2 * Copyright © 2015 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
27 #include "anv_private.h"
28 #include "vk_format_info.h"
30 #include "util/fast_idiv_by_const.h"
32 #include "common/gen_aux_map.h"
33 #include "common/gen_l3_config.h"
34 #include "genxml/gen_macros.h"
35 #include "genxml/genX_pack.h"
37 /* We reserve GPR 14 and 15 for conditional rendering */
38 #define GEN_MI_BUILDER_NUM_ALLOC_GPRS 14
39 #define __gen_get_batch_dwords anv_batch_emit_dwords
40 #define __gen_address_offset anv_address_add
41 #include "common/gen_mi_builder.h"
44 emit_lri(struct anv_batch
*batch
, uint32_t reg
, uint32_t imm
)
46 anv_batch_emit(batch
, GENX(MI_LOAD_REGISTER_IMM
), lri
) {
47 lri
.RegisterOffset
= reg
;
53 genX(cmd_buffer_emit_state_base_address
)(struct anv_cmd_buffer
*cmd_buffer
)
55 struct anv_device
*device
= cmd_buffer
->device
;
56 uint32_t mocs
= device
->isl_dev
.mocs
.internal
;
58 /* If we are emitting a new state base address we probably need to re-emit
61 cmd_buffer
->state
.descriptors_dirty
|= ~0;
63 /* Emit a render target cache flush.
65 * This isn't documented anywhere in the PRM. However, it seems to be
66 * necessary prior to changing the surface state base adress. Without
67 * this, we get GPU hangs when using multi-level command buffers which
68 * clear depth, reset state base address, and then go render stuff.
70 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
71 pc
.DCFlushEnable
= true;
72 pc
.RenderTargetCacheFlushEnable
= true;
73 pc
.CommandStreamerStallEnable
= true;
75 pc
.TileCacheFlushEnable
= true;
79 anv_batch_emit(&cmd_buffer
->batch
, GENX(STATE_BASE_ADDRESS
), sba
) {
80 sba
.GeneralStateBaseAddress
= (struct anv_address
) { NULL
, 0 };
81 sba
.GeneralStateMOCS
= mocs
;
82 sba
.GeneralStateBaseAddressModifyEnable
= true;
84 sba
.StatelessDataPortAccessMOCS
= mocs
;
86 sba
.SurfaceStateBaseAddress
=
87 anv_cmd_buffer_surface_base_address(cmd_buffer
);
88 sba
.SurfaceStateMOCS
= mocs
;
89 sba
.SurfaceStateBaseAddressModifyEnable
= true;
91 sba
.DynamicStateBaseAddress
=
92 (struct anv_address
) { device
->dynamic_state_pool
.block_pool
.bo
, 0 };
93 sba
.DynamicStateMOCS
= mocs
;
94 sba
.DynamicStateBaseAddressModifyEnable
= true;
96 sba
.IndirectObjectBaseAddress
= (struct anv_address
) { NULL
, 0 };
97 sba
.IndirectObjectMOCS
= mocs
;
98 sba
.IndirectObjectBaseAddressModifyEnable
= true;
100 sba
.InstructionBaseAddress
=
101 (struct anv_address
) { device
->instruction_state_pool
.block_pool
.bo
, 0 };
102 sba
.InstructionMOCS
= mocs
;
103 sba
.InstructionBaseAddressModifyEnable
= true;
106 /* Broadwell requires that we specify a buffer size for a bunch of
107 * these fields. However, since we will be growing the BO's live, we
108 * just set them all to the maximum.
110 sba
.GeneralStateBufferSize
= 0xfffff;
111 sba
.GeneralStateBufferSizeModifyEnable
= true;
112 sba
.DynamicStateBufferSize
= 0xfffff;
113 sba
.DynamicStateBufferSizeModifyEnable
= true;
114 sba
.IndirectObjectBufferSize
= 0xfffff;
115 sba
.IndirectObjectBufferSizeModifyEnable
= true;
116 sba
.InstructionBufferSize
= 0xfffff;
117 sba
.InstructionBuffersizeModifyEnable
= true;
119 /* On gen7, we have upper bounds instead. According to the docs,
120 * setting an upper bound of zero means that no bounds checking is
121 * performed so, in theory, we should be able to leave them zero.
122 * However, border color is broken and the GPU bounds-checks anyway.
123 * To avoid this and other potential problems, we may as well set it
126 sba
.GeneralStateAccessUpperBound
=
127 (struct anv_address
) { .bo
= NULL
, .offset
= 0xfffff000 };
128 sba
.GeneralStateAccessUpperBoundModifyEnable
= true;
129 sba
.DynamicStateAccessUpperBound
=
130 (struct anv_address
) { .bo
= NULL
, .offset
= 0xfffff000 };
131 sba
.DynamicStateAccessUpperBoundModifyEnable
= true;
132 sba
.InstructionAccessUpperBound
=
133 (struct anv_address
) { .bo
= NULL
, .offset
= 0xfffff000 };
134 sba
.InstructionAccessUpperBoundModifyEnable
= true;
137 if (cmd_buffer
->device
->instance
->physicalDevice
.use_softpin
) {
138 sba
.BindlessSurfaceStateBaseAddress
= (struct anv_address
) {
139 .bo
= device
->surface_state_pool
.block_pool
.bo
,
142 sba
.BindlessSurfaceStateSize
= (1 << 20) - 1;
144 sba
.BindlessSurfaceStateBaseAddress
= ANV_NULL_ADDRESS
;
145 sba
.BindlessSurfaceStateSize
= 0;
147 sba
.BindlessSurfaceStateMOCS
= mocs
;
148 sba
.BindlessSurfaceStateBaseAddressModifyEnable
= true;
151 sba
.BindlessSamplerStateBaseAddress
= (struct anv_address
) { NULL
, 0 };
152 sba
.BindlessSamplerStateMOCS
= mocs
;
153 sba
.BindlessSamplerStateBaseAddressModifyEnable
= true;
154 sba
.BindlessSamplerStateBufferSize
= 0;
158 /* After re-setting the surface state base address, we have to do some
159 * cache flusing so that the sampler engine will pick up the new
160 * SURFACE_STATE objects and binding tables. From the Broadwell PRM,
161 * Shared Function > 3D Sampler > State > State Caching (page 96):
163 * Coherency with system memory in the state cache, like the texture
164 * cache is handled partially by software. It is expected that the
165 * command stream or shader will issue Cache Flush operation or
166 * Cache_Flush sampler message to ensure that the L1 cache remains
167 * coherent with system memory.
171 * Whenever the value of the Dynamic_State_Base_Addr,
172 * Surface_State_Base_Addr are altered, the L1 state cache must be
173 * invalidated to ensure the new surface or sampler state is fetched
174 * from system memory.
176 * The PIPE_CONTROL command has a "State Cache Invalidation Enable" bit
177 * which, according the PIPE_CONTROL instruction documentation in the
180 * Setting this bit is independent of any other bit in this packet.
181 * This bit controls the invalidation of the L1 and L2 state caches
182 * at the top of the pipe i.e. at the parsing time.
184 * Unfortunately, experimentation seems to indicate that state cache
185 * invalidation through a PIPE_CONTROL does nothing whatsoever in
186 * regards to surface state and binding tables. In stead, it seems that
187 * invalidating the texture cache is what is actually needed.
189 * XXX: As far as we have been able to determine through
190 * experimentation, shows that flush the texture cache appears to be
191 * sufficient. The theory here is that all of the sampling/rendering
192 * units cache the binding table in the texture cache. However, we have
193 * yet to be able to actually confirm this.
195 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
196 pc
.TextureCacheInvalidationEnable
= true;
197 pc
.ConstantCacheInvalidationEnable
= true;
198 pc
.StateCacheInvalidationEnable
= true;
203 add_surface_reloc(struct anv_cmd_buffer
*cmd_buffer
,
204 struct anv_state state
, struct anv_address addr
)
206 const struct isl_device
*isl_dev
= &cmd_buffer
->device
->isl_dev
;
209 anv_reloc_list_add(&cmd_buffer
->surface_relocs
, &cmd_buffer
->pool
->alloc
,
210 state
.offset
+ isl_dev
->ss
.addr_offset
,
211 addr
.bo
, addr
.offset
, NULL
);
212 if (result
!= VK_SUCCESS
)
213 anv_batch_set_error(&cmd_buffer
->batch
, result
);
217 add_surface_state_relocs(struct anv_cmd_buffer
*cmd_buffer
,
218 struct anv_surface_state state
)
220 const struct isl_device
*isl_dev
= &cmd_buffer
->device
->isl_dev
;
222 assert(!anv_address_is_null(state
.address
));
223 add_surface_reloc(cmd_buffer
, state
.state
, state
.address
);
225 if (!anv_address_is_null(state
.aux_address
)) {
227 anv_reloc_list_add(&cmd_buffer
->surface_relocs
,
228 &cmd_buffer
->pool
->alloc
,
229 state
.state
.offset
+ isl_dev
->ss
.aux_addr_offset
,
230 state
.aux_address
.bo
,
231 state
.aux_address
.offset
,
233 if (result
!= VK_SUCCESS
)
234 anv_batch_set_error(&cmd_buffer
->batch
, result
);
237 if (!anv_address_is_null(state
.clear_address
)) {
239 anv_reloc_list_add(&cmd_buffer
->surface_relocs
,
240 &cmd_buffer
->pool
->alloc
,
242 isl_dev
->ss
.clear_color_state_offset
,
243 state
.clear_address
.bo
,
244 state
.clear_address
.offset
,
246 if (result
!= VK_SUCCESS
)
247 anv_batch_set_error(&cmd_buffer
->batch
, result
);
252 color_attachment_compute_aux_usage(struct anv_device
* device
,
253 struct anv_cmd_state
* cmd_state
,
254 uint32_t att
, VkRect2D render_area
,
255 union isl_color_value
*fast_clear_color
)
257 struct anv_attachment_state
*att_state
= &cmd_state
->attachments
[att
];
258 struct anv_image_view
*iview
= cmd_state
->attachments
[att
].image_view
;
260 assert(iview
->n_planes
== 1);
262 if (iview
->planes
[0].isl
.base_array_layer
>=
263 anv_image_aux_layers(iview
->image
, VK_IMAGE_ASPECT_COLOR_BIT
,
264 iview
->planes
[0].isl
.base_level
)) {
265 /* There is no aux buffer which corresponds to the level and layer(s)
268 att_state
->aux_usage
= ISL_AUX_USAGE_NONE
;
269 att_state
->input_aux_usage
= ISL_AUX_USAGE_NONE
;
270 att_state
->fast_clear
= false;
274 att_state
->aux_usage
=
275 anv_layout_to_aux_usage(&device
->info
, iview
->image
,
276 VK_IMAGE_ASPECT_COLOR_BIT
,
277 VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
);
279 /* If we don't have aux, then we should have returned early in the layer
280 * check above. If we got here, we must have something.
282 assert(att_state
->aux_usage
!= ISL_AUX_USAGE_NONE
);
284 if (att_state
->aux_usage
== ISL_AUX_USAGE_CCS_E
||
285 att_state
->aux_usage
== ISL_AUX_USAGE_MCS
) {
286 att_state
->input_aux_usage
= att_state
->aux_usage
;
288 /* From the Sky Lake PRM, RENDER_SURFACE_STATE::AuxiliarySurfaceMode:
290 * "If Number of Multisamples is MULTISAMPLECOUNT_1, AUX_CCS_D
291 * setting is only allowed if Surface Format supported for Fast
292 * Clear. In addition, if the surface is bound to the sampling
293 * engine, Surface Format must be supported for Render Target
294 * Compression for surfaces bound to the sampling engine."
296 * In other words, we can only sample from a fast-cleared image if it
297 * also supports color compression.
299 if (isl_format_supports_ccs_e(&device
->info
, iview
->planes
[0].isl
.format
) &&
300 isl_format_supports_ccs_d(&device
->info
, iview
->planes
[0].isl
.format
)) {
301 att_state
->input_aux_usage
= ISL_AUX_USAGE_CCS_D
;
303 /* While fast-clear resolves and partial resolves are fairly cheap in the
304 * case where you render to most of the pixels, full resolves are not
305 * because they potentially involve reading and writing the entire
306 * framebuffer. If we can't texture with CCS_E, we should leave it off and
307 * limit ourselves to fast clears.
309 if (cmd_state
->pass
->attachments
[att
].first_subpass_layout
==
310 VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
) {
311 anv_perf_warn(device
->instance
, iview
->image
,
312 "Not temporarily enabling CCS_E.");
315 att_state
->input_aux_usage
= ISL_AUX_USAGE_NONE
;
319 assert(iview
->image
->planes
[0].aux_surface
.isl
.usage
&
320 (ISL_SURF_USAGE_CCS_BIT
| ISL_SURF_USAGE_MCS_BIT
));
322 union isl_color_value clear_color
= {};
323 anv_clear_color_from_att_state(&clear_color
, att_state
, iview
);
325 att_state
->clear_color_is_zero_one
=
326 isl_color_value_is_zero_one(clear_color
, iview
->planes
[0].isl
.format
);
327 att_state
->clear_color_is_zero
=
328 isl_color_value_is_zero(clear_color
, iview
->planes
[0].isl
.format
);
330 if (att_state
->pending_clear_aspects
== VK_IMAGE_ASPECT_COLOR_BIT
) {
331 /* Start by getting the fast clear type. We use the first subpass
332 * layout here because we don't want to fast-clear if the first subpass
333 * to use the attachment can't handle fast-clears.
335 enum anv_fast_clear_type fast_clear_type
=
336 anv_layout_to_fast_clear_type(&device
->info
, iview
->image
,
337 VK_IMAGE_ASPECT_COLOR_BIT
,
338 cmd_state
->pass
->attachments
[att
].first_subpass_layout
);
339 switch (fast_clear_type
) {
340 case ANV_FAST_CLEAR_NONE
:
341 att_state
->fast_clear
= false;
343 case ANV_FAST_CLEAR_DEFAULT_VALUE
:
344 att_state
->fast_clear
= att_state
->clear_color_is_zero
;
346 case ANV_FAST_CLEAR_ANY
:
347 att_state
->fast_clear
= true;
351 /* Potentially, we could do partial fast-clears but doing so has crazy
352 * alignment restrictions. It's easier to just restrict to full size
353 * fast clears for now.
355 if (render_area
.offset
.x
!= 0 ||
356 render_area
.offset
.y
!= 0 ||
357 render_area
.extent
.width
!= iview
->extent
.width
||
358 render_area
.extent
.height
!= iview
->extent
.height
)
359 att_state
->fast_clear
= false;
361 /* On Broadwell and earlier, we can only handle 0/1 clear colors */
362 if (GEN_GEN
<= 8 && !att_state
->clear_color_is_zero_one
)
363 att_state
->fast_clear
= false;
365 /* We only allow fast clears to the first slice of an image (level 0,
366 * layer 0) and only for the entire slice. This guarantees us that, at
367 * any given time, there is only one clear color on any given image at
368 * any given time. At the time of our testing (Jan 17, 2018), there
369 * were no known applications which would benefit from fast-clearing
370 * more than just the first slice.
372 if (att_state
->fast_clear
&&
373 (iview
->planes
[0].isl
.base_level
> 0 ||
374 iview
->planes
[0].isl
.base_array_layer
> 0)) {
375 anv_perf_warn(device
->instance
, iview
->image
,
376 "Rendering with multi-lod or multi-layer framebuffer "
377 "with LOAD_OP_LOAD and baseMipLevel > 0 or "
378 "baseArrayLayer > 0. Not fast clearing.");
379 att_state
->fast_clear
= false;
380 } else if (att_state
->fast_clear
&& cmd_state
->framebuffer
->layers
> 1) {
381 anv_perf_warn(device
->instance
, iview
->image
,
382 "Rendering to a multi-layer framebuffer with "
383 "LOAD_OP_CLEAR. Only fast-clearing the first slice");
386 if (att_state
->fast_clear
)
387 *fast_clear_color
= clear_color
;
389 att_state
->fast_clear
= false;
394 depth_stencil_attachment_compute_aux_usage(struct anv_device
*device
,
395 struct anv_cmd_state
*cmd_state
,
396 uint32_t att
, VkRect2D render_area
)
398 struct anv_render_pass_attachment
*pass_att
=
399 &cmd_state
->pass
->attachments
[att
];
400 struct anv_attachment_state
*att_state
= &cmd_state
->attachments
[att
];
401 struct anv_image_view
*iview
= cmd_state
->attachments
[att
].image_view
;
403 /* These will be initialized after the first subpass transition. */
404 att_state
->aux_usage
= ISL_AUX_USAGE_NONE
;
405 att_state
->input_aux_usage
= ISL_AUX_USAGE_NONE
;
408 /* We don't do any HiZ or depth fast-clears on gen7 yet */
409 att_state
->fast_clear
= false;
413 if (!(att_state
->pending_clear_aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
)) {
414 /* If we're just clearing stencil, we can always HiZ clear */
415 att_state
->fast_clear
= true;
419 /* Default to false for now */
420 att_state
->fast_clear
= false;
422 /* We must have depth in order to have HiZ */
423 if (!(iview
->image
->aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
))
426 const enum isl_aux_usage first_subpass_aux_usage
=
427 anv_layout_to_aux_usage(&device
->info
, iview
->image
,
428 VK_IMAGE_ASPECT_DEPTH_BIT
,
429 pass_att
->first_subpass_layout
);
430 if (!blorp_can_hiz_clear_depth(&device
->info
,
431 &iview
->image
->planes
[0].surface
.isl
,
432 first_subpass_aux_usage
,
433 iview
->planes
[0].isl
.base_level
,
434 iview
->planes
[0].isl
.base_array_layer
,
435 render_area
.offset
.x
,
436 render_area
.offset
.y
,
437 render_area
.offset
.x
+
438 render_area
.extent
.width
,
439 render_area
.offset
.y
+
440 render_area
.extent
.height
))
443 if (att_state
->clear_value
.depthStencil
.depth
!= ANV_HZ_FC_VAL
)
446 if (GEN_GEN
== 8 && anv_can_sample_with_hiz(&device
->info
, iview
->image
)) {
447 /* Only gen9+ supports returning ANV_HZ_FC_VAL when sampling a
448 * fast-cleared portion of a HiZ buffer. Testing has revealed that Gen8
449 * only supports returning 0.0f. Gens prior to gen8 do not support this
455 /* If we got here, then we can fast clear */
456 att_state
->fast_clear
= true;
460 need_input_attachment_state(const struct anv_render_pass_attachment
*att
)
462 if (!(att
->usage
& VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT
))
465 /* We only allocate input attachment states for color surfaces. Compression
466 * is not yet enabled for depth textures and stencil doesn't allow
467 * compression so we can just use the texture surface state from the view.
469 return vk_format_is_color(att
->format
);
472 /* Transitions a HiZ-enabled depth buffer from one layout to another. Unless
473 * the initial layout is undefined, the HiZ buffer and depth buffer will
474 * represent the same data at the end of this operation.
477 transition_depth_buffer(struct anv_cmd_buffer
*cmd_buffer
,
478 const struct anv_image
*image
,
479 VkImageLayout initial_layout
,
480 VkImageLayout final_layout
)
482 const bool hiz_enabled
= ISL_AUX_USAGE_HIZ
==
483 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, image
,
484 VK_IMAGE_ASPECT_DEPTH_BIT
, initial_layout
);
485 const bool enable_hiz
= ISL_AUX_USAGE_HIZ
==
486 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, image
,
487 VK_IMAGE_ASPECT_DEPTH_BIT
, final_layout
);
489 enum isl_aux_op hiz_op
;
490 if (hiz_enabled
&& !enable_hiz
) {
491 hiz_op
= ISL_AUX_OP_FULL_RESOLVE
;
492 } else if (!hiz_enabled
&& enable_hiz
) {
493 hiz_op
= ISL_AUX_OP_AMBIGUATE
;
495 assert(hiz_enabled
== enable_hiz
);
496 /* If the same buffer will be used, no resolves are necessary. */
497 hiz_op
= ISL_AUX_OP_NONE
;
500 if (hiz_op
!= ISL_AUX_OP_NONE
)
501 anv_image_hiz_op(cmd_buffer
, image
, VK_IMAGE_ASPECT_DEPTH_BIT
,
506 vk_image_layout_stencil_write_optimal(VkImageLayout layout
)
508 return layout
== VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL
||
509 layout
== VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL
||
510 layout
== VK_IMAGE_LAYOUT_STENCIL_ATTACHMENT_OPTIMAL_KHR
;
513 /* Transitions a HiZ-enabled depth buffer from one layout to another. Unless
514 * the initial layout is undefined, the HiZ buffer and depth buffer will
515 * represent the same data at the end of this operation.
518 transition_stencil_buffer(struct anv_cmd_buffer
*cmd_buffer
,
519 const struct anv_image
*image
,
520 uint32_t base_level
, uint32_t level_count
,
521 uint32_t base_layer
, uint32_t layer_count
,
522 VkImageLayout initial_layout
,
523 VkImageLayout final_layout
)
526 uint32_t plane
= anv_image_aspect_to_plane(image
->aspects
,
527 VK_IMAGE_ASPECT_STENCIL_BIT
);
529 /* On gen7, we have to store a texturable version of the stencil buffer in
530 * a shadow whenever VK_IMAGE_USAGE_SAMPLED_BIT is set and copy back and
531 * forth at strategic points. Stencil writes are only allowed in following
534 * - VK_IMAGE_LAYOUT_GENERAL
535 * - VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
536 * - VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL
537 * - VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL
538 * - VK_IMAGE_LAYOUT_STENCIL_ATTACHMENT_OPTIMAL_KHR
540 * For general, we have no nice opportunity to transition so we do the copy
541 * to the shadow unconditionally at the end of the subpass. For transfer
542 * destinations, we can update it as part of the transfer op. For the other
543 * layouts, we delay the copy until a transition into some other layout.
545 if (image
->planes
[plane
].shadow_surface
.isl
.size_B
> 0 &&
546 vk_image_layout_stencil_write_optimal(initial_layout
) &&
547 !vk_image_layout_stencil_write_optimal(final_layout
)) {
548 anv_image_copy_to_shadow(cmd_buffer
, image
,
549 VK_IMAGE_ASPECT_STENCIL_BIT
,
550 base_level
, level_count
,
551 base_layer
, layer_count
);
553 #endif /* GEN_GEN == 7 */
556 #define MI_PREDICATE_SRC0 0x2400
557 #define MI_PREDICATE_SRC1 0x2408
558 #define MI_PREDICATE_RESULT 0x2418
561 set_image_compressed_bit(struct anv_cmd_buffer
*cmd_buffer
,
562 const struct anv_image
*image
,
563 VkImageAspectFlagBits aspect
,
565 uint32_t base_layer
, uint32_t layer_count
,
568 uint32_t plane
= anv_image_aspect_to_plane(image
->aspects
, aspect
);
570 /* We only have compression tracking for CCS_E */
571 if (image
->planes
[plane
].aux_usage
!= ISL_AUX_USAGE_CCS_E
)
574 for (uint32_t a
= 0; a
< layer_count
; a
++) {
575 uint32_t layer
= base_layer
+ a
;
576 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_STORE_DATA_IMM
), sdi
) {
577 sdi
.Address
= anv_image_get_compression_state_addr(cmd_buffer
->device
,
580 sdi
.ImmediateData
= compressed
? UINT32_MAX
: 0;
586 set_image_fast_clear_state(struct anv_cmd_buffer
*cmd_buffer
,
587 const struct anv_image
*image
,
588 VkImageAspectFlagBits aspect
,
589 enum anv_fast_clear_type fast_clear
)
591 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_STORE_DATA_IMM
), sdi
) {
592 sdi
.Address
= anv_image_get_fast_clear_type_addr(cmd_buffer
->device
,
594 sdi
.ImmediateData
= fast_clear
;
597 /* Whenever we have fast-clear, we consider that slice to be compressed.
598 * This makes building predicates much easier.
600 if (fast_clear
!= ANV_FAST_CLEAR_NONE
)
601 set_image_compressed_bit(cmd_buffer
, image
, aspect
, 0, 0, 1, true);
604 /* This is only really practical on haswell and above because it requires
605 * MI math in order to get it correct.
607 #if GEN_GEN >= 8 || GEN_IS_HASWELL
609 anv_cmd_compute_resolve_predicate(struct anv_cmd_buffer
*cmd_buffer
,
610 const struct anv_image
*image
,
611 VkImageAspectFlagBits aspect
,
612 uint32_t level
, uint32_t array_layer
,
613 enum isl_aux_op resolve_op
,
614 enum anv_fast_clear_type fast_clear_supported
)
616 struct gen_mi_builder b
;
617 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
619 const struct gen_mi_value fast_clear_type
=
620 gen_mi_mem32(anv_image_get_fast_clear_type_addr(cmd_buffer
->device
,
623 if (resolve_op
== ISL_AUX_OP_FULL_RESOLVE
) {
624 /* In this case, we're doing a full resolve which means we want the
625 * resolve to happen if any compression (including fast-clears) is
628 * In order to simplify the logic a bit, we make the assumption that,
629 * if the first slice has been fast-cleared, it is also marked as
630 * compressed. See also set_image_fast_clear_state.
632 const struct gen_mi_value compression_state
=
633 gen_mi_mem32(anv_image_get_compression_state_addr(cmd_buffer
->device
,
635 level
, array_layer
));
636 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
),
638 gen_mi_store(&b
, compression_state
, gen_mi_imm(0));
640 if (level
== 0 && array_layer
== 0) {
641 /* If the predicate is true, we want to write 0 to the fast clear type
642 * and, if it's false, leave it alone. We can do this by writing
644 * clear_type = clear_type & ~predicate;
646 struct gen_mi_value new_fast_clear_type
=
647 gen_mi_iand(&b
, fast_clear_type
,
648 gen_mi_inot(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
)));
649 gen_mi_store(&b
, fast_clear_type
, new_fast_clear_type
);
651 } else if (level
== 0 && array_layer
== 0) {
652 /* In this case, we are doing a partial resolve to get rid of fast-clear
653 * colors. We don't care about the compression state but we do care
654 * about how much fast clear is allowed by the final layout.
656 assert(resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
);
657 assert(fast_clear_supported
< ANV_FAST_CLEAR_ANY
);
659 /* We need to compute (fast_clear_supported < image->fast_clear) */
660 struct gen_mi_value pred
=
661 gen_mi_ult(&b
, gen_mi_imm(fast_clear_supported
), fast_clear_type
);
662 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
),
663 gen_mi_value_ref(&b
, pred
));
665 /* If the predicate is true, we want to write 0 to the fast clear type
666 * and, if it's false, leave it alone. We can do this by writing
668 * clear_type = clear_type & ~predicate;
670 struct gen_mi_value new_fast_clear_type
=
671 gen_mi_iand(&b
, fast_clear_type
, gen_mi_inot(&b
, pred
));
672 gen_mi_store(&b
, fast_clear_type
, new_fast_clear_type
);
674 /* In this case, we're trying to do a partial resolve on a slice that
675 * doesn't have clear color. There's nothing to do.
