1 # ================================== Steps to add peripherals ============
2 # Step-1: create interface declaration for the peripheral to be added.
3 # Remember these are interfaces defined for the pinmux and hence
4 # will be opposite to those defined at the peripheral.
5 # For eg. the output TX from the UART will be input (method Action)
7 # These changes will have to be done in interface_decl.py
8 # Step-2 define the wires that will be required to transfer data from the
9 # peripheral interface to the IO cell and vice-versa. Create a
10 # mkDWire for each input/output between the peripheral and the
11 # pinmux. Also create an implicit wire of GenericIOType for each cell
12 # that can be connected to a each bit from the peripheral.
13 # These changes will have to be done in wire_def.py
14 # Step-3: create the definitions for each of the methods defined above.
15 # These changes will have to be done in interface_decl.py
16 # ========================================================================
18 # default module imports
24 # project module imports
25 from interface_decl
import *
26 from interface_def
import *
28 from wire_def
import *
29 from actual_pinmux
import *
31 if not os
.path
.exists("bsv_src"):
32 os
.makedirs("bsv_src")
34 bsv_file
= open("./bsv_src/pinmux.bsv", "w")
38 This BSV file has been generated by the PinMux tool available at:
39 https://bitbucket.org/casl/pinmux.
41 Authors: Neel Gala, Luke
42 Date of generation: ''' + time
.strftime("%c") + '''
45 header
= copyright
+'''
49 Bit#(1) outputval; // output from core to pad bit7
50 Bit#(1) output_en; // output enable from core to pad bit6
51 Bit#(1) input_en; // input enable from core to io_cell bit5
52 Bit#(1) pullup_en; // pullup enable from core to io_cell bit4
53 Bit#(1) pulldown_en; // pulldown enable from core to io_cell bit3
54 Bit#(1) drivestrength; // drivestrength from core to io_cell bit2
55 Bit#(1) pushpull_en; // pushpull enable from core to io_cell bit1
56 Bit#(1) opendrain_en; // opendrain enable form core to io_cell bit0
57 } GenericIOType deriving(Eq,Bits,FShow);
59 interface MuxSelectionLines;
66 # ============================================#
67 # ==== populating the file with the code =====#
68 # ============================================#
70 # package and interface declaration followed by the generic io_cell definition
71 bsv_file
.write(header
)
75 // declare the method which will capture the user pin-mux
76 // selection values.The width of the input is dependent on the number
77 // of muxes happening per IO. For now we have a generalized width
78 // where each IO will have the same number of muxes.''')
80 for cell
in muxed_cells
:
81 bsv_file
.write(mux_interface
.format(cell
[0],
82 int(math
.log(len(cell
) - 1, 2))))
87 interface PeripheralSide;
88 // declare the interface to the IO cells.
89 // Each IO cell will have 8 input field (output from pin mux
90 // and on output field (input to pinmux)''')
91 for i
in range(0, N_IO
):
92 bsv_file
.write('''\n // interface for IO CEll-{0}''')
93 bsv_file
.write(io_interface
.format(i
))
94 # ==============================================================
96 # == create method definitions for all peripheral interfaces ==#
97 for i
in range(0, N_UART
):
99 // interface declaration between UART-{0} and pinmux'''.format(i
))
100 bsv_file
.write(uartinterface_decl
.format(i
))
102 for i
in range(0, N_SPI
):
104 // interface declaration between SPI-{0} and pinmux'''.format(i
))
105 bsv_file
.write(spiinterface_decl
.format(i
))
107 for i
in range(0, N_TWI
):
109 // interface declaration between TWI-{0} and pinmux'''.format(i
))
110 bsv_file
.write(twiinterface_decl
.format(i
))
112 for i
in range(0, N_SD
):
114 // interface declaration between SD-{0} and pinmux'''.format(i
))
115 bsv_file
.write(sdinterface_decl
.format(i
))
117 for i
in range(0, N_JTAG
):
119 // interface declaration between JTAG-{0} and pinmux'''.format(i
))
120 bsv_file
.write(jtaginterface_decl
.format(i
))
122 for i
in range(0, N_PWM
):
124 // interface declaration between PWM-{0} and pinmux'''.format(i
))
125 bsv_file
.write(pwminterface_decl
.format(i
))
126 # ==============================================================
128 # ===== finish interface definition and start module definition=======
132 interface Ifc_pinmux;
133 interface MuxSelectionLines mux_lines;
134 interface PeripheralSide peripheral_side;
137 module mkpinmux(Ifc_pinmux);
139 # ====================================================================
