYPE_B
, 0));
1267 compute_sample_position(offset(pos
, abld
, 0), int_sample_x
);
1269 /* Compute gl_SamplePosition.y */
1270 abld
.MOV(int_sample_y
, subscript(sample_pos_reg
, BRW_REGISTER_TYPE_B
, 1));
1271 compute_sample_position(offset(pos
, abld
, 1), int_sample_y
);
1276 fs_visitor::emit_sampleid_setup()
1278 assert(stage
== MESA_SHADER_FRAGMENT
);
1279 brw_wm_prog_key
*key
= (brw_wm_prog_key
*) this->key
;
1280 assert(devinfo
->gen
>= 6);
1282 const fs_builder abld
= bld
.annotate("compute sample id");
1283 fs_reg
*reg
= new(this->mem_ctx
) fs_reg(vgrf(glsl_type::uint_type
));
1285 if (!key
->multisample_fbo
) {
1286 /* As per GL_ARB_sample_shading specification:
1287 * "When rendering to a non-multisample buffer, or if multisample
1288 * rasterization is disabled, gl_SampleID will always be zero."
1290 abld
.MOV(*reg
, brw_imm_d(0));
1291 } else if (devinfo
->gen
>= 8) {
1292 /* Sample ID comes in as 4-bit numbers in g1.0:
1294 * 15:12 Slot 3 SampleID (only used in SIMD16)
1295 * 11:8 Slot 2 SampleID (only used in SIMD16)
1296 * 7:4 Slot 1 SampleID
1297 * 3:0 Slot 0 SampleID
1299 * Each slot corresponds to four channels, so we want to replicate each
1300 * half-byte value to 4 channels in a row:
1302 * dst+0: .7 .6 .5 .4 .3 .2 .1 .0
1303 * 7:4 7:4 7:4 7:4 3:0 3:0 3:0 3:0
1305 * dst+1: .7 .6 .5 .4 .3 .2 .1 .0 (if SIMD16)
1306 * 15:12 15:12 15:12 15:12 11:8 11:8 11:8 11:8
1308 * First, we read g1.0 with a <1,8,0>UB region, causing the first 8
1309 * channels to read the first byte (7:0), and the second group of 8
1310 * channels to read the second byte (15:8). Then, we shift right by
1311 * a vector immediate of <4, 4, 4, 4, 0, 0, 0, 0>, moving the slot 1 / 3
1312 * values into place. Finally, we AND with 0xf to keep the low nibble.
1314 * shr(16) tmp<1>W g1.0<1,8,0>B 0x44440000:V
1315 * and(16) dst<1>D tmp<8,8,1>W 0xf:W
1317 * TODO: These payload bits exist on Gen7 too, but they appear to always
1318 * be zero, so this code fails to work. We should find out why.
1320 const fs_reg tmp
= abld
.vgrf(BRW_REGISTER_TYPE_UW
);
1322 for (unsigned i
= 0; i
< DIV_ROUND_UP(dispatch_width
, 16); i
++) {
1323 const fs_builder hbld
= abld
.group(MIN2(16, dispatch_width
), i
);
1324 hbld
.SHR(offset(tmp
, hbld
, i
),
1325 stride(retype(brw_vec1_grf(1 + i
, 0), BRW_REGISTER_TYPE_UB
),
1327 brw_imm_v(0x44440000));
1330 abld
.AND(*reg
, tmp
, brw_imm_w(0xf));
1332 const fs_reg t1
= component(abld
.vgrf(BRW_REGISTER_TYPE_UD
), 0);
1333 const fs_reg t2
= abld
.vgrf(BRW_REGISTER_TYPE_UW
);
1335 /* The PS will be run in MSDISPMODE_PERSAMPLE. For example with
1336 * 8x multisampling, subspan 0 will represent sample N (where N
1337 * is 0, 2, 4 or 6), subspan 1 will represent sample 1, 3, 5 or
1338 * 7. We can find the value of N by looking at R0.0 bits 7:6
1339 * ("Starting Sample Pair Index (SSPI)") and multiplying by two
1340 * (since samples are always delivered in pairs). That is, we
1341 * compute 2*((R0.0 & 0xc0) >> 6) == (R0.0 & 0xc0) >> 5. Then
1342 * we need to add N to the sequence (0, 0, 0, 0, 1, 1, 1, 1) in
1343 * case of SIMD8 and sequence (0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2,
1344 * 2, 3, 3, 3, 3) in case of SIMD16. We compute this sequence by
1345 * populating a temporary variable with the sequence (0, 1, 2, 3),
1346 * and then reading from it using vstride=1, width=4, hstride=0.
1347 * These computations hold good for 4x multisampling as well.
1349 * For 2x MSAA and SIMD16, we want to use the sequence (0, 1, 0, 1):
1350 * the first four slots are sample 0 of subspan 0; the next four
1351 * are sample 1 of subspan 0; the third group is sample 0 of
1352 * subspan 1, and finally sample 1 of subspan 1.
1355 /* SKL+ has an extra bit for the Starting Sample Pair Index to
1356 * accomodate 16x MSAA.
1358 abld
.exec_all().group(1, 0)
1359 .AND(t1
, fs_reg(retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UD
)),
1361 abld
.exec_all().group(1, 0).SHR(t1
, t1
, brw_imm_d(5));
1363 /* This works for SIMD8-SIMD16. It also works for SIMD32 but only if we
1364 * can assume 4x MSAA. Disallow it on IVB+
1366 * FINISHME: One day, we could come up with a way to do this that
1367 * actually works on gen7.
1369 if (devinfo
->gen
>= 7)
1370 limit_dispatch_width(16, "gl_SampleId is unsupported in SIMD32 on gen7");
1371 abld
.exec_all().group(8, 0).MOV(t2
, brw_imm_v(0x32103210));
1373 /* This special instruction takes care of setting vstride=1,
1374 * width=4, hstride=0 of t2 during an ADD instruction.
1376 abld
.emit(FS_OPCODE_SET_SAMPLE_ID
, *reg
, t1
, t2
);
1383 fs_visitor::emit_samplemaskin_setup()
1385 assert(stage
== MESA_SHADER_FRAGMENT
);
1386 struct brw_wm_prog_data
*wm_prog_data
= brw_wm_prog_data(this->prog_data
);
1387 assert(devinfo
->gen
>= 6);
1389 fs_reg
*reg
= new(this->mem_ctx
) fs_reg(vgrf(glsl_type::int_type
));
1391 fs_reg coverage_mask
=
1392 fetch_payload_reg(bld
, payload
.sample_mask_in_reg
, BRW_REGISTER_TYPE_D
);
1394 if (wm_prog_data
->persample_dispatch
) {
1395 /* gl_SampleMaskIn[] comes from two sources: the input coverage mask,
1396 * and a mask representing which sample is being processed by the
1397 * current shader invocation.
1399 * From the OES_sample_variables specification:
1400 * "When per-sample shading is active due to the use of a fragment input
1401 * qualified by "sample" or due to the use of the gl_SampleID or
1402 * gl_SamplePosition variables, only the bit for the current sample is
1403 * set in gl_SampleMaskIn."
1405 const fs_builder abld
= bld
.annotate("compute gl_SampleMaskIn");
1407 if (nir_system_values
[SYSTEM_VALUE_SAMPLE_ID
].file
== BAD_FILE
)
1408 nir_system_values
[SYSTEM_VALUE_SAMPLE_ID
] = *emit_sampleid_setup();
1410 fs_reg one
= vgrf(glsl_type::int_type
);
1411 fs_reg enabled_mask
= vgrf(glsl_type::int_type
);
1412 abld
.MOV(one
, brw_imm_d(1));
1413 abld
.SHL(enabled_mask
, one
, nir_system_values
[SYSTEM_VALUE_SAMPLE_ID
]);
1414 abld
.AND(*reg
, enabled_mask
, coverage_mask
);
1416 /* In per-pixel mode, the coverage mask is sufficient. */
1417 *reg
= coverage_mask
;
1423 fs_visitor::resolve_source_modifiers(const fs_reg
&src
)
1425 if (!src
.abs
&& !src
.negate
)
1428 fs_reg temp
= bld
.vgrf(src
.type
);
1435 fs_visitor::emit_discard_jump()
1437 assert(brw_wm_prog_data(this->prog_data
)->uses_kill
);
1439 /* For performance, after a discard, jump to the end of the
1440 * shader if all relevant channels have been discarded.
1442 fs_inst
*discard_jump
= bld
.emit(FS_OPCODE_DISCARD_JUMP
);
1443 discard_jump
->flag_subreg
= 1;
1445 discard_jump
->predicate
= BRW_PREDICATE_ALIGN1_ANY4H
;
1446 discard_jump
->predicate_inverse
= true;
1450 fs_visitor::emit_gs_thread_end()
1452 assert(stage
== MESA_SHADER_GEOMETRY
);
1454 struct brw_gs_prog_data
*gs_prog_data
= brw_gs_prog_data(prog_data
);
1456 if (gs_compile
->control_data_header_size_bits
> 0) {
1457 emit_gs_control_data_bits(this->final_gs_vertex_count
);
1460 const fs_builder abld
= bld
.annotate("thread end");
1463 if (gs_prog_data
->static_vertex_count
!= -1) {
1464 foreach_in_list_reverse(fs_inst
, prev
, &this->instructions
) {
1465 if (prev
->opcode
== SHADER_OPCODE_URB_WRITE_SIMD8
||
1466 prev
->opcode
== SHADER_OPCODE_URB_WRITE_SIMD8_MASKED
||
1467 prev
->opcode
== SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT
||
1468 prev
->opcode
== SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT
) {
1471 /* Delete now dead instructions. */
1472 foreach_in_list_reverse_safe(exec_node
, dead
, &this->instructions
) {
1478 } else if (prev
->is_control_flow() || prev
->has_side_effects()) {
1482 fs_reg hdr
= abld
.vgrf(BRW_REGISTER_TYPE_UD
, 1);
1483 abld
.MOV(hdr
, fs_reg(retype(brw_vec8_grf(1, 0), BRW_REGISTER_TYPE_UD
)));
1484 inst
= abld
.emit(SHADER_OPCODE_URB_WRITE_SIMD8
, reg_undef
, hdr
);
1487 fs_reg payload
= abld
.vgrf(BRW_REGISTER_TYPE_UD
, 2);
1488 fs_reg
*sources
= ralloc_array(mem_ctx
, fs_reg
, 2);
1489 sources
[0] = fs_reg(retype(brw_vec8_grf(1, 0), BRW_REGISTER_TYPE_UD
));
1490 sources
[1] = this->final_gs_vertex_count
;
1491 abld
.LOAD_PAYLOAD(payload
, sources
, 2, 2);
1492 inst
= abld
.emit(SHADER_OPCODE_URB_WRITE_SIMD8
, reg_undef
, payload
);
1500 fs_visitor::assign_curb_setup()
1502 unsigned uniform_push_length
= DIV_ROUND_UP(stage_prog_data
->nr_params
, 8);
1504 unsigned ubo_push_length
= 0;
1505 unsigned ubo_push_start
[4];
1506 for (int i
= 0; i
< 4; i
++) {
1507 ubo_push_start
[i
] = 8 * (ubo_push_length
+ uniform_push_length
);
1508 ubo_push_length
+= stage_prog_data
->ubo_ranges
[i
].length
;
1511 prog_data
->curb_read_length
= uniform_push_length
+ ubo_push_length
;
1513 /* Map the offsets in the UNIFORM file to fixed HW regs. */
1514 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1515 for (unsigned int i
= 0; i
< inst
->sources
; i
++) {
1516 if (inst
->src
[i
].file
== UNIFORM
) {
1517 int uniform_nr
= inst
->src
[i
].nr
+ inst
->src
[i
].offset
/ 4;
1519 if (inst
->src
[i
].nr
>= UBO_START
) {
1520 /* constant_nr is in 32-bit units, the rest are in bytes */
1521 constant_nr
= ubo_push_start
[inst
->src
[i
].nr
- UBO_START
] +
1522 inst
->src
[i
].offset
/ 4;
1523 } else if (uniform_nr
>= 0 && uniform_nr
< (int) uniforms
) {
1524 constant_nr
= push_constant_loc
[uniform_nr
];
1526 /* Section 5.11 of the OpenGL 4.1 spec says:
1527 * "Out-of-bounds reads return undefined values, which include
1528 * values from other variables of the active program or zero."
1529 * Just return the first push constant.
1534 struct brw_reg brw_reg
= brw_vec1_grf(payload
.num_regs
+
1537 brw_reg
.abs
= inst
->src
[i
].abs
;
1538 brw_reg
.negate
= inst
->src
[i
].negate
;
1540 assert(inst
->src
[i
].stride
== 0);
1541 inst
->src
[i
] = byte_offset(
1542 retype(brw_reg
, inst
->src
[i
].type
),
1543 inst
->src
[i
].offset
% 4);
1548 /* This may be updated in assign_urb_setup or assign_vs_urb_setup. */
1549 this->first_non_payload_grf
= payload
.num_regs
+ prog_data
->curb_read_length
;
1553 fs_visitor::calculate_urb_setup()
1555 assert(stage
== MESA_SHADER_FRAGMENT
);
1556 struct brw_wm_prog_data
*prog_data
= brw_wm_prog_data(this->prog_data
);
1557 brw_wm_prog_key
*key
= (brw_wm_prog_key
*) this->key
;
1559 memset(prog_data
->urb_setup
, -1,
1560 sizeof(prog_data
->urb_setup
[0]) * VARYING_SLOT_MAX
);
1563 /* Figure out where each of the incoming setup attributes lands. */
1564 if (devinfo
->gen
>= 6) {
1565 if (util_bitcount64(nir
->info
.inputs_read
&
1566 BRW_FS_VARYING_INPUT_MASK
) <= 16) {
1567 /* The SF/SBE pipeline stage can do arbitrary rearrangement of the
1568 * first 16 varying inputs, so we can put them wherever we want.
1569 * Just put them in order.
1571 * This is useful because it means that (a) inputs not used by the
1572 * fragment shader won't take up valuable register space, and (b) we
1573 * won't have to recompile the fragment shader if it gets paired with
1574 * a different vertex (or geometry) shader.
1576 for (unsigned int i
= 0; i
< VARYING_SLOT_MAX
; i
++) {
1577 if (nir
->info
.inputs_read
& BRW_FS_VARYING_INPUT_MASK
&
1578 BITFIELD64_BIT(i
)) {
1579 prog_data
->urb_setup
[i
] = urb_next
++;
1583 /* We have enough input varyings that the SF/SBE pipeline stage can't
1584 * arbitrarily rearrange them to suit our whim; we have to put them
1585 * in an order that matches the output of the previous pipeline stage
1586 * (geometry or vertex shader).
1588 struct brw_vue_map prev_stage_vue_map
;
1589 brw_compute_vue_map(devinfo
, &prev_stage_vue_map
,
1590 key
->input_slots_valid
,
1591 nir
->info
.separate_shader
);
1594 brw_compute_first_urb_slot_required(nir
->info
.inputs_read
,
1595 &prev_stage_vue_map
);
1597 assert(prev_stage_vue_map
.num_slots
<= first_slot
+ 32);
1598 for (int slot
= first_slot
; slot
< prev_stage_vue_map
.num_slots
;
1600 int varying
= prev_stage_vue_map
.slot_to_varying
[slot
];
1601 if (varying
!= BRW_VARYING_SLOT_PAD
&&
1602 (nir
->info
.inputs_read
& BRW_FS_VARYING_INPUT_MASK
&
1603 BITFIELD64_BIT(varying
))) {
1604 prog_data
->urb_setup
[varying
] = slot
- first_slot
;
1607 urb_next
= prev_stage_vue_map
.num_slots
- first_slot
;
1610 /* FINISHME: The sf doesn't map VS->FS inputs for us very well. */
1611 for (unsigned int i
= 0; i
< VARYING_SLOT_MAX
; i
++) {
1612 /* Point size is packed into the header, not as a general attribute */
1613 if (i
== VARYING_SLOT_PSIZ
)
1616 if (key
->input_slots_valid
& BITFIELD64_BIT(i
)) {
1617 /* The back color slot is skipped when the front color is
1618 * also written to. In addition, some slots can be
1619 * written in the vertex shader and not read in the
1620 * fragment shader. So the register number must always be
1621 * incremented, mapped or not.
1623 if (_mesa_varying_slot_in_fs((gl_varying_slot
) i
))
1624 prog_data
->urb_setup
[i
] = urb_next
;
1630 * It's a FS only attribute, and we did interpolation for this attribute
1631 * in SF thread. So, count it here, too.
1633 * See compile_sf_prog() for more info.
1635 if (nir
->info
.inputs_read
& BITFIELD64_BIT(VARYING_SLOT_PNTC
))
1636 prog_data
->urb_setup
[VARYING_SLOT_PNTC
] = urb_next
++;
1639 prog_data
->num_varying_inputs
= urb_next
;
1643 fs_visitor::assign_urb_setup()
1645 assert(stage
== MESA_SHADER_FRAGMENT
);
1646 struct brw_wm_prog_data
*prog_data
= brw_wm_prog_data(this->prog_data
);
1648 int urb_start
= payload
.num_regs
+ prog_data
->base
.curb_read_length
;
1650 /* Offset all the urb_setup[] index by the actual position of the
1651 * setup regs, now that the location of the constants has been chosen.
1653 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1654 for (int i
= 0; i
< inst
->sources
; i
++) {
1655 if (inst
->src
[i
].file
== ATTR
) {
1656 /* ATTR regs in the FS are in units of logical scalar inputs each
1657 * of which consumes half of a GRF register.
1659 assert(inst
->src
[i
].offset
< REG_SIZE
/ 2);
1660 const unsigned grf
= urb_start
+ inst
->src
[i
].nr
/ 2;
1661 const unsigned offset
= (inst
->src
[i
].nr
% 2) * (REG_SIZE
/ 2) +
1662 inst
->src
[i
].offset
;
1663 const unsigned width
= inst
->src
[i
].stride
== 0 ?
1664 1 : MIN2(inst
->exec_size
, 8);
1665 struct brw_reg reg
= stride(
1666 byte_offset(retype(brw_vec8_grf(grf
, 0), inst
->src
[i
].type
),
1668 width
* inst
->src
[i
].stride
,
1669 width
, inst
->src
[i
].stride
);
1670 reg
.abs
= inst
->src
[i
].abs
;
1671 reg
.negate
= inst
->src
[i
].negate
;
1677 /* Each attribute is 4 setup channels, each of which is half a reg. */
1678 this->first_non_payload_grf
+= prog_data
->num_varying_inputs
* 2;
1682 fs_visitor::convert_attr_sources_to_hw_regs(fs_inst
*inst
)
1684 for (int i
= 0; i
< inst
->sources
; i
++) {
1685 if (inst
->src
[i
].file
== ATTR
) {
1686 int grf
= payload
.num_regs
+
1687 prog_data
->curb_read_length
+
1689 inst
->src
[i
].offset
/ REG_SIZE
;
1691 /* As explained at brw_reg_from_fs_reg, From the Haswell PRM:
1693 * VertStride must be used to cross GRF register boundaries. This
1694 * rule implies that elements within a 'Width' cannot cross GRF
1697 * So, for registers that are large enough, we have to split the exec
1698 * size in two and trust the compression state to sort it out.
1700 unsigned total_size
= inst
->exec_size
*
1701 inst
->src
[i
].stride
*
1702 type_sz(inst
->src
[i
].type
);
1704 assert(total_size
<= 2 * REG_SIZE
);
1705 const unsigned exec_size
=
1706 (total_size
<= REG_SIZE
) ? inst
->exec_size
: inst
->exec_size
/ 2;
1708 unsigned width
= inst
->src
[i
].stride
== 0 ? 1 : exec_size
;
1709 struct brw_reg reg
=
1710 stride(byte_offset(retype(brw_vec8_grf(grf
, 0), inst
->src
[i
].type
),
1711 inst
->src
[i
].offset
% REG_SIZE
),
1712 exec_size
* inst
->src
[i
].stride
,
1713 width
, inst
->src
[i
].stride
);
1714 reg
.abs
= inst
->src
[i
].abs
;
1715 reg
.negate
= inst
->src
[i
].negate
;
1723 fs_visitor::assign_vs_urb_setup()
1725 struct brw_vs_prog_data
*vs_prog_data
= brw_vs_prog_data(prog_data
);
1727 assert(stage
== MESA_SHADER_VERTEX
);
1729 /* Each attribute is 4 regs. */
1730 this->first_non_payload_grf
+= 4 * vs_prog_data
->nr_attribute_slots
;
1732 assert(vs_prog_data
->base
.urb_read_length
<= 15);
1734 /* Rewrite all ATTR file references to the hw grf that they land in. */
1735 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1736 convert_attr_sources_to_hw_regs(inst
);
1741 fs_visitor::assign_tcs_single_patch_urb_setup()
1743 assert(stage
== MESA_SHADER_TESS_CTRL
);
1745 /* Rewrite all ATTR file references to HW_REGs. */
1746 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1747 convert_attr_sources_to_hw_regs(inst
);
1752 fs_visitor::assign_tes_urb_setup()
1754 assert(stage
== MESA_SHADER_TESS_EVAL
);
1756 struct brw_vue_prog_data
*vue_prog_data
= brw_vue_prog_data(prog_data
);
1758 first_non_payload_grf
+= 8 * vue_prog_data
->urb_read_length
;
1760 /* Rewrite all ATTR file references to HW_REGs. */
1761 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1762 convert_attr_sources_to_hw_regs(inst
);
1767 fs_visitor::assign_gs_urb_setup()
1769 assert(stage
== MESA_SHADER_GEOMETRY
);
1771 struct brw_vue_prog_data
*vue_prog_data
= brw_vue_prog_data(prog_data
);
1773 first_non_payload_grf
+=
1774 8 * vue_prog_data
->urb_read_length
* nir
->info
.gs
.vertices_in
;
1776 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1777 /* Rewrite all ATTR file references to GRFs. */
1778 convert_attr_sources_to_hw_regs(inst
);
1784 * Split large virtual GRFs into separate components if we can.
1786 * This is mostly duplicated with what brw_fs_vector_splitting does,
1787 * but that's really conservative because it's afraid of doing
1788 * splitting that doesn't result in real progress after the rest of
1789 * the optimization phases, which would cause infinite looping in
1790 * optimization. We can do it once here, safely. This also has the
1791 * opportunity to split interpolated values, or maybe even uniforms,
1792 * which we don't have at the IR level.
1794 * We want to split, because virtual GRFs are what we register
1795 * allocate and spill (due to contiguousness requirements for some
1796 * instructions), and they're what we naturally generate in the
1797 * codegen process, but most virtual GRFs don't actually need to be
1798 * contiguous sets of GRFs. If we split, we'll end up with reduced
1799 * live intervals and better dead code elimination and coalescing.
1802 fs_visitor::split_virtual_grfs()
1804 /* Compact the register file so we eliminate dead vgrfs. This
1805 * only defines split points for live registers, so if we have
1806 * too large dead registers they will hit assertions later.
1808 compact_virtual_grfs();
1810 int num_vars
= this->alloc
.count
;
1812 /* Count the total number of registers */
1814 int vgrf_to_reg
[num_vars
];
1815 for (int i
= 0; i
< num_vars
; i
++) {
1816 vgrf_to_reg
[i
] = reg_count
;
1817 reg_count
+= alloc
.sizes
[i
];
1820 /* An array of "split points". For each register slot, this indicates
1821 * if this slot can be separated from the previous slot. Every time an
1822 * instruction uses multiple elements of a register (as a source or
1823 * destination), we mark the used slots as inseparable. Then we go
1824 * through and split the registers into the smallest pieces we can.
1826 bool split_points
[reg_count
];
1827 memset(split_points
, 0, sizeof(split_points
));
1829 /* Mark all used registers as fully splittable */
1830 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1831 if (inst
->dst
.file
== VGRF
) {
1832 int reg
= vgrf_to_reg
[inst
->dst
.nr
];
1833 for (unsigned j
= 1; j
< this->alloc
.sizes
[inst
->dst
.nr
]; j
++)
1834 split_points
[reg
+ j
] = true;
1837 for (int i
= 0; i
< inst
->sources
; i
++) {
1838 if (inst
->src
[i
].file
== VGRF
) {
1839 int reg
= vgrf_to_reg
[inst
->src
[i
].nr
];
1840 for (unsigned j
= 1; j
< this->alloc
.sizes
[inst
->src
[i
].nr
]; j
++)
1841 split_points
[reg
+ j
] = true;
1846 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1847 if (inst
->dst
.file
== VGRF
) {
1848 int reg
= vgrf_to_reg
[inst
->dst
.nr
] + inst
->dst
.offset
/ REG_SIZE
;
1849 for (unsigned j
= 1; j
< regs_written(inst
); j
++)
1850 split_points
[reg
+ j
] = false;
1852 for (int i
= 0; i
< inst
->sources
; i
++) {
1853 if (inst
->src
[i
].file
== VGRF
) {
1854 int reg
= vgrf_to_reg
[inst
->src
[i
].nr
] + inst
->src
[i
].offset
/ REG_SIZE
;
1855 for (unsigned j
= 1; j
< regs_read(inst
, i
); j
++)
1856 split_points
[reg
+ j
] = false;
1861 int new_virtual_grf
[reg_count
];
1862 int new_reg_offset
[reg_count
];
1865 for (int i
= 0; i
< num_vars
; i
++) {
1866 /* The first one should always be 0 as a quick sanity check. */
1867 assert(split_points
[reg
] == false);
1870 new_reg_offset
[reg
] = 0;
1875 for (unsigned j
= 1; j
< alloc
.sizes
[i
]; j
++) {
1876 /* If this is a split point, reset the offset to 0 and allocate a
1877 * new virtual GRF for the previous offset many registers
1879 if (split_points
[reg
]) {
1880 assert(offset
<= MAX_VGRF_SIZE
);
1881 int grf
= alloc
.allocate(offset
);
1882 for (int k
= reg
- offset
; k
< reg
; k
++)
1883 new_virtual_grf
[k
] = grf
;
1886 new_reg_offset
[reg
] = offset
;
1891 /* The last one gets the original register number */
1892 assert(offset
<= MAX_VGRF_SIZE
);
1893 alloc
.sizes
[i
] = offset
;
1894 for (int k
= reg
- offset
; k
< reg
; k
++)
1895 new_virtual_grf
[k
] = i
;
1897 assert(reg
== reg_count
);
1899 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1900 if (inst
->dst
.file
== VGRF
) {
1901 reg
= vgrf_to_reg
[inst
->dst
.nr
] + inst
->dst
.offset
/ REG_SIZE
;
1902 inst
->dst
.nr
= new_virtual_grf
[reg
];
1903 inst
->dst
.offset
= new_reg_offset
[reg
] * REG_SIZE
+
1904 inst
->dst
.offset
% REG_SIZE
;
1905 assert((unsigned)new_reg_offset
[reg
] < alloc
.sizes
[new_virtual_grf
[reg
]]);
1907 for (int i
= 0; i
< inst
->sources
; i
++) {
1908 if (inst
->src
[i
].file
== VGRF
) {
1909 reg
= vgrf_to_reg
[inst
->src
[i
].nr
] + inst
->src
[i
].offset
/ REG_SIZE
;
1910 inst
->src
[i
].nr
= new_virtual_grf
[reg
];
1911 inst
->src
[i
].offset
= new_reg_offset
[reg
] * REG_SIZE
+
1912 inst
->src
[i
].offset
% REG_SIZE
;
1913 assert((unsigned)new_reg_offset
[reg
] < alloc
.sizes
[new_virtual_grf
[reg
]]);
1917 invalidate_live_intervals();
1921 * Remove unused virtual GRFs and compact the virtual_grf_* arrays.
1923 * During code generation, we create tons of temporary variables, many of
1924 * which get immediately killed and are never used again. Yet, in later
1925 * optimization and analysis passes, such as compute_live_intervals, we need
1926 * to loop over all the virtual GRFs. Compacting them can save a lot of
1930 fs_visitor::compact_virtual_grfs()
1932 bool progress
= false;
1933 int remap_table
[this->alloc
.count
];
1934 memset(remap_table
, -1, sizeof(remap_table
));
1936 /* Mark which virtual GRFs are used. */
1937 foreach_block_and_inst(block
, const fs_inst
, inst
, cfg
) {
1938 if (inst
->dst
.file
== VGRF
)
1939 remap_table
[inst
->dst
.nr
] = 0;
1941 for (int i
= 0; i
< inst
->sources
; i
++) {
1942 if (inst
->src
[i
].file
== VGRF
)
1943 remap_table
[inst
->src
[i
].nr
] = 0;
1947 /* Compact the GRF arrays. */
1949 for (unsigned i
= 0; i
< this->alloc
.count
; i
++) {
1950 if (remap_table
[i
] == -1) {
1951 /* We just found an unused register. This means that we are
1952 * actually going to compact something.
1956 remap_table
[i
] = new_index
;
1957 alloc
.sizes
[new_index
] = alloc
.sizes
[i
];
1958 invalidate_live_intervals();
1963 this->alloc
.count
= new_index
;
1965 /* Patch all the instructions to use the newly renumbered registers */
1966 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
1967 if (inst
->dst
.file
== VGRF
)
1968 inst
->dst
.nr
= remap_table
[inst
->dst
.nr
];
1970 for (int i
= 0; i
< inst
->sources
; i
++) {
1971 if (inst
->src
[i
].file
== VGRF
)
1972 inst
->src
[i
].nr
= remap_table
[inst
->src
[i
].nr
];
1976 /* Patch all the references to delta_xy, since they're used in register
1977 * allocation. If they're unused, switch them to BAD_FILE so we don't
1978 * think some random VGRF is delta_xy.
1980 for (unsigned i
= 0; i
< ARRAY_SIZE(delta_xy
); i
++) {
1981 if (delta_xy
[i
].file
== VGRF
) {
1982 if (remap_table
[delta_xy
[i
].nr
] != -1) {
1983 delta_xy
[i
].nr
= remap_table
[delta_xy
[i
].nr
];
1985 delta_xy
[i
].file
= BAD_FILE
;
1994 get_subgroup_id_param_index(const brw_stage_prog_data
*prog_data
)
1996 if (prog_data
->nr_params
== 0)
1999 /* The local thread id is always the last parameter in the list */
2000 uint32_t last_param
= prog_data
->param
[prog_data
->nr_params
- 1];
2001 if (last_param
== BRW_PARAM_BUILTIN_SUBGROUP_ID
)
2002 return prog_data
->nr_params
- 1;
2008 * Struct for handling complex alignments.
2010 * A complex alignment is stored as multiplier and an offset. A value is
2011 * considered to be aligned if it is {offset} larger than a multiple of {mul}.
2012 * For instance, with an alignment of {8, 2}, cplx_align_apply would do the
2015 * N | cplx_align_apply({8, 2}, N)
2016 * ----+-----------------------------
2030 #define CPLX_ALIGN_MAX_MUL 8
2033 cplx_align_assert_sane(struct cplx_align a
)
2035 assert(a
.mul
> 0 && util_is_power_of_two_nonzero(a
.mul
));
2036 assert(a
.offset
< a
.mul
);
2040 * Combines two alignments to produce a least multiple of sorts.
2042 * The returned alignment is the smallest (in terms of multiplier) such that
2043 * anything aligned to both a and b will be aligned to the new alignment.
2044 * This function will assert-fail if a and b are not compatible, i.e. if the
2045 * offset parameters are such that no common alignment is possible.
2047 static struct cplx_align
2048 cplx_align_combine(struct cplx_align a
, struct cplx_align b
)
2050 cplx_align_assert_sane(a
);
2051 cplx_align_assert_sane(b
);
2053 /* Assert that the alignments agree. */
2054 assert((a
.offset
& (b
.mul
- 1)) == (b
.offset
& (a
.mul
- 1)));
2056 return a
.mul
> b
.mul
? a
: b
;
2060 * Apply a complex alignment
2062 * This function will return the smallest number greater than or equal to
2063 * offset that is aligned to align.