677 assert(resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
);
681 /* Set src1 to 0 and use a != condition */
682 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC1
), gen_mi_imm(0));
684 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
685 mip
.LoadOperation
= LOAD_LOADINV
;
686 mip
.CombineOperation
= COMBINE_SET
;
687 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
690 #endif /* GEN_GEN >= 8 || GEN_IS_HASWELL */
694 anv_cmd_simple_resolve_predicate(struct anv_cmd_buffer
*cmd_buffer
,
695 const struct anv_image
*image
,
696 VkImageAspectFlagBits aspect
,
697 uint32_t level
, uint32_t array_layer
,
698 enum isl_aux_op resolve_op
,
699 enum anv_fast_clear_type fast_clear_supported
)
701 struct gen_mi_builder b
;
702 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
704 struct gen_mi_value fast_clear_type_mem
=
705 gen_mi_mem32(anv_image_get_fast_clear_type_addr(cmd_buffer
->device
,
708 /* This only works for partial resolves and only when the clear color is
709 * all or nothing. On the upside, this emits less command streamer code
710 * and works on Ivybridge and Bay Trail.
712 assert(resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
);
713 assert(fast_clear_supported
!= ANV_FAST_CLEAR_ANY
);
715 /* We don't support fast clears on anything other than the first slice. */
716 if (level
> 0 || array_layer
> 0)
719 /* On gen8, we don't have a concept of default clear colors because we
720 * can't sample from CCS surfaces. It's enough to just load the fast clear
721 * state into the predicate register.
723 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
), fast_clear_type_mem
);
724 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC1
), gen_mi_imm(0));
725 gen_mi_store(&b
, fast_clear_type_mem
, gen_mi_imm(0));
727 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
728 mip
.LoadOperation
= LOAD_LOADINV
;
729 mip
.CombineOperation
= COMBINE_SET
;
730 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
733 #endif /* GEN_GEN <= 8 */
736 anv_cmd_predicated_ccs_resolve(struct anv_cmd_buffer
*cmd_buffer
,
737 const struct anv_image
*image
,
738 enum isl_format format
,
739 VkImageAspectFlagBits aspect
,
740 uint32_t level
, uint32_t array_layer
,
741 enum isl_aux_op resolve_op
,
742 enum anv_fast_clear_type fast_clear_supported
)
744 const uint32_t plane
= anv_image_aspect_to_plane(image
->aspects
, aspect
);
747 anv_cmd_compute_resolve_predicate(cmd_buffer
, image
,
748 aspect
, level
, array_layer
,
749 resolve_op
, fast_clear_supported
);
750 #else /* GEN_GEN <= 8 */
751 anv_cmd_simple_resolve_predicate(cmd_buffer
, image
,
752 aspect
, level
, array_layer
,
753 resolve_op
, fast_clear_supported
);
756 /* CCS_D only supports full resolves and BLORP will assert on us if we try
757 * to do a partial resolve on a CCS_D surface.
759 if (resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
&&
760 image
->planes
[plane
].aux_usage
== ISL_AUX_USAGE_NONE
)
761 resolve_op
= ISL_AUX_OP_FULL_RESOLVE
;
763 anv_image_ccs_op(cmd_buffer
, image
, format
, aspect
, level
,
764 array_layer
, 1, resolve_op
, NULL
, true);
768 anv_cmd_predicated_mcs_resolve(struct anv_cmd_buffer
*cmd_buffer
,
769 const struct anv_image
*image
,
770 enum isl_format format
,
771 VkImageAspectFlagBits aspect
,
772 uint32_t array_layer
,
773 enum isl_aux_op resolve_op
,
774 enum anv_fast_clear_type fast_clear_supported
)
776 assert(aspect
== VK_IMAGE_ASPECT_COLOR_BIT
);
777 assert(resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
);
779 #if GEN_GEN >= 8 || GEN_IS_HASWELL
780 anv_cmd_compute_resolve_predicate(cmd_buffer
, image
,
781 aspect
, 0, array_layer
,
782 resolve_op
, fast_clear_supported
);
784 anv_image_mcs_op(cmd_buffer
, image
, format
, aspect
,
785 array_layer
, 1, resolve_op
, NULL
, true);
787 unreachable("MCS resolves are unsupported on Ivybridge and Bay Trail");
792 genX(cmd_buffer_mark_image_written
)(struct anv_cmd_buffer
*cmd_buffer
,
793 const struct anv_image
*image
,
794 VkImageAspectFlagBits aspect
,
795 enum isl_aux_usage aux_usage
,
798 uint32_t layer_count
)
800 /* The aspect must be exactly one of the image aspects. */
801 assert(util_bitcount(aspect
) == 1 && (aspect
& image
->aspects
));
803 /* The only compression types with more than just fast-clears are MCS,
804 * CCS_E, and HiZ. With HiZ we just trust the layout and don't actually
805 * track the current fast-clear and compression state. This leaves us
806 * with just MCS and CCS_E.
808 if (aux_usage
!= ISL_AUX_USAGE_CCS_E
&&
809 aux_usage
!= ISL_AUX_USAGE_MCS
)
812 set_image_compressed_bit(cmd_buffer
, image
, aspect
,
813 level
, base_layer
, layer_count
, true);
817 init_fast_clear_color(struct anv_cmd_buffer
*cmd_buffer
,
818 const struct anv_image
*image
,
819 VkImageAspectFlagBits aspect
)
821 assert(cmd_buffer
&& image
);
822 assert(image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
);
824 set_image_fast_clear_state(cmd_buffer
, image
, aspect
,
825 ANV_FAST_CLEAR_NONE
);
827 /* Initialize the struct fields that are accessed for fast-clears so that
828 * the HW restrictions on the field values are satisfied.
830 struct anv_address addr
=
831 anv_image_get_clear_color_addr(cmd_buffer
->device
, image
, aspect
);
834 const struct isl_device
*isl_dev
= &cmd_buffer
->device
->isl_dev
;
835 const unsigned num_dwords
= GEN_GEN
>= 10 ?
836 isl_dev
->ss
.clear_color_state_size
/ 4 :
837 isl_dev
->ss
.clear_value_size
/ 4;
838 for (unsigned i
= 0; i
< num_dwords
; i
++) {
839 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_STORE_DATA_IMM
), sdi
) {
841 sdi
.Address
.offset
+= i
* 4;
842 sdi
.ImmediateData
= 0;
846 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_STORE_DATA_IMM
), sdi
) {
848 if (GEN_GEN
>= 8 || GEN_IS_HASWELL
) {
849 /* Pre-SKL, the dword containing the clear values also contains
850 * other fields, so we need to initialize those fields to match the
851 * values that would be in a color attachment.
853 sdi
.ImmediateData
= ISL_CHANNEL_SELECT_RED
<< 25 |
854 ISL_CHANNEL_SELECT_GREEN
<< 22 |
855 ISL_CHANNEL_SELECT_BLUE
<< 19 |
856 ISL_CHANNEL_SELECT_ALPHA
<< 16;
857 } else if (GEN_GEN
== 7) {
858 /* On IVB, the dword containing the clear values also contains
859 * other fields that must be zero or can be zero.
861 sdi
.ImmediateData
= 0;
867 /* Copy the fast-clear value dword(s) between a surface state object and an
868 * image's fast clear state buffer.
871 genX(copy_fast_clear_dwords
)(struct anv_cmd_buffer
*cmd_buffer
,
872 struct anv_state surface_state
,
873 const struct anv_image
*image
,
874 VkImageAspectFlagBits aspect
,
875 bool copy_from_surface_state
)
877 assert(cmd_buffer
&& image
);
878 assert(image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
);
880 struct anv_address ss_clear_addr
= {
881 .bo
= cmd_buffer
->device
->surface_state_pool
.block_pool
.bo
,
882 .offset
= surface_state
.offset
+
883 cmd_buffer
->device
->isl_dev
.ss
.clear_value_offset
,
885 const struct anv_address entry_addr
=
886 anv_image_get_clear_color_addr(cmd_buffer
->device
, image
, aspect
);
887 unsigned copy_size
= cmd_buffer
->device
->isl_dev
.ss
.clear_value_size
;
890 /* On gen7, the combination of commands used here(MI_LOAD_REGISTER_MEM
891 * and MI_STORE_REGISTER_MEM) can cause GPU hangs if any rendering is
892 * in-flight when they are issued even if the memory touched is not
893 * currently active for rendering. The weird bit is that it is not the
894 * MI_LOAD/STORE_REGISTER_MEM commands which hang but rather the in-flight
895 * rendering hangs such that the next stalling command after the
896 * MI_LOAD/STORE_REGISTER_MEM commands will catch the hang.
898 * It is unclear exactly why this hang occurs. Both MI commands come with
899 * warnings about the 3D pipeline but that doesn't seem to fully explain
900 * it. My (Jason's) best theory is that it has something to do with the
901 * fact that we're using a GPU state register as our temporary and that
902 * something with reading/writing it is causing problems.
904 * In order to work around this issue, we emit a PIPE_CONTROL with the
905 * command streamer stall bit set.
907 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_CS_STALL_BIT
;
908 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
911 struct gen_mi_builder b
;
912 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
914 if (copy_from_surface_state
) {
915 gen_mi_memcpy(&b
, entry_addr
, ss_clear_addr
, copy_size
);
917 gen_mi_memcpy(&b
, ss_clear_addr
, entry_addr
, copy_size
);
919 /* Updating a surface state object may require that the state cache be
920 * invalidated. From the SKL PRM, Shared Functions -> State -> State
923 * Whenever the RENDER_SURFACE_STATE object in memory pointed to by
924 * the Binding Table Pointer (BTP) and Binding Table Index (BTI) is
925 * modified [...], the L1 state cache must be invalidated to ensure
926 * the new surface or sampler state is fetched from system memory.
928 * In testing, SKL doesn't actually seem to need this, but HSW does.
930 cmd_buffer
->state
.pending_pipe_bits
|=
931 ANV_PIPE_STATE_CACHE_INVALIDATE_BIT
;
936 * @brief Transitions a color buffer from one layout to another.
938 * See section 6.1.1. Image Layout Transitions of the Vulkan 1.0.50 spec for
941 * @param level_count VK_REMAINING_MIP_LEVELS isn't supported.
942 * @param layer_count VK_REMAINING_ARRAY_LAYERS isn't supported. For 3D images,
943 * this represents the maximum layers to transition at each
944 * specified miplevel.
947 transition_color_buffer(struct anv_cmd_buffer
*cmd_buffer
,
948 const struct anv_image
*image
,
949 VkImageAspectFlagBits aspect
,
950 const uint32_t base_level
, uint32_t level_count
,
951 uint32_t base_layer
, uint32_t layer_count
,
952 VkImageLayout initial_layout
,
953 VkImageLayout final_layout
)
955 const struct gen_device_info
*devinfo
= &cmd_buffer
->device
->info
;
956 /* Validate the inputs. */
958 assert(image
&& image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
);
959 /* These values aren't supported for simplicity's sake. */
960 assert(level_count
!= VK_REMAINING_MIP_LEVELS
&&
961 layer_count
!= VK_REMAINING_ARRAY_LAYERS
);
962 /* Ensure the subresource range is valid. */
963 UNUSED
uint64_t last_level_num
= base_level
+ level_count
;
964 const uint32_t max_depth
= anv_minify(image
->extent
.depth
, base_level
);
965 UNUSED
const uint32_t image_layers
= MAX2(image
->array_size
, max_depth
);
966 assert((uint64_t)base_layer
+ layer_count
<= image_layers
);
967 assert(last_level_num
<= image
->levels
);
968 /* The spec disallows these final layouts. */
969 assert(final_layout
!= VK_IMAGE_LAYOUT_UNDEFINED
&&
970 final_layout
!= VK_IMAGE_LAYOUT_PREINITIALIZED
);
972 /* No work is necessary if the layout stays the same or if this subresource
973 * range lacks auxiliary data.
975 if (initial_layout
== final_layout
)
978 uint32_t plane
= anv_image_aspect_to_plane(image
->aspects
, aspect
);
980 if (image
->planes
[plane
].shadow_surface
.isl
.size_B
> 0 &&
981 final_layout
== VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
) {
982 /* This surface is a linear compressed image with a tiled shadow surface
983 * for texturing. The client is about to use it in READ_ONLY_OPTIMAL so
984 * we need to ensure the shadow copy is up-to-date.
986 assert(image
->aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
987 assert(image
->planes
[plane
].surface
.isl
.tiling
== ISL_TILING_LINEAR
);
988 assert(image
->planes
[plane
].shadow_surface
.isl
.tiling
!= ISL_TILING_LINEAR
);
989 assert(isl_format_is_compressed(image
->planes
[plane
].surface
.isl
.format
));
991 anv_image_copy_to_shadow(cmd_buffer
, image
,
992 VK_IMAGE_ASPECT_COLOR_BIT
,
993 base_level
, level_count
,
994 base_layer
, layer_count
);
997 if (base_layer
>= anv_image_aux_layers(image
, aspect
, base_level
))
1000 assert(image
->tiling
== VK_IMAGE_TILING_OPTIMAL
);
1002 if (initial_layout
== VK_IMAGE_LAYOUT_UNDEFINED
||
1003 initial_layout
== VK_IMAGE_LAYOUT_PREINITIALIZED
) {
1004 /* A subresource in the undefined layout may have been aliased and
1005 * populated with any arrangement of bits. Therefore, we must initialize
1006 * the related aux buffer and clear buffer entry with desirable values.
1007 * An initial layout of PREINITIALIZED is the same as UNDEFINED for
1008 * images with VK_IMAGE_TILING_OPTIMAL.
1010 * Initialize the relevant clear buffer entries.
1012 if (base_level
== 0 && base_layer
== 0)
1013 init_fast_clear_color(cmd_buffer
, image
, aspect
);
1015 /* Initialize the aux buffers to enable correct rendering. In order to
1016 * ensure that things such as storage images work correctly, aux buffers
1017 * need to be initialized to valid data.
1019 * Having an aux buffer with invalid data is a problem for two reasons:
1021 * 1) Having an invalid value in the buffer can confuse the hardware.
1022 * For instance, with CCS_E on SKL, a two-bit CCS value of 2 is
1023 * invalid and leads to the hardware doing strange things. It
1024 * doesn't hang as far as we can tell but rendering corruption can
1027 * 2) If this transition is into the GENERAL layout and we then use the
1028 * image as a storage image, then we must have the aux buffer in the
1029 * pass-through state so that, if we then go to texture from the
1030 * image, we get the results of our storage image writes and not the
1031 * fast clear color or other random data.
1033 * For CCS both of the problems above are real demonstrable issues. In
1034 * that case, the only thing we can do is to perform an ambiguate to
1035 * transition the aux surface into the pass-through state.
1037 * For MCS, (2) is never an issue because we don't support multisampled
1038 * storage images. In theory, issue (1) is a problem with MCS but we've
1039 * never seen it in the wild. For 4x and 16x, all bit patters could, in
1040 * theory, be interpreted as something but we don't know that all bit
1041 * patterns are actually valid. For 2x and 8x, you could easily end up
1042 * with the MCS referring to an invalid plane because not all bits of
1043 * the MCS value are actually used. Even though we've never seen issues
1044 * in the wild, it's best to play it safe and initialize the MCS. We
1045 * can use a fast-clear for MCS because we only ever touch from render
1046 * and texture (no image load store).
1048 if (image
->samples
== 1) {
1049 for (uint32_t l
= 0; l
< level_count
; l
++) {
1050 const uint32_t level
= base_level
+ l
;
1052 uint32_t aux_layers
= anv_image_aux_layers(image
, aspect
, level
);
1053 if (base_layer
>= aux_layers
)
1054 break; /* We will only get fewer layers as level increases */
1055 uint32_t level_layer_count
=
1056 MIN2(layer_count
, aux_layers
- base_layer
);
1058 anv_image_ccs_op(cmd_buffer
, image
,
1059 image
->planes
[plane
].surface
.isl
.format
,
1060 aspect
, level
, base_layer
, level_layer_count
,
1061 ISL_AUX_OP_AMBIGUATE
, NULL
, false);
1063 if (image
->planes
[plane
].aux_usage
== ISL_AUX_USAGE_CCS_E
) {
1064 set_image_compressed_bit(cmd_buffer
, image
, aspect
,
1065 level
, base_layer
, level_layer_count
,
1070 if (image
->samples
== 4 || image
->samples
== 16) {
1071 anv_perf_warn(cmd_buffer
->device
->instance
, image
,
1072 "Doing a potentially unnecessary fast-clear to "
1073 "define an MCS buffer.");
1076 assert(base_level
== 0 && level_count
== 1);
1077 anv_image_mcs_op(cmd_buffer
, image
,
1078 image
->planes
[plane
].surface
.isl
.format
,
1079 aspect
, base_layer
, layer_count
,
1080 ISL_AUX_OP_FAST_CLEAR
, NULL
, false);
1085 const enum isl_aux_usage initial_aux_usage
=
1086 anv_layout_to_aux_usage(devinfo
, image
, aspect
, initial_layout
);
1087 const enum isl_aux_usage final_aux_usage
=
1088 anv_layout_to_aux_usage(devinfo
, image
, aspect
, final_layout
);
1090 /* The current code assumes that there is no mixing of CCS_E and CCS_D.
1091 * We can handle transitions between CCS_D/E to and from NONE. What we
1092 * don't yet handle is switching between CCS_E and CCS_D within a given
1093 * image. Doing so in a performant way requires more detailed aux state
1094 * tracking such as what is done in i965. For now, just assume that we
1095 * only have one type of compression.
1097 assert(initial_aux_usage
== ISL_AUX_USAGE_NONE
||
1098 final_aux_usage
== ISL_AUX_USAGE_NONE
||
1099 initial_aux_usage
== final_aux_usage
);
1101 /* If initial aux usage is NONE, there is nothing to resolve */
1102 if (initial_aux_usage
== ISL_AUX_USAGE_NONE
)
1105 enum isl_aux_op resolve_op
= ISL_AUX_OP_NONE
;
1107 /* If the initial layout supports more fast clear than the final layout
1108 * then we need at least a partial resolve.
1110 const enum anv_fast_clear_type initial_fast_clear
=
1111 anv_layout_to_fast_clear_type(devinfo
, image
, aspect
, initial_layout
);
1112 const enum anv_fast_clear_type final_fast_clear
=
1113 anv_layout_to_fast_clear_type(devinfo
, image
, aspect
, final_layout
);
1114 if (final_fast_clear
< initial_fast_clear
)
1115 resolve_op
= ISL_AUX_OP_PARTIAL_RESOLVE
;
1117 if (initial_aux_usage
== ISL_AUX_USAGE_CCS_E
&&
1118 final_aux_usage
!= ISL_AUX_USAGE_CCS_E
)
1119 resolve_op
= ISL_AUX_OP_FULL_RESOLVE
;
1121 if (resolve_op
== ISL_AUX_OP_NONE
)
1124 /* Perform a resolve to synchronize data between the main and aux buffer.
1125 * Before we begin, we must satisfy the cache flushing requirement specified
1126 * in the Sky Lake PRM Vol. 7, "MCS Buffer for Render Target(s)":
1128 * Any transition from any value in {Clear, Render, Resolve} to a
1129 * different value in {Clear, Render, Resolve} requires end of pipe
1132 * We perform a flush of the write cache before and after the clear and
1133 * resolve operations to meet this requirement.
1135 * Unlike other drawing, fast clear operations are not properly
1136 * synchronized. The first PIPE_CONTROL here likely ensures that the
1137 * contents of the previous render or clear hit the render target before we
1138 * resolve and the second likely ensures that the resolve is complete before
1139 * we do any more rendering or clearing.
1141 cmd_buffer
->state
.pending_pipe_bits
|=
1142 ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
| ANV_PIPE_CS_STALL_BIT
;
1144 for (uint32_t l
= 0; l
< level_count
; l
++) {
1145 uint32_t level
= base_level
+ l
;
1147 uint32_t aux_layers
= anv_image_aux_layers(image
, aspect
, level
);
1148 if (base_layer
>= aux_layers
)
1149 break; /* We will only get fewer layers as level increases */
1150 uint32_t level_layer_count
=
1151 MIN2(layer_count
, aux_layers
- base_layer
);
1153 for (uint32_t a
= 0; a
< level_layer_count
; a
++) {
1154 uint32_t array_layer
= base_layer
+ a
;
1155 if (image
->samples
== 1) {
1156 anv_cmd_predicated_ccs_resolve(cmd_buffer
, image
,
1157 image
->planes
[plane
].surface
.isl
.format
,
1158 aspect
, level
, array_layer
, resolve_op
,
1161 /* We only support fast-clear on the first layer so partial
1162 * resolves should not be used on other layers as they will use
1163 * the clear color stored in memory that is only valid for layer0.
1165 if (resolve_op
== ISL_AUX_OP_PARTIAL_RESOLVE
&&
1169 anv_cmd_predicated_mcs_resolve(cmd_buffer
, image
,
1170 image
->planes
[plane
].surface
.isl
.format
,
1171 aspect
, array_layer
, resolve_op
,
1177 cmd_buffer
->state
.pending_pipe_bits
|=
1178 ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
| ANV_PIPE_CS_STALL_BIT
;
1182 * Setup anv_cmd_state::attachments for vkCmdBeginRenderPass.
1185 genX(cmd_buffer_setup_attachments
)(struct anv_cmd_buffer
*cmd_buffer
,
1186 struct anv_render_pass
*pass
,
1187 const VkRenderPassBeginInfo
*begin
)
1189 const struct isl_device
*isl_dev
= &cmd_buffer
->device
->isl_dev
;
1190 struct anv_cmd_state
*state
= &cmd_buffer
->state
;
1191 struct anv_framebuffer
*framebuffer
= cmd_buffer
->state
.framebuffer
;
1193 vk_free(&cmd_buffer
->pool
->alloc
, state
->attachments
);
1195 if (pass
->attachment_count
> 0) {
1196 state
->attachments
= vk_alloc(&cmd_buffer
->pool
->alloc
,
1197 pass
->attachment_count
*
1198 sizeof(state
->attachments
[0]),
1199 8, VK_SYSTEM_ALLOCATION_SCOPE_OBJECT
);
1200 if (state
->attachments
== NULL
) {
1201 /* Propagate VK_ERROR_OUT_OF_HOST_MEMORY to vkEndCommandBuffer */
1202 return anv_batch_set_error(&cmd_buffer
->batch
,
1203 VK_ERROR_OUT_OF_HOST_MEMORY
);
1206 state
->attachments
= NULL
;
1209 /* Reserve one for the NULL state. */
1210 unsigned num_states
= 1;
1211 for (uint32_t i
= 0; i
< pass
->attachment_count
; ++i
) {
1212 if (vk_format_is_color(pass
->attachments
[i
].format
))
1215 if (need_input_attachment_state(&pass
->attachments
[i
]))
1219 const uint32_t ss_stride
= align_u32(isl_dev
->ss
.size
, isl_dev
->ss
.align
);
1220 state
->render_pass_states
=
1221 anv_state_stream_alloc(&cmd_buffer
->surface_state_stream
,
1222 num_states
* ss_stride
, isl_dev
->ss
.align
);
1224 struct anv_state next_state
= state
->render_pass_states
;
1225 next_state
.alloc_size
= isl_dev
->ss
.size
;
1227 state
->null_surface_state
= next_state
;
1228 next_state
.offset
+= ss_stride
;
1229 next_state
.map
+= ss_stride
;
1231 const VkRenderPassAttachmentBeginInfoKHR
*begin_attachment
=
1232 vk_find_struct_const(begin
, RENDER_PASS_ATTACHMENT_BEGIN_INFO_KHR
);
1234 if (begin
&& !begin_attachment
)
1235 assert(pass
->attachment_count
== framebuffer
->attachment_count
);
1237 for (uint32_t i
= 0; i
< pass
->attachment_count
; ++i
) {
1238 if (vk_format_is_color(pass
->attachments
[i
].format
)) {
1239 state
->attachments
[i
].color
.state
= next_state
;
1240 next_state
.offset
+= ss_stride
;
1241 next_state
.map
+= ss_stride
;
1244 if (need_input_attachment_state(&pass
->attachments
[i
])) {
1245 state
->attachments
[i
].input
.state
= next_state
;
1246 next_state
.offset
+= ss_stride
;
1247 next_state
.map
+= ss_stride
;
1250 if (begin_attachment
&& begin_attachment
->attachmentCount
!= 0) {
1251 assert(begin_attachment
->attachmentCount
== pass
->attachment_count
);
1252 ANV_FROM_HANDLE(anv_image_view
, iview
, begin_attachment
->pAttachments
[i
]);
1253 cmd_buffer
->state
.attachments
[i
].image_view
= iview
;
1254 } else if (framebuffer
&& i
< framebuffer
->attachment_count
) {
1255 cmd_buffer
->state
.attachments
[i
].image_view
= framebuffer
->attachments
[i
];
1258 assert(next_state
.offset
== state
->render_pass_states
.offset
+
1259 state
->render_pass_states
.alloc_size
);
1262 isl_null_fill_state(isl_dev
, state
->null_surface_state
.map
,
1263 isl_extent3d(framebuffer
->width
,
1264 framebuffer
->height
,
1265 framebuffer
->layers
));
1267 for (uint32_t i
= 0; i
< pass
->attachment_count
; ++i
) {
1268 struct anv_render_pass_attachment
*att
= &pass
->attachments
[i
];
1269 VkImageAspectFlags att_aspects
= vk_format_aspects(att
->format
);
1270 VkImageAspectFlags clear_aspects
= 0;
1271 VkImageAspectFlags load_aspects
= 0;
1273 if (att_aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) {
1274 /* color attachment */
1275 if (att
->load_op
== VK_ATTACHMENT_LOAD_OP_CLEAR
) {
1276 clear_aspects
|= VK_IMAGE_ASPECT_COLOR_BIT
;
1277 } else if (att
->load_op
== VK_ATTACHMENT_LOAD_OP_LOAD
) {
1278 load_aspects
|= VK_IMAGE_ASPECT_COLOR_BIT
;
1281 /* depthstencil attachment */
1282 if (att_aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
1283 if (att
->load_op
== VK_ATTACHMENT_LOAD_OP_CLEAR
) {
1284 clear_aspects
|= VK_IMAGE_ASPECT_DEPTH_BIT
;
1285 } else if (att
->load_op
== VK_ATTACHMENT_LOAD_OP_LOAD
) {
1286 load_aspects
|= VK_IMAGE_ASPECT_DEPTH_BIT
;
1289 if (att_aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
1290 if (att
->stencil_load_op
== VK_ATTACHMENT_LOAD_OP_CLEAR
) {
1291 clear_aspects
|= VK_IMAGE_ASPECT_STENCIL_BIT
;
1292 } else if (att
->stencil_load_op
== VK_ATTACHMENT_LOAD_OP_LOAD
) {
1293 load_aspects
|= VK_IMAGE_ASPECT_STENCIL_BIT
;
1298 state
->attachments
[i
].current_layout
= att
->initial_layout
;
1299 state
->attachments
[i
].current_stencil_layout
= att
->stencil_initial_layout
;
1300 state
->attachments
[i
].pending_clear_aspects
= clear_aspects
;
1301 state
->attachments
[i
].pending_load_aspects
= load_aspects
;
1303 state
->attachments
[i
].clear_value
= begin
->pClearValues
[i
];
1305 struct anv_image_view
*iview
= cmd_buffer
->state
.attachments
[i
].image_view
;
1306 anv_assert(iview
->vk_format
== att
->format
);
1308 const uint32_t num_layers
= iview
->planes
[0].isl
.array_len
;
1309 state
->attachments
[i
].pending_clear_views
= (1 << num_layers
) - 1;
1311 union isl_color_value clear_color
= { .u32
= { 0, } };
1312 if (att_aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) {
1313 anv_assert(iview
->n_planes
== 1);
1314 assert(att_aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
1315 color_attachment_compute_aux_usage(cmd_buffer
->device
,
1316 state
, i
, begin
->renderArea
,
1319 anv_image_fill_surface_state(cmd_buffer
->device
,
1321 VK_IMAGE_ASPECT_COLOR_BIT
,
1322 &iview
->planes
[0].isl
,
1323 ISL_SURF_USAGE_RENDER_TARGET_BIT
,
1324 state
->attachments
[i
].aux_usage
,
1327 &state
->attachments
[i
].color
,
1330 add_surface_state_relocs(cmd_buffer
, state
->attachments
[i
].color
);
1332 depth_stencil_attachment_compute_aux_usage(cmd_buffer
->device
,
1337 if (need_input_attachment_state(&pass
->attachments
[i
])) {
1338 anv_image_fill_surface_state(cmd_buffer
->device
,
1340 VK_IMAGE_ASPECT_COLOR_BIT
,
1341 &iview
->planes
[0].isl
,
1342 ISL_SURF_USAGE_TEXTURE_BIT
,
1343 state
->attachments
[i
].input_aux_usage
,
1346 &state
->attachments
[i
].input
,
1349 add_surface_state_relocs(cmd_buffer
, state
->attachments
[i
].input
);
1358 genX(BeginCommandBuffer
)(
1359 VkCommandBuffer commandBuffer
,
1360 const VkCommandBufferBeginInfo
* pBeginInfo
)
1362 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
1364 /* If this is the first vkBeginCommandBuffer, we must *initialize* the
1365 * command buffer's state. Otherwise, we must *reset* its state. In both
1366 * cases we reset it.