141 # ======================= create wire and registers =================#
143 // the followins wires capture the pin-mux selection
144 // values for each mux assigned to a CELL
146 for cell
in muxed_cells
:
147 bsv_file
.write(muxwire
.format(cell
[0], int(math
.log(len(cell
) - 1, 2))))
151 '''\n // following wires capture the values sent to the IO Cell''')
152 for i
in range(0, N_IO
):
153 bsv_file
.write(generic_io
.format(i
))
155 for i
in range(0, N_UART
):
157 '''\n // following wires capture signals to IO CELL if uart-{0} is
158 // allotted to it'''.format(i
))
159 bsv_file
.write(uartwires
.format(i
))
161 for i
in range(0, N_SPI
):
163 '''\n // following wires capture signals to IO CELL if spi-{0} is
164 // allotted to it'''.format(i
))
165 bsv_file
.write(spiwires
.format(i
))
167 for i
in range(0, N_TWI
):
169 '''\n // following wires capture signals to IO CELL if twi-{0} is
170 // allotted to it'''.format(i
))
171 bsv_file
.write(twiwires
.format(i
))
173 for i
in range(0, N_SD
):
175 '''\n // following wires capture signals to IO CELL if sd-{0} is
176 // allotted to it'''.format(i
))
177 bsv_file
.write(sdwires
.format(i
))
179 for i
in range(0, N_JTAG
):
181 '''\n // following wires capture signals to IO CELL if jtag-{0} is
182 // allotted to it'''.format(i
))
183 bsv_file
.write(jtagwires
.format(i
))
185 for i
in range(0, N_PWM
):
187 '''\n // following wires capture signals to IO CELL if pwm-{0} is
188 // allotted to it'''.format(i
))
189 bsv_file
.write(pwmwires
.format(i
))
191 # ====================================================================
192 # ========================= Actual pinmuxing ========================#
194 /*====== This where the muxing starts for each io-cell======*/
196 bsv_file
.write(pinmux
)
198 /*============================================================*/
200 # ====================================================================
201 # ================= interface definitions for each method =============#
203 interface mux_lines = interface MuxSelectionLines
205 for cell
in muxed_cells
:
206 bsv_file
.write(mux_interface_def
.format(cell
[0],
207 int(math
.log(len(cell
) - 1, 2))))
210 interface peripheral_side = interface PeripheralSide
212 for i
in range(0, N_IO
):
213 bsv_file
.write(io_interface_def
.format(i
))
214 for i
in range(0, N_UART
):
215 bsv_file
.write(uartinterface_def
.format(i
))
216 for i
in range(0, N_SPI
):
217 bsv_file
.write(spiinterface_def
.format(i
))
218 for i
in range(0, N_TWI
):
219 bsv_file
.write(twiinterface_def
.format(i
))
220 for i
in range(0, N_SD
):
221 bsv_file
.write(sdinterface_def
.format(i
))
222 for i
in range(0, N_JTAG
):
223 bsv_file
.write(jtaginterface_def
.format(i
))
224 for i
in range(0, N_PWM
):
225 bsv_file
.write(pwminterface_def
.format(i
))
226 bsv_file
.write(footer
)
227 print("BSV file successfully generated: bsv_src/pinmux.bsv")
228 # ======================================================================
231 bsv_file
= open('bsv_src/PinTop.bsv', 'w')
232 bsv_file
.write(copyright
+'''
235 interface Ifc_PintTop;
236 method ActionValue#(Bool) write(Bit#({0}) addr, Bit#({1}) data);
237 method Tuple2#(Bool,Bit#({1})) read(Bit#({0}) addr);
238 interface PeripheralSide peripheral_side;
241 module mkPinTop(Ifc_PintTop);
242 // instantiate the pin-mux module here
243 Ifc_pinmux pinmux <-mkpinmux;
245 // declare the registers which will be used to mux the IOs
246 '''.format(ADDR_WIDTH
, DATA_WIDTH
))
248 for cell
in muxed_cells
:
250 Reg#(Bit#({0})) rg_muxio_{1} <-mkReg(0);'''.format(
251 int(math
.log(len(cell
) - 1, 2)), cell
[0]))
254 // rule to connect the registers to the selection lines of the
256 rule connect_selection_registers;''')
258 for cell
in muxed_cells
:
260 pinmux.mux_lines.cell{0}_mux(rg_muxio_{0});'''.format(cell
[0]))
264 // method definitions for the write user interface
265 method ActionValue#(Bool) write(Bit#({2}) addr, Bit#({3}) data);
267 case (addr[{0}:{1}])'''.format(upper_offset
, lower_offset
,
268 ADDR_WIDTH
, DATA_WIDTH
))
270 for cell
in muxed_cells
:
272 {0}: rg_muxio_{1}<=truncate(data);'''.format(index
, cell
[0]))
282 // method definitions for the read user interface
283 method Tuple2#(Bool,Bit#({3})) read(Bit#({2}) addr);
286 case (addr[{0}:{1}])'''.format(upper_offset
, lower_offset
,
287 ADDR_WIDTH
, DATA_WIDTH
))
289 for cell
in muxed_cells
:
291 {0}: data=zeroExtend(rg_muxio_{1});'''.format(index
, cell
[0]))
297 return tuple2(err,data);
299 interface peripheral_side=pinmux.peripheral_side;