f5a0ade15358762db8305dd756c7856044d160e6
2 * Copyright (c) 2001-2005 The Regents of The University of Michigan
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 * Authors: Ron Dreslinski
32 #include <sys/types.h>
43 #include "base/misc.hh"
44 #include "config/full_system.hh"
45 #include "mem/packet_impl.hh"
46 #include "mem/physical.hh"
47 #include "sim/host.hh"
48 #include "sim/builder.hh"
49 #include "sim/eventq.hh"
50 #include "arch/isa_traits.hh"
54 using namespace TheISA
;
57 PhysicalMemory::PhysicalMemory(Params
*p
)
58 : MemObject(p
->name
), pmemAddr(NULL
), port(NULL
), lat(p
->latency
), _params(p
)
60 if (params()->addrRange
.size() % TheISA::PageBytes
!= 0)
61 panic("Memory Size not divisible by page size\n");
63 int map_flags
= MAP_ANON
| MAP_PRIVATE
;
64 pmemAddr
= (uint8_t *)mmap(NULL
, params()->addrRange
.size(), PROT_READ
| PROT_WRITE
,
67 if (pmemAddr
== (void *)MAP_FAILED
) {
69 fatal("Could not mmap!\n");
76 PhysicalMemory::init()
79 panic("PhysicalMemory not connected to anything!");
80 port
->sendStatusChange(Port::RangeChange
);
83 PhysicalMemory::~PhysicalMemory()
86 munmap(pmemAddr
, params()->addrRange
.size());
91 PhysicalMemory::new_page()
93 Addr return_addr
= pagePtr
<< LogVMPageSize
;
94 return_addr
+= params()->addrRange
.start
;
101 PhysicalMemory::deviceBlockSize()
103 //Can accept anysize request
108 PhysicalMemory::calculateLatency(Packet
*pkt
)
115 // Add load-locked to tracking list. Should only be called if the
116 // operation is a load and the LOCKED flag is set.
118 PhysicalMemory::trackLoadLocked(Request
*req
)
120 Addr paddr
= LockedAddr::mask(req
->getPaddr());
122 // first we check if we already have a locked addr for this
123 // xc. Since each xc only gets one, we just update the
124 // existing record with the new address.
125 list
<LockedAddr
>::iterator i
;
127 for (i
= lockedAddrList
.begin(); i
!= lockedAddrList
.end(); ++i
) {
128 if (i
->matchesContext(req
)) {
129 DPRINTF(LLSC
, "Modifying lock record: cpu %d thread %d addr %#x\n",
130 req
->getCpuNum(), req
->getThreadNum(), paddr
);
136 // no record for this xc: need to allocate a new one
137 DPRINTF(LLSC
, "Adding lock record: cpu %d thread %d addr %#x\n",
138 req
->getCpuNum(), req
->getThreadNum(), paddr
);
139 lockedAddrList
.push_front(LockedAddr(req
));
143 // Called on *writes* only... both regular stores and
144 // store-conditional operations. Check for conventional stores which
145 // conflict with locked addresses, and for success/failure of store
148 PhysicalMemory::checkLockedAddrList(Request
*req
)
150 Addr paddr
= LockedAddr::mask(req
->getPaddr());
151 bool isLocked
= req
->isLocked();
153 // Initialize return value. Non-conditional stores always
154 // succeed. Assume conditional stores will fail until proven
156 bool success
= !isLocked
;
158 // Iterate over list. Note that there could be multiple matching
159 // records, as more than one context could have done a load locked
161 list
<LockedAddr
>::iterator i
= lockedAddrList
.begin();
163 while (i
!= lockedAddrList
.end()) {
165 if (i
->addr
== paddr