1368 * From the Vulkan 1.0 spec:
1370 * If a command buffer is in the executable state and the command buffer
1371 * was allocated from a command pool with the
1372 * VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then
1373 * vkBeginCommandBuffer implicitly resets the command buffer, behaving
1374 * as if vkResetCommandBuffer had been called with
1375 * VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set. It then puts
1376 * the command buffer in the recording state.
1378 anv_cmd_buffer_reset(cmd_buffer
);
1380 cmd_buffer
->usage_flags
= pBeginInfo
->flags
;
1382 assert(cmd_buffer
->level
== VK_COMMAND_BUFFER_LEVEL_SECONDARY
||
1383 !(cmd_buffer
->usage_flags
& VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
));
1385 genX(cmd_buffer_emit_state_base_address
)(cmd_buffer
);
1387 /* We sometimes store vertex data in the dynamic state buffer for blorp
1388 * operations and our dynamic state stream may re-use data from previous
1389 * command buffers. In order to prevent stale cache data, we flush the VF
1390 * cache. We could do this on every blorp call but that's not really
1391 * needed as all of the data will get written by the CPU prior to the GPU
1392 * executing anything. The chances are fairly high that they will use
1393 * blorp at least once per primary command buffer so it shouldn't be
1396 if (cmd_buffer
->level
== VK_COMMAND_BUFFER_LEVEL_PRIMARY
)
1397 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_VF_CACHE_INVALIDATE_BIT
;
1399 /* We send an "Indirect State Pointers Disable" packet at
1400 * EndCommandBuffer, so all push contant packets are ignored during a
1401 * context restore. Documentation says after that command, we need to
1402 * emit push constants again before any rendering operation. So we
1403 * flag them dirty here to make sure they get emitted.
1405 cmd_buffer
->state
.push_constants_dirty
|= VK_SHADER_STAGE_ALL_GRAPHICS
;
1407 VkResult result
= VK_SUCCESS
;
1408 if (cmd_buffer
->usage_flags
&
1409 VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
) {
1410 assert(pBeginInfo
->pInheritanceInfo
);
1411 cmd_buffer
->state
.pass
=
1412 anv_render_pass_from_handle(pBeginInfo
->pInheritanceInfo
->renderPass
);
1413 cmd_buffer
->state
.subpass
=
1414 &cmd_buffer
->state
.pass
->subpasses
[pBeginInfo
->pInheritanceInfo
->subpass
];
1416 /* This is optional in the inheritance info. */
1417 cmd_buffer
->state
.framebuffer
=
1418 anv_framebuffer_from_handle(pBeginInfo
->pInheritanceInfo
->framebuffer
);
1420 result
= genX(cmd_buffer_setup_attachments
)(cmd_buffer
,
1421 cmd_buffer
->state
.pass
, NULL
);
1423 /* Record that HiZ is enabled if we can. */
1424 if (cmd_buffer
->state
.framebuffer
) {
1425 const struct anv_image_view
* const iview
=
1426 anv_cmd_buffer_get_depth_stencil_view(cmd_buffer
);
1429 VkImageLayout layout
=
1430 cmd_buffer
->state
.subpass
->depth_stencil_attachment
->layout
;
1432 enum isl_aux_usage aux_usage
=
1433 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, iview
->image
,
1434 VK_IMAGE_ASPECT_DEPTH_BIT
, layout
);
1436 cmd_buffer
->state
.hiz_enabled
= aux_usage
== ISL_AUX_USAGE_HIZ
;
1440 cmd_buffer
->state
.gfx
.dirty
|= ANV_CMD_DIRTY_RENDER_TARGETS
;
1443 #if GEN_GEN >= 8 || GEN_IS_HASWELL
1444 if (cmd_buffer
->level
== VK_COMMAND_BUFFER_LEVEL_SECONDARY
) {
1445 const VkCommandBufferInheritanceConditionalRenderingInfoEXT
*conditional_rendering_info
=
1446 vk_find_struct_const(pBeginInfo
->pInheritanceInfo
->pNext
, COMMAND_BUFFER_INHERITANCE_CONDITIONAL_RENDERING_INFO_EXT
);
1448 /* If secondary buffer supports conditional rendering
1449 * we should emit commands as if conditional rendering is enabled.
1451 cmd_buffer
->state
.conditional_render_enabled
=
1452 conditional_rendering_info
&& conditional_rendering_info
->conditionalRenderingEnable
;
1459 /* From the PRM, Volume 2a:
1461 * "Indirect State Pointers Disable
1463 * At the completion of the post-sync operation associated with this pipe
1464 * control packet, the indirect state pointers in the hardware are
1465 * considered invalid; the indirect pointers are not saved in the context.
1466 * If any new indirect state commands are executed in the command stream
1467 * while the pipe control is pending, the new indirect state commands are
1470 * [DevIVB+]: Using Invalidate State Pointer (ISP) only inhibits context
1471 * restoring of Push Constant (3DSTATE_CONSTANT_*) commands. Push Constant
1472 * commands are only considered as Indirect State Pointers. Once ISP is
1473 * issued in a context, SW must initialize by programming push constant
1474 * commands for all the shaders (at least to zero length) before attempting
1475 * any rendering operation for the same context."
1477 * 3DSTATE_CONSTANT_* packets are restored during a context restore,
1478 * even though they point to a BO that has been already unreferenced at
1479 * the end of the previous batch buffer. This has been fine so far since
1480 * we are protected by these scratch page (every address not covered by
1481 * a BO should be pointing to the scratch page). But on CNL, it is
1482 * causing a GPU hang during context restore at the 3DSTATE_CONSTANT_*
1485 * The flag "Indirect State Pointers Disable" in PIPE_CONTROL tells the
1486 * hardware to ignore previous 3DSTATE_CONSTANT_* packets during a
1487 * context restore, so the mentioned hang doesn't happen. However,
1488 * software must program push constant commands for all stages prior to
1489 * rendering anything. So we flag them dirty in BeginCommandBuffer.
1491 * Finally, we also make sure to stall at pixel scoreboard to make sure the
1492 * constants have been loaded into the EUs prior to disable the push constants
1493 * so that it doesn't hang a previous 3DPRIMITIVE.
1496 emit_isp_disable(struct anv_cmd_buffer
*cmd_buffer
)
1498 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
1499 pc
.StallAtPixelScoreboard
= true;
1500 pc
.CommandStreamerStallEnable
= true;
1502 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
1503 pc
.IndirectStatePointersDisable
= true;
1504 pc
.CommandStreamerStallEnable
= true;
1509 genX(EndCommandBuffer
)(
1510 VkCommandBuffer commandBuffer
)
1512 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
1514 if (anv_batch_has_error(&cmd_buffer
->batch
))
1515 return cmd_buffer
->batch
.status
;
1517 /* We want every command buffer to start with the PMA fix in a known state,
1518 * so we disable it at the end of the command buffer.
1520 genX(cmd_buffer_enable_pma_fix
)(cmd_buffer
, false);
1522 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
1524 emit_isp_disable(cmd_buffer
);
1526 anv_cmd_buffer_end_batch_buffer(cmd_buffer
);
1532 genX(CmdExecuteCommands
)(
1533 VkCommandBuffer commandBuffer
,
1534 uint32_t commandBufferCount
,
1535 const VkCommandBuffer
* pCmdBuffers
)
1537 ANV_FROM_HANDLE(anv_cmd_buffer
, primary
, commandBuffer
);
1539 assert(primary
->level
== VK_COMMAND_BUFFER_LEVEL_PRIMARY
);
1541 if (anv_batch_has_error(&primary
->batch
))
1544 /* The secondary command buffers will assume that the PMA fix is disabled
1545 * when they begin executing. Make sure this is true.
1547 genX(cmd_buffer_enable_pma_fix
)(primary
, false);
1549 /* The secondary command buffer doesn't know which textures etc. have been
1550 * flushed prior to their execution. Apply those flushes now.
1552 genX(cmd_buffer_apply_pipe_flushes
)(primary
);
1554 for (uint32_t i
= 0; i
< commandBufferCount
; i
++) {
1555 ANV_FROM_HANDLE(anv_cmd_buffer
, secondary
, pCmdBuffers
[i
]);
1557 assert(secondary
->level
== VK_COMMAND_BUFFER_LEVEL_SECONDARY
);
1558 assert(!anv_batch_has_error(&secondary
->batch
));
1560 #if GEN_GEN >= 8 || GEN_IS_HASWELL
1561 if (secondary
->state
.conditional_render_enabled
) {
1562 if (!primary
->state
.conditional_render_enabled
) {
1563 /* Secondary buffer is constructed as if it will be executed
1564 * with conditional rendering, we should satisfy this dependency
1565 * regardless of conditional rendering being enabled in primary.
1567 struct gen_mi_builder b
;
1568 gen_mi_builder_init(&b
, &primary
->batch
);
1569 gen_mi_store(&b
, gen_mi_reg64(ANV_PREDICATE_RESULT_REG
),
1570 gen_mi_imm(UINT64_MAX
));
1575 if (secondary
->usage_flags
&
1576 VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT
) {
1577 /* If we're continuing a render pass from the primary, we need to
1578 * copy the surface states for the current subpass into the storage
1579 * we allocated for them in BeginCommandBuffer.
1581 struct anv_bo
*ss_bo
=
1582 primary
->device
->surface_state_pool
.block_pool
.bo
;
1583 struct anv_state src_state
= primary
->state
.render_pass_states
;
1584 struct anv_state dst_state
= secondary
->state
.render_pass_states
;
1585 assert(src_state
.alloc_size
== dst_state
.alloc_size
);
1587 genX(cmd_buffer_so_memcpy
)(primary
,
1588 (struct anv_address
) {
1590 .offset
= dst_state
.offset
,
1592 (struct anv_address
) {
1594 .offset
= src_state
.offset
,
1596 src_state
.alloc_size
);
1599 anv_cmd_buffer_add_secondary(primary
, secondary
);
1602 /* The secondary may have selected a different pipeline (3D or compute) and
1603 * may have changed the current L3$ configuration. Reset our tracking
1604 * variables to invalid values to ensure that we re-emit these in the case
1605 * where we do any draws or compute dispatches from the primary after the
1606 * secondary has returned.
1608 primary
->state
.current_pipeline
= UINT32_MAX
;
1609 primary
->state
.current_l3_config
= NULL
;
1610 primary
->state
.current_hash_scale
= 0;
1612 /* Each of the secondary command buffers will use its own state base
1613 * address. We need to re-emit state base address for the primary after
1614 * all of the secondaries are done.
1616 * TODO: Maybe we want to make this a dirty bit to avoid extra state base
1619 genX(cmd_buffer_emit_state_base_address
)(primary
);
1622 #define IVB_L3SQCREG1_SQGHPCI_DEFAULT 0x00730000
1623 #define VLV_L3SQCREG1_SQGHPCI_DEFAULT 0x00d30000
1624 #define HSW_L3SQCREG1_SQGHPCI_DEFAULT 0x00610000
1627 * Program the hardware to use the specified L3 configuration.
1630 genX(cmd_buffer_config_l3
)(struct anv_cmd_buffer
*cmd_buffer
,
1631 const struct gen_l3_config
*cfg
)
1634 if (cfg
== cmd_buffer
->state
.current_l3_config
)
1637 if (unlikely(INTEL_DEBUG
& DEBUG_L3
)) {
1638 intel_logd("L3 config transition: ");
1639 gen_dump_l3_config(cfg
, stderr
);
1642 UNUSED
const bool has_slm
= cfg
->n
[GEN_L3P_SLM
];
1644 /* According to the hardware docs, the L3 partitioning can only be changed
1645 * while the pipeline is completely drained and the caches are flushed,
1646 * which involves a first PIPE_CONTROL flush which stalls the pipeline...
1648 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
1649 pc
.DCFlushEnable
= true;
1650 pc
.PostSyncOperation
= NoWrite
;
1651 pc
.CommandStreamerStallEnable
= true;
1654 /* ...followed by a second pipelined PIPE_CONTROL that initiates
1655 * invalidation of the relevant caches. Note that because RO invalidation
1656 * happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL
1657 * command is processed by the CS) we cannot combine it with the previous
1658 * stalling flush as the hardware documentation suggests, because that
1659 * would cause the CS to stall on previous rendering *after* RO
1660 * invalidation and wouldn't prevent the RO caches from being polluted by
1661 * concurrent rendering before the stall completes. This intentionally
1662 * doesn't implement the SKL+ hardware workaround suggesting to enable CS
1663 * stall on PIPE_CONTROLs with the texture cache invalidation bit set for
1664 * GPGPU workloads because the previous and subsequent PIPE_CONTROLs
1665 * already guarantee that there is no concurrent GPGPU kernel execution
1666 * (see SKL HSD 2132585).
1668 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
1669 pc
.TextureCacheInvalidationEnable
= true;
1670 pc
.ConstantCacheInvalidationEnable
= true;
1671 pc
.InstructionCacheInvalidateEnable
= true;
1672 pc
.StateCacheInvalidationEnable
= true;
1673 pc
.PostSyncOperation
= NoWrite
;
1676 /* Now send a third stalling flush to make sure that invalidation is
1677 * complete when the L3 configuration registers are modified.
1679 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
1680 pc
.DCFlushEnable
= true;
1681 pc
.PostSyncOperation
= NoWrite
;
1682 pc
.CommandStreamerStallEnable
= true;
1687 assert(!cfg
->n
[GEN_L3P_IS
] && !cfg
->n
[GEN_L3P_C
] && !cfg
->n
[GEN_L3P_T
]);
1690 #define L3_ALLOCATION_REG GENX(L3ALLOC)
1691 #define L3_ALLOCATION_REG_num GENX(L3ALLOC_num)
1693 #define L3_ALLOCATION_REG GENX(L3CNTLREG)
1694 #define L3_ALLOCATION_REG_num GENX(L3CNTLREG_num)
1698 anv_pack_struct(&l3cr
, L3_ALLOCATION_REG
,
1700 .SLMEnable
= has_slm
,
1703 /* WA_1406697149: Bit 9 "Error Detection Behavior Control" must be set
1704 * in L3CNTLREG register. The default setting of the bit is not the
1705 * desirable behavior.
1707 .ErrorDetectionBehaviorControl
= true,
1708 .UseFullWays
= true,
1710 .URBAllocation
= cfg
->n
[GEN_L3P_URB
],
1711 .ROAllocation
= cfg
->n
[GEN_L3P_RO
],
1712 .DCAllocation
= cfg
->n
[GEN_L3P_DC
],
1713 .AllAllocation
= cfg
->n
[GEN_L3P_ALL
]);
1715 /* Set up the L3 partitioning. */
1716 emit_lri(&cmd_buffer
->batch
, L3_ALLOCATION_REG_num
, l3cr
);
1720 const bool has_dc
= cfg
->n
[GEN_L3P_DC
] || cfg
->n
[GEN_L3P_ALL
];
1721 const bool has_is
= cfg
->n
[GEN_L3P_IS
] || cfg
->n
[GEN_L3P_RO
] ||
1722 cfg
->n
[GEN_L3P_ALL
];
1723 const bool has_c
= cfg
->n
[GEN_L3P_C
] || cfg
->n
[GEN_L3P_RO
] ||
1724 cfg
->n
[GEN_L3P_ALL
];
1725 const bool has_t
= cfg
->n
[GEN_L3P_T
] || cfg
->n
[GEN_L3P_RO
] ||
1726 cfg
->n
[GEN_L3P_ALL
];
1728 assert(!cfg
->n
[GEN_L3P_ALL
]);
1730 /* When enabled SLM only uses a portion of the L3 on half of the banks,
1731 * the matching space on the remaining banks has to be allocated to a
1732 * client (URB for all validated configurations) set to the
1733 * lower-bandwidth 2-bank address hashing mode.
1735 const struct gen_device_info
*devinfo
= &cmd_buffer
->device
->info
;
1736 const bool urb_low_bw
= has_slm
&& !devinfo
->is_baytrail
;
1737 assert(!urb_low_bw
|| cfg
->n
[GEN_L3P_URB
] == cfg
->n
[GEN_L3P_SLM
]);
1739 /* Minimum number of ways that can be allocated to the URB. */
1740 const unsigned n0_urb
= devinfo
->is_baytrail
? 32 : 0;
1741 assert(cfg
->n
[GEN_L3P_URB
] >= n0_urb
);
1743 uint32_t l3sqcr1
, l3cr2
, l3cr3
;
1744 anv_pack_struct(&l3sqcr1
, GENX(L3SQCREG1
),
1745 .ConvertDC_UC
= !has_dc
,
1746 .ConvertIS_UC
= !has_is
,
1747 .ConvertC_UC
= !has_c
,
1748 .ConvertT_UC
= !has_t
);
1750 GEN_IS_HASWELL
? HSW_L3SQCREG1_SQGHPCI_DEFAULT
:
1751 devinfo
->is_baytrail
? VLV_L3SQCREG1_SQGHPCI_DEFAULT
:
1752 IVB_L3SQCREG1_SQGHPCI_DEFAULT
;
1754 anv_pack_struct(&l3cr2
, GENX(L3CNTLREG2
),
1755 .SLMEnable
= has_slm
,
1756 .URBLowBandwidth
= urb_low_bw
,
1757 .URBAllocation
= cfg
->n
[GEN_L3P_URB
] - n0_urb
,
1759 .ALLAllocation
= cfg
->n
[GEN_L3P_ALL
],
1761 .ROAllocation
= cfg
->n
[GEN_L3P_RO
],
1762 .DCAllocation
= cfg
->n
[GEN_L3P_DC
]);
1764 anv_pack_struct(&l3cr3
, GENX(L3CNTLREG3
),
1765 .ISAllocation
= cfg
->n
[GEN_L3P_IS
],
1766 .ISLowBandwidth
= 0,
1767 .CAllocation
= cfg
->n
[GEN_L3P_C
],
1769 .TAllocation
= cfg
->n
[GEN_L3P_T
],
1770 .TLowBandwidth
= 0);
1772 /* Set up the L3 partitioning. */
1773 emit_lri(&cmd_buffer
->batch
, GENX(L3SQCREG1_num
), l3sqcr1
);
1774 emit_lri(&cmd_buffer
->batch
, GENX(L3CNTLREG2_num
), l3cr2
);
1775 emit_lri(&cmd_buffer
->batch
, GENX(L3CNTLREG3_num
), l3cr3
);
1778 if (cmd_buffer
->device
->instance
->physicalDevice
.cmd_parser_version
>= 4) {
1779 /* Enable L3 atomics on HSW if we have a DC partition, otherwise keep
1780 * them disabled to avoid crashing the system hard.
1782 uint32_t scratch1
, chicken3
;
1783 anv_pack_struct(&scratch1
, GENX(SCRATCH1
),
1784 .L3AtomicDisable
= !has_dc
);
1785 anv_pack_struct(&chicken3
, GENX(CHICKEN3
),
1786 .L3AtomicDisableMask
= true,
1787 .L3AtomicDisable
= !has_dc
);
1788 emit_lri(&cmd_buffer
->batch
, GENX(SCRATCH1_num
), scratch1
);
1789 emit_lri(&cmd_buffer
->batch
, GENX(CHICKEN3_num
), chicken3
);
1795 cmd_buffer
->state
.current_l3_config
= cfg
;
1799 genX(cmd_buffer_apply_pipe_flushes
)(struct anv_cmd_buffer
*cmd_buffer
)
1801 enum anv_pipe_bits bits
= cmd_buffer
->state
.pending_pipe_bits
;
1803 if (cmd_buffer
->device
->instance
->physicalDevice
.always_flush_cache
)
1804 bits
|= ANV_PIPE_FLUSH_BITS
| ANV_PIPE_INVALIDATE_BITS
;
1806 /* Flushes are pipelined while invalidations are handled immediately.
1807 * Therefore, if we're flushing anything then we need to schedule a stall
1808 * before any invalidations can happen.
1810 if (bits
& ANV_PIPE_FLUSH_BITS
)
1811 bits
|= ANV_PIPE_NEEDS_CS_STALL_BIT
;
1813 /* If we're going to do an invalidate and we have a pending CS stall that
1814 * has yet to be resolved, we do the CS stall now.
1816 if ((bits
& ANV_PIPE_INVALIDATE_BITS
) &&
1817 (bits
& ANV_PIPE_NEEDS_CS_STALL_BIT
)) {
1818 bits
|= ANV_PIPE_CS_STALL_BIT
;
1819 bits
&= ~ANV_PIPE_NEEDS_CS_STALL_BIT
;
1822 if (GEN_GEN
>= 12 &&
1823 ((bits
& ANV_PIPE_DEPTH_CACHE_FLUSH_BIT
) ||
1824 (bits
& ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
))) {
1825 /* From the PIPE_CONTROL instruction table, bit 28 (Tile Cache Flush
1828 * Unified Cache (Tile Cache Disabled):
1830 * When the Color and Depth (Z) streams are enabled to be cached in
1831 * the DC space of L2, Software must use "Render Target Cache Flush
1832 * Enable" and "Depth Cache Flush Enable" along with "Tile Cache
1833 * Flush" for getting the color and depth (Z) write data to be
1834 * globally observable. In this mode of operation it is not required
1835 * to set "CS Stall" upon setting "Tile Cache Flush" bit.
1837 bits
|= ANV_PIPE_TILE_CACHE_FLUSH_BIT
;
1840 if (bits
& (ANV_PIPE_FLUSH_BITS
| ANV_PIPE_CS_STALL_BIT
)) {
1841 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
) {
1843 pipe
.TileCacheFlushEnable
= bits
& ANV_PIPE_TILE_CACHE_FLUSH_BIT
;
1845 pipe
.DepthCacheFlushEnable
= bits
& ANV_PIPE_DEPTH_CACHE_FLUSH_BIT
;
1846 pipe
.DCFlushEnable
= bits
& ANV_PIPE_DATA_CACHE_FLUSH_BIT
;
1847 pipe
.RenderTargetCacheFlushEnable
=
1848 bits
& ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
;
1850 pipe
.DepthStallEnable
= bits
& ANV_PIPE_DEPTH_STALL_BIT
;
1851 pipe
.CommandStreamerStallEnable
= bits
& ANV_PIPE_CS_STALL_BIT
;
1852 pipe
.StallAtPixelScoreboard
= bits
& ANV_PIPE_STALL_AT_SCOREBOARD_BIT
;
1855 * According to the Broadwell documentation, any PIPE_CONTROL with the
1856 * "Command Streamer Stall" bit set must also have another bit set,
1857 * with five different options:
1859 * - Render Target Cache Flush
1860 * - Depth Cache Flush
1861 * - Stall at Pixel Scoreboard
1862 * - Post-Sync Operation
1866 * I chose "Stall at Pixel Scoreboard" since that's what we use in
1867 * mesa and it seems to work fine. The choice is fairly arbitrary.
1869 if ((bits
& ANV_PIPE_CS_STALL_BIT
) &&
1870 !(bits
& (ANV_PIPE_FLUSH_BITS
| ANV_PIPE_DEPTH_STALL_BIT
|
1871 ANV_PIPE_STALL_AT_SCOREBOARD_BIT
)))
1872 pipe
.StallAtPixelScoreboard
= true;
1875 /* If a render target flush was emitted, then we can toggle off the bit
1876 * saying that render target writes are ongoing.
1878 if (bits
& ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
)
1879 bits
&= ~(ANV_PIPE_RENDER_TARGET_BUFFER_WRITES
);
1881 bits
&= ~(ANV_PIPE_FLUSH_BITS
| ANV_PIPE_CS_STALL_BIT
);
1884 if (bits
& ANV_PIPE_INVALIDATE_BITS
) {
1885 /* From the SKL PRM, Vol. 2a, "PIPE_CONTROL",
1887 * "If the VF Cache Invalidation Enable is set to a 1 in a
1888 * PIPE_CONTROL, a separate Null PIPE_CONTROL, all bitfields sets to
1889 * 0, with the VF Cache Invalidation Enable set to 0 needs to be sent
1890 * prior to the PIPE_CONTROL with VF Cache Invalidation Enable set to
1893 * This appears to hang Broadwell, so we restrict it to just gen9.
1895 if (GEN_GEN
== 9 && (bits
& ANV_PIPE_VF_CACHE_INVALIDATE_BIT
))
1896 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
);
1898 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
) {
1899 pipe
.StateCacheInvalidationEnable
=
1900 bits
& ANV_PIPE_STATE_CACHE_INVALIDATE_BIT
;
1901 pipe
.ConstantCacheInvalidationEnable
=
1902 bits
& ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT
;
1903 pipe
.VFCacheInvalidationEnable
=
1904 bits
& ANV_PIPE_VF_CACHE_INVALIDATE_BIT
;
1905 pipe
.TextureCacheInvalidationEnable
=
1906 bits
& ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT
;
1907 pipe
.InstructionCacheInvalidateEnable
=
1908 bits
& ANV_PIPE_INSTRUCTION_CACHE_INVALIDATE_BIT
;
1910 /* From the SKL PRM, Vol. 2a, "PIPE_CONTROL",
1912 * "When VF Cache Invalidate is set “Post Sync Operation” must be
1913 * enabled to “Write Immediate Data” or “Write PS Depth Count” or
1914 * “Write Timestamp”.