2066 cplx_align_apply(struct cplx_align align
, unsigned offset
)
2068 return ALIGN(offset
- align
.offset
, align
.mul
) + align
.offset
;
2071 #define UNIFORM_SLOT_SIZE 4
2073 struct uniform_slot_info
{
2074 /** True if the given uniform slot is live */
2077 /** True if this slot and the next slot must remain contiguous */
2078 unsigned contiguous
:1;
2080 struct cplx_align align
;
2084 mark_uniform_slots_read(struct uniform_slot_info
*slots
,
2085 unsigned num_slots
, unsigned alignment
)
2087 assert(alignment
> 0 && util_is_power_of_two_nonzero(alignment
));
2088 assert(alignment
<= CPLX_ALIGN_MAX_MUL
);
2090 /* We can't align a slot to anything less than the slot size */
2091 alignment
= MAX2(alignment
, UNIFORM_SLOT_SIZE
);
2093 struct cplx_align align
= {alignment
, 0};
2094 cplx_align_assert_sane(align
);
2096 for (unsigned i
= 0; i
< num_slots
; i
++) {
2097 slots
[i
].is_live
= true;
2098 if (i
< num_slots
- 1)
2099 slots
[i
].contiguous
= true;
2101 align
.offset
= (i
* UNIFORM_SLOT_SIZE
) & (align
.mul
- 1);
2102 if (slots
[i
].align
.mul
== 0) {
2103 slots
[i
].align
= align
;
2105 slots
[i
].align
= cplx_align_combine(slots
[i
].align
, align
);
2111 * Assign UNIFORM file registers to either push constants or pull constants.
2113 * We allow a fragment shader to have more than the specified minimum
2114 * maximum number of fragment shader uniform components (64). If
2115 * there are too many of these, they'd fill up all of register space.
2116 * So, this will push some of them out to the pull constant buffer and
2117 * update the program to load them.
2120 fs_visitor::assign_constant_locations()
2122 /* Only the first compile gets to decide on locations. */
2123 if (push_constant_loc
) {
2124 assert(pull_constant_loc
);
2128 struct uniform_slot_info slots
[uniforms
];
2129 memset(slots
, 0, sizeof(slots
));
2131 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
2132 for (int i
= 0 ; i
< inst
->sources
; i
++) {
2133 if (inst
->src
[i
].file
!= UNIFORM
)
2136 /* NIR tightly packs things so the uniform number might not be
2137 * aligned (if we have a double right after a float, for instance).
2138 * This is fine because the process of re-arranging them will ensure
2139 * that things are properly aligned. The offset into that uniform,
2140 * however, must be aligned.
2142 * In Vulkan, we have explicit offsets but everything is crammed
2143 * into a single "variable" so inst->src[i].nr will always be 0.
2144 * Everything will be properly aligned relative to that one base.
2146 assert(inst
->src
[i
].offset
% type_sz(inst
->src
[i
].type
) == 0);
2148 unsigned u
= inst
->src
[i
].nr
+
2149 inst
->src
[i
].offset
/ UNIFORM_SLOT_SIZE
;
2154 unsigned slots_read
;
2155 if (inst
->opcode
== SHADER_OPCODE_MOV_INDIRECT
&& i
== 0) {
2156 slots_read
= DIV_ROUND_UP(inst
->src
[2].ud
, UNIFORM_SLOT_SIZE
);
2158 unsigned bytes_read
= inst
->components_read(i
) *
2159 type_sz(inst
->src
[i
].type
);
2160 slots_read
= DIV_ROUND_UP(bytes_read
, UNIFORM_SLOT_SIZE
);
2163 assert(u
+ slots_read
<= uniforms
);
2164 mark_uniform_slots_read(&slots
[u
], slots_read
,
2165 type_sz(inst
->src
[i
].type
));
2169 int subgroup_id_index
= get_subgroup_id_param_index(stage_prog_data
);
2171 /* Only allow 16 registers (128 uniform components) as push constants.
2173 * Just demote the end of the list. We could probably do better
2174 * here, demoting things that are rarely used in the program first.
2176 * If changing this value, note the limitation about total_regs in
2179 unsigned int max_push_components
= 16 * 8;
2180 if (subgroup_id_index
>= 0)
2181 max_push_components
--; /* Save a slot for the thread ID */
2183 /* We push small arrays, but no bigger than 16 floats. This is big enough
2184 * for a vec4 but hopefully not large enough to push out other stuff. We
2185 * should probably use a better heuristic at some point.
2187 const unsigned int max_chunk_size
= 16;
2189 unsigned int num_push_constants
= 0;
2190 unsigned int num_pull_constants
= 0;
2192 push_constant_loc
= ralloc_array(mem_ctx
, int, uniforms
);
2193 pull_constant_loc
= ralloc_array(mem_ctx
, int, uniforms
);
2195 /* Default to -1 meaning no location */
2196 memset(push_constant_loc
, -1, uniforms
* sizeof(*push_constant_loc
));
2197 memset(pull_constant_loc
, -1, uniforms
* sizeof(*pull_constant_loc
));
2199 int chunk_start
= -1;
2200 struct cplx_align align
;
2201 for (unsigned u
= 0; u
< uniforms
; u
++) {
2202 if (!slots
[u
].is_live
) {
2203 assert(chunk_start
== -1);
2207 /* Skip subgroup_id_index to put it in the last push register. */
2208 if (subgroup_id_index
== (int)u
)
2211 if (chunk_start
== -1) {
2213 align
= slots
[u
].align
;
2215 /* Offset into the chunk */
2216 unsigned chunk_offset
= (u
- chunk_start
) * UNIFORM_SLOT_SIZE
;
2218 /* Shift the slot alignment down by the chunk offset so it is
2219 * comparable with the base chunk alignment.
2221 struct cplx_align slot_align
= slots
[u
].align
;
2223 (slot_align
.offset
- chunk_offset
) & (align
.mul
- 1);
2225 align
= cplx_align_combine(align
, slot_align
);
2228 /* Sanity check the alignment */
2229 cplx_align_assert_sane(align
);
2231 if (slots
[u
].contiguous
)
2234 /* Adjust the alignment to be in terms of slots, not bytes */
2235 assert((align
.mul
& (UNIFORM_SLOT_SIZE
- 1)) == 0);
2236 assert((align
.offset
& (UNIFORM_SLOT_SIZE
- 1)) == 0);
2237 align
.mul
/= UNIFORM_SLOT_SIZE
;
2238 align
.offset
/= UNIFORM_SLOT_SIZE
;
2240 unsigned push_start_align
= cplx_align_apply(align
, num_push_constants
);
2241 unsigned chunk_size
= u
- chunk_start
+ 1;
2242 if ((!compiler
->supports_pull_constants
&& u
< UBO_START
) ||
2243 (chunk_size
< max_chunk_size
&&
2244 push_start_align
+ chunk_size
<= max_push_components
)) {
2245 /* Align up the number of push constants */
2246 num_push_constants
= push_start_align
;
2247 for (unsigned i
= 0; i
< chunk_size
; i
++)
2248 push_constant_loc
[chunk_start
+ i
] = num_push_constants
++;
2250 /* We need to pull this one */
2251 num_pull_constants
= cplx_align_apply(align
, num_pull_constants
);
2252 for (unsigned i
= 0; i
< chunk_size
; i
++)
2253 pull_constant_loc
[chunk_start
+ i
] = num_pull_constants
++;
2256 /* Reset the chunk and start again */
2260 /* Add the CS local thread ID uniform at the end of the push constants */
2261 if (subgroup_id_index
>= 0)
2262 push_constant_loc
[subgroup_id_index
] = num_push_constants
++;
2264 /* As the uniforms are going to be reordered, stash the old array and
2265 * create two new arrays for push/pull params.
2267 uint32_t *param
= stage_prog_data
->param
;
2268 stage_prog_data
->nr_params
= num_push_constants
;
2269 if (num_push_constants
) {
2270 stage_prog_data
->param
= rzalloc_array(mem_ctx
, uint32_t,
2271 num_push_constants
);
2273 stage_prog_data
->param
= NULL
;
2275 assert(stage_prog_data
->nr_pull_params
== 0);
2276 assert(stage_prog_data
->pull_param
== NULL
);
2277 if (num_pull_constants
> 0) {
2278 stage_prog_data
->nr_pull_params
= num_pull_constants
;
2279 stage_prog_data
->pull_param
= rzalloc_array(mem_ctx
, uint32_t,
2280 num_pull_constants
);
2283 /* Now that we know how many regular uniforms we'll push, reduce the
2284 * UBO push ranges so we don't exceed the 3DSTATE_CONSTANT limits.
2286 unsigned push_length
= DIV_ROUND_UP(stage_prog_data
->nr_params
, 8);
2287 for (int i
= 0; i
< 4; i
++) {
2288 struct brw_ubo_range
*range
= &prog_data
->ubo_ranges
[i
];
2290 if (push_length
+ range
->length
> 64)
2291 range
->length
= 64 - push_length
;
2293 push_length
+= range
->length
;
2295 assert(push_length
<= 64);
2297 /* Up until now, the param[] array has been indexed by reg + offset
2298 * of UNIFORM registers. Move pull constants into pull_param[] and
2299 * condense param[] to only contain the uniforms we chose to push.
2301 * NOTE: Because we are condensing the params[] array, we know that
2302 * push_constant_loc[i] <= i and we can do it in one smooth loop without
2303 * having to make a copy.
2305 for (unsigned int i
= 0; i
< uniforms
; i
++) {
2306 uint32_t value
= param
[i
];
2307 if (pull_constant_loc
[i
] != -1) {
2308 stage_prog_data
->pull_param
[pull_constant_loc
[i
]] = value
;
2309 } else if (push_constant_loc
[i
] != -1) {
2310 stage_prog_data
->param
[push_constant_loc
[i
]] = value
;
2317 fs_visitor::get_pull_locs(const fs_reg
&src
,
2318 unsigned *out_surf_index
,
2319 unsigned *out_pull_index
)
2321 assert(src
.file
== UNIFORM
);
2323 if (src
.nr
>= UBO_START
) {
2324 const struct brw_ubo_range
*range
=
2325 &prog_data
->ubo_ranges
[src
.nr
- UBO_START
];
2327 /* If this access is in our (reduced) range, use the push data. */
2328 if (src
.offset
/ 32 < range
->length
)
2331 *out_surf_index
= prog_data
->binding_table
.ubo_start
+ range
->block
;
2332 *out_pull_index
= (32 * range
->start
+ src
.offset
) / 4;
2336 const unsigned location
= src
.nr
+ src
.offset
/ 4;
2338 if (location
< uniforms
&& pull_constant_loc
[location
] != -1) {
2339 /* A regular uniform push constant */
2340 *out_surf_index
= stage_prog_data
->binding_table
.pull_constants_start
;
2341 *out_pull_index
= pull_constant_loc
[location
];
2349 * Replace UNIFORM register file access with either UNIFORM_PULL_CONSTANT_LOAD
2350 * or VARYING_PULL_CONSTANT_LOAD instructions which load values into VGRFs.
2353 fs_visitor::lower_constant_loads()
2355 unsigned index
, pull_index
;
2357 foreach_block_and_inst_safe (block
, fs_inst
, inst
, cfg
) {
2358 /* Set up the annotation tracking for new generated instructions. */
2359 const fs_builder
ibld(this, block
, inst
);
2361 for (int i
= 0; i
< inst
->sources
; i
++) {
2362 if (inst
->src
[i
].file
!= UNIFORM
)
2365 /* We'll handle this case later */
2366 if (inst
->opcode
== SHADER_OPCODE_MOV_INDIRECT
&& i
== 0)
2369 if (!get_pull_locs(inst
->src
[i
], &index
, &pull_index
))
2372 assert(inst
->src
[i
].stride
== 0);
2374 const unsigned block_sz
= 64; /* Fetch one cacheline at a time. */
2375 const fs_builder ubld
= ibld
.exec_all().group(block_sz
/ 4, 0);
2376 const fs_reg dst
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
);
2377 const unsigned base
= pull_index
* 4;
2379 ubld
.emit(FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD
,
2380 dst
, brw_imm_ud(index
), brw_imm_ud(base
& ~(block_sz
- 1)));
2382 /* Rewrite the instruction to use the temporary VGRF. */
2383 inst
->src
[i
].file
= VGRF
;
2384 inst
->src
[i
].nr
= dst
.nr
;
2385 inst
->src
[i
].offset
= (base
& (block_sz
- 1)) +
2386 inst
->src
[i
].offset
% 4;
2389 if (inst
->opcode
== SHADER_OPCODE_MOV_INDIRECT
&&
2390 inst
->src
[0].file
== UNIFORM
) {
2392 if (!get_pull_locs(inst
->src
[0], &index
, &pull_index
))
2395 VARYING_PULL_CONSTANT_LOAD(ibld
, inst
->dst
,
2399 inst
->remove(block
);
2402 invalidate_live_intervals();
2406 fs_visitor::opt_algebraic()
2408 bool progress
= false;
2410 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
2411 switch (inst
->opcode
) {
2412 case BRW_OPCODE_MOV
:
2413 if (!devinfo
->has_64bit_types
&&
2414 (inst
->dst
.type
== BRW_REGISTER_TYPE_DF
||
2415 inst
->dst
.type
== BRW_REGISTER_TYPE_UQ
||
2416 inst
->dst
.type
== BRW_REGISTER_TYPE_Q
)) {
2417 assert(inst
->dst
.type
== inst
->src
[0].type
);
2418 assert(!inst
->saturate
);
2419 assert(!inst
->src
[0].abs
);
2420 assert(!inst
->src
[0].negate
);
2421 const brw::fs_builder
ibld(this, block
, inst
);
2423 if (inst
->src
[0].file
== IMM
) {
2424 ibld
.MOV(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 1),
2425 brw_imm_ud(inst
->src
[0].u64
>> 32));
2426 ibld
.MOV(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 0),
2427 brw_imm_ud(inst
->src
[0].u64
));
2429 ibld
.MOV(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 1),
2430 subscript(inst
->src
[0], BRW_REGISTER_TYPE_UD
, 1));
2431 ibld
.MOV(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 0),
2432 subscript(inst
->src
[0], BRW_REGISTER_TYPE_UD
, 0));
2435 inst
->remove(block
);
2439 if ((inst
->conditional_mod
== BRW_CONDITIONAL_Z
||
2440 inst
->conditional_mod
== BRW_CONDITIONAL_NZ
) &&
2441 inst
->dst
.is_null() &&
2442 (inst
->src
[0].abs
|| inst
->src
[0].negate
)) {
2443 inst
->src
[0].abs
= false;
2444 inst
->src
[0].negate
= false;
2449 if (inst
->src
[0].file
!= IMM
)
2452 if (inst
->saturate
) {
2453 /* Full mixed-type saturates don't happen. However, we can end up
2456 * mov.sat(8) g21<1>DF -1F
2458 * Other mixed-size-but-same-base-type cases may also be possible.
2460 if (inst
->dst
.type
!= inst
->src
[0].type
&&
2461 inst
->dst
.type
!= BRW_REGISTER_TYPE_DF
&&
2462 inst
->src
[0].type
!= BRW_REGISTER_TYPE_F
)
2463 assert(!"unimplemented: saturate mixed types");
2465 if (brw_saturate_immediate(inst
->src
[0].type
,
2466 &inst
->src
[0].as_brw_reg())) {
2467 inst
->saturate
= false;
2473 case BRW_OPCODE_MUL
:
2474 if (inst
->src
[1].file
!= IMM
)
2478 if (inst
->src
[1].is_one()) {
2479 inst
->opcode
= BRW_OPCODE_MOV
;
2480 inst
->src
[1] = reg_undef
;
2486 if (inst
->src
[1].is_negative_one()) {
2487 inst
->opcode
= BRW_OPCODE_MOV
;
2488 inst
->src
[0].negate
= !inst
->src
[0].negate
;
2489 inst
->src
[1] = reg_undef
;
2495 if (inst
->src
[1].is_zero()) {
2496 inst
->opcode
= BRW_OPCODE_MOV
;
2497 inst
->src
[0] = inst
->src
[1];
2498 inst
->src
[1] = reg_undef
;
2503 if (inst
->src
[0].file
== IMM
) {
2504 assert(inst
->src
[0].type
== BRW_REGISTER_TYPE_F
);
2505 inst
->opcode
= BRW_OPCODE_MOV
;
2506 inst
->src
[0].f
*= inst
->src
[1].f
;
2507 inst
->src
[1] = reg_undef
;
2512 case BRW_OPCODE_ADD
:
2513 if (inst
->src
[1].file
!= IMM
)
2517 if (inst
->src
[1].is_zero()) {
2518 inst
->opcode
= BRW_OPCODE_MOV
;
2519 inst
->src
[1] = reg_undef
;
2524 if (inst
->src
[0].file
== IMM
) {
2525 assert(inst
->src
[0].type
== BRW_REGISTER_TYPE_F
);
2526 inst
->opcode
= BRW_OPCODE_MOV
;
2527 inst
->src
[0].f
+= inst
->src
[1].f
;
2528 inst
->src
[1] = reg_undef
;
2534 if (inst
->src
[0].equals(inst
->src
[1]) ||
2535 inst
->src
[1].is_zero()) {
2536 inst
->opcode
= BRW_OPCODE_MOV
;
2537 inst
->src
[1] = reg_undef
;
2542 case BRW_OPCODE_LRP
:
2543 if (inst
->src
[1].equals(inst
->src
[2])) {
2544 inst
->opcode
= BRW_OPCODE_MOV
;
2545 inst
->src
[0] = inst
->src
[1];
2546 inst
->src
[1] = reg_undef
;
2547 inst
->src
[2] = reg_undef
;
2552 case BRW_OPCODE_CMP
:
2553 if ((inst
->conditional_mod
== BRW_CONDITIONAL_Z
||
2554 inst
->conditional_mod
== BRW_CONDITIONAL_NZ
) &&
2555 inst
->src
[1].is_zero() &&
2556 (inst
->src
[0].abs
|| inst
->src
[0].negate
)) {
2557 inst
->src
[0].abs
= false;
2558 inst
->src
[0].negate
= false;
2563 case BRW_OPCODE_SEL
:
2564 if (!devinfo
->has_64bit_types
&&
2565 (inst
->dst
.type
== BRW_REGISTER_TYPE_DF
||
2566 inst
->dst
.type
== BRW_REGISTER_TYPE_UQ
||
2567 inst
->dst
.type
== BRW_REGISTER_TYPE_Q
)) {
2568 assert(inst
->dst
.type
== inst
->src
[0].type
);
2569 assert(!inst
->saturate
);
2570 assert(!inst
->src
[0].abs
&& !inst
->src
[0].negate
);
2571 assert(!inst
->src
[1].abs
&& !inst
->src
[1].negate
);
2572 const brw::fs_builder
ibld(this, block
, inst
);
2574 set_predicate(inst
->predicate
,
2575 ibld
.SEL(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 0),
2576 subscript(inst
->src
[0], BRW_REGISTER_TYPE_UD
, 0),
2577 subscript(inst
->src
[1], BRW_REGISTER_TYPE_UD
, 0)));
2578 set_predicate(inst
->predicate
,
2579 ibld
.SEL(subscript(inst
->dst
, BRW_REGISTER_TYPE_UD
, 1),
2580 subscript(inst
->src
[0], BRW_REGISTER_TYPE_UD
, 1),
2581 subscript(inst
->src
[1], BRW_REGISTER_TYPE_UD
, 1)));
2583 inst
->remove(block
);
2586 if (inst
->src
[0].equals(inst
->src
[1])) {
2587 inst
->opcode
= BRW_OPCODE_MOV
;
2588 inst
->src
[1] = reg_undef
;
2589 inst
->predicate
= BRW_PREDICATE_NONE
;
2590 inst
->predicate_inverse
= false;
2592 } else if (inst
->saturate
&& inst
->src
[1].file
== IMM
) {
2593 switch (inst
->conditional_mod
) {
2594 case BRW_CONDITIONAL_LE
:
2595 case BRW_CONDITIONAL_L
:
2596 switch (inst
->src
[1].type
) {
2597 case BRW_REGISTER_TYPE_F
:
2598 if (inst
->src
[1].f
>= 1.0f
) {
2599 inst
->opcode
= BRW_OPCODE_MOV
;
2600 inst
->src
[1] = reg_undef
;
2601 inst
->conditional_mod
= BRW_CONDITIONAL_NONE
;
2609 case BRW_CONDITIONAL_GE
:
2610 case BRW_CONDITIONAL_G
:
2611 switch (inst
->src
[1].type
) {
2612 case BRW_REGISTER_TYPE_F
:
2613 if (inst
->src
[1].f
<= 0.0f
) {
2614 inst
->opcode
= BRW_OPCODE_MOV
;
2615 inst
->src
[1] = reg_undef
;
2616 inst
->conditional_mod
= BRW_CONDITIONAL_NONE
;
2628 case BRW_OPCODE_MAD
:
2629 if (inst
->src
[1].is_zero() || inst
->src
[2].is_zero()) {
2630 inst
->opcode
= BRW_OPCODE_MOV
;
2631 inst
->src
[1] = reg_undef
;
2632 inst
->src
[2] = reg_undef
;
2634 } else if (inst
->src
[0].is_zero()) {
2635 inst
->opcode
= BRW_OPCODE_MUL
;
2636 inst
->src
[0] = inst
->src
[2];
2637 inst
->src
[2] = reg_undef
;
2639 } else if (inst
->src
[1].is_one()) {
2640 inst
->opcode
= BRW_OPCODE_ADD
;
2641 inst
->src
[1] = inst
->src
[2];
2642 inst
->src
[2] = reg_undef
;
2644 } else if (inst
->src
[2].is_one()) {
2645 inst
->opcode
= BRW_OPCODE_ADD
;
2646 inst
->src
[2] = reg_undef
;
2648 } else if (inst
->src
[1].file
== IMM
&& inst
->src
[2].file
== IMM
) {
2649 inst
->opcode
= BRW_OPCODE_ADD
;
2650 inst
->src
[1].f
*= inst
->src
[2].f
;
2651 inst
->src
[2] = reg_undef
;
2655 case SHADER_OPCODE_BROADCAST
:
2656 if (is_uniform(inst
->src
[0])) {
2657 inst
->opcode
= BRW_OPCODE_MOV
;
2659 inst
->force_writemask_all
= true;
2661 } else if (inst
->src
[1].file
== IMM
) {
2662 inst
->opcode
= BRW_OPCODE_MOV
;
2663 /* It's possible that the selected component will be too large and
2664 * overflow the register. This can happen if someone does a
2665 * readInvocation() from GLSL or SPIR-V and provides an OOB
2666 * invocationIndex. If this happens and we some how manage
2667 * to constant fold it in and get here, then component() may cause
2668 * us to start reading outside of the VGRF which will lead to an
2669 * assert later. Instead, just let it wrap around if it goes over
2672 const unsigned comp
= inst
->src
[1].ud
& (inst
->exec_size
- 1);
2673 inst
->src
[0] = component(inst
->src
[0], comp
);
2675 inst
->force_writemask_all
= true;
2680 case SHADER_OPCODE_SHUFFLE
:
2681 if (is_uniform(inst
->src
[0])) {
2682 inst
->opcode
= BRW_OPCODE_MOV
;
2685 } else if (inst
->src
[1].file
== IMM
) {
2686 inst
->opcode
= BRW_OPCODE_MOV
;
2687 inst
->src
[0] = component(inst
->src
[0],
2698 /* Swap if src[0] is immediate. */
2699 if (progress
&& inst
->is_commutative()) {
2700 if (inst
->src
[0].file
== IMM
) {
2701 fs_reg tmp
= inst
->src
[1];
2702 inst
->src
[1] = inst
->src
[0];
2711 * Optimize sample messages that have constant zero values for the trailing
2712 * texture coordinates. We can just reduce the message length for these
2713 * instructions instead of reserving a register for it. Trailing parameters
2714 * that aren't sent default to zero anyway. This will cause the dead code
2715 * eliminator to remove the MOV instruction that would otherwise be emitted to
2716 * set up the zero value.
2719 fs_visitor::opt_zero_samples()
2721 /* Gen4 infers the texturing opcode based on the message length so we can't
2724 if (devinfo
->gen
< 5)
2727 bool progress
= false;
2729 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
2730 if (!inst
->is_tex())
2733 fs_inst
*load_payload
= (fs_inst
*) inst
->prev
;
2735 if (load_payload
->is_head_sentinel() ||
2736 load_payload
->opcode
!= SHADER_OPCODE_LOAD_PAYLOAD
)
2739 /* We don't want to remove the message header or the first parameter.
2740 * Removing the first parameter is not allowed, see the Haswell PRM
2741 * volume 7, page 149:
2743 * "Parameter 0 is required except for the sampleinfo message, which
2744 * has no parameter 0"
2746 while (inst
->mlen
> inst
->header_size
+ inst
->exec_size
/ 8 &&
2747 load_payload
->src
[(inst
->mlen
- inst
->header_size
) /
2748 (inst
->exec_size
/ 8) +
2749 inst
->header_size
- 1].is_zero()) {
2750 inst
->mlen
-= inst
->exec_size
/ 8;
2756 invalidate_live_intervals();
2762 * Optimize sample messages which are followed by the final RT write.
2764 * CHV, and GEN9+ can mark a texturing SEND instruction with EOT to have its
2765 * results sent directly to the framebuffer, bypassing the EU. Recognize the
2766 * final texturing results copied to the framebuffer write payload and modify
2767 * them to write to the framebuffer directly.
2770 fs_visitor::opt_sampler_eot()
2772 brw_wm_prog_key
*key
= (brw_wm_prog_key
*) this->key
;
2774 if (stage
!= MESA_SHADER_FRAGMENT
|| dispatch_width
> 16)
2777 if (devinfo
->gen
!= 9 && !devinfo
->is_cherryview
)
2780 /* FINISHME: It should be possible to implement this optimization when there
2781 * are multiple drawbuffers.
2783 if (key
->nr_color_regions
!= 1)
2786 /* Requires emitting a bunch of saturating MOV instructions during logical
2787 * send lowering to clamp the color payload, which the sampler unit isn't
2788 * going to do for us.
2790 if (key
->clamp_fragment_color
)
2793 /* Look for a texturing instruction immediately before the final FB_WRITE. */
2794 bblock_t
*block
= cfg
->blocks
[cfg
->num_blocks
- 1];
2795 fs_inst
*fb_write
= (fs_inst
*)block
->end();
2796 assert(fb_write
->eot
);
2797 assert(fb_write
->opcode
== FS_OPCODE_FB_WRITE_LOGICAL
);
2799 /* There wasn't one; nothing to do. */
2800 if (unlikely(fb_write
->prev
->is_head_sentinel()))
2803 fs_inst
*tex_inst
= (fs_inst
*) fb_write
->prev
;
2805 /* 3D Sampler » Messages » Message Format
2807 * “Response Length of zero is allowed on all SIMD8* and SIMD16* sampler
2808 * messages except sample+killpix, resinfo, sampleinfo, LOD, and gather4*”
2810 if (tex_inst
->opcode
!= SHADER_OPCODE_TEX_LOGICAL
&&
2811 tex_inst
->opcode
!= SHADER_OPCODE_TXD_LOGICAL
&&
2812 tex_inst
->opcode
!= SHADER_OPCODE_TXF_LOGICAL
&&
2813 tex_inst
->opcode
!= SHADER_OPCODE_TXL_LOGICAL
&&
2814 tex_inst
->opcode
!= FS_OPCODE_TXB_LOGICAL
&&
2815 tex_inst
->opcode
!= SHADER_OPCODE_TXF_CMS_LOGICAL
&&
2816 tex_inst
->opcode
!= SHADER_OPCODE_TXF_CMS_W_LOGICAL
&&
2817 tex_inst
->opcode
!= SHADER_OPCODE_TXF_UMS_LOGICAL
)
2820 /* XXX - This shouldn't be necessary. */
2821 if (tex_inst
->prev
->is_head_sentinel())
2824 /* Check that the FB write sources are fully initialized by the single
2825 * texturing instruction.
2827 for (unsigned i
= 0; i
< FB_WRITE_LOGICAL_NUM_SRCS
; i
++) {
2828 if (i
== FB_WRITE_LOGICAL_SRC_COLOR0
) {
2829 if (!fb_write
->src
[i
].equals(tex_inst
->dst
) ||
2830 fb_write
->size_read(i
) != tex_inst
->size_written
)
2832 } else if (i
!= FB_WRITE_LOGICAL_SRC_COMPONENTS
) {
2833 if (fb_write
->src
[i
].file
!= BAD_FILE
)
2838 assert(!tex_inst
->eot
); /* We can't get here twice */
2839 assert((tex_inst
->offset
& (0xff << 24)) == 0);
2841 const fs_builder
ibld(this, block
, tex_inst
);
2843 tex_inst
->offset
|= fb_write
->target
<< 24;
2844 tex_inst
->eot
= true;
2845 tex_inst
->dst
= ibld
.null_reg_ud();
2846 tex_inst
->size_written
= 0;
2847 fb_write
->remove(cfg
->blocks
[cfg
->num_blocks
- 1]);
2849 /* Marking EOT is sufficient, lower_logical_sends() will notice the EOT
2850 * flag and submit a header together with the sampler message as required
2853 invalidate_live_intervals();
2858 fs_visitor::opt_register_renaming()
2860 bool progress
= false;
2863 unsigned remap
[alloc
.count
];
2864 memset(remap
, ~0u, sizeof(unsigned) * alloc
.count
);
2866 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
2867 if (inst
->opcode
== BRW_OPCODE_IF
|| inst
->opcode
== BRW_OPCODE_DO
) {
2869 } else if (inst
->opcode
== BRW_OPCODE_ENDIF
||
2870 inst
->opcode
== BRW_OPCODE_WHILE
) {
2874 /* Rewrite instruction sources. */
2875 for (int i
= 0; i
< inst
->sources
; i
++) {
2876 if (inst
->src
[i
].file
== VGRF
&&
2877 remap
[inst
->src
[i
].nr
] != ~0u &&
2878 remap
[inst
->src
[i
].nr
] != inst
->src
[i
].nr
) {
2879 inst
->src
[i
].nr
= remap
[inst
->src
[i
].nr
];
2884 const unsigned dst
= inst
->dst
.nr
;
2887 inst
->dst
.file
== VGRF
&&
2888 alloc
.sizes
[inst
->dst
.nr
] * REG_SIZE
== inst
->size_written
&&
2889 !inst
->is_partial_write()) {
2890 if (remap
[dst
] == ~0u) {
2893 remap
[dst
] = alloc
.allocate(regs_written(inst
));
2894 inst
->dst
.nr
= remap
[dst
];
2897 } else if (inst
->dst
.file
== VGRF
&&
2898 remap
[dst
] != ~0u &&
2899 remap
[dst
] != dst
) {
2900 inst
->dst
.nr
= remap
[dst
];
2906 invalidate_live_intervals();
2908 for (unsigned i
= 0; i
< ARRAY_SIZE(delta_xy
); i
++) {
2909 if (delta_xy
[i
].file
== VGRF
&& remap
[delta_xy
[i
].nr
] != ~0u) {
2910 delta_xy
[i
].nr
= remap
[delta_xy
[i
].nr
];
2919 * Remove redundant or useless discard jumps.
2921 * For example, we can eliminate jumps in the following sequence:
2923 * discard-jump (redundant with the next jump)
2924 * discard-jump (useless; jumps to the next instruction)
2928 fs_visitor::opt_redundant_discard_jumps()
2930 bool progress
= false;
2932 bblock_t
*last_bblock
= cfg
->blocks
[cfg
->num_blocks
- 1];
2934 fs_inst
*placeholder_halt
= NULL
;
2935 foreach_inst_in_block_reverse(fs_inst
, inst
, last_bblock
) {
2936 if (inst
->opcode
== FS_OPCODE_PLACEHOLDER_HALT
) {
2937 placeholder_halt
= inst
;
2942 if (!placeholder_halt
)
2945 /* Delete any HALTs immediately before the placeholder halt. */
2946 for (fs_inst
*prev
= (fs_inst
*) placeholder_halt
->prev
;
2947 !prev
->is_head_sentinel() && prev
->opcode
== FS_OPCODE_DISCARD_JUMP
;
2948 prev
= (fs_inst
*) placeholder_halt
->prev
) {
2949 prev
->remove(last_bblock
);
2954 invalidate_live_intervals();
2960 * Compute a bitmask with GRF granularity with a bit set for each GRF starting
2961 * from \p r.offset which overlaps the region starting at \p s.offset and
2962 * spanning \p ds bytes.