) {
166 // we have a matching address
168 if (isLocked
&& i
->matchesContext(req
)) {
169 // it's a store conditional, and as far as the memory
170 // system can tell, the requesting context's lock is
172 DPRINTF(LLSC
, "StCond success: cpu %d thread %d addr %#x\n",
173 req
->getCpuNum(), req
->getThreadNum(), paddr
);
177 // Get rid of our record of this lock and advance to next
178 DPRINTF(LLSC
, "Erasing lock record: cpu %d thread %d addr %#x\n",
179 i
->cpuNum
, i
->threadNum
, paddr
);
180 i
= lockedAddrList
.erase(i
);
183 // no match: advance to next record
189 req
->setScResult(success
? 1 : 0);
196 PhysicalMemory::doFunctionalAccess(Packet
*pkt
)
198 assert(pkt
->getAddr() + pkt
->getSize() <= params()->addrRange
.size());
201 if (pkt
->req
->isLocked()) {
202 trackLoadLocked(pkt
->req
);
204 DPRINTF(MemoryAccess
, "Performing Read of size %i on address 0x%x\n",
205 pkt
->getSize(), pkt
->getAddr());
206 memcpy(pkt
->getPtr
<uint8_t>(),
207 pmemAddr
+ pkt
->getAddr() - params()->addrRange
.start
,
210 else if (pkt
->isWrite()) {
211 if (writeOK(pkt
->req
)) {
212 DPRINTF(MemoryAccess
, "Performing Write of size %i on address 0x%x\n",
213 pkt
->getSize(), pkt
->getAddr());
214 memcpy(pmemAddr
+ pkt
->getAddr() - params()->addrRange
.start
,
215 pkt
->getPtr
<uint8_t>(), pkt
->getSize());
218 else if (pkt
->isInvalidate()) {
219 //upgrade or invalidate
220 pkt
->flags
|= SATISFIED
;
223 panic("unimplemented");
226 pkt
->result
= Packet::Success
;
230 PhysicalMemory::getPort(const std::string
&if_name
, int idx
)
232 if (if_name
== "port" && idx
== -1) {
234 panic("PhysicalMemory::getPort: additional port requested to memory!");
235 port
= new MemoryPort(name() + "-port", this);
237 } else if (if_name
== "functional") {
238 /* special port for functional writes at startup. And for memtester */
239 return new MemoryPort(name() + "-funcport", this);
241 panic("PhysicalMemory::getPort: unknown port %s requested", if_name
);
246 PhysicalMemory::recvStatusChange(Port::Status status
)
250 PhysicalMemory::MemoryPort::MemoryPort(const std::string
&_name
,
251 PhysicalMemory
*_memory
)
252 : SimpleTimingPort(_name
), memory(_memory
)
256 PhysicalMemory::MemoryPort::recvStatusChange(Port::Status status
)
258 memory
->recvStatusChange(status
);
262 PhysicalMemory::MemoryPort::getDeviceAddressRanges(AddrRangeList
&resp
,
263 AddrRangeList
&snoop
)
265 memory
->getAddressRanges(resp
, snoop
);
269 PhysicalMemory::getAddressRanges(AddrRangeList
&resp
, AddrRangeList
&snoop
)
273 resp
.push_back(RangeSize(params()->addrRange
.start
,
274 params()->addrRange
.size()));
278 PhysicalMemory::MemoryPort::deviceBlockSize()
280 return memory
->deviceBlockSize();
284 PhysicalMemory::MemoryPort::recvAtomic(Packet
*pkt
)
286 memory
->doFunctionalAccess(pkt
);
287 return memory
->calculateLatency(pkt
);
291 PhysicalMemory::MemoryPort::recvFunctional(Packet
*pkt
)
293 // Default implementation of SimpleTimingPort::recvFunctional()
294 // calls recvAtomic() and throws away the latency; we can save a
295 // little here by just not calculating the latency.