1916 if (GEN_GEN
== 9 && pipe
.VFCacheInvalidationEnable
) {
1917 pipe
.PostSyncOperation
= WriteImmediateData
;
1919 (struct anv_address
) { cmd_buffer
->device
->workaround_bo
, 0 };
1923 bits
&= ~ANV_PIPE_INVALIDATE_BITS
;
1926 cmd_buffer
->state
.pending_pipe_bits
= bits
;
1929 void genX(CmdPipelineBarrier
)(
1930 VkCommandBuffer commandBuffer
,
1931 VkPipelineStageFlags srcStageMask
,
1932 VkPipelineStageFlags destStageMask
,
1934 uint32_t memoryBarrierCount
,
1935 const VkMemoryBarrier
* pMemoryBarriers
,
1936 uint32_t bufferMemoryBarrierCount
,
1937 const VkBufferMemoryBarrier
* pBufferMemoryBarriers
,
1938 uint32_t imageMemoryBarrierCount
,
1939 const VkImageMemoryBarrier
* pImageMemoryBarriers
)
1941 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
1943 /* XXX: Right now, we're really dumb and just flush whatever categories
1944 * the app asks for. One of these days we may make this a bit better
1945 * but right now that's all the hardware allows for in most areas.
1947 VkAccessFlags src_flags
= 0;
1948 VkAccessFlags dst_flags
= 0;
1950 for (uint32_t i
= 0; i
< memoryBarrierCount
; i
++) {
1951 src_flags
|= pMemoryBarriers
[i
].srcAccessMask
;
1952 dst_flags
|= pMemoryBarriers
[i
].dstAccessMask
;
1955 for (uint32_t i
= 0; i
< bufferMemoryBarrierCount
; i
++) {
1956 src_flags
|= pBufferMemoryBarriers
[i
].srcAccessMask
;
1957 dst_flags
|= pBufferMemoryBarriers
[i
].dstAccessMask
;
1960 for (uint32_t i
= 0; i
< imageMemoryBarrierCount
; i
++) {
1961 src_flags
|= pImageMemoryBarriers
[i
].srcAccessMask
;
1962 dst_flags
|= pImageMemoryBarriers
[i
].dstAccessMask
;
1963 ANV_FROM_HANDLE(anv_image
, image
, pImageMemoryBarriers
[i
].image
);
1964 const VkImageSubresourceRange
*range
=
1965 &pImageMemoryBarriers
[i
].subresourceRange
;
1967 uint32_t base_layer
, layer_count
;
1968 if (image
->type
== VK_IMAGE_TYPE_3D
) {
1970 layer_count
= anv_minify(image
->extent
.depth
, range
->baseMipLevel
);
1972 base_layer
= range
->baseArrayLayer
;
1973 layer_count
= anv_get_layerCount(image
, range
);
1976 if (range
->aspectMask
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
1977 transition_depth_buffer(cmd_buffer
, image
,
1978 pImageMemoryBarriers
[i
].oldLayout
,
1979 pImageMemoryBarriers
[i
].newLayout
);
1982 if (range
->aspectMask
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
1983 transition_stencil_buffer(cmd_buffer
, image
,
1984 range
->baseMipLevel
,
1985 anv_get_levelCount(image
, range
),
1986 base_layer
, layer_count
,
1987 pImageMemoryBarriers
[i
].oldLayout
,
1988 pImageMemoryBarriers
[i
].newLayout
);
1991 if (range
->aspectMask
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) {
1992 VkImageAspectFlags color_aspects
=
1993 anv_image_expand_aspects(image
, range
->aspectMask
);
1994 uint32_t aspect_bit
;
1995 anv_foreach_image_aspect_bit(aspect_bit
, image
, color_aspects
) {
1996 transition_color_buffer(cmd_buffer
, image
, 1UL << aspect_bit
,
1997 range
->baseMipLevel
,
1998 anv_get_levelCount(image
, range
),
1999 base_layer
, layer_count
,
2000 pImageMemoryBarriers
[i
].oldLayout
,
2001 pImageMemoryBarriers
[i
].newLayout
);
2006 cmd_buffer
->state
.pending_pipe_bits
|=
2007 anv_pipe_flush_bits_for_access_flags(src_flags
) |
2008 anv_pipe_invalidate_bits_for_access_flags(dst_flags
);
2012 cmd_buffer_alloc_push_constants(struct anv_cmd_buffer
*cmd_buffer
)
2014 VkShaderStageFlags stages
=
2015 cmd_buffer
->state
.gfx
.base
.pipeline
->active_stages
;
2017 /* In order to avoid thrash, we assume that vertex and fragment stages
2018 * always exist. In the rare case where one is missing *and* the other
2019 * uses push concstants, this may be suboptimal. However, avoiding stalls
2020 * seems more important.
2022 stages
|= VK_SHADER_STAGE_FRAGMENT_BIT
| VK_SHADER_STAGE_VERTEX_BIT
;
2024 if (stages
== cmd_buffer
->state
.push_constant_stages
)
2028 const unsigned push_constant_kb
= 32;
2029 #elif GEN_IS_HASWELL
2030 const unsigned push_constant_kb
= cmd_buffer
->device
->info
.gt
== 3 ? 32 : 16;
2032 const unsigned push_constant_kb
= 16;
2035 const unsigned num_stages
=
2036 util_bitcount(stages
& VK_SHADER_STAGE_ALL_GRAPHICS
);
2037 unsigned size_per_stage
= push_constant_kb
/ num_stages
;
2039 /* Broadwell+ and Haswell gt3 require that the push constant sizes be in
2040 * units of 2KB. Incidentally, these are the same platforms that have
2041 * 32KB worth of push constant space.
2043 if (push_constant_kb
== 32)
2044 size_per_stage
&= ~1u;
2046 uint32_t kb_used
= 0;
2047 for (int i
= MESA_SHADER_VERTEX
; i
< MESA_SHADER_FRAGMENT
; i
++) {
2048 unsigned push_size
= (stages
& (1 << i
)) ? size_per_stage
: 0;
2049 anv_batch_emit(&cmd_buffer
->batch
,
2050 GENX(3DSTATE_PUSH_CONSTANT_ALLOC_VS
), alloc
) {
2051 alloc
._3DCommandSubOpcode
= 18 + i
;
2052 alloc
.ConstantBufferOffset
= (push_size
> 0) ? kb_used
: 0;
2053 alloc
.ConstantBufferSize
= push_size
;
2055 kb_used
+= push_size
;
2058 anv_batch_emit(&cmd_buffer
->batch
,
2059 GENX(3DSTATE_PUSH_CONSTANT_ALLOC_PS
), alloc
) {
2060 alloc
.ConstantBufferOffset
= kb_used
;
2061 alloc
.ConstantBufferSize
= push_constant_kb
- kb_used
;
2064 cmd_buffer
->state
.push_constant_stages
= stages
;
2066 /* From the BDW PRM for 3DSTATE_PUSH_CONSTANT_ALLOC_VS:
2068 * "The 3DSTATE_CONSTANT_VS must be reprogrammed prior to
2069 * the next 3DPRIMITIVE command after programming the
2070 * 3DSTATE_PUSH_CONSTANT_ALLOC_VS"
2072 * Since 3DSTATE_PUSH_CONSTANT_ALLOC_VS is programmed as part of
2073 * pipeline setup, we need to dirty push constants.
2075 cmd_buffer
->state
.push_constants_dirty
|= VK_SHADER_STAGE_ALL_GRAPHICS
;
2078 static struct anv_address
2079 anv_descriptor_set_address(struct anv_cmd_buffer
*cmd_buffer
,
2080 struct anv_descriptor_set
*set
)
2083 /* This is a normal descriptor set */
2084 return (struct anv_address
) {
2085 .bo
= set
->pool
->bo
,
2086 .offset
= set
->desc_mem
.offset
,
2089 /* This is a push descriptor set. We have to flag it as used on the GPU
2090 * so that the next time we push descriptors, we grab a new memory.
2092 struct anv_push_descriptor_set
*push_set
=
2093 (struct anv_push_descriptor_set
*)set
;
2094 push_set
->set_used_on_gpu
= true;
2096 return (struct anv_address
) {
2097 .bo
= cmd_buffer
->dynamic_state_stream
.state_pool
->block_pool
.bo
,
2098 .offset
= set
->desc_mem
.offset
,
2104 emit_binding_table(struct anv_cmd_buffer
*cmd_buffer
,
2105 gl_shader_stage stage
,
2106 struct anv_state
*bt_state
)
2108 struct anv_subpass
*subpass
= cmd_buffer
->state
.subpass
;
2109 struct anv_cmd_pipeline_state
*pipe_state
;
2110 struct anv_pipeline
*pipeline
;
2111 uint32_t state_offset
;
2114 case MESA_SHADER_COMPUTE
:
2115 pipe_state
= &cmd_buffer
->state
.compute
.base
;
2118 pipe_state
= &cmd_buffer
->state
.gfx
.base
;
2121 pipeline
= pipe_state
->pipeline
;
2123 if (!anv_pipeline_has_stage(pipeline
, stage
)) {
2124 *bt_state
= (struct anv_state
) { 0, };
2128 struct anv_pipeline_bind_map
*map
= &pipeline
->shaders
[stage
]->bind_map
;
2129 if (map
->surface_count
== 0) {
2130 *bt_state
= (struct anv_state
) { 0, };
2134 *bt_state
= anv_cmd_buffer_alloc_binding_table(cmd_buffer
,
2137 uint32_t *bt_map
= bt_state
->map
;
2139 if (bt_state
->map
== NULL
)
2140 return VK_ERROR_OUT_OF_DEVICE_MEMORY
;
2142 /* We only need to emit relocs if we're not using softpin. If we are using
2143 * softpin then we always keep all user-allocated memory objects resident.
2145 const bool need_client_mem_relocs
=
2146 !cmd_buffer
->device
->instance
->physicalDevice
.use_softpin
;
2148 for (uint32_t s
= 0; s
< map
->surface_count
; s
++) {
2149 struct anv_pipeline_binding
*binding
= &map
->surface_to_descriptor
[s
];
2151 struct anv_state surface_state
;
2153 switch (binding
->set
) {
2154 case ANV_DESCRIPTOR_SET_NULL
:
2158 case ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS
:
2159 /* Color attachment binding */
2160 assert(stage
== MESA_SHADER_FRAGMENT
);
2161 if (binding
->index
< subpass
->color_count
) {
2162 const unsigned att
=
2163 subpass
->color_attachments
[binding
->index
].attachment
;
2165 /* From the Vulkan 1.0.46 spec:
2167 * "If any color or depth/stencil attachments are
2168 * VK_ATTACHMENT_UNUSED, then no writes occur for those
2171 if (att
== VK_ATTACHMENT_UNUSED
) {
2172 surface_state
= cmd_buffer
->state
.null_surface_state
;
2174 surface_state
= cmd_buffer
->state
.attachments
[att
].color
.state
;
2177 surface_state
= cmd_buffer
->state
.null_surface_state
;
2180 bt_map
[s
] = surface_state
.offset
+ state_offset
;
2183 case ANV_DESCRIPTOR_SET_SHADER_CONSTANTS
: {
2184 struct anv_state surface_state
=
2185 anv_cmd_buffer_alloc_surface_state(cmd_buffer
);
2187 struct anv_address constant_data
= {
2188 .bo
= pipeline
->device
->dynamic_state_pool
.block_pool
.bo
,
2189 .offset
= pipeline
->shaders
[stage
]->constant_data
.offset
,
2191 unsigned constant_data_size
=
2192 pipeline
->shaders
[stage
]->constant_data_size
;
2194 const enum isl_format format
=
2195 anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER
);
2196 anv_fill_buffer_surface_state(cmd_buffer
->device
,
2197 surface_state
, format
,
2198 constant_data
, constant_data_size
, 1);
2200 bt_map
[s
] = surface_state
.offset
+ state_offset
;
2201 add_surface_reloc(cmd_buffer
, surface_state
, constant_data
);
2205 case ANV_DESCRIPTOR_SET_NUM_WORK_GROUPS
: {
2206 /* This is always the first binding for compute shaders */
2207 assert(stage
== MESA_SHADER_COMPUTE
&& s
== 0);
2209 struct anv_state surface_state
=
2210 anv_cmd_buffer_alloc_surface_state(cmd_buffer
);
2212 const enum isl_format format
=
2213 anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_STORAGE_BUFFER
);
2214 anv_fill_buffer_surface_state(cmd_buffer
->device
, surface_state
,
2216 cmd_buffer
->state
.compute
.num_workgroups
,
2218 bt_map
[s
] = surface_state
.offset
+ state_offset
;
2219 if (need_client_mem_relocs
) {
2220 add_surface_reloc(cmd_buffer
, surface_state
,
2221 cmd_buffer
->state
.compute
.num_workgroups
);
2226 case ANV_DESCRIPTOR_SET_DESCRIPTORS
: {
2227 /* This is a descriptor set buffer so the set index is actually
2228 * given by binding->binding. (Yes, that's confusing.)
2230 struct anv_descriptor_set
*set
=
2231 pipe_state
->descriptors
[binding
->index
];
2232 assert(set
->desc_mem
.alloc_size
);
2233 assert(set
->desc_surface_state
.alloc_size
);
2234 bt_map
[s
] = set
->desc_surface_state
.offset
+ state_offset
;
2235 add_surface_reloc(cmd_buffer
, set
->desc_surface_state
,
2236 anv_descriptor_set_address(cmd_buffer
, set
));
2241 assert(binding
->set
< MAX_SETS
);
2242 const struct anv_descriptor
*desc
=
2243 &pipe_state
->descriptors
[binding
->set
]->descriptors
[binding
->index
];
2245 switch (desc
->type
) {
2246 case VK_DESCRIPTOR_TYPE_SAMPLER
:
2247 /* Nothing for us to do here */
2250 case VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
:
2251 case VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE
: {
2252 struct anv_surface_state sstate
=
2253 (desc
->layout
== VK_IMAGE_LAYOUT_GENERAL
) ?
2254 desc
->image_view
->planes
[binding
->plane
].general_sampler_surface_state
:
2255 desc
->image_view
->planes
[binding
->plane
].optimal_sampler_surface_state
;
2256 surface_state
= sstate
.state
;
2257 assert(surface_state
.alloc_size
);
2258 if (need_client_mem_relocs
)
2259 add_surface_state_relocs(cmd_buffer
, sstate
);
2262 case VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT
:
2263 assert(stage
== MESA_SHADER_FRAGMENT
);
2264 if ((desc
->image_view
->aspect_mask
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) == 0) {
2265 /* For depth and stencil input attachments, we treat it like any
2266 * old texture that a user may have bound.
2268 assert(desc
->image_view
->n_planes
== 1);
2269 struct anv_surface_state sstate
=
2270 (desc
->layout
== VK_IMAGE_LAYOUT_GENERAL
) ?
2271 desc
->image_view
->planes
[0].general_sampler_surface_state
:
2272 desc
->image_view
->planes
[0].optimal_sampler_surface_state
;
2273 surface_state
= sstate
.state
;
2274 assert(surface_state
.alloc_size
);
2275 if (need_client_mem_relocs
)
2276 add_surface_state_relocs(cmd_buffer
, sstate
);
2278 /* For color input attachments, we create the surface state at
2279 * vkBeginRenderPass time so that we can include aux and clear
2280 * color information.
2282 assert(binding
->input_attachment_index
< subpass
->input_count
);
2283 const unsigned subpass_att
= binding
->input_attachment_index
;
2284 const unsigned att
= subpass
->input_attachments
[subpass_att
].attachment
;
2285 surface_state
= cmd_buffer
->state
.attachments
[att
].input
.state
;
2289 case VK_DESCRIPTOR_TYPE_STORAGE_IMAGE
: {
2290 struct anv_surface_state sstate
= (binding
->write_only
)
2291 ? desc
->image_view
->planes
[binding
->plane
].writeonly_storage_surface_state
2292 : desc
->image_view
->planes
[binding
->plane
].storage_surface_state
;
2293 surface_state
= sstate
.state
;
2294 assert(surface_state
.alloc_size
);
2295 if (need_client_mem_relocs
)
2296 add_surface_state_relocs(cmd_buffer
, sstate
);
2300 case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER
:
2301 case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER
:
2302 case VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER
:
2303 surface_state
= desc
->buffer_view
->surface_state
;
2304 assert(surface_state
.alloc_size
);
2305 if (need_client_mem_relocs
) {
2306 add_surface_reloc(cmd_buffer
, surface_state
,
2307 desc
->buffer_view
->address
);
2311 case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC
:
2312 case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC
: {
2313 /* Compute the offset within the buffer */
2314 struct anv_push_constants
*push
=
2315 &cmd_buffer
->state
.push_constants
[stage
];
2317 uint32_t dynamic_offset
=
2318 push
->dynamic_offsets
[binding
->dynamic_offset_index
];
2319 uint64_t offset
= desc
->offset
+ dynamic_offset
;
2320 /* Clamp to the buffer size */
2321 offset
= MIN2(offset
, desc
->buffer
->size
);
2322 /* Clamp the range to the buffer size */
2323 uint32_t range
= MIN2(desc
->range
, desc
->buffer
->size
- offset
);
2325 struct anv_address address
=
2326 anv_address_add(desc
->buffer
->address
, offset
);
2329 anv_state_stream_alloc(&cmd_buffer
->surface_state_stream
, 64, 64);
2330 enum isl_format format
=
2331 anv_isl_format_for_descriptor_type(desc
->type
);
2333 anv_fill_buffer_surface_state(cmd_buffer
->device
, surface_state
,
2334 format
, address
, range
, 1);
2335 if (need_client_mem_relocs
)
2336 add_surface_reloc(cmd_buffer
, surface_state
, address
);
2340 case VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER
:
2341 surface_state
= (binding
->write_only
)
2342 ? desc
->buffer_view
->writeonly_storage_surface_state
2343 : desc
->buffer_view
->storage_surface_state
;
2344 assert(surface_state
.alloc_size
);
2345 if (need_client_mem_relocs
) {
2346 add_surface_reloc(cmd_buffer
, surface_state
,
2347 desc
->buffer_view
->address
);
2352 assert(!"Invalid descriptor type");
2355 bt_map
[s
] = surface_state
.offset
+ state_offset
;
2365 emit_samplers(struct anv_cmd_buffer
*cmd_buffer
,
2366 gl_shader_stage stage
,
2367 struct anv_state
*state
)
2369 struct anv_cmd_pipeline_state
*pipe_state
=
2370 stage
== MESA_SHADER_COMPUTE
? &cmd_buffer
->state
.compute
.base
:
2371 &cmd_buffer
->state
.gfx
.base
;
2372 struct anv_pipeline
*pipeline
= pipe_state
->pipeline
;
2374 if (!anv_pipeline_has_stage(pipeline
, stage
)) {
2375 *state
= (struct anv_state
) { 0, };
2379 struct anv_pipeline_bind_map
*map
= &pipeline
->shaders
[stage
]->bind_map
;
2380 if (map
->sampler_count
== 0) {
2381 *state
= (struct anv_state
) { 0, };
2385 uint32_t size
= map
->sampler_count
* 16;
2386 *state
= anv_cmd_buffer_alloc_dynamic_state(cmd_buffer
, size
, 32);
2388 if (state
->map
== NULL
)
2389 return VK_ERROR_OUT_OF_DEVICE_MEMORY
;
2391 for (uint32_t s
= 0; s
< map
->sampler_count
; s
++) {
2392 struct anv_pipeline_binding
*binding
= &map
->sampler_to_descriptor
[s
];
2393 const struct anv_descriptor
*desc
=
2394 &pipe_state
->descriptors
[binding
->set
]->descriptors
[binding
->index
];
2396 if (desc
->type
!= VK_DESCRIPTOR_TYPE_SAMPLER
&&
2397 desc
->type
!= VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER
)
2400 struct anv_sampler
*sampler
= desc
->sampler
;
2402 /* This can happen if we have an unfilled slot since TYPE_SAMPLER
2403 * happens to be zero.
2405 if (sampler
== NULL
)
2408 memcpy(state
->map
+ (s
* 16),
2409 sampler
->state
[binding
->plane
], sizeof(sampler
->state
[0]));
2416 flush_descriptor_sets(struct anv_cmd_buffer
*cmd_buffer
)
2418 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
2420 VkShaderStageFlags dirty
= cmd_buffer
->state
.descriptors_dirty
&
2421 pipeline
->active_stages
;
2423 VkResult result
= VK_SUCCESS
;
2424 anv_foreach_stage(s
, dirty
) {
2425 result
= emit_samplers(cmd_buffer
, s
, &cmd_buffer
->state
.samplers
[s
]);
2426 if (result
!= VK_SUCCESS
)
2428 result
= emit_binding_table(cmd_buffer
, s
,
2429 &cmd_buffer
->state
.binding_tables
[s
]);
2430 if (result
!= VK_SUCCESS
)
2434 if (result
!= VK_SUCCESS
) {
2435 assert(result
== VK_ERROR_OUT_OF_DEVICE_MEMORY
);
2437 result
= anv_cmd_buffer_new_binding_table_block(cmd_buffer
);
2438 if (result
!= VK_SUCCESS
)
2441 /* Re-emit state base addresses so we get the new surface state base
2442 * address before we start emitting binding tables etc.
2444 genX(cmd_buffer_emit_state_base_address
)(cmd_buffer
);
2446 /* Re-emit all active binding tables */
2447 dirty
|= pipeline
->active_stages
;
2448 anv_foreach_stage(s
, dirty
) {
2449 result
= emit_samplers(cmd_buffer
, s
, &cmd_buffer
->state
.samplers
[s
]);
2450 if (result
!= VK_SUCCESS
) {
2451 anv_batch_set_error(&cmd_buffer
->batch
, result
);
2454 result
= emit_binding_table(cmd_buffer
, s
,
2455 &cmd_buffer
->state
.binding_tables
[s
]);
2456 if (result
!= VK_SUCCESS
) {
2457 anv_batch_set_error(&cmd_buffer
->batch
, result
);
2463 cmd_buffer
->state
.descriptors_dirty
&= ~dirty
;
2469 cmd_buffer_emit_descriptor_pointers(struct anv_cmd_buffer
*cmd_buffer
,
2472 static const uint32_t sampler_state_opcodes
[] = {
2473 [MESA_SHADER_VERTEX
] = 43,
2474 [MESA_SHADER_TESS_CTRL
] = 44, /* HS */
2475 [MESA_SHADER_TESS_EVAL
] = 45, /* DS */
2476 [MESA_SHADER_GEOMETRY
] = 46,
2477 [MESA_SHADER_FRAGMENT
] = 47,
2478 [MESA_SHADER_COMPUTE
] = 0,
2481 static const uint32_t binding_table_opcodes
[] = {
2482 [MESA_SHADER_VERTEX
] = 38,
2483 [MESA_SHADER_TESS_CTRL
] = 39,
2484 [MESA_SHADER_TESS_EVAL
] = 40,
2485 [MESA_SHADER_GEOMETRY
] = 41,
2486 [MESA_SHADER_FRAGMENT
] = 42,
2487 [MESA_SHADER_COMPUTE
] = 0,
2490 anv_foreach_stage(s
, stages
) {
2491 assert(s
< ARRAY_SIZE(binding_table_opcodes
));
2492 assert(binding_table_opcodes
[s
] > 0);
2494 if (cmd_buffer
->state
.samplers
[s
].alloc_size
> 0) {
2495 anv_batch_emit(&cmd_buffer
->batch
,
2496 GENX(3DSTATE_SAMPLER_STATE_POINTERS_VS
), ssp
) {
2497 ssp
._3DCommandSubOpcode
= sampler_state_opcodes
[s
];
2498 ssp
.PointertoVSSamplerState
= cmd_buffer
->state
.samplers
[s
].offset
;
2502 /* Always emit binding table pointers if we're asked to, since on SKL
2503 * this is what flushes push constants. */
2504 anv_batch_emit(&cmd_buffer
->batch
,
2505 GENX(3DSTATE_BINDING_TABLE_POINTERS_VS
), btp
) {
2506 btp
._3DCommandSubOpcode
= binding_table_opcodes
[s
];
2507 btp
.PointertoVSBindingTable
= cmd_buffer
->state
.binding_tables
[s
].offset
;
2513 cmd_buffer_flush_push_constants(struct anv_cmd_buffer
*cmd_buffer
,
2514 VkShaderStageFlags dirty_stages
)
2516 const struct anv_cmd_graphics_state
*gfx_state
= &cmd_buffer
->state
.gfx
;
2517 const struct anv_pipeline
*pipeline
= gfx_state
->base
.pipeline
;
2519 static const uint32_t push_constant_opcodes
[] = {
2520 [MESA_SHADER_VERTEX
] = 21,
2521 [MESA_SHADER_TESS_CTRL
] = 25, /* HS */
2522 [MESA_SHADER_TESS_EVAL
] = 26, /* DS */
2523 [MESA_SHADER_GEOMETRY
] = 22,
2524 [MESA_SHADER_FRAGMENT
] = 23,
2525 [MESA_SHADER_COMPUTE
] = 0,
2528 VkShaderStageFlags flushed
= 0;
2530 anv_foreach_stage(stage
, dirty_stages
) {
2531 assert(stage
< ARRAY_SIZE(push_constant_opcodes
));
2532 assert(push_constant_opcodes
[stage
] > 0);
2534 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DSTATE_CONSTANT_VS
), c
) {
2535 c
._3DCommandSubOpcode
= push_constant_opcodes
[stage
];
2537 if (anv_pipeline_has_stage(pipeline
, stage
)) {
2538 const struct anv_pipeline_bind_map
*bind_map
=
2539 &pipeline
->shaders
[stage
]->bind_map
;
2541 #if GEN_GEN >= 8 || GEN_IS_HASWELL
2542 unsigned buffer_count
= 0;
2543 for (unsigned i
= 0; i
< 4; i
++) {
2544 const struct anv_push_range
*range
= &bind_map
->push_ranges
[i
];
2545 if (range
->length
> 0)
2549 /* The Skylake PRM contains the following restriction:
2551 * "The driver must ensure The following case does not occur
2552 * without a flush to the 3D engine: 3DSTATE_CONSTANT_* with
2553 * buffer 3 read length equal to zero committed followed by a
2554 * 3DSTATE_CONSTANT_* with buffer 0 read length not equal to
2557 * To avoid this, we program the buffers in the highest slots.
2558 * This way, slot 0 is only used if slot 3 is also used.