2964 static inline unsigned
2965 mask_relative_to(const fs_reg
&r
, const fs_reg
&s
, unsigned ds
)
2967 const int rel_offset
= reg_offset(s
) - reg_offset(r
);
2968 const int shift
= rel_offset
/ REG_SIZE
;
2969 const unsigned n
= DIV_ROUND_UP(rel_offset
% REG_SIZE
+ ds
, REG_SIZE
);
2970 assert(reg_space(r
) == reg_space(s
) &&
2971 shift
>= 0 && shift
< int(8 * sizeof(unsigned)));
2972 return ((1 << n
) - 1) << shift
;
2976 fs_visitor::opt_peephole_csel()
2978 if (devinfo
->gen
< 8)
2981 bool progress
= false;
2983 foreach_block_reverse(block
, cfg
) {
2984 int ip
= block
->end_ip
+ 1;
2986 foreach_inst_in_block_reverse_safe(fs_inst
, inst
, block
) {
2989 if (inst
->opcode
!= BRW_OPCODE_SEL
||
2990 inst
->predicate
!= BRW_PREDICATE_NORMAL
||
2991 (inst
->dst
.type
!= BRW_REGISTER_TYPE_F
&&
2992 inst
->dst
.type
!= BRW_REGISTER_TYPE_D
&&
2993 inst
->dst
.type
!= BRW_REGISTER_TYPE_UD
))
2996 /* Because it is a 3-src instruction, CSEL cannot have an immediate
2997 * value as a source, but we can sometimes handle zero.
2999 if ((inst
->src
[0].file
!= VGRF
&& inst
->src
[0].file
!= ATTR
&&
3000 inst
->src
[0].file
!= UNIFORM
) ||
3001 (inst
->src
[1].file
!= VGRF
&& inst
->src
[1].file
!= ATTR
&&
3002 inst
->src
[1].file
!= UNIFORM
&& !inst
->src
[1].is_zero()))
3005 foreach_inst_in_block_reverse_starting_from(fs_inst
, scan_inst
, inst
) {
3006 if (!scan_inst
->flags_written())
3009 if ((scan_inst
->opcode
!= BRW_OPCODE_CMP
&&
3010 scan_inst
->opcode
!= BRW_OPCODE_MOV
) ||
3011 scan_inst
->predicate
!= BRW_PREDICATE_NONE
||
3012 (scan_inst
->src
[0].file
!= VGRF
&&
3013 scan_inst
->src
[0].file
!= ATTR
&&
3014 scan_inst
->src
[0].file
!= UNIFORM
) ||
3015 scan_inst
->src
[0].type
!= BRW_REGISTER_TYPE_F
)
3018 if (scan_inst
->opcode
== BRW_OPCODE_CMP
&& !scan_inst
->src
[1].is_zero())
3021 const brw::fs_builder
ibld(this, block
, inst
);
3023 const enum brw_conditional_mod cond
=
3024 inst
->predicate_inverse
3025 ? brw_negate_cmod(scan_inst
->conditional_mod
)
3026 : scan_inst
->conditional_mod
;
3028 fs_inst
*csel_inst
= NULL
;
3030 if (inst
->src
[1].file
!= IMM
) {
3031 csel_inst
= ibld
.CSEL(inst
->dst
,
3036 } else if (cond
== BRW_CONDITIONAL_NZ
) {
3037 /* Consider the sequence
3039 * cmp.nz.f0 null<1>F g3<8,8,1>F 0F
3040 * (+f0) sel g124<1>UD g2<8,8,1>UD 0x00000000UD
3042 * The sel will pick the immediate value 0 if r0 is ±0.0.
3043 * Therefore, this sequence is equivalent:
3045 * cmp.nz.f0 null<1>F g3<8,8,1>F 0F
3046 * (+f0) sel g124<1>F g2<8,8,1>F (abs)g3<8,8,1>F
3048 * The abs is ensures that the result is 0UD when g3 is -0.0F.
3049 * By normal cmp-sel merging, this is also equivalent:
3051 * csel.nz g124<1>F g2<4,4,1>F (abs)g3<4,4,1>F g3<4,4,1>F
3053 csel_inst
= ibld
.CSEL(inst
->dst
,
3059 csel_inst
->src
[1].abs
= true;
3062 if (csel_inst
!= NULL
) {
3064 inst
->remove(block
);
3076 fs_visitor::compute_to_mrf()
3078 bool progress
= false;
3081 /* No MRFs on Gen >= 7. */
3082 if (devinfo
->gen
>= 7)
3085 calculate_live_intervals();
3087 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
3091 if (inst
->opcode
!= BRW_OPCODE_MOV
||
3092 inst
->is_partial_write() ||
3093 inst
->dst
.file
!= MRF
|| inst
->src
[0].file
!= VGRF
||
3094 inst
->dst
.type
!= inst
->src
[0].type
||
3095 inst
->src
[0].abs
|| inst
->src
[0].negate
||
3096 !inst
->src
[0].is_contiguous() ||
3097 inst
->src
[0].offset
% REG_SIZE
!= 0)
3100 /* Can't compute-to-MRF this GRF if someone else was going to
3103 if (this->virtual_grf_end
[inst
->src
[0].nr
] > ip
)
3106 /* Found a move of a GRF to a MRF. Let's see if we can go rewrite the
3107 * things that computed the value of all GRFs of the source region. The
3108 * regs_left bitset keeps track of the registers we haven't yet found a
3109 * generating instruction for.
3111 unsigned regs_left
= (1 << regs_read(inst
, 0)) - 1;
3113 foreach_inst_in_block_reverse_starting_from(fs_inst
, scan_inst
, inst
) {
3114 if (regions_overlap(scan_inst
->dst
, scan_inst
->size_written
,
3115 inst
->src
[0], inst
->size_read(0))) {
3116 /* Found the last thing to write our reg we want to turn
3117 * into a compute-to-MRF.
3120 /* If this one instruction didn't populate all the
3121 * channels, bail. We might be able to rewrite everything
3122 * that writes that reg, but it would require smarter
3125 if (scan_inst
->is_partial_write())
3128 /* Handling things not fully contained in the source of the copy
3129 * would need us to understand coalescing out more than one MOV at
3132 if (!region_contained_in(scan_inst
->dst
, scan_inst
->size_written
,
3133 inst
->src
[0], inst
->size_read(0)))
3136 /* SEND instructions can't have MRF as a destination. */
3137 if (scan_inst
->mlen
)
3140 if (devinfo
->gen
== 6) {
3141 /* gen6 math instructions must have the destination be
3142 * GRF, so no compute-to-MRF for them.
3144 if (scan_inst
->is_math()) {
3149 /* Clear the bits for any registers this instruction overwrites. */
3150 regs_left
&= ~mask_relative_to(
3151 inst
->src
[0], scan_inst
->dst
, scan_inst
->size_written
);
3156 /* We don't handle control flow here. Most computation of
3157 * values that end up in MRFs are shortly before the MRF
3160 if (block
->start() == scan_inst
)
3163 /* You can't read from an MRF, so if someone else reads our
3164 * MRF's source GRF that we wanted to rewrite, that stops us.
3166 bool interfered
= false;
3167 for (int i
= 0; i
< scan_inst
->sources
; i
++) {
3168 if (regions_overlap(scan_inst
->src
[i
], scan_inst
->size_read(i
),
3169 inst
->src
[0], inst
->size_read(0))) {
3176 if (regions_overlap(scan_inst
->dst
, scan_inst
->size_written
,
3177 inst
->dst
, inst
->size_written
)) {
3178 /* If somebody else writes our MRF here, we can't
3179 * compute-to-MRF before that.
3184 if (scan_inst
->mlen
> 0 && scan_inst
->base_mrf
!= -1 &&
3185 regions_overlap(fs_reg(MRF
, scan_inst
->base_mrf
), scan_inst
->mlen
* REG_SIZE
,
3186 inst
->dst
, inst
->size_written
)) {
3187 /* Found a SEND instruction, which means that there are
3188 * live values in MRFs from base_mrf to base_mrf +
3189 * scan_inst->mlen - 1. Don't go pushing our MRF write up
3199 /* Found all generating instructions of our MRF's source value, so it
3200 * should be safe to rewrite them to point to the MRF directly.
3202 regs_left
= (1 << regs_read(inst
, 0)) - 1;
3204 foreach_inst_in_block_reverse_starting_from(fs_inst
, scan_inst
, inst
) {
3205 if (regions_overlap(scan_inst
->dst
, scan_inst
->size_written
,
3206 inst
->src
[0], inst
->size_read(0))) {
3207 /* Clear the bits for any registers this instruction overwrites. */
3208 regs_left
&= ~mask_relative_to(
3209 inst
->src
[0], scan_inst
->dst
, scan_inst
->size_written
);
3211 const unsigned rel_offset
= reg_offset(scan_inst
->dst
) -
3212 reg_offset(inst
->src
[0]);
3214 if (inst
->dst
.nr
& BRW_MRF_COMPR4
) {
3215 /* Apply the same address transformation done by the hardware
3216 * for COMPR4 MRF writes.
3218 assert(rel_offset
< 2 * REG_SIZE
);
3219 scan_inst
->dst
.nr
= inst
->dst
.nr
+ rel_offset
/ REG_SIZE
* 4;
3221 /* Clear the COMPR4 bit if the generating instruction is not
3224 if (scan_inst
->size_written
< 2 * REG_SIZE
)
3225 scan_inst
->dst
.nr
&= ~BRW_MRF_COMPR4
;
3228 /* Calculate the MRF number the result of this instruction is
3229 * ultimately written to.
3231 scan_inst
->dst
.nr
= inst
->dst
.nr
+ rel_offset
/ REG_SIZE
;
3234 scan_inst
->dst
.file
= MRF
;
3235 scan_inst
->dst
.offset
= inst
->dst
.offset
+ rel_offset
% REG_SIZE
;
3236 scan_inst
->saturate
|= inst
->saturate
;
3243 inst
->remove(block
);
3248 invalidate_live_intervals();
3254 * Eliminate FIND_LIVE_CHANNEL instructions occurring outside any control
3255 * flow. We could probably do better here with some form of divergence
3259 fs_visitor::eliminate_find_live_channel()
3261 bool progress
= false;
3264 if (!brw_stage_has_packed_dispatch(devinfo
, stage
, stage_prog_data
)) {
3265 /* The optimization below assumes that channel zero is live on thread
3266 * dispatch, which may not be the case if the fixed function dispatches
3272 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
3273 switch (inst
->opcode
) {
3279 case BRW_OPCODE_ENDIF
:
3280 case BRW_OPCODE_WHILE
:
3284 case FS_OPCODE_DISCARD_JUMP
:
3285 /* This can potentially make control flow non-uniform until the end
3290 case SHADER_OPCODE_FIND_LIVE_CHANNEL
:
3292 inst
->opcode
= BRW_OPCODE_MOV
;
3293 inst
->src
[0] = brw_imm_ud(0u);
3295 inst
->force_writemask_all
= true;
3309 * Once we've generated code, try to convert normal FS_OPCODE_FB_WRITE
3310 * instructions to FS_OPCODE_REP_FB_WRITE.
3313 fs_visitor::emit_repclear_shader()
3315 brw_wm_prog_key
*key
= (brw_wm_prog_key
*) this->key
;
3317 int color_mrf
= base_mrf
+ 2;
3321 mov
= bld
.exec_all().group(4, 0)
3322 .MOV(brw_message_reg(color_mrf
),
3323 fs_reg(UNIFORM
, 0, BRW_REGISTER_TYPE_F
));
3325 struct brw_reg reg
=
3326 brw_reg(BRW_GENERAL_REGISTER_FILE
, 2, 3, 0, 0, BRW_REGISTER_TYPE_F
,
3327 BRW_VERTICAL_STRIDE_8
, BRW_WIDTH_2
, BRW_HORIZONTAL_STRIDE_4
,
3328 BRW_SWIZZLE_XYZW
, WRITEMASK_XYZW
);
3330 mov
= bld
.exec_all().group(4, 0)
3331 .MOV(vec4(brw_message_reg(color_mrf
)), fs_reg(reg
));
3334 fs_inst
*write
= NULL
;
3335 if (key
->nr_color_regions
== 1) {
3336 write
= bld
.emit(FS_OPCODE_REP_FB_WRITE
);
3337 write
->saturate
= key
->clamp_fragment_color
;
3338 write
->base_mrf
= color_mrf
;
3340 write
->header_size
= 0;
3343 assume(key
->nr_color_regions
> 0);
3345 struct brw_reg header
=
3346 retype(brw_message_reg(base_mrf
), BRW_REGISTER_TYPE_UD
);
3347 bld
.exec_all().group(16, 0)
3348 .MOV(header
, retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD
));
3350 for (int i
= 0; i
< key
->nr_color_regions
; ++i
) {
3352 bld
.exec_all().group(1, 0)
3353 .MOV(component(header
, 2), brw_imm_ud(i
));
3356 write
= bld
.emit(FS_OPCODE_REP_FB_WRITE
);
3357 write
->saturate
= key
->clamp_fragment_color
;
3358 write
->base_mrf
= base_mrf
;
3360 write
->header_size
= 2;
3365 write
->last_rt
= true;
3369 assign_constant_locations();
3370 assign_curb_setup();
3372 /* Now that we have the uniform assigned, go ahead and force it to a vec4. */
3374 assert(mov
->src
[0].file
== FIXED_GRF
);
3375 mov
->src
[0] = brw_vec4_grf(mov
->src
[0].nr
, 0);
3380 * Walks through basic blocks, looking for repeated MRF writes and
3381 * removing the later ones.
3384 fs_visitor::remove_duplicate_mrf_writes()
3386 fs_inst
*last_mrf_move
[BRW_MAX_MRF(devinfo
->gen
)];
3387 bool progress
= false;
3389 /* Need to update the MRF tracking for compressed instructions. */
3390 if (dispatch_width
>= 16)
3393 memset(last_mrf_move
, 0, sizeof(last_mrf_move
));
3395 foreach_block_and_inst_safe (block
, fs_inst
, inst
, cfg
) {
3396 if (inst
->is_control_flow()) {
3397 memset(last_mrf_move
, 0, sizeof(last_mrf_move
));
3400 if (inst
->opcode
== BRW_OPCODE_MOV
&&
3401 inst
->dst
.file
== MRF
) {
3402 fs_inst
*prev_inst
= last_mrf_move
[inst
->dst
.nr
];
3403 if (prev_inst
&& prev_inst
->opcode
== BRW_OPCODE_MOV
&&
3404 inst
->dst
.equals(prev_inst
->dst
) &&
3405 inst
->src
[0].equals(prev_inst
->src
[0]) &&
3406 inst
->saturate
== prev_inst
->saturate
&&
3407 inst
->predicate
== prev_inst
->predicate
&&
3408 inst
->conditional_mod
== prev_inst
->conditional_mod
&&
3409 inst
->exec_size
== prev_inst
->exec_size
) {
3410 inst
->remove(block
);
3416 /* Clear out the last-write records for MRFs that were overwritten. */
3417 if (inst
->dst
.file
== MRF
) {
3418 last_mrf_move
[inst
->dst
.nr
] = NULL
;
3421 if (inst
->mlen
> 0 && inst
->base_mrf
!= -1) {
3422 /* Found a SEND instruction, which will include two or fewer
3423 * implied MRF writes. We could do better here.
3425 for (int i
= 0; i
< implied_mrf_writes(inst
); i
++) {
3426 last_mrf_move
[inst
->base_mrf
+ i
] = NULL
;
3430 /* Clear out any MRF move records whose sources got overwritten. */
3431 for (unsigned i
= 0; i
< ARRAY_SIZE(last_mrf_move
); i
++) {
3432 if (last_mrf_move
[i
] &&
3433 regions_overlap(inst
->dst
, inst
->size_written
,
3434 last_mrf_move
[i
]->src
[0],
3435 last_mrf_move
[i
]->size_read(0))) {
3436 last_mrf_move
[i
] = NULL
;
3440 if (inst
->opcode
== BRW_OPCODE_MOV
&&
3441 inst
->dst
.file
== MRF
&&
3442 inst
->src
[0].file
!= ARF
&&
3443 !inst
->is_partial_write()) {
3444 last_mrf_move
[inst
->dst
.nr
] = inst
;
3449 invalidate_live_intervals();
3455 * Rounding modes for conversion instructions are included for each
3456 * conversion, but right now it is a state. So once it is set,
3457 * we don't need to call it again for subsequent calls.
3459 * This is useful for vector/matrices conversions, as setting the
3460 * mode once is enough for the full vector/matrix
3463 fs_visitor::remove_extra_rounding_modes()
3465 bool progress
= false;
3467 foreach_block (block
, cfg
) {
3468 brw_rnd_mode prev_mode
= BRW_RND_MODE_UNSPECIFIED
;
3470 foreach_inst_in_block_safe (fs_inst
, inst
, block
) {
3471 if (inst
->opcode
== SHADER_OPCODE_RND_MODE
) {
3472 assert(inst
->src
[0].file
== BRW_IMMEDIATE_VALUE
);
3473 const brw_rnd_mode mode
= (brw_rnd_mode
) inst
->src
[0].d
;
3474 if (mode
== prev_mode
) {
3475 inst
->remove(block
);
3485 invalidate_live_intervals();
3491 clear_deps_for_inst_src(fs_inst
*inst
, bool *deps
, int first_grf
, int grf_len
)
3493 /* Clear the flag for registers that actually got read (as expected). */
3494 for (int i
= 0; i
< inst
->sources
; i
++) {
3496 if (inst
->src
[i
].file
== VGRF
|| inst
->src
[i
].file
== FIXED_GRF
) {
3497 grf
= inst
->src
[i
].nr
;
3502 if (grf
>= first_grf
&&
3503 grf
< first_grf
+ grf_len
) {
3504 deps
[grf
- first_grf
] = false;
3505 if (inst
->exec_size
== 16)
3506 deps
[grf
- first_grf
+ 1] = false;
3512 * Implements this workaround for the original 965:
3514 * "[DevBW, DevCL] Implementation Restrictions: As the hardware does not
3515 * check for post destination dependencies on this instruction, software
3516 * must ensure that there is no destination hazard for the case of ‘write
3517 * followed by a posted write’ shown in the following example.
3520 * 2. send r3.xy <rest of send instruction>
3523 * Due to no post-destination dependency check on the ‘send’, the above
3524 * code sequence could have two instructions (1 and 2) in flight at the
3525 * same time that both consider ‘r3’ as the target of their final writes.
3528 fs_visitor::insert_gen4_pre_send_dependency_workarounds(bblock_t
*block
,
3531 int write_len
= regs_written(inst
);
3532 int first_write_grf
= inst
->dst
.nr
;
3533 bool needs_dep
[BRW_MAX_MRF(devinfo
->gen
)];
3534 assert(write_len
< (int)sizeof(needs_dep
) - 1);
3536 memset(needs_dep
, false, sizeof(needs_dep
));
3537 memset(needs_dep
, true, write_len
);
3539 clear_deps_for_inst_src(inst
, needs_dep
, first_write_grf
, write_len
);
3541 /* Walk backwards looking for writes to registers we're writing which
3542 * aren't read since being written. If we hit the start of the program,
3543 * we assume that there are no outstanding dependencies on entry to the
3546 foreach_inst_in_block_reverse_starting_from(fs_inst
, scan_inst
, inst
) {
3547 /* If we hit control flow, assume that there *are* outstanding
3548 * dependencies, and force their cleanup before our instruction.
3550 if (block
->start() == scan_inst
&& block
->num
!= 0) {
3551 for (int i
= 0; i
< write_len
; i
++) {
3553 DEP_RESOLVE_MOV(fs_builder(this, block
, inst
),
3554 first_write_grf
+ i
);
3559 /* We insert our reads as late as possible on the assumption that any
3560 * instruction but a MOV that might have left us an outstanding
3561 * dependency has more latency than a MOV.
3563 if (scan_inst
->dst
.file
== VGRF
) {
3564 for (unsigned i
= 0; i
< regs_written(scan_inst
); i
++) {
3565 int reg
= scan_inst
->dst
.nr
+ i
;
3567 if (reg
>= first_write_grf
&&
3568 reg
< first_write_grf
+ write_len
&&
3569 needs_dep
[reg
- first_write_grf
]) {
3570 DEP_RESOLVE_MOV(fs_builder(this, block
, inst
), reg
);
3571 needs_dep
[reg
- first_write_grf
] = false;
3572 if (scan_inst
->exec_size
== 16)
3573 needs_dep
[reg
- first_write_grf
+ 1] = false;
3578 /* Clear the flag for registers that actually got read (as expected). */
3579 clear_deps_for_inst_src(scan_inst
, needs_dep
, first_write_grf
, write_len
);
3581 /* Continue the loop only if we haven't resolved all the dependencies */
3583 for (i
= 0; i
< write_len
; i
++) {
3593 * Implements this workaround for the original 965:
3595 * "[DevBW, DevCL] Errata: A destination register from a send can not be
3596 * used as a destination register until after it has been sourced by an
3597 * instruction with a different destination register.
3600 fs_visitor::insert_gen4_post_send_dependency_workarounds(bblock_t
*block
, fs_inst
*inst
)
3602 int write_len
= regs_written(inst
);
3603 unsigned first_write_grf
= inst
->dst
.nr
;
3604 bool needs_dep
[BRW_MAX_MRF(devinfo
->gen
)];
3605 assert(write_len
< (int)sizeof(needs_dep
) - 1);
3607 memset(needs_dep
, false, sizeof(needs_dep
));
3608 memset(needs_dep
, true, write_len
);
3609 /* Walk forwards looking for writes to registers we're writing which aren't
3610 * read before being written.
3612 foreach_inst_in_block_starting_from(fs_inst
, scan_inst
, inst
) {
3613 /* If we hit control flow, force resolve all remaining dependencies. */
3614 if (block
->end() == scan_inst
&& block
->num
!= cfg
->num_blocks
- 1) {
3615 for (int i
= 0; i
< write_len
; i
++) {
3617 DEP_RESOLVE_MOV(fs_builder(this, block
, scan_inst
),
3618 first_write_grf
+ i
);
3623 /* Clear the flag for registers that actually got read (as expected). */
3624 clear_deps_for_inst_src(scan_inst
, needs_dep
, first_write_grf
, write_len
);
3626 /* We insert our reads as late as possible since they're reading the
3627 * result of a SEND, which has massive latency.
3629 if (scan_inst
->dst
.file
== VGRF
&&
3630 scan_inst
->dst
.nr
>= first_write_grf
&&
3631 scan_inst
->dst
.nr
< first_write_grf
+ write_len
&&
3632 needs_dep
[scan_inst
->dst
.nr
- first_write_grf
]) {
3633 DEP_RESOLVE_MOV(fs_builder(this, block
, scan_inst
),
3635 needs_dep
[scan_inst
->dst
.nr
- first_write_grf
] = false;
3638 /* Continue the loop only if we haven't resolved all the dependencies */
3640 for (i
= 0; i
< write_len
; i
++) {
3650 fs_visitor::insert_gen4_send_dependency_workarounds()
3652 if (devinfo
->gen
!= 4 || devinfo
->is_g4x
)
3655 bool progress
= false;
3657 foreach_block_and_inst(block
, fs_inst
, inst
, cfg
) {
3658 if (inst
->mlen
!= 0 && inst
->dst
.file
== VGRF
) {
3659 insert_gen4_pre_send_dependency_workarounds(block
, inst
);
3660 insert_gen4_post_send_dependency_workarounds(block
, inst
);
3666 invalidate_live_intervals();
3670 * Turns the generic expression-style uniform pull constant load instruction
3671 * into a hardware-specific series of instructions for loading a pull
3674 * The expression style allows the CSE pass before this to optimize out
3675 * repeated loads from the same offset, and gives the pre-register-allocation
3676 * scheduling full flexibility, while the conversion to native instructions
3677 * allows the post-register-allocation scheduler the best information
3680 * Note that execution masking for setting up pull constant loads is special:
3681 * the channels that need to be written are unrelated to the current execution
3682 * mask, since a later instruction will use one of the result channels as a
3683 * source operand for all 8 or 16 of its channels.
3686 fs_visitor::lower_uniform_pull_constant_loads()
3688 foreach_block_and_inst (block
, fs_inst
, inst
, cfg
) {
3689 if (inst
->opcode
!= FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD
)
3692 if (devinfo
->gen
>= 7) {
3693 const fs_builder ubld
= fs_builder(this, block
, inst
).exec_all();
3694 const fs_reg payload
= ubld
.group(8, 0).vgrf(BRW_REGISTER_TYPE_UD
);
3696 ubld
.group(8, 0).MOV(payload
,
3697 retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD
));
3698 ubld
.group(1, 0).MOV(component(payload
, 2),
3699 brw_imm_ud(inst
->src
[1].ud
/ 16));
3701 inst
->opcode
= FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD_GEN7
;
3702 inst
->src
[1] = payload
;
3703 inst
->header_size
= 1;
3706 invalidate_live_intervals();
3708 /* Before register allocation, we didn't tell the scheduler about the
3709 * MRF we use. We know it's safe to use this MRF because nothing
3710 * else does except for register spill/unspill, which generates and
3711 * uses its MRF within a single IR instruction.
3713 inst
->base_mrf
= FIRST_PULL_LOAD_MRF(devinfo
->gen
) + 1;
3720 fs_visitor::lower_load_payload()
3722 bool progress
= false;
3724 foreach_block_and_inst_safe (block
, fs_inst
, inst
, cfg
) {
3725 if (inst
->opcode
!= SHADER_OPCODE_LOAD_PAYLOAD
)
3728 assert(inst
->dst
.file
== MRF
|| inst
->dst
.file
== VGRF
);
3729 assert(inst
->saturate
== false);
3730 fs_reg dst
= inst
->dst
;
3732 /* Get rid of COMPR4. We'll add it back in if we need it */
3733 if (dst
.file
== MRF
)
3734 dst
.nr
= dst
.nr
& ~BRW_MRF_COMPR4
;
3736 const fs_builder
ibld(this, block
, inst
);
3737 const fs_builder hbld
= ibld
.exec_all().group(8, 0);
3739 for (uint8_t i
= 0; i
< inst
->header_size
; i
++) {
3740 if (inst
->src
[i
].file
!= BAD_FILE
) {
3741 fs_reg mov_dst
= retype(dst
, BRW_REGISTER_TYPE_UD
);
3742 fs_reg mov_src
= retype(inst
->src
[i
], BRW_REGISTER_TYPE_UD
);
3743 hbld
.MOV(mov_dst
, mov_src
);
3745 dst
= offset(dst
, hbld
, 1);
3748 if (inst
->dst
.file
== MRF
&& (inst
->dst
.nr
& BRW_MRF_COMPR4
) &&
3749 inst
->exec_size
> 8) {
3750 /* In this case, the payload portion of the LOAD_PAYLOAD isn't
3751 * a straightforward copy. Instead, the result of the
3752 * LOAD_PAYLOAD is treated as interleaved and the first four
3753 * non-header sources are unpacked as:
3764 * This is used for gen <= 5 fb writes.
3766 assert(inst
->exec_size
== 16);
3767 assert(inst
->header_size
+ 4 <= inst
->sources
);
3768 for (uint8_t i
= inst
->header_size
; i
< inst
->header_size
+ 4; i
++) {
3769 if (inst
->src
[i
].file
!= BAD_FILE
) {
3770 if (devinfo
->has_compr4
) {
3771 fs_reg compr4_dst
= retype(dst
, inst
->src
[i
].type
);
3772 compr4_dst
.nr
|= BRW_MRF_COMPR4
;
3773 ibld
.MOV(compr4_dst
, inst
->src
[i
]);
3775 /* Platform doesn't have COMPR4. We have to fake it */
3776 fs_reg mov_dst
= retype(dst
, inst
->src
[i
].type
);
3777 ibld
.half(0).MOV(mov_dst
, half(inst
->src
[i
], 0));
3779 ibld
.half(1).MOV(mov_dst
, half(inst
->src
[i
], 1));
3786 /* The loop above only ever incremented us through the first set
3787 * of 4 registers. However, thanks to the magic of COMPR4, we
3788 * actually wrote to the first 8 registers, so we need to take
3789 * that into account now.
3793 /* The COMPR4 code took care of the first 4 sources. We'll let
3794 * the regular path handle any remaining sources. Yes, we are
3795 * modifying the instruction but we're about to delete it so
3796 * this really doesn't hurt anything.
3798 inst
->header_size
+= 4;
3801 for (uint8_t i
= inst
->header_size
; i
< inst
->sources
; i
++) {
3802 if (inst
->src
[i
].file
!= BAD_FILE
)
3803 ibld
.MOV(retype(dst
, inst
->src
[i
].type
), inst
->src
[i
]);
3804 dst
= offset(dst
, ibld
, 1);
3807 inst
->remove(block
);
3812 invalidate_live_intervals();
3818 fs_visitor::lower_integer_multiplication()
3820 bool progress
= false;
3822 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
3823 const fs_builder
ibld(this, block
, inst
);
3825 if (inst
->opcode
== BRW_OPCODE_MUL
) {
3826 if (inst
->dst
.is_accumulator() ||
3827 (inst
->dst
.type
!= BRW_REGISTER_TYPE_D
&&
3828 inst
->dst
.type
!= BRW_REGISTER_TYPE_UD
))
3831 if (devinfo
->has_integer_dword_mul
)
3834 if (inst
->src
[1].file
== IMM
&&
3835 inst
->src
[1].ud
< (1 << 16)) {
3836 /* The MUL instruction isn't commutative. On Gen <= 6, only the low
3837 * 16-bits of src0 are read, and on Gen >= 7 only the low 16-bits of
3840 * If multiplying by an immediate value that fits in 16-bits, do a
3841 * single MUL instruction with that value in the proper location.
3843 if (devinfo
->gen
< 7) {
3844 fs_reg
imm(VGRF
, alloc
.allocate(dispatch_width
/ 8),
3846 ibld
.MOV(imm
, inst
->src
[1]);
3847 ibld
.MUL(inst
->dst
, imm
, inst
->src
[0]);
3849 const bool ud
= (inst
->src
[1].type
== BRW_REGISTER_TYPE_UD
);
3850 ibld
.MUL(inst
->dst
, inst
->src
[0],
3851 ud
? brw_imm_uw(inst
->src
[1].ud
)
3852 : brw_imm_w(inst
->src
[1].d
));
3855 /* Gen < 8 (and some Gen8+ low-power parts like Cherryview) cannot
3856 * do 32-bit integer multiplication in one instruction, but instead
3857 * must do a sequence (which actually calculates a 64-bit result):
3859 * mul(8) acc0<1>D g3<8,8,1>D g4<8,8,1>D
3860 * mach(8) null g3<8,8,1>D g4<8,8,1>D
3861 * mov(8) g2<1>D acc0<8,8,1>D
3863 * But on Gen > 6, the ability to use second accumulator register
3864 * (acc1) for non-float data types was removed, preventing a simple
3865 * implementation in SIMD16. A 16-channel result can be calculated by
3866 * executing the three instructions twice in SIMD8, once with quarter
3867 * control of 1Q for the first eight channels and again with 2Q for
3868 * the second eight channels.
3870 * Which accumulator register is implicitly accessed (by AccWrEnable
3871 * for instance) is determined by the quarter control. Unfortunately
3872 * Ivybridge (and presumably Baytrail) has a hardware bug in which an
3873 * implicit accumulator access by an instruction with 2Q will access
3874 * acc1 regardless of whether the data type is usable in acc1.
3876 * Specifically, the 2Q mach(8) writes acc1 which does not exist for
3877 * integer data types.