296 memory
->doFunctionalAccess(pkt
);
300 PhysicalMemory::drain(Event
*de
)
302 int count
= port
->drain(de
);
304 changeState(Draining
);
306 changeState(Drained
);
311 PhysicalMemory::serialize(ostream
&os
)
313 gzFile compressedMem
;
314 string filename
= name() + ".physmem";
316 SERIALIZE_SCALAR(filename
);
319 string thefile
= Checkpoint::dir() + "/" + filename
.c_str();
320 int fd
= creat(thefile
.c_str(), 0664);
323 fatal("Can't open physical memory checkpoint file '%s'\n", filename
);
326 compressedMem
= gzdopen(fd
, "wb");
327 if (compressedMem
== NULL
)
328 fatal("Insufficient memory to allocate compression state for %s\n",
331 if (gzwrite(compressedMem
, pmemAddr
, params()->addrRange
.size()) != params()->addrRange
.size()) {
332 fatal("Write failed on physical memory checkpoint file '%s'\n",
336 if (gzclose(compressedMem
))
337 fatal("Close failed on physical memory checkpoint file '%s'\n",
342 PhysicalMemory::unserialize(Checkpoint
*cp
, const string
§ion
)
344 gzFile compressedMem
;
349 const int chunkSize
= 16384;
354 UNSERIALIZE_SCALAR(filename
);
356 filename
= cp
->cptDir
+ "/" + filename
;
359 int fd
= open(filename
.c_str(), O_RDONLY
);
362 fatal("Can't open physical memory checkpoint file '%s'", filename
);
365 compressedMem
= gzdopen(fd
, "rb");
366 if (compressedMem
== NULL
)
367 fatal("Insufficient memory to allocate compression state for %s\n",
370 // unmap file that was mmaped in the constructor
371 // This is done here to make sure that gzip and open don't muck with our
372 // nice large space of memory before we reallocate it
373 munmap(pmemAddr
, params()->addrRange
.size());
375 pmemAddr
= (uint8_t *)mmap(NULL
, params()->addrRange
.size(), PROT_READ
| PROT_WRITE
,
376 MAP_ANON
| MAP_PRIVATE
, -1, 0);
378 if (pmemAddr
== (void *)MAP_FAILED
) {
380 fatal("Could not mmap physical memory!\n");
384 tempPage
= (long*)malloc(chunkSize
);
385 if (tempPage
== NULL
)
386 fatal("Unable to malloc memory to read file %s\n", filename
);
388 /* Only copy bytes that are non-zero, so we don't give the VM system hell */
389 while (curSize
< params()->addrRange
.size()) {
390 bytesRead
= gzread(compressedMem
, tempPage
, chunkSize
);
391 if (bytesRead
!= chunkSize
&& bytesRead
!= params()->addrRange
.size() - curSize
)
392 fatal("Read failed on physical memory checkpoint file '%s'"
393 " got %d bytes, expected %d or %d bytes\n",
394 filename
, bytesRead
, chunkSize
, params()->addrRange
.size()-curSize
);
396 assert(bytesRead
% sizeof(long) == 0);
398 for (int x
= 0; x
< bytesRead
/sizeof(long); x
++)
400 if (*(tempPage
+x
) != 0) {
401 pmem_current
= (long*)(pmemAddr
+ curSize
+ x
* sizeof(long));
402 *pmem_current
= *(tempPage
+x
);
405 curSize
+= bytesRead
;
410 if (gzclose(compressedMem
))
411 fatal("Close failed on physical memory checkpoint file '%s'\n",
417 BEGIN_DECLARE_SIM_OBJECT_PARAMS(PhysicalMemory
)
420 Param
<Range
<Addr
> > range
;
423 END_DECLARE_SIM_OBJECT_PARAMS(PhysicalMemory
)
425 BEGIN_INIT_SIM_OBJECT_PARAMS(PhysicalMemory
)
427 INIT_PARAM_DFLT(file
, "memory mapped file", ""),
428 INIT_PARAM(range
, "Device Address Range"),
429 INIT_PARAM(latency
, "Memory access latency")
431 END_INIT_SIM_OBJECT_PARAMS(PhysicalMemory
)
433 CREATE_SIM_OBJECT(PhysicalMemory
)
435 PhysicalMemory::Params
*p
= new PhysicalMemory::Params
;
436 p
->name
= getInstanceName();
437 p
->addrRange
= range
;
438 p
->latency
= latency
;
439 return new PhysicalMemory(p
);
442 REGISTER_SIM_OBJECT("PhysicalMemory", PhysicalMemory
)