2560 assert(buffer_count
<= 4);
2561 const unsigned shift
= 4 - buffer_count
;
2562 for (unsigned i
= 0; i
< buffer_count
; i
++) {
2563 const struct anv_push_range
*range
= &bind_map
->push_ranges
[i
];
2565 /* At this point we only have non-empty ranges */
2566 assert(range
->length
> 0);
2568 struct anv_address addr
;
2569 switch (range
->set
) {
2570 case ANV_DESCRIPTOR_SET_DESCRIPTORS
: {
2571 /* This is a descriptor set buffer so the set index is
2572 * actually given by binding->binding. (Yes, that's
2575 struct anv_descriptor_set
*set
=
2576 gfx_state
->base
.descriptors
[range
->index
];
2577 addr
= anv_descriptor_set_address(cmd_buffer
, set
);
2581 case ANV_DESCRIPTOR_SET_PUSH_CONSTANTS
: {
2582 struct anv_state state
=
2583 anv_cmd_buffer_push_constants(cmd_buffer
, stage
);
2584 addr
= (struct anv_address
) {
2585 .bo
= cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
2586 .offset
= state
.offset
,
2592 assert(range
->set
< MAX_SETS
);
2593 struct anv_descriptor_set
*set
=
2594 gfx_state
->base
.descriptors
[range
->set
];
2595 const struct anv_descriptor
*desc
=
2596 &set
->descriptors
[range
->index
];
2598 if (desc
->type
== VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER
) {
2599 addr
= desc
->buffer_view
->address
;
2601 assert(desc
->type
== VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC
);
2602 struct anv_push_constants
*push
=
2603 &cmd_buffer
->state
.push_constants
[stage
];
2604 uint32_t dynamic_offset
=
2605 push
->dynamic_offsets
[range
->dynamic_offset_index
];
2606 addr
= anv_address_add(desc
->buffer
->address
,
2607 desc
->offset
+ dynamic_offset
);
2612 c
.ConstantBody
.ReadLength
[i
+ shift
] = range
->length
;
2613 c
.ConstantBody
.Buffer
[i
+ shift
] =
2614 anv_address_add(addr
, range
->start
* 32);
2617 /* For Ivy Bridge, push constants are relative to dynamic state
2618 * base address and we only ever push actual push constants.
2620 if (bind_map
->push_ranges
[0].length
> 0) {
2621 assert(bind_map
->push_ranges
[0].set
==
2622 ANV_DESCRIPTOR_SET_PUSH_CONSTANTS
);
2623 struct anv_state state
=
2624 anv_cmd_buffer_push_constants(cmd_buffer
, stage
);
2625 c
.ConstantBody
.ReadLength
[0] = bind_map
->push_ranges
[0].length
;
2626 c
.ConstantBody
.Buffer
[0].offset
= state
.offset
;
2628 assert(bind_map
->push_ranges
[1].length
== 0);
2629 assert(bind_map
->push_ranges
[2].length
== 0);
2630 assert(bind_map
->push_ranges
[3].length
== 0);
2635 flushed
|= mesa_to_vk_shader_stage(stage
);
2638 cmd_buffer
->state
.push_constants_dirty
&= ~flushed
;
2643 genX(cmd_buffer_aux_map_state
)(struct anv_cmd_buffer
*cmd_buffer
)
2645 void *aux_map_ctx
= cmd_buffer
->device
->aux_map_ctx
;
2648 uint32_t aux_map_state_num
= gen_aux_map_get_state_num(aux_map_ctx
);
2649 if (cmd_buffer
->state
.last_aux_map_state
!= aux_map_state_num
) {
2650 /* If the aux-map state number increased, then we need to rewrite the
2651 * register. Rewriting the register is used to both set the aux-map
2652 * translation table address, and also to invalidate any previously
2653 * cached translations.
2655 uint64_t base_addr
= gen_aux_map_get_base(aux_map_ctx
);
2656 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_LOAD_REGISTER_IMM
), lri
) {
2657 lri
.RegisterOffset
= GENX(GFX_AUX_TABLE_BASE_ADDR_num
);
2658 lri
.DataDWord
= base_addr
& 0xffffffff;
2660 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_LOAD_REGISTER_IMM
), lri
) {
2661 lri
.RegisterOffset
= GENX(GFX_AUX_TABLE_BASE_ADDR_num
) + 4;
2662 lri
.DataDWord
= base_addr
>> 32;
2664 cmd_buffer
->state
.last_aux_map_state
= aux_map_state_num
;
2670 genX(cmd_buffer_flush_state
)(struct anv_cmd_buffer
*cmd_buffer
)
2672 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
2675 uint32_t vb_emit
= cmd_buffer
->state
.gfx
.vb_dirty
& pipeline
->vb_used
;
2676 if (cmd_buffer
->state
.gfx
.dirty
& ANV_CMD_DIRTY_PIPELINE
)
2677 vb_emit
|= pipeline
->vb_used
;
2679 assert((pipeline
->active_stages
& VK_SHADER_STAGE_COMPUTE_BIT
) == 0);
2681 genX(cmd_buffer_config_l3
)(cmd_buffer
, pipeline
->urb
.l3_config
);
2683 genX(cmd_buffer_emit_hashing_mode
)(cmd_buffer
, UINT_MAX
, UINT_MAX
, 1);
2685 genX(flush_pipeline_select_3d
)(cmd_buffer
);
2688 genX(cmd_buffer_aux_map_state
)(cmd_buffer
);
2692 const uint32_t num_buffers
= __builtin_popcount(vb_emit
);
2693 const uint32_t num_dwords
= 1 + num_buffers
* 4;
2695 p
= anv_batch_emitn(&cmd_buffer
->batch
, num_dwords
,
2696 GENX(3DSTATE_VERTEX_BUFFERS
));
2698 for_each_bit(vb
, vb_emit
) {
2699 struct anv_buffer
*buffer
= cmd_buffer
->state
.vertex_bindings
[vb
].buffer
;
2700 uint32_t offset
= cmd_buffer
->state
.vertex_bindings
[vb
].offset
;
2702 struct GENX(VERTEX_BUFFER_STATE
) state
= {
2703 .VertexBufferIndex
= vb
,
2705 .MOCS
= anv_mocs_for_bo(cmd_buffer
->device
, buffer
->address
.bo
),
2707 .BufferAccessType
= pipeline
->vb
[vb
].instanced
? INSTANCEDATA
: VERTEXDATA
,
2708 .InstanceDataStepRate
= pipeline
->vb
[vb
].instance_divisor
,
2711 .AddressModifyEnable
= true,
2712 .BufferPitch
= pipeline
->vb
[vb
].stride
,
2713 .BufferStartingAddress
= anv_address_add(buffer
->address
, offset
),
2716 .BufferSize
= buffer
->size
- offset
2718 .EndAddress
= anv_address_add(buffer
->address
, buffer
->size
- 1),
2722 GENX(VERTEX_BUFFER_STATE_pack
)(&cmd_buffer
->batch
, &p
[1 + i
* 4], &state
);
2727 cmd_buffer
->state
.gfx
.vb_dirty
&= ~vb_emit
;
2730 if (cmd_buffer
->state
.gfx
.dirty
& ANV_CMD_DIRTY_XFB_ENABLE
) {
2731 /* We don't need any per-buffer dirty tracking because you're not
2732 * allowed to bind different XFB buffers while XFB is enabled.
2734 for (unsigned idx
= 0; idx
< MAX_XFB_BUFFERS
; idx
++) {
2735 struct anv_xfb_binding
*xfb
= &cmd_buffer
->state
.xfb_bindings
[idx
];
2736 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DSTATE_SO_BUFFER
), sob
) {
2738 sob
.SOBufferIndex
= idx
;
2740 sob
._3DCommandOpcode
= 0;
2741 sob
._3DCommandSubOpcode
= SO_BUFFER_INDEX_0_CMD
+ idx
;
2744 if (cmd_buffer
->state
.xfb_enabled
&& xfb
->buffer
&& xfb
->size
!= 0) {
2745 sob
.SOBufferEnable
= true;
2746 sob
.MOCS
= cmd_buffer
->device
->isl_dev
.mocs
.internal
,
2747 sob
.StreamOffsetWriteEnable
= false;
2748 sob
.SurfaceBaseAddress
= anv_address_add(xfb
->buffer
->address
,
2750 /* Size is in DWords - 1 */
2751 sob
.SurfaceSize
= xfb
->size
/ 4 - 1;
2756 /* CNL and later require a CS stall after 3DSTATE_SO_BUFFER */
2758 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_CS_STALL_BIT
;
2762 if (cmd_buffer
->state
.gfx
.dirty
& ANV_CMD_DIRTY_PIPELINE
) {
2763 anv_batch_emit_batch(&cmd_buffer
->batch
, &pipeline
->batch
);
2765 /* If the pipeline changed, we may need to re-allocate push constant
2768 cmd_buffer_alloc_push_constants(cmd_buffer
);
2772 if (cmd_buffer
->state
.descriptors_dirty
& VK_SHADER_STAGE_VERTEX_BIT
||
2773 cmd_buffer
->state
.push_constants_dirty
& VK_SHADER_STAGE_VERTEX_BIT
) {
2774 /* From the IVB PRM Vol. 2, Part 1, Section 3.2.1:
2776 * "A PIPE_CONTROL with Post-Sync Operation set to 1h and a depth
2777 * stall needs to be sent just prior to any 3DSTATE_VS,
2778 * 3DSTATE_URB_VS, 3DSTATE_CONSTANT_VS,
2779 * 3DSTATE_BINDING_TABLE_POINTER_VS,
2780 * 3DSTATE_SAMPLER_STATE_POINTER_VS command. Only one
2781 * PIPE_CONTROL needs to be sent before any combination of VS
2782 * associated 3DSTATE."
2784 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
2785 pc
.DepthStallEnable
= true;
2786 pc
.PostSyncOperation
= WriteImmediateData
;
2788 (struct anv_address
) { cmd_buffer
->device
->workaround_bo
, 0 };
2793 /* Render targets live in the same binding table as fragment descriptors */
2794 if (cmd_buffer
->state
.gfx
.dirty
& ANV_CMD_DIRTY_RENDER_TARGETS
)
2795 cmd_buffer
->state
.descriptors_dirty
|= VK_SHADER_STAGE_FRAGMENT_BIT
;
2797 /* We emit the binding tables and sampler tables first, then emit push
2798 * constants and then finally emit binding table and sampler table
2799 * pointers. It has to happen in this order, since emitting the binding
2800 * tables may change the push constants (in case of storage images). After
2801 * emitting push constants, on SKL+ we have to emit the corresponding
2802 * 3DSTATE_BINDING_TABLE_POINTER_* for the push constants to take effect.
2805 if (cmd_buffer
->state
.descriptors_dirty
)
2806 dirty
= flush_descriptor_sets(cmd_buffer
);
2808 if (dirty
|| cmd_buffer
->state
.push_constants_dirty
) {
2809 /* Because we're pushing UBOs, we have to push whenever either
2810 * descriptors or push constants is dirty.
2812 dirty
|= cmd_buffer
->state
.push_constants_dirty
;
2813 dirty
&= ANV_STAGE_MASK
& VK_SHADER_STAGE_ALL_GRAPHICS
;
2814 cmd_buffer_flush_push_constants(cmd_buffer
, dirty
);
2818 cmd_buffer_emit_descriptor_pointers(cmd_buffer
, dirty
);
2820 if (cmd_buffer
->state
.gfx
.dirty
& ANV_CMD_DIRTY_DYNAMIC_VIEWPORT
)
2821 gen8_cmd_buffer_emit_viewport(cmd_buffer
);
2823 if (cmd_buffer
->state
.gfx
.dirty
& (ANV_CMD_DIRTY_DYNAMIC_VIEWPORT
|
2824 ANV_CMD_DIRTY_PIPELINE
)) {
2825 gen8_cmd_buffer_emit_depth_viewport(cmd_buffer
,
2826 pipeline
->depth_clamp_enable
);
2829 if (cmd_buffer
->state
.gfx
.dirty
& (ANV_CMD_DIRTY_DYNAMIC_SCISSOR
|
2830 ANV_CMD_DIRTY_RENDER_TARGETS
))
2831 gen7_cmd_buffer_emit_scissor(cmd_buffer
);
2833 genX(cmd_buffer_flush_dynamic_state
)(cmd_buffer
);
2835 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
2839 emit_vertex_bo(struct anv_cmd_buffer
*cmd_buffer
,
2840 struct anv_address addr
,
2841 uint32_t size
, uint32_t index
)
2843 uint32_t *p
= anv_batch_emitn(&cmd_buffer
->batch
, 5,
2844 GENX(3DSTATE_VERTEX_BUFFERS
));
2846 GENX(VERTEX_BUFFER_STATE_pack
)(&cmd_buffer
->batch
, p
+ 1,
2847 &(struct GENX(VERTEX_BUFFER_STATE
)) {
2848 .VertexBufferIndex
= index
,
2849 .AddressModifyEnable
= true,
2851 .MOCS
= addr
.bo
? anv_mocs_for_bo(cmd_buffer
->device
, addr
.bo
) : 0,
2852 .NullVertexBuffer
= size
== 0,
2854 .BufferStartingAddress
= addr
,
2857 .BufferStartingAddress
= addr
,
2858 .EndAddress
= anv_address_add(addr
, size
),
2864 emit_base_vertex_instance_bo(struct anv_cmd_buffer
*cmd_buffer
,
2865 struct anv_address addr
)
2867 emit_vertex_bo(cmd_buffer
, addr
, addr
.bo
? 8 : 0, ANV_SVGS_VB_INDEX
);
2871 emit_base_vertex_instance(struct anv_cmd_buffer
*cmd_buffer
,
2872 uint32_t base_vertex
, uint32_t base_instance
)
2874 if (base_vertex
== 0 && base_instance
== 0) {
2875 emit_base_vertex_instance_bo(cmd_buffer
, ANV_NULL_ADDRESS
);
2877 struct anv_state id_state
=
2878 anv_cmd_buffer_alloc_dynamic_state(cmd_buffer
, 8, 4);
2880 ((uint32_t *)id_state
.map
)[0] = base_vertex
;
2881 ((uint32_t *)id_state
.map
)[1] = base_instance
;
2883 struct anv_address addr
= {
2884 .bo
= cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
2885 .offset
= id_state
.offset
,
2888 emit_base_vertex_instance_bo(cmd_buffer
, addr
);
2893 emit_draw_index(struct anv_cmd_buffer
*cmd_buffer
, uint32_t draw_index
)
2895 struct anv_state state
=
2896 anv_cmd_buffer_alloc_dynamic_state(cmd_buffer
, 4, 4);
2898 ((uint32_t *)state
.map
)[0] = draw_index
;
2900 struct anv_address addr
= {
2901 .bo
= cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
2902 .offset
= state
.offset
,
2905 emit_vertex_bo(cmd_buffer
, addr
, 4, ANV_DRAWID_VB_INDEX
);
2909 VkCommandBuffer commandBuffer
,
2910 uint32_t vertexCount
,
2911 uint32_t instanceCount
,
2912 uint32_t firstVertex
,
2913 uint32_t firstInstance
)
2915 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
2916 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
2917 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
2919 if (anv_batch_has_error(&cmd_buffer
->batch
))
2922 genX(cmd_buffer_flush_state
)(cmd_buffer
);
2924 if (cmd_buffer
->state
.conditional_render_enabled
)
2925 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
2927 if (vs_prog_data
->uses_firstvertex
||
2928 vs_prog_data
->uses_baseinstance
)
2929 emit_base_vertex_instance(cmd_buffer
, firstVertex
, firstInstance
);
2930 if (vs_prog_data
->uses_drawid
)
2931 emit_draw_index(cmd_buffer
, 0);
2933 /* Our implementation of VK_KHR_multiview uses instancing to draw the
2934 * different views. We need to multiply instanceCount by the view count.
2936 instanceCount
*= anv_subpass_view_count(cmd_buffer
->state
.subpass
);
2938 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
2939 prim
.PredicateEnable
= cmd_buffer
->state
.conditional_render_enabled
;
2940 prim
.VertexAccessType
= SEQUENTIAL
;
2941 prim
.PrimitiveTopologyType
= pipeline
->topology
;
2942 prim
.VertexCountPerInstance
= vertexCount
;
2943 prim
.StartVertexLocation
= firstVertex
;
2944 prim
.InstanceCount
= instanceCount
;
2945 prim
.StartInstanceLocation
= firstInstance
;
2946 prim
.BaseVertexLocation
= 0;
2950 void genX(CmdDrawIndexed
)(
2951 VkCommandBuffer commandBuffer
,
2952 uint32_t indexCount
,
2953 uint32_t instanceCount
,
2954 uint32_t firstIndex
,
2955 int32_t vertexOffset
,
2956 uint32_t firstInstance
)
2958 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
2959 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
2960 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
2962 if (anv_batch_has_error(&cmd_buffer
->batch
))
2965 genX(cmd_buffer_flush_state
)(cmd_buffer
);
2967 if (cmd_buffer
->state
.conditional_render_enabled
)
2968 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
2970 if (vs_prog_data
->uses_firstvertex
||
2971 vs_prog_data
->uses_baseinstance
)
2972 emit_base_vertex_instance(cmd_buffer
, vertexOffset
, firstInstance
);
2973 if (vs_prog_data
->uses_drawid
)
2974 emit_draw_index(cmd_buffer
, 0);
2976 /* Our implementation of VK_KHR_multiview uses instancing to draw the
2977 * different views. We need to multiply instanceCount by the view count.
2979 instanceCount
*= anv_subpass_view_count(cmd_buffer
->state
.subpass
);
2981 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
2982 prim
.PredicateEnable
= cmd_buffer
->state
.conditional_render_enabled
;
2983 prim
.VertexAccessType
= RANDOM
;
2984 prim
.PrimitiveTopologyType
= pipeline
->topology
;
2985 prim
.VertexCountPerInstance
= indexCount
;
2986 prim
.StartVertexLocation
= firstIndex
;
2987 prim
.InstanceCount
= instanceCount
;
2988 prim
.StartInstanceLocation
= firstInstance
;
2989 prim
.BaseVertexLocation
= vertexOffset
;
2993 /* Auto-Draw / Indirect Registers */
2994 #define GEN7_3DPRIM_END_OFFSET 0x2420
2995 #define GEN7_3DPRIM_START_VERTEX 0x2430
2996 #define GEN7_3DPRIM_VERTEX_COUNT 0x2434
2997 #define GEN7_3DPRIM_INSTANCE_COUNT 0x2438
2998 #define GEN7_3DPRIM_START_INSTANCE 0x243C
2999 #define GEN7_3DPRIM_BASE_VERTEX 0x2440
3001 void genX(CmdDrawIndirectByteCountEXT
)(
3002 VkCommandBuffer commandBuffer
,
3003 uint32_t instanceCount
,
3004 uint32_t firstInstance
,
3005 VkBuffer counterBuffer
,
3006 VkDeviceSize counterBufferOffset
,
3007 uint32_t counterOffset
,
3008 uint32_t vertexStride
)
3010 #if GEN_IS_HASWELL || GEN_GEN >= 8
3011 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3012 ANV_FROM_HANDLE(anv_buffer
, counter_buffer
, counterBuffer
);
3013 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
3014 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
3016 /* firstVertex is always zero for this draw function */
3017 const uint32_t firstVertex
= 0;
3019 if (anv_batch_has_error(&cmd_buffer
->batch
))
3022 genX(cmd_buffer_flush_state
)(cmd_buffer
);
3024 if (vs_prog_data
->uses_firstvertex
||
3025 vs_prog_data
->uses_baseinstance
)
3026 emit_base_vertex_instance(cmd_buffer
, firstVertex
, firstInstance
);
3027 if (vs_prog_data
->uses_drawid
)
3028 emit_draw_index(cmd_buffer
, 0);
3030 /* Our implementation of VK_KHR_multiview uses instancing to draw the
3031 * different views. We need to multiply instanceCount by the view count.
3033 instanceCount
*= anv_subpass_view_count(cmd_buffer
->state
.subpass
);
3035 struct gen_mi_builder b
;
3036 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3037 struct gen_mi_value count
=
3038 gen_mi_mem32(anv_address_add(counter_buffer
->address
,
3039 counterBufferOffset
));
3041 count
= gen_mi_isub(&b
, count
, gen_mi_imm(counterOffset
));
3042 count
= gen_mi_udiv32_imm(&b
, count
, vertexStride
);
3043 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_VERTEX_COUNT
), count
);
3045 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_START_VERTEX
),
3046 gen_mi_imm(firstVertex
));
3047 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_INSTANCE_COUNT
),
3048 gen_mi_imm(instanceCount
));
3049 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE
),
3050 gen_mi_imm(firstInstance
));
3051 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX
), gen_mi_imm(0));
3053 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
3054 prim
.IndirectParameterEnable
= true;
3055 prim
.VertexAccessType
= SEQUENTIAL
;
3056 prim
.PrimitiveTopologyType
= pipeline
->topology
;
3058 #endif /* GEN_IS_HASWELL || GEN_GEN >= 8 */
3062 load_indirect_parameters(struct anv_cmd_buffer
*cmd_buffer
,
3063 struct anv_address addr
,
3066 struct gen_mi_builder b
;
3067 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3069 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_VERTEX_COUNT
),
3070 gen_mi_mem32(anv_address_add(addr
, 0)));
3072 struct gen_mi_value instance_count
= gen_mi_mem32(anv_address_add(addr
, 4));
3073 unsigned view_count
= anv_subpass_view_count(cmd_buffer
->state
.subpass
);
3074 if (view_count
> 1) {
3075 #if GEN_IS_HASWELL || GEN_GEN >= 8
3076 instance_count
= gen_mi_imul_imm(&b
, instance_count
, view_count
);
3078 anv_finishme("Multiview + indirect draw requires MI_MATH; "
3079 "MI_MATH is not supported on Ivy Bridge");
3082 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_INSTANCE_COUNT
), instance_count
);
3084 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_START_VERTEX
),
3085 gen_mi_mem32(anv_address_add(addr
, 8)));
3088 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX
),
3089 gen_mi_mem32(anv_address_add(addr
, 12)));
3090 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE
),
3091 gen_mi_mem32(anv_address_add(addr
, 16)));
3093 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE
),
3094 gen_mi_mem32(anv_address_add(addr
, 12)));
3095 gen_mi_store(&b
, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX
), gen_mi_imm(0));
3099 void genX(CmdDrawIndirect
)(
3100 VkCommandBuffer commandBuffer
,
3102 VkDeviceSize offset
,
3106 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3107 ANV_FROM_HANDLE(anv_buffer
, buffer
, _buffer
);
3108 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
3109 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
3111 if (anv_batch_has_error(&cmd_buffer
->batch
))
3114 genX(cmd_buffer_flush_state
)(cmd_buffer
);
3116 if (cmd_buffer
->state
.conditional_render_enabled
)
3117 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
3119 for (uint32_t i
= 0; i
< drawCount
; i
++) {
3120 struct anv_address draw
= anv_address_add(buffer
->address
, offset
);
3122 if (vs_prog_data
->uses_firstvertex
||
3123 vs_prog_data
->uses_baseinstance
)
3124 emit_base_vertex_instance_bo(cmd_buffer
, anv_address_add(draw
, 8));
3125 if (vs_prog_data
->uses_drawid
)
3126 emit_draw_index(cmd_buffer
, i
);
3128 load_indirect_parameters(cmd_buffer
, draw
, false);
3130 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
3131 prim
.IndirectParameterEnable
= true;
3132 prim
.PredicateEnable
= cmd_buffer
->state
.conditional_render_enabled
;
3133 prim
.VertexAccessType
= SEQUENTIAL
;
3134 prim
.PrimitiveTopologyType
= pipeline
->topology
;
3141 void genX(CmdDrawIndexedIndirect
)(
3142 VkCommandBuffer commandBuffer
,
3144 VkDeviceSize offset
,
3148 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3149 ANV_FROM_HANDLE(anv_buffer
, buffer
, _buffer
);
3150 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.gfx
.base
.pipeline
;
3151 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
3153 if (anv_batch_has_error(&cmd_buffer
->batch
))
3156 genX(cmd_buffer_flush_state
)(cmd_buffer
);
3158 if (cmd_buffer
->state
.conditional_render_enabled
)
3159 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
3161 for (uint32_t i
= 0; i
< drawCount
; i
++) {
3162 struct anv_address draw
= anv_address_add(buffer
->address
, offset
);
3164 /* TODO: We need to stomp base vertex to 0 somehow */
3165 if (vs_prog_data
->uses_firstvertex
||
3166 vs_prog_data
->uses_baseinstance
)
3167 emit_base_vertex_instance_bo(cmd_buffer
, anv_address_add(draw
, 12));
3168 if (vs_prog_data
->uses_drawid
)
3169 emit_draw_index(cmd_buffer
, i
);
3171 load_indirect_parameters(cmd_buffer
, draw
, true);
3173 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
3174 prim
.IndirectParameterEnable
= true;
3175 prim
.PredicateEnable
= cmd_buffer
->state
.conditional_render_enabled
;
3176 prim
.VertexAccessType
= RANDOM
;
3177 prim
.PrimitiveTopologyType
= pipeline
->topology
;
3184 #define TMP_DRAW_COUNT_REG 0x2670 /* MI_ALU_REG14 */
3187 prepare_for_draw_count_predicate(struct anv_cmd_buffer
*cmd_buffer
,
3188 struct anv_address count_address
,
3189 const bool conditional_render_enabled
)
3191 struct gen_mi_builder b
;
3192 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3194 if (conditional_render_enabled
) {
3195 #if GEN_GEN >= 8 || GEN_IS_HASWELL
3196 gen_mi_store(&b
, gen_mi_reg64(TMP_DRAW_COUNT_REG
),
3197 gen_mi_mem32(count_address
));
3200 /* Upload the current draw count from the draw parameters buffer to
3201 * MI_PREDICATE_SRC0.
3203 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
),
3204 gen_mi_mem32(count_address
));
3206 gen_mi_store(&b
, gen_mi_reg32(MI_PREDICATE_SRC1
+ 4), gen_mi_imm(0));
3211 emit_draw_count_predicate(struct anv_cmd_buffer
*cmd_buffer
,
3212 uint32_t draw_index
)
3214 struct gen_mi_builder b
;
3215 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3217 /* Upload the index of the current primitive to MI_PREDICATE_SRC1. */
3218 gen_mi_store(&b
, gen_mi_reg32(MI_PREDICATE_SRC1
), gen_mi_imm(draw_index
));
3220 if (draw_index
== 0) {
3221 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
3222 mip
.LoadOperation
= LOAD_LOADINV
;
3223 mip
.CombineOperation
= COMBINE_SET
;
3224 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3227 /* While draw_index < draw_count the predicate's result will be
3228 * (draw_index == draw_count) ^ TRUE = TRUE
3229 * When draw_index == draw_count the result is
3230 * (TRUE) ^ TRUE = FALSE
3231 * After this all results will be:
3232 * (FALSE) ^ FALSE = FALSE
3234 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
3235 mip
.LoadOperation
= LOAD_LOAD
;
3236 mip
.CombineOperation
= COMBINE_XOR
;
3237 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3242 #if GEN_GEN >= 8 || GEN_IS_HASWELL
3244 emit_draw_count_predicate_with_conditional_render(
3245 struct anv_cmd_buffer
*cmd_buffer
,
3246 uint32_t draw_index
)
3248 struct gen_mi_builder b
;
3249 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3251 struct gen_mi_value pred
= gen_mi_ult(&b
, gen_mi_imm(draw_index
),
3252 gen_mi_reg64(TMP_DRAW_COUNT_REG
));
3253 pred
= gen_mi_iand(&b
, pred
, gen_mi_reg64(ANV_PREDICATE_RESULT_REG
));
3256 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_RESULT
), pred
);
3258 /* MI_PREDICATE_RESULT is not whitelisted in i915 command parser
3259 * so we emit MI_PREDICATE to set it.