3879 * Since we only want the low 32-bits of the result, we can do two
3880 * 32-bit x 16-bit multiplies (like the mul and mach are doing), and
3881 * adjust the high result and add them (like the mach is doing):
3883 * mul(8) g7<1>D g3<8,8,1>D g4.0<8,8,1>UW
3884 * mul(8) g8<1>D g3<8,8,1>D g4.1<8,8,1>UW
3885 * shl(8) g9<1>D g8<8,8,1>D 16D
3886 * add(8) g2<1>D g7<8,8,1>D g8<8,8,1>D
3888 * We avoid the shl instruction by realizing that we only want to add
3889 * the low 16-bits of the "high" result to the high 16-bits of the
3890 * "low" result and using proper regioning on the add:
3892 * mul(8) g7<1>D g3<8,8,1>D g4.0<16,8,2>UW
3893 * mul(8) g8<1>D g3<8,8,1>D g4.1<16,8,2>UW
3894 * add(8) g7.1<2>UW g7.1<16,8,2>UW g8<16,8,2>UW
3896 * Since it does not use the (single) accumulator register, we can
3897 * schedule multi-component multiplications much better.
3900 bool needs_mov
= false;
3901 fs_reg orig_dst
= inst
->dst
;
3902 fs_reg low
= inst
->dst
;
3903 if (orig_dst
.is_null() || orig_dst
.file
== MRF
||
3904 regions_overlap(inst
->dst
, inst
->size_written
,
3905 inst
->src
[0], inst
->size_read(0)) ||
3906 regions_overlap(inst
->dst
, inst
->size_written
,
3907 inst
->src
[1], inst
->size_read(1))) {
3909 /* Get a new VGRF but keep the same stride as inst->dst */
3910 low
= fs_reg(VGRF
, alloc
.allocate(regs_written(inst
)),
3912 low
.stride
= inst
->dst
.stride
;
3913 low
.offset
= inst
->dst
.offset
% REG_SIZE
;
3916 /* Get a new VGRF but keep the same stride as inst->dst */
3917 fs_reg
high(VGRF
, alloc
.allocate(regs_written(inst
)),
3919 high
.stride
= inst
->dst
.stride
;
3920 high
.offset
= inst
->dst
.offset
% REG_SIZE
;
3922 if (devinfo
->gen
>= 7) {
3923 if (inst
->src
[1].abs
)
3924 lower_src_modifiers(this, block
, inst
, 1);
3926 if (inst
->src
[1].file
== IMM
) {
3927 ibld
.MUL(low
, inst
->src
[0],
3928 brw_imm_uw(inst
->src
[1].ud
& 0xffff));
3929 ibld
.MUL(high
, inst
->src
[0],
3930 brw_imm_uw(inst
->src
[1].ud
>> 16));
3932 ibld
.MUL(low
, inst
->src
[0],
3933 subscript(inst
->src
[1], BRW_REGISTER_TYPE_UW
, 0));
3934 ibld
.MUL(high
, inst
->src
[0],
3935 subscript(inst
->src
[1], BRW_REGISTER_TYPE_UW
, 1));
3938 if (inst
->src
[0].abs
)
3939 lower_src_modifiers(this, block
, inst
, 0);
3941 ibld
.MUL(low
, subscript(inst
->src
[0], BRW_REGISTER_TYPE_UW
, 0),
3943 ibld
.MUL(high
, subscript(inst
->src
[0], BRW_REGISTER_TYPE_UW
, 1),
3947 ibld
.ADD(subscript(low
, BRW_REGISTER_TYPE_UW
, 1),
3948 subscript(low
, BRW_REGISTER_TYPE_UW
, 1),
3949 subscript(high
, BRW_REGISTER_TYPE_UW
, 0));
3951 if (needs_mov
|| inst
->conditional_mod
) {
3952 set_condmod(inst
->conditional_mod
,
3953 ibld
.MOV(orig_dst
, low
));
3957 } else if (inst
->opcode
== SHADER_OPCODE_MULH
) {
3958 /* According to the BDW+ BSpec page for the "Multiply Accumulate
3959 * High" instruction:
3961 * "An added preliminary mov is required for source modification on
3963 * mov (8) r3.0<1>:d -r3<8;8,1>:d
3964 * mul (8) acc0:d r2.0<8;8,1>:d r3.0<16;8,2>:uw
3965 * mach (8) r5.0<1>:d r2.0<8;8,1>:d r3.0<8;8,1>:d"
3967 if (devinfo
->gen
>= 8 && (inst
->src
[1].negate
|| inst
->src
[1].abs
))
3968 lower_src_modifiers(this, block
, inst
, 1);
3970 /* Should have been lowered to 8-wide. */
3971 assert(inst
->exec_size
<= get_lowered_simd_width(devinfo
, inst
));
3972 const fs_reg acc
= retype(brw_acc_reg(inst
->exec_size
),
3974 fs_inst
*mul
= ibld
.MUL(acc
, inst
->src
[0], inst
->src
[1]);
3975 fs_inst
*mach
= ibld
.MACH(inst
->dst
, inst
->src
[0], inst
->src
[1]);
3977 if (devinfo
->gen
>= 8) {
3978 /* Until Gen8, integer multiplies read 32-bits from one source,
3979 * and 16-bits from the other, and relying on the MACH instruction
3980 * to generate the high bits of the result.
3982 * On Gen8, the multiply instruction does a full 32x32-bit
3983 * multiply, but in order to do a 64-bit multiply we can simulate
3984 * the previous behavior and then use a MACH instruction.
3986 assert(mul
->src
[1].type
== BRW_REGISTER_TYPE_D
||
3987 mul
->src
[1].type
== BRW_REGISTER_TYPE_UD
);
3988 mul
->src
[1].type
= BRW_REGISTER_TYPE_UW
;
3989 mul
->src
[1].stride
*= 2;
3991 } else if (devinfo
->gen
== 7 && !devinfo
->is_haswell
&&
3993 /* Among other things the quarter control bits influence which
3994 * accumulator register is used by the hardware for instructions
3995 * that access the accumulator implicitly (e.g. MACH). A
3996 * second-half instruction would normally map to acc1, which
3997 * doesn't exist on Gen7 and up (the hardware does emulate it for
3998 * floating-point instructions *only* by taking advantage of the
3999 * extra precision of acc0 not normally used for floating point
4002 * HSW and up are careful enough not to try to access an
4003 * accumulator register that doesn't exist, but on earlier Gen7
4004 * hardware we need to make sure that the quarter control bits are
4005 * zero to avoid non-deterministic behaviour and emit an extra MOV
4006 * to get the result masked correctly according to the current
4010 mach
->force_writemask_all
= true;
4011 mach
->dst
= ibld
.vgrf(inst
->dst
.type
);
4012 ibld
.MOV(inst
->dst
, mach
->dst
);
4018 inst
->remove(block
);
4023 invalidate_live_intervals();
4029 fs_visitor::lower_minmax()
4031 assert(devinfo
->gen
< 6);
4033 bool progress
= false;
4035 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
4036 const fs_builder
ibld(this, block
, inst
);
4038 if (inst
->opcode
== BRW_OPCODE_SEL
&&
4039 inst
->predicate
== BRW_PREDICATE_NONE
) {
4040 /* FIXME: Using CMP doesn't preserve the NaN propagation semantics of
4041 * the original SEL.L/GE instruction
4043 ibld
.CMP(ibld
.null_reg_d(), inst
->src
[0], inst
->src
[1],
4044 inst
->conditional_mod
);
4045 inst
->predicate
= BRW_PREDICATE_NORMAL
;
4046 inst
->conditional_mod
= BRW_CONDITIONAL_NONE
;
4053 invalidate_live_intervals();
4059 setup_color_payload(const fs_builder
&bld
, const brw_wm_prog_key
*key
,
4060 fs_reg
*dst
, fs_reg color
, unsigned components
)
4062 if (key
->clamp_fragment_color
) {
4063 fs_reg tmp
= bld
.vgrf(BRW_REGISTER_TYPE_F
, 4);
4064 assert(color
.type
== BRW_REGISTER_TYPE_F
);
4066 for (unsigned i
= 0; i
< components
; i
++)
4068 bld
.MOV(offset(tmp
, bld
, i
), offset(color
, bld
, i
)));
4073 for (unsigned i
= 0; i
< components
; i
++)
4074 dst
[i
] = offset(color
, bld
, i
);
4078 lower_fb_write_logical_send(const fs_builder
&bld
, fs_inst
*inst
,
4079 const struct brw_wm_prog_data
*prog_data
,
4080 const brw_wm_prog_key
*key
,
4081 const fs_visitor::thread_payload
&payload
)
4083 assert(inst
->src
[FB_WRITE_LOGICAL_SRC_COMPONENTS
].file
== IMM
);
4084 const gen_device_info
*devinfo
= bld
.shader
->devinfo
;
4085 const fs_reg
&color0
= inst
->src
[FB_WRITE_LOGICAL_SRC_COLOR0
];
4086 const fs_reg
&color1
= inst
->src
[FB_WRITE_LOGICAL_SRC_COLOR1
];
4087 const fs_reg
&src0_alpha
= inst
->src
[FB_WRITE_LOGICAL_SRC_SRC0_ALPHA
];
4088 const fs_reg
&src_depth
= inst
->src
[FB_WRITE_LOGICAL_SRC_SRC_DEPTH
];
4089 const fs_reg
&dst_depth
= inst
->src
[FB_WRITE_LOGICAL_SRC_DST_DEPTH
];
4090 const fs_reg
&src_stencil
= inst
->src
[FB_WRITE_LOGICAL_SRC_SRC_STENCIL
];
4091 fs_reg sample_mask
= inst
->src
[FB_WRITE_LOGICAL_SRC_OMASK
];
4092 const unsigned components
=
4093 inst
->src
[FB_WRITE_LOGICAL_SRC_COMPONENTS
].ud
;
4095 /* We can potentially have a message length of up to 15, so we have to set
4096 * base_mrf to either 0 or 1 in order to fit in m0..m15.
4099 int header_size
= 2, payload_header_size
;
4100 unsigned length
= 0;
4102 if (devinfo
->gen
< 6) {
4103 /* TODO: Support SIMD32 on gen4-5 */
4104 assert(bld
.group() < 16);
4106 /* For gen4-5, we always have a header consisting of g0 and g1. We have
4107 * an implied MOV from g0,g1 to the start of the message. The MOV from
4108 * g0 is handled by the hardware and the MOV from g1 is provided by the
4109 * generator. This is required because, on gen4-5, the generator may
4110 * generate two write messages with different message lengths in order
4111 * to handle AA data properly.
4113 * Also, since the pixel mask goes in the g0 portion of the message and
4114 * since render target writes are the last thing in the shader, we write
4115 * the pixel mask directly into g0 and it will get copied as part of the
4118 if (prog_data
->uses_kill
) {
4119 bld
.exec_all().group(1, 0)
4120 .MOV(retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UW
),
4121 brw_flag_reg(0, 1));
4124 assert(length
== 0);
4126 } else if ((devinfo
->gen
<= 7 && !devinfo
->is_haswell
&&
4127 prog_data
->uses_kill
) ||
4128 color1
.file
!= BAD_FILE
||
4129 key
->nr_color_regions
> 1) {
4130 /* From the Sandy Bridge PRM, volume 4, page 198:
4132 * "Dispatched Pixel Enables. One bit per pixel indicating
4133 * which pixels were originally enabled when the thread was
4134 * dispatched. This field is only required for the end-of-
4135 * thread message and on all dual-source messages."
4137 const fs_builder ubld
= bld
.exec_all().group(8, 0);
4139 fs_reg header
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
, 2);
4140 if (bld
.group() < 16) {
4141 /* The header starts off as g0 and g1 for the first half */
4142 ubld
.group(16, 0).MOV(header
, retype(brw_vec8_grf(0, 0),
4143 BRW_REGISTER_TYPE_UD
));
4145 /* The header starts off as g0 and g2 for the second half */
4146 assert(bld
.group() < 32);
4147 const fs_reg header_sources
[2] = {
4148 retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD
),
4149 retype(brw_vec8_grf(2, 0), BRW_REGISTER_TYPE_UD
),
4151 ubld
.LOAD_PAYLOAD(header
, header_sources
, 2, 0);
4154 uint32_t g00_bits
= 0;
4156 /* Set "Source0 Alpha Present to RenderTarget" bit in message
4159 if (inst
->target
> 0 && key
->replicate_alpha
)
4160 g00_bits
|= 1 << 11;
4162 /* Set computes stencil to render target */
4163 if (prog_data
->computed_stencil
)
4164 g00_bits
|= 1 << 14;
4167 /* OR extra bits into g0.0 */
4168 ubld
.group(1, 0).OR(component(header
, 0),
4169 retype(brw_vec1_grf(0, 0),
4170 BRW_REGISTER_TYPE_UD
),
4171 brw_imm_ud(g00_bits
));
4174 /* Set the render target index for choosing BLEND_STATE. */
4175 if (inst
->target
> 0) {
4176 ubld
.group(1, 0).MOV(component(header
, 2), brw_imm_ud(inst
->target
));
4179 if (prog_data
->uses_kill
) {
4180 assert(bld
.group() < 16);
4181 ubld
.group(1, 0).MOV(retype(component(header
, 15),
4182 BRW_REGISTER_TYPE_UW
),
4183 brw_flag_reg(0, 1));
4186 assert(length
== 0);
4187 sources
[0] = header
;
4188 sources
[1] = horiz_offset(header
, 8);
4191 assert(length
== 0 || length
== 2);
4192 header_size
= length
;
4194 if (payload
.aa_dest_stencil_reg
[0]) {
4195 assert(inst
->group
< 16);
4196 sources
[length
] = fs_reg(VGRF
, bld
.shader
->alloc
.allocate(1));
4197 bld
.group(8, 0).exec_all().annotate("FB write stencil/AA alpha")
4198 .MOV(sources
[length
],
4199 fs_reg(brw_vec8_grf(payload
.aa_dest_stencil_reg
[0], 0)));
4203 if (sample_mask
.file
!= BAD_FILE
) {
4204 sources
[length
] = fs_reg(VGRF
, bld
.shader
->alloc
.allocate(1),
4205 BRW_REGISTER_TYPE_UD
);
4207 /* Hand over gl_SampleMask. Only the lower 16 bits of each channel are
4208 * relevant. Since it's unsigned single words one vgrf is always
4209 * 16-wide, but only the lower or higher 8 channels will be used by the
4210 * hardware when doing a SIMD8 write depending on whether we have
4211 * selected the subspans for the first or second half respectively.
4213 assert(sample_mask
.file
!= BAD_FILE
&& type_sz(sample_mask
.type
) == 4);
4214 sample_mask
.type
= BRW_REGISTER_TYPE_UW
;
4215 sample_mask
.stride
*= 2;
4217 bld
.exec_all().annotate("FB write oMask")
4218 .MOV(horiz_offset(retype(sources
[length
], BRW_REGISTER_TYPE_UW
),
4224 payload_header_size
= length
;
4226 if (src0_alpha
.file
!= BAD_FILE
) {
4227 /* FIXME: This is being passed at the wrong location in the payload and
4228 * doesn't work when gl_SampleMask and MRTs are used simultaneously.
4229 * It's supposed to be immediately before oMask but there seems to be no
4230 * reasonable way to pass them in the correct order because LOAD_PAYLOAD
4231 * requires header sources to form a contiguous segment at the beginning
4232 * of the message and src0_alpha has per-channel semantics.
4234 setup_color_payload(bld
, key
, &sources
[length
], src0_alpha
, 1);
4236 } else if (key
->replicate_alpha
&& inst
->target
!= 0) {
4237 /* Handle the case when fragment shader doesn't write to draw buffer
4238 * zero. No need to call setup_color_payload() for src0_alpha because
4239 * alpha value will be undefined.
4244 setup_color_payload(bld
, key
, &sources
[length
], color0
, components
);
4247 if (color1
.file
!= BAD_FILE
) {
4248 setup_color_payload(bld
, key
, &sources
[length
], color1
, components
);
4252 if (src_depth
.file
!= BAD_FILE
) {
4253 sources
[length
] = src_depth
;
4257 if (dst_depth
.file
!= BAD_FILE
) {
4258 sources
[length
] = dst_depth
;
4262 if (src_stencil
.file
!= BAD_FILE
) {
4263 assert(devinfo
->gen
>= 9);
4264 assert(bld
.dispatch_width() == 8);
4266 /* XXX: src_stencil is only available on gen9+. dst_depth is never
4267 * available on gen9+. As such it's impossible to have both enabled at the
4268 * same time and therefore length cannot overrun the array.
4270 assert(length
< 15);
4272 sources
[length
] = bld
.vgrf(BRW_REGISTER_TYPE_UD
);
4273 bld
.exec_all().annotate("FB write OS")
4274 .MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UB
),
4275 subscript(src_stencil
, BRW_REGISTER_TYPE_UB
, 0));
4280 if (devinfo
->gen
>= 7) {
4281 /* Send from the GRF */
4282 fs_reg payload
= fs_reg(VGRF
, -1, BRW_REGISTER_TYPE_F
);
4283 load
= bld
.LOAD_PAYLOAD(payload
, sources
, length
, payload_header_size
);
4284 payload
.nr
= bld
.shader
->alloc
.allocate(regs_written(load
));
4285 load
->dst
= payload
;
4287 inst
->src
[0] = payload
;
4288 inst
->resize_sources(1);
4290 /* Send from the MRF */
4291 load
= bld
.LOAD_PAYLOAD(fs_reg(MRF
, 1, BRW_REGISTER_TYPE_F
),
4292 sources
, length
, payload_header_size
);
4294 /* On pre-SNB, we have to interlace the color values. LOAD_PAYLOAD
4295 * will do this for us if we just give it a COMPR4 destination.
4297 if (devinfo
->gen
< 6 && bld
.dispatch_width() == 16)
4298 load
->dst
.nr
|= BRW_MRF_COMPR4
;
4300 if (devinfo
->gen
< 6) {
4301 /* Set up src[0] for the implied MOV from grf0-1 */
4302 inst
->resize_sources(1);
4303 inst
->src
[0] = brw_vec8_grf(0, 0);
4305 inst
->resize_sources(0);
4310 inst
->opcode
= FS_OPCODE_FB_WRITE
;
4311 inst
->mlen
= regs_written(load
);
4312 inst
->header_size
= header_size
;
4316 lower_fb_read_logical_send(const fs_builder
&bld
, fs_inst
*inst
)
4318 const fs_builder
&ubld
= bld
.exec_all().group(8, 0);
4319 const unsigned length
= 2;
4320 const fs_reg header
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
, length
);
4322 if (bld
.group() < 16) {
4323 ubld
.group(16, 0).MOV(header
, retype(brw_vec8_grf(0, 0),
4324 BRW_REGISTER_TYPE_UD
));
4326 assert(bld
.group() < 32);
4327 const fs_reg header_sources
[] = {
4328 retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD
),
4329 retype(brw_vec8_grf(2, 0), BRW_REGISTER_TYPE_UD
)
4331 ubld
.LOAD_PAYLOAD(header
, header_sources
, ARRAY_SIZE(header_sources
), 0);
4334 inst
->resize_sources(1);
4335 inst
->src
[0] = header
;
4336 inst
->opcode
= FS_OPCODE_FB_READ
;
4337 inst
->mlen
= length
;
4338 inst
->header_size
= length
;
4342 lower_sampler_logical_send_gen4(const fs_builder
&bld
, fs_inst
*inst
, opcode op
,
4343 const fs_reg
&coordinate
,
4344 const fs_reg
&shadow_c
,
4345 const fs_reg
&lod
, const fs_reg
&lod2
,
4346 const fs_reg
&surface
,
4347 const fs_reg
&sampler
,
4348 unsigned coord_components
,
4349 unsigned grad_components
)
4351 const bool has_lod
= (op
== SHADER_OPCODE_TXL
|| op
== FS_OPCODE_TXB
||
4352 op
== SHADER_OPCODE_TXF
|| op
== SHADER_OPCODE_TXS
);
4353 fs_reg
msg_begin(MRF
, 1, BRW_REGISTER_TYPE_F
);
4354 fs_reg msg_end
= msg_begin
;
4357 msg_end
= offset(msg_end
, bld
.group(8, 0), 1);
4359 for (unsigned i
= 0; i
< coord_components
; i
++)
4360 bld
.MOV(retype(offset(msg_end
, bld
, i
), coordinate
.type
),
4361 offset(coordinate
, bld
, i
));
4363 msg_end
= offset(msg_end
, bld
, coord_components
);
4365 /* Messages other than SAMPLE and RESINFO in SIMD16 and TXD in SIMD8
4366 * require all three components to be present and zero if they are unused.
4368 if (coord_components
> 0 &&
4369 (has_lod
|| shadow_c
.file
!= BAD_FILE
||
4370 (op
== SHADER_OPCODE_TEX
&& bld
.dispatch_width() == 8))) {
4371 for (unsigned i
= coord_components
; i
< 3; i
++)
4372 bld
.MOV(offset(msg_end
, bld
, i
), brw_imm_f(0.0f
));
4374 msg_end
= offset(msg_end
, bld
, 3 - coord_components
);
4377 if (op
== SHADER_OPCODE_TXD
) {
4378 /* TXD unsupported in SIMD16 mode. */
4379 assert(bld
.dispatch_width() == 8);
4381 /* the slots for u and v are always present, but r is optional */
4382 if (coord_components
< 2)
4383 msg_end
= offset(msg_end
, bld
, 2 - coord_components
);
4386 * dPdx = dudx, dvdx, drdx
4387 * dPdy = dudy, dvdy, drdy
4389 * 1-arg: Does not exist.
4391 * 2-arg: dudx dvdx dudy dvdy
4392 * dPdx.x dPdx.y dPdy.x dPdy.y
4395 * 3-arg: dudx dvdx drdx dudy dvdy drdy
4396 * dPdx.x dPdx.y dPdx.z dPdy.x dPdy.y dPdy.z
4397 * m5 m6 m7 m8 m9 m10
4399 for (unsigned i
= 0; i
< grad_components
; i
++)
4400 bld
.MOV(offset(msg_end
, bld
, i
), offset(lod
, bld
, i
));
4402 msg_end
= offset(msg_end
, bld
, MAX2(grad_components
, 2));
4404 for (unsigned i
= 0; i
< grad_components
; i
++)
4405 bld
.MOV(offset(msg_end
, bld
, i
), offset(lod2
, bld
, i
));
4407 msg_end
= offset(msg_end
, bld
, MAX2(grad_components
, 2));
4411 /* Bias/LOD with shadow comparator is unsupported in SIMD16 -- *Without*
4412 * shadow comparator (including RESINFO) it's unsupported in SIMD8 mode.
4414 assert(shadow_c
.file
!= BAD_FILE
? bld
.dispatch_width() == 8 :
4415 bld
.dispatch_width() == 16);
4417 const brw_reg_type type
=
4418 (op
== SHADER_OPCODE_TXF
|| op
== SHADER_OPCODE_TXS
?
4419 BRW_REGISTER_TYPE_UD
: BRW_REGISTER_TYPE_F
);
4420 bld
.MOV(retype(msg_end
, type
), lod
);
4421 msg_end
= offset(msg_end
, bld
, 1);
4424 if (shadow_c
.file
!= BAD_FILE
) {
4425 if (op
== SHADER_OPCODE_TEX
&& bld
.dispatch_width() == 8) {
4426 /* There's no plain shadow compare message, so we use shadow
4427 * compare with a bias of 0.0.
4429 bld
.MOV(msg_end
, brw_imm_f(0.0f
));
4430 msg_end
= offset(msg_end
, bld
, 1);
4433 bld
.MOV(msg_end
, shadow_c
);
4434 msg_end
= offset(msg_end
, bld
, 1);
4438 inst
->src
[0] = reg_undef
;
4439 inst
->src
[1] = surface
;
4440 inst
->src
[2] = sampler
;
4441 inst
->resize_sources(3);
4442 inst
->base_mrf
= msg_begin
.nr
;
4443 inst
->mlen
= msg_end
.nr
- msg_begin
.nr
;
4444 inst
->header_size
= 1;
4448 lower_sampler_logical_send_gen5(const fs_builder
&bld
, fs_inst
*inst
, opcode op
,
4449 const fs_reg
&coordinate
,
4450 const fs_reg
&shadow_c
,
4451 const fs_reg
&lod
, const fs_reg
&lod2
,
4452 const fs_reg
&sample_index
,
4453 const fs_reg
&surface
,
4454 const fs_reg
&sampler
,
4455 unsigned coord_components
,
4456 unsigned grad_components
)
4458 fs_reg
message(MRF
, 2, BRW_REGISTER_TYPE_F
);
4459 fs_reg msg_coords
= message
;
4460 unsigned header_size
= 0;
4462 if (inst
->offset
!= 0) {
4463 /* The offsets set up by the visitor are in the m1 header, so we can't
4470 for (unsigned i
= 0; i
< coord_components
; i
++)
4471 bld
.MOV(retype(offset(msg_coords
, bld
, i
), coordinate
.type
),
4472 offset(coordinate
, bld
, i
));
4474 fs_reg msg_end
= offset(msg_coords
, bld
, coord_components
);
4475 fs_reg msg_lod
= offset(msg_coords
, bld
, 4);
4477 if (shadow_c
.file
!= BAD_FILE
) {
4478 fs_reg msg_shadow
= msg_lod
;
4479 bld
.MOV(msg_shadow
, shadow_c
);
4480 msg_lod
= offset(msg_shadow
, bld
, 1);
4485 case SHADER_OPCODE_TXL
:
4487 bld
.MOV(msg_lod
, lod
);
4488 msg_end
= offset(msg_lod
, bld
, 1);
4490 case SHADER_OPCODE_TXD
:
4493 * dPdx = dudx, dvdx, drdx
4494 * dPdy = dudy, dvdy, drdy
4496 * Load up these values:
4497 * - dudx dudy dvdx dvdy drdx drdy
4498 * - dPdx.x dPdy.x dPdx.y dPdy.y dPdx.z dPdy.z
4501 for (unsigned i
= 0; i
< grad_components
; i
++) {
4502 bld
.MOV(msg_end
, offset(lod
, bld
, i
));
4503 msg_end
= offset(msg_end
, bld
, 1);
4505 bld
.MOV(msg_end
, offset(lod2
, bld
, i
));
4506 msg_end
= offset(msg_end
, bld
, 1);
4509 case SHADER_OPCODE_TXS
:
4510 msg_lod
= retype(msg_end
, BRW_REGISTER_TYPE_UD
);
4511 bld
.MOV(msg_lod
, lod
);
4512 msg_end
= offset(msg_lod
, bld
, 1);
4514 case SHADER_OPCODE_TXF
:
4515 msg_lod
= offset(msg_coords
, bld
, 3);
4516 bld
.MOV(retype(msg_lod
, BRW_REGISTER_TYPE_UD
), lod
);
4517 msg_end
= offset(msg_lod
, bld
, 1);
4519 case SHADER_OPCODE_TXF_CMS
:
4520 msg_lod
= offset(msg_coords
, bld
, 3);
4522 bld
.MOV(retype(msg_lod
, BRW_REGISTER_TYPE_UD
), brw_imm_ud(0u));
4524 bld
.MOV(retype(offset(msg_lod
, bld
, 1), BRW_REGISTER_TYPE_UD
), sample_index
);
4525 msg_end
= offset(msg_lod
, bld
, 2);
4532 inst
->src
[0] = reg_undef
;
4533 inst
->src
[1] = surface
;
4534 inst
->src
[2] = sampler
;
4535 inst
->resize_sources(3);
4536 inst
->base_mrf
= message
.nr
;
4537 inst
->mlen
= msg_end
.nr
- message
.nr
;
4538 inst
->header_size
= header_size
;
4540 /* Message length > MAX_SAMPLER_MESSAGE_SIZE disallowed by hardware. */
4541 assert(inst
->mlen
<= MAX_SAMPLER_MESSAGE_SIZE
);
4545 is_high_sampler(const struct gen_device_info
*devinfo
, const fs_reg
&sampler
)
4547 if (devinfo
->gen
< 8 && !devinfo
->is_haswell
)
4550 return sampler
.file
!= IMM
|| sampler
.ud
>= 16;
4554 sampler_msg_type(const gen_device_info
*devinfo
,
4555 opcode opcode
, bool shadow_compare
)
4557 assert(devinfo
->gen
>= 5);
4559 case SHADER_OPCODE_TEX
:
4560 return shadow_compare
? GEN5_SAMPLER_MESSAGE_SAMPLE_COMPARE
:
4561 GEN5_SAMPLER_MESSAGE_SAMPLE
;
4563 return shadow_compare
? GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS_COMPARE
:
4564 GEN5_SAMPLER_MESSAGE_SAMPLE_BIAS
;
4565 case SHADER_OPCODE_TXL
:
4566 return shadow_compare
? GEN5_SAMPLER_MESSAGE_SAMPLE_LOD_COMPARE
:
4567 GEN5_SAMPLER_MESSAGE_SAMPLE_LOD
;
4568 case SHADER_OPCODE_TXL_LZ
:
4569 return shadow_compare
? GEN9_SAMPLER_MESSAGE_SAMPLE_C_LZ
:
4570 GEN9_SAMPLER_MESSAGE_SAMPLE_LZ
;
4571 case SHADER_OPCODE_TXS
:
4572 case SHADER_OPCODE_IMAGE_SIZE
:
4573 return GEN5_SAMPLER_MESSAGE_SAMPLE_RESINFO
;
4574 case SHADER_OPCODE_TXD
:
4575 assert(!shadow_compare
|| devinfo
->gen
>= 8 || devinfo
->is_haswell
);
4576 return shadow_compare
? HSW_SAMPLER_MESSAGE_SAMPLE_DERIV_COMPARE
:
4577 GEN5_SAMPLER_MESSAGE_SAMPLE_DERIVS
;
4578 case SHADER_OPCODE_TXF
:
4579 return GEN5_SAMPLER_MESSAGE_SAMPLE_LD
;
4580 case SHADER_OPCODE_TXF_LZ
:
4581 assert(devinfo
->gen
>= 9);
4582 return GEN9_SAMPLER_MESSAGE_SAMPLE_LD_LZ
;
4583 case SHADER_OPCODE_TXF_CMS_W
:
4584 assert(devinfo
->gen
>= 9);
4585 return GEN9_SAMPLER_MESSAGE_SAMPLE_LD2DMS_W
;
4586 case SHADER_OPCODE_TXF_CMS
:
4587 return devinfo
->gen
>= 7 ? GEN7_SAMPLER_MESSAGE_SAMPLE_LD2DMS
:
4588 GEN5_SAMPLER_MESSAGE_SAMPLE_LD
;
4589 case SHADER_OPCODE_TXF_UMS
:
4590 assert(devinfo
->gen
>= 7);
4591 return GEN7_SAMPLER_MESSAGE_SAMPLE_LD2DSS
;
4592 case SHADER_OPCODE_TXF_MCS
:
4593 assert(devinfo
->gen
>= 7);
4594 return GEN7_SAMPLER_MESSAGE_SAMPLE_LD_MCS
;
4595 case SHADER_OPCODE_LOD
:
4596 return GEN5_SAMPLER_MESSAGE_LOD
;
4597 case SHADER_OPCODE_TG4
:
4598 assert(devinfo
->gen
>= 7);
4599 return shadow_compare
? GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_C
:
4600 GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4
;
4602 case SHADER_OPCODE_TG4_OFFSET
:
4603 assert(devinfo
->gen
>= 7);
4604 return shadow_compare
? GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO_C
:
4605 GEN7_SAMPLER_MESSAGE_SAMPLE_GATHER4_PO
;
4606 case SHADER_OPCODE_SAMPLEINFO
:
4607 return GEN6_SAMPLER_MESSAGE_SAMPLE_SAMPLEINFO
;
4609 unreachable("not reached");
4614 lower_sampler_logical_send_gen7(const fs_builder
&bld
, fs_inst
*inst
, opcode op
,
4615 const fs_reg
&coordinate
,
4616 const fs_reg
&shadow_c
,
4617 fs_reg lod
, const fs_reg
&lod2
,
4618 const fs_reg
&min_lod
,
4619 const fs_reg
&sample_index
,
4621 const fs_reg
&surface
,
4622 const fs_reg
&sampler
,
4623 const fs_reg
&tg4_offset
,
4624 unsigned coord_components
,
4625 unsigned grad_components
)
4627 const gen_device_info
*devinfo
= bld
.shader
->devinfo
;
4628 const brw_stage_prog_data
*prog_data
= bld
.shader
->stage_prog_data
;
4629 unsigned reg_width
= bld
.dispatch_width() / 8;
4630 unsigned header_size
= 0, length
= 0;
4631 fs_reg sources
[MAX_SAMPLER_MESSAGE_SIZE
];
4632 for (unsigned i
= 0; i
< ARRAY_SIZE(sources
); i
++)
4633 sources
[i
] = bld
.vgrf(BRW_REGISTER_TYPE_F
);
4635 if (op
== SHADER_OPCODE_TG4
|| op
== SHADER_OPCODE_TG4_OFFSET
||
4636 inst
->offset
!= 0 || inst
->eot
||
4637 op
== SHADER_OPCODE_SAMPLEINFO
||
4638 is_high_sampler(devinfo
, sampler
)) {
4639 /* For general texture offsets (no txf workaround), we need a header to
4642 * TG4 needs to place its channel select in the header, for interaction
4643 * with ARB_texture_swizzle. The sampler index is only 4-bits, so for
4644 * larger sampler numbers we need to offset the Sampler State Pointer in
4647 fs_reg header
= retype(sources
[0], BRW_REGISTER_TYPE_UD
);
4651 /* If we're requesting fewer than four channels worth of response,
4652 * and we have an explicit header, we need to set up the sampler
4653 * writemask. It's reversed from normal: 1 means "don't write".