3262 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
), pred
);
3263 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC1
), gen_mi_imm(0));
3265 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
3266 mip
.LoadOperation
= LOAD_LOADINV
;
3267 mip
.CombineOperation
= COMBINE_SET
;
3268 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3274 void genX(CmdDrawIndirectCountKHR
)(
3275 VkCommandBuffer commandBuffer
,
3277 VkDeviceSize offset
,
3278 VkBuffer _countBuffer
,
3279 VkDeviceSize countBufferOffset
,
3280 uint32_t maxDrawCount
,
3283 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3284 ANV_FROM_HANDLE(anv_buffer
, buffer
, _buffer
);
3285 ANV_FROM_HANDLE(anv_buffer
, count_buffer
, _countBuffer
);
3286 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
3287 struct anv_pipeline
*pipeline
= cmd_state
->gfx
.base
.pipeline
;
3288 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
3290 if (anv_batch_has_error(&cmd_buffer
->batch
))
3293 genX(cmd_buffer_flush_state
)(cmd_buffer
);
3295 struct anv_address count_address
=
3296 anv_address_add(count_buffer
->address
, countBufferOffset
);
3298 prepare_for_draw_count_predicate(cmd_buffer
, count_address
,
3299 cmd_state
->conditional_render_enabled
);
3301 for (uint32_t i
= 0; i
< maxDrawCount
; i
++) {
3302 struct anv_address draw
= anv_address_add(buffer
->address
, offset
);
3304 #if GEN_GEN >= 8 || GEN_IS_HASWELL
3305 if (cmd_state
->conditional_render_enabled
) {
3306 emit_draw_count_predicate_with_conditional_render(cmd_buffer
, i
);
3308 emit_draw_count_predicate(cmd_buffer
, i
);
3311 emit_draw_count_predicate(cmd_buffer
, i
);
3314 if (vs_prog_data
->uses_firstvertex
||
3315 vs_prog_data
->uses_baseinstance
)
3316 emit_base_vertex_instance_bo(cmd_buffer
, anv_address_add(draw
, 8));
3317 if (vs_prog_data
->uses_drawid
)
3318 emit_draw_index(cmd_buffer
, i
);
3320 load_indirect_parameters(cmd_buffer
, draw
, false);
3322 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
3323 prim
.IndirectParameterEnable
= true;
3324 prim
.PredicateEnable
= true;
3325 prim
.VertexAccessType
= SEQUENTIAL
;
3326 prim
.PrimitiveTopologyType
= pipeline
->topology
;
3333 void genX(CmdDrawIndexedIndirectCountKHR
)(
3334 VkCommandBuffer commandBuffer
,
3336 VkDeviceSize offset
,
3337 VkBuffer _countBuffer
,
3338 VkDeviceSize countBufferOffset
,
3339 uint32_t maxDrawCount
,
3342 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3343 ANV_FROM_HANDLE(anv_buffer
, buffer
, _buffer
);
3344 ANV_FROM_HANDLE(anv_buffer
, count_buffer
, _countBuffer
);
3345 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
3346 struct anv_pipeline
*pipeline
= cmd_state
->gfx
.base
.pipeline
;
3347 const struct brw_vs_prog_data
*vs_prog_data
= get_vs_prog_data(pipeline
);
3349 if (anv_batch_has_error(&cmd_buffer
->batch
))
3352 genX(cmd_buffer_flush_state
)(cmd_buffer
);
3354 struct anv_address count_address
=
3355 anv_address_add(count_buffer
->address
, countBufferOffset
);
3357 prepare_for_draw_count_predicate(cmd_buffer
, count_address
,
3358 cmd_state
->conditional_render_enabled
);
3360 for (uint32_t i
= 0; i
< maxDrawCount
; i
++) {
3361 struct anv_address draw
= anv_address_add(buffer
->address
, offset
);
3363 #if GEN_GEN >= 8 || GEN_IS_HASWELL
3364 if (cmd_state
->conditional_render_enabled
) {
3365 emit_draw_count_predicate_with_conditional_render(cmd_buffer
, i
);
3367 emit_draw_count_predicate(cmd_buffer
, i
);
3370 emit_draw_count_predicate(cmd_buffer
, i
);
3373 /* TODO: We need to stomp base vertex to 0 somehow */
3374 if (vs_prog_data
->uses_firstvertex
||
3375 vs_prog_data
->uses_baseinstance
)
3376 emit_base_vertex_instance_bo(cmd_buffer
, anv_address_add(draw
, 12));
3377 if (vs_prog_data
->uses_drawid
)
3378 emit_draw_index(cmd_buffer
, i
);
3380 load_indirect_parameters(cmd_buffer
, draw
, true);
3382 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DPRIMITIVE
), prim
) {
3383 prim
.IndirectParameterEnable
= true;
3384 prim
.PredicateEnable
= true;
3385 prim
.VertexAccessType
= RANDOM
;
3386 prim
.PrimitiveTopologyType
= pipeline
->topology
;
3393 void genX(CmdBeginTransformFeedbackEXT
)(
3394 VkCommandBuffer commandBuffer
,
3395 uint32_t firstCounterBuffer
,
3396 uint32_t counterBufferCount
,
3397 const VkBuffer
* pCounterBuffers
,
3398 const VkDeviceSize
* pCounterBufferOffsets
)
3400 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3402 assert(firstCounterBuffer
< MAX_XFB_BUFFERS
);
3403 assert(counterBufferCount
<= MAX_XFB_BUFFERS
);
3404 assert(firstCounterBuffer
+ counterBufferCount
<= MAX_XFB_BUFFERS
);
3406 /* From the SKL PRM Vol. 2c, SO_WRITE_OFFSET:
3408 * "Ssoftware must ensure that no HW stream output operations can be in
3409 * process or otherwise pending at the point that the MI_LOAD/STORE
3410 * commands are processed. This will likely require a pipeline flush."
3412 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_CS_STALL_BIT
;
3413 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
3415 for (uint32_t idx
= 0; idx
< MAX_XFB_BUFFERS
; idx
++) {
3416 /* If we have a counter buffer, this is a resume so we need to load the
3417 * value into the streamout offset register. Otherwise, this is a begin
3418 * and we need to reset it to zero.
3420 if (pCounterBuffers
&&
3421 idx
>= firstCounterBuffer
&&
3422 idx
- firstCounterBuffer
< counterBufferCount
&&
3423 pCounterBuffers
[idx
- firstCounterBuffer
] != VK_NULL_HANDLE
) {
3424 uint32_t cb_idx
= idx
- firstCounterBuffer
;
3425 ANV_FROM_HANDLE(anv_buffer
, counter_buffer
, pCounterBuffers
[cb_idx
]);
3426 uint64_t offset
= pCounterBufferOffsets
?
3427 pCounterBufferOffsets
[cb_idx
] : 0;
3429 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_LOAD_REGISTER_MEM
), lrm
) {
3430 lrm
.RegisterAddress
= GENX(SO_WRITE_OFFSET0_num
) + idx
* 4;
3431 lrm
.MemoryAddress
= anv_address_add(counter_buffer
->address
,
3435 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_LOAD_REGISTER_IMM
), lri
) {
3436 lri
.RegisterOffset
= GENX(SO_WRITE_OFFSET0_num
) + idx
* 4;
3442 cmd_buffer
->state
.xfb_enabled
= true;
3443 cmd_buffer
->state
.gfx
.dirty
|= ANV_CMD_DIRTY_XFB_ENABLE
;
3446 void genX(CmdEndTransformFeedbackEXT
)(
3447 VkCommandBuffer commandBuffer
,
3448 uint32_t firstCounterBuffer
,
3449 uint32_t counterBufferCount
,
3450 const VkBuffer
* pCounterBuffers
,
3451 const VkDeviceSize
* pCounterBufferOffsets
)
3453 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3455 assert(firstCounterBuffer
< MAX_XFB_BUFFERS
);
3456 assert(counterBufferCount
<= MAX_XFB_BUFFERS
);
3457 assert(firstCounterBuffer
+ counterBufferCount
<= MAX_XFB_BUFFERS
);
3459 /* From the SKL PRM Vol. 2c, SO_WRITE_OFFSET:
3461 * "Ssoftware must ensure that no HW stream output operations can be in
3462 * process or otherwise pending at the point that the MI_LOAD/STORE
3463 * commands are processed. This will likely require a pipeline flush."
3465 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_CS_STALL_BIT
;
3466 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
3468 for (uint32_t cb_idx
= 0; cb_idx
< counterBufferCount
; cb_idx
++) {
3469 unsigned idx
= firstCounterBuffer
+ cb_idx
;
3471 /* If we have a counter buffer, this is a resume so we need to load the
3472 * value into the streamout offset register. Otherwise, this is a begin
3473 * and we need to reset it to zero.
3475 if (pCounterBuffers
&&
3476 cb_idx
< counterBufferCount
&&
3477 pCounterBuffers
[cb_idx
] != VK_NULL_HANDLE
) {
3478 ANV_FROM_HANDLE(anv_buffer
, counter_buffer
, pCounterBuffers
[cb_idx
]);
3479 uint64_t offset
= pCounterBufferOffsets
?
3480 pCounterBufferOffsets
[cb_idx
] : 0;
3482 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_STORE_REGISTER_MEM
), srm
) {
3483 srm
.MemoryAddress
= anv_address_add(counter_buffer
->address
,
3485 srm
.RegisterAddress
= GENX(SO_WRITE_OFFSET0_num
) + idx
* 4;
3490 cmd_buffer
->state
.xfb_enabled
= false;
3491 cmd_buffer
->state
.gfx
.dirty
|= ANV_CMD_DIRTY_XFB_ENABLE
;
3495 flush_compute_descriptor_set(struct anv_cmd_buffer
*cmd_buffer
)
3497 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.compute
.base
.pipeline
;
3498 struct anv_state surfaces
= { 0, }, samplers
= { 0, };
3501 result
= emit_binding_table(cmd_buffer
, MESA_SHADER_COMPUTE
, &surfaces
);
3502 if (result
!= VK_SUCCESS
) {
3503 assert(result
== VK_ERROR_OUT_OF_DEVICE_MEMORY
);
3505 result
= anv_cmd_buffer_new_binding_table_block(cmd_buffer
);
3506 if (result
!= VK_SUCCESS
)
3509 /* Re-emit state base addresses so we get the new surface state base
3510 * address before we start emitting binding tables etc.
3512 genX(cmd_buffer_emit_state_base_address
)(cmd_buffer
);
3514 result
= emit_binding_table(cmd_buffer
, MESA_SHADER_COMPUTE
, &surfaces
);
3515 if (result
!= VK_SUCCESS
) {
3516 anv_batch_set_error(&cmd_buffer
->batch
, result
);
3521 result
= emit_samplers(cmd_buffer
, MESA_SHADER_COMPUTE
, &samplers
);
3522 if (result
!= VK_SUCCESS
) {
3523 anv_batch_set_error(&cmd_buffer
->batch
, result
);
3527 uint32_t iface_desc_data_dw
[GENX(INTERFACE_DESCRIPTOR_DATA_length
)];
3528 struct GENX(INTERFACE_DESCRIPTOR_DATA
) desc
= {
3529 .BindingTablePointer
= surfaces
.offset
,
3530 .SamplerStatePointer
= samplers
.offset
,
3532 GENX(INTERFACE_DESCRIPTOR_DATA_pack
)(NULL
, iface_desc_data_dw
, &desc
);
3534 struct anv_state state
=
3535 anv_cmd_buffer_merge_dynamic(cmd_buffer
, iface_desc_data_dw
,
3536 pipeline
->interface_descriptor_data
,
3537 GENX(INTERFACE_DESCRIPTOR_DATA_length
),
3540 uint32_t size
= GENX(INTERFACE_DESCRIPTOR_DATA_length
) * sizeof(uint32_t);
3541 anv_batch_emit(&cmd_buffer
->batch
,
3542 GENX(MEDIA_INTERFACE_DESCRIPTOR_LOAD
), mid
) {
3543 mid
.InterfaceDescriptorTotalLength
= size
;
3544 mid
.InterfaceDescriptorDataStartAddress
= state
.offset
;
3551 genX(cmd_buffer_flush_compute_state
)(struct anv_cmd_buffer
*cmd_buffer
)
3553 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.compute
.base
.pipeline
;
3556 assert(pipeline
->active_stages
== VK_SHADER_STAGE_COMPUTE_BIT
);
3558 genX(cmd_buffer_config_l3
)(cmd_buffer
, pipeline
->urb
.l3_config
);
3560 genX(flush_pipeline_select_gpgpu
)(cmd_buffer
);
3563 genX(cmd_buffer_aux_map_state
)(cmd_buffer
);
3566 if (cmd_buffer
->state
.compute
.pipeline_dirty
) {
3567 /* From the Sky Lake PRM Vol 2a, MEDIA_VFE_STATE:
3569 * "A stalling PIPE_CONTROL is required before MEDIA_VFE_STATE unless
3570 * the only bits that are changed are scoreboard related: Scoreboard
3571 * Enable, Scoreboard Type, Scoreboard Mask, Scoreboard * Delta. For
3572 * these scoreboard related states, a MEDIA_STATE_FLUSH is
3575 cmd_buffer
->state
.pending_pipe_bits
|= ANV_PIPE_CS_STALL_BIT
;
3576 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
3578 anv_batch_emit_batch(&cmd_buffer
->batch
, &pipeline
->batch
);
3580 /* The workgroup size of the pipeline affects our push constant layout
3581 * so flag push constants as dirty if we change the pipeline.
3583 cmd_buffer
->state
.push_constants_dirty
|= VK_SHADER_STAGE_COMPUTE_BIT
;
3586 if ((cmd_buffer
->state
.descriptors_dirty
& VK_SHADER_STAGE_COMPUTE_BIT
) ||
3587 cmd_buffer
->state
.compute
.pipeline_dirty
) {
3588 /* FIXME: figure out descriptors for gen7 */
3589 result
= flush_compute_descriptor_set(cmd_buffer
);
3590 if (result
!= VK_SUCCESS
)
3593 cmd_buffer
->state
.descriptors_dirty
&= ~VK_SHADER_STAGE_COMPUTE_BIT
;
3596 if (cmd_buffer
->state
.push_constants_dirty
& VK_SHADER_STAGE_COMPUTE_BIT
) {
3597 struct anv_state push_state
=
3598 anv_cmd_buffer_cs_push_constants(cmd_buffer
);
3600 if (push_state
.alloc_size
) {
3601 anv_batch_emit(&cmd_buffer
->batch
, GENX(MEDIA_CURBE_LOAD
), curbe
) {
3602 curbe
.CURBETotalDataLength
= push_state
.alloc_size
;
3603 curbe
.CURBEDataStartAddress
= push_state
.offset
;
3607 cmd_buffer
->state
.push_constants_dirty
&= ~VK_SHADER_STAGE_COMPUTE_BIT
;
3610 cmd_buffer
->state
.compute
.pipeline_dirty
= false;
3612 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
3618 verify_cmd_parser(const struct anv_device
*device
,
3619 int required_version
,
3620 const char *function
)
3622 if (device
->instance
->physicalDevice
.cmd_parser_version
< required_version
) {
3623 return vk_errorf(device
->instance
, device
->instance
,
3624 VK_ERROR_FEATURE_NOT_PRESENT
,
3625 "cmd parser version %d is required for %s",
3626 required_version
, function
);
3635 anv_cmd_buffer_push_base_group_id(struct anv_cmd_buffer
*cmd_buffer
,
3636 uint32_t baseGroupX
,
3637 uint32_t baseGroupY
,
3638 uint32_t baseGroupZ
)
3640 if (anv_batch_has_error(&cmd_buffer
->batch
))
3643 struct anv_push_constants
*push
=
3644 &cmd_buffer
->state
.push_constants
[MESA_SHADER_COMPUTE
];
3645 if (push
->cs
.base_work_group_id
[0] != baseGroupX
||
3646 push
->cs
.base_work_group_id
[1] != baseGroupY
||
3647 push
->cs
.base_work_group_id
[2] != baseGroupZ
) {
3648 push
->cs
.base_work_group_id
[0] = baseGroupX
;
3649 push
->cs
.base_work_group_id
[1] = baseGroupY
;
3650 push
->cs
.base_work_group_id
[2] = baseGroupZ
;
3652 cmd_buffer
->state
.push_constants_dirty
|= VK_SHADER_STAGE_COMPUTE_BIT
;
3656 void genX(CmdDispatch
)(
3657 VkCommandBuffer commandBuffer
,
3662 genX(CmdDispatchBase
)(commandBuffer
, 0, 0, 0, x
, y
, z
);
3665 void genX(CmdDispatchBase
)(
3666 VkCommandBuffer commandBuffer
,
3667 uint32_t baseGroupX
,
3668 uint32_t baseGroupY
,
3669 uint32_t baseGroupZ
,
3670 uint32_t groupCountX
,
3671 uint32_t groupCountY
,
3672 uint32_t groupCountZ
)
3674 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3675 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.compute
.base
.pipeline
;
3676 const struct brw_cs_prog_data
*prog_data
= get_cs_prog_data(pipeline
);
3678 anv_cmd_buffer_push_base_group_id(cmd_buffer
, baseGroupX
,
3679 baseGroupY
, baseGroupZ
);
3681 if (anv_batch_has_error(&cmd_buffer
->batch
))
3684 if (prog_data
->uses_num_work_groups
) {
3685 struct anv_state state
=
3686 anv_cmd_buffer_alloc_dynamic_state(cmd_buffer
, 12, 4);
3687 uint32_t *sizes
= state
.map
;
3688 sizes
[0] = groupCountX
;
3689 sizes
[1] = groupCountY
;
3690 sizes
[2] = groupCountZ
;
3691 cmd_buffer
->state
.compute
.num_workgroups
= (struct anv_address
) {
3692 .bo
= cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
3693 .offset
= state
.offset
,
3697 genX(cmd_buffer_flush_compute_state
)(cmd_buffer
);
3699 if (cmd_buffer
->state
.conditional_render_enabled
)
3700 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
3702 anv_batch_emit(&cmd_buffer
->batch
, GENX(GPGPU_WALKER
), ggw
) {
3703 ggw
.PredicateEnable
= cmd_buffer
->state
.conditional_render_enabled
;
3704 ggw
.SIMDSize
= prog_data
->simd_size
/ 16;
3705 ggw
.ThreadDepthCounterMaximum
= 0;
3706 ggw
.ThreadHeightCounterMaximum
= 0;
3707 ggw
.ThreadWidthCounterMaximum
= prog_data
->threads
- 1;
3708 ggw
.ThreadGroupIDXDimension
= groupCountX
;
3709 ggw
.ThreadGroupIDYDimension
= groupCountY
;
3710 ggw
.ThreadGroupIDZDimension
= groupCountZ
;
3711 ggw
.RightExecutionMask
= pipeline
->cs_right_mask
;
3712 ggw
.BottomExecutionMask
= 0xffffffff;
3715 anv_batch_emit(&cmd_buffer
->batch
, GENX(MEDIA_STATE_FLUSH
), msf
);
3718 #define GPGPU_DISPATCHDIMX 0x2500
3719 #define GPGPU_DISPATCHDIMY 0x2504
3720 #define GPGPU_DISPATCHDIMZ 0x2508
3722 void genX(CmdDispatchIndirect
)(
3723 VkCommandBuffer commandBuffer
,
3725 VkDeviceSize offset
)
3727 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
3728 ANV_FROM_HANDLE(anv_buffer
, buffer
, _buffer
);
3729 struct anv_pipeline
*pipeline
= cmd_buffer
->state
.compute
.base
.pipeline
;
3730 const struct brw_cs_prog_data
*prog_data
= get_cs_prog_data(pipeline
);
3731 struct anv_address addr
= anv_address_add(buffer
->address
, offset
);
3732 struct anv_batch
*batch
= &cmd_buffer
->batch
;
3734 anv_cmd_buffer_push_base_group_id(cmd_buffer
, 0, 0, 0);
3737 /* Linux 4.4 added command parser version 5 which allows the GPGPU
3738 * indirect dispatch registers to be written.
3740 if (verify_cmd_parser(cmd_buffer
->device
, 5,
3741 "vkCmdDispatchIndirect") != VK_SUCCESS
)
3745 if (prog_data
->uses_num_work_groups
)
3746 cmd_buffer
->state
.compute
.num_workgroups
= addr
;
3748 genX(cmd_buffer_flush_compute_state
)(cmd_buffer
);
3750 struct gen_mi_builder b
;
3751 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
3753 struct gen_mi_value size_x
= gen_mi_mem32(anv_address_add(addr
, 0));
3754 struct gen_mi_value size_y
= gen_mi_mem32(anv_address_add(addr
, 4));
3755 struct gen_mi_value size_z
= gen_mi_mem32(anv_address_add(addr
, 8));
3757 gen_mi_store(&b
, gen_mi_reg32(GPGPU_DISPATCHDIMX
), size_x
);
3758 gen_mi_store(&b
, gen_mi_reg32(GPGPU_DISPATCHDIMY
), size_y
);
3759 gen_mi_store(&b
, gen_mi_reg32(GPGPU_DISPATCHDIMZ
), size_z
);
3762 /* predicate = (compute_dispatch_indirect_x_size == 0); */
3763 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
), size_x
);
3764 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC1
), gen_mi_imm(0));
3765 anv_batch_emit(batch
, GENX(MI_PREDICATE
), mip
) {
3766 mip
.LoadOperation
= LOAD_LOAD
;
3767 mip
.CombineOperation
= COMBINE_SET
;
3768 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3771 /* predicate |= (compute_dispatch_indirect_y_size == 0); */
3772 gen_mi_store(&b
, gen_mi_reg32(MI_PREDICATE_SRC0
), size_y
);
3773 anv_batch_emit(batch
, GENX(MI_PREDICATE
), mip
) {
3774 mip
.LoadOperation
= LOAD_LOAD
;
3775 mip
.CombineOperation
= COMBINE_OR
;
3776 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3779 /* predicate |= (compute_dispatch_indirect_z_size == 0); */
3780 gen_mi_store(&b
, gen_mi_reg32(MI_PREDICATE_SRC0
), size_z
);
3781 anv_batch_emit(batch
, GENX(MI_PREDICATE
), mip
) {
3782 mip
.LoadOperation
= LOAD_LOAD
;
3783 mip
.CombineOperation
= COMBINE_OR
;
3784 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3787 /* predicate = !predicate; */
3788 anv_batch_emit(batch
, GENX(MI_PREDICATE
), mip
) {
3789 mip
.LoadOperation
= LOAD_LOADINV
;
3790 mip
.CombineOperation
= COMBINE_OR
;
3791 mip
.CompareOperation
= COMPARE_FALSE
;
3795 if (cmd_buffer
->state
.conditional_render_enabled
) {
3796 /* predicate &= !(conditional_rendering_predicate == 0); */
3797 gen_mi_store(&b
, gen_mi_reg32(MI_PREDICATE_SRC0
),
3798 gen_mi_reg32(ANV_PREDICATE_RESULT_REG
));
3799 anv_batch_emit(batch
, GENX(MI_PREDICATE
), mip
) {
3800 mip
.LoadOperation
= LOAD_LOADINV
;
3801 mip
.CombineOperation
= COMBINE_AND
;
3802 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
3807 #else /* GEN_GEN > 7 */
3808 if (cmd_buffer
->state
.conditional_render_enabled
)
3809 genX(cmd_emit_conditional_render_predicate
)(cmd_buffer
);
3812 anv_batch_emit(batch
, GENX(GPGPU_WALKER
), ggw
) {
3813 ggw
.IndirectParameterEnable
= true;
3814 ggw
.PredicateEnable
= GEN_GEN
<= 7 ||
3815 cmd_buffer
->state
.conditional_render_enabled
;
3816 ggw
.SIMDSize
= prog_data
->simd_size
/ 16;
3817 ggw
.ThreadDepthCounterMaximum
= 0;
3818 ggw
.ThreadHeightCounterMaximum
= 0;
3819 ggw
.ThreadWidthCounterMaximum
= prog_data
->threads
- 1;
3820 ggw
.RightExecutionMask
= pipeline
->cs_right_mask
;
3821 ggw
.BottomExecutionMask
= 0xffffffff;
3824 anv_batch_emit(batch
, GENX(MEDIA_STATE_FLUSH
), msf
);
3828 genX(flush_pipeline_select
)(struct anv_cmd_buffer
*cmd_buffer
,
3831 UNUSED
const struct gen_device_info
*devinfo
= &cmd_buffer
->device
->info
;
3833 if (cmd_buffer
->state
.current_pipeline
== pipeline
)
3836 #if GEN_GEN >= 8 && GEN_GEN < 10
3837 /* From the Broadwell PRM, Volume 2a: Instructions, PIPELINE_SELECT:
3839 * Software must clear the COLOR_CALC_STATE Valid field in
3840 * 3DSTATE_CC_STATE_POINTERS command prior to send a PIPELINE_SELECT
3841 * with Pipeline Select set to GPGPU.
3843 * The internal hardware docs recommend the same workaround for Gen9
3846 if (pipeline
== GPGPU
)
3847 anv_batch_emit(&cmd_buffer
->batch
, GENX(3DSTATE_CC_STATE_POINTERS
), t
);
3851 if (pipeline
== _3D
) {
3852 /* There is a mid-object preemption workaround which requires you to
3853 * re-emit MEDIA_VFE_STATE after switching from GPGPU to 3D. However,
3854 * even without preemption, we have issues with geometry flickering when
3855 * GPGPU and 3D are back-to-back and this seems to fix it. We don't
3858 const uint32_t subslices
=
3859 MAX2(cmd_buffer
->device
->instance
->physicalDevice
.subslice_total
, 1);
3860 anv_batch_emit(&cmd_buffer
->batch
, GENX(MEDIA_VFE_STATE
), vfe
) {
3861 vfe
.MaximumNumberofThreads
=
3862 devinfo
->max_cs_threads
* subslices
- 1;
3863 vfe
.NumberofURBEntries
= 2;
3864 vfe
.URBEntryAllocationSize
= 2;
3869 /* From "BXML » GT » MI » vol1a GPU Overview » [Instruction]
3870 * PIPELINE_SELECT [DevBWR+]":
3874 * Software must ensure all the write caches are flushed through a
3875 * stalling PIPE_CONTROL command followed by another PIPE_CONTROL
3876 * command to invalidate read only caches prior to programming
3877 * MI_PIPELINE_SELECT command to change the Pipeline Select Mode.
3879 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
3880 pc
.RenderTargetCacheFlushEnable
= true;
3881 pc
.DepthCacheFlushEnable
= true;
3882 pc
.DCFlushEnable
= true;
3883 pc
.PostSyncOperation
= NoWrite
;
3884 pc
.CommandStreamerStallEnable
= true;
3886 pc
.TileCacheFlushEnable
= true;
3890 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
3891 pc
.TextureCacheInvalidationEnable
= true;
3892 pc
.ConstantCacheInvalidationEnable
= true;
3893 pc
.StateCacheInvalidationEnable
= true;
3894 pc
.InstructionCacheInvalidateEnable
= true;
3895 pc
.PostSyncOperation
= NoWrite
;
3897 pc
.TileCacheFlushEnable
= true;
3901 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPELINE_SELECT
), ps
) {
3905 ps
.PipelineSelection
= pipeline
;
3909 if (devinfo
->is_geminilake
) {
3912 * "This chicken bit works around a hardware issue with barrier logic
3913 * encountered when switching between GPGPU and 3D pipelines. To
3914 * workaround the issue, this mode bit should be set after a pipeline
3918 anv_pack_struct(&scec
, GENX(SLICE_COMMON_ECO_CHICKEN1
),
3920 pipeline
== GPGPU
? GLK_BARRIER_MODE_GPGPU
3921 : GLK_BARRIER_MODE_3D_HULL
,
3922 .GLKBarrierModeMask
= 1);
3923 emit_lri(&cmd_buffer
->batch
, GENX(SLICE_COMMON_ECO_CHICKEN1_num
), scec
);
3927 cmd_buffer
->state
.current_pipeline
= pipeline
;
3931 genX(flush_pipeline_select_3d
)(struct anv_cmd_buffer
*cmd_buffer
)
3933 genX(flush_pipeline_select
)(cmd_buffer
, _3D
);
3937 genX(flush_pipeline_select_gpgpu
)(struct anv_cmd_buffer
*cmd_buffer
)
3939 genX(flush_pipeline_select
)(cmd_buffer
, GPGPU
);
3943 genX(cmd_buffer_emit_gen7_depth_flush
)(struct anv_cmd_buffer
*cmd_buffer
)
3948 /* From the Haswell PRM, documentation for 3DSTATE_DEPTH_BUFFER:
3950 * "Restriction: Prior to changing Depth/Stencil Buffer state (i.e., any
3951 * combination of 3DSTATE_DEPTH_BUFFER, 3DSTATE_CLEAR_PARAMS,
3952 * 3DSTATE_STENCIL_BUFFER, 3DSTATE_HIER_DEPTH_BUFFER) SW must first
3953 * issue a pipelined depth stall (PIPE_CONTROL with Depth Stall bit
3954 * set), followed by a pipelined depth cache flush (PIPE_CONTROL with
3955 * Depth Flush Bit set, followed by another pipelined depth stall
3956 * (PIPE_CONTROL with Depth Stall Bit set), unless SW can otherwise
3957 * guarantee that the pipeline from WM onwards is already flushed (e.g.,
3958 * via a preceding MI_FLUSH)."
3960 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
) {
3961 pipe
.DepthStallEnable
= true;
3963 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
) {
3964 pipe
.DepthCacheFlushEnable
= true;
3966 pipe
.TileCacheFlushEnable
= true;
3969 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pipe
) {
3970 pipe
.DepthStallEnable
= true;
3975 * Update the pixel hashing modes that determine the balancing of PS threads
3976 * across subslices and slices.
3978 * \param width Width bound of the rendering area (already scaled down if \p
3979 * scale is greater than 1).
3980 * \param height Height bound of the rendering area (already scaled down if \p
3981 * scale is greater than 1).
3982 * \param scale The number of framebuffer samples that could potentially be
3983 * affected by an individual channel of the PS thread. This is
3984 * typically one for single-sampled rendering, but for operations
3985 * like CCS resolves and fast clears a single PS invocation may
3986 * update a huge number of pixels, in which case a finer
3987 * balancing is desirable in order to maximally utilize the
3988 * bandwidth available. UINT_MAX can be used as shorthand for
3989 * "finest hashing mode available".
3992 genX(cmd_buffer_emit_hashing_mode
)(struct anv_cmd_buffer
*cmd_buffer
,
3993 unsigned width
, unsigned height
,
3997 const struct gen_device_info
*devinfo
= &cmd_buffer
->device
->info
;
3998 const unsigned slice_hashing
[] = {
3999 /* Because all Gen9 platforms with more than one slice require
4000 * three-way subslice hashing, a single "normal" 16x16 slice hashing
4001 * block is guaranteed to suffer from substantial imbalance, with one
4002 * subslice receiving twice as much work as the other two in the
4005 * The performance impact of that would be particularly severe when
4006 * three-way hashing is also in use for slice balancing (which is the
4007 * case for all Gen9 GT4 platforms), because one of the slices
4008 * receives one every three 16x16 blocks in either direction, which
4009 * is roughly the periodicity of the underlying subslice imbalance
4010 * pattern ("roughly" because in reality the hardware's
4011 * implementation of three-way hashing doesn't do exact modulo 3
4012 * arithmetic, which somewhat decreases the magnitude of this effect
4013 * in practice). This leads to a systematic subslice imbalance
4014 * within that slice regardless of the size of the primitive. The
4015 * 32x32 hashing mode guarantees that the subslice imbalance within a
4016 * single slice hashing block is minimal, largely eliminating this
4020 /* Finest slice hashing mode available. */
4023 const unsigned subslice_hashing
[] = {
4024 /* 16x16 would provide a slight cache locality benefit especially
4025 * visible in the sampler L1 cache efficiency of low-bandwidth
4026 * non-LLC platforms, but it comes at the cost of greater subslice
4027 * imbalance for primitives of dimensions approximately intermediate
4028 * between 16x4 and 16x16.
4031 /* Finest subslice hashing mode available. */
4034 /* Dimensions of the smallest hashing block of a given hashing mode. If
4035 * the rendering area is smaller than this there can't possibly be any
4036 * benefit from switching to this mode, so we optimize out the
4039 const unsigned min_size
[][2] = {
4043 const unsigned idx
= scale
> 1;
4045 if (cmd_buffer
->state
.current_hash_scale
!= scale
&&
4046 (width
> min_size
[idx
][0] || height
> min_size
[idx
][1])) {
4049 anv_pack_struct(>_mode
, GENX(GT_MODE
),
4050 .SliceHashing
= (devinfo
->num_slices
> 1 ? slice_hashing
[idx
] : 0),
4051 .SliceHashingMask
= (devinfo
->num_slices
> 1 ? -1 : 0),
4052 .SubsliceHashing
= subslice_hashing
[idx
],
4053 .SubsliceHashingMask
= -1);
4055 cmd_buffer
->state
.pending_pipe_bits
|=
4056 ANV_PIPE_CS_STALL_BIT
| ANV_PIPE_STALL_AT_SCOREBOARD_BIT
;
4057 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
4059 emit_lri(&cmd_buffer
->batch
, GENX(GT_MODE_num
), gt_mode
);
4061 cmd_buffer
->state
.current_hash_scale
= scale
;
4067 cmd_buffer_emit_depth_stencil(struct anv_cmd_buffer
*cmd_buffer
)
4069 struct anv_device
*device
= cmd_buffer
->device
;
4070 const struct anv_image_view
*iview
=
4071 anv_cmd_buffer_get_depth_stencil_view(cmd_buffer
);
4072 const struct anv_image
*image
= iview
? iview
->image
: NULL
;
4074 /* FIXME: Width and Height are wrong */
4076 genX(cmd_buffer_emit_gen7_depth_flush
)(cmd_buffer
);
4078 uint32_t *dw
= anv_batch_emit_dwords(&cmd_buffer
->batch
,
4079 device
->isl_dev
.ds
.size
/ 4);
4083 struct isl_depth_stencil_hiz_emit_info info
= { };
4086 info
.view
= &iview
->planes
[0].isl
;
4088 if (image
&& (image
->aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
)) {
4089 uint32_t depth_plane
=
4090 anv_image_aspect_to_plane(image
->aspects
, VK_IMAGE_ASPECT_DEPTH_BIT
);
4091 const struct anv_surface
*surface
= &image
->planes
[depth_plane
].surface
;
4093 info
.depth_surf
= &surface
->isl
;
4095 info
.depth_address
=
4096 anv_batch_emit_reloc(&cmd_buffer
->batch
,
4097 dw
+ device
->isl_dev
.ds
.depth_offset
/ 4,
4098 image
->planes
[depth_plane
].address
.bo
,
4099 image
->planes
[depth_plane
].address
.offset
+
4102 anv_mocs_for_bo(device
, image
->planes
[depth_plane
].address
.bo
);
4105 cmd_buffer
->state
.subpass
->depth_stencil_attachment
->attachment
;
4106 info
.hiz_usage
= cmd_buffer
->state
.attachments
[ds
].aux_usage
;
4107 if (info
.hiz_usage
== ISL_AUX_USAGE_HIZ
) {
4108 info
.hiz_surf
= &image
->planes
[depth_plane
].aux_surface
.isl
;
4111 anv_batch_emit_reloc(&cmd_buffer
->batch
,
4112 dw
+ device
->isl_dev
.ds
.hiz_offset
/ 4,
4113 image
->planes
[depth_plane
].address
.bo
,
4114 image
->planes
[depth_plane
].address
.offset
+
4115 image
->planes
[depth_plane
].aux_surface
.offset
);
4117 info
.depth_clear_value
= ANV_HZ_FC_VAL
;
4121 if (image
&& (image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
)) {
4122 uint32_t stencil_plane
=
4123 anv_image_aspect_to_plane(image
->aspects
, VK_IMAGE_ASPECT_STENCIL_BIT
);
4124 const struct anv_surface
*surface
= &image
->planes
[stencil_plane
].surface
;
4126 info
.stencil_surf
= &surface
->isl
;
4128 info
.stencil_address
=
4129 anv_batch_emit_reloc(&cmd_buffer
->batch
,
4130 dw
+ device
->isl_dev
.ds
.stencil_offset
/ 4,
4131 image
->planes
[stencil_plane
].address
.bo
,
4132 image
->planes
[stencil_plane
].address
.offset
+
4135 anv_mocs_for_bo(device
, image
->planes
[stencil_plane
].address
.bo
);
4138 isl_emit_depth_stencil_hiz_s(&device
->isl_dev
, dw
, &info
);
4140 if (GEN_GEN
>= 12) {
4141 /* GEN:BUG:1408224581
4143 * Workaround: Gen12LP Astep only An additional pipe control with
4144 * post-sync = store dword operation would be required.( w/a is to
4145 * have an additional pipe control after the stencil state whenever
4146 * the surface state bits of this state is changing).
4148 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
4149 pc
.PostSyncOperation
= WriteImmediateData
;
4151 (struct anv_address
) { cmd_buffer
->device
->workaround_bo
, 0 };
4154 cmd_buffer
->state
.hiz_enabled
= info
.hiz_usage
== ISL_AUX_USAGE_HIZ
;
4158 * This ANDs the view mask of the current subpass with the pending clear
4159 * views in the attachment to get the mask of views active in the subpass
4160 * that still need to be cleared.
4162 static inline uint32_t
4163 get_multiview_subpass_clear_mask(const struct anv_cmd_state
*cmd_state
,
4164 const struct anv_attachment_state
*att_state
)
4166 return cmd_state
->subpass
->view_mask
& att_state
->pending_clear_views
;
4170 do_first_layer_clear(const struct anv_cmd_state
*cmd_state
,
4171 const struct anv_attachment_state
*att_state
)
4173 if (!cmd_state
->subpass
->view_mask
)
4176 uint32_t pending_clear_mask
=
4177 get_multiview_subpass_clear_mask(cmd_state
, att_state
);
4179 return pending_clear_mask
& 1;
4183 current_subpass_is_last_for_attachment(const struct anv_cmd_state
*cmd_state
,
4186 const uint32_t last_subpass_idx
=
4187 cmd_state
->pass
->attachments
[att_idx
].last_subpass_idx
;
4188 const struct anv_subpass
*last_subpass
=
4189 &cmd_state
->pass
->subpasses
[last_subpass_idx
];
4190 return last_subpass
== cmd_state
->subpass
;
4194 cmd_buffer_begin_subpass(struct anv_cmd_buffer
*cmd_buffer
,
4195 uint32_t subpass_id
)
4197 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
4198 struct anv_subpass
*subpass
= &cmd_state
->pass
->subpasses
[subpass_id
];
4199 cmd_state
->subpass
= subpass
;
4201 cmd_buffer
->state
.gfx
.dirty
|= ANV_CMD_DIRTY_RENDER_TARGETS
;
4203 /* Our implementation of VK_KHR_multiview uses instancing to draw the
4204 * different views. If the client asks for instancing, we need to use the
4205 * Instance Data Step Rate to ensure that we repeat the client's
4206 * per-instance data once for each view. Since this bit is in
4207 * VERTEX_BUFFER_STATE on gen7, we need to dirty vertex buffers at the top
4211 cmd_buffer
->state
.gfx
.vb_dirty
|= ~0;
4213 /* It is possible to start a render pass with an old pipeline. Because the
4214 * render pass and subpass index are both baked into the pipeline, this is
4215 * highly unlikely. In order to do so, it requires that you have a render
4216 * pass with a single subpass and that you use that render pass twice
4217 * back-to-back and use the same pipeline at the start of the second render
4218 * pass as at the end of the first. In order to avoid unpredictable issues
4219 * with this edge case, we just dirty the pipeline at the start of every
4222 cmd_buffer
->state
.gfx
.dirty
|= ANV_CMD_DIRTY_PIPELINE
;
4224 /* Accumulate any subpass flushes that need to happen before the subpass */
4225 cmd_buffer
->state
.pending_pipe_bits
|=
4226 cmd_buffer
->state
.pass
->subpass_flushes
[subpass_id
];
4228 VkRect2D render_area
= cmd_buffer
->state
.render_area
;
4229 struct anv_framebuffer
*fb
= cmd_buffer
->state
.framebuffer
;
4231 bool is_multiview
= subpass
->view_mask
!= 0;
4233 for (uint32_t i
= 0; i
< subpass
->attachment_count
; ++i
) {
4234 const uint32_t a
= subpass
->attachments
[i
].attachment
;
4235 if (a
== VK_ATTACHMENT_UNUSED
)
4238 assert(a
< cmd_state
->pass
->attachment_count
);
4239 struct anv_attachment_state
*att_state
= &cmd_state
->attachments
[a
];
4241 struct anv_image_view
*iview
= cmd_state
->attachments
[a
].image_view
;
4242 const struct anv_image
*image
= iview
->image
;
4244 /* A resolve is necessary before use as an input attachment if the clear
4245 * color or auxiliary buffer usage isn't supported by the sampler.
4247 const bool input_needs_resolve
=
4248 (att_state
->fast_clear
&& !att_state
->clear_color_is_zero_one
) ||
4249 att_state
->input_aux_usage
!= att_state
->aux_usage
;
4251 VkImageLayout target_layout
, target_stencil_layout
;
4252 if (iview
->aspect_mask
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
&&
4253 !input_needs_resolve
) {
4254 /* Layout transitions before the final only help to enable sampling
4255 * as an input attachment. If the input attachment supports sampling
4256 * using the auxiliary surface, we can skip such transitions by
4257 * making the target layout one that is CCS-aware.
4259 target_layout
= VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
;
4261 target_layout
= subpass
->attachments
[i
].layout
;
4262 target_stencil_layout
= subpass
->attachments
[i
].stencil_layout
;
4265 uint32_t base_layer
, layer_count
;
4266 if (image
->type
== VK_IMAGE_TYPE_3D
) {
4268 layer_count
= anv_minify(iview
->image
->extent
.depth
,
4269 iview
->planes
[0].isl
.base_level
);
4271 base_layer
= iview
->planes
[0].isl
.base_array_layer
;
4272 layer_count
= fb
->layers
;
4275 if (image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) {
4276 assert(image
->aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
4277 transition_color_buffer(cmd_buffer
, image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4278 iview
->planes
[0].isl
.base_level
, 1,
4279 base_layer
, layer_count
,
4280 att_state
->current_layout
, target_layout
);
4283 if (image
->aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
4284 transition_depth_buffer(cmd_buffer
, image
,
4285 att_state
->current_layout
, target_layout
);
4286 att_state
->aux_usage
=
4287 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, image
,
4288 VK_IMAGE_ASPECT_DEPTH_BIT
, target_layout
);
4291 if (image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
4292 transition_stencil_buffer(cmd_buffer
, image
,
4293 iview
->planes
[0].isl
.base_level
, 1,
4294 base_layer
, layer_count
,
4295 att_state
->current_stencil_layout
,
4296 target_stencil_layout
);
4298 att_state
->current_layout
= target_layout
;
4299 att_state
->current_stencil_layout
= target_stencil_layout
;
4301 if (att_state
->pending_clear_aspects
& VK_IMAGE_ASPECT_COLOR_BIT
) {
4302 assert(att_state
->pending_clear_aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
4304 /* Multi-planar images are not supported as attachments */
4305 assert(image
->aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
4306 assert(image
->n_planes
== 1);
4308 uint32_t base_clear_layer
= iview
->planes
[0].isl
.base_array_layer
;
4309 uint32_t clear_layer_count
= fb
->layers
;
4311 if (att_state
->fast_clear
&&
4312 do_first_layer_clear(cmd_state
, att_state
)) {
4313 /* We only support fast-clears on the first layer */
4314 assert(iview
->planes
[0].isl
.base_level
== 0);
4315 assert(iview
->planes
[0].isl
.base_array_layer
== 0);
4317 union isl_color_value clear_color
= {};
4318 anv_clear_color_from_att_state(&clear_color
, att_state
, iview
);
4319 if (iview
->image
->samples
== 1) {
4320 anv_image_ccs_op(cmd_buffer
, image
,
4321 iview
->planes
[0].isl
.format
,
4322 VK_IMAGE_ASPECT_COLOR_BIT
,
4323 0, 0, 1, ISL_AUX_OP_FAST_CLEAR
,
4327 anv_image_mcs_op(cmd_buffer
, image
,
4328 iview
->planes
[0].isl
.format
,
4329 VK_IMAGE_ASPECT_COLOR_BIT
,
4330 0, 1, ISL_AUX_OP_FAST_CLEAR
,
4335 clear_layer_count
--;
4337 att_state
->pending_clear_views
&= ~1;
4339 if (att_state
->clear_color_is_zero
) {
4340 /* This image has the auxiliary buffer enabled. We can mark the
4341 * subresource as not needing a resolve because the clear color
4342 * will match what's in every RENDER_SURFACE_STATE object when
4343 * it's being used for sampling.
4345 set_image_fast_clear_state(cmd_buffer
, iview
->image
,
4346 VK_IMAGE_ASPECT_COLOR_BIT
,
4347 ANV_FAST_CLEAR_DEFAULT_VALUE
);
4349 set_image_fast_clear_state(cmd_buffer
, iview
->image
,
4350 VK_IMAGE_ASPECT_COLOR_BIT
,
4351 ANV_FAST_CLEAR_ANY
);
4355 /* From the VkFramebufferCreateInfo spec:
4357 * "If the render pass uses multiview, then layers must be one and each
4358 * attachment requires a number of layers that is greater than the
4359 * maximum bit index set in the view mask in the subpasses in which it
4362 * So if multiview is active we ignore the number of layers in the
4363 * framebuffer and instead we honor the view mask from the subpass.
4366 assert(image
->n_planes
== 1);
4367 uint32_t pending_clear_mask
=
4368 get_multiview_subpass_clear_mask(cmd_state
, att_state
);
4371 for_each_bit(layer_idx
, pending_clear_mask
) {
4373 iview
->planes
[0].isl
.base_array_layer
+ layer_idx
;
4375 anv_image_clear_color(cmd_buffer
, image
,
4376 VK_IMAGE_ASPECT_COLOR_BIT
,
4377 att_state
->aux_usage
,
4378 iview
->planes
[0].isl
.format
,
4379 iview
->planes
[0].isl
.swizzle
,
4380 iview
->planes
[0].isl
.base_level
,
4383 vk_to_isl_color(att_state
->clear_value
.color
));
4386 att_state
->pending_clear_views
&= ~pending_clear_mask
;
4387 } else if (clear_layer_count
> 0) {
4388 assert(image
->n_planes
== 1);
4389 anv_image_clear_color(cmd_buffer
, image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4390 att_state
->aux_usage
,
4391 iview
->planes
[0].isl
.format
,
4392 iview
->planes
[0].isl
.swizzle
,
4393 iview
->planes
[0].isl
.base_level
,
4394 base_clear_layer
, clear_layer_count
,
4396 vk_to_isl_color(att_state
->clear_value
.color
));
4398 } else if (att_state
->pending_clear_aspects
& (VK_IMAGE_ASPECT_DEPTH_BIT
|
4399 VK_IMAGE_ASPECT_STENCIL_BIT
)) {
4400 if (att_state
->fast_clear
&& !is_multiview
) {
4401 /* We currently only support HiZ for single-layer images */
4402 if (att_state
->pending_clear_aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
4403 assert(iview
->image
->planes
[0].aux_usage
== ISL_AUX_USAGE_HIZ
);
4404 assert(iview
->planes
[0].isl
.base_level
== 0);
4405 assert(iview
->planes
[0].isl
.base_array_layer
== 0);
4406 assert(fb
->layers
== 1);
4409 anv_image_hiz_clear(cmd_buffer
, image
,
4410 att_state
->pending_clear_aspects
,
4411 iview
->planes
[0].isl
.base_level
,
4412 iview
->planes
[0].isl
.base_array_layer
,
4413 fb
->layers
, render_area
,
4414 att_state
->clear_value
.depthStencil
.stencil
);
4415 } else if (is_multiview
) {
4416 uint32_t pending_clear_mask
=
4417 get_multiview_subpass_clear_mask(cmd_state
, att_state
);
4420 for_each_bit(layer_idx
, pending_clear_mask
) {
4422 iview
->planes
[0].isl
.base_array_layer
+ layer_idx
;
4424 anv_image_clear_depth_stencil(cmd_buffer
, image
,
4425 att_state
->pending_clear_aspects
,
4426 att_state
->aux_usage
,
4427 iview
->planes
[0].isl
.base_level
,
4430 att_state
->clear_value
.depthStencil
.depth
,
4431 att_state
->clear_value
.depthStencil
.stencil
);
4434 att_state
->pending_clear_views
&= ~pending_clear_mask
;
4436 anv_image_clear_depth_stencil(cmd_buffer
, image
,
4437 att_state
->pending_clear_aspects
,
4438 att_state
->aux_usage
,
4439 iview
->planes
[0].isl
.base_level
,
4440 iview
->planes
[0].isl
.base_array_layer
,
4441 fb
->layers
, render_area
,
4442 att_state
->clear_value
.depthStencil
.depth
,
4443 att_state
->clear_value
.depthStencil
.stencil
);
4446 assert(att_state
->pending_clear_aspects
== 0);
4450 (att_state
->pending_load_aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) &&
4451 image
->planes
[0].aux_surface
.isl
.size_B
> 0 &&
4452 iview
->planes
[0].isl
.base_level
== 0 &&
4453 iview
->planes
[0].isl
.base_array_layer
== 0) {
4454 if (att_state
->aux_usage
!= ISL_AUX_USAGE_NONE
) {
4455 genX(copy_fast_clear_dwords
)(cmd_buffer
, att_state
->color
.state
,
4456 image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4457 false /* copy to ss */);
4460 if (need_input_attachment_state(&cmd_state
->pass
->attachments
[a
]) &&
4461 att_state
->input_aux_usage
!= ISL_AUX_USAGE_NONE
) {
4462 genX(copy_fast_clear_dwords
)(cmd_buffer
, att_state
->input
.state
,
4463 image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4464 false /* copy to ss */);
4468 if (subpass
->attachments
[i
].usage
==
4469 VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT
) {
4470 /* We assume that if we're starting a subpass, we're going to do some
4471 * rendering so we may end up with compressed data.
4473 genX(cmd_buffer_mark_image_written
)(cmd_buffer
, iview
->image
,
4474 VK_IMAGE_ASPECT_COLOR_BIT
,
4475 att_state
->aux_usage
,
4476 iview
->planes
[0].isl
.base_level
,
4477 iview
->planes
[0].isl
.base_array_layer
,
4479 } else if (subpass
->attachments
[i
].usage
==
4480 VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT
) {
4481 /* We may be writing depth or stencil so we need to mark the surface.
4482 * Unfortunately, there's no way to know at this point whether the
4483 * depth or stencil tests used will actually write to the surface.
4485 * Even though stencil may be plane 1, it always shares a base_level
4488 const struct isl_view
*ds_view
= &iview
->planes
[0].isl
;
4489 if (iview
->aspect_mask
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
4490 genX(cmd_buffer_mark_image_written
)(cmd_buffer
, image
,
4491 VK_IMAGE_ASPECT_DEPTH_BIT
,
4492 att_state
->aux_usage
,
4493 ds_view
->base_level
,
4494 ds_view
->base_array_layer
,
4497 if (iview
->aspect_mask
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
4498 /* Even though stencil may be plane 1, it always shares a
4499 * base_level with depth.
4501 genX(cmd_buffer_mark_image_written
)(cmd_buffer
, image
,
4502 VK_IMAGE_ASPECT_STENCIL_BIT
,
4504 ds_view
->base_level
,
4505 ds_view
->base_array_layer
,
4510 /* If multiview is enabled, then we are only done clearing when we no
4511 * longer have pending layers to clear, or when we have processed the
4512 * last subpass that uses this attachment.
4514 if (!is_multiview
||
4515 att_state
->pending_clear_views
== 0 ||
4516 current_subpass_is_last_for_attachment(cmd_state
, a
)) {
4517 att_state
->pending_clear_aspects
= 0;
4520 att_state
->pending_load_aspects
= 0;
4523 cmd_buffer_emit_depth_stencil(cmd_buffer
);
4526 /* The PIPE_CONTROL command description says:
4528 * "Whenever a Binding Table Index (BTI) used by a Render Taget Message
4529 * points to a different RENDER_SURFACE_STATE, SW must issue a Render
4530 * Target Cache Flush by enabling this bit. When render target flush
4531 * is set due to new association of BTI, PS Scoreboard Stall bit must
4532 * be set in this packet."
4534 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
4535 pc
.RenderTargetCacheFlushEnable
= true;
4536 pc
.StallAtPixelScoreboard
= true;
4538 pc
.TileCacheFlushEnable
= true;
4544 static enum blorp_filter
4545 vk_to_blorp_resolve_mode(VkResolveModeFlagBitsKHR vk_mode
)
4548 case VK_RESOLVE_MODE_SAMPLE_ZERO_BIT_KHR
:
4549 return BLORP_FILTER_SAMPLE_0
;
4550 case VK_RESOLVE_MODE_AVERAGE_BIT_KHR
:
4551 return BLORP_FILTER_AVERAGE
;
4552 case VK_RESOLVE_MODE_MIN_BIT_KHR
:
4553 return BLORP_FILTER_MIN_SAMPLE
;
4554 case VK_RESOLVE_MODE_MAX_BIT_KHR
:
4555 return BLORP_FILTER_MAX_SAMPLE
;
4557 return BLORP_FILTER_NONE
;
4562 cmd_buffer_end_subpass(struct anv_cmd_buffer
*cmd_buffer
)
4564 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
4565 struct anv_subpass
*subpass
= cmd_state
->subpass
;
4566 uint32_t subpass_id
= anv_get_subpass_id(&cmd_buffer
->state
);
4567 struct anv_framebuffer
*fb
= cmd_buffer
->state
.framebuffer
;
4569 if (subpass
->has_color_resolve
) {
4570 /* We are about to do some MSAA resolves. We need to flush so that the
4571 * result of writes to the MSAA color attachments show up in the sampler
4572 * when we blit to the single-sampled resolve target.