4655 if (!inst
->eot
&& regs_written(inst
) != 4 * reg_width
) {
4656 assert(regs_written(inst
) % reg_width
== 0);
4657 unsigned mask
= ~((1 << (regs_written(inst
) / reg_width
)) - 1) & 0xf;
4658 inst
->offset
|= mask
<< 12;
4661 /* Build the actual header */
4662 const fs_builder ubld
= bld
.exec_all().group(8, 0);
4663 const fs_builder ubld1
= ubld
.group(1, 0);
4664 ubld
.MOV(header
, retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD
));
4666 ubld1
.MOV(component(header
, 2), brw_imm_ud(inst
->offset
));
4667 } else if (bld
.shader
->stage
!= MESA_SHADER_VERTEX
&&
4668 bld
.shader
->stage
!= MESA_SHADER_FRAGMENT
) {
4669 /* The vertex and fragment stages have g0.2 set to 0, so
4670 * header0.2 is 0 when g0 is copied. Other stages may not, so we
4671 * must set it to 0 to avoid setting undesirable bits in the
4674 ubld1
.MOV(component(header
, 2), brw_imm_ud(0));
4677 if (is_high_sampler(devinfo
, sampler
)) {
4678 if (sampler
.file
== BRW_IMMEDIATE_VALUE
) {
4679 assert(sampler
.ud
>= 16);
4680 const int sampler_state_size
= 16; /* 16 bytes */
4682 ubld1
.ADD(component(header
, 3),
4683 retype(brw_vec1_grf(0, 3), BRW_REGISTER_TYPE_UD
),
4684 brw_imm_ud(16 * (sampler
.ud
/ 16) * sampler_state_size
));
4686 fs_reg tmp
= ubld1
.vgrf(BRW_REGISTER_TYPE_UD
);
4687 ubld1
.AND(tmp
, sampler
, brw_imm_ud(0x0f0));
4688 ubld1
.SHL(tmp
, tmp
, brw_imm_ud(4));
4689 ubld1
.ADD(component(header
, 3),
4690 retype(brw_vec1_grf(0, 3), BRW_REGISTER_TYPE_UD
),
4696 if (shadow_c
.file
!= BAD_FILE
) {
4697 bld
.MOV(sources
[length
], shadow_c
);
4701 bool coordinate_done
= false;
4703 /* Set up the LOD info */
4706 case SHADER_OPCODE_TXL
:
4707 if (devinfo
->gen
>= 9 && op
== SHADER_OPCODE_TXL
&& lod
.is_zero()) {
4708 op
= SHADER_OPCODE_TXL_LZ
;
4711 bld
.MOV(sources
[length
], lod
);
4714 case SHADER_OPCODE_TXD
:
4715 /* TXD should have been lowered in SIMD16 mode. */
4716 assert(bld
.dispatch_width() == 8);
4718 /* Load dPdx and the coordinate together:
4719 * [hdr], [ref], x, dPdx.x, dPdy.x, y, dPdx.y, dPdy.y, z, dPdx.z, dPdy.z
4721 for (unsigned i
= 0; i
< coord_components
; i
++) {
4722 bld
.MOV(sources
[length
++], offset(coordinate
, bld
, i
));
4724 /* For cube map array, the coordinate is (u,v,r,ai) but there are
4725 * only derivatives for (u, v, r).
4727 if (i
< grad_components
) {
4728 bld
.MOV(sources
[length
++], offset(lod
, bld
, i
));
4729 bld
.MOV(sources
[length
++], offset(lod2
, bld
, i
));
4733 coordinate_done
= true;
4735 case SHADER_OPCODE_TXS
:
4736 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UD
), lod
);
4739 case SHADER_OPCODE_IMAGE_SIZE
:
4740 /* We need an LOD; just use 0 */
4741 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UD
), brw_imm_ud(0));
4744 case SHADER_OPCODE_TXF
:
4745 /* Unfortunately, the parameters for LD are intermixed: u, lod, v, r.
4746 * On Gen9 they are u, v, lod, r
4748 bld
.MOV(retype(sources
[length
++], BRW_REGISTER_TYPE_D
), coordinate
);
4750 if (devinfo
->gen
>= 9) {
4751 if (coord_components
>= 2) {
4752 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_D
),
4753 offset(coordinate
, bld
, 1));
4755 sources
[length
] = brw_imm_d(0);
4760 if (devinfo
->gen
>= 9 && lod
.is_zero()) {
4761 op
= SHADER_OPCODE_TXF_LZ
;
4763 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_D
), lod
);
4767 for (unsigned i
= devinfo
->gen
>= 9 ? 2 : 1; i
< coord_components
; i
++)
4768 bld
.MOV(retype(sources
[length
++], BRW_REGISTER_TYPE_D
),
4769 offset(coordinate
, bld
, i
));
4771 coordinate_done
= true;
4774 case SHADER_OPCODE_TXF_CMS
:
4775 case SHADER_OPCODE_TXF_CMS_W
:
4776 case SHADER_OPCODE_TXF_UMS
:
4777 case SHADER_OPCODE_TXF_MCS
:
4778 if (op
== SHADER_OPCODE_TXF_UMS
||
4779 op
== SHADER_OPCODE_TXF_CMS
||
4780 op
== SHADER_OPCODE_TXF_CMS_W
) {
4781 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UD
), sample_index
);
4785 if (op
== SHADER_OPCODE_TXF_CMS
|| op
== SHADER_OPCODE_TXF_CMS_W
) {
4786 /* Data from the multisample control surface. */
4787 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UD
), mcs
);
4790 /* On Gen9+ we'll use ld2dms_w instead which has two registers for
4793 if (op
== SHADER_OPCODE_TXF_CMS_W
) {
4794 bld
.MOV(retype(sources
[length
], BRW_REGISTER_TYPE_UD
),
4797 offset(mcs
, bld
, 1));
4802 /* There is no offsetting for this message; just copy in the integer
4803 * texture coordinates.
4805 for (unsigned i
= 0; i
< coord_components
; i
++)
4806 bld
.MOV(retype(sources
[length
++], BRW_REGISTER_TYPE_D
),
4807 offset(coordinate
, bld
, i
));
4809 coordinate_done
= true;
4811 case SHADER_OPCODE_TG4_OFFSET
:
4812 /* More crazy intermixing */
4813 for (unsigned i
= 0; i
< 2; i
++) /* u, v */
4814 bld
.MOV(sources
[length
++], offset(coordinate
, bld
, i
));
4816 for (unsigned i
= 0; i
< 2; i
++) /* offu, offv */
4817 bld
.MOV(retype(sources
[length
++], BRW_REGISTER_TYPE_D
),
4818 offset(tg4_offset
, bld
, i
));
4820 if (coord_components
== 3) /* r if present */
4821 bld
.MOV(sources
[length
++], offset(coordinate
, bld
, 2));
4823 coordinate_done
= true;
4829 /* Set up the coordinate (except for cases where it was done above) */
4830 if (!coordinate_done
) {
4831 for (unsigned i
= 0; i
< coord_components
; i
++)
4832 bld
.MOV(sources
[length
++], offset(coordinate
, bld
, i
));
4835 if (min_lod
.file
!= BAD_FILE
) {
4836 /* Account for all of the missing coordinate sources */
4837 length
+= 4 - coord_components
;
4838 if (op
== SHADER_OPCODE_TXD
)
4839 length
+= (3 - grad_components
) * 2;
4841 bld
.MOV(sources
[length
++], min_lod
);
4846 mlen
= length
* reg_width
- header_size
;
4848 mlen
= length
* reg_width
;
4850 const fs_reg src_payload
= fs_reg(VGRF
, bld
.shader
->alloc
.allocate(mlen
),
4851 BRW_REGISTER_TYPE_F
);
4852 bld
.LOAD_PAYLOAD(src_payload
, sources
, length
, header_size
);
4854 /* Generate the SEND. */
4855 inst
->opcode
= SHADER_OPCODE_SEND
;
4857 inst
->header_size
= header_size
;
4859 const unsigned msg_type
=
4860 sampler_msg_type(devinfo
, op
, inst
->shadow_compare
);
4861 const unsigned simd_mode
=
4862 inst
->exec_size
<= 8 ? BRW_SAMPLER_SIMD_MODE_SIMD8
:
4863 BRW_SAMPLER_SIMD_MODE_SIMD16
;
4865 uint32_t base_binding_table_index
;
4867 case SHADER_OPCODE_TG4
:
4868 case SHADER_OPCODE_TG4_OFFSET
:
4869 base_binding_table_index
= prog_data
->binding_table
.gather_texture_start
;
4871 case SHADER_OPCODE_IMAGE_SIZE
:
4872 base_binding_table_index
= prog_data
->binding_table
.image_start
;
4875 base_binding_table_index
= prog_data
->binding_table
.texture_start
;
4879 inst
->sfid
= BRW_SFID_SAMPLER
;
4880 if (surface
.file
== IMM
&& sampler
.file
== IMM
) {
4881 inst
->desc
= brw_sampler_desc(devinfo
,
4882 surface
.ud
+ base_binding_table_index
,
4886 0 /* return_format unused on gen7+ */);
4887 inst
->src
[0] = brw_imm_ud(0);
4889 /* Immediate portion of the descriptor */
4890 inst
->desc
= brw_sampler_desc(devinfo
,
4895 0 /* return_format unused on gen7+ */);
4896 const fs_builder ubld
= bld
.group(1, 0).exec_all();
4897 fs_reg desc
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
);
4898 if (surface
.equals(sampler
)) {
4899 /* This case is common in GL */
4900 ubld
.MUL(desc
, surface
, brw_imm_ud(0x101));
4902 if (sampler
.file
== IMM
) {
4903 ubld
.OR(desc
, surface
, brw_imm_ud(sampler
.ud
<< 8));
4905 ubld
.SHL(desc
, sampler
, brw_imm_ud(8));
4906 ubld
.OR(desc
, desc
, surface
);
4909 if (base_binding_table_index
)
4910 ubld
.ADD(desc
, desc
, brw_imm_ud(base_binding_table_index
));
4911 ubld
.AND(desc
, desc
, brw_imm_ud(0xfff));
4913 inst
->src
[0] = component(desc
, 0);
4915 inst
->src
[1] = brw_imm_ud(0); /* ex_desc */
4917 inst
->src
[2] = src_payload
;
4918 inst
->resize_sources(3);
4921 /* EOT sampler messages don't make sense to split because it would
4922 * involve ending half of the thread early.
4924 assert(inst
->group
== 0);
4925 /* We need to use SENDC for EOT sampler messages */
4926 inst
->check_tdr
= true;
4927 inst
->send_has_side_effects
= true;
4930 /* Message length > MAX_SAMPLER_MESSAGE_SIZE disallowed by hardware. */
4931 assert(inst
->mlen
<= MAX_SAMPLER_MESSAGE_SIZE
);
4935 lower_sampler_logical_send(const fs_builder
&bld
, fs_inst
*inst
, opcode op
)
4937 const gen_device_info
*devinfo
= bld
.shader
->devinfo
;
4938 const fs_reg
&coordinate
= inst
->src
[TEX_LOGICAL_SRC_COORDINATE
];
4939 const fs_reg
&shadow_c
= inst
->src
[TEX_LOGICAL_SRC_SHADOW_C
];
4940 const fs_reg
&lod
= inst
->src
[TEX_LOGICAL_SRC_LOD
];
4941 const fs_reg
&lod2
= inst
->src
[TEX_LOGICAL_SRC_LOD2
];
4942 const fs_reg
&min_lod
= inst
->src
[TEX_LOGICAL_SRC_MIN_LOD
];
4943 const fs_reg
&sample_index
= inst
->src
[TEX_LOGICAL_SRC_SAMPLE_INDEX
];
4944 const fs_reg
&mcs
= inst
->src
[TEX_LOGICAL_SRC_MCS
];
4945 const fs_reg
&surface
= inst
->src
[TEX_LOGICAL_SRC_SURFACE
];
4946 const fs_reg
&sampler
= inst
->src
[TEX_LOGICAL_SRC_SAMPLER
];
4947 const fs_reg
&tg4_offset
= inst
->src
[TEX_LOGICAL_SRC_TG4_OFFSET
];
4948 assert(inst
->src
[TEX_LOGICAL_SRC_COORD_COMPONENTS
].file
== IMM
);
4949 const unsigned coord_components
= inst
->src
[TEX_LOGICAL_SRC_COORD_COMPONENTS
].ud
;
4950 assert(inst
->src
[TEX_LOGICAL_SRC_GRAD_COMPONENTS
].file
== IMM
);
4951 const unsigned grad_components
= inst
->src
[TEX_LOGICAL_SRC_GRAD_COMPONENTS
].ud
;
4953 if (devinfo
->gen
>= 7) {
4954 lower_sampler_logical_send_gen7(bld
, inst
, op
, coordinate
,
4955 shadow_c
, lod
, lod2
, min_lod
,
4957 mcs
, surface
, sampler
, tg4_offset
,
4958 coord_components
, grad_components
);
4959 } else if (devinfo
->gen
>= 5) {
4960 lower_sampler_logical_send_gen5(bld
, inst
, op
, coordinate
,
4961 shadow_c
, lod
, lod2
, sample_index
,
4963 coord_components
, grad_components
);
4965 lower_sampler_logical_send_gen4(bld
, inst
, op
, coordinate
,
4966 shadow_c
, lod
, lod2
,
4968 coord_components
, grad_components
);
4973 * Initialize the header present in some typed and untyped surface
4977 emit_surface_header(const fs_builder
&bld
, const fs_reg
&sample_mask
)
4979 fs_builder ubld
= bld
.exec_all().group(8, 0);
4980 const fs_reg dst
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
);
4981 ubld
.MOV(dst
, brw_imm_d(0));
4982 ubld
.group(1, 0).MOV(component(dst
, 7), sample_mask
);
4987 lower_surface_logical_send(const fs_builder
&bld
, fs_inst
*inst
)
4989 const gen_device_info
*devinfo
= bld
.shader
->devinfo
;
4991 /* Get the logical send arguments. */
4992 const fs_reg
&addr
= inst
->src
[0];
4993 const fs_reg
&src
= inst
->src
[1];
4994 const fs_reg
&surface
= inst
->src
[2];
4995 const UNUSED fs_reg
&dims
= inst
->src
[3];
4996 const fs_reg
&arg
= inst
->src
[4];
4997 assert(arg
.file
== IMM
);
4999 /* Calculate the total number of components of the payload. */
5000 const unsigned addr_sz
= inst
->components_read(0);
5001 const unsigned src_sz
= inst
->components_read(1);
5003 const bool is_typed_access
=
5004 inst
->opcode
== SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
||
5005 inst
->opcode
== SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
||
5006 inst
->opcode
== SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
;
5008 /* From the BDW PRM Volume 7, page 147:
5010 * "For the Data Cache Data Port*, the header must be present for the
5011 * following message types: [...] Typed read/write/atomics"
5013 * Earlier generations have a similar wording. Because of this restriction
5014 * we don't attempt to implement sample masks via predication for such
5015 * messages prior to Gen9, since we have to provide a header anyway. On
5016 * Gen11+ the header has been removed so we can only use predication.
5018 const unsigned header_sz
= devinfo
->gen
< 9 && is_typed_access
? 1 : 0;
5020 const bool has_side_effects
= inst
->has_side_effects();
5021 fs_reg sample_mask
= has_side_effects
? bld
.sample_mask_reg() :
5022 fs_reg(brw_imm_d(0xffff));
5024 fs_reg payload
, payload2
;
5025 unsigned mlen
, ex_mlen
= 0;
5026 if (devinfo
->gen
>= 9) {
5027 /* We have split sends on gen9 and above */
5028 assert(header_sz
== 0);
5029 payload
= bld
.move_to_vgrf(addr
, addr_sz
);
5030 payload2
= bld
.move_to_vgrf(src
, src_sz
);
5031 mlen
= addr_sz
* (inst
->exec_size
/ 8);
5032 ex_mlen
= src_sz
* (inst
->exec_size
/ 8);
5034 /* Allocate space for the payload. */
5035 const unsigned sz
= header_sz
+ addr_sz
+ src_sz
;
5036 payload
= bld
.vgrf(BRW_REGISTER_TYPE_UD
, sz
);
5037 fs_reg
*const components
= new fs_reg
[sz
];
5040 /* Construct the payload. */
5042 components
[n
++] = emit_surface_header(bld
, sample_mask
);
5044 for (unsigned i
= 0; i
< addr_sz
; i
++)
5045 components
[n
++] = offset(addr
, bld
, i
);
5047 for (unsigned i
= 0; i
< src_sz
; i
++)
5048 components
[n
++] = offset(src
, bld
, i
);
5050 bld
.LOAD_PAYLOAD(payload
, components
, sz
, header_sz
);
5051 mlen
= header_sz
+ (addr_sz
+ src_sz
) * inst
->exec_size
/ 8;
5053 delete[] components
;
5056 /* Predicate the instruction on the sample mask if no header is
5059 if (!header_sz
&& sample_mask
.file
!= BAD_FILE
&&
5060 sample_mask
.file
!= IMM
) {
5061 const fs_builder ubld
= bld
.group(1, 0).exec_all();
5062 if (inst
->predicate
) {
5063 assert(inst
->predicate
== BRW_PREDICATE_NORMAL
);
5064 assert(!inst
->predicate_inverse
);
5065 assert(inst
->flag_subreg
< 2);
5066 /* Combine the sample mask with the existing predicate by using a
5067 * vertical predication mode.
5069 inst
->predicate
= BRW_PREDICATE_ALIGN1_ALLV
;
5070 ubld
.MOV(retype(brw_flag_subreg(inst
->flag_subreg
+ 2),
5074 inst
->flag_subreg
= 2;
5075 inst
->predicate
= BRW_PREDICATE_NORMAL
;
5076 inst
->predicate_inverse
= false;
5077 ubld
.MOV(retype(brw_flag_subreg(inst
->flag_subreg
), sample_mask
.type
),
5083 switch (inst
->opcode
) {
5084 case SHADER_OPCODE_BYTE_SCATTERED_WRITE_LOGICAL
:
5085 case SHADER_OPCODE_BYTE_SCATTERED_READ_LOGICAL
:
5086 /* Byte scattered opcodes go through the normal data cache */
5087 sfid
= GEN7_SFID_DATAPORT_DATA_CACHE
;
5090 case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL
:
5091 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL
:
5092 case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL
:
5093 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT_LOGICAL
:
5094 /* Untyped Surface messages go through the data cache but the SFID value
5095 * changed on Haswell.
5097 sfid
= (devinfo
->gen
>= 8 || devinfo
->is_haswell
?
5098 HSW_SFID_DATAPORT_DATA_CACHE_1
:
5099 GEN7_SFID_DATAPORT_DATA_CACHE
);
5102 case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
:
5103 case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
:
5104 case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
:
5105 /* Typed surface messages go through the render cache on IVB and the
5106 * data cache on HSW+.
5108 sfid
= (devinfo
->gen
>= 8 || devinfo
->is_haswell
?
5109 HSW_SFID_DATAPORT_DATA_CACHE_1
:
5110 GEN6_SFID_DATAPORT_RENDER_CACHE
);
5114 unreachable("Unsupported surface opcode");
5118 switch (inst
->opcode
) {
5119 case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL
:
5120 desc
= brw_dp_untyped_surface_rw_desc(devinfo
, inst
->exec_size
,
5121 arg
.ud
, /* num_channels */
5125 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL
:
5126 desc
= brw_dp_untyped_surface_rw_desc(devinfo
, inst
->exec_size
,
5127 arg
.ud
, /* num_channels */
5131 case SHADER_OPCODE_BYTE_SCATTERED_READ_LOGICAL
:
5132 desc
= brw_dp_byte_scattered_rw_desc(devinfo
, inst
->exec_size
,
5133 arg
.ud
, /* bit_size */
5137 case SHADER_OPCODE_BYTE_SCATTERED_WRITE_LOGICAL
:
5138 desc
= brw_dp_byte_scattered_rw_desc(devinfo
, inst
->exec_size
,
5139 arg
.ud
, /* bit_size */
5143 case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL
:
5144 desc
= brw_dp_untyped_atomic_desc(devinfo
, inst
->exec_size
,
5145 arg
.ud
, /* atomic_op */
5146 !inst
->dst
.is_null());
5149 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT_LOGICAL
:
5150 desc
= brw_dp_untyped_atomic_float_desc(devinfo
, inst
->exec_size
,
5151 arg
.ud
, /* atomic_op */
5152 !inst
->dst
.is_null());
5155 case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
:
5156 desc
= brw_dp_typed_surface_rw_desc(devinfo
, inst
->exec_size
, inst
->group
,
5157 arg
.ud
, /* num_channels */
5161 case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
:
5162 desc
= brw_dp_typed_surface_rw_desc(devinfo
, inst
->exec_size
, inst
->group
,
5163 arg
.ud
, /* num_channels */
5167 case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
:
5168 desc
= brw_dp_typed_atomic_desc(devinfo
, inst
->exec_size
, inst
->group
,
5169 arg
.ud
, /* atomic_op */
5170 !inst
->dst
.is_null());
5174 unreachable("Unknown surface logical instruction");
5177 /* Update the original instruction. */
5178 inst
->opcode
= SHADER_OPCODE_SEND
;
5180 inst
->ex_mlen
= ex_mlen
;
5181 inst
->header_size
= header_sz
;
5182 inst
->send_has_side_effects
= has_side_effects
;
5183 inst
->send_is_volatile
= !has_side_effects
;
5185 /* Set up SFID and descriptors */
5188 if (surface
.file
== IMM
) {
5189 inst
->desc
|= surface
.ud
& 0xff;
5190 inst
->src
[0] = brw_imm_ud(0);
5192 const fs_builder ubld
= bld
.exec_all().group(1, 0);
5193 fs_reg tmp
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
);
5194 ubld
.AND(tmp
, surface
, brw_imm_ud(0xff));
5195 inst
->src
[0] = component(tmp
, 0);
5197 inst
->src
[1] = brw_imm_ud(0); /* ex_desc */
5199 /* Finally, the payload */
5200 inst
->src
[2] = payload
;
5201 inst
->src
[3] = payload2
;
5203 inst
->resize_sources(4);
5207 lower_varying_pull_constant_logical_send(const fs_builder
&bld
, fs_inst
*inst
)
5209 const gen_device_info
*devinfo
= bld
.shader
->devinfo
;
5211 if (devinfo
->gen
>= 7) {
5212 fs_reg index
= inst
->src
[0];
5213 /* We are switching the instruction from an ALU-like instruction to a
5214 * send-from-grf instruction. Since sends can't handle strides or
5215 * source modifiers, we have to make a copy of the offset source.
5217 fs_reg offset
= bld
.vgrf(BRW_REGISTER_TYPE_UD
);
5218 bld
.MOV(offset
, inst
->src
[1]);
5220 const unsigned simd_mode
=
5221 inst
->exec_size
<= 8 ? BRW_SAMPLER_SIMD_MODE_SIMD8
:
5222 BRW_SAMPLER_SIMD_MODE_SIMD16
;
5224 inst
->opcode
= SHADER_OPCODE_SEND
;
5225 inst
->mlen
= inst
->exec_size
/ 8;
5226 inst
->resize_sources(3);
5228 inst
->sfid
= BRW_SFID_SAMPLER
;
5229 inst
->desc
= brw_sampler_desc(devinfo
, 0, 0,
5230 GEN5_SAMPLER_MESSAGE_SAMPLE_LD
,
5232 if (index
.file
== IMM
) {
5233 inst
->desc
|= index
.ud
& 0xff;
5234 inst
->src
[0] = brw_imm_ud(0);
5236 const fs_builder ubld
= bld
.exec_all().group(1, 0);
5237 fs_reg tmp
= ubld
.vgrf(BRW_REGISTER_TYPE_UD
);
5238 ubld
.AND(tmp
, index
, brw_imm_ud(0xff));
5239 inst
->src
[0] = component(tmp
, 0);
5241 inst
->src
[1] = brw_imm_ud(0); /* ex_desc */
5242 inst
->src
[2] = offset
; /* payload */
5244 const fs_reg
payload(MRF
, FIRST_PULL_LOAD_MRF(devinfo
->gen
),
5245 BRW_REGISTER_TYPE_UD
);
5247 bld
.MOV(byte_offset(payload
, REG_SIZE
), inst
->src
[1]);
5249 inst
->opcode
= FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_GEN4
;
5250 inst
->resize_sources(1);
5251 inst
->base_mrf
= payload
.nr
;
5252 inst
->header_size
= 1;
5253 inst
->mlen
= 1 + inst
->exec_size
/ 8;
5258 lower_math_logical_send(const fs_builder
&bld
, fs_inst
*inst
)
5260 assert(bld
.shader
->devinfo
->gen
< 6);
5263 inst
->mlen
= inst
->sources
* inst
->exec_size
/ 8;
5265 if (inst
->sources
> 1) {
5266 /* From the Ironlake PRM, Volume 4, Part 1, Section 6.1.13
5267 * "Message Payload":
5269 * "Operand0[7]. For the INT DIV functions, this operand is the
5272 * "Operand1[7]. For the INT DIV functions, this operand is the
5275 const bool is_int_div
= inst
->opcode
!= SHADER_OPCODE_POW
;
5276 const fs_reg src0
= is_int_div
? inst
->src
[1] : inst
->src
[0];
5277 const fs_reg src1
= is_int_div
? inst
->src
[0] : inst
->src
[1];
5279 inst
->resize_sources(1);
5280 inst
->src
[0] = src0
;
5282 assert(inst
->exec_size
== 8);
5283 bld
.MOV(fs_reg(MRF
, inst
->base_mrf
+ 1, src1
.type
), src1
);
5288 fs_visitor::lower_logical_sends()
5290 bool progress
= false;
5292 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
5293 const fs_builder
ibld(this, block
, inst
);
5295 switch (inst
->opcode
) {
5296 case FS_OPCODE_FB_WRITE_LOGICAL
:
5297 assert(stage
== MESA_SHADER_FRAGMENT
);
5298 lower_fb_write_logical_send(ibld
, inst
,
5299 brw_wm_prog_data(prog_data
),
5300 (const brw_wm_prog_key
*)key
,
5304 case FS_OPCODE_FB_READ_LOGICAL
:
5305 lower_fb_read_logical_send(ibld
, inst
);
5308 case SHADER_OPCODE_TEX_LOGICAL
:
5309 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TEX
);
5312 case SHADER_OPCODE_TXD_LOGICAL
:
5313 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXD
);
5316 case SHADER_OPCODE_TXF_LOGICAL
:
5317 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXF
);
5320 case SHADER_OPCODE_TXL_LOGICAL
:
5321 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXL
);
5324 case SHADER_OPCODE_TXS_LOGICAL
:
5325 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXS
);
5328 case SHADER_OPCODE_IMAGE_SIZE_LOGICAL
:
5329 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_IMAGE_SIZE
);
5332 case FS_OPCODE_TXB_LOGICAL
:
5333 lower_sampler_logical_send(ibld
, inst
, FS_OPCODE_TXB
);
5336 case SHADER_OPCODE_TXF_CMS_LOGICAL
:
5337 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXF_CMS
);
5340 case SHADER_OPCODE_TXF_CMS_W_LOGICAL
:
5341 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXF_CMS_W
);
5344 case SHADER_OPCODE_TXF_UMS_LOGICAL
:
5345 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXF_UMS
);
5348 case SHADER_OPCODE_TXF_MCS_LOGICAL
:
5349 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TXF_MCS
);
5352 case SHADER_OPCODE_LOD_LOGICAL
:
5353 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_LOD
);
5356 case SHADER_OPCODE_TG4_LOGICAL
:
5357 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TG4
);
5360 case SHADER_OPCODE_TG4_OFFSET_LOGICAL
:
5361 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_TG4_OFFSET
);
5364 case SHADER_OPCODE_SAMPLEINFO_LOGICAL
:
5365 lower_sampler_logical_send(ibld
, inst
, SHADER_OPCODE_SAMPLEINFO
);
5368 case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL
:
5369 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL
:
5370 case SHADER_OPCODE_BYTE_SCATTERED_READ_LOGICAL
:
5371 case SHADER_OPCODE_BYTE_SCATTERED_WRITE_LOGICAL
:
5372 case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL
:
5373 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT_LOGICAL
:
5374 case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
:
5375 case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
:
5376 case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
:
5377 lower_surface_logical_send(ibld
, inst
);
5380 case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_LOGICAL
:
5381 lower_varying_pull_constant_logical_send(ibld
, inst
);
5384 case SHADER_OPCODE_RCP
:
5385 case SHADER_OPCODE_RSQ
:
5386 case SHADER_OPCODE_SQRT
:
5387 case SHADER_OPCODE_EXP2
:
5388 case SHADER_OPCODE_LOG2
:
5389 case SHADER_OPCODE_SIN
:
5390 case SHADER_OPCODE_COS
:
5391 case SHADER_OPCODE_POW
:
5392 case SHADER_OPCODE_INT_QUOTIENT
:
5393 case SHADER_OPCODE_INT_REMAINDER
:
5394 /* The math opcodes are overloaded for the send-like and
5395 * expression-like instructions which seems kind of icky. Gen6+ has
5396 * a native (but rather quirky) MATH instruction so we don't need to
5397 * do anything here. On Gen4-5 we'll have to lower the Gen6-like
5398 * logical instructions (which we can easily recognize because they
5399 * have mlen = 0) into send-like virtual instructions.
5401 if (devinfo
->gen
< 6 && inst
->mlen
== 0) {
5402 lower_math_logical_send(ibld
, inst
);
5417 invalidate_live_intervals();
5423 * Get the closest allowed SIMD width for instruction \p inst accounting for
5424 * some common regioning and execution control restrictions that apply to FPU
5425 * instructions. These restrictions don't necessarily have any relevance to
5426 * instructions not executed by the FPU pipeline like extended math, control
5427 * flow or send message instructions.
5429 * For virtual opcodes it's really up to the instruction -- In some cases
5430 * (e.g. where a virtual instruction unrolls into a simple sequence of FPU
5431 * instructions) it may simplify virtual instruction lowering if we can
5432 * enforce FPU-like regioning restrictions already on the virtual instruction,
5433 * in other cases (e.g. virtual send-like instructions) this may be
5434 * excessively restrictive.
5437 get_fpu_lowered_simd_width(const struct gen_device_info
*devinfo
,
5438 const fs_inst
*inst
)
5440 /* Maximum execution size representable in the instruction controls. */
5441 unsigned max_width
= MIN2(32, inst
->exec_size
);
5443 /* According to the PRMs:
5444 * "A. In Direct Addressing mode, a source cannot span more than 2
5445 * adjacent GRF registers.