4574 cmd_buffer
->state
.pending_pipe_bits
|=
4575 ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT
|
4576 ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT
;
4578 for (uint32_t i
= 0; i
< subpass
->color_count
; ++i
) {
4579 uint32_t src_att
= subpass
->color_attachments
[i
].attachment
;
4580 uint32_t dst_att
= subpass
->resolve_attachments
[i
].attachment
;
4582 if (dst_att
== VK_ATTACHMENT_UNUSED
)
4585 assert(src_att
< cmd_buffer
->state
.pass
->attachment_count
);
4586 assert(dst_att
< cmd_buffer
->state
.pass
->attachment_count
);
4588 if (cmd_buffer
->state
.attachments
[dst_att
].pending_clear_aspects
) {
4589 /* From the Vulkan 1.0 spec:
4591 * If the first use of an attachment in a render pass is as a
4592 * resolve attachment, then the loadOp is effectively ignored
4593 * as the resolve is guaranteed to overwrite all pixels in the
4596 cmd_buffer
->state
.attachments
[dst_att
].pending_clear_aspects
= 0;
4599 struct anv_image_view
*src_iview
= cmd_state
->attachments
[src_att
].image_view
;
4600 struct anv_image_view
*dst_iview
= cmd_state
->attachments
[dst_att
].image_view
;
4602 const VkRect2D render_area
= cmd_buffer
->state
.render_area
;
4604 enum isl_aux_usage src_aux_usage
=
4605 cmd_buffer
->state
.attachments
[src_att
].aux_usage
;
4606 enum isl_aux_usage dst_aux_usage
=
4607 cmd_buffer
->state
.attachments
[dst_att
].aux_usage
;
4609 assert(src_iview
->aspect_mask
== VK_IMAGE_ASPECT_COLOR_BIT
&&
4610 dst_iview
->aspect_mask
== VK_IMAGE_ASPECT_COLOR_BIT
);
4612 anv_image_msaa_resolve(cmd_buffer
,
4613 src_iview
->image
, src_aux_usage
,
4614 src_iview
->planes
[0].isl
.base_level
,
4615 src_iview
->planes
[0].isl
.base_array_layer
,
4616 dst_iview
->image
, dst_aux_usage
,
4617 dst_iview
->planes
[0].isl
.base_level
,
4618 dst_iview
->planes
[0].isl
.base_array_layer
,
4619 VK_IMAGE_ASPECT_COLOR_BIT
,
4620 render_area
.offset
.x
, render_area
.offset
.y
,
4621 render_area
.offset
.x
, render_area
.offset
.y
,
4622 render_area
.extent
.width
,
4623 render_area
.extent
.height
,
4624 fb
->layers
, BLORP_FILTER_NONE
);
4628 if (subpass
->ds_resolve_attachment
) {
4629 /* We are about to do some MSAA resolves. We need to flush so that the
4630 * result of writes to the MSAA depth attachments show up in the sampler
4631 * when we blit to the single-sampled resolve target.
4633 cmd_buffer
->state
.pending_pipe_bits
|=
4634 ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT
|
4635 ANV_PIPE_DEPTH_CACHE_FLUSH_BIT
;
4637 uint32_t src_att
= subpass
->depth_stencil_attachment
->attachment
;
4638 uint32_t dst_att
= subpass
->ds_resolve_attachment
->attachment
;
4640 assert(src_att
< cmd_buffer
->state
.pass
->attachment_count
);
4641 assert(dst_att
< cmd_buffer
->state
.pass
->attachment_count
);
4643 if (cmd_buffer
->state
.attachments
[dst_att
].pending_clear_aspects
) {
4644 /* From the Vulkan 1.0 spec:
4646 * If the first use of an attachment in a render pass is as a
4647 * resolve attachment, then the loadOp is effectively ignored
4648 * as the resolve is guaranteed to overwrite all pixels in the
4651 cmd_buffer
->state
.attachments
[dst_att
].pending_clear_aspects
= 0;
4654 struct anv_image_view
*src_iview
= cmd_state
->attachments
[src_att
].image_view
;
4655 struct anv_image_view
*dst_iview
= cmd_state
->attachments
[dst_att
].image_view
;
4657 const VkRect2D render_area
= cmd_buffer
->state
.render_area
;
4659 struct anv_attachment_state
*src_state
=
4660 &cmd_state
->attachments
[src_att
];
4661 struct anv_attachment_state
*dst_state
=
4662 &cmd_state
->attachments
[dst_att
];
4664 if ((src_iview
->image
->aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
) &&
4665 subpass
->depth_resolve_mode
!= VK_RESOLVE_MODE_NONE_KHR
) {
4667 /* MSAA resolves sample from the source attachment. Transition the
4668 * depth attachment first to get rid of any HiZ that we may not be
4671 transition_depth_buffer(cmd_buffer
, src_iview
->image
,
4672 src_state
->current_layout
,
4673 VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
);
4674 src_state
->aux_usage
=
4675 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, src_iview
->image
,
4676 VK_IMAGE_ASPECT_DEPTH_BIT
,
4677 VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
);
4678 src_state
->current_layout
= VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
;
4680 /* MSAA resolves write to the resolve attachment as if it were any
4681 * other transfer op. Transition the resolve attachment accordingly.
4683 VkImageLayout dst_initial_layout
= dst_state
->current_layout
;
4685 /* If our render area is the entire size of the image, we're going to
4686 * blow it all away so we can claim the initial layout is UNDEFINED
4687 * and we'll get a HiZ ambiguate instead of a resolve.
4689 if (dst_iview
->image
->type
!= VK_IMAGE_TYPE_3D
&&
4690 render_area
.offset
.x
== 0 && render_area
.offset
.y
== 0 &&
4691 render_area
.extent
.width
== dst_iview
->extent
.width
&&
4692 render_area
.extent
.height
== dst_iview
->extent
.height
)
4693 dst_initial_layout
= VK_IMAGE_LAYOUT_UNDEFINED
;
4695 transition_depth_buffer(cmd_buffer
, dst_iview
->image
,
4697 VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
);
4698 dst_state
->aux_usage
=
4699 anv_layout_to_aux_usage(&cmd_buffer
->device
->info
, dst_iview
->image
,
4700 VK_IMAGE_ASPECT_DEPTH_BIT
,
4701 VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
);
4702 dst_state
->current_layout
= VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
;
4704 enum blorp_filter filter
=
4705 vk_to_blorp_resolve_mode(subpass
->depth_resolve_mode
);
4707 anv_image_msaa_resolve(cmd_buffer
,
4708 src_iview
->image
, src_state
->aux_usage
,
4709 src_iview
->planes
[0].isl
.base_level
,
4710 src_iview
->planes
[0].isl
.base_array_layer
,
4711 dst_iview
->image
, dst_state
->aux_usage
,
4712 dst_iview
->planes
[0].isl
.base_level
,
4713 dst_iview
->planes
[0].isl
.base_array_layer
,
4714 VK_IMAGE_ASPECT_DEPTH_BIT
,
4715 render_area
.offset
.x
, render_area
.offset
.y
,
4716 render_area
.offset
.x
, render_area
.offset
.y
,
4717 render_area
.extent
.width
,
4718 render_area
.extent
.height
,
4719 fb
->layers
, filter
);
4722 if ((src_iview
->image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
) &&
4723 subpass
->stencil_resolve_mode
!= VK_RESOLVE_MODE_NONE_KHR
) {
4725 src_state
->current_stencil_layout
= VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
;
4726 dst_state
->current_stencil_layout
= VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
;
4728 enum isl_aux_usage src_aux_usage
= ISL_AUX_USAGE_NONE
;
4729 enum isl_aux_usage dst_aux_usage
= ISL_AUX_USAGE_NONE
;
4731 enum blorp_filter filter
=
4732 vk_to_blorp_resolve_mode(subpass
->stencil_resolve_mode
);
4734 anv_image_msaa_resolve(cmd_buffer
,
4735 src_iview
->image
, src_aux_usage
,
4736 src_iview
->planes
[0].isl
.base_level
,
4737 src_iview
->planes
[0].isl
.base_array_layer
,
4738 dst_iview
->image
, dst_aux_usage
,
4739 dst_iview
->planes
[0].isl
.base_level
,
4740 dst_iview
->planes
[0].isl
.base_array_layer
,
4741 VK_IMAGE_ASPECT_STENCIL_BIT
,
4742 render_area
.offset
.x
, render_area
.offset
.y
,
4743 render_area
.offset
.x
, render_area
.offset
.y
,
4744 render_area
.extent
.width
,
4745 render_area
.extent
.height
,
4746 fb
->layers
, filter
);
4751 /* On gen7, we have to store a texturable version of the stencil buffer in
4752 * a shadow whenever VK_IMAGE_USAGE_SAMPLED_BIT is set and copy back and
4753 * forth at strategic points. Stencil writes are only allowed in following
4756 * - VK_IMAGE_LAYOUT_GENERAL
4757 * - VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
4758 * - VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL
4759 * - VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL
4760 * - VK_IMAGE_LAYOUT_STENCIL_ATTACHMENT_OPTIMAL_KHR
4762 * For general, we have no nice opportunity to transition so we do the copy
4763 * to the shadow unconditionally at the end of the subpass. For transfer
4764 * destinations, we can update it as part of the transfer op. For the other
4765 * layouts, we delay the copy until a transition into some other layout.
4767 if (subpass
->depth_stencil_attachment
) {
4768 uint32_t a
= subpass
->depth_stencil_attachment
->attachment
;
4769 assert(a
!= VK_ATTACHMENT_UNUSED
);
4771 struct anv_attachment_state
*att_state
= &cmd_state
->attachments
[a
];
4772 struct anv_image_view
*iview
= cmd_state
->attachments
[a
].image_view
;;
4773 const struct anv_image
*image
= iview
->image
;
4775 if (image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
4776 uint32_t plane
= anv_image_aspect_to_plane(image
->aspects
,
4777 VK_IMAGE_ASPECT_STENCIL_BIT
);
4779 if (image
->planes
[plane
].shadow_surface
.isl
.size_B
> 0 &&
4780 att_state
->current_stencil_layout
== VK_IMAGE_LAYOUT_GENERAL
) {
4781 assert(image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
);
4782 anv_image_copy_to_shadow(cmd_buffer
, image
,
4783 VK_IMAGE_ASPECT_STENCIL_BIT
,
4784 iview
->planes
[plane
].isl
.base_level
, 1,
4785 iview
->planes
[plane
].isl
.base_array_layer
,
4790 #endif /* GEN_GEN == 7 */
4792 for (uint32_t i
= 0; i
< subpass
->attachment_count
; ++i
) {
4793 const uint32_t a
= subpass
->attachments
[i
].attachment
;
4794 if (a
== VK_ATTACHMENT_UNUSED
)
4797 if (cmd_state
->pass
->attachments
[a
].last_subpass_idx
!= subpass_id
)
4800 assert(a
< cmd_state
->pass
->attachment_count
);
4801 struct anv_attachment_state
*att_state
= &cmd_state
->attachments
[a
];
4802 struct anv_image_view
*iview
= cmd_state
->attachments
[a
].image_view
;
4803 const struct anv_image
*image
= iview
->image
;
4805 if ((image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) &&
4806 image
->vk_format
!= iview
->vk_format
) {
4807 enum anv_fast_clear_type fast_clear_type
=
4808 anv_layout_to_fast_clear_type(&cmd_buffer
->device
->info
,
4809 image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4810 att_state
->current_layout
);
4812 /* If any clear color was used, flush it down the aux surfaces. If we
4813 * don't do it now using the view's format we might use the clear
4814 * color incorrectly in the following resolves (for example with an
4815 * SRGB view & a UNORM image).
4817 if (fast_clear_type
!= ANV_FAST_CLEAR_NONE
) {
4818 anv_perf_warn(cmd_buffer
->device
->instance
, iview
,
4819 "Doing a partial resolve to get rid of clear color at the "
4820 "end of a renderpass due to an image/view format mismatch");
4822 uint32_t base_layer
, layer_count
;
4823 if (image
->type
== VK_IMAGE_TYPE_3D
) {
4825 layer_count
= anv_minify(iview
->image
->extent
.depth
,
4826 iview
->planes
[0].isl
.base_level
);
4828 base_layer
= iview
->planes
[0].isl
.base_array_layer
;
4829 layer_count
= fb
->layers
;
4832 for (uint32_t a
= 0; a
< layer_count
; a
++) {
4833 uint32_t array_layer
= base_layer
+ a
;
4834 if (image
->samples
== 1) {
4835 anv_cmd_predicated_ccs_resolve(cmd_buffer
, image
,
4836 iview
->planes
[0].isl
.format
,
4837 VK_IMAGE_ASPECT_COLOR_BIT
,
4838 iview
->planes
[0].isl
.base_level
,
4840 ISL_AUX_OP_PARTIAL_RESOLVE
,
4841 ANV_FAST_CLEAR_NONE
);
4843 anv_cmd_predicated_mcs_resolve(cmd_buffer
, image
,
4844 iview
->planes
[0].isl
.format
,
4845 VK_IMAGE_ASPECT_COLOR_BIT
,
4847 ISL_AUX_OP_PARTIAL_RESOLVE
,
4848 ANV_FAST_CLEAR_NONE
);
4854 /* Transition the image into the final layout for this render pass */
4855 VkImageLayout target_layout
=
4856 cmd_state
->pass
->attachments
[a
].final_layout
;
4857 VkImageLayout target_stencil_layout
=
4858 cmd_state
->pass
->attachments
[a
].stencil_final_layout
;
4860 uint32_t base_layer
, layer_count
;
4861 if (image
->type
== VK_IMAGE_TYPE_3D
) {
4863 layer_count
= anv_minify(iview
->image
->extent
.depth
,
4864 iview
->planes
[0].isl
.base_level
);
4866 base_layer
= iview
->planes
[0].isl
.base_array_layer
;
4867 layer_count
= fb
->layers
;
4870 if (image
->aspects
& VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV
) {
4871 assert(image
->aspects
== VK_IMAGE_ASPECT_COLOR_BIT
);
4872 transition_color_buffer(cmd_buffer
, image
, VK_IMAGE_ASPECT_COLOR_BIT
,
4873 iview
->planes
[0].isl
.base_level
, 1,
4874 base_layer
, layer_count
,
4875 att_state
->current_layout
, target_layout
);
4878 if (image
->aspects
& VK_IMAGE_ASPECT_DEPTH_BIT
) {
4879 transition_depth_buffer(cmd_buffer
, image
,
4880 att_state
->current_layout
, target_layout
);
4883 if (image
->aspects
& VK_IMAGE_ASPECT_STENCIL_BIT
) {
4884 transition_stencil_buffer(cmd_buffer
, image
,
4885 iview
->planes
[0].isl
.base_level
, 1,
4886 base_layer
, layer_count
,
4887 att_state
->current_stencil_layout
,
4888 target_stencil_layout
);
4892 /* Accumulate any subpass flushes that need to happen after the subpass.
4893 * Yes, they do get accumulated twice in the NextSubpass case but since
4894 * genX_CmdNextSubpass just calls end/begin back-to-back, we just end up
4895 * ORing the bits in twice so it's harmless.
4897 cmd_buffer
->state
.pending_pipe_bits
|=
4898 cmd_buffer
->state
.pass
->subpass_flushes
[subpass_id
+ 1];
4901 void genX(CmdBeginRenderPass
)(
4902 VkCommandBuffer commandBuffer
,
4903 const VkRenderPassBeginInfo
* pRenderPassBegin
,
4904 VkSubpassContents contents
)
4906 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
4907 ANV_FROM_HANDLE(anv_render_pass
, pass
, pRenderPassBegin
->renderPass
);
4908 ANV_FROM_HANDLE(anv_framebuffer
, framebuffer
, pRenderPassBegin
->framebuffer
);
4910 cmd_buffer
->state
.framebuffer
= framebuffer
;
4911 cmd_buffer
->state
.pass
= pass
;
4912 cmd_buffer
->state
.render_area
= pRenderPassBegin
->renderArea
;
4914 genX(cmd_buffer_setup_attachments
)(cmd_buffer
, pass
, pRenderPassBegin
);
4916 /* If we failed to setup the attachments we should not try to go further */
4917 if (result
!= VK_SUCCESS
) {
4918 assert(anv_batch_has_error(&cmd_buffer
->batch
));
4922 genX(flush_pipeline_select_3d
)(cmd_buffer
);
4924 cmd_buffer_begin_subpass(cmd_buffer
, 0);
4927 void genX(CmdBeginRenderPass2KHR
)(
4928 VkCommandBuffer commandBuffer
,
4929 const VkRenderPassBeginInfo
* pRenderPassBeginInfo
,
4930 const VkSubpassBeginInfoKHR
* pSubpassBeginInfo
)
4932 genX(CmdBeginRenderPass
)(commandBuffer
, pRenderPassBeginInfo
,
4933 pSubpassBeginInfo
->contents
);
4936 void genX(CmdNextSubpass
)(
4937 VkCommandBuffer commandBuffer
,
4938 VkSubpassContents contents
)
4940 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
4942 if (anv_batch_has_error(&cmd_buffer
->batch
))
4945 assert(cmd_buffer
->level
== VK_COMMAND_BUFFER_LEVEL_PRIMARY
);
4947 uint32_t prev_subpass
= anv_get_subpass_id(&cmd_buffer
->state
);
4948 cmd_buffer_end_subpass(cmd_buffer
);
4949 cmd_buffer_begin_subpass(cmd_buffer
, prev_subpass
+ 1);
4952 void genX(CmdNextSubpass2KHR
)(
4953 VkCommandBuffer commandBuffer
,
4954 const VkSubpassBeginInfoKHR
* pSubpassBeginInfo
,
4955 const VkSubpassEndInfoKHR
* pSubpassEndInfo
)
4957 genX(CmdNextSubpass
)(commandBuffer
, pSubpassBeginInfo
->contents
);
4960 void genX(CmdEndRenderPass
)(
4961 VkCommandBuffer commandBuffer
)
4963 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
4965 if (anv_batch_has_error(&cmd_buffer
->batch
))
4968 cmd_buffer_end_subpass(cmd_buffer
);
4970 cmd_buffer
->state
.hiz_enabled
= false;
4973 anv_dump_add_attachments(cmd_buffer
);
4976 /* Remove references to render pass specific state. This enables us to
4977 * detect whether or not we're in a renderpass.
4979 cmd_buffer
->state
.framebuffer
= NULL
;
4980 cmd_buffer
->state
.pass
= NULL
;
4981 cmd_buffer
->state
.subpass
= NULL
;
4984 void genX(CmdEndRenderPass2KHR
)(
4985 VkCommandBuffer commandBuffer
,
4986 const VkSubpassEndInfoKHR
* pSubpassEndInfo
)
4988 genX(CmdEndRenderPass
)(commandBuffer
);
4992 genX(cmd_emit_conditional_render_predicate
)(struct anv_cmd_buffer
*cmd_buffer
)
4994 #if GEN_GEN >= 8 || GEN_IS_HASWELL
4995 struct gen_mi_builder b
;
4996 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
4998 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC0
),
4999 gen_mi_reg32(ANV_PREDICATE_RESULT_REG
));
5000 gen_mi_store(&b
, gen_mi_reg64(MI_PREDICATE_SRC1
), gen_mi_imm(0));
5002 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_PREDICATE
), mip
) {
5003 mip
.LoadOperation
= LOAD_LOADINV
;
5004 mip
.CombineOperation
= COMBINE_SET
;
5005 mip
.CompareOperation
= COMPARE_SRCS_EQUAL
;
5010 #if GEN_GEN >= 8 || GEN_IS_HASWELL
5011 void genX(CmdBeginConditionalRenderingEXT
)(
5012 VkCommandBuffer commandBuffer
,
5013 const VkConditionalRenderingBeginInfoEXT
* pConditionalRenderingBegin
)
5015 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5016 ANV_FROM_HANDLE(anv_buffer
, buffer
, pConditionalRenderingBegin
->buffer
);
5017 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
5018 struct anv_address value_address
=
5019 anv_address_add(buffer
->address
, pConditionalRenderingBegin
->offset
);
5021 const bool isInverted
= pConditionalRenderingBegin
->flags
&
5022 VK_CONDITIONAL_RENDERING_INVERTED_BIT_EXT
;
5024 cmd_state
->conditional_render_enabled
= true;
5026 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
5028 struct gen_mi_builder b
;
5029 gen_mi_builder_init(&b
, &cmd_buffer
->batch
);
5031 /* Section 19.4 of the Vulkan 1.1.85 spec says:
5033 * If the value of the predicate in buffer memory changes
5034 * while conditional rendering is active, the rendering commands
5035 * may be discarded in an implementation-dependent way.
5036 * Some implementations may latch the value of the predicate
5037 * upon beginning conditional rendering while others
5038 * may read it before every rendering command.
5040 * So it's perfectly fine to read a value from the buffer once.
5042 struct gen_mi_value value
= gen_mi_mem32(value_address
);
5044 /* Precompute predicate result, it is necessary to support secondary
5045 * command buffers since it is unknown if conditional rendering is
5046 * inverted when populating them.
5048 gen_mi_store(&b
, gen_mi_reg64(ANV_PREDICATE_RESULT_REG
),
5049 isInverted
? gen_mi_uge(&b
, gen_mi_imm(0), value
) :
5050 gen_mi_ult(&b
, gen_mi_imm(0), value
));
5053 void genX(CmdEndConditionalRenderingEXT
)(
5054 VkCommandBuffer commandBuffer
)
5056 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5057 struct anv_cmd_state
*cmd_state
= &cmd_buffer
->state
;
5059 cmd_state
->conditional_render_enabled
= false;
5063 /* Set of stage bits for which are pipelined, i.e. they get queued by the
5064 * command streamer for later execution.
5066 #define ANV_PIPELINE_STAGE_PIPELINED_BITS \
5067 (VK_PIPELINE_STAGE_VERTEX_INPUT_BIT | \
5068 VK_PIPELINE_STAGE_VERTEX_SHADER_BIT | \
5069 VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT | \
5070 VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT | \
5071 VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT | \
5072 VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT | \
5073 VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT | \
5074 VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT | \
5075 VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT | \
5076 VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT | \
5077 VK_PIPELINE_STAGE_TRANSFER_BIT | \
5078 VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT | \
5079 VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT | \
5080 VK_PIPELINE_STAGE_ALL_COMMANDS_BIT)
5082 void genX(CmdSetEvent
)(
5083 VkCommandBuffer commandBuffer
,
5085 VkPipelineStageFlags stageMask
)
5087 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5088 ANV_FROM_HANDLE(anv_event
, event
, _event
);
5090 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
5091 if (stageMask
& ANV_PIPELINE_STAGE_PIPELINED_BITS
) {
5092 pc
.StallAtPixelScoreboard
= true;
5093 pc
.CommandStreamerStallEnable
= true;
5096 pc
.DestinationAddressType
= DAT_PPGTT
,
5097 pc
.PostSyncOperation
= WriteImmediateData
,
5098 pc
.Address
= (struct anv_address
) {
5099 cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
5102 pc
.ImmediateData
= VK_EVENT_SET
;
5106 void genX(CmdResetEvent
)(
5107 VkCommandBuffer commandBuffer
,
5109 VkPipelineStageFlags stageMask
)
5111 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5112 ANV_FROM_HANDLE(anv_event
, event
, _event
);
5114 anv_batch_emit(&cmd_buffer
->batch
, GENX(PIPE_CONTROL
), pc
) {
5115 if (stageMask
& ANV_PIPELINE_STAGE_PIPELINED_BITS
) {
5116 pc
.StallAtPixelScoreboard
= true;
5117 pc
.CommandStreamerStallEnable
= true;
5120 pc
.DestinationAddressType
= DAT_PPGTT
;
5121 pc
.PostSyncOperation
= WriteImmediateData
;
5122 pc
.Address
= (struct anv_address
) {
5123 cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
5126 pc
.ImmediateData
= VK_EVENT_RESET
;
5130 void genX(CmdWaitEvents
)(
5131 VkCommandBuffer commandBuffer
,
5132 uint32_t eventCount
,
5133 const VkEvent
* pEvents
,
5134 VkPipelineStageFlags srcStageMask
,
5135 VkPipelineStageFlags destStageMask
,
5136 uint32_t memoryBarrierCount
,
5137 const VkMemoryBarrier
* pMemoryBarriers
,
5138 uint32_t bufferMemoryBarrierCount
,
5139 const VkBufferMemoryBarrier
* pBufferMemoryBarriers
,
5140 uint32_t imageMemoryBarrierCount
,
5141 const VkImageMemoryBarrier
* pImageMemoryBarriers
)
5144 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5146 for (uint32_t i
= 0; i
< eventCount
; i
++) {
5147 ANV_FROM_HANDLE(anv_event
, event
, pEvents
[i
]);
5149 anv_batch_emit(&cmd_buffer
->batch
, GENX(MI_SEMAPHORE_WAIT
), sem
) {
5150 sem
.WaitMode
= PollingMode
,
5151 sem
.CompareOperation
= COMPARE_SAD_EQUAL_SDD
,
5152 sem
.SemaphoreDataDword
= VK_EVENT_SET
,
5153 sem
.SemaphoreAddress
= (struct anv_address
) {
5154 cmd_buffer
->device
->dynamic_state_pool
.block_pool
.bo
,
5160 anv_finishme("Implement events on gen7");
5163 genX(CmdPipelineBarrier
)(commandBuffer
, srcStageMask
, destStageMask
,
5164 false, /* byRegion */
5165 memoryBarrierCount
, pMemoryBarriers
,
5166 bufferMemoryBarrierCount
, pBufferMemoryBarriers
,
5167 imageMemoryBarrierCount
, pImageMemoryBarriers
);
5170 VkResult
genX(CmdSetPerformanceOverrideINTEL
)(
5171 VkCommandBuffer commandBuffer
,
5172 const VkPerformanceOverrideInfoINTEL
* pOverrideInfo
)
5174 ANV_FROM_HANDLE(anv_cmd_buffer
, cmd_buffer
, commandBuffer
);
5176 switch (pOverrideInfo
->type
) {
5177 case VK_PERFORMANCE_OVERRIDE_TYPE_NULL_HARDWARE_INTEL
: {
5181 anv_pack_struct(&dw
, GENX(CS_DEBUG_MODE2
),
5182 ._3DRenderingInstructionDisable
= pOverrideInfo
->enable
,
5183 .MediaInstructionDisable
= pOverrideInfo
->enable
,
5184 ._3DRenderingInstructionDisableMask
= true,
5185 .MediaInstructionDisableMask
= true);
5186 emit_lri(&cmd_buffer
->batch
, GENX(CS_DEBUG_MODE2_num
), dw
);
5188 anv_pack_struct(&dw
, GENX(INSTPM
),
5189 ._3DRenderingInstructionDisable
= pOverrideInfo
->enable
,
5190 .MediaInstructionDisable
= pOverrideInfo
->enable
,
5191 ._3DRenderingInstructionDisableMask
= true,
5192 .MediaInstructionDisableMask
= true);
5193 emit_lri(&cmd_buffer
->batch
, GENX(INSTPM_num
), dw
);
5198 case VK_PERFORMANCE_OVERRIDE_TYPE_FLUSH_GPU_CACHES_INTEL
:
5199 if (pOverrideInfo
->enable
) {
5200 /* FLUSH ALL THE THINGS! As requested by the MDAPI team. */
5201 cmd_buffer
->state
.pending_pipe_bits
|=
5202 ANV_PIPE_FLUSH_BITS
|
5203 ANV_PIPE_INVALIDATE_BITS
;
5204 genX(cmd_buffer_apply_pipe_flushes
)(cmd_buffer
);
5209 unreachable("Invalid override");
5215 VkResult
genX(CmdSetPerformanceStreamMarkerINTEL
)(
5216 VkCommandBuffer commandBuffer
,
5217 const VkPerformanceStreamMarkerInfoINTEL
* pMarkerInfo
)
5219 /* TODO: Waiting on the register to write, might depend on generation. */