5446 * B. A destination cannot span more than 2 adjacent GRF registers."
5448 * Look for the source or destination with the largest register region
5449 * which is the one that is going to limit the overall execution size of
5450 * the instruction due to this rule.
5452 unsigned reg_count
= DIV_ROUND_UP(inst
->size_written
, REG_SIZE
);
5454 for (unsigned i
= 0; i
< inst
->sources
; i
++)
5455 reg_count
= MAX2(reg_count
, DIV_ROUND_UP(inst
->size_read(i
), REG_SIZE
));
5457 /* Calculate the maximum execution size of the instruction based on the
5458 * factor by which it goes over the hardware limit of 2 GRFs.
5461 max_width
= MIN2(max_width
, inst
->exec_size
/ DIV_ROUND_UP(reg_count
, 2));
5463 /* According to the IVB PRMs:
5464 * "When destination spans two registers, the source MUST span two
5465 * registers. The exception to the above rule:
5467 * - When source is scalar, the source registers are not incremented.
5468 * - When source is packed integer Word and destination is packed
5469 * integer DWord, the source register is not incremented but the
5470 * source sub register is incremented."
5472 * The hardware specs from Gen4 to Gen7.5 mention similar regioning
5473 * restrictions. The code below intentionally doesn't check whether the
5474 * destination type is integer because empirically the hardware doesn't
5475 * seem to care what the actual type is as long as it's dword-aligned.
5477 if (devinfo
->gen
< 8) {
5478 for (unsigned i
= 0; i
< inst
->sources
; i
++) {
5479 /* IVB implements DF scalars as <0;2,1> regions. */
5480 const bool is_scalar_exception
= is_uniform(inst
->src
[i
]) &&
5481 (devinfo
->is_haswell
|| type_sz(inst
->src
[i
].type
) != 8);
5482 const bool is_packed_word_exception
=
5483 type_sz(inst
->dst
.type
) == 4 && inst
->dst
.stride
== 1 &&
5484 type_sz(inst
->src
[i
].type
) == 2 && inst
->src
[i
].stride
== 1;
5486 /* We check size_read(i) against size_written instead of REG_SIZE
5487 * because we want to properly handle SIMD32. In SIMD32, you can end
5488 * up with writes to 4 registers and a source that reads 2 registers
5489 * and we may still need to lower all the way to SIMD8 in that case.
5491 if (inst
->size_written
> REG_SIZE
&&
5492 inst
->size_read(i
) != 0 &&
5493 inst
->size_read(i
) < inst
->size_written
&&
5494 !is_scalar_exception
&& !is_packed_word_exception
) {
5495 const unsigned reg_count
= DIV_ROUND_UP(inst
->size_written
, REG_SIZE
);
5496 max_width
= MIN2(max_width
, inst
->exec_size
/ reg_count
);
5501 if (devinfo
->gen
< 6) {
5502 /* From the G45 PRM, Volume 4 Page 361:
5504 * "Operand Alignment Rule: With the exceptions listed below, a
5505 * source/destination operand in general should be aligned to even
5506 * 256-bit physical register with a region size equal to two 256-bit
5507 * physical registers."
5509 * Normally we enforce this by allocating virtual registers to the
5510 * even-aligned class. But we need to handle payload registers.
5512 for (unsigned i
= 0; i
< inst
->sources
; i
++) {
5513 if (inst
->src
[i
].file
== FIXED_GRF
&& (inst
->src
[i
].nr
& 1) &&
5514 inst
->size_read(i
) > REG_SIZE
) {
5515 max_width
= MIN2(max_width
, 8);
5520 /* From the IVB PRMs:
5521 * "When an instruction is SIMD32, the low 16 bits of the execution mask
5522 * are applied for both halves of the SIMD32 instruction. If different
5523 * execution mask channels are required, split the instruction into two
5524 * SIMD16 instructions."
5526 * There is similar text in the HSW PRMs. Gen4-6 don't even implement
5527 * 32-wide control flow support in hardware and will behave similarly.
5529 if (devinfo
->gen
< 8 && !inst
->force_writemask_all
)
5530 max_width
= MIN2(max_width
, 16);
5532 /* From the IVB PRMs (applies to HSW too):
5533 * "Instructions with condition modifiers must not use SIMD32."
5535 * From the BDW PRMs (applies to later hardware too):
5536 * "Ternary instruction with condition modifiers must not use SIMD32."
5538 if (inst
->conditional_mod
&& (devinfo
->gen
< 8 || inst
->is_3src(devinfo
)))
5539 max_width
= MIN2(max_width
, 16);
5541 /* From the IVB PRMs (applies to other devices that don't have the
5542 * gen_device_info::supports_simd16_3src flag set):
5543 * "In Align16 access mode, SIMD16 is not allowed for DW operations and
5544 * SIMD8 is not allowed for DF operations."
5546 if (inst
->is_3src(devinfo
) && !devinfo
->supports_simd16_3src
)
5547 max_width
= MIN2(max_width
, inst
->exec_size
/ reg_count
);
5549 /* Pre-Gen8 EUs are hardwired to use the QtrCtrl+1 (where QtrCtrl is
5550 * the 8-bit quarter of the execution mask signals specified in the
5551 * instruction control fields) for the second compressed half of any
5552 * single-precision instruction (for double-precision instructions
5553 * it's hardwired to use NibCtrl+1, at least on HSW), which means that
5554 * the EU will apply the wrong execution controls for the second
5555 * sequential GRF write if the number of channels per GRF is not exactly
5556 * eight in single-precision mode (or four in double-float mode).
5558 * In this situation we calculate the maximum size of the split
5559 * instructions so they only ever write to a single register.
5561 if (devinfo
->gen
< 8 && inst
->size_written
> REG_SIZE
&&
5562 !inst
->force_writemask_all
) {
5563 const unsigned channels_per_grf
= inst
->exec_size
/
5564 DIV_ROUND_UP(inst
->size_written
, REG_SIZE
);
5565 const unsigned exec_type_size
= get_exec_type_size(inst
);
5566 assert(exec_type_size
);
5568 /* The hardware shifts exactly 8 channels per compressed half of the
5569 * instruction in single-precision mode and exactly 4 in double-precision.
5571 if (channels_per_grf
!= (exec_type_size
== 8 ? 4 : 8))
5572 max_width
= MIN2(max_width
, channels_per_grf
);
5574 /* Lower all non-force_writemask_all DF instructions to SIMD4 on IVB/BYT
5575 * because HW applies the same channel enable signals to both halves of
5576 * the compressed instruction which will be just wrong under
5577 * non-uniform control flow.
5579 if (devinfo
->gen
== 7 && !devinfo
->is_haswell
&&
5580 (exec_type_size
== 8 || type_sz(inst
->dst
.type
) == 8))
5581 max_width
= MIN2(max_width
, 4);
5584 /* Only power-of-two execution sizes are representable in the instruction
5587 return 1 << _mesa_logbase2(max_width
);
5591 * Get the maximum allowed SIMD width for instruction \p inst accounting for
5592 * various payload size restrictions that apply to sampler message
5595 * This is only intended to provide a maximum theoretical bound for the
5596 * execution size of the message based on the number of argument components
5597 * alone, which in most cases will determine whether the SIMD8 or SIMD16
5598 * variant of the message can be used, though some messages may have
5599 * additional restrictions not accounted for here (e.g. pre-ILK hardware uses
5600 * the message length to determine the exact SIMD width and argument count,
5601 * which makes a number of sampler message combinations impossible to
5605 get_sampler_lowered_simd_width(const struct gen_device_info
*devinfo
,
5606 const fs_inst
*inst
)
5608 /* If we have a min_lod parameter on anything other than a simple sample
5609 * message, it will push it over 5 arguments and we have to fall back to
5612 if (inst
->opcode
!= SHADER_OPCODE_TEX
&&
5613 inst
->components_read(TEX_LOGICAL_SRC_MIN_LOD
))
5616 /* Calculate the number of coordinate components that have to be present
5617 * assuming that additional arguments follow the texel coordinates in the
5618 * message payload. On IVB+ there is no need for padding, on ILK-SNB we
5619 * need to pad to four or three components depending on the message,
5620 * pre-ILK we need to pad to at most three components.
5622 const unsigned req_coord_components
=
5623 (devinfo
->gen
>= 7 ||
5624 !inst
->components_read(TEX_LOGICAL_SRC_COORDINATE
)) ? 0 :
5625 (devinfo
->gen
>= 5 && inst
->opcode
!= SHADER_OPCODE_TXF_LOGICAL
&&
5626 inst
->opcode
!= SHADER_OPCODE_TXF_CMS_LOGICAL
) ? 4 :
5629 /* On Gen9+ the LOD argument is for free if we're able to use the LZ
5630 * variant of the TXL or TXF message.
5632 const bool implicit_lod
= devinfo
->gen
>= 9 &&
5633 (inst
->opcode
== SHADER_OPCODE_TXL
||
5634 inst
->opcode
== SHADER_OPCODE_TXF
) &&
5635 inst
->src
[TEX_LOGICAL_SRC_LOD
].is_zero();
5637 /* Calculate the total number of argument components that need to be passed
5638 * to the sampler unit.
5640 const unsigned num_payload_components
=
5641 MAX2(inst
->components_read(TEX_LOGICAL_SRC_COORDINATE
),
5642 req_coord_components
) +
5643 inst
->components_read(TEX_LOGICAL_SRC_SHADOW_C
) +
5644 (implicit_lod
? 0 : inst
->components_read(TEX_LOGICAL_SRC_LOD
)) +
5645 inst
->components_read(TEX_LOGICAL_SRC_LOD2
) +
5646 inst
->components_read(TEX_LOGICAL_SRC_SAMPLE_INDEX
) +
5647 (inst
->opcode
== SHADER_OPCODE_TG4_OFFSET_LOGICAL
?
5648 inst
->components_read(TEX_LOGICAL_SRC_TG4_OFFSET
) : 0) +
5649 inst
->components_read(TEX_LOGICAL_SRC_MCS
);
5651 /* SIMD16 messages with more than five arguments exceed the maximum message
5652 * size supported by the sampler, regardless of whether a header is
5655 return MIN2(inst
->exec_size
,
5656 num_payload_components
> MAX_SAMPLER_MESSAGE_SIZE
/ 2 ? 8 : 16);
5660 * Get the closest native SIMD width supported by the hardware for instruction
5661 * \p inst. The instruction will be left untouched by
5662 * fs_visitor::lower_simd_width() if the returned value is equal to the
5663 * original execution size.
5666 get_lowered_simd_width(const struct gen_device_info
*devinfo
,
5667 const fs_inst
*inst
)
5669 switch (inst
->opcode
) {
5670 case BRW_OPCODE_MOV
:
5671 case BRW_OPCODE_SEL
:
5672 case BRW_OPCODE_NOT
:
5673 case BRW_OPCODE_AND
:
5675 case BRW_OPCODE_XOR
:
5676 case BRW_OPCODE_SHR
:
5677 case BRW_OPCODE_SHL
:
5678 case BRW_OPCODE_ASR
:
5679 case BRW_OPCODE_CMPN
:
5680 case BRW_OPCODE_CSEL
:
5681 case BRW_OPCODE_F32TO16
:
5682 case BRW_OPCODE_F16TO32
:
5683 case BRW_OPCODE_BFREV
:
5684 case BRW_OPCODE_BFE
:
5685 case BRW_OPCODE_ADD
:
5686 case BRW_OPCODE_MUL
:
5687 case BRW_OPCODE_AVG
:
5688 case BRW_OPCODE_FRC
:
5689 case BRW_OPCODE_RNDU
:
5690 case BRW_OPCODE_RNDD
:
5691 case BRW_OPCODE_RNDE
:
5692 case BRW_OPCODE_RNDZ
:
5693 case BRW_OPCODE_LZD
:
5694 case BRW_OPCODE_FBH
:
5695 case BRW_OPCODE_FBL
:
5696 case BRW_OPCODE_CBIT
:
5697 case BRW_OPCODE_SAD2
:
5698 case BRW_OPCODE_MAD
:
5699 case BRW_OPCODE_LRP
:
5700 case FS_OPCODE_PACK
:
5701 case SHADER_OPCODE_SEL_EXEC
:
5702 case SHADER_OPCODE_CLUSTER_BROADCAST
:
5703 return get_fpu_lowered_simd_width(devinfo
, inst
);
5705 case BRW_OPCODE_CMP
: {
5706 /* The Ivybridge/BayTrail WaCMPInstFlagDepClearedEarly workaround says that
5707 * when the destination is a GRF the dependency-clear bit on the flag
5708 * register is cleared early.
5710 * Suggested workarounds are to disable coissuing CMP instructions
5711 * or to split CMP(16) instructions into two CMP(8) instructions.
5713 * We choose to split into CMP(8) instructions since disabling
5714 * coissuing would affect CMP instructions not otherwise affected by
5717 const unsigned max_width
= (devinfo
->gen
== 7 && !devinfo
->is_haswell
&&
5718 !inst
->dst
.is_null() ? 8 : ~0);
5719 return MIN2(max_width
, get_fpu_lowered_simd_width(devinfo
, inst
));
5721 case BRW_OPCODE_BFI1
:
5722 case BRW_OPCODE_BFI2
:
5723 /* The Haswell WaForceSIMD8ForBFIInstruction workaround says that we
5725 * "Force BFI instructions to be executed always in SIMD8."
5727 return MIN2(devinfo
->is_haswell
? 8 : ~0u,
5728 get_fpu_lowered_simd_width(devinfo
, inst
));
5731 assert(inst
->src
[0].file
== BAD_FILE
|| inst
->exec_size
<= 16);
5732 return inst
->exec_size
;
5734 case SHADER_OPCODE_RCP
:
5735 case SHADER_OPCODE_RSQ
:
5736 case SHADER_OPCODE_SQRT
:
5737 case SHADER_OPCODE_EXP2
:
5738 case SHADER_OPCODE_LOG2
:
5739 case SHADER_OPCODE_SIN
:
5740 case SHADER_OPCODE_COS
:
5741 /* Unary extended math instructions are limited to SIMD8 on Gen4 and
5744 return (devinfo
->gen
>= 7 ? MIN2(16, inst
->exec_size
) :
5745 devinfo
->gen
== 5 || devinfo
->is_g4x
? MIN2(16, inst
->exec_size
) :
5746 MIN2(8, inst
->exec_size
));
5748 case SHADER_OPCODE_POW
:
5749 /* SIMD16 is only allowed on Gen7+. */
5750 return (devinfo
->gen
>= 7 ? MIN2(16, inst
->exec_size
) :
5751 MIN2(8, inst
->exec_size
));
5753 case SHADER_OPCODE_INT_QUOTIENT
:
5754 case SHADER_OPCODE_INT_REMAINDER
:
5755 /* Integer division is limited to SIMD8 on all generations. */
5756 return MIN2(8, inst
->exec_size
);
5758 case FS_OPCODE_LINTERP
:
5759 case SHADER_OPCODE_GET_BUFFER_SIZE
:
5760 case FS_OPCODE_DDX_COARSE
:
5761 case FS_OPCODE_DDX_FINE
:
5762 case FS_OPCODE_DDY_COARSE
:
5763 case FS_OPCODE_UNIFORM_PULL_CONSTANT_LOAD
:
5764 case FS_OPCODE_PACK_HALF_2x16_SPLIT
:
5765 case FS_OPCODE_INTERPOLATE_AT_SAMPLE
:
5766 case FS_OPCODE_INTERPOLATE_AT_SHARED_OFFSET
:
5767 case FS_OPCODE_INTERPOLATE_AT_PER_SLOT_OFFSET
:
5768 return MIN2(16, inst
->exec_size
);
5770 case FS_OPCODE_VARYING_PULL_CONSTANT_LOAD_LOGICAL
:
5771 /* Pre-ILK hardware doesn't have a SIMD8 variant of the texel fetch
5772 * message used to implement varying pull constant loads, so expand it
5773 * to SIMD16. An alternative with longer message payload length but
5774 * shorter return payload would be to use the SIMD8 sampler message that
5775 * takes (header, u, v, r) as parameters instead of (header, u).
5777 return (devinfo
->gen
== 4 ? 16 : MIN2(16, inst
->exec_size
));
5779 case FS_OPCODE_DDY_FINE
:
5780 /* The implementation of this virtual opcode may require emitting
5781 * compressed Align16 instructions, which are severely limited on some
5784 * From the Ivy Bridge PRM, volume 4 part 3, section 3.3.9 (Register
5785 * Region Restrictions):
5787 * "In Align16 access mode, SIMD16 is not allowed for DW operations
5788 * and SIMD8 is not allowed for DF operations."
5790 * In this context, "DW operations" means "operations acting on 32-bit
5791 * values", so it includes operations on floats.
5793 * Gen4 has a similar restriction. From the i965 PRM, section 11.5.3
5794 * (Instruction Compression -> Rules and Restrictions):
5796 * "A compressed instruction must be in Align1 access mode. Align16
5797 * mode instructions cannot be compressed."
5799 * Similar text exists in the g45 PRM.
5801 * Empirically, compressed align16 instructions using odd register
5802 * numbers don't appear to work on Sandybridge either.
5804 return (devinfo
->gen
== 4 || devinfo
->gen
== 6 ||
5805 (devinfo
->gen
== 7 && !devinfo
->is_haswell
) ?
5806 MIN2(8, inst
->exec_size
) : MIN2(16, inst
->exec_size
));
5808 case SHADER_OPCODE_MULH
:
5809 /* MULH is lowered to the MUL/MACH sequence using the accumulator, which
5810 * is 8-wide on Gen7+.
5812 return (devinfo
->gen
>= 7 ? 8 :
5813 get_fpu_lowered_simd_width(devinfo
, inst
));
5815 case FS_OPCODE_FB_WRITE_LOGICAL
:
5816 /* Gen6 doesn't support SIMD16 depth writes but we cannot handle them
5819 assert(devinfo
->gen
!= 6 ||
5820 inst
->src
[FB_WRITE_LOGICAL_SRC_SRC_DEPTH
].file
== BAD_FILE
||
5821 inst
->exec_size
== 8);
5822 /* Dual-source FB writes are unsupported in SIMD16 mode. */
5823 return (inst
->src
[FB_WRITE_LOGICAL_SRC_COLOR1
].file
!= BAD_FILE
?
5824 8 : MIN2(16, inst
->exec_size
));
5826 case FS_OPCODE_FB_READ_LOGICAL
:
5827 return MIN2(16, inst
->exec_size
);
5829 case SHADER_OPCODE_TEX_LOGICAL
:
5830 case SHADER_OPCODE_TXF_CMS_LOGICAL
:
5831 case SHADER_OPCODE_TXF_UMS_LOGICAL
:
5832 case SHADER_OPCODE_TXF_MCS_LOGICAL
:
5833 case SHADER_OPCODE_LOD_LOGICAL
:
5834 case SHADER_OPCODE_TG4_LOGICAL
:
5835 case SHADER_OPCODE_SAMPLEINFO_LOGICAL
:
5836 case SHADER_OPCODE_TXF_CMS_W_LOGICAL
:
5837 case SHADER_OPCODE_TG4_OFFSET_LOGICAL
:
5838 return get_sampler_lowered_simd_width(devinfo
, inst
);
5840 case SHADER_OPCODE_TXD_LOGICAL
:
5841 /* TXD is unsupported in SIMD16 mode. */
5844 case SHADER_OPCODE_TXL_LOGICAL
:
5845 case FS_OPCODE_TXB_LOGICAL
:
5846 /* Only one execution size is representable pre-ILK depending on whether
5847 * the shadow reference argument is present.
5849 if (devinfo
->gen
== 4)
5850 return inst
->src
[TEX_LOGICAL_SRC_SHADOW_C
].file
== BAD_FILE
? 16 : 8;
5852 return get_sampler_lowered_simd_width(devinfo
, inst
);
5854 case SHADER_OPCODE_TXF_LOGICAL
:
5855 case SHADER_OPCODE_TXS_LOGICAL
:
5856 /* Gen4 doesn't have SIMD8 variants for the RESINFO and LD-with-LOD
5857 * messages. Use SIMD16 instead.
5859 if (devinfo
->gen
== 4)
5862 return get_sampler_lowered_simd_width(devinfo
, inst
);
5864 case SHADER_OPCODE_TYPED_ATOMIC_LOGICAL
:
5865 case SHADER_OPCODE_TYPED_SURFACE_READ_LOGICAL
:
5866 case SHADER_OPCODE_TYPED_SURFACE_WRITE_LOGICAL
:
5869 case SHADER_OPCODE_UNTYPED_ATOMIC_LOGICAL
:
5870 case SHADER_OPCODE_UNTYPED_ATOMIC_FLOAT_LOGICAL
:
5871 case SHADER_OPCODE_UNTYPED_SURFACE_READ_LOGICAL
:
5872 case SHADER_OPCODE_UNTYPED_SURFACE_WRITE_LOGICAL
:
5873 case SHADER_OPCODE_BYTE_SCATTERED_WRITE_LOGICAL
:
5874 case SHADER_OPCODE_BYTE_SCATTERED_READ_LOGICAL
:
5875 return MIN2(16, inst
->exec_size
);
5877 case SHADER_OPCODE_URB_READ_SIMD8
:
5878 case SHADER_OPCODE_URB_READ_SIMD8_PER_SLOT
:
5879 case SHADER_OPCODE_URB_WRITE_SIMD8
:
5880 case SHADER_OPCODE_URB_WRITE_SIMD8_PER_SLOT
:
5881 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED
:
5882 case SHADER_OPCODE_URB_WRITE_SIMD8_MASKED_PER_SLOT
:
5883 return MIN2(8, inst
->exec_size
);
5885 case SHADER_OPCODE_QUAD_SWIZZLE
: {
5886 const unsigned swiz
= inst
->src
[1].ud
;
5887 return (is_uniform(inst
->src
[0]) ?
5888 get_fpu_lowered_simd_width(devinfo
, inst
) :
5889 devinfo
->gen
< 11 && type_sz(inst
->src
[0].type
) == 4 ? 8 :
5890 swiz
== BRW_SWIZZLE_XYXY
|| swiz
== BRW_SWIZZLE_ZWZW
? 4 :
5891 get_fpu_lowered_simd_width(devinfo
, inst
));
5893 case SHADER_OPCODE_MOV_INDIRECT
: {
5894 /* From IVB and HSW PRMs:
5896 * "2.When the destination requires two registers and the sources are
5897 * indirect, the sources must use 1x1 regioning mode.
5899 * In case of DF instructions in HSW/IVB, the exec_size is limited by
5900 * the EU decompression logic not handling VxH indirect addressing
5903 const unsigned max_size
= (devinfo
->gen
>= 8 ? 2 : 1) * REG_SIZE
;
5904 /* Prior to Broadwell, we only have 8 address subregisters. */
5905 return MIN3(devinfo
->gen
>= 8 ? 16 : 8,
5906 max_size
/ (inst
->dst
.stride
* type_sz(inst
->dst
.type
)),
5910 case SHADER_OPCODE_LOAD_PAYLOAD
: {
5911 const unsigned reg_count
=
5912 DIV_ROUND_UP(inst
->dst
.component_size(inst
->exec_size
), REG_SIZE
);
5914 if (reg_count
> 2) {
5915 /* Only LOAD_PAYLOAD instructions with per-channel destination region
5916 * can be easily lowered (which excludes headers and heterogeneous
5919 assert(!inst
->header_size
);
5920 for (unsigned i
= 0; i
< inst
->sources
; i
++)
5921 assert(type_sz(inst
->dst
.type
) == type_sz(inst
->src
[i
].type
) ||
5922 inst
->src
[i
].file
== BAD_FILE
);
5924 return inst
->exec_size
/ DIV_ROUND_UP(reg_count
, 2);
5926 return inst
->exec_size
;
5930 return inst
->exec_size
;
5935 * Return true if splitting out the group of channels of instruction \p inst
5936 * given by lbld.group() requires allocating a temporary for the i-th source
5937 * of the lowered instruction.
5940 needs_src_copy(const fs_builder
&lbld
, const fs_inst
*inst
, unsigned i
)
5942 return !(is_periodic(inst
->src
[i
], lbld
.dispatch_width()) ||
5943 (inst
->components_read(i
) == 1 &&
5944 lbld
.dispatch_width() <= inst
->exec_size
)) ||
5945 (inst
->flags_written() &
5946 flag_mask(inst
->src
[i
], type_sz(inst
->src
[i
].type
)));
5950 * Extract the data that would be consumed by the channel group given by
5951 * lbld.group() from the i-th source region of instruction \p inst and return
5952 * it as result in packed form.
5955 emit_unzip(const fs_builder
&lbld
, fs_inst
*inst
, unsigned i
)
5957 assert(lbld
.group() >= inst
->group
);
5959 /* Specified channel group from the source region. */
5960 const fs_reg src
= horiz_offset(inst
->src
[i
], lbld
.group() - inst
->group
);
5962 if (needs_src_copy(lbld
, inst
, i
)) {
5963 /* Builder of the right width to perform the copy avoiding uninitialized
5964 * data if the lowered execution size is greater than the original
5965 * execution size of the instruction.
5967 const fs_builder cbld
= lbld
.group(MIN2(lbld
.dispatch_width(),
5968 inst
->exec_size
), 0);
5969 const fs_reg tmp
= lbld
.vgrf(inst
->src
[i
].type
, inst
->components_read(i
));
5971 for (unsigned k
= 0; k
< inst
->components_read(i
); ++k
)
5972 cbld
.MOV(offset(tmp
, lbld
, k
), offset(src
, inst
->exec_size
, k
));
5976 } else if (is_periodic(inst
->src
[i
], lbld
.dispatch_width())) {
5977 /* The source is invariant for all dispatch_width-wide groups of the
5980 return inst
->src
[i
];
5983 /* We can just point the lowered instruction at the right channel group
5984 * from the original region.
5991 * Return true if splitting out the group of channels of instruction \p inst
5992 * given by lbld.group() requires allocating a temporary for the destination
5993 * of the lowered instruction and copying the data back to the original
5994 * destination region.
5997 needs_dst_copy(const fs_builder
&lbld
, const fs_inst
*inst
)
5999 /* If the instruction writes more than one component we'll have to shuffle
6000 * the results of multiple lowered instructions in order to make sure that
6001 * they end up arranged correctly in the original destination region.
6003 if (inst
->size_written
> inst
->dst
.component_size(inst
->exec_size
))
6006 /* If the lowered execution size is larger than the original the result of
6007 * the instruction won't fit in the original destination, so we'll have to
6008 * allocate a temporary in any case.
6010 if (lbld
.dispatch_width() > inst
->exec_size
)
6013 for (unsigned i
= 0; i
< inst
->sources
; i
++) {
6014 /* If we already made a copy of the source for other reasons there won't
6015 * be any overlap with the destination.
6017 if (needs_src_copy(lbld
, inst
, i
))
6020 /* In order to keep the logic simple we emit a copy whenever the
6021 * destination region doesn't exactly match an overlapping source, which
6022 * may point at the source and destination not being aligned group by
6023 * group which could cause one of the lowered instructions to overwrite
6024 * the data read from the same source by other lowered instructions.
6026 if (regions_overlap(inst
->dst
, inst
->size_written
,
6027 inst
->src
[i
], inst
->size_read(i
)) &&
6028 !inst
->dst
.equals(inst
->src
[i
]))
6036 * Insert data from a packed temporary into the channel group given by
6037 * lbld.group() of the destination region of instruction \p inst and return
6038 * the temporary as result. Any copy instructions that are required for
6039 * unzipping the previous value (in the case of partial writes) will be
6040 * inserted using \p lbld_before and any copy instructions required for
6041 * zipping up the destination of \p inst will be inserted using \p lbld_after.
6044 emit_zip(const fs_builder
&lbld_before
, const fs_builder
&lbld_after
,
6047 assert(lbld_before
.dispatch_width() == lbld_after
.dispatch_width());
6048 assert(lbld_before
.group() == lbld_after
.group());
6049 assert(lbld_after
.group() >= inst
->group
);
6051 /* Specified channel group from the destination region. */
6052 const fs_reg dst
= horiz_offset(inst
->dst
, lbld_after
.group() - inst
->group
);
6053 const unsigned dst_size
= inst
->size_written
/
6054 inst
->dst
.component_size(inst
->exec_size
);
6056 if (needs_dst_copy(lbld_after
, inst
)) {
6057 const fs_reg tmp
= lbld_after
.vgrf(inst
->dst
.type
, dst_size
);
6059 if (inst
->predicate
) {
6060 /* Handle predication by copying the original contents of
6061 * the destination into the temporary before emitting the
6062 * lowered instruction.
6064 const fs_builder gbld_before
=
6065 lbld_before
.group(MIN2(lbld_before
.dispatch_width(),
6066 inst
->exec_size
), 0);
6067 for (unsigned k
= 0; k
< dst_size
; ++k
) {
6068 gbld_before
.MOV(offset(tmp
, lbld_before
, k
),
6069 offset(dst
, inst
->exec_size
, k
));
6073 const fs_builder gbld_after
=
6074 lbld_after
.group(MIN2(lbld_after
.dispatch_width(),
6075 inst
->exec_size
), 0);
6076 for (unsigned k
= 0; k
< dst_size
; ++k
) {
6077 /* Use a builder of the right width to perform the copy avoiding
6078 * uninitialized data if the lowered execution size is greater than
6079 * the original execution size of the instruction.
6081 gbld_after
.MOV(offset(dst
, inst
->exec_size
, k
),
6082 offset(tmp
, lbld_after
, k
));
6088 /* No need to allocate a temporary for the lowered instruction, just
6089 * take the right group of channels from the original region.
6096 fs_visitor::lower_simd_width()
6098 bool progress
= false;
6100 foreach_block_and_inst_safe(block
, fs_inst
, inst
, cfg
) {
6101 const unsigned lower_width
= get_lowered_simd_width(devinfo
, inst
);
6103 if (lower_width
!= inst
->exec_size
) {
6104 /* Builder matching the original instruction. We may also need to
6105 * emit an instruction of width larger than the original, set the
6106 * execution size of the builder to the highest of both for now so
6107 * we're sure that both cases can be handled.
6109 const unsigned max_width
= MAX2(inst
->exec_size
, lower_width
);
6110 const fs_builder ibld
= bld
.at(block
, inst
)
6111 .exec_all(inst
->force_writemask_all
)
6112 .group(max_width
, inst
->group
/ max_width
);
6114 /* Split the copies in chunks of the execution width of either the
6115 * original or the lowered instruction, whichever is lower.
6117 const unsigned n
= DIV_ROUND_UP(inst
->exec_size
, lower_width
);
6118 const unsigned dst_size
= inst
->size_written
/
6119 inst
->dst
.component_size(inst
->exec_size
);
6121 assert(!inst
->writes_accumulator
&& !inst
->mlen
);
6123 /* Inserting the zip, unzip, and duplicated instructions in all of
6124 * the right spots is somewhat tricky. All of the unzip and any
6125 * instructions from the zip which unzip the destination prior to
6126 * writing need to happen before all of the per-group instructions
6127 * and the zip instructions need to happen after. In order to sort
6128 * this all out, we insert the unzip instructions before \p inst,
6129 * insert the per-group instructions after \p inst (i.e. before
6130 * inst->next), and insert the zip instructions before the
6131 * instruction after \p inst. Since we are inserting instructions
6132 * after \p inst, inst->next is a moving target and we need to save
6133 * it off here so that we insert the zip instructions in the right
6136 * Since we're inserting split instructions after after_inst, the
6137 * instructions will end up in the reverse order that we insert them.
6138 * However, certain render target writes require that the low group
6139 * instructions come before the high group. From the Ivy Bridge PRM
6140 * Vol. 4, Pt. 1, Section 3.9.11:
6142 * "If multiple SIMD8 Dual Source messages are delivered by the
6143 * pixel shader thread, each SIMD8_DUALSRC_LO message must be
6144 * issued before the SIMD8_DUALSRC_HI message with the same Slot
6145 * Group Select setting."
6147 * And, from Section 3.9.11.1 of the same PRM:
6149 * "When SIMD32 or SIMD16 PS threads send render target writes
6150 * with multiple SIMD8 and SIMD16 messages, the following must
6153 * All the slots (as described above) must have a corresponding
6154 * render target write irrespective of the slot's validity. A slot
6155 * is considered valid when at least one sample is enabled. For
6156 * example, a SIMD16 PS thread must send two SIMD8 render target
6157 * writes to cover all the slots.
6159 * PS thread must send SIMD render target write messages with
6160 * increasing slot numbers. For example, SIMD16 thread has
6161 * Slot[15:0] and if two SIMD8 render target writes are used, the
6162 * first SIMD8 render target write must send Slot[7:0] and the
6163 * next one must send Slot[15:8]."
6165 * In order to make low group instructions come before high group
6166 * instructions (this is required for some render target writes), we
6167 * split from the highest group to lowest.
6169 exec_node
*const after_inst
= inst
->next
;
6170 for (int i
= n
- 1; i
>= 0; i
--) {
6171 /* Emit a copy of the original instruction with the lowered width.
6172 * If the EOT flag was set throw it away except for the last
6173 * instruction to avoid killing the thread prematurely.
6175 fs_inst split_inst
= *inst
;
6176 split_inst
.exec_size
= lower_width
;
6177 split_inst
.eot
= inst
->eot
&& i
== int(n
- 1);
6179 /* Select the correct channel enables for the i-th group, then
6180 * transform the sources and destination and emit the lowered
6183 const fs_builder lbld
= ibld
.group(lower_width
, i
);
6185 for (unsigned j
= 0; j
< inst
->sources
; j
++)
6186 split_inst
.src
[j
] = emit_unzip(lbld
.at(block
, inst
), inst
, j
);
6188 split_inst
.dst
= emit_zip(lbld
.at(block
, inst
),
6189 lbld
.at(block
, after_inst
), inst
);
6190 split_inst
.size_written
=
6191 split_inst
.dst
.component_size(lower_width
) * dst_size
;
6193 lbld
.at(block
, inst
->next
).emit(split_inst
);
6196 inst
->remove(block
);
6202 invalidate_live_intervals();
6208 fs_visitor::dump_instructions()
6210 dump_instructions(NULL
);
6214 fs_visitor::dump_instructions(const char *name
)
6216 FILE *file
= stderr
;
6217 if (name
&& geteuid() != 0) {
6218 file
= fopen(name
, "w");
6224 calculate_register_pressure();
6225 int ip
= 0, max_pressure
= 0;
6226 foreach_block_and_inst(block
, backend_instruction
, inst
, cfg
) {
6227 max_pressure
= MAX2(max_pressure
, regs_live_at_ip
[ip
]);
6228 fprintf(file
, "{%3d} %4d: ", regs_live_at_ip
[ip
], ip
);
6229 dump_instruction(inst
, file
);
6232 fprintf(file
, "Maximum %3d registers live at once.\n", max_pressure
);
6235 foreach_in_list(backend_instruction
, inst
, &instructions
) {
6236 fprintf(file
, "%4d: ", ip
++);
6237 dump_instruction(inst
, file
);
6241 if (file
!= stderr
) {
6247 fs_visitor::dump_instruction(backend_instruction
*be_inst
)
6249 dump_instruction(be_inst
, stderr
);
6253 fs_visitor::dump_instruction(backend_instruction
*be_inst
, FILE *file
)
6255 fs_inst
*inst
= (fs_inst
*)be_inst
;
6257 if (inst
->predicate
) {
6258 fprintf(file
, "(%cf%d.%d) ",
6259 inst
->predicate_inverse
? '-' : '+',
6260 inst
->flag_subreg
/ 2,
6261 inst
->flag_subreg
% 2);
6264 fprintf(file
, "%s", brw_instruction_name(devinfo
, inst
->opcode
));
6266 fprintf(file
, ".sat");
6267 if (inst
->conditional_mod
) {
6268 fprintf(file
, "%s", conditional_modifier
[inst
->conditional_mod
]);
6269 if (!inst
->predicate
&&
6270 (devinfo
->gen
< 5 || (inst
->opcode
!= BRW_OPCODE_SEL
&&
6271 inst
->opcode
!= BRW_OPCODE_CSEL
&&
6272 inst
->opcode
!= BRW_OPCODE_IF
&&
6273 inst
->opcode
!= BRW_OPCODE_WHILE
))) {
6274 fprintf(file
, ".f%d.%d", inst
->flag_subreg
/ 2,
6275 inst
->flag_subreg
% 2);
6278 fprintf(file
, "(%d) ", inst
->exec_size
);
6281 fprintf(file
, "(mlen: %d) ", inst
->mlen
);
6284 if (inst
->ex_mlen
) {
6285 fprintf(file
, "(ex_mlen: %d) ", inst
->ex_mlen
);
6289 fprintf(file
, "(EOT) ");
6292 switch (inst
->dst
.file
) {
6294 fprintf(file
, "vgrf%d", inst
->dst
.nr
);
6297 fprintf(file
, "g%d", inst
->dst
.nr
);
6300 fprintf(file
, "m%d", inst
->dst
.nr
);
6303 fprintf(file
, "(null)");
6306 fprintf(file
, "***u%d***", inst
->dst
.nr
);
6309 fprintf(file
, "***attr%d***", inst
->dst
.nr
);
6312 switch (inst
->dst
.nr
) {
6314 fprintf(file
, "null");
6316 case BRW_ARF_ADDRESS
:
6317 fprintf(file
, "a0.%d", inst
->dst
.subnr
);
6319 case BRW_ARF_ACCUMULATOR
:
6320 fprintf(file
, "acc%d", inst
->dst
.subnr
);
6323 fprintf(file
, "f%d.%d", inst
->dst
.nr
& 0xf, inst
->dst
.subnr
);
6326 fprintf(file
, "arf%d.%d", inst
->dst
.nr
& 0xf, inst
->dst
.subnr
);
6331 unreachable("not reached");
6334 if (inst
->dst
.offset
||
6335 (inst
->dst
.file
== VGRF
&&
6336 alloc
.sizes
[inst
->dst
.nr
] * REG_SIZE
!= inst
->size_written
)) {
6337 const unsigned reg_size
= (inst
->dst
.file
== UNIFORM
? 4 : REG_SIZE
);
6338 fprintf(file
, "+%d.%d", inst
->dst
.offset
/ reg_size
,
6339 inst
->dst
.offset
% reg_size
);
6342 if (inst
->dst
.stride
!= 1)
6343 fprintf(file
, "<%u>", inst
->dst
.stride
);
6344 fprintf(file
, ":%s, ", brw_reg_type_to_letters(inst
->dst
.type
));
6346 for (int i
= 0; i
< inst
->sources
; i
++) {
6347 if (inst
->src
[i
].negate
)
6349 if (inst
->src
[i
].abs
)
6351 switch (inst
->src
[i
].file
) {
6353 fprintf(file
, "vgrf%d", inst
->src
[i
].nr
);
6356 fprintf(file
, "g%d", inst
->src
[i
].nr
);
6359 fprintf(file
, "***m%d***", inst
->src
[i
].nr
);
6362 fprintf(file
, "attr%d", inst
->src
[i
].nr
);
6365 fprintf(file
, "u%d", inst
->src
[i
].nr
);
6368 fprintf(file
, "(null)");
6371 switch (inst
->src
[i
].type
) {
6372 case BRW_REGISTER_TYPE_F
:
6373 fprintf(file
, "%-gf", inst
->src
[i
].f
);
6375 case BRW_REGISTER_TYPE_DF
:
6376 fprintf(file
, "%fdf", inst
->src
[i
].df
);
6378 case BRW_REGISTER_TYPE_W
:
6379 case BRW_REGISTER_TYPE_D
:
6380 fprintf(file
, "%dd", inst
->src
[i
].d
);
6382 case BRW_REGISTER_TYPE_UW
:
6383 case BRW_REGISTER_TYPE_UD
:
6384 fprintf(file
, "%uu", inst
->src
[i
].ud
);
6386 case BRW_REGISTER_TYPE_Q
:
6387 fprintf(file
, "%" PRId64
"q", inst
->src
[i
].d64
);
6389 case BRW_REGISTER_TYPE_UQ
:
6390 fprintf(file
, "%" PRIu64
"uq", inst
->src
[i
].u64
);
6392 case BRW_REGISTER_TYPE_VF
:
6393 fprintf(file
, "[%-gF, %-gF, %-gF, %-gF]",
6394 brw_vf_to_float((inst
->src
[i
].ud
>> 0) & 0xff),
6395 brw_vf_to_float((inst
->src
[i
].ud
>> 8) & 0xff),
6396 brw_vf_to_float((inst
->src
[i
].ud
>> 16) & 0xff),
6397 brw_vf_to_float((inst
->src
[i
].ud
>> 24) & 0xff));
6399 case BRW_REGISTER_TYPE_V
:
6400 case BRW_REGISTER_TYPE_UV
:
6401 fprintf(file
, "%08x%s", inst
->src
[i
].ud
,
6402 inst
->src
[i
].type
== BRW_REGISTER_TYPE_V
? "V" : "UV");
6405 fprintf(file
, "???");
6410 switch (inst
->src
[i
].nr
) {
6412 fprintf(file
, "null");
6414 case BRW_ARF_ADDRESS
:
6415 fprintf(file
, "a0.%d", inst
->src
[i
].subnr
);
6417 case BRW_ARF_ACCUMULATOR
:
6418 fprintf(file
, "acc%d", inst
->src
[i
].subnr
);
6421 fprintf(file
, "f%d.%d", inst
->src
[i
].nr
& 0xf, inst
->src
[i
].subnr
);
6424 fprintf(file
, "arf%d.%d", inst
->src
[i
].nr
& 0xf, inst
->src
[i
].subnr
);
6430 if (inst
->src
[i
].offset
||
6431 (inst
->src
[i
].file
== VGRF
&&
6432 alloc
.sizes
[inst
->src
[i
].nr
] * REG_SIZE
!= inst
->size_read(i
))) {
6433 const unsigned reg_size
= (inst
->src
[i
].file
== UNIFORM
? 4 : REG_SIZE
);
6434 fprintf(file
, "+%d.%d", inst
->src
[i
].offset
/ reg_size
,
6435 inst
->src
[i
].offset
% reg_size
);
6438 if (inst
->src
[i
].abs
)
6441 if (inst
->src
[i
].file
!= IMM
) {
6443 if (inst
->src
[i
].file
== ARF
|| inst
->src
[i
].file
== FIXED_GRF
) {
6444 unsigned hstride
= inst
->src
[i
].hstride
;
6445 stride
= (hstride
== 0 ? 0 : (1 << (hstride
- 1)));
6447 stride
= inst
->src
[i
].stride
;
6450 fprintf(file
, "<%u>", stride
);
6452 fprintf(file
, ":%s", brw_reg_type_to_letters(inst
->src
[i
].type
));
6455 if (i
< inst
->sources
- 1 && inst
->src
[i
+ 1].file
!= BAD_FILE
)
6456 fprintf(file
, ", ");
6461 if (inst
->force_writemask_all
)
6462 fprintf(file
, "NoMask ");
6464 if (inst
->exec_size
!= dispatch_width
)
6465 fprintf(file
, "group%d ", inst
->group
);
6467 fprintf(file
, "\n");
6471 fs_visitor::setup_fs_payload_gen6()
6473 assert(stage
== MESA_SHADER_FRAGMENT
);
6474 struct brw_wm_prog_data
*prog_data
= brw_wm_prog_data(this->prog_data
);
6475 const unsigned payload_width
= MIN2(16, dispatch_width
);
6476 assert(dispatch_width
% payload_width
== 0);
6477 assert(devinfo
->gen
>= 6);
6479 prog_data
->uses_src_depth
= prog_data
->uses_src_w
=
6480 (nir
->info
.inputs_read
& (1 << VARYING_SLOT_POS
)) != 0;
6482 prog_data
->uses_sample_mask
=
6483 (nir
->info
.system_values_read
& SYSTEM_BIT_SAMPLE_MASK_IN
) != 0;
6485 /* From the Ivy Bridge PRM documentation for 3DSTATE_PS:
6487 * "MSDISPMODE_PERSAMPLE is required in order to select
6490 * So we can only really get sample positions if we are doing real
6491 * per-sample dispatch. If we need gl_SamplePosition and we don't have
6492 * persample dispatch, we hard-code it to 0.5.
6494 prog_data
->uses_pos_offset
= prog_data
->persample_dispatch
&&
6495 (nir
->info
.system_values_read
& SYSTEM_BIT_SAMPLE_POS
);
6497 /* R0: PS thread payload header. */
6500 for (unsigned j
= 0; j
< dispatch_width
/ payload_width
; j
++) {
6501 /* R1: masks, pixel X/Y coordinates. */
6502 payload
.subspan_coord_reg
[j
] = payload
.num_regs
++;
6505 for (unsigned j
= 0; j
< dispatch_width
/ payload_width
; j
++) {
6506 /* R3-26: barycentric interpolation coordinates. These appear in the
6507 * same order that they appear in the brw_barycentric_mode enum. Each
6508 * set of coordinates occupies 2 registers if dispatch width == 8 and 4
6509 * registers if dispatch width == 16. Coordinates only appear if they
6510 * were enabled using the "Barycentric Interpolation Mode" bits in
6513 for (int i
= 0; i
< BRW_BARYCENTRIC_MODE_COUNT
; ++i
) {
6514 if (prog_data
->barycentric_interp_modes
& (1 << i
)) {
6515 payload
.barycentric_coord_reg
[i
][j
] = payload
.num_regs
;
6516 payload
.num_regs
+= payload_width
/ 4;
6520 /* R27-28: interpolated depth if uses source depth */
6521 if (prog_data
->uses_src_depth
) {
6522 payload
.source_depth_reg
[j
] = payload
.num_regs
;
6523 payload
.num_regs
+= payload_width
/ 8;
6526 /* R29-30: interpolated W set if GEN6_WM_USES_SOURCE_W. */
6527 if (prog_data
->uses_src_w
) {
6528 payload
.source_w_reg
[j
] = payload
.num_regs
;
6529 payload
.num_regs
+= payload_width
/ 8;
6532 /* R31: MSAA position offsets. */
6533 if (prog_data
->uses_pos_offset
) {
6534 payload
.sample_pos_reg
[j
] = payload
.num_regs
;
6538 /* R32-33: MSAA input coverage mask */
6539 if (prog_data
->uses_sample_mask
) {
6540 assert(devinfo
->gen
>= 7);
6541 payload
.sample_mask_in_reg
[j
] = payload
.num_regs
;
6542 payload
.num_regs
+= payload_width
/ 8;
6546 if (nir
->info
.outputs_written
& BITFIELD64_BIT(FRAG_RESULT_DEPTH
)) {
6547 source_depth_to_render_target
= true;
6552 fs_visitor::setup_vs_payload()
6554 /* R0: thread header, R1: urb handles */
6555 payload
.num_regs
= 2;
6559 fs_visitor::setup_gs_payload()
6561 assert(stage
== MESA_SHADER_GEOMETRY
);
6563 struct brw_gs_prog_data
*gs_prog_data
= brw_gs_prog_data(prog_data
);
6564 struct brw_vue_prog_data
*vue_prog_data
= brw_vue_prog_data(prog_data
);
6566 /* R0: thread header, R1: output URB handles */
6567 payload
.num_regs
= 2;
6569 if (gs_prog_data
->include_primitive_id
) {
6570 /* R2: Primitive ID 0..7 */
6574 /* Always enable VUE handles so we can safely use pull model if needed.
6576 * The push model for a GS uses a ton of register space even for trivial
6577 * scenarios with just a few inputs, so just make things easier and a bit
6578 * safer by always having pull model available.
6580 gs_prog_data
->base
.include_vue_handles
= true;
6582 /* R3..RN: ICP Handles for each incoming vertex (when using pull model) */
6583 payload
.num_regs
+= nir
->info
.gs
.vertices_in
;
6585 /* Use a maximum of 24 registers for push-model inputs. */
6586 const unsigned max_push_components
= 24;
6588 /* If pushing our inputs would take too many registers, reduce the URB read
6589 * length (which is in HWords, or 8 registers), and resort to pulling.
6591 * Note that the GS reads <URB Read Length> HWords for every vertex - so we
6592 * have to multiply by VerticesIn to obtain the total storage requirement.
6594 if (8 * vue_prog_data
->urb_read_length
* nir
->info
.gs
.vertices_in
>
6595 max_push_components
) {
6596 vue_prog_data
->urb_read_length
=
6597 ROUND_DOWN_TO(max_push_components
/ nir
->info
.gs
.vertices_in
, 8) / 8;
6602 fs_visitor::setup_cs_payload()
6604 assert(devinfo
->gen
>= 7);
6605 payload
.num_regs
= 1;
6609 fs_visitor::calculate_register_pressure()
6611 invalidate_live_intervals();
6612 calculate_live_intervals();
6614 unsigned num_instructions
= 0;
6615 foreach_block(block
, cfg
)
6616 num_instructions
+= block
->instructions
.length();
6618 regs_live_at_ip
= rzalloc_array(mem_ctx
, int, num_instructions
);
6620 for (unsigned reg
= 0; reg
< alloc
.count
; reg
++) {
6621 for (int ip
= virtual_grf_start
[reg
]; ip
<= virtual_grf_end
[reg
]; ip
++)
6622 regs_live_at_ip
[ip
] += alloc
.sizes
[reg
];
6627 fs_visitor::optimize()
6629 /* Start by validating the shader we currently have. */
6632 /* bld is the common builder object pointing at the end of the program we
6633 * used to translate it into i965 IR. For the optimization and lowering
6634 * passes coming next, any code added after the end of the program without
6635 * having explicitly called fs_builder::at() clearly points at a mistake.
6636 * Ideally optimization passes wouldn't be part of the visitor so they
6637 * wouldn't have access to bld at all, but they do, so just in case some
6638 * pass forgets to ask for a location explicitly set it to NULL here to
6639 * make it trip. The dispatch width is initialized to a bogus value to
6640 * make sure that optimizations set the execution controls explicitly to
6641 * match the code they are manipulating instead of relying on the defaults.
6643 bld
= fs_builder(this, 64);
6645 assign_constant_locations();
6646 lower_constant_loads();
6650 split_virtual_grfs();
6653 #define OPT(pass, args...) ({ \
6655 bool this_progress = pass(args); \
6657 if (unlikely(INTEL_DEBUG & DEBUG_OPTIMIZER) && this_progress) { \
6658 char filename[64]; \
6659 snprintf(filename, 64, "%s%d-%s-%02d-%02d-" #pass, \
6660 stage_abbrev, dispatch_width, nir->info.name, iteration, pass_num); \
6662 backend_shader::dump_instructions(filename); \
6667 progress = progress || this_progress; \
6671 if (unlikely(INTEL_DEBUG
& DEBUG_OPTIMIZER
)) {
6673 snprintf(filename
, 64, "%s%d-%s-00-00-start",
6674 stage_abbrev
, dispatch_width
, nir
->info
.name
);
6676 backend_shader::dump_instructions(filename
);
6679 bool progress
= false;
6683 OPT(remove_extra_rounding_modes
);
6690 OPT(remove_duplicate_mrf_writes
);
6694 OPT(opt_copy_propagation
);
6695 OPT(opt_predicated_break
, this);
6696 OPT(opt_cmod_propagation
);
6697 OPT(dead_code_eliminate
);
6698 OPT(opt_peephole_sel
);
6699 OPT(dead_control_flow_eliminate
, this);
6700 OPT(opt_register_renaming
);
6701 OPT(opt_saturate_propagation
);
6702 OPT(register_coalesce
);
6703 OPT(compute_to_mrf
);
6704 OPT(eliminate_find_live_channel
);
6706 OPT(compact_virtual_grfs
);
6709 /* Do this after cmod propagation has had every possible opportunity to
6710 * propagate results into SEL instructions.
6712 if (OPT(opt_peephole_csel
))
6713 OPT(dead_code_eliminate
);
6718 if (OPT(lower_pack
)) {
6719 OPT(register_coalesce
);
6720 OPT(dead_code_eliminate
);
6723 OPT(lower_simd_width
);
6725 /* After SIMD lowering just in case we had to unroll the EOT send. */
6726 OPT(opt_sampler_eot
);
6728 OPT(lower_logical_sends
);
6731 OPT(opt_copy_propagation
);
6732 /* Only run after logical send lowering because it's easier to implement
6733 * in terms of physical sends.
6735 if (OPT(opt_zero_samples
))
6736 OPT(opt_copy_propagation
);
6737 /* Run after logical send lowering to give it a chance to CSE the
6738 * LOAD_PAYLOAD instructions created to construct the payloads of
6739 * e.g. texturing messages in cases where it wasn't possible to CSE the
6740 * whole logical instruction.
6743 OPT(register_coalesce
);
6744 OPT(compute_to_mrf
);
6745 OPT(dead_code_eliminate
);
6746 OPT(remove_duplicate_mrf_writes
);
6747 OPT(opt_peephole_sel
);
6750 OPT(opt_redundant_discard_jumps
);
6752 if (OPT(lower_load_payload
)) {
6753 split_virtual_grfs();
6754 OPT(register_coalesce
);
6755 OPT(lower_simd_width
);
6756 OPT(compute_to_mrf
);
6757 OPT(dead_code_eliminate
);
6760 OPT(opt_combine_constants
);
6761 OPT(lower_integer_multiplication
);
6763 if (devinfo
->gen
<= 5 && OPT(lower_minmax
)) {
6764 OPT(opt_cmod_propagation
);
6766 OPT(opt_copy_propagation
);
6767 OPT(dead_code_eliminate
);
6770 if (OPT(lower_regioning
)) {
6771 OPT(opt_copy_propagation
);
6772 OPT(dead_code_eliminate
);
6773 OPT(lower_simd_width
);
6776 OPT(fixup_sends_duplicate_payload
);
6778 lower_uniform_pull_constant_loads();
6784 * From the Skylake PRM Vol. 2a docs for sends:
6786 * "It is required that the second block of GRFs does not overlap with the
6789 * There are plenty of cases where we may accidentally violate this due to
6790 * having, for instance, both sources be the constant 0. This little pass
6791 * just adds a new vgrf for the second payload and copies it over.
6794 fs_visitor::fixup_sends_duplicate_payload()
6796 bool progress
= false;
6798 foreach_block_and_inst_safe (block
, fs_inst
, inst
, cfg
) {
6799 if (inst
->opcode
== SHADER_OPCODE_SEND
&& inst
->ex_mlen
> 0 &&
6800 regions_overlap(inst
->src
[2], inst
->mlen
* REG_SIZE
,
6801 inst
->src
[3], inst
->ex_mlen
* REG_SIZE
)) {
6802 fs_reg tmp
= fs_reg(VGRF
, alloc
.allocate(inst
->ex_mlen
),
6803 BRW_REGISTER_TYPE_UD
);
6804 /* Sadly, we've lost all notion of channels and bit sizes at this
6805 * point. Just WE_all it.
6807 const fs_builder ibld
= bld
.at(block
, inst
).exec_all().group(16, 0);
6808 fs_reg copy_src
= retype(inst
->src
[3], BRW_REGISTER_TYPE_UD
);
6809 fs_reg copy_dst
= tmp
;
6810 for (unsigned i
= 0; i
< inst
->ex_mlen
; i
+= 2) {
6811 if (inst
->ex_mlen
== i
+ 1) {
6812 /* Only one register left; do SIMD8 */
6813 ibld
.group(8, 0).MOV(copy_dst
, copy_src
);
6815 ibld
.MOV(copy_dst
, copy_src
);
6817 copy_src
= offset(copy_src
, ibld
, 1);
6818 copy_dst
= offset(copy_dst
, ibld
, 1);
6826 invalidate_live_intervals();
6832 * Three source instruction must have a GRF/MRF destination register.
6833 * ARF NULL is not allowed. Fix that up by allocating a temporary GRF.
6836 fs_visitor::fixup_3src_null_dest()
6838 bool progress
= false;
6840 foreach_block_and_inst_safe (block
, fs_inst
, inst
, cfg
) {
6841 if (inst
->is_3src(devinfo
) && inst
->dst
.is_null()) {
6842 inst
->dst
= fs_reg(VGRF
, alloc
.allocate(dispatch_width
/ 8),
6849 invalidate_live_intervals();
6853 fs_visitor::allocate_registers(unsigned min_dispatch_width
, bool allow_spilling
)
6855 bool allocated_without_spills
;
6857 static const enum instruction_scheduler_mode pre_modes
[] = {
6859 SCHEDULE_PRE_NON_LIFO
,
6863 bool spill_all
= allow_spilling
&& (INTEL_DEBUG
& DEBUG_SPILL_FS
);
6865 /* Try each scheduling heuristic to see if it can successfully register
6866 * allocate without spilling. They should be ordered by decreasing
6867 * performance but increasing likelihood of allocating.
6869 for (unsigned i
= 0; i
< ARRAY_SIZE(pre_modes
); i
++) {
6870 schedule_instructions(pre_modes
[i
]);
6873 assign_regs_trivial();
6874 allocated_without_spills
= true;
6876 allocated_without_spills
= assign_regs(false, spill_all
);
6878 if (allocated_without_spills
)
6882 if (!allocated_without_spills
) {
6883 if (!allow_spilling
)
6884 fail("Failure to register allocate and spilling is not allowed.");
6886 /* We assume that any spilling is worse than just dropping back to
6887 * SIMD8. There's probably actually some intermediate point where
6888 * SIMD16 with a couple of spills is still better.
6890 if (dispatch_width
> min_dispatch_width
) {
6891 fail("Failure to register allocate. Reduce number of "
6892 "live scalar values to avoid this.");
6894 compiler
->shader_perf_log(log_data
,
6895 "%s shader triggered register spilling. "
6896 "Try reducing the number of live scalar "
6897 "values to improve performance.\n",
6901 /* Since we're out of heuristics, just go spill registers until we
6902 * get an allocation.
6904 while (!assign_regs(true, spill_all
)) {
6910 /* This must come after all optimization and register allocation, since
6911 * it inserts dead code that happens to have side effects, and it does
6912 * so based on the actual physical registers in use.
6914 insert_gen4_send_dependency_workarounds();
6919 opt_bank_conflicts();
6921 schedule_instructions(SCHEDULE_POST
);
6923 if (last_scratch
> 0) {
6924 MAYBE_UNUSED
unsigned max_scratch_size
= 2 * 1024 * 1024;
6926 prog_data
->total_scratch
= brw_get_scratch_size(last_scratch
);
6928 if (stage
== MESA_SHADER_COMPUTE
) {
6929 if (devinfo
->is_haswell
) {
6930 /* According to the MEDIA_VFE_STATE's "Per Thread Scratch Space"
6931 * field documentation, Haswell supports a minimum of 2kB of
6932 * scratch space for compute shaders, unlike every other stage
6935 prog_data
->total_scratch
= MAX2(prog_data
->total_scratch
, 2048);
6936 } else if (devinfo
->gen
<= 7) {
6937 /* According to the MEDIA_VFE_STATE's "Per Thread Scratch Space"
6938 * field documentation, platforms prior to Haswell measure scratch
6939 * size linearly with a range of [1kB, 12kB] and 1kB granularity.
6941 prog_data
->total_scratch
= ALIGN(last_scratch
, 1024);
6942 max_scratch_size
= 12 * 1024;
6946 /* We currently only support up to 2MB of scratch space. If we
6947 * need to support more eventually, the documentation suggests
6948 * that we could allocate a larger buffer, and partition it out
6949 * ourselves. We'd just have to undo the hardware's address
6950 * calculation by subtracting (FFTID * Per Thread Scratch Space)
6951 * and then add FFTID * (Larger Per Thread Scratch Space).
6953 * See 3D-Media-GPGPU Engine > Media GPGPU Pipeline >
6954 * Thread Group Tracking > Local Memory/Scratch Space.
6956 assert(prog_data
->total_scratch
< max_scratch_size
);
6961 fs_visitor::run_vs()
6963 assert(stage
== MESA_SHADER_VERTEX
);
6967 if (shader_time_index
>= 0)
6968 emit_shader_time_begin();
6975 compute_clip_distance();
6979 if (shader_time_index
>= 0)
6980 emit_shader_time_end();
6986 assign_curb_setup();
6987 assign_vs_urb_setup();
6989 fixup_3src_null_dest();
6990 allocate_registers(8, true);
6996 fs_visitor::run_tcs_single_patch()
6998 assert(stage
== MESA_SHADER_TESS_CTRL
);
7000 struct brw_tcs_prog_data
*tcs_prog_data
= brw_tcs_prog_data(prog_data
);
7002 /* r1-r4 contain the ICP handles. */
7003 payload
.num_regs
= 5;
7005 if (shader_time_index
>= 0)
7006 emit_shader_time_begin();
7008 /* Initialize gl_InvocationID */
7009 fs_reg channels_uw
= bld
.vgrf(BRW_REGISTER_TYPE_UW
);
7010 fs_reg channels_ud
= bld
.vgrf(BRW_REGISTER_TYPE_UD
);
7011 bld
.MOV(channels_uw
, fs_reg(brw_imm_uv(0x76543210)));
7012 bld
.MOV(channels_ud
, channels_uw
);
7014 if (tcs_prog_data
->instances
== 1) {
7015 invocation_id
= channels_ud
;
7017 const unsigned invocation_id_mask
= devinfo
->gen
>= 11 ?
7018 INTEL_MASK(22, 16) : INTEL_MASK(23, 17);
7019 const unsigned invocation_id_shift
= devinfo
->gen
>= 11 ? 16 : 17;
7021 invocation_id
= bld
.vgrf(BRW_REGISTER_TYPE_UD
);
7023 /* Get instance number from g0.2 bits 23:17, and multiply it by 8. */
7024 fs_reg t
= bld
.vgrf(BRW_REGISTER_TYPE_UD
);
7025 fs_reg instance_times_8
= bld
.vgrf(BRW_REGISTER_TYPE_UD
);
7026 bld
.AND(t
, fs_reg(retype(brw_vec1_grf(0, 2), BRW_REGISTER_TYPE_UD
)),
7027 brw_imm_ud(invocation_id_mask
));
7028 bld
.SHR(instance_times_8
, t
, brw_imm_ud(invocation_id_shift
- 3));
7030 bld
.ADD(invocation_id
, instance_times_8
, channels_ud
);
7033 /* Fix the disptach mask */
7034 if (nir
->info
.tess
.tcs_vertices_out
% 8) {
7035 bld
.CMP(bld
.null_reg_ud(), invocation_id
,
7036 brw_imm_ud(nir
->info
.tess
.tcs_vertices_out
), BRW_CONDITIONAL_L
);
7037 bld
.IF(BRW_PREDICATE_NORMAL
);
7042 if (nir
->info
.tess
.tcs_vertices_out
% 8) {
7043 bld
.emit(BRW_OPCODE_ENDIF
);
7046 /* Emit EOT write; set TR DS Cache bit */
7048 fs_reg(retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UD
)),
7049 fs_reg(brw_imm_ud(WRITEMASK_X
<< 16)),
7050 fs_reg(brw_imm_ud(0)),
7052 fs_reg payload
= bld
.vgrf(BRW_REGISTER_TYPE_UD
, 3);
7053 bld
.LOAD_PAYLOAD(payload
, srcs
, 3, 2);
7055 fs_inst
*inst
= bld
.emit(SHADER_OPCODE_URB_WRITE_SIMD8_MASKED
,
7056 bld
.null_reg_ud(), payload
);
7060 if (shader_time_index
>= 0)
7061 emit_shader_time_end();
7070 assign_curb_setup();
7071 assign_tcs_single_patch_urb_setup();
7073 fixup_3src_null_dest();
7074 allocate_registers(8, true);
7080 fs_visitor::run_tes()
7082 assert(stage
== MESA_SHADER_TESS_EVAL
);
7084 /* R0: thread header, R1-3: gl_TessCoord.xyz, R4: URB handles */
7085 payload
.num_regs
= 5;
7087 if (shader_time_index
>= 0)
7088 emit_shader_time_begin();
7097 if (shader_time_index
>= 0)
7098 emit_shader_time_end();
7104 assign_curb_setup();
7105 assign_tes_urb_setup();
7107 fixup_3src_null_dest();
7108 allocate_registers(8, true);
7114 fs_visitor::run_gs()
7116 assert(stage
== MESA_SHADER_GEOMETRY
);
7120 this->final_gs_vertex_count
= vgrf(glsl_type::uint_type
);
7122 if (gs_compile
->control_data_header_size_bits
> 0) {
7123 /* Create a VGRF to store accumulated control data bits. */
7124 this->control_data_bits
= vgrf(glsl_type::uint_type
);
7126 /* If we're outputting more than 32 control data bits, then EmitVertex()
7127 * will set control_data_bits to 0 after emitting the first vertex.
7128 * Otherwise, we need to initialize it to 0 here.
7130 if (gs_compile
->control_data_header_size_bits
<= 32) {
7131 const fs_builder abld
= bld
.annotate("initialize control data bits");
7132 abld
.MOV(this->control_data_bits
, brw_imm_ud(0u));
7136 if (shader_time_index
>= 0)
7137 emit_shader_time_begin();
7141 emit_gs_thread_end();
7143 if (shader_time_index
>= 0)
7144 emit_shader_time_end();
7153 assign_curb_setup();
7154 assign_gs_urb_setup();
7156 fixup_3src_null_dest();
7157 allocate_registers(8, true);
7162 /* From the SKL PRM, Volume 16, Workarounds:
7164 * 0877 3D Pixel Shader Hang possible when pixel shader dispatched with
7165 * only header phases (R0-R2)
7167 * WA: Enable a non-header phase (e.g. push constant) when dispatch would
7168 * have been header only.
7170 * Instead of enabling push constants one can alternatively enable one of the
7171 * inputs. Here one simply chooses "layer" which shouldn't impose much
7175 gen9_ps_header_only_workaround(struct brw_wm_prog_data
*wm_prog_data
)
7177 if (wm_prog_data
->num_varying_inputs
)
7180 if (wm_prog_data
->base
.curb_read_length
)
7183 wm_prog_data
->urb_setup
[VARYING_SLOT_LAYER
] = 0;
7184 wm_prog_data
->num_varying_inputs
= 1;
7188 fs_visitor::run_fs(bool allow_spilling
, bool do_rep_send
)
7190 struct brw_wm_prog_data
*wm_prog_data
= brw_wm_prog_data(this->prog_data
);
7191 brw_wm_prog_key
*wm_key
= (brw_wm_prog_key
*) this->key
;
7193 assert(stage
== MESA_SHADER_FRAGMENT
);
7195 if (devinfo
->gen
>= 6)
7196 setup_fs_payload_gen6();
7198 setup_fs_payload_gen4();
7202 } else if (do_rep_send
) {
7203 assert(dispatch_width
== 16);
7204 emit_repclear_shader();
7206 if (shader_time_index
>= 0)
7207 emit_shader_time_begin();
7209 calculate_urb_setup();
7210 if (nir
->info
.inputs_read
> 0 ||
7211 (nir
->info
.outputs_read
> 0 && !wm_key
->coherent_fb_fetch
)) {
7212 if (devinfo
->gen
< 6)
7213 emit_interpolation_setup_gen4();
7215 emit_interpolation_setup_gen6();
7218 /* We handle discards by keeping track of the still-live pixels in f0.1.
7219 * Initialize it with the dispatched pixels.
7221 if (wm_prog_data
->uses_kill
) {
7222 const fs_reg dispatch_mask
=
7223 devinfo
->gen
>= 6 ? brw_vec1_grf(1, 7) : brw_vec1_grf(0, 0);
7224 bld
.exec_all().group(1, 0)
7225 .MOV(retype(brw_flag_reg(0, 1), BRW_REGISTER_TYPE_UW
),
7226 retype(dispatch_mask
, BRW_REGISTER_TYPE_UW
));
7234 if (wm_prog_data
->uses_kill
)
7235 bld
.emit(FS_OPCODE_PLACEHOLDER_HALT
);
7237 if (wm_key
->alpha_test_func
)
7242 if (shader_time_index
>= 0)
7243 emit_shader_time_end();
7249 assign_curb_setup();
7251 if (devinfo
->gen
>= 9)
7252 gen9_ps_header_only_workaround(wm_prog_data
);
7256 fixup_3src_null_dest();
7257 allocate_registers(8, allow_spilling
);
7267 fs_visitor::run_cs(unsigned min_dispatch_width
)
7269 assert(stage
== MESA_SHADER_COMPUTE
);
7270 assert(dispatch_width
>= min_dispatch_width
);
7274 if (shader_time_index
>= 0)
7275 emit_shader_time_begin();
7277 if (devinfo
->is_haswell
&& prog_data
->total_shared
> 0) {
7278 /* Move SLM index from g0.0[27:24] to sr0.1[11:8] */
7279 const fs_builder abld
= bld
.exec_all().group(1, 0);
7280 abld
.MOV(retype(brw_sr0_reg(1), BRW_REGISTER_TYPE_UW
),
7281 suboffset(retype(brw_vec1_grf(0, 0), BRW_REGISTER_TYPE_UW
), 1));
7289 emit_cs_terminate();
7291 if (shader_time_index
>= 0)
7292 emit_shader_time_end();
7298 assign_curb_setup();
7300 fixup_3src_null_dest();
7301 allocate_registers(min_dispatch_width
, true);
7310 * Return a bitfield where bit n is set if barycentric interpolation mode n
7311 * (see enum brw_barycentric_mode) is needed by the fragment shader.
7313 * We examine the load_barycentric intrinsics rather than looking at input
7314 * variables so that we catch interpolateAtCentroid() messages too, which
7315 * also need the BRW_BARYCENTRIC_[NON]PERSPECTIVE_CENTROID mode set up.
7318 brw_compute_barycentric_interp_modes(const struct gen_device_info
*devinfo
,
7319 const nir_shader
*shader
)
7321 unsigned barycentric_interp_modes
= 0;
7323 nir_foreach_function(f
, shader
) {
7327 nir_foreach_block(block
, f
->impl
) {
7328 nir_foreach_instr(instr
, block
) {
7329 if (instr
->type
!= nir_instr_type_intrinsic
)
7332 nir_intrinsic_instr
*intrin
= nir_instr_as_intrinsic(instr
);
7333 if (intrin
->intrinsic
!= nir_intrinsic_load_interpolated_input
)
7336 /* Ignore WPOS; it doesn't require interpolation. */
7337 if (nir_intrinsic_base(intrin
) == VARYING_SLOT_POS
)
7340 intrin
= nir_instr_as_intrinsic(intrin
->src
[0].ssa
->parent_instr
);
7341 enum glsl_interp_mode interp
= (enum glsl_interp_mode
)
7342 nir_intrinsic_interp_mode(intrin
);
7343 nir_intrinsic_op bary_op
= intrin
->intrinsic
;
7344 enum brw_barycentric_mode bary
=
7345 brw_barycentric_mode(interp
, bary_op
);
7347 barycentric_interp_modes
|= 1 << bary
;
7349 if (devinfo
->needs_unlit_centroid_workaround
&&
7350 bary_op
== nir_intrinsic_load_barycentric_centroid
)
7351 barycentric_interp_modes
|= 1 << centroid_to_pixel(bary
);
7356 return barycentric_interp_modes
;
7360 brw_compute_flat_inputs(struct brw_wm_prog_data
*prog_data
,
7361 const nir_shader
*shader
)
7363 prog_data
->flat_inputs
= 0;
7365 nir_foreach_variable(var
, &shader
->inputs
) {
7366 unsigned slots
= glsl_count_attribute_slots(var
->type
, false);
7367 for (unsigned s
= 0; s
< slots
; s
++) {
7368 int input_index
= prog_data
->urb_setup
[var
->data
.location
+ s
];
7370 if (input_index
< 0)
7374 if (var
->data
.interpolation
== INTERP_MODE_FLAT
)
7375 prog_data
->flat_inputs
|= 1 << input_index
;
7381 computed_depth_mode(const nir_shader
*shader
)
7383 if (shader
->info
.outputs_written
& BITFIELD64_BIT(FRAG_RESULT_DEPTH
)) {
7384 switch (shader
->info
.fs
.depth_layout
) {
7385 case FRAG_DEPTH_LAYOUT_NONE
:
7386 case FRAG_DEPTH_LAYOUT_ANY
:
7387 return BRW_PSCDEPTH_ON
;
7388 case FRAG_DEPTH_LAYOUT_GREATER
:
7389 return BRW_PSCDEPTH_ON_GE
;
7390 case FRAG_DEPTH_LAYOUT_LESS
:
7391 return BRW_PSCDEPTH_ON_LE
;
7392 case FRAG_DEPTH_LAYOUT_UNCHANGED
:
7393 return BRW_PSCDEPTH_OFF
;
7396 return BRW_PSCDEPTH_OFF
;
7400 * Move load_interpolated_input with simple (payload-based) barycentric modes
7401 * to the top of the program so we don't emit multiple PLNs for the same input.
7403 * This works around CSE not being able to handle non-dominating cases
7409 * interpolate the same exact input
7412 * This should be replaced by global value numbering someday.
7415 move_interpolation_to_top(nir_shader
*nir
)
7417 bool progress
= false;
7419 nir_foreach_function(f
, nir
) {
7423 nir_block
*top
= nir_start_block(f
->impl
);
7424 exec_node
*cursor_node
= NULL
;
7426 nir_foreach_block(block
, f
->impl
) {
7430 nir_foreach_instr_safe(instr
, block
) {
7431 if (instr
->type
!= nir_instr_type_intrinsic
)
7434 nir_intrinsic_instr
*intrin
= nir_instr_as_intrinsic(instr
);
7435 if (intrin
->intrinsic
!= nir_intrinsic_load_interpolated_input
)
7437 nir_intrinsic_instr
*bary_intrinsic
=
7438 nir_instr_as_intrinsic(intrin
->src
[0].ssa
->parent_instr
);
7439 nir_intrinsic_op op
= bary_intrinsic
->intrinsic
;
7441 /* Leave interpolateAtSample/Offset() where they are. */
7442 if (op
== nir_intrinsic_load_barycentric_at_sample
||
7443 op
== nir_intrinsic_load_barycentric_at_offset
)
7446 nir_instr
*move
[3] = {
7447 &bary_intrinsic
->instr
,
7448 intrin
->src
[1].ssa
->parent_instr
,
7452 for (unsigned i
= 0; i
< ARRAY_SIZE(move
); i
++) {
7453 if (move
[i
]->block
!= top
) {
7454 move
[i
]->block
= top
;
7455 exec_node_remove(&move
[i
]->node
);
7457 exec_node_insert_after(cursor_node
, &move
[i
]->node
);
7459 exec_list_push_head(&top
->instr_list
, &move
[i
]->node
);
7461 cursor_node
= &move
[i
]->node
;
7467 nir_metadata_preserve(f
->impl
, (nir_metadata
)
7468 ((unsigned) nir_metadata_block_index
|
7469 (unsigned) nir_metadata_dominance
));
7476 * Demote per-sample barycentric intrinsics to centroid.
7478 * Useful when rendering to a non-multisampled buffer.
7481 demote_sample_qualifiers(nir_shader
*nir
)
7483 bool progress
= true;
7485 nir_foreach_function(f
, nir
) {
7490 nir_builder_init(&b
, f
->impl
);
7492 nir_foreach_block(block
, f
->impl
) {
7493 nir_foreach_instr_safe(instr
, block
) {
7494 if (instr
->type
!= nir_instr_type_intrinsic
)
7497 nir_intrinsic_instr
*intrin
= nir_instr_as_intrinsic(instr
);
7498 if (intrin
->intrinsic
!= nir_intrinsic_load_barycentric_sample
&&
7499 intrin
->intrinsic
!= nir_intrinsic_load_barycentric_at_sample
)
7502 b
.cursor
= nir_before_instr(instr
);
7503 nir_ssa_def
*centroid
=
7504 nir_load_barycentric(&b
, nir_intrinsic_load_barycentric_centroid
,
7505 nir_intrinsic_interp_mode(intrin
));
7506 nir_ssa_def_rewrite_uses(&intrin
->dest
.ssa
,
7507 nir_src_for_ssa(centroid
));
7508 nir_instr_remove(instr
);
7513 nir_metadata_preserve(f
->impl
, (nir_metadata
)
7514 ((unsigned) nir_metadata_block_index
|
7515 (unsigned) nir_metadata_dominance
));
7522 * Pre-gen6, the register file of the EUs was shared between threads,
7523 * and each thread used some subset allocated on a 16-register block
7524 * granularity. The unit states wanted these block counts.
7527 brw_register_blocks(int reg_count
)
7529 return ALIGN(reg_count
, 16) / 16 - 1;
7533 brw_compile_fs(const struct brw_compiler
*compiler
, void *log_data
,
7535 const struct brw_wm_prog_key
*key
,
7536 struct brw_wm_prog_data
*prog_data
,
7538 struct gl_program
*prog
,
7539 int shader_time_index8
, int shader_time_index16
,
7540 int shader_time_index32
, bool allow_spilling
,
7541 bool use_rep_send
, struct brw_vue_map
*vue_map
,
7544 const struct gen_device_info
*devinfo
= compiler
->devinfo
;
7546 shader
= brw_nir_apply_sampler_key(shader
, compiler
, &key
->tex
, true);
7547 brw_nir_lower_fs_inputs(shader
, devinfo
, key
);
7548 brw_nir_lower_fs_outputs(shader
);
7550 if (devinfo
->gen
< 6) {
7551 brw_setup_vue_interpolation(vue_map
, shader
, prog_data
, devinfo
);
7554 if (!key
->multisample_fbo
)
7555 NIR_PASS_V(shader
, demote_sample_qualifiers
);
7556 NIR_PASS_V(shader
, move_interpolation_to_top
);
7557 shader
= brw_postprocess_nir(shader
, compiler
, true);
7559 /* key->alpha_test_func means simulating alpha testing via discards,
7560 * so the shader definitely kills pixels.
7562 prog_data
->uses_kill
= shader
->info
.fs
.uses_discard
||
7563 key
->alpha_test_func
;
7564 prog_data
->uses_omask
= key
->multisample_fbo
&&
7565 shader
->info
.outputs_written
& BITFIELD64_BIT(FRAG_RESULT_SAMPLE_MASK
);
7566 prog_data
->computed_depth_mode
= computed_depth_mode(shader
);
7567 prog_data
->computed_stencil
=
7568 shader
->info
.outputs_written
& BITFIELD64_BIT(FRAG_RESULT_STENCIL
);
7570 prog_data
->persample_dispatch
=
7571 key
->multisample_fbo
&&
7572 (key
->persample_interp
||
7573 (shader
->info
.system_values_read
& (SYSTEM_BIT_SAMPLE_ID
|
7574 SYSTEM_BIT_SAMPLE_POS
)) ||
7575 shader
->info
.fs
.uses_sample_qualifier
||
7576 shader
->info
.outputs_read
);
7578 prog_data
->has_render_target_reads
= shader
->info
.outputs_read
!= 0ull;
7580 prog_data
->early_fragment_tests
= shader
->info
.fs
.early_fragment_tests
;
7581 prog_data
->post_depth_coverage
= shader
->info
.fs
.post_depth_coverage
;
7582 prog_data
->inner_coverage
= shader
->info
.fs
.inner_coverage
;
7584 prog_data
->barycentric_interp_modes
=
7585 brw_compute_barycentric_interp_modes(compiler
->devinfo
, shader
);
7587 cfg_t
*simd8_cfg
= NULL
, *simd16_cfg
= NULL
, *simd32_cfg
= NULL
;
7589 fs_visitor
v8(compiler
, log_data
, mem_ctx
, key
,
7590 &prog_data
->base
, prog
, shader
, 8,
7591 shader_time_index8
);
7592 if (!v8
.run_fs(allow_spilling
, false /* do_rep_send */)) {
7594 *error_str
= ralloc_strdup(mem_ctx
, v8
.fail_msg
);
7597 } else if (likely(!(INTEL_DEBUG
& DEBUG_NO8
))) {
7599 prog_data
->base
.dispatch_grf_start_reg
= v8
.payload
.num_regs
;
7600 prog_data
->reg_blocks_8
= brw_register_blocks(v8
.grf_used
);
7603 if (v8
.max_dispatch_width
>= 16 &&
7604 likely(!(INTEL_DEBUG
& DEBUG_NO16
) || use_rep_send
)) {
7605 /* Try a SIMD16 compile */
7606 fs_visitor
v16(compiler
, log_data
, mem_ctx
, key
,
7607 &prog_data
->base
, prog
, shader
, 16,
7608 shader_time_index16
);
7609 v16
.import_uniforms(&v8
);
7610 if (!v16
.run_fs(allow_spilling
, use_rep_send
)) {
7611 compiler
->shader_perf_log(log_data
,
7612 "SIMD16 shader failed to compile: %s",
7615 simd16_cfg
= v16
.cfg
;
7616 prog_data
->dispatch_grf_start_reg_16
= v16
.payload
.num_regs
;
7617 prog_data
->reg_blocks_16
= brw_register_blocks(v16
.grf_used
);
7621 /* Currently, the compiler only supports SIMD32 on SNB+ */
7622 if (v8
.max_dispatch_width
>= 32 && !use_rep_send
&&
7623 compiler
->devinfo
->gen
>= 6 &&
7624 unlikely(INTEL_DEBUG
& DEBUG_DO32
)) {
7625 /* Try a SIMD32 compile */
7626 fs_visitor
v32(compiler
, log_data
, mem_ctx
, key
,
7627 &prog_data
->base
, prog
, shader
, 32,
7628 shader_time_index32
);
7629 v32
.import_uniforms(&v8
);
7630 if (!v32
.run_fs(allow_spilling
, false)) {
7631 compiler
->shader_perf_log(log_data
,
7632 "SIMD32 shader failed to compile: %s",
7635 simd32_cfg
= v32
.cfg
;
7636 prog_data
->dispatch_grf_start_reg_32
= v32
.payload
.num_regs
;
7637 prog_data
->reg_blocks_32
= brw_register_blocks(v32
.grf_used
);
7641 /* When the caller requests a repclear shader, they want SIMD16-only */
7645 /* Prior to Iron Lake, the PS had a single shader offset with a jump table
7646 * at the top to select the shader. We've never implemented that.
7647 * Instead, we just give them exactly one shader and we pick the widest one
7650 if (compiler
->devinfo
->gen
< 5) {
7651 if (simd32_cfg
|| simd16_cfg
)
7657 /* If computed depth is enabled SNB only allows SIMD8. */
7658 if (compiler
->devinfo
->gen
== 6 &&
7659 prog_data
->computed_depth_mode
!= BRW_PSCDEPTH_OFF
)
7660 assert(simd16_cfg
== NULL
&& simd32_cfg
== NULL
);
7662 if (compiler
->devinfo
->gen
<= 5 && !simd8_cfg
) {
7663 /* Iron lake and earlier only have one Dispatch GRF start field. Make
7664 * the data available in the base prog data struct for convenience.
7667 prog_data
->base
.dispatch_grf_start_reg
=
7668 prog_data
->dispatch_grf_start_reg_16
;
7669 } else if (simd32_cfg
) {
7670 prog_data
->base
.dispatch_grf_start_reg
=
7671 prog_data
->dispatch_grf_start_reg_32
;
7675 if (prog_data
->persample_dispatch
) {
7676 /* Starting with SandyBridge (where we first get MSAA), the different
7677 * pixel dispatch combinations are grouped into classifications A
7678 * through F (SNB PRM Vol. 2 Part 1 Section 7.7.1). On all hardware
7679 * generations, the only configurations supporting persample dispatch
7680 * are are this in which only one dispatch width is enabled.
7682 if (simd32_cfg
|| simd16_cfg
)
7688 /* We have to compute the flat inputs after the visitor is finished running
7689 * because it relies on prog_data->urb_setup which is computed in
7690 * fs_visitor::calculate_urb_setup().
7692 brw_compute_flat_inputs(prog_data
, shader
);
7694 fs_generator
g(compiler
, log_data
, mem_ctx
, &prog_data
->base
,
7695 v8
.promoted_constants
, v8
.runtime_check_aads_emit
,
7696 MESA_SHADER_FRAGMENT
);
7698 if (unlikely(INTEL_DEBUG
& DEBUG_WM
)) {
7699 g
.enable_debug(ralloc_asprintf(mem_ctx
, "%s fragment shader %s",
7700 shader
->info
.label
?
7701 shader
->info
.label
: "unnamed",
7702 shader
->info
.name
));
7706 prog_data
->dispatch_8
= true;
7707 g
.generate_code(simd8_cfg
, 8);
7711 prog_data
->dispatch_16
= true;
7712 prog_data
->prog_offset_16
= g
.generate_code(simd16_cfg
, 16);
7716 prog_data
->dispatch_32
= true;
7717 prog_data
->prog_offset_32
= g
.generate_code(simd32_cfg
, 32);
7720 return g
.get_assembly();
7724 fs_visitor::emit_cs_work_group_id_setup()
7726 assert(stage
== MESA_SHADER_COMPUTE
);
7728 fs_reg
*reg
= new(this->mem_ctx
) fs_reg(vgrf(glsl_type::uvec3_type
));
7730 struct brw_reg
r0_1(retype(brw_vec1_grf(0, 1), BRW_REGISTER_TYPE_UD
));
7731 struct brw_reg
r0_6(retype(brw_vec1_grf(0, 6), BRW_REGISTER_TYPE_UD
));
7732 struct brw_reg
r0_7(retype(brw_vec1_grf(0, 7), BRW_REGISTER_TYPE_UD
));
7734 bld
.MOV(*reg
, r0_1
);
7735 bld
.MOV(offset(*reg
, bld
, 1), r0_6
);
7736 bld
.MOV(offset(*reg
, bld
, 2), r0_7
);
7742 fill_push_const_block_info(struct brw_push_const_block
*block
, unsigned dwords
)
7744 block
->dwords
= dwords
;
7745 block
->regs
= DIV_ROUND_UP(dwords
, 8);
7746 block
->size
= block
->regs
* 32;
7750 cs_fill_push_const_info(const struct gen_device_info
*devinfo
,
7751 struct brw_cs_prog_data
*cs_prog_data
)
7753 const struct brw_stage_prog_data
*prog_data
= &cs_prog_data
->base
;
7754 int subgroup_id_index
= get_subgroup_id_param_index(prog_data
);
7755 bool cross_thread_supported
= devinfo
->gen
> 7 || devinfo
->is_haswell
;
7757 /* The thread ID should be stored in the last param dword */
7758 assert(subgroup_id_index
== -1 ||
7759 subgroup_id_index
== (int)prog_data
->nr_params
- 1);
7761 unsigned cross_thread_dwords
, per_thread_dwords
;
7762 if (!cross_thread_supported
) {
7763 cross_thread_dwords
= 0u;
7764 per_thread_dwords
= prog_data
->nr_params
;
7765 } else if (subgroup_id_index
>= 0) {
7766 /* Fill all but the last register with cross-thread payload */
7767 cross_thread_dwords
= 8 * (subgroup_id_index
/ 8);
7768 per_thread_dwords
= prog_data
->nr_params
- cross_thread_dwords
;
7769 assert(per_thread_dwords
> 0 && per_thread_dwords
<= 8);
7771 /* Fill all data using cross-thread payload */
7772 cross_thread_dwords
= prog_data
->nr_params
;
7773 per_thread_dwords
= 0u;
7776 fill_push_const_block_info(&cs_prog_data
->push
.cross_thread
, cross_thread_dwords
);
7777 fill_push_const_block_info(&cs_prog_data
->push
.per_thread
, per_thread_dwords
);
7779 unsigned total_dwords
=
7780 (cs_prog_data
->push
.per_thread
.size
* cs_prog_data
->threads
+
7781 cs_prog_data
->push
.cross_thread
.size
) / 4;
7782 fill_push_const_block_info(&cs_prog_data
->push
.total
, total_dwords
);
7784 assert(cs_prog_data
->push
.cross_thread
.dwords
% 8 == 0 ||
7785 cs_prog_data
->push
.per_thread
.size
== 0);
7786 assert(cs_prog_data
->push
.cross_thread
.dwords
+
7787 cs_prog_data
->push
.per_thread
.dwords
==
7788 prog_data
->nr_params
);
7792 cs_set_simd_size(struct brw_cs_prog_data
*cs_prog_data
, unsigned size
)
7794 cs_prog_data
->simd_size
= size
;
7795 unsigned group_size
= cs_prog_data
->local_size
[0] *
7796 cs_prog_data
->local_size
[1] * cs_prog_data
->local_size
[2];
7797 cs_prog_data
->threads
= (group_size
+ size
- 1) / size
;
7801 compile_cs_to_nir(const struct brw_compiler
*compiler
,
7803 const struct brw_cs_prog_key
*key
,
7804 const nir_shader
*src_shader
,
7805 unsigned dispatch_width
)
7807 nir_shader
*shader
= nir_shader_clone(mem_ctx
, src_shader
);
7808 shader
= brw_nir_apply_sampler_key(shader
, compiler
, &key
->tex
, true);
7809 brw_nir_lower_cs_intrinsics(shader
, dispatch_width
);
7810 return brw_postprocess_nir(shader
, compiler
, true);
7814 brw_compile_cs(const struct brw_compiler
*compiler
, void *log_data
,
7816 const struct brw_cs_prog_key
*key
,
7817 struct brw_cs_prog_data
*prog_data
,
7818 const nir_shader
*src_shader
,
7819 int shader_time_index
,
7822 prog_data
->local_size
[0] = src_shader
->info
.cs
.local_size
[0];
7823 prog_data
->local_size
[1] = src_shader
->info
.cs
.local_size
[1];
7824 prog_data
->local_size
[2] = src_shader
->info
.cs
.local_size
[2];
7825 unsigned local_workgroup_size
=
7826 src_shader
->info
.cs
.local_size
[0] * src_shader
->info
.cs
.local_size
[1] *
7827 src_shader
->info
.cs
.local_size
[2];
7829 unsigned min_dispatch_width
=
7830 DIV_ROUND_UP(local_workgroup_size
, compiler
->devinfo
->max_cs_threads
);
7831 min_dispatch_width
= MAX2(8, min_dispatch_width
);
7832 min_dispatch_width
= util_next_power_of_two(min_dispatch_width
);
7833 assert(min_dispatch_width
<= 32);
7835 fs_visitor
*v8
= NULL
, *v16
= NULL
, *v32
= NULL
;
7837 const char *fail_msg
= NULL
;
7838 unsigned promoted_constants
= 0;
7840 /* Now the main event: Visit the shader IR and generate our CS IR for it.
7842 if (min_dispatch_width
<= 8) {
7843 nir_shader
*nir8
= compile_cs_to_nir(compiler
, mem_ctx
, key
,
7845 v8
= new fs_visitor(compiler
, log_data
, mem_ctx
, key
, &prog_data
->base
,
7846 NULL
, /* Never used in core profile */
7847 nir8
, 8, shader_time_index
);
7848 if (!v8
->run_cs(min_dispatch_width
)) {
7849 fail_msg
= v8
->fail_msg
;
7851 /* We should always be able to do SIMD32 for compute shaders */
7852 assert(v8
->max_dispatch_width
>= 32);
7855 cs_set_simd_size(prog_data
, 8);
7856 cs_fill_push_const_info(compiler
->devinfo
, prog_data
);
7857 promoted_constants
= v8
->promoted_constants
;
7861 if (likely(!(INTEL_DEBUG
& DEBUG_NO16
)) &&
7862 !fail_msg
&& min_dispatch_width
<= 16) {
7863 /* Try a SIMD16 compile */
7864 nir_shader
*nir16
= compile_cs_to_nir(compiler
, mem_ctx
, key
,
7866 v16
= new fs_visitor(compiler
, log_data
, mem_ctx
, key
, &prog_data
->base
,
7867 NULL
, /* Never used in core profile */
7868 nir16
, 16, shader_time_index
);
7870 v16
->import_uniforms(v8
);
7872 if (!v16
->run_cs(min_dispatch_width
)) {
7873 compiler
->shader_perf_log(log_data
,
7874 "SIMD16 shader failed to compile: %s",
7878 "Couldn't generate SIMD16 program and not "
7879 "enough threads for SIMD8";
7882 /* We should always be able to do SIMD32 for compute shaders */
7883 assert(v16
->max_dispatch_width
>= 32);
7886 cs_set_simd_size(prog_data
, 16);
7887 cs_fill_push_const_info(compiler
->devinfo
, prog_data
);
7888 promoted_constants
= v16
->promoted_constants
;
7892 /* We should always be able to do SIMD32 for compute shaders */
7893 assert(!v16
|| v16
->max_dispatch_width
>= 32);
7895 if (!fail_msg
&& (min_dispatch_width
> 16 || (INTEL_DEBUG
& DEBUG_DO32
))) {
7896 /* Try a SIMD32 compile */
7897 nir_shader
*nir32
= compile_cs_to_nir(compiler
, mem_ctx
, key
,
7899 v32
= new fs_visitor(compiler
, log_data
, mem_ctx
, key
, &prog_data
->base
,
7900 NULL
, /* Never used in core profile */
7901 nir32
, 32, shader_time_index
);
7903 v32
->import_uniforms(v8
);
7905 v32
->import_uniforms(v16
);
7907 if (!v32
->run_cs(min_dispatch_width
)) {
7908 compiler
->shader_perf_log(log_data
,
7909 "SIMD32 shader failed to compile: %s",
7913 "Couldn't generate SIMD32 program and not "
7914 "enough threads for SIMD16";
7918 cs_set_simd_size(prog_data
, 32);
7919 cs_fill_push_const_info(compiler
->devinfo
, prog_data
);
7920 promoted_constants
= v32
->promoted_constants
;
7924 const unsigned *ret
= NULL
;
7925 if (unlikely(cfg
== NULL
)) {
7928 *error_str
= ralloc_strdup(mem_ctx
, fail_msg
);
7930 fs_generator
g(compiler
, log_data
, mem_ctx
, &prog_data
->base
,
7931 promoted_constants
, false, MESA_SHADER_COMPUTE
);
7932 if (INTEL_DEBUG
& DEBUG_CS
) {
7933 char *name
= ralloc_asprintf(mem_ctx
, "%s compute shader %s",
7934 src_shader
->info
.label
?
7935 src_shader
->info
.label
: "unnamed",
7936 src_shader
->info
.name
);
7937 g
.enable_debug(name
);
7940 g
.generate_code(cfg
, prog_data
->simd_size
);
7942 ret
= g
.get_assembly();
7953 * Test the dispatch mask packing assumptions of
7954 * brw_stage_has_packed_dispatch(). Call this from e.g. the top of
7955 * fs_visitor::emit_nir_code() to cause a GPU hang if any shader invocation is
7956 * executed with an unexpected dispatch mask.
7959 brw_fs_test_dispatch_packing(const fs_builder
&bld
)
7961 const gl_shader_stage stage
= bld
.shader
->stage
;
7963 if (brw_stage_has_packed_dispatch(bld
.shader
->devinfo
, stage
,
7964 bld
.shader
->stage_prog_data
)) {
7965 const fs_builder ubld
= bld
.exec_all().group(1, 0);
7966 const fs_reg tmp
= component(bld
.vgrf(BRW_REGISTER_TYPE_UD
), 0);
7967 const fs_reg mask
= (stage
== MESA_SHADER_FRAGMENT
? brw_vmask_reg() :
7970 ubld
.ADD(tmp
, mask
, brw_imm_ud(1));
7971 ubld
.AND(tmp
, mask
, tmp
);
7973 /* This will loop forever if the dispatch mask doesn't have the expected
7974 * form '2^n-1', in which case tmp will be non-zero.
7976 bld
.emit(BRW_OPCODE_DO
);
7977 bld
.CMP(bld
.null_reg_ud(), tmp
, brw_imm_ud(0), BRW_CONDITIONAL_NZ
);
7978 set_predicate(BRW_PREDICATE_NORMAL
, bld
.emit(BRW_OPCODE_WHILE